Tag Archives: Whole Foods Market (Ann Arbor MI)

2015/10/31 (S) Boo!

Leave a reply

We overslept a bit this morning and did not get up until 7:20 AM.  We dressed quickly and drove to breakfast separately as we had to go to separate places afterwards.  We got there at 8 AM and had a nice chat with the folks at our end of the table.  It was a big group this week, at least 24 people, maybe more.

Linda left breakfast at 9:15 AM to meet Diane at Kensington Metropark at 9:30 and go walking.  I lingered at the restaurant until after 9:30.  I drove back to I-96 and Grand River Avenue in Brighton, where I filled my fuel tank at the Shell station, and had a nice QSO with Mike (W8XH) while driving.  I then drove across the street to Brighton Ford to pick up the four spin-on coolant filter/conditioners I ordered yesterday.

Brighton Ford’s parts department is a NAPA outlet but they do not have any signs to that effect as Ford Motor Company won’t allow it.  My next stop was up Grand River Avenue towards Howell at the O’Reilly’s Auto Parts store where I picked up the nine (9) gallons of Chevron Delo 100 SAE 40 engine oil I ordered yesterday morning.  I drove home and chatted a bit more with Mike on the way.  I found out that he gets his Lawn tractor serviced at/by Sloan’s in Linden and is very pleased with them.  He has a trailer for transporting his lawn tractor and is willing to let me borrow it to transport ours when I am ready.

When I got home I unloaded the oil and filters and then emptied the dishwasher, refilled it, and started it.  I then went to my office to work.  I had an e-mail reply from Byron Pigg with information I needed to finish the article for Bus Conversion Magazine (BCM) about his 1985 Model 15 Eagle bus conversion.  I incorporated the new info into the Word docx and then called Byron on the phone.  We spent at least an hour going over the article and chatting about bus conversions.  After we wrapped up our conversation I worked a bit longer on the article making the last few edits and removing blemishes from two of photos.  I uploaded the article (Word docs) and all of the photo files (jpgs) to my BCM Dropbox folder at 2:15 PM and then e-mailed Gary (publisher), Mike (editor), and Jorge (layout).

Shawna gets Madeline into her Bumblebee costume for Halloween Trick-or-Treat in their neighborhood.

Shawna (back to camera) gets Madeline into her Bumblebee costume for Halloween Trick-or-Treat in their neighborhood.

While I was doing all of that Linda firmed up our Halloween plans with our son.  We left the house at 2:45 PM and drove to Ann Arbor, arriving at their house around 3:30.  Shawna got Madeline into her bumblebee costume and Linda gave her a Halloween gift bag with a rag doll, some candy, and a card.  At 4:15 we walked over to a neighbor’s house for a gathering that included snacks/dinner.  We talked to host Laurel’s parents, Tom and Kendra, who were there from San Diego, California.  All of the kids and most of the adults left at 5:15 to go door-to-door trick-or-treating on Granger Street.  Granger was closed off to vehicles for several blocks with policeman at each barricade and there were hundreds of people out and about.  Many of the adults were in costume, some quite elaborate, and it was quite a sight.

Madeline caught on very quickly to her role in all of this and would often walk past other, larger children right to the front of the line to get her treat.  She is just shy of three years old so it was cute.  One of the houses had two large pumpkins out front, appropriately carved.  They were real pumpkins and each weighed about 1,500 pounds when they were delivered by a truck.  Madeline is above average height for her age but these pumpkins towered over her.  The homeowners are well known in the neighborhood for having these giant pumpkins each year and bring in mind-boggling large quantities of candy in crates.  You gotta love neighbors like that.

The rain held off for most of the prime trick-or-treat window from 5 – 6 PM but I was cold and went back to the house a little ahead of everyone else.  It started to drizzle around the same time Madeline’s endurance was waning and they got back to the house at 6:30 with the umbrella deployed.  Madeline was eager to take stock of her Halloween “loot”.  We enjoyed watching her excitement at having different items to choose from and then “negotiating” with her parents over having to select just one item for this evening.  Halloween trick-or-treat is perhaps best appreciated while watching a three year old experience it.

We left around 7 PM and stopped at the nearby Whole Foods Market for soy creamer.  We picked up two bottles of Frey brand wine, a white and a red, and two pieces of vegan cake.  Frey makes organic wines without the use of animal products and are a sponsor of “Cooking School” with Christina Perillo on the PBS Create channel.

I got a call from Joe as we were getting ready to leave Whole Foods.  He was packed and ready to hit the road first thing in the morning.  He wasn’t sure if he would make it all the way to our house on Sunday or finish the trip early Monday morning.

It rained on the drive home and I took the wheel as Linda has a hard time with dark/wet roads.  We were reminded, once again, of the poor condition of Michigan’s roads, many of which need to be repainted and have reflectors installed such as the ones we saw in Florida the winter before last.  (I suspect that the reason Michigan does not use them is because of snow plows, but they really make it safer to drive dark roads at night.)  We got home sometime after 8 PM and had dessert.  I checked the bus for leaks buy did not find any new water.  I texted Joe our address, checked e-mail, and then opened the package from Rockler Woodworking that our postal carrier had delivered earlier in the day.

The maple veneer from Rockler was a bit darker than I had hoped, but it will still be a nice contrast to the walnut trim when suitably finished.  The two shelf brackets were certainly substantial enough but it remains to be seen if the wall of our coach is adequate to support the table without a leg to the floor.  The main issue will be the fasteners near the top which will be in tension and trying to pull out of the wall.  Of secondary concern will be the lower tip of the brackets, which will be in compression, trying to push through the wall and possibly puncturing it.  I may have to use expanding bolts or toggles rather than screws for the upper (tension) fasteners.

We had some hot tea and went to bed.  Although I did not get to work on the bus today I got a lot accomplished and we had a great time watching our younger grand-daughter experience Halloween.

 

2015/09/21 (M) Back to Bus Work

Leave a reply

We were up a little after 8 AM.  I showered while Linda prepared our breakfast fruit–blueberries, raspberries, and peaches–to go with our granola.  I made a pot of coffee, using up the Costa Rican half-caff, and then sat down to eat.  After breakfast we sat in the living room enjoying our coffee to the warmth and glow of the fireplace while Linda downloaded and installed iOS 9 on her iPad.  The download was 740 MB so I waited until the installation was done on her machine to start it on mine.

When we finally got to work our first task was to unload all of the wood from the car and store it in the garage.  My next task was to call Ferman Miller at Countertops Plus in Shipshewana, Indiana to make sure he got my message on Friday with the dimensions for the Corian top table.  I got his voice mail again and left another message.  I then called Josh at Coach Supply Direct to bring him up to date, got his voice mail, and left a message.

Linda planned to get a few things at Whole Foods Market as she needed to drive to Ann Arbor anyway to pick up our wallpaper from Delux Draperies and Wallcoverings.  While she took care of that I started figuring out what parts I needed to reconfigure the heating system.  Before making a run to the store I found all of my plumbing tools and supplies.  I got 20 feet of heater hose and 10 band clamps from O’Reilly’s and various copper fittings from Lowe’s.  I also got a drain hose and a clean bucket to catch/hold antifreeze.

Back home I removed the seat and back cushions from the sofa and stacked them on the chairs.  I removed the temporary plywood top from the desk and stored it in the garage.  I then uninstalled the desk pedestals from the wall and from their bases.  There wasn’t much else I could do without Linda’s help, so her return soon thereafter was timely.  We had a light lunch and then moved the pedestals to the sofa.  That left the bases free for me to work with.  I still did not have all of the parts I needed to install the fan-coil heat exchangers in the bases.  I also needed to remove the heater hoses in order to mount the heat exchangers and replace the hoses with different lengths and angled fittings.

As I was contemplating all of that I got a call from Chuck Spera.  He was in the process of setting up an appointment to have the lower windshields replaced on both of our rigs and wanted to make sure I was still interested and check my availability.  He called back a little while later to let me know we were set for next week Tuesday in the morning.

I then got a call from Joe Cannarozzi.  Joe has done a lot of work on our bus over the last five years, especially the chassis.  He called to confirm that I still wanted him to stop at our place on his way back to Chicago around Halloween and discuss what I needed done.  Yes, I did, and what I needed was routine maintenance; lube, oil, filter(s), brakes, and possibly axle hub seals.

When we first started working with Joe he had an active, full-time mobile bus repair business, specializing in Prevost chassis service.  The last couple of years he has worked a regular gig in upstate New York from April through October.  He still services a few buses, like ours, starting in the north in the late fall and working his way to Florida for the winter where he tries to get to the Keys and take 4 to 6 weeks off before working his way back up to New York in the spring.  When we wrapped up the call I texted Chuck to let him know that Joe would be coming this way.

I called Ferman again and this time he answered the phone.  He had gotten my two previous messages and I was correct that there was not enough material in the large sheet of Corian to make the table.  He had not had a chance to check his stock to see if he had any more of the Sandstone.  I mentioned that Josh had another vendor with a 30″ by 40″ piece.  Ferman indicated that if he doesn’t have another piece he would be willing to work with that piece if Josh got it.  I called Josh and he answered this time so I walked him through the current status.  He called the other vendor and called me back.  The piece is 30″ by 48″ and he was willing to sell it for $175.  Josh and I agreed to give Ferman a couple of days to check his stock before pursuing it.

Linda was working at her desk on a proposal for the bakery and preparing a bank deposit for our GLCC chapter.  I went to the garage and began soldering 3/4″ copper plumbing fittings.  I need to route the 3/4″ rubber heater hose around corners that were too sharp to just bend the hose so the copper fittings will take care of that.

Linda called me to dinner at 6 PM.  We had a nice salad, vegan Italian sausage with onions, and Brussels sprouts as a side.  A small glass of Moscato made a nice accompaniment.  After dinner I checked my e-mail and took care of the cats’ liter tray.  I then drove to Lowe’s for two more 45 degree street elbows.  On the drive home I talked to Mike (W8HX) on the South Lyon 2m repeater.  We discussed getting me back up our tower sometime in the next 9 days if my work on the bus progressed to the point where I could afford the time.  We went to bed early enough to watch a few TV programs and then fell asleep.

 

2015/09/05 (S) Building the Built-in

Leave a reply

We set the alarm for 7 AM as we had to return the 100 pound floor roller to The Home Depot by 8:08 AM.  We got the roller out of the bus, reattached the transport wheels, and loaded it into the back of my car.  We positioned it so that Linda could hold on to the handle while I drove.  One-hundred pounds that is designed to roll is not something you want loose in your car.  We got to the store at 7:40 AM but the associate was busy renting a ditch digging machine to someone.  We had to wait 15 minutes but that was OK.  After returning the roller we drove back to the house so Linda could get her car and our iPads and then drove separately to Panera in Brighton.

Linda had her usual Everything bagel and I had my usual Cinnamon Swirl & Raisin bagel, both sliced and toasted with nothing on them.  Two large coffees rounded out the order.  The coffee was hot and did not have grounds in it (for a change).  For some reason we got an extra Everything bagel that we did not order so which we split it.

Linda left at 9 AM to drive to Ann Arbor to pick up grand-daughter Madeline who will be with us until sometime on Monday.  Her mom and dad are attending a wedding on Sunday in Madison, Wisconsin so they are driving over today and driving back on Monday.  I stayed at Panera getting my money’s worth of coffee while finishing yesterday’s blog post and starting on today’s missive.

I left Panera at 9:45 and stopped for gasoline at the Shell station on the way home.  $2.29/gallon.  I would love to see $2/gallon gasoline again.  Better yet, I would love to see $2/gallon diesel fuel.  Linda planned to stop at the grocery store on the way back but I wanted to start a load of laundry and be home when Linda got back to the house with Madeline.

I got the laundry sorted and the first load started and then spent a little time at my desk.  I had to reset a password for someone on the SLAARC website and I logged in I was reminded that WordPress 4.3 was now available.  There were seven other updates available as well; three plug-ins and four themes.  I don’t use any of those themes and should probably delete them, but for now I just updated WP and then updated everything else.  I then logged in to our personal website, the FMCA-GLCC website, and the FMCA Freethinkers website and did the same updates.

While I was in our personal website I cleared out the 104 spam comments that had accumulated since my last house cleaning.  In the Freethinkers website I activated all of the plug-ins except Wordfence.  I have problems with this website and tech support at iPower says it is the Wordfence plug-in that is at fault.  They ask for permission to deactivate it and I give them permission but ask that they only disable that one plug-in.  Instead they disable ALL of them; every time.  I would really like to move this website to QTH.com and I may just do that as an add-on domain to our account.  Unfortunately our e-mail reflectors are set up on through the iPower account and I doubt that the club will want to pay for two different web hosting services.

It was a nicer day than we have had for most of the week, cooler with clearer skies and a nice breeze, so I opened up the windows in the motorcoach and turned on all three ceiling exhaust fans to air out the interior and get rid of the lingering smell from the floor tile adhesive.  (Yes, that is one, long sentence, but since I have added this one, it is now a proper paragraph rather than a single sentence paragraph.)

Linda and Madeline stopped at the Whole Foods Market in Ann Arbor, which is not far from our son and daughter-in-law’s house, and got to our house at 11 AM.  Madeline and I helped Grandma Linda unload the groceries and put them away.  I moved a few things from the front hallway into the library where Linda put most of the bus drawers last night (three of them are in our bedroom).  Madeline wanted her inflatable porta-bed set up so Linda took care of that.  Once her bedroom was arranged we got out her toy box and started playing with things.  She also had a couple of bags of things she brought with her and got a small soccer ball out of one of them.  We had a great time throwing and rolling it around the living room.  It is always wonderful to see the pure joy of a young child at play doing something as simple as this.

By 12:30 PM Madeline was ready for lunch so Linda made a PB&J sandwich and washed some green grapes.  She washed some black organic grapes for us and I had a few pretzels dipped I Sabra Roasted Red Pepper Hummus.  It’s my favorite hummus from them, or pretty much anyone else.

After Madeline laid down for her afternoon nap at 1 PM Linda and I both got busy with chores.  As much as I would like to have taken today off, at least from hands and knees work, we only had eight days left to get some significant tasks accomplished on the bus.  In terms of a critical path view of the overall project the critical task is grouting the floor tile that we finished installing at 9 PM last night.  Not only will it take some time to do but once it is done it cannot be walked on for 24 hours.  As much as it needed to be done, however, I needed a day of not being on my hands and knees.  If I get it done on Sunday I can resume work inside the coach on Monday.

While Linda made a batch of granola I worked on assembling some of the pieces for the built-in sofa.  My plan was to fully assemble the two plenum boxes that will support the ends of the plywood seat, and I intended to do that by gluing and screwing the four pieces together for each.  In order to do that I needed screws of the appropriate type (#6 SR) and length (1-1/4″) so I went to Lowe’s to get them.  While I was there I looked at continuous hinges and angle brackets but did not buy any.  I need a 72″ hinge but all they had were 48″, 30″, and 12″.  I may be able to use two 30″ and one 12″ but I need to check the actual dimension.  I also needed a #6 drill but with an integral countersink but Lowe’s did not seem to have what I needed so I went to The Home Depot and found something there.

I think this marking scribe belonged to my mother’s father.

I think this marking scribe belonged to my mother’s father and is at least 100 years old.

Back home I was getting all of my tools and supplies ready when I realized that I would not be able to attach the plenum/support boxes to the adjacent cabinets if they were fully assembled.  This was an example of incomplete design; either I have forgotten how I planned to anchor these boxes, changed my thinking about this in the time since I did the design work, or never figured out this detail in the first place.

Ideally I could anchor them in a way that does not destroy the cabinets or the floor.  One way to accomplish that would be to attach them to the HVAC plenum at the back and the vertical front support board using angle brackets, and to the top of the wiring chase above the HVAC plenum via the two filler strips on either side of the seat.  If I do that I can fully assemble the two plenum/support boxes before installing them.

For now I only assembled half-boxes with one side piece attached to the bottom piece and the other side piece attached to the top piece.  I built one of them for the left end and the other one for the right end. What this leaves open as an option is screwing the side/bottom assembly to its adjacent cabinet and then screwing the other assembly to the first one without using any glue.  The dry assembly would allow everything to be disassembled later if needed.

Madeline was up by this time and helped Grandma Linda put the new seed block in the bird feeder.  They then walked around to the front of the garage to see what Grandpa Bruce was doing.  I showed them my tools and the pieces of wood and explained how everything was going to work and fit together.

Two pieces of one of the plenum boxes held at right angles for gluing and screwing.

Two pieces of one of the plenum boxes held at right angles for gluing and screwing.

I aligned the pieces being joined, which are all 3/4″ cabinet grade 13 ply plywood, using two corner clamps.  I then scribed a line 3/8″ from the edge of the piece that was sitting on the edge of the other piece.  I marked screw locations every two inches with the spacing centered along the line.  I drilled pilot holes with countersinking to ensure the screw heads would be below the surface of the wood.  I disassembled the two pieces, leaving the piece that the screws would go in first in the clamps, and sanded off any rough edges.  I ran screws part way into each hole so the tips protruded just enough to put the two pieces back into alignment when they were rejoined.  I applied Titebond II wood glue to the edge piece spread it out, and wiped off my finger with a wet cloth.  I inserted the edge piece back into the clamps, used the screws to make sure it was aligned, tightened the clamps, and ran the screws most of the way down.  I then loosened the clamps holding the edge piece and drew it up tight by running the screws all the way down.  I used a wet towel to wipe off the excess glue that was squeezed from the joint and set it aside to dry.  I took a lot of pictures too.

The center portion of the storage space under the seat will have an elevated platform with closed ends to create a plenum for the OTR HVAC return air.  I assembled the two end pieces to the ends of the platform using the same method I used for the plenum/support boxes.  There is also a support piece for the middle of the platform but I cannot use the clamps to hold it in position relative to the platform so I will have to do something else.  I was thinking that I did not feel like tackling that task when Linda and Madeline came back to the garage to let me know it was almost time for dinner.  Saved by the food bell, I closed up the garage and went inside to eat.

Linda set out some carrot slivers, diced peaches, and home grown cherry tomatoes.  She cooked some mock chicken patties and heated up some vegan gravy to go with them as a main course.  For sides she heated black beans, edamame, and vegan Mac-n-cheese.  We all enjoyed our meal.

Madeline really enjoys the swings at the Brighton Mill Pond Imagination Station Playscape.

Madeline really enjoys the swings at the Brighton Mill Pond Imagination Station Playscape.

Our son let Linda know that Madeline had not been sleeping through the night recently and had developed a sensitivity to noises.  Linda figured Madeline might sleep better if she engaged in some vigorous play after dinner and suggested that we go to the Brighton Mill Pond Imagination Station Playscape.  Ms. M liked the idea but wanted to make sure I was coming too.  I found a reasonably good parking spot and pushed her over in the stroller because she does not like to walk for the sake of walking.  But once we got to the playscape she was in “go mode.”  As the sun set and the light faded we strollered her over to Jack’s for a scoop of vanilla ice cream with sprinklers.  We then strollered her back to the car and drove home.

Linda had promised Madeline that she could watch a video before she went to bed.  She had selected an episode of Daniel Tiger, an animated children’s program based on the Daniel Striped Tiger character from the old Mr. Rogers TV program.  We had Shawna’s iPad with access to her Netflix account but the program was downloading slower than molasses poured on a cold day.  We had problems with video, then audio, but eventually got it to work after I turned off the Wi-Fi transceiver on my smartphone.  Linda got Madeline ready for bed while fiddled with the technology.

After the video Grandma Linda carried Ms. M around to look at all her favorite artwork, a bedtime ritual that goes back to the first time she ever stayed at our house overnight.

 

2015/08/17 (M) Wallpaper Search

Leave a reply

 

 

We awoke this morning to find wild turkeys in the yard behind our bedroom.  The deer feed block and natural mineral rock initially attracted a doe and her faun but has been a much stronger attraction for the wild turkeys and crows.  Both the turkeys and crows also like to clean up the bird seed that falls to the ground under the seed block that Linda hung from a branch on one of our White Pine trees.  The turkeys eventually moved on and we sat down to a breakfast of fresh mixed berries, juice, and coffee, which we took to the living room while we used our iPads to read, write, or play a few games, as is our morning habit.

I had a text message exchange with Chuck regarding the moving of our old bus refrigerator out of his shop.  He and Barbara are headed off to Oscoda on Friday with their race car so I e-mailed Harvey (AC8NO) from our SLAARC ham radio club to see if he could help us move the refrigerator on Friday.

We had quite a few downed branches, and a couple of downed trees, scattered about the property as a result of winter snows, spring/summer storms, poor drainage, and age.  With Keith coming this morning to mow the grass I decided I should pick up as many of them as I could.  When I started at 9:30 AM it was already warm and muggy.  Keith showed up at 10 AM and got right to work but I managed to stay ahead of him and got everything of any size picked up except for one tree.  It was at least 8″ in diameter at the base and at least 30′ long so I will have to de-limb it, cut up the trunk with a chain saw, and haul the pieces away using the lawn tractor and utility dump trailer.  That, however, won’t happen anytime soon.

We skipped last week’s mowing because it had been dry and the grass had not grown noticeably, but we got rain during the past week and the grass responded accordingly.  The yard looked good when Keith was done and the timing of his visit was fortuitous as there is rain in the forecast for the next few days with slightly cooler temperatures.

We had a light lunch and then Linda settled in to work at her desk while I worked in the bus.  I spent a couple of hours using the belt sander to grind down the residual thinset and mastic on the floor.  I wear a dust mask, hearing protector, and safety glasses when sanding, which is even less comfortable than normal when the temperature and humidity are elevated.  But I needed to have the floor prep finished by the end of this week, and the new floor installed by the end of next week, or I risked not being ready for the installation of the new seating on September 14 and 15.

I suggested to Linda that we go to Ann Arbor to look at wallpaper, visit Brendan, Shawna, and Madeline and then pick up some things at the Whole Foods Market that we cannot get locally.  Linda researched wallpaper stores and made arrangements with our son while I took a shower and got dressed for visiting.

We left around 3:30 PM and drove down US-23 to the Washtenaw Road exit.  If we had put the address in the GPS sooner we would have taken M-14 west instead of staying on US-23 as the Delux Drapery and Shade Co. is on West Stadium Boulevard.  Still, we got there in a reasonable amount of time.  We told the sales associate that we were looking for something that would stand up to use in a motorhome, preferably something that could be wiped, washed, or scrubbed.  We wanted something light and neutral (off white) without a pattern that had to be matched, but with some texture.  She pulled out several sample books and we looked through them.  We ended up signing out three books each of which had one or two papers that we liked and thought might work well with our woodwork, floor tiles, and upholstery.

We drove back across town to our son and daughter-in-law’s house.  Our daughter’s car was also there but no one was around so Linda called Brendan.  As we suspected they were at Burns Park so we walked over there and found them.  Madeline was very excited to see her Grandma Linda and ran over to give her a hug.  As we were heading towards the park exit that most directly leads back to their house we spotted Madeline’s friend Maya and her dad Jason.  That unplanned encounter resulted in 20 minutes of child play and adult socializing before we finally resumed our homeward trek.

Back at the house we continued to visit until dinner time.  Meghan left to go fix dinner for herself and Chris.  Madeline had her dinner and then let her dad read a Curious George story.  Brendan and Shawna had packing to do for their flight tomorrow so we took our leave.  The three of them are flying to Denver to visit Shawna’s mom (Carol) and her husband (Cliff), who live nearby in Golden, Colorado.  Madeline is well-traveled for a 30 month old child.

We stopped at the Whole Foods Market on Washtenaw Avenue, which is close to their house and conveniently located on our route out of town.  The main item on our list was plain soy creamer.  We used to be able to get this at both the Meijer’s and Kroger stores near our house but they are only carrying the vanilla flavored version which I do not like.  We picked up a bag of sauerkraut to go with the vegan beer brats, six bottles of wine, because you get a 10% discount on six or more bottles (mix and match), two pieces of vegan cake, and some other stuff.  It’s probably a good thing that we do not have a Whole Foods closer to our house.

By the time we got home it was 7:45 PM.  Linda heated the sauerkraut and the vegan beer brats and served them open-faced on hot dog buns with mustard, of course.  Black grapes provided a sweet contrast to the savory main dish.  We sat for a while in the living room, playing iPad games and writing blog posts while we had some of the vegan cakes, before turning in.  I continued to write while we watched a TV program and then went to sleep.

 

2015/07/25 (S) Monitoring

Leave a reply

We started our day with our weekly ham radio breakfast in South Lyon.  As we were leaving breakfast I called Chuck to see if he was at his shop.  He wasn’t but said he could be there between 11 and 11:30 AM.  We drove home, loaded up my car with the accumulated recyclables, headed over to Recycle Livingston, and then headed to Chuck’s shop in Novi.  We arrived before he did and let ourselves in.  I got his Dremel tool kit and pistol style soldering gun and we chatted for a while.  He had a noon appointment with someone at a commercial building he owns in Livonia, and we had a long list of project tasks to take care of, so it was a shorter chat than usual.  We stopped at the Lowe’s in New Hudson and bought a can of garage door spray lube and then headed home, stopping for fuel at the Brighton Shell station on Grand River Avenue at I-96.

At our ham radio breakfast Linda had rye toast and I had an English muffin for breakfast (our usual meals) so we were hungry by the time we got home.  We had roll up sandwiches of hummus, Vidalia onions, and greens with a drizzle of olive in a whole wheat pita.  Very tasty.  We then got to work installing the wall-mounted track for the ZioTek monitor mounting system I bought from CyberGuys.

The north wall of the ham shack. Critical points for the mounting of the ZioTek track system are marked with green tape.

The north wall of the ham shack. Critical points for the mounting of the ZioTek track system are marked with green tape.

Conceptually the installation was simple but it took all afternoon.  There is a kind of alcove at the north end of my office that serves as our amateur radio (ham) shack.  The purpose of the ZioTek system is to support up to four monitors on the north wall above the two desks located there so that they are not attached to the desks or using up any of the desktop real estate.  The walls in the office are 7/16ths inch thick T-111 exterior plywood with 1/2″ grooves on 4″ centers running the length of the plywood sheets.  The sheets are installed vertically so the groves run vertically giving the appearance of vertically installed 4″ wide rough sawn boards.  We finished the photo studio/office at the old house with this material so we knew we liked the way it looks.  Being plywood it has once major advantage and one major disadvantage compared to drywall; you can screw relatively heavy things to it, but holes are essentially impossible to repair.  What that meant for us was that we only had one chance to get the track in the correct location.

In this case “correct” meant:  at the right height and horizontal location to be able to position the monitors exactly where we wanted them while making sure the track was level.  To accomplish this I bought a 1″x6″-8′ poplar board to use as a mounting plate for the two track sections.  (All of the trim in the ham shack/office is poplar.)  We used pieces of tape to mark the locations of the corners of the three monitors on the wall and marked the centers of the VESA 100×100 mounting plates.  When we knew where the horizontal centerline of the tracks needed to be we determined the horizontal location of the tracks relative to the right end of the poplar board, which would be installed flush to the vertical trim in the northeast corner of the alcove.

The ZioTek tracks will mount to the horizontal poplar board which will be mounted to the wall at the studs.

The ZioTek tracks will mount to the horizontal poplar board which will be mounted to the wall at the studs.

We set the poplar board in the utility hallway and positioned the two tracks on it.  I butted the tracks together and slid one of the mounting plates so it saddled both tracks and kept them aligned.  The tracks are 4.5″ wide and the board was 5.5″ wide so I very carefully positioned the tracks for a 1/2″ reveal along both edges.  I then marked the eight mounting holes (four in each track) and removed the tracks.  Using a brad point wood bit that was slightly smaller than the central shaft of a #14 wood screw I drilled holes that were as carefully centered as I could make them.

We held the board in position against the wall and used a 1.5″ #6 finishing nail through the right mounting hole to hold that end of the board.  We then used a 4-foot level on the top edge of the board and secured the left end with a second nail through one of the mounting holes.  We positioned the chair where it will be when in use and made sure we liked the height of the board.  It looked and felt right so we proceeded to secure it to the wall.

The ZioTek tracks mounted to the poplar board mounted to the wall. Linda is vacuuming up sawdust from drilling.

The ZioTek tracks mounted to the poplar board mounted to the wall. Linda is vacuuming up sawdust from drilling.

Using a small carpenter’s square I marked locations for mounting screws one inch in from each edge of the board in vertical alignment with the small heads of the nails that secure the T-111 to the studs.  The 8-foot long board spanned six studs so I had 12 holes to drill.  I used a standard drill bit that was slightly smaller than the shaft of a #14 wood screw and drilled through the poplar board, through the T-111, and into the studs.   I used a countersink bit to create recessed pockets for the flathead wood screws.  We then secured the board using 3″ long #14 flathead wood screws.  We applied a little soap to the screw threads to help them go in.

I pulled the two small nails out of the track mounting holes.  Using the same drill bit I finished drilling out the mounting holes all the way through the T-111.  We positioned and partially installed one track using 2″ long #14 flathead wood screws in the two end mounting holes.  We then did the same thing with the other track.  I slid one of the mounts so that half of it was in each track and partially installed the remaining four screws.  I gently snugged up all eight screws, checking the track alignment as I went, and then torqued them down.  The heads stick up above the inside surface of the track but the shuttle mounts are raised on the underside so they slide right over the screw heads without interference.

The first of three monitors to get mounted. This one is on the left end of the tracks.

The first of three monitors to get mounted. This one is on the left end of the tracks.

With the track mounted to the wall we turned our attention to installing the monitor mounting arms and monitors.  We used one of the long arms on the left, the short arm in the center, and the medium arm on the right.  The other long arm will eventually end up on the far right or get swapped for the medium arm, but for now I only wanted to mount three monitors.  We installed the nice Dell monitor that goes with my older Dell Precision laptop in the center and installed the two ASUS monitors to either side of it.

By the time we got the third monitor mounted the office was in more disarray than usual and we did not have time to clean up tools and put things back in order.  Linda did manage, however, to run the vacuum cleaner and get most of the sawdust and wood chips sucked up.  Our son had called during the afternoon with a last minute request for babysitting services from Linda and I decided to go too.

A view of the mounts for the left and center monitors. This is a substantial system.

A view of the mounts for the left and center monitors. This is a substantial system.

We left at 6 PM for Ann Arbor and stopped at the Whole Foods Market to pick up a few things for dinner.  We got two different vegan sushi rolls, a cold couscous salad, and some organic black grapes.  When we arrived at Brendan and Shawna’s house a little before 7 PM Madeline was surprised and excited to see us.  Brendan and Shawna left around 7:15 PM for an engagement party and Madeline was fine with the whole thing.  She was still eating her blueberries and strawberries and then wanted Linda to read several books to her.  We went upstairs to see how her crib had been converted to a toddler bed, allowing her to get up during the night to use the bathroom.  Such a big girl.  But not too big for pajamas that featured fairies.

After another couple of stories Madeline went to bed without a fuss.  We then had dinner.  The California rolls were OK but the couscous salad was outstanding and the grapes were very good.  We sat on the couch using our iPads but I could not stay awake so I laid down and drifted off to sleep.  I was awakened about 90 minutes later by the return of Madeline’s parents.  Linda gathered up our leftover food and the roses the kids had gotten her as a “thank you” for babysitting on such short notice which gave me time to fully wake up.  We were on our way by 10:30 PM and back home shortly after 11.

 

2015/06/16 (T) More Stupid

Leave a reply

Linda was scheduled to go to the bakery this morning but rescheduled to tomorrow due to last night’s weather forecast and the possibility of flooded highways in Detroit.  The morning rush hour traffic is bad under the best of conditions and flooded roadways can make it near impossible.  She also did not sleep well and woke up tired.

The Apex roofing crew started showing up just before 8 AM and the Wimsatt truck showed up with the shingles a little after 8 AM.  They brought a conveyor truck this time and were able to get the shingles off the truck and onto the roof without difficulty.  The Apex crew did not waste any time getting to work.  It turned out to be a great day for roofing; clear skies, no rain, moderate temperatures, lower humidity, and some breeze.  Even so, it is work that is done without the benefit of shade and roofs are hot places to work even on the nicest of days.

Wimsatt unloads shingles onto the garage roof.

Wimsatt unloads shingles onto the garage roof.

Linda continued working on the financials for our amateur radio club while I checked my e-mail.  I had a reply from RV Critter Guard telling me what to order and how much it would cost.  I placed the order through their website and used PayPal to complete the transaction.  I tried calling the concrete contractor that Phil recommended (Bid Rite Concrete LLC in Whitmore Lake) but the phone would disconnect after the first ring and revert to a dial tone.  Perhaps the recent storms caused a problem but I e-mailed Phil to see if he had a different number for them.  I called the Henry Ford Medical Center in West Bloomfield and made dermatology appointments for myself and Linda.

With all of that taken care of I turned my attention to the bus.  The toilet is a Microphor LF-210.  It uses pressurized air to operate the waste valve and the water valve and to help push the waste through the drain pipe and into the black tank.  To remove the toilet I had to undo three connections—air, water, and waste—and take out the four screws securing it to the floor.  If only it was as easy as that makes it sound.

The plumbing at the back of the Microphor toilet in our bus.

The plumbing at the back of the Microphor toilet in our bus.

Undoing the air line was easy and undoing the water connection only a little less so.  The waste connection was another matter.  The 1.5″ black plastic drain pipe was routed from the water bay through the floor and into the HVAC chase that runs along the driver’s side of the coach.  The converter, Royale Coach, brought it out through a hole in the wood that covers the chase, making it impossible to take the wood cover off.  The pipe then made two right angle bends, the first one towards the floor and the second one towards the back of the toilet.  The waste pipe was connected to the toilet discharge pipe with a length of rubber hose and a compression sleeve.

The toilet has a large hole in the back for all of these lines to pass through to the inside where they get hooked up.  It should have been a simple matter to slide the toilet away from the wall/chase but the last bend in the drain line was below the top edge of the bottom of the hole, preventing it from coming out.  After wiggling the toilet enough to get the rubber hose loose from the drain pipe I was able to lift the drain pipe just enough to slide the toilet out.  I took pictures for a possible BCM article on our interior remodeling project and then Linda helped me move the toilet out of the bathroom to the front of the coach.

The more I disassemble this coach the more stupid I think the design and construction of its systems are.  I don’t know that coaches from Marathon, Liberty, Vantare, Featherlight, Parliament, Millennium, Custom Coach, or any of a dozen other companies that have come and gone, is any better as I have never tried to disassemble one of them.  These are one-of-kind vehicles that are custom built specifically for the original purchaser and the over-riding factor in every case is the interior design.  Stuff, like toilets, go where the customer wants it, and systems, which are generally buried and hidden from view, get built wherever and however they can be made to fit.  The converter does not expect to have to repair or replace anything during the very short 12 month, 12,000 miles, warranty period and if stuff breaks after that, or someone wants to do a remodel or upgrade sometime later, it will all be time and material.  How difficult it is to do, and how many hours it takes, is someone else’s problem at that point.

The Apex crew hard at work on the back side of the main roof.

The Apex crew hard at work on the back side of the main roof.

We had a call from Butch updating us on a possible property purchase.  They are waiting for a clear title search before making an offer.  The property includes a house and a sizable barn.  The barn needs a new roof and the house will have to be gutted and the inside rebuilt, but for the right price it will still be a good deal.  They already have a good estimate to replace the barn roof and since they are now retired they have more time to work on the house than they would have a year ago.  They also have family and friends who can help.  Besides, they still have their home/business building in Twelve Mile, Indiana and their bus, which they lived in all this past winter, so they will not be under any pressure to get the inside rebuilt quickly.

Linda started downloading updates from Adobe Creative Cloud, which take a very long time, and then left at 3:30 PM for Ann Arbor.  She agreed to take care of grand-daughter Madeline while Brendan and Shawna attended a reception at the University of Michigan – Ann Arbor for newly tenured and promoted faculty.  I was on my own for dinner and Linda bought an Amy’s pizza so I would have something easy to prepare.

The roofers finished up for the day around 5 PM.  By the time they left most of the trash was in their dumpster trailer and the roof was tarped as a precaution against rain even though the forecast for tonight and tomorrow is for dry weather.  Rain returns to the forecast tomorrow night into Thursday but turns dry again on Friday, so we are optimistic that they will get the job finished this week.  It’s a big job but Apex has a big crew working on it and they got a lot of work done today.  We are very pleased with the look of the Certainteed Landmark Pro Max Def Resawn Shake shingle that we chose.  I took pictures of the work throughout the day as I always try to do with major projects.

After the roofers left I worked for a while in the bus.  I took the mattress into the house along with the electric heating pad controls.  I disconnected the two gas struts that support the plywood bed platform so I could open it far enough to reinstall one of the drawers.  I left them disconnected as I plan to remove the platform to provide better access to the sides of the box and floor.  I also plan to reposition them when I reinstall the platform to provide better access to the storage area underneath.  I then took measurements and made a sketch of the file drawer box for the desk.

Installing soffit baffles and replacing roof decking on the front of the main roof.

Installing soffit baffles and replacing roof decking on the front of the main roof.

I cooked the Amy’s Roasted Vegetable Pizza on the outdoor gas grill, both to avoid heating up the house and to see how it responded to that cooking method.  I used the grilling mat and the result was quite acceptable.  A glass of Franzia Moscato was a nice accompaniment.

After dinner I worked at the drafting board in my office turning my sketch and measurements into a scale drawing.  The two boxes for the desk will be trickier than a standard desk box because of the HVAC chase and because I have to put an Aqua-Hot heat exchanger in the bottom of each one.  I worked until about 9 PM and then came back upstairs.

The air-conditioner worked fine yesterday but was once again unable to bring the temperature in the house below 74 degrees F even though the outside air temperature never rose above 80.  There is clearly something wrong and I am wondering if one of the cold air ducts is open into the attic and/or one of the return air ducts us drawing hot air from the attic.  Either of these conditions would reduce the air flow to the house and overtax the evaporator in the air handling unit.  The more likely cause, however, is lack of refrigerant.  Whatever the case I shut the system off and opened up the house.

I was relaxing in the living room when Linda called at 9:30 PM to let me know she had left her babysitting gig and was stopping at the Whole Foods Market before heading home.  The reception started at 5 PM and lasted until 9 PM.  She was home by 10:15 PM and straight away to bed as she has to go into the bakery tomorrow and wants to leave early enough to be ahead of the morning rush hour traffic.

 

2015/05/17 (N) A Tale of Two Sittings.

Leave a reply

Our day had two parts.  Part 1 was at home and Part 2 was in Ann Arbor.  The first part started with our normal morning routine:  coffee, breakfast, and iPads.  I put a load of laundry in the washing machine and then checked/replied to e-mails, which I had not done for a couple of days.  We then got busy on tasks and chores.

Linda’s focus for the first part of the day was cleaning and straightening up the house in advance of Jack coming on Wednesday to clean all of the carpets.  Jack Hoskins runs Duraclean as a one-man business and has done our carpets and upholstery for a while.  My focus was the bus and my first task was to carry all of the “stuff” that came out from under the bed into the house.  All of that stuff then went various places downstairs, but not on the carpets.  By the time we finished the morning chores it was almost 1 PM so we had a few pretzels with hummus for lunch.

I only worked in the bus for a few of hours but I got some things done.  First I broke all of the carpet tack strips into pieces small enough to fit in a trash can.  Linda then helped me get the Shop-Vac into the bus and I vacuumed up most of the loose debris.  I had not yet removed the carpet from the right wall of the entry stairs so I did that next.  To remove it I had to take a light fixture loose and remove a piece of upholstered trim from around the bottom door hinge.  The two door hinges have thick rubber covers and after I removed the carpet I pulled back the rubber cover of the lower hinge and measured the width of the opening from the left edge of the door frame to the hinge.  It looks like we have 27″ to work with if needed.  I put the trim back on and re-installed the light fixture.  I then spent the rest of my time pulling carpet pad staples and carpet strip nails out of the plywood subfloor.  Removing the staples was tedious but it was part of what had to be done.

I quit working around 3:30 PM and took a shower and then relaxed for a bit while Linda was busy in the kitchen making a mushroom and power greens risotto.  She often uses barley in her risottos but this time she used Arborio rice which is the type normally used to make risotto.  I really like her barley risotto, but the rice version was outstanding.  After our early dinner I set an alarm on my iPad and we both took short naps.  We up at 5:30 PM and I gathered up my laptop computer, digital camera, and iPad while Linda closed up the house and got her iPad.  At 5:45 PM we were off to Ann Arbor to entertain (and supervise) grand-daughter Madeline while her parents went to a friend’s house for dinner.  We stopped at Whole Foods for some Almond Dream non-dairy ice cream.

Madeline was very excited to see us and showed us her house and back yard.  We went for a short stroll with her in her tricycle and then again in her car.  She had a Little Tykes kitchen playset on the back porch, just outside the real house kitchen, and she made “coffee and tea” for us to enjoy on the veranda.  Brendan has been working on the back yard and slowly but surely getting it into shape.  Yards are a lot of work.

Madeline was a little teary when Brendan and Shawna left but she settled down quickly as Linda got her engaged with some of her puzzles.  I sat on the floor with her and helped build the giant animal puzzles.  (The puzzles are large and have large pieces, they are not puzzles of giant animals, although giraffes are rather large.)  We learned that lions are nice but we do not pet “dinos” (alligators).

Linda prepared a bedtime snack for Madeline of grapes, strawberries, pineapple, and crackers and we had a few grapes too.  By 8 PM Madeline was tired and Linda got her ready for bed, which is a whole routine unto itself.  While they did that I got out my computer and set it up.  I checked my e-mail and then copied the photos I had taken since May 1st from my camera to my laptop.  I had photos of the work on the bus from four separate days so I selected a few photos from each day and post-processed them.  I then copied my draft blog posts for May 10 through 17 from my e-mail to separate Word documents and edited all of them.

I was spell checking my blog post drafts when Brendan and Shawna got home around 10:20 PM.  I shut down my computer and we visited while I packed up.  By 10:45 PM we were ready to be on our way.  We drove down in Linda’s car so she drove us home.  It rained several times between 8:30 and 10 PM but riding home we had clear skies in some directions (we could see stars) and lightning in other directions.  The roads were mostly wet and we drove in and out of a few showers.  We were hoping the rain would hold off as we have had a wet week and Keith is supposed to cut our grass tomorrow.

 

2015/05/10 (N) Mother’s Day

Leave a reply
The dinette in our Prevost H3-40 before removal.

The dinette in our Prevost H3-40 before removal.

Our son invited us to their house in Ann Arbor for Mother’s Day brunch.  We arrived at 10 AM and Madeline was very excited to see us.  Besides Shawna and Madeline, Meghan, Chris, and Katie arrived shortly after us.  After some coffee and initial visiting we started the meal with grapefruit juice and champagne cocktails.  Meghan made three kinds of vegan scones and Brendan and Shawna made granola and fruit salad.  It all made for a very tasty brunch.  Katie had to leave for work but was able to stay long enough to enjoy brunch.  Brendan and I stayed at the house to chat while everyone else went for a walk.  By the time they got back Madeline was ready for her 1 PM nap, right on schedule.

HVAC grills removed from front of J-lounge (L) and dinette (R) in our bus.

HVAC grills removed from front of J-lounge (L) and dinette (R) in our bus.

After Meghan and Chris left Shawna needed to run to a local market to pick up a few things for dinner with friends who were coming over later.  They are going to need another vehicle and we potentially have one to spare.  They have kept Linda’s Honda Civic at their house the last two winters while we traveled, so they are very familiar with that car.  Shawna had never driven a Honda Element, or even ridden in one, so she drove our car and Linda went with her.  When they got back from the market we visited a while longer.

OTR HVAC duct and Aqua-Hot fan-coil unit. These were under the dinette in our bus.

OTR HVAC duct and Aqua-Hot fan-coil unit. These were under the dinette in our bus.

We left at 3 PM and stopped at Whole Foods Market for a few items.  We had seen the 2009 Egri Merlot at Whole Foods in the past but the vintage they are now receiving is 2013.  There is no guarantee it will taste anything like the 2009, but it was already on sale and we got an additional 10% discount on six or more bottles so that is how many we bought.  We have lots of other wines in the wine fridge so these bottles may get to age a little before we drink them.

Forward end of passenger side sofa with end panel, footrest, table, and drawer removed. The footrest, table, and drawer were all motorized.

Forward end of passenger side sofa with end panel, footrest, table, and drawer removed. The footrest, table, and drawer were all motorized.

Back at the house we had a light supper and slices of the 6-inch multi-layer cookies and cream vegan cake we got at Whole Foods as the final Mother’s Day treat.  I had a long, late evening phone chat with Butch about dual-orbital polishers and bus barns before turning in for the night.

 

2014/08/26 (T) Dinner With Kate

2 Replies

Darryll planned to be back on Wednesday morning.  He figures two more days to finish everything except the hookups to the gas meter.  I figured I needed to have at least one coat of paint on the east garage wall today to stay ahead of him, so my first task after breakfast was to paint the wall.

Madeline being read to by Aunt Meghan with Grandma Linda.

Madeline being read to by Aunt Meghan with Grandma Linda.

 

Madeline goes for a ride on her new Radio Flyer tricycle.

Madeline goes for a ride on her new Radio Flyer tricycle.

When I was done with the morning painting I did a light sanding of the drywall compound on the outside of the utility closet walls.  After a cursory inspection, I decided it was good enough and went ahead and painted it and then cleaned up the paint tools.  I took care of a couple of minor electrical tasks and then sanded the library side of the former window A-C opening and applied some more drywall compound.  I cleaned up my drywall tools and by 11:30 AM was done with construction projects for the day.

I got cleaned up just in time for lunch.  We had left over Koshary, after which we sat outside and read.  Linda is reading an e-book titled “Consider the Fork: A History of How We Cook and Eat.”  The book is about the intertwined evolution of cooking technique, cookware, and utensils.  I started reading the September-October 2014 issue of The Gypsy Journal, which I had downloaded on Sunday and e-mailed to our iPads yesterday.

 

MEF3 steers the Radio Flyer with a little help from her dad.

MEF3 steers the Radio Flyer with a little help from her dad.

We left around 2 PM for our son’s house in Ann Arbor, making a stop at the Whole Foods Market for some dry ingredients.  The reason for our visit was to deliver Madeline’s new Radio Flyer convertible tricycle and visit until time to meet Kate for dinner.  Madeline started day care yesterday, which is a really big deal.  We were curious how the first two days went, and just wanted to see everyone; I think it’s only been a couple of weeks, but it feels much longer.  Today was my lucky day as Madeline decided I was the designated book reader.  She has let me read to her occasionally in the past, but usually goes to her mom, dad, aunt, or Grandma Linda, all of whom she has spent more time with than she has with me.  It made for a very special afternoon for Grandpa Bruce.

 

 

The Radio Flyer tricycle even has a sunshade!

The Radio Flyer tricycle even has a sunshade!

We left Brenda and Shawna’s house around 5:45 PM and found ourselves in the middle of the evening traffic jam on eastbound Washtenaw Avenue.  We slowly worked our way east towards US-23 and then turned into a strip mall to pick up some disposable paint tray liners at an ACE Hardware store.  We got back into the traffic flow using a street at the end of the strip mall that had a traffic signal.  Once we were back on Washtenaw Avenue we had more reasonable traffic flow the rest of the way in to Ypsilanti.

After weighing several options, Kate chose the Wurst Bar in Ypsilanti for dinner.  Linda had been their once before with Kate but it was my first visit.  It was well rated on Yelp and the menu had several vegan options.  They also had one of my favorite beers, the Lindeman Framboise, a raspberry lambic ale brewed in Vlezenbeek, Belgium.  They were out of the Lindeman but had another lambic from a different producer.  It came in something that looked like a large sparkling wine bottle and cost $15, so Linda and I split it.  Long before hops were used in beers they were seasoned with fruits and vegetables.  I’m not a big fan of hops, but I like fruit.  The substitute was OK, but not what I recalled from the last time I had this at a restaurant in Frankenmuth, Michigan.

 

Grandma Linda's turn to "drive" the Radio Flyer.

Grandma Linda’s turn to “drive” the Radio Flyer.

 

Kate had recently been to Paris, France and to both Venice and Padua in Italy with one of her nieces and nephews.  She had printed about 40 photos (8×10) for us to see.  While these are inherently beautiful places her photography was, as usual, superb.  The Wurst Bar serves “tots” instead of French fries.  Linda and I had some as an appetizer with vegan sausage crumbles, vegan cheese, and sliced jalapeños. Not health food, to be sure, but at least no animal products.  For dinner Linda had the vegan wurst and I had the Asian tofu burger.  Kate had a regular wurst and a dark beer on tap that she had not had before.  She really liked it, but I did not catch the name.

 

 

 

It's finally Grandpa Bruce's turn to drive the tricycle.

It’s finally Grandpa Bruce’s turn to drive the tricycle.

 

 

By the time we were done eating the lights had been turned down and the music volume had been turned up, so we moved to Sweetwater Coffee and Tea a couple doors down the street.  We all had coffee and to our delight they had a piece of vegan apple pie, which Linda took, and a piece of vegan mixed berry pie, which I took.  I really like fruit pies but they have always been a rare treat; all the more so now that we eschew animal products.  So tonight I had fruit beer and fruit pie.

 

 

 

I had planned to put a second coat of paint on the garage walls when we got home but the lateness of the hour disabused me of that idea and I went to bed instead.

Madeline shows her new tricycle to he mommy. It's not a Subaru, but it's pretty cool.

Madeline shows her new tricycle to he mommy. It’s not a Subaru, but it’s pretty cool.

 

2014/08/18 (M) Tasks Menagerie

Leave a reply

I woke up early, before 5 AM, so I got up, showered, shaved (not a daily occurrence), got dressed, and sat in the living room to read.  I started making coffee around 7 AM, which provided Linda the clue (incentive?) to get up and get dressed.  Ahhh, breakfast (homemade granola).

No more limbs hanging over the bus.

No more limbs hanging over the bus.

Linda was on tap to babysit in Ann Arbor today and left around 8:15 AM.  I got the Little Giant ladder out of the front bay of the bus and set it up as 14′ extension ladder.  This is the only ladder we own that will get me onto the roof of the bus.  I took a brush to clean off the roof of bus and a pole saw/pruner to trim tree branches encroaching on the bus.  When I was done on the roof I collapsed the ladder and put it back in the front bay as this ladder goes wherever the bus goes.  I trimmed lots of other trees from the ground and then gathered up the limbs into a pile to get them out of Keith’s way so he could cut the grass.  (Monday is grass cutting day this year.)

I wanted to run the Aqua-Hot but discovered we had left the electric heating element on so the coolant was hot enough the diesel burner would not come on.  We have been told by Aqua-Hot service technicians in seminars that the unit should be run at least once a month to keep it in peak operating condition.  I turned the electric heating element off and checked to see what else might be on that wasn’t needed.

I looked at replacing the overflow reservoir with the larger Oasis one I got from Butch, but it would require stand-offs or brackets to clear existing water lines (at least until I rebuild the water bay) and I did not feel like getting involved in that today.  Besides, the overflow reservoir was just below the full/hot mark from having left the electric heating element turned on, so I needed to let the system cool down before I could do anything anyway.

No limbs hanging out into the pull-through driveway.

No limbs hanging out into the pull-through driveway.

I chatted with Keith for a little while after he finished cutting the grass and then had lunch, after which I settled in to work at my desk on the SLAARC WordPress website.  I took a break mid-afternoon and made several phone calls.  My first call was to Heights Tower Systems in Pensacola, Florida to start finding out what I need to get our used Heights tower erected, how to order it, and what it’s going to cost.  My chat with Katie made it sound like they might not be all that helpful.  They need measurements, photos, and the name of the previous (original) owner as a starting point and I said I would send her that information as soon as I could.

I called Paul’s Tree service next to see if Paul Keech might come out and trim our trees.  The gal who answered the phone said Paul was trying to get out of the tree-trimming business but wanted to know if we needed trees trimmed or felled?  We need both, but I was primarily looking for trimming.  I guess that was the wrong answer.  I left my name and phone numbers and asked that he at least give me a call.  I suspect we will have to find someone else to trim several trees in places I cannot reach.

My last call was to EZ-Connector in Tulare, California.  I talked to Joe and was ready to order until he suggested I double check a couple of things first, specifically the number of circuits (wires) I need and the length of connecting cable.  I need to get these parts ordered, but I’m not sure when I will find time to verify these things.

Linda stopped at the Whole Foods Market in Ann Arbor but still got home ahead of the afternoon traffic.  She bought an Amy’s roasted vegetable pizza for dinner which we enjoyed with red grapes and sweet Bing cherries.  I worked some more on the SLAARC website creating pages for business meeting documents and uploading them.  I also uploaded my blog posts for the last five days of July to our personal blog.  I added more projects to my bus project list, got discouraged at its growing length, and went to bed.

 

2014/07/19 (S) A Busy Day

Leave a reply

At 7:30 AM we were about to leave for our usual Ham radio club breakfast in South Lyon when we realized some of the landscaping crew was already in the back yard.  I talked briefly with Steve to see if he had any questions for us and to let him know we would be gone for the morning.  We arrived at the Senate Coney Island a little later than usual to find a big group, some of whom were not regular attendees.  We would normally have lingered and enjoyed conversation over coffee, but we needed to get to Ann Arbor for a quick visit and to pick up my socket wrench toolbox from our son.

When we arrived at Brendan and Shawna’s house Madeline was outside pushing her push toy around the front yard.  As soon as she saw us she took off down the sidewalk towards the park.  Shawna retrieved her and got her stroller ready while Brendan and I transferred things out of and in to my car.  We then walked to Burn’s Park where Madeline played for about 45 minutes before we headed back to their house.  We had hugs all around and left.  We stopped at the Whole Foods Market in our way back to US-23 and then headed for home.

Back at the house, four landscapers were working, including Steve, and lots was getting done.  Hurray!  I got busy working on the electrical sub-panel in the garage while Linda made a run to the recycling center.  When she got back she did a load of laundry, which is normally my job, while she cleaned the lower level of the house.

I had to make a trip to Lowe’s for electrical parts and Linda had to make one in the evening to buy some 15 Amp single-pole circuit breakers, but I managed to get the old sub-panel removed, the wires labeled, the new panel hung, and all but one wire reconnected.  That wire needs to be replaced and I will do that first thing in the morning.  We turned the breaker on in the basement that feeds power to the sub-panel in the garage, turned on the main breaker in the sub-panel, and then turned each branch circuit breaker and checked to see that it was working correctly.

The reason Linda had to go get 15 Amp circuit breakers is that I discovered the old sub-panel had 14 gauge (AWG) wires “protected” by 20 Amp circuit breakers.  14 AWG wires are only rated to carry 15 Amps.  If allowed to carry more than that for any length of time they will overheat which could melt the wire insulation and lead to a short or worse, arcing, which can start a fire.  I will be placing those circuits on 15 Amp breakers in the morning.

 

2014/07/05 (S) Re-Search

Leave a reply

Contractors who do outside work, such as excavators, builders, and landscapers are at the mercy of the weather, so they work when they can, and when they can work, they often put in long hours.  For those of us who made our living doing “white collar” work for companies with paid holidays, the 4th of July often meant a 3- or 4-day weekend.  For other kinds of workers, the 4th of July is a day off; one day, and for yet others (think retail) it is just another workday.  It doesn’t matter that it fell on a Friday this year.  The landscapers couldn’t work on Thursday because of the overnight rain.  No work means no pay.  Saturday July 5th, however, was forecast to be great weather for working outside, and with sunny skies and no rain since Thursday, our job site had dried out sufficiently to allow people and machines to work.  Alas, the holiday spirit was with them and they did not show up first thing this morning like I thought they might.

Since grand-daughter Madeline spent her second night in a row with us last night she was still here this morning.  Consequently we did not go to our ham radio club breakfast in South Lyon like we usually do on Saturday morning.  Madeline woke up hungry and Grandma Linda had her bottle warmed up and ready to go.  She had also prepped all of the ingredients for her yummy vegan blueberry pancakes.  Madeline had a little banana and some fresh blueberries while grandma cooked the pancakes and I made the coffee.  We all enjoyed our breakfast.

Madeline Eloise sitting on our fake rock in our front yard (it's the cover for our well).

Madeline Eloise sitting on our fake rock in our front yard (it’s the cover for our well).

After breakfast we played and read and went outside to walk around in the driveway.  Our son called and we figured out who was going to travel where and when to get Madeline back home.  He was working on a project to rebuild their front porch/steps and was involved in painting wood pieces prior to assembling them, so we agreed to drive Madeline to their house in Ann Arbor in time for a light lunch before her usual nap time.  That also allowed us to stop at the Whole Foods market near their house on our way out of town.  A Whole Foods market is the only thing we do not have in the Brighton/Howell/Hartland area that we truly miss.  We would shop there several times a week if we had one nearby.

I managed to sneak away to the basement occasionally to do a load of laundry and install 126 updates on our Linux computer.  The updates involved file downloads totaling just over of 310+ MB so I started the process and let it run.  We get an effective download speed from our AT&T High Speed Internet (HSI) DSL connection of just over 1 Mb/sec or 64 Mb/min.  That is roughly 8 MB/min.  At that speed, 320 MB takes about 40 minutes to transfer, assuming AT&T doesn’t detect the amount of data being transferred and “throttle” (slow down) the speed.  Cell phone companies are known to do this but it is less clear whether AT&T does that sort of thing with their landline services.

We got back to the house at 2:15 PM.  Linda developed a headache while we were out, so she took some meds, put the groceries away, and laid down to rest.  There was no sign of the landscapers and no phone call, so there was no chance at that point that they would show up today.  That was OK with us; it is a holiday weekend and it was their idea to come work today, not ours; I just said it was OK if that’s what they wanted to do.  Apparently they didn’t.  The one thing I was looking forward to was having Steve show me how to operate the Kobelco sk35sr-3 excavator and then practicing operating it by removing concrete blocks, bricks, downed trees, and other detritus from the woods by the road southwest of our house.  Just behind these woods is where they are piling all of the construction debris anyway, so I would be able to position the excavator to allow me to grab most of the trash out of the woods and then swing it over and deposit it on the pile.  Maybe Monday?

Yesterday I posted a question to the WordPress.org support forum for the Jetpack plug-in and I got a reply a couple of hours later that directly answered my question.  I wanted to install/activate the Jetpack on more than one self-hosted website and needed to know if I could use a single WordPress.com account or if I needed a separate account for each site?  I was glad to find out that I only needed the one account that I already have.  The Jetpack plug-in is massive overkill for what I need to accomplish immediately, but some of the reviews suggested that it is so comprehensive it may be the last plug-in I ever have to install.  That is unlikely for a number of reasons, and a bit contrary to the open source nature of WordPress and the international community of developers that support it, but the plug-in does have 33 different “components.”  For most of those features there are other plug-ins available–in some cases lots of them—but this provides everything in a neat package with its own special place on the admin panel menu.

Linda was feeling better after a long, much-needed nap but did not feel like cooking.  She picked up ingredients at Whole Foods today to make mock beef stroganoff but decided to make it tomorrow.  Our go-to for no-prep meals are the various frozen products from Amy’s.  We try to always have a few in the freezer for occasions when Linda does not have the time or interest to prepare a meal from scratch.  Tonight we had the lasagna.  Linda wanted some fresh greens with dinner but did not feel like making a salad so she used a bed of mixed greens as a base for the lasagna.  If that sounds a bit strange, all I can say is that it was very nice for both taste and texture.

I spent more time this evening investigating the WordPress Jetpack plug-in, the result of which was that I deferred installing and activating it.  The attraction of this plug-in is that the Carousel feature works with the existing WP Gallery shortcode(s).  That means it works retroactively with every page and post containing a WP Gallery and that I would continue to create galleries they way I always have using the native WP Gallery functionality.  That sounds like exactly what I need, except that on further investigation I started seeing comments about banner ads, and a feature that allows website/blog visitors to comment on individual images with no easy way to disable it.  The workaround involves custom CSS code.  Ugh.

I kept looking and found a plug-in where the “author” had simply “forked” (extracted) the code for the Carousel function from the Jetpack plug-in and offered it as a separate plug-in.  Ignoring whether that was even ethical, some of the reviews suggested that it did not work correctly and that support issues were not being resolved.  I need something more reliable and better supported so I kept looking and found a very extensive plug-in that was free and had been downloaded over 1,000,000 times!  Now that has to be a great plug-in, right?  Maybe; maybe not.  The reviews were very mixed and many seemed to complain about the constant “tinkering” the author does with the plug-in, issuing updates every 3 – 4 days.

If I was willing to spend money for a plug-in my options would be greatly expanded, but I have looked at those as well and they all have mixed reviews.  The leading contender is the NextGEN Gallery plug-in, but the biggest downside with all of these gallery plug-ins is that they do not work with the native WP Gallery shortcodes which, in turn, would require me to rebuild existing galleries from within the plug-in. The ones that I find the most annoying are the ones with a free version that turns out to just be a teaser; the features I need are always in the “pro” or “premium” version.  An episode of Doc Martin gave me a needed and entertaining break from my research, which is appropriate in this situation as I have searched for a good image display plug-in before and now I am searching for one again.