Tag Archives: Teeko’s Coffees & Teas (Howell MI)

2016/04/21-25 (R–M) Bad Brakes & More

Leave a reply

2016/04/21 (R) More Bad Brakes

[NOTE:  There are no photos for these posts.]

We were up before 8 AM, had coffee in the living room by the warmth and glow of the fireplace, and had fruit for breakfast around 8:45 AM.  We left at 9:40 to take my car to Brighton Honda for its 110,000 mile service appointment at 10 AM.  Linda followed me in the Civic to drive me back to the house but as long as we were that close to Brighton we decided to go to the Verizon corporate store.  To our surprise, the store was permanently closed.  We were pretty sure there was still an “authorized retailer” a little farther down on Grand River Avenue (which never made any sense to me) but after the authorized retailer in Arcadia, Florida was unaware of the Mi-Fi device I was interested in (AC791L) I really wanted to talk to someone in a corporate store.

We did not investigate further as to whether the store had been moved and, not having any other business in Brighton, we headed home.  On the way I got a phone call from our State Farm insurance agent’s office about a long-term care premium that was due last month.  Apparently one of our children did not recognize it was a bill when they checked our mail and did not alert us to its presence.  It wasn’t a big deal, and Linda took care of it when we got home.

I started a load of laundry and settled in to work at my desk.  I did not have a reply yet to my support ticket for our WiFiRanger.  I checked-in to RVillage and saw that our member status had been upgraded to GOLD.  I did a search for used tractors and was researching a portable water deionizing system at AutoGeek.com when I got a call from Curtis Coleman of RVillage.  While Curtis and I were talking I got a call from Gary at Brighton Honda.  He left a message and I called him back.  The rear brake rotors and pads on my Element needed to be replaced.  It seems we have not been able catch a brake break in the last six weeks.

Linda made a haircut appointment with Renee for tomorrow at 10 AM but got a call back from Renee that she was not working tomorrow.  Renee had an opening at 1:15 PM today so Linda took that instead.  It was already noon so Linda heated a can of Amy’s Chili and we split that for lunch along with some fresh black grapes.  We left at 12:40 PM for the drive to Twelve Oaks Mall.  I went along because I wanted to stop at the corporate Verizon store in Novi.

I don’t usually go along with Linda to her haircut appointments since she now cuts my hair at home, but it was good to see Renee again.  She did a nice job with Linda’s hair and we were out of there in under 30 minutes.  For many years the Verizon store was located on the Twelve Oaks Mall property near Twelve Mile Road but it recently moved, so we put the address in the GPS unit.  The new location was nearby on Novi Road just the other side of I-96 from Twelve Oaks and West Oaks Malls.

We were assisted by Christina, who was both knowledgeable and helpful.  We went in thinking we might upgrade both of our phones and our Mi-Fi device and increase our data plan.  I was interested in the AC791L Mi-Fi device.  They did not have one in stock but she knew what it was and said we could have one delivered to our house on Monday via FedEx.  We then looked at phones and Christina steered us towards the latest offerings from Motorola.  We selected one for pricing purposes and she worked up the costs, including a higher data plan.

The new phones would have each cost $26 a month for 24 months, and the extended warranties would have been another $11 each per month for as long as we cared to pay it.  The phones had some nice features—specifically a shatterproof screen, wireless charging, and a screen-facing flash (for those all-important selfies)—but $74/month ($37 x 2) for two years seemed like a lot of money to us, especially given that our Samsung Galaxy S3 phones still work just fine.  Another negative for us is that the new phones are also bigger and we like the size of our S3’s.  Besides, I have a belt clip flip-top soft case for mine that fits nicely and works well.

Offsetting the increased phone costs was the fact that the line charges for our phones would drop from $40 per month per line to $20 per month per line.  Also, the $80 we currently pay for 10 GB of shared data per billing cycle would now buy us 12 GB of data for the same time period.  Finally, upgrading the phones would get us an additional 2 GB of data per phone per billing cycle for “life”, so our 12 GB plan would actually be 16 GB.  We would lose the bonus data, however, if we ever reduced the monthly gigabytes on our plan.

In looking at the cost worksheet I noticed that for $100 per billing cycle we could get 18 GB of shared data and bump that up or down at will without losing anything.  In the end we bought the AC791L Mi-Fi device for $90 ($100 with a $50 rebate and a $40 activation fee), changed the data plan to 18 GB for $100 (per billing cycle), and decided to keep our current phones.  Ignoring the one-time charges connected with the new Mi-Fi device we increased our monthly data from 10 GB to 18 GB, got a new/better Mi-Fi device, dropped our monthly cost from $180 to $160 (before taxes), and were not locked in to anything.  Christina also said to keep our eyes open for special deals on phones, especially around Mother’s Day and Father’s Day.  Roger that, and will do.

By the time we got back to I-96 and Grand River Avenue (GRA) in Brighton it was 3 PM so we stopped at Brighton Honda to check on my car.  While waiting for parts the technician got shifted to another job so my car was not ready yet.  Making a left out of the dealership onto GRA is always difficult and can be impossible in heavy traffic.  Our solution is often to turn right and go to Panera on GRA just south side of I-96, which is exactly what we did.  They did not have any decaf brewed but were happy to make some for us.  It had been cool and overcast all day so we sat by the gas fireplace and enjoyed several cups of coffee.

While we were sitting there I took a minute to call Philip Jarrell and let him know we were back in town.  We discussed the French drain he installed at the west end of property last fall, which seemed to be working well, and the trenching on the other side of the road, where the culvert empties, which had become a small pond.  I mentioned that the new driveway and RV pad looked nice, and that I really wanted to get the ham radio tower erected this year.  That project would require his services for a morning.  By 4:15 PM I had not heard anything further from Gary at Brighton Honda so we drove home.

Gary called at 5 PM to let me know the car was done and the technician was test driving it to make sure everything was correct.  The dealership was open until 8 PM, and we did not want to fight rush hour traffic, so Linda fixed dinner.  We had a salad of arugula and Italian kale with slivered almonds and dried cranberries, microwaved sweet potatoes, and vegan Italian sausage.  Everything was very tasty and I particularly liked the spices in the mock sausage.  Linda tries to make our diet primarily plant-based whole foods, but not having been vegans for most of our lives we find a certain satisfaction (comfort) in the occasional veggie burger, soy hotdog, seitan stroganoff, or other “mock” dish.

After dinner I hung up some laundry and started another load in the washer.  I checked e-mail and had one from my niece Amanda.  She and Ryan were looking at Wednesday, September 27, 2017 as a wedding date and wanted to know if all of us could make it to Hermann, Missouri for the event.  I replied that it would not be a problem for Linda and me and cc:d Brendan and Meghan.  I then texted both of them to alert them to the e-mail.  I also had an e-mail from Kate de Fuccio wanting to know when we expected to be back in Michigan.  I let her know we were back and had gotten preoccupied with opening the house and unloading the bus, but I felt bad that I forgot to text her as soon as we were home.

I also had a reply to my WiFiRanger support ticket requesting that I send screen shots of three of the tabs in the control panel.  I replied that I would try but did not mention that I really wasn’t sure how to do that.  Linda (the Google Queen) suggested that I “Google that” so I did.  It turns out that “alt+prtsc” captures the current window as an image and copies it to the clipboard.  From there you can do what you want with it.  Easy breezy.  (I subsequently ended up with something called “Easy Capture Manager” on my computer that just requires me to push the “prt sc” key and then lets me select what I what to capture.)

By 6:545 PM we were headed back to Brighton Honda to retrieve my car.  Linda dropped me off and returned home.  I paid the bill and returned home a few minutes later.  Thursday night is CBS comedy night and by 8 PM we were ready to just sit and laugh.  But first I had to transfer some of the laundry from the washing machine to the dryer.  I worked on blog posts while being entertained and hung up the dry laundry before going to bed.

2016/04/22 (F) Networking

I was up a little later than usual last night and would have slept in this morning but the cats had other ideas; they always do.  We were up by 8 AM and I made a pot of the Costa Rican Terrazu half-caff coffee that we bought yesterday at Teeko’s Coffee and Teas.  We were both still a little tired, and the thick fog further subdued our moods.  We countered that by treating ourselves to an easy start to our day enjoying our coffee in the living room to the warm glow of the fireplace.

We eventually got dressed, had breakfast, and got on with our day.  Linda got a call from Bill, who handles computer and networking technology for the bakery, and he walked her through the VPN setup for the bakery’s upgraded server.  She then made a grocery list and went shopping.  When she returned I discovered two boxes on the front porch.  UPS had obviously been here without my being aware of it.  The large box was the Instant Pot Linda ordered the other day and the small box was my prescriptions, which I was not expecting to see for another week.

My main focus for the afternoon was dealing with networking issues.  I uncoiled a long Cat 7 Ethernet cable that I found in the ham shack yesterday.  I unplugged the network cable for Linda’s computer from our AT&T gateway/router and plugged in one end of the Cat 7 cable in its place.  I took the other end of the cable into the bus, plugged it in to the HP Color LaserJet 3600 printer, and turned the printer on.  I brought my laptop computer upstairs, connected it wirelessly to the gateway, and tried printing a simple Word document without success.  I checked the printer settings and the TCP/IP addressing mode was configured for a manual address that did not match the address range of our home network.  I reconfigured it for DHCP and it acquired a new IP address in the correct range.  I tried printing again but it still did not work.  I reconfigured the address in the printer device properties on my computer and was finally able to print.  That was a relief as we would really like to leave this printer on the bus and have it networked rather than operating from a USB cable.

I then turned my attention to the WiFiRanger Mobile Ti (WFR-MTi).  I took my computer to the bus so I could use it to control the WFR and capture screen shots.  I was able to connect it to the WFR without difficulty but the WFR could not “see” (detect) any external Wi-Fi signals even though it is on the roof outside the bus and my computer could see them from inside the bus.  Back in the house I plugged in the Amped|Wireless SR20000G Range Extender / Router and configured it to repeat the AT&T gateway which does not broadcast a very strong signal.  Back in the bus my computer could see the strong signals from the Range Extender but the WFR still could not detect any external Wi-Fi signals.  I captured the screen shots for the MAIN, WIFI, and SETUP tabs, as requested by technical support at WiFiRanger, and pasted them into Word documents for uploading to their support system.

I took my computer back to my basement office and cabled it in to the network switch.  I wrote a reply to the WiFiRanger tech support thread, attached the screen shots, and posted it.  Clearly the WFR is not working and I am certain I will end up requesting an RMA and returning it for service, probably sooner than later, but I wanted to start with the online tech support system in case they had any good ideas that had not occurred to me.

Linda spent the afternoon getting acquainted with the Instant Pot and running it through its test procedure.  It checked out as fully functional so she used it to prepare seitan stroganoff for dinner.  I laid down at 5 PM and napped for an hour, finally getting up at 6 PM when Linda put our dinner salads on the table.  She served the stroganoff over brown rice with a side of steamed broccoli and the whole meal was wonderful.

We sat in the living room until 8 PM and then decided to watch Sleepless in Seattle on PBS.  I had forgotten what a good movie it is and enjoyed seeing it again.  Linda fell asleep right after the movie ended and I watched Episode 6 of Ken Burn’s JAZZ before calling it a night.  Like all of Ken Burn’s documentaries, JAZZ is a masterpiece of historical storytelling.  At some point I would like to watch all 10 episodes back-to-back.

2016/04/23 (S) Ham & Eggs

Today was our first Saturday back home, and that meant it was also our first opportunity to have breakfast with our fellow amateur radio operators (hams) from the South Lyon Area Amateur Radio Club (SLAARC).  Before going to sleep last night I set wake-up alarms for 7 AM this morning, but I was awake before then and had time to grab a quick shower before getting dressed.  I also took a few minutes to reattach the ham radio antenna to the magnetic mount on my car and reinstall the ICOM IC-2820 radio control head and microphone.  Even so, we were still on our way by 7:30 AM and arrived at George’s Senate Coney Island on the north edge of South Lyon around 7:50 AM.  During the drive I was part of a group chat with Steve (N8AR), Mike (W8XH), and Bill (W8NN), who was on an HT while riding with Larry (K8UT).  The Yaesu Fusion repeater sounded good and it was good to be on the air again with friends.

Besides our coffee, dry toast, and dry English muffin, Linda and I split a fresh fruit plate.  It was OK at best, but we don’t go for the food.  It was good to see and talk to folks in person and to be back into this part of our “at home” routine.  Today was testing day so a few people left to run the testing session, but most of the group, which numbered 19 people, stayed until 10 AM.

There was an accident this morning on westbound I-96 just east of the US-23 interchange.  It was still being cleared when we drove home so we got stuck in a traffic backup that could easily have been avoided.  Fortunately we did not have to be any particular place by any particular time and worked our way slowly through the congestion.

Back at the house I worked at my desk while Linda started cooking black beans in her new Instant Pot as she wanted to use some on a salad for our lunch.  Normally she would have to soak dry beans overnight and then cook them for quite a while, but the Instant Pot, which can function as a pressure cooker, took them from bag-to-plate in 45 minutes, during which time Linda went for a walk.  Pressure cookers can be very useful.

Once we got back to our house my initial task was to proofread and markup corrections to my article in the latest draft of the June 2016 issue of Bus Conversion Magazine.  Once that was done I uploaded the PDF to a folder in my Dropbox and e-mailed Gary and Jorge that it was there.  Next I checked my WiFiRanger support ticket and discovered that my reply yesterday, with screen shots attached, did not post correctly.  I replied again and this time it posted correctly, or at least appeared to.  With that task taken care of I copied a few images from the Sony a99v camera to my computer.  I then started transferring files from my computer to the NAS that we had with us in the bus.  I was about to start copying files for from that NAS to the older one we left at home when Linda called me up to lunch.

She made a large salad for each of us with tomatoes, blueberries, sliced strawberries, black beans, slivered almonds, and dried cranberries with a balsamic vinaigrette dressing.  She also made some hot tea after lunch which we took to the living room.  Both of us were tired and by 2 PM laid down and took naps.  It was 68 degrees F in the house but it felt very cool.  I think winters in Florida and Arizona have reset my comfort zone from 70 degrees F, plus or minus, to 78 degrees to 80 degrees F.  Jasper found a sunny spot on the floor by one of the living room windows and Juniper curled up with me.  I got up at 3:15 PM and took my iPad out on the deck to work in the crisp air and warm sun.  Linda came out around 3:45 PM but decided it was too cool and went back inside; I did the same around 4 PM.

Linda arranged for us to meet John and Diane Rauch at Camelia’s Mexican Restaurant at 6 PM.  Camelia’s is walking distance from our old house, but we never walked there because the route was not pedestrian friendly.  It’s a half hour drive from where we live now.  I reinstalled the cellular booster in my car and we left at 5:20 PM to leave a little extra time in case we encountered traffic problems.  And sure enough, we did.  The right lane of eastbound I-96 was closed where it ties in to southbound I-275 as the right lane continued to be closed for a construction project.

Our children’s grade school vocal music teacher, Jennifer Davidson, (who moved here from Tennessee) once remarked that Michigan only has two seasons “winter and road construction.”  Truer words were never said.  We stayed to the left, because that’s what we had to do to get onto eastbound I-696.  Although traffic was slow it was moving, unlike the right hand lanes trying to stay on I-96/I-275.  Vehicle speeds returned to “normal” once we got past the split, which around here is 5-to-10 MPH over the maximum posted limit, and a few minutes later we exited the freeway at Orchard Lake Road.  This is the same exit we used for 35 years to get to our house, and I have undoubtedly used this exit more than any other Interstate highway exit in country.  It was familiar, yet strange, as we rarely get back here anymore except to visit with John and Diane, meet someone at Camelia’s (or one of the other many restaurants that can be accessed from the Orchard Lake Road exit), or go to our optometrist or veterinarian, both of whom are two to three miles south of this exit.

We had our fill of chips and salsa and split an order of vegetarian fajitas.  They were OK, and much better than the ones we had a week ago at Mi Camino Real in Logansport, Indiana.  After dinner we went to John and Diane’s house, which is very close to the restaurant, and continued a nice conversation in a quieter setting.  By 9:30 PM we were all tired and started wrapping up our visit.  We left a little before 10 PM, got home at 10:30 PM, and went right to bed on stomachs that were still very full.  WTVS (Detroit PBS) was fundraising around an early Rolling Stones performance that did not grab my interest so I watched Lidia’s Kitchen and the beginning of Martha Stewart’s Cooking school.  She was filleting fish so I turned the TV off and went to sleep.

2016/04/24 (N) Family

We went to bed on full stomachs last night and I did not sleep well, suffering from indigestion for much of the night.  I should have used a second pillow and tried sleeping on my back with my head elevated, but that is not a natural sleeping position for me and I doubt that would have slept any better.  To compensate for the poor sleep I stayed in bed and kept falling back to sleep.  Linda was up way before me, having apparently slept better than I did, and I finally got up to stay at 9 AM.  That was unusually late for me, but at least I felt somewhat rested.

As soon as I got up Linda sliced oranges for our breakfast and prepared to toast bagels while I prepared our morning coffee.  We were not quite done with our preparations when I got a phone call.  It was from Chuck Spera so I answered it.

Chuck and I talk frequently but not usually at 9:30 AM on a Sunday morning.  He and Barbara were on the road and had just crossed into Kentucky on I-75 having left Sevierville, Tennessee early this morning.  Before pulling out this morning Chuck had noticed a little oil by the driver side tag axle during his walkaround, specifically in the holes of the Alcoa aluminum wheels.  He had removed the decorative hub cap and found an oil film there as well, but did not see any pooling.  He assumed that an axle seal was leaking a little but was not sure how to check the oil level in the hub or add oil if needed.  Because of both past and recent experiences, Chuck figured I would know the answers to both questions.  While that was probably unjustified optimism, in this case I did, and gladly shared what I knew about the sight glass and rubber plug in the wheel hub for the oil reservoir.

We had just finished our bagels and orange slices when Brendan texted Linda to see about plans for today.  We had all planned on getting together at Meghan and Chris’ house this afternoon to visit and have dinner but Madeline had come down with Hand, Foot, & Mouth disease (a virus) earlier in the week and Brendan thought he might be getting it too.  Given that Linda had not yet fully recovered her hearing we agreed that it would be best to avoid contact until we knew that no one was contagious.

Madeline was understandably disappointed that she would not see us today and, in lieu of that, requested a FaceTime session.  We were equally disappointed that we would not get to see her (and her parents) but an hour of FaceTime made up for it a bit.  After our FaceTime session we lingered in the living room by the fireplace enjoying our coffee and doodling on our iPads.  We finally got dressed at noon and left for Meghan and Chris’ house at 12:30 PM.

We arrived around 1:15 PM and were greeted by our daughter with a paper grocery bag full of some of our mail.  We had a long, relaxed afternoon to visit and catch up.  Meghan made vegan burgers from scratch and a salad with beans, corn, red bell pepper, and avocado with a lime-based dressing.  We brought a bottle of Barefoot Red Moscato and I found it very much to my taste (sweet).

We departed just after 7 PM and stopped at the new Gas 2 Go station at the northwest corner of I-96 and Latson Road.  The station was still under construction when we left in November.  I was pleased to see that it is a Shell Oil Company station with a Tim Horton’s.  I have had a preference for Shell gasoline for most of my adult life and Tim Horton’s has coffee on a par with Dunkin Donuts, although I do not like the lids they use.  There is also a traffic signal on Latson at the side road for the station, no doubt because this is also the access road for the Livingston County Road Commission complex.  (Leave it to them to take care of themselves while the rest of rest life and limb to get out of the Lowe’s/Walmart center just south of there.)  Whatever the reason, it will slow down traffic exiting I-96 and heading south on Latson Road, making it easier to get out of the Lowe’s/Walmart parking lots.

We were home a little after 8 PM and turned on the TV to watch Grantchester on PBS and Elementary on CBS.  Around 8:40 PM I realized I had missed the SLAARC Information Net which started at 8 PM.  I need to reestablish the habit of tuning in on Sunday evenings, but that time slot competes with some of our favorite programming on PBS.

2016/04/25 (M) Pick Up Sticks

We had a typical start to our day.  After catching the weather on channel 10.2 we were up by 8 AM, had coffee and granola with blueberries and bananas, and used our iPads in the living room with the fireplace turned on.  Our Kitchen Aid mixer broke last year and today Linda was finally ready to replace it.  She decided to get the slightly larger and more powerful model with the crank up mixing bowl as she wants enough power to mix bread dough.  She also wanted it in white to match most of the other kitchen appliances.  To our surprise the white color was more expensive than red or blue but less expensive than some other colors including copper bronze.  She was trying to convince herself that red or blue would be OK but I convinced her to order white.  All of our appliances (and cabinet knobs) are white.  With Amazon Prime it will be here on Wednesday.

The weather forecast was calling for a cold front to move through our area triggering rain, and possibly thunderstorms, starting late in the afternoon and extending through the evening and into the overnight hours.  The grass in most of the yard is not very tall yet, except right in front of the house by the concrete driveway.  The yard is also moist, but not soggy, and we do not expect Keith to be here to cut the grass for the first time this season until sometime next week at the earliest.  The temperature mid-morning was in the low 60’s and was forecast to reach a high of 72.  All-in-all it was an excellent day to pick up sticks around the yard in advance of Keith’s first visit and get the Honda self-propelled lawn mower out and cut the grass in front of the house.

I started my yard cleanup with area around the front berms, raking small branches out of the grass and stacking larger ones on existing brush piles.  While I was working out front a UPS truck showed up with our Max Burton Induction Cooktop and our new Verizon Mi-Fi unit.  I signed for the Mi-Fi and took the packages inside.  Linda used the induction cooker to make some nectar for our hummingbird feeder and also prepared a batch of homemade granola.  She eventually came outside and helped me pick up some of the downed tree limbs in the back yard.  We got the easternmost two acres (2/5ths of our yard) picked fairly well.  We will work on the westernmost three acres another day.

I got the Honda lawnmower out and topped up the tank with fresh fuel.  Small engine Honda equipment is known for starting on the first pull, but my experience is that this is only true when they are new.  No doubt our lawnmower needs to be cleaned up and tuned up, and would start more easily if it was, but I eventually got it started and once it warmed up it ran fine.  I mowed the little bit of the lawn near the house/driveway that looked like it was overdue for a cut.  This is also one of the only parts of the yard anyone really sees if they pull into the driveway.

I had just shut the lawnmower off and was putting it in the garage when the U. S. Mail truck pulled into the driveway.  It was our mail carrier, Michelle, and she had a very large box for us, along with our typical bundle of Monday junk mail.  The box was not very heavy and Linda informed me that it was the 48 rolls of toilet paper she recently ordered.  Well, alrighty then.

It was approaching 1 PM so Linda made salads for our lunch with the leftover bean-corn-tomato salad (that Meghan made yesterday) on top of a bed of mixed greens.  After lunch Linda took her Amateur Extra flash cards outside to study and I focused on getting the new Verizon Jetpack Mi-Fi (Netgear AC791L) assembled and activated.  Assembly consisted of installing the Lithium Ion battery and back cover.  I decided to charge it for a bit while I read the user guide and activation procedure.

When I was fairly certain I had all of the information I needed at my fingertips I called the 877 activation number and keyed in the requested information.  It took a couple of tries to get it right but I finally did.  With the activation completed I turned the device on, looked up the SSID and Password, and connected my iPad to it.  I then entered the relevant information in a new entry in Passwords Plus.

I got a phone call from Gaye Young and chatted with her at some length about RVillage and its relevance to FMCA.  (Gaye is the FMCA National Secretary and chairperson of the National Education Committee.).   She and husband Jerry are at the Rally in the Pasture at FMCA National President Charlie Adcock’s place in Arkansas (or maybe it’s Alabama?) and I knew from talking to Curtis Coleman last week that he was on his way there too.  A year and a half ago the NEC researched and recommended that FMCA partner with RVillage and a year ago the FMCA executive board accepted and endorsed that proposal but then nothing happened.  The FMCA Executive Director was recently let go and Charlie is now trying to get the RVillage train back on the tracks, along with lots of other things as FMCA continues to loose members at an alarming rate.

I suspect that the loss of members is a combination of several factors.  For one, the median age of FMCA members has been in the upper 60’s for quite some time.  That means a certain number of members are “aging out” almost daily.  For another, the downturn in the economy in 2007 was particular hard on the RV industry.  Not only was the industry slow to recover, when it did it was building mostly towables, not motorhomes.  In the past many RV dealers basically “included” an FMCA membership with the purchase of a motorhome, or at least provided information about the Association and an application form.  Another possible factor is that RVers under 50, including Gen-Xers and Millennials, don’t tend to join things.  FMCA is not the only organization suffering membership decline and having difficulty attracting new members, especially younger ones.

Chuck and Barbara got home yesterday and were settled enough for Chuck to call me at 5 PM and update me on their hub oil leak.  Linda made salads for dinner and reheated the brown rice and seitan stroganoff.  After dinner I replied to an e-mail from Gaye and then settled in to watch TV with Linda.  And so it goes.

 

2016/4/16-20 (S–W) From Ham to Home (Again)

1 Reply

2016/04/16 (S) A Local Hamfest

I heard Butch and Fonda get in their car a little before 6 AM this morning and leave for the quad-county hamfest at the fairgrounds between Peru and Mexico (in North Central Indiana, not Central America).  I got up quietly at 7:30 AM, got dressed, put my camera in the car, and walked over to Small Town Brew to say “good morning” to proprietor Lisa Paul and fill my coffee thermos before driving to the hamfest.  As I approached the coffee shop I sensed that something was amiss.  The lights were off and something about the appearance looked different.  A closer view revealed that the interior had been redone and the name Small Town Brew was nowhere to be seen.  “The Branded Bean” was written on the window instead, but regardless of the name it clearly was not open for business.  I walked back to my car and drove to the hamfest about 10 miles away, slightly disappointed at not starting my morning with a nice cup of coffee and a cheery chat with Lisa.

There were quite a few cars parked around the venue when I arrived.  I’m not sure why, but hamfests and swap meets always seem to begin at sunrise and end by early afternoon.  Perhaps it’s a certain residual military influence or because it just leaves the rest of the day open to go home and play with new found treasurers.  Whatever the reason, I paid my $5 admission, got my door prize ticket, found Butch to say “good morning,” and then got some coffee.  Fonda was already taking her Amateur Radio Operator General Class license examination and Butch was busy with potential buyers so I walked the aisles in search of ham radio or other treasurers I could not live without, but did not find any.

Hamfests and swap meets are mostly cash only affairs unless there are larger commercial vendors there, in which case they might take credit cards.  I do not carry much cash, which is a good way to make sure I don’t spend much money buying junk I don’t need.  I did find a placemat size laminated grid square map of the United States for $5 and a laminated letter size sheet with the U.S. Amateur Radio frequency allocations for $1 and bought those.  Butch liked them so I went back and got a set for him too.  I also found some relays mounted to substantial heat sinks.  The seller had four of them for $1 each so I bought one without any specific purpose in mind.  The heat sink alone was worth more than $1 and Butch bought two of them later.

I eventually sat down at Butch’s tables and chatted with him (when he wasn’t busy) while we waited for Fonda to emerge from the testing room.  When she did she had a big grin on her face and we knew she had passed the test.  She only missed one question out of 35, which was an excellent performance.  Butch immediately got their W5YI / Gordon West General Class Study Guide and CDs out of a storage tub and put them out for sale.

Although Fonda had not studied for the Amateur Extra Class license exam she decided to take it since there was no additional testing fee beyond the $15 she had already paid to take the General Class test.  I decided to stick around and keep Butch company (not that he needed me to do that) until Fonda finished the Extra exam.  She got 19 items correct out of 50, not enough to pass but not bad for not having prepared, and it gave her a sense of what the test is like.  She wants to get her Amateur Extra license before the end of June as a new question pool goes into effect on July 1, 2016, and is very different from the current item pool.

I spent a few minutes talking to a soldier from the Indiana Army National Guard about the Hum-V they brought to the event and then returned to our rig in Twelve Mile.  I told Linda that Fonda had earned her General Class license (which Linda already has) and that Fonda was determined to get her Amateur Extra Class license by the end of June.  Not that Linda typically responds to a challenge, but this seems to have rekindled her interest in doing the same.

I had not eaten breakfast so we had vegan hot dogs and fresh fruit for lunch around noon.  I worked on blog posts until 1:30 PM when Butch and Fonda returned from the hamfest and I helped them unload their truck.  We all sat around chatting for a while but we were all very tired and Butch/Fonda needed to eat, so we returned to our motorhome to take naps.

Butch and Fonda had not reappeared by 5 PM so Linda checked to see if they were up as we wanted to go see the progress on their “new” house in Metea.  They were up so that is what we did.  We were at the house for over an hour looking at the interior reconstruction and discussing the plans for what was still to be done.  The house will not be ready to occupy this year and their hope/plan is to have it ready in 2017 before they leave again for the winter.

The property was seriously distressed but they got it for a good price.  Besides the house, which they are gutting and rebuilding inside, there is a 40′ W x 48′ L building with a concrete floor and two 12′ W x 16′ H overhead doors.  They could not build a new building like that for what they paid for the entire property.   We know, because we have been trying to figure out how to put up a similar building on our property.  Still, they bought themselves a big project and it is going to take some time and money to make it habitable and useable, or saleable if that is what they choose to do.

Fortunately they are now “retired” and still have the place in Twelve Mile to live as well as the converted bus.  Indeed, they still have an enormous amount of work to do to get the Twelve Mile property ready to sell.  It is an unusual property, having started life as a GM dealership in the 1930’s and only closing in 1981.  It then housed an electrical harness manufacturing operation before Butch and Fonda acquired it more than 20 years ago.  They turned the old showroom area into living quarters, retained the two bay auto service area for that use, as it has a functioning in-ground lift, and repurposed the rest of the space as a parts room, machine shop, wood shop, and warehouse for their business.

All told they have about 12,000 square feet under roof on two acres in the center of town on a state highway within very short walking distance of a bank and Post Office.  All-in-all, it has served their business and personal needs quite well over the last two decades but is now much more building than they need having sold off much of their business inventory in 2014 and closed Service Motors as an active supplier of parts for Crosley automobiles.  It will make an excellent building for someone, but it is going to have to be a buyer with specific and appropriate needs.

By the time we left it was 7:30 PM so we drove to the Mi Camino Real Mexican restaurant in Logansport for dinner.  Linda and I split a taco salad (no meat or dairy) and an order of vegetarian fajitas (no dairy).  We sat a long time after we were done eating just chatting before returning to Twelve Mile.  It was 9:45 PM by the time we got back so we called it a night and went our separate ways.

Back in our rig I checked my e-mail.  I had several from Gary at BCM, one of which had the first draft of the June 2016 issue.  My article on servicing the Webasto DBW2010.75 Diesel Burner is in that issue and needed to be proofread and corrections noted.  I made a first pass at that, replied to a couple of e-mails, and went to bed.  It had been a long but satisfying day and tomorrow was the first morning since this past Tuesday that we did not have to set an alarm and/or get up early.

2016/04/17 (N) Parts Shuffle

Fonda goes to church on Sundays.  She typically leaves around 9 AM and gets home between noon and 1 PM.  Butch is often up very early but not necessarily ready to interact with the world except through his computer so I tend to not bother him first thing in the morning.  We had a leisurely morning sitting around in our sweats (pants and shirts), enjoying our coffee, and eventually having breakfast.

When I finally got dressed and was in the humor to work, I unloaded the old tag axle caliper, old-old brake pads (not the ones I burned up), and the old torque plate, along with the new left-hand caliper rebuild kit, and moved them into Butch’s machine shop.  I also moved the old/broken Shur-Flo 4048 12 VDC water pump to his shop as he wants to see if he can figure out what failed and why.  With all of that stuff out of the car I repacked it to try and evenly distribute the weight of the remaining cargo.

Late morning I texted Jarel Beatty in Logansport to let him know we were here and invite him to come out and see the cabinetry he built for us last year as it was finally installed in the bus.  He had a shooting competition at 1 PM at the gun club/range near Twelve Mile and said he would try to stop by afterwards.

I had finally located the 24VDC regulator yesterday and showed Butch where it was located on our bus at the outside rear corner of the storage bay over the DS drive axle.  It was a very convenient location except that Royale Coach installed the slide out storage tray tight against the cover, making it impossible to remove without first removing the tray, which did not look easy to do.  Butch suggested that I unplug the chassis battery maintenance chargers, connect the batteries, and leave some of the bay lights on to draw off the surface charge so we could get a more accurate reading of the battery voltage later.  He also wanted to draw down the battery voltage a bit so that the alternator would have some work to do after starting the engine.

We were discussing how to deal with the failure of the regulator or alternator on the road and Butch suggested that I could always maintain the chassis battery voltage with a battery charger powered from the onboard genset.  I mentioned that besides the sophisticated, but low current, maintenance chargers that I have installed the coach came with a 24V emergency charger hardwired to the chassis batteries and powered from a 120 VAC outlet in the electrical bay.  The instructions for that charger, however, clearly indicate that it is for short time emergency charging to get the engine started and not for continuous use.  It given its age it is clearly not an “intelligent” multi-stage charger and would boil the electrolyte if left connected for too long.  Butch suggested that I remove the emergency charger and replace it with a modern, high amperage one that could be used to run the batteries and not just top them up for starting.  That seemed like a good idea to me so I added it to my (mental) project list.

Butch has been redoing the solar battery charging system on their bus and had one solar panel still to install.  Since it was loose he had me photograph the mounting rails he devised and attached to the long edges of the panel flanges.  The photos were for a future BCM article.

Jarel showed up sometime after 3 PM.  We showed him how we had installed all of the cabinetry and woodworking he had done for us based on my design drawings.  He had been in the bus several times before to discuss the project, so he had a good idea of what we were trying to accomplish, but visualizing it was one thing and seeing it quite another.  He really enjoyed seeing how the project turned out and took some photos with his phone to show his wife.

Linda started preparing dinner around 4:30 PM.  Jarel stayed and chatted until 5 PM and then went into Butch and Fonda’s house to visit with them and their dogs, Rascal (a Jack Russell Terrier), and Daffy (some kind of wire-haired Terrier mix thing).

While Jarel was visiting I borrowed a set of jumper cables from Butch and some sandpaper.  I used the sandpaper to clean the two terminals in the passenger side engine bay that are used to jump start the engine.  I then attached the jumper cables in such a way that the free ends could not touch, or the positive lead short to the chassis, by clamping the ground lead to a rail in the bay and setting the positive lead on a piece of cardboard on the ground.  I then clamped my VOM leads in the two jumper cable clamps so we would not have to hold them.

After Jarel left we checked the voltage on the battery bank.  It was 24.95 VDC.  A fully charged lead-acid battery bank at rest would be 25.2 VDC, so the voltage was reasonable given that I had the maintenance chargers off and there were some small loads on the system.  Butch had me start the bus motor, let the oil pressure come up, and then shut it off.  He had me start it a second time and then shut it off, and then start it a third time and leave it running, switching it to high idle.  While I was doing all of that he was monitoring the voltage on the VOM.

The voltage was showing just over 28 VDC, which is what we expected from a properly adjusted, correctly operating voltage regulator.  The voltage rose slightly when I switched the engine to low idle, but the batteries were probably fully charged by then and the current draw was probably minimal.  In any event it did not rise above 28.5 VDC, nowhere near the 30 VDC that would trigger a “high battery voltage” warning light on the dashboard.  There was also no indication of the alternator/regulator not producing adequate voltage as the “low battery voltage” warning light (the same light, actually) is triggered by a voltage below +24 VDC.

While the engine was running I made a mental note of the position of the needles on the two analog battery voltage gauges in the dashboard.  The “24V” gauge was higher than the 28V mark by a full needle width, i.e., there was a needle width gap between the 28V position and the left edge of the needle.  The gauge is only marked every 4 volts so it looked to me like it was reading around +29V.  The “12V” gauge was sitting right on the 14V mark.  The “24V” gauge should read 28 VDC and the “12V” gauge should read exactly 1/2 of that if the Vanner equalizers are working correctly.

Our simple test did not preclude intermittent problems with the alternator and/or voltage regulator that might occur after they were warmed up, and/or vibrating with the engine rotation at full RPM, and/or bouncing down the road.  It also did not rule out problems with the Vanner battery monitoring system, which is what controls the warning lights on the dashboard.  We also did not check the voltage at the battery bank center tap to see how closely it matched the gauge on the dashboard or how closely it was tracking 1/2 of the overall voltage as a check on the operation of the two Vanner Battery Equalizers.  Still, it appeared that the alternator and regulator were functioning correctly.

Linda made black beans and rice for our dinner and Fonda made baked squash and pork chops for their meal.  We also had carrots, grapes, strawberries, and pickled vegetables, including okra, to share around the table.  After dinner we got out our lawn chairs and sat outside for a while, pretending we were “camping.”  The air temperature dropped as the sun set and we finally put the chairs away and went inside the house to continue visiting as we had no way to make a campfire in their driveway.

By 10 PM we were all tired.  I asked Butch if I could use his big auto shop air-compressor in the morning to adjust our tires and he said he would turn it on and put the hose out first thing.  We returned to our coach and were fairly quickly off to bed.

2016/04/18 (M) Twelve Mile To Turkeyville

I was awake at 6 AM and finally got up at 6:30.  I put on my sweats, fed the cats, and prepared our morning coffee.  I noticed that Butch had already put the air hose out where I could use it so I checked/adjusted all of the tire pressures while the coffee brewed.  I also turned on the TireTraker TT-400 receiver/monitor and plugged in the repeater in the PS rear closet of the bus.  The outside air temperature was in the low 50’s F and all of the tire pressures were slightly below the cold pressures I like to run so I adjusted them.

After all of the tires were adjusted, and the air hose and tools were put away, I went inside the bus and used the monitor to check all of the tire pressures/temperatures and make a chart showing the actual and indicated values for each tire.  All of the sensors indicated pressures higher than the ones I had just set, using a known good digital tire gauge, by 1.0 to 4.5 PSI.  While this was within the specified “precision” of +/- 4% for the sensors, it was not as accurate as I think it should be.

Linda was up by this time but waited for me to have coffee and cereal (homemade granola) for breakfast at 9 AM.  Today is a travel day for us, and we would not normally have coffee or breakfast on a travel day, but we were not planning on leaving until around noon for the 3-1/2 hour drive to the Camp Turkeyville RV Resort near Marshall, Michigan.  We will also pass the Michigan Welcome Center / Rest Area and stop for fuel at the M-60 exit, so we will have opportunities to use facilities if needed.

After thinking about it overnight I decided that it did not make any sense for us to take the three new/rebuilt brake calipers home to Michigan only to have to haul them back to Indiana in a few weeks to have our mobile mechanic, Joe Cannarozzi, install them.  I borrowed one of Butch and Fonda’s hand trucks and move them from the car to the machine shop one at a time.  I then repacked the back of the car, which was now 300 to 350 pounds lighter than when we arrived in Twelve Mile.

Sometime between 9 and 10 AM I called Camp Turkeyville to make a reservation for today.  Angela was not in the office but a woman took our name and request.  The park was far from full and the reservation not really necessary, but we wanted to make sure we got a full-hookup pull-through site.  We visited for a while with Butch and Fonda before making our final departure preparations.  By 11:30 AM we were ready for the final steps in the departure process.  Linda moved the car from in front of the bus and battened down the inside of the bus while I got the shorepower disconnected.  I started the motor, let the chassis air up, and pulled it straight across the street into the grain elevator driveway where Linda pulled the car up behind it.  With the car connected and prepared for towing I restarted the bus engine and we did our light check.  Butch and Fonda walked over for one last, quick conversation and then it was time to go.  They never chat with us while we are hooking up as they know it can create a dangerous distraction.

We knew the exact route we planned to follow but entered the destination into the Rand-McNally GPS anyway.  Ever since I did the update at Florida Grande Motor Coach Resort the unit has been very sluggish in its response to screen taps but appears to still work.

I looped around through the grain elevator driveway back to IN-16 and headed east out of town.  At US-31 we headed north.  The GPS unit kept trying to get me to head east on county roads but I stayed on US-31 all the way to US-20.  At US-20 we headed east and stayed with that route all the way to I-69 in spite of the GPS unit’s repeated attempts to get me to turn north and head up into Michigan, presumably to pick up US-12.  At I-69 we headed north and soon enough we were back in our home state, the first time since November 27th last year.

About 12 miles into Michigan we stopped at the Welcome Center / Rest Area briefly and then continued or trip.  We exited again at Tekonsha / M-60 (exit 36?) and stopped at the Travel America for fuel.  The pump would not accept our Chase VISA card and we assumed that Chase Bank, ever vigilant with regards to its use as we cross state borders, had rejected it.  It turned out that the truck pumps were only set up to accept corporate/fleet cards so Linda had to go inside anyway and used one of our other cards to pay for the fuel.  All of this caused a bit of a delay but I eventually put 50 gallons in the tank.  I did not fill it because I did not want to put in the additives at this fuel stop.  I wanted to do that at the Mobil Truck Stop near our house and top it up just before getting home.

On our way once again we exited I-69 at N Drive North and a half mile to the west pulled into the entrance to Camp Turkeyville.  It was just before 4 PM and Angela was in the office and expecting us.  The site she planned to put us on had a car parked in it, without the owner around, so she moved us to a different one a few sites down.  It was a difference without a distinction and was an easy in, easy out, relatively level pull-through full-hookup site, which was all we cared about.  I adjusted the level and then shut off the motor.  The only hookup we needed for the rest of the day and evening was electricity so I took care of that and shut off the chassis batteries and air supply for the engine accessories.

Since we would only be here for one night we did not set up the interior the way we would if we were sticking around for even a few days.  We were parked facing south and the afternoon sun was bright and warm so I put out the awnings on the passenger side of the coach.  Gary, a fellow camper from a few sites down, stopped to chat and compliment us on our motorcoach.  After we wrapped up our chat we went inside and had an easy dinner.

One of our routines (traditions, rituals?) is to walk an RV park when we arrive unless the weather is very disagreeable.  The weather was near perfect this afternoon, and it was still plenty light at 7 PM, so we walked over to the Cornwall’s Turkeyville building to see if it was still open.  The building houses a restaurant, ice cream parlor, and general store.  They were open until 8 PM so we meandered through the store but did not buy anything as neither of us brought our wallets.  We strolled back to the campground and walked the outer loop before returning to our coach.

We had access to quite a few OTA TV signals and tuned in one of the CBS affiliates with a strong signal.  We watched our usual Monday evening TV programs and turned in for the night without setting an alarm.

2016/04/19 (T) Home Again

With the overnight low outside air temperature forecast to be in the upper 40’s we left the bathroom roof vent and bedroom windows open as we knew the outside conditions would make for wonderful sleeping conditions inside the coach.  We were tired, and did not have to be up at any particular time, all of which made for good sleeping snuggled under a thin blanket.  I got up at 8 AM, tended to the cats’ needs, and made 7 cups of coffee.  A little after 9 AM we had toast and preserves for breakfast.  We don’t usually have breakfast and coffee on a travel day, but today was the final leg of our winter 2015-16 snowbird season, and the trip from Camp Turkeyville to our home was only 80 miles, with rest stop opportunities along the way if needed.

Checkout time at Camp Turkeyville RV Resort is noon and our target was to pull out between 11:30 AM and noon.  Part of the reason for stopping here for one night before going home was to empty our waste tanks.  Another reason was to give us a short, easy drive at a time of day that avoided the rush hour traffic at the beginning and end of the work day.  This was the third year in a row that we have done this and it works very well.

We started tending to our departure tasks around 10 AM and would have been ready to go by 11 AM except for a very nice, but very talkative, neighbor.  Still, we were on schedule and not in any particular hurry.  We pulled out of our site at 11:30 AM and made the long, slow trip around the outer road of the campground to get back to the exit.  Once we were on I-69 N I set the cruise control at 63 MPH and let the bus roll.  I-69 between I-94 and I-96 is a concrete road made of small, discrete slabs, and you feel every joint between them.  But hey, it’s Michigan; we expect the roads to be in bad shape and we like it that way (not).  Well, apparently the majority of our fellow citizens like it that way, OR at least prefer it to paying taxes and enforcing weight limits and speeds.  If that wasn’t the case, our elected officials would do something about it.

There was rain headed our way but it was not expected until tomorrow or later.  Still, the sky was overcast and we had not traveled very far up I-69 when we started getting a light, intermittent drizzle.  It stayed with us all the way to Lansing where we picked up I-96 E.  By the time we got to exit 122 (M-52), where we stopped at the Mobil Truck Stop for fuel, we had driven out from under the rain.

Since the bus would be sitting for at least a couple of weeks I added Stanadyne Performance and Lubricity Formulas, and Racor Biocide before filling the tank.  It’s always better to have fresh diesel fuel but it is also good to store the bus with a full tank to prevent condensation from moist air in the tank.  My solution has been to use the Biocide and store the bus with a full tank.  If it is going to sit for any length of time I run the Parker Fuel Polishing Module to slowly filter it and remove residual moisture.

From the Mobil Truck Stop it was only 11 miles to exit 133 (M-59), another 10 miles to Hacker Road, and about 2-1/2 miles (on dirt roads) to our house.  This stretch of Hacker is scheduled for paving this year and we knew from the Livingston County Road Commission that work had already begun.  Indeed, the surveyors were working in the fall before we left for Florida.

The initial work this spring was the removal of trees along both sides of the road and as soon as we turned off of M-59 onto Hacker it was immediately obvious that this had occurred.  It was also obvious that the road had been very recently graded and that there had not been any rain since then.  We still took our time, keeping our speed to about 25 MPH, but it was one of the smoothest trips we have ever had in the bus along this stretch of Hacker.  To our delight, the grader had also obviously done our street recently and we noticed that a few of our neighbor’s had apparently trimmed or removed a lot of trees and bushes near the road.  Yeah!

As we got to the first of our three driveway entrances I stopped the coach and lifted the tag axle while Linda got out.  She always spots for clearance to obstructions and guides me into the final parking position.  There were a few larger tree limbs in the driveway so she picked those up before I pulled in.  Once I was positioned on the level parking pad area of the driveway I put the tag axle down.  The coach was close enough to level that I did not bother adjusting the suspension.  After letting it idle for a couple of minutes I shut off the motor and we started our arrival routine with one notable difference; Linda’s first task was to get the cats in their carriers, unlock the house, take them inside, and let them out of their carriers.  Coming home us a big deal for them, too.

I turned off the engine accessories air supply and the chassis batteries and connected the shorepower cord.  The circuit breaker for this electrical service is in the sub-panel in my office.  I turned on the wrong breaker the first time so it took a second trip to the basement of the house to get power to the coach.  We had no intention of unloading everything today but there were a few things we wanted to get into the house right away, such as wallets and keys.  At the top of my list was all of our computer, networking, and photography technology while Linda’s focus was on clothing and food.

Once we had our highest priority items moved into the house I texted the small circle of friends who we have been keeping in touch with about Linda’s illness and our bus problems to let them know we were home safe and sound with no further problems.  I then went to the garage, found our good battery charger, and connected it to the 12V starting battery in the Honda Civic Hybrid.  Brendan had told us a week or so ago that the battery was dead and when I connected the charger it would only accept about 2.5 Amps of current and quickly tapered off to less than one Amp.  That wasn’t much current for a depleted battery but I left it and went back into the house.

I checked a little while later and the charger had given up and displayed an “F01” error code.  I did not even bother looking it up as the car is a 2007 model and this was probably the original battery.  I decided to go ahead and get a new battery from O’Reilly’s in Howell, but first we had to unhook the Honda Element from the bus.  The car was filthy, having been towed at least 1,500 miles since it was last washed, but I stopped and got the new battery first and then went to the car wash just down the street on the same side of Grand River Avenue.  I then went to the Meijer’s supermarket at Grand River Avenue and Latson Road and picked up a few things.

Linda started preparing dinner at 5:30 PM and was just about to put the pizza in the oven when Butch called.  We chatted for about 15 minutes and he updated me on the removal of the radiator blowers and T-drive from their MCI MC-9 NJT bus.  This assembly is above the engine and almost the width of the bus but they were able to get it out using their forklift.  (It really is nice to have the right tools for the job.)  Butch noticed last weekend that a lot of the oil had leaked out of the T-drive and figured it needed new shaft seals, at a minimum, and might need new bearings.  With the assembly out of the bus Butch can conveniently do all of the needed work on a bench and repair/rebuild some other things while he is at it.

Our first dinner course was a nice salad with arugula and Italian kale.  The pizza was one of our favorites, an Amy’s Roasted Vegetables with Caramelized Onions.  By the time we were done eating it was almost time for our Tuesday evening CBS TV shows and I decided to replace the car battery tomorrow morning.  I did, however, move the NAS and my computer to my office and connect them to power and the Netgear switch.  To my great relief, the network interfaces on both devices still worked just fine.  Clearly, the Amped|Wireles SR20000G wired network ports had failed although I still do not know why and probably never will.

The 2015-16 TV season is coming to an end so the season finales are now airing and they are all cliffhangers, of course.  We went to bed at 11 PM, watched a rerun of Two and a Half Men, and a few minutes of The Late Show with Stephen Colbert before going to sleep.

2016/04/20 (W) Core Return

We love our bus, love being in the bus, and love the lifestyle the bus affords us.  But we are not true gypsies at heart, and we also love our house and property.  We like the anticipation of travel and the promise of new experiences, but we also like the comfort and stability of finally landing at home after a long voyage.

We slept in this morning and finally got up at 8 AM.  Some things are the same regardless of whether we are at home or in the bus, and morning coffee is one of them.  We were enjoying our morning brew when our son texted Linda to see if we were available to FaceTime.  Of course we were!  A short time later we were “face-to-face” with grand-daughter Madeline (and her parents).

Another constant is Linda’s homemade granola.  She managed to make enough of it, and/or we managed to limit our consumption of it sufficiently over the winter, that we still had some left for breakfast this morning.  We might have one or two more servings beyond today, but she will be shopping for ingredients and making a new batch very soon.  She will also be making sure we have the necessary ingredients on hand to make vegan pancakes and vegan cupcakes as we anticipate an overnight visit with Madeline in the very near future.

After breakfast we got dressed and got to work.  Linda called Alchin’s to restart our weekly trash pickup while I made a service appointment for the Honda Element.  We checked our home phone messages.  Only a handful of the 42 messages contained any actionable information.  I made note of those details and then deleted all of them.  I called Catamaran Home Delivery and ordered refills for two prescriptions.  I then called Keith at Kish Lawn Care to see when he was planning on starting our mowing this season.  Keith’s wife just had major surgery, and the grass has not grown much yet this spring, so the first cutting is probably still a couple of weeks away.

With our calls taken care of we turned our attention to replacing the 12V battery in Linda’s Honda Civic Hybrid.  The nuts on the two threaded hold down rods were badly rusted and did not want to come loose so I sprayed them with WD-40 and let them sit for a while.  I eventually got the nuts broken loose and backed off enough to remove the rods, but bent the retaining brackets in the process.  I put the rods in my bench vise, and finished removing the nuts.  We removed the old battery, transferred the anti-corrosion pads to the new battery, set it in place, and reinstalled the protective plastic 2-piece cover.  We connected the vehicle cables and then connected the good battery charger to it to bring it to full charge before trying to start the car.

Back in the house Linda unloaded containers of water from the house refrigerator and then wiped it out.  She then unloaded a few more things from the bus, including clothes and food.  I texted Jim and Kristine Gullen to let them know we were back and then started researching small tractors and mobile Wi-Fi devices.  Linda was getting ready to order an Instant Pot and a couple of 12VDC power adapters for our Rand-McNally GPS unit through Amazon and I suggested she look for the Burton portable induction cooker that we saw at Butch and Fonda’s place.  The Suntunpen unit we have now works fine but the Burton unit has two advantages over it; a completely flat/smooth top and higher maximum power setting.  She found it, added it to the cart, and placed the order.

Linda heated a can of Amy’s vegetable soup and we split it for lunch.  I checked the battery charger and it said the battery was full so I put the old battery on the back seat floor and had Linda start the car.  It started on the second try and she backed it out of the garage so I could get in.  The hybrid battery was depleted and there was a red battery symbol illuminated on the instrument panel that we had never seen before so we got the Owner’s Manual out and looked it up.  It either meant that the 12V battery was not charging or that the hybrid battery was drained below some threshold, or possibly both.  We could see the charge level coming up on the hybrid battery so we waited and the battery warning light eventually turned off.  Linda also noticed that the in-dash navigation system, having completely lost power, was requesting a security code to reactivity it.  I found the code on a sticker inside the glove box and after Linda entered it the system returned to normal operation.  When the hybrid battery charge indicator was above 50% she backed out of the driveway and we went on our errand run.

I was on Golf Club Road last night when I went to O’Reilly’s to get the new battery so I knew it was in rougher shape than usual.  We took Hacker Road south instead which kept us on pavement.  We headed back west on Grand River Avenue to O’Reilly’s to return the old battery and get the core charge refund.  We then drove back east a short way to the drive-through car wash.  Linda had not used it before and was unclear about its location.  With the car all cleaned off we headed west again to Teeko’s Coffee and Tea to order some fresh roasted coffee beans.  Jeff was there and roasted the beans while waited and enjoyed a cup of Sumatra Manhelding coffee.  We got our usual Ethiopian Yirgacheffe half-caffe blend and decided to try a Costa Rican Terrazzu half-caffe blend.

We took the long way home, going back east on Grand River Avenue and then north on Hacker.  The extra driving around gave the hybrid battery plenty of time to recharge and cycle up and down and kept our just-cleaned car mostly on paved roads.

Back at the house I backed my car up to the large garage door and unloaded everything inside in preparation for my 10 AM service appointment tomorrow at Brighton Honda.  While I did that Linda unloaded a few more things from the bus.  We had quite a few rocks on the concrete driveway, as a result of Kerry Fear plowing snow this past winter, so I swept them off with a push broom.  We also had 6″ high ‘curbs’ at our three driveway entrances as a result of recent road grading, so I graded them out using a metal toothed rake.

By the time we finished those tasks we were ready to be done with physical work for the day.  Linda decided to spend an hour or so studying the item pool for the ham radio Amateur Extra class license exam.  I gathered up the laundry, took it to the laundry room, sorted it, and started a load.  I then joined her on the back deck to work on blog posts for a while.  By 4:30 PM it was a little chilly and we went inside.  I took up my usual spot on one of the living room sofas and almost immediately Juniper (our female cat) was in my lap.

For dinner Linda made a nice salad with arugula, Italian kale, strawberries, and slivered almonds.  The main course was pan-seared tofu with caramelized onions and barbecue sauce, served with a side of corn kernels.  Yum.  After dinner Linda wanted to go for a walk so we patrolled our street from one end to the other, which took about an hour.

Wednesday night is usually PBS night for TV but neither of us were in a TV watching mood.  I went to my office for a while, checked in to RVillage, and changed our location.  I then went to the WiFi Ranger website, downloaded some manuals, and opened a support ticket.  Back upstairs I texted Joe Cannarozzi, our mobile mechanic, to arrange a time to call him and discuss brake work.  I then called Mike (W8XH) to catch up on ham radio and SLAARC stuff and check on borrowing his trailer to transport our non-functional Cub Cadet Lawn tractor to Sloan’s for repair.  By the time I wrapped up my conversation with Mike, Linda had gone to bed and was watching a program on PBS about a previous live broadcast from the Monterey Bay Marine Sanctuary called The Best of Big Blue Live.  Linda fell asleep but I stayed up long enough to watch a rerun of Two and a Half Men and the first half hour of The Late Show with Stephen Colbert while working on this post.  With the stroke of midnight came sleep.

 

2016/01/26-31 (T-N) Coming Off The Road

Leave a reply

2016/01/26 (T) Filter Me This

The low temperature overnight was forecast to be 50 degrees F.  That’s good sleeping weather for us, so we left several windows open and did not need the furnace and I did not turn on the heater pad on the bed.

As I have written the last couple of days I have not been feeling quite right.  This morning I had a productive cough.  That is never a good thing but it is better than having stuff in my lungs that won’t come out.  I was feeling better today so perhaps I am finally kicking out whatever it is that got hold of me.

I made our morning coffee and used up the last of the current batch of coffee beans.  We have used six pounds of coffee in the last 60 days; a pound every 10 days on average.  We left home with eight pounds of coffee from Teeko’s; two pounds each of four different beans/blends packaged in 1/2 pound vacuum sealed bags.  I blend pairs of beans in equal proportion when I grind them to make our daily half-caffe morning coffee.  We have four 1/2 pound bags left, which will carry us for about 20 more days at our current rate of consumption.  We have been vacillating about whether to order more beans from Teeko`s but decided today that we probably should, and do so relatively soon.

The entrance to Gold Tree MH community in Bradenton, Florida where our friends, Ed and Betty Burns, bought a place after they came of the road as full time RVers of many years.

The entrance to Gold Tree MH community in Bradenton, Florida where our friends, Ed and Betty Burns, bought a place after they came of the road as full time RVers of many years.

Breakfast was our usual, but always scrumptious, granola and fresh blueberries with orange/grapefruit juice.  After breakfast Linda spent some time trying to get in touch with someone from the Florida Sunpass (toll road) system but was unable to ever speak to an actual human being.  We have a Sunpass transponder in our Honda Element from two years ago and have a Sunpass account to go with it.  Unfortunately, we did not record the details of that account in our password app and have been unable to access the account to see if it is still active, has a credit balance, or to add money.  Up to this point we have not needed to use the Florida toll roads, but eventually we will.  She finally got frustrated, sent an e-mail to their contact address, and then went for a walk

When she returned from her stroll, Linda busied herself with her counted crisis-stitch project.  Last night she made arrangements for us to visit SE Florida and the Florida Keys.  She zeroed in on February 9, 10, and 11 and confirmed that Mara was willing/able to take care of our cats while we were away.  After looking at various options we decided that we wanted to use Homestead, Florida as a base from which to explore the area.  One reason was that the prices for lodging in Marathon were $200+ per night and in Key West $400+ per night.  We are not late night party animals, so we did not need to spend that kind of money just to have a place we could stumble home to in the middle of the night.

 

The best price she found for a hotel was a well-rated Travel Lodge in Homestead for $109 per night but Trivago would not let her specify a non-smoking room.  The Travel Lodge website clearly showed both smoking and non-smoking rooms so we were not about to risk ending up in a smoking room.  The next best deal was for a non-smoking room in a Hampton Inn for $160 per night, which includes breakfast.  We have always liked Hampton Inns and as a bonus they did not have a reservation cancellation fee.  She booked us for the three nights.

Our plan is to leave early on the 9th and visit Everglades National Park via the Homestead entrance.  We will then check in to the Inn late in the afternoon.  On the 10th we will leave early and drive through the Keys, seeing what there is to see along the way, and eventually arriving in Key West.  We will get a taste of the Conch Republic but leave in time to get back to the Inn in Homestead at a reasonable hour.  On the 11th we might return to Everglades National Park and/explore other things in the area.  We will probably sleep in on the 12th, enjoy the complimentary breakfast (as much of it as we can eat), and then check out and head back to Arcadia.

While Linda was walking and working on her project I edited seven more blog posts.  Late morning I took a break to finish the regeneration of the water softener.  I removed the clear housing from the pre-filter housing attached to the inlet on the water softener, removed the diverter tube and flat washer, and returned them to the plastic zip lock bag I store them in.  I put the opaque blue housing back on without a filter element inside and ran water through the tank to flush out any remaining salt brine.  I tested the water coming out of softener and it was at 1.5 gpg.  That was a very discouraging result given that I just used almost 52 ounces of table salt to regenerate it.  In the 3-1/2 years we have owned this water softener I have only once successfully regenerated the softener back to zero (0) grains per gallon.  Overall it has been a disappointing purchase.

It was time to replace the sediment filter ahead of the softener and the carbon filter going into the fresh water tank but we did not bring spare cartridges with us.  I took a minute to take several pictures of the caulk that is peeling loose from our new passenger side lower windshield and attached one to a text message to Chuck Spera which resulted in a brief exchange.  I then took the car and went on an errand run.

My first stop was Walmart where I found a pair of 5 micron 10″ sediment filter cartridges, a pair of 10″ charcoal wrapped taste and odor whole house filter cartridges, two 48 ounce boxes of coarse Kosher salt for future regenerations, and a bag of animal crackers.  (I checked the label and they did not contain animal products)

My next stop was the local NAPA Auto Parts Store.  They had small tubes of silicone adhesive caulk, both black and clear, but I did not buy any at this time.  My next stop was the local Shell station where I topped up the fuel tank.  I then moved the car next door to the Dunkin Donuts and got a frozen mocha latte made with almond milk.  It was warm today and I wanted a treat.

Back at our coach I measured our windshield wipers and then e-mailed Brenda Phelan the dimensions so she can send us the correct sun covers along with the tire covers we ordered from her and Bill at the Tampa RV Supershow.  With that done I contacted Florida Grande Motor Coach Resort near Webster, Florida to see if we could take advantage of their 2-for-1 special and stay two weeks for the weekly rate.

Our current departure date from Big Tree RV Resort in Arcadia is March 7th.  Florida Grande was able to take us starting on that date for two weeks so I made the reservation.  The resort is south of Ocala and The Villages, north of Bushnell, northeast of Brooksville, northwest of Lakeland, and west of Orlando, so it is centrally situated to a part of the state where we can easily spend two weeks exploring and touching base with some friends in the area.

With Florida Grande in hand I pulled up the website for Jetty Park Beach and Campground at Port Canaveral on Cape Canaveral.  We were hoping that we could get in there when we left Florida Grande.  Our GLCC friends, Pat and Vickie Lintner, moved to Jetty Park when they left Fort Wilderness at Disney World in mid-February.  They have done this every year for at least the last six years.  I visited them there two years ago after dropping Linda at the Orlando airport, so I know it’s a nice little park in a unique location and an ideal place to explore Florida’s Space Coast.

The Jetty Park online reservation system indicated that no sites of the type we wanted (full hookup) were available starting on March 21st but said to call or e-mail the office.  I knew from my conversations with Pat and Vickie that the park campground was extremely popular with repeat visitors who book their reservations a year in advance.  They had also told me that folks occasionally cancel reservations but if I called and checked repeatedly we might be able to get in.

I got an answering machine and left my name, cell phone number, and the dates we were interested in.  I got a call back a short time later from Scott.  He was able to put us on a site for one night on March 21st at the daily rate, and a different sight for seven nights starting on the 22nd, which qualified for the weekly rate.  Sold.

Jetty Park is a bit more expensive than what we normally like to spend for camping but it is on the Atlantic Ocean between the Kennedy Spaceflight Center and Cocoa Beach.  It is also on the south shore of the channel that separates the park from the Cape Canaveral Air Force Station and the Spaceflight facility as well as and a U. S. Navy submarine base.  If you are there at the right time submarines can be viewed as they are going into or out of the base.  The Port/channel is used heavily by cruise ships, including the Disney Cruise Lines.  If the timing is right, rocket launches can also be viewed from there, up close and personal.  I was lucky enough to see a military satellite launch when I was there two years ago.  My recollection is that it was me and about 10,000 other people, not only in the park but lining the access roads for miles to the west.  I remember thinking then that it would be much better to be camped at Jetty Park Campground than fighting this traffic after the launch.  Indeed, I crashed (no pun intended) on Pat and Vickie’s sofa for 90 minutes until the traffic dissipated and then drove back to Williston Crossings.

I e-mailed Pat and Vickie to let them know we got into Jetty Park Campground and give them the dates.  We hope they will still be there for at least part of our stay but even if they have already moved on there is way more to do in the area than we can experience in one week.  I then e-mailed Ed Roelle and Bruce/Linda Whitney to update them on our travel plans.

With all of that accomplished I returned to working on our water system.  I use a sediment filter cartridge in the first housing, which I removed and replaced with the 5 micron cartridge I bought earlier at Walmart.  I then unscrewed the housing that is mounted inside the water bay.  I had to use my large slip pliers since the filter wrench could not be positioned properly to turn it far enough to loosen the housing.  The element that was in there was a specialized cartridge that I bought it in Quartzsite, Arizona this past winter.  It was more expensive than most and my recollection is that it contained some silver and had a very small micron rating.  We have a 0.5 micron drinking water filter that filters for five different things including cysts, lead, and VOCs, so a whole house carbon wrapped filter on the water input to the coach fresh water tank should be more than adequate.

We went for a walk and stopped at the activity building.  We were expecting a package from Amazon tomorrow but Pat, one of the resort managers, flagged us down to let us know it arrived today.  We picked it up from the office and carried it back to the coach.  It was 15 pounds of the Science Diet Sensitive Skin and Stomach cat food, which we could not find locally.

For dinner Linda made sautéed kale with garlic and turmeric and vegan quesadillas with Daiya cheddar cheese.  Red grapes rounded out the meal, which was simple but delicious.  We went for another walk after dinner and then settled in to watch our Tuesday evening TV shows.  All of the shows were repeats that did not require our full attention, so Linda worked on puzzles and I worked on this post.

2016/01/27 (W) Rained In

The rain started around 2 this morning and intensified through the 4 AM hour before tapering off and ending, temporarily, around 7 AM.  We awoke at 7:45 AM and realized it was Wednesday.  The weekly coffee at Big Tree Carefree RV Resort (BTCRVR) is Wednesday at 8 AM so we got dressed quickly, grabbed our complimentary coupon, and walked over.  As with the last time we went, the place was packed with no seats available as the “regulars” had all arrived at 7:30 AM.  They were out of regular coffee so we both filled our travel mugs with what was left of the decaf.  We decided not to stay for the announcements and door prize drawings and walked back to our coach.

The weather forecast was for the rain to resume late morning and continue until dinner time tomorrow so Linda decided to get a long walk in before the rain returned.  While she was out I used my computer to upload two more blog posts.  My goal is to get 5 to 7 of them uploaded each day, but after doing two I tired of the task.  I don’t feel sick, but I am still coughing stuff up occasionally and I feel a little tired, which I attribute to fighting off whatever ailment I have developed.  Jasper, our 11 year old male mackerel tabby cat, started sneezing yesterday and the sneezing became more frequent today.  He is eating and drinking, and does otherwise appear to be out of sorts, but we will have to keep an eye on him.

Mid-morning I phoned Teeko’s Coffee and Teas back home and ordered eight (8) pounds of custom roasted coffee beans, two pounds each of four different things, to be vacuum packed in 1/2 pound bags.  I ordered Ethiopian Yirgacheffe, both regular and decaffeinated, Seattle Blend (caffeinated), and Sweet Dreams, a decaffeinated blend.  When I grind the beans just before making our coffee I mix the Yirgacheffe beans 50/50 or I mix the Seattle Blend and Sweet Dreams 50/50 to make Sweet Seattle Dreams.  The Yirgacheffe is a single bean coffee, smooth and pure, whereas the Sweet Seattle Dreams is a blend of many beans and is slightly more complex in flavor.  We like both so I usually alternate between them from day to day.

We left home the day after Thanksgiving Day with eight pounds of the same assortment of beans.  At our current rate of consumption of one pound every 10 days our current supply of beans should get us to mid-February, approximately 80 days from when we left to head south for the winter.  The new beans will be shipped USPS and should be here in 7 to 10 days.

That was the last thing I did of any note for the rest of the day.  We were socked in by the weather since we chose not to walk in the rain.  Linda worked on her counted cross-stitch project and I took a nap.  I eventually got up and played games on my iPad while she took a nap.  I laid down a second time and flipped through the various local OTA TV news and weather stations but did not fall asleep.  Rainy days are good for that, especially when there isn’t anything else I feel like doing.  Eventually Linda made dinner which was a bit of work.  She made mujadara, a brown lentil and basmati rice dish with cumin, cayenne pepper, and cinnamon, topped with caramelized onions.  It was very good.

After dinner we watched the PBS Newshour, which is providing reasonably intelligent coverage of the 2016 presidential campaign and the upcoming Iowa Caucuses.  We then watched our usual Wednesday evening PBS nature and science programs.  Linda went to bed at 10 PM but I stayed up until midnight to watch Charlie Rose, which I consider to be one of the most intelligent shows on television.  I went to bed to the pitter-patter sound of rain lightly falling on the roof of our coach and drifted off to sleep.

2016/01/28 (R) Bloody Nose

The rain continued overnight into this morning and intensified between 4 and 6 AM.  I was awake off and on starting at 3 but awake to stay by 7.  We both got up at 7:30.

Jasper, our make cat, started sneezing occasionally a couple of days ago and was sneezing more frequently yesterday and into the evening.  We awoke this morning to find blood spattered on the living room floor and a couple of spots on the captain’s chair nearest to the desk.  It appeared that Jasper was probably sleeping in that chair when he had to sneeze.  We were able to clean all of the blood off of the tile and get the spots out of the chair fabric.

Before I could make our morning coffee I had to open the last four vacuum-packed bags of coffee beans and transfer them to the airtight stainless steel storage canisters.  While I did that, and then ground the beans and prepared the brewer, Linda researched sneezing and bloody noses in cats.  (She is our Google queen.)  Based on what she found, he almost certainly has an upper respiratory infection, but beyond that it’s hard to say.  He is eating and drinking, which is good, and his behavior has not changed as far as we can tell, which is also good. (He’s an 11 year old cat and normally sleeps more than he is awake.)

The rain quit by 8 AM but it was solidly overcast.  The chance of precipitation through lunch time was only 15% but jumped back up to 30% at 1 PM.  Juniper, our 7-1/2 year old female cat, seems to be just fine and climbed up in Linda’s lap where she likes to be whenever possible.  While we drank our coffee Linda used her iPad to check in on the world and play a few games, while I used mine to finish up yesterday’s blog post and start on today’s post.

I decided to call the veterinarian’s office at 9 AM and see if we needed to bring Jasper in.  They said we probably should and scheduled an appointment for 12:30 PM.

We had granola for breakfast and then got dressed.  I settled in at the desk and worked on blog posts for the rest of the morning.  The rain was forecast to continue through the day and into the evening before finally clearing out of the area by midnight.  There was a bit of a lull during the morning, during which Linda walked over to the dumpster with our small daily bag of kitchen trash and then got in a long walk before returning to our coach.  Once she got back Linda worked on her counted cross-stitch project.

We put Jasper in his carrier at 12:15 PM and drove the short distance to Desoto Veterinary Services where Dr. McNulty checked him over.  His lungs were clear and his heart was strong and normal, but his temperature was elevated slightly.  Doc gave him a shot of a multi-acting antibiotic and antibacterial nasal drops.  The drops were actually ophthalmological, but he pointed out that anything designed to work in the eyes will also work in the nasal/sinus area as that is where fluids from the eyes end up via the drainage tubes.

As long as Jasper was there Dr. McNulty scarped some tartar off of his teeth.  I had never seen this done on a cat that had not been anesthetized but Jasper tolerated it quite well.  Linda said she had seen our vet back home, Dr. Carron, do this before.  In addition to the bill for today’s services we purchased six more doses of Cheristin flea medication.  That will cover both cats for February, March, and April until we get home.  We will switch them back to Revolution as we still have quite a supply of it and it also protects against heartworm.

Before returning to the RV resort we drove to the Turner Agri-Civic Center to drop off our plastic recyclables.  By the time we got back to the coach it was starting to rain again.  Jasper was glad to be back in the coach and out of his carrier and we glad to be snug in our home-on-wheels and out of the rain.

We had a bite of lunch and I resumed editing blog posts but was struggling to maintain my concentration and interest, so I took a nap.  When I got up I checked e-mail and had a reply from Pat and Vickie Lintner.  They will be at Jetty Park Beach and Campground at least through the end of March so we will get to hang out with them while we are there.

Late afternoon I had a call from Michele Henry of Phoenix Paint.  We chat occasionally but this call was promoted by a visit to our website where she noticed that my latest blog post was from early October 2015.  She was wondering if I had stopped blogging or if we had, perhaps, stopped traveling.  The answers were ‘no’ and ‘no’, of course, but that was just an opening to a conversation, not the end of one.

For dinner Linda made tortilla wraps with BBQ pan-seared tofu and caramelized onion and served a side of corn and edamame.  I really like this way of preparing tofu but it is messy.  I have come to the conclusion that my favorite way to have it is wrapped in a soft, warm tortilla.  It’s tasty, and helps contain the mess.

After dinner we tuned in the PBS Newshour for our daily dose of presidential campaign nonsense and analysis.  We then watched our usual Thursday night CBS TV programs for a brief escape from the bizarre reality of American politics.

Ed & Betty’s place at Gold Tree MH community in Bradenton, Florida with our car in the driveway.

Ed & Betty’s place at Gold Tree MH community in Bradenton, Florida with our car in the driveway.

The rainfall over southwest Florida in the 48 hours from late Tuesday evening through late this evening has been epic, and the rainfall totals for the month of January have been historic.  Some places closer to the Gulf Coast to our west, southwest, and south received almost 13 inches of rain and most locations received 5 to 10 times their normal rainfall for the entire month.  Fortunately Arcadia, in general, and Big Tree Carefree RV Resort, in particular, seem to drain well and we did not have any issues with flooding.  Our coach continues to have leaks, however, and while that is frustrating enough by itself, they seem to appear in new places and not reappear in previous locations.

This time around the carpet runners on the entry stairs were soaking wet.  Besides the leak around the new, and newly installed, passenger side lower windshield, it appears that water has gotten under the new landing platform as the passenger side rear lower corner is water stained and wet.  My guess is that water ran down into the stepwell from there but how it got there in the first place is a mystery.  Given the problems I discovered with water under the pilot and navigator seats, my guess is that water somehow got to the landing from there, but that only begs the question of where the water gained entry and how it got that far in the first place.

2016/01/29 (N) Ed and Betty

Jasper had a difficult night, sneezing often and usually multiple times when he did.  As a result I did not get the best night’s sleep.  The weather cleared out overnight and in spite of Jasper’s difficulties I did get some rest.  I woke around 7 AM to a beautiful sunrise lighting scattered clouds to the southwest.  We had coffee, toast, and juice for breakfast, showered, and got dressed.

We pulled out of our site at 10 AM and stopped at the Resort dumpster on our way out.  We left the Resort about 10:10 and headed west on FL-70 towards Bradenton.  We stopped at the Publix supermarket in Lakewood Ranch, just east of I-75, and Linda bought flowers.  We arrived at Ed and Betty Burns’ home, just east of I-75 and south of Fl-70, around 11:15 AM.

It was great to finally see Ed and Betty again.  Since the last time we saw them they have sold their motorhome and bought a manufactured house (double wide) in a nice development in Bradenton, Florida.

For lunch Betty had baked a loaf of German Rye Bread and made a pot of vegan vegetable soup from a mix she found.  She also had grape tomatoes and orange segments.  It was an excellent lunch of good food shared with good friends and we very much appreciated her accommodating the way we eat.

After lunch we went for a walk around their gated community and I took a few pictures along the way.  We stopped at the clubhouse and pool to check it out.  Like the rest of the park they were large, excellent facilities.  Back at their house we sat outside chatting and enjoyed some hot tea.  It eventually cooled off to where we started to get cold and went inside to continue talking.  Rather than go out for dinner we decided to have dinner at Ed and Betty’s.  That led Linda and Betty to drive to the Publix supermarket about a half mile from their house to gather ingredients while Ed and I stayed home a opened a couple of bottles of wine.  We chatted into the late afternoon enjoying wine and tortilla chips with peach salsa.

Linda and Betty started preparing our evening meal at 5 PM.  We had a nice salad that included non-dairy Daiya mozzarella style “cheese.”  Slices from an Italian baguette with non-dairy spread accompanied the main dish of angel hair pasta with a slightly sweet Ragu pasta sauce.  We waited a while and then had dessert of Marie Callander’s Peach Cobbler served hot with  Almond Dream non-dairy ice cream on the side.  Once again it was a wonderful meal and we were stuffed.

We finally left at 8:30 PM and drove back to Arcadia.  We stopped to check our mailbox and were back in our coach by 9:45 PM.  An episode of Endeavour had started at 9:30 PM and we picked it up in progress.  When the episode was over at 11 PM Linda headed to bed and I tuned in Charlie Rose.

2016/01/30 (S) Blog Swimming

The temperature dropped back into the 50s last night so we had good sleeping conditions and the coach was only slightly chilly when we woke up this morning.  I ran the heating system just long enough to bring the temperature inside up to 70 degrees F and chase away the chill.  We had a beautiful day on tap with high, scattered clouds, sunshine, light winds, and temperatures climbing into the 70s.  This is why people come to Florida in the winter.

After coffee and a light breakfast of grapefruit and toast, Linda went for a walk and I settled in to work on blog posts.  She ended up at Walmart looking at swimming suits for me and called me to see what my waist size was.  I did not know, and did not want to dig out a tape measure at the moment, so I told her I would go to the store later and find something.  The swimming pool here is heated and there is also a hot tub with a whirlpool feature.  Both of them are used regularly but we had not been in them yet as the weather has been too cool and/or too wet.  I thought it was still too cool today, but Linda was determined to get in the water.

When Linda returned from her walk I took the car and drove over as I wanted to top off the fuel tank while I was out.  I had measured my waist so I had a rough idea of what size swimming suit I needed.  Walmart only had one style that I liked so I bought one, along with a new pop-up nylon mesh laundry basket.  When I got back to our coach I tried the swimming suit on.  It was huge and needed to be returned.  I wanted this swimsuit crisis dealt with now.  Linda had bought something that she wanted to return so I took both items and their receipts back to the store.

It seems that there are often long lines at Walmart Customer Service counters, but that is just a matter of timing.  I did not have to wait very long and the returns were easily accomplished.  The problem with the swimming suits at Wally World is that there are gaps in the waist sizes.  They had the same style I had previously purchased but the next smaller size looked like it would be too small.  Given how much too large the supposedly correct size one was I decided to buy it.  I did not have much in the way of options at that point.

I tried it on when I got home and it seemed to fit OK.  At my urging Linda had already gone over to the pool.  I wore a shirt with my swimsuit, put on my Crocs, and walked over to join her.  I found her in the pool hanging on to a foam swim noodle and floating around with a smile on her face to match that of any kid.  We were both good swimmers when we were kids, but that was a long time ago.  I no longer regard water that is deeper than my shoulders as a friendly place.

The pool was cool on first contact but I could tell that the temperature would be OK after I had been in for a few minutes.  I eventually got all the way in and got my exercise by walking around in water up to my neck while moving my arms back and forth through the water.  All movements under water are done against considerable resistance and provide good exercise.  When I first got there the sun was still bright and warm but eventually thin clouds started to obscure it.

When we were done in the pool we moved to the hot tub, which was quite warm, and Linda turned on the whirlpool pump, which was quite invigorating.  When we were done in the hot tub Linda rinsed off in one of the showers to get the chlorinated water out of her hair.  I had not gotten my head wet, so I did not bother rinsing off.  I had the slight shell of chlorine about me the rest of the day and evening, but it was OK; kind of like a perfume for men.

I resumed uploading blog posts until dinnertime.  For dinner Linda prepared large salads with mock cold cut slices, garbanzo beans, fresh blueberries, grape tomatoes, and Daiya shredded non-dairy cheese.  She finished up the balsamic vinaigrette and dressed my salad with an Asian soy-ginger vinaigrette.  We had a couple slices each of the Italian baguette she bought yesterday and it made for a large, tasty, and satisfying meal.

After dinner we took our iPads and smartphones to the activity building and used the Resort Wi-Fi to download and install all of our app updates.  Linda also downloadable and installed the latest update to the iPad operating system (iOS 9.0.2 I think).  Once the updates were done we walked back to our coach and watched another episode of Endeavor, which tells the story of the beginning of Endeavor Morse’ career with the Oxford, England city police department and how he became Inspector Morse.  Like most BBC dramas, it is extremely well done.  We stayed up and watched an episode of “As Time Goes By”, a delightful British comedy starring Judy Dench.  There wasn’t much else on that interested us after that and we turned in earlier than usual.  I had the lights out before 11 PM.

2016/01/31 (N) Bus Article Photos

Today was another pleasant day, weather wise, with light winds and a high temperature in the mid-70s, but more cloud cover than yesterday.  Whatever I caught a few days ago is still with me and Jasper is still sneezing, so the boys on the bus are both still a little under the weather.

I met Dave Aungier at the Arcadia Rally 2016 and photographed his 1977 MCI MC-5C bus conversion.  Dave wrote an article about his bus for Bus Conversion Magazine (long hand) and had his friend Bonnie put it into MS Word.  She e-mailed the file to Dave and to me.  Other than breaks for lunch and to go for a walk with Linda, I spent most of the day reformatting the article in two columns, doing some minor editing, and then selecting, processing, and inserting photos into the article.  I did not finish the work by dinner time and figured I would finish it tomorrow.

Linda and Betty strolling down one of the interior roads at the Gold Tree MH community.

Linda and Betty strolling down one of the interior roads at the Gold Tree MH community.  Gold Tree is a clean, well-kept, and attractive gated manuactured housing community with nice amenities.

Our friend Mara was scheduled to be at Horizon Coach tomorrow for repairs on a slide out seal and then check into our RV Resort.  Her cat, Sabra, has been ill and she decided to push everything out by a day so she can take Sabra back to the veterinarian where she is staying near Ft. Lauderdale.

Lunch was roasted red pepper hummus with onion on the dark German rye bread that Betty Burns baked for us last Friday.  Double yum.  On our first joint walk of the day we found a small group of musicians playing at the gazebo to an equally small audience.  The Petanque (p’tunk) and shuffleboard courts were also in full use and there were folks in the swimming pool.  Petanque is a form of Bocce Ball that is favored by the Resort residents from Quebec.  Linda went swimming later in the afternoon.  We had baked potatoes for dinner topped with a sauté of onions, mushrooms, broccoli, and kale.  A dollop of Tofutti vegan sour cream added a bit of creaminess.  We went for another walk after dinner and stopped by the activity building.  The library was full of folks playing dominoes and other folks were gathering for the 7 PM karaoke session.

I was done working for the day and settled in with Linda to watch Downton Abbey and whatever else might be on TV this evening.

 

2016/01/06 (W) -10 (N) Websites, Woodwork, and Wildlife

Leave a reply

2016/01/06 (W) Filtered Article 

The temperature dropped into the mid-50s last night and made for excellent sleeping conditions.  Never-the-less, Linda was up at 6:30 AM and read quietly until I got up at 8 AM.  I used the last of the current batch of coffee beans yesterday so I opened four fresh bags this morning, a half-pound each of Ethiopian Yirgacheffe (regular and decaffeinated), Seattle Blend (regular), and Sweet Dreams Blend (decaffeinated).  Teeko’s Coffee and Teas back home roasted and vacuum packed the beans for us in 1/2 pound amounts so they would stay fresh through the winter.  I made a full pot of the Ethiopian Yirgacheffe (half-caffe) and Linda prepared toast and grapefruit for breakfast.  One of the things we bought yesterday at Joshua Citrus was orange marmalade so Linda opened it and we had some on our toast.  It was not as bitter as most orange marmalades I have tried and I liked it.

Charlotte Harbor Event and Conference Center, Punta Gorda, FL.

Charlotte Harbor Event and Conference Center, Punta Gorda, FL.

Tonight was the weekly Powerball lottery drawing and the amount was approaching 400 million dollars so we agreed that we should buy a few tickets.  Since there was a possibility of rain this afternoon Linda wanted to get her walk in early so she walked to the Winn-Dixie supermarket in search of lottery tickets.  The Winn- Dixie is in a shopping plaza with other stores on the same (south) side of US-70 as the Carefree Big Tree RV Resort about 1/2 mile west towards downtown.  There is a very wide sidewalk along the south side of US-70 that is used by walkers, bicyclists, and folks in golf carts, from our resort and the much larger adult community just to our east, to get to the shopping area just west of us.  The Walmart is immediately across the street, with a stop light and crosswalk, but golf carts cannot go there as far as we know.

I’ve needed to change the water filter under the kitchen sink for a while so today I finally did.  I installed the GX1S01R GE Drinking Water Filter housing in fall 2014 to replace the Everpure unit that gave me no end of difficulty whenever I tried to change the filter cartridge.  It turned out that neither of our two filter wrenches fit the housing and I had to get my large slip pliers out to get it off.  The inside of the housing was dirty so I boiled some water in the microwave, added a small amount of dish soap, cleaned it thoroughly, and rinsed it out.

The GE drinking water filter element is a Class I media (0.5 – 1.0 micron) that reduces or removes more things than most filters, including:  MTBE, VOCs, Chlorine (taste and odor), Lead, Cysts, Mercury, Turbidity, and Asbestos.  The capacity of the element is listed as 500 gallons* (*depending on water conditions) and the useful life is listed as 6 months.  The filter feeds a special drinking water faucet in the kitchen sink that is only used for cleaning food and cooking so I doubt that we run anywhere near 500 gallons of water through it in 6 months, or even in a year.  Given how we use our motorcoach, and the cost of the filter elements, I will probably change the filter once a year.  To that end I wrote the date on a piece of Frog Tape and attached it to the housing.

I continued to focus on my article for BCM about Ronnie and Diann Mewbourns’ 1969 Model 07 Eagle bus conversion.  I thought I might get it done by lunch but I did not get back to work on it until after 11 AM.  I worked on it most of the rest of the day and into the evening and still did not get it finished.  By 9 PM I had the photos selected and processed but deferred integrating them into the article until tomorrow.  I will then upload it to our Dropbox and e-mail Diann that it is available for review.

Lunch was left over black-eyed peas, fresh fruit, and hummus with sourdough pretzels for dipping.  Dinner was salad and pan-seared tofu with caramelized onions in BBQ sauce with fresh strawberries for dessert.  We went for walks after both meals and Linda got in 10 miles today.

If we watch TV at all on Wednesday evening it is usually PBS and so it was tonight.  Nature was on cross-species animal bonding, Nova was on an archeological investigation of WWI trenches and tunnels, followed by a two hour program on the CERN LHC (Large Hadron Collider) and the search for the Higgs bozon particle and other, possibly more elementary ones.  It was after midnight by the time I got bed.

2016/01/07 (R) Jam Session

We were both awake around 7 AM.  Linda read for a while and got up around 7:45.  I drifted back to a light sleep and finally got up at 8:15.  By the time the coffee was ready to drink it was 8:45 AM.  Linda washed off some blueberries and poured our cups of Joe.

Linda bought 10 tickets yesterday for the Powerball lottery.  Our $20 investment returned $4.  The good news was that no one won and Saturday’s drawing will likely approach $700 million.  I know the odds of winning are astronomically small, but any non-zero chance to win even a piece of that pot seems worth another $20.  After all, you can’t win if you don’t play.

Linda by the signposts at the Charlotte Harbor Sheraton Four Points Hotel, Punta Gorda, FL.

Linda by the signposts at the Charlotte Harbor Sheraton Four Points Hotel, Punta Gorda, FL.

We had granola with fresh berries for breakfast.  I then e-mailed the Geeks on Tour to see if we could arrange a meetup.  That’s the name of Jim and Chris Guld’s business and they are currently just up the road at the Thousand Trails Preserve (RV park) in Zolfo Springs.  They are full-time RVers who do seminars and in-depth training classes on a wide range of technologies at RV rallies, parks, and other venues.  You can find them here:  http://www.geeksontour.com.  They also do a weekly podcast and have an extensive catalog of video tutorials.

I spent the morning and early afternoon finishing my BCM article on Ronnie and Diann Mewbourn’s 1969 Model 07 Eagle bus conversion.  I uploaded it to a folder in our Dropbox for them e-mailed them the link and some instructions.  I also sent the link to BCM publisher Gary Hatt.

We had hummus with sourdough pretzel nibblers and fresh fruit for lunch around 1 PM.  Our plan for the afternoon was to go watch a practice session of the Royal Lipizzan Stallions.  The U.S.-based stallions’ facility is just up the road in Myakka City and they have practice sessions open to the public at 3 PM on Thursdays and Fridays, and 10 AM on Saturdays.  They ask (charge) a $5 donation per person.  The facility has bleachers but you can bring your own chair.  We had planned to go today because the forecast for this afternoon was pleasant.

We want to order some fresh citrus fruit from Joshua Citrus here in Arcadia and have it shipped to our children in Michigan.  It will be much more economical for us to have it shipped to one place and Meghan agreed to receive it and distribute it.  We were going to stop there on our way to see the Lipizzaners but at 1:15 PM it was still overcast.  I wanted to take photographs so we decided not to go and will visit the facility another time.

With the change in our plans we took a long walk around the resort.  I then had to figure out something else to do.  I was tired and decided to take a nap.  The sofa was not available as Linda was working on her counted cross-stitch project so I curled up on the bed next to Jasper (the cat) and dozed for a couple of hours.

For dinner Linda fixed a side of mixed grains, steamed some broccoli, and sautéed a package of Gardein Orange “Chicken.”  The orange chicken is a soy-based dish and it is very tasty.

After dinner we turned on the TV and I worked on the bonus content photographs for my article on the recent Arcadia converted bus rally.  Perhaps because of the distraction from the boob tube, was trying to clean up a slightly complicated situation I had created for myself, was just not in the humor, or some combination of the three, I found the work a bit tedious.  I stuck with it long enough to get it better organized and then stopped at a somewhat logical point and watched TV.

2016/01/08 (F) Touring Geeks

There was rain in the forecast for overnight and I heard the first few drops before I went to bed just before midnight.  The rains came in earnest sometime between 4 and 5 AM and it rained hard around 7 AM.  I was awake at that point and decided to get up and check for leaks.  Fortunately there was no sign of the leaks we had during the last rain event.  I fed the cats, plugged in the charger for our Verizon Mi-Fi, and made the coffee.

Bruce by the signposts at the Charlotte Harbor Sheraton Four Points Hotel, Punta Gorda, FL.

Bruce by the signposts at the Charlotte Harbor Sheraton Four Points Hotel, Punta Gorda, FL.

After checking the user manual we determined that it is OK for the Mi-Fi to be plugged in and charging while it is turned on and operating.  The issue with the device is that it really wants to be unplugged from the charger once the battery is fully charged and can overheat if left connected.  Since we do not have a usable RV park Wi-Fi signal at our site it simplifies our online life if we can just leave the Mi-Fi on with the Wi-Fi Ranger connected to it.  The Mi-Fi battery is very slow to charge, especially when the device is turned on, but it eventually reaches full charge.  The battery will not even operate the device for 12 hours but it will operate long enough to get through the night.  What I am still trying to figure out is when to plug it in during the evening so that it is fully charged just before we go to bed.  That is a trial and process.  Once I have it figured out I need to make a habit of plugging it in when I get up in the morning and again at the right time during the evening.

After a little more discussion I e-mailed Jim Guld to confirm plans for a visit and dinner this afternoon.  We settled in with our coffee and iPads for a while and finally had breakfast at 9 AM.  Linda had two frozen toaster waffles she wanted to use up so we had those with peanut butter.  I also add a little apricot preserves on mine.  We split one of the Ruby Red grapefruits we bought at Joshua Citrus the other day.  Yum.

With company coming later today we took showers.   While Linda was getting her shower I copied recent photos from the Sony SLT- a99v to my ASUS laptop.  An updated version of the Play Memories Home software was available, so I downloaded and installed it.  After I showered, shaved, and got dressed Linda cut my hair.  We then cleaned the coach, putting away things that did not need to be out and sweeping/mopping the floor.

With the cleaning of ourselves and the coach completed, we went on an errand run.  After dropping off a small bag of trash our first stop was the Winn-Dixie supermarket.  We then drove to the Turner Agri-Civic Center to drop off recyclable plastic.  We swung by El Pirata Mexican restaurant to check out the menu and then drove to Joshua Citrus Company.  While I picked out some Sugarbelle oranges and Ruby Red grapefruit Linda ordered a three tray box of mixed citrus fruit that included Honeybelle tangelos, Meyer lemons, Navel oranges, and Ruby Red grapefruit.  The box will be shipped to our daughter and she will divide up the fruit with our son.  That arrangement allowed us to send more fruit at a lower cost than shipping to two addresses.  Our final stop was at Walmart for a few food items we did not find at Winn-Dixie.

Back at our coach I spent some time updating the Participants Database for our FMCA Freethinkers chapter (FTH) website.  I also spent some more time trying to recall just how I set up the WP-Members plugin for the SLAARC website so I can recreate it for the FTH website.  I was not able to do that in the time I had available and I think that might be due, in part, to changes that have been made in newer versions of the plugin.  I set up a WordPress User for Linda using the WP-Members registration form and it did not work the way I remembered it in the SLAARC website.  Apparently I am going to have study the user manual in detail.

Christine Guld called at 2:30 PM to let me know that she and Jim were on their way to our resort.  They arrived around 3 PM and we quickly settled into an easy conversation covering a wide range of topics.  Jim and Chris are the “Geeks on Tour” and do technology training (edutainment) at RV rallies and other venues.  They have seen and done a lot of things and are interesting, fun folks with whom to share time.

At 4:30 PM Jim drove us to dinner at Magnolia Seafood and Grill in downtown Arcadia.  The restaurant was almost empty when we arrived and we got a nice corner table by the front picture windows.  Today was Jim’s birthday and we enjoyed sharing it with him and Chris.  We lingered over dinner for almost two hours and by the time we left people were waiting in the lobby for a table.  I don’t like to wait for tables, but it’s usually a good sign when a restaurant is that popular.  Everyone said their meal was excellent.  Jim drove us back to our coach and dropped us off.  There was a music jam back at the Thousand Trails Peace River Preserve in Zolfo Springs starting at 7 PM. They wanted to cap off their evening there and we certainly understood.

We walked over to the resort office and picked up our mail.  My driver license renewal paperwork was there but nothing else.  Back at our coach we turned on the TV.  PBS/Create was airing the Las Vegas BeeGees concert from 20 years ago (again). With that as background we doodled on our iPads and eventually went to bed.

2016/01/09 (S) FTH Website Work

Our plan for today was once again to go watch the Royal Lipizzan Stallions practice session at their facility in Myakka City.  Fog moved in last night and was still thick by the time we finished breakfast at 9 AM.  That was when we needed to leave in order to get there and set up our chairs in time for the start of the session at 10 AM.  For the second time this week we decided to defer this event to a future date with better weather.

Black Crested Night Heron at the Peace River Wildlife Center, south of Punta Gorda, FL.

Black Crested Night Heron at the Peace River Wildlife Center, south of Punta Gorda, FL.

Linda resumed work on her counted cross-stitch project and I worked for a while on photos for the BCM article on the Arcadia Rally 2016.  No one won the Powerball lottery on Wednesday and by this morning the top prize had exceeded 800 million dollars, an all-time record for any lottery in the U. S.  Linda needed a few grocery items for our dinner and we wanted to buy a few more lottery tickets so we walked to the local Winn-Dixie supermarket to take care of those errands.  It was approximately a one mile round trip and on the walk back the cloud cover broke up into partly sunny skies.  Back at the coach we opened all three roof vents, turned on the exhaust fans, and opened the windows wider.

Linda settled back into her counted cross-stitch project and I turned my attention to our FMCA Freethinkers website.  I checked the SLAARC website (WordPress) to see how I set up the quick registration page through the WP-Members plug-in and then set up a similar (hidden) page for the FTH website.  I cleaned up a lot of other things on the website as well, including the member directory.  This work occupied the rest of the afternoon except for a lunch break and a brief walk.

Lunch was grilled “cheese” (non-dairy) and tomato sandwiches–very messy but very good–with grapes and orange slices.  The walk was brief because we stopped to visit with a couple from Ithaca, Michigan.  While we were chatting we watched low, thick white clouds moving towards us from the southwest against a dense, dark gray sky.  A couple of drops of rain was our early warning to return to the coach.

We got back before the rain started but once it did we closed the roof vents and reduced the window openings.  The forecast a few hours earlier had a chance of a thunderstorm at 9:15 PM but by 2 PM it was raining hard and an old leak around the bedroom exhaust vent/fan reappeared.  I also found a small leak at the lower outside corner of the new lower passenger side windshield.  We were both pretty discouraged at these continued leaks having hired people to fix them.  The heavy rain continued off and on for hours prompting Linda to track it in her iPad and eventually turn on the TV.  Lee County, which includes Fort Meyers about 45 miles due south of us, was under a tornado warning.  Arcadia is in Desoto County, which is the next one north, but the weather here was not severe, just wet.

While Linda was preparing dinner I e-mailed the members of our FMCA Freethinkers chapter to let them know that the public portions of the chapter website were now open for viewing and that I would be e-mailing each of them a unique username and password for the Members Only area in the near future.

For dinner Linda made a quinoa dish with julienned carrots, diced green onions, grated ginger, edamame, diced cucumber, and diced bell pepper.  She served it at room temperature and it was another fabulous dish.

After dinner Linda put on the Bengals-Steelers NFL playoff game while I started generating the usernames and passwords for the Freethinkers website.  I finished that work in about 90 minutes with the process of creating users automatically sending an e-mail to each member with their login information.  With that done I settled on the sofa with my iPad to finish up blog posts while we continued to track the weather.  The frontal system responsible for the wet/severe weather stretched from out in the Gulf of Mexico ENE across the Florida peninsula and was drifting to the east as storm cells raced along it.  Fort Meyers got 3″ of rain and sustained some wind damage from a rare January tornado.  The system was due to pass over Naples between 9 and 9:30 PM.  Our friends, Barb and Chuck, are there so hopefully they will just get rain like we did.

We did not have any more rain after dinner so we opened the roof vents and turned the exhaust fans on.  The forecast for Arcadia kept changing through the evening with the probability of rain around midnight bouncing up and down.  By the time we went to bed it looked like we might be done with precipitation for the night.

2016/01/10 (N) Wood Art

We made it through the night without any further rain or threatening storms and got up around 7:30 AM this morning.  We got dressed right away but I did not make coffee.  Our main objective for today was a visit to the Florida Winter National Wood Art Expo and Competition (FWNWAEC) in Punta Gorda.  We gathered up raincoats, camera gear, and a list of addresses for places we might visit, and headed out around 8:15 AM.  We stopped at the Dunkin’ Donuts in Arcadia for coffee and bagels and then continued west into downtown where we picked up US-17 and headed south to Punta Gorda.

The island at the Venice Rookery, Venice, FL.

The island at the Venice Rookery, Venice, FL.

We had a pleasant drive down and arrived at the Charlotte Harbor Event and Conference Center in Punta Gorda just after 9 AM.  The FWNWAEC opened at 9 AM so our timing was good.  The parking lot was mostly empty so I got a spot near the building and we finished our coffee before going inside.  Admission was $7 each and we got wristbands that allowed us to come and go all day if we wanted to.

We spent a couple of hours looking at all of the wood carvings on display and I photographed a few of them.  There were also lots of vendors selling tools, materials, supplies, and finished products.  At one of those tables we met John, who heads the woodcarving group at our RV resort, and learned that there will be woodcarving classes at the Turner Center February 8-11 and another exhibition there on February 20.  He invited us to stop by when the woodcarving group meets at the resort on Thursday mornings.

By 11 AM we had seen everything we wanted to see.  On our way out of the building the ladies at the entrance table were explaining to someone else some of the other things to do nearby and I heard mention of a Farmers Market.  I asked about its location and got directions.  Before leaving the event center area we walked the grounds around the Convention Center and Tiki Bar that is part of the Sheraton Four Points hotel next door.  We then headed south on Retta Esplanade through a nice area of wonderful homes on our left and waterfront parklands on our right.  There was a very large craft fair in progress but we passed it by in favor of finding the Farmers Market.

The market was inland a few blocks and was located in a smaller, but lovely, park where the vendor canopies were spread out along a winding pathway that led to a historic house which was open for visitors.  There was also a group of about eight musicians with guitars, fiddles, and such.  Linda bought a large Miatake mushroom after we sampled some and decided it was one of the best mushrooms we had ever tasted.  We found another vendor selling turmeric in root form.  She said it would keep for months so Linda bought a large piece.  At another vendor she bought sesame seeds and flax seeds, so the market turned out to be a good stop.

From the market we continued south in search of the Peace River Wildlife Center.  It was a small, private facility but had quite a collection of animals, mostly birds, that were being rehabilitated (if possible) for release back into the wild or living out their lives’ (if release was not possible).  A small donation was requested on entrance and willingly paid.  Most of the birds were in enclosures that made them difficult to photograph but the pelican area was open, and wild birds came and went, so I was able to get a few photos there.

From the Wildlife Center we drove back north into downtown Punta Gorda and the headed northwest on the Tamiami Trail across Charlotte Harbor towards Port Charlotte.  Our destination was the Earth Origins market in Port Charlotte which was, conveniently, located on the east side of the Tamiami Trail.  I say conveniently because the Trail was basically a 20 mile long strip mall.  It was six lanes divided plus left and right turn lanes, and choked with cars, so having the store on the side of the road we were already on was definitely convenient.

We were done with our shopping by 2:30 PM and realized that we were only 36 miles from Steve and Karen Limkemanns’ place in Nokomis (near Venice).  We called and got Karen on the phone.  Steve was out riding his bike but was due back soon.  They had no plans for the rest of the day so we headed their way.  We had been to their mobile home park (Bay Lake Estates) two years ago but had not been there since they bought their own place this past March.  It took about 45 minutes to get there, by which time Steve had returned from his bike ride.  We got a tour of their new place, which was one of the newer units in the complex and very nice.  We also walked up to see a unit that had caught fire and completely burned.  It was stunning to see how little of it was left.  The unit next door did not burn but the vinyl siding facing the fire melted and sagged.  Most RVs are built much the same way as mobile homes and park model trailers and they do not do well in fire situations.

Before going to dinner we decided to drive to the Venice Rookery.  We saw a sign for it driving up and wondered just what it was.  It turned out to be a large pond with an island that was a favorite resting and nesting area for egrets, herons, Anhingas, and other birds.  The island provide natural protection from land-based predators and locals told us that a large alligator protected them from any threat that might try to swim across.  I took what photos I could but had not planned on doing wildlife photography and did not have the correct lens(es) with me.

The temperature had been moderate during the day and our shorts had been appropriate clothing.  The best time to view the birds is apparently at sunset when large numbers of them return to the rookery.  As the sun sank towards the tree tops it got decidedly chilly and we finally had to call it a day.  We will be back on the 18th to see The Capitol Steps at the Venice Theater and made plans to return to the rookery with appropriate clothing and photo equipment.

From the Rookery we drove directly to Cafe Evergreen for dinner, an organic restaurant not far from Steve and Karen’s winter home.  The Café is not specifically vegan but always has some nice vegan selections.  Linda and I both had roasted beet Reuben sandwiches.  She had an edamame salad as a side and I had baked sweet potato “fries.”  We both had lots of decaffeinated coffee but no dessert as we were quite full by the time we finished our meals.

We went back to Steve and Karen’s place and visited a while longer before finally leaving a little before 8 PM.  Linda wanted to see Downton Abbey at 9 PM and we figured we had an hour drive to get back to our RV park in Arcadia.  The GPS wanted to take us south on I-75 but we went north 10 miles and took FL-70 due east through Myakka River State Park.  About half way to Arcadia we encountered an accident scene and had to wait for 15 minutes before we could continue our trip.  We got home a few minutes after 9 PM so we were still able to watch the show.  The Abominable Bride episode of Sherlock was rebroadcast following Downton Abbey so we watched it again.

The weather had cleared out behind the strong cold front that pushed through the area yesterday and temperatures overnight were forecast to drop into the upper 40’s.  We closed down all the windows before we went to bed.  I turned on the electric heater pad on my side of the bed before climbing in.  It had been a long day and neither of us felt like reading or writing so I turned off the lights and we went to sleep.

 

2015/11/23 (M) Elemental Errand Run

Leave a reply

I got up a little after 7 AM.  Juniper was prowling around the bed which is her way of letting us know she wants to be fed.  If one of us does not get up and put food in their dishes Juniper starts chewing on the charger cords on our night stands and/or pushing things off onto the floor.  I needed to get up anyway.  The Tylenol PM had worn off and I was having difficulty finding a comfortable position.  To my surprise and consternation, my back was much worse than when I went to bed.  I could not find a comfortable standing position and was barely able to walk.  I managed to get my robe and slippers on and make it to the bathroom to get my bite guard out, clean it, and put it back in its case.  I made my way to the kitchen where I took three Ibuprofen with some orange juice and had a couple of cherry strudel bites (vegan).  I then sat in the living room with the heater pad against my lower right back and set on high.

Linda got up at 8:15 AM.  At 9 we had fresh grapefruit and cherry mini-strudels (vegan) for breakfast with orange juice and the last of the Ethiopian Yiracheffe coffee.  We drank most of the coffee in the living room where I lingered until 10 with the heater pad on my right lower back.

I called Brighton Honda and the service department confirmed that they rotated my tires at my last service visit so they did not need to be rotated today.  I called Discount Tire in Howell and cancelled my 10 appointment.  That took some pressure off of our morning.

A clean bus is a happy bus, or at least makes for a happy bus owner.  Although we have kept it vacuumed as we worked it needed a good interior cleaning.  The insides of the cabinets needed to be vacuumed, the wood work need to be dusted, and the counters and mirrors needed to be cleaned.  Linda did most of that yesterday.  We also wanted to wash the floor but decided to do that after everything was loaded on board.

I did not get all of the tool boxes repacked last night so I continued working on that today as best I could.  I also needed to go through all of the tubs that we keep in the front bay, decide what really needed to travel with us, and repack the tubs.  The situation with my back, however, made for slow and uncomfortable work.

We took a break at 12:30 PM to have lunch.  Linda has been using up frozen food to clear out the refrigerator so she made vegan “hamburgers.”  The packing and loading work was further interrupted by several things we had to do away from the house and bus.

I dropped off my Honda Element at Brighton Honda for a 1:30 PM oil change appointment.  Linda followed me in her car and picked me up.  We went to Staples in Brighton and bought a pack of 9x12x4 inch boxes.  I needed three of them to hold the complete sets of BCM issues (37 magazines each) that will be given away as door prizes at the Arcadia Bus Rally.  I called Teeko’s to see if our coffee order was ready to pick up.  It was.  I called Brighton Ford’s NAPA parts department to see if the air filter had arrived.  It had, but the parts guy wasn’t sure where it was and thought it might take a little while to find.  No problem.

We drove to Teeko’s first to pick up our coffee and visited for a while with Mary.  We then drove to Brighton Ford, which is next door to Brighton Honda, to pick up the air filter.  The Honda dealership called to let me know my car was ready to pick up, so the timing was really good.  Linda dropped me off at the Honda dealer and went on to Meijer’s.  I got my car and headed home.  In total the errand run took about two hours.

There was a USPS Priority Mail package waiting for me on the porch when I got home.    It was a set of the BCM issues I need to make a complete set to use as a door prize at the Arcadia Bus Rally at the end of December.  In my correspondence with Gary (owner/publisher) he agreed to send three sets and to ship them next week to the RV resort in Williston, Florida.  Sometimes I wonder why I bother spending time and effort communicating carefully and in detail.

I continued working in the garage and Linda started cleaning the house.  We worked until 6 PM and called it a day.  We did not accomplish as much today as we wanted to but we got a lot done and felt good about that.  Our original plan was to have the bus loaded by the end of the day tomorrow.  As things stand we plan to finish loading it on Wednesday.  As of now we are still committed to leaving Friday morning and should be able to do that.

Linda picked up a couple of Amy’s frozen enchilada dinners which, along with some fresh black grapes, made for an easy but tasty meal.  After dinner I integrated the magazines I received today with the issues I already had to make one compete set which I boxed up and labeled.  At 8 PM we settled in to watch our Monday night TV shows before taking some more Tylenol PM and going to bed.

 

2015/11/20 (F) The End of Projects (for now)

Leave a reply

Linda was up at 5:45 AM again and off to the bakery at 6:15 but this was the last time until spring 2016.  There is still more to do on both the software project and year-end accounting but she will do it remotely.  We need the weekend and the first three days of next week to get the motorcoach, the house, and us ready to travel and prepare for our Thanksgiving Day family gathering.  Also, unlike the last two winters, Linda does not plan to fly home in late February to take care of year-end accounting and tax work.  She will handle all of that from Florida instead, so she has to make sure she has everything she needs with her in the bus when we leave.

This was likewise the last day for me to work on bus projects.  The things I needed to do in the bus included:

  • Install metal edging to protect exposed tile edges.
  • Grease the steering column.
  • Install filter material over the HVAC holes under the bed.
  • Mount the West Mountain Radio RigRunner on the dashboard.
  • Pull the chassis battery tray out and check/clean/tighten the connections.

But I had a few other things to attend to first.

I was up and dressed at 7:45 and had an alarm set on my iPad for 8 AM to remind me to pick up our coffee bean order from Teeko’s.  I had a bowl of granola for breakfast and then called Brighton Honda.  My last oil change was at 99,280 miles and I now have over 105,000 on the odometer so I made an appointment for Monday afternoon to have the oil changed.  I had a cup of tea in the living room where I spent some time with our cats.  I then went to my office and replied to an e-mail from Gary at BCM.  I called Teeko’s to make sure our coffee was ready to pick up.  Mary did not have it packaged yet but said she would have it ready in an hour.  I indicated that it would be longer than that before I got there.  I called Discount Tire in Howell to see about having the tires on the Element rotated.  They were running 2 – 3 hours so I made an appointment for Monday morning.  I called Brighton Ford/NAPA to order an air filter for the bus.

I moved the brass colored stair edging into the bus and checked the temperature.  It was 64 degrees F so I bumped the thermostats up just a bit.  I also switched the remote temperature sensors so that #1 was in the freezer (top) and #2 was in the fresh food compartment (bottom).  I removed the ham radio antenna from its magnetic mount and put it in the car.  I finally left at 11:45 AM on my errand run.

My first stop was Wendy’s where I had an order of French fries for lunch.  I then went to Lowe’s, which was just across the street, for carpet stain remover and looked at tarps while I was there but did not buy one.  I don’t think we will be able to create enough space in the garage for the lawn tractor so I want to cover it for the winter.  From there it was less than a mile east on Grand River Avenue to the car wash.  I had taken the ham radio antenna off before I left the house but the car wash knocked the magnetic mount cellular booster antenna loose.  I pulled into a parking spot, put the cellular antenna back in position, and reattached the ham radio antenna.

I backtracked that same mile and stopped at Teeko’s to pick up our coffee order.  It seemed light but Mary already had it bagged and I was anxious to move along so I did not check it.  I continued west on GRA to the Bank of America branch near The Home Depot (which I should have done after stopping at Wendy’s).  With colder temperatures coming the next few days I decided to drive to the Shell station in Brighton and top off the tank.  The sign said regular was $2.059/gallon but the pump I used was set to $1.959.  Deal.

When I got home I checked the coffee order and realized something was not right.  There were supposed to be 16 vacuum sealed 1/2 lb. bags, four each for four different coffees, for a total of eight pounds of beans, but there were only 10 bags.  Some of them were definitely much less than a half pound but I did not have a scale and so I had no way to know for sure what the total weight was.  Three bags were also unsealed and some of the beans had spilled into the larger bag.  Two of those bags were the same bean but unfortunately the third one was different so I had no way of knowing which bag, or bags, the loose beans came out of.  I dumped the loose beans into the bag that was the most open as that was the easiest one to get them in.  I closed the three unsealed bags with spring clips, put everything back in the carry bag, and drove back to the coffee shop.

I was not pleased with the situation, especially the fact that I had to make this extra trip, but I worked through my frustration while driving and was friendly and courteous while I was there.  Being upset and nasty to people never accomplishes anything good.  Roger was there in addition to Mary and once I explained what we had ordered on Monday evening from Jeff it was obvious that something got lost in translation.  They will make it right and we will pick it up late in the afternoon on Monday.

For some time now we have felt that we do not always have Jeff’s full attention when he is waiting on us.  Teeko’s has had its challenges over the last couple of years, first with road construction making access to the strip mall more difficult, and now with the opening of a Panera on the opposite corner of the intersection.  My sense is that they have struggled financially as evidenced by the fact that they never spent the money for a proper neon sign.  As a result the shop is not as visible as it should be even though it is located at a major intersection.  Jeff got married last year and they just had their first child in September.  With those added responsibilities he went back to work driving a delivery truck for PepsiCo, which has a major plant on the south central side of Howell.  His parents, Roger and Mary, have been left to run the coffee shop during the day, which I suspect is not what they intended to be doing in their retirement.  Still, they are always very pleasant to deal with and I feel for their situation.

As much as we like Panera, when we still lived in Farmington Hills we tried to patronize a series of small, independent coffee shops but they all failed in the end.  Some failed because of mis-management, but ultimately they could not compete with the Starbucks, Panera, and Einstein Brothers stores in the area.  Sadly, I suspect this will also be the fate of Teeko’s even though it is a nicer coffee shop than the Biggby’s just down the street.  And it’s too bad (for us at least) as we really enjoy being able to purchase a variety of green beans and have them roasted to order.

Back home I finally got to work on the bus around 3 PM.  I got all of the old silver colored metal stair edging from the garage and determined where each piece had been installed.  I realized that I did not have a good way to cut the new edging nor did I have the time to measure, cut, and install it before it got dark.  I really wanted/needed the exposed edges of the tile protected so I decided to reinstall the old edging.  Although it had obviously seen heavy use over the years it was still serviceable.  Of equal importance was that it was already cut to approximately the correct length and angles.  I checked that the holes on the new edging would fall in different places than holes in the old edging.  That was the case, so I held each piece in place and drilled a small pilot hole at every third hole.  I changed to a different bit to drill through the metal that secures the edge of the plywood bus floor and then screwed each strip of metal edging in place.  The new edging will cover the holes from mounting the old edging.

This was the only work I was going to get done on/in/around the coach today.  Linda had called by this point to let me know she was heading home and was going to stop at Meijer’s along the way.  As soon as she got home she started making three batches of granola.  She is going to make and freeze as many batches as she can fit in the freezer so we can enjoy this fabulous granola well into winter.

While Linda made granola I worked at my computer cleaning up old e-mail.  Dinner was vegan Pad Thai; not like the real thing, of course, but it was easy, hot, and tasty enough.  We had some small oranges for dessert.  I worked at my desk for a while after dinner deleting old e-mails.  I quit at 8 PM to watch a few TV shows and work on this post.

 

2015/11/16 (M) Tiling the Cockpit, #3

Leave a reply

Linda planned to go to the bakery today but decided yesterday to stay home and help me instead.  Based on the 10-day forecast this looks like our last decent weather day to work on the bus and we wanted/needed to make the most of it.

We had breakfast at 8 AM (granola with blueberries and a banana) and had a cup of Stash China Black tea.  I had a text message from Kristine Gullen regarding getting together with her and Jim on Saturday and replied in the affirmative.  We finished our tea by 8:30 and got to work.

I really wanted to finish tiling the cockpit of the bus, or at least as much of it as we could.  That meant cutting and fitting tiles for the stair treads and risers and the two side walls of the entry steps, gluing them in place, and then grouting all of them.  We needed to mount the table if possible and I also needed to build a new step for the platform.  That was a lot to get done in one day and even before we started I doubted that we would get it all done.

When we opened the bus we were surprised to find that the tiles on the walls of the platform had slipped all the way down to the floor tiles.  Obviously I should not have removed the spacers right after installing the tiles and should have to left them in place for any horizontal grout spaces on vertical surfaces.  Oh well, not much to do about it now.

Keith called to see if he should come and mulch the leaves one last time.  The weather the last few days had been very nice, unseasonably warm and dry.  Today was also a beautiful day but the forecast going forward was for much cooler and wetter conditions, so this was an ideal day for our last lawn mowing of the 2015 season.

We measured and cut the tiles for the face of the platform and out to the door.  At that point I evaluated what I needed to do to complete the job.  Basically, I needed to cut all of the tiles for the entry steps and walls and then install them from the bottom up.  Every piece of tile was going to be smaller than a full 16″x 16″ tile and custom cut so even though the square footage was not that much there would be more pieces than usual and it was obviously going to take quite a bit of time to get all of the pieces ready to install.  I thought we could be ready for adhesive in two hours but Linda figured it would be at least three.  It also meant working with the door open which would make it difficult to keep the interior as warm as we needed.

Phil showed up with his excavator and a dozen bales of straw.  I knew the excavator was for a different job as he did not have anything left to do at our place that required it.  He was here to finish covering the topsoil and grass seed with the straw.  We took a break to go talk to him and confirmed that he was done with the driveway and French drain projects except for the straw.  He staged the bales where he needed them but said he had to leave to dig a perk test hole at 1:30 PM and would be back mid-afternoon to finish spreading the straw around.

Linda suggested that we go ahead a grout all of the tile we had already installed.  I was more emotionally invested in completing the tile work than Linda but had to agree that this was the prudent thing to do.  Until the tile was grouted we could not reinstall the accelerator, the steering column shroud, the seat bases, and the seats, so grouting the tile was clearly a critical path item and that is what we did.  It was after noon by the time we finished so we took a break for lunch.  Phil had taken off by this time to go dig the test pit.

Lunch was grilled vegan Italian sausage on a bun with mustard and relish and black grapes on the side.  Keith finished up mowing the yard while we were enjoying a cup of Rooibos tea.  We paid him and chatted about next year.  I gave him our approximate timeframe for returning home from Florida and asked him to go ahead and start mowing next spring whether or not we were here.  We have had Keith take care of our lawn since we bought our house in the country and he has been very good about doing that when we are away and allowing us to catch up with him when we get back.

By the time we got back to work on the bus it was after 1 PM and I had to concede that we were done working on the tile until next spring except for cleaning them, which had to wait until tomorrow as the grout has to cure for 24 hours before final cleaning.  With that decision made we considered what else needed to be done and in what order.

The first order of business was painting the two front seat bases black.  We spread out painter’s plastic on the driveway and taped it down.  We set the bases there and then masked off the top portion with the swivel bearings and mounting bolt.  We wire brushed the bases to remove rust and then went over them with a sanding sponge.  I used a cleaner/degreaser and water to clean them and then gave them a coat of black rubberized undercoating paint.

The next order of business was getting all of the tools and materials that we no longer needed out of the bus to give us room to work on other things.  On Saturday I re-installed the bump out on the walnut cover for the passenger side HVAC duct.  The duct needed to have two 4″ holes drilled in it to match the holes in the metal duct, so that was the next task.  I measured very carefully and transferred the measurements to the face of the cover with equal care.  Even so, I was off slightly and had to use the sheet metal nibbler to enlarge the bottom of each hole.  At least I had a relatively straightforward way to fix this problem; I am not always so lucky.

With the holes enlarged we put the cover in place.  The 4″ round plastic registers fit through the wood into the duct but not all the way due to two tabs.  I trimmed the tabs off using the Porter-Cable oscillating saw and trimmed a little bit off of one of the outer mounting flanges to make it fit flush.  I drilled holes through the two mounting holes on each register using the #5-6 self-centering drill bit and secured them with #6-5/8″ SR screws.  We then removed the two temporary black plastic registers from the front of the built in sofa.  I trimmed the tabs off of two new brown ones and installed them using the same procedure as the first two.

In the grand scheme of things getting the cover in place and the four registers installed was a small task but it needed to be done and stood in the way of other things.  The cover has been stored on top of the two front seats, which have been lying on their backs on the kitchen floor of the bus for weeks.  We plan to re-install the seats late tomorrow afternoon.

Two more small, but critical, tasks were securing the pull-out pantry and the refrigerator.  I have assumed for quite a while that we would secure the pantry for travel with some form of sliding latch but had not thought about it in any detail.  We also needed to secure the refrigerator but I had not thought about this in any detail either.  As we pondered the pantry latch it slowly became obvious that we did not have enough wood for a strike plate to receive a pin and we did not have two unobstructed surfaces that were in the same plane, which would be required for the kind of latch I had been thinking about.

As for the refrigerator, one of our bus nut friends secured their unit by running mounting bolts (machine screws) through the floor of the cabinet above the fridge and threading them into the unused tapped holes provided for the upper door hinge (if it was reversed) .  After looking at it for a while we realized that we could attach a section of small angle to the inside of the right alcove wall with the other side just against the face of the fridge case but not over so far as to interfere with the door gasket.  My measurements indicated that a 1/2″x3/4″ angle would be just right.  It looked to me like two 12″ pieces, one by the freezer door and one by the bottom of the fresh food compartment door, would be more than adequate to keep the refrigerator from rolling out as it cannot shift sideways or twist due to the aluminum angle on the left/hinge side at the floor.

About this time Phil returned in a red pickup truck.  He finished distributing the straw and loaded three unused bales into the back of his truck.  He pulled up in the main drive and we invited him into the bus to see what we had been working on all summer.    It is always a pleasure working with Phil.  If/when we build a barn we will have him do all of the site prep and finish grading.  He will figure out the final cost for the driveway extension and French drain and send us an invoice.

Linda prepared an easy but tasty dinner consisting of a nice green salad, mixed frozen vegetables (corn, peas, and carrots) suitably reheated, and mac-n-cheese that was both dairy-free and gluten-free.  After dinner we went to Lowe’s and The Home Depot.  At Lowe’s we bought a 1/16″ thick 1/2″x 3/4″ aluminum angle and three 8 foot lengths of brass colored nose edging but did not find a latch that we liked.  At The Home Depot we bought some screws for securing the handle on the front of the pull-out pantry and a solid brass door stop to keep the pantry in place.  The door stop folds up when not in use and should work to keep the pantry closed while traveling.

Although the new Panera on the southwest corner of Grand River Avenue and Latson Road was finally open for business we stopped at Teeko’s Coffee and Tea on the northeast corner of that intersection.  Jeff was there and took our order for eight pounds of coffee beans.  We got two pounds each of Ethiopian Yirgacheffe, regular and decaffeinated, the Seattle Blend (regular), and the Sweet Dreams blend (decaffeinated).  They will roast the beans and then let them outgas for a few days before vacuum sealing them in half-pound portions.  This allows us to take them with us in the bus and keep them very fresh until we are ready to use them and to change what we are drinking more often.

We got home just after 8 PM and took our iPads downstairs to use while we watched our Monday evening CBS TV programs.  We caught the weather forecast and then headed to bed.  It looks like we will have two more days with unseasonably high temperatures near 60 degrees F but with intermittent rain and then a serious cooling trend with highs this weekend barely above freezing.  Our time for working on the bus and being in Michigan is definitely running out.

 

2015/10/05 (M) Pondering Wallpaper

Leave a reply

I woke up to stay at 7:20 AM, got up shortly thereafter, and got dressed to work.  Today was finally wallpapering day.  I fed the cats and refilled the reservoir on their recirculating water dish.  Linda was still sound asleep, and I suspected that she did not sleep well last night, so I closed the bedroom door while I ground the coffee beans so as not to disturb her.  She is still fighting off a cold and/or allergies and so am I.  I used the last of the Ethiopian Yirgacheffe beans plus a couple of scoops of the Kenya AA.  We are a day or two away from being out of coffee and will have to get some more when we go out this morning to buy wallpaper paste and tools.

Linda got up at 7:40.  Phil had not shown up yet nor called to update us on whether he would be here so we were left to guess that he was on his way to the other last minute job that he said he would probably have to take care of today and tomorrow.  The temperature at 8 AM was 55 degrees F with light fog.  It looked very wet outside but I could not tell if it had rained overnight or if it was just heavy dew.  The high was forecast to be 72, and we have the electric heaters on in the bus, so the walls should be warm enough for us to hang wallpaper today.

We left at 9:30 to go buy wallpaper paste and a few tools at Lowe’s in Howell.  We stopped at Teeko’s on the way and ordered three pounds of coffee beans.  We got one pound each of the following, roasted to order:  1) Sweet Seattle Dreams (1/2 Seattle Blend and 1/2 Sweet Dreams decaf blend); 2) Ethiopian Yirgacheffe half-caff; and 3) 1/2 Sumatra Manhelding with 1/2 Sumatra decaf.  At Lowe’s we bought a gallon jug of Roman GH-95 Wallpaper Paste for Kitchen and Bath.  It is supposed to be more suitable for high moisture environments and since we tend to use the bus with the windows open it can get humid inside.  We also got a smoothing tool, a 24″ paint shield to use for as a trimming guide, a 1/4″ nap 9″ long roller cover, and an inexpensive paint brush.  We stopped at Teeko’s on the way home and Roger had our coffee beans ready for pickup.

Back home I gathered up the tools we already had and took everything to the bus.  I got a scrap of underlayment to use as a small work surface for measuring and cutting off lengths of wallpaper.  We did not have room to set up a work surface in the bus that was big enough to roll out the wallpaper and apply paste to the back side so we decided to apply the paste to the walls using a roller and brush.

Before we got started installing the wallpaper Keith showed up around 10:45 AM to cut the grass.  I wasn’t sure he would come today due to the wet conditions, but he did not think it was wet enough to be a problem.  It’s been two weeks since the last grass cutting and it definitely needed to be mowed, at least in some places.  We also cut up and moved a couple of downed trees so he was finally able to mow the grass where they had been.

I had just finished chatting with Keith when Phil showed up around 11 AM to pick up his small excavator.  He had been at another job since 7 AM.  It was supposed to only involve “moving some stone around” so he only took his front loader to the site.  When he got there he was shown a much more extensive landscaping plan and a job site that included removing tree stumps and other digging operations.  Even with that his plan is to be back at our place on Wednesday.

My first task was to sand the primed walls.  I used the Porter-Cable palm sander, first with 120 grit sandpaper and then with 220 grit.  Linda then wiped down the walls with tack cloth while I put the sander away.  There is not a lot of room to work in the bus so we try to remove tools that we are not using.

We finished gathering our tools and materials, including two big buckets of water (one with mild soap) and spent an hour pondering the wallpaper installation.  Part of the pondering involved measuring the three wall areas that were ready for wallpaper and deciding where we would start and how we would proceed from there.  By the time we were ready to cut and paste wallpaper it was 12:30 PM so we took a break and had a sandwich and grapes for lunch.

When we unrolled the first double roll of wallpaper we noticed periodic faint horizontal “lines.”  These turned out to be slight impressions from the outside edge of the end of the roll which was very tightly wrapped in clear plastic.  We decided to cut four shorter pieces to go behind the desk and behind the sofa just in case the impressions did not smooth out and disappear.  We cut two more short pieces to continue forward under the windows on the passenger side.  We then cut longer pieces for the corner behind the desk and the wall at the kitchen end of the sofa.

The last time we hung wallpaper was 30 years ago.  It was all pre-pasted and required reverse rolling the piece to be hung, immersing it in a water tray to activate the glue, and then slowly pulling it out as it unrolled and drained.  We then slid it into position on the wall, smoothing it out and removing the air bubbles as we went, and finally trimming it.  The wallpapers we used were thinner than the stuff we have for the bus and we created seams by overlapping adjacent panels slightly and cutting through both pieces half way between the overlap.  The free edge pieces were both removed and we had perfect seams.

The wallpaper we bought for the coach is a heavier vinyl that is washable and scrubbable.  We got the paper from Delux Drapery & Shade Co. in Ann Arbor but it did not come with installation instructions other than to follow the adhesive manufacturer’s directions.  The associate at Lowe’s, however, was very helpful and told us specifically not to overlap and trim the seams the way we had years ago.  The appropriate technique for the heavier vinyl wallpapers is to butt the edges together and roll them flat.

You always reach a point in every project where there is nothing left to do but to do it.  We poured some of the paste into a paint tray (with a plastic liner for easier cleanup later).  I started on the passenger side of the bus in the corner behind the desk on the back side of the pantry.  I used the brush to cut in the corners where the wall met the adjacent woodwork and used the roller to fill in the field.  We butted the right edge of the panel into the corner along its full length and then smoothed it towards the left and top as best we could.  The wall curves in as it goes up but I got the top edge tucked and trimmed.  I made a relief cut at the bottom of the window surround on the left which allowed us to finish smoothing the bottom portion of the panel under the window and get the upper panel tucked in, where the wall meets the surround, and trim it.  I then trimmed around the window release mechanism and along the bottom of the panel.

Wallpaper tools in sofa (seat removed) and wallpaper on wall behind the sofa.

Wallpaper tools in sofa (seat removed) and wallpaper on wall behind the sofa.

The vinyl wallpaper did not trim easily even with a new, very sharp, break-off style blade.  It also did not want to stick to the wall and we ended up peeling it back in places and spreading more paste.  We had primed the walls with Zinser 1-2-3, a water-based acrylic primer, so they should not have been very absorbent.  We hung a total of eight pieces, five on the passenger side and three on the driver side, and stopped for the day.  The wall in the hallway was prepped for four additional pieces but we decided to defer those until to tomorrow.  We cleaned up all of the tools and then relaxed for a while in the living room.

Linda prepared dinner while I worked on this post.  I could not figure out from the odor what she was making but it sure smelled good.  It turned out to be a tofu scramble, a vegan interpretation of scrambled eggs, and she served it with toasted raisin bread.  Very tasty and very satisfying.  It’s the one breakfast dish that she makes that does equally well as a dinner meal.

I drove to O’Reilly’s Auto Parts to get some door edge trim/guard and stopped at the Meijer’s supermarket for tissues and laundry supplies.  The door edge trim is a plastic U-channel that I will use to cover the edge of a hole (or holes) I will cut in the passenger side HVAC duct for the Aqua-Hot heater hoses to base through into the desk bases without making any sharp turns.

We felt like being entertained and settled in to watch several TV shows.  In-between two of the shows I made popcorn, a rare treat for us but one we really enjoy.

 

2015/09/23 (W) Autumnal Equinox

Leave a reply

We were up at 8 AM, had granola for breakfast, and enjoyed our coffee in the living room by the fireplace.  I like cool mornings.

I spent some time yesterday morning, and again this morning, considering my full-frame DSLR options.  The only 50 MP “35mm” DSLR camera body on the market at this time is the Canon 5Ds/R and there is no indication that Sony plans to introduce a successor to the A99 anytime soon.  The A99 is still available, as is the vertical battery pack/grip and I am at the point where I will probably order one.  It has a 24 MP full-frame CMOS sensor, which is double the resolution of my alpha 100.  More importantly, it will accept all of my old 35mm Minolta A-mount lenses and they will work as designed.

Linda left at 9:40 AM to meet Diane at Kensington Metropark.  I gathered up the laundry, sorted it, and started the first load.  I then settled in at my desk for a while.

I e-mailed Mike (W8XH) to see if he could assist me on Saturday and/or Monday with climbing the tower to do some more antenna work.  I then e-mailed Bill Gerrie to see if he and Karen were in Michigan yet.  I pulled up the initial mockup of the October 2015 issue of Bus Conversion Magazine and proofread my article on replacing the speedometer.  Jorge had done a good job of laying it out.  I e-mailed back four minor corrections, one slightly larger one, and a general comment about the lack of space following periods.  I had an e-mail from Steve Smith (N8AR) with contact information for Yaesu Fusion technical support.

The washing machine beeped so I transferred that load to the dryer and started another one.  I noticed that it was after 11:30 AM so I cleaned the cats’ litter tray, grabbed the garbage from under the kitchen island sink, put it in the trash can, and got it to the street.  Alchin’s normally comes “around noon” but I had a feeling they had already driven by.  They were still in our subdivision, however, and stopped on the way out to empty our can.

I had another cup of coffee and updated this post.  By noon Linda had not called yet let me know she was on her way home so I headed to Lowe’s for a roll of plumber’s sandpaper.  I also picked up the paste we need to hang the new wallpaper.  On the way back to the house I stopped at Teeko’s Coffee and Tea to order some Cafe Europe half-caff blend.  Linda was home when I got back and we had a light lunch.  We have both finally taken off some of the weight we put on this past winter.  Long, hard work days with little or no lunch seem to help.

By the time we got back to work on the bus projects it was 3 PM.  It’s hard to make progress when the workday starts in the afternoon.  Today is the autumnal equinox, so it gets dark much earlier in the evening than it did in late May, June, July and even most of August.  Still, as anxious as I am to get the heat exchangers re-installed we have to deal with the wallpaper in that part of the bus first.  Linda helped me assemble the right desk base, repeating what we did yesterday with the left base.

The left pedestal base with the Aqua-Hot fan-coil heat exchanger mounted inside.

The left pedestal base with the Aqua-Hot fan-coil heat exchanger mounted inside.

We installed the metal grates on the air openings (from the inside) and then used doubled-sided tape to affix the plastic mesh to the metal grate.  We put a 1/2″ plywood spacer in the bottom and marked the locations of the mounting bracket holes and the heat exchanger.  We took the exchanger and spacer out, punched the starter holes, and drilled.  Linda cleaned the heat exchanger and used a pair of tweezers to straighten the bent radiator fins, of which there were quite a few.  We cleaned off the two copper pipe stubs that provide the inlet and outlet for the antifreeze and then attached the self-stick 3/8″ X 1/4″ dense foam weather-stripping around the front of the housing.  We mounted the exchanger to the spacer with approximately 1/8″ of the foam weather-stripping beyond the front edge of the spacer.  We put the spacer/exchanger assembly back in the base and I secured it with screws while Linda pulled it into position, compressing the weather-stripping.

Linda cleans and straightens the fins on one of the fan-coil heat exchangers.

Linda cleans and straightens the fins on one of the fan-coil heat exchangers.

I took a few photographs as we worked and took some more of the finished assemblies.  While we were working we got a call from Philip Jarrell of Precision Paving.  Phil was calling to see if we still wanted the French Drain and driveway work done.  He has been busy all summer and even more so coming into fall when folks decide they need stuff done before winter.  He had given us a quote (estimate) back in the spring but could not do the work then because the soil was way too moist.  The property has dried out nicely over the last seven weeks and he wanted to make sure he did the work yet this year if we were still interested.  I told him “yes” and he said he would call “Miss Dig” right away to get the utilities marked and then get started.

The two desk bases with the fan-coil heat exchangers installed view from above and behind.

The two desk bases with the fan-coil heat exchangers installed view from above and behind.

I think this annoyed Linda as it will be another significant expenditure, but it’s something I think needs to be done and it is not easy to get a slice of Phil’s time.  (Actually, we have done a lot of difficult work together on the bus this summer and I think she was already annoyed from working with me on the right base.)  Not taking advantage of Phil’s availability would likely mean a two-year delay in getting this work done.

This project is actually a combination of two different projects that happened to make more sense to do at the same than at separate times.  The French drain is intended to dry out the far west end of our property which has standing water in the spring and after heavy rains, and stays moist/soft for the first half of the summer.  There are a lot of trees in that area and we have lost some and are losing others.  The driveway work will give us additional parking for people visiting in their RVs and create the main approach to the location for the bus barn that I hope to eventually build.  The topsoil that Phil pulls out from the driveway will be used to fill in low spots on the west end of the property, further improving the drainage in that area.

The right desk base viewed from above/behind showing the fans mounted on the back side of the heat-exchanger.

The right desk base viewed from above/behind showing the fans mounted on the back side of the heat-exchanger.

Linda returned to stripping wallpaper in the bus while I folded the laundry and put it away.  For dinner we had a salad and more of the soup that Linda made yesterday.  After dinner Linda researched wallpaper installation while I worked at my computer and uploaded eight blog posts from the third week of July.  About the time I finished the last one Brendan called so I went upstairs and Linda put the call on speaker.  He is a couple of weeks into his position at Eastern Michigan University teaching Art History and gave us a status report on how it is going, along with news of how Madeline is doing in her new daycare program University of Michigan.

We watched Dr. Michael Greger’s 2015 nutrition research summary on Linda’s iPad.  This is an annual presentation that he does at the vegan Summerfest in Pennsylvania.  His theme this year was the top health concerns of Americans, based on a major survey that was done by one of the national survey organizations, and what nutrition research has to offer with respect to these.  As we already know, many different diseases, one common answer; whole-food, plant-based, nutrition with no animal products.  We really are what we eat, and Americans are now some of the least healthy people on the planet.  We went to sleep reaffirmed in our dietary choices.

 

2015/08/18 (T) Walking Grind

Leave a reply

We were up at 8 AM and I made a pot of Ethiopian Yirgacheffe half-caff coffee while Linda got breakfast ready.  She made a batch of granola yesterday so we had some with fresh blueberries and unsweetened soy milk.  It’s our standard breakfast, but that’s because we like it so much.  She had an e-mail from Robin at the bakery and had to deal with some issues related to the bakery’s new account, The University of Michigan Ann Arbor.  As I do most mornings I sat in the living room working on my iPad, drinking my coffee, and paying attention to our two cats.

Being Tuesday Linda had a date with Diane to walk at 10 AM and left at 9:30 for Kensington Metropark.  I continued working on my iPad for a while and enjoying my coffee.  At 10:15 AM I called the Livingston County Sheriff and reported the mailbox incident from late Friday evening /early Saturday morning.  Shelby took the call, was very nice, said she was not aware of any other mailbox reports, but would pass the info along to the Desk Sargent.  I checked my e-mail and confirmed with Harvey for Friday at 10 AM to move the old bus refrigerator.  I finally went out to work on the floor of the bus at 11 AM, by which time the outside air temperature was already in the 80’s.

I leave three of the awning style windows in the bus open a few inches so it doesn’t get too hot inside.  I opened all three roof vents, turned on their ceiling fans, and set them to exhaust air rather than draw it in.  I also left the entrance door open to allow more air to flow through the inside of the coach.  I then sanded and vacuumed until about 1 PM.  When I came back in the house I had two missed calls from Michele Henry of Phoenix Paint so I called her back.  I was on the phone with her when Linda got back from her walk.

Once I wrapped up the call with Michele we had a light lunch of hummus with pita chips and both black and red grapes.  While we were eating we were entertained by a gray squirrel who had gotten onto the bird feeder and was hanging upside down by its hind legs.  It would curl its body to bring its mouth up to the bottom of the feeder, emancipate some seed, and then uncurl to the more relaxed stretched out position and eat it.  All of this was also being watched with both interest and considerable skepticism by three crows who were hanging around on the ground under the feeder.  They grabbed seeds that the squirrel dropped but seemed very wary of it, which surprised us.  I speculated that perhaps they had never seen a squirrel behave in this way and were, therefore, understandably and appropriately cautious; crows are very smart, after all.

After lunch we took the three wallpaper sample books to the bus to look at them with the woodwork.  Before we could do that, however, we discovered a small bird trapped in the coach and had to deal with it.  I say “trapped” because it was up on the dashboard and obviously confused by the windshields as it kept trying to fly out through them.  It did not realize it could get out the same way it came in, through the open door.

The bird seemed small and I think it was an immature sparrow but I’m not sure.  It was seeking safe shelter in the space between the dashboard cover and the lower driver side windshield.  I used a broom to try to gently encourage it to fly towards the door but it was understandably suspicious of my good intentions.  I put on a pair of canvas work gloves and it allowed me to gently pick it up.  I tried to release it at the door opening and it flew into the door causing Linda to make a comment about why we use the phrase “bird-brained.”  I caught it again, got outside the bus clear of the door, and tossed it gently away from the bus.  It immediately took flight and flew off to the southwest, apparently none the worse for its ordeal.  I can only image the story it told the other birds.

I got a piece of the Armstrong Alterna Luxury Vinyl floor tile from the garage.  Many of the wallpapers that we thought would look good with the floor tile turned out to be too yellow, and most of the ones with good color tone were too dark, but we found a few that we liked.  Those tended to be lighter without a lot of pattern and a neutral, off-white color.  We are, however, far from a final choice as we do not currently have a sample of the Lambright Notion Linen upholstery fabric or the MCD night shade material and the wallpaper has to work with all of these simultaneously.

We measured the areas that need to be repapered and in the process decided that we would leave the old wallpaper on the inner wall of the hallway, at least for now.  (The paper in the bathroom, which is different from the rest of the coach, is generally in good condition and we are not currently planning on replacing it as part of this project.)  The existing wallpaper in most of the coach is a string cloth with a beige base but distinct vertical threads that contain a noticeable amount of grey and a more subtle herringbone pattern.  It looks good with the walnut woodwork and worked well with the old white carpet, black ceramic floor tile, and bone leather upholstery, so we think it will continue to look good with the new floor tile.

If Josh is at his shop tomorrow we will try to stop and pick up the Lambright Notion Linen sample as whatever wallpaper we choose has to work well with the furniture fabric.  On Thursday we will revisit the papers in the three books we currently have with an eye towards something that has some grey in it.

It was another warm, humid day and I was done sanding so I closed up the roof vents, locked up the coach, and went inside.  Linda prepared a pizza using the gluten-free crust recipe she got from Mara.  Yum.

After dinner I went to Lowe’s and bought two bags of TEC Skill Set Universal Floor Patch and Skim Coat, a mixing bucket, two bags of tile spacers, and three 4’x8′ sheets of 1/4″ SurePly underlayment.  I meant to buy a folding metal sawhorse but left it somewhere in the store.  I was going to buy premixed floor leveling compound but they only had 1-quart containers for $10 each and the directions said it would only cover 1.5 square feet.  I have about 80 square feet of floor to patch and level, so that clearly was not a good solution.

The Universal Floor Patch is a powder that has to be mixed with water, but each bag will cover 20 – 25 square feet at 1/8″ thickness and costs $13; much better than the premixed stuff.  I have a few areas to patch that are deeper than 1/8″ but the material can be applied up to 1/2″ thick per coat, and most of the area just needs a much thinner skimcoat.  It can also be sanded within 24 hours which will allow me to make it very smooth and keep the work moving along.  My goal is to have the floor leveled and sanded smooth by bedtime on Saturday so I can install the 1/4″ underlayment on Sunday and start laying tile on Monday or Tuesday next week.

I stopped at Teeko’s Coffee and Teas to get some more of the Cafe Europe half-caff blend.  They had the regular blend but not the decaf blend so I had Roger use the Columbian decaf instead.  He roasted the beans for me while I waited and Jeff showed up along with his wife as I was leaving.  They were married last September and are expecting their first child late next month.  Jeff was wearing his Pepsi delivery shirt, confirming what the woman at the Kahuna Coffee Shop told us last Friday.

We turned in early as we will be getting up very early tomorrow to drive to Indiana again.  Linda watched an episode of NCIS after which I watched a PBS special on the origins and evolution of the Navy Seals.

 

2015/08/14 (F) Back-to-the-Bricks (Again)

Leave a reply

I was up late last night and thought I would sleep in this morning but the alarm on Linda’s iPad had other ideas and woke me up at 7:15 AM.  I got dressed and while Linda was getting ready I started downloading an update for Photoshop CC 2015 on my ASUS laptop.  These Adobe downloads are very large and very slow so I left it to run.

We did not have breakfast or coffee at home.  Linda made PB&J sandwiches and packed a bag of pretzel crackers, some fresh fruit, and some water in a cooler bag with some freezer packs.  The forecast was for very warm, very humid conditions so we closed up the house and turned on the air-conditioning.  We loaded the camera, raincoats, hats, folding camp chairs, an iPad, and some GLCC T-shirts and flags into the car and left around 8 AM for the GLCC/CCO Back-to-the-Bricks rally at the Fireman’s Park in Clio, Michigan.

We took Hacker Road to M-59 east to Old US-23 and stopped at the Kahuna Coffee shop.  We had seen the sign for this place but had never been there.  The owner was there and she was very nice.  She has a smaller version of the JavaMaster hot air coffee bean roaster that Jeff has at Teeko’s.  Her selection of green beans, however, was very different from Teeko’s with lots of flavored beans but none of the ones we usually buy.  Knowing that she gets her beans from the same place as Jeff, however, means we could probably order the ones we like if Teeko’s disappears.  She is friends with Jeff and is well aware of the probable impact of the Panera opening up across the intersection from Teeko’s.  But I digress.

This morning we were interested in coffee and bagels to go.  Kahuna had a better selection of bagels than Teeko’s but we got our usual choices; “everything” for Linda and cinnamon raisin for me, toasted with nothing on them.  They had Swiss Chocolate Almond coffee brewed so we tasted a sample.  It was very smooth, with no bitterness and just a hint of the named flavors, so we got two large ones to go.

We got back on M-59 eastbound and 100 yards later took the entrance ramp to northbound US-23.  US-23 merges with I-75 at the southwest corner of Flint and we continued north on the combined road until we exited at M-57 and headed east through Clio to M-54 and turned south.  A few miles later we turned into the Fireman’s Park on the east side of the highway.  It was 9:15 AM as I parked the car.

When I talked to rally co-host Marty Caverly last week only 14 rigs had RSVP’d for the rally.  There were over 20 rigs there when we arrived and five more showed up during the day.  A guy also brought a Country Coach Prevost XL conversion down from Saginaw for the afternoon.  He is trying to sell it and wanted to let the rally attendees check it out.

We made the rounds and said our “hello”s to everyone.  As has happened at past rallies where we have dropped in for a day many of the ladies took off to check out local garage sales.  Bill and Karen Gerrie were just pulling out but stopped to chat briefly.  Frank and Sandy Griswold’s Featherlite H3-45 conversion has windows that slide open rather than swing out like our awning windows so I asked Frank and several other people about screens for these.  Everyone had the same suggestion; that any local window and door business should be able to make them.  I was trying to get useful information for someone who had e-mailed me as a result of an article in BCM.

The roundtable discussion started at 2 PM and most of the rally attendees were back by then.  Pat Lintner, our GLCC national director, gave a pitch for the FMCAssist program, which is included as part of the annual FMCA membership and more than worth the annual cost of $40.  I announced that we had GLCC T-shirts and a few flags with us if anyone wanted to buy them.  I also announced that the Arcadia Rally website had disappeared but that Bill and Brenda Phelan are working to fix the problem and the rally is still on for December 26-31, 2015 with departure on January 1, 2016.

Ed Roelle had two topics for the roundtable:  1) “towing insurance” for our bus conversions, and;  2) causes and cures for hard water deposit buildup in the fresh water plumbing associated with an Aqua-Hot (Webasto diesel burner) heating and domestic hot water systems.  Most of us use, or have used, Coach-Net for our “emergency roadside assistance” coverage.  The plan includes towing but many of our members have switched to one of the three Good Sam ERS plans.  The top (platinum) plan is ~$140/year.

A couple of years ago Coach-Net decided they would not cover bus conversions more than 40 years old and alienated quite a few folks in the converted coach community.  They eventually reversed that position but the damage was done.  Others who stayed with them have had issues getting service or being charged ridiculous sums of money for simple things.  Coach-Net was officially endorsed by FMCA until recently, and is still endorsed by The Escapees RV Club, but FMCA has found a different provider for this important service.

We stuck around after the roundtable and continued chatting with folks in constantly shifting groupings.  The dinner meal was planned for 6 PM, and by 5:30 preparations were well under way, so we started saying our “goodbyes.”  We finally got our chairs back in the car at 5:50 PM and pulled out at 5:55.  There were very ominous clouds moving towards the rally site from the north as we started for home and a severe weather watch had been posted.

To get home we reversed our route taking M-54 north to M-57 west through Clio to I-75/US-23 south.  We stayed on southbound US-23 at the split with I-75 southwest of Flint and eventually exited onto M-59.  Instead of going west towards home we headed east and pulled into the Hartland Meijer’s to pick up something for dinner and get fresh ingredients for tomorrow’s dinner with Steve and Karen.

The weather we saw approaching Clio from the north was just moving into Hartland as we left the Meijer’s, so it was a rapidly moving system.  The storm clouds were very dramatic but we got back to the house and got the car unloaded before the rain came.  The wind gusted strongly for a while but in the end we did not get as much precipitation as we needed or thought we would.

For dinner we had vegan burgers with all the fixin’s, oven-baked French fries, and fresh strawberries.  It was 9 PM by the time we were done eating.  We were both tired from our long, but very enjoyable, day so we went to bed earlier than usual.

 

2015/08/06 (R) Three Quarters Framed

Leave a reply

As usual, we started the day with breakfast and then enjoyed our coffee while reading and writing.  Best Pest Control showed up mid-morning to apply the second treatment for hornets, wasps, etc. so we closed up all of the windows and doorwalls while they sprayed.

We located a Wayne-Dalton facility in Livonia so I called them.  As I suspected they were the factory distribution center and would not sell to us directly.  They did, however, give me the name of one of their customers, a business in Milford named The Door Doctor that had a retail store front.  I called them and they had a 12 foot length of the required D-channel bottom weather seal for our small (8′) garage door.  It turned out that they were not actually in downtown Milford but were more conveniently located near the Milford Road exit of I-96.  When the pest control guys were done and gone I drove over and bought the seal.

Back home Linda made quesadillas for lunch and set out some yummy black grapes.  We then made an errand run to Howell.  Our first stop was at Teeko’s Coffee and Tea where we ordered a pound each of fresh roasted Ethiopian Yirgacheffe half-caff and Costa Rican half-caff beans.  The Yirgacheffe is one of our favorites.  The Costa Rican is something new for us.

Our next stop was The Home Depot for a half sheet (4′ x 4′) of 3/4″ plywood.  They only had one type in a 4′ x 4′ size and I did not like it so we did not buy it.  They had nicer plywood in full sheets (4′ x 8′) but I did not need that much and did not want to fuss with something that size.  We did, however, find a drawer/cabinet pull that we liked and bought one to try out with our bus cabinets.  It’s a Rockefeller style from Liberty in an antique brass finish for a 3″ center-to-center hole spacing.  They also had a matching single screw knob in case we need it.

Our next stop was the Howell Art and Frame shop in downtown Howell to pick up three of our four pieces of artwork.  The owner, Rick, had ordered the fourth frame the wrong size and had to reorder it.  The three that were finished looked very nice and I would like to think that the artist, Ann Metzger, would have been pleased with our choices.  Ann was married to my mother’s cousin and took up painting as rehabilitation therapy for breast cancer surgery in her early 40’s.  She turned out to be quite good and was active in the St. Louis artist’s guild for many years.  We have collected many of her works over the last 44 years.

We stopped at Lowe’s to look at their drawer pulls but they did not have anything similar to the one we got at The Home Depot.  We stopped back at Teeko’s to pick up our coffee order and then headed home.

Back home we moved the paintings to the library and turned our attention to installing the seal on the 8 foot wide garage door.  With the door all the way up we were able to slide the old seal out towards the larger door.  I thought we could install the new one with the door in the same position without removing the track from the bottom of the door.  That was, indeed, the case but it did not go in easily.  I trimmed the ends and ran the door up and down a few times and made minor adjustments on each end until it worked properly.  We still need to redo the side and top seals for both doors.

I tried programming the garage door remote control in my car the day we installed the new opener on the small garage door but wasn’t able to.  At the suggestion of the woman at The Door Doctor, I Googled the model numbers of our various remotes and found the manuals.  I had forgotten that the four 3-button remotes we bought a couple of years ago had to be configured before they could be paired with the openers.  Once I knew how to do that I was able to program mine and Linda’s to work with both doors.  Each of our children also have one and I will have to re-program those the next time they are here.

I exchanged e-mails with Josh at Coach Supply Direct about picking up the extra fabric we ordered, perhaps next Tuesday.  I also e-mailed and texted with Jarel about picking up the desk pieces next Tuesday and possibly the pieces for the built-in sofa.  He did not, however, receive the mailing tube with the drawings and cut sheet today, so we will see if that works out.  I suggested he defer work on the pull-out pantry in favor of the sofa pieces as that will allow me to keep working while he is on vacation at the end of this month.  He still owes us a price estimate for the pantry but at this point it almost doesn’t matter as he will be the one building it regardless of the number.

I talked to Terry at A-1 Upholstery in Elkhart regarding the sofa cushions.  She and her mom, Lou, run the business.  I last talked to Terry in early June and she remembered the conversation.  I described once again what we were looking for and she gave me a rough estimate of the cost.  She said we could stop by Tuesday morning to drop off the fabric and discuss the job and thought they could have it finished by the end of August.  That would be great timing for us.  We are starting to feel like this whole project will come together nicely once we get the refrigerators swapped and can finely get back to work on the floor of the bus.

I installed the new Morgan M-302N I.C.E. style lightning arrestor and connected the radio and antenna cables.  I had a short QSO with Mike (W8XH) via the South Lyon 2m repeater and had no issues on transmit or receive.  I started working on a gallery post of 45 photos from the ARRL Field Day event at the end of June but only got half of it done before dinner.

Linda made a delicious zoodles dish for dinner.  Zoodles are zucchini noodles that she cuts with her SpiraLife slicer and uses in place of grain or rice pasta.  The dish had the usual garlic, onion, olive oil base but also had shallots, mushrooms, kale, and sun-dried tomatoes.  We had fresh watermelon later for dessert.

After dinner I finished the gallery post while monitoring the Novi and South Lyon repeaters.  I then had a long QSO with Mike (W8XH) and Steve (N8AR) that gave me a chance to test the M-302N lightning arrestor on both VHF and UHF at three different power levels.  We continued to have the minor problem with quick, apparently random, audio dropouts on our Yaesu FTM-400 dual band radios.  The apparent randomness has made it difficult to puzzle out what might be causing this and we all agreed that we need to set aside time to plan and execute a systematic test and record the results for analysis.

Butch called to chat about house (bus) battery cabling and other things.  I mentioned that we would be coming down on Tuesday and would try to arrange our timing so we can stop and visit over dinner.  We then watched The Princess Bride on DVD.  It’s our all-time favorite movie and I long ago lost count of how many times we have seen it.

 

2015/08/02 (N) No Swap Sunday

Leave a reply

The forecast for today was for warm, humid weather so we closed up the house and turned on the air-conditioners as soon as we got up.  We left around 9 AM for the Howell Farmers Market so I did not make coffee and we did not have breakfast.  At the market Linda bought a nice assortment of fresh vegetables.  I bought a bag of Kenya AA coffee beans from Teeko’s and some apricot and raspberry Rohlicky from the Czech Bakery.  It turns out they are not vegan so I won’t buy them again.

We decided to see if John and Diane were available for dinner.  We had no sooner made these arrangements when I got a text message from Chuck indicating that the coast was clear at his shop in Novi and we were good to go on the refrigerator swap.  I talked to him shortly thereafter and indicated that we had assumed it would not be today so I had not yet cut the support 2x4s or found the additional help that we would need and, in light of that, had made other plans.  That was fine with him and we agreed to aim for next weekend.

Linda surveyed her inventory of ingredients and decided that the warm Farro with dried cranberries and nuts would be a good dish to have Diane help make.  Diane retired at the end of the school year in June and had asked Linda if she would show her some of the ingredients and prep/cooking methods she uses.  Linda likes working with friends in the kitchen, sharing what she has learned and learning new things herself in the process.  Diane is her longest term, non-family friend.  As an English teacher she had lessons to prepare and papers to grade almost every evening.  As a result John, who has worked most of his adult life as a framing carpenter, took care of preparing their evening meals.  Now that Diane is free of her teaching obligations she would like to learn more about cooking.

Linda wanted some non-dairy ice cream for dessert so I was sent to get it.  I went to the Home Depot in Brighton first where I bought some thin (1/8th inch thick) rubber sheet material, a small tool pouch, and 2-person forearm lift strap.  The rubber material will be for the edges of the plywood in the new built-in sofa, cushioning the seat when it is closed.  The tool pouch is for working on the tower (my carpenter’s tool belt is too big) and the lift strap is to help with the refrigerators and anything else heavy we might need to move.

The only place within a seven mile radius of our house that consistently has the non-diary “ice cream” we like is the Kroger on M-59 at Old US-23, so that’s where I headed next.  In addition to the Coconut Bliss they had a cashew milk based product so I bought some of each.  I bought vanilla and salted caramel in the CB brand and snickerdoodle in the cashew product.  By the time I got home I only had a couple of hours left before John and Diane were due to arrive so I worked in my office and uploaded blog posts for June 16 – 20.

John and Diane arrived right on time at 4 PM.  I opened our bottle of Viva La Roja from Heart of the Desert Winery in Alamogordo, New Mexico and we settled in to easy conversation.  I found this red table wine particularly to my liking; very smooth with a hint of sweetness and no tannin.

Linda and Diane eventually started preparing dinner.  John and took that as an opportunity to go look at the bus project.  The ladies made a mixed greens salad with dried cranberries and other add-ins and put out a choice of dressings and sliced a loaf of Italian bread that they brought, along with a bottle of Pinot Grigio that we opened to have with the meal. The main dish was Farro with dried cranberries, almonds, onions, garlic, and kale.  It was all very tasty and well received.

By the end of the meal it had cooled off enough to sit on the deck comfortably.  Linda served the cashew milk snickerdoodle non-dairy ice cream with fresh sliced strawberries and it was very good.  I showed them what we had done with antennas on the tower and the cable entrance box and then we went back inside.  John still works full-time so they left around 9 PM as it takes at least 30 minutes to get back to their house in Farmington Hills which is about a mile from our old house.

 

2015/07/14 (T) Red Chili Wine

Leave a reply

Storms moved through the area overnight with more lightning and thunder than rain, or at so it seemed.  The storms were triggered by a cold front, behind which we had a cloudy day with periods of rain.  Linda was up at 7 AM and read quietly until I got up at 8.  I made a full pot of coffee (Cafe Europe half-caff blend from Teeko’s) and then joined her in the living room.

Linda was checking Dr. Michael Gregor’s speaking schedule and saw that he will be at Wayne State University in December and will be one of the keynote speakers for the 2016 Holistic Holiday at Sea vegan cruise.  We have not heard him speak in person, and will not be here in December, so that would be another reason to go on the cruise again.  By 9:45 AM Mara had not emerged from her rig so we went ahead and had breakfast.  Linda then went for a walk and I went to my office and worked on the design of the custom desk for the bus.

Mara finally emerged at 10:30 AM and we chatted for a while until Linda got back.  Our chat was briefly interrupted by a call from Mike (W8XH) on the Novi repeater so Mara got to see ham radio in operation.  My reception was weak and noisy and according to Mike my transmitted signal wasn’t any better.  The only thing that has changed since we tested this late last week is that I got the repaired M-302N VHF/UHF lightning arrestor back from Morgan Manufacturing yesterday and re-installed it.  Mike is going to help me do some more testing, but I am rapidly coming to the conclusion that these units are defective by design and I will have to replace them with something else.  I am disappointed to say the least.

It was another cool, cloudy, rainy day, just the kind of day for staying inside and getting stuff done.  Linda and Mara both had things to do and settled in at the dining room table to work.  Mara has been focused on planning her upcoming travels and spent much of the day making reservations.  Linda worked on the bookkeeping for our GLCC chapter and SLAARC ham radio club (she is treasurer of both).  She also renewed our Coach-Net emergency road service and our Harvest Host membership, which had expired, and probably took care of a lot of other things that I don’t even know about.  Except for an occasional break I worked on the custom desk design until 6:30 PM.  On one of those breaks I needed to measure something in the bus so we gave Mara the inside tour.

When I came upstairs Mara was taking advantage of the unlimited hot water available in our guest bathroom to have a nice long shower.  We know from personal experience what a luxury it is to take such a shower when living in an RV.  Linda had started preparing our dinner so I opened the bottle of Hatch Red Chili wine.  This wine, from St. Claire Winery in Deming, New Mexico is one of the more unusual wines we have ever had but we really like it.  It is a slightly sweet red wine with no tannin, a hint of chili flavor, and heat in the back of the throat on the finish.  We had vegan mock Italian sausages with sautéed onions and red peppers and the wine went well with it.  I had mine on a hotdog bun with mustard.  Mara had another serving of her beef stew, which she is trying to use up, and Linda put out a plate of whole, fresh strawberries.

One of the nice things about having visitors is that meals take longer to eat as we linger at the table in conversation.  Mara returned to her rig around 9 PM to have some quiet time with her cats before going to bed.  Linda decided to watch a couple of TV programs and I went back to work on the desk design.  I called it quits around 10:45 PM and went to bed to work on this post.  The overnight low is forecast to drop into the upper 40’s which should make for excellent sleeping.

 

2015/07/13 (M) weBoost

Leave a reply

Linda got up before I did and went for a long walk.  I was up by the time she got back and made a full pot of the Sumatra Mandheling coffee I just got from Teeko’s.  Mara eventually joined us for coffee and then breakfast.

Mara wanted to get the engine and generator serviced in her Fleetwood Bounder motorhome and asked for recommendations in the area.  There were three relatively convenient options but we had her contact Cummins Bridgeway in New Hudson, in part because she has an Onan (Cummins) generator and in part because we took our Itasca Sunrise motorhome there and were always pleased with the quality of the service.  They said they could take her on Thursday and she set up the appointment.  They estimated three to four hours so she plans to wait for it.

Mara was also interested in a mobile cellular booster for her motorhome, and I have been planning to get one for several years, so we researched the current offerings online.  At one time Wilson Electronics practically owned the mobile booster market.  They have more competition now and their consumer systems have been rebranded “weBoost.”

After scanning what was available we focused in on the weBoost Drive 4G-M and Drive 4G-X.  I downloaded the PDF manuals for each of them and studied the specifications. I don’t care about the marketing hype.  As they used to say on Dragnet “the facts mam, just the facts.”  Both units are 5-band, multi-mode units designed for in-motion use and the specs were very similar, but not identical.  The MSRP on the X model was almost $100 more than the M model so I called Cellular Solutions and talked to Judy.  In practical terms, she said the X model would work with weaker signals.

I was prepared to order two of them but they did not have them in stock at their Sanford, Michigan location.  She thought she could have them to us by Friday but that was not soon enough and we did not want to pay $30 for 2-day shipping on top paying almost $30 in sales tax (for each unit).  So we did what we always do, we checked Amazon.  Amazon had four of the weBoost Drive 4G-X systems so I ordered two of them with Prime 2nd day shipping of $4.99 each and no sales tax.  They are scheduled to arrive on Wednesday July 15 which will give us enough time to get them installed.

The installation on both rigs will require me to attach a steel plate to the roof to act as a base for the small 4″ tall magnetic mount outside antenna.  On our rig I will probably put the antenna up front and screw the plate to the existing aluminum plate, using putty under all the edges and the screw holes, and then caulk around the edge and the heads of the screws.  The cable will come in through the front weatherhead.  On Mara’s rig I will see if I can route the cable through the refrigerator roof vent or the roof-mounted air-conditioner cover.  The route will determine the placement of the steel base plate.

Linda made an appointment for Mara with our hairdresser, Renee, at the J. C. Penney’s salon at 12 Oaks Mall for Wednesday at 1:30 PM.  By the time we had accomplished all of this it was early afternoon and time for a light lunch.  After lunch Linda and Mara went for a long, vigorous walk and I retreated to my office and worked on the custom desk design.  I e-mailed Jarel to see if he would be available on Thursday.  He e-mailed back that any day but Thursday would be OK, so I may go Friday but more likely it will be next Monday.   I thought I could have the design done by Wednesday bedtime, but it would have been a push and I did not want to rush the process and risk making a mistake.  As much as I hate to delay this until next week I may have to.  Mara may leave on Friday, or delay until Saturday or Sunday, and I want to be hear when she leaves.  Meanwhile, Madeline is coming to stay with us on Friday and will be here until Monday.  These are indeed busy times.

I came back upstairs just before 5 PM and found the ladies sitting in the shade at the east end of the deck.  Mara was busy using MapMyPlaces to plan the next leg of her travels from our house to Quebec City, a trip of just under 1,000 miles.  I got a couple of ice cold beers (Linda did not want any) and we sat and talked until Mara returned to her rig at 6:30 PM to tend to her cats and have an hour of quiet time before dinner.

We got back together at 7:30 PM for dinner, which consisted of leftovers plus a simple salad for us.  Dinner led into a long discussion about health and nutrition.  We talked about the Holistic Holiday at Sea vegan cruise, which usually takes place the first week in March, and the vegan summer fest that takes place each July in Pennsylvania.  Mara seemed interested in both and thought she might be able to get her friend, Michael, to go on the cruise with her.

The more we talked the more we thought we might like to go again.  The last time we went, in 2013, we researched places where we could board the cats.  The only place we found that looked any good was in Punta Gorda.  Punta Gorda is quite a drive from Ft. Lauderdale, but it is not that far from Arcadia where we will be parked for January and February.  It would be easy to take the cats there and then drive to the Port of Miami to catch the ship.  However, if Mara goes on the cruise we might have another option.  When she has to leave her rig for a while, such as her recent trip to Belgium, she flies her sister in from California to house and cat sit.  She assured us that “sis” would be happy to take care of our cars as well.  All that would be required would be for us to have our motorhomes at the same RV park.  That could be Big Tree in Arcadia (since we would already be there) or someplace near Miami (if we could both get in).  Adjacent sites would be nice, but not necessary.  I have no idea if we will do this, but it was fun to consider the possibility.

 

2015/07/12 (N) Mara Comes To Visit

Leave a reply

When I shut down the bus yesterday I forgot to shut off the air supply to the engine accessories and turn off the chassis batteries, so I did that as soon as I got up this morning.  I then made coffee and we had our usual juice and homemade granola.  After breakfast Linda went shopping and I went to Lowe’s.  She picked up a lot of fresh vegetables at the Howell Farmers Market and finished up at Meijer’s.  I bought a 4-piece screw extractor set and then stopped at O’Reilly’s and bought two gallons of 50/50 pre-mixed universal antifreeze to top up the Aqua-Hot in our bus.  I stopped at Teeko’s Coffee and Tea and had them roast a pound of Sumatra Mandheling beans.  We have not tried these before but Mary thought we would like them.  They are not decaffeinated, but we try to keep a regular coffee bean on hand for company, after dinner, or when we want (need) the high octane in the morning.

Linda had been in contact with our friend Mara for the last few weeks so we knew that she might stop here on her way to the Canadian Maritime Provinces.  Late last week she confirmed that she would be here on Sunday so after our morning errands we turned our attention to getting ready for her arrival.  She lives/travels in a Fleetwood Bounder (Class A motorhome).  We saw it in Quartzsite, so we knew it was somewhere between 35 and 40 feet in length and that she does not tow a car behind it.  Yesterday we moved our bus so she could park on the level pad with easy access to our 50 Amp electrical hookup.  I cleaned up the coaxial cables that I had spread out all over the rec room floor and Linda vacuumed the carpets and wood floors and cleaned the bathrooms.  We keep a clean house but it is not always tidy as we are involved in a lot of projects at the moment.  But when company is coming we like things to a least start out tidy.

Mara was coming from Michigan City, Indiana so she only had 200 miles to travel.  Most of it would have been on Interstate highways but she decided to detour over to Three Rivers, Michigan to visit a Latvian community located nearby.  She finally arrived at our house around 2:30 PM.  We met her in the street and I directed her into her parking spot.

It’s always exciting, and a bit intense, to meet up with an RV friend and that was certainly the case here.  Mara had enjoyed her stop at the Latvian community even though she found them in church.  We had last seen her in Quartzsite, Arizona in February.  We had all had a lot of RV travel adventures since then, and it was also her first visit to our house, so we had lots to talk about.

Linda made bow-tie pasta with mushrooms, onions, garlic, sun-dried tomatoes, and basil pesto using basil that she grew on our back deck.  We had a simple green salad and Italian bread with the meal and enjoyed 1-1/2 bottles of the 2013 Egri Merlot between the three of us.  We sat on the deck enjoying the last of the wine until it cooled off and we went inside.  By 9 PM we were all tired but we insisted that Mara stay for fresh sweet cherries.  Rejuvenated by the cherries we all got our second wind and had a long conversation about RVs, cellular and Wi-Fi communications while traveling, and a cool routing app that Mara uses (MapMyPlaces).  By 11 PM we were all tired for real and Mara returned to her rig for the night.  It had been a long, but very satisfying, day for all of us.

 

2015/07/01 (W) Coach Supply Direct

Leave a reply

We were up at 7 AM and left at 7:45 to drive to Coach Supply Direct in Edwardsburg, Michigan.  On the out of town we stopped at Teeko’s Coffee and Tea for coffee and bagels to go.  The coffee was single origin Kenya and was very good.  We drink half-caff at home so I will check with Jeff to see if this also comes in a decaffeinated bean.

We took I-96 west towards Lansing and then took the Lansing Road cutoff to I-69 south.  We exited at M-60 and headed west towards Three Rivers.  Our plan was to drop down M-40 to US-12 for the final run into Edwardsburg but M-60 was closed in Minden and the detour took us south on M-66 towards Sturgis.  We were about half way to Sturgis when the detour turned west back towards Three Rivers so we continued on to Sturgis where we picked up US-12 and continued our westward journey.  We stopped at the McDonald’s in White Pigeon for a second cup of coffee and then finished our trip to Edwardsburg.

Coach Supply Direct is located on Elkhart Road just south of US-12.  It was easy to find and Josh greeted us as we pulled in.  We looked at his Lambright fabric samples again and were just not finding exactly what we wanted so Josh suggested we check out the selection at Pro-Forma (?) on the southeast side of Elkhart.  They are a major supplier of surplus yard goods in the area and he often gets fabric from them for projects.  He offered to go over with us but we did not want to pull him away from his work more than we already had.  He called to let them know we were coming without him.

We took US-12 back east to M-217 and dropped into Indiana where the road becomes County 17.  Just before US-20 we turned west and about 1.5 miles later we turned south onto Hall Road and pulled into Pro-Forma’s parking lot.  Bob (the owner) was out but we found Mike back in the warehouse.  He took us to the room with the sample books and we looked at a sample of every fabric they had but did find anything even close to what we were looking for.  Bob returned from his errand run and we commented that apparently plain off-white upholstery cloth was out of style.  Quite to the contrary, he said it is very much in use and as a result there is very little, if any, surplus coming out of the Elkhart-based RV manufacturers.

I took a different route back to Edwardsburg, driving through Elkhart on some streets I had not driven before.  After talking with Josh some more we had him do a final estimate (quote), sans fabric selections, as follows:

  • Two (2) Flexsteel 529 Class C captain’s chairs with skirts, adjustable arm rests, 8.5″ swivel pedestal with 20″ seatbelt bar, tan seatbelt, and slide tracks.
  • One Flexsteel 591 Class A driver’s captain’s chair with skirt, adjustable arm rests, and power lumbar option.
  • One Flexsteel 591 Class A co-pilot captain’s chair with footrest, skirt, adjustable arm rests, and power lumbar option.
  • 15 yards of additional fabric TBD.
  • Seven (7) MCD Duo Shades with dark out fabric TBD.
  • An estimate of a 2 to 6 hours labor to install everything.

Josh converted the estimate (quote) into an invoice and Linda wrote him a check for the requested 50% deposit.  He then let us select Lambright fabric samples to take with us.  We removed six from the binder rings and also took one of his sets of MCD dark out material samples.  I had planned to stop and visit with Michele Henry at Phoenix Paint but had not told her that we were coming so she was not expecting us.  By the time we left for home it was 3 PM so we waved as we drove past her shop.

Linda had packed food for the trip so she ate her vegan yogurt and got out the grapes for both of us to munch on.  Instead of retracing our route from the morning I stayed on US-12 all the way to Coldwater.  By the time we reached I-69 I was hungry so I pulled into the Walmart.  I ate my yogurt in the car and then we went in to buy Snyder’s sourdough pretzel nibblers, Blue Diamond Wasabi Soy almonds, and some mini-strudels (apple and cherry) that did not contain any animal products (according to the label).  We got on I-69 going north and I exited at M-60 for fuel.

We got home around 6:45 PM.  UPS had delivered the order I placed yesterday with Amateur Electronics Supply so I brought that in from the porch and set it aside for tomorrow.  I opened one of the boxes of Armstrong floor tiles, removed a tile, took it to the bus, and set it on the floor in the kitchen.  We took the Lambright fabric and MCD dark shade samples to the bus and had an initial look at all of them together with the walnut woodwork, floor tile, and existing wallpaper (which is going to get replaced with something).  We left them to look at again tomorrow in better/different light and went in to have dinner.

Linda reheated the potato-kale curry leftovers and served some fresh watermelon.  I checked e-mail and responded to some that related to the SLAARC website.  We relaxed by watching two episodes of “First Peoples” on PBS and then went to sleep.  It was a long, tiring day with somewhere between 350 and 400 miles of driving and 7 to 8 hours of sitting in the car.  We were glad to have the chairs and shades ordered, and to have decided (for now) to go with the custom made sofa cushions, but we were frustrated by still having the fabric and shade materials undecided.  We told Josh we would have a decision by Friday so tomorrow will be final decision day.

 

2015/06/29 (M) Website On The Air

Leave a reply

Linda was up at 5:55 AM this morning and left for the bakery at 6:15.  Experience has shown that this is usually early enough to get ahead of the morning rush hour traffic inbound to the Detroit metro area from the northwest.

I got up about an hour later, had granola for breakfast, and enjoyed my morning coffee (Sweet Seattle Dreams half-caff blend from Teeko’s) and then made a run to Lowe’s to purchase a couple of copper ground lugs and 5 feet of #10 green ground wire.  Back home I tried to use one of the ground lugs to terminate the ground wire from the cable entry box (CEB) to the 36″ ground bar on the wall behind the ham radio desks but it’s shape prevented the wing nut from going onto the stud.

I planned to use the other lug to attach one end of the #10 wire to the ground bar and put a male spade lug on the other end to mate with the connector on the Go Box ground pigtail, but that clearly was not going to work.  I dressed the ground wire and (temporary) coax in the ham shack and put the ceiling tile back in place.  I then started cleaning up the living room and small bedroom per Linda’s request before she left this morning.  Some of our (my) projects have a way of expanding throughout the whole house.  I had hoped to also pick up the coax cables spread out in the recreation room, and at least start to straighten up the ham shack/office, putting materials away and moving tools to the garage.

At 10 AM I made a few phone calls.  The first was to Rick Short at ISRI USA regarding the 6860 bus driver’s seat and a possible visit tomorrow morning.  I got his voice mail (again) and never got a return call (again) so I gave up on getting any assistance from him or from ISRI USA.  I called Linda to make sure she did not have any commitments on Wednesday and then called Josh at Coach Supply Direct to set up a visit to his shop for Wednesday late morning.  Linda and I plan to finalize our Flexsteel furniture order and give Josh the deposit during that visit.  Next I called Scott Adams, AC8IL, at Adams Electronics and ordered a 20 foot length of LMR-400 with an N-male connector on one end and a PL-259 connector on the other end.  Scotty and I also chatted briefly about tower bases.

I e-mailed Scott Neader at QST.com regarding the transfer of the SLAARC domain name and website from GoDaddy to QST.com and got a reply back right away with an outline of the steps I needed to follow.  First on the list was creating an account for our ham radio club through his billing system.  I took care of that and e-mailed him back.

Keith Kish, from Kish Lawn, care showed up around 11 AM to cut the grass.  When he was done I headed back to Lowe’s to look for an alternate ground clamp and pulley support for the tower but did not find anything suitable.  So as not to have it be a wasted trip I bought three more bags of broken brick pieces to use around the tower base and cable entry box.

I spent some time looking at the Yaesu FTM-400DR/DE on several different ham radio equipment vendor websites.  Yaesu is offering a $100 rebate on this 2m/440 mobile radio through tomorrow.  All of the distributors are selling it for the same price, $599.95 and the rebate brings it down to $499.95, so if I buy one it will come down to who has them in stock and is offering free shipping.

Linda got home from the bakery around 3 PM, earlier than I expected and nice for her.  She went for a walk while I continued to fuss with ham radio and website stuff.

For dinner Linda made a white beans and mustard greens dish.  We eat a lot of lettuce, kale, and spinach, both raw and cooked into dishes, but only occasionally have collard greens or mustard greens.  Mustard greens have a very strong, bitter flavor and I liked them more than Linda did.  I think they are an acquired taste and may be more suitable as an accent ingredient rather than a main one.

After dinner I checked my e-mail and had a reply from Scott at QTH.com.  The QTH SLAARC account invoice was ready so I paid it using a personal credit card.  I then moved the coax from our Icom IC-7000 to Mike’s Icom IC-2820H and turned it on.  Mike was on the South Lyon repeater discussing the Field Day event with Steve (N8AR) and Bruce (W8RA).  Paul (N8BHT) was able to join the conversation but I was not successful breaking in so I just listened.  It was an indication that my power into the repeater was probably still marginal but a good reminder that ham radio conversations are very public.

When they were done I called for Mike and he came back.  We had a good QSO (chat) about the Yaesu FTM-400.  Jim (N8KUE) joined in for a while.  After Jim dropped off we tested my ability to transmit to, and receive from, both the South Lyon 2m and Novi 70cm repeaters.  The added power of the IC-2820H over my IC-7000 (50W vs 35W in the 70cm band) combined with the lower signal loss of the better coax made just enough difference that I could hold the Novi repeater when transmitting although my signal was still on top of a lot of noise coming back out of the repeater.

Linda wanted to watch an episode of Scorpion, followed by NCIS Los Angeles, after which I caught an episode of Two and a Half Men and then turned off the TV.  I will have to make a decision about the Yaesu FTM-400 in the morning.

 

2015/06/25 (R) The Mouse

Leave a reply

Brighton Honda called yesterday in the afternoon to get permission to do additional work on my car.  Since we plan to keep the car for a while, and then perhaps give it to our son, it was the kind of work that needed to be done regardless of the costs.  They called back later to indicate that they would not have it aligned before closing time.  That was fine with us as it would have been inconvenient to impossible for us to get there by 6 PM to pick it up.  Linda told them to call in the morning when it was ready.

The top of the 40-foot tower from the WNW showing all of the antennas and the pulley with the haul rope. The weather had definitely deteriorated from the day before.

The top of the 40-foot tower from the WNW showing all of the antennas and the pulley with the haul rope. The weather had definitely deteriorated from the day before.

It is amazing how attuned we become to routine sounds and how sensitive we are to non-routine ones, even (especially?) while sleeping.  So it was last night that I was suddenly aware that one of our cats was making a repetitive sound that was unusual.  I turned on my flashlight, hoping to not disturb Linda, and got out of bed.  Both cats were hunched down on the floor on Linda’s side of the bed with Jasper in front.  He was the one responsible for the sound and the reason was next to his head and about 3 inches away; a little dark gray mouse.

My first thought when I see one or both of the cats with a mouse next to them rather than in their mouth is that it is dead but that was not the case.  This mouse was alive and apparently not injured.  I have seen this behavior before in which the mouse basically “plays dead” and the cats leave it alone but watch it carefully.  Mice seem to know that cats are triggered by movement and that if they sit very still the cats just sit there and guard them.  It was 4:30 AM and I was not fully awake so I do not recall the exact sequence of events, but the mouse somehow ended up in our master bathroom.   I do not recall what I did with the cats but I think I went and got a box with high sides and tried to get the mouse to go in it and it made a run for it towards the bathroom.  Linda was awake by this point so she got a towel for me.  I went in the bathroom and used the towel to block the gap under the door and prevent the little critter from getting back into the bedroom while I tried to get it into the box.  I was unsuccessful and it managed to find a place to hide in the hot water baseboard radiator.

Linda got one of the live traps we recently purchased and baited it with the recommended saltine and peanut butter.  We set the trap near the radiator, turned out the bathroom light, shut the door, and tried to plug the gap with the towel from the outside, figuring we would deal with the mouse in the morning.  Juniper kept pawing at the towel and pulling it back from the door so we put both cats out of the bedroom and shut the door.  They found that confusing as they sleep with us and generally have the run of the house.  One or both of them pawed at the door meowing to get back in for quite a while.  It wasn’t the best night’s sleep we have had and the timing was unfortunate given the hard day of tower work.

Brighton Honda called at 8:01 AM to let us know the car was ready.  Hello, I’m awake now!  I checked on the mouse and it was now safely tucked away on top of the radiator fins inside the housing where neither the cats nor I could get to it.  We decided to leave the live trap in place, sealed the gap under the door, and kept the bedroom door shut to keep the cats out.

I had planned to drive to Isringhausen’s U.S. headquarters in Galesburg, Michigan today but first we had to get my car.  As long as we were headed that way we decided to go to the Brighton Panera for coffee, but had toast and juice for breakfast at home before we left.

The 100,000 mile service is extensive and includes changing the spark plugs.  Beyond the routine service items the Element needed a new ball joint and tie rod and had a stuck brake caliper pin that had to be repaired.  Given the front end work I also had them align it.  Butch and I rebuilt the front brakes last year so I was surprised that there was an issue with them, but the car has been towed and driven in some harsh environments since then so that may have been a factor.

The Panera at Grand River Avenue and I-96 is not one of our favorites.  More often than not we end up with coffee grounds in our cups and the bathrooms are not maintained as they should be.  Today was not the first time we have been to this location that the men’s restroom was out of toilet paper.  It is also often freezing cold inside the restaurant and today was no exception.  The weather was overcast and a bit gloomy but the outside temperature, while not warm, was much more comfortable than inside.  We were also unable to connect to their Wi-Fi signal, which is generally useable.  That’s pretty basic stuff to not be able to get right and falls squarely on local management in my opinion.

While we drank our coffee I called Rick Short at ISRI to make sure he would be in but I got his voice mail again.  I asked for a call back but never got one so I did not make the trip to Galesburg.  Apparently they have better things to do than be of assistance to me.  I only want to buy one chair, not a fleet of chairs, so I understand my relative unimportance, but I don’t like it just the same.  We decided to spend the day at home completing the work from yesterday, which had made a mess throughout the house.

One of the things we needed to do was register our cellular booster system.  Given that it is a five band device I was not clear on whether we had to register it only with Verizon or with all of the carriers.  I called the company we bought it from, Cellular Solutions, and talked to Judy who said we only had to register it with the carriers we personally use.  For us that is Verizon Wireless.  Registration was via the Verizon Website and was simple enough.  It did, however, require me to log in to our My Verizon account and navigate through a couple of screens to a page where we could enter the information from the label on the box.  The serial number was on two peel off tags, so one of those went on the booster and the other one went in the manual.

With the unit registered I turned the power switch on and watched the ‘Alert’ lights all go solid yellow.  As I mentioned in yesterday’s post solid yellow lights are not described anywhere in the manual.  I called Cellular Solutions back and said I had a technical support question.  The woman on the phone took my name and number and said someone would call me back.

Since I was apparently taking care of phone chores I decided to call Universal Towers and inquire about their B-30 base.  The woman who answered the phone never gave her name but was able to answer some questions.  She indicated that their base might or might not be compatible with older Heights Tower products, depending on exactly which product I had, and that I would have to talk to the owner, Bill, who wasn’t there at the moment.  She did know that the outside-to-outside measurement of the legs on a B-30 base was 30 inches and the base cost $290.  She also told me that the larger bases, like the B-30, consisted only of the three rods with the mounting yokes on top; the three rods were not otherwise connected together in any way.  She also confirmed that the ‘U’ shaped yokes at the top of the base rods were welded on and not adjustable.  The normal installation procedure involved connecting them to the bottom of the legs of the first section of the tower, setting them in the hole as the concrete is poured, and adjusting them by moving them around until the legs of the tower were plumb.  That sounded to me like a process where a lot could go wrong and not be repairable.

I pulled a 75 ohm coax out of the ceiling of the basement yesterday.  We laid it out in the basement to see how long it was and it looked to be at least 60 feet.  Linda suggested we test it before running it through the basement ceiling which was a very sensible idea.  I unplugged the power adapter for the TV amplifier power inserter, detached the coax that feeds the TV in the bedroom, attached the downstairs cable, and connected the other end to the basement TV set.  Linda set up the TV for Antenna input, did an All Channels scan, and got the same stations we got yesterday, minus a couple.

In spite of what appeared to be acceptable performance I decided I wanted a new coax cable and Linda wanted to return three of the ropes I bought at Lowe’s but never used.  She found the receipt and we went to Lowe’s.  They had a good quality RG-6 quad-shield coax (75 ohm) in various lengths including 50 feet, which is what I needed.  At the register I decided to buy two more 40 pound bags of solar salt.  I am not an impulse shopper as a rule but their supply of Morton Solar Salt was very low and stocking up seemed like a good idea.

We stopped at Teeko’s to order coffee.  Mary took our order and rang it up; one pound each of the three different half-caff blends that have become our standard.  We took note of the fact that the Bennigan’s restaurant building on the northwest corner of Grand River Avenue and Latson Road was gone and a sign said a Panera would be coming soon to that location.  We didn’t say anything to Mary, but that cannot be good news for Teeko’s.  We will continue to buy our custom roasted beans at Teeko’s as long as they are open but it is going to be difficult for them to compete with a $2.25 cup of bottomless coffee, free Wi-Fi, a restaurant, a bakery, drive through service, and ample parking with great access to I-96.

When we got home I checked the live trap in our master bathroom and we had captured the mouse.  We took the trap to the northeast corner of the property, towards our neighbor’s pond, and set it free.  It did not want to leave the trap and I had to encourage it to go.  Once it hit the ground, however, it scampered away looking for a place to hide.

We then worked on running the new coax from the basement TV to the sump pump room above the suspended ceiling.  I disconnected the power inserter for the amplifier and disconnected the old coax we had tested earlier.  I notched a ceiling panel at the corner of a boxed support column behind the basement TV to allow the ceiling tile to go back into place around the coax.  We then installed one of the wire channels to contain and hide the coax from the ceiling down to the TV set and connected it to the back of the set.

In the sump pump room I attached the coax from the cable entry box (CEB) to the input of the new 1-to-2 signal splitter.  I attached the coax for the bedroom TV to one output from the splitter and the coax we just ran to the other output.  I mounted the splitter on the wall of the sump pump room and secured the cable coming from the CEB to the ceiling.  I then plugged the power supply for the power inserter back in to an AC outlet.  Linda scanned for channels and verified that everything was working correctly.  We then installed the other wire channel alongside the trim on the bedroom doorwall to route and hide the cable coming up from the basement.

I continued to fuss with the cell phone booster gain settings.  We had not gotten the promised return phone call from Cellular Solutions Technical Support so I called them.  I got Judy again and explained what I was seeing with the solid yellow lights.  She checked with her tech support people and they said the manufacturer (SureCall) told them the solid yellow was the same as the blinking yellow; that the booster was adjusting the gain and it was “normal.”  The manual says that normal is when the light is off, so I’m not sure I buy this explanation, but based on that I left the booster turned on.

With all of that done we started cleaning up the tools and materials we had scattered over two floors of the house.  I decided that was also a good time to start a load of laundry, although it was actually rather late in day for that.  I did three loads by the time I was done and it was sometime after 10:30 PM before the last load was dry.  I needed to be up at 7 AM to be at breakfast in South Lyon at 8 AM as our SLAARC group would start setting up for the ARRL Field Day event at 9 AM.

 

2015/05/27 (W) The Root of all Things

Leave a reply

Yesterday I used up the last of the coffee beans that Jeff at Teeko’s shipped to us in Quartzsite in late February so this morning I transferred the beans we had roasted last week into our airtight containers and started using them.  Grinding our own custom roasted coffee beans is how my mornings usually start and is just another small thing I like about being retired.

We rarely made coffee at home in the morning when we were employed outside the house.  It took too much time and made a mess that had to be cleaned up later, including the travel mug that we had to remember to rinse out at work and then bring home.  Besides, Linda got free unlimited coffee and tea at the office and I found it easier to stop at Panera and get a large coffee to go; half hazelnut and half decaf.  It was part of my morning routine that I found comforting and the cup was disposable when I was done.

I had a follow-up appointment and evaluation at the endodontist today, so I did not work in the bus this morning other than to take a few pictures of the old dinette corner, where I removed the mirrors yesterday, and the area under the bed, which I also worked on yesterday.

After morning coffee and breakfast I went to my office to work at my computer.  I off-loaded the pictures I just took, selected a few, processed them, and copied them to the folder for this blog.  I then downloaded and installed Adobe FlashPlayer in order to view the Gilbreath Upholstery Service website.  The download also installed a McAfee virus checker that I did not ask for or want and I don’t recall being given an option to opt-out.  I really dislike it when programs do things like that.  In fact, I think it should be illegal and companies who do it should be subject to heavy fines.  I tried to download the PDF catalog but Adobe Reader said it had an unrecoverable error.  Arrrgh!  I e-mailed them to request one that worked.  We will see if that results in anything.

I was responding to a few e-mails when Butch called.  He was trying to figure out the best way to connect up the eight L-16 6 VDC batteries he bought in Quartzsite to make a 24 VDC battery bank with a 12 VDC center tap.  Working only from verbal descriptions we finally ended up with the same diagram of a series-parallel interconnection scheme with equal electrical path lengths through all of the batteries.  The difference between series-parallel and parallel-series is not important when the batteries are operating correctly but each connection scheme is vulnerable to a different battery failure mode.  I happen to prefer the series-parallel scheme as I think it results in better battery charging, but that’s an often debated subject.  The equal path lengths through the batteries, however, is something that is worth accomplishing if at all possible.

By the time we were done talking I needed to leave for my endodontist appointment.  Dr. McWatters said the root canal they did on my upper right rear (tooth #4) last September looked good.  They tested the upper rear teeth on my left side but did not find any indication of a problem.  That would normally be good news, except that I had an intermittent problem in that area all winter so I know something is wrong and will eventually require attention, most likely when it is least convenient for me (middle of the night on a weekend).  But for now there is nothing more to do.

hen I got home I had a few pretzels and hummus and some red grapes and then got back to work at my desk.  I copied my blog post drafts for the 17th through the 26th from e-mails to Word and started editing them.  I took a break to have some tea and write while Linda cooked dinner.  She grilled two veggie burgers along with the rest of the asparagus we bought on Sunday and served the potato salad she made earlier in the day.  Most of the asparagus was mushy except for the tips which I attributed to the plants not the cook.  These were very large purple stalks, not the usual somewhat thinner green ones so maybe that had something to do with it.

After dinner I returned to my desk and finished editing all of my blog posts for May 10 through 26.  Somewhere in the middle of that work Phil Jarrell returned my phone call from yesterday.  We agreed that I will call him back after the GLAMARAMA Rally and he will bring his laser level and we will shoot some elevations.  With a little luck and a bit of perseverance we may get a gravel driveway connecting the 3rd (westernmost) culvert to our concrete driveway with a level spot for one or two guest RVs to boondock. We will also get a dozen tree stumps removed, get a French drain installed to remove water from the western end of the property, and get a hole dug for a ham radio tower foundation.  That last bit of digging will also require a rebar cage, hinged tower base, and coordination with a supplier that can pump concrete immediately after the hole is dug.

When I was done editing my blog posts I logged into our WordPress site, deleted 181 spam comments, and installed an update for our Fast Secure Contact Form plugin.  I started creating the post for May 10 but half way through the Chrome browser became non-responsive indicating that it might be out of memory.  That seemed unlikely, but I closed all of the program’s I had open, shut down my computer, and restarted it.  When I logged back in nothing was responding so I sat and waited until I was eventually able to do things.  The first thing I did was uninstall the McAfee Security Scan app that got installed along with the Adobe FlashPlayer earlier today.  I then proceeded to download three updates for Windows and MS Office, or tried to.

The three updates were only 27 MB total, but after 35 minutes they were only 53% done.  My guess was that the data rate on our AT&T “High Speed Internet” (DSL) connection had slowed to a barely usable trickle, perhaps because of all the rain we had the last few days, but whatever the cause it was almost midnight so I left it to finish at its own pace and went to bed.  I worked on this post and played a few games by which time it 12:45 AM so I got up, put on my robe, and went back to my office.  The download had finished and two of the three updates had installed.  The third one reported an error but Windows Update needed the computer to be restarted to finish the installation so that’s what I did.

Windows updates normally install during shutdown and finish installing on startup and that is precisely what happened this time as well.  I let the system startup completely (until the hard drive light was not on) and then downloaded, installed, and ran the latest version of CCleaner.  It downloaded much faster so maybe it was the Microsoft update server that was slow, or perhaps the McAfee app was causing the problem.

We had rain yesterday and more rain today, including some thunder.  The lights flickered a few times both days but the generator never came on.  If out Internet performance is still sluggish in the morning I will reset the AT&T gateway and see if that helps.  I also noticed that our home refrigerator was suddenly showing 45 degrees F instead of 40.  Linda had loaded it up with food yesterday, and added the potato salad today, but the temperature should not have changed by that much and should have returned to the 40 degree set point within a few hours.  Even adjusting the thermostat down did not rectify the problem over the course of the day so perhaps something else has changed, such as a blocked vent.  I will have to check for that tomorrow.  Hopefully the power blips did not blip some control circuit.  I think I will pull the fridge away from the wall and cycle the power.  We can vacuum off the back while it is out.  If it still won’t hold the temperature we want Linda might get a new refrigerator for the house sooner than expected, although a call to AAA Appliance Service Network in Howell might a more prudent first response.

2015/05/19 (T) More Ceramic Tile

Leave a reply

We were up by 7:30 AM.  A cold front moved through here last night with gusty winds and much cooler temperatures.  The overnight low was 49 degrees F so I closed up the house and made coffee while Linda got ready for her girl’s day out with our daughter, Meghan.  We had toast for breakfast and enjoyed our coffee in the living room to the warmth and glow of the gas fireplace logs.  We both agree that this was a good purchase.

Linda left round 9 AM.  I put a load of towels in the washing machine and then called Kate at work.  I left a message asking her if she would check with Brian about an X-Plan PIN.  I then returned a phone call from Kelly at Brighton Ford and had a nice chat about the F-150.  She worked hard to provide me with additional pricing information as a follow-up to our meeting with Frank on Saturday.  She was able to get the price on an in-stock $46,000 F-150 XLT 4×4 off-road down to $40,000 (with X-Plan but before tax, title, and destination charges).  Six grand is a significant difference, and the F-150 is a nice truck, but forty grand is way more than we were thinking about spending on a vehicle.

Kate called me back while I was on the phone and I returned the call as soon as I finished talking to Kelly.  Kate had already checked with Brian and he was willing to get us a PIN.  One of the odd things about shopping for vehicles in Michigan, especially the Detroit area, is that Ford, GM, and Chrysler all have several “plans” that provide non-negotiable pricing for employees, vendors, and family/friends.  These plans are so widely available that dealers practically assume that you have access to one of them.  I think Ford is making good vehicles and the availability of X-Plan pricing certainly makes them that much more attractive.  Unfortunately they are not selling the mid-sized Ranger in North America, just Europe and Australia.  Mid-size trucks are more our size.

View of kitchen floor looking toward rear from living room. Black Ceramic tile has been removed to just past the refrigerator.

View of kitchen floor looking toward rear from living room. Black Ceramic tile has been removed to just past the refrigerator.

I moved the towels to the dryer and then got to work in the bus.  The high temperature today was forecast to be 57 degrees F so I figured it would be a bit more comfortable working on the ceramic tile removal.  I opened all three roof vents and set the front and middle fans on exhaust.  With the front door open there was plenty of airflow.  I put on my Tyvek jumpsuit and gloves and carried the unbroken tiles I got out the last couple of days to the garage for safe keeping.  I then put the pieces of the ones I broke in a laundry basket to get them off the floor.  They will eventually go in small boxes for disposal.

With all of that material out of the way I vacuumed up the small pieces and tiny shards as best I could along with carpet pad staples and tiny pieces of carpet, pad, and wood.  I then removed the small base molding from the hallway which turned out to be more difficult than I expected.  I put on my safety glasses and face shield, grabbed my floor chisel and 3-pound sledge hammer, and continued removing tiles from the floor.

Getting the tiles out of the hallway was more difficult than the kitchen/dining area.  The narrow hallway limited the directions from which I could position and strike the floor chisel and the result was a much higher percentage of broken tiles.  I did a little better as I moved into the area in front of the bathroom and bedroom doors and then into the bathroom.  I stopped when I got to the tiles under the toilet.  I will have to remove the toilet to get those tiles out and that is not going to happen until after the GLAMARAMA rally.  I do not to remove and reinstall the toilet more than once so it will not get reinstalled until after the new floor is in place.

It was 1:30 PM when I quit chiseling for the day and I left the cleanup for next time.  I got cleaned up and went out to take care of errands.  I picked up our freshly roasted coffee beans from Teeko’s, had French fries at McDonald’s for lunch, and then went to Lowe’s.  I was looking for some sort of grinder to grind down the thinset mortar that is adhered to the plywood subfloor but did not buy one.  I bought a wheeled cart to pull behind our lawn tractor instead.

By the time I got home Linda had returned from her girl’s day out.  She showed me all of the things she bought at Ikea, including four long-stem plastic wine glasses.  We took them out to the bus but they would not fit in our wine glass holder.  She also saw an 18 cubic foot refrigerator (Frostig) that might fit in our fridge alcove.

I turned on the gas fireplace logs, made some tea, and put a second load of towels in the washer.  We sat in the living room researching the IKEA refrigerators on our iPads to the warmth of the fireplace.  I had searched for roof access hatches this morning and found several places that sell them online so I showed that to Linda.  I need to call Pat at Apex Roofing and discuss thus approach.

For dinner Linda made very nice salads with raspberries and walnuts.  She then heated up the leftover risotto and lightly sautéed baby carrots as a side dish.  We sat in the living room after dinner for a while and then watched the 1st and 2nd episodes of season 1 of A Touch of Frost.  Although not a BBC production, it was very engaging.

 

2015/05/18 (M) Ceramic Floor Tile

Leave a reply

I plugged my laptop in, started it, put a load of laundry in the washer, and then made our morning coffee.  We are finally running out of the six pounds of beans we had shipped to us in Quartzsite, Arizona at the end of February and will need to get more from Teeko’s sometime soon.  While we were enjoying our morning coffee I pulled up some information online on how to remove ceramic floor tiles.  What I found was a bit discouraging but what was clear was the need for certain equipment and safety precautions.  Linda needed to return the Sherlock DVDs to the Howell Library today so we went on an errand run to Howell.

At the Library we did some more vehicle research in the April 2015 Consumer Reports.  The Chevy Colorado / GMC Canyon mid-size pickup truck was Motor Trend Magazine’s 2015 Truck of the Year, but being a new model CR had no data on predicted repairs or user satisfaction.  Ditto for the 2015 Ford F-150 and its 700 pound lighter aluminum body.  We liked the size of the Nissan Frontier but the manual transmission required for four-flat towing behind our bus will keep us from buying one.  We have not looked at the Colorado/Canyon yet but it is similar in size to the Nissan Frontier.  CR gave good marks to most of the Subaru models and the Forrester was one of their top picks.  Years ago we wanted a Subaru Outback but they were always just slightly too expensive.  Compared to the vehicles we have been looking at recently, the Subaru’s are less expensive.  Right now, however, we are focused on the utility of a 4-door pickup truck.  Yeehaa!

We checked out the DVDs for Season 1 of the British detective series A Touch of Frost. It is not a BBC production so we will see how we like it.  We stopped at D-R Electric Appliance Sales and Service just up the street to look at refrigerators.  We bought our new gas range/stove from them last September.  They had a 16 cubic foot top-freezer GE (GTE16GTHxx) whose dimensions looked like they might work.  With the doors removed it was under 26″ deep so it would fit through the door of the bus sideways.  It is available in white, black, and stainless steel.  Kurt Richards helped us and said he would search the units he can order if I give him the dimensions of our enclosure.  D-R Electric Appliance is not a dealer for Fisher and Paykel so we would have to get one of those through Lowe’s if we decide to go that route.

Lowe’s was our next stop.  Linda looked at plants but decided not to buy any on this trip.  We picked up a couple of 40 W appliance bulbs for the microwave as one of the two bulbs that lights the top of the range burned out the other day.  I picked up a new face shield, dust masks, a Tyvek jump suit, a floor chisel with shield, and a 3-pound short-handle sledge hammer.

Teeko’s Coffee and Tea is kitty corner from the Lowe’s/Walmart shopping center so we stopped there and ordered one pound each of our three half-caffe blends: Sweet Seattle Dreams (Seattle Blend + Sweet Dreams decaf blend); Ethiopian Yirgacheffe, and Cafe Europe.  Jeff wasn’t there but his mom (Mary) took our order and his dad (John) was starting to put together the roast when we left.  I will pick the beans up tomorrow afternoon.

By the time we got back to the house it was time for lunch so Linda fixed grilled “cheese” sandwiches.  She is still using up the non-dairy cheddar cheese we bought a while back.  It is not Daiya brand and it does not taste like cheddar.  Actually it doesn’t taste like much of anything.  Keith was there mowing the yard as we thought he might be.

Me in the Tyvek jumpsuit removing the black ceramic floor tiles. (Photo by Linda.)

Me in the Tyvek jumpsuit removing the black ceramic floor tiles. (Photo by Linda.)

[p1 L] It was once again 1 PM by the time I got to work in the bus removing the black ceramic floor tiles.  I suited up and Linda took a couple of photos.  I was over dressed under the Tyvek jumpsuit so I changed into something cooler.  Even then it was a hot, sweaty afternoon.  Houses get wrapped in Tyvek to prevent air movement between the interior and exterior, so a jumpsuit does not really breathe.  Neither did I with the dust mask in place so I settled for my wrap-around safety glasses, full face shield, Tyvek jumpsuit, and leather gloves.

I had hoped to get most of the floor tiles out intact.  They are nice 12″x12″ black ceramic with a hint of silver flake in them and they were probably expensive when they were installed in the bus in 1990-91.  They were installed just the way they would be in a house, on a troweled bed of thin set mortar, with one difference; they were set directly on the factory original plywood subfloor of the bus rather than on an underpayment layer.  The information I found online this morning indicated that removing tiles installed this way might require removal and replacement of the subfloor.  That is not an option in the bus so I was curious, and a bit nervous, to see how they would come out.  The other caution was to NOT smash them with a sledge hammer to break them into smaller pieces for easier removal, even though there are lots of websites that tell you to do this.  Ceramic tiles with a high quartz content will shatter sending tiny razor sharp shards flying in every direction; thus the Tyvek jumpsuit, face shield, and gloves.

I took a few tiles out yesterday and most of them came out intact.  The first few today, however, came out in two or more pieces.  Either way I was committed to removing them, so I kept at it.  I developed a technique that seemed to work more often than not.  I would chisel along one free edge and when I got the first indication that the tile was loosening I would switch to an adjacent free edge (if there was on).  Proceeding in this manner I was able to work my way down a row getting most of the tiles loose in one piece.  The tiles were laid in rows with aligned joints running across the coach and staggered joints running the length of the coach.  Thus the rows were short and easier to work on, my work was interrupted by something I will describe next, but I returned to the task and removed the tiles from the entire kitchen/dining area back past the refrigerator.  This part of the deconstruction will take a while but based on the progress I made today it will not take as long as I thought it might, all things being equal (which they never are).

While I was working Keith came to the bus in need of some assistance.  His zero-turn Hustler mower had quit moving and started smoking and was stranded in the northeast corner of our yard.  This particular mower is all hydraulic; the gasoline engine simply turns a hydraulic pump and fluid pressure is used to drive/steer the mower and turn the cutting blades.  Keith had oil on his arms and needed some paper towels.  He suspected a hydraulic hose had failed and the smoke was from the hot oil.  The immediate problem, however, was to get the mower back into its trailer some 400 feet away.

Keith got the mower stuck once last year in wet/soft soil along the north property line.  I was able to use our Cub Cadet lawn tractor to pull him out then so we figured we would try that again.  Just this past weekend I had charged the starting battery and moved the lawn tractor outside to make room in the garage for the furniture we took out of the bus.  It complained for a moment and then started up.  Keith had tow straps so I drove it over to his mower and we hooked the straps to the trailer ball on the back of the lawn tractor.

Keith’s mower weighs 1,200 pounds.  I doubt that our Cub Cadet weighs half that much even with me sitting on it.  I was able to pull it part way across a level-to-slightly-downhill part of the yard but once we hit an upslope my back tires started to slip.  Keith went to get Linda because the lawn tractor would stop if I got off and I was too far from the house to conveniently jump start it.  I continued to drive while Linda helped Keith push although we should have figured out a way to trade places.  It was very hard work for them but the Cub Cadet proved to be “the little engine that could” and we got the mower down by the third culvert (where the driveway for the barn is supposed to go).  We chose that location because it was downhill and close to Keith’s truck and trailer.

Keith’s trailer has a large rear ramp and pointed front like the bow of a boat with smaller ramp that opens at an angle on the driver’s side.  I tried pulling his mower up the rear ramp into the trailer.  The plan was for me to drive out via the front ramp.  Unfortunately the Cub Cadet could not maintain enough traction.  We unhooked it and I drove out the front and put it back in its parking spot.  I got a pair of wheel chocks from our bus and placed them in front of the trailer wheels while Keith unhooked the trailer from his truck.  He then attached the tow straps to the trailer ball on his truck, brought them I through the front ramp opening just off the nose of the trailer, and tied them around the front frame of the mower.  It took a few tries, and one repositioning of the strap on the mower, but Linda and I were finally able to guide it into the trailer while Keith pulled it up the ramp with his truck.

Linda got water for all of us while I helped Keith reload the trailer.  Keith is retired and doesn’t mow lawns for the money.  He’s a good guy who charges us a very reasonable price for the service he provides and we were glad to help him get his mower back in his trailer so he could go home, take a shower, and have a cold beer.  We should have done the same, but he probably took the trailer someplace to have the mower fixed and we both went back to what we were working on.

By 4:30 PM I was too warm and too sweaty to remove any more tiles.  I was also at the point where I was starting down the hallway and needed to remove some quarter round base molding that was installed over the edge of the tiles.  Tomorrow I plan to work earlier in the day when it is cooler, but I say that every day.

Linda cooked most of our dinner on the outdoor grill using the grilling mat to cook potatoes, zucchini, and Japanese eggplant that had been sliced in half lengthwise.  She also made Farro and served it as a side dish.  I think that is the first time she has done that; she normally uses it as an ingredient.  While the vegetables were grilling we sat quietly on the back deck enjoying the last of the first bottle of 2013 Egri Merlot we bought at Whole Foods last week.  The robin eggs in the nest under our deck have hatched so we are trying not to disturb the parents too much.  They need to fly back and forth constantly to feed their young but are understandably weary of us.

I had a call after dinner from Darin Hathaway, the Aqua-Hot technician who worked on our unit in June 2014.  It appeared to have an intermittent ignition coil then and would not fire at all when I had the bus a Butch and Fonda’s in the fall.  Butch and I replaced the burner in October 2014 with the one I bought from him.  That burner was running rich until I replaced the blower bearings while we were in Quartzsite.  Old bearings = slow fan speed = inadequate air supply = rich air:fuel ratio = inefficient combustion and sooty/smoky exhaust.  I still need to repair the original one but for now that is not a priority.  Darin said he could bench test/repair it but Lloyd DeGerald has the same capabilities.

Butch had eye surgery this morning at a clinic in Indianapolis.  I will call tomorrow and see how he is doing.  Linda is having a girl’s day out with our daughter tomorrow, Jack will be here to clean the carpets on Wednesday, Linda has to go to the bakery on Thursday, and I have to take the cats to the veterinarian Thursday afternoon.  I also expect Keith will return sometime this week to finish mowing the grass.  Saturday morning will be our usual ham radio club breakfast and Linda invited Steve and Karen for dinner on Saturday.  Somewhere in there we will probably go look at the Chevy Colorado (GMC Canyon), Toyota Tacoma, and the Subaru Forrester and Outback.  In between all of that I will be doing a load of laundry or two, working on the bus floor, and trying to figure out refrigerators, furniture, and wall treatments, so it is shaping up to be a busy week.  Heck, it’s going to be a busy summer, and maybe a busy fall.

 

20150411-15 (S-W) NM, TX, OK, AR, MO

Leave a reply

[Note: There are no photos for the five days covered in this post.]

2015/04/11 (S) Relaxing Chores

We like to get up and go do things, but we also like not having to get up and do things.  Today we got up when we were ready to.  I used up the last four scoops of coffee beans from our first three pounds and opened the next/last three pounds; one each of Sweet Seattle Dreams, Cafe Europe, and Ethiopian Yirgacheffe.  Each of these is a half regular, half decaffeinated custom blend that Jeff at Teeko’s Coffee and Tea in Howell, MI makes for us.  Linda installed iOS 8.3 on her iPad while I made the coffee.

We had toast and jam for breakfast using some more of the English toasting bread we bought at Smith’s the other day.  After breakfast Linda played several of her word games, including Words with Friends, online with Karen.  I installed iOS 8.3 on my iPad and then worked on yesterday’s blog post and e-mailed it to myself.  (It is still the easiest way for me to get it from my iPad to my laptop, which somehow just does not seem right.)

Mid-morning Linda started cleaning the coach.  We have been in dusty environments for a lot of the winter, especially the last few weeks, and the coach needed a good vacuuming.  We don’t vacuum as often as we would if we did not have the cats with us as the vacuum is rather loud and they are afraid of it.  They do not like the vacuum cleaner at home either but they can get a lot farther away from it and have a lot more places to hide in the house than they do in the bus.

While Linda worked on the interior of the bus I got out the water softener, pre-filter, and hoses.  I first connected everything so I could run water through the pre-filter to remove any sediment and then backwards through the softener to back flush the resin bed.  I then connected the hoses in the normal forward flow direction and added 26 ounces of non-iodized table salt to the captive filter housing on the inlet side of the softener tank.  I no longer use this housing for a filter.  Its sole purpose is to hold salt for regenerating the softener.  That way I do not have handle a wet filter while trying to keep it clean so I can reinstall it.

The regeneration procedure was the same ordeal it has been all winter, taking a few minutes of my time spread out over several hours.  Most of that time I worked on blog posts and photos, but my work was interrupted every 20 to 30 minutes to attend to the softener.  I did, however, manage to get the water coming out of the softener to finally test at 1.5 gpg TH.  That should be enough softening capacity to get us home without having to regenerate the water softener again.

For dinner Linda made a barley, split pea, and lentil dish with sautéed vegetables and a hint of soy sauce.  It was very tasty.  We had the TV on the local PBS station and I finished my consolidated blog post and image gallery post for the week of the Escapade rally and uploaded them to our website/blog.

2015/04/12 (N) Edgewood, NM to Amarillo, TX

Today was a travel day and we normally skip breakfast and coffee on such days, but not today.  I was up a little after 7 AM and we did not plan to leave until 9 AM so we had time to make, consume, and digest some coffee and toast.  I turned off the electric heating element for the Aqua-Hot and turned on the diesel burner and engine pre-heat coolant circulating pump.

When we were done with breakfast we got the Dewalt air compressor out of the car and checked all of the tires on the bus and the toad.  It turned out that all of the pressures were slightly higher than where I normally set them, due in part to our altitude of 6,700 feet ASL, and that was want I wanted.  In driving from the Route 66 RV Park in Edgewood, New Mexico to the Overnite RV Park in Amarillo, Texas we will drop just over 3,000 feet in elevation.  That, in turn, will cause the cold pressures in the tires to drop.  The current cold pressures in the tires should be sufficient to allow for that, but I will check the TireTraker monitor in the morning to be sure.

By the time I finished checking the tires Linda had the interior ready for travel.  We hooked up the car, set the car to be towed, switched on the bus chassis batteries and engine accessories air supply, checked the lights, turned off the Aqua-Hot burner and engine pre-heat coolant circulating pump, started the bus engine, and switched the Level Low system to drive mode.  A few minutes later the chassis air system was fully pressurized and the coach suspension was at ride height.  We exited our site easily, pulled out of the RV Park onto Historic Route 66 westbound, and a mile later made two right turns and accelerated onto I-40 eastbound.

Once we were underway Linda called the Overnight RV Park in Amarillo, Texas to make sure they had open sites.  They did, but not many so she gave them our name to hold a pull-through site that would accommodate our bus with the car attached.  Since we are just staying one night we do not plan to not unhook the car.

We knew from our maps and what we could not see to the east that we were done with the Rocky Mountains.  We were now in the Great Plains and would be from here all the way through Oklahoma.  Not that the terrain was flat; eastern New Mexico was rolling terrain, occasionally steep, with mesas.  Not surprisingly the terrain did not change abruptly as we crossed into Texas, although the road surface and time zone did.  For lack of a better, or more official, line of demarcation I consider the central time zone as the boundary of the middle-west.

While not as dramatic as the mountain west the Great Plains are a place where grasses and low brush dominate a natural landscape that is largely devoid of trees and that have a beauty all their own.  The other thing we noticed as we moved east was the thickening cloud cover and occasional storm clouds and virga.  Linda had checked the weather forecast so we knew there was a low, but non-zero, chance we would encounter rain while driving and/or after we got parked for the evening.  We did, in fact, drive through a couple of miles of very light rain somewhere near the New Mexico / Texas border.

We only stopped once for a bathroom/stretch break and made very good time.  The posted (maximum) speed limit for most of I-40 in both states is 75 MPH.  Back east I typically limit my speed to 62 MPH or less if the speed limit is lower.  What I have discovered out west is that the bus really likes to travel at 68 MPH turning just under 2,000 RPM and so do I, at least out here in the wide open spaces.

Linda had selected the Overnight RV Park in Amarillo for several reasons.  For one, the name and description strongly suggested that this park was set up to accommodate overnight visitors passing through the area in their RVs and looking for a place to spend the night.  For another, it was on the east edge of Amarillo, so we will not have to drive through town in the morning when we pull out.  Finally, it was right across the street from a Pilot Truck Stop, so we did not have to make a separate stop for fuel.

We pulled of I-40 at exit 75 around 2:30 PM CDT and pulled in to the truck stop.  The place was crowded with trucks but we got lucky and pulled in behind a semi that was done fueling and pulled out shortly thereafter.  There was some confusion regarding the pump number so it took a bit longer than usual to top off the tank, but we were not pressed for time as our RV park for the night was right across the street.  Linda settled the charge and we followed several tractor-trailers to the exit, back to the main road, and then turned north and drove the short distance up to the entrance to the RV Park.  We turned in and stopped by the office where Linda got us registered.  As is the case in most RV Parks we got a map of the campground with our site and entrance path marked, the login for the Wi-Fi, and the combination lock for the bathrooms.  We also received information about where to go and what to do in the event of violent weather.  Welcome to the Midwest and Tornado Alley.

Overnight RV Park is an older park with a lot of long-term residents, but it was not run down and had some nice, mature trees and plants.  I was momentarily concerned about low overhanging branches and tight turns when we pulled in but the gravel interior roads were wide enough, and the trees trimmed enough, to make access to our assigned pull-through site very easy.  I did, however, lift the tag axle to allow for the tighter turns.

We went through our normal arrival routine, got connected to the Internet, and started looking at our RV park options in the greater Oklahoma City area.  We plan to stay two nights and take part of our one full day to visit my Uncle Bob and Aunt Helen who live in Norman just south of OKC.  I had not contacted them, however, as our travel plans have been very fluid.  Now that we were a day’s drive away I called to let them know we would be in the area.  I was a bit surprised that Helen answered the phone and even more surprised to learn that Bob was in “rehab” although Helen did not say why.  She did say that we could visit him so we arranged to go to their house on Tuesday morning at 10 AM, get the address/directions to the rehab facility, and possibly take Helen with us to go visit him.

I texted my sister and niece to let them know that Friday from lunchtime to dinnertime would work well for us and accommodate their availability.  Linda texted our children to let them know we had landed safely in Amarillo and then texted Marilyn to share the same information.  Marilyn called back a bit later and Linda filled in the details.

The RV Park options around OKC were limited, which seems to be typical of urban areas including St. Louis, Missouri.  The options also seemed to be less than ideal based on reviews and expensive by our standards.  In the end we decided to try the Cleveland County Fairgrounds in Norman.  We sent a message via RVillage to someone who is currently there in a 42′ motorhome and inquired about the place.  They wrote back and said it was fine but was near full, does not take reservations, and only has 30A electrical service.  All of that was fine by us.  The pluses are that it is only a few minutes from my Aunt and Uncle’s house and it is only $20 per night, so we are going to leave early tomorrow and see if we can snag a spot.

inda re-heated some leftovers for dinner, after which we went for a stroll around the RV park.  We had just exited our coach and got into a conversation with our neighbors to the north.  They were working on errands so after a good chat we left them to their work and went on our walk.  Getting out and moving around in the cool, fresh air was just what we needed after a long day of sitting and driving and invigorated us enough to stay up until 9 PM.

2015/04/13 (M) Amarillo, TX to Norman, OK

The weather forecast did not favor travel during any particular part of the day; it was going to be rainy and windy regardless of when we left.  Getting a spot at the Cleveland County Fairgrounds, however, might depend on getting there early.  We targeted an 8 AM departure for our 4.5 hour, 270 mile trip.  We were up at 7 AM and each had a cup of tea and a banana.  We did not unhook the car last night, so all we had to do was run it through the towing procedure and it was ready to go.  We pulled out of our site at 8:20 AM.

Our route today was I-40 east to I-35 south to US-77 south to East Robinson Street.  All but the last 20 miles was on I-40 which mostly ran east to northeast.  Winds were 15 – 20 MPH and gusty out of the northeast the whole way.  That meant I almost always had a headwind component and often had a crosswind component.  The headwind requires the engine to work harder so I set the cruise control at 64 MPH instead of the 68 MPH I ran most of yesterday.  The crosswind component meant I had to actively work the steering and the lower speed made that more comfortable as well.

Most of the trip was through rural countryside with good road surface and light traffic.  We encountered a few construction zones but there was no work being done due to the weather.  As we approached the Oklahoma City metropolitan area traffic became much heavier, as expected, but the highways had more lanes and everything seemed to move along just fine.  In particular I-40 and I-35 always had at least three lanes allowing me to stay in the center, away from entering traffic, and move to the left or right as needed for an exit ramp.  The whole drive would have been easier without the rain and constant fiddling with windshield wipers, but I was always able to see well enough to maneuver safely, it was just more work and bit more stressful than normal.  I seem to handle urban road systems OK; it’s just not my favorite thing to do.

The Cleveland County Fairgrounds was easy to find and easy to access.  As soon as we pulled in we could see where the RVs were parked.  I pulled up out of the way while Linda called the Fairgrounds office.  She was told to go ahead a find a place to park and then register at the kiosk or in Building G.  I pulled up into the gravel parking area that had the RVs backed along two sides, like an “L.”  One leg of the L was paved and the other was grass/gravel.  We noticed one empty site in the paved area so I pulled around in front of it (so no one else could take it) while we unhooked the car.  (When camping in a no-reservations, first come, first served campground you have to stake your claim to an empty site.)  Linda moved the car out of the way and then spotted the rear end of the bus while I repositioned it and then backed it into site #9.  We have been towed out of two fairgrounds at the end of rallies where it rained so we were glad to get this paved site.

The sites here are all full hookup with 30 A electric and include usable Wi-Fi for $20/night.  That is a much better deal than anything else we could find in the OKC area, and is also the closest place to where my aunt and uncle live, so it was a great find.  We probably won’t use the fresh water or sewer connections and the 30 A service will be OK.  Apparently there are also some 50 A sites but we did not need that much power and did not want to take the time to see if one of them was open.  Given forecasted high temperatures that will barely reach 60 degrees F we will not need our air-conditioners.  As for heat, we will use our Aqua-Hot in diesel-fired mode for domestic hot water and space heating, if needed.

Once we had the power connected and got settled in I made a pot of coffee while Linda made roll-up sandwiches for lunch.  She then checked us in to the Fairgrounds on RVillage and made our reservation for the Red Barn Rendezvous RV Park near Edwardsville, Illinois starting on Thursday.  We will be in the St. Louis, Missouri area for four or five nights visiting family before pushing on to Twelve Mile, Indiana.  She then researched places to stay near Joplin and Springfield, Missouri for Wednesday evening.

While Linda was doing all of that I finished up yesterday’s blog post and started working on this one.  I then logged-in to RVillage.  There are three other RVillagers checked in to the CCFG so I posted to the home feed and to the park feed to see if I could make contact with any of them.  One of them (Hollywood Bob) is also a member of the SKP Photographers BOF which Linda and I help run.  (I am the owner/leader of the RVillage Group.)  I sent him a friend request and then a personal message.

The rain let up not long after we arrived at the Fairgrounds but the wind continued, with gusts occasionally rocking the bus.  The bus is fairly massive but also has a lot of surface area and sits on air springs.  We do not have leveling jacks, so strong/gusty winds can, and do, rock the bus.

Hollywood Bob and his girlfriend Barb walked by so I went outside to chat with them briefly and we arranged to walk over to a local coffee shop at 8 AM tomorrow.  I then spent the late afternoon and early evening editing the text for my March 13th blog post on our visit to the Sonoran Desert Museum west of Tucson and then worked on selecting photos for the post.  Somewhere in there we took a break and went for walk around the Fairgrounds.  It is not a large facility but has nice buildings and grounds.

Linda heated up the last of the barley and vegetable leftovers and steamed some halved Brussels sprouts and finished them with a White Peach Balsamic Vinegar Glaze from the Queen Creek Olive Mill near Arizona City, Arizona.  Yum.  After dinner we turned on the front TV and tuned in PBS to watch Antiques Roadshow.  I finished selecting and processing photos for the March 13th post around 11:30 PM but did not upload it

2015/04/14 (T) Bob and Helen

I was up at 6:30 AM and uploaded my blog post for March 13th.  We had spent that day at the Sonoran Desert Museum west of Tucson, Arizona and photographed the sunset from nearby Gates Pass.  The post was brief (by my standards) but I put over 30 photos in an image gallery.

At 8 AM we walked over to Hollywood Bob and Barb’s rigs, met up with them, and then walked the short distance to the Dora Marie Bakery and Coffee Shop just across Porter Avenue from the Cleveland County Fairgrounds.  We sat there conversing over coffee until 9:45 AM, mostly about RVs and RVing as that is generally the first and easiest conversation to have with new friends.  I already knew from a brief chat with Bob yesterday that both of them are members of the Escapees RV Club and that Bob is a member of the SKP Photographers BOF.  Bob is also a Freethinker and knew that we were as well from our RVillage Profile.  We found out over coffee that they are both members of the WINs (Wandering Individuals Network) and LoWs (Loners on Wheels) which are independent groups for single RVers.  As we were walking back to our rigs we agreed to get together for SKP happy hour at 4 PM.

Our main reason for being in Norman, Oklahoma was to visit my Uncle Bob and Aunt Helen.  Uncle Bob earned a Ph.D. in micropaleontology over 60 years ago when Ph.Ds. were less common than they are now.  He moved to Oklahoma after finishing his degree and did extensive work on the Arbuckle Mountains.  A Google search on “Robert O. Fay” produced a lot of hits referencing his published work.  He was attached to the University of Oklahoma at one time and that is what brought them to Norman.

Bob just turned 88.  He and Helen have been married for 49 years but never had children.  Helen had one son, Scott, from a previous marriage.  Scott married Linda and they had two children, Tiffany and Philip.  Scott passed away a while back but Linda still lives in Norman and teaches in OKC.  Tiffany and Philip and their families also still live in Norman.

I last saw Bob and Helen four years ago on the drive back to Michigan from Livingston, Texas where I had picked up our Honda Element from Dennis and Carol Hill.  Helen was having problems with her back at the time but Bob was as sharp as I remembered the last time I saw him 26 years earlier while returning from a trip out west with Brendan.  All of our memories of that visit were a bit vague but my recollection is that Meghan and my sister, Patty, met us there so Patty must have driven Meghan to OKC from St. Louis, Missouri.

When I called on Sunday to let Bob and Helen know we would be in the area I talked to Helen and found out that my uncle was in a rehabilitation facility not far from the house but she did not say why.  When we arrived at their house at 10 AM this morning we were greeted by Tiffany, Brandy (Philip’s wife), and Helen who was up walking around and sharp as ever.  We visited briefly and then followed Tiffany and Helen over to the rehab facility.

Uncle Bob is in the facility recovering from a persistent pneumonia, which was treated with an antibiotic to which he was allergic, but he also has Parkinson’s.  He is still coherent but the decline in both his physical and mental condition was striking.  I was not shocked by that, however, and only briefly surprised by virtue of not being fully prepared.  We had a conversation nonetheless, and Bob asked, and talked, about family and genealogy which became his research passion along with geology.  Tiffany took a cell phone picture of Linda and me with Bob.  She had to get back to work so she took Helen home while Linda and I stayed a bit longer to chat with my uncle.

Bob was tired, dozing on and off, and it was getting close to lunchtime.  Staff also needed to check on Bob so we took our leave.  Although we will be back this way in future years I had the strong sense that Uncle Bob is not going to improve going forward and this may be the last time I get to see him.  It was not quite the meeting I had envisioned, but I was glad for what we had.  My dad will be 90 in June and cannot travel very far from his home so I don’t see any way he and his brother will ever meet again.  There is always a final everything but it is usually only clear in retrospect.  Such is life.

Before Tiffany and Helen left Tiffany called her mom (Linda) to see if she could be available to get together after work this evening.  Linda said she could rearrange some things with her brother and would love to meet for dinner.  We discussed meeting at the house and going out to dinner from there.

Tiffany invited us to stop by her school, which is just down the street from the Fairgrounds, so we did that right after lunch, which consisted of a couple of tofu hotdogs wrapped up in soft tortillas with mustard and relish.  Not WFPB but definitely vegan and definitely tasty.  Tiffany gave us a tour of her school and we got to meet Cody, her significant other, who also works at the school.  She had talked to her mom (Linda) and Helen and they decided that we would all be more comfortable and better able to converse at the house.  We explained how we eat and Tiffany said she and Brandi (Philip’s wife) would take care of bringing in food and make sure there were items for us.

I spent most of the afternoon working on blog posts but took time out to check the pressures of the two front bus tires.  I thought I would have to adjust all of them now that we have descended to 1,200 feet ASL, but the front tires were still close to one another and above the minimum required pressure, so I did not get out the compressor.  By 3 PM I was feeling the need for a nap and snoozed for an hour.

We walked over to Barb and Hollywood Bob’s rigs at 4:30 PM.  We were going to do SKP happy hour at 4 PM but we were not sure we could carry glasses of wine around the Fairgrounds so we went empty handed.  The Farmers Market opened at 4 PM so Bob, Linda, and I walked over to check it out while Barb started preparing their dinner.  They had to be at a dance event at 6 PM and we needed to be at Uncle Bob and Aunt Helen’s house around the same time.

Brandi has been Uncle Bob’s primary caregiver when he is at home and she brought him from the rehab facility to the house for the evening.  There was a houseful of people with laughter and energy and it was nice to see Uncle Bob and Aunt Helen surrounded by so many people who obviously love them and care about them.  Dinner was salad greens, vegetables, fresh fruit, sandwich fixings, and deserts and there was plenty for us to choose from.  Here’s how the family fits together:

  • Bob is my father’s younger/only brother (by two years).
  • Helen had one son, Scott Pelton, from a previous marriage.
  • Scott married Linda and they had two children; Tiffany and Philip.
  • (Scott passed away some years ago.)
  • Tiffany has three girls (young ladies); Alexis, Brianna, and Caitlin.
  • Brianna has a son, Liam, who is Bob and Helen’s great-great-grandson.
  • Philip married Brandi and they have three children; Cassidy, Cheyenne, and Danika.

We stayed until almost 9:30 PM and had a great visit that ended with a discussion about Linda and her three grand-daughters coming to Michigan for a visit sometime.  Tiffany texted me the cellphone photo she took of Linda, me, and Uncle Bob at the rehab facility this morning.  Caitlin set up a camera and took photos of the entire group.  When we got back to our rig I replied to text messages and provided our e-mail address and home phone number to Helen and Tiffany.

2015/04/15 (W) Norman, OK to Carthage, MO

There is always way more to do in any given area than there is time to do it, and the greater Oklahoma City area, including Norman, is no exception to that.  But our presence here proved to be the catalyst for a large gathering of people to whom we are related by marriage through Helen, my only Aunt, and only by virtue of her being married to my only uncle, Bob.  While it would have been nice to visit longer after last night’s gathering it would have been anti-climactic.

Through the serendipity that RVillage makes possible we also made the acquaintance of Barb and Hollywood Bob at the Cleveland County Fairgrounds.  As much as we would have liked to have coffee with them again this morning, we don’t usually have our morning coffee on travel days and wanted to be on the road by 9 AM.

Linda had been checking the weight restrictions on the roads in our home county and noted yesterday that they will be lifted on the 16th.  That means we have a green light to return to our house whenever we want to.  We already have plans to spend four nights near St. Louis, Missouri and visit family, and at least a couple of nights in Twelve Mile, Indiana visiting Butch and Fonda with whom we started this southwestern adventure on November 30th, 2014.  We will spend our final night at the Camp Turkeyville RV Park so we can dump our holding tanks before arriving home.

All of which is to say we had over 600 miles to travel from Norman to St. Louis, which is two day trip for us, with a reservation at an RV Park in Edwardsville, Illinois starting Thursday afternoon and arrangements to visit with family on Friday, Saturday, and Sunday.  Linda researched possible intermediate locations to split the distance roughly in half and found the Coachlight RV Park on I-49 one mile north of I-40 near Carthage, Missouri.

We did not take the time to buy an Oklahoma Turnpike pass and decided not to take I-44 northeast out of OKC.  From the CCFG we headed west on Robinson Street back to US-77 north, merged onto I-35 north, and then exited onto I-240 east.  Somewhere east of OKC I-240 ended and merged into I-40.  As urban highways go it was an easy exit from the greater OKC area.  We stopped at a rest area just before crossing the Oklahoma/Arkansas border and took a short lunch break, having vegan cold cut rollup sandwiches.

We continued east on I-40 to Fort Smith, Arkansas and then headed north on I-540, which has been re-signed I-49, through the Boston Mountains toward Fayetteville and Bentonville, the corporate home of Wal-Mart.  I-49 did not continue all the way into Missouri and became US-77 as it passed through a narrow valley and small towns.  A few miles into Missouri the road became I-49 again.  We stayed with I-49 up to where it joins with I-44 east near Joplin, Missouri.  About 10 miles later I-49/US-77 split off to the north and one mile later we exited, crossed over the Interstate, and pulled into the Coachlight RV Park.

The weather was overcast with occasional drizzle for the entire trip but it was a beautiful drive nonetheless.  Eastern Oklahoma is green and rolling and northwest Arkansas adds small mountains to that topography.  The bus ran well all day including the steepest grades.

The Coachlight RV Park is located behind the Coachlight RV Dealership with very easy access.  Linda got us registered but then we had to wait quite a while for someone to move the motorhome in front of us.  Again, we were given instructions on where to go and what to do in the event of extreme/violent weather.  The Park is built into a north-facing slope with wide paved roads behind an RV dealership of the same same.  The RV dealership was the emergency shelter.  Most of the sites are pull-through except along the two outside edges.  All of the sites are wide, long, and level gravel with full hookups including cable TV and Wi-Fi.  The Park has its own well with a water softener so the water at the sites is very soft.  The Park allows customers to wash their rigs so we got out the hose, spray nozzle, and long-handled soft brush and rinsed off the car and the bus as best we could.

We went for a walk around the Park to stretch our legs and stopped by the office to check out the meeting room.  There is a small RV rally here and we got to see the meeting room which was very nice.  For dinner Linda made a macaroni and mushroom dish with onions, garlic, and kale followed by red grapes.  Very tasty.  We watched a few TV shows and called it a day.

 

2015/02/19-23 (R-M) Solo in Q

Leave a reply

2015/02/19 (R) Over-Cranked

I have been busy cleaning/waxing the outside of the bus and writing articles so I have not been able to spend much time writing my blog posts or uploading them to our website.  A couple of weeks ago I uploaded the posts through the end of December 2014 but then we got busy and I have not uploaded anything since then.

Here is how my day went.  I Got up at 7:30 AM and had granola with fresh blueberries for breakfast.  It was cloudy and cool most of the morning, so I tried to focus on the bus cleaning/waxing and was able to clean and wax the passenger side of the bus from the front to the back edge of the dinette fixed window.

Another dramatic sunset reflected off the recently waxed driver's side of our coach.

Another dramatic sunset reflected off the recently waxed driver’s side of our coach.

The whole house generator at home runs a self-test every Thursday at 11 AM (EST) and e-mails its status to us.  Instead of getting a message at 9 AM I got one at 9:10 AM (MST).  The message was an Over Crank fault indicating that the Genset had failed to start, had dropped out of Auto mode, and would not attempt to restart until the controller was reset to clear the fault.  I did not assume that Linda had paid any attention to the details of the message so I called her.  She called Bratcher Electric and they told her how to reset the controller.  They also said they had received similar notifications/calls from other customers.  Sure, the temperatures have been below negative 10 degrees F, but the whole reason we have the generator is to protect us against power loss which usually occurs under the worst weather conditions.  The service technician is coming out on Wednesday to check the unit, which is still under warranty.

I took a lunch break at 2PM and had a jumbo tofu hot dog and some hummus with a few Fritos corn chips.  For most of the rest of the day I worked at my laptop selecting and editing photos for my Quartzsite 2015 BCM article.  I made a quick trip to the Road Runner market for some 26 ounce containers of salt and stopped at Herb’s Hardware store looking for a clear filter housing, but they did not have any.

I made a nice, large salad for dinner and finished up the box of Franzia Refreshing White wine.  I continued to process photos for my article late into the evening, taking an occasional break to check e-mail and check out the SteelMasters website.  They sell steel Quonset hut style building kits and this might be a more economical way to build our bus barn, and easier as a do-it-ourselves project.

2015/02/20 (F) Touch of Oranges

I was up late last night so I slept in until 8 AM this morning.  I awoke to cloudy skies and cool temperatures so I skipped breakfast and got right to work cleaning/waxing the passenger side of the bus, which faces south and gets a lot of sun.  I have been working front to back but decided to reverse direction.  The reason was to do as much of the side aft of the patio awning as possible while it was cloudy.  The area under the patio awning is shaded (by the awning) so I can work there anytime I feel like it.

Butch was working on their new VDO electronic speedometer and needed to borrow my air-over-hydraulic bottle jack so I dug it out of the front bay for him.  Mid-morning Lou and Donna Rice stopped by to say “hi.”  They were in town looking for newspapers that Lou could use to mask off their motorhome so he could spray some paint.  It just so happened that there was a large box of newspapers over by the trash container and they were able to get all that they needed at our campsite.

The sunset in Q backlights Saguaro cactus, a palm, and a Palo Verde tree.

The sunset in Q backlights Saguaro cactus, a palm, and a Palo Verde tree.

I quit cleaning/waxing around 11:45 AM and turned my attention to the water softener.  I have regenerated it twice this week, first with solar salt and then with non-iodized table salt, but the water coming out of it is still testing in the 3 – 7 gpg range.  A reading of 7 is considered ‘hard’ so at this point I am not very happy with our water softener.

I filled the filter housing with yet another 26 ounces of finely ground non-iodized table salt and started the regen process for the third time this week.  This time I ran the water more vigorously for a short time and then slowly (two minutes per gallon) and checked for salty water from the outlet of the softener.  When I got very salty water I shut off the flow and let it sit for an hour.  I repeated this a couple more times.  When I took the filter housing off there was very little salt left in the bottom.  I rinsed it out, reinstalled it, and ran water through the unit at the rate of four minutes per gallon for one hour, figuring 15 gallons of filtered water should be enough to flush the saltiness out of the softener.  I tested the discharge water from the softener and it measured somewhere between zero and 1.5 gpg TH.  It should have been zero, but I do not know if the test strips are sensitive to residual salinity.  This process took all afternoon, intermixed with my computer and bus waxing work.

I had granola with fresh blueberries for lunch and then finished yesterday’s post and started this one.  I settled in to work on photographs for my article with periodic breaks to check the water softener.  It was more sunny than cloudy from noon to 2 PM at which point the clouds thickened and filled in.  The air was warm but not hot and the conditions were ideal for cleaning/waxing the “sunny” side of the bus.  That is what I did until 5:45 PM, with a short break to talk to Linda on the phone.  I should be able to finish the waxing tomorrow, put a second coat of Carnu-B Coconut Creme on the passenger side tires, and put a first coat on the driver side tires.

I cleaned up all of my supplies and materials, washed up, and had a few corn chips and hummus as an appetizer.  I washed some red grapes for later and got out an orange.  I have a lot of grapefruit and oranges on board at the moment and try to at least one of each every day.

This was a very dramatic sunset.

This was a very dramatic sunset.

Speaking of oranges, Barb has been using a pair of products from Touch of Oranges; Touch of Oranges Wood Cleaner & Re-conditioner, and Touch of Beeswax Wood Preserver; http://www.TouchOfOranges.com.  I went to their motorhome yesterday to see how it works and the results were quite impressive.  I thought about ordering some but decided not to for several reasons.  For one, we already have Murphy’s Oil Soap Wood Cleaner on board.  It has orange oil in it and I would like to do a side-by-side test.  For another, we are getting too close to our departure date to risk a delayed delivery.  Finally, we don’t have time to use it before we get home anyway.  I might order some in May if I like the way it works better than the Murphy’s product.

I made a fancy salad for dinner.  We bought a large container of mixed salad greens on Monday and I need to have salad every day in order to use it up before it goes bad.  I found carrots and mushrooms in the fridge that needed to be used, so those went on the salad along with dried fruits, peanuts, Daiya pepper jack “cheese” and other yummies.

I continued processing photos after dinner.  By 10:30 PM I was too tired to concentrate and went to bed.

2015/02/21 (S) Facetime with Madeline

I was awake off and on starting at 6 AM and finally got up at 7:15 AM.  The Yuma Hamfest started yesterday and runs through tomorrow but I have too much to do here to spend three hours driving just to window shop.  Besides, Butch had to leave early this morning for a rock and mineral swap meet to try selling some of the equipment they have purchased and decided not to keep.

I did not have coffee yesterday so that was my second task this morning.  My first task was getting the cats their food and water and cleaning their litter tray.  I had granola with raisins and fresh blueberries for breakfast and then sat and enjoyed my coffee while Jasper sat beside me on the couch and groomed himself.

The sunsets in Q were usually good but this one was better than usual.

The sunsets in Q were usually good but this one was better than usual.

It was cool again this morning with a thin cloud layer so as soon as I finished my coffee and checked my e-mail I got to work on the outside of the bus.  That was at 9:15 AM.  It took me until 11:45 AM to finish the passenger side of the bus and apply a coat of Carnu-B Coconut Creme to the driver side tires.

I finished the hummus for lunch with the help of a few Fritos corn chips.  Afterwards I called Jeff to check on our coffee order.  He said it was in the mail but went out a few days later than expected.  He said he expedited the shipping because of that and was supposed to e-mail the USPS tracking number to me.  I then went over to Jim and Barb’s rig and asked if I could test their Touch of Oranges products.  Barb lent me both the wood cleaner/restorer and the beeswax wood preserver along with pieces of terry cloth for each and a piece of 0000 steel wool.  I set those aside and worked on my Quartzsite 2015 article for a while.

I took a break from working at my computer to test the cleaning products.  Following the directions, I sprayed the left side of the kitchen base cabinets with the cleaner/restorer, waited two minutes, rubbed it with steel wool (with the grain), and wiped it off.  I then applied the beeswax preserver with a piece of terry cloth and let it sit for one hour.  While the beeswax product was soaking in I went over and visited with Butch and Fonda.  While I was doing that I got a TXT message from Linda asking if I wanted to Facetime. That meant she was back at the house and had grand-daughter Madeline with her.  I indicated that a little bit later would be better.

My one hour wait was up so I excused myself, went back to my coach, and wiped down the left side of the cabinet.  I then used the Murphy’s Oil Soap Wood Cleaner (with orange oil) on the right side of the cabinet.  The results did not compare favorably with the Touch of Oranges products which definitely improved the appearance of the wood.

I turned on our Verizon MiFi, switched my iPad to it, and then called Linda to set up the Facetime session.  Either I never configured the Facetime app or failed to reconfigure it but it would not let me log in.  Once I got the correct e-mail address and password set up it worked fine.  I called Linda’s iPad and when she answered I got to see Madeline.  When Linda picked her up earlier today Madeline said she was going to grandma and grandpa’s house to see grandma and grandpa.  Linda explained that I wasn’t at the house but Madeline could still see me in the bus using the iPad.  It is a fabulous technology, and fascinating to see how completely natural it is for a 2-year old.

I have enjoyed creating panorama images this winter using MS-ICE.

I have enjoyed creating panorama images this winter using MS-ICE.

Bill Stewart from our FMCA Freethinkers Chapter had requested to see some photos from the recent gathering at the Peg Leg boondocking area near Borrego Springs, California.  Last night I selected seven images, re-sized and processed them, uploaded them to the Freethinkers folder in my Dropbox, generated the “share” link, and e-mailed it to our open forum e-mail reflector.  While I was working on that it occurred to me that Lou Petkus is always looking for images for the SKP Photographers BOF newsletter and member album and I had not sent him anything in a while.  I was too tired by then to do the work so I put that on my “to do” list for today.

I spent most of the rest of the afternoon and evening working on my article and the photos that go with it except for a break to photograph a beautiful sunset.  Linda called around 6 PM (8 PM at home) to chat.  She suggested that we wait to see if someone at Escapade is selling the Touch of Oranges products.  She also suggested that I check to see if Carnu-B is going to be at any car shows near us as they sell the product for a lot less at shows than they do online.

I took a break for dinner and microwaved a jumbo tofu hotdog and a potato.  The potato had started sprouting so I figured I needed to eat it or plant it.  I had been accumulating dishes and utensils for the last few days so I washed, rinsed, and dried all of them.  By the time I finished my chores, played a few games on my iPad, and finished this post it was midnight.  Completing the waxing of the bus was an important milestone, and although I have a lot more to get done on the bus this coming week I plan to take it easy tomorrow and try to wrap up my Quartzsite 2015 article and perhaps some other writing.  The most I may do to the bus is apply some more Carnu-B Coconut Creme to the tires.

2015/02/22 (N) Q 2015

I did not use up the second package of blueberries fast enough and they started to go bad.  I picked out the bad ones, rinsed off the rest, and had some granola with my blueberries for breakfast.  I worked for a little while finishing up yesterday’s blog post and then got to work at my computer.  It was cloudy and windy when I got up and the winds continued to strengthen during the day.  I had closed the vent fan domes last night so I would not have to listen to them rattle.  The patio awning was flapping more than I liked so I got Butch to hold the strap while I released the rafters and then rolled it up and latched it.  I was able to retract the small passenger side bedroom awning by myself.  In the light of day I discovered that I had not wiped the Carnu-B wax off of the body as completely as I thought.  That, however, will be a task for another day.

I wanted to make a sandwich for lunch but I was out of onion so I went to the Road Runner Market to get one.  I also wanted pretzels and hummus.  They did not have any hummus and they did not have the kind of pretzels I like but I was able to get two large sweet onions.  Sourdough bread with Tofurkey brand mock deli slices, Daiya cheddar “cheese” slices, veganaise, honey mustard, fresh onion, and salad greens made a tasty treat.

I finally finished my Quartzsite 2015 article for Bus Conversion Magazine, including the 95 photos and captions, and uploaded it to my Dropbox for proofreading.  I had an e-mail back from Gary indicating that they would probably use it for the February issue, so very late this evening I uploaded all of the photo files.

A panorama created using MS-ICE from handheld images.

A panorama created using MS-ICE from handheld images.

About the time I needed to take a break Fonda left for church and I saw Butch sitting outside with his camera.  Another beautiful Quartzsite sunset was taking form so I grabbed my camera and shirt jacket and went out to join him.  It had been cloudy and windy all day and was rather brisk.  We both worked the sunset until it was played out and got some nice photos considering that they were all handheld in low-light conditions.

For dinner I made a Thai Kitchen Noodle Bowl and added some honey roasted peanuts.  I closed all of the bus windows to a crack and made some hot tea.  Tea is still my beverage of choice with any type of Asian cuisine and was very satisfying on a chilly evening.

With the Quartzsite 2015 article done (except for corrections) I started pulling together the “featured bus” article on Byron Pigg’s 1985 Model 15 Eagle bus conversion.  I went through the photos I took last month of his coach at the Eagles International Bus Rally and was pleased that I had a good variety with good technical quality to choose from.  I made my selections, post-processed all of them, and inserted the small versions into the Word doc.  The article narrative itself was less than one page in length as I do not know very much about Byron and his wife Betty or their bus.  The Word doc template I use for featured bus articles includes two “Specifications” pages, one for the bus and one for the conversion, so the article was three pages.  I e-mailed the Word doc (with embedded photos) to Byron and cc:d Gary at BCM.  In order to complete the article I need Byron to fill in a lot of the details about his bus and conversion.

2015/02/23 (M) Seizure

Toast with apricot preserves is as close as I get anymore to the Danish pastries that were once one of my favorite treats, but I am OK with that.  I am absolutely enjoying retirement more as a result of being much healthier and more active, both of which are a direct consequence of eating better, weighing less, and not having to take a cocktail of drugs every day.  Toast, coffee, and a little fruit juice makes a very agreeable breakfast.

I finished up yesterday’s blog post after breakfast and then got into my computer-based work.  I had planned to work on the photos of Larry and Carol Hall’s GM PD4106 bus conversion and write a brief narrative, similar to the one I did on Byron and Betty’s Eagle bus, but other things kept interfering with the work.  Except for lunch and dinner breaks, and brief chats with Barb, Butch, and Fonda, I sat on my butt most of the day working away at my computer on a template for featured bus articles but had very little to show for it at the end of the day.

I have learned over the years to stick with sunsets until it is dark.

I have learned over the years to stick with sunsets until it is dark.  Panorama stitched together with MS-ICE.

For lunch I had the last jumbo vegan hotdog in the open pack.  They microwave nicely, so they are quick and easy to fix, and are so yummy with honey mustard, pickle relish, and chopped sweet onion.

I had not yet seen the e-mail from Jeff at Teeko’s Coffee and Tea in Howell, Michigan with the USPS tracking number for my coffee order so I call them at noon (2 PM EST) and Mary gave the number to me over the phone.  It only occurred to me much later that the e-mail may have gotten trapped by our spam filter.  I direct all of the notifications from the spam filter to a special inbox and I have not made a habit of checking that inbox or going into the filter to release or delete the e-mails that are being held.

Butch and Fonda drove over to Bouse this morning to talk with the General Manager and park managers of an RV Park about working there next season.  They stopped at our shared P. O. Box on their way back and then went to the main office downtown.  When they got back to camp they had my coffee shipment and an envelope from Dan Fregin, the treasurer of our FMCA Freethinkers chapter.

At one point in the afternoon I looked out the picture window by the dinette, where I sit and work at my computer, and Roho was lying on the ground with Jim and Barb and Jim L. gathered around him.  He appeared to be twitching and Barb confirmed that he was having a seizure and typically has one once a month like clockwork.  We had a dog with Epilepsy (Scout) and it did not turn out well.  The standard treatment at the time (18 years ago?) was phenobarbital, the same drug used to control the condition in humans.  Scout did not respond to small doses and the amount we had to give him eventually destroyed his liver.  But we had no choice; he went into a grand mall seizure one night and would not come out of it.  We had to take him to an emergency veterinary clinic at 2 AM and they had to inject him with phenobarbital and something else to get the seizure to stop.

We had just started him on an experimental treatment using potassium bromide (KBr) dissolved in flavored pancake syrup when his liver failed and he died.  I told Barb about this but I did not know if the KBr treatment had become standard practice or not.  The apparent effect of the KBr was to mediate the uptake of the phenobarbital, allowing much smaller doses to be much more effective.  I searched online later and found that KBr has, indeed, become part of the standard treatment arsenal for canine and feline seizures.

For dinner I made a big green salad.  While pulling ingredients out of the refrigerator I found a bunch of asparagus that was spoiled so I threw it out.  That was too bad because I really like asparagus and this bunch probably came from the farmers market where we have bought very good produce.  I also had to throw away some blueberries and carrots this week but managed to salvage some of each.  I did, however, finish up the mushrooms in my salad.

Atmospheric conditions make all the difference in sunrise and sunset photography. Panorama stitched with MS-ICE.

Atmospheric conditions make all the difference in sunrise and sunset photography. Panorama stitched with MS-ICE.

Linda called around 7 PM (my time) and we brought each other up to date on how our days went.  Around 8 PM I prepped the remaining strawberries for later and then heated an Amy’s vegan tamale with Mexican rice.

I finally put aside the featured bus article template I worked on much of the day and started selecting and processing the photos for the article on the Hall’s bus.  By that point, however, I was tired and frustrated and making mistakes so I went to bed.  The southerly winds that brought the rain had shifted to the northwest bringing cool, clear air with them.  It had cooled off enough in the bus that I turned on the electric heating pad for the first time in quite a while.

 

2015/02/07-11 (S-W) In and Around Q

Leave a reply

2015/02/07 (S) Bouse, AZ

We got up around 8 AM, got cleaned up, and had coffee and granola.  Linda then cut my hair, which seems to be a once every 4 to 6 weeks thing when we are traveling.  Butch and Fonda went to Yuma to meet up with Bell, Bell’s daughter, and Bell’s three grand-daughters.  Bell’s daughter was in Yuma with her Roller Derby team and the family came along.  We wanted to get out and do some more sight-seeing and decided to drive to Bouse, Arizona.

Cholla "teddy bear" cacti at Quinn's Pass on the road to Bouse, AZ.

Cholla “teddy bear” cacti at Quinn’s Pass on the road to Bouse, AZ.

Bouse is a small town located in the next valley to the east of Quartzsite, which sits in the La Paz valley.  It is on AZ-72 at the eastern end of Plomosa Road.  The western end of Plomosa Road is at AZ-95 seven miles north of the city limit of Quartzsite.  The first three miles of Plomosa Road heading east from AZ-95 runs through the BLM Plomosa Road STVA.  The road is paved its entire length and provided a fun and scenic drive out to Bouse and back.  We stopped at Quinn Pass to read the historical marker and ended up going on a short hike.  We have wanted to do this little trip ever since friends told us about it, but today provided an added incentive to finally go; the Parker 425.

The Parker 425 is an annual off-road race in the desert east of Parker, south of the Buckskin Mountains, and north of Bouse.  The course is a little over 140 miles in length and the race consists of three loops for a total of 425 miles.  It begins and ends at the Bluewater Resort and Casino in Parker.  Last year’s winner completed the race in just over seven hours.  That’s an average speed of 60 MPH, and there are plenty of curves and bumpy areas where it is not possible to go that fast, so the vehicles are really moving every place they can.

When we got to AZ-72 we crossed the highway, drove three short blocks, and made a left on Swansea.  I could see from the GPS that it was a paved road that continued in a northeasterly direction.  I had looked at a map yesterday and had a general sense that one of the spectator areas was out that way.  We did not have to drive very far before we saw Jeeps and ATVs parked on top of a big hill all facing the same direction.  We drove past the turnoff for that area and just around the hill was a large parking area full of cars and RVs.  The dirt road was closed, the Fire Department was set up there, and there was a checkpoint for the race.  I found a place to park and we got out to check out the action.

We stayed long enough to see a dozen different vehicles pass through the checkpoint and I shot photos from several different vantage points.  There are different classes of vehicles, but the ones we saw were of two types: highly modified small pickup trucks, and custom built off-road racers known as “grasshoppers” because of their long shape and the suspensions allow them to “bounce” over bumps in the road.

View looking NW from the Quinn's Pass area between Quartzsite and Bouse, AZ.

View looking NW from the Quinn’s Pass area between Quartzsite and Bouse, AZ.

The air temperature was pleasant but the sun was very hot so we drove the short distance back to Bouse, stopped at AZ-72, and quickly scoped out the town.  We spotted the Coachman Restaurant just northwest of the intersection and drove over there to have lunch.  We each had a garden salad and iced tea, and I had French fries.  We can pretty much count on lettuce and potatoes in any restaurant we visit.

Bouse was founded in 1908 as a mining camp but as a waypoint between Phoenix and Parker it now survives on tourism, agriculture, and retirees.  Measuring 10.1 square miles at 947 feet ASL with 996 residents (2010 census) the area enjoys sunny skies year-round.  We saw RVs of all types throughout town and in the dessert along Plomosa Road which is all BLM land.  There were also quite a few RVs in the Bouse Community Park.

We drove back to Quartzsite the way we came, a distance of 30 miles, because the only other ways back were via Parker (64 miles) and Phoenix (at least 250 miles).  Linda wanted to walk through the Tyson Wells market area one more time as this is the last weekend for the Craft Show.  We bought a cute hand puppet that we think grand-daughter Madeline will find very interesting.  We drove over to Barry’s Breads to get a loaf of his Barry’s Basic Bread but he was not open.  In fact, it looked like he was done for the season.  Activity really has slowed down here and he is presumably getting ready to move to his next venue.

We stopped at the Road Runner Market and bought a loaf of French bread and some red grapes.  We then drove to the Quartzsite Cemetery to take photographs of Hadji Ali’s (Hi Jolly’s) gravesite, which is marked by a small pyramid with a silhouette of a camel on top.  As long as we were there we wandered around the rest of the cemetery, which was an interesting and well-kept place.

Once we were back at the coach Linda sat outside and read while I transferred photo files from my camera to my computer and backed them up to our NAS.  I then continued selecting and processing images from yesterday’s outing to KOFA NWR Palm Canyon.  I was starting to work on the images from today when Linda cane in and started making dinner.

She decided to make “Mustard Greens and Beans” using Great Northern beans.  In addition to the usual onion and garlic, it had vinegar, a little sugar, and honey mustard.  It was very tasty and we agreed it was a keeper.  She served sautéed green beans on the side, cut up some of the French bread, and poured a couple of glasses of Franzia Refreshing White wine.  Sliced fresh strawberries and cookies for desert completed the meal.

Butch and Fonda got back from Yuma while Linda was cooking.  I gave Butch a call after dinner to discuss our TireTraker systems.  He needs to charge their monitor this evening and I asked him to check on the behavior of the LEDS on the 12/24VDC plug.

As we do most evenings, Linda read and played online word games while I worked on this post for a while and then resumed editing photos on my computer.  I checked e-mail again and had several regarding the upcoming Freethinkers gathering at the Liar Peg Leg Smith Monument boondocking area near Borrego Springs, California.  One of them posited the question of how often Friday the 13th occurs?  I did a quick online search and the answer appeared to be 1 to 3 times per year and every 12/7 or 1.714 times per year, on average.  That is 171.4 times per century or 1,714 times per millennium.  I posted that back to the e-mail reflector and went to bed.

Rocks and flora at Quinn's Pass, AZ.

Rocks and flora at Quinn’s Pass, AZ.

2015/02/08 (N) Another Meetup

I was up at 7:30 AM this morning and got the coffee made right away.  Linda did not sleep well last night but got up as soon as she smelled the coffee.  Breakfast was toast and preserves.  I was planning on putting in a long day at my computer and Linda was planning on doing laundry and some work for the bakery but our plans changed before we got started.  When I checked my e-mail I had one from Lou and Donna Rice of our FMCA Freethinkers Chapter indicating that they were at Mile Marker 2 on Plomosa Road.  We drove right past them twice yesterday on our visit to Bouse but had no idea they were there.

Plomosa Road is about seven miles north of Quartzsite on AZ-95.  We left at 10 AM and were parked next to their Jeep before 10:15.  We sat and talked for four hours before returning to our coach.  As soon as we got back I took our TireTraker monitor and charger over to Butch’s coach.  We tried our charger on his monitor and it worked fine.  We then tried his charger on our monitor and it did not work.  Between our four devices it was clearly our monitor that was defective.  I will have to call Darryl Lawrence tomorrow and see what we can figure out.

We each had a pear, some red grapes, and something to drink.  Linda gathered up laundry and I got to work editing consolidated blog posts.  In between loads she sat outside and read.

Fonda had two Poblano peppers she got at the Farmers Market on Wednesday and gave them to Linda.  Linda found a recipe for stuffed grilled poblanos.  The stuffing was white rice, scallions, black beans, tomatoes, vegan sour cream and cheddar cheese, and cumin.  It resembled Mexican rice but with a creamy/cheesy dimension.  She cooked the stuffed peppers on Butch and Fonda’s little grill and cooked the extra stuffing on our cooktop.  She served the dish with Clementine orange wedges and a glass of Franzia Refreshing White wine to make an outstanding meal.

After dinner we sat outside Butch and Fonda’s bus enjoying the cool desert night air and watching the lights of airplanes flying overhead.  It eventually cooled off enough that we returned to our coach where I continued to work on blog posts and Linda worked on the bakery accounting.  She eventually went off to bed and I uploaded survey items to the FMCA Education Committee folder in our Dropbox and sent an e-nail to the committee.  We have a committee work session tomorrow at 4 PM EST (2 PM MST).

Vehicles positioned east of Bouse, AZ to watch the Parker 435 off-road race.

Vehicles positioned east of Bouse, AZ to watch the Parker 435 off-road race.

2015/02/09 (M) A Bright Idea

Butch called around 8:20 AM to let me know that our light bulb order was at the Post Office awaiting pickup.  He and Fonda were headed to the Quartzsite Gem and Mineral Club for a day-long class on faceting, so he gave me the parcel slip so I could go pick up the package.

While we were eating breakfast it suddenly occurred to me that we should visit Frank Lloyd Wright’s Taliesin West while we are camped near Tucson next month.  Linda went to the website and discovered that it is in Scottsdale which is a northern Suburb of Phoenix and is closer to Quartzsite than it us to Tucson.  We selected a couple of possible dates and she went online to get tickets.  The “Behind the Scenes” tours are only done on Monday, Thursday, and Saturday.  She tried to get tickets for Monday February 16 but they only had one left.  She called but they would not sell us two tickets.  We waited way too long to think of this and painted ourselves into a corner so it may not happen on this trip to the southwest.

I drove to the Quartzsite Post Office after breakfast and retrieved the package, only my second trip to the Post Office to transact business since we arrived in Q.  The first trip was to sign up for the P. O. Box.  Linda usually takes care of the mail while she is out walking and Butch usually checks the P. O. Box, which is at a different location that is not quite as convenient a walk from our camp as the main building.  We have not used the P. O. Box very much, but it has been invaluable when we have.

I worked most of the day on some of my blog posts for December 2014.  I took a break around 12:30 for a bite of lunch and then called Daryl Lawrence and left a message regarding our TireTraker TT-400C monitor which appears to not be recharging.

The Parker 425 checkpoint east of Bouse, AZ. This race is a BIG deal with fire, EMS, and helicopter coverage.

The Parker 425 checkpoint east of Bouse, AZ. This race is a BIG deal with fire, EMS, and helicopter coverage.

Gaye Young called around 1:30 PM to make sure I was going to participate in the FMCA Education Committee work session at 2 PM.  (Gaye is the chairperson of the committee.)  There were only two items on the agenda and I had to give the status report on both of them.  Our work sessions and meetings are conducted by telephone conference.  They usually last an hour and today was not an exception.  If committee members provide me with additional input this week regarding an education survey we are developing I will have some work to do the last two weeks of the month in addition to working on articles for Bus Conversion Magazine, completing some minor repairs on the bus, finishing the cleaning/waxing of the exterior of the bus, and cleaning/waxing the car.

I managed to upload consolidated blog posts, including some photographs, for December 5 – 8, 9 – 12, and 13 – 16, 2014.  I did not take very many photos while we were traveling but once we got settled in Q I got the camera out and started using it.

I got a call back from Jeff at TireTraker support.  I explained what the monitor was (not) doing and he agreed to mail me a new one along with a new charger.  We will return the defective one to Daryl at Escapade next month.

Linda cooked up a couple of Tofurkey brand vegan Italian sausages with sweet onions and sweet red bell peppers and served some broccoli as a side dish.  After dinner I removed my bulbs from the Bulbtown shipment and checked the quantities and prices against my spreadsheet.  I then took the remaining bulbs over to Butch.  He had ordered 10 #4003 bulbs to use in his bay fixtures and realized when he saw them that he should have ordered #4004s.  Both are 24VDC bulbs but the #4003s have a single contact base whereas #4004s have a double contact base.  I think my bay light fixtures may take #4003s.  I will check tomorrow and if so I will buy them instead of Butch.

We sat outside with the lights off enjoying a glass of wine while watching the long lingering sunset backlight the mountains to our west.  As the sunset faded we looked at the stars and watched aircraft lights moving east and west high over the desert.  It still cools off here after the sun sets but not as quickly, nor as dramatically, as it did just  a week ago.

I combined the blog posts for December 17 – 20, 2014.  I had selected and processed photos for this post earlier so it was ready to upload at 11 PM but I did not want to go through the process at that late hour.  I dealt with a couple of e-mails and then went to bed.  A short time later Jasper threw up a large quantity of food so I had to get up and deal with that.  It looked like it had some hair mixed in with it, but I don’t know if that was the root cause.

2015/02/10 (T) Deionized

We were planning on heading to the Peg Leg Monument boondocking area on Thursday, spending the night in Indio, California and visiting Joshua Tree National Park (JTNP) on Friday before driving home Friday evening.  Ken Harrison from the FMCA Freethinkers indicated that he and Linda would not make it to Peg Leg until Friday.  That prompted us to consider flipping our plans, doing JTNP on Thursday and Peg leg on Friday.  Either way we will stay in Indio as we already have reservations at a motel.

The Polaris RZR ("razer") was one of the most popular 4-wheel ATVs in and around Q.

The Polaris RZR (“razer”) was one of the most popular 4-wheel ATVs in and around Q.

We had another stay-at-home day relaxing while getting things done.  Linda was going to drive to Blythe for groceries, but decided to go on Sunday as we will be away from camp all of Thursday and Friday and much of Saturday.  She is going to see if the Farmers Market is still operating tomorrow morning.  If not she will stop by the Road Runner Market.

As has been our pattern recently Linda went for a long walk (5 miles) while I continued to work on blog posts.  We had a light lunch when she returned.  I then called Teeko’s Coffee and Tea in Howell, Michigan and ordered six pounds of roasted coffee beans to be shipped to us here in Q.  We are approaching the midpoint of our snowbird season and are almost out of the five pounds of coffee we started with.  Jeff is going to roast two pounds each of Ethiopian Yirgacheffe half-caff, Sweet Seattle Dreams half-calf, and Cafe Europe Blend half-caff.  He will let it out-gas for a couple of days and then vacuum seal it in one-pound portions and mail it to us in a USPS flat rate box that will go to our P. O. Box in Q.  That should be enough to get us home even if we do not get there until late April.

Butch is always looking out for us and trying to help us spend our retirement dollars so he sent me a link to a portable two-tank water de-ionizing system that is available from RVupgrades.com.  The system is intended for washing/finishing cars and RVs as de-ionized water has had all of the dissolved minerals removed and does not leave spots on surfaces when it dries.  It is not, however, considered suitable for drinking.  The two tanks are plumbed in series and use special resin beds that have to be replaced when exhausted rather than recharged.  The first tank removes cations and the second removes anions, leaving the water completely deionized.  The cations are the positively charged ones typically “removed” by water “softeners”, such as calcium, iron, and magnesium, through ion exchange with sodium.  The anions are the negatively charged ones that water softeners typically do not remove, including fluoride and sodium.  The dual tank system is about 33% more expensive than a single tank portable water softener, but given the time, expense, and frustration I am experiencing trying to clean and wax our motorcoach I am seriously considering ordering one tomorrow.

I uploaded two consolidated blog posts yesterday and another one this afternoon.  I consolidated the posts for December 21 – 26, 2014, selected and processed the photos, and then took a break to sit outside and just enjoy the weather.  No book, no iPad, no computer; just ahhhh.  It was 78 degrees F with 19% relative humidity, a steady breeze from the northwest, and a hot sun shining through absolutely clear blue skies.  Linda and I agreed that it was the most perfect weather day we have had so far this winter.

Linda had some seitan ‘mock’ beef in the freezer that she heated in a saucepan and served with basmati rice accented with soy sauce.  Very simple but very tasty.  After dinner I uploaded the December 21 – 26 consolidated blog post along with 12 photos, entered all of the tags, and published it.

I got an e-mail yesterday from Cherie Ve Ard of Technomadia asking if we would be interested in previewing/testing another new website.  I said ‘yes’ and she responded with the URL for the development site.  When I was done with our website I went to the new one and created an account.  I got an activation e-mail, clicked the link, and was able to login.  I spent an hour looking around the site and captured my impressions and suggestions in an e-mail back to the development team.  I took a few minutes to investigate portable water deionizers but by then it was too late to get involved in any serious research so I went to bed.

2015/02/11 (W) Update This!

Hi Jolly's (Hadji Ali's) gravesite in the Quartzsite Cemetary; allegedly the most visited place in Q.

Hi Jolly’s (Hadji Ali’s) gravesite in the Quartzsite Cemetary; allegedly the most visited place in Q.

Linda’s cell phone rang just before 8 AM.  It was Barb.  She and Jim were up, dressed, and had the golf cart out and ready to go to the Farmers Market.  When we mentioned it yesterday Barb said she wanted to go and Linda indicated that it was open from 8 AM to noon.  Somehow that got translated into leaving at 8 AM to go to the market.  Linda, being a good sport, got up, got dressed and walked over about 8:15 and said she was ready to go.  No breakfast, no coffee, just the “git er done” spirit of the old west.  I stayed behind and got the coffee ready to brew when she returned.  I then got to work on computer stuff in the true “git er done” spirit of the new/virtual west.

They returned from the Farmers Market around 9:30 AM.  Linda bought another Romanesco brocciflower, some Brussels sprouts, grapefruit, and oranges.  To our delight Barry’s Breads was also there and had a few loaves of Barry’s Basic Bread.  He told Linda he will be around, at least at the Wednesday Farmers Market, through the end of this month.

As much as I would like to have de-ionized water available for rinsing the coach as I wash it, I decided not to speed hundreds of dollars without first doing deeper research into the available technologies and their life cycle costs.  I had enough other stuff to do today that I did not want to make time to dig into this new topic.

Linda saw a photographers vest at the Salvation Army resale store the other day but did not buy it as it was $15, pricey for the SA, and she wasn’t sure it would fit me.  We drove over to the store to see if it was still there.  It was, and it was too small for me.  It also had a defective zipper.  For a moment I thought we were going to have to buy it so I could take it home and cut it off.  I managed instead to pull it off over my head like a t-shirt and Linda was then able to get the zipper undone and put it back on the rack.  This was my first time in the store so while we were there I found two pairs of shorts for $2 each, a third pair for $0.50, and a lightweight, lined, waist-length London Fog jacket for $0.25.  Linda found a white hand-held mixer with two beaters for $4.  Deal.

When we got back Linda called the Prince of Tucson RV Park and made a reservation for the evening of Thursday, March 5th.  Lou and Val Petkus will already be there and this will allow us to caravan into the SKP Escapade at the Pima County Fairgrounds first thing Friday morning.   By coming in together we will be able to park together which will make our staff photography work more convenient.

My computer indicated that it had a large number of updates to install; 34, to be exact.  It was a 334 MB download so I turned on our Verizon Mi-Fi and switched my computer over to it.  The Mi-Fi is much faster than the Wi-Fi and I find that with large downloads the faster I get them done the more likely they are to complete successfully.  When those were done downloading and installing I had to restart my computer to finish the installation.  I also had an updated driver available for the NVIDIA GeForce graphics processor, so I downloaded and installed that.

 

I figured that if I had updates for my computer Linda would have them for hers.  I switched her computer over to our Mi-Fi and checked for updates.  She had 20 recommended and 4 optional.  I selected all 24 and the download was 980 MB.  That’s a lot of updates so I started it and let it run.  As always, finishing the installation required the computer to be rebooted.  When it restarted her computer the screen was once again functioning normally.  Go figure.  She also had an Adobe Creative Cloud update so I started that.  It failed at the 29% point so closed it and restarted it.  The second time it ran to completion.

Linda needed to work at her computer so we both sat at the dinette table and did our respective computer things.  She brought our financial records up-to-date in Quicken and I compiled and then uploaded a consolidated blog post for the last six days of December 2014.  I had e-mails going back and forth with some of our fellow FMCA Freethinkers regarding the Peg Leg gathering and ended up joining the Freedom From Religion Foundation.  I’ve meant to do that for a while and the electrons finally aligned just right this afternoon.

Hi Jolly's pyramid gravesite marker is a State Historical Site.

Hi Jolly’s pyramid gravesite marker is a State Historical Site.

Somewhere during the course of the afternoon we had sandwiches for lunch and snacked on dried fruits and nuts.  Kathi Slater called to check on Linda’s travel arrangements, after which I made popcorn.  Linda borrowed a small cooler from Butch and Fonda for our 2-day trip to California and back.  Fonda came over to go through the chores involved in caring for the cats while we are away and Linda gave her a set of keys to the bus.

I had seen a quick notification from the RV Internet Resource Center (Mobile Internet Aficionados membership website) that WiFiRanger had finally released their new firmware upgrade for the WiFiRanger Mobile.  Using my iPad as the control panel I switched our WFR-MT from the Wi-Fi/DSL connection to our Verizon Mi-Fi.  Again, I wanted to make sure this upgrade got downloaded as quickly as possible through the most reliable connection we have.  The download was reasonably quick but the installation took quite a while.  My iPad eventually lost contact with the WFR-MT and I just left it to finish and went over to visit with Butch and Fonda and Linda.  We came back to our coach when their dinner was ready and the WFR-MT firmware upgrade had finished installing successfully.  I switched the connection back to the Wi-Fi/DSL that we get to use as part of our “rent” while we are here.  I switched our laptops back to our internal Wi-Fi network and then shut the Verizon Mi-Fi off to let it recharge.

Neither of us was very hungry after snacking late this afternoon so Linda sliced the remaining tofu and pan-seared it.  She caramelized onions, added BBQ sauce, and served it open faced over the tofu.  After dinner Linda made a list of things we needed to take tomorrow while I made a final check of e-mail.  I e-mailed Lou Petkus to let him know that we were booked into the Prince of Tucson RV Park for March 5th.  I sent a message to Curtis Coleman via RVillage to accept his invitation to boondock in his driveway and see if March 3 and 4 would work for him.  He phoned back to confirm that it would be OK and then sent his address via TXT message.  I also had an e-mail from Kate de Fuccio and replied to that.  I checked for updates and my computer had several more to install so I started that process.  I checked Linda’s computer but she did not have any updates pending.  Although we got a lot of other things done today it felt like I had mostly dealt with computer updates.  Update days are often like that and you cannot schedule them because you never know when Microsoft is going to drop a big ‘update bomb’ in your lap.

Linda went to bed around her usual time.  I turned in shortly thereafter and much earlier than I have been.  We plan to get up at 6 AM tomorrow, have a light breakfast, finish packing for our trip, and be on the road at 7 AM.  We will stop at Albertson’s in Blythe, California for some water, ice, and other snack items to get us through the day to dinner at Native Foods in Palm Springs and give us something to eat on Friday while we are at the Peg Leg gathering.  Albertson’s opens at 6 AM PST, which corresponds to our 7 AM MST departure time.  We should arrive at the south entrance to Joshua Tree National Park around 7:30 AM PST which will give us a good, long day to explore the park.

 

2015/01/01-07 (R-W) Q 2015 W1

Leave a reply

2015/01/01 (R) Hola 2015

The salt restraining tube for the water filter housing. The slotted end (R) goes down and the o-rings sit in the other end.

The salt restraining tube for the water filter housing. The slotted end (R) goes down and the o-rings sit in the other end.

Having stayed up later than usual last night to see the old year out and welcome the new year in we were in no hurry to get up this morning, especially given that the temperature outside was in the upper 20s.  But Linda said she would make her yummy vegan cinnamon rolls for breakfast so I felt obligated to get up and eat them.  Besides, it’s my job to make the coffee.  The rolls took quite a while to make and we ended up having them for brunch, but they were worth the wait.

I spent much of the morning looking for new games in the iStore.  I downloaded a dozen free ones and then started trying them in turn.  Most of them immediately tried to sell me a full version or ran a full-screen advertisement each time I tried to start a new round of play.  If they did that I immediately deleted the app.  I cannot imagine what makes a game developer think someone with tolerate that more than once.  At some point I realized that my AppleID was still associated with an old e-mail address so I initiated the process of changing it.  The process was not as seamless as I thought it could/would/should be, but I eventually got it sorted out.  Or as they say or Doc Martin, “sorted.”  As it turned out my credit card information was also out of date so I updated that as well.  Obviously I do not make iStore purchases very often.

I needed to regenerate our portable water softener even though it was 48 degrees F outside in the shade.  It was, however, comfortable enough in the sun to be able to work.  I started at noon cutting the plastic drain pipe that I bought at Herb’s Hardware the other day to a length of 10″ which is the length of a standard water filter.  I cut eight 3/8″ slots in the bottom end of the tube and got an O-ring from Butch to fit in the swaged upper end.  The purpose of the tube is to hold salt so that incoming water is required to pass through it to get to the softener but the salt crystals cannot actually wash into the softener.

Linda helped me transfer the contents of a 40 pound bag of solar salt to several two-gallon zip lock bags.  I then put a small quantity of salt in a one-quart zip lock bag and gently smashed it with a two-pound sledgehammer, although as I write that it seems to be something of an oxymoron.  I inserted the tube into the removable filter housing, slotted side down, and poured the salt around the outside of the tube.  I smashed a second bag of salt and added it to the housing.  I put the housing back on the filter head and slowly ran water through the softener for almost two hours.  I got a water hardness test strip from Butch and tested the output of the softener.  It was still showing 7 grains of hardness, exactly the same as two days ago.  It appeared that the regeneration process had not had any effect.  Bummer.

I discussed the situation with Butch and he suggested I back flush the softener.  To do that I needed a hose with female hose fittings on each end.  This is the kind of hose used to hook up a washing machine but neither one of us had one with us.  Butch, however, had a female-female adapter which allowed me to connect a male hose end to a male fitting on the outlet of the water softener.  (Backflushing literally means running water through the softener in the reverse direction to flush out any debris that may after gotten in through the normal inlet.)

The salt retaining tube in the filter housing with salt around the bottom outside and the o-ring visible at the top.

The salt retaining tube in the filter housing with salt around the bottom outside and the o-ring visible at the top.

After backflushing the softener I tried regenerating it again.  This time I used a 26 ounces of fine grain non-iodized table salt.  With my homemade diverter tube still in place I added the salt around the outside and screwed the housing back on.  I let the salt sit in the housing for 20 minutes to start to make a brine and then ran water through the softener until I got a very salty taste at the output.  I then shut the outlet valve and let it sit for 20 minutes.  When the time elapsed I ran water through the softener for another 15 seconds, checked it for saltiness, and shut the outlet valve.  At the end of another 20 minutes I ran water through it at a very slow rate for 20 minutes and then checked it again for salty taste.  It was still slightly salty and as it was getting close to sunset I decided to let it sit overnight.  I will finish flushing it tomorrow and check the hardness again.

While I was fussing with our water softener Butch recharged theirs in about 30 minutes.  When he tested the water at the end it indicated zero (0) grains of hardness; completely softened.  Their softener is different from ours and the regeneration procedure is very straightforward and apparently works.  For now I need to figure out a guaranteed procedure for regenerating ours, but long-term I need to figure out some other arrangement of just get a different softener.

The arrangement I am considering would be in conjunction with redoing the water bay. With a different arrangement of tanks I could create space in the bay for the softener, multiple filter housings, and associated plumbing.  I could set up an arrangement that would divert the incoming water (after the first/sediment filter) through a clear filter housing into which I could put the salt.  That clear housing/head would be permanently modified to force water through the salt and allow me to see when the salt was gone.  It would also eliminate the need to remove and reinstall the filter the way I have to now.  Alternatively I could put a tank between the filter housing and the softener (instead of the clear housing) and use it as a brine tank.  If the tank was big enough to hold a 40 pound bag of solar salt it would work just like a home softening system.  Water would sit in the tank with the salt for days so that the brine was ready to use when it was time to regenerate the softener.  I could even rig up a separate pump just for pumping the brine into the softener.  I’m going to give this a lot of thought before I start changing things around, but last winter in Florida and this winter in Quartzsite have made it very clear that hard water is a problem and we need a very effective and efficient way to deal with it.

While I worked with the water softener Linda began preparing a Tex-Mex bean soup for dinner and then went for a long walk.  She finished making the soup when she got back while I took a short nap.  It cooled off quickly as the sun set and nothing is quite as satisfying on a cool evening as hearty, hot soup.  It also had a bit of red pepper heat which was a nice bonus.  It was really good soup.

I had a few e-mails from Gary at BCM and a nice follow-up e-mail from Kathy at the Michigan Assessment Consortium.  She attached a copy of their holiday letter so I attached a copy of ours in reply.  I spent a little time browsing websites for OTA TV antennas and turbo boost gauges and finally went to bed without resolving what to do about either thing.  I have a lot of nights that end like that.

2015/01/02 (F) Crazy Days In Q

Contact is established with our cat, Jasper.

Contact is established with our cat, Jasper.

The “show” at Desert Gardens officially opened yesterday and runs through the end of February, so Quartzsite is quickly be transformed into a crazy place.  We were chatting with Butch, Fonda, Jim, and Barb after breakfast and Barb reminded us that starting now driving and parking “downtown”, and especially along Kuehn Street south of I-10, during the day will be difficult to impossible.  She offered to drive us down in the golf cart and come pick us up if we did not want to walk.  She also told us that many vendors will hold purchases for pickup at the end of the day.  We exchanged cell phone numbers, which we had not yet done since they arrived.  She suggested that if we wanted to eat out we should go early or right before closing as we might not be able to get seated/served otherwise.  There’s no doubt that we have lucked out on our arrangements this winter, and the situation just keeps getting better.

Linda was browsing on her iPad and discovered an all vegan grocery store in Rancho Cucamonga, California; the largest all-vegan grocery store in the world.  I looked up Rancho Cucamonga on Google Maps and it is located about half way between Los Angeles and San Bernardino.  Based on the speeds I like to drive (often just below the speed limit or 68 MPH, whichever is less) it looks like a four hour drive one-way from Q.  That’s obviously too far for a regular grocery run, but we might make a day trip in that direction sometime this winter and find the store while we are over there.

One of the things I did after climbing in bed last night was spend a little time looking at the Sure Marine Service website.  SMS is a major supplier of repair parts for Webasto diesel-fired hydronic systems headquartered in Seattle, Washington.  After studying their parts diagrams I became unclear (and concerned) as to whether the burner we removed from Butch’s old unit was a DBW2010 or a DBW2020.  They are very similar but not identical.  I am almost certain that our original burner is a DBW2010, but our AHU-xxx Aqua-Hot is so old that the model number is no longer referenced on the website and model specific documentation, like a service manual, is not available for download.

The reason I was looking at the parts diagrams was to identify the bearing kit for the blower as I wanted to order two of them today.  What I could tell from the website was that the 2020 is a higher BTU output burner and so one of the differences is that the 2010 uses a 0.35 GPH nozzle while the 2020 uses a 0.60 GPH nozzle.  That alone might account for why we seem to have poor combustion, although even money is still on bad bearings.  The unresolved issues and the inability to investigate at midnight did not make for a good night’s sleep.

I have the Aqua-Hot service/repair manual for the unit I bought from Butch, both on paper and on my iPad, so I spent some time this morning looking at the iPad version.  I could not tell if they used the same bearing parts so I did not order anything today and won’t until I can determine model numbers.  I asked Butch if he knew which burner was in the Aqua-Hot I bought from him, but he did not.  The service manual shows a Webasto label that identifies the burner model, but does not show where the label is located.  More investigation was needed.

After I got dressed I e-mailed Bill Gerrie (RetiredBusNut) in Ontario, Canada with questions about gauges and sending units for our bus engine and transmission.  I then started dealing with the water softener.  Linda returned from her walk and started preparing lunch, so I emptied the filter housing of the little bit of salt that was still in the bottom, rinsed it clean, re-installed the filter, and let it run for 20 minutes to fully flush out any residual salt water.

Linda made a warm garbanzo bean and kale salad for lunch with lemon juice and garlic.  It was the first time she had tried this recipe and we both agreed it was a keeper. After lunch I tested the hardness of the water coming out of the softener and it registered on the test strip between zero (completely soft) and 1.5 (definitely soft) so I dumped the remaining (hard) water in the fresh water tank and refilled it with 120 gallons of nice, soft water.  After the tank was full I retested the water coming out of the softener and got the same reading as before.  Finally, some good news on the water softener front.

With water softening taken care of (for now) I did an online search for a panoramic camera tripod head.  I really like shooting panoramas and the Microsoft Image Composite Editor (MS-ICE) does a remarkable job stitching images together.  Most of my panoramas have been handheld, which makes the performance of MS-ICE all the more impressive.  I have shot a few panoramas using a tripod but without a nodal point (spherical) pan head, so that is what I was searching for online.  B&H Photo had a Manfrotto on sale for $280, marked down from $600, but their order desk was closing for the day and I did not want to be rushed making this decision so I did not order it.  They will reopen tomorrow, so I will think about it overnight and do some more research.

I got our old Webasto burner out of the front bay and found the label.  It is, indeed, a DBW2010, specifically a DBW2010.75 with a 0.35 GPH nozzle rated at 45,000 BTU.  Linda recorded the details, including the serial number, and then helped me rewrap it in bubble wrap so I could put back in its storage pail.

Linda then went to Parker, Arizona with Butch and Fonda to check out the Safeway grocery store and look for some things at Walmart.  The Parker Safeway was supposed to carry Daiya vegan cheese products but they were nowhere to be found.  It appears that our closest source will be Whole Foods.  There are five of them in the greater Phoenix area but that is a two hour drive one way.

While the three amigos were gone I removed the cover from the Aqua-Hot in our coach and found its label.  Much to my relief it is also a Webasto DBW2010.75, 45,000 BTU.  It should also have a 0.35 GPH nozzle, and probably does, but I did not pull the burner out to check.  I noticed some soot on the final fuel filter inside the housing and in other places so that gave me something new to be concerned about.  I was pondering the situation when Jim and Barb and Roho came over to visit and we had a good long chat.  When they went back to their motorhome I put the cover back on the Aqua-Hot and put all of my tools away.

My plan for tomorrow is to turn the Aqua-Hot off, let it cool down, and pull the burner to check the nozzle.  It’s possible, though not likely, that I do not have the burner seated quite right and there’s a chance, though very small, that reinstalling it will fix, or least improve the performance.  My money (literally) is still on the blower bearings.  Hopefully it does not also need a new motor as everything on a Webasto is more expensive than seems reasonable. It’s another fine example of precision German engineering and manufacturing.

Even though I have quite a few e-mail addresses that I use to segregate electronic correspondence into manageable categories my inboxes still end up flooded with e-mails.  Very few of them are spam—we have good spam filtering on all of the accounts—but some of the highest volume inbound traffic is notifications of things like failed login attempts on WordPress websites.  Those e-mails do not get replies and often do not require any specific action on my part, but they sometimes obscure the presence of other e-mails that do require my attention.

Microsoft Outlook is able to deal with incoming (and outgoing) e-mails based on user-defined “rules” but I had never played with that feature until today.  I used the online help system to read about the whys and wherefores of e-mail rules and then tried creating some.  Once I understood what I was trying to accomplish it was mostly point and click to get it done, with a little typing thrown in.  What I ended up doing was creating sender/subject subfolders under the inbox of certain accounts and then creating a rule for each subfolder that directs incoming e-mails matching the criteria to the correct folder.  By keeping the sub folders under the inbox folder it will be clear to me that these are e-mails that I have received but not yet dealt with.

For dinner Linda made a cooked shredded Brussels’ Sprouts dish with tomatoes, dried cranberries, and pistachios and served it alongside the leftover Mexican rice with a glass of sangria.  Ole!  We agreed that both of these dishes were keepers and went well with the fruity wine.  The rest of the evening was quiet.  Linda read and played her online games while I finished up working on this post.  I finally went to bed and started reading the service and repair manuals for the Aqua-Hot system and the Webasto burner.  According to the long-term weather forecast tonight should be our last night with an overnight low temperature below freezing.

 

A few of the vendors at Desert Gardens, Quartzsite, AZ.

A few of the vendors at Desert Gardens, Quartzsite, AZ.

2015/01/03 (S) Hammer Stahl

I got up at 6:30 AM today.  I had been awake for a while before that and had some things I needed/wanted to do on my computer.  These were quiet tasks that I could do in the front of the coach, with the heat turned up, without disturbing Linda.

I always check my e-mail first.  There was a group message from Hillary at RVillage to all of the Ambassadors regarding a new feature they will be rolling out soon and seeking our assistance.  I mentioned this to Linda when she got up and we watched the two YouTube videos.  We did not have time today but will work on it tomorrow in advance of a 5 PM (4 PM PST) web meeting.

My first project today was updating the spreadsheet I maintain for our FMCA Freethinkers Chapter, which I started working on last night.  The chapter treasurer maintains our checking account but as the secretary I maintain the records including the roster and who has paid their dues for what years.  Because I have all of those details I also generate the quarterly and annual financial statements.  I entered the information for dues payments that had been received between November 1 and December 31.  I then added the five worksheets for 2015 (four quarters and year), which tie together and link back to the 2014 statement, and updated the cumulative financial statement.

Linda got up so I put my work aside to make coffee while she made breakfast.  We had a few bananas that were ripe so she made green smoothies for breakfast.  We happen to like kale but if we didn’t, green smoothies would be an excellent way to get our daily dose along with several other healthy ingredients.

We talked about visiting the market area today and decided to go later when it was a bit warmer.  The temperature a 9AM was still only 40 degrees F so Linda bundled up and went for her morning walk while I continued to work on my spreadsheet.

Once I finished the spreadsheet I worked outside for a bit.  I removed the cover from the burner end of the Aqua-Hot while it was running to check for an exhaust leak (sight, smell, touch) but I could not detect one.  When the cycle finished I turned the burner off.  My plan was to let the unit cool off and then remove the burner to check the nozzle size and do a general inspection of the combustion chamber and visible parts, but that did not happen today.

What I did instead was return to my computer and start putting Webasto repair parts in my shopping cart on the Sure Marine Service website.  The bearings on the installed burner are definitely whining and need to be replaced.  They are supposed to be replaced regularly anyway, so I put two sets in the cart.  It is very likely that they are causing the motor to run slow which means insufficient combustion air, and possibly lower fuel pressure, leading to the dark smoky exhaust.  I also put a fuel solenoid valve in the cart.  There is a good chance that the valve and/or the solenoid are not working on the other burner.  There’s also a chance that the ignition coil has failed, but the solenoid valve costs 1/2 as much as the coil, so I’m hoping it’s the valve.  I got the order submitted with UPS ground shipping and used PayPal to make the payment.

Once I completed the SMS order I loaded the B&H Photo app onto my iPad and spent quite a bit of time going between their website and the Sony online store trying to figure out if I should order a panoramic tripod head and/or new camera, possibly with a lens and flash unit.  Sony has the Alpha 99 FF body marked down from $2,800 to $1,900 with the vertical grip and an extra battery thrown into the deal, an additional $500+ value.  They will also bundle in the SAM 28-75mm f/2.8 lens for $400.  The lens by itself is normally $900, so that’s another $500 savings.

So for $2,500 I could get $4,200 worth of Sony’s top-of-the-line “flagship” DSLR (DSLT, actually) equipment, except for one thing; it was all on back order with an ESTIMATED ship date of February 4, 2015.  That’s my birthday, so if it actually shipped on that date it would be quite the birthday present, but if it was delayed very much there would be the very real possibility of it arriving at our location in Q after we had left.  Not good.

So what about B&H Photo?  It turns out that they (claim to) have all of these pieces in stock and they are selling the body with the added pieces for the same price as Sony, but they are not offering the lens at the bundled price.  That was the deal breaker that saved me spending a lot of money today.  Besides, I have been waiting a long time for Sony to officially announce and the ship the new (rumored) flagship alpha a99-II with its 36MP FF 35mm sensor and long list of awesome features.  To decide now to by prior generation technology it would have to be a very attractive deal, much better than what I was seeing online.

I ended up ordering a Manfrotto Nodal Point Pro panoramic tripod mount from B&H.  It should be here by the end of the week.  When it arrives I think we will hike up to the top of “Q Mountain” and try to capture the true essence of Quartzsite in the winter, which is RVs from horizon to horizon.

We headed down to the market area on Kuehn Street with Butch and Fonda and walked around for a couple of hours in the Tyson Wells Show grounds north of Kuehn Street and west of Central Avenue (US-95).  This particular market area had really filled up with vendors in the last few days.  Linda bought a nice white apron and really nice Hammer Stahl 5.5″ Santoku knife.  She checked online when we got back and she paid about 55% of the MSRP on the HS website.  She bought it from Cutlery by LeClaire, which also has a website, and has it on sale for $20 more than the price on the HS website, marked down $20 from their “regular” price.  The point is, she got it for what appears to be a good price of $59 and it came in a nice box with a ceramic sharpener thrown into the deal.

We drove farther west on Kuehn Street and pulled into the Desert Gardens show grounds.  It was getting near sunset, so we did not stay long, but Linda and I walked enough of it to get a feeling for the place.  It was a “rougher” setup than Tyson Wells and many of the booths were selling large, rough rocks and gemstones.  The vendors also had a lot more equipment set up and were using it to process materials.  We’ll be back, probably more than once, and earlier in the day so we can spend more time.

When we got back to our motorcoaches Fonda came over and worked with Linda for a little while on their business records.  We then had a nice salad and some of the spicy bean and pasta soup (that Linda made the other day) with crackers and sangria.  I spent more time after dinner researching stuff on my iPad and working on this post.

We appear to be in one of the few places in the country that is not getting clobbered by bad weather. The temperature is not even supposed to drop below freezing overnight. It will still be cool tomorrow, however, and we did make specific plans before going to bed.

 

A view of "Q" Mountain from the Desert Gardens Show area.

A view of “Q” Mountain from the Desert Gardens Show area.

2015/01/04 (N) Our Village

We had vegan pancakes for breakfast which prompted me to suggest that Linda invent some recipes, even if they are interesting and successful variations on existing ones, and feed them to our grand-daughter.  Linda could put them on our website using the WP Ultimate Recipe plug-in and, if they met with her approval, name they after “Bitty” (youngest grand-daughter’s latest nickname, although I think I will always prefer “Schmoo”).  Perhaps Pancakes Madeline; Sautéed greens a la Madeline; Pasta Madeline; or Madeline’s vegan mac and cheese.  Being retired gives me a lot of time to think.

Joe’s brother, Jim L., finally returned from Nevada today and was able to get the park model trailer unlocked.  Barb has been wanting to get in and clean it since she and Jim (different Jim) arrived.  Barb is a keep busy kind of gal.  She is responsible for maintaining the apartment and laundry room while she is here and told Connie she would also do some deep cleaning on their house trailer, so it’s been bugging her that she could not get in to do it.  As for my part, all I did was lock the door on the trailer the way Connie asked me to.  Barb and Jim (husband) had lots of keys but could not get any of them to work.

 

Today was shower day.  This is always more of a production than we would like because we keep the cats’ litter tray in the shower.  Most of the time that works really well—it is out of the way and contains any mess they might make—but it is inconvenient when we want to use the shower for its intended purpose.  Besides pulling the tray out into the hall by the bathroom door we have to clean up any stray litter in the shower to make sure it does not end up in the gray water waste tank.  Litter tray or not we still have to spray the shower walls when we are done, squeegee off the glass door, let everything dry, and then reassemble it as a giant cat litter box.  But it works and it’s one of the compromises we willingly make to live with our cats in so few square feet.

 

Once I was dressed I went outside to chat with Jim L. (Joe’s brother) and we discussed the possibility of upgrading the electrical service at our site to “50 Amp” (240VAC, 50A, 4-wire, the equivalent of a 120VAC, 100A residential service).  It’s not an issue for us right now as the cool weather has us burning diesel fuel to make space heat, but once the weather turns warm we may need our air-conditioners.  We have three but can only run one on a “30A” service and still have enough power to run other things.  A 30A service is just what it says; 30A of current at 120VAC.  A “50A” RV service is slightly more than three times that amount of power.

 

The electrical hookups here are very interesting.  Perhaps all RV park power pedestals work the same way, but I have never looked inside one so I don’t know.  The meter is at the top and the area below it has a top-hinged cover.  Under the cover are three panels about 3″ wide and 15″ tall.  The panels have an outlet towards the bottom and a circuit breaker near the midpoint.  Behind the panels are busses for the hot, neutral and ground with male blade connectors.  The panels have female blade connectors that engage their male counterparts when the panel is slipped and then hinged into place.  It is secured with a single screw.  If Jim L. can find a 50A panel all we will have to do is unscrew and remove the 30A panel and plug in the new one, once we verify that 240 VAC (L1& L2) are present in the box and wired to the distribution busses.

 

Instead of her usual morning walk Linda setup her laptop on the dinette table and worked on accounting and tax issues for Butch and Fonda.  I set my laptop there as well to work on the roster for our FMCA Freethinkers Chapter and Jasper got in between us, so we had a nice, cozy computing session.  When I placed my order with B&H Photo yesterday I checked a box to receive shipping status information via TXT message.  I got one this morning letting me know that my package had shipped from NYC.  Cool.

 

With accounting chores done for now Linda prepared vegan hot dogs with mustard, onion, and relish for lunch.  She then went for a long walk while I stayed at the coach and worked with a new feature on the RVillage website.  I was posting a lot of suggestions to the topic thread on the Ambassador forum and got a phone call from Curtis, the founder/CEO of RVillage.   We had a long chat and I was still on the phone with him when Linda got back.  I worked with the website some more and at 5:00 PM we connected to an Ambassador meeting using GoToMeeting on my computer.  This is a very exciting new feature and I think RVillagers and RV-related businesses are really going to like it once they know about it and see how it works.

 

Linda made mock (vegan) stroganoff for dinner.  She normally uses Basmati but the only rice she had enough of was Texmati so she used that.  Although I did not care for the texture of the Texmati in this dish (a bit crunchy), the taste was still very good.  This dish requires real cooking, which means it makes a real mess.  By the time everything was cleaned up and put away it was 8 PM and we were both tired.  I continued to research engine and transmission gauges while Linda read and played word games.  I also revisited the SonyAlphaRumors website but there was absolutely NO new information on the a99-II.  I went to bed wondering if this camera will ever actually exist.  Based on the comments I see online I am not the only one wondering if this camera will ever be a reality.

One of the hundreds of vendors at the Tyson Wells market area in Q.

One of the hundreds of vendors at the Tyson Wells market area in Q.

 

2015/01/05 (M) VSWR 1.0

Yesterday we finished up the coffees we have been using since we left Michigan at the end of November so this morning I had to open new bags and transfer the contents from their vacuum sealed bags to our metal storage canisters.  I had Teeko’s roast Ethiopian Yirgacheffe regular and decaffeinated separately, so I opened 1/2 pound bags of each.  I also opened a 1/2 pound bag of our special Sweet Seattle Dreams, which is 1/2 Sweet Dreams (decaf) and 1/2 Seattle Blend (regular).  I then made a pot of Ethiopian Yirgacheffe 1/2-n-1/2 while Linda prepared our granola with fresh bananas and fresh blueberries.

 

Linda went for her morning walk while I continued to do online research regarding the enigma known as the Sony a99-II DSLT camera and the supposedly discontinued, but apparently still very much available, Sony alpha a99.  If I did not already have a nice assortment of compatible Minolta A-mount lenses and flash equipment I think I would stop wasting my time with Sony cameras.  But I do, and so I continue to wait and be frustrated along with thousands of other “enthusiast” (sub-professional) photographers.  Because Sony builds the image stabilization (anti-shake) feature into the alpha bodies instead of the A-mount lenses the feature is available even with older Minolta lenses and the new lenses are slightly less complicated and less expensive than the Nikon and Canon lenses, which have the image stabilization built into each lens.  I think this was one of Sony’s best innovations.

 

I also continued to look at automotive gauges and sending units and decided to call Bill Gerrie (in Ontario, Canada) to follow up on his reply to an e-mail I sent a few days ago.  We had a great chat and he was able to clarify some things and add quite a bit of specificity to his written reply.  As a result I have a pretty good idea of what I am looking for; now it’s just a matter of finding it and deciding to place the order.

 

I was starting to work at my computer when Linda returned from her walk.  She eventually fixed a couple of vegan hot dogs wrapped up in tortillas with mustard, onions, and relish.   As I was finishing my meal I got a call from Gary Hatt at BCM.  He recently acquired an Eagle bus conversion and had some questions about the air-conditioners and the Aqua-Hot.  He plans to be in Quartzsite next to week and we are looking forward to finally meeting in person since I have been writing articles for the magazine for almost two years.

 

Linda has been having a problem with the brightness (or lack thereof) of the touch screen on her 19 month old Windows 8.1 Samsung laptop.  It will go very dim for no apparent reason and cannot be adjusted.  There was a driver update available for the Intel HD Graphics processor so we downloaded it, installed it, and re-started her computer.  The screen was now bright, which was more useful than dim, but still not adjustable.  That could be a coincidence or a fix, we will have to wait and see.  Even though it was working (for now) I drove to the local Family Dollar and bought an HDMI cable and some lightly carbonated water.  (The water had nothing to do with Linda’s laptop computer display, we were just low on sparkling water.)  The cable will allow us to connect her computer to one of our two flat panel LCD (LED) TV/monitors if needed.  (We did that after dinner and it worked, mirroring the built-in display to the monitor and setting the resolution to match the monitor’s 1900x1080p native mode.  But it also caused the built-in monitor to dim, although not as much as before.  When we turned off the monitor and unplugged it the built-in display did not return to full brightness.)

 

Mid-afternoon I saw Butch working on his Tarheel screwdriver antenna so I inquired as to what he was doing.  He had connected his MFJ VSWR meter to it through a six foot length of coax.  He had also unplugged the control harness for the tuning motor and rigged up a temporary switch to extend and retract the antenna.  He had done this because he was getting meter readings when connected through the installed coax that indicated the antenna was not resonant at any frequency or that the meter was not working correctly.  I climbed up on his ladder to have a look and saw VSWRs that were often greater than 31:1, and never fell below 10:1, with complex impedances that were rarely 50 ohms and with both resistance and reactance values that were all over the place.  Clearly something was not right.  It was not his installed coax and I was fairly certain I was not his meter, which I had used back at their house to check the VSWR on his CB and 2m ham antennas.

 

I climbed onto the roof of their bus so it would be easier to reach things and I could work sitting down.  We tried adding a ground strap as a counterpoise but it didn’t help.  Butch then grounded the strap to the chassis at the motor but that did not help either.  Our concern was that the antenna was not sufficiently bonded (grounded) to the roof but nothing we tried made any difference.  I decided to set the antenna to its shortest length (highest operating frequency), set the meter to a lower frequency, and then slowly lengthen the antenna, thereby lowering the operating frequency, while looking for some sort of response on the meter.

 

I got no change on the meter and finally realized that the antenna (via the meter) was behaving as though it was not grounded.  I noticed what looked like a thick washer between the SO-239 antenna connector and the base mounting plate of the antenna.  The mounting plate is the ground reference for the antenna and is connected to the base of the antenna through a coil of insulated wire (an inductor) known as a base loading coil.  The spacer was a plastic insulator that was, indeed, preventing the case of the SO-239 antenna socket from making contact with the mounting plate.  As a result the antenna was not grounded through the coax cable shield, preventing the meter from obtaining meaningful readings.

 

We removed the antenna connector, removed the insulated spacer, reassembled the connector to the antenna, reattached the coax and meter, and took additional measurements.  This time we got excellent readings that made very good sense.  We checked the upper bound, lower bound, and the midpoint of most of the high frequency (HF) ham bands and were always able to obtain VSWRs of 1.3:1 or less, which was excellent.  Butch had been considering redoing the mounting of the large motorized fold-over base so it was a good thing we figured this out as it saved him a lot of unnecessary work.  If I can solve one problem without creating others I figure it’s a good day.  BTW:  VSWR stands for Voltage Standing Wave Ratio and 1.0 is not a beta version, it is shorthand for a ratio of one-to-one (1:1), which is the best SWR you can have.  Anything below 1.5:1 is considered excellent, below 2.0:1 good, and below 3.0:1 usable if that’s the best you can do.

 

Chayote is a fruit that is a member of the squash family and is related to other gourds such as melons and cucumbers.  Linda bought one last week when we went to Albertson’s grocery store in Blythe, California and decided to prepare it for dinner tonight.  She sliced it into long thin broad strips and sautéed them with onions, oregano, salt, and pepper.  She served it alongside the leftover mock (vegan) stroganoff with a glass of sangria.  Our wine friends can cringe all they want; we find the Vella and Franzia boxed wines generally agreeable and the sangrias go surprisingly well with a variety of dishes.  And it has me drinking red wine, so it’s healthy too!

 

We lost our WiFi connection this evening.  Not sure why.  The wireless gateway still shows up in the WFR list but won’t associate with the WFR.  Butch had the same problem at the same time so something obviously changed.  We will ask Barb to open the trailer tomorrow, or get Jim to do it if she is not comfortable, so we can reset the gateway.  Hopefully that will do the trick.

The sunsets in Quartzsite are amazing almost every night. This shot was taken from our campsite in Q.

The sunsets in Quartzsite are amazing almost every night. This shot was taken from our campsite in Q.

 

2015/01/06 (T) You’ve Got Mail (Maybe)

 

Our mail situation here is interesting.  Remember that, per our Jamaican tour guide, we do not have problems, only situations, and situations are easier to deal with if I regard them as interesting rather than annoying.  With regards to receiving mail, the “situation” is as follows.  Although every structure in town has a street address—necessary for police, fire, EMS, trash collection, and other municipal services—the Quartzsite post office does not deliver mail to said locations.  They have an annex building on the northeast side of town that is nothing but P. O. boxes and all of the locals, and a lot of seasonal residents (including Joe and Connie, who own the property where we are staying) have a P. O. Box.

 

Where things get interesting is that the main post office and the street addresses are associated with one ZIP code but the P. O. boxes have a different ZIP code.  If something is coming to us via UPS or FEDEX we have to use the street address and associated ZIP code, but if it is being mailed to us USPS we have to use the P. O. Box number and associated ZIP code, or have it sent c/o General Delivery using the main ZIP code.  To confuse matters further, Joe and Connie had to return to Nevada because of Joe’s health and are having their Quartzsite mail forwarded back to their home, so we cannot have mail sent to us “care of” them as we originally planned as it just gets forwarded to Nevada.  Outbound mail does not appear to be a problem, but then why would it be?

 

The other situation that developed yesterday was that our WiFiRanger Mobile Ti disconnected from Joe and Connie’s WiFi (DSL) gateway and would not reconnect.  The WFR is telling us that the WPA password may be incorrect, but that is unlikely as we have been using it since we arrived last month, as have Butch and Fonda who also lost their connection yesterday and could not reestablish it.  The evidence suggests that the gateway needs to be reset.  Why?  Who knows?  DSL gremlins perhaps.  Or mischievous Internet fairies.  Or a problem with the local DSL service?  Or perhaps Butch keyed up his 600 Watt linear HF ham radio amplifier and blew out every wireless DSL router within a quarter mile?  Whatever the cause, once we can get Barb or (brother) Jim to open the trailer we will power cycle the gateway and see if that restores our ability to connect to it.

 

In the meantime, in order to get online last night and again this morning, we turned on our Verizon MiFi.  The Verizon signal here is strong and steady, and the data rate is much faster than the DSL/WiFi connection, but we only have a 4 GB data plan so we tend to use WiFi when available.  It is not always available, of course, especially while traveling (and especially if we are boondocking at Wally World or other such locations) and when it is available it is not always reliable or is so slow as to be useless.  This can be the situation, for instance, at larger RV rallies and even some RV parks.

 

So we logged into our Verizon Wireless account, looked at our current plan, and saw that for a mere $10 more per month we could increase our data plan from 4 GB to 10 GB.  The cost for exceeding your monthly data plan limit is $15/GB, so the extra $10/month was a no-brainer.  And VZW made it soooo easy to change our plan (once we were logged in); just click the data plan we want, review changes to our account, and click “Apply Changes.”  Done; they have our money and we have more data allocation.  Interestingly, they upped our data allocation immediately for the current billing cycle, which is Dec 20 – Jan 19, and added the $10 to the bill we will receive for that cycle.  No pro-rating going on here, but then we can use the whole 10 GB if we want/need to.

 

Interestingly the cost to go from 10 GB to 15 GB was an additional $20/month, so the 10 GB plan seems to be a sweet spot after which you pay a premium for additional access.  On the one hand Verizon wants to sell you data bandwidth but on the other hand there is a finite amount of data they can move through their network, so if you want to use a larger chunk of their capacity it figures that it would come with premium pricing.

 

Until a few months ago Millenicom was reselling 20 GB MiFi plans (on Verizon’s network) for $70.  It was the best deal around; a sufficient amount of data for the same price we were paying Verizon for only 4 GB.  Kind of unfair, when I think about it.  Well, Verizon decided to stop selling bulk capacity to Millenicom (and other MVNAs?), took all of the accounts in-house, and Millenicom went out of business.  Not really a big surprise when you think about it.  Verizon also notified those customers (as I understand the situation) of their “options” which were not, apparently, as attractive as the deal they had with Millenicom.  Not really a big surprise when you think about it.

 

Anyway, we will see how we do with 10 GB/month while we are on the road.  We can change back to our 4GB plan when we get home, but I doubt that we will, and we can increase it to 15, 20, or even more GB per billing cycle if we need to, but that is unlikely.  We have an AT&T landline at home with DSL service that provides an “always on” Internet connection (when it works).  It has a 150 GB/month data allowance and allows us to monitor and control our whole house generator and WiFi thermostat.  We have discussed adding a security system and a personal weather station linked in to Weather Underground’s Wundermap when we get home.  I don’t think our DSL connection is fast enough, however, that we could use 150 GB in a month if we tried.

 

Linda went for her morning walk and I made a quick run to Barry’s Breads.  Barry is a really nice older gentleman who has a small bakery stand on the north side of Kuehn Street east of Central Avenue.  Just behind the stand, however, is a larger trailer in which he bakes all of his products.  Those products include breads, rolls, savory items, and sweet goods.  Most of his products use butter, cream cheese, cheddar cheese, or ranch dressing, but his Basic Bread is just that, flour, water, sugar, salt, and yeast.  I have had some difficulty figuring out what time of day to stop by but this morning he finally had loaves of bread, and some hamburger buns made from the same recipe, so I bought a loaf and a pack of four buns.

 

When I got back I started working on another article for Bus Conversion Magazine.  A little over a year ago I installed an RV-Critter Guard to seal around the shorepower cord and water hose where they enter the utility bay through the floor.  I took a few pictures during the installation and have had the article on my “future” list ever since.  By the time Linda got back from her walk I had the article mostly finished and was starting to look at the photographs.

 

She had stopped at the Salvation Army store, which was open, to use their facilities and ended up buying a grocery bag full of clothes for $1.  Not $1/item, $1 for the entire bag.  Most of the items were tagged with color codes indicating prices of one or more dollars each but they had too much inventory and needed to move some product.  They told Linda that when that happens they have their $1 bag sale.  Deal.  She called Butch and Fonda to let them know and I think they headed there before going to check the post office box and then stop at the post office if needed.

 

Linda cooked a couple of our Boca vegan mock hamburger patties and served them with fresh sliced onion, lettuce, and pickles on two of the buns I had just purchased.  Not an entirely WFPB meal, but very few of our meals are.  Still, we try to get as much plant-based whole foods as we can every day.

 

Linda went for a second walk after lunch and headed down Central Avenue towards the Kuehn Street markets.  She is so fond of her 5.5″ Hammer Stahl Santoku knife that she wanted to buy the 3.5″ paring knife if Cutlery by LeClaire had it for sale as an individual item.

 

While Linda was gone I finished working on the photos for my RV-Critter Guard article.  When she returned from her walk she had both the Hammer Stahl 3.5″ Paring Knife AND the 3.0″ Birdsbeak Paring Knife.  As we learned the other day from an Alton Brown video paring is actually a technique in which food is held in one hand and a knife in the other; no cutting board is involved.  Paring knives are generally smaller with a shorter blade and most of the weight is in the handle, allowing very fine control of the cutting edge and tip.

 

The Birdsbeak is a particularly interesting and unusual knife.  The bottom/cutting edge is slightly concave rather than convex like the classic chef knife.  The bottom edge joins the top edge in a point with a shape that resembles certain types of curved bird beaks.  In use, the knife is often held stationary and the food is pressed or turned into it, such as decorative peeling, pitting of fruit, or slicing strawberries.  Linda is often reluctant to spend money on herself so I think it’s nice that she found something she wanted and made the decision to buy it.  Like any high quality tool it will make the work it is designed to do easier and more enjoyable.

 

While I was uploading my article to our Dropbox Linda went outside to sit.  Barb wandered over and I mentioned that the DSL wireless Internet gateway had quit working.  She let me in the trailer where I found it sitting on the dining room table.  I powered it off, waited 60 seconds, and powered it back on.  All of the status lights came back on in the expected sequence and I was once again able to connect our WiFiRanger Mobile Ti to it.  We ended up standing by their Country Coach Intrigue motorhome and having a long chat.

 

Butch and Fonda were gone for most of the afternoon so we only got to chat for a little while when they returned before the sun dropped behind the southwestern mountains and the temperature dropped along with it.  Linda and I talked about going out to dinner, which we have only done once since we got here, but she remembered that we had a FedEx package scheduled for delivery today and that it might arrive as late as 8 PM.  So we had leftover soup with crackers and sangria.  This was the third and final meal we got out of this pot of soup and it was good to the last drop.  It was a packaged mix but Linda thinks she can recreate it; getting the spices right will be the tricky part.

 

After dinner I read DSLR reviews on the Digital Photography Reviews website and continued to look at gauges and sending units for the bus.  Around 8:30 PM I was having trouble staying awake but by 9 PM I had gotten my second wind and decided to write another short article for BCM.  This one was on the failure of Butch and Fonda’s main engine air-compressor on the drive down, how he dealt with it on the road, and eventually ended up installing a rebuilt one here at our campsite in Quartzsite.  I had the article written by 11 PM and decided to work on the photos tomorrow.

Sunset envelopes our coach as Linda prepares dinner.

Sunset envelopes our coach as Linda prepares dinner.

 

2015/01/07 (W) Catch 22

 

My main pair of reading glasses broke yesterday; not the lenses or the frame, but one of the nose pads.  Well, not the actual pad, but the small plate and mounting loop, specifically the mounting loop.  I was cleaning them and the whole assembly fell out.  The loop was split and had opened up.  The loop was a very small and delicate piece of ductile metal so I squeezed it back into a circle.  I removed the very tiny retaining screw, reinserted the mounting loop, and put the screw back in.  I was able to do this using only the tools available on my Leatherman.  The repair did not hold and it fell out again last night.  This time a piece of the loop broke off so the only repair will be a new mounting pad if I can find one.  There is a Wal-Mart in Parker that probably has an optical shop but I don’t know how universal this mounting system is.

 

I checked the level of the floor and counter in the kitchen last night and the coach appears to have settled slightly on the driver side.  Not a lot, but enough that I can feel it and it registers on the level.  I generally have to start the main engine and build up full air pressure in order to level the coach but I thought today would be a good day to finally pull the portable air compressor out of the car and see if the leveling system will work without the main engine running.  As it turned out that did not happen today because we ended up driving to Parker, Arizona.

 

Our destination in Parker was the Wal-Mart.  The store did not have an optical department but we found an eyeglass repair kit in the pharmacy area with a pair of screw-in pads and a pair of snap-in pads.  They also had a repair kit with a tiny screwdriver, spare screws, and other parts.  Between the two kits I was able to install a new pad in the car to replace the broken one.  That saved us a trip the optical shop in town.

 

Parker sits on the Arizona side of the Colorado River which is the boundary with California.  We decided to drive across and then take CA-62 over to US-95, follow it south along the River back down to Blythe, and then take I-10 back to Quartzsite.  Butch called while we were in Parker to let us know that there was a Farmer’s market at Desert Gardens.  It operates on Wednesdays from 8 AM to noon so we did not make it back in time but resolved to go in future weeks.

 

I worked on my “roadside repair” article for BCM while Linda went for a walk.  Jim and Barb had gone to Blythe to buy a new faucet and Jim L. stopped by and helped Jim B. install it.  They borrowed a caulk gun from us (we carry two in the bay) but had to go buy caulk.  UPS showed up with yet another package for us, after which we had a long conversation about the inadequacies (incompetence) of the U. S. Post Office in Quartzsite.  (The UPS driver told me that both UPS and FedEx have extra drivers and trucks delivering into Quartzsite during the peak season.  What a novel idea.)

 

Back to the post office.  We are waiting for a shipment of two bottles of water hardness test strips that we ordered through Amazon but were shipped via USPS by a swimming pool supply company in Elkhart, Indiana.  I gave them the P. O. Box here in Q since the post office does not deliver mail to street addresses and it appears that they will likely get returned to the sender rather than delivered to us.  The root cause of the problem (and it is a problem) is that Joe and Connie are having their mail forwarded to their home in Nevada.  If their names are not on the mail the post office won’t put it in the box, but if their names are on the mail it still does not get put in the box, it gets sent to Nevada.  So as of now the box is sitting there but cannot be used; a genuine “catch 22.”

 

Fine, we will just use General Delivery.  The problem with that (and it is a problem) is that you can only pick up the GD Mail at the Quartzsite post office between 11AM and 1 PM, and there are untold numbers of people trying to do the same thing.  That means ridiculously long lines and ridiculously long waits.  Considering that the influx of seasonal “residents” to Quartzsite has been going on for over 30 years the postal “service” has had ample time to figure out how to handle the situation.  I mean, Amazon practically runs its holiday operations with seasonal employees, many of whom are RVers.  Gee, I wonder if there are any RVers around Quartzsite this time of year.  While the post office is trying to figure out how to not deliver our mail we have two more UPS shipments scheduled to arrive on Friday.

 

Linda made a zoodle dish for dinner.  She used her SpiraLife to turn a zucchini into long thin strips which she cut into 6″ lengths and then used like spaghetti in the dish.  The other ingredients were onions, garlic, mushrooms, asparagus, and green beans.  Everything got sautéed in a pan with a little olive oil, salt, and pepper.  We had a glass of Lamb’s Valley Organic Sweet White wine and it was a lovely meal.

 

After dinner I put the finishing touches on my BCM air-compressor repair article and e-mailed it to Butch to proof-read.  The only thing worse than writing an article that makes me look stupid is writing one that makes someone else look stupid, especially a friend.

 

I had an e-mail from Gary, the publisher of BCM, letting me know that the December 2014 issue was finally available online.  I downloaded both the SD and the HD versions.  I then clipped the cover from the SD version, pasted it into MS Paint, and saved it as a JPEG file.  I opened it in Faststone Image Viewer, resized it to a thumbnail, and sharpened it.  I then edited the BCM page on our website, adding the thumbnail image, the title of my article, and a brief description.  I have a similar entry on that page for every issue in which I gave had an article, starting with the February 2013 issue. The December 2014 article was my 14th in 23 months.

The last glow of this sunset reflects off the passenger side of our motorcoach in Quartzsite, AZ.

The last glow of this sunset reflects off the passenger side of our motorcoach in Quartzsite, AZ.

 

2014/11/10-16 Even More Bus Work

Leave a reply

2014/11/10 (M) New Heights

We rarely set wake up alarms anymore, one of the major perks of retirement, but ‘rarely’ does not mean never so this morning my alarm went off at 5:05 AM.  I grabbed a quick shower, got dressed, and got busy pulling everything together for the trip to Twelve Mile, Indiana.  I had hoped to be on the road by 6 AM but did not quite make it.  Linda left at 6:15 AM for a 7:30 AM medical appointment and I had the car packed by 6:30 AM and pulled out shortly after that.

The drive always takes me about five hours including stops.  Butch called me around 10 AM to let me know they were in Logansport and would not make it back to the house until mid-afternoon.  I was going to stop in Rochester anyway to buy groceries so I had lunch first and then took my time shopping.  From Rochester I took IN-25 south and stopped in Fulton to buy fuel.  The street I normally turn on is Aitken and the filling station was at the intersection with IN-25 so I headed east to Meridian Street and then south to IN-16 and finally east to Twelve Mile.

New ride height linkage (L) with ball ends. Old linkage (R) with rubber ends.

New ride height linkage (L) with ball ends. Old linkage (R) with rubber ends.

I pulled up in front of the bus at 12:30 PM and unloaded all of the groceries and bus parts from the car and put them in the bus.  I changed into my work clothes and started working on inside projects.  First up was resetting the clocks since the switch from EDT to EST occurred while I was away.  I then emptied the cabinet above the refrigerator, which is currently used to store cleaning supplies, in preparation for installing an under cabinet florescent light fixture against the ceiling.  I was investigating the details of that little project when Butch and Fonda got home.  With the house now unlocked I finished unloading my car and moved my clothes and technology into the guest bedroom, which is where I stay when I am here working on buses.

Butch had fabricated one of my ride height linkages while I was away.  He made a second one and then I gathered up tools and my camera to install them while he finished the last one.  Fonda found a large sheet of corrugated plastic that made it much easier to slide under the bus to work.  The front one was easy to install, just as it had been easier to remove.  The rear ones were even more difficult to install than they were to remove.  I got the rear protection shields back on with Fonda’s help.  Some jobs just require more than two hands.

New ride height linkage ball end and mounting bolt. Old linkage end visible upper right.

New ride height linkage ball end and mounting bolt. Old linkage end visible upper right.

Bill Tharpe showed up to help Butch work on Brittiny’s car.  Butch and Bill had retrieved it a couple of days ago with a car hauler trailer when it quit running.  It was leaking coolant and apparently needed a new intake manifold gasket.  Bill spent most of his time disassembling the top of the engine so he can eventually remove the manifold.

Although I bought fresh salad greens on the drive down it ended up being a long day so I prepared a Simply Asia Mushroom Noodle Soup Bowl for dinner along with a few grapes.  Linda called at 8:30 PM and we chatted about her audiology and ENT appointments this morning.  The audiologist said her hearing in her ‘good’ ear was essentially unchanged from four years ago, which was good news, and she had a great visit with Dr. Siedman.  I chatted briefly with Butch about the fair weather ‘to do’ list for tomorrow and then we all turned in for the evening.

2014/11/11 (T) Code 23

I was up at 7 AM and in my coach by 7:30 having a simple, but yummy, breakfast of orange juice and homemade granola with unsweetened soy milk.  With all of the projects I have going on I have very little space at the moment to prepare food or sit and eat so I decided to forego making coffee and walked across the street to Small Town Brew to get some.  Lisa (the shop owner) was there so we had a nice chat.

New ride height linkage installed on front axle and leveling valve.

New ride height linkage installed on front axle and leveling valve.

The weather forecast indicated that the best part of the day was going to be the morning with the high temperature of 54 degrees F at noon and then falling steadily with a rapidly increasing chance of rain.  I had two outside tasks to accomplish on my bus today so I wanted to get them done in the morning if possible.  My first task, however, was to attach the stinger (or whip, the long slender flexible piece at the top of an amateur radio antenna) to the base screwdriver portion of Butch’s mobile HF ham antenna.  I was able to do this from his ladder and did not have to get up on the roof.

While I worked on the antenna Butch prepped their new motion-sensing patio light.  He installed it over the entrance door to their bus with Fonda’s help.  With his assistance I removed the new fan belt from my engine, removed the two old air-conditioning compressor belts, and installed the two new a-c belts.  It was obvious from the extra slack in the inside belt that the a-c compressor was out of alignment with the pulley on the engine.  Butch suggested that we take the new belts off rather than ruin them and put the old ones back on until we can align the compressor.  That made sense to me, so that’s what we did, finally putting the new fan belt back on.

The drive side rear ride height linkage was not easy to get to with the dual drive tires on the axle.

The drive side rear ride height linkage was not easy to get to with the dual drive tires on the axle.

In the process of changing the belts I tried to us the valve that either tightens the belts when the engine is running or retracts the belt tensioners when they need to be changed.  The retract position did not appear to work and after looking at how the valve was plumbed Butch and I were of the opinion that it may not be connected correctly.  The run/tighten position works as intended, extending the air-driven belt tensioners, but it would sure be nice to be able to turn the valve and have the belt tensioners retract as intended.  I’m going to have to find out more about this valve and re-plumb it if necessary.

Butch and Fonda had to take some time to move things out of their warehouse for someone who is coming by to purchase them.  While they did that I started working on the DDEC II code 23 (Fuel Temp Sensor Voltage High) problem.  I got the diagnostic procedure from Chuck over the weekend.  The first step was to remove the harness from the sensor, short out the two pins, turn on the ignition (but do not start the engine), and see what Active Codes the ECM (DDEC II) generates.  That sounded simple enough but unfortunately the Fuel Temperature Sensor is located on the right side of the fuel pump under the ECM and behind a coolant pipe.  The only way to get to it is to unbolt the ECM mounting plate from the block and lift it up, which it turn requires all of the harnesses to be unplugged from the ECM.  Again, simple enough in concept but more difficult in practice.  Once I could get to the sensor and disconnect the harness I had to figure out a way to jumper across the two sockets.  I ended up using two pieces of small solid wire inserted into the connector and then bent to give me something to connect the alligator clips to.  Fonda helped with all of this.  Again, it was more than a two-handed job.

Access to the passenger side rear ride height linkage was a little better, but not great.

Access to the passenger side rear ride height linkage was a little better, but not great.

I turned on the ignition and read the Active Codes on my ProLink and also had them flash on the Check Engine Light.  I was looking for a code 25 (everything is OK) or either a code 23 or a code 24.  What I got was both a code 23 (sensor signal and/or return wire open) and a code 24 (signal wire shorted to +5 VDC wire).  The diagnostic procedure has you check resistance between pins in either case, just different pins, so I checked both.  The readings I got did not make a lot of sense and I did not have time to pursue it further as the temperature had started dropping and it had started misting.  (I figured out later that the code 23 test requires the jumper to remain in place but I had done the code 24 test first, which required it to be removed, and not reinstalled it, so I did not do the Code 23 test correctly.)

By the time I got the ECM bolted back in place and all of the harnesses reconnected it was raining lightly and my tools were getting wet.  I got all of them put away and closed up all of the bays and decided to start the engine to make sure it would still run.  It started right up and I let it run on high idle for 25 minutes while I had a bite of lunch.  The test procedure called for clearing all codes before starting the engine and monitoring the CEL for 8 minutes, stopping the engine, and checking the historical codes.  I was clearly done working outside for the day so I did not get to do this at this time.

It was only mid-afternoon when I shut the engine off so I set to work installing the florescent light fixture in the cabinet above the refrigerator.  As with most projects this one seemed simple enough but took quite a while to do.  I was able to use an existing hole with wires running through it to snake two more wires through from the cabinet (where the fixture was going) to the adjacent cabinet to the right over the left corner of the kitchen counter.  That cabinet already had two 12 VDC light fixtures and I had previously identified the positive and negative supply wires.  What complicated matters was that the glue holding the carpet on the ceiling of the refrigerator cabinet had failed and the carpet was falling down.  The loose carpet also led to the discovery of other 12 VDC wiring hidden underneath it.  That, in turn, led to two things:  1) I had to make sure that when I mounted the new florescent fixture I did not screw through any of these wires, and 2) I had to figure out a way to keep the ceiling carpet up.

The sunset was amazing on November 10th.

The sunset was amazing on November 10th.

I taped the existing wires to the plywood ceiling so they would be in known locations.  I then used wood screws and fender washers to hold the carpet to the ceiling.  I added insulated spade lug connectors to the fixture wires and the supply wires and connected the other ends of the supply wires to the existing supply wires using special connectors designed for tapping into an existing wire without cutting it.  I would not use these for higher current applications but for a small florescent light fixture they are fine.  I attached the fixture to the ceiling with four short wood screws, installed the F13T5 bulb, turned the switch ON, and there was light!  I love it when that happens.

As long as I was working in this area I decided to reattach the incandescent fixture in the cabinet above the kitchen sink.  It was designed to be mounted with two screws but only one was in place.  Again, this turned out to be more work than it at first appeared.  The fixture is mounted to the inside of the upper cabinet face frame, not the ceiling, so there was no way to directly see what I was doing.  That meant mirrors and flashlights, and a blown fuse when my screwdriver shorted +12vdc to DC ground.  It turned out that the wiring was interfering with the mounting.  I eventually got it tucked up under the ceiling carpet and got the fixture mounted using two screws.  My documentation indicated that the upper kitchen cabinet lights were powered by wire #51.  I located that wire in the front DC distribution panel and pulled the 10 Amp fuse that protects it.  It was indeed open, which was good as it meant my documentation was correct and allowed me to find it on the first try.

The florescent light in the hallway ceiling cove quit working the last time I was here.  I removed the bulb, with some difficulty, to see what it was.  It was an F72T12 55 Watt (72″ length) with a single pin on each end.  I needed a 10 A blade fuse to replace the one I blew so I made a shopping list and headed off to Logansport to visit Walmart, O’Reilly’s Auto Parts, and Home Depot.  Since I was in town I called Linda as my cell phone does not work in Twelve Mile.  She wanted to know if I had shut off the outside water at home.  I had not, so she took photos of the valves/pipes in the utility room and e-mailed them to me.  I got a call from Butch while I was in town.  He needed a few machine screws so I picked those up.  When I got back to the house I checked the photos Linda had sent and then sent her a couple of replies which resulted in her calling the house to go through what had to be done.  She e-smiled me later that she had taken care of it.

I Replaced the F72T12 (with considerable difficulty) but it still did not work.  It was late, and dark, and I was tired, so finding and fixing the problem would have to wait until tomorrow.  Somewhere in there I had a tofu Italian sausage on a whole wheat hotdog bun with mustard and onions.  By the time I came in to the house Butch and Fonda had gone to bed.  I checked e-mail and logged in to RVillage ad saw that our “Vegan RVers (WFPB)” group was up to 100 members.  I worked on this post and then went nighty night.

2014/11/12 (W) Burrrr

The leading edge (cold front) of the polar vortex had passed through north central Indiana by the time we got up this morning.  There was a definite bite to the air, and it will get worse before it gets better, but I brought a selection of winter clothing that I can layer in various was to suit the conditions and the work that needs to be done.  All of my projects today were inside the bus or the house so I did not have to bundle up excessively.  Butch and Fonda spent a little time working on the privacy curtain system for the front of their coach but much of their time today was taken up with someone who bought a lot of metal shelving and storage racks from them.  He showed up sometime between 9 and 10 AM and brought a crew to disassemble the shelving and load everything into a trailer.  Butch had to use his forklift to help load some it.

The DDEC II ECM on our DD8V92TA with all of the harnesses unplugged.

The DDEC II ECM on our DD8V92TA with all of the harnesses unplugged.

I had cleared some space in the kitchen (of the bus) so I made coffee to go with breakfast.  That emptied out the last of three storage canisters, so I opened the three bags of custom roasted beans from Teeko’s and transferred them to the three containers.  After considering my project choices I decided to install the knob on the front TV cabinet door.  I spent a few minutes checking the installation details and dimensions of the Gaggenau halogen cooktop, which we would eventually like to replace with a built-in two-position induction cooktop if we can find one that fits the existing opening in the kitchen counter.  I had a note to get the GenSet model number for Martin Diesel so I looked that up in my documentation and found both the model and serial numbers.  I then turned my attention to the fluorescent light fixture in the hallway cove.

After studying the construction of the cove I realized that the front piece could be detached by removing seven (7) screws from underneath.  With the fascia removed I had great access to the F72T12 bulb.  I also discovered that there wasn’t an actual fixture there, just two ends to hold the bulb.  One was spring loaded and the other one was not.  The ballast was obviously somewhere else.  But where?

I vaguely recalled having seen a small metal box with wires coming out of it in the space under the bottom shelf of the pantry so I looked there and, sure enough, there it was.  It still had a label on it that was in good condition and indicated that it was a 13.2 VDC ballast for a single F72T12 fluorescent bulb.  Things were slowly starting to make sense.  There is an identical box in the back TV cabinet, with the same wires and connector but no label or markings, so I reasoned that it must power the fluorescent cove light in the bedroom.  That meant there were probably two more boxes somewhere for the two front fluorescent cove lights, although there might only be one as they are on the same switch.  Again, I vaguely recalled having seen these boxes in the bottom rear of the A-V cabinet behind the driver’s seat, so that’s where I looked first, and there they were.

Wire taps for joining a new wire to an existing wire.

Wire taps for joining a new wire to an existing wire.

It appeared that we had a bad ballast and that this would be an easy fix.  The label said the ballast was a Triad made by Magnetek in Huntington, Indiana and had the model number.  Cool.  I could drive over there and get one if I had to.  I went inside to use my iPad to search for sources of supply and found that Magnetek had divested itself of most of their product lines, including this one.  Their website gave the URLs of the various companies that acquired their product lines.  Universal Lighting picked up the DC ballast products so I tried their website but did not find one for an F72T12 bulb.  Ugh.  I searched some more and eventually found a Bodine (Philips) ballast electronic/inverter ballast that appeared to be exactly what I needed…for $98 plus tax and S$H.  Double ugh.

I would eventually like to convert most of the lighting in the coach to LEDs, so perhaps this was the time.  I found a kit with 52.5 feet of LED rope light (~10 LEDs/in) and power cords, end caps, and mounting clips to make up to 10 segments.  The description said the light pattern was 360 degrees and the illumination was 48-60 lumens per foot.  An FTC website indicated that a typical 40 W incandescent bulb puts out about 450 lumens and a 60 W bulb about 800 lumens.  Figuring conservatively at 50 lumens per foot a 10 foot length, folded back mid-point to make a five foot long light source, should give us at least 500 lumens which is plenty of light for this application.  The kit has enough materials to make four such lights and still have 12 feet to use somewhere else, such as around the inside of the face frame of the wardrobe closet in the bathroom.  I ordered it with 3-day shipping.  While I was at it I ordered an Everpure (SHURflo) ADC Full-timer bacteriostatic water filter cartridge with 2-day delivery through Amazon Prime.  I thought about ordering several, but figured I might find them cheaper in Quartzsite this winter.

There wasn’t anything else I could do on the fluorescent fixture so I decided to shorten the cable for the front OTA TV antenna and put an F-connector on the RF coax portion.  I borrowed Butches crimper with the hex jaws and opened the coax cable stripper I bought at Home Depot.  I then discovered that the RG-6 connectors I had did not fit the cable, which was smaller in diameter.  Without different connectors this would be another stalled project with my front TV unusable.  Butch told me there was a Radio Shack store inside McCord’s Hardware and Lumber so I made a shopping list and headed to Logansport.

New florescent light in cabinet above the refrigerator.

New florescent light in cabinet above the refrigerator.

Based on the connectors available at Radio Shack I determined that my cable was probably RG-59 so I got four crimp style F-connectors.  While I was in town I stopped at Home Depot for a GFCI outlet to replace the one in the bathroom, which keeps tripping.  I also spotted some packages of cover plate screws so I got one each of white, almond, and brown.  A quick stop at Walmart for some personal items and I was headed back to Twelve Mile.

When I got back Fonda was just starting to make their dinner so I went to my coach to fix a salad.  I had a large salad of power greens, fresh mushrooms, fresh strawberries, onion, peanuts, and dried cranberries with a raspberry walnut vinaigrette dressing and a small glass of Moscato wine.  I then worked on the F-connector.

It took a while, and a couple of test fits, but I eventually figured out how to strip the coax, folding back the braided shield while leaving the foil shield in place, and get the prepped cable fully inserted into the connector and crimped it.  I stripped the three control wires, secured the little bit of extra cable inside the cabinet, and then connected the coax and control wires to the back of the controller.  Twelve Mile is a long way from everywhere but I figured I would I would test my cable construction by trying to tune in a channel.  The TV was having trouble receiving channel, 16-1 HD until I moved the antenna from position 8 to position 6.  Position 8 is just to the driver side of the nose, so given how I was parked it was facing slightly east of south.  Position 6 was more ESE, and the signal was good except when a truck went by.

Tarheel HF screwdriver ham radio antenna on motorized lift mount.

Tarheel HF screwdriver ham radio antenna on motorized lift mount.

I checked with Butch and WNDU 16-1 HD turned out to be a South Bend station.  South bend is north and slightly west of Twelve Mile.  Hummm?  I swung the antenna around to position 14, 180 degrees from position 6 and roughly NW, and had an excellent signal there too (I don’t recall it being interrupted by passing vehicles).  Clearly the F-connector was on well enough to transmit a clean signal.  The only thing I can figure is that my antenna had an unobstructed view of a large house in direction 6 that provided a very usable signal that was blocked by large trucks passing by.  Either way, South Bend is over 60 miles away, so propagation must have been very good this evening.

That was enough for one day.  I gathered up my dirty dishes and camera and returned to the house.  Fonda was just loading the dishwasher so I added mine.  I chatted a while with Butch about the DDEC II code 23 diagnostic procedure and the game plan for tomorrow and then turned in to check e-mail and work on this post.

2014/11/13 (R) Thermal Underwear

I slept in this morning so I skipped making coffee and after my usual breakfast went across the street to Small Town Brew to get some.  I then got to work on one of Butch’s projects.  We kept busy today including, in spite of the cold, some outside work.  Thermal underwear helped keep me comfortable.  I went back to STB and got a second cup of coffee around 10:30 AM.

I spent the morning helping Butch and Fonda with the wire chases for the bedroom in their bus.  Each chase is a pair of boards joined at a right angle to make a horizontal bottom and a vertical side.  They will each be mounted using a pair of aluminum angles, one on the wall for the bottom and one on the ceiling for the brackets for side.  My first task was to drill holes in the aluminum angles approximately every 12 inches.  I then helped position them, drill the holes for the mounting screws, and attach them to the bus.

Testing the DD8V92 fuel temperature sensor.

Testing the DD8V92 fuel temperature sensor.

Fonda and I moved three large wooden tables from the warehouse to the now mostly empty ‘parts room.’  All three of us moved a couple of loaded metal shelving units and then Fonda and I put the wooden tables in place.  I plan to move my all of the stuff I have in the (unheated) warehouse to the (heated) parts room tomorrow.

I worked on some minor projects in my bus and had a tofu turkey sandwich with vegan mayonnaise, lettuce, and onions.  I disconnected/removed the ballast for the bedroom fluorescent cove light and used it to test the hallway fixture.  The light worked just fine which verified that it was a ballast problem and not a wiring problem.  I needed to know that before I went to the trouble of converting this fixture to LED rope lighting early next week.  I put the good ballast back in rear TV cabinet and kept working in there, starting with the installation of the knob for the TV cabinet door.

I shortened the control/coax cable for the TV and installed the crimp-style F-connector.  Unlike the front TV (which was on and receiving WNDU Ch-16 from South Bend over 60 miles away) the rear TV was not able to detect any signals at any antenna direction.  The OTA antenna for the rear TV is in the rear roof tray and the bus is backed into its parking spot, so it is more shielded from radio frequency waves than the front antenna.  The only direction that might be good is straight ahead, which is due south.  Unfortunately there are no TV towers in the direction for a long way.

Magnatek 13.2 VDC ballast for F72T12.

Magnatek 13.2 VDC ballast for F72T12.

Butch decided to install the plate heat exchanger in the bay just forward of where the Oasis Combi is installed and needed my assistance.  The plate heat exchanger will be used to tie the Combi to the OTR bus heating system (engine coolant loop).  We also discussed possible locations for the coolant circulating pump that he plans to plumb into the OTR heating lines once he determines which line is the supply and which one is the return.

I returned to my rear TV closet projects while Butch started compiling a shopping list.  After stabilizing the back piece of plywood inside the cabinet with a couple of screws I mounted the Pressure Pro Repeater to it using a couple of self-adhesive Velcro pads that came with it.  I then mounted the dual 12 VDC outlet directly below the ballast and installed a small cube relay just behind it using its built in mounting tab.  Tomorrow I plan to connect the outlets to the relay and supply it with 12 VDC to power the repeater.  I also plan to figure out a way to drive the relay from a 12 VDC source that comes on when the 12 VDC chassis battery switch is ‘ON.”  For now, though, I will connect the outlets to the NC (normally closed) contacts so that power will flow to the outlets when the relay coil is not energized.

I was pondering my next project when Fonda let me know that Butch would be ready to head to town shortly.  I was considering how I was going to enlarge the two small openings that allow air to flow from the grate in the rear TV cabinet through the upper parts of the center cabinet and into the driver side corner cabinet where the rear air-conditioner evaporator and blower are located.  At Butch’s suggestion I looked up the specifications on the Carrier air-conditioning units; 14,000 BTUs and 465 CFM air flow.  Requirements for supply and return grates?  At least equal to the square area of the evaporator coils.  The coils are roughly 9″ x 12″, as are most of the grates.  The two small openings in the side walls of the upper closet, however, are 3″ x 10″, not nearly big enough.  This is what happens when buses are converted to “look nice” instead of to “work correctly.”

Passenger side rear corner TV cabinet with ballast, dual 12V outlet, relay, AC outlets, and PressurePro TPMS repeater.

Passenger side rear corner TV cabinet with ballast, dual 12V outlet, relay, AC outlets, and PressurePro TPMS repeater.

I rode into Logansport with Butch where we stopped at O’Reilly’s Auto Parts, Aldi’s market, and Home Depot.  We ran into Bill Tharpe at O’Reilly’s and saw his car again at Home Depot.  When we got back Fonda was putting the finishing touches on their dinner so I made a salad and selected a can of Amy’s split pea soup and a can of Mandarin oranges.  I returned to my coach, cleaned up the kitchen area, and locked up for the night.  I spent a few minutes studying Butch’s MC-9 manual and finally found the diagram that identified the engine coolant supply and return lines.  That was a nice way to end the day so I retired to my room to work on this post and transfer photos from the last few days to my computer.

2014/11/14 (F) Arctic Oasis Grandma

I bought a dried fruit stolen last night at Aldi’s and had a few slices for breakfast this morning.  No animal products, of course, but a few less-than-desirable ingredients like HFCS.  Still, it was very tasty and not something Linda would be likely to buy at home.  I brewed a pot of coffee with a mix of the Cafe Europe Blend and Columbian Decaf beans from Teeko’s.  I had some with the stolen and drank the rest over the course of the morning.

Stacked plate heat exchanger to left of Magnum 4024 inverter/charger.

Stacked plate heat exchanger to left of Magnum 4024 inverter/charger.

Most of our work today was focused on trying to finish the installation of the ITR Oasis Combi in Butch and Fonda’s MCI MC-9 bus conversion, and much of that work was outdoors.  The temperature was around 20 degrees F when we got up this morning and never broke the freezing mark.  It was sunny most of the day, however, without any wind and I was dressed for the conditions so I was generally comfortable in spite of the Arctic air mass sitting on top of us.

My first task was to mount the Zone Controller to the face of the ceiling tunnel above the Combi.  I then completed the cable connections and dressed the cables.  We then pulled the #10 2+g cable from the old Aqua-Hot bay to the Combi and I completed the connections for the 120 VAC electric heating element.  We pulled two lengths of two-conductor low voltage cable from the bedroom closet to the fresh water pump, which is mounted on a vertical plywood plate on the rear wall of the bay next to the Combi.  One cable brought +/– 12 VDC down from the 12 VDC distribution panel in the closet where the negative (DC ground) was connected to the pump.  The other cable was used to route the +12 VDC back to a switch in the closet and then return it to the bay where I connected it to the pump.  With this arrangement Butch has DC + and – in the bay and can add a switch later (or use a jumper) to turn the pump on from there.  Although a bit unusual there is nothing fundamentally wrong with wiring switches in parallel; it just means that ALL switches must be off for the device to be off.

While I was working on the wiring in the Combi bay, Butch and Fonda pulled a pair of #4 welding cables from the battery compartment to the bedroom closet to provide + and – 12 VDC to the low voltage distribution panel.  He and I then pulled the remote panel cable for the Combi from the bay up into the bedroom closet.  He took care of the connections at the remote panel while I took care of the ones in the bay.

Oasis Combi Zone Controller (top).

Oasis Combi Zone Controller (top).

With the Combi wiring done I took a few minutes to move all of the parts and supplies I had stored in their (unheated) warehouse into their (heated) parts room where Fonda had cleared some shelves for me.  By the time I was done Butch was ready to move to the next part of the Combi installation; running the coolant lines.  He discovered that his insulated heater hose would not fit over the fittings on the ends of the fan-coil heat exchangers but might fit if he cut off the enlarged swaged ends.  It turned out that the insulated hose still would not fit so he made a quick run to town for regular heater hose. Sometimes bus projects are just like that and you have to figure out how to make things fit and work.

While Butch was gone I spent some time working in the back TV cabinet of my coach.  I tapped into the +/– 12 VDC wires that supply power to the fluorescent light fixture to provide power to the dual 12 VDC outlets and relay I installed yesterday.  The DC negative went directly to the outlets and the DC positive went to the common terminal on the relay.  I connected the positive lead from the outlets to the NC (normally closed) contact on the relay.  All of the relay connections were made with insulated spade connectors.

When I can get a +/– 12 VDC chassis battery cable to the cabinet I will use it to control the relay and move the outlet positive connection to the NO (normally open) terminal.  With this arrangement, the power for the PressurePro Repeater will come from the house batteries (which are rarely switched off) but the unit will only be on when the chassis batteries are on.  For now, however, we will simply have to remember to plug the repeater in when we are going to drive the bus.

That's our bus!

That’s our bus!

As soon as Butch returned all three of us got busy working on the coolant lines.  First Fonda and I pulled the insulated lines out.  Butch then fed a standard line from the front heat exchanger through the floor to the front driver side bay.  Fonda and I then fed it through the access holes to the rear driver side bay and through the floor to Butch by the rear heat exchanger.  Butch connected the hose to rear heat exchanger.  He then pulled the line back up by the front heat exchanger as we removed most of the slack in the bays and connected it to the front exchanger.  Fonda and I fed a piece of hose along the back wall of Combi bay and up into the bedroom closet where Butch connected it to the rear heat exchanger.  I then routed the hose and Butch connected it to the Combi.  Butch fed a second hose from the front exchanger through the floor and we routed that one to the stacked plate heat exchanger one bay forward of the Oasis Combi.  He connected the hose to the front exchanger and I then climbed into the bay, routed the hose with Fonda’s help, and connected it to the heat exchanger.  Butch fed another piece of hose from the Combi bay to the bay where I was working.  I attached that hose to the heat exchanger and then Butch pulled out the slack and connected it to the Combi.  At that point we had a complete, closed loop with the three heat exchangers in series.  I think that was about when the UPS truck arrived with my SHURflo Everpure ADC water filter cartridge for under the kitchen sink.

It was time to make it work; sort of.  Butch had not tied the diesel fuel lines in yet, and the fresh water connections were also not done, but that did not matter.  The next step was to fill the coolant loop with coolant (anti-freeze) and purge it of air.  We thought we had to have at least one of the thermostat circuits active, and thought they worked by grounding the wire coming out of the Zone Controller, but figured out later that we had it backwards.  No harm done, just no good either.  Butch put the 3-way “Summer/Winter” valve in what he thought was the Summer position, which just connects the output (supply) port to the input (return) port, and turned the Bypass switch on the Zone Controller ON, activating the built-in coolant circulation pump.  The Combi was already full of coolant and in this configuration should have just circulated it internally.  Butch was watching the radiator cap and had additional coolant ready to add if any air got purged.  We could hear the pump running, but he could not see any fluid motion in the radiator fill tube.  Hmmm, yet another bus conversion mystery.

Close up of the dual 12VDC outlet and control relay in the passenger side rear corner cabinet.

Close up of the dual 12VDC outlet and control relay in the passenger side rear corner cabinet.

Butch turned the valve to the Winter position which is supposed to allow coolant to flow through the external loop.  This should have caused a drop in the reservoir level, requiring additional coolant, as the coolant was transferred to the coolant lines, but again, there was no flow.  The two heat exchangers in the house (living room / kitchen and bedroom / bathroom) have bleeder valves to help rid the system of air.  I opened the valve on the rear (bedroom) heat exchanger but that did not help.  Butch decided to call ITR for technical support.  He talked through the details of the installation but they did not have any definitive advice.

All indications were pointing towards some sort of blockage internal to the Combi and Butch thought it might be ice.  Kevin, in Washington passed Butch to Marcello at the factory in Canada, but still no luck.  We decided to turn on the electric heating element and set up a small electric space heater to warm up the bay and the unit while we went to dinner.  We drove to The Old Mill west of town on SR-16 where I ordered a mushroom, onion, jalapeño pizza, light sauce, no cheese, and extra thin crust.  It turned out quite well.  When we got back to the house we gave the Combi another try and it looked like it was going to work, but then didn’t.  At that point we called it quits for the night.  Linda called around 9 PM and we chatted briefly, catching up on the events of the day.  Grand-daughter Madeline finally called her “grandma” for the first time, so she was very excited about that, and it was good note on which to end another long, productive day.

2014/11/15 (S) Houston, We Have Ignition

I was up a little before 8 AM, had some more of the stolen I bought at Aldi’s for breakfast, and made about five cups of Teeko’s Seattle Blend coffee.  Butch and I then got back to work on the Oasis Combi hydronic heating system.

Butch was up earlier than me and drove into Logansport before I got up.  When he got back his first task was to remove the supply and return lines (heater hoses) so he could install shutoff valves.  It turned out that he had the wrong parts and had to go back to Logansport so I rode in with him.  When we got back we finally got to work.  It was chilly but we had another mostly sunny day on tap with light-to-no wind, so working outside was not unpleasant.

Fresh water pump on isolated plywood panel behind Oasis Combi.

Fresh water pump on isolated plywood panel behind Oasis Combi.

Butch got the valves installed and the lines reattached.  He then plumbed in the two fuel lines (supply and return).  Before he turned the unit on I pointed out what I had discovered in the manual last night; that the position of the “summer/winter” loop 3-way valve was the opposite of what we thought it was.  With the valve in the “winter” position, which would allow coolant to flow through the loop with the heat exchangers, he turned on the bypass switch on the Zone Control Board.  The circulation pump came on and the coolant level immediately started to drop in the filler neck, which meant the coolant was being moved into the loop and whatever had blocked this from happening yesterday had cleared up.  He turned the pump off so we could stage one gallon jugs of antifreeze/water mixture to finish filling the system.

Butch suspects there was an ice plug in the domestic hot water heat exchanger which is internal to the Combi box and the first place hot coolant goes before it leaves the unit and travels through the coach.  We also suspect that the use of the 1500 Watt electric heating element last night melted the ice plug.  At least that’s our best guess as to what the problem was.  The reason we thought this was the cause is that the factory apparently tests the units with water and it is probably impossible to get it all out using compressed air.  That is certainly the case with an Aqua-Hot.

Butch prepared six gallons of antifreeze/water mixture and staged them by the Combi.  With a funnel in the filler neck he turned the bypass switch on again and started adding the coolant mixture as the pump pushed it through the system.  Once the system seemed to be full I went into the house portion of the bus and barely opened the bleeder valve on the bedroom heat exchanger.  I got a three second puff of air and then coolant started to appear so I closed the valve.  I repeated this with the bleeder valve on the front heat exchanger with the same result.  These two valves are the highest points in the loop, so air tends to collect there.  The system essentially had no air in it at this point.

fan-coil heat exchanger

fan-coil heat exchanger

Butch hooked up the two fuel lines (supply and return), turned the power on to the unit, and then turned the burner on using the switch by the bedroom utility closet.  We could hear the pump trying to prime but the burner would not ignite.  The unit “flamed out” and Butch reset it several times to no avail so he turned the burner switch off.  We studied the situation and Butch realized that he had reversed the fuel lines.  He switched them and turned the unit back on.  It fully primed on the second try and ignited!  Finally, we had ignition.

Butch rigged up temporary power to the fans on the two heat exchangers and let them run.  The coach eventually got too warm to work and we had to turn the fans off.  We spent the rest of the day, with help from Fonda, completing other aspects of the system installation.  I removed an old mechanical thermostat from the warehouse and Fonda cleaned up an identical one.  We had a third one (different make) that did not need any work.

We pulled three two-conductor thermostat cables from the Combi across the bay and up through a hole in the floor of the bedroom utility closet and then to the three thermostat locations.  We used colored electrical tape to tag the ends of each cable as we pulled it so we could keep them straight later; yellow for the living area, blue for the bathroom, and red for the bedroom.  I mounted one of the thermostats in the kitchen by the front living area, the second one by the bedroom, and the third one in the bathroom.  I completed the connections in a somewhat unusual way.  The cable had a red wire and a white wire.  The white wire was left intact and provided a path from the thermostat to the Combi for DC negative (ground).  The red wire was cut in the utility closet and used to provide +12VDC to the thermostat.  The red wire in the cable from the closet to the Combi was not used.

The Combi came with pigtail harnesses that plug into keyed sockets on the Zone Control Board (box) and have butt splice connectors already installed on the loose ends of the wires.  I completed the thermostat wiring by connecting the wire for the front thermostat to Zone 1, the bathroom thermostat to Zone 2, and the bedroom thermostat to Zone 3.  Butch had connected a wire to the Zone 4 connector yesterday and planned to leave it and connect it to a switch in the bay for test purposes.

With the thermostats wired in Butch worked on the fan control relays while Fonda and I pulled a four-conductor thermostat cable from the Combi across the bay, up through the floor into the utility closet, and all the way up the center isle of the bus to the dashboard.  When then took the cable back into the bedroom and pulled it from the utility closet through the driver-side chase to the cabinet at the front end of the kitchen counter and then down through the cabinet to the very bottom and out the front facing grill to the front heat exchanger.  We left plenty of cable for hooking up the fan control relay that Butch had mounted on the fan-coil heat exchanger and left an extra coil of cable in the utility closet so I would have enough wire to make connections to the relays for the fans on the rear heat exchanger.

As with the thermostat wiring, I left the green and white wires intact all the way from the front heat exchanger to the Combi.  In the utility closet I removed the jacket from a six inch section and cut the red and blue wires.  The red wire coming up from the Combi was connected to the relay for the bedroom fan and the blue wire coming up from the Combi was connected to the relay for the bathroom fan, both of which draw air through a common radiator.  These colors matched the colors of electrical tape used to identify the corresponding thermostat cables.  I connected a separate white wire from the DC negative terminal on each relay to the DC negative (ground) bar on the 12 VDC distribution panel at the top of the utility closet.  The red and blue wires from the closet to the front heat exchanger were not used.

Adding coolant to the ITR Oasis Combi.

Adding coolant to the ITR Oasis Combi.

I mounted the relays to the outside wall of the closet; bedroom relay to the rear, bathroom relay to the front.  I do things like that when I work on projects like this.  By this time it was dark and Butch had gone inside not feeling completely well.  He was really stressed out yesterday when we were unable to fill the coolant loop and purge it of air and he did not get a good night’s sleep.  Been there, done that, didn’t even get the T-shirt.

It was going on 6 PM and I was done working for the day, the first day since I have been working here that I had finished up that early and the first day that I had not worked on any of my own bus projects.  But that was OK;  Butch and Fonda’s ability to use their bus conversion during the winter with comfort and convenience was directly related to the successful completion of the Oasis Combi installation and it felt good to have it so close to bring done.  I will finish up the little bit that remains to do tomorrow and then install another 120 VAC circuit from the inverter circuit breaker panel to outlets for the bedroom.

I need to mention that Butch has been very pleased with the treatment and communication from International Thermal Research, the manufacturer of the Oasis product line.  He was on the phone with their U.S. sales office yesterday when we ran into difficulty and they transferred him to someone at the factory in British Columbia.  The factory contact sent Butch an e-mail, which gave him an address to reply to, and his personal cell phone number.

Sometime in the late afternoon Bill Tharpe showed up to continue working on Brittiny’s car.  It needs a new intake manifold gasket, which requires the disassembly of the top half of the engine.  Bill really knows his way around cars having worked with Indy and Formula (One?) race car teams over the years.  Around 7 PM we headed into Logansport to have dinner at Pizza Hut.  I had the salad bar and some decent (smooth, mild) decaffeinated coffee.  When we got back to their house Bill got back to work on the engine and I retired to my room for the evening.  Butch and I talked earlier about possibly driving over to the Ft. Wayne Hamvention tomorrow but decided to stay here and continue working on bus projects.

2014/11/16 (N) Death of a Mouse

I was up around 8 AM and had my usual breakfast of homemade granola, some orange juice, and coffee (Teeko’s Seattle Blend).  I still had some of the stolen left, but having had that the last two mornings I felt the need to return to my normal routine.  Right after breakfast I replaced the GFCI outlet in the bathroom.  The old one had tripped a couple of times for no apparent reason and that was just one more thing I did not want to live with.  The old one was feeding two load circuits and had short pigtail wires wire-nutted to the hot and neutral conducts.  GFCI outlets are much bulkier than normal ones so that made for a very crowded box.  The new one had back connectors that allowed two wires to be inserted straight in under one screw and tightened.  That allowed me to do away with the two pigtails and the two wire nuts and make it a bit easier to get the outlet into the box.

By the time I finished installing the GFCI outlet Butch was ready for my assistance.  He finished connecting the fan relays on the front heat exchanger and I finished connecting the fan relays on the rear heat exchanger.   I then tied in the fan relay lines to the appropriate fan control lines coming out of the Oasis Combi Zone Control Board.  With the burner switch turned on I tested each zone by turning its thermostat up until it clicked, causing the burner to ignite, the circulation pump to start, and the fan(s) to come on.  All three zones worked.  Although not as dramatic or emotional as yesterday when got the unit to fill, purge, and ignite, this meant we were done with the Oasis Combi installation (except for some purely cosmetic things that Butch and Fonda may not get to for a while) and that it was fully functional.

Top of the Combi showing summer/winter valve lower right (blue handle).

Top of the Combi showing summer/winter valve lower right (blue handle).

While I was working on the Oasis Combi fan control wires Butch started working on installing a fuel gauge.  The New Jersey Transit MCI MC-9B coaches did not have fuel gauges as they made regular runs of known distances and returned to the same NJT garage every day.  For cross-country RV use, however, a fuel gauge is a very good thing to have.

To install the fuel gauge Butch had to pull the instrument cluster out of the dashboard.  These things are rarely designed/built for easy servicing, and this was no exception, but he got it out.  He had installed the sending unit in the fuel tank a long time ago but never hooked it up.  He managed to run a fishtape up from the driver-side front bay into the area behind the dashboard.  He attached a wire to it and fed the wire in as I pulled the fishtape out.  We then used the fishtape to feed the wire from the driver’s side of the generator bay to the passenger side.  From there the wire had to go through the chassis battery bay to get to the sending unit on the fuel tank.  After drilling a hole in one panel and drilling out two rivets holding an unused fuse holder to another panel we finally had a route for the wire.

There was a blank spot on the instrument cluster where the fuel gauge would have been so that is where Butch installed it.  It took us a while to decode the 24 VDC dashboard wiring diagram but we eventually figured out that there was an unused screw terminal on the load side of the Master Switch just below the fuel gauge that would very conveniently provide the +24 VDC for the gauge.  I made that connection and then Butch connected the instrument, remembering to pass the wires through the dashboard hole first.  In addition to the +24VDC, signal, and ground for the gauge he had to tap into the 24 VDC instrument lighting circuit to power the instrument light and provide a ground connection for that as well.  With everything hooked up Butch turned on the Master Switch and the fuel gauge indicated just below a full tank, which is what he expected.  These kinds of “little” projects sound relatively simply, but they always seem to take a half a day to a full day to do, even with two people working on them.

At this point it was about 2 PM so I took a quick lunch break and had a tofu hotdog with mustard, relish, and onions.  We had hints of snow flurries during the morning that became more persistent after noon.  I was thinking about installing the new Shurflo Everpure ADC water filter cartridge under the kitchen sink and opened the cabinet door to have a look at what was involved.  (Actually, I knew what was involved having done this before.)  This filter cartridge should be the easiest thing in the world to remove and install but that has not been my experience.  The location of the filter head doesn’t make it any easier.  Anyway, I turned on the light and noticed a waded up paper towel in the trash can.  I had not been using this trash can since I realized that the resident mouse had easy access to the area under the sink and regarded the waste basket as a buffet.  I figured I had thrown this used paper towel in there by mistake out of force of habit as I catch myself several times a day starting to do that.  I moved the can and reached in to get the paper towel and that’s when I noticed the dead field mouse in the corner of the trash can.

The mouse was a tiny creature, gray on top and white on the bottom.  I surmised that it had returned to this cabinet looking for the food it had found there on previous occasions, climbed up a carpeted wall or electrical cable, perhaps walked across a drain pipe and, seeing the paper towel moved to the rim of the trash can (the only place I ever actually saw it alive) and either jumped or fell in.  Unfortunately (for the mouse) the trash can did not have a plastic liner bag and so it had no way to escape.  I presume it died of thirst and/or lack of food.  It was not my intention to use the trash can as a trap.  In fact, I had purchased a live trap a few days ago but not yet set it.  My plan was to trap it, unharmed, and release it a couple of miles away near a creek so it had access to water.  Instead, I added it to my real trash bag, tied up the bag, and put it in the dumpster.  Although I was glad to no longer have it roaming around inside the coach, I was saddened to find it dead and to think that it had died this way.  I have no way of knowing, of course, if this was the only mouse in the coach so I will continue to be on the lookout for telltale signs of the presence of mice.

I returned to working on Butch and Fonda’s bus.  While they dressed up some coolant lines and tightened up some fittings on the Oasis I installed four surface mount duplex electrical outlets in the bedroom, two on the back wall above a narrow shelf at the head of the bed, one in the driver side chase at the midpoint, and one at the front end of the chase inside the utility closet.  I turned off the power to the inverter panel, removed the cover, and routed the cable down into the box.  Butch discovered that he did not have any more 20A circuit breakers so I connected the ground and neutral and left the load wire until we had an appropriate breaker.  We were done working in/on their bus for the night, so I left the cover off of the inverter panel and turned the power back on so they would have lights in the front part of the bus

Fused DC distribution house panel in MC-9 bedroom utility closet.

Fused DC distribution house panel in MC-9 bedroom utility closet.

Throughout the day Butch had been adding to a list of things he needed and at this point the list was long enough, or the items critical enough, that we made a run to town.  By this time it had been snowing for a few hours and it was accumulating on grassy areas and making the roads slick.  Unfortunately the Logansport Home Depot closed at 7 PM on Sunday evenings and we got there at 7:05 PM, having stopped first to fuel up the Suburban.  No problem, we just drove down the street to Rural King which was open until 9 PM and has free popcorn.  Bonus!  Butch found most of what he needed there.  My shopping list was short and easily filled at Walmart where Butch picked up a few other things on his list.

When we got back I made a tofu “turkey” sandwich with vegan mayonnaise, sliced onions, and power greens and got out some of the seedless black grapes.  As I was finishing the preparations Fonda came to the bus to let me know that Linda was on the phone.  I brought everything into the house and chatted with her for a little while.  We then sat down and ate dinner.  After dinner I used Butch’s chop saw to cut my oak center pillar mounting board to length and then set it up on a table in the parts room so I could stain it.  Fonda got the stain, a shallow wide mouth can, a disposable foam brush, a rag, and a pair of disposable gloves for me to use.  I was not very happy with the results, but I will see how it looks in the morning.  I suspect I will end up painting it flat black.  I would really like to get it mounted to the center windshield pillar before I wrap up working on my bus this Wednesday but, given the other things I need to do, it’s going to be close. 

 

2014/10/01-07 Bus Work Plus

Leave a reply

This post covers October 1 – 7, 2014

2014/10/01 (W) Aqua-Hot (Plus)

I woke up this morning sometime between 7:00 and 7:30 AM and worked for a while in the bedroom.  By 8:30 AM I heard voices, which meant Butch and Fonda were up and dressed, so I emerged from the guest bedroom to see what the plans were for the day.  I knew they would involve trying to fix our Aqua-Hot diesel-fired hydronic heating system, but I was not sure exactly how that work would proceed.

The first task, however, was to have breakfast.  Granola with fresh blueberries, red raspberries, and blackberries, plus orange/grapefruit juice and coffee.  Ahhh, coffee.  I did not get any yesterday, so I enjoyed having some this morning.

Butch & Fonda's Aqua-Hot in a bay of their MC-9.

Butch & Fonda’s Aqua-Hot in a bay of their MC-9.

Sometime between 9:30 and 10:00 AM Butch and I got to work on the Aqua-Hot situation.  We tried firing up my unit multiple times but it would not ignite and we had no evidence of fuel getting to the nozzle.  Butch added water to his unit and fired it up just to verify that it worked.  We unplugged the controllers from both units and connected my controller to his unit to see if the controller was the problem.  It wasn’t; his unit ran fine with either controller.  We put his controller on my unit, just to check, but the unit still would not ignite.

We decided that the most expedient course of action was to simply install his burner in my unit.  That was the point at which we realized that our units are not identical.  Ours is an AHU-103-000, originally made in the late 1980’s and early 990’s while theirs is an AHE-100-02s (?? check this).  The differences are minor but important, namely:

  • the fuel connections into and out of the burner are not the same so our fuel lines would not connect directly to their burner.
  • their burner had two fuel lines that ran down to bulkhead connectors while our unit did not use bulkhead connectors.

I had agreed to buy their entire Aqua-Hot to use for spare parts, so we started by removing the burner from our unit and setting it aside.  My plan is to repair it eventually or disassemble it for parts.  The problem is that I suspect the fuel pump and/or fuel valve and/or fuel valve solenoid are defective so I would have to determine whether that is the case.

Removing our burner was a bit more complicated that we thought it would be.  Besides the fuel lines, which had to disconnected and plugged, we had to disconnect a wiring harness that had four wires running into the main boiler box for the temperature control thermostat and over-temperature safety thermostat.  These wires were terminated in female spade connectors pushed on to the male spade lugs on the thermostats.  Rather than try to feed them through the small hole in the case I made a diagram of which color wire went where and then cut the connectors off allowing the wires to pull out easily.  We had to repeat this procedure on Butch’s burner.  Quite a bit of diesel fuel leaked out of various fuel lines and I kept soaking it up with paper towels.  With our burner out of the way we evaluated the situation and decided to take care of two other issues before proceeding with the Aqua-Hot.  That’s how it goes with bus projects.

The first issue was the check valve on the Parker FPM-50 Fuel Polishing Module installation, which had been leaking at the gasket between the two halves of the body since I had redone the fittings and reinstalled it.  I had a new (unused) check valve that I should have installed when I redid the fittings, but I didn’t.  The fuel line on the inflow side of the check valve was already loose so we disconnected the other end.  That allowed us to work in the shop with a vice to help hold parts.  We removed the fittings from the old check valve, cleaned them up, and assembled them to the new check valve using pipe thread compound rather than Teflon tape.  We then reassembled the new check valve assembly back into the FPM-50 system.  We turned the FPM-50 on and did not have any leaks; finally.

The second issue was related to the fresh (potable) water plumbing.  When we purchased the coach five years ago the fresh water system had two 12VDC water pumps plumbed in parallel with independent shutoff valves for the input and output sides of the pumps.  The system also had a surge tank.  Last spring (or fall?) I had replaced these two pumps with a single Shur-Flo 4048 model, removed the surge tank (which was not needed or recommended for the 4048), and used flexible hoses and various adapters to get the new pump connected in to the existing plumbing, including plugs to seal unused fittings.  That left a lot of plumbing in this part of the bay (just off the end of the Aqua-Hot) that did not perform any useful function and was in the way of other things, like the FPM-50.

All of the original plumbing in the coach is Quest, which is no longer made.  After studying the system for a while Butch realized that that Quest tubing at the valve on the end of the outlet hose had to be connected by being slipped over a barbed fitting and tightened with a swaged band.  If we could cut the band and get the fitting out of the tubing we could cut a different section of tubing, allowing us to remove all of the unnecessary plumbing, reinsert the barbed fitting into the cut line, and put a clamp on it to seal it.  Butch had a special tool for clamping bands on PEX tubing and it appeared that the bands were a compatible size for the Quest tubing.  He also had his tubing cutter handy, so we removed the band (which was copper and easily cut), and proceeded as just described.  The PEX band swaged down nicely and passed the “Go /No-Go” test (a special tool that gages the clamped band to ensure it is tight enough without being too tight).

We turned the water pump on and had a leak at the plastic double-ended male nipple between the end of the hose and the Quest fitting.  With the pump off Butch removed the hose and then the nipple.  It was cross-threaded but the threads were OK.  Both the hose and the fitting are sealed by rubber gaskets anyway, not by the threads, so I reassembled the three pieces snug but not over tight.  I turned the water pump on (up in the house portion of the coach) with Butch watching for leaks and we did not have any.  It was shaping up to be a very good day.

With those two issues resolved, and lots more room to work on my Aqua-Hot, we removed the bulkhead fittings from Butch’s unit and cleaned them up with a wire brush wheel in his shop.  Butch reassembled some of the parts in the shop with pipe thread compound and I installed them in two unused bulkhead holes in our unit.  I then threaded in the two final fittings on the outside of the unit and had Butch do the final tightening.  He is stronger than I am, and very experienced at working with this sort of technology, so he has a good feel for how tight things need to be and can make them to correct tightness.

It was finally time to install their burner in our unit.  I stripped the ends of the wires that go into the burner box, set the burner roughly in place, taped the wires to a piece of plastic banding, and fished the wire harness up into the boiler box.  Butch installed the new female spade connectors onto the wires while I was doing something else, but I do not recall what it was.  I installed the connectors onto the mating pieces on the temperature limit switches.  (Because of the way my Aqua-Hot is installed I have to work bent over at the waist.  This is very hard on Butch’s back, and by the end of the day my back was a bit sore and stiff as well.)

The burner assembly is held against the combustion chamber by two captive bolts that swing into position.  The bolts have flanged nuts on them that tighten down and hold the burner snug to the boiler.  Because our unit is installed “sideways” it is very difficult to see and reach the nut on the lower back side of the burner.  The nuts are 10mm (Webasto is a German company) and a ratchet with a 10″ extension is needed to reach them.  I found the best way to attach the burner was to hold it in position with my left hand, get the upper/outside bolt in position with my right hand, and then run the nut down with my right hand, but not too tight.  I continued to support the burner with my left hand while I reached over the top to find the other bolt by feel, flip it into position, and tighten the nut enough to keep it from slipping off.

I knew I had to be very careful with these bolts as over tightening them can crack the mounting flange on the combustion chamber; a big mistake.  I held the burner with my left hand and made sure it was fully and properly aligned with the combustion chamber flange and then alternately snugged the two nuts down.  The specifications on these nuts is for “20 to 40 inch-pounds.”  That is not a lot of torque.  Butch had a really good digital readout torque wrench, but it only went down to 60 in-lbs, so I had to guess.

With burner re-installed, Butch attached the two burner fuel lines to the appropriate bulkhead fittings.  These are flare connectors so they did not use pipe thread compound.  I then attached the supply and return fuel lines to the appropriate fittings on the outside of the bulkhead connectors.  These were barbed fittings that the rubber fuel lines slipped over and were secured with band clamps.

We turned the unit on (in the coach) but it did not fire.  One concern, which I will remedy tomorrow, was that the level of fuel in the tank might be close to the lower end of the pickup tube for the Aqua-Hot.  These tubes are usually installed so that accessory devices, like heaters and generators, cannot use the last 1/4 tank of fuel, ensuring that there is fuel available to start the main engine and travel a reasonable distance (to get more fuel).  It took three tries to get it to ignite and when it did it produced a lot of white smoke, which is unburned fuel.

While the unit was running Butch checked the exhaust leak and said it appeared to be under the coach, not up at the Aqua-Hot itself.  That was a lucky break and big relief.  The beginning of the exhaust pipe slips over a pipe thread nipple that is threaded into an elbow and is secured with an exhaust pipe clamp.  Butch saw telltale streaks of black soot indicating that exhaust gases were leaking out at this point.  We shut the unit off and let it cool down enough that I could remove the pipe clamp securing the exhaust pipe to the nipple.  Both bolts were very rusty, and did not come off easily, but I got them off.  Butch had one clamp of the correct size on-hand so I installed it.  I will get a second clamp tomorrow when we go to town, plus a replacement if a Butch wants one.

We turned the unit back on and again it did not want to ignite.  Butch though it was a fuel delivery problem, such as a loss of prime, or perhaps air was getting into the line.  After a couple of attempts I turned the Parker FPM-50 on and let it run for a while, thinking that it might re-prime the line.  I turned it off after 10 minutes and turned the Aqua-Hot on.  It went through a long pre-combustion purge stage and then finally ignited.  It produced copious amounts of white smoke initially, but after 10 minutes there were no visible exhaust fumes.  Butch is suspicious of the FPM-50, either the unit itself or the installation, but I have run the Aqua-Hot successfully many times subsequent to its installation until it failed to fire this summer.  Clearly the situation requires further investigation which will happen tomorrow or Friday, depending on the weather.

The unit heated up fully and shut off automatically after which I turned it off.  I then mounted my burner onto Butch’s combustion chamber, both to protect it and to make sure some small animal did not take up residence in the combustion chamber.  The only thing left to do on our Aqua-Hot was to mount the new Oasis expansion reservoir.  We determined that we could mount it to the side of the unit with short sheet metal screws.  I held it in place and marked the hole locations, center-punched them, and drilled the out using a bit that Butch gave me.  The housing is stainless steel and was difficult to drill even though it was thin.  I had 1/2″ screws and Butch found some washers.  It took some fiddling, but I finally got it attached through all eight holes.  We will switch the overflow tube from the undersized reservoir that came with the coach to the much larger Oasis reservoir tomorrow after the unit has cooled down overnight and drawn most (all) of the coolant back into the boiler.  I put the cover back on the burner end, we put our tools away, and called it a day.  And a good day it was.

Butch’s brother, Tom, and his wife, Tracey, came over during the late afternoon.  It was 7 PM by the time we were done working, so we got cleaned up (sort of) and drove down to the Old Mill Restaurant just west of town on SR-16.  I had a small pizza, no cheese, with onions and mushrooms.  They made the crust thinner than their usual and it baked up very nicely.  Once we got back to the house I worked on this post while Butch dealt with e-mail and Fonda worked on the wedding dress she is making for their daughter Jean, who is getting married just before Thanksgiving.  After we turned in for the night I off-loaded all of the photos I took of our day’s work and then went to sleep.

Our Aqua-Hot in a bay of our Prevost H3-40.

Our Aqua-Hot in a bay of our Prevost H3-40.

2014/10/02 (R) Aqua-Hot (Or Not)

I was up at 7:30 AM and fixed breakfast in the coach at 8; granola with fresh blueberries, red raspberries, blackberries, and almond milk.  A glass of orange/grapefruit juice, but no coffee.

Butch and I left at 9 AM to run errands in Logansport.  He stopped at a filling station that sold kerosene and bought four gallons.  I will explain why later.  I got a big cup of coffee there and it was a decent brew.  Our next stop was NAPA Auto Parts where I bought a 1.75 inch exhaust pipe (muffler) clamp and Butch picked up some things he had ordered.  Next stop; Rural King.  We do not have this chain anywhere near where we live.  It’s a kind of hardware, sporting, and home goods store that carries an interesting assortment of items that might be of use to farmers.  It’s not a fancy store, but it carries a lot of stuff and is well organized.  Butch needed some carpet tacks and I bought a fruit fly trap and an insect fogger.  Rural King also has free popcorn.  (Now you know the real reason we stop there.)  I got some on the way in and on the way out.  🙂  Our last stop was at Aldi’s where Butch picked up some things they needed for their dinner tonight.

When we got back to Twelve Mile I changed clothes and got to work.  The weather forecast was for rain and warm temperatures.  Rain had already wet the pavement around the buses so Butch gave me a large sheet of corrugated plastic to lie on while I installed the muffler clamp on the Aqua-Hot exhaust pipe.  I installed it next to the one I put on yesterday but pointing in the opposite direction.  These clamps are just “U” bolts with a matching saddle that completes the other half of a circle when slipped over the U-bolt and tightened with the nuts.

The Aqua-Hot had cooled off overnight and suctioned all of the coolant in the expansion reservoir back into the boiler.  That allowed me to disconnect the overflow tube from the bottom of the reservoir with a minimum of mess and attach it to the main fitting on the new Oasis tank.  I added a 50/50 mix of water and ethylene glycol antifreeze to the tank until the level was halfway between “minimum cold” and “maximum cold.”  This should have been the final Aqua-Hot task, but it would not ignite when turned on even though it worked yesterday after the burner swap.

I removed the service cover and Butch and I started to puzzle out what the problem might be.  When I turned the switch on at the dashboard the blower came on immediately but the fuel valve apparently did not open.  We don’t know if the spark igniter was working, but the burner never lit and eventually the blower shut off.  When that happens, the controller “locks out” the unit from even attempting to turn on again and I have to turn the switch off to clear the lockout and then turn it back on.

Butch had me disconnect the supply and return fuel lines on the outside of the bulkhead and replace them with clear fuel lines about 5 feet long so they would reach into the bottom of the kerosene container.  (Remember the kerosene Butch bought earlier?  Now you know what it was for.  He will eventually use it to fuel a heater.)  He thought we might have an air leak in the fuel lines/connections and the clear fuel lines would allow us to see the air bubbles.  By drawing kerosene out of the container, pumping it through the unit, and returning it to the container we could recirculate it indefinitely as long as none of it was being burned.  Even with combustion taking place most of the fuel gets returned as the unit only burns fuel at the rate of 1/4 gallon per hour.

With the kerosene setup we had taken the coach’s diesel fuel lines, including the Parker Fuel Polishing Module, completely out of the system.  Butch suspected the FPM-50 might be the culprit and thus did not except to see air bubbles, but we did; a lot of them.  And the unit still wasn’t firing.  We were perplexed and a bit frustrated.  On the other hand, it appeared that the FPM-50 was no the culprit, or at least not the only culprit.

Since his burner had always worked well in his unit we figured the problem had to be something in my unit.  Butch got the service manual for his unit, which is almost identical to mine, and we started looking at wiring diagrams.  The units have four thermostats; two for the diesel burner and two for the 120VAC electric heating element.   We thought those might be the problem and checked the two for the burner but they were OK and appeared to be functioning correctly.  There are also six fuses.  I pulled and checked each one and they were also OK.  When Butch works on his unit he often starts it by connecting a jumper wire across the two terminals for the switch wires to save himself the trip to the bus (where the switch is located) and back to the bay (where the unit is located).  He connected a jumper wire across the switch terminals on my unit and it fired up after the normal 25 second purge cycle.  It was good that it started, but not good that we did not know why.

We were still seeing a lot of air in the kerosene and Butch decided to remove the secondary fuel filter from its holder and change its orientation so the output was lower than the input, ensuring the outlet was covered by fuel.  The air bubbles lessened considerably when he did this but did not clear up completely and the unit was producing a lot of white smoke (unburned fuel).  It always produces some on startup until the combustion chamber heats up, so we decided to let it run.  The exhaust fumes eventually cleared up and the coolant eventually expanded to within 1.5 inches of the top of the (new) overflow reservoir when the unit reached maximum operating temperature, automatically shut off the burner, and completed the purge cycle.

We wanted to cool it down so we could test it again so I removed the jumper wire to keep it from restarting.  I then opened all of the coach windows, opened all three ceiling vents, turned the ceiling exhaust fans on high, turned the three Aqua-Hot house thermostats on, and turned them up to their highest temperature settings.  I also turned on the engine pre-heat coolant circulating pump.  As the unit cooled down it started drawing the coolant from the reservoir back into the unit.  We turned the unit on using the switch at the dashboard and it fired up.  At this point we had not found anything wrong and had not fixed anything, but it seemed to once again be working correctly.  While the unit was heating up and cooling down Butch repaired a flat tire on a semi-trailer that they used to store parts for their business.

I still had the fan coil heat exchangers and the engine pre-heat running to cool the unit down.  The power for these units, and for the coolant circulation pumps, is independent of the diesel burner as the Aqua-Hot can also be heated by an electric element and by the main engine.  When the unit had cooled sufficiently I removed the temporary fuel supply line and reattached the supply line from the diesel fuel system.  I left the clear fuel return line connected at the bulkhead.  I removed the heavy rubber fuel line from the bottom of the FPM-50 check valve, cut the clear line to a workable length, and attached it to the bottom of the check valve.  By leaving the section of clear line in place we would still be able to monitor for air bubbles.

After cleaning up diesel fuel that had leaked out of hoses and fittings I turned the burner on using the front switch.  The unit immediately came to life and the burner ignited the way it is supposed to.  We still had some air bubbles in the return line, but no worse than before until I moved the secondary fuel filter back into its normal horizontal position.  That created a lot of air bubbles so I moved it back so the outlet was lower than the inlet.  I am suspicious of this filter and/or the lines attached to it.  The unit was working and there was no point in bringing it up to full temperature so I shut it off and installed the service cowling.  It will be interesting to see if it ignites tomorrow morning when it is cold.

Butch and Fonda worked on uninstalling their Aqua-Hot while I unloaded most of the parts, supplies, and tools from my car and put them on a cart in their now mostly empty warehouse.  As I was finishing it started to rain lightly.  We quickly gathered up our tools, stowed our tool boxes, closed up our bus bays, and moved everything else into the garage.  I shut off the ceiling exhaust fans, closed the vents, and then closed all of the coach windows.  I shut off the three house thermostats and the engine pre-heat pump and then moved my car back to its usual parking spot.  By that point it was raining harder.

Today was Fonda’s birthday but they did not have any special meal plans.  Around 4:15 PM I decided to go fill the fuel tank on the coach.  Gallahan’s Truck Stop is only 10 miles from their house and an easy run there and back on SR-16 and US-31.  I arrived on Tuesday with only 3/8ths of a tank and I wanted to eliminate the main tank fuel level as a potential source of the no-fire problem.  I was going to need fuel anyway for the trip to Elkhart and back next week and any subsequent movement of the bus.  I texted Linda from the truck stop to let her know it was Fonda’s birthday and suggested that she call their house later.

Butch and Fonda had leftovers while I was out so I dined alone in the coach.  I had a large green salad, some pretzels with hummus, and a tofu hot dog.  Apple cider and reheated apple/pear crisp topped off the meal.  Yum.  I brought my dishes and cutlery in the house and washed them.

Linda called while I was eating so I did not get to talk to her.  Butch was very tired and turned in early so I chatted with Fonda for a while about their various family members, many of whom I have met over the years, and what they were up to before retiring to my room to check e-mail and work on this post.  Although not as productive as yesterday it was still a long and tiring one.  Actually the days when you don’t feel like you have accomplished anything definitive are the hardest.

2014/10/03 (F) The Other Bus

I got up at 7:30 AM, got dressed to work, and then spent a half hour doing some preliminary packing.  I had breakfast in the coach (granola with fresh berries) and was enjoying my first cup of coffee while cleaning up a few dishes when Butch knocked on the door.  He was curious if I had tried starting my Aqua-Hot.  I had not, so I turned on the switch for the diesel burner.  The blower came on right away and then the burner ignited after a short purge cycle of perhaps 15 seconds.  The combustion was clean on startup with no visible exhaust smoke.  I checked the expansion reservoir and the coolant level had dropped overnight to the “minimum cold” reference mark.  The unit was running well and I left it on to complete a full heating cycle.

When I arrived in Twelve Mile on Tuesday I noticed some small flies in the kitchen as I was setting up the interior.  We had not used the coach since mid-June and had left a couple of windows slightly open to keep it aired out and prevent it from getting too hot.  We did not turn the refrigerator off, which adds heat to the interior.  The windows have screens, but the little bugs could have gained access through any number of places.  I set up the fruit fly trap I bought yesterday to try and rid the coach of the little bugs.

I also bought a fogger yesterday that I had planned to use today just before leaving for home, but the directions said to only leave the fog for two hours and then ventilate the space.  There were also cautions about removing/protecting food and cooking/eating utensils and eliminating ignition sources, including the refrigerator.  The refrigerator (and freezer) are full of food so that was more trouble than I was prepared for today.  I put dryer sheets in the cabinets under both sinks (kitchen and bathroom) and in the bay by the Aqua-Hot.  We found several acorns inside the Aqua-Hot when I removed the service cowling on Wednesday and I have read that animals do not like these dryer sheets.  The sheets cannot do any harm so there was no down side to trying this.

Our major focus today was two interior projects in Butch and Fonda’s bus, a 1987 MCI MC-9 Crusader II NJT (New Jersey Transit).  Like most owner-converted buses, it started life as a seated coach in revenue service and got a lot of use over the years before being sold for a small fraction of its original cost.  In the case of their coach the New Jersey Transit Authority ordered a large number of these MC-9 model coaches with special modifications for use as commuter buses, as opposed to a city bus or a tour bus.  The MC-9 proved to be a reliable coach and used ones make an excellent but economical platform for a DIY conversion project.

They needed help installing a piece of “FRP” (Fiberglass Reinforced Plastic) on a section of wall.  They have used this material, in white and almond, for wall paneling and as a ceiling headliner.  The material comes in 4’x8′ panels and is flexible but durable.  It brightens the interior, as it reflects light, and is very easy to clean.  The piece had to be fitted, marked, and trimmed several times.  This project occupied Fonda for much of the day, Butch for some of the day, and me for a small part of the day.

Butch & Fonda's MC-9 conversion in the process of being wired.

Butch & Fonda’s MC-9 conversion in the process of being wired.

The other project was electrical wiring for switched kitchen outlets and the ceiling lights in the kitchen and living room.  I spent most of the day working on this.  Butch had finally decided that I know enough about electrical work that I can be entrusted with these tasks.  He is using Wiremold surface mount boxes and wire channels, which makes a lot of sense in a bus conversion where you cannot necessarily run wires through the walls of the bus.

Butch had previously installed Wiremold 2-gang base plates for electrical boxes to hold switches and outlets.  We routed electrical cable (10, 12, and 14 AWG wire, both NM cable and separate conductors) between base plates and the AC power distribution boxes.  I wired up outlets and switches and tied in lines and loads.

Larry “the scrap metal guy” showed up about noon so Butch had to use the forklift to load a pallet of old Crosley radiator cores into Larry’s truck.  After Larry left Butch used the forklift to remove their Aqua-Hot from their bus.  Fonda and I helped get it off the forklift into the back of my Honda Element after which we returned to our electrical and paneling work.

I quit working around 2:15 PM, changed out of my work clothes into something cleaner and more comfortable for driving, and washed up.  I finished packing and then loaded the car for the trip home.  I had planned to leave at 3:00 PM and pulled out of their parking area at 2:59 PM.  I did not have lunch and would not be having dinner until 8 PM, so 30 miles up the road I stopped at a BP/McDonald’s, topped off the fuel tank, and had some French fries.  The stop added 30 minutes to my ETA but it took the edge off of my hunger which made for a more comfortable drive.

On the drive home I suddenly had the vague feeling that I had not turned off the 12VDC fresh water pump in the bus.  I called Butch and had him check it.  As I suspected, it was on so he switched it off.  The only reason this was a concern was that a leak downstream of the pump would result in the (full) fresh water tank eventually being pumped dry (lots of water flowing somewhere) and the pump then continuing to run until it burned out or burned up (fire?).

A little farther down the road it occurred to me that leaving the Aqua-Hot turned on tomorrow, while Butch and Fonda were gone for most of the day, was probably also not the best idea I’ve had recently.  I stopped at the Travel America on M-60 at I-69 and called Butch again to ask him to turn the Aqua-Hot off in the morning right before they left.

On the drive home fall was definitely in the air and perhaps even an early touch of winter.  I drove through heavy, blinding rain with strong cross winds just northeast of Elkhart, Indiana and was in and out of rainy/windy conditions for most of the drive in Michigan.  I called Linda as I passed Charlotte, Michigan which was less than an hour from the house.  I got home at 8:10 PM and she had dinner waiting which was nice.  We had a green salad and an Amy’s Roasted Vegetable pizza.  After dinner I unloaded everything from the car except the few tools I had brought back with me, and the defective Aqua-Hot.  We were both tired after long days and turned in early.

2014/10/04 (S) Chores

It continued to rain overnight and into this morning and we awoke to temperatures in the upper 30’s (F).  We went to our ham radio club breakfast and lingered until 10:15; longer than usual.  When we left we headed to Country Squire in downtown Howell to pick up the hose and cover for the Broil King outdoor grill.  We stopped at the bank and then at Teeko’s for three pounds of fresh roasted coffee beans.  Our last stop was Meijer’s, just across the street from Teeko’s, to stock up on non-perishable food for me for the next week.  While we were there I got a phone call from Chuck and agreed to meet him at his bus garage at 1 PM.  By this time it was already 11:30 AM.  We unloaded groceries at home and had a quick lunch of hummus, chips, and grapes. I left at 12:30 PM and Linda settled in for the afternoon to work on her bakery project.

Chuck had re-installed his repaired tachometer and installed his new VDO speedometer and I wanted to see how the speedometer/odometer was wired and get the model number.  It was a VDO-437-152 85mm 85/130 (MPH/KPH).  Chuck had also purchased a dual multistage battery maintenance charger and we had a long chat about where to install it and how to wire it in.  While I was there Linda sent a text message asking me to pick up rolled oats so she could make another batch of granola.

I stopped at the Meijer’s in Wixom, topped off my fuel tank, and bought three bags of Bob’s Red Mill Thick Rolled Oats and two bottles of wine.  Back home I started doing the laundry and working on my computer off-loading photos from my camera.  Linda wrapped up her work and took a break to read before starting dinner.  I backed the car up to the garage and we unloaded the spare Aqua-Hot onto a wheeled platform.  The unit was very heavy, but we got it out and down safely.

For dinner, Linda made a nice green salad, cooked up a really yummy squash we had not tried before, and made seitan stroganoff served over basmati rice.  After dinner she read and played online word games with her friends and relatives while I edited blog posts at my computer.  I brought the laundry up and Linda helped get my clothes packed for tomorrow.  Butch called to let me know that they were back from their family reunion and the Aqua-hot started right up when he turned it on.  Cool (hot).

2014/10/05 (N) Indiana Bound

Linda helped me get partially packed yesterday and I stayed up later last night than I should have, so I slept in a little bit this morning, but the smell of coffee brewing and breakfast cooking got me out of bed.  Linda made a tofu scramble with onions, mushrooms, and green peppers and served it with toast and coffee.  That was a nice way to start the day.

After breakfast I checked e-mail and then started gathering up the remaining items I needed to take with me to Indiana.  I had more clothes than the last trip since I would be gone seven nights rather than three and I would be involved in working on buses initially and then attending a rally.  This time of year the clothing needed to work outdoors can also vary considerably from day to day and even during the course of a day.

By 11:30 AM I was ready to load everything into the car.  Bags of food went on the floor in front of the passenger seat, my computer and carry bag went on the passenger seat, and the suitcases and bag of shoes and coats went behind the front seats.  I then backed the car up to the garage and loaded the items we hoped to get rid of at the FMCA Great Lakes Converted Coaches (GLCC) Surplus and Salvage Rally later in the week.

With the car packed, Linda reheated the seitan stroganoff from last night for lunch.  Even left over it was delicious.  By the time we finished eating and cleaning up it was 1:15 PM.  There wasn’t anything left to do at home, and Linda was waiting for me to leave before she got to work on the bakery software conversion project, so a farewell-until-later kiss sent me on my way.  I pulled out of the driveway at 1:24 PM.

The weather looked and felt more like early winter than early fall with moderately strong coldish winds moving an endless layer of mottled gray clouds from west to east.  It was neither gloomy nor foreboding but had that wintery edge to it.  I thought about alternate routes out of town but decided to take Hacker Road to M-59 the same way I do in the bus.  Most of my route was the usual; M-59 west to I-96 west to I-69 south to M-60 where I stopped at a McDonalds to rest and get a cup of coffee.  I then took M-60 west through Three Rivers to M-40 where I made a rest stop and topped off the gas tank at the Shell station.  Regular was $3.19, a price I have not seen in quite some time.  I took M-40 south seven miles to US-12 and headed west to M-217 (the Michiana Parkway) which runs south into Indiana where it becomes CR-17.  Instead of continuing on to US-20, however, I took CR-4 west to Elkhart Campground.

I stopped at the campground to make a reservation for Wednesday through Sunday (for the rally) but found out that I did not need one.  I confirmed the availability of 50A electrical service while I was there, took the opportunity for a pit stop, texted a trip update to Linda, and then continued my trip to Twelve Mile, Indiana.  Since I was in Elkhart and had a good phone signal I called Michele Henry of Phoenix Paint to remind her that I would be in Elkhart later in the week and that we had talked about getting together to review and finalize an article I had written some time ago on the process of renovating the exterior of our coach.

I took SR-19 south through Elkhart to US-20 west to US-31 south. The conversation with Michele lasted about three quarters of the way to Twelve Mile where I finally reached an area with no Verizon cell phone service.  (I find it odd that there is any stretch of US-31 without Verizon service as it is the major connection between Indianapolis and South Bend.)  I exited at Rochester onto SR-25 south and took that as far as Fulton where I took a couple of small county (farm) roads down to SR-16 at a point slightly west of Twelve Mile and drove east into town.  The trip took almost five hours, including the two stops, and covered 245.7 miles.

I had a marginal cell phone signal so I sent a text message to Linda letting her know I had arrived and asked her to call my hosts’ phone around 7:30 PM.  I said “Hi” to Butch and Fonda and then excused myself while I unloaded the car.  I unpacked the suitcase and stored most of the clothing in the bus, taking enough items into the house for the next couple of days.  I also unpacked and stored all of the food in the bus pantry.  I put my technology, toiletries, shoes, and work jackets in the house and then went back to the coach to have a quick bite of dinner.

I made my final trip for the night from the coach to the house just before 7:30 PM but managed to be in the house when Linda called.  She chatted briefly with Butch about some business related forms and then chatted briefly with me.  She will be working at the bakery most of the week, but plans to drive to Elkhart on Friday morning to visit with GLCC chapter members, have dinner, and participate in the business meeting.  She’s the chapter Treasurer.  She will stay the night, and through breakfast and lunch on Saturday and then head back to the house.  We can only leave the cats alone for so long.

Butch was working at his computer but cleared a chair off for me.  He had his 2m ham rig dialed in to the Miami County Amateur Radio Club repeater and they started their weekly net at 8 PM.  We had a long chat before I retired for the evening around 9:45 PM.

The plan for tomorrow is to continue working on the kitchen and ceiling light wiring in their bus.  I also have a few more places to look for the diagrams and installation notes for the Zena 24 VDC engine-driven power generating system.  Butch has an appointment on Tuesday morning and will pick up some things while he is in town.  I need a fuel line coupler (double barbed male) so I can remove the fuel lines from the final/secondary fuel filter on my Aqua-Hot, connect them together, and see if that eliminates the air bubbles.  He also needs parts for the rigid links he is making for the leveling valves for the bus chassis air-suspension system.  He is going to get extra material and make a set for me too.  It should be an interesting and varied week.

2014/10/06 (M) No Fuel Flow

Getting our Aqua-Hot to work is proving to be quite a challenge.  When Butch and Fonda got home early Saturday evening Butch turned on the burner and it fired up perfectly within the normal startup cycle time limits.  He left it on and I assumed it was working correctly when I arrived yesterday.  It wasn’t until this morning that I realized I did not have hot water.  The switch was on but when I checked the expansion reservoir it was below the minimum cold level.  The unit had obviously cycled off and then failed to restart sometime later.  Once that happened the control circuitry locked out the fuel and ignition spark as a safety measure.  I tried cycling it four times but it would not ignite.

Butch found a small inline (secondary) fuel filter and I replaced the one in the unit.  It still would not start.  I disconnected the fuel line from the outlet of the Racor fuel filter (which feeds to Parker FPM-50), disconnected the fuel line from the outlet of the FPM-50 (which supplies the burner), and connected the supply line directly to the Racor filter.  It still would not start.  Based on what we could see in the transparent secondary fuel filter the unit was not getting fuel.  There are a limited number of things that could be wrong: no fuel; bad fuel; clogged/restricted fuel line(s); clogged/restricted fuel filters; weak/broken fuel pump; stuck fuel valve or defective fuel valve solenoid; clogged nozzle.  We started the generator, which may use the same main tank pickup tube as the Aqua-Hot, and it ran beautifully.  I turned the electric toe-kick heaters on to put some load on the genset and let it run for a while.

Our next step was to change the Racor fuel filter / water separator and/or by-pass it, but it started to rain.  The forecast was for rain throughout the morning turning to thunderstorms in the afternoon with temperatures in the upper 50’s.  I did not want to work in those conditions so I put away my tools, closed up the coach, and spent the rest of the day (except for a quick lunch break) working on the 120 VAC wiring in Butch and Fonda’s coach.  I hope we have power to their new switched kitchen outlets and ceiling mounted fluorescent lights by the end of the day tomorrow.

I had leftover Ghallaba for dinner.  It was delicious.

Butch ordered a VDO-437-152 electronic speedometer/odometer for me from PartDeal.com which is part of ISS Pro (Instrument Sales and Service) with overnight shipping.  He then called Joe and got the address of the place in Quartzite, Arizona where we are thinking about spending part of the winter.  He and I spent some time checking it out on Google Maps, Google Earth, and Google Street View before turning in for the night.  I spent some more time checking out Quartzite and distances to the nearest towns with decent shopping.  I dealt with several e-mails, worked on yesterday’s blog post, and finally turned out the lights.

2014/10/07 (T) Loose Connectors

I was up much too late last night and stayed in bed this morning until just after 8 AM to make sure I got my 7 hours of beauty rest.  I was up and dressed by 8:40 AM, just in time to converse briefly with Butch before he took off for a shopping run and an appointment in Logansport.  Our plan was to attack the Aqua-Hot fuel flow problem when he got back, weather permitting.

After Butch left for town I had my usual bowl of yummy homemade granola for breakfast.  Rather than make coffee, however, I went across the street to the Small Town Brew coffee & bake shop that Lisa Paul opened a little over two years ago.  Lisa wasn’t there, but her friend Ashley was covering for her.  Coffee is on a donation basis and the only small bill I had was a $1, so I got a large mug of coffee, with a refill, for a buck.  Ashley was engaged in a conversation with a local farmer when I arrived.  She was very friendly, and included me as much as she could, but they were discussing local issues (of course) which involved family relationships and property sales, none of which meant anything to me.

I found out that Ashley’s boyfriend, Jeff, is slowly trying to buy up the whole town of Twelve Mile and turn it into a rental community.  Ashley helps Jeff renovate each property to make it rentable.  What they are doing probably makes some economic sense but long-term will destroy any sense of community that may exist in this place.  Renters simply do not have the same stake in a community as owners.  The town is very small with very little employment but is only 12 miles from three much larger towns (Logansport, Peru, and Rochester) and only 30 miles from Plymouth (north) and Kokomo (south), so it is possible to live here and drive to employment elsewhere.

Although Twelve Mile has a bank and a post office it seems like the sort of place younger and middle aged folks might rent for a while rather than someplace to settle for the long term.  I am, of course, looking at this through the eyes of a lifelong urbanite.  Butch and Fonda have lived here for a very long time and it has certainly met their needs for a place to live and run their business, as well as build/store their bus conversions.

I finished my coffee and returned to our bus to see if I could remove the defective speedometer.  The dashboard cover just lifts off, providing access to everything on the back side.  Not good access, as the dashboard is fairly close to the windshield, but access nonetheless.  I can also see the back side of the dashboard clearly through the windshield, so a second person can help direct tools into position if needed.

The old speedometer is held in with a U-shaped bracket secured with two Nylok nuts on machine screws that are part of the case.  The machine screws protruded far enough beyond the nuts to require a deep socket or a socket with a large enough through hole to allow the screws to pass through.  In order to get the socket onto the nuts I had to hold wiring cables out of the way.  I traced the wires coming out the back of the speedometer and discovered that the instrument connector was disconnected from the mating piece in the wiring harness.  The connector for the instrument lights was also unplugged.  Whatever the condition of the instrument it was guaranteed not to work in this configuration.

I do not recall how this situation came to be.  I was working on the dashboard wiring this past March while we were in Williston and presumably cleaned these contacts as the intermittent speedometer was the primary thing we were trying to fix.  Presumably I either failed to plug these connectors back together or did not plug them together fully and they eventually worked loose.  Having the connectors touching loosely could certainly have caused the intermittent and erratic readings I was seeing.  I decided to leave the speedometer in the dash, reconnect it, and see what it did on the drive to Elkhart.  I will have to decide whether to install the new speedometer when it arrives or keep it as a spare.  Either way I will need to test drive the bus.  Whatever I decide I do not plan to return the new one since it is the correct replacement part (per Prevost) for a speedometer that may eventually fail if it hasn’t already.

While Butch was away I worked at my computer selecting and editing photos for a few of the late September blog entries that I have not yet posted.  I should have some free time at the upcoming FMCA GLCC Surplus and Salvage Rally to get the blog and website caught up and also get some writing/editing done on articles for Bus Conversion Magazine.

With regards to my Aqua-Hot, Butch’s plan was to install short fuel lines on the inlet and outlet sides of my Racor fuel filter / water separator, insert T-fittings, reconnect the normal fuel lines to the T-fittings, and attach vacuum gauges to the T-fittings.  This configuration would allow us to monitor the relative pressure in the fuel lines on either side of the Racor to see if there was a restriction.  I have a replacement filter cartridge for the Racor but we did not want to install it unnecessarily.  It would have been easier but provided us with less information.

Although there are several components inside the Aqua-Hot that could restrict or prevent fuel flow, all of those came from Butch’s unit and were known good components before we swapped them over.  We also had the unit in our coach operating as recently as this past Saturday.  At this point all indications are that the no-start problem is fuel supply related and external to the unit, i.e., in our coach.  Ugh.

My new VDO speedometer arrived while Butch was gone.  I could not find Fonda so I signed for it.  I was eating lunch when Butch got back.  He bought barbed brass couplings for 1/4″ fuel line and 11′ of fuel line.  He did not buy T-fittings because he had a quantity on hand.  Unfortunately we could not find them so I made a quick run to Logansport to get the missing pieces.

Pressure gauges and T-fittings for testing the Aqua-Hot fuel delivery.

Pressure gauges and T-fittings for testing the Aqua-Hot fuel delivery.

When I got back I hookup up the two vacuum gauges as previously described and initiated a start cycle on the Aqua-Hot.  We did not see an indication of a restriction but the unit still would not fire. On two prior occasions we had gotten it to ignite by using a jumper wire across the two terminals where the cockpit switch wires connect.  We tried that again and it lit up. It was producing a lot of black exhaust so I let it run long enough to clear up.

The jumper wire may be a coincidence but I developed a hypothesis that we could test.  If the initial switch closure provided a sufficient voltage and current to start the operating cycle but then dropped below some lower threshold the controller would never open the fuel valve or apply power to the ignition coil for spark and the blower would complete the shutdown purge stage of the operating cycle.  I recall a quote from Thomas Huxley:  “The great tragedy of science – the slaying of a beautiful hypothesis by an ugly fact.”  With the cockpit switch closed (on) Butch measured 12.7 VDC across the terminals without any noticeable drop.  Even so, we investigated the switch and it’s wiring to see if the contacts might be intermittent.  They were not.  We did discover that the small “grain of wheat” light bulb in the switch was not coming on even though the filament appeared to be intact and there was voltage on the wire pair from the Aqua-Hot that powers it.

One of the house systems switch panels. The Aqua-Hot burner switch is one of these.

One of the house systems switch panels. The Aqua-Hot burner switch is one of these.

We cycled the unit on and off several times and it ignited every time.  I removed the vacuum gauges and T-fittings, spliced the supply hose back together on the inlet of the Racor fuel filter /water separator, reconnected the outlet to the inlet of the Parker FPM-50, and installed a new piece of 1/4″ fuel line from the outlet of the FPM-50 to the inlet of the secondary fuel filter.  I checked all of the band clamps, turned the unit on, and it started right up.

I did a little more interior electrical work on Butch and Fonda’s coach, helped them install an FRP panel, and called it a day.  Since I was leaving tomorrow I did some preliminary packing of stuff in the bedroom.  I made and ate my dinner in the coach and then did some straightening up before returning to the house and turning in for the night.

 

2014/09/12 (F) Posted

Leave a reply

Linda was up very early to try and beat the morning rush inbound to Detroit from the northwest.  I took an Ibuprofen and went back to bed, finally getting up at 7 AM.  1-800-PACK-RAT was scheduled to pick up the 16 foot long storage container we have had in our driveway for the last two months and I wanted to be up and dressed when they arrived.  I did not have any problems with my teeth overnight.  They felt OK this morning but the upper right was still a bit sensitive to biting pressure.  I had a nice soft banana for breakfast and decided to keep taking the Ibuprofen and Tylenol.

I put a load of laundry in the washer and then ran out to take care of errands.  I stopped at Dunkin Donuts for coffee, Lowe’s for solar salt for the water softener, and then Teeko’s for coffee beans.  Jeff still did not have the Sweet Dreams decaf blend even though he orders it every week.  I got a pound of the Seattle Blend 50/50 regular/decaffeinated, and a pound of regular Brazilian Serra Negra to blend with the decaffeinated beans we already had at home.

Heather, from Root Canal Specialty Associates, called around 9 AM to check on me.  I mentioned the sensitivity and she said that was normal and to keep taking the Ibuprofen/Tylenol through the weekend to counteract any inflammation and/or discomfort.  She wanted to know if I thought the temporary filing was high and making contact before the other teeth.  I wasn’t sure, but she said if it was to call them Monday morning and they would get me in to adjust my bite.

Since I was on the phone anyway I called Bratcher Electric to see about the quote/estimate for the generator service / fuel changeover and the service entrance feed from the transfer switch to the sub-panel to change it into a main panel.  They have been very busy with repairing damage caused by the storms of the last few weeks.  We did not suffer any damage beyond some dead branches breaking off from trees, but south of us folks were hit much harder.  That kind of work always takes priority.

The day was overcast and dreary with morning temps in the mid-40’s and a high of 54, but that was OK; it was a perfect day for sitting at a desk and working on a computer, undistracted by either bad or gorgeous weather.  I did, however, bring my computer upstairs and work at Linda’s desk.  My office is very nice but it is in the basement and it is a bit of a cave.  Sometimes I like that, and sometimes I don’t.  I worked on our blog until early-midafternoon and finally uploaded posts from Aug 2 through Aug 20.

My only interruption was a visit from one of Roese Construction’s field supervisors who was checking on where the runs will go to connect the houses in our neighborhood to the natural gas main.  After looking at our situation he agreed with me and Mel who had looked at this a few weeks ago, that staying to the east of the east entrance to our pull-through driveway made the most sense even through it required them to bore at an angle relative to the main line.  That conversation confirmed that they will be horizontal boring the branch line rather than trenching it in.  He did not give me a firm date, but it sounded like it could be as early as tomorrow (Saturday) and likely by Tuesday next week.

My computer battery was down to under 1 hour of charge remaining, so I took it downstairs and plugged it back in to its power supply.  While I was down there I put another load of laundry in the washing machine.  Back upstairs I made a PB&J sandwich for lunch, along with some green tea.  I got back on the RVillage Mobile development site, played with a few more features, and provided some additional feedback to the development team.  I then worked on this post using my new Logitech Bluetooth keyboard.  The Wacom Bamboo stylus is nice, but the keyboard is the way to go when creating extended text.

Juniper, our female cat, was getting into something in the library so I went to investigate.  She had cornered a yellow jacket and was trying to figure out what to do with it.  I solved the problem for her by capturing it and putting it outside.  I don’t think she was pleased with my solution, but not 20 minutes later she was at it again, and it was another yellow jacket.  We have a nest in the soffit near the library that we need to get rid of, but we have not had a problem with them getting into the house until very recently.  Hopefully that has not changed but I will have to investigate the situation.  It may be that with the onset of cooler temperatures they are finding their way into the library through the recessed ceiling downlight cans.  If so, there’s really no good way to seal those.  Fortunately we can close of the house from the library with a kitchen door and a living room doorwall that includes a screen door.

It started raining very lightly around 4 PM, but never developed into anything.  Linda got home from the bakery at 5:30 PM.  The storage container had not been picked up yet so we called the 1-800 number and left a message with our callback number.  I got a call around 6 PM from the local (Plymouth, MI) office verifying the pickup and address.  The driver arrived around 7:20 PM and had the unit loaded by 7:30 PM.  After he left we headed to dinner at LaMarsa where we had crushed lentil soup and split an order of Koshary and salad.  Even splitting the dish we both ate too much, aided by the fresh-baked pocket bread and garlic spread.   The food and service were both excellent, as always, and the garlic spread was “…the gift that keeps on giving.”

We got back from dinner a little before 9 PM, too late to start any in-depth computer work, but early enough for me to finish this post and for Linda to do some recipe research for Sunday’s brunch.  It seems like only yesterday it was still light at 10 PM at night, but we are approaching the autumnal equinox, and there are noticeably fewer hours of daylight now.

 

2014/08/20 (W) Like A Well-Oiled Clock

Leave a reply

Darryll and Alec (DCM Heating & Cooling) were back today to continue working on the garage and library HVAC project.  I was talking to them as they unloaded tools and materials when I got a call back from Paul Keech.

Paul has changed the name of his company from Paul’s Tree Service to Detroit Tree Recycling and is also running American Mulch.  As I was told yesterday he is trying to focus on tree removal, especially wood lots with multiple trees, rather than tree trimming.  Among other reasons, the trees he removes provides the raw material for his mulch business.  Also, the guy who did most of his climbing the last ten years has moved on to another job and it’s hard for Paul to run a business when he’s up in a tree, even with a cell phone.  I tried to describe the trimming and removal work we need done but in the end we agreed that I would take some photos, put them in a Dropbox folder, and e-mail him the link.  He also encouraged me to get a couple of quotes from some companies more local to our new location.

While I was talking to Paul, Darryll found a small leak in the reducer at the T-fitting behind the garage and tightened it.  The pipe out of this reducer will bring gas into the garage and was the last piece of pipe they worked on the last time they were here.  Alec reset the pressure to 12 PSI and it appears to be holding better than it has up to this point.

In the course of the day, they…

  • …finished setting the Library furnace/air-conditioner and connected the parts together.
  • …cut the hole for the return air register and installed the return air duct.
  • …ran the supply air ducting from the top of the unit along top of the ceiling, over the top of the utility closet door, and then angled it to run along east wall at the ceiling.  All of the duct outside the closet is insulated.  Two flexible ducts will come off the top and run through the attic to supply air through ceiling registers on the east end of the library.
  • …marked the location for the two registers that will be at the bottom of two rigid ducts running down the east garage wall to supply air to the library just above the baseboard heat radiators.
  • …removed the old library window A-C unit and covered the hole with cardboard.  We will have to patch the opening on both sides with drywall and paint it.
  • …shut off the propane to the old library wall-hung space heater, removed the unit, capped the line (iron pipe), turned the gas back on and checked for leaks.
  • …connected the double-walled flue pipe for the library furnace.
  • …connected the double-walled flue pipe for the garage furnace.
  • …ran the 1/2″ iron pipe for the gas supply to the garage furnace.

They will take care of the air-conditioner condenser/compressor installation on a subsequent visit.  In the meantime I need to install electrical junction boxes for the two furnaces, which must have switches located within three feet of each unit.  I also need to run new 12 AWG 2+g NM cable for old A-C condenser/compressor and repurpose the existing A-C condenser/compressor wiring as an outside 120 VAC / 15 Amp outlet.

We still needed to repair drywall in the library and upper east garage wall and install new drywall on the lower east wall of the garage and on the new utility closet walls.  The lower half of the east garage wall is the next thing I have to do as I need to have it done before he comes back to finish the duct work.

I got a call from Chuck Spera just before noon letting me know that he was headed to his shop to pick up his old VDO bus tachometer and take it to Bob’s Speedometer Service on Bergin Road.  Bergin is an east-west road about one mile north of our house.  Bob’s was over at Old US-23, less than five minutes away.  I met Chuck there at 12:30 PM and we met with Matt who handles their VDO instrument repairs.  He tested Chuck’s tach and pronounced it broken but probably repairable, so Chuck decided to leave it there.

Matt did confirm for us that both the tachometer and the speedometer take a square wave input signal in the 3 – 5 volt range with deflection of the needle proportional to the frequency of the waveform.  Presumably this same signal regulates the speed of a motor that drives the gears of the odometer.  I had discussed this very situation with Mike (W8XH) just last night and he is willing to bring his 100MHz 2-channel storage oscilloscope and help us look for and trace these signals if needed.  Once we have known good gauges installed knowing what waveform to look for will help greatly with troubleshooting should they still fail to indicate the appropriate information.

After we were done at Bob’s I headed over to the Meijer’s northeast of M-59 and US-23 to get a few things for Linda.  By the time I got home, Glen Williams of Tenor Clocks LLC had arrived to service our grandfather clock.  I “broke” it about a month ago by trying to wind it at just the wrong time and it has not chimed since then.  It has also never been oiled in the 11 years since we bought it and Glen told us on Saturday that it should be cleaned and oiled every 5 – 7 years.  (We saw Glen at the GLCC/CCO rally in Clio, Michigan this past Saturday when we were there.)  Glen took the mechanism out and examined it and said that nothing was broken.  Apparently it finally bound up the last time I wound it from lack of proper oiling.  He cleaned it, oiled it, and checked it for wear but did not see any.  He reassembled it, checked the operation and timing, and said it was running smoothly and keeping very accurate time “…like a well-oiled clock.”

Although my time on the computer today was limited, I managed to post my blog entry for August 1st and started selecting photos for other posts.  I updated the Technical page on the SLAARC website with a document on low band antennas for Field Day use, and added a link to an online Smith Chart Tutorial.  I then updated the online roster.  I am at the point where I need to generate WordPress user accounts for the club members so I looked more carefully at the WP-Members plug-in documentation to see if there was a way to have the website e-mail each member as I create their account.  It appears that there is, but it will take a little more work on my part to get that set up and working correctly.  As I was working on this our AT&T DSL line started dropping out; again.

Linda spent part of the day preparing food ahead in advance of having company tomorrow.  She held back some of the crushed red lentil soup for our dinner and served it alongside sandwiches.  While we were eating we noticed that the phone said “Line In Use.”  We knew we were not using it, but I picked up one of the handsets, pushed “Talk”, and got a very loud, very noisy busy signal.  We checked all of the phones to make sure there wasn’t a problem with one of them.  There wasn’t.  When I checked again the message said “Check Tel Line.”  That usually means we won’t have a dial tone when we push “Talk” and that was, indeed, the case.

Ken is the service technician that has been out twice to try to resolve the problem and he left his AT&T cell phone number in case we had recurring problems.  He also left his manager’s name and phone number.  I called and left a message for Ken and then called and left a message for his manager, making it very clear that Ken has been working hard to resolve our problem and we are happy with the service he is providing.  I also tried to convey that the service disruptions are interfering with our ability to do things online, like edit websites.  It’s bad enough that the data rate is so slow, but we depend on our “always on” DSL service to always be on.

We went to Lowe’s after dinner to buy a couple sheets of drywall.  We looked for special cover plates with a switch opening in one half and a round hole in the other, but did not find anything like that.  We stopped at Teeko’s on the way back and had Jeff roast two more pounds of half-caff blends for us; one Ethiopian Yirgacheffe and the other Seattle Blend.  He was still out of the Sweet Dreams decaf blend, which we have him mix 50-50 with the regular Seattle Blend to make Sweet Seattle Dreams, but he is supposed to be getting some in his shipment tomorrow.

Back home we unloaded the drywall, had some fresh strawberries for dessert, and read quietly for a while.  I’ve been reading the PDF version of the 2nd edition of The Mobile Internet Handbook and am done except for the glossary and the appendices.  It is over twice as many pages as the 1st edition and is the definitive resource on connectivity for RVers in particular.