Tag Archives: Steven Gullette (HFH)

2016/03/18-20 (F-N) Detailing Brakes FGMCR Finale

2016/03/18 (F) R. V. Detailing

I was up at 7:30 AM, fed the cats, and made coffee.  Linda got up at 7:45 and got dressed even though she was obviously not feeling well and probably did not get a good night’s sleep.  I cleaned the cats’ litter tray and then got dressed.  We were expecting Nick’s R.V. Detailing sometime between 8 and 9 AM so we wanted to be up, dressed, and done with breakfast before they arrived.  Nick called at 8:20 to let me know he was running late and expected to be here around 10 AM.

We woke to overcast skies but by 8:45 the clouds had thinned considerably and we had direct sunlight on the driver side of our motorcoach.  A couple of days ago the forecast was for a 100% chance of rain today, not good for washing and waxing an RV outdoors, but that changed to 0% with overcast skies, which was perfect for the task at hand.  Either way, the high temperature was forecast to be 87, which is probably warmer than ideal for Nick, but it will be what it will be.

The delay in Nick’s arrival gave me time to finish my coffee and doodle on my iPad for a while before getting to work.  Linda went back to bed while I finished getting the outside of the bus ready for detailing.  I was able to unsnap all of the new windshield covers using the Zip Dee Awning rod except for one snap and the entry step stool got me up high enough for that.  I needed the 3-step stool, however, to get the covers off of the upper windshield wipers.  Linda came out in time to help me roll up the windshield covers, put them in their mesh storage bag, and store them in the front bay.  I moved the two Coleman bag chairs and the folding plastic side table to the pad area behind the coach house.  We went back inside to await Nick’s arrival and worked at our computers.  Linda eventually went back to bed.

Our Verizon billing cycle ends at midnight tomorrow night and as of 8:30 this morning we had 1.7 GB of data remaining out of 12.  We have done well managing our limited data plan this winter by taking advantage of free Wi-Fi connections to the Internet at Williston Crossings RV Resort (WCRVR), Big Tree Carefree RV Resort (BTCRVR), and now Florida Grande Motor Coach Resort (FGMCR).

The Internet connection at WCRVR was outstanding; fast and usable from our coach.  The Wi-Fi at BTCRVR and FGMCR was only available at the clubhouse buildings, but at least we had that.  The speed at BTCRVR was slow but usable while the speed at FGMCR has been pretty very good.  (Our Verizon cellular data speed at Florida Grande has also been the best we’ve seen this winter.)  We added 2 GB to our data plan in mid-January for three billing cycles by downloading and activating Verizon’s Go90 app.  We have not used the app, and don’t intend to, but the extra 2 GB of data certainly has helped and will get us through the remainder of this winter season.

We don’t stream videos so for us the main data management trick has been to defer as many updates as possible for our phones, iPads, and computers until we are connected to the Internet via a park Wi-Fi system.  We were forced into this tactic when needed to upgrade our computers to Windows 10 while we were at BTCRVR in January.  While that has meant taking our devices to a clubhouse, we have often combined this with doing the laundry.  Both BTCRVR and FGMCR also have libraries (FGMCR’s was especially nice) which provided comfortable/quiet places to sit and read or use another device while one updated.

Nick’s Detailing cleaning up our coach at FGMCR in Webster, FL.

Nick and his helper showed up around 10 AM as promised and got to work detailing our bus.  The trailer that Nick tows behind his F-250 has a pressure pump, a water heater, a pair of tanks for de-ionizing water, and a large plastic tank for holding the de-ionized water.  It also has large reels for long hoses and the various spray wands and other tools needed for their work.  They even carry a large rotary brush for cleaning concrete, which is one of their other services.

Linda spent most of the day in bed.  She rarely gets sick but this is the second time this winter, and both times it has hit her hard.  I took a few pictures of the Nick’s equipment, and of the two of them working, and then retreated inside the bus to work at my computer.  Other than an occasional e-mail my focus was on editing and uploading blog posts.  I uploaded the ones for December 1 through 6 to our website and edited the ones for the 7th through the 14th.

UPS delivered my Prevost parts order around 2 PM so I took time out to check it.  I had four packages with tags whose Prevost part numbers matched the packing slip which matched what I ordered.  I did not, however, open the individual boxes.  I also took a few minutes to upload the February and March 2016 issues of BCM to our Dropbox and e-mailed the link to Steven Gullette.  Steve was out team leader on the July 2016 Habitat For Humanity build in Sheridan, Wyoming and my 2-part article was about that experience.  I got a text from Joe letting me know that he was headed our way and found a place to stay.  He was going to check in and get a shower and would see us first thing in the morning.  I texted back to confirm and let him know that the parts had arrived from Prevost.  Linda got up around 4:15 PM and had me send a text message to Mara letting her know that we would not be able to make it to the water skiing show tomorrow in Winter Haven.

Nick and Jesse finished up at 5 PM.  They had also pressure washed the car for an extra $10 so the total was $310.  That was 12 man hours of work plus equipment and product and seemed fair to me.  (I knew the price in advance.)  They used Turtle Wax Platinum automotive wax, and it looked good.  They applied it with a buffer and rubbed it out by hand.  I’ve cleaned and waxed our coach by hand, so I know how much work it is.

I was putting the water softener, pre-filter, and bag chairs away when René and Ruth stopped in their golf cart.  They are long-term renters here.  This is their 4th season at Florida Grande MCR and they rented a site for an entire year but do not plan to be here all of that time.  They noticed that we had a vendor here last week (Bill and Brenda Phelan) making our windshield covers and wanted to know where we got the tire covers.  I chatted with René for quite a while before we walked back to the golf cart and included Ruth in the conversation.  They have rented a site for a month at one of the luxury motorcoach resorts in Petoskey and wanted to know more about the State of Michigan.  I agree to e-mail some information to them later this evening.

Linda was still under the weather and wasn’t hungry but I convinced her that it might be good for her, physically and mentally, to go for a walk around the resort.  She agreed and we took a slow stroll around the front/main loop.  Back at the rig I had a bowl of granola for dinner and got a call from Pat (& Vickie) Lintner to check on the progress of our brake repair.  They also wanted to know if we would be interested in going to Epcot for a flower show sometime while we are at Jetty Park.  They would drive as they already have a season parking pass.  They also have season passes to the Disney World complex but we would have to buy day passes for $100 each.  We said we would consider it when Linda was feeling better, but I doubt that we will shell out $200 just to spend seven hours looking at flowers no matter how spectacular they are.

We have had some expenses this winter that we had not planned on, but we were glad to be able to get tire and windshield covers from Bill and Brenda Phelan while in south-central Florida and consider them a necessary investment.  They are well made and they work, and Bill and Brenda are fellow converted bus people running a small business that we wanted to support.  We were also glad to be able to get our motorcoach washed on January 1st in Arcadia and then get it washed and waxed today at FGMCR.  We have a lot invested in our home on wheels and taking care of the paint is just one of many necessary maintenance expenses.

The problem with the driver side tag axle brake, however, was something we just did not see coming.  As of this evening it is not yet resolved and thus the final cost is still unknown and unpredictable.  It’s hard to consider spending $200 to look at flowers right now but our view of that may change if/when the brake problem is resolved and the final cost is known.  What this brake failure has raised, however, is the necessity of also rebuilding the passenger side tag axle disc brake caliper and both of the steer axle disc brake calipers.  The cost just for parts is approximately $500 per hub plus $280 per axle for brake pads, if needed.  In round numbers that is $2,500 for the four disc brakes not including labor.  I expect Joe will be working on this for 4 to 8 hours tomorrow just to keep us on the road, so that’s more cost.

I don’t begrudge Joe his pay, he earns it and deserves it, and parts cost what they cost; it’s all part of owning a bus.  What I don’t like is having this happen on the road where ready solutions might not be at hand or we might be forced into a solution that is more costly than it should be.  But most of all I don’t like how it unexpectedly interrupts our winter and planned activities.  Perhaps that indicates that I do not have the necessary “roll with the punches” mindset for the converted bus lifestyle, although I think I have handled it reasonably well in the 6-1/2 years we have owned this bus.  Linda pointed out that our two prior winters were relatively trouble free but the fact is that we had issues with the bus both seasons.  At this point I do not have as much confidence in it as I want and need to have in order to fully enjoy it, but I will keep working towards that goal.

Linda went to bed at 10 PM and I continued to work on this draft blog post.  I found a PBS fundraiser concert on WUSF channel 16.1 featuring The Smothers Brothers, the Kingston Trio, and many other folk groups and musicians of the late 50’s and 60’s.  When it ended at 11 PM I switched to channel 16.4, which is the Create sub-channel, and watched an episode of GlobeTrekker before going off to what would probably be a less than completely restful sleep.

2016/03/19 (S) Braking News

I was up shortly after 7 AM, anticipating Joe’s arrival at 8 AM, and made coffee.  He texted at 7:30 that he would not be here until closer to 9.  That gave me time to enjoy my coffee and put the finishing touches on yesterday’s rather lengthy blog post.  When I tried to upload the Word file to our Dropbox I discovered that my iPad was not connected to any of our Wi-Fi networks.  It asked me for the password for each one I tried, even after restarting it twice, and when I finally entered them it would still not connect.  My computer was still online via its usual Wi-Fi connection, so I knew that our network was functioning.  I will probably have to shut everything down and restart it, but I wasn’t about to get into that this morning.

Linda got up at 8:30 still looking and feeling like death warmed over.  I poured her some coffee and then went out a few minutes later to remove the hub cap and lug nut covers.  I noticed that the sky to the north, northwest, and west was a solid mass of very dark clouds so Linda pulled up The Weather Channel radar on her iPad.  We knew that the probability of rain at our location today was forecast at 100% with the possibility of thunderstorms, but we were not happy about what we saw in the radar image.  There was a large band of rain stretching from north of us southwest into the Gulf of Mexico well south of our latitude.  The band included larger clusters with cores of strong rain indicated.  Linda put the summary in motion and the entire band was drifting due east with movement along the front from SW to NE.  There was no doubt that we would get rained on this morning, it was just a matter of when it would start, how intense it would be, and how long it would last.

At 8:50 I drive up to the trash dumpster and then drove to the clubhouse.  There was a car parked by the gatehouse so I walked over there.  The gate attendants were there so I gave them my name and site number as well as Joe’s name and explained why he was coming to visit us.  Joe arrived at 9:10 AM and a few minutes later drove right past our site.  I quickly phoned him and told him to turn around.  He did not have his “camper” (bumper-tow trailer) with him so he pulled onto the pad and drove to the very back to get his tools as close as possible to the rear of the bus where he would be working.  He had his dog, Gracie, with him.  Gracie is at least part Pit Bull Terrier with perhaps some boxer.  She has a dark brown, slightly brindled, coat and is a pretty dog.  More importantly, she is very sweet, very well-behaved, and very mindful of Joe, who has trained her well and gently.  As Joe got ready to work I grabbed my camera.

Joe got right to work on the driver side (LS) tag axle wheel and did not need any power tools.  He loosened the lug nuts using a 12x torque multiplier and a standard torque wrench.  The torque multiplier is a special tool designed just for this purpose.  It has an arm that fits over an adjacent lug nut to keep the tool from turning, thus forcing the torque to be applied to the target lug nut in the socket.  We also have one of these tools along with a 3′ long torque wrench, both of which I bought from Butch last year.

Once Joe had the lug nuts broken loose he had me start the bus engine and raise the tag axle.  As happened to the other day it did not lift the tires clear of the pad.  He had me switch the suspension to Level Low mode and raise the rear end so he could position his chassis stands under it.  He then had me lower the rear of the bus until it was resting on the stands.  Finally, he had me raise the tag axle and this time the tires lifted clear of the pad.

Joe checked to see if he could turn the tire.  He could, although he indicated that it had a lot more drag than it should.  I told him that had not been able to turn it at all yesterday.  He loosened and then removed all of the lug nuts and then removed the wheel/tire and rolled it behind the bus out of the way.  It’s a big thing; 42″ in diameter, 12″ wide, and 100 pounds.  Working on buses is not for sissies and weaklings, although as an owner the two most important and powerful tools needed are a cell phone and credit card.

Mobile mechanic Joe Cannarozzi removes the DS tag tire/wheel to get access to the brake.

With the tire/wheel out of the way Joe removed the dynamic wheel balancer and was finally able to access the disc brake assembly.  The assembly includes the caliper, the automatic slack adjuster, and the pneumatic brake actuator.  The entire assembly is mounted to a bracket (torque plate, or “spider”) that is part of the fixed portion of the axle via two large steel mounting pins that allow the caliper to move (slide) when actuated.  When facing the axle hub from the outside end the mounting points are at approximately 9 o’clock and 4 o’clock with the caliper and brake pads to the lower left towards the front of the vehicle.  (On the passenger side the caliper is to the lower right, again towards the front of the vehicle.)  The only other connection to the disc brake assembly is the air line that attaches to the brake canister.  The tag axle brakes are deactivated when the tag axle is raised so there was no air pressure in the line and Joe disconnected it.

The mounting pins are locked in by what Joe calls “wedges” which are metal pins with a partial circular notch machined out at roughly the midpoint.  The mounting pins have a slightly reduced diameter at their midpoint.  The notch in the locking pin engages the reduced diameter and locks the mounting pin in place.  The locking pin, in turn, is pulled up snug by a castle nut which is then secured by a cotter pin so that nothing can vibrate loose.  With the locking pins removed Joe was able to tap the mounting pins out and wiggle the assembly to get it loose from the rotor and then lower it to the ground.  Easier said than done; the disc brake assembly is very heavy, awkwardly shaped, and not balanced.

The first thing we both noticed was how the brake pads were worn.  The front and back faces of each pad were not parallel and the change in thickness was mirrored.  That is to say, the thinner end of one pad was opposed by the thicker edge of the other pad.  This suggested to us that the entire disc brake assembly was not square to the rotor and that over time the pads had become worn to match this misalignment.  That, in turn, suggested that the wear pattern on the pads could be forcing the caliper out of alignment on the slide pins and that this might finally have gotten to the point that that caliper got bound up on the slide pins and could not retract.

The fixed mounting holes have pressed in bushings so Joe inspected those and said they looked and felt OK.  We also inspected the mounting/slide pins and said they appeared to be alright.  I fetched all of the parts that I ordered from Prevost and opened the box with the new slide pins.  Joe compared the fit of the new pins and the old pins in the existing sleeve bearings and said that he could not detect any difference.  He had about a dozen replacement sleeves and checked the old and new pins in one of the new sleeves.  Again, he could not detect any difference.  The sleeve bearings are pressed in and pressed out.  Joe did not have the specialized tools needed to do this but also thought it was unnecessary work.

When Joe went to remove the larger inside brake pad he had a very difficult time getting it out.  Part of the pad holder is supposed to slide between two machined faces causing it to move straight in and out, but it was wedged tight.  Joe thought this was another possible reason why the brakes were dragging.  Once he got it out and removed the other (outer/fixed) pad he tried using a hand file to ease the fit.  I suggested that we try one of the new brake pads instead and he agreed.

The DS tag axle air disc brake caliper.

Before installing the new brake pads Joe used a wire brush to thoroughly clean the parts of the caliper that involved moving pieces and got a considerable amount of rust, brake dust, and general fine debris to come loose.  He also backed off the automatic slack adjuster and was of the opinion that the main actuator mechanism was moving freely and probably not what had cause the brakes to bind.  At that point Joe thought that disassembling the caliper and trying to rebuild it on site was a bad idea and I was inclined agreed.  The kit has a lot of parts and doing this outside in the rain did not seem like a good idea.  The new inner pad was a better fit than the old one so he installed it along with the new outer pad.  He then reconnected the air line to the brake canister.

Now came the moment of truth; could the disc brake assembly be reinstalled (at all), and if so, without causing excessive drag on the rotor discs.  As I mentioned before, the assembly is bulky and heavy, but the answer to the first part was ‘yes.’  The answer to the second part was ‘sort of’, but ‘sort of’ is a much better answer than ‘no.’  Joe was a able to turn the hub by hand but it was harder to turn than he wanted.  He decided to have me start the engine and slowly pump the brakes.  Each time I released them I paused while he turned the hub 1/8 to 1/4 turn.  What he was trying to do was get the new brake pads to seat and get the caliper to move straight in and out.  After several times around he was satisfied with the way the wheel felt as he turned it.  It still had a bit more drag than he wanted but he thought it would be OK.  Short of driving to a shop like American Frame & Axle in Tampa or Prevost in Jacksonville, this was the best we were going to do as a roadside repair.

A light drizzle had started around 10 AM at which point I put my camera away, got out my raincoat, and got out an umbrella which I held over Joe as best I could while he worked.  By the time Joe had the brake assembly reinstalled it was raining harder; not a downpour or thunderstorm, but a steady rain, and I had already put all of the new parts away in the front bay.  Joe reinstalled the dynamic wheel balancer and then got the tire/wheel back onto the mounting studs.  He put all of the lug nuts back on finger tight and then used the torque wrench to snug them up and pull the wheel flat against the hub.  He then had me lower the tag axle, which did not require me to start the engine, and tightened the lug nuts to 650 pound-feet using the 12x torque multiplier with the torque wrench set to 65 lb.-ft.  Why 65?  There is some loss in the gearing of the torque multiplier and Joe has found that treating it as a 10x device seems to be perfect.

Joe gave me a dollar amount for the service call and Linda wrote him a check.  I feel that he has always been fair with us and provided technically competent service with good value, so I have never argued with him about what he charged me or tried to negotiate a slightly better “deal.”  That kind of negotiating, over what amounts to pennies in the larger view, just indicates to someone that I don’t value their work or that I think they are trying to take advantage of me or even cheat me.  In the end all that does is create ill will, which is ultimately not in my best interest.  When Joe, or anyone else, works on our bus I want them to be glad to do the work and happy that we are their customer; there’s too much riding on it to have it any other way.

Joe got all of bus tools packed up and then we chatted for a while before he took off.  His timetable from this point on is a little loose but he thinks he is going to be in Williamston, Michigan, sometime in early April.  That’s only 30 miles from our house, so we discussed the possibility of him coming to our place at that time to at least service the other three disc brakes.  That would require us to get home, of course, but with the mild winter up north that might be possible.  We do not have any plans beyond our scheduled departure from Jetty Park on March 29th.

After Joe left I explained to Linda what he found, what he did, and why he thought the brake was fixed and would probably work properly now.  I then sent a short text message to Butch Williams, Chuck Spera, Pat Lintner, and Ed Roelle updating them on the status of the situation.  These are four of my five “go-to” bus guys, the fifth being Bill Gerrie from Ontario.

Pat called me right away.  He and Vickie we’re glad to hear that the problem was probably resolved and we would be arriving at Jetty Park on Monday as scheduled.  Linda had looked at the website for the home and garden show at Epcot Center and had me indicate to Pat that we would like to go assuming she is sufficiently recovered from her illness and we can find a nice weather day.

Not long after I got off the phone with Pat I got a call from Chuck.  Chuck’s interest in our brake situation is based on more than just the concern of one friend for another.  He and Barbara have an H3-40 VIP Liberty Conversion that is only one year newer than ours.  That means he likely has the same exact brake components as we do and is potentially facing the same failure/repair/maintenance issues as us.

While I was on the phone with Chuck Linda checked the Livingston County Road Commission website and found that the Spring Seasonal Size and Weight Restrictions had been lifted from all of the roads.  That meant we were clear to return home at any time.  We have had a good winter in Florida, and are looking forward to our week at Jetty Park, but we are not feeling the need to linger here to avoid freezing temperature back home.  Indeed, the last week here has been hot and if that continues we will definitely be ready to leave.

After the phone calls I made vegan cold cut sandwiches for lunch and got out our vitamins.  After lunch Linda went back to bed and I started working on the draft of this blog post.  Linda got back up around 3 PM.  By 5 PM I had finally captured the details of today’s events.  Linda spent part of the afternoon researching and purchasing Easter holiday gifts online for our children and grand-daughters.  She was out of tissues, so I drove to the Dollar Store in Webster to buy more.  When I got back I sat at the desk and edited another week’s worth of blog posts from mid-late December 2015.

As I was wrapping up my work to have dinner Adobe CC notified me that two updates were available.  That meant Lightroom and Photoshop, and we have them installed on both of our computers.  Our Verizon billing cycle was due to reset at midnight tonight and as of dinnertime we had used 10.927 GB out of 12.0.  This a bit of a game with us, and we like to use as much data as we can without exceeding our plan.

Around 6:30 PM Linda started fixing dinner in spite of still feeling pretty lousy.  She improvised an Udon noodle dish with broccoli, carrots, onions, and mushrooms and a citrus soy sauce which really gave it a spark.  She is taking OTC medications for her “cold” so she had water to drink while I had a glass of Arbor Mist Mango Moscato.  It’s growing on me.

I felt the need to get up and move around a bit after dinner while Linda felt the need to rest.  I took both of our iPads and my smartphone and walked up to the library in the FGMCR clubhouse to use the resort Wi-Fi to update them.  I had 10 app updates on my phone (estimated at 150 MB) and three on my iPad (200+ MB) while Linda had four on her iPad (200+ MB).  Rather than compete with myself I updated my phone first and then Linda’s iPad while I worked on this blog post on my iPad.  I then updated my iPad.  Even though we had 1/12 of our monthly data plan remaining at 7 PM these updates would have used over half of that.

When I was done updating our devices I walked back to our rig.  PBS out of Tampa / St. Petersburg was fundraising (again), this time featuring folk/rock/pop musical performances from yesteryear, so we left that on for background entertainment.  I uploaded one blog post from December 7, 2015 but was not in the humor to do more this evening.  I was monitoring our data usage closely and decided to update Adobe Lightroom on my computer.  It was 300 MB so I decided to defer the other three Adobe updates until tomorrow when I can take our computers to the resort library and do them there.

By this point Linda had long since gone to bed so I upgraded her laptop to ESET Smart Security 9 (SS9) which then required activation.  That was not the case on my computer and I had to go through a process of converting a username and password to a license activation key and then using that to activate the product.  While the upgrade was downloading and installing I installed the My Verizon Mobile app on my iPad.  I had to look up our account credentials but it would not let me log in.  It was getting close to midnight when our billing cycle would end and was telling me to “try again later.”  With that done I started following the procedure on ESET’s support website for updating drivers that Windows 10 is unable, or unwilling, to handle.

The ESET SS9 program was reporting that 16 or 17 driver updates were needed but I had to write them down on a sheet of paper.  These are manual, one-at-a-time, updates made by using the Device Manager to select a device, select “update driver,” and then select “search the computer and Internet for a more up-to-date version.”  If it finds one it installs it, which might then require a restart of the computer; a tedious and time consuming process for even one update.  I did 4 or 5 of these updates successfully but was too tired to do them all.  As it approached midnight we had used 11.6 of our 12.0 GB data plan and at the stroke of midnight the usage reset to zero (0).  Having successfully managed our meager 12 GB data plan (per monthly billing cycle) for the second month, squeezing out as much data as possible without incurring overage charges, I went to bed.

2016/03/20 (N) FGMCR Finale

Linda got up at 6 AM to take more medication and then went back to sleep on the sofa.  I was unaware of that at the time and found out when I got up at 7:45 AM.  I sat in one of the captain’s chairs with Juniper on my lap finishing yesterday’s blog post draft and then started today’s.  I finally got up at 9 and made coffee.

I worked most of the morning and early afternoon uploading blog posts from December 2015 to our website, taking time out for a few chores, and managed to upload the posts through December 20th.  I got a loaf of bread out of the freezer around 10 AM to let it thaw.  I made toast at noon for an easy meal.  With lots of nice puffy white clouds around, and a forecasted high temp of 79 degrees F, I put out the awnings on the driver (southeast-facing) side of the coach, turned off the residential air-conditioners, opened the windows and roof vents, and turned on the ceiling exhaust fans.  I grabbed my Tilley hat and walked the trash down to the dumpster.  I love my Tilley hat.

At 1:30 PM I powered down my computer and took it to the library at the resort clubhouse along with my iPad.  The music jam was taking place in the main room at 2 PM so I closed the connecting door.  That made the volume just about right and I enjoyed the background entertainment while I updated and blogged.  The musical genre was “country and gospel” (of course).  Not my kind of music, but the musicianship was high enough to be pleasant and the participants were obviously enjoying themselves.

When I first powered up my computer the disk drive light sputtered for a long time and the screen remained blank as though it was having trouble starting.  I powered it off, let it sit a minute, and then powered it back on.  This time the HDD light came on and stayed on, flickering slightly, which is what it normally does on startup.  It took a long time for the startup screen to appear, but it eventually did.  This behavior is, unfortunately, not unusual following updates, but the failure to start up could indicate a developing problem with the HDD.  I installed a number of updates last night, but had restarted the computer several times without difficulty.  Adobe Creative Cloud (CC) notified me that there was an update available for Photoshop CC (2015) but I already knew that; it was my main reason for going to the library to use the resort Wi-Fi connection to the Internet.

With Photoshop updated I turned my attention to updating device drivers.  As I described yesterday, this is a manual, one-at-time, process.  I got five drivers updated without needing to reboot the computer but the 6th one required a restart.  This time the start screen came up fairly quickly and I was able to connect to the resort Wi-Fi and log in without difficulty.  I then continued updating drivers.  There were two drivers for printers that we do not own, and a driver for the Intel WatchDog Timer (Intel WDT).  Try as I might, I could not locate the Intel WDT within the device manager and thus could not update it.

It’s possible the WDT is not enabled in the BIOS of my computer; from what I saw on the web not all manufacturers utilize it.  I restarted the computer to make sure things were fully installed and configured, and just to make sure it would (start up).  When the HDD light finally went out I checked for Windows 10 updates.  It reported that my device was up-to-date but ESET SS9 was still indicating an update to a driver I updated last night.  I updated it again and then restarted the machine once again.  I let it start up fully and then powered it down and went back to our coach.  I will go back later and update Linda’s computer.  I will also try to update our Rand-McNally RVND 7710 GPS navigation system, and perhaps our Garmin 465T GPS navigation system as well.  There’s a Wi-Fi Room at the west end of the clubhouse and I think I will try working there.

Back at our coach the bed was clear so I got out the computer cases.  I also needed the USB tether cables for the two GPS navigation systems.  I thought the cables were stored inside the sofa so we had to remove all of the cushions to get access to them.  As long as they were off, we rotated them.  The cables were not there so I looked in several other places before finally looking under the bed and finding one there.  Fortunately it fit both GPS units.  I packed up both of our computers, including the power supplies, my iPad, and put the two GPS units in my computer case.  I piled everything in the front seat of the car and drove back to the clubhouse, but this time I went to the Wi-Fi room.

The Wi-Fi room has four small desk tables set against the walls and a slightly larger round table in the center of the room.  Each desk table has a comfortable office type chair on casters and an outlet strip to supply AC power to portable devices.  I was the only person there and picked the desk table in the darkest corner to set up my equipment.  I got both computers plugged in to AC power and started them up.  There was a wireless access point visible in the room, so I connected to it instead of the SSID I normally use at the other end of the building.  I figured the stronger signal would provide a more reliable, and perhaps faster, connection.  I then connected the Rand-McNally TripMaker RVND 7710 GPS navigation unit to my computer with an appropriate USB cable and turned it on.  Once it connected with my laptop the Rand-McNally Dock software opened automatically and informed me that there was an OS/firmware update available for the device and also a map update.

I did the device update first and it took about 10 seconds.  I then started the map update.  At one point it told me the download would take 13 hours to complete, and that was after it had been downloading for an hour.  The R-M map update process is almost 4 GB of data and often does not complete successful.  When that happens everything is lost and you have to start over.  Basically, you can’t do the update on a limited/metered data plan, which is why I was sitting in the FGMCR Wi-Fi room trying to do it using the resort’s Internet connection.

With the map download under way I opened ESET SS9 on Linda’s computer to see what updates it thought were available.  I tried yet again to install the update for the Microsoft Visual C++ 2012 Redistributable, and once again it did if not seem to work correctly.  Windows 10 Update said it was available, said it downloaded it, and flashed the screen about six times that it was installing, before finally indicating that everything was up-to-date.  I tried to repeat what the ESET technician did on my machine by locating and repairing the update, but unlike my computer it did not appear in the list.  It really looks like I will have to get online with ESET again and gave them work some more of their remote magic.

Next I decided to update some of the indicated drivers on Linda’s computer.  I opened ESET SS9 again, went to available OS updates screen, and wrote them down.  I was able to update four of the 11 but could not find the other devices in Device Manager.  On my computer there was only one driver of any importance that I could not locate, but Samsung and ASUS obviously do not do things the same way.  What was surprising is that ESET SS9 is identifying updates for device drivers that do not appear to exist.  I restarted Linda’s machine to make are sure everything was OK and it appeared to be.

Two other people showed up (a couple) and were web-surfing and streaming some videos on separate devices.  All of which was fine; they had as much right to do that as I had to do what I was doing, perhaps more if they are owners, but I doubt that any of us were getting great data speed.  I started the update for Adobe Lightroom CC (2105) on Linda’s computer anyway, knowing that it was approximately 300 MB and would likely take a while.  Linda has lost her voice so I texted her the status of my work and suggested that she get out a folding chair and sit outside for a while in the lovely fresh spring air and sunshine.

Another couple came in to Skype with someone but decided to set up their tablet in the Billiards Room so as not to disturb the rest of us (or keep their conversation private, or both).  A short time later the first couple left and my map download, coincidentally, speeded up quite a bit.  I initiated the update of Adobe Photoshop CC (2015) on Linda’s computer and the map download on my machine, not coincidentally, slowed way down.

I had a brief chat with Butch Williams between 8 and 9 PM EDT.  He and Fonda were also preparing to move on tomorrow from their RV Park in Huahauca, Arizona. Their next waypoint was Deming, New Mexico but he did not know if they would make it in one day.  I was finally finished with my computer and GPS unit updates by 9 PM (except for our Garmin 465T) and returned to the coach.  Linda had held dinner, which I appreciated.  We did not have to be up at the crack of dawn so we stayed up a while and watched TV before turning in for the night

 

2014/12/26-31 (F-W) Wrapping Up 2014

Note: This post covers the last six days of 2014. It is long and there are no pictures.  Sorry.  🙁

2014/12/26 (F) Cool Letters

When we woke up at 7 AM the temperature was 41 degrees F but by 8:30 it had dropped to 35.  According to the Weather Channel app on our iPads we have a freeze warning posted for the overnight hours tonight (Saturday 0000-0800).  The 12-day forecast is for an extended period of cooler temperatures with highs in the 50s and lows in the 30s, including a few nights near freezing, but that is normal for Q at this time of year.  Desert regions are not always hot and actually experience an extreme range of temperatures.  The forecast back home has lows dropping into the teens with one night forecast at 13 degrees F.  Burrrrr.

Connie was apparently tracking the weather in Q as well, even though she and Joe are back in Nevada for most of the winter, as she called to ask me to turn the water off at the street if the temps got down to freezing.  The city water system here has supply pipes that come straight up out of the ground near the street, turn horizontal, go through a valve, then through a pressure regulator or small meter (not sure which or both), go through another valve, and then turn 90 degrees and go back down into the ground.  Joe and Connie keep all of this covered under a wooden box and we have noticed other properties doing the same thing, but not all.  Although the temperatures here can/do drop below freezing in December and January it is never for more than a few hours just before sunrise.

Presumably the city water lines are deep enough to avoid ever having freezing problems, but I do not know how deeply the pipes are buried on Joe and Connie’s property.  The main thing at risk are the stand pipes that come up out of the ground at each RV site and any hoses that are attached to them. I discussed all of this with Butch as it seemed to me that it would have to get below freezing and stay there for quite some time before we would have any problems.  It also seemed to me that if we were going to turn the main water supply off we should open a faucet on each of the supply risers so the water would have somewhere to go as it expanded.  (Water expands as it cools, reaching a maximum volume at around 34 degrees F.  As it changes state from liquid to solid it actually contracts slightly in volume.)  To be really safe we would need to drain all of the flexible hoses.  That struck both of us as unnecessary.

The aisle lights did not work again last night.  It’s always something with a RV and you have to be psychologically prepared for that or the lifestyle will drive you crazy.  This problem has occurred before and the usual reason is that the (3-way?) switch by the dinette gets toggled and renders the push switch in the bedroom inoperative but that was not the case this time.  One of the three wires that go to that switch was only attached by a few strands and broke when I checked it.  None of the connectors are in good shape so repairing those connections moved to the top of my bus project list today.  I did not get to this today, I only moved it to the top of my list.

While I made our morning coffee Linda put together an Amazon order.  Amazon Prime has worked well for us and Butch has already successfully received a UPS shipment here, so it was easier to order a bag of Science Diet cat food for delivery to our bus than to deal with the limited hours and selection of the local veterinarian or drive to one of the larger surrounding cities in the hope that a pet supply store that might stock the specific formulation we feed our cats.  She also ordered two bottles of Hach SofChek water hardness test strips and some additional silicon utensils.

Linda had our holiday letters stuffed and addressed on Christmas Eve, but not in time to get to the post office before it closed at noon, so she went today, bought stamps, and sent them on their way.  Hopefully they will arrive by New Year’s Eve while folks are still in the holiday spirit.

Sometime during the morning we got a visit from missionaries of the (local) Jehovah’s Witnesses cult.  Our conversation did not last long.  After they left I was pondering this day after Christmas visit and it occurred to me that perhaps they do an inventory of Quartzsite and the surrounding BLM camping areas so they know when someone knew has pulled into town.  I guess saving souls can be a lot of work.

Linda was doing the dishes and the Black & Decker SpaceMaker coffee carafe broke.  She checked online and was going to order a generic replacement but decided she should check the model of our unit.  When we lifted it up to look for the model number we discovered water on the shelf underneath it.  Ugh.  Suddenly we were no longer looking for a carafe but a new coffee maker.  We removed the cabinet door, latch, and lower front retaining bar and pulled the unit out.  I then removed the shelf, wiped it off, and took it outside to dry in the sun.  There are definite advantages to being someplace with bright sunshine and low humidity.

We spent a long time researching a replacement.  The particular model/style of SpaceMaker we have has not been made for years (of course), was only available used (naturally), and only for exorbitant prices (can you believe $300?) on Ebay.  To add insult to injury all of the reviews were negative, noting in particular that the unit tends to develop leaks.  Ya think?  We looked instead for something we could install, or at least store, in the same cabinet cubby as the old one.  Most of the countertop models were too tall and most of the built-ins and under cabinet models were too big, and very expensive.  We ended up ordering a simple Proctor-Silex non-programmable countertop unit without a clock for under $20 on Amazon Prime so the price included the shipping.  The reviews were good and it will store in the corner cabinet with room to spare for coffee canisters, freeing up space in the pantry for other things.  We will have to take it out and set it on the counter to use it, but that’s OK.

As noted in a previous post, there are quite a few houses and RVs around town with Over-The-Air (OTA) TV antennas on top of 20-30 foot poles and pointed approximately NNE.  There is one antenna in particular that we have seen a lot, a high-gain (directional) rotatable unit, and there are several vendors selling it as part of a kit.  The unit has an integrated amplifier and rotor and includes the rotor controller and power supply, plus 50 feet of coax and control cables.  All of the vendors are selling this kit for $70.  That’s a lot of stuff for that price, which suggests something about its quality (not good).  Another vendor is selling the poles and fittings that all of the other vendors use to build their “booths” (tents).  They have a huge assortment of connectors and will cut the sections to length if asked.  Getting the antenna 20-30 feet in the air would cost about $35.  We have been pondering whether it is worth it to us to spend this money as our bus-mounted antennas have always worked in the past and this is the first place we have been where they will not pick up even a trace of a signal.  We do not have an OTA TV antenna set up at home and it occurred to me that buying one here made more sense if it could be used back at the house.  I spent quite some time online researching long-range DTV antennas but did not come to any conclusions.

I needed a break from working at my computer and drove over to K & B Tools to see if they had shorter poles.  In the 1″ diameter they had 10′ and 8′.  The 8′ length would work well for us.  Three sections with two connectors would get an antenna 20-25 feet up depending on the mounting and we can store 8′ lengths in the front bay of the bus or in the car for transport.  We would use a base section with a flange by the driver side mirror, put a couple of long spikes through the base to keep it from moving sideways, slip the bottom pole section in it, and bungee cord the next section to the mirror support arm after wrapping it with something to keep it from scratching the paint.  Before making a purchase, however, I decided to do some more online research.

The unit being sold by several vendors is the Vortex HD from SewellDirect.com so I checked their website.  The unit is discontinued and they are selling the same kit online for $25.  That means the unit is of even cheaper construction than I originally thought and the $70 asking price suddenly seemed very excessive.  Many of the online reviews confirmed that this was not a serious antenna.  Another vendor had the Vortex and two competing units all for the same $70 price and I have concluded that they are all equally junk.

One of the websites I spent some time at was AntennasDirect.com. They appeared to have some serious antennas, with prices to match.  One of the challenges in this situation is that it appears we need to pull in OTA TV signals from a very long way away here in Q (70+ miles), whereas at home the distances are more like 40 miles.  Here in Q all of the signals appear to be coming from the same direction (although no one can explain why) so a high-gain, highly directional antenna is ideal and does not need to be rotated once it is aimed.  At home the TV signals potentially come from 270 degrees and the correct solution is an antenna with a broader reception pattern combined with an accurate and repeatable rotor.  If we do not need the rotor in Q we can forego that expense and technical complication until we get home.

One of the websites directed me to www.antennaweb.org.  This site is sponsored by the Consumer Electronics Association (CEA) and the National Association of Broadcasters (NAB).  You enter your ZIP code, and optionally your address, and it tells you what TV stations you might be able to receive and what direction the towers are from your location.  I put in the ZIP code for Quartzsite and it indicated five stations (ABC, CBS, FOX, NBC, and Independent), all 11 miles away at 234.8 degrees.  There are towers on top of a mountain in direction but they do not look like TV towers.  The direction was also surprising as it is almost 180 degrees opposite to where everyone has their antennas pointed.

As we know from our ham radio hobby RF waves can do strange things.  At the frequencies used for OTA Digital TV (DTV), however, things are “line-of-sight.”  The local speculation is that there are “repeaters” to the NNE but if that was the case I would expect the website to indicate that as the signal direction.  Another possible explanation is that the signals are coming over the mountains to the SW and bouncing off of the more distant mountains to the NE.  I would expect some multi-path distortion in this case, as the signals scatter off the mountains and arrive at the antenna from different directions, but if the antenna is sufficiently directional it might eliminate this problem.

My plan for today had been to work on my Exterior Makeover article for Bus Conversion Magazine and I finally got started on that late in the afternoon.  I finalized my selection of photos (I think) and split them up into those that will go in line with the article, print and digital, and those that will appear in the extra section of the digital edition.  I had just begun post-processing them when Linda started preparing dinner.  I have been wanting some pasta and tonight I finally got my wish.  She made a whole wheat linguine with mushrooms, onions, garlic, kale, sun-dried tomatoes, and asparagus.  What a treat.

I stopped over at Butch and Fonda’s bus to let them know about the www.antennaweb.org website.  Butch was watching an archived webcast that Technomadia did a few months ago with Nina Fusing, of the WheelingIt blog, on health care options for full-time RVers.  He had also installed Echolink software on his laptop but it was failing the Internet Connection test for UDP (User Datagram Protocol) ports.  The error messages indicated that it was probably a firewall- and/or router-related problem.  He had both so I tried opening UDP ports for forwarding in both places but it did not fix the problem.  I have never played with Echolink or UDP ports, so I was trying to figure out what to do in real time.  More research will obviously be needed.

I continued working after dinner processing photos for my article.  I received my draft of the Zena Power Generating System article back from Gary with corrections made by Stacy, his new administrative assistant.  I accepted them, made an additional correction, and returned it.  They are trying very hard to get the December 2014 issue out on December 31st and my Zena article will be one of the four in that issue.

2014/12/27 (S) Cool Temps

By 6:30 this morning our various weather apps were reporting that the temperature in Q was 31 degrees F.  At 7:00 I turned the thermostats up and climbed back in bed (electric heating pad).  I had not shut the main water supply off at the street last night so at 7:30 I got up, put on my “sweats,” grabbed a jacket, and went outside to tend to the water.  I cracked opened a faucet at each standpipe, ran water through hoses, and ran water through the hot and cold lines for both sinks in the apartment.  I shut everything off and went back inside where it was comfortably warm.

By the time I came back in Linda was up and making coffee.  How was that possible?  We have a single serving coffee funnel that sits on top of a mug.  It’s designed for cone filters but she simply folded one of our flat bottom filters and made it fit.  She ground up some beans, boiled some water in the microwave oven, poured it over the grounds, and let it drip.  I did not think we would have morning coffee in the coach again until the new coffee maker arrived next week so it was a nice treat.

I finished yesterday’s blog post while I enjoyed my brew.  I was busy enough yesterday that by the time I went to bed and tried to finish it there was too much to write and I was too tired to write it.  Linda developed a headache overnight and spent much of the day medicated and resting.  She does not get these very often anymore but when she does they put her out of commission for a day or so.  I then spent most of the day processing the photos for my next BCM article.

I took a break after lunch and worked with Butch setting up his laptop to work with Echolink ham radio software.  The software use TCP and UDP ports and requires firewalls and routers to be configured to provide port forwarding.  His laptop OS is Windows Vista, which has the Windows Firewall.  I was not familiar with UDP ports, had never set up port forwarding, and had never worked with Vista, so I was feeling my way as I went.  Their computers are connected to the Internet one of two ways, MiFi or WiFi, although the WiFi is sometimes connected through the MiFi.  Their MiFi is a Verizon Jetpack (Novatel 5510L), just like ours, so I (sort of) knew my way around that device.  Their WiFi setup consists of two WiFi repeater/routers; the WiFiRanger Mobile and the WiFiRanger Go2.  We also have a WiFiRanger Mobile, so I also knew my way around that device (sort of) but I had never worked with the WFR Go2.  We got the Echolink software to test successfully through the WFR gear using the WiFi signal at our campsite but we could not get it to test successfully through the MiFi.

In the early evening Butch called and said he was having Internet connection issues.  I went to their bus and worked four a couple of hours trying to sort out what was going on.  I was able to get him back online but saw some strange behaviors that we could not explain and were not able to resolve.  He has Nick Russell’s Gypsy Journal Blog set as his Firefox home page and it kept redirecting to the website’s home page.  I tried opening it in Internet Explorer 9 and it opened without difficulty.  Website’s do not always react the same way with different browsers, but he had been on Nick’s blog earlier in the day using Firefox.  I will have to look at it again tomorrow.

When I got back to our coach Linda was starting to prepare dinner.  It felt very cold outside even though the weather apps said it was 41 degrees F.  I decided to turn off the water supply at the street and opened some of the faucets to relieve the pressure in the pipes and let some of the water out.  Dinner was leftovers from our Christmas Day meal and everything was very good the second time around.

I finished up my photo editing a little before 10 PM and backed up my files to the NAS.  We turned the three thermostats on and set them for ~15 degrees C (~59 degrees F).  We put the extra blanket on the bed and I turned my electric heater pad up to 4. The forecast low for tonight was in the low 30’s and it was already 36 when we turned in for the night.

2014/12/28 (N) Cooler Yet

Our cats snuggled in with us more than usual last night.  They like the extra blanket and the heater pads as much as I do.  At sunup the air temperature was reported as 28 degrees F, a few degrees lower than the last forecast we saw before we turned in last night.  If it seems that we are preoccupied with the weather it is because we are in closer contact with it when RVing than we are when we are at our house.  In the motorcoach we have to more actively manage our utilities to ensure they work properly and to maintain our comfort.

We had tea instead of coffee this morning.  Until about 15 years I did not drink coffee and enjoyed morning, afternoon, and evening tea.  Hot, of course; I have never been a big fan of iced tea and I have never developed a taste for iced coffee, unless it was a Starbucks Frappuccino (in my pre-vegan days).

Linda was finally feeling better and went for a long walk this morning.  Before she left I noticed that there wasn’t any water coming out of the bird fountain so she unplugged it and helped me partially disassemble it so I could clean it.  I ended up taking it completely apart, which was fun given that it was made of large slabs of granite, in order to get to the pump so I could clean it.  I was surprised to find a small gecko-like lizard inside the pedestal base.  Butch helped me reassemble and level the unit, allowing the reservoir to hold more water, and we got the outlet tube (fountain) tightened up so the water once again squirts about four inches above the tube.  It needs to be filled every day or two.  I have not determined if the water is being consumed by birds (there are a lot of doves and Gambrels Quail here) or evaporating (low humidity and sunshine).  It is probably a bit of both.

I worked on my article most of the day, inserting photos into the Word doc and writing captions.  I took a break mid-afternoon and rode into town with Butch.  We found the LED vendor where the hams (amateur radio operators) hang out but the booth was closed.  We wandered around looking at flea market junk and I found a set of four ratcheting tie down straps, 25mm wide by 15 feet long, for $5.  I had seen similar straps at another vendor for $14, so I bought the $5 set.  We stopped at Dorothy and Toto’s Ice Cream Parlor on west Main Street and bought some excellent kettle corn.

Back at the coach I continued working on my article but was having trouble keeping my eyes open so I took a nap.  Linda had started making dinner about the time I got up when a white SUV pulled in that we had not seen before.  A reddish-chocolate-brown dog appeared and took off after some of the rabbits followed by a man with a leash.  We figured Jim and Barbara, the owners of the third motorhome at our camp, had arrived so we put our shoes on and went out to meet them.  Jim got Roho on leash and Barbara appeared shortly thereafter, followed by Butch and then Fonda.  It was dusk and cooling off quickly, so the conversation was short before everyone returned to their motorhomes.  Before going in I turned the water off at the street and opened one of the faucets on our standpipe to relieve the pressure and let some of the water out.

For dinner Linda made skillet black beans with potatoes and tortillas.  Besides the title ingredients it had onions, garlic, poblano pepper, and salsa.  I added a little Tabasco Chipotle sauce to mine.  We each had a glass of sangria, which was refreshing with this hearty dish.  After dinner I finished working on my article and I uploaded it to the BCM folder in my Dropbox.  I sent an e-mail to the publisher, editor, and new administrative assistant.  I then started uploading the photo files and went to bed.

2014/12/29 (M) Cool Cruiser Redux

We had English Breakfast Tea to start our day, followed by store bought (bulk) granola for breakfast.  We have run out of Linda’s homemade granola and I really miss it.  The stuff we buy at the store just doesn’t taste like much of anything by comparison.  After breakfast I started working on my next article for BCM.  Actually, it was an article I wrote back in February of this year but had not quite finished.  Besides the text I had already selected the photos but, as often happens, I had not finished the process of putting them in order, sorting them into print edition and digital edition extra section, post-processing them, and inserting thumbnail versions into the Word document.  So that’s what I started working on this morning.

Late morning I took a break from the photo work and pulled the cover off of the dashboard to check the turbo boost gauge.  It was, indeed, a mechanical gauge with a very small nylon tube coming out the back of it.  I opened the Prevost CatBase Viewer and looked up the part, thinking I might order one today.  The specified part was a VDO gauge, 1/8-27 NPT, but did not give the mounting hole size, the, range, or the sweep degrees.  Both 24V and 12V bulbs were listed.  I think we need 24V.  What I found interesting was that the gauge for the VIP (conversion shell) was shown as “dummy,” which meant the unit was originally shipped with a filler plate rather than an actual gauge.  The turbo boost gauge in our coach is functional but is the wrong gauge for our engine. It’s a Sentry vacuum/boost gauge.  The vacuum side is useless on our turbocharged engine and the boost side only goes to 15 PSI, which is not high enough.

VDO makes two turbo boost gauges that should work as replacements.  Both are 2-1/16 (52mm) size, 0 – 30 PSI, 270 degree sweep, mechanical units.  They come with 12V bulbs but those are easily changed.  The differences are in the faceplate markings and the mounting systems.  The Cockpit Series gauge is marked in 1 PSI increments, which I prefer, but uses the traditional rear U-bracket to hold the instrument in the dashboard.  The Vision Series gauge, which is what our new speedometer is, has 2 PSI increments but mounts using a collar that threads onto the body of the instrument from the back side of the dashboard.  I was going to call Prevost and order a gauge but both gauges are available from PartDeal.com, which is run by ISSPRO.  ISSPRO sells their own line of gauges in addition to VDO and other brands.  I was chatting with Butch and he mentioned that they were closed for the holidays and would reopen on January 2nd, so I did not order a gauge today.

We left around noon and drove to the vendor area at Central Avenue and Kuehn Street.  We parked the car and wandered around checking out vendors who were not set up or open the last couple of times we were here.  While we were strolling I got a call from Frank Morrison.  Frank was at the Arcadia Bus Rally in Arcadia, Florida and wanted to know if we were there.  I photographed Frank’s bus, the Cool Cruiser, at last year’s rally and the article was the cover story in the June 2014 issue of Bus Conversion Magazine.  Frank said that in the welcome bag each attendee received there was a second bag from BCM and in that bag was the June 2014 issue.  Cool.  I wrote two other articles for BCM as a result of that rally.  The February 2014 issue was on the rally itself and the April 2014 issue featured the Iron Horse, an Eagle bus conversion.  Both articles ran in the cover/centerfold position.

For lunch we had chickpea salad on sourdough bread with dark greens and were surprised to see a Trek motorhome backing in to the property.  Jim and Barb obviously knew the people and helped them get parked.  Once they were in their site we went out and introduced ourselves, as did Butch and Fonda.  Jack and Maria were only here for the night.  They had been camped at the BLM Pyramid Lake LTVA, about 60 miles south of Quartzsite, but developed issues with their solar charger and a squealing/screeching noise when they start their engine.  They had appointments first thing in the morning to have these problems addressed and were planning on heading back to the desert tomorrow.  Barb mentioned that she had talked to Joe and Connie and Joe said we did not have to turn the water off at night.  One less chore is good by me.

Linda went for another power walk while I worked on my article.  I want to get my “almost finished” articles done and off to the magazine so I can work on some new pieces.  It’s easier on me and them if I can keep the pipeline flowing and stay ahead of them.

For dinner we had soy riblets with barbecue sauce, macaroni and cheese (gluten and dairy free), and fresh sautéed green beans.  The riblets were tasty, as always, and the green beans were excellent, but the mac & cheese was not good eats.  It was the second of two boxes we bought somewhere and Linda even added some things to try to improve them but it didn’t help.  We won’t be buying this product again.

Having spent a portion of the day processing photos I did not feel like doing more of that after dinner.  I played a few puzzles on my iPad while Linda played word games on hers with Karen and Ron.  We were in bed by a little after 9 PM and I went right to sleep.

2014/12/30 (T) Trash Day

Tuesday is trash day.  The collection truck comes at noon so the trash can has to be to the curb by 11AM.  I happened to glance outside as we were sitting down to enjoy our mourning tea and it was already at the curb.  Jim or Barb are responsible for this when they are here, along with maintaining the apartment and laundry room, and one of them had obviously taken it out.

Jack and Maria pulled out around 8:30 AM with Maria driving their Trek and Jack following in their SUV.  We figured we had seen the last if them and did not even get to say ‘goodbye’ so we were surprised when they returned an hour later and backed their motorhome back into their spot and leveled it.  They left in their car fairly soon thereafter and did not return until later in the day.

Linda went for her usual morning walk and I continued working on my Habitat For Humanity article for Bus Conversion Magazine.  Around 11:15 AM my Bluetooth mouse signaled that its battery was critically low and needed to be recharged.  I plugged it in and figured that was a good time to take a break and do something else.  Butch was outside with his tool bay open and Jim was out there with Roho so I went out and chatted for a while.  I needed to repair the connections on the front switch that controls the aisle lights so I borrowed Butch’s VOM, wire stripper, and terminal crimper and got three 1/4″ female crimp connectors from him.  I have all of these tools and supplies, but his were more convenient.

Being a 3-way circuit the switch has three wires.  It’s a double-pole double-throw switch so it had a second set of unused contacts.  I used the VOM to determine if the unused set of contacts worked as expected.  They did, so I removed the old connectors, one at a time, cut the wire loose from the connector, cut about an inch off of the end, crimped the new connector onto the wire, and pushed the connector onto the corresponding unused terminal.  I tested the circuit and I was able to turn it on and off from both switches.  (The other switch is in the control panel in the bedroom by my side of the bed).

My recollection is that the 3-way circuit feature did not work prior to this.  That could have been because the wire that broke off the other day was only attached by a few strands, or because of a failure in the switch on that set of contacts, or both.  The plastic insulated housings on the old connectors were very brittle and showed signs of heat damage, which could have occurred as the result of a very marginal connection.  When I tried to pull them off of the switch terminals they shattered.  I was also unable to pull the metal connectors off of the lugs and had to pry them open and then pry them off.  The first 1/2 inch of each wire was also discolored and brittle, indicating heat damage.  I did not bother to check the other set of switch contacts for correct function as the lugs also showed signs of heat damage and I do not plan to use them again.  In fact, I plan to replace the switch if/when I happen to find one or get around to ordering one.  The whole repair, including borrowing and returning tools, took less time to do than it took me to describe the work in this post.

Linda confirmed that our Fedex delivery was scheduled for today.  We have been rationing the cats’ food the last 48 hours and they are confused as to why.  They do not usually finish the dry kibble in their bowls but insist on having fresh kibble added each morning and evening.  To accommodate this expectation we have been adding very small quantities of fresh kibble to their bowls.  I don’t think cats can count, but they can definitely tell the difference between serving sizes of kibble and are not pleased at our puny offerings.

Jack and Maria returned sometime during the afternoon.  I saw them pull in but did not note the time.  We had sandwiches for lunch and then went for a walk.  We headed southwest from our campsite and worked our way over to Moon Mountain Avenue.  Our destination was the Salvation Army Store but we stopped to look at things along the way.  We checked out the Mountain Quail Cafe, but the only thing on their menu we could eat was the side salad.  Too bad, it looked like a cozy, comfortable place and the sign said they featured ‘home cooking.’  Well, not our home, of course.  ‘Home cooking’ is usually code for “everything is cooked in butter, we make liberal use of eggs and dairy, and treat bacon as a condiment.”

Moon Mountain Avenue between Main Street and Quail Trail seems to mostly be developments rather than individual lots.  We stopped at one place that had a lot for sale at the corner of Moon Mountain and the entrance road.  All of the lots were separated on three sides by the exact same low brick wall construction that we have seen all over town.  Some of the lots had the brick wall with a gate across the front.  As we were studying this lot the man across the street pulled out and drove over to see if we had any questions.  We really didn’t, but he answered them anyway.

It turned out that most of the developments on Moon Mountain Avenue were co-ops.  The price on this particular lot ($49,900) did not buy you a deed but rather a fractional ownership of the co-op with a lease for the perpetual use of that particular lot.  The price also included compensation to the current leaseholder for improvements to the lot, and whatever appreciation in value the market would bear.  You were free to sell your ownership share along with the leasehold for your lot, or will it to your children.  (This co-op, like many of the RV Parks in town, was a 55+ community, so it would be a long time before our “kids” could use it if they were interested, which I doubt.)  The annual maintenance fees for this co-op were $56/month ($672/year) and included water, sewer, property taxes, and association dues; everything except electricity.  Each site had its own billable electric meter.  The only added expense would be property taxes for improvements, such as a park model trailer or RV port.

We were glad we stopped and that this fellow was willing to share this information with us.  We suspect that many of the similar looking areas around town are probably also co-ops or even developments with deeded lots.  Every little thing we learn like this helps us develop a better understanding of Quartzsite.  BTW:  the Salvation Army store was closed.  We have walked or driven by at various times on different days and have yet to find it open for business.

When we got back to camp Linda needed a few things for dinner and thought the Road Runner Market might have them.  She grabbed Fonda and they took off in our car.  Butch was working on his HF mobile ham radio antenna on the roof of their bus and Barb was scurrying around the property taking care of things.  I was going to help Butch but got a phone call from Michele Henry of Phoenix Paint to discuss the spots on our roof and what to do about them.  Once we were done talking I was able to lend Butch some assistance with the antenna project which involved the installation of bonding (grounding) straps between the antenna and the roof of the bus.

The FedEx truck showed up before Linda and Fonda got back so I opened the box and unpacked the contents.  The kitties recognize Science Diet cat food bags and were very happy to see it.  I was opening the new coffee maker when Linda returned.  We got it unpacked and stored in the cubby where the old one was installed.  She had started cleaning and rearranging drawers before our walk so she finished putting everything away or set aside things she had decided she did not need to have on board.

I’ve been needing a haircut for a while and prevailed on Linda to take care of it while we still had sunlight.  After she was done I used the clippers to trim my beard and then put everything away.  Linda checked our log book and according to our records the last time we dumped our holding tanks was on the 20th.  We like them to be as full as possible before dumping, as they evacuate better but cannot let them overfill so we decided to dump them while it was still daylight.  Better safe than sorry.

I got another Hach SofChek water hardness test strip from Butch and checked the output of our water softener.  It measured 7 on a scale of 0 (soft) to 25 (very hard).  A reading of 7 is considered ‘hard’ water but the softener was still working somewhat as the water coming straight out of the tap measured 25.  We still had 1/3 tank of fresh water and I decided to add 1/6th of a tank, about 20 gallons, and bring it up to the 1/2 level.  I will have to recharge the water softener tomorrow before adding any more water to our tank.

I was able to finish editing photos while Linda prepared dinner.  She cut a large poblano pepper in half lengthwise and stuffed it with leftovers from two nights ago.  She also made Mexican rice from scratch using Texmati rice, onions, garlic, tomato sauce, cumin, and vegetable broth.  The peppers and rice were very good and went well with a glass of sangria.

Early this morning I thought I might finish my HFH article for BCM and be able to upload it this evening, but that did not happen.  I still needed to insert the thumbnails into the Word document and write the captions.  I was too tired to start that work, knowing how long that would take, so I played a few puzzle games and went to bed.

2014/12/31(W) Adios 2014

The polar outbreak that is gripping most of Canada and the U. S. A. has also made its presence felt here in Quartzsite.  The overnight low was 35 and we had light rain.  The high today won’t break 50, and the lows for the next two days are forecast to be in the upper 20s.  Not that far from us (~180 miles) Joshua Tree NP had a rare dusting of snow and the forecast for Flagstaff is for as much as 16 inches of holiday whiteness.  The temperature back home is in the teens, so we have no complaints about the weather in Q.

Linda went for a long morning walk and found the Salvation Army store open.  Apparently their hours are 8 AM to 1 PM Monday through Friday and we had managed to always walk past outside that time frame.  She picked up a few things from the Road Runner Market while she was out.  By the time she got back at 1 PM I had just finished inserting photos into my Habitat For Humanity article and captioning them so I had her proofread it.

With the proofreading done we had a bite of lunch and then drove to Blythe, California to pick up some grocery items that are not available here in Q.  We stopped first at the AutoZone store, in the northwest corner of the Albertson’s parking lot, and bought supplies for cleaning the bus.  Now all we need is a nice warm day so we can get out early and work at it until we are done.  We need to do the car, too.

We got a TXT message from our son while driving back to Q.  It was a short video of grand-daughter Madeline climbing into her car seat all by herself.  That led to an exchange of messages leading to the question from our daughter as to whether she could climb out by herself.  That question will apparently be answered tomorrow.  The growth from age one to age two is quite amazing.

When we got back to our coach I carried in the groceries.  While Linda put them away I added 30 gallons of water to our fresh water tank.  I really wanted to recharge the water softener first, and bought a 40 pound bag of solar salt at Albertson’s for that purpose, but it was too late in the afternoon and too cold to start that process.  I still need to fabricate the special perforated tube for the water filter housing, so it will take longer than a normal recharge.

We had some hot tea and cookies and relaxed for a while.  Linda finished proofreading my HFH article and I then went through it one more time to make sure it was ready to upload.  She also e-mailed Mara, one of the women who participated in the HFH build, to wish her a happy holiday and see what part of the country she was in at the moment.

Dinner was a simple, easy affair; a nice salad of fresh greens with other goodies mixed in and a couple of Asian noodle soup bowls.  Sometimes Linda does not feel like cooking and we keep a certain amount of packaged convenience food on board for such occasions.

It has been our tradition since we started dating in high school to stay up and celebrate the coming of the New Year.  We rang in three calendar changes while dating and have observed 42 more since getting married.  Tonight was number 43.  For all of that time we have rarely gone out on New Year’s Eve, preferring to stay close to home and off the streets.  Besides, large, loud parties have never been our style, especially since I do not dance.

When we were dating, and in the early years of our marriage, we would spend the holidays in the St. Louis, Missouri area visiting family.  My parents hosted a New Year’s Eve party that, in retrospect, was quite a large and well-attended event, and that is where we hung out, often joined by a few friends from our high school days.  As we attained legal age a champagne toast became part of the tradition (although in the privacy and safety of my parents’ home we probably started this tradition a bit sooner).

As our children came into the picture we still traveled to St. Louis but when they got a bit older we started spending our holidays at home.  Linda’s sister, Marilyn, started visiting us between Christmas and New Year’s and the tradition of assembling a 1,000 piece jigsaw puzzle on New Year’s Eve began.  Linda usually did not cook a New Year’s Eve meal.  Instead we had California Dip (made from Lipton’s Onion Soup mix) and chips, jumbo shrimp with cocktail sauce, smoked salmon, and other munchies that we nibbled on throughout the day.  This was, of course, all pre-vegan.  Starting around 11 PM we would turn the TV to one of the networks doing the countdown from Times Square in New York City.  I think it was ABC as we usually watched Dick Clark.  At 11:55 PM we would open a bottle of champagne and fill our glasses.  When the ball dropped and the clock struck 12 we would toast the New Year.

Since our children became adults they have spent New Year’s Eve with their friends and families.  Besides Marilyn we have had occasional guests at our house but more often it has been a quiet evening at home with just the two or three of us and we often went to bed shortly after the arrival of the New Year.  The last two years have been unusual in that we moved to a different house in 2013 but have never celebrated New Year’s there.  Given that we plan to do most of our extended RVing from mid-fall to mid-spring it may be quite (if ever) before we celebrate New Year’s at the new house.

For the 2013-to-2014 change we were at the Arcadia Bus Rally in Arcadia, Florida where we attended a party with 200 other people and a live band.  We spent much of the evening outside where the volume was about right and the temperatures were pleasant.  This year we are camped on private property in Quartzsite with three other couples, none of whom seemed interested in staying up until midnight, so we toasted the New Year in the privacy of our coach three times before going to bed.  We are unable to receive OTA TV signals here, so we watched (listened to) the ball drop in Times Square on Linda’s iPad (at 10 PM MST) and shared a champagne toast.  She then sent TXT messages to both of our children.  At 11 PM MST we shared another champagne toast.  I sent a TXT message to my sister and niece while Linda sent one to her sister, all of whom live near St. Louis, Missouri in the Central Time Zone.  At our local midnight we shared our final toast and welcomed the New Year in the Mountain Time Zone.  If we had been so inclined we could have driven to Blythe, California, returning temporarily to 2014, and celebrated the coming of the New Year in the Pacific Time Zone.  But we didn’t.  That kind of thing is more fun to “brag” about than it actually is to do.

Before turning in for the night I updated my article status spreadsheet and then uploaded it to the BCM folder in my Dropbox along with the HFH article and associated photos.  I then e-mailed the team at BCM to let them know it was there and wished them a Happy New Year.  I also e-mailed a link to a PDF version of the article to Steven Gullette, our team leader on the HFH build that was the main focus of the article, and wished him a Happy New Year as well.  So endith another year.  Adios 2014.