Tag Archives: SLAARC breakfast

2016/04/21-25 (R–M) Bad Brakes & More

Leave a reply

2016/04/21 (R) More Bad Brakes

[NOTE:  There are no photos for these posts.]

We were up before 8 AM, had coffee in the living room by the warmth and glow of the fireplace, and had fruit for breakfast around 8:45 AM.  We left at 9:40 to take my car to Brighton Honda for its 110,000 mile service appointment at 10 AM.  Linda followed me in the Civic to drive me back to the house but as long as we were that close to Brighton we decided to go to the Verizon corporate store.  To our surprise, the store was permanently closed.  We were pretty sure there was still an “authorized retailer” a little farther down on Grand River Avenue (which never made any sense to me) but after the authorized retailer in Arcadia, Florida was unaware of the Mi-Fi device I was interested in (AC791L) I really wanted to talk to someone in a corporate store.

We did not investigate further as to whether the store had been moved and, not having any other business in Brighton, we headed home.  On the way I got a phone call from our State Farm insurance agent’s office about a long-term care premium that was due last month.  Apparently one of our children did not recognize it was a bill when they checked our mail and did not alert us to its presence.  It wasn’t a big deal, and Linda took care of it when we got home.

I started a load of laundry and settled in to work at my desk.  I did not have a reply yet to my support ticket for our WiFiRanger.  I checked-in to RVillage and saw that our member status had been upgraded to GOLD.  I did a search for used tractors and was researching a portable water deionizing system at AutoGeek.com when I got a call from Curtis Coleman of RVillage.  While Curtis and I were talking I got a call from Gary at Brighton Honda.  He left a message and I called him back.  The rear brake rotors and pads on my Element needed to be replaced.  It seems we have not been able catch a brake break in the last six weeks.

Linda made a haircut appointment with Renee for tomorrow at 10 AM but got a call back from Renee that she was not working tomorrow.  Renee had an opening at 1:15 PM today so Linda took that instead.  It was already noon so Linda heated a can of Amy’s Chili and we split that for lunch along with some fresh black grapes.  We left at 12:40 PM for the drive to Twelve Oaks Mall.  I went along because I wanted to stop at the corporate Verizon store in Novi.

I don’t usually go along with Linda to her haircut appointments since she now cuts my hair at home, but it was good to see Renee again.  She did a nice job with Linda’s hair and we were out of there in under 30 minutes.  For many years the Verizon store was located on the Twelve Oaks Mall property near Twelve Mile Road but it recently moved, so we put the address in the GPS unit.  The new location was nearby on Novi Road just the other side of I-96 from Twelve Oaks and West Oaks Malls.

We were assisted by Christina, who was both knowledgeable and helpful.  We went in thinking we might upgrade both of our phones and our Mi-Fi device and increase our data plan.  I was interested in the AC791L Mi-Fi device.  They did not have one in stock but she knew what it was and said we could have one delivered to our house on Monday via FedEx.  We then looked at phones and Christina steered us towards the latest offerings from Motorola.  We selected one for pricing purposes and she worked up the costs, including a higher data plan.

The new phones would have each cost $26 a month for 24 months, and the extended warranties would have been another $11 each per month for as long as we cared to pay it.  The phones had some nice features—specifically a shatterproof screen, wireless charging, and a screen-facing flash (for those all-important selfies)—but $74/month ($37 x 2) for two years seemed like a lot of money to us, especially given that our Samsung Galaxy S3 phones still work just fine.  Another negative for us is that the new phones are also bigger and we like the size of our S3’s.  Besides, I have a belt clip flip-top soft case for mine that fits nicely and works well.

Offsetting the increased phone costs was the fact that the line charges for our phones would drop from $40 per month per line to $20 per month per line.  Also, the $80 we currently pay for 10 GB of shared data per billing cycle would now buy us 12 GB of data for the same time period.  Finally, upgrading the phones would get us an additional 2 GB of data per phone per billing cycle for “life”, so our 12 GB plan would actually be 16 GB.  We would lose the bonus data, however, if we ever reduced the monthly gigabytes on our plan.

In looking at the cost worksheet I noticed that for $100 per billing cycle we could get 18 GB of shared data and bump that up or down at will without losing anything.  In the end we bought the AC791L Mi-Fi device for $90 ($100 with a $50 rebate and a $40 activation fee), changed the data plan to 18 GB for $100 (per billing cycle), and decided to keep our current phones.  Ignoring the one-time charges connected with the new Mi-Fi device we increased our monthly data from 10 GB to 18 GB, got a new/better Mi-Fi device, dropped our monthly cost from $180 to $160 (before taxes), and were not locked in to anything.  Christina also said to keep our eyes open for special deals on phones, especially around Mother’s Day and Father’s Day.  Roger that, and will do.

By the time we got back to I-96 and Grand River Avenue (GRA) in Brighton it was 3 PM so we stopped at Brighton Honda to check on my car.  While waiting for parts the technician got shifted to another job so my car was not ready yet.  Making a left out of the dealership onto GRA is always difficult and can be impossible in heavy traffic.  Our solution is often to turn right and go to Panera on GRA just south side of I-96, which is exactly what we did.  They did not have any decaf brewed but were happy to make some for us.  It had been cool and overcast all day so we sat by the gas fireplace and enjoyed several cups of coffee.

While we were sitting there I took a minute to call Philip Jarrell and let him know we were back in town.  We discussed the French drain he installed at the west end of property last fall, which seemed to be working well, and the trenching on the other side of the road, where the culvert empties, which had become a small pond.  I mentioned that the new driveway and RV pad looked nice, and that I really wanted to get the ham radio tower erected this year.  That project would require his services for a morning.  By 4:15 PM I had not heard anything further from Gary at Brighton Honda so we drove home.

Gary called at 5 PM to let me know the car was done and the technician was test driving it to make sure everything was correct.  The dealership was open until 8 PM, and we did not want to fight rush hour traffic, so Linda fixed dinner.  We had a salad of arugula and Italian kale with slivered almonds and dried cranberries, microwaved sweet potatoes, and vegan Italian sausage.  Everything was very tasty and I particularly liked the spices in the mock sausage.  Linda tries to make our diet primarily plant-based whole foods, but not having been vegans for most of our lives we find a certain satisfaction (comfort) in the occasional veggie burger, soy hotdog, seitan stroganoff, or other “mock” dish.

After dinner I hung up some laundry and started another load in the washer.  I checked e-mail and had one from my niece Amanda.  She and Ryan were looking at Wednesday, September 27, 2017 as a wedding date and wanted to know if all of us could make it to Hermann, Missouri for the event.  I replied that it would not be a problem for Linda and me and cc:d Brendan and Meghan.  I then texted both of them to alert them to the e-mail.  I also had an e-mail from Kate de Fuccio wanting to know when we expected to be back in Michigan.  I let her know we were back and had gotten preoccupied with opening the house and unloading the bus, but I felt bad that I forgot to text her as soon as we were home.

I also had a reply to my WiFiRanger support ticket requesting that I send screen shots of three of the tabs in the control panel.  I replied that I would try but did not mention that I really wasn’t sure how to do that.  Linda (the Google Queen) suggested that I “Google that” so I did.  It turns out that “alt+prtsc” captures the current window as an image and copies it to the clipboard.  From there you can do what you want with it.  Easy breezy.  (I subsequently ended up with something called “Easy Capture Manager” on my computer that just requires me to push the “prt sc” key and then lets me select what I what to capture.)

By 6:545 PM we were headed back to Brighton Honda to retrieve my car.  Linda dropped me off and returned home.  I paid the bill and returned home a few minutes later.  Thursday night is CBS comedy night and by 8 PM we were ready to just sit and laugh.  But first I had to transfer some of the laundry from the washing machine to the dryer.  I worked on blog posts while being entertained and hung up the dry laundry before going to bed.

2016/04/22 (F) Networking

I was up a little later than usual last night and would have slept in this morning but the cats had other ideas; they always do.  We were up by 8 AM and I made a pot of the Costa Rican Terrazu half-caff coffee that we bought yesterday at Teeko’s Coffee and Teas.  We were both still a little tired, and the thick fog further subdued our moods.  We countered that by treating ourselves to an easy start to our day enjoying our coffee in the living room to the warm glow of the fireplace.

We eventually got dressed, had breakfast, and got on with our day.  Linda got a call from Bill, who handles computer and networking technology for the bakery, and he walked her through the VPN setup for the bakery’s upgraded server.  She then made a grocery list and went shopping.  When she returned I discovered two boxes on the front porch.  UPS had obviously been here without my being aware of it.  The large box was the Instant Pot Linda ordered the other day and the small box was my prescriptions, which I was not expecting to see for another week.

My main focus for the afternoon was dealing with networking issues.  I uncoiled a long Cat 7 Ethernet cable that I found in the ham shack yesterday.  I unplugged the network cable for Linda’s computer from our AT&T gateway/router and plugged in one end of the Cat 7 cable in its place.  I took the other end of the cable into the bus, plugged it in to the HP Color LaserJet 3600 printer, and turned the printer on.  I brought my laptop computer upstairs, connected it wirelessly to the gateway, and tried printing a simple Word document without success.  I checked the printer settings and the TCP/IP addressing mode was configured for a manual address that did not match the address range of our home network.  I reconfigured it for DHCP and it acquired a new IP address in the correct range.  I tried printing again but it still did not work.  I reconfigured the address in the printer device properties on my computer and was finally able to print.  That was a relief as we would really like to leave this printer on the bus and have it networked rather than operating from a USB cable.

I then turned my attention to the WiFiRanger Mobile Ti (WFR-MTi).  I took my computer to the bus so I could use it to control the WFR and capture screen shots.  I was able to connect it to the WFR without difficulty but the WFR could not “see” (detect) any external Wi-Fi signals even though it is on the roof outside the bus and my computer could see them from inside the bus.  Back in the house I plugged in the Amped|Wireless SR20000G Range Extender / Router and configured it to repeat the AT&T gateway which does not broadcast a very strong signal.  Back in the bus my computer could see the strong signals from the Range Extender but the WFR still could not detect any external Wi-Fi signals.  I captured the screen shots for the MAIN, WIFI, and SETUP tabs, as requested by technical support at WiFiRanger, and pasted them into Word documents for uploading to their support system.

I took my computer back to my basement office and cabled it in to the network switch.  I wrote a reply to the WiFiRanger tech support thread, attached the screen shots, and posted it.  Clearly the WFR is not working and I am certain I will end up requesting an RMA and returning it for service, probably sooner than later, but I wanted to start with the online tech support system in case they had any good ideas that had not occurred to me.

Linda spent the afternoon getting acquainted with the Instant Pot and running it through its test procedure.  It checked out as fully functional so she used it to prepare seitan stroganoff for dinner.  I laid down at 5 PM and napped for an hour, finally getting up at 6 PM when Linda put our dinner salads on the table.  She served the stroganoff over brown rice with a side of steamed broccoli and the whole meal was wonderful.

We sat in the living room until 8 PM and then decided to watch Sleepless in Seattle on PBS.  I had forgotten what a good movie it is and enjoyed seeing it again.  Linda fell asleep right after the movie ended and I watched Episode 6 of Ken Burn’s JAZZ before calling it a night.  Like all of Ken Burn’s documentaries, JAZZ is a masterpiece of historical storytelling.  At some point I would like to watch all 10 episodes back-to-back.

2016/04/23 (S) Ham & Eggs

Today was our first Saturday back home, and that meant it was also our first opportunity to have breakfast with our fellow amateur radio operators (hams) from the South Lyon Area Amateur Radio Club (SLAARC).  Before going to sleep last night I set wake-up alarms for 7 AM this morning, but I was awake before then and had time to grab a quick shower before getting dressed.  I also took a few minutes to reattach the ham radio antenna to the magnetic mount on my car and reinstall the ICOM IC-2820 radio control head and microphone.  Even so, we were still on our way by 7:30 AM and arrived at George’s Senate Coney Island on the north edge of South Lyon around 7:50 AM.  During the drive I was part of a group chat with Steve (N8AR), Mike (W8XH), and Bill (W8NN), who was on an HT while riding with Larry (K8UT).  The Yaesu Fusion repeater sounded good and it was good to be on the air again with friends.

Besides our coffee, dry toast, and dry English muffin, Linda and I split a fresh fruit plate.  It was OK at best, but we don’t go for the food.  It was good to see and talk to folks in person and to be back into this part of our “at home” routine.  Today was testing day so a few people left to run the testing session, but most of the group, which numbered 19 people, stayed until 10 AM.

There was an accident this morning on westbound I-96 just east of the US-23 interchange.  It was still being cleared when we drove home so we got stuck in a traffic backup that could easily have been avoided.  Fortunately we did not have to be any particular place by any particular time and worked our way slowly through the congestion.

Back at the house I worked at my desk while Linda started cooking black beans in her new Instant Pot as she wanted to use some on a salad for our lunch.  Normally she would have to soak dry beans overnight and then cook them for quite a while, but the Instant Pot, which can function as a pressure cooker, took them from bag-to-plate in 45 minutes, during which time Linda went for a walk.  Pressure cookers can be very useful.

Once we got back to our house my initial task was to proofread and markup corrections to my article in the latest draft of the June 2016 issue of Bus Conversion Magazine.  Once that was done I uploaded the PDF to a folder in my Dropbox and e-mailed Gary and Jorge that it was there.  Next I checked my WiFiRanger support ticket and discovered that my reply yesterday, with screen shots attached, did not post correctly.  I replied again and this time it posted correctly, or at least appeared to.  With that task taken care of I copied a few images from the Sony a99v camera to my computer.  I then started transferring files from my computer to the NAS that we had with us in the bus.  I was about to start copying files for from that NAS to the older one we left at home when Linda called me up to lunch.

She made a large salad for each of us with tomatoes, blueberries, sliced strawberries, black beans, slivered almonds, and dried cranberries with a balsamic vinaigrette dressing.  She also made some hot tea after lunch which we took to the living room.  Both of us were tired and by 2 PM laid down and took naps.  It was 68 degrees F in the house but it felt very cool.  I think winters in Florida and Arizona have reset my comfort zone from 70 degrees F, plus or minus, to 78 degrees to 80 degrees F.  Jasper found a sunny spot on the floor by one of the living room windows and Juniper curled up with me.  I got up at 3:15 PM and took my iPad out on the deck to work in the crisp air and warm sun.  Linda came out around 3:45 PM but decided it was too cool and went back inside; I did the same around 4 PM.

Linda arranged for us to meet John and Diane Rauch at Camelia’s Mexican Restaurant at 6 PM.  Camelia’s is walking distance from our old house, but we never walked there because the route was not pedestrian friendly.  It’s a half hour drive from where we live now.  I reinstalled the cellular booster in my car and we left at 5:20 PM to leave a little extra time in case we encountered traffic problems.  And sure enough, we did.  The right lane of eastbound I-96 was closed where it ties in to southbound I-275 as the right lane continued to be closed for a construction project.

Our children’s grade school vocal music teacher, Jennifer Davidson, (who moved here from Tennessee) once remarked that Michigan only has two seasons “winter and road construction.”  Truer words were never said.  We stayed to the left, because that’s what we had to do to get onto eastbound I-696.  Although traffic was slow it was moving, unlike the right hand lanes trying to stay on I-96/I-275.  Vehicle speeds returned to “normal” once we got past the split, which around here is 5-to-10 MPH over the maximum posted limit, and a few minutes later we exited the freeway at Orchard Lake Road.  This is the same exit we used for 35 years to get to our house, and I have undoubtedly used this exit more than any other Interstate highway exit in country.  It was familiar, yet strange, as we rarely get back here anymore except to visit with John and Diane, meet someone at Camelia’s (or one of the other many restaurants that can be accessed from the Orchard Lake Road exit), or go to our optometrist or veterinarian, both of whom are two to three miles south of this exit.

We had our fill of chips and salsa and split an order of vegetarian fajitas.  They were OK, and much better than the ones we had a week ago at Mi Camino Real in Logansport, Indiana.  After dinner we went to John and Diane’s house, which is very close to the restaurant, and continued a nice conversation in a quieter setting.  By 9:30 PM we were all tired and started wrapping up our visit.  We left a little before 10 PM, got home at 10:30 PM, and went right to bed on stomachs that were still very full.  WTVS (Detroit PBS) was fundraising around an early Rolling Stones performance that did not grab my interest so I watched Lidia’s Kitchen and the beginning of Martha Stewart’s Cooking school.  She was filleting fish so I turned the TV off and went to sleep.

2016/04/24 (N) Family

We went to bed on full stomachs last night and I did not sleep well, suffering from indigestion for much of the night.  I should have used a second pillow and tried sleeping on my back with my head elevated, but that is not a natural sleeping position for me and I doubt that would have slept any better.  To compensate for the poor sleep I stayed in bed and kept falling back to sleep.  Linda was up way before me, having apparently slept better than I did, and I finally got up to stay at 9 AM.  That was unusually late for me, but at least I felt somewhat rested.

As soon as I got up Linda sliced oranges for our breakfast and prepared to toast bagels while I prepared our morning coffee.  We were not quite done with our preparations when I got a phone call.  It was from Chuck Spera so I answered it.

Chuck and I talk frequently but not usually at 9:30 AM on a Sunday morning.  He and Barbara were on the road and had just crossed into Kentucky on I-75 having left Sevierville, Tennessee early this morning.  Before pulling out this morning Chuck had noticed a little oil by the driver side tag axle during his walkaround, specifically in the holes of the Alcoa aluminum wheels.  He had removed the decorative hub cap and found an oil film there as well, but did not see any pooling.  He assumed that an axle seal was leaking a little but was not sure how to check the oil level in the hub or add oil if needed.  Because of both past and recent experiences, Chuck figured I would know the answers to both questions.  While that was probably unjustified optimism, in this case I did, and gladly shared what I knew about the sight glass and rubber plug in the wheel hub for the oil reservoir.

We had just finished our bagels and orange slices when Brendan texted Linda to see about plans for today.  We had all planned on getting together at Meghan and Chris’ house this afternoon to visit and have dinner but Madeline had come down with Hand, Foot, & Mouth disease (a virus) earlier in the week and Brendan thought he might be getting it too.  Given that Linda had not yet fully recovered her hearing we agreed that it would be best to avoid contact until we knew that no one was contagious.

Madeline was understandably disappointed that she would not see us today and, in lieu of that, requested a FaceTime session.  We were equally disappointed that we would not get to see her (and her parents) but an hour of FaceTime made up for it a bit.  After our FaceTime session we lingered in the living room by the fireplace enjoying our coffee and doodling on our iPads.  We finally got dressed at noon and left for Meghan and Chris’ house at 12:30 PM.

We arrived around 1:15 PM and were greeted by our daughter with a paper grocery bag full of some of our mail.  We had a long, relaxed afternoon to visit and catch up.  Meghan made vegan burgers from scratch and a salad with beans, corn, red bell pepper, and avocado with a lime-based dressing.  We brought a bottle of Barefoot Red Moscato and I found it very much to my taste (sweet).

We departed just after 7 PM and stopped at the new Gas 2 Go station at the northwest corner of I-96 and Latson Road.  The station was still under construction when we left in November.  I was pleased to see that it is a Shell Oil Company station with a Tim Horton’s.  I have had a preference for Shell gasoline for most of my adult life and Tim Horton’s has coffee on a par with Dunkin Donuts, although I do not like the lids they use.  There is also a traffic signal on Latson at the side road for the station, no doubt because this is also the access road for the Livingston County Road Commission complex.  (Leave it to them to take care of themselves while the rest of rest life and limb to get out of the Lowe’s/Walmart center just south of there.)  Whatever the reason, it will slow down traffic exiting I-96 and heading south on Latson Road, making it easier to get out of the Lowe’s/Walmart parking lots.

We were home a little after 8 PM and turned on the TV to watch Grantchester on PBS and Elementary on CBS.  Around 8:40 PM I realized I had missed the SLAARC Information Net which started at 8 PM.  I need to reestablish the habit of tuning in on Sunday evenings, but that time slot competes with some of our favorite programming on PBS.

2016/04/25 (M) Pick Up Sticks

We had a typical start to our day.  After catching the weather on channel 10.2 we were up by 8 AM, had coffee and granola with blueberries and bananas, and used our iPads in the living room with the fireplace turned on.  Our Kitchen Aid mixer broke last year and today Linda was finally ready to replace it.  She decided to get the slightly larger and more powerful model with the crank up mixing bowl as she wants enough power to mix bread dough.  She also wanted it in white to match most of the other kitchen appliances.  To our surprise the white color was more expensive than red or blue but less expensive than some other colors including copper bronze.  She was trying to convince herself that red or blue would be OK but I convinced her to order white.  All of our appliances (and cabinet knobs) are white.  With Amazon Prime it will be here on Wednesday.

The weather forecast was calling for a cold front to move through our area triggering rain, and possibly thunderstorms, starting late in the afternoon and extending through the evening and into the overnight hours.  The grass in most of the yard is not very tall yet, except right in front of the house by the concrete driveway.  The yard is also moist, but not soggy, and we do not expect Keith to be here to cut the grass for the first time this season until sometime next week at the earliest.  The temperature mid-morning was in the low 60’s and was forecast to reach a high of 72.  All-in-all it was an excellent day to pick up sticks around the yard in advance of Keith’s first visit and get the Honda self-propelled lawn mower out and cut the grass in front of the house.

I started my yard cleanup with area around the front berms, raking small branches out of the grass and stacking larger ones on existing brush piles.  While I was working out front a UPS truck showed up with our Max Burton Induction Cooktop and our new Verizon Mi-Fi unit.  I signed for the Mi-Fi and took the packages inside.  Linda used the induction cooker to make some nectar for our hummingbird feeder and also prepared a batch of homemade granola.  She eventually came outside and helped me pick up some of the downed tree limbs in the back yard.  We got the easternmost two acres (2/5ths of our yard) picked fairly well.  We will work on the westernmost three acres another day.

I got the Honda lawnmower out and topped up the tank with fresh fuel.  Small engine Honda equipment is known for starting on the first pull, but my experience is that this is only true when they are new.  No doubt our lawnmower needs to be cleaned up and tuned up, and would start more easily if it was, but I eventually got it started and once it warmed up it ran fine.  I mowed the little bit of the lawn near the house/driveway that looked like it was overdue for a cut.  This is also one of the only parts of the yard anyone really sees if they pull into the driveway.

I had just shut the lawnmower off and was putting it in the garage when the U. S. Mail truck pulled into the driveway.  It was our mail carrier, Michelle, and she had a very large box for us, along with our typical bundle of Monday junk mail.  The box was not very heavy and Linda informed me that it was the 48 rolls of toilet paper she recently ordered.  Well, alrighty then.

It was approaching 1 PM so Linda made salads for our lunch with the leftover bean-corn-tomato salad (that Meghan made yesterday) on top of a bed of mixed greens.  After lunch Linda took her Amateur Extra flash cards outside to study and I focused on getting the new Verizon Jetpack Mi-Fi (Netgear AC791L) assembled and activated.  Assembly consisted of installing the Lithium Ion battery and back cover.  I decided to charge it for a bit while I read the user guide and activation procedure.

When I was fairly certain I had all of the information I needed at my fingertips I called the 877 activation number and keyed in the requested information.  It took a couple of tries to get it right but I finally did.  With the activation completed I turned the device on, looked up the SSID and Password, and connected my iPad to it.  I then entered the relevant information in a new entry in Passwords Plus.

I got a phone call from Gaye Young and chatted with her at some length about RVillage and its relevance to FMCA.  (Gaye is the FMCA National Secretary and chairperson of the National Education Committee.).   She and husband Jerry are at the Rally in the Pasture at FMCA National President Charlie Adcock’s place in Arkansas (or maybe it’s Alabama?) and I knew from talking to Curtis Coleman last week that he was on his way there too.  A year and a half ago the NEC researched and recommended that FMCA partner with RVillage and a year ago the FMCA executive board accepted and endorsed that proposal but then nothing happened.  The FMCA Executive Director was recently let go and Charlie is now trying to get the RVillage train back on the tracks, along with lots of other things as FMCA continues to loose members at an alarming rate.

I suspect that the loss of members is a combination of several factors.  For one, the median age of FMCA members has been in the upper 60’s for quite some time.  That means a certain number of members are “aging out” almost daily.  For another, the downturn in the economy in 2007 was particular hard on the RV industry.  Not only was the industry slow to recover, when it did it was building mostly towables, not motorhomes.  In the past many RV dealers basically “included” an FMCA membership with the purchase of a motorhome, or at least provided information about the Association and an application form.  Another possible factor is that RVers under 50, including Gen-Xers and Millennials, don’t tend to join things.  FMCA is not the only organization suffering membership decline and having difficulty attracting new members, especially younger ones.

Chuck and Barbara got home yesterday and were settled enough for Chuck to call me at 5 PM and update me on their hub oil leak.  Linda made salads for dinner and reheated the brown rice and seitan stroganoff.  After dinner I replied to an e-mail from Gaye and then settled in to watch TV with Linda.  And so it goes.

 

2015/11/21 (S) Not Quite As Planned

Leave a reply

The weather forecast for today had snow moving into the area starting at 4 AM, increasing in intensity by 8 AM, and continuing through the day and into the evening.  The initial forecast was that we would get 4 – 6 inches of accumulation with temperatures hovering just below freezing.  We overslept this morning and did not get up until 7:30 AM but decided to go to our weekly ham radio club breakfast in South Lyon anyway.  I have had Mike’s (W8XH) climbing harness for a while and wanted to return it before we left for the winter.

There was already some accumulation on grassy areas when we left at 7:45 AM but the drive was not a problem and we arrived at 8:10.  We were the last ones there, of course, but someone had to be.  We had a nice chat with Harvey (AC8NO) and Diane, who are usually close to the last to arrive.  I called Mike, who did not make it to breakfast, and let him know I was transferring the harness to Harvey.

On the drive home we stopped at Meijer’s in Brighton so Linda could get some additional ingredients to make more granola.  By the time we got home at 10:30 the snow was starting to pile up.  I had four text messages from Kristine Gullen in quick succession which turned out to be four parts of one message.  She wanted to pin down our dinner plans for this evening.  I texted her back once I got home and after a couple of exchanges we came to the mutual conclusion that the weather was going to interfere with our get-together.  Sadly, that meant we would not see her and Jim again until May 2016 as they were probably headed to Frankenmuth for the Fall MERA conference and then on north to their cottage at Crystal Mountain for the Thanksgiving holiday.

Snow piling up around the bus less than a week before our planned departure for Florida.

Snow piling up around the bus less than a week before our planned departure for Florida.

Our original plan for today was to clean the inside of the motorcoach and then start cleaning up the garage/shop.  With the snow piling up we decided to defer cleaning the rig and concentrate on cleaning up the garage and staging things that we will eventually load on board.  I worked in the garage most of the day although that included moving things into the library and house.  Linda concentrated on making granola, preparing a billing statement for the bakery, and organizing/staging kitchen-related things for the bus.  She also came out and helped me when I needed assistance.

My objective for today was to get one of the temporary workbenches cleared off and disassembled.  I also wanted to get all of unused plywood stored flat.  By 5:30 PM we had accomplished those two goals, gotten most of the power tools put away, moved quite a few things to the library, and stored or thrown away quite a few other things.  I had also managed to strain my lower right back.  That is never a good thing, but it was especially bad given what we have to accomplish in the next three to four days.  We will continue the process tomorrow and I will try to get my tool boxes reorganized before I quit working for the day.  A critical piece of the cleanup will be getting everything that should be protected from freezing out of the garage and into the library as we do not heat the garage while we are away even though it has a furnace.  From there some of it may get moved to the laundry room in the basement, or not; it just depends on time and energy.

We need to clean up the garage enough to get the Honda Civic inside and also the (non-functioning) lawn tractor.  Optionally we can leave the tractor where it is and put a tarp over it or I can borrow Mike’s trailer and take it to Sloan’s in Linden to have it repaired and stored for the winter.  I like the last option best but I doubt that I will have the time to take it there before we leave.  It would have to be on Wednesday, assuming they are even open the day before Thanksgiving.

Snowstorm in progress. Lots of snow on the rear deck and still coming down.

Snowstorm in progress. Lots of snow on the rear deck and still coming down.

For dinner, Linda sautéed an onion with some mushrooms and heated some frozen broccoli and peas.  She used all of that as toppings for two baked potatoes.  We watched the snow fall as we ate and estimated the accumulation on the railing of our rear deck to be at least a foot.

By 7 PM Howell had officially recorded 14.5 inches of snow and it was still coming down.  I decided to text Kerry Fear, who does our snowplowing, to let him know that I staked the driveway yesterday but we still have a mower deck, wheelbarrow, paving blocks, and plastic conduit in the northwest corner of the drive that we have not yet had a chance to remove.  He texted back that he was “up north” and would be back Sunday afternoon.

We went to bed before 9 PM, watched a few minutes of weather on TV, and caught a bit of a Cirque du Soleil holiday show on Detroit PBS.  I was going to call Butch and text Chuck but it was after 10 PM so I went to sleep instead.

 

2015/11/14 (S) Tiling the Cockpit, #1

Leave a reply

I was up at 6:30 AM and got a shower.  Linda got up closer to 7 and we were on our way to our ham radio club breakfast by 7:20; but not before I released two more mice.  Either we have a significant colony living nearby or the same few animals are finding their way back into the house.  We find it hard to believe, however, that if they are returning they would re-enter the trap.

We had a good showing for breakfast, minus a few regulars due to the ham fest in Ft. Wayne, Indiana today and tomorrow.  We were the second two people to arrive so we got to sit across from the other Bruce and Linda.  They are leaving for their new place in Florida before the next breakfast so the next time we see them will be in the Sunshine State.  We had a lot of work to do on the bus this weekend so we did not linger over breakfast and were on our way home by 9:15 AM.

The seat cushions and spacer cushion for the built-in sofa in the bus.

The seat cushions and spacer cushion for the built-in sofa in the bus.

By 10 AM we were working on the floor tile for the front of our motorcoach, which I often refer to here as the “cockpit” as a convenient shorthand.  In a sense the cockpit consists of several sub-areas.  I think of the “entry” as consisting of the stairs and the first landing.  At the same level as the landing is the “driver’s area.”  I sometimes refer to this as the pilot’s seat as most of the controls for operating the bus when it is in motion are located here.  The dashboard, however, extends into the landing area and contains controls for some of the house systems.

One step up from the landing level is the “front passenger seat platform” which I often refer to as  “the platform” as a convenient shorthand.  The portion of the platform closest to the entry door side of the bus is where the front passenger seat is located, which I sometimes refer to as the co-pilot and/or navigator seat.  It’s really not a co-pilot seat as you cannot operate the bus from there, so navigator is really the more appropriate term.  In the center of the platform, and extending towards the driver’s side of the bus, is a step which gets you up to the main floor level.

Because the pilot and navigator seats are on different levels from the main floor those seats are not usable as part of the living room, making the front portion of the interior a distinct and dedicated space with its own character, much like a cockpit in an airplane or ship.  Nonetheless, we used the same fabric on the these two seats as we did on all of the other living room furniture and we are using the same tile on the floors and walls as we used on the main floor.

Bruce uses the heat gun to soften a piece of the floor tile so he can cut it. (Photo by Linda. )

Bruce uses the heat gun to soften a piece of the floor tile so he can cut it. (Photo by Linda. )

We worked from 10 AM until almost 4 PM measuring, cutting, and dry fitting the tiles for the landing and driver’s area.  The driver’s area in particular took a lot of time as every tile had to have something special done to it.  Intricate curves had to be cut to fit around the steering column, brake pedal, and the perimeter of the area and holes had to be drilled for the seat base bolts.  All of this intricate trimming was done by heating the back side of the tiles with a heat gun (much hotter than a hair dryer) and cutting the softened tile with a razor knife.

We quit working for the day at 3:45 PM and changed clothes.  By 4:15 we were on our way to meet John and Diane Rauch at the Livonia 20 Cineplex on Seven Mile Road just west of I-275 for a 5 PM movie.  Ever since Daniel Craig started playing the role of James Bond in the 007 movies we have gone to see them with John and Diane not long after opening day.  After the movie we went to the Macaroni Grill, which is walking distance from the theater on the northeast corner of the intersection of Seven Mile Road and Haggerty Road.

We had to wait awhile for a table but we had plenty to talk about and the time passed quickly enough.  We were seated by 8:20 PM and finally left our table at 10:20.  We started with bread, olive oil, and wine.  We split a two liter bottle of the Chianti house red wine.  It was priced the same as five glasses, but we each had more than two glasses, so it was a good deal.  All four of us had a “make your own pasta” dish with a salad, and each one of us chose a different pasta and add-ins.  I had linguine with a garlic olive oil sauce, mushrooms, tomatoes, and fresh spinach.  Linda had farfalle (bow tie) pasta with arrabiata (spicy tomato) sauce, garlic, mushrooms, and spinach.  Both dishes were well prepared and tasty, and they were vegan!

I stopped at our local Shell station to fill the fuel tank in Linda’s car and it was a little after 11 PM when we got home.  We had another mouse in the trap so I took the trap to woods on the southwest part of our property and released it.  Back inside I went straight to bed.  It had been a long but productive and enjoyable day that ended with too much food and too much wine too late in the evening but we were glad to have had a wonderful conversation with our longest standing Michigan friends.

 

2015/11/07 (S) Measure One, Cut Twice 

Leave a reply

We were all up at 7 AM.  I got dressed and left at 7:25 AM for the SLAARC breakfast in South Lyon.  Linda and Madeline had toaster waffles and fresh berries for breakfast at home.  The main reason I went to breakfast was to talk with Larry (K8UT) about a plug-in for WordPress that he recently found and though I might want to use for the SLAARC website.  He purchased a five site license for the full version of a survey plug-in and was willing to donate one use to the ham radio club.

When I got home at 9:30 AM the girls were getting ready to leave.  Linda’s plan for the morning was to take Madeline to the Howell Public Library.  The library has a very nice play area for younger children and a good selection of children’s books.  Apparently they planned to be gone for a while because they had a bag packed with snacks and other things for an extended outing.  I changed into my work close and when they left I resumed working on the bus.

My first objective was to cut the final piece of SurePly underlayment for the entry landing and area under the driver’s seat.  It was a large and complex piece that took me a long time to lay out even using the piece that goes under the driver’s seat as a template.  When I finally had it cut and drilled with the holes for the seat mounting bolts I took it to the bus to see how it fit.  Unfortunately I could not get it in.  It had to go under something on the front and back and also had to fit around curves and angles, and it just was not physically possible to get it in place in one piece.  It was immediately obvious that I would have to cut the piece into two parts but not so obvious how best to do that.

Linda and Madeline returned about this time (12:30 PM) and I was ready for a break.  They brought in their “haul” from the library—eight books and five videos—and laid it out on the living room coffee table.  The play market that Madeline likes so much had been replaced by a play kitchen.  The librarian told Linda they rotate the playsets every three months to keep it interesting for the children.

After going to the library Linda drove to the Brighton Mill Pond so Madeline could play at the Playscape.  Linda reported that Madeline has figured out how to pump a swing and is able to keep it going once someone helps her get started.  As a special treat they went to the ice cream shop nearby and Ms. M got a scoop of ice cream.  She did not tell me what flavor, but she said it had sprinkles on it.

It was going on 1 PM and seemed like a good time to have lunch, so Linda made hummus sandwiches with sliced onion for us and hummus on bread for Madeline.  She washed off a big bunch of grapes and we all enjoyed some of those too.  After lunch I read one of the library books to Madeline and then Linda read her a different one.  At that point I excused myself and went back to work on the bus.

I pondered the situation with the piece of underlayment and finally saw what appeared to be a natural cut line.  After considering where the tile would go, however, I decided against it.  Unlike the tile on the main floor of the bus, which is installed on the bias, the grouted joint lines in the cockpit/entry are going to run straight fore-and-aft and side-to-side.  I was not sure, however, exactly where they would fall.  I needed to avoid having a grout line fall on a joint between two pieces of underlayment so I ended up cutting the piece that covers the landing at an angle.  This gave me a smaller piece that tucked under the center console on the dashboard and a larger piece that tucked under some metal trim behind the driver’s seat.  I was now able to get both pieces in but they did not fit properly.

I had used my last large piece of SurePly to make the original single piece, and it had taken me hours to do, so I did not want to remake it.  I made any trips between the bus and the garage/shop, trimming a little bit at a time and rechecking the fit, until I finally got the piece to fit correctly.  In the process the piece had changed enough that the smaller piece was now too small and could not be trimmed to fit.  I searched through my scrap pieces of SurePly and found one that was almost big enough to remake the smaller piece, but not quite.

It was now 3:30 PM, and I still had some good daylight to work by, so I secured the floor patch under the driver’s seat.  The patch consisted of a 1/4″ thick layer of SurePly with a 3/4″ thick layer of oak veneered plywood on top of it to make a 1″ thick piece.  The SurePly was screwed to the 3/4″ plywood from underneath.  With the patch in place I installed another piece of 1/4″ SurePly that covered the patch and extended out over the old surrounding wood, which was still sound, and filled in the area once occupied by a 1/2″ thick piece of plywood.  I used 1″ self-drilling screws to secure the top layer of SurePly to the underlying wood, slightly countersinking the heads and pulling the underlying patch up tight while pulling the SurePly down tight to the old wood.  I walked on it and it felt secure.  There will be one more layer of SurePly and a layer of tile before the seat base gets re-installed.  Bolting down the base will obviously pull everything down tight to the structure of the bus if it isn’t already.

Linda and Madeline spent part of the afternoon baking vegan cupcakes.  Linda usually makes chocolate ones but I requested white/vanilla ones this time.  She found a recipe that looked promising and used it.  They needed frosting to finish the cupcakes so they bundled up and went to Meijer’s.  They got back a little before 4 PM, frosting and sprinkles in hand.

I needed more SurePly to continue working, not that I was eager to; I had spent most of the day trying to make one stupid piece of wood and still wasn’t finished.  The temperature had been dropping all afternoon and it was down to 55 in the garage, which was open so I could go back-and-forth to the bus.  I still had the antique SUN distributor tester in my car and determined that I could not get 4’x8′ sheets of material in the car with the machine in there.  Linda and Madeline put on their shoes and coats and came outside so Linda could help me get the tester out of the car.  I then went to Lowe’s.

I had a nice QSO with David (W8DRD) from our ham radio club on the way to Lowe’s.  At the store I was struggling to get the SurePly off of the top of the stack, which was above my head at the limit of my reach.  A customer stopped and helped me which I appreciated.  I needed one sheet to finish the driver/landing area and get the piece I need for the passenger seat platform floor, but I bought two sheets just in case the various scraps I have are not large enough to do the walls of the passenger seat platform.

I was back home by 5 PM and unloaded the two sheets of SurePly.  I put one on the 2x4s across the sawhorses and the other one in the small bay with the other sheet materials.  Linda and Madeline put their shoes and coats on once again and came outside so Linda could help me load the distributor tester back into my car.  Linda said we would eat dinner around 6 PM so I started working on remaking the small piece for the front portion of the landing.

I used the original piece as a pattern for the edges that fit properly but cut it larger than needed for the edge that needed to match the other piece where I cut it into two parts.  After getting it trimmed to fit correctly on three sides I put the larger piece in place overlapping the smaller one and traced the edge on the smaller piece.  I took it back to the garage and used the clamp-on saw guide to get a clean, straight cut.  When I took it back to the bus and set it in place it fit.  Success at last.

By now it was dark and getting close to dinner time.  I decided to leave the securement of this last layer of SurePly until tomorrow when I was refreshed and had better light.  I had hoped to get this landing/driver floor finished today, as well as the floor for the passenger seat platform, but given the difficulties and frustrations of today I felt like I had ended at a good place.  I locked up the bus and closed the garage door on my way in.  I expect tomorrow to be another good day, but then if I didn’t, why would I bother?

I changed out of my work clothes and put on my sweats.  Dinner was vegan cheeseburgers with a vegetable medley on the side and fresh pineapple.  Dessert was vanilla frosted white cupcakes with sprinkles.  After clearing the table I interacted with Madeline while Linda cleaned up a few dishes.  She and Madeline then prepared the baked French toast, which has to sit overnight.  As promised, once all of the stuff was done we went to the basement and watched one of the Daniel Stripped Tiger videos.  When we had seen enough episodes we turned off the TV set and went upstairs.  Madeline got into her pajamas and went to bed.  I put a load of laundry into the washing machine and then settled in to my usual evening routine.  I pulled the laundry out of the dryer at 9:45 PM and we turned in for the night at 10 PM.

 

2015/10/31 (S) Boo!

Leave a reply

We overslept a bit this morning and did not get up until 7:20 AM.  We dressed quickly and drove to breakfast separately as we had to go to separate places afterwards.  We got there at 8 AM and had a nice chat with the folks at our end of the table.  It was a big group this week, at least 24 people, maybe more.

Linda left breakfast at 9:15 AM to meet Diane at Kensington Metropark at 9:30 and go walking.  I lingered at the restaurant until after 9:30.  I drove back to I-96 and Grand River Avenue in Brighton, where I filled my fuel tank at the Shell station, and had a nice QSO with Mike (W8XH) while driving.  I then drove across the street to Brighton Ford to pick up the four spin-on coolant filter/conditioners I ordered yesterday.

Brighton Ford’s parts department is a NAPA outlet but they do not have any signs to that effect as Ford Motor Company won’t allow it.  My next stop was up Grand River Avenue towards Howell at the O’Reilly’s Auto Parts store where I picked up the nine (9) gallons of Chevron Delo 100 SAE 40 engine oil I ordered yesterday morning.  I drove home and chatted a bit more with Mike on the way.  I found out that he gets his Lawn tractor serviced at/by Sloan’s in Linden and is very pleased with them.  He has a trailer for transporting his lawn tractor and is willing to let me borrow it to transport ours when I am ready.

When I got home I unloaded the oil and filters and then emptied the dishwasher, refilled it, and started it.  I then went to my office to work.  I had an e-mail reply from Byron Pigg with information I needed to finish the article for Bus Conversion Magazine (BCM) about his 1985 Model 15 Eagle bus conversion.  I incorporated the new info into the Word docx and then called Byron on the phone.  We spent at least an hour going over the article and chatting about bus conversions.  After we wrapped up our conversation I worked a bit longer on the article making the last few edits and removing blemishes from two of photos.  I uploaded the article (Word docs) and all of the photo files (jpgs) to my BCM Dropbox folder at 2:15 PM and then e-mailed Gary (publisher), Mike (editor), and Jorge (layout).

Shawna gets Madeline into her Bumblebee costume for Halloween Trick-or-Treat in their neighborhood.

Shawna (back to camera) gets Madeline into her Bumblebee costume for Halloween Trick-or-Treat in their neighborhood.

While I was doing all of that Linda firmed up our Halloween plans with our son.  We left the house at 2:45 PM and drove to Ann Arbor, arriving at their house around 3:30.  Shawna got Madeline into her bumblebee costume and Linda gave her a Halloween gift bag with a rag doll, some candy, and a card.  At 4:15 we walked over to a neighbor’s house for a gathering that included snacks/dinner.  We talked to host Laurel’s parents, Tom and Kendra, who were there from San Diego, California.  All of the kids and most of the adults left at 5:15 to go door-to-door trick-or-treating on Granger Street.  Granger was closed off to vehicles for several blocks with policeman at each barricade and there were hundreds of people out and about.  Many of the adults were in costume, some quite elaborate, and it was quite a sight.

Madeline caught on very quickly to her role in all of this and would often walk past other, larger children right to the front of the line to get her treat.  She is just shy of three years old so it was cute.  One of the houses had two large pumpkins out front, appropriately carved.  They were real pumpkins and each weighed about 1,500 pounds when they were delivered by a truck.  Madeline is above average height for her age but these pumpkins towered over her.  The homeowners are well known in the neighborhood for having these giant pumpkins each year and bring in mind-boggling large quantities of candy in crates.  You gotta love neighbors like that.

The rain held off for most of the prime trick-or-treat window from 5 – 6 PM but I was cold and went back to the house a little ahead of everyone else.  It started to drizzle around the same time Madeline’s endurance was waning and they got back to the house at 6:30 with the umbrella deployed.  Madeline was eager to take stock of her Halloween “loot”.  We enjoyed watching her excitement at having different items to choose from and then “negotiating” with her parents over having to select just one item for this evening.  Halloween trick-or-treat is perhaps best appreciated while watching a three year old experience it.

We left around 7 PM and stopped at the nearby Whole Foods Market for soy creamer.  We picked up two bottles of Frey brand wine, a white and a red, and two pieces of vegan cake.  Frey makes organic wines without the use of animal products and are a sponsor of “Cooking School” with Christina Perillo on the PBS Create channel.

I got a call from Joe as we were getting ready to leave Whole Foods.  He was packed and ready to hit the road first thing in the morning.  He wasn’t sure if he would make it all the way to our house on Sunday or finish the trip early Monday morning.

It rained on the drive home and I took the wheel as Linda has a hard time with dark/wet roads.  We were reminded, once again, of the poor condition of Michigan’s roads, many of which need to be repainted and have reflectors installed such as the ones we saw in Florida the winter before last.  (I suspect that the reason Michigan does not use them is because of snow plows, but they really make it safer to drive dark roads at night.)  We got home sometime after 8 PM and had dessert.  I checked the bus for leaks buy did not find any new water.  I texted Joe our address, checked e-mail, and then opened the package from Rockler Woodworking that our postal carrier had delivered earlier in the day.

The maple veneer from Rockler was a bit darker than I had hoped, but it will still be a nice contrast to the walnut trim when suitably finished.  The two shelf brackets were certainly substantial enough but it remains to be seen if the wall of our coach is adequate to support the table without a leg to the floor.  The main issue will be the fasteners near the top which will be in tension and trying to pull out of the wall.  Of secondary concern will be the lower tip of the brackets, which will be in compression, trying to push through the wall and possibly puncturing it.  I may have to use expanding bolts or toggles rather than screws for the upper (tension) fasteners.

We had some hot tea and went to bed.  Although I did not get to work on the bus today I got a lot accomplished and we had a great time watching our younger grand-daughter experience Halloween.

 

2015/10/24 (S) Meghan and Chris

Leave a reply

We drove separately to our SLAARC breakfast in South Lyon as Linda had plans to walk with Diane at Kensington Metropark after breakfast.  We drove through some heavy rain after which I chatted a bit with Tom (W8TAF) and Mike (W8XH).  As always, we enjoyed the breakfast conversation with our fellow amateur radio operators.  Linda left at 9:15 and I lingered until 9:30 enjoying my last cup of coffee.  I paid our check and had just headed for home when Mike (W8XH) called me on the radio.  We had a good chat about my Hi-Q 6-80 mobile HF antenna and will try to find a time to test it using his newer VNWA.  Mike has learned a lot about how to use it in the last couple of years and is always willing to put that knowledge to use to help his fellow ham.  I would love to figure out a way to mount this antenna so we can take it with us this winter and use it, but I doubt that will happen.  We just have too much else that has to get done in the next month that is more important than this.

At home I pulled up the DX Engineering website on my iPad.  I found their Mix 31 snap-on ferrite chokes and put them in my cart.  If I can find a few other small things to buy the order will qualify for free shipping.  I suspect that will not be a problem.

Next I pulled up the Sony alpha app and researched the acronyms they use for various features of their cameras and lenses.  The model numbers for their A-mount lenses all begin with SAL (Sony “A” Lens) and their E-mount lenses all begin with SEL (Sony “E” Lens) so that helps sort those out right up front.  However, they make both 35mm full frame (36mm x 24mm) and APS-C (24mm x 16mm) lenses in both mounting systems.  The FF lenses can be used on APS-C bodies, such as our Sony a100, but the APS-C lenses, which always include the letters “DT” in the product name, cannot generally be used on FF bodies.  Our new Sony SLT-a99v DSLT camera body, however, can detect a DT lens and automatically limits the active portion of the sensor to an APS-C size area.

SAM stands for “Smooth Action Motor” and SSM stands for “SuperSonic wave Motor” both of which are used with certain lenses, especially large telephoto ones, that have their own internal focusing motor.  OSS stands for “Optical Steady Shot.”  Even though the alpha series cameras have image stabilization built into the body some Sony lenses also have image stabilization built into them.

One of the things I was trying to find out is which lenses have distance encoders so they will work with the ADI (Advanced Distance Integration) feature of the a99 body and compatible Sony flash units.  The lens specification table in the alpha app was not really clear on this point.  Some lenses were marked with a small circle for this feature and others with a dash.  If their nomenclature is consistent with other entries the dash means “no”.  Logically then the circle means “yes” but I did not pursue this further.  I will have to experiment with the 18-70mm APS-C format lens that came with the a100 and see if it supports ADI.

I opened the B&H Photo Video app and revisited the reviews on the Sony HVL-60m flash.  Although more expensive than the HVL-43m I added it to my cart.  Besides being more powerful it has an available external battery pack which I found and also put in the cart.  Finally, I added the Cotton Carrier dual camera harness to the cart.  I found my Minolta electric shutter releases and checked to see if they worked with the alpha 99.  They did!, so I did not need to order new ones.  B&H was closed for online order processing until 7:30 PM this evening so I did not submit the order right away.  The Cotton Carrier is on sale until the 26th so I will submit the order tomorrow while the sale price is still valid.

Linda got home at 12:30 PM and we had the last two vegan hotdogs for lunch.  She then started preparing dinner and I went to my office.  I did a load of laundry, dealt with e-mail, checked in with RVillage, and copied photos from both the Sony a100 and the Sony a99 to my computer.  I updated my BCM article spreadsheet and then moved article folders to the proper directories and deleted them from my BCM Dropbox folder.  I added 80 pounds of solar salt to the water softener and then brought the laundry upstairs and hung it up.  By 4:30 PM I was feeling very tired and took a short nap until Meghan and Chris showed up at 5 PM.

We showed them the driveway and bus projects and then went inside the house just as it started to sprinkle.  Everyone selected a beer and we were standing around the kitchen when a brief, but very intense, line of storms moved through our area with heavy rain and strong winds.

For dinner Linda made a salad of dark leafy greens with tomatoes, carrots, mushrooms, and raisins dressed with a raspberry vinaigrette.  The main course was a Farro pilaf with dried cranberries, onions, garlic, broccoli leaves, and slivered almonds.  Yes, broccoli leaves.  The whole broccoli plant is edible but until recently only the flowerets were available in stores.  The side dish was Brussels sprouts cut in half and oven-roasted with salt, pepper, and a little olive oil.  Dessert was pears in wine.  She used the Witch’s Brew, a spiced red wine that was perfect for this dish and this time of year.  After poaching the pears she reduced the wine to a sauce and chilled everything in the refrigerator for hours.  (The pears were made ahead of time as was the Farro, with the main dish being finished just before serving.)

We sat in the living room with the fireplace on and chatted about houses, pets, travel, sports, and the upcoming holidays.  Meghan and Chris stayed until 8:30 PM and then headed home.  It was a nice visit during which both cats actually came out of hiding and allowed themselves to be petted, a rare treat in Jasper’s case.

We were both tired, partly the residual effect of our altered schedule on Wednesday and Thursday, so we finished clearing the table and went to bed.  The Detroit PBS Create channel was featuring vegetarian (including vegan) episodes of various cooking shows so we watched a few of those before turning off the TV and going to sleep.

 

2015/10/17 (S) First Snow

Leave a reply

Last night we removed the dining table from the back of my car and put it on the bed in the bus.  We then removed the two rear seats and put them in the garage.  We wanted the back of the Honda Element empty when we got up this morning as we do not usually have time to spare in the morning before driving to South Lyon for breakfast with the South Lyon Area Amateur Radio Club.

It’s always good to see our fellow hams and today was no exception.  We arrived just before 8 AM and stayed for over an hour.  We left around 9:15 and drove to Chuck’s shop in Novi to get the box with the two remaining lower windshields for our bus.  Chuck was already there and helped us load the box into the car.  The box was sized to hold five windshields but only had two in it so it was light enough for us to move by hand.  I knew it would fit in my car as we had measured it on a previous visit and I had checked the dimensions against the car.  We set one end on the tailgate, lifted the other end, and slid it in.  We chatted for a while, and looked at a project Chuck is working in for new front window shades, before heading home.

Phil was not at our house when we got home but he had obviously been there.  All of the concrete, and many of the rocks and boulders, were gone from the driveway extension area so I presumed he had loaded them in his truck and hauled them away.

The Converted Coach Owners (CCO) Halloween Rally was going on this weekend and today was the main day for activities.  We had intended/hoped to go to the rally but the progress on our bus remodeling has slowed over the last couple of weeks for various reasons, all legitimate, and it was not in a condition to travel or be used.  It’s not that things are not getting done; they are, just not as fast as we would like or need them to.  Among other things I have not yet secured the refrigerator and pantry.  We thought about driving over in the car but it was over two hours one way and we needed to spend what time we had available working on the bus and could not justify being gone.  Thanksgiving does not look/feel that far away anymore.  It also seemed ill-advised to be gone while Phil is here digging up the yard.

My main bus focus for today was completing the installation of the built-in sofa.  We had already set the plywood seat board on a blanket on the bus kitchen floor so I had access to the inside of the base/storage box.  I did not need Linda’s assistance for a while so she worked on her counted cross-stitch project.  Before starting on the sofa, however, I took care of a few other minor things.

First I replaced the alkaline batteries in the TempMinder thermometers with Lithium ones.  I then reset the minimum and maximum temperatures for the two remote sensors.  Sensor #1 monitors the freezer and sensor #2 monitors the fresh food compartment of the bus refrigerator.  The directions for the TempMinder suggest using Lithium batteries if the remote sensors will be in cold environments.

Next I got a piece of scrap SurePly underlayment to see how it would fit in the rabbited wood trim on the lower outside wall of the hallway.  I inserted it fully into a corner and marked the edges with a pencil.  It is approximately 3/16″ thick and fit nicely without being too tight.  With a layer of veneer it should be just right.  When I removed it the depth of the rabbits appeared to be 5/16″ to 3/8″.  I think the underlayment will make a nice base for hardwood veneer.  I will cut the panels 1/2″ wider (22-1/2″) and 1/2″ longer (28″) than the 22″ X 27-1/2″ dimensions of the framed opening and allow them to “float” just like a frame and panel door.

My last mini-task was locating the 1/4″ walnut veneered plywood we removed from the old refrigerator and measuring it to see if we had pieces big enough to panel the damaged area on the wall by the co-pilot seat.  I was pleased to find that the remaining pieces are large enough for this application.

By now it was 12:30 PM and my phone reminded me that we had an RVillage Ambassadors webinar/meeting at 1 PM.  Linda heated up some Amy’s Vegetable Bean Soup and made hot lentil loaf sandwiches with ketchup.  Yum.  We got our first snow flurries of the 2015-16 winter season during lunch and they continued off and on through the afternoon.  We moved to Michigan in May 1976.  It snowed on October 15th that year and we had snow on the ground every day until early April 1977.  While that has not held up over the years as a “typical” southeast Michigan winter it was very different from what we grew up with in Missouri and formed our first and most lasting impression of our adopted state.

I retrieved the link for the Go To Meeting from the RVillage website and put it in my web browser.  1 PM came and went with no meeting.  The meeting notice said “Saturday, October 17 at 10 AM PST” but they had clarified that was actually 10 AM PDT, which is 1 PM EDT.  We decided that perhaps they really meant PST, which would be 2 PM our time.  We tried again an hour later, but no meeting ever commenced.

When I finally got to work in the bus on the sofa I removed six screws, three each from two angle brackets, and pulled the entire base assembly out from the wall, giving me complete access to the HVAC duct and wiring chase.  Much of the final installation of the sofa involved this duct.

Powered and manual sheet metal nibblers with the opening Bruce just cut in the OTR HVAC duct and the piece of sheet metal that was removed.

Powered and manual sheet metal nibblers with the opening Bruce just cut in the OTR HVAC duct and the piece of sheet metal that was removed.

The ends of the plywood seat rest on two boxes with open ends that also serve as plenums for air from the OTR HVAC system ducts.  I needed to cut out rectangular openings in the vertical face of the duct to allow air into the back end of these boxes.  I used a 1/2″ drill to create starter holes at the corners of the openings and then used a manual sheet metal nibbler and a drill-powered reciprocating nibbler, both of which I borrowed from Chuck a few weeks ago, to cut out the sheet metal.  The two tools work differently but they both worked well and I was glad I had both of them for this task.  The powered nibbler created a lot of small metal debris so I vacuumed the whole work area very thoroughly when I was done nibbling.

The right (forward) end of the duct also had an extra hole in it where I did not need or want one.  I removed an old sheet metal patch plate and cut a new one to cover the area I needed to close off.  I ended up having to pre-drill holes as I spun the heads off two of my cheap sheet metal screws.  I had a heck of a time getting the shafts out, but I got it done.  This was just one more example of why seemingly simple projects always take longer than they should.

Phil returned while I was working on the sofa and continued trenching in the French drain.  I stopped to chat with him briefly and Linda came out to let me know she was headed to the grocery store.  I then got back to my own tasks and let Phil get back to his.

The left support/plenum box with the circular register hole cut in the face plate.

The left support/plenum box with the circular register hole cut in the face plate.

The open fronts of the two plenum boxes are attached to the inside of the vertical front support, which is 3/4″ walnut veneered plywood.  To get the air out of the boxes and into the coach my design called for brown plastic 4″ round louvered diffusers.  They are considered “four inch” because the two inch long cylindrical pipe on the back will just fit through a 4″ diameter circular hole.  (A 4″ flexible duct, like dryer duct, will also just fit over the pipe.)  The visible part of the diffuser is actually 5-1/2″ in diameter.

The inside width of the plenum boxes is 4-1/4″ by design.  I needed to center a 4″ hole within that space so I had to locate the center point for my 4″ hole saw very accurately side-to-side.  I also wanted the hole centered vertically.  Using my small square I marked the vertical midpoint on the edge of the front plywood at each end.  I then measured in 2-13/16″ from the midpoint mark and used my spring-loaded center punch to mark the center of the hole.   [The 2-13/16″ dimension came from half the inside width, or 2-1/8″, plus the thickness of the plywood used to make the plenums, or 11/16″.]

A close up view of the nylon mesh screen material used to cover the opening in the HVAC duct to keep critters that might get into the duct from getting into the support/plenum box.

A close up view of the nylon mesh screen material used to cover the opening in the HVAC duct to keep critters that might get into the duct from getting into the support/plenum box.

I stood the boxes on their back ends so the front board was horizontal.  I straddled the front board with my legs to hold it and drilled starter holes with a #6 countersink bit.  I then drilled the 4″ holes with a 4″ hole saw using my 1/2″ Craftsman corded drill, being careful to have the pilot bit in the starter holes and drill perpendicular to the face of the plywood.  I have had this drill for 37 years.  It is very powerful and has several ways it can be gripped quite securely.  It is large, heavy, and lacks the convenience of a cordless drill but when I need to use a bit with a 1/2″ shaft and/or need the torque, this is still the drill for the job.  The hole saw created some sawdust so I vacuumed the whole area thoroughly when I was done drilling.

I was just finishing this work when Linda got back from the grocery store.  She put the groceries away and came out to see if I needed any assistance.  I already had the roll of plastic screen in the bus and she got the Gorilla Tape from the garage.  I cut pieces of the screen large enough to cover the two rectangular openings in the HVAC duct and used lengths of Gorilla Tape to secure them.  We then slid the base/storage assembly back into position, pushed it tight to the HVAC duct, and reattached it to the wood wire chase on top of the duct.  The two support boxes and the return air box have foam weather stripping on the back edges to seal against the duct.

We picked the plywood seat up off of the kitchen floor and set it back in place but did not secure it.  We left it out several inches from its original position and got a seat and back cushion from the bedroom.  We experimented with different spacings and finally agreed that we need to have the seat out 4-3/4″ farther than originally designed.  The current hinge board is 11/16″ plywood, 2-3/4″ wide by just under 78″ long.  This board is screwed to the top of the wiring chase and to one side of the 72″ piano hinge.  I will replace it with a piece that is 7-1/2″ wide by the same length.  I will also have to provide some additional support for the seat side of the piano hinge as in the original design had both sides of the hinge resting on top of the wiring chase on top of the HVAC duct.

The Tulip Tree behind our house in its full fall glory. This is the first photo to be posted in this blog taken with the new Sony a99v DSLT camera.

The Tulip Tree behind our house in its full fall glory. This is the first photo to be posted in this blog taken with the new Sony a99v DSLT camera.

That was the end of the interior bus work for today.  By the time we were done Phil had driven his front-loader onto his flat-bed trailer and secured it so it appeared he was wrapping up for the day.  I chatted with him about the project for 30 minutes before he left.  Earlier in the afternoon I had found my site plan drawings for the bus barn and agreed to stake out the driveway tomorrow so we could review it first thing Monday morning.

Linda had invited Meghan and Chris for brunch tomorrow but it was not a good weekend for them as the Michigan vs Michigan State football game was taking place in Ann Arbor.  Chris manages the Pizza House restaurant, and being away on football Saturday is not an option.  They will come next Sunday (31st) instead.

For dinner Linda made a nice salad of mixed greens with dried cranberries, sliced almonds, and diced onions dressed with raspberry vinaigrette.  The main course was pan-fried polenta with vegan puttanesca sauce.  It held its heat to the last bite and was very satisfying on a cold evening.  I opened a bottle of Cupcake Black Forest red wine.  We have had it before and, although drier than I prefer, it went well with the meal.

After dinner I got my flashlight and checked the bus for axle/hub seal leaks by looking under the bus from the opposite side to see the inside of the wheels.  I did not see anything to suggest a problem on any of the six positions and will text that information to Joe tomorrow for planning purposes as he would require a second day to work on the seals if that was needed.

We spent the last couple of hours of the day in the living room, with the fireplace turned on, reading, writing, and playing games while enjoying some red grapes for dessert.  Linda got a text from her sister-in-law, Mary, with a photo of her and Ron “standing on ‘the’ corner in Winslow, Arizona.”  Ron has been retired for many years but Mary only recently retired and they are on their first extended camping trip in their A-liner trailer and their first trip to the southwest U.S.

We went to bed around 10 PM.  Linda fell asleep quickly while I divided my attention between cooking shows on the Detroit PBS Create channel, a concert by Eric Clapton on PBS, and working on this post.

 

2015/09/26 (S) A Step in the Right Direction

Leave a reply

We missed our ham radio club breakfast last week because we were at an RV rally and we plan to be at another rally three weekends from now so in spite of all the work we still have to do on the bus we went to breakfast in South Lyon.  After breakfast we went to the Lowe’s in New Hudson, which is close to South Lyon, and bought a Porter-Cable 1/4 sheet palm sander.  The sander is small enough to get into corners but has an integral dust collection bag.  The bag can be removed for sanding in really tight spots, but it cuts down on airborne dust while sanding and reduces the amount of cleanup afterwards.  We have several other Porter-Cable power tools and I am generally pleased with them.

Back at the house we took care of a few chores and then got to work on the bus.  Linda continued working on stripping the old wallpaper behind the sofa while I pondered for a while about what to do before deciding to concentrate on rebuilding the landing at the top of the entry stairs.  This landing is where the pneumatic entry stairwell slide cover was installed.  Without all of that “stuff” in place the last step up to the landing was now too short and the step up to the copilot level was too tall.  More importantly, the step heights were all different, and would be a built in trip hazard if not corrected.

I determined that the 2.5″ wide poplar boards installed on edge with a 3/4″ thick plywood floor and a top layer of 3/16″ SurePly underlayment would match the top surface of the plywood in the driver’s area.  That would (should), in turn, allow me to install the new vinyl floor tiles so they bridge that seam.  I will have to reuse the plywood in the driver’s area, but worst case that will require using adhesive remover followed by floor patching compound and sanding before installing the tiles.

The landing was not “square” (of course) so I made and rechecked measurements several times.  I then built a four-sided frame that fit snugly and had the front board aligned with the face of the plastic riser.  I am going to tile the steps and I am not going to use underlayment so I needed these surfaces as aligned and flat as possible.  I will probably use floor patching compound, however, to fill the gaps before installing the tile.  I used screws to secure the frame to the adjacent vertical wood that forms the riser to the copilot level and to the base of the landing with angle brackets.

I needed a piece of 3/4″ plywood approximately 31-1/8″ x 27-5/8″ for the new landing as the old piece I took out was not in good shape and I did not want to reuse it.  I did not have any other 3/4″ plywood pieces that were large enough so I went to Lowe’s.  They did not have 3/4″ half sheets (4′ x 4′) but I bought some more angle brackets while I was there.  I then went to The Home Depot.  They also did not have 3/4″ half sheets, but they had full sheets of 23/32″ sanded plywood that looked like it would work and a nice panel saw with an employee available to operate it.  I waited while he built a complete set of closet shelving for a couple and engaged in some domestic counseling.  He then cut the plywood sheet into two 4′ x 4′ pieces and helped me load them into a cart.  I was able to get them into my Honda Element by myself and close the back hatches.  I had a nice QSO with Steve (N8AR) on the drive home via the South Lyon 2m amateur radio repeater.

Linda had long since finished working on the wallpaper and busied herself in the kitchen preparing collard greens Cole slaw and vegan potato salad.  It was somewhere between late afternoon and early evening but I still had enough light to work outside.  Linda was still busy cooking so I decided to go ahead and try to cut the plywood for the new landing.  Again, it was not a rectangle, i.e., an equiangular quadrilateral (four right angles and four sides with opposing sides parallel and equal in length) so getting the shape exactly right was tricky.

I determined that the right front corner, as viewed from the entry steps, was a right angle, or close enough to one to provide a known starting point.  I put the plywood on 2″x4″s on the flat in the driveway to elevate them so I could clamp a saw guide in place and provide clearance for the saw blade.  I measured the lengths of all four edges as best I could and placed the right front corner at a factory corner of one of the 4′ x 4′ pieces.  I marked the length of the right side and the front on the two factory edges.  The left side was longer than the right side and the rear side was longer than the front side so I marked arcs for the left and rear lengths and found their point of intersection.  If the right front corner was, in fact, a right angle them this had to result in the correct shape.  The key word in that last sentence is “if.”

I tried to confirm my layout by measuring the lengths of the diagonals on the plywood and on the bus but I could not get accurate measurements in the bus.  I triple-checked my measurements and layout then marked the guide lines for the setback on my circular saw; 6-5/8″ to the inside edge of the teeth on the blade.  Truth be told I initially marked the guide lines on the wrong side of the cut.  I started to adjust my guide board to the outside of the blade and then thought better of the idea.  The guide needed to be set up so that if the blade wandered off course it would cut into waste material rather than the finished piece.  I re-measured and marked the guide lines in the proper place, checked their location with my small square, checked with the saw, made minor adjustments, and finally made the first of two cuts.  I then repeated all of that and made the second cut.  When I set the piece in place in the bus it was a perfect fit.  I was so pleased that I had Linda come out to see it.  Sometimes I amaze even myself.

I like to quit on a high note so that was the end of our bus work for today.  We did not make dramatic progress but we kept moving and got things done that needed doing.  My work today involved a certain amount of pondering and on-the-fly engineering combined with careful, repeated measuring and accurate cutting.  This kind of work is never fast.

A beautiful sunset had developed, which meant it was getting dark, so I put a few things away and closed up the bus while Linda prepared our dinner.  She made a nice salad and heated a couple of Amy’s vegan (non-dairy) lasagna entrées.  A glass of Moscato was a welcome accompaniment and we enjoyed a second glass as we relaxed in the living room.  We got a Rockler catalog in the mail today so I looked through that.  If you are into woodworking it’s the adult equivalent of the Sear’s Christmas catalogs of yesteryear.

I called Butch at 10 PM.  It was 7 PM in Bouse, Arizona and I figured they would be done working for the day and probably already had their dinner.  The daytime highs there have been reaching 110 degrees F so Butch and the other RV Park employees have been starting work between 6 and 7 AM and trying to finish up by 1 PM.  He did not elaborate but said the situation the first two weeks has not been exactly what they signed up for.  He had already responded to an e-mail from Linda with more details so we let it go at that and talked about other things.  We wrapped up our conversation at 10:30 and I went to bed.  I was going to play a couple of games and then go to sleep but there was an update available for the iPad OS so I installed it.  9.0.1 was a big update and took quite a while to install.  I was very sleepy by the time it finished and turned out the lights.

 

2015/08/29 (S) Up and Down

Leave a reply

When we arrived at the South Lyon Senate Coney Island just before 8 AM there were only five other SLAARC members there but we had 16 by the time the last two people showed up.  Linda (K8LMF) got to sit next to Linda (NF8C) for the first time in quite a while and they had a long chat.  All but one person stayed until 9:45 when we got up to leave and everyone else followed suit.

We were back home by 10:15 AM, changed into our work clothes, and got back to work on the bus remodeling project.  It was a very overcast and cloudy day with a high probability of rain that was forecast to be an all-day event.  That altered our plans a little in that we did not want the pieces of underlayment to get wet and our air-compressor could not be out in the rain as it has an electric motor.

Yesterday we marked and cut the underlayment panels in the driveway, laying them across 2x4s to create space for the circular saw blade.  In order to keep the project moving forward we decided to use the temporary “workbench” in the garage for this work.  Since the workbench was covered with drawer fronts that had to be moved we decided to take a little time to put the new handles on them and reattach them to the drawer boxes.  Sometimes it’s true that “there’s no time like the present” to get something done.

Linda has worked hard on cleaning and waxing the walnut drawer fronts and fixed cabinetry in our motorcoach.  The results so far are amazing and we are feeling like all of our work will be worthwhile as the interior of the coach is going to look very nice when we are done with this project.

We had cut the piece of underlayment for part of the hallway last night but needed to trim it to get it to fit correctly.  I think we took it out of, and back into, the bus at least four times, each trip requiring us to go up and down the seven steps in the entryway/cockpit plus the stool outside the door.  I do not know how many times we went up and down those steps today but it was a quite a few.  To add to our enjoyment and bus conversion physical fitness program we were usually carrying something and it was often heavy and/or large.

The next pieces of underlayment to be cut would fill out most of the living room.  I had planned to cut them a certain way but changed my mind after talking it through with Linda.  We took measurements and I made drawings that were close to scale.  We ended up using the full 48″ width of a 4’x8′ sheet and about 86″ of its length for the piece that fills the alcove where the built-in sofa and storage base will go.  It had two large corner cutouts, one to make it fit with two other installed pieces and the other to go around the base of the media cabinet that doubles as an end table for the forward end of the sofa.  After test fitting it we had to trim a couple inches off of a back corner because of a wire bundle and create a notch for several wires that ran through the floor just in front of the driver’s side HVAC chase.  We waited for a lull in the rain and took it back into the coach.

It fit just right but unfortunately there were defects in the subfloor, such as small gouges and depressed screw heads, that needed to be repaired.  Since we could not use the air-stapler today I did not have a good excuse for not patching the floor correctly so I worked on that while Linda resumed working on the woodwork.  The quart of “ready to use” floor patch was not as ready to use as I would have liked.  The directions said to stir thoroughly and when I opened the container there was a half inch of milky white liquid on top of somewhat drier and stiffer material with the consistency of fine wet sand.  The directions also said the open (working) time was about 15 minutes.

I set the timer on the microwave for 20 minutes, spent five of those trying to stir and mix the floor patch ingredients, and then tried to patch everything that really needed it in the allotted time.  I did not care for this material and wish I had used the Universal Patch and Skimcoat that I used everywhere else.  It was gritty and did not feather out or finish as smoothly as I wanted, but there was nothing to do now but wait for it to dry which would take three hours.

Linda decided to work in the house and eventually fix dinner while I worked in the bedroom (of the bus) trying to remove very old masking tape from the subfloor using a 1.25″ putty knife.  After an hour I had about half of it off but called it quits as my hands were sore.

For dinner Linda cooked a couple of ears of corn-on-the-cob, heated some vegetarian (vegan) baked beans, and cooked two vegan “burgers” topped with vegan cheese.  Mustard, ketchup, pickle relish, and four large leaves of romaine lettuce made for a tasty sandwich.  We each had a glass of the Cupcake Black Forest Decadent Red wine with the meal.  Dessert was fresh sliced strawberries with non-dairy (vegan) peach mango “yogurt.”  It was a tasty summertime meal.

After dinner I tried sanding the floor patches even though the directions said not to sand the dried material.  I used a very old piece of 120 grit sandpaper in my orbital sander and went over the entire area.  I vacuumed the whole area but I could still feel a residual grit on the floor.  I got Linda’s vacuum from the house and tried that.  I then got the Revel wet/dry mop and tried wet moping the area, but it was still gritty.  I was preparing to go over the entire area with the new 80 grit sandpaper but Linda managed to get it clean using the brush attachment on the house vacuum cleaner.

With the area cleaned up we put the piece of underlayment for the sofa nook in place and it fit very nicely but we did not staple it.  We redid our measurements for the passenger side front piece and made some minor adjustments to the dimensions on the drawing.  What I have tried to do wherever possible is to keep at least two factory edges with a common vertex (corner) and use that point and those sides as the basis for my measurements.

It looked like heavy rain was going to hit us from the west but must have tracked north of us.  We continued to get rain, off and on, but nothing heavy every materialized.  Working in the garage we measured and cut the last piece for today.  We made extensive use of the circular saw running it along a saw guide.  By the time we had the sheet cut there was a lull in the rain so we took it to the bus to test fit it.  The fit was close but needed minor trimming in the front outside corner.  By now it was 8:30 PM and we did not want to haul the sheet back out of the bus and into the garage to work on it.  That will be our first task tomorrow followed by stapling the three pieces that we cut today, weather permitting.

We turned in at 10 PM.  There wasn’t anything on TV that interested us, so Linda read for few minutes before falling asleep and I wrote until 11:30.

 

2015/08/22 (S) Clean and Level

Leave a reply

We arrived at the SLAARC breakfast just before 8 AM.  We took the last two seats at the end of the long row of tables, but had to add another one as six more people came in after us.  We had a lively chat that lasted until almost 9:30.  After breakfast we stopped at the Tractor Supply Company store in New Hudson to get a couple more deer blocks and then headed for home.

We took a few minutes to put away tools and straighten up the garage enough that we could set up a work surface for Linda to use for cleaning the walnut drawer fronts for all of the bus drawers.  We set up the two sawhorses we got at Lowe’s yesterday, set two 8-foot 2x4s in the provided grooves, and set a 4’x8′ piece of 2″ rigid foam insulation across them to use as the work surface.  I found an old package of 4/0 steel wool and Linda found some old terry cloth towels.

Foam insulation work surface in garage with walnut drawer fronts laid out for cleaning with Touch of Oranges.

Foam insulation work surface in garage with walnut drawer fronts laid out for cleaning with Touch of Oranges.

Linda removed the drawer fronts from seven of the drawer boxes and tagged them so they could be reunited later as each front is uniquely paired with its box.  She then removed the handles from the drawer fronts and set them aside as they will be replaced with new ones once the cleaning is done.  She started with the back sides of the drawer fronts.  Following the directions she sprayed them liberally with Touch of Oranges wood cleaner, let them sit for 10 minutes, sprayed them again lightly, and rubbed them with the 4/0 steel wool.  She then wiped them off with a terry cloth towel and applied Touch of Beeswax using 4/0 steel wool, always working with the grain, of course.  The wax will have at least 24 hours to soak in before being wiped off.  Once that is done she will flip them over and repeat the process on the front side.

While Linda was doing all of that I hauled the 15 gallon DeWalt portable air compressor out by the bus, plugged it in, and connected the air hose.  I used the 4″ circular pneumatic sander on a few remaining high spots and decided I was done with it.  I had found some old packs of 80 grit half sheets and tried using them on my orbital sander but the grit disappeared very quickly and the sheets snagged and tore on splinters in the plywood.  I spent more time changing sheets than I did sanding with them so I abandoned this approach after the fifth sheet.  I did, however, find a half dozen splintered areas and prepared those by making stop cuts with a utility knife and then peeling the splinter free with a putty knife, creating voids that will be filled with leveling compound.

I was tired of sanding and was clearly not going to get the floor back down to bare wood.  I decided that the floor was as sanded and smooth as it was going to get and it was time to move to the next process; patching and leveling.  Before I could do that, however, I needed to clean the coach.  I vacuumed the floor three times and vacuumed all of the woodwork and wallpaper.  As I worked from the bedroom forward Linda followed behind with a microfiber cloth wiping down all of the woodwork.

I assembled the tools I needed to apply the Universal Patch and Skimcoat; a 3″ putty knife, a 5″ putty knife, a combination smooth and toothed rectangular trowel, a mixing bucket, and a 2 foot long wooden stir stick and a mixing paddle designed to go in a drill.  Each bag of UPS weighs 7 pounds and gets mixed with 1.75 quarts of water, which works out to 1 part water to 2 parts UPS.

The directions on the bag indicated that a full bag of UPS, properly mixed, would cover 20 to 25 square feet 1/8″ thick.  That’s only a 5’x5′ area, but I only had a few gouges that were 1/8″ deep, so an entire bag was going to cover a lot more than 25 square feet when applied as a skim coat.  Not having worked with this material before I had no idea how much working time I would have so I decided to mix half a bag.  The recommended mixing method using a paddle in an electric drill turned out to be a bad idea so used the 2-foot long wooden stir stick to mix the compound.

TEC Universal Patch and Skimcoat applied to the floor in that hallway.

TEC Universal Patch and Skimcoat applied to the floor in that hallway.

I started in the bathroom patching small depressions and then working out from the baseboards.  By the time I got out into the hallway I had not even used half the compound and it was starting to set up.  I hurried to use as much of it as I could, and tried adding a little extra water to extend its workability, but was only able to use about 60% of it before it was too stiff to spread and trowel off smoothly.  I could have waited 1 hour and then mixed and applied more compound but I did not want to risk disturbing what I had already done and it has to set for 24 hours before I can sand it, which I will have to do.

Cleanup required warm soapy water for the tools.  I then poured it into the 5 gallon compound bucket, topped it up with water, stirred it to dissolve the compound as much as possible, and let it sit.

For dinner Linda made Farro with mushrooms, onions garlic, glazed snow peas, and grated carrots.  She needed some dry white wine for the Farro dish and opened a bottle of Pinot Grigio, so we had a glass with the meal.  As rule if a wine is used in a dish it is also a good choice to drink with that meal.

After dinner I went to Lowe’s and got some more 4/0 steel wool and some 80 grit sandpaper sheets.  I stopped at O’Reilly’s for a battery disconnect switch for the lawn tractor but they did not have one.  I tried the Howell Tractor Supply Company but they did not have one either.  I drove to the Brighton Shell station, topped off the fuel in the Element, and went home.  We turned in at 9 PM and watched a 007 movie before going to sleep.

 

2015/08/15 (S) Steve and Karen

Leave a reply

As we were backing out of the driveway to go to our weekly ham radio breakfast we noticed a large mailbox sitting on the ground next to ours.  It was still attached to the upper half of its wood support structure.  The number was 593, which is not an address that occurs on our street.  We left it there and went to breakfast.

We had a mid-sized group of 15 people at our SLAARC breakfast this morning.  On the drive into breakfast we lost power to our GPS every time I transmitted on the 2m ham band.  The GPS and cellular booster worked fine all day yesterday with the new 12VDC extension splitter, but I did not use the mobile ham radio.

After breakfast we went directly to Chuck’s shop in Novi to see if we could retrieve the old refrigerator using our car.  A measuring tape quickly revealed that the fridge would not fit without removing the seats.  Even then it would be too long to close the rear gate and hatch on the Element.  At breakfast Harvey (AC8NO) offered the use of his van and labor to help move the fridge and I will probably take him up on it.

On the drive home I chatted with John (NU8M) on the South Lyon 2m repeater and we were joined by Mike (W8XH).  After John signed and dropped off Linda tried different combinations of power connections while I talked with Mike.  Based on that test the splitter appears to be the problem but we could not determine if it was a voltage drop issue or some form of RFI.

I stopped on the way home to fill the gas tank in my car.  When we got home I put the mailbox in the back of my car and we drove to the end of the street but it clearly did not come from one of our neighbor’s yards.  When we got back to the house we also noticed that there was a footprint on the side of our mailbox.  Closer inspection revealed that the post was slightly loose in the ground and the box was leaning (bent) slightly to one side.  Clearly someone had tried to kick it over (and failed) and there was a very high probability that it was the same person(s) who probably broke the other mailbox and left it on the ground next to ours.  We discussed whether we should report it to the Livingston County Sheriff Department but did not take the time right then to do so.

Linda needed to make a grocery store run and then prep the food for dinner and pick up the house.  With company coming later I did not want to get all sweaty working in the bus and garage so I worked in my office editing and uploading blog posts.  I quit around 3:30 and was writing blog posts when Steve and Karen Limkemann arrived at 4 PM.

We always have a nice visit with Steve and Karen and they are good sports about eating the vegan food that Linda prepares.  Linda made a sweet and sour collard greens cole slaw and vegan potato salad ahead of time.  She cooked corn-on-the-cob on the stovetop and heated vegan beer brats on the grill along with onions and green peppers.  Steve and Karen brought a Malbec wine which we enjoyed before, during and after the meal.  Dessert was fresh strawberries with cashew milk snickerdoodle ice cream.  Really, what’s not to like?

Steve and Karen have rented a house trailer in a trailer park near Venice, Florida for the last few winters.  I think they rented it for January, February, and March and split the time with another couple, but I may not have my facts completely straight.  The owners of the trailer are from England and decided after this last winter that they want to start using it during the winter so Steve and Karen lost the use of it.  They really liked the park and its location so they bought a trailer that was for sale and already set up.  We visited them two winters ago, but we were several hours north of them.  This coming winter we will be much closer to them while we are in Arcadia during January and February and plan to see them more often.  Venice is a very upscale place and there is an excellent vegan restaurant within easy walking distance (a mile) from their trailer park.

We talked about trying to catch the tail end of the Perseids Meteor Shower but the peak was earlier in the week, they would not be visible at our location until midnight, and then only low in the northeast sky, which is not an ideal viewing direction from our yard.  Steve and Karen had a 45 minute drive to get home and left around 10:30 PM.  By that point it had been a long but very satisfying day for us and we were straight away to bed once they were safely on their way.

 

2015/08/08 (S) A New Bus Fridge (Finally)

Leave a reply

We overslept and did not get up until 7:15 AM.  The weather has been very pleasant all this past week but we awoke to light rain.  We left for our SLAARC breakfast at 7:25 AM and took a different route than usual to see how it would be for the bus.  I headed north on Hacker to M-59, east to US-23, and south to I-96 east.  The ramp from US-23 south to I-96 east is a left exit, left entrance, with a very short merge lane in the middle of a major construction project.  I decided that was not our best option for the bus.

We arrived at breakfast at 8 AM to find a dozen people already there but at least 10 more showed up after us.  We enjoyed the conversation, as we usually do, but did not linger and were on our way back home by 9:15 AM.  As soon as we arrived we changed into our work clothes and got busy with the final preparations to move the bus to Chuck’s bus garage in Novi.

I pulled the bus out at 10:30 AM and Linda followed in the Element, which had all of the pieces we had removed from the old refrigerator along with tools, blankets, and some 2x4s.  The bus roof was brushed by a few small, low branches getting from our house to N. Hacker Road, reminding me that I need to covertly trim trees and bushes along our street.  I say covertly because they are not on our property.  The last time I took the bus out we went south on Hacker to Grand River Avenue.  This would have been our preferred route today except that the trees are not trimmed up in a few places and one of them, just before Bendix Drive, clunked the stuff on our roof pretty hard last time.  I did not care to repeat that so I went north as we had this morning in the car.

At M-59 I headed west to Latson Road, a trip of some four to five miles in the wrong direction.  The reason is that Latson Road going south has a relatively new, and easy to navigate, intersection with I-96.  From there we had an easy run to the Beck Road exit, a short jog south to Grand River Avenue, an easy left turn, and the final mile to Chuck’s shop where we arrived at 11 AM.

Chuck had already pulled his bus out of the building and parked it out of the way but there were several trucks and a dumpster trailer blocking access to his door.  They belonged to a motley crew that the owner of the building in front of Chuck’s shop had hired to clean up some of the mess left behind by the sunroom company that just moved out of the building.  He had me pull up to the right and position myself to back up and then negotiated with the workers to move their vehicles.  I pulled up the tag axles and waited.  The workers were not happy about it but they did it.

To get our bus into Chuck’s shop nose first he had me back parallel to the building and then bring it around to the passenger side into a space adjacent to the front building until I was perpendicular to his door.  I was then able to pull straight in but I did not pull in all the way.  Chuck had me stop with the fixed window frame opposite his forklift which he had already positioned for use.  The on again, off again light rain was not a factor as the window frame we needed to open was well inside his shop.

Linda and I unloaded all of the stuff from the car and brought it inside the shop.  We realized that we forgot to bring the camera so Linda tried to capture the progress of the work with her cell phone camera.  I have put those images in a separate gallery post for this date.

Randy, the owner of the Printology business in the suite adjacent to Chuck’s, came over to see what we were up to and stuck around to help.  With me working from an 8 foot step ladder outside the bus, while Chuck and Linda worked inside, we opened the window frame about 24 inches and propped it with a piece of 2×4.  I then carefully lifted the window higher while Linda sighted along the bottom of the upper cabinet.  When I had the frame high enough to be clear of the cabinet Chuck measured the length of 2×4 we would need to prop it open.

It looked like 52 inches would do the trick.  I had a 56″ piece of 2×4 so I cut it down to 52″ with my 7-1/4″ Rockwell circular saw.  I used the first piece to mark a second piece on an 8 foot 2×4 and cut that.  Linda took both pieces inside the bus where she handled one and Chuck handled the other.  As I lifted the bottom edge of the window from outside the bus the window hinge (at the top) made some unpleasant (and a bit unnerving) sounds but I got it high enough that they could put the two braces in place and the frame did not come unhinged.  We had just finished this task when John Rauch and his son, John, arrived at noon to help move the refrigerators.

The old refrigerator was lying face down in the bus.  The two Johns lifted it as a test and determined that they would not have any difficulty moving it.  Linda fetched one of the blankets and dropped it over the sill of the open window to protect it and the side of the coach.  Chuck had placed the long forks on his forklift about two feet apart and slid a narrow pallet over them.  He raised the forks and brought the forklift forward towards the bus.  We got him to position the top of the pallet even with the top of the sill and about 3″ away from the side of the coach.

John and John are very strong and were able to lift the old refrigerator case and pass it through the window onto the pallet.  With a person on ladders on either side of the pallet we slid the refrigerator all the way out.  Chuck then tilted the forks slightly, slowly backed away, and lowered it down.  John and John got the old refrigerator off the pallet, carried it out of the way, and stood it upright on its base.  They then lifted the new refrigerator onto its back, picked it up, and placed it on the pallet.  They went back inside the bus while Chuck brought the forklift up to the coach and raised the forks until the pallet was at window sill level.  John and John slid it into the bus, stood it up, and rolled it into the alcove.  I then secured it in place with a piece of 1×3 wood screwed to the floor across the front to keep it from rolling out while driving.  There is approximately three inches of space above the fridge but it cannot tilt out very far before the upper back edge catches the ceiling of the alcove.

John, John, and Chuck raised the window frame slightly to remove the 2x4s and close the frame when the top hinge started coming apart.  Linda yelled for me and I scrambled over to get another pair of hands on the frame.  With me and Chuck holding the outside (free) edge and the two Johns holding the hinge edge I was able to see where the hinge was out and direct folks as to what to do.  It took several tries and a few minutes (that seemed like hours) but we got the hinge re-engaged and then closed the window frame.  We took a few minutes to rest and chat and Chuck showed John (the father) his race car.   The heavy lifting was all done so John, John, and Randy took off, but before they did Linda gave John (the son) a gift for their new baby girl, Lucy Violet.

Linda and I put all the shelves and bins in the new refrigerator and then reattached the two doors.  That was a bit of extra work as it came with the hinges on the right side but we needed the door to open on the right side.  With the doors on we took a moment to consider our choice of size and color (black) and felt we had made the right decision.  We started to reassemble the old refrigerator but we were all hungry and decided to go to lunch first.  I started the bus and pulled it all the way into the shop so we could close up.  Chuck then drove us down the street to Panera for lunch.  We took our time and had a nice meal and a nice chat.

Back at the shop we decided to switch the buses around so Chuck would be free to leave.  He wanted a picture of the two buses together so I backed ours out of his shop, swung around to the passenger side, got parallel to his bus, and then backed up so the nose of our bus was about 10 feet behind the nose of his.  He and Linda then both took photos with their cell phones.  When the photo shoot was done I pulled forward to the left and then backed in parallel to the building about four feet from the curb.  That gave Chuck plenty of room to pull up next to me on my passenger side and then back around next to the front building and get lined up to pull straight into his bay just as I had done earlier.

Back in the shop Linda wiped out the inside of the old refrigerator and then we reattached the two doors.  As she cleaned each rack, shelf, and bin I placed it back into the refrigerator.  When it was fully reassembled we plugged it in.  It came on, ran for about 60 seconds and then shut off.  It obviously was not cold yet, and might have been cause for alarm if I had not dealt with this “problem” before.

I knew from prior experience that the defrost timer had probably disconnected the compressor and connected the evaporator defroster.  Chuck pulled out three of his lawn chairs and we sat around waiting for the refrigerator to restart.  The only thing missing was three cold beers.  We knew the unit still had power as the lights were working.  There was an outside chance that the overload protector (fuse?) might have blown, but I did not consider that to be likely.  Our patience was rewarded about 25 minutes later when the compressor came back on.  While we were waiting we gathered up our tools and various materials and loaded everything back into the Honda Element.

Chuck had a message from his wife, Barbara, with her ETA so we decided to settle back into the lawn chairs and kibbutz until Barb arrived.  She showed up a little while later and Chuck got out a fourth chair and we sat in the shop listening to the sound of the functioning refrigerator and debriefing the events of the day.  As a result of the window frame hinge coming loose I am now of the opinion that I did not need to remove the two stop blocks.  I suspect they are there to “stop” the hinge from coming apart and I should not have removed them.  Chuck is also thinking about replacing the refrigerator in their bus and is going to check with Prevost regarding these blocks.  As much as anything I was annoyed with myself for the amount of time I wasted removing these blocks but what is done is done and I now need to reinstall the one block that came off undamaged and get a replacement for the other one, even though I can only attach it with one machine screw.  Butch thinks he can make one for me, otherwise I will have to get one from Prevost.

Our local electrical utility, DTE Energy, will pick up used appliances.  In the case of a refrigerator it has to be plugged in and running, which I presume means it is functioning and cooling the interior.  If so, they will take it away and send us a check for $50.  From our end that’s a good deal as we don’t have to pay someone to haul it away.  Because of the R-12 Freon there are very few places that will deal with it.  My guess is that DTE has a sub-contractor who will recover, clean, and recycle the R-12, which is no longer being made and has become very expensive.  They may also recycle the copper tubing and electrical wire, and possibly the metal case and other materials.  Even with the labor to do this work the unit must be worth more than $50 to them.

We all needed to get some dinner so we wrapped up our visit and started up our bus.  I pulled out onto westbound Grand River Avenue followed by Linda in the car.  At Beck Road we turned north and then got on I-96 westbound.  The bus was at 3/8ths of a tank of fuel so I decided to stay on I-96 and go to the Mobil truck stop at M-52, a run of about 30 miles that would allow the engine and transmission to come up to normal operating temperature.  Linda exited at Latson Road and stopped at Meijer’s to do some grocery shopping.

The Mobil truck stop is run down with a very poor, pot-holed apron and parking area, but there are usually several tractor-trailers fueling here when we pull in as it is one of only two places that a semi can refuel between Detroit and Lansing.  There weren’t any trucks getting fuel when I pulled in but it was 7:30 PM on a Saturday evening and there were a half dozen tractor-trailers settled in the parking area for the night.  I poured two bottles of Stanadyne diesel fuel additive into the fuel tank followed by two ounces of Racor Biocide.  I then added 125 gallons of diesel fuel to the tank, which took about 11 minutes.  By the time I paid for the fuel and was ready to pull out it was 8 PM.

I called Linda to let her know I was on my way and then reset the trip odometer.  I drove east on I-96 for 10 miles to the M-59 / Burkhardt Road exit and got on M-59, which only goes east from there.  Eleven miles later I made the turn south onto N. Hacker Road and completed the drive to our house.  Linda heard me idling in the street, where I stopped to lift the tag axles before making the tight right turn into our pull-through driveway, and came out to help get me parked.  Once I was positioned correctly I put the tag axle back down, let the engine low idle for a minute to let the turbo spin down and let the heads cool off and the temperature to equalize, switched the Level Low system out of drive mode, and shut off the engine.  I shut off the air supply to the engine accessories, shut off the chassis batteries, connected the shore power cord, locked everything up, and went in for the evening.

It had been a long day and we were glad to have it behind us.  I had been anticipating the refrigerator exchange, with some dread, for well over a month.  The concern was that we would not be able to move the units out/in through the window frame, requiring us to remove and replace the lower passenger-side windshield, or that something would go wrong, like the hinge, and turn out to be an expensive and difficult problem to fix.  With each passing day it was also becoming a bottleneck in our remodeling project, at least psychologically if not physically.  But it was finally done and ended well.  We will plug in the new refrigerator tomorrow to make sure it works.  We tested it in Chuck’s shop when it was delivered so we expect it to work now.  There is a lot of work to do but now we can get on with it and I expect it to go well.

In spite of being tired we stayed up and watched the PBS broadcast of the Simon and Garfunkel reunion concert they did live in New York City’s Central Park 10 years after they split up as a duo.  Their music remains among my most favorite from my youth and it has lost nothing with the passing of many years.

 

2015/08/01 (S) Refrigerator Swapping (NOT)

Leave a reply

We had a good crowd for our weekly SLAARC breakfast.  We sat across from Mike (W8XH) and had a chance to discuss what to do about the ‘extra’ user accounts on our computers.  We also discussed the release of Windows 10 that occurred on the 29th of July and all came to the conclusion that we would not be upgrading anytime soon.

When we got home I talked to Chuck on the phone.  He said the sun room company was still moving out of the building in front of his shop and that there was still too much stuff in the way to be able to move our buses around.  Given the circumstances we agreed that we would not do the refrigerator swap today and probably not tomorrow.

At breakfast Mike suggested that we look in the Users folder on our computers to see what files were associated with each of these previously unknown users and then delete the User accounts.  It turned out that these users did not exist, or at least had no folders or files associated with them that we could find.  Linda’s computer did, however, have a couple more folders in the Users folder that did not have User accounts associated with them.  When we deleted each of the phantom accounts we were given the option of saving any associated files in a folder on the desktop.  We selected that option each time but no such folders ever got created, confirming (I suppose) that there were no files associated with that account.

Bill, who takes care of the computers and software for the bakery, installed software on our machines when we first got them and Linda speculated as to whether these phantom accounts might have been inadvertently created at that time.  At this point we will probably never know.  We have strong security systems in place and are reasonably careful in how we interact with the online world, but it was a bit unnerving to find these accounts on our machines.

We were on tap for another warm, humid day and I elected not to do any work on the bus or in the garage.  With the phantom User accounts taken care of I transferred the photos that I received of the custom walnut desk from Jarel from my SG3 phone to my laptop computer and edited them for use on our blog.  I copied recent photos from my DSLR camera to my computer and then settled in to copy blog post drafts from e-mails into Word and edit them.

In the course of the day I did a couple of loads of laundry, worked on the sofa design/drawings, chatted on the ham radio, and took time out to have lunch and dinner, which was the left over Pad Thai.  Having sat for a day or two the dish had absorbed the liquid and, although Linda thought the broccoli was now too soft, I liked it better than when it was freshly made.  I also got to add a generous amount of peanuts, which is how I remember Pad Thai being served in restaurants.  After dinner I started reading “Number Theory and Its History” by Oystein Ore.

 

2015/07/25 (S) Monitoring

Leave a reply

We started our day with our weekly ham radio breakfast in South Lyon.  As we were leaving breakfast I called Chuck to see if he was at his shop.  He wasn’t but said he could be there between 11 and 11:30 AM.  We drove home, loaded up my car with the accumulated recyclables, headed over to Recycle Livingston, and then headed to Chuck’s shop in Novi.  We arrived before he did and let ourselves in.  I got his Dremel tool kit and pistol style soldering gun and we chatted for a while.  He had a noon appointment with someone at a commercial building he owns in Livonia, and we had a long list of project tasks to take care of, so it was a shorter chat than usual.  We stopped at the Lowe’s in New Hudson and bought a can of garage door spray lube and then headed home, stopping for fuel at the Brighton Shell station on Grand River Avenue at I-96.

At our ham radio breakfast Linda had rye toast and I had an English muffin for breakfast (our usual meals) so we were hungry by the time we got home.  We had roll up sandwiches of hummus, Vidalia onions, and greens with a drizzle of olive in a whole wheat pita.  Very tasty.  We then got to work installing the wall-mounted track for the ZioTek monitor mounting system I bought from CyberGuys.

The north wall of the ham shack. Critical points for the mounting of the ZioTek track system are marked with green tape.

The north wall of the ham shack. Critical points for the mounting of the ZioTek track system are marked with green tape.

Conceptually the installation was simple but it took all afternoon.  There is a kind of alcove at the north end of my office that serves as our amateur radio (ham) shack.  The purpose of the ZioTek system is to support up to four monitors on the north wall above the two desks located there so that they are not attached to the desks or using up any of the desktop real estate.  The walls in the office are 7/16ths inch thick T-111 exterior plywood with 1/2″ grooves on 4″ centers running the length of the plywood sheets.  The sheets are installed vertically so the groves run vertically giving the appearance of vertically installed 4″ wide rough sawn boards.  We finished the photo studio/office at the old house with this material so we knew we liked the way it looks.  Being plywood it has once major advantage and one major disadvantage compared to drywall; you can screw relatively heavy things to it, but holes are essentially impossible to repair.  What that meant for us was that we only had one chance to get the track in the correct location.

In this case “correct” meant:  at the right height and horizontal location to be able to position the monitors exactly where we wanted them while making sure the track was level.  To accomplish this I bought a 1″x6″-8′ poplar board to use as a mounting plate for the two track sections.  (All of the trim in the ham shack/office is poplar.)  We used pieces of tape to mark the locations of the corners of the three monitors on the wall and marked the centers of the VESA 100×100 mounting plates.  When we knew where the horizontal centerline of the tracks needed to be we determined the horizontal location of the tracks relative to the right end of the poplar board, which would be installed flush to the vertical trim in the northeast corner of the alcove.

The ZioTek tracks will mount to the horizontal poplar board which will be mounted to the wall at the studs.

The ZioTek tracks will mount to the horizontal poplar board which will be mounted to the wall at the studs.

We set the poplar board in the utility hallway and positioned the two tracks on it.  I butted the tracks together and slid one of the mounting plates so it saddled both tracks and kept them aligned.  The tracks are 4.5″ wide and the board was 5.5″ wide so I very carefully positioned the tracks for a 1/2″ reveal along both edges.  I then marked the eight mounting holes (four in each track) and removed the tracks.  Using a brad point wood bit that was slightly smaller than the central shaft of a #14 wood screw I drilled holes that were as carefully centered as I could make them.

We held the board in position against the wall and used a 1.5″ #6 finishing nail through the right mounting hole to hold that end of the board.  We then used a 4-foot level on the top edge of the board and secured the left end with a second nail through one of the mounting holes.  We positioned the chair where it will be when in use and made sure we liked the height of the board.  It looked and felt right so we proceeded to secure it to the wall.

The ZioTek tracks mounted to the poplar board mounted to the wall. Linda is vacuuming up sawdust from drilling.

The ZioTek tracks mounted to the poplar board mounted to the wall. Linda is vacuuming up sawdust from drilling.

Using a small carpenter’s square I marked locations for mounting screws one inch in from each edge of the board in vertical alignment with the small heads of the nails that secure the T-111 to the studs.  The 8-foot long board spanned six studs so I had 12 holes to drill.  I used a standard drill bit that was slightly smaller than the shaft of a #14 wood screw and drilled through the poplar board, through the T-111, and into the studs.   I used a countersink bit to create recessed pockets for the flathead wood screws.  We then secured the board using 3″ long #14 flathead wood screws.  We applied a little soap to the screw threads to help them go in.

I pulled the two small nails out of the track mounting holes.  Using the same drill bit I finished drilling out the mounting holes all the way through the T-111.  We positioned and partially installed one track using 2″ long #14 flathead wood screws in the two end mounting holes.  We then did the same thing with the other track.  I slid one of the mounts so that half of it was in each track and partially installed the remaining four screws.  I gently snugged up all eight screws, checking the track alignment as I went, and then torqued them down.  The heads stick up above the inside surface of the track but the shuttle mounts are raised on the underside so they slide right over the screw heads without interference.

The first of three monitors to get mounted. This one is on the left end of the tracks.

The first of three monitors to get mounted. This one is on the left end of the tracks.

With the track mounted to the wall we turned our attention to installing the monitor mounting arms and monitors.  We used one of the long arms on the left, the short arm in the center, and the medium arm on the right.  The other long arm will eventually end up on the far right or get swapped for the medium arm, but for now I only wanted to mount three monitors.  We installed the nice Dell monitor that goes with my older Dell Precision laptop in the center and installed the two ASUS monitors to either side of it.

By the time we got the third monitor mounted the office was in more disarray than usual and we did not have time to clean up tools and put things back in order.  Linda did manage, however, to run the vacuum cleaner and get most of the sawdust and wood chips sucked up.  Our son had called during the afternoon with a last minute request for babysitting services from Linda and I decided to go too.

A view of the mounts for the left and center monitors. This is a substantial system.

A view of the mounts for the left and center monitors. This is a substantial system.

We left at 6 PM for Ann Arbor and stopped at the Whole Foods Market to pick up a few things for dinner.  We got two different vegan sushi rolls, a cold couscous salad, and some organic black grapes.  When we arrived at Brendan and Shawna’s house a little before 7 PM Madeline was surprised and excited to see us.  Brendan and Shawna left around 7:15 PM for an engagement party and Madeline was fine with the whole thing.  She was still eating her blueberries and strawberries and then wanted Linda to read several books to her.  We went upstairs to see how her crib had been converted to a toddler bed, allowing her to get up during the night to use the bathroom.  Such a big girl.  But not too big for pajamas that featured fairies.

After another couple of stories Madeline went to bed without a fuss.  We then had dinner.  The California rolls were OK but the couscous salad was outstanding and the grapes were very good.  We sat on the couch using our iPads but I could not stay awake so I laid down and drifted off to sleep.  I was awakened about 90 minutes later by the return of Madeline’s parents.  Linda gathered up our leftover food and the roses the kids had gotten her as a “thank you” for babysitting on such short notice which gave me time to fully wake up.  We were on our way by 10:30 PM and back home shortly after 11.

 

2015/07/11 (S) Impactful Tools

Leave a reply

We had a small crowd for our SLAARC breakfast this morning but good conversation.  After breakfast we drove to Chuck’s house and picked up the manual impact screwdriver.  Barb was up in the thumb visiting her brother-in-law who recently lost his wife (Barb’s sister).  We lingered for a while and then left for home, stopping for gas on the way.

Back at the house I started a load of laundry and then went to work on the stop block screws.  Linda helped steady the ladder and pass tools and parts back and forth.  I got three of the four screws out of the two stop blocks but the head stripped on the forth one so I was only able to remove the aft stop block.  I tried different bits and even tried drilling a small hole in the center of the head to allow the bits to go in farther but it did not work.  The next approach will be a screw extractor, but first I have to go buy one.

We had soy yogurt for lunch with red grapes and I had a few pretzels with roasted red pepper hummus.  I kept trying to get to the basement to work on the desk design but kept getting detoured.  Once I finally reached my office I found that the mouse trap that I had placed under one of my desks was out in front of it.  The food was gone but there was no mouse, only mouse poop.  I realized that the trap was upside down which allowed the door to swing open.  Our best guess is that a mouse was trapped and the cats pulled the trap out from under the desk and accidentally turned it over while pawing at it trying to get the mouse.  Since there was no sign of a mouse having been caught by one of the cats my best guess is that it escaped, for now.

I checked e-mails and found the one with the credentials and instructions for the QTH.com web-hosting of SLAARC.com so I shared those with the other members of the SLAARC website team and then logged in to check out the log file I had created the other day as a test.

I decided to reconnect the Yaesu FTM-400 radio to the Diamond X-50 antenna on the tower so I could monitor the Novi and South Lyon repeaters while I worked in my office.  I had quite a mess on the ham shack desks and decided the best way to deal with it was to install Mike’s Icom IC-2820H in my car in place of our Icom V-8000 2m rig.  At least that would get the 2820 off the desk.  I checked that the mounting brackets and they were identical so I removed the V-8000 but left the mounting bracket installed in the car.

Mike had modified the power cord on his radio by cutting off the T-connector and replacing it with Andersen PowerPoles so I had to modify the power cable in my car to match as I could not modify Mike’s radio.  I removed the fuse from the positive (+12VDC) lead and then cut off the T-connector, leaving about 6″ of wire so I can add PowerPoles and make it into an adapter cable.  I brought my Hakko soldering station up from the basement, set it up on the floor behind the center console, ran an extension cord from the garage, and used it to solder PowerPole contacts to the two wires.  I then inserted them into the black/red housing pair and snapped them in place.

I mounted the IC-2820H, connected the power cable and connected the coax from the antenna.  I reinstalled the fuse in the positive lead, started the engine, and turned the radio on.  A couple of hams were chatting on the Novi repeater, one of whom I knew (Jim, KB8TAV).  When they finished I gave Jim a call and he came back to me, the first time I have been able to use the Novi 440 repeater from my car.  Jim signed off and I switched to the South Lyon 2m repeater and gave a general call.  Steve (N8AR) came back to me and we had a short QSO that verified the radio/antenna was also working on 2m.  As we were wrapping up Linda started fixing dinner.

Linda fixed a simple salad and Dr. Praeger’s vegan hamburgers with Daiya non-dairy cheese.  These patties were also squishy rather than firm and, like the ones at Zingerman’s Roadhouse the other night, where not very satisfying.  They tasted OK, and we ate them because we are not inclined to waste food, but there is a lot more to what makes food satisfying than just taste.  Sight, smell, and texture (mouth feel) are also important.

Linda had several TXT messages from Mara letting us know that she would be arriving tomorrow sometime before 2 PM as she wanted to watch the Wimbledon finals at that time.  Linda and I considered how best to accommodate Mara’s motorhome and finally decided to just pull our bus straight forward until the nose was at the edge of the concrete driveway.  That created more than enough space on the level part of the pull-through driveway for her to park and plug in to our 50 amp service.  The only loads we have in the bus at the moment are battery chargers so we used our 15 amp cord to plug it into a garage outlet.  Since I had to start it to move I switched it to high idle once I had it positioned, leveled it, turned on the OTR air-conditioning to put a load on the engine, and let it run for 30 minutes.

I returned to my office after dinner and work on the desk design for a while but by this point I was tired and not really in the mood.  The last time I updated the BCM page on our website was after the February 2015 issue came out.  I have had articles in the March, April, and May issues and will have articles in the June and July issues.  I captured the covers from March, April, and May and updated the page.

I exchanged e-mails with several people and spent some time looking at dual and triple monitor stands on EBay.  We rarely use EBay and the site made me change our password before it would let me log in.  There was a large selection of products but none of them were exactly what I am looking for.  There wasn’t any rush so I decided to revisit this tomorrow.

 

2015/06/27 (S) ARRL Field Day

Leave a reply

At 5 AM I was vaguely aware of the sound of rain.  The cats were chasing each other through the house so I got up to make sure nothing was amiss, such as another mouse.  They were just having a bout of morning friskiness.  I added a little food up to their bowls, which drew their attention, and went back to bed.

My Amateur Radio vanity license plate. There were a LOT of these in the parking lot at the SLAARC Field Day site.

My Amateur Radio vanity license plate. There were a LOT of these in the parking lot at the SLAARC Field Day site.

I finally woke up and got up about 8:15 AM and got dressed in a suitable manner for today’s American Radio Relay League (ARRL) Field Day event.  The temperature was in the mid-50s, overcast and raining with blustery winds; not exactly the nice summer day we were all hoping for.  Some of the members of the South Lyon Area Amateur Radio Club (SLAARC) were gathering for breakfast at the usual place (Senate Coney Island) at the usual time (8 AM) but we obviously did not join them today.

I went to my office to retrieve my Sony DSLR and decided to turn on our Icom IC-7000 ham radio.  I had it tuned to the SLAARC (K8VJ) repeater in South Lyon when Keith, KD8YYJ, announced his presence.  He was driving from the west side of Howell to Wixom and seeing what repeaters he could hit.  We chatted for 10 to 15 minutes and I invited him to stop by the SLAARC Field Day site at the South Lyon Township James F. Atchison Memorial Park.

I worked all day yesterday as part of the SLAARC Field Day setup crew.  There was more setup to do starting at 9 AM this morning but the setup mostly involved radios, computers, Wi-Fi networking, and power.  I was not in any humor to rush off into the clammy weather conditions, and Linda was up by this point, so we had breakfast.  She found some Silk brand ‘yogurt’ at Meijer’s last week so we had that.  It was OK.  It is a creamy style yogurt, which is not my preference, but it was tasty enough.  Bananas, cinnamon raisin bread, and juice rounded out the meal.  Linda even made the coffee.  I turned on the natural gas fireplace to ward off the chill in the living room where we lingered and enjoyed our morning brew.

The SLAARC Field Day operating stations use wirelessly networked computers (left) running N1MM Logger+ to record the contacts that are made. HF transceiver to the right.

The SLAARC Field Day operating stations use wirelessly networked computers (left) running N1MM Logger+ to record the contacts that are made. HF transceiver to the right.

I finally left for the Field Day site around 11 AM.  The operating event started at 2 PM but the first of four meals was lunch today at noon and I wanted to capture photos of the rest of the setup and the lunch event.  It was raining lightly when I arrived and continued to rain until I left at 2:15 PM.  In between arrival and departure I took some photos and helped out a little bit, but there were plenty of people there taking care of what needed to be done.

Mike (W8XH) brought his Icom IC-2820H dual band mobile radio and several lengths of 50 ohm coax and we transferred those to my car.  He then walked me through the various menus and functions his new Yaesu FTM-400DR/DE radio, a dual band (VHF/UHF) 50 Watt rig with digital voice capability and a color touch screen display.  A group of SLAARC members recently purchased a Yaesu DR-1X repeater that works with the new Yaesu digital voice and data modes in addition to the traditional FM mode and are testing it as a replacement for the current, and very old, K8VJ repeater.

Mike’s IC-2820H is available for $350 but the FTM-400DR has a $100 rebate through the end of June, bringing the price down to $500.  As much as I would like to have a VHF/UHF radio in my car I am looking at one of these radios to install in the cockpit of the bus so we can use it going down the road.  The long-term plan is to put the Icom IC-7000 HF/VHF/UHF radio in our towed vehicle and get the Hi-Q 80-6 antenna mounted and operational in addition to the Diamond SG-7900 VHF/UHF antenna that is already on the Honda Element.

For base station use I would like to get an Elecraft K3s or Flex SDR rig.  The K3s has become the rig of choice among the members of the SLAARC who are serious about working HF and contesting.  Either of those are radios that could be fairly easily moved from the house to the bus when we travel.  Antenna options in the bus could include running coax to the Hi-Q on the toad and/or a “flagpole” HF vertical that is mounted using the towbar receiver or a base stand that goes under one of the tires.  An antenna switch would allow the use of the VHF/UHF antenna that was already installed for the cockpit radio.  All of these “base station” options would obviously be for stationary use only.

[Photo 3 – HC]

The ARRL FIeld Day event showcases the ability of amateur radio operators to set up equipment in the field on short notice and keep it on the air for 24 hours, no matter what. The weather turned bad for the event. The portable generator is under the tent in the right foreground.

The ARRL FIeld Day event showcases the ability of amateur radio operators to set up equipment in the field on short notice and keep it on the air for 24 hours, no matter what. The weather turned bad for the event. The portable generator is under the tent in the right foreground.

I uncoiled the coax cables that Mike lent me to see how long they were.  There was a 5 foot piece that was too short for what I needed, and a piece that was approximately 40 feet, which was longer than I needed.  The third piece was at least as long as the 40 footer.  I “tagged” his coax with small white cable ties so I could identify them later and return them to him.

I did not want to mess around switching coax cables in the rain so I unboxed Mike’s Icom 2820 and got it set up to use with my existing antenna and transmission lines.  I spent a little time with the manual and then powered it up.  It was already configured from when Mike used it in his ham shack so I did not need to do any setup to use it.  I monitored both the South Lyon 2m and Novi 440 MHz repeaters and was able to “hear” both of them, although the South Lyon signal was much better (stronger, quieter, clearer) than the Novi.  A couple of SLAARC members were on the South Lyon repeater taking care of Field Day business.  I waited a suitable amount of time after they were done and called for Mike (W8XH) and he came back right away.

We repeated the testing we had done last night.  The performance with the 2m South Lyon repeater seemed to be much better but the performance on the 70cm Novi repeater was the same or worse with a fading component to the noise.  I think we were on the air 15 to 20 minutes.  Based on the test results from last night and this afternoon I think I have two separate issues that are probably interacting; the IC-7000 needs to be grounded and the 25 feet of coax from the cable entry box (CEB) to the radio (Go Box) needs to be shorter and much higher quality.  I need to install the ground bar on the wall behind the ham radio desks and then purchase a suitable length of ground wire and run it from the CEB to the copper ground bar.  I will also need to get a 15 foot length of 50 ohm LMR-400 coax from Scott (AC8IL) with an N-male connector on one end and a PL-259 connector on the other end.

Linda prepared our dinner at 5 PM.  She made corn-on-the-cob and “cowgirl steaks,” a new (to us) vegetable protein product she found at Meijer’s.  After dinner we drove back to the SLAARC Field Day site to socialize with club members at dinnertime.  The weather at our house was still rainy with light-to-moderate winds and occasional stronger gusts.  We arrived at the Field Day site to find a flurry of activity and strong, steady winds out of the north with continued sporadic rain.

Jim (KC8WMW) stays dry as he works the GOTA (Get On The Air) station in one of the tents.

Jim (KC8WMW) stays dry as he works the GOTA (Get On The Air) station in one of the tents.

The small red tent that was originally supposed to be the VHF tent was nowhere to be seen and at least eight people were engaged in trying to control and fold up the large canopy that the club purchased yesterday at Costco to serve as the combined VHF and GOTA tent.  We quickly learned that the small tent, which was not being used, had collapsed and the large tent, which was unoccupied but full of radios and computers, had come unstaked and blown over in the wind.  Those who were not helping with the equipment canopy were gathered in the food canopy.  I pitched in on the equipment canopy rescue and Linda took the camera and joined the folks in the food tent.

After gathering up all of the pieces of the canopy and getting them back in the trailer some of the team added extra ropes and stakes to the windward end of the food canopy and both the 20m and 40m tents.  Another part of the team, including me, got Marty’s (KB8JIU) satellite tracking equipment out of the screen room, which had been draped with solid plastic tarps to keep the rain out, and then took the room down, disassembled the legs, folded it up, and stuffed it in the trailer.  The red tent was stuffed under a picnic table that was in the screen room so I grabbed that and put it in the trailer.  The support pole for one end of our off-center-fed dipoles was bending over to the south more than we liked.  Steve, N8AR, tied a rope around the existing rope, which was inline with the antenna and being used to keep it taught.  He slid the second rope up the first one as far as he could get it to go and then pulled it out to the northwest (the antenna was oriented east-west with the tension rope running east off of the east end).  He pulled it out until the support pole was reasonably vertical and I staked it down.

The winds really howled out of the north driving the rain before them. This shelter (from Costco) did not survive along with another tent and a screen room.

The winds really howled out of the north driving the rain before them. This shelter (from Costco) did not survive along with another tent and a screen room.

So the bad news was that some of our Field Day setup had not survived the weather which had not even reached severe conditions.  The good news was that our generator was still producing power, all of our towers and antennas were intact and functional, we had our two key stations on the air, and our food canopy was full of people and hot food.  Not the Field Day everyone had hoped for, but a great opportunity for teamwork and camaraderie and a learning experience to be sure, even if it was not the kind of lesson we wanted to learn.

We left around 7:30 PM and went to the New Hudson Lowe’s, which was very close to our Field Day site, where I bought 18 feet of AWG 6 stranded copper wire with a green sheath.  As soon as the weather improves I plan to run this from the CEB to the ham shack and use it to connect the ground bar in the shack to the copper backplane (ground plane) in the CEB.  I will then connect the ground on our Go Box (Icom IC-7000) to the ground bar and see if it helps with my noise issue.

Back at the house Linda wanted to watch an episode of NCIS Los Angeles, which we can now do thanks to our new OTA TV antenna.  We then watched an episode of Christina Cooks, Christina Perillo’s vegan cooking show from a decade ago.  These are still relevant and useful episodes and we especially enjoy them having seen and met her and her husband Robert on our two Taste of Health Holistic Holiday at Sea vegan cruises.  Linda read and I wrote for a while before lights out and off to sleep.

 

2015/05/30 (S) Chuck and Barbara

Leave a reply

There were thunderstorms west of Lansing just before midnight last night but they did not reach our house during the overnight hours and we slept OK.  We were up at 7 AM and off to our weekly SLAARC breakfast.  Linda had a phone message yesterday from Nancy at FirstMerit Bank indicating that there was still a problem with the SLAARC bank account so we stopped there after breakfast but Nancy wasn’t in.  They have frozen the account while we sort out the paperwork, causing our annual insurance check to not clear.  Linda has been in touch with the insurance company, so they are aware of what is going on.  When we got back to the house she wrote a personal check for the insurance premium and put it in the mail.

I gathered up the laundry, sorted it according to color (light/dark) and temperature (cold/warm), and started the first load.  I downloaded and installed updates last night for my ASUS laptop computer so they finished installing when I started it this morning.  I developed the habit a long time ago of checking for additional updates any time I install some and sure enough there were 11 more optional ones available.  I did not install Skype for Windows Desktop 7.3 since I have Windows 8.1 and I did not install the update for a Ricoh printer as we do not have one.

There was an 80% chance of rain starting at 11 AM but the rain did not wait until then to start.  Around 10:45 AM the skies opened up and the rain came down as if poured from buckets.  By noon it was partly sunny, but steamy.  I checked the national radar on my Wundermap iPad app and it looked like we would have more rain as the day went along.

Linda loaded a few things on the bus before the rain started and then busied herself with food preparation.  Larger RV rallies have multiple activities going on every day and evening and Linda does not have the time to prepare meals from scratch.  Being as we will only be gone for a week she prepared enough food to see us through and will only require reheating in the microwave.  It’s a good approach; we still eat well and she has the time to fully participate in the rally.

In spite of the threat of rain I decided to wash the exterior of the bus.  It was already wet anyway and the conditions were otherwise good with a heavy overcast, no direct sun, and moderate temperatures.  I got the outside water turned on, got out some hoses, and connected the pressure washer.  A bucket of McGuire’s Deep Crystal automotive soap (purple bottle) and the long, adjustable handle brush completed my bus cleaning arsenal.  The water softener only had 137 gallons remaining when I started and I ran it down to zero by the time I had cleaned the bus and the Honda Element, so I do not know exactly how much water I used cleaning the vehicles but I’m guessing it was 150 gallons.  That sounds like a lot of water but it is surprising how much water we go through in a typical day, especially if we are doing laundry or running the dishwasher.

I was finishing up washing the bus around 3:30 PM when Linda let me know that around 3:20 PM Chuck Spera had texted me and left a voice message letting us know that he and Barbara were in our general part of town and asking if they could stop by.  Linda replied to the text message and said “sure” and Chuck replied that they would be here around 4:30 PM.  I started the regeneration cycle on the water softener, got all of my equipment put away, and changed clothes.  I uploaded my blog post for May 28th and was sitting in the living room using my iPad when they arrived.

The reason for their visit was to see what we were up to with the remodeling of the interior of our bus.  I had extended an open invitation to Chuck a week ago and today worked for them.  We showed them the bus and explained what we planned to do.  Linda and Barbara went inside to sit and chat while Chuck and I continued the bus conversation in the bus.

Chuck and I finally came in the house and I showed him the ham shack/office which he somehow missed seeing on previous visits including our open house.  By 6:30 PM we were all hungry and Linda suggested La Marsa in Brighton.  It had started raining again and that, combined with the slightly later dinnertime, resulted in available parking spaces and immediate seating.  After studying the menu we suggested the Koshary and salad.  They accepted the recommendation so we each had lentil soup and split an order of Koshary.  The only difference was that we had ours’ spicy and they had theirs’ regular.  They also liked the garlic spread and warm pocket bread.  We finished the meal with coffee and Barbara sweet talked the manager, Gordon, out of complimentary baklava, this being their first visit to a La Marsa restaurant.

We got home around 9:30 PM.  The water softener finished regenerating around 8 PM so I put the next load of clothes in the washing machine.  Driving on our street we noticed that a branch on the south side about 0.2 miles in from the main road was hanging out farther and lower than usual to the point where we would not be able to navigate past it in the morning without scraping (scratching?) the side of the bus.  I located a small saw and Linda drove me back down there to try to cut it off.  At the point where I could reach the branch it was over 2″ in diameter and my little saw was not up to the task of cutting through it.  I did make enough of a cut, however, that I was able to bend it and get it to crack.  That allowed me to pull it down and tuck it into some other low branches and keep it off the road.  Not the nicest pruning job, but it was raining steadily and it was dark and I was standing in a ditch.

Linda transferred the laundry to the dryer and then started the dishwasher.  We finally got to bed at 11 PM where Linda read while I worked on this post and played a few games on my iPad.  We still have quite a bit to do to get ready to leave but should be able to pull out of here tomorrow around noon.

 

2015/05/16 (S) Trucks and Buses

Leave a reply

To paraphrase, “If it’s Saturday we must be in South Lyon” and that was, indeed, the case.  Most of the regulars were missing from our weekly breakfast gathering of the South Lyon Area Amateur Radio Club (SLAARC), but six of us showed up and had a great conversation.  By the time we headed towards home it was starting to rain lightly.

We stopped at Brighton Honda to get some information on the Honda Ridgeline pickup truck.  The salesman was very nice, but unfortunately Honda has stopped making the Ridgeline.  They are reintroducing it in the fall of 2016, but we will likely make a decision about a new car/truck sooner than that.  There are still a few in stock around the country but we already have an orphaned Honda Element.  We like the car, but would be happier if they were still being made.  In this case, however, it was a moot point as the Ridgeline is not towable four wheels down.

We drove next door to Brighton Ford to look at F-150 pickup trucks.  We were assisted by Frank Stapleton and he was easy to work with.  He insisted that we meet his new car sales manager, Eric Wilkinson, before we left.  We felt that was unnecessary at this stage in the process, but he also seemed like a nice enough guy.  The entry level XL 2-door may be reasonably priced (not really, but what car is?), but the slightly nicer XLT 4-door short bed with 4-wheel drive, towing package, and off-road package looks like it would price out at $45,000 give or take three grand.  Without X -Plan pricing that is simply not going to happen, and even with X-Plan pricing it is not a sure thing.  Frank really wanted us to test drive one but given the rainy weather we were not in the humor to do that today.

The F-150 is a nice truck, nicer in fact than many cars, and perhaps nicer than a pickup truck needs to be or should be.  On the plus side it certainly has ground clearance, but on the negative side (for us) it is also BIG.  The back seat room in the four door body style is cavernous, made larger by fold up seats, and that would be very useful for us when traveling in the bus.  Between the back seat and the bed we could store a LOT of stuff.  It has well-placed handles by all four doors, and it is a god thing as we both needed them, along with the running boards, to get in and out.  There are several engine options including the 2.7 L and 3.5 L Eco-Boost models, both of which feature twin turbochargers.  These are high-tech engines, with incredible power and torque and decent fuel economy. I liked the sound of that, but unfortunately that technology comes at a significant price premium.  Interestingly, Ford is using an aluminum body and the truck weighs in at about 4,700 pounds.  Our Honda Element weighs over 4,000 pounds and it is not nearly as big as the F-150.  How well the aluminum will hold up is unknown.

We were almost home when we decided to keep driving and visit LaFontaine Nissan.  While not as convenient as the Brighton dealerships, it is only 15 miles from our house, 13 of those headed east on M-59.  Linda checked their hours on her phone and they were open until 4 PM.  The purpose of our visit was to look at the Nissan Frontier pickup truck and the Nissan Xterra SUV, both of which Edmonds.com suggested were viable off-road alternatives to a Jeep Wrangler while Consumer Reports indicated they were more reliable and more practical than a Jeep Wrangler.  Bobby Lundwall, the Commercial Manager, assisted us and we met the General Sales Manager, Don Poley, before we left.  Bobby was very helpful and brought a Frontier and Xterra around front for us to see.  Again, we were not interested in test driving one at this stage, especially in the rain.

The Nissan Frontier pickup has an available 4-door, 4-wheel drive, short bed model.  It is considered a mid-size truck and is noticeably smaller than a Ford F-150 in every way.  The Pro-4X off-road version has 10.1 inches of ground clearance at the differential, which should be adequate for our needs.  It has a transfer case but is only towable four wheels down with the 6-speed manual transmission.  We looked at the Xterra but found it harder to get in and out of, especially the back seat.  It is taller than the Frontier and after due consideration we agreed that we were not really in the market for an SUV.

The Frontier does not have the bewildering array of options that the F-150 has and would be more suitable for the 95% of our driving that is on local paved and dirt roads.  It would be perfectly adequate for hauling materials from Lowe’s to the house and has an available tent option for camping.  We presume that aftermarket bed covers, canopies, and even small truck campers are available but we would check on that before buying one.  Ditto for Blue Ox base plates and the ability to install an SMI Air Force One auxiliary braking system.

We did not test drive one, but it was easy to get in and out of, and comfortable to sit in, at least in the front seats.  It weighs about 4,500 pounds, basically that same as the much larger F-150.  The only negatives at this point are the manual transmission and lack of choice on interior fabric; the Pro-4X only comes with a charcoal interior, either cloth or leather.  The bottom line was that it is probably a better fit for us than a Jeep Wrangler or a Ford F-150 and could be acquired for under $35,000 equipped the way we want it.  Nissan also has zero percent financing available at the monument, although that is often in place of other incentives.  The fact that it requires a manual transmission to be towed four wheels down, however, probably knocks it out of contention.

Storage compartment under the lift-up bed platform. The two boxes concealed and protectd 4" flexible HVAC ducts.

Storage compartment under the lift-up bed platform. The two boxes concealed and protectd 4″ flexible HVAC ducts.

Once we got home we had a light lunch.  I then changed into my work clothes and got back to work deconstructing the inside of our motorcoach.  (I like the term deconstructing as I think it is more descriptive of what I am doing that demolishing or even disassembling.)  My goal for today was to finish removing all of the carpet and all of the carpet tack strips.  I accomplished all of that except for a piece of carpet on the wall behind the driver’s seat and a piece on the front wall of the entry stairwell.  My first task, however, was to cut a short slot in the 3/8″ plywood filler that was under the dinette in order to free an AC electrical cable that ran through it and then through the floor.

Getting the carpet off of the sides of the bed platform was interesting.  There was a piece of wood trim installed along the top edge of the side of the bed base facing the front of the bus and just under the plywood bed platform.  The trim strip is rabbited on the underside and conceals a 12VDC strip light that is tied in with toekick lights in the bathroom and the floor lights in the hallway.  The power for the lights comes from inside the bed base through a small hole in the plywood and carpet.  The trim strip also appeared to be installed over the carpet and needed to be removed to get the carpet loose along the top.

Under-bed storage compartment with bot HVAC ducts uncovered.

Under-bed storage compartment with bot HVAC ducts uncovered.

There was also an adjustable HVAC louver on each side of the bed.  The louvers were installed from the outside and had flexible heater ducts slipped over them on the inside and secured with screws.  The flexible ducts were in the storage area under the bed and were covered by wood boxes to protect them.  The boxes, in turn, were carpeted to match the rest of the storage compartment.  To disconnect the wiring for the strip light and remove the boxes I had to first empty out all of the stuff stored under the bed so I could get in there to work.  The bed platform is hinged about one foot from the head end and the foot end lifts up, supported by two gas struts, so there was plenty of room to work once I emptied it out.

I have disassembled enough of the bus at this point to have some idea of how the conversion was built.  The cover “boxes” for the flexible ducts were actually half-boxes with a long side and top and one small end.  They were installed into a corner using a cleat screwed to the floor that the bottom edge of the long side was then screwed into.  There was a similar arrangement to catch the free edge of the top and it was screwed to the inside wall of the platform base.  All of these screws were put in through the carpet that covered the boxes and were essentially invisible so I had to find the screw heads by touch and back them out.

The area just forward of the bed base with the bed platform raised and facing the driver side of the bus.

The area just forward of the bed base with the bed platform raised and facing the driver side of the bus.

Once I got the protective boxes loose I discovered that the floor and wall were also carpeted.  There was a small bump out in each rear corner that served as wiring chases for AC electrical outlets on each side of the bed, and these bump outs were carpeted.  It seemed clear to me that the HVAC ducts, which are part of the OTR HVAC system, may have originally been installed directly into the HVAC chase outside the bed base and later repositioned to the sides of the bed thus requiring the louvers, flexible ducts, and cover boxes.  They also greatly reduced the available storage space under the bed.

The OTR HVAC chase runs along the floor-wall junctions on both sides of the bus for most of the length of the coach and a 12″ section of it is accessible on either side of the bed.  Removing the two flexible ducts, sealing up the openings, and installing the louvers outside the bed platform will free up additional storage space under the bed which is a good thing as we can always use for storage space.  That’s a nice bonus but adds some additional work to the remodeling project.  Such is the nature of remodeling; you never really know what you have until you have completed the deconstruction phase.

The aft side of the bed base. There is not a lot of room to work in here so I will remove the bed platform when I install the new tile floor. I plan to use the same tile on the sides of the bed base.

The aft side of the bed base. There is not a lot of room to work in here so I will remove the bed platform when I install the new tile floor. I plan to use the same tile on the sides of the bed base.

It was overcast all day with humidity near 100% and rained off and on into the evening.  It was also warm so I kept opening the roof vents and running the fans to make it more comfortable in the coach, but every time I did it started raining shortly thereafter.  When I was done working on the bus for the day I moved the ten concrete blocks that had been supporting the propane tank for the whole house generator and pulled up the utility marker flags for the underground gas line to our meter.  Keith will be here to cut the grass this coming week and I want him to be able mow these areas.

Linda spent the afternoon thoroughly cleaning the kitchen.  She also prepared a sugar-water solution, filled the hummingbird feeder we bought at Lowe’s the other day, and hung it off the railing of our rear deck.  A hummingbird found it almost immediately which was very cool.  For dinner Linda made pan-grilled tofu slices with caramelized onions and sweet BBQ sauce served on tortillas.  She also sautéed fresh broccoli and sliced up some fresh strawberries and pineapple.

After dinner Linda went to the Edmonds.com website to see if she could get a better feel for dealer cost and Fair Market Value for the Ford F-150 and Nissan Frontier.  While she was at it she looked up the Chevy Colorado (GMC Canyon), and Toyota Tacoma.  The Chevy Colorado was Motor Trend Magazine’s 2015 Truck of the Year.  Both the Colorad0/Canyon and Tacoma are mid-sized pickup trucks.  Toyota’s full-size pickup is the Tundra.

Brendan called while we out to see if Linda could sit with Madeline tomorrow night while he and Shawna had dinner with their friend Jorge.  Depending how the day goes tomorrow I may go to Ann Arbor with her.  We had two episodes of Sherlock left to watch and the DVDs have to go back to the library on Monday, so we watched both of them this evening.  It was a double feature so I made popcorn in-between episodes.

 

2015/05/09 (S) ICAAN, Can You?

Leave a reply

Today started with our usual SLAARC breakfast.  Linda has been cleaning up the financial records for our ham radio club and discovered in the process that the status of our EIN application was murky.  She has spent some time this past week trying to track down just what happened so she can figure out what to do to fix it.  She finally determined yesterday that the EIN that was issued by the IRS was indeed valid and approved but it does not appear that the 501(C.)(3.) non-profit status was ever established correctly.

When we got home we loaded the disassembled plastic foundation from our old Select Comfort mattress into the back of my car along with our usual tubs and bags of recyclables and drove to Recycle Livingston.  We had no other errands to run and returned home directly.

Scotty (AC8IL) reminded me at breakfast that Universal Tower in Mt. Clemens, MI (Clinton Township) sells free-standing aluminum towers that are compatible with the used Heights tower we bought last year.  I may be able to get a tower section to replace the iron clamshell and also a base to set in the concrete.  I made a quick check of their website but some of the pages did not load correctly on my iPad.

I checked the ICANN domain name registry for “SLAARC.com” and all of the owner/contact information still referenced Gary, who set it up originally in 2009.  I dealt with a change in ownership for “dactm.org” years ago and it was not a simple, easy process.  Add in the GoDaddy factor, and moving the domain name registration and web-hosting from GoDaddy to QTH.com is something I am not looking forward to.  I sent an e-mail to Mike and Larry seeking their input and assistance.  I checked and replied to a few other e-mails and then went upstairs.  Our USPS carrier, Michelle, came to the door with a small package that would not fit in our mailbox.  It was my prescription medications that we thought would be delivered on Monday next week.

Linda headed to the grocery store while I changed into my work clothes and started working on getting the dinette in the bus disassembled and removed.  I figured out that the dinette was, indeed, built in two pieces.  The base was screwed to the floor and had a u-channel around the top that was sized to receive a similar upside down u-channel on the bottom of the upper part.  The two channels were locked together by screws inserted horizontally from the inside.  The upper part was the seating and seat backs, most of it with built-in cushioning.  All of the leather furniture in the bus is in less than ideal condition and the foam cushioning is shot.  The furniture was designed so that the only way to replace it would be to remove it, disassemble it, rebuild it, and reinstall it.  We do not like it enough to do that and after owning the bus for over five years we now know how we want to change the furniture and re-purpose the space.

Needless to say, but said anyway, coach converters only care about making the original buyer happy and count on them getting rid of the coach long before any of these design decisions become an expensive maintenance and repair issue.  And that is a shame, really, because luxury motorcoach conversions are elaborate, expensive custom projects and the buses being used for these projects are capable of being driven for 50 years and 2,000,000 miles given the required routine maintenance.  Over that kind of time and miles the house/systems are also going to need maintenance but they do not seem to be designed/built with that in mind.

When Linda returned from her shopping she helped me get the two pieces of the dinette out of the coach and into the garage.  She then got back to work at her desk finishing up the accounting for our ham radio club.  I continued working in the coach figuring out how to disassemble the J-lounge sofa that occupies the rest of the passenger side of the living room and mated to the dinette.  Like the dinette it was a custom designed piece of furniture built specifically for this coach and constructed in the same way.  The differences were its size (longer), and three powered accessories.  From front to rear the accessories were a footrest, center table, and drawer.

The footrest is self-explanatory.  The center table rises up/out of the base in the center of the couch (after removing the loose seat cushion that covers it) and goes back down/in if you need that spot for sitting.  We set it at a comfortable height, level with the tops of the seat cushions, without it intruding into the limited isle space and pretty much left it there.  The drawer would have been just a drawer if not for the large rubber tube used to open and close it at the touch of a button.

The tube, about 1/4″ in diameter, is arranged like a long, skinny race track above the drawer and under the seat.  At the back end, deep in the bowels of the couch, is a motor with a vertical shaft connected to a horizontal drive pulley.  The tube is looped around this drive pulley and the other end is looped around a second horizontal pulley at the front edge of the drawer opening.  That pulley is free to turn.  If that’s all there was to it turning on the motor would cause the tube to just go round and round in one direction or the other.  The top back of the drawer, however, has a little finger sticking up that was clamped to the tube so when the tube moved it pulled the drawer with it.  At least it did before the tube broke.  The big drawer under the sleeper sofa is also powered by a similar mechanism, or was until the tube broke.  Neither of these drawers has worked as a powered drawer in the 5+ years we have owned the coach.  The motors work, but they do not cause the drawers to open or close.

All of these mechanisms are very clever but ultimately completely unnecessary.  Footrests can be actuated manually, drawers can opened and closed by hand, and a table can be built in where it needs to be.  These mechanisms also add weight, require power, wiring and control switches, represent potentially difficult (expensive) maintenance and repair items, and take up space that could be better used to store things.  To paraphrase a popular song of my youth “the things that pass for luxury I can’t understand.”

Because of all of these mechanisms the J-lounge was considerably more work to disassemble as they made it more difficult to access the screws that held the top piece to the base and the base to the floor.  In order to get to everything I had to remove the footrest, the table, the drawer box, and two decorative panels.  The drawer was attached to a pair of substantial double suspension glides by four bolts with Nylok nuts inside the drawer.  The suspension glides did not have release mechanisms so I had to remove the drawer box.  The two rear bolt heads were virtually inaccessible but I eventually figured out where to position the slides so I could push the bolts out from the inside.

Somewhere in the middle of this work Linda came out to bus.  It was good timing on her part as I was at a point where I had to assume awkward positions to reach things and having her hand me tools was very helpful.  The top back edge was wedged under the window trim so once everything was unscrewed we moved the couch out from the wall enough to lift the top off, verifying that it was unscrewed from the floor and the top was completely disconnected from the base.  We did not carry the pieces out of the coach, however, as we need to remove the front passenger seat first and create space in the garage for the pieces.  The couch and dinette are about 16 feet long when installed.

Disassembling the couch was not a problem as we are not going to reuse this furniture nor are we going to try to sell it or even give it away.  The most we might do is see if the metal has any value as scrap.  If not, Linda will call our garbage service to see if they will pick it up on our regular trash day.  I plan, however, to remove and keep the motors, pulleys, and acme screw linear actuators; you never know when you might need something like that.  🙂

I asked Linda if she wanted to go out for a pre Mother’s Day dinner and she said yes.  We went to La Marsa in Brighton and got there before 6 PM which allowed us to find a parking spot and not have to wait for a table.  I had their fresh lemonade, made with juice from fresh squeezed lemons and oranges blended together with ice.  I suspect it also had honey as it was sweet.  It was delicious.  The pita bread and garlic spread were good as usual.  We split the salad, which was god, and an order of zesty almond garlic Ghallaba (vegan).  This is the second time we have had this dish here and it has been a real disappointment both times.  We have come to the unhappy conclusion that the food at this La Marsa is simply not as good as the food at the Farmington Hills location.  Sadly, it is one of the few places in Brighton or Howell where we can get something vegan besides a salad or a no-cheese pizza.

When we got home I made some decaf coffee and we settled in to read, write, and play games on our iPads.  We looked at the website for Polar Power Inc.  They are a competitor to SunFrost and make similar kinds of refrigerators but with some important differences.  They sell to the marine market and have super-insulated units with remote compressors that run directly on 12VDC or 24 VDC.  Unfortunately the only unit they make that will fit in our enclosure is 9.6 cubic feet, and some of that is the freezer compartment.  It would allow us to build a generous vertical slide out pantry, but it is just not enough refrigerator volume.   Replacing the refrigerator is going to be a difficult project but it will be nice when we are done, especially if we can gain a tall, narrow, deep pantry in the bargain.  I plan to call SunFrost and Polar Power to see if they will make a custom sized unit and if so, what the added charge would be, but I expect the answer to be “no.”

I am once again behind on posting blog entries and need to upload all of the posts so far for May.  I did not take any photos in that time so they will be a bit less work.  I did take photos today, however, so now that we are back in project mode I really need to get back in the habit of off-loading images daily, selecting a few for the blog, posting it, and filing all of them for use in future magazine articles.

 

2015/04/02 (S) SLAARC and Company

Leave a reply

We arrived at the Senate Coney Island before 8 AM for the weekly SLAARC breakfast.  Paul (N8BHT) was already there and we were followed in closely by Steve (N8AR), Mike (W8XH), and Jim (N8HAM, the best call sign ever).  Bruce (W8RA) and Linda (NF8C) came in next followed by Harvey (AC8NO) and Diane, and then Gary (WA8TJA).  Others continued to come in but I lost track after that.  We sit at a long, two-sided table arrangement, so you can only talk easily to the person on either side of you and the three or four people across from you.  Bruce and Linda sat across from us.  The two Lindas like to talk so we try to arrange the seating to make that possible when we can.

Bruce and Linda just closed on a 25 acre property in Florida that includes a very nice house with a ham radio shack and five (5) towers with antennas so that was the main topic of conversation.  Bruce is also thinking about putting up a “barn” with a pad next to it for an RV so we talked about the requirements for the pad and the type/placement of the hookups.  We both had coffee and Linda had her usual dry rye toast.  I decided to change things up and had a dry, toasted bagel instead of my usual dry, toasted English muffin.  Sometimes you just have to live on the edge.

After breakfast we went to First Merit Bank along with Harvey and Diane.  Harvey is the SLAARC President, I am the VP, and Linda is the Treasurer and we are the folks currently on the account.  There was an issue with the bank’s paperwork and they needed to photocopy our driver’s licenses and get our SSNs.  It turned out that they also did not have the club’s EIN even though Linda and Paul, the outgoing treasurer, took care of some of this in late February.  Nancy helped us and was very nice, explaining that the bank had changed its policies and procedures recently and now required more documentation than in the past.  No problem, the bank is open on Saturday mornings and we are almost always in town for breakfast.

With our banking business concluded we headed towards home via Grand River Avenue.  We knew from yesterday that traffic was moving through the I-96/US-23 construction zone just fine, as long as there wasn’t an accident, but we wanted to stop at Brighton Chrysler Dodge Jeep Ram which is on GRA just west of US-23.  We walked around the lot looking at the Jeep Wranglers, especially the Unlimiteds, and after a suitable amount of time David Wade came out and introduced himself.  He showed us around, answered our questions, and gave us a nice brochure (book) and features/options guide.  We liked his attitude and demeanor and left feeling comfortable with him and the dealership.

We focused in fairly quickly on the Willy’s Unlimited model as the one that we thought would best fit our needs and budget.  It is similar to the Sport, which is the base trim level for the Jeep, but is available with the hardtop and, most importantly, the Rubicon heavy-duty suspension and off-road (knobby) tires. The Rubicon is the top of the line Wrangler Unlimited (4-door) but it is not just fancier in terms of electronic gizmos; it has an entirely different suspension, transfer case, and other “features” that make it the most off-road capable as delivered by the factory.  We liked the copper/bronze color, as it would go nicely with the paint scheme on our bus, but I am also partial to the canary yellow as it would be the most visible if we were broken down in some remote place.

A new Jeep Wrangler Unlimited would be a big purchase for us but no more expensive than buying a used one as they appear to hold their value better than most vehicles.  With a new one we can order it just the way we want it, leaving off all of the expensive upgrades we do not want/need (in-dash GPS, entertainment system, etc.) and adding only those that we do want/need (hardtop and suspension upgrade).  New also means a 6-year, 100,000 mile powertrain warranty and a 3-year, 36,000 mile bumper-to-bumper warranty.  David also told us that we can purchase a lifetime bumper-to-bumper warranty for about $3,000.  We will obviously have to do some research on that.

We finally got home around 10:30 AM Home.  Linda added a few more items to her grocery list and went to the supermarket.  I started a load of laundry and then moved a lot of my “stuff” from the dining room to my office.  After rearranging old stuff to make room for the new stuff I settled in at my desk to work on computer/web-based tasks.

Gary was the SLAARC webmaster before me and indicated at breakfast that he was still getting e-mails from the SLAARC reflector and asked that I remove him from the e-mail forwarding on our GoDaddy account.  My focus for the last two years has been getting the WordPress website built and launched so I had never looked at this aspect of our web-hosting account.  I had some familiarity with the concept, however, from the e-mail accounts that are part of our personal domain and sub-domain.  It was fairly easy to figure out how to edit the existing account and add new ones.  Once I was done I e-mailed all of the club members who were affected by the changes and asked them to review them.  I will check for replies tomorrow and then send test messages.

I got an e-mail from Linda at BCM with the SD version of the March 2015 digital issue attached.  I logged in to the website and downloaded the HD version.  This issue is two months late, the latest it has been since Gary took over the magazine in October 2012, due in part to yet another change in editors that did not go smoothly.  The magazine has been at least a month late for a year now and is slipping farther out rather than closing the gap.  The sad reality is that the magazine does not have enough subscriber base or enough advertisers to be sustainable and Gary is not able to pay enough to get an editor who can/will put out a quality magazine once a month.  But he has not shut it down yet so I will continue to work on articles.  I don’t get paid for my writing and photography.  It’s a hobby and I like it that way as I am not obligated to do anything and I can make my own ground rules.

John and Diane Rauch arrived at 5 PM to visit and have dinner.  They are our longest/best Michigan friends and we always enjoy visiting with them.  They also have two children who went to school with our kids and now have children of their own.  Diane is an educator and is retiring at the end of the school year after a long career as a high school English teacher.  Naturally, our conversation had to do with retirement, travels, and family.

Linda used our outdoor grill to roast marinated potatoes and cook veggie-fruit kabobs.  John and Diane brought a nice Riesling from Woodcreek that we enjoyed before dinner.  We opened a bottle of our 2009 Egri Merlot to serve with the meal and had Biscotti cookies and vegan chocolate “ice cream” later for dessert.  Linda and Diane got a new online game configured on Linda’s iPad and got several things straightened out on Diane’s iPad.  They headed for home around 10:30 PM as it’s a half hour to get back to their house which is only a few minutes from our previous home.

We stacked the dishes in the sink and left any further cleanup for tomorrow.  We tried to watch the 2nd episode of the 1st season of Sherlock (PBS) but either the DVD was damaged or there is something wrong with our player.  The disc was obviously scratched so that may have been the cause, but I want to rule out a defective player.  We have another one in the basement that I will use to test the disc.  If the player needs to be replaced new ones are relatively cheap and I will get one that can also play Blu-Ray discs.

 

2015/04/21-25 (T-S) IN, MI, Home

Leave a reply

2015/04/21 (T) Back to Twelve Mile, IN

The outside air temperature dropped into the 30’s (F) last night and the air temperature in the coach fell to 60, so when I got up this morning I turned on the Aqua-Hot diesel-fired hydronic heating system to take the chill off.  We eventually got up, got dressed, and walked across to Small Town Brew to get a couple of cups of coffee and chat with owner Lisa Paul and her friend/neighbor, Ashley, who helps her run the coffee shop.  Both of them remembered both of us, which was nice.

It’s interesting sitting in a small town coffee shop, where everyone is a friend or relative, and just listening to the conversation.  We are outsiders her, of course, strangers to most of the folks who drop in, but everyone is nice to us.  Some are curious about who we are, and where we are from, but rarely ask why we are there, in this little coffee shop in this little town, surrounded by corn fields.  Of course, we usually mention that we are friends of Butch and Fonda, so that probably answers whatever questions they may have had.

We eventually returned to our coach and had breakfast.  We tried connecting our WiFiRanger to Butch and Fonda’s Wi-Fi router yesterday and it was able to connect and obtain an IP address but the data transfer rate was so slow that web pages would not load and e-mail would not download before timing out.  I turned our Verizon Mi-Fi on and we had a very weak but usable signal, so I connected the WFR to the Mi-Fi and we were able to do the few things we needed to do online.  We then went in the house to let Butch and Fonda know we were awake and see what they were up to.

Butch’s brother, John, and his nephew, Brock, showed up and helped Butch with the driver side front wheel assembly on Butch and Fonda’s MC-9 bus.  The tire/wheel was off when we arrived yesterday and I learned that Butch is replacing the hub bearings and seals, installing an automatic slack adjuster for the brake, and replacing the brake pads.  It looked like quite a job with some large, heavy parts, so I did my part by staying out of the way.  I also took a few pictures at Butch’s suggestion.  He does not want to write articles for Bus Conversion Magazine, but he has been interested in having me write articles about projects on his bus.

Linda spent some time working with Fonda’s new sewing machine that she got while they were in Quartzsite, Arizona.  It is a little smaller than a regular sewing machine, only weighs 13 pounds, and only cost about $130.  Linda gave her sewing machine to her sister many years ago but now that she is retired she is thinking that it might be nice to have one for mending tasks or projects, such as new privacy curtains for the bus.

Butch got a catalog recently from Crimp Supply in Royal Oak, Michigan, which is not at far from our house.  I glanced through it last night and it contains a lot of specialized parts that would be useful to a ham radio hobbyist or someone converting a bus into a motorhome.  I called and requested a catalog and had a nice chat with Debbie.  She was willing to provide me with additional catalogs that I can give to members of GLCC and CCO at the Back-to-the-Bricks and/or Surplus & Salvage per allies in August and September respectively.  She was also willing to show up in person and give a brief presentation on her company and hand out the catalogs.  Cool.

Brock had to leave after which Butch and John decided to go to the shooting range along with a third guy whose name I did not get.  I went along to see the range and watch what they were doing.  Butch had home-brewed some shotgun shells for his Ruger revolver and wanted to test them.  They caused the revolving chamber to jam so they will require some additional work.  John had a new semi-automatic pistol and wanted to see how it handled.  He also had ammunition he had loaded with bullets he had cast and wanted to test fire them.

I was offered the opportunity to shoot but declined.  I have never handled a pistol and it would have been a waste of good ammunition.  I did take a class in rifle marksmanship while I was at the University of Missouri – Columbia many years ago.  I was in the Air Force R.O.T.C. Program at the time and thought I should know something about how to handle a firearm.  Learning to handle a pistol correctly would have been more relevant, but I do not recall a course being offered for that.  I bought a Ruger 10-22 rifle at that time, and I still have it.  It’s a .22 caliber semi-automatic rifle designed to look like an M-1 carbine and features a 10-round rotary clip that is flush to the bottom of the stock when inserted.  I was only interested in shooting at paper targets so I added a scope to it.  It is safely tucked away with a trigger lock on it, but I have not fired it in many, many years.  I should probably bring it to Twelve Mile the next time we come down, let Butch inspect and clean it properly, and take it to the range just for grins and giggles.

John and the other guy went back to Logansport from the range.  When Butch and I got back to the house he continued working on the driver side front wheel of their bus.  I helped a little, but mostly by taking photographs for a possible future article.  After putting tools and parts away we sat and relaxed for a while and then all of us went to Logansport for dinner at Pizza Hut.  It was 8:45 PM by the time we got back so everyone said “good night” and turned in for the evening.

2015/04/22 (W) Chillin’ in Twelve Mile

Yesterday looked and felt more like winter than spring with gray, cloudy skies and blustery, cold winds.  The temperature overnight dropped into the mid-30s but we were toasty warm under blankets with our electric heating pad turned on.  I got up at 7:30 AM and turned on the thermostats.  The temperature in the kitchen was reading 63 degrees F but the temperature by the dashboard was only 53.  The Aqua-Hot has performed very well since I rebuilt the blower bearings and quickly brought the temperature in the coach up to 70 degrees F.

We put on our sweats and walked over to Small Town Brew for coffee and conversation with owner Lisa Paul and whomever else might be there.  Three local guys were enjoying their morning brew when we arrived.  They eventually left and were replaced by others.  Most of the patrons seemed to be retired or semi-retired farmers.  One fellow, Lee, chatted with us at length about a canvas covered hoop barn he put up.  It was constructed using laminated wood hoops rather than steel, was 30′ wide by 70′ long and cost about $4,000 15 years ago, although I was not clear whether that included the 4-foot high poured concrete walls.  He already owned concrete forms and the heavy equipment that one finds on farms, so he was able to do a lot of the work himself without renting equipment or hiring contractors.  Still, it has to be the lowest cost way to create a structure for getting our bus out of the weather and out of sight.  It is unknown, however, whether the Township and County would let us to put it up.

Butch left at 8:30 AM for medical appointments in Logansport and Fonda came over at 10:45 AM to gather up Linda for a girl’s day out.  Linda wanted to go to McClure’s Apple Orchard on US-31 between IN-16 and US-24.  Although it is very close to Twelve Mile Fonda had never been there.  They were then headed to Peru.  Although it is the same distance from Twelve Mile as Logansport and Rochester it is the city that Butch and Fonda visit the least.  Peru’s claim to fame is that it was the birthplace of Cole Porter and Emmet Kelly and was the winter home of several circuses many, many years ago.  I believe there is a circus museum there that Nick Russell wrote about in the Gypsy Journal.

With no bus project or social interactions I settled in to work on my blog and await everyone’s return.  It started out sunny this morning but by 11 AM was thickly clouded over and looking wintery with blustery winds.  The only bus project I had in mind to do today was to pull out the chassis batter tray, check the circuit breakers, disconnect the batteries, swap the upper 12 V pair with the lower 12 V pair and reconnect them.  It was not something I wanted to do alone and I did not have to do it today, especially under cool, windy, overcast conditions, so I ended up not doing it.

Linda and Fonda eventually returned, having first gone to the Walmart in Logansport.  Linda picked up some hummus and Snyder’s sourdough pretzels so we snacked on those for lunch.  Linda then hung out with Fonda while I continued to work in blog posts.  Butch finally returned from his medical appointments and busied himself with something.  Whatever it was, he was not outside working on their bus and neither was I.  I managed to get the post for April 1 – 3, 2015 uploaded to our blog.

Linda and Fonda developed a plan for dinner.  Fonda made a nice salad and baked a loaf of par-baked bread that we got from Marilyn.  Linda made black beans and rice and prepared a mix of fresh blueberries and strawberries for dessert.  Linda and I each had a glass of Franzia Red Sangria.  After taking all of dirty serving containers back to our coach we returned to the house to visit a bit longer and finally returned to our coach just after 9 PM.  That left me enough time to pull together the posts for April 4 – 6 and upload it before turning in for the night.

2015/04/23 (R) Return to Michigan

I was awake at 6:30 AM and finally got up at 7 and put on my sweats.  The Aqua-Hot was already on so I turned up the thermostats and turned on the engine pre-heat loop.  I also turned on the Broan cube heater and pointed it into the cockpit as the temperature on the dashboard was only 50 degrees F.  I walked over to Small Town Brew, got a cup of coffee, and said “so long for now” to owner Lisa Paul.  Linda was still asleep when I got back so I fixed a couple slices of toast for my breakfast, turned on our Verizon Mi-Fi, and settled in to take care of a few e-mails.  Linda finally got up and, as I suspected, had not slept well last night.  She had some toast and orange juice but had no interest in coffee, a strong indicator of just how tired she was and not feeling completely well.

When she was done with the toaster I turned the cube heater off and turned the electric block heater on.  The overnight low temperature was forecast to drop into the upper 20’s and starting the big Detroit Diesel at that temperature is hard on the engine so I wanted it nice and warm before I cranked it over.

Butch had an appointment with an ophthalmologist in Indianapolis around noon and had some other things to do down that way as long as they were there so he and Fonda planned to leave by 9 AM.  He came to our bus just before 9 AM to let us know they were close to leaving and that he put an air hose out by the automotive bay so I could fill the front tires on the bus if needed.  Based on the readings from our TireTraker TPMS, however, no adjustment was needed.

We planned to leave sometime after they did but not later than 10 AM.  The main reason for not leaving sooner was to give us time to digest our breakfast, but the other reason was our relatively short drive today to Camp Turkeyville, an RV park on I-69 just north of I-94.  This will be the first time I have been in Michigan, which I certainly consider home, since we left on November 30, 2014.  Turkeyville is only 80 miles from our house, but we will have a full hookup site so we can dump our waste tanks tomorrow morning and not need to use them on the final short drive to the house.

We started getting ready to leave around 9:45 AM.  I shut off the block heater, put Butch’s air hose away, and then took care of the chassis batteries, auxiliary air, and shorepower.  The DD fired right up and I switched it to high idle while it built air pressure.  As soon as the chassis was at ride height and the air dryer purged I pulled onto IN-16 pointing eastbound and pulled into the curb/parking lane.  That was around 10 AM.  I left the engine idling while Linda pulled the car up behind the bus.  By the time we hooked up the car for towing, checked the lights, and pulled away it was closer to 10:20.  I noted that the time was 10:30 AM EDT as we pulled onto US-31 N from IN-16 E.

Traffic was light and we had an easy run up US-31 to US-20 except for the 15-20 MPH crosswind from the WNW.  I also had a very cold breeze blowing into the cockpit by my feet and had to turn the heat up to stay comfortable.  We were an hour into our trip when I finally realized that I had not opened the air supply valve for the shutters on the two front house air-conditioner condensers which are installed in what is normally the spare tire bay.  Those shutters are held open by a spring and held closed by air pressure.  When they are open air can easily find its way into the cockpit.  There is also a mechanical damper that is supposed to regulate fresh air flow to the cockpit, or cut it off completely, but the flexible actuator cable broke some time ago and the damper/cable are difficult to access so it has not been repaired.  Either the cable broke with the damper in the closed position or I taped some sort of cover over the air inlet once upon a time because once I closed the shutters for the A-C compressors I no longer had cold air coming in by my feet.

Traffic was heavier on US-20 eastbound but it always is as it runs just south of South Bend and Elkhart, Indiana, and a bit north of Goshen.  It is still a limited access highway until east of Elkhart, so it moved along up to that point.  There was one stretch between there and Middlebury where major construction was taking place, but we got through that easily enough.  After that it was a nice, rolling, 2-lane highway and we rolled along at 55 MPH except for the occasional town on intersection.  We always enjoy driving through this part of Indiana.

We turned off of US-20 onto I-69 N, crossed into Michigan at 12:53 PM EDT, and pulled into the Michigan Welcome Center five minutes later.  We only had 37 more miles to our destination but we both needed a short stretch break and I wanted to open the air valve for the A-C shutters, which is in the bay under the driver’s seat.  We resumed our trip and exited I-69 at exit 42 around 1:45 PM, crossed over the highway, and traveled the 500 yards to the Camp Turkeyville entrance.  We followed the long, wide, winding entrance road and stopped at the office where Linda got us registered.  They put us in a 50A full hookup pull-through site with easy access that was long enough for us to leave the car hooked up for towing.

We went through our usual arrival routine and then Linda fixed a light lunch of French Country Vegetable Soup and a tofu hotdog on pita bread with mustard and relish.  She also made a pot of coffee.  We connected our WiFiRanger to the RV Park Wi-Fi system but did not seem to be able to move any data so we turned on our Verizon Mi-Fi and connected the WFR to it.

Linda spent the afternoon reading a book on her iPad and I mostly worked on my blog post for April 7, 8, and 9.  I had 14 photos for that post but inserted them into the post rather than put them in a WP image gallery.  I logged into our personal WordPress site, installed WordPress 4.2, and then installed updates to plugins and themes.  Once that was done I uploaded the blog post and uploaded/captioned/inserted the photos and generated the tags.  I clicked the “Publish” button about 7:10 PM.

Linda put dinner on the table about 10 after I finished working.  She made a nice tofu scramble, a dish that vaguely resembles scrambled eggs, and served it with toast and jam, a small glass of juice, and black seedless grapes.

I thought about working on my blog post for April 10th, as it is the last one for which I have photos, but I was too tired to get involved in that tonight.  We pointed our front OTA TV towards Battle Creek and Kalamazoo, found the local CBS station, and watched a couple of episodes of The Big Bang Theory and whatever else was one.  We caught some local weather and decided to enable the diesel burner on the Aqua-Hot, turn the thermostats on, and set the temperatures for 60 degrees F.  The overnight low temperature was forecast to be 27 and it was already 29 when we went to bed.  Welcome to Michigan in late April.

2015/04/24 (F) Touchdown

I awoke at 6:30 AM to an outside temperature of 27 degrees F.  Our coach has several ways it can be heated if we are plugged into adequate electrical power, including three electric toe-kick heaters.  I turned on the Aqua-Hot diesel burner and electric heating element last night before going to bed and left the living room and bathroom thermostats turned on with the temperature dialed back to just under 60 degrees.  I also turned on the Broan cube heater, dialed back the thermostat, and set in on the step to blow into the cockpit.

I got up at 7:15 AM and put on my sweats. It was 60 degrees F on the kitchen counter, but the refrigerator adds some heat mid-coach.  The thermometer on the dashboard read 53.  I turned the thermostats up to 68 and turned on the Aqua-Hot engine preheat loop.  I also turned on the front electric toe-kick heater.  I made coffee and then turned on the electric block heater for the engine.  I checked e-mail and monitored our amperage while I waited for the coach to warm up and for Linda to get up.  We were drawing about 30 A on Leg 1 and 20 A on Leg 2.  On a true “50 A” RV electrical service with a main circuit breaker that functions correctly we can safely draw 40 Amps on each leg, so our usage was not going to trip any breakers.

By 10 AM the temperature was up to 40 degrees, the sun was shining, and it’s was delightfully cozy in the rig.  I got a call from Michele Henry at Phoenix Paint in response to an e-mail I sent her yesterday and talked to her for 15 minutes.  We had planned on a 10:30 AM departure but by the time I connected the sewer hose, dumped the waste tanks, and put the hose away it was 10:45.  We had the bus and car ready to travel by 11AM and pulled out of our site.  We had to wait for a few minutes until someone moved a 5th wheel which they had temporarily parked in the middle of a two-way road while waiting to get into their site.  We finally made our way out of Camp Turkeyville and pulled onto I-69 N at 11:13 AM.

We had an easy run to our house and our wheels “touched down” on our driveway at 12:45 PM.  Even the dirt roads for the last two miles of our trip were in reasonably good shape, which made for a nicer homecoming.  We opened the house, put the cats in their carriers, and took them inside.  I got the bus plugged in and the air shut off while Linda put the batteries back in the water softener and sanitizer and turned the well pump on.  I turned the gas back on for the kitchen and fireplace and then set all of the thermostats up to 65 degrees F.  We unloaded a few things from the bus and then had lunch, after which I sent text messages to both of our children and to Chuck Spera to let them know we were home.

After lunch we unhooked the car from the bus and continued unloading the bus but did not get everything taken off.  I was tired and took a long nap, only getting up when Linda told me it was time for dinner.  We had a Daiya Mushroom and Garlic pizza.  We have used Daiya vegan cheese for a while but did not know they made pizza products until we saw them at the Dierbergs Market in Edwardsville, Illinois.  It had a thin, crispy, rice flour crust (gluten-free), lots of garlic and cheese (of course), and was very tasty.  I wish we could buy them near our house.

After dinner I called Butch to let him know we made it home safe and without any new or reoccurring bus issues.  He had reassembled the driver side steer wheel and discovered that the new brake drums he got from MCI some time ago are the wrong ones, so he is going to have to track down the correct ones next week.

2015/04/25 (S) Return to Regular

Do you remember when OTA TV stations used to break in to programs with special news bulletins or emergency alert tests?  At the conclusion of such interruptions the announcer would say “we now return you to your regular programming.”  Having spent most of 61 years living in stationary dwellings we still consider being back at our house to be the baseline for our regular lives.  The last two years, however, we have spent half of the year, more or less, living in our converted motorcoach.  That fact, combined with the fact that we moved to a new-to-us house just before we started our extended traveling, has altered our perception of what constitutes “regular.”  All we know for sure is that living this dual lifestyle is our new normal and we like it.

Whether living at home or in the bus we have routines.  Part of our “at home” routine is Saturday morning breakfast with our friends from the South Lyon Area Amateur Radio Club (SLAARC) and that is how we started our day.  We took our usual route to South Lyon and were surprised by the extent of the construction work at the I-96 and US-23 interchange.  We knew this interchange was scheduled to be rebuilt starting this year but as of March 1st, when Linda last drove through there, work had not started.  A lot has happened since then, and from the look of things this is going to be a BIG project.

There were a LOT of people at breakfast, 24 by Linda’s count.  It was good to see our friends and ease back into ham radio talk.  The club president, Harvey Carter (AC8NO), had the personalized club jackets we ordered from Sunset Sportswear in South Lyon over the winter so we got those from him after we were all done eating.  The jackets are dark blue with fleece lining and yellow embroidery that looks very sharp.  The left breast says “South Lyon Area” on top and “Amateur Radio Club” underneath.  On the right breast is our first name (in script) on top and our call sign underneath in block letters.

We stopped at Barnes and Noble on the way home to pick up a gift for grand-daughter Katie and found two books that we thought would interest her.  One was on rocks and gems and the other was on snakes, both of which are interesting to Katie.  Both are also an integral part of the desert southwest where we spent the winter.

When we got home I set about the tasks of moving various pieces of technology from the entrance foyer to my basement ham shack/office, reconnecting it to power and our network, and starting it up.  I started up our Linux box but the video driver would not “catch” so I shut it down and restarted it in Windows 2000 Pro, updated the es|et nod32 anti-virus database, and installed three Microsoft updates.  I checked e-mail on my primary laptop, responded to a couple, and then installed updates on all of the websites I manage.  WordPress just released version 4.2 and each new release triggers a flurry of plug-in and theme updates.

Our daughter, Meghan, had arranged for us to come over mid-afternoon to visit and have dinner without the bother and fuss of fixing a big meal.  Minn, the female cat, hid immediately but Inches, the male cat, hung around for a while.  Grand-daughter Katie is working at Pizza House in Ann Arbor where he dad, Chris, has been the general manager for a long time, but she got off work and arrived just after us followed by Chris, who had run out to pick up dinner at Seva.

Our son, Brendan, daughter-in-law Shawna, and grand-daughter Madeline showed up a little later, and Inches promptly disappeared.  Madeline is very sweet and interacts with her two kitties, Gus and Iggy, just fine but our cats, and Meghan’s/Chris’s cats, disappear whenever she comes to visit.  They are just not used to the size, motions, and sounds of a 28 month old.

Seva is a vegetarian restaurant that has been a staple of the Ann Arbor restaurant scene for many years but recently moved out of downtown to a location on the far west side of Ann Arbor.  While not just around the corner from Chris and Meghan’s house it is much closer, and easier to get to, than driving into downtown.  Many of their menu items are vegan, or can be made vegan, and that is mostly what they ordered.  We had a nice visit with excellent appetizers and main dishes, a dozen choices in all, and a nice Riesling wine from Washington State.

After appetizers we distributed the gifts we had picked up for everyone.  Besides Katie’s books Madeline got a “Dr. Seuss” book about deserts and a t-shirt from Marilyn with a design on the front that changes color in the sunlight. Both of our children, who kept an eye on our house for us over the winter and took in our mail, got the following:  A bottle of Red Chile Wine from St. Clair Winery in Deming, New Mexico; a bouquet of pequin chiles from Hatch Chile Sales in Hatch, New Mexico; a box of Prickly Pear Cactus jellied candies and a jar of Prickly Pear Cactus jelly from Organ Pipe Cactus National Monument in Arizona; a bag of Green Chile Pistachios from Eagle Ranch (Heart of the Desert) in Alamogordo, New Mexico; a two box set of olive oil and peach balsamic vinegar glaze from Queen Creek Olive Mill in Queen Creek, Arizona; and a non-stick grilling mat from the “Big Tent” RV Show in Quartzsite, Arizona.  We appreciate what they do when we are away which would be more complicated for us without their assistance.

We enjoy looking for gifts that are unique to the areas we visit and tend to limit ourselves to items that are consumable so no one has to find room to store or display something, at least not for very long.  We saw many wonderful art and craft objects this winter but they present a special challenge beyond simply getting them home.  We are no longer collecting “things,” as we already cannot display or store the stuff we have, and our children are in somewhat the same situation (which is why we still have a lot of stuff instead of them having it).

Then there is the matter of taste.  Both children have their own taste in art and have carefully arranged items for display on their walls and shelves.  As much as we might like something, and think someone else might like it, buying art for other people is fraught with peril because there is an implied expectation that it will be displayed.  If it is displayed but the recipient does do not like it then the gift is intrusive.  If it is not displayed the giver is disappointed and potentially offended.  Better to stay clear of all that by avoiding surprise gifts.  The exception is if we know they are looking for something in particular and we come across one.  In that case it is a simple matter to take a photo with one of our smartphones and message them to see if they want it, making it clear that “no” is an acceptable answer.

Madeline goes to bed at 8 PM so she left (with her parents) at 7 PM.  Both Minn and Inches came out shortly thereafter to have a bite to eat and get the attention they had missed for the last four hours,  We stuck around for another hour which gave us just enough time to get home before it got really dark.  Brendan and Shawna had kept/used Linda’s Honda Civic all winter. They came in two cars and went home in one so that Linda could get the Civic back to our house.  There is a chance that she will have to go into the bakery a day or two this week and I do not like be without transportation, especially when we have a lot going on.

We sat in the living room for an hour reading and relaxing with our favorite iPad apps/games but without the benefit of our natural gas fireplace logs.  I lit them when we got home and they operated for about 60 seconds and then shut off and would not relight.  I turned the pilot flame off and will deal with that tomorrow.  I went to bed, read for a while longer, and then went to sleep.