Tag Archives: Phoenix Paint

2013_08_09-12 (F, S, N, M) Odds And Ends

Leave a reply

There is a certain routine to being back at the house, and when we are here it feels like we should get back into that routine.  Otherwise, it becomes too easy to sleep in, start slow, and not get around to even thinking about doing things until the afternoon, by which time it is too late to start anything.

Friday we were still unloading a few things from the bus, finishing up laundry (me), weeding the flower beds (Linda), catching up on accounting tasks (Linda), catching up on operating system updates (me), and other such necessities of daily living.  I placed calls to various service providers and filled out an online trouble report to try and get our AT&T phone line back in service.  Based on the missed calls on our answering machine, it appears that the phone line quite working around June 25th.  What I found interesting was that our High Speed Internet (HSI/DSL) worked fine and never went out.

With necessary chores attended to I turned my attention to writing first drafts of articles for Bus Conversions Magazine (BCM).  I had started an article a while back on the exterior makeover so finished a first draft of that and sent it off to Michele Henry of Phoenix Paint for review.  I had six other projects I had worked on the last 11 months that I also thought would make good articles.  Over the course of the weekend I completed first drafts of all six and sent all seven article drafts off to the Publisher (Gary Hall) and Editor (Wendy Crosby) of BCM, sans pictures.

Until today (Monday) the weather has been delightful since we returned, with blue skies, a few puffy white clouds, highs in the low-to-mid 70’s and lows in the upper 50’s.  Friday evening we decided to get out of the house for a while so we drove to downtown Brighton and went for a walk along the Mill Pond.  This is a large pond formed by a small dam in the heart of downtown, and it has a boardwalk that runs along the east side for about 1/2 mile.  Besides people there were ducks and geese, including babies, and a swan.  We also saw bluebirds and two muskrats.  Downtown Brighton is a happening place on a Friday night.  There were lots of people at the many restaurants, but equally many out walking.

Part of our routine is Saturday morning ham radio breakfast, usually with the South Lyon Area Amateur Radio Club (SLAARC) of which we are members, but occasionally with the Novi Radio Club.  Having been gone for a while we went to the SLAARC breakfast.  It was good to see our ham radio friends and catch up on what everyone has been doing.  Folks were interested in our travels, of course, and we enjoyed sharing a little bit about that.

Back home I decided to run a computer network cable from our AT&T Gateway to my office in the basement so I could connect the computers down there to a hub and and connect it back to the Gateway.  I’ve been trying to accomplish this connectivity with WiFi, but have had limited success.  I ran a small experiment first to make sure it would work, plugging my laptop into the hub and the hub into the Gateway with all of the components in close physical proximity to the Gateway.  It worked, so I proceeded with the larger project.

I had to enlarge a hole from the basement up into the wall cavity behind Linda’s desk, and managed to nick the Cat5 cable that carries the DSL/phone signal to the Gateway.  Naturally the AT&T repair truck showed up a short time later.  That did not turn out to be problem, however, as the technician very quickly determined that the problem was somewhere upstream in their system.  He had our signals restored at the outside junction box long before I was ready to reconnect to them.

I managed to get the Cat6 network cable run through the suspended ceiling in the basement and into the office.  I put the hub in the center of the room and ran the longest cables I had from various devices across the floor and over things.  I would include a picture, but it isn’t a pretty sight.  😉  The hardwired connection isn’t necessarily faster than the wireless one, but it stays connected, which is more important than speed.

While I was at it I decided to run a new, higher quality Cat6 cable from the AT&T junction box (outside) to the AT&T Gateway (inside).  After poking around in the attics above the garage and the house, I decided that this was not a project that had to be done at this time.  As I have worked on projects in the basement I have been removing old telephone wires as we use a cordless phone system and the wiring is obsolete.  I was going to to continue that work, but decided for now to just fix the cable I had damaged and get our phone/DSL connections back on line.

Another part of our routine is the Sunday morning Howell Farmers Market.  The nice weather continued and we enjoyed strolling through the market and talking to the vendors.  We bought some corn and peppers and herbs.  We bought some more coffee beans from Irene’s Beans of Milford, and also from Teeko’s of Howell.  Teeko’s is not far from our house and they keep their beans green until you buy them.  They then roast them to your taste while you wait.  They have a very wide selection of beans, including 100% Kona and Jamaica Blue Mountain.  These are premium coffee beans and are not generally available even at upscale food markets.

On Sunday Linda split her time between weeding, her computer, and just relaxing, which usually involves reading.  Of course she also took time to make meals, which were good, as usual.  I continued working on articles drafts and started updating our GPS units.  I had the docking/update software for both units installed on an older laptop that is not very fast, even with a hardwired network connection.  I replaced the hard disk drive in that laptop some time ago with a solid state drive as I plan to use that computer to run the Silverleaf VMSpc software for monitoring the bus engine while I drive.  I figured the SSD would be more tolerant of bumps and vibrations.  It probably is, but I did not figure on how incredibly slow it would be.

It took quite a while, but I got the Garmin nüvi 465T updated.  This is a nice little GPS unit designed for truckers (the T model) with a 4″ diagonal screen.  Because it is designed for truckers, we can create profiles for different vehicles/combinations, including length, width, height, and weight.  That is very handy when driving a large vehicle.  We use it in the toad, and as a backup for the bus.  I need to move the docking software to my newer laptop if I can figure out how to do it.  Part of the problem is that I also have map subscriptions installed on the old laptop and have to move those as well.

Sunday night was our monthly SLAARC meeting in South Lyon.  Linda opted not to go, but as the Vice-President of the club for this year, I really needed to make an appearance.  Besides, the program was on how to use an oscilloscope.  The presenter was (Dr.) Steve Smith, N8AR, a member of our club and retired electrical/communications engineer who worked on the space program at one point in his career.  Steve has done a number of presentations for our club.  They are always good, and they always draw a crowd, and this was no exception.

This morning (Monday the 12th) we woke to find it very overcast with a high probability of showers for most of the day.  That meant we would not be doing much outside work today.  Our Honda Element (towed vehicle) was overdue for it’s 75,000 mile service, so we took it to Brighton Honda right after breakfast.  While I was getting it written up Linda picked up my favorite Amy’s frozen pizza for dinner as she had plans for dinner and movie with Diane; their belated annual birthday night out.

I planned to continue working on my articles for BCM, selecting, adding, and annotating photos to illustrate them.  But first I decided to install the docking software for our Rand-McNally RVND7710 GPS.  That was easy; the software resides in the non-volatile memory of the unit, which connects to the computer via a USB cable.  I checked for updates; there were some, so I installed them.

I then decided to purchase the Lifetime Map updates, which I had not done previously.  I accomplished that easily enough but had a little trouble getting the docking software to accept the Activation Key.  Closing the software, powering the GPS down, turning it back on, and re-launching the docking software got it to work, but that wasn’t part of the instructions.  Great; time to download and install updated maps, which I did.  It took eight (8) hours!  I know our Internet connection is not very fast, and  I have no idea how much data got downloaded, but 8 hours?!  Unfortunately that tied up my laptop for most of the day, so whatever else I had hoped to accomplish got delayed.  But that was OK; it rained all day, and a slower pace with a subdued tone somehow seemed appropriate.

 

2013_06_21 (Fri) FMCA Day 3

Leave a reply

We went to bed last night with a 20% chance of rain in the overnight weather forecast.  We are not sure when the rain started, but around 5:00 AM the skies opened up and it rained hard for an hour.  We are camped on somewhat higher ground with good grass sites and red rock roads, so the water drained away and we did not have flooding or muddy site/road issues.  This was not the case in other CAM-PLEX RV parks, as I discovered while walking to the 9:45 AM International Area (INTO) meeting.  My timing was bad, and I walked the 3/4 mile to the Wyoming Center in a downpour that included pea-size hail.  My raincoat and small umbrella were no match for the rain, and there was not a golf cart or shuttle (school) bus to be found anywhere.  In the end it was just water, and clothes eventually dry out.  Always looking for the learning experience in any situation, I resolved that we would purchase serious wet weather gear when we had the chance.

Linda remained in the coach to make sandwiches for lunch as we planned to meet up with Louise Stuart and Craig Davis after the 11:30 seminars.  We went to the Nostalgic Look Back at the Early Coaches of FMCA, moderated by Mike Middaugh, F3456.  Mike is yet another member of the Great Lakes Converted Coaches chapter that we also belong to.  Mike was joined by several other vintage converted coach owners who shared photographs of buses from the 1940’s, 50’s, and 60’s, some of them buses they had owned.

We then walked over to Louise and Craig’s motorhome, a very nice 38′ Monaco Dynasty.  We had our respective lunches and a great chat as we got to know fellow members of our FMCA Freethinkers Associate Chapter.  The service tech from HWH showed up around 2 PM to fix their slideout, so we took that as our cue to return to the vendor area in search of more knowledge and solutions to problems.

After some further discussion with the folks from A-1 Water Treatment we decided to purchase one of their water softeners with attached pre-filter.  It was both heavy enough and bulky enough that we arranged to have them deliver it to our coach after the vendor area closed today.

We then stopped at the WiFiRanger booth and purchased a WiFi Ranger Mobile Titanium (WFR-MT) and optional AC power supply.  (The Titanium version is identical in functionality to the standard version except for a metal case in place of a plastic one, and a 5-year warranty instead of a 1-year warranty.)  The WFR-M/MT device mounts outside the coach and combines a WiFi “booster” (transceiver) and a WiFi router.  The booster communicates with available Wi-Fi signals that can serve as on-ramps to the Internet.  These signals originate somewhere beyond our coach and are paid for, and controlled by, someone other than us. These can be public/open (unsecured) or private/closed (secured).  Use of a secured signal requires the correct authorization (password).  Public/open networks are, by definition, free to use as you do not need a password to connect to them.  Secured networks may be free, such as at some businesses, or there may be a charge, as in airports, and some hotels and campgrounds.  There is an extensive system of public/open WiFi access points available at the CAM-PLEX, sponsored by WiFiRanger.  It has been very good around the Wyoming Center, but varies out in the Boxelder RV Park.  The booster allows us to receive this weak signal, use it, and send a suitably strong signal back.  It does not, however, guarantee on-demand, robust access, as this is also a function of how many other stations are trying to access the system at the same time.

The router section of the WFR-MT generates a secure, local network that we control.  Although it is generated on the outside of the bus, it should be strong enough inside and around the coach to allow us to use our devices wherever we want around our campsite (within reason).  We won’t know this for sure until we hook it up, of course, but the device has been used and well reviewed by other travelers, including Technomadia.  Being a full-fledged router, it not only allows multiple WiFi devices to securely connect to the Internet (via the external WiFi source), but should allow them to securely communicate with each other.  (BTW:  Technomadia has the definitive book on mobile connectivity.  http://www.technomadia.comor Amazon.com)

I plan to mount the WFR to the cable entrance weatherhead with zip ties if it will work.  The device has an Ethernet cable that plugs into a POE (Power Over Ethernet) power supply.  The front cable entrance weatherhead opens into the cabinet behind/above the drivers head where a 19″ CRT TV was once housed.  It comes with a DC power adapter, but we purchased the AC power adapter as there is already AC power in this cabinet that is supplied from the inverter subpanel.

Our Verizon 4G/LTE MiFi 5510L Jetpack device does essentially the same thing as the WiFi-M, except it communicates with Verizon cell phone towers instead of external WiFi sources.  We will be using the Wi-Fi Ranger when possible, and the Verizon 5510L otherwise (assuming it has a usable signal).  This means we could have two different WiFi networks running simultaneously.  The upside to this is that we could have multiple devices accessing the Internet through different pipelines, resulting in faster data transfer.  The downside to this is that devices on one network can’t communicate with devices on the other one.  (We could solve that problem with a WiFi Ranger GO.)  Although interference between the networks is possible, it is unlikely.

We needed an additional length of hose to hook up the new water softener when it arrived, so Linda picked up a 10′ long food grade hose from the Camco booth.  She then returned to the coach to straighten it up for a visit later from Louise & Craig while I went off to the Great Lakes Area Motorcoach Association (GLAMA) gathering at 3:15 PM.

I attended the Great Lakes Area Motorcoach Association (area) meeting in the late afternoon.  The main items of interest at the GLAMA meeting were the upcoming GLAMARAMA in mid-September 2013 and the 2014 GLAMARAMA planned for next June.  Both rallies will be at the Elkhart County Fairgrounds in Goshen, IN.  After that the intention is to move it around through Michigan, Indiana, Ohio, and Ontario (Canada), perhaps doing two consecutive years in each state/province.

On the walk back to the coach I had a long, technical conversation with Michele Henry of Phoenix Paint in Edwardsburg, Michigan regarding how to remove and reinstall the broken searchlight on the front roof while minimizing damage to the paint.  Michele’s shop did the roof repair and repaint on our coach, and she always has a good sense about how to approach something like this.  She talked me through the best way to approach it, and after considering the process carefully, I decided to defer an actual repair until we can get the coach back to her shop.

Louise & Craig came by around 5:30 PM and we continued our conversation over snacks and some Red Ass Wine from the Prairie Berry Winery in the Black Hills of South Dakota.  The new water softener got delivered just as they showed up, so hookup was deferred until later.  We put out the Blue Diamond Wasabi Soy almonds, and I think they caught Louise by surprise.  (Sorry Louise.  We really should warn folks about these.  If you like almonds, and you like spicy, you will find these addictive.)