Tag Archives: Panera (Brighton MI)

2016/04/21-25 (R–M) Bad Brakes & More

Leave a reply

2016/04/21 (R) More Bad Brakes

[NOTE:  There are no photos for these posts.]

We were up before 8 AM, had coffee in the living room by the warmth and glow of the fireplace, and had fruit for breakfast around 8:45 AM.  We left at 9:40 to take my car to Brighton Honda for its 110,000 mile service appointment at 10 AM.  Linda followed me in the Civic to drive me back to the house but as long as we were that close to Brighton we decided to go to the Verizon corporate store.  To our surprise, the store was permanently closed.  We were pretty sure there was still an “authorized retailer” a little farther down on Grand River Avenue (which never made any sense to me) but after the authorized retailer in Arcadia, Florida was unaware of the Mi-Fi device I was interested in (AC791L) I really wanted to talk to someone in a corporate store.

We did not investigate further as to whether the store had been moved and, not having any other business in Brighton, we headed home.  On the way I got a phone call from our State Farm insurance agent’s office about a long-term care premium that was due last month.  Apparently one of our children did not recognize it was a bill when they checked our mail and did not alert us to its presence.  It wasn’t a big deal, and Linda took care of it when we got home.

I started a load of laundry and settled in to work at my desk.  I did not have a reply yet to my support ticket for our WiFiRanger.  I checked-in to RVillage and saw that our member status had been upgraded to GOLD.  I did a search for used tractors and was researching a portable water deionizing system at AutoGeek.com when I got a call from Curtis Coleman of RVillage.  While Curtis and I were talking I got a call from Gary at Brighton Honda.  He left a message and I called him back.  The rear brake rotors and pads on my Element needed to be replaced.  It seems we have not been able catch a brake break in the last six weeks.

Linda made a haircut appointment with Renee for tomorrow at 10 AM but got a call back from Renee that she was not working tomorrow.  Renee had an opening at 1:15 PM today so Linda took that instead.  It was already noon so Linda heated a can of Amy’s Chili and we split that for lunch along with some fresh black grapes.  We left at 12:40 PM for the drive to Twelve Oaks Mall.  I went along because I wanted to stop at the corporate Verizon store in Novi.

I don’t usually go along with Linda to her haircut appointments since she now cuts my hair at home, but it was good to see Renee again.  She did a nice job with Linda’s hair and we were out of there in under 30 minutes.  For many years the Verizon store was located on the Twelve Oaks Mall property near Twelve Mile Road but it recently moved, so we put the address in the GPS unit.  The new location was nearby on Novi Road just the other side of I-96 from Twelve Oaks and West Oaks Malls.

We were assisted by Christina, who was both knowledgeable and helpful.  We went in thinking we might upgrade both of our phones and our Mi-Fi device and increase our data plan.  I was interested in the AC791L Mi-Fi device.  They did not have one in stock but she knew what it was and said we could have one delivered to our house on Monday via FedEx.  We then looked at phones and Christina steered us towards the latest offerings from Motorola.  We selected one for pricing purposes and she worked up the costs, including a higher data plan.

The new phones would have each cost $26 a month for 24 months, and the extended warranties would have been another $11 each per month for as long as we cared to pay it.  The phones had some nice features—specifically a shatterproof screen, wireless charging, and a screen-facing flash (for those all-important selfies)—but $74/month ($37 x 2) for two years seemed like a lot of money to us, especially given that our Samsung Galaxy S3 phones still work just fine.  Another negative for us is that the new phones are also bigger and we like the size of our S3’s.  Besides, I have a belt clip flip-top soft case for mine that fits nicely and works well.

Offsetting the increased phone costs was the fact that the line charges for our phones would drop from $40 per month per line to $20 per month per line.  Also, the $80 we currently pay for 10 GB of shared data per billing cycle would now buy us 12 GB of data for the same time period.  Finally, upgrading the phones would get us an additional 2 GB of data per phone per billing cycle for “life”, so our 12 GB plan would actually be 16 GB.  We would lose the bonus data, however, if we ever reduced the monthly gigabytes on our plan.

In looking at the cost worksheet I noticed that for $100 per billing cycle we could get 18 GB of shared data and bump that up or down at will without losing anything.  In the end we bought the AC791L Mi-Fi device for $90 ($100 with a $50 rebate and a $40 activation fee), changed the data plan to 18 GB for $100 (per billing cycle), and decided to keep our current phones.  Ignoring the one-time charges connected with the new Mi-Fi device we increased our monthly data from 10 GB to 18 GB, got a new/better Mi-Fi device, dropped our monthly cost from $180 to $160 (before taxes), and were not locked in to anything.  Christina also said to keep our eyes open for special deals on phones, especially around Mother’s Day and Father’s Day.  Roger that, and will do.

By the time we got back to I-96 and Grand River Avenue (GRA) in Brighton it was 3 PM so we stopped at Brighton Honda to check on my car.  While waiting for parts the technician got shifted to another job so my car was not ready yet.  Making a left out of the dealership onto GRA is always difficult and can be impossible in heavy traffic.  Our solution is often to turn right and go to Panera on GRA just south side of I-96, which is exactly what we did.  They did not have any decaf brewed but were happy to make some for us.  It had been cool and overcast all day so we sat by the gas fireplace and enjoyed several cups of coffee.

While we were sitting there I took a minute to call Philip Jarrell and let him know we were back in town.  We discussed the French drain he installed at the west end of property last fall, which seemed to be working well, and the trenching on the other side of the road, where the culvert empties, which had become a small pond.  I mentioned that the new driveway and RV pad looked nice, and that I really wanted to get the ham radio tower erected this year.  That project would require his services for a morning.  By 4:15 PM I had not heard anything further from Gary at Brighton Honda so we drove home.

Gary called at 5 PM to let me know the car was done and the technician was test driving it to make sure everything was correct.  The dealership was open until 8 PM, and we did not want to fight rush hour traffic, so Linda fixed dinner.  We had a salad of arugula and Italian kale with slivered almonds and dried cranberries, microwaved sweet potatoes, and vegan Italian sausage.  Everything was very tasty and I particularly liked the spices in the mock sausage.  Linda tries to make our diet primarily plant-based whole foods, but not having been vegans for most of our lives we find a certain satisfaction (comfort) in the occasional veggie burger, soy hotdog, seitan stroganoff, or other “mock” dish.

After dinner I hung up some laundry and started another load in the washer.  I checked e-mail and had one from my niece Amanda.  She and Ryan were looking at Wednesday, September 27, 2017 as a wedding date and wanted to know if all of us could make it to Hermann, Missouri for the event.  I replied that it would not be a problem for Linda and me and cc:d Brendan and Meghan.  I then texted both of them to alert them to the e-mail.  I also had an e-mail from Kate de Fuccio wanting to know when we expected to be back in Michigan.  I let her know we were back and had gotten preoccupied with opening the house and unloading the bus, but I felt bad that I forgot to text her as soon as we were home.

I also had a reply to my WiFiRanger support ticket requesting that I send screen shots of three of the tabs in the control panel.  I replied that I would try but did not mention that I really wasn’t sure how to do that.  Linda (the Google Queen) suggested that I “Google that” so I did.  It turns out that “alt+prtsc” captures the current window as an image and copies it to the clipboard.  From there you can do what you want with it.  Easy breezy.  (I subsequently ended up with something called “Easy Capture Manager” on my computer that just requires me to push the “prt sc” key and then lets me select what I what to capture.)

By 6:545 PM we were headed back to Brighton Honda to retrieve my car.  Linda dropped me off and returned home.  I paid the bill and returned home a few minutes later.  Thursday night is CBS comedy night and by 8 PM we were ready to just sit and laugh.  But first I had to transfer some of the laundry from the washing machine to the dryer.  I worked on blog posts while being entertained and hung up the dry laundry before going to bed.

2016/04/22 (F) Networking

I was up a little later than usual last night and would have slept in this morning but the cats had other ideas; they always do.  We were up by 8 AM and I made a pot of the Costa Rican Terrazu half-caff coffee that we bought yesterday at Teeko’s Coffee and Teas.  We were both still a little tired, and the thick fog further subdued our moods.  We countered that by treating ourselves to an easy start to our day enjoying our coffee in the living room to the warm glow of the fireplace.

We eventually got dressed, had breakfast, and got on with our day.  Linda got a call from Bill, who handles computer and networking technology for the bakery, and he walked her through the VPN setup for the bakery’s upgraded server.  She then made a grocery list and went shopping.  When she returned I discovered two boxes on the front porch.  UPS had obviously been here without my being aware of it.  The large box was the Instant Pot Linda ordered the other day and the small box was my prescriptions, which I was not expecting to see for another week.

My main focus for the afternoon was dealing with networking issues.  I uncoiled a long Cat 7 Ethernet cable that I found in the ham shack yesterday.  I unplugged the network cable for Linda’s computer from our AT&T gateway/router and plugged in one end of the Cat 7 cable in its place.  I took the other end of the cable into the bus, plugged it in to the HP Color LaserJet 3600 printer, and turned the printer on.  I brought my laptop computer upstairs, connected it wirelessly to the gateway, and tried printing a simple Word document without success.  I checked the printer settings and the TCP/IP addressing mode was configured for a manual address that did not match the address range of our home network.  I reconfigured it for DHCP and it acquired a new IP address in the correct range.  I tried printing again but it still did not work.  I reconfigured the address in the printer device properties on my computer and was finally able to print.  That was a relief as we would really like to leave this printer on the bus and have it networked rather than operating from a USB cable.

I then turned my attention to the WiFiRanger Mobile Ti (WFR-MTi).  I took my computer to the bus so I could use it to control the WFR and capture screen shots.  I was able to connect it to the WFR without difficulty but the WFR could not “see” (detect) any external Wi-Fi signals even though it is on the roof outside the bus and my computer could see them from inside the bus.  Back in the house I plugged in the Amped|Wireless SR20000G Range Extender / Router and configured it to repeat the AT&T gateway which does not broadcast a very strong signal.  Back in the bus my computer could see the strong signals from the Range Extender but the WFR still could not detect any external Wi-Fi signals.  I captured the screen shots for the MAIN, WIFI, and SETUP tabs, as requested by technical support at WiFiRanger, and pasted them into Word documents for uploading to their support system.

I took my computer back to my basement office and cabled it in to the network switch.  I wrote a reply to the WiFiRanger tech support thread, attached the screen shots, and posted it.  Clearly the WFR is not working and I am certain I will end up requesting an RMA and returning it for service, probably sooner than later, but I wanted to start with the online tech support system in case they had any good ideas that had not occurred to me.

Linda spent the afternoon getting acquainted with the Instant Pot and running it through its test procedure.  It checked out as fully functional so she used it to prepare seitan stroganoff for dinner.  I laid down at 5 PM and napped for an hour, finally getting up at 6 PM when Linda put our dinner salads on the table.  She served the stroganoff over brown rice with a side of steamed broccoli and the whole meal was wonderful.

We sat in the living room until 8 PM and then decided to watch Sleepless in Seattle on PBS.  I had forgotten what a good movie it is and enjoyed seeing it again.  Linda fell asleep right after the movie ended and I watched Episode 6 of Ken Burn’s JAZZ before calling it a night.  Like all of Ken Burn’s documentaries, JAZZ is a masterpiece of historical storytelling.  At some point I would like to watch all 10 episodes back-to-back.

2016/04/23 (S) Ham & Eggs

Today was our first Saturday back home, and that meant it was also our first opportunity to have breakfast with our fellow amateur radio operators (hams) from the South Lyon Area Amateur Radio Club (SLAARC).  Before going to sleep last night I set wake-up alarms for 7 AM this morning, but I was awake before then and had time to grab a quick shower before getting dressed.  I also took a few minutes to reattach the ham radio antenna to the magnetic mount on my car and reinstall the ICOM IC-2820 radio control head and microphone.  Even so, we were still on our way by 7:30 AM and arrived at George’s Senate Coney Island on the north edge of South Lyon around 7:50 AM.  During the drive I was part of a group chat with Steve (N8AR), Mike (W8XH), and Bill (W8NN), who was on an HT while riding with Larry (K8UT).  The Yaesu Fusion repeater sounded good and it was good to be on the air again with friends.

Besides our coffee, dry toast, and dry English muffin, Linda and I split a fresh fruit plate.  It was OK at best, but we don’t go for the food.  It was good to see and talk to folks in person and to be back into this part of our “at home” routine.  Today was testing day so a few people left to run the testing session, but most of the group, which numbered 19 people, stayed until 10 AM.

There was an accident this morning on westbound I-96 just east of the US-23 interchange.  It was still being cleared when we drove home so we got stuck in a traffic backup that could easily have been avoided.  Fortunately we did not have to be any particular place by any particular time and worked our way slowly through the congestion.

Back at the house I worked at my desk while Linda started cooking black beans in her new Instant Pot as she wanted to use some on a salad for our lunch.  Normally she would have to soak dry beans overnight and then cook them for quite a while, but the Instant Pot, which can function as a pressure cooker, took them from bag-to-plate in 45 minutes, during which time Linda went for a walk.  Pressure cookers can be very useful.

Once we got back to our house my initial task was to proofread and markup corrections to my article in the latest draft of the June 2016 issue of Bus Conversion Magazine.  Once that was done I uploaded the PDF to a folder in my Dropbox and e-mailed Gary and Jorge that it was there.  Next I checked my WiFiRanger support ticket and discovered that my reply yesterday, with screen shots attached, did not post correctly.  I replied again and this time it posted correctly, or at least appeared to.  With that task taken care of I copied a few images from the Sony a99v camera to my computer.  I then started transferring files from my computer to the NAS that we had with us in the bus.  I was about to start copying files for from that NAS to the older one we left at home when Linda called me up to lunch.

She made a large salad for each of us with tomatoes, blueberries, sliced strawberries, black beans, slivered almonds, and dried cranberries with a balsamic vinaigrette dressing.  She also made some hot tea after lunch which we took to the living room.  Both of us were tired and by 2 PM laid down and took naps.  It was 68 degrees F in the house but it felt very cool.  I think winters in Florida and Arizona have reset my comfort zone from 70 degrees F, plus or minus, to 78 degrees to 80 degrees F.  Jasper found a sunny spot on the floor by one of the living room windows and Juniper curled up with me.  I got up at 3:15 PM and took my iPad out on the deck to work in the crisp air and warm sun.  Linda came out around 3:45 PM but decided it was too cool and went back inside; I did the same around 4 PM.

Linda arranged for us to meet John and Diane Rauch at Camelia’s Mexican Restaurant at 6 PM.  Camelia’s is walking distance from our old house, but we never walked there because the route was not pedestrian friendly.  It’s a half hour drive from where we live now.  I reinstalled the cellular booster in my car and we left at 5:20 PM to leave a little extra time in case we encountered traffic problems.  And sure enough, we did.  The right lane of eastbound I-96 was closed where it ties in to southbound I-275 as the right lane continued to be closed for a construction project.

Our children’s grade school vocal music teacher, Jennifer Davidson, (who moved here from Tennessee) once remarked that Michigan only has two seasons “winter and road construction.”  Truer words were never said.  We stayed to the left, because that’s what we had to do to get onto eastbound I-696.  Although traffic was slow it was moving, unlike the right hand lanes trying to stay on I-96/I-275.  Vehicle speeds returned to “normal” once we got past the split, which around here is 5-to-10 MPH over the maximum posted limit, and a few minutes later we exited the freeway at Orchard Lake Road.  This is the same exit we used for 35 years to get to our house, and I have undoubtedly used this exit more than any other Interstate highway exit in country.  It was familiar, yet strange, as we rarely get back here anymore except to visit with John and Diane, meet someone at Camelia’s (or one of the other many restaurants that can be accessed from the Orchard Lake Road exit), or go to our optometrist or veterinarian, both of whom are two to three miles south of this exit.

We had our fill of chips and salsa and split an order of vegetarian fajitas.  They were OK, and much better than the ones we had a week ago at Mi Camino Real in Logansport, Indiana.  After dinner we went to John and Diane’s house, which is very close to the restaurant, and continued a nice conversation in a quieter setting.  By 9:30 PM we were all tired and started wrapping up our visit.  We left a little before 10 PM, got home at 10:30 PM, and went right to bed on stomachs that were still very full.  WTVS (Detroit PBS) was fundraising around an early Rolling Stones performance that did not grab my interest so I watched Lidia’s Kitchen and the beginning of Martha Stewart’s Cooking school.  She was filleting fish so I turned the TV off and went to sleep.

2016/04/24 (N) Family

We went to bed on full stomachs last night and I did not sleep well, suffering from indigestion for much of the night.  I should have used a second pillow and tried sleeping on my back with my head elevated, but that is not a natural sleeping position for me and I doubt that would have slept any better.  To compensate for the poor sleep I stayed in bed and kept falling back to sleep.  Linda was up way before me, having apparently slept better than I did, and I finally got up to stay at 9 AM.  That was unusually late for me, but at least I felt somewhat rested.

As soon as I got up Linda sliced oranges for our breakfast and prepared to toast bagels while I prepared our morning coffee.  We were not quite done with our preparations when I got a phone call.  It was from Chuck Spera so I answered it.

Chuck and I talk frequently but not usually at 9:30 AM on a Sunday morning.  He and Barbara were on the road and had just crossed into Kentucky on I-75 having left Sevierville, Tennessee early this morning.  Before pulling out this morning Chuck had noticed a little oil by the driver side tag axle during his walkaround, specifically in the holes of the Alcoa aluminum wheels.  He had removed the decorative hub cap and found an oil film there as well, but did not see any pooling.  He assumed that an axle seal was leaking a little but was not sure how to check the oil level in the hub or add oil if needed.  Because of both past and recent experiences, Chuck figured I would know the answers to both questions.  While that was probably unjustified optimism, in this case I did, and gladly shared what I knew about the sight glass and rubber plug in the wheel hub for the oil reservoir.

We had just finished our bagels and orange slices when Brendan texted Linda to see about plans for today.  We had all planned on getting together at Meghan and Chris’ house this afternoon to visit and have dinner but Madeline had come down with Hand, Foot, & Mouth disease (a virus) earlier in the week and Brendan thought he might be getting it too.  Given that Linda had not yet fully recovered her hearing we agreed that it would be best to avoid contact until we knew that no one was contagious.

Madeline was understandably disappointed that she would not see us today and, in lieu of that, requested a FaceTime session.  We were equally disappointed that we would not get to see her (and her parents) but an hour of FaceTime made up for it a bit.  After our FaceTime session we lingered in the living room by the fireplace enjoying our coffee and doodling on our iPads.  We finally got dressed at noon and left for Meghan and Chris’ house at 12:30 PM.

We arrived around 1:15 PM and were greeted by our daughter with a paper grocery bag full of some of our mail.  We had a long, relaxed afternoon to visit and catch up.  Meghan made vegan burgers from scratch and a salad with beans, corn, red bell pepper, and avocado with a lime-based dressing.  We brought a bottle of Barefoot Red Moscato and I found it very much to my taste (sweet).

We departed just after 7 PM and stopped at the new Gas 2 Go station at the northwest corner of I-96 and Latson Road.  The station was still under construction when we left in November.  I was pleased to see that it is a Shell Oil Company station with a Tim Horton’s.  I have had a preference for Shell gasoline for most of my adult life and Tim Horton’s has coffee on a par with Dunkin Donuts, although I do not like the lids they use.  There is also a traffic signal on Latson at the side road for the station, no doubt because this is also the access road for the Livingston County Road Commission complex.  (Leave it to them to take care of themselves while the rest of rest life and limb to get out of the Lowe’s/Walmart center just south of there.)  Whatever the reason, it will slow down traffic exiting I-96 and heading south on Latson Road, making it easier to get out of the Lowe’s/Walmart parking lots.

We were home a little after 8 PM and turned on the TV to watch Grantchester on PBS and Elementary on CBS.  Around 8:40 PM I realized I had missed the SLAARC Information Net which started at 8 PM.  I need to reestablish the habit of tuning in on Sunday evenings, but that time slot competes with some of our favorite programming on PBS.

2016/04/25 (M) Pick Up Sticks

We had a typical start to our day.  After catching the weather on channel 10.2 we were up by 8 AM, had coffee and granola with blueberries and bananas, and used our iPads in the living room with the fireplace turned on.  Our Kitchen Aid mixer broke last year and today Linda was finally ready to replace it.  She decided to get the slightly larger and more powerful model with the crank up mixing bowl as she wants enough power to mix bread dough.  She also wanted it in white to match most of the other kitchen appliances.  To our surprise the white color was more expensive than red or blue but less expensive than some other colors including copper bronze.  She was trying to convince herself that red or blue would be OK but I convinced her to order white.  All of our appliances (and cabinet knobs) are white.  With Amazon Prime it will be here on Wednesday.

The weather forecast was calling for a cold front to move through our area triggering rain, and possibly thunderstorms, starting late in the afternoon and extending through the evening and into the overnight hours.  The grass in most of the yard is not very tall yet, except right in front of the house by the concrete driveway.  The yard is also moist, but not soggy, and we do not expect Keith to be here to cut the grass for the first time this season until sometime next week at the earliest.  The temperature mid-morning was in the low 60’s and was forecast to reach a high of 72.  All-in-all it was an excellent day to pick up sticks around the yard in advance of Keith’s first visit and get the Honda self-propelled lawn mower out and cut the grass in front of the house.

I started my yard cleanup with area around the front berms, raking small branches out of the grass and stacking larger ones on existing brush piles.  While I was working out front a UPS truck showed up with our Max Burton Induction Cooktop and our new Verizon Mi-Fi unit.  I signed for the Mi-Fi and took the packages inside.  Linda used the induction cooker to make some nectar for our hummingbird feeder and also prepared a batch of homemade granola.  She eventually came outside and helped me pick up some of the downed tree limbs in the back yard.  We got the easternmost two acres (2/5ths of our yard) picked fairly well.  We will work on the westernmost three acres another day.

I got the Honda lawnmower out and topped up the tank with fresh fuel.  Small engine Honda equipment is known for starting on the first pull, but my experience is that this is only true when they are new.  No doubt our lawnmower needs to be cleaned up and tuned up, and would start more easily if it was, but I eventually got it started and once it warmed up it ran fine.  I mowed the little bit of the lawn near the house/driveway that looked like it was overdue for a cut.  This is also one of the only parts of the yard anyone really sees if they pull into the driveway.

I had just shut the lawnmower off and was putting it in the garage when the U. S. Mail truck pulled into the driveway.  It was our mail carrier, Michelle, and she had a very large box for us, along with our typical bundle of Monday junk mail.  The box was not very heavy and Linda informed me that it was the 48 rolls of toilet paper she recently ordered.  Well, alrighty then.

It was approaching 1 PM so Linda made salads for our lunch with the leftover bean-corn-tomato salad (that Meghan made yesterday) on top of a bed of mixed greens.  After lunch Linda took her Amateur Extra flash cards outside to study and I focused on getting the new Verizon Jetpack Mi-Fi (Netgear AC791L) assembled and activated.  Assembly consisted of installing the Lithium Ion battery and back cover.  I decided to charge it for a bit while I read the user guide and activation procedure.

When I was fairly certain I had all of the information I needed at my fingertips I called the 877 activation number and keyed in the requested information.  It took a couple of tries to get it right but I finally did.  With the activation completed I turned the device on, looked up the SSID and Password, and connected my iPad to it.  I then entered the relevant information in a new entry in Passwords Plus.

I got a phone call from Gaye Young and chatted with her at some length about RVillage and its relevance to FMCA.  (Gaye is the FMCA National Secretary and chairperson of the National Education Committee.).   She and husband Jerry are at the Rally in the Pasture at FMCA National President Charlie Adcock’s place in Arkansas (or maybe it’s Alabama?) and I knew from talking to Curtis Coleman last week that he was on his way there too.  A year and a half ago the NEC researched and recommended that FMCA partner with RVillage and a year ago the FMCA executive board accepted and endorsed that proposal but then nothing happened.  The FMCA Executive Director was recently let go and Charlie is now trying to get the RVillage train back on the tracks, along with lots of other things as FMCA continues to loose members at an alarming rate.

I suspect that the loss of members is a combination of several factors.  For one, the median age of FMCA members has been in the upper 60’s for quite some time.  That means a certain number of members are “aging out” almost daily.  For another, the downturn in the economy in 2007 was particular hard on the RV industry.  Not only was the industry slow to recover, when it did it was building mostly towables, not motorhomes.  In the past many RV dealers basically “included” an FMCA membership with the purchase of a motorhome, or at least provided information about the Association and an application form.  Another possible factor is that RVers under 50, including Gen-Xers and Millennials, don’t tend to join things.  FMCA is not the only organization suffering membership decline and having difficulty attracting new members, especially younger ones.

Chuck and Barbara got home yesterday and were settled enough for Chuck to call me at 5 PM and update me on their hub oil leak.  Linda made salads for dinner and reheated the brown rice and seitan stroganoff.  After dinner I replied to an e-mail from Gaye and then settled in to watch TV with Linda.  And so it goes.

 

2015/09/13 (N) Club Business

Leave a reply

Linda is still fighting her cold and I was up way too late last night so we slept until 9 AM this morning.  Because we were getting a late start, and neither of us was hungry, I made coffee but we skipped breakfast.

It was 51 degrees F in the bus so I turned on all three electric toe kick heaters and put on my zip front sweatshirt that I use to work in cool situations.  We took all of the freezer packs out of the house refrigerator freezer compartment and moved them to the freezer compartment in the bus fridge.  Linda also filled four large containers with water and snapped the lids on.  We put those in the refrigerator compartment on the bus, turned on the power, and put the wireless remote thermometer in the freezer compartment.

I was going to raise the front of the refrigerator until the top hinge for the freezer door just touched the ceiling of the alcove but our relatively inexpensive model apparently lacks that adjustment.  Linda was also concerned about how we will latch the doors for travel.  She remembered seeing a very clever latch for a fridge with doors like ours at the GLAMARAMA rally in early June and found a picture of it on her phone.  It is actually fairly simple and if custom made could be installed using the holes for the center hinge (between the doors) on the handle side (right side) of the fridge.

(I still like Scott Bruner’s solution best.  He devised an electromagnet system that is activated by turning the ignition on but has an override switch.  He and Tami have a cafe door, bottom freezer drawer unit.  One electromagnet holds plates on top of the cafe doors where they meet at the center of the fridge.  A second electromagnet is mounted on the right side of the lower case and holds a plate on the side edge of the freezer drawer front.  Very clever, and very fail safe.)

Bruce installs the fixed side of the piano hinge to the top of the wiring chase above the OTR HVAC duct.

Bruce installs the fixed side of the piano hinge to the top of the wiring chase above the OTR HVAC duct.

Our first construction task for today was to finish installing the built-in sofa.  This was a semi-permanent installation with everything in its final place and screwed in.  We will have to disassemble it once to finish cutting it and screening off the openings in the OTR HVAC duct and to drill the 4″ diameter holes in the vertical front panel for the circular registers.  We also need to find a pair of suitable length lifts to support the seat in the open position.  Finally, we need to find and mount some 12V DC LED lights and replace the momentary contact switches in the aft end cabinet with on-off versions.

It took us until 12:25 PM to finish the sofa (for now).  We took a brief break and had an apple for a snack.  Our next task was to put the plywood bed platform back in the coach.  That sounds simple enough but we knew from taking it out that it would be difficult to put back in.  The platform is the size of a queen size mattress, in two sections joined by a piano hinge.  It’s big, bulky, and very heavy, with no good handholds but we managed to get it into the bedroom and setting flat on the storage box base.

The physically hard part was behind us but now we had to get the fixed part of the platform screwed back down to the base, requiring us to put 18 screws back in the holes they came out of.  I rewired the aisle lights before we did that as I was easier to get to the wires.  We used two screws to index the location, checked the reveal along the length of each side, and screwed it down.  I then reconnected the two gas springs while Linda held the platform up.  I also connected the wiring for the two cargo lights but they did not come on.  I will have to change the bulbs and see if that’s the problem but for now we had more pressing tasks.

A view from near the co-pilot/navigator seat of the built-in sofa with the hinged seat base lifted up to reveal internal pieces and storage space.

A view from near the co-pilot/navigator seat of the built-in sofa with the hinged seat base lifted up to reveal internal pieces and storage space.

We went inside, each had an apple, and then returned to the bus.  I had planned to temporarily mount two 12V DC switches but did not have time to fabricate a temporary mounting plate.  We needed the switches hooked up so I just reconnected the female spade connectors on the cable to the spade lugs on the switches and draped the wires over the arm of the passenger chair.

Our next task was to temporarily install the desk.  The installation was only temporary in the sense that we would need to disassemble it to get the Aqua-Hot fan-coil heat exchangers installed in the bases.  My preference was to get the heating system configured as part of the desk installation but we ran out of time before our appointment at Coach Supply Direct.

Our first sub-task was to cut the 1/4″ Baltic birch plywood spacer to fit on the right side of the right pedestal/base.  I cut it to be shorter than the desk and not as deep as the base, which is recessed at the front to create a toe kick space.  I cut the lower back corner out so the space would fit around the HVAC duct / wiring chase.  We peeled off some clear tape from the mirrors in the right rear corner down below the level of the top of the desk and set the spacer in place.

Our next task was to redo some AC wiring to get power to the space between the pedestals and reconnect the passenger side front duplex outlet.  To get power to the interpedestal space I decided to run 2C+G (Romex) cable from the wiring chase through a hole in the bottom of the pedestal, up the inside rear left, and out through a hole in the upper rear left side.  This hole and cable will not be visible unless someone crawls under the center of the desk.

In order to get the cover/shelf in the foot well aligned with the left and right pedestal/base components I decided to use mending plates attached to the back side of the bases and pedestals.  We started with the right hand components.  I attached a plate to the back side of the left rear base projection and one to the underside of the left end of the upper bottom section of the pedestal.  We set the base in place, put the pedestal on top of it, and set the cover/shelf in place.

We carefully shifted the components until we had them aligned the way we wanted.  I then secured the pedestal to the wall (which is 5/8” or 3/4″ plywood not sure which) with a single screw through the back panel centered from side-to-side and a couple of inches down from the top edge.  We double-checked the alignment of the pieces and then secured the pedestal to the base with three screws.  The base is not screwed to the floor or anything else except the pedestal.

We set the left base and pedestal in place and fussed with the alignment for but it was already 4:15 PM.  We had planned to quit working at 4 PM to get cleaned up for our SLAARC meeting and have dinner.  We still have a lot to do tomorrow for me to be ready to leave on Tuesday morning, but it should be manageable.

We went to Panera in Brighton for dinner and both had the Edamame Soba Noodle Bowl.  It was a generous serving that was tasty and filling even though it was only 390 calories.  It was very high in sodium, a common but unfortunate problem with most of Panera’s food, so not something we would eat often.

We arrived at the South Lyon Witches Hat Depot Freight House at 6:30 PM for the monthly meeting of the South Lyon Area Amateur Radio Club (SLAARC).  We had a larger group than usual, at least 30 people.  The business meeting was brief and followed by a program by Steve (N8AR) on the Yaesu Fusion technology.  Steve and several other club members brought different radios to demonstrate and let the attendees try.

We left in time to get home by 9 PM and watch an episode of Sherlock on Detroit PBS, followed by Rick Steve’s Europe and then Music Voyager.  We’ve been working long, hard hours and it was nice to take an evening to relax and do something other than work on the bus.

 

2015/09/05 (S) Building the Built-in

Leave a reply

We set the alarm for 7 AM as we had to return the 100 pound floor roller to The Home Depot by 8:08 AM.  We got the roller out of the bus, reattached the transport wheels, and loaded it into the back of my car.  We positioned it so that Linda could hold on to the handle while I drove.  One-hundred pounds that is designed to roll is not something you want loose in your car.  We got to the store at 7:40 AM but the associate was busy renting a ditch digging machine to someone.  We had to wait 15 minutes but that was OK.  After returning the roller we drove back to the house so Linda could get her car and our iPads and then drove separately to Panera in Brighton.

Linda had her usual Everything bagel and I had my usual Cinnamon Swirl & Raisin bagel, both sliced and toasted with nothing on them.  Two large coffees rounded out the order.  The coffee was hot and did not have grounds in it (for a change).  For some reason we got an extra Everything bagel that we did not order so which we split it.

Linda left at 9 AM to drive to Ann Arbor to pick up grand-daughter Madeline who will be with us until sometime on Monday.  Her mom and dad are attending a wedding on Sunday in Madison, Wisconsin so they are driving over today and driving back on Monday.  I stayed at Panera getting my money’s worth of coffee while finishing yesterday’s blog post and starting on today’s missive.

I left Panera at 9:45 and stopped for gasoline at the Shell station on the way home.  $2.29/gallon.  I would love to see $2/gallon gasoline again.  Better yet, I would love to see $2/gallon diesel fuel.  Linda planned to stop at the grocery store on the way back but I wanted to start a load of laundry and be home when Linda got back to the house with Madeline.

I got the laundry sorted and the first load started and then spent a little time at my desk.  I had to reset a password for someone on the SLAARC website and I logged in I was reminded that WordPress 4.3 was now available.  There were seven other updates available as well; three plug-ins and four themes.  I don’t use any of those themes and should probably delete them, but for now I just updated WP and then updated everything else.  I then logged in to our personal website, the FMCA-GLCC website, and the FMCA Freethinkers website and did the same updates.

While I was in our personal website I cleared out the 104 spam comments that had accumulated since my last house cleaning.  In the Freethinkers website I activated all of the plug-ins except Wordfence.  I have problems with this website and tech support at iPower says it is the Wordfence plug-in that is at fault.  They ask for permission to deactivate it and I give them permission but ask that they only disable that one plug-in.  Instead they disable ALL of them; every time.  I would really like to move this website to QTH.com and I may just do that as an add-on domain to our account.  Unfortunately our e-mail reflectors are set up on through the iPower account and I doubt that the club will want to pay for two different web hosting services.

It was a nicer day than we have had for most of the week, cooler with clearer skies and a nice breeze, so I opened up the windows in the motorcoach and turned on all three ceiling exhaust fans to air out the interior and get rid of the lingering smell from the floor tile adhesive.  (Yes, that is one, long sentence, but since I have added this one, it is now a proper paragraph rather than a single sentence paragraph.)

Linda and Madeline stopped at the Whole Foods Market in Ann Arbor, which is not far from our son and daughter-in-law’s house, and got to our house at 11 AM.  Madeline and I helped Grandma Linda unload the groceries and put them away.  I moved a few things from the front hallway into the library where Linda put most of the bus drawers last night (three of them are in our bedroom).  Madeline wanted her inflatable porta-bed set up so Linda took care of that.  Once her bedroom was arranged we got out her toy box and started playing with things.  She also had a couple of bags of things she brought with her and got a small soccer ball out of one of them.  We had a great time throwing and rolling it around the living room.  It is always wonderful to see the pure joy of a young child at play doing something as simple as this.

By 12:30 PM Madeline was ready for lunch so Linda made a PB&J sandwich and washed some green grapes.  She washed some black organic grapes for us and I had a few pretzels dipped I Sabra Roasted Red Pepper Hummus.  It’s my favorite hummus from them, or pretty much anyone else.

After Madeline laid down for her afternoon nap at 1 PM Linda and I both got busy with chores.  As much as I would like to have taken today off, at least from hands and knees work, we only had eight days left to get some significant tasks accomplished on the bus.  In terms of a critical path view of the overall project the critical task is grouting the floor tile that we finished installing at 9 PM last night.  Not only will it take some time to do but once it is done it cannot be walked on for 24 hours.  As much as it needed to be done, however, I needed a day of not being on my hands and knees.  If I get it done on Sunday I can resume work inside the coach on Monday.

While Linda made a batch of granola I worked on assembling some of the pieces for the built-in sofa.  My plan was to fully assemble the two plenum boxes that will support the ends of the plywood seat, and I intended to do that by gluing and screwing the four pieces together for each.  In order to do that I needed screws of the appropriate type (#6 SR) and length (1-1/4″) so I went to Lowe’s to get them.  While I was there I looked at continuous hinges and angle brackets but did not buy any.  I need a 72″ hinge but all they had were 48″, 30″, and 12″.  I may be able to use two 30″ and one 12″ but I need to check the actual dimension.  I also needed a #6 drill but with an integral countersink but Lowe’s did not seem to have what I needed so I went to The Home Depot and found something there.

I think this marking scribe belonged to my mother’s father.

I think this marking scribe belonged to my mother’s father and is at least 100 years old.

Back home I was getting all of my tools and supplies ready when I realized that I would not be able to attach the plenum/support boxes to the adjacent cabinets if they were fully assembled.  This was an example of incomplete design; either I have forgotten how I planned to anchor these boxes, changed my thinking about this in the time since I did the design work, or never figured out this detail in the first place.

Ideally I could anchor them in a way that does not destroy the cabinets or the floor.  One way to accomplish that would be to attach them to the HVAC plenum at the back and the vertical front support board using angle brackets, and to the top of the wiring chase above the HVAC plenum via the two filler strips on either side of the seat.  If I do that I can fully assemble the two plenum/support boxes before installing them.

For now I only assembled half-boxes with one side piece attached to the bottom piece and the other side piece attached to the top piece.  I built one of them for the left end and the other one for the right end. What this leaves open as an option is screwing the side/bottom assembly to its adjacent cabinet and then screwing the other assembly to the first one without using any glue.  The dry assembly would allow everything to be disassembled later if needed.

Madeline was up by this time and helped Grandma Linda put the new seed block in the bird feeder.  They then walked around to the front of the garage to see what Grandpa Bruce was doing.  I showed them my tools and the pieces of wood and explained how everything was going to work and fit together.

Two pieces of one of the plenum boxes held at right angles for gluing and screwing.

Two pieces of one of the plenum boxes held at right angles for gluing and screwing.

I aligned the pieces being joined, which are all 3/4″ cabinet grade 13 ply plywood, using two corner clamps.  I then scribed a line 3/8″ from the edge of the piece that was sitting on the edge of the other piece.  I marked screw locations every two inches with the spacing centered along the line.  I drilled pilot holes with countersinking to ensure the screw heads would be below the surface of the wood.  I disassembled the two pieces, leaving the piece that the screws would go in first in the clamps, and sanded off any rough edges.  I ran screws part way into each hole so the tips protruded just enough to put the two pieces back into alignment when they were rejoined.  I applied Titebond II wood glue to the edge piece spread it out, and wiped off my finger with a wet cloth.  I inserted the edge piece back into the clamps, used the screws to make sure it was aligned, tightened the clamps, and ran the screws most of the way down.  I then loosened the clamps holding the edge piece and drew it up tight by running the screws all the way down.  I used a wet towel to wipe off the excess glue that was squeezed from the joint and set it aside to dry.  I took a lot of pictures too.

The center portion of the storage space under the seat will have an elevated platform with closed ends to create a plenum for the OTR HVAC return air.  I assembled the two end pieces to the ends of the platform using the same method I used for the plenum/support boxes.  There is also a support piece for the middle of the platform but I cannot use the clamps to hold it in position relative to the platform so I will have to do something else.  I was thinking that I did not feel like tackling that task when Linda and Madeline came back to the garage to let me know it was almost time for dinner.  Saved by the food bell, I closed up the garage and went inside to eat.

Linda set out some carrot slivers, diced peaches, and home grown cherry tomatoes.  She cooked some mock chicken patties and heated up some vegan gravy to go with them as a main course.  For sides she heated black beans, edamame, and vegan Mac-n-cheese.  We all enjoyed our meal.

Madeline really enjoys the swings at the Brighton Mill Pond Imagination Station Playscape.

Madeline really enjoys the swings at the Brighton Mill Pond Imagination Station Playscape.

Our son let Linda know that Madeline had not been sleeping through the night recently and had developed a sensitivity to noises.  Linda figured Madeline might sleep better if she engaged in some vigorous play after dinner and suggested that we go to the Brighton Mill Pond Imagination Station Playscape.  Ms. M liked the idea but wanted to make sure I was coming too.  I found a reasonably good parking spot and pushed her over in the stroller because she does not like to walk for the sake of walking.  But once we got to the playscape she was in “go mode.”  As the sun set and the light faded we strollered her over to Jack’s for a scoop of vanilla ice cream with sprinklers.  We then strollered her back to the car and drove home.

Linda had promised Madeline that she could watch a video before she went to bed.  She had selected an episode of Daniel Tiger, an animated children’s program based on the Daniel Striped Tiger character from the old Mr. Rogers TV program.  We had Shawna’s iPad with access to her Netflix account but the program was downloading slower than molasses poured on a cold day.  We had problems with video, then audio, but eventually got it to work after I turned off the Wi-Fi transceiver on my smartphone.  Linda got Madeline ready for bed while fiddled with the technology.

After the video Grandma Linda carried Ms. M around to look at all her favorite artwork, a bedtime ritual that goes back to the first time she ever stayed at our house overnight.

 

2015/08/21 (F) Have Fridge Will Travel

Leave a reply

I was up at 7:40 AM and made a pot of Costa Rican half-caff coffee.  Linda was up just before 8 AM and washed off some fresh blueberries to put on our breakfast granola.  The Costa Rican is definitely not our favorite coffee and I brewed it with a little too much water which did not improve matters.  But we bought a pound of beans and are not going to throw them out so the sooner we use them up the sooner we can get something that we like.

Harvey Carter (AC8NO), the current President of our South Lyon Area Amateur Radio Club, agreed to help us move the old bus refrigerator from Chuck’s shop in Novi to our house this morning using his cargo van.  He pulled into the parking lot of the shop right behind us at 10 AM.  Chuck and Barb had already left for Oscoda in their bus with their race car trailer in tow.

After opening the shop we had Harvey back his van up to the overhead door.  We brought several lengths of 2x4s planning to use them under the back of the refrigerator but Harvey had two ramps made from 2x12s with a cross piece that spanned the rear bumper.  That looked like a much better alternative to us.  He also had a good hand truck and a ratchet strap.

We decided to truck the unit from the left side because the refrigerant and water lines protrude beyond the back of the case.  We removed all of the trays from the doors and cabinet but left the shelves in place.  We slid the hand truck under the left side of the cabinet and secured it with the ratchet strap.  With Harvey on the hand truck we tilted it back and rolled it out to the ramps.  We adjusted the ramps so the hand truck wheels would be centered on them.  Harvey then pulled the hand truck up the ramp backwards as Linda and I pushed from the bottom, eventually lowering it all the way down as we slid it fully into the van.  I then closed up the shop.

I rode with Harvey in the van and Linda followed us in the car for the trip back to our house where I had Harvey back his van up to the small garage door.  Reversing our procedure from earlier we unloaded the fridge by rolling the hand truck down the pair of ramps and put it just inside the small garage bay near the door.  We plugged it in and it started running so at least we did not break it.

We wanted to put the drawers and door bins back in but could not get the fresh food compartment door open more than a few inches.  I was able to open it just enough to see inside and determine that at least two shelves had come loose and wedged into positions that prevented the door from opening.  The solution was to remove the door.  I undid the three screws that attach the top hinge to the cabinet and removed it, allowing Harvey to lift the door off of the bottom hinge.  I reattached the two shelves to the mounting rails at the rear of the cabinet.  Harvey then set the bottom door hinge pin back in the lower bracket and held the door while I reinstalled the top hinge.  We will plug it in later next week and let it cool off as it has to be running and cold when DTE Energy comes on Friday to pick it up.

While Linda unloaded the drawers and bins from the car and put them back in the refrigerator I gave Harvey the ham radio tour.  We looked at the antennas on the tower, the cable entry box, and the ham shack with the multiple monitor wall mounted track system we installed.  I then gave him a tour of the bus interior.  Linda was getting ready to go for a walk but I suggested we take Harvey to lunch and agreed to go.  He lives in Green Oak Township southeast of Brighton so we went to the Panera on Grand River Avenue at I-96 as it was in the direction of his house and we all like their food.

After lunch we drove to the frame shop in Howell and picked up the last of four paintings we had framed.  We were pleased with our choice of framing material and the owner, Rick, did a nice job assembling it.  We headed back to Lowe’s and looked at thin paneling materials.  Linda got a shield for the bird feeder that is supposed to keep the squirrels from getting to the seed block and I got a recessed outlet that I am considering using for the refrigerator in the bus.  We stopped at the Walmart adjacent to the Lowe’s but did not find the peanut butter filled pretzels we were looking far.  I needed a battery disconnect for the lawn tractor battery but we did not feel like doing anymore shopping today and returned home.

It was late enough in the afternoon that I did not feel like getting the air compressor out and working on the floor of the bus so I went to my office while Linda went for a walk.  I was going to upload a few blog posts but decided to work on an article for Bus Conversion Magazine instead.

I took photographs of two buses at a pair of converted bus gatherings in Quartzite back in January of this year.  Larry and Carol Hall had a very nice GM4106 at the FMCA Western G.M. Coach rally while Byron and Betty Pigg had a gorgeous Model 15 Eagle at the Eagle International converted bus rally.  Larry and Byron are the presidents of their respective groups and the rallies took place at the same time in adjacent sections of the Quartzsite Marketplace dry camp area.  This campground is near the epicenter of RV vendor activities and only a mile from where we were camped.  Gary Hatt, the owner/publisher of BCM, brought his newly acquired Eagle conversion and had his mobile mechanic drive his MC-9 Moose Creek Motor Cabin, which was for sale.  He invited me over so we could finally meet in person, I could meet a few folks, and photograph the buses.  He knew, in particular, that Larry and Byron were interested in having their buses featured in the magazine and figured I could help make that happen.

I had started articles on both buses right after I photographed them and worked on them a bit back in February but I did not get them finished before we had to leave Quartzsite in early March.  Once we pulled up stakes we were on the move and very busy and I did not get back to them before we got home.  Of course, we got even busier once we got home so new articles for BCM were on the back burner with the gas turned off.  But magazines have lead times with deadlines for each issue, and Gary very much wanted to feature both of these buses before 2016 arrived, so I dusted them off and decided to work on the article about the Hall’s GM4106.

Larry had sent me a brief narrative some months ago and I had started filling in the detailed specifications about the bus and conversion.  I had already selected possible photos for the cover and centerfold as well as the article and post processed some, but not all, of them.  I massaged Larry’s narrative, added an introduction of my own, extracted some additional specifications, and then focused my efforts on completing the post-processing of the photos.

I took a break for dinner and afterwards completed the photo processing.  I then started inserting the thumbnail versions of the images into the Word document and writing captions.  There isn’t really any magic to writing an article; it’s just a specific kind of work.  You string words together into sentences, organized by paragraphs, that tell a short story about something interesting and you illustrate it with captioned photos that are hopefully relevant and technically adequate.  It takes time and energy to do this well, however, and I ran out of both around 10 PM.

 

2015/07/29 (W) Drive Shaft

Leave a reply

I had had a 9:30 AM appointment at Brighton Honda to have a drive shaft replaced and suggested that we just continue on to the Brighton Panera a half mile down the road for bagels and coffee.  Linda never refuses to go to Panera so that is what we did.  The Wi-Fi was out of service but we both bought things to read so we did not care.  We sat in the two comfy armchairs by the fireplace, which was turned on, because the temperature inside was very cool, a frequent problem with this particular Panera store.  We each had a bagel and many refills of our coffee cups and stayed long enough that Brighton Honda called to let me know my car was ready to be picked up.  We left at 12:30 PM and Linda dropped me off to retrieve the ca.

Back home we had the leftover couscous with caramelized onions and the rest of the kiwis for lunch.  Linda finalized her grocery list and headed off in search of food.  I spent the rest of the day and most of the evening working on the design/drawings for the built-in sofa.

Through the course of the day I had QSOs with Jim (N8KUE) on the Novi 440 repeater and with Chris (K8VJ), Steve (N8AR), and Mike (W8XH) on the South Lyon 2m repeater. I also installed an updated driver for the NVIDIA GPU in my ASUS laptop, installed updates on the older Sony VAIO workstation (which still has Windows XP Pro), installed updates on the Linux box, and took time out for dinner (a delicious red lentil potato curry) and dessert (very sweet watermelon).

I went back to work in my office and sent an e-mail to Mike (W8XH) concerning Windows 10.  He replied via the South Lyon 2m repeater.  We had a long chat from 10:10 PM to just after 11 PM that was joined briefly by Steve (N8AR).  There was also a group QSO taking place on the Novi 440 repeater that I listened to in the background.  After I turned the radio off and came upstairs Linda said it appeared that my ham radio transmissions were interfering with our OTA TV signals.  The antennas are on the same tower but the OTA TV antenna is mounted below the Diamond X-50N 2m/70cm vertical ham antenna so I was a little surprised that it would be causing interference.  The vertical antenna has an omnidirectional radiation pattern which resembles a donut sitting on a horizontal surface, so the location directly under the base of the antenna should be a region with very little signal.  Apparently that is not the case and I will eventually have to do something to remedy the situation.  For now, however, the solution will be to not use the radio when someone s watching television.

 

2015/06/25 (R) The Mouse

Leave a reply

Brighton Honda called yesterday in the afternoon to get permission to do additional work on my car.  Since we plan to keep the car for a while, and then perhaps give it to our son, it was the kind of work that needed to be done regardless of the costs.  They called back later to indicate that they would not have it aligned before closing time.  That was fine with us as it would have been inconvenient to impossible for us to get there by 6 PM to pick it up.  Linda told them to call in the morning when it was ready.

The top of the 40-foot tower from the WNW showing all of the antennas and the pulley with the haul rope. The weather had definitely deteriorated from the day before.

The top of the 40-foot tower from the WNW showing all of the antennas and the pulley with the haul rope. The weather had definitely deteriorated from the day before.

It is amazing how attuned we become to routine sounds and how sensitive we are to non-routine ones, even (especially?) while sleeping.  So it was last night that I was suddenly aware that one of our cats was making a repetitive sound that was unusual.  I turned on my flashlight, hoping to not disturb Linda, and got out of bed.  Both cats were hunched down on the floor on Linda’s side of the bed with Jasper in front.  He was the one responsible for the sound and the reason was next to his head and about 3 inches away; a little dark gray mouse.

My first thought when I see one or both of the cats with a mouse next to them rather than in their mouth is that it is dead but that was not the case.  This mouse was alive and apparently not injured.  I have seen this behavior before in which the mouse basically “plays dead” and the cats leave it alone but watch it carefully.  Mice seem to know that cats are triggered by movement and that if they sit very still the cats just sit there and guard them.  It was 4:30 AM and I was not fully awake so I do not recall the exact sequence of events, but the mouse somehow ended up in our master bathroom.   I do not recall what I did with the cats but I think I went and got a box with high sides and tried to get the mouse to go in it and it made a run for it towards the bathroom.  Linda was awake by this point so she got a towel for me.  I went in the bathroom and used the towel to block the gap under the door and prevent the little critter from getting back into the bedroom while I tried to get it into the box.  I was unsuccessful and it managed to find a place to hide in the hot water baseboard radiator.

Linda got one of the live traps we recently purchased and baited it with the recommended saltine and peanut butter.  We set the trap near the radiator, turned out the bathroom light, shut the door, and tried to plug the gap with the towel from the outside, figuring we would deal with the mouse in the morning.  Juniper kept pawing at the towel and pulling it back from the door so we put both cats out of the bedroom and shut the door.  They found that confusing as they sleep with us and generally have the run of the house.  One or both of them pawed at the door meowing to get back in for quite a while.  It wasn’t the best night’s sleep we have had and the timing was unfortunate given the hard day of tower work.

Brighton Honda called at 8:01 AM to let us know the car was ready.  Hello, I’m awake now!  I checked on the mouse and it was now safely tucked away on top of the radiator fins inside the housing where neither the cats nor I could get to it.  We decided to leave the live trap in place, sealed the gap under the door, and kept the bedroom door shut to keep the cats out.

I had planned to drive to Isringhausen’s U.S. headquarters in Galesburg, Michigan today but first we had to get my car.  As long as we were headed that way we decided to go to the Brighton Panera for coffee, but had toast and juice for breakfast at home before we left.

The 100,000 mile service is extensive and includes changing the spark plugs.  Beyond the routine service items the Element needed a new ball joint and tie rod and had a stuck brake caliper pin that had to be repaired.  Given the front end work I also had them align it.  Butch and I rebuilt the front brakes last year so I was surprised that there was an issue with them, but the car has been towed and driven in some harsh environments since then so that may have been a factor.

The Panera at Grand River Avenue and I-96 is not one of our favorites.  More often than not we end up with coffee grounds in our cups and the bathrooms are not maintained as they should be.  Today was not the first time we have been to this location that the men’s restroom was out of toilet paper.  It is also often freezing cold inside the restaurant and today was no exception.  The weather was overcast and a bit gloomy but the outside temperature, while not warm, was much more comfortable than inside.  We were also unable to connect to their Wi-Fi signal, which is generally useable.  That’s pretty basic stuff to not be able to get right and falls squarely on local management in my opinion.

While we drank our coffee I called Rick Short at ISRI to make sure he would be in but I got his voice mail again.  I asked for a call back but never got one so I did not make the trip to Galesburg.  Apparently they have better things to do than be of assistance to me.  I only want to buy one chair, not a fleet of chairs, so I understand my relative unimportance, but I don’t like it just the same.  We decided to spend the day at home completing the work from yesterday, which had made a mess throughout the house.

One of the things we needed to do was register our cellular booster system.  Given that it is a five band device I was not clear on whether we had to register it only with Verizon or with all of the carriers.  I called the company we bought it from, Cellular Solutions, and talked to Judy who said we only had to register it with the carriers we personally use.  For us that is Verizon Wireless.  Registration was via the Verizon Website and was simple enough.  It did, however, require me to log in to our My Verizon account and navigate through a couple of screens to a page where we could enter the information from the label on the box.  The serial number was on two peel off tags, so one of those went on the booster and the other one went in the manual.

With the unit registered I turned the power switch on and watched the ‘Alert’ lights all go solid yellow.  As I mentioned in yesterday’s post solid yellow lights are not described anywhere in the manual.  I called Cellular Solutions back and said I had a technical support question.  The woman on the phone took my name and number and said someone would call me back.

Since I was apparently taking care of phone chores I decided to call Universal Towers and inquire about their B-30 base.  The woman who answered the phone never gave her name but was able to answer some questions.  She indicated that their base might or might not be compatible with older Heights Tower products, depending on exactly which product I had, and that I would have to talk to the owner, Bill, who wasn’t there at the moment.  She did know that the outside-to-outside measurement of the legs on a B-30 base was 30 inches and the base cost $290.  She also told me that the larger bases, like the B-30, consisted only of the three rods with the mounting yokes on top; the three rods were not otherwise connected together in any way.  She also confirmed that the ‘U’ shaped yokes at the top of the base rods were welded on and not adjustable.  The normal installation procedure involved connecting them to the bottom of the legs of the first section of the tower, setting them in the hole as the concrete is poured, and adjusting them by moving them around until the legs of the tower were plumb.  That sounded to me like a process where a lot could go wrong and not be repairable.

I pulled a 75 ohm coax out of the ceiling of the basement yesterday.  We laid it out in the basement to see how long it was and it looked to be at least 60 feet.  Linda suggested we test it before running it through the basement ceiling which was a very sensible idea.  I unplugged the power adapter for the TV amplifier power inserter, detached the coax that feeds the TV in the bedroom, attached the downstairs cable, and connected the other end to the basement TV set.  Linda set up the TV for Antenna input, did an All Channels scan, and got the same stations we got yesterday, minus a couple.

In spite of what appeared to be acceptable performance I decided I wanted a new coax cable and Linda wanted to return three of the ropes I bought at Lowe’s but never used.  She found the receipt and we went to Lowe’s.  They had a good quality RG-6 quad-shield coax (75 ohm) in various lengths including 50 feet, which is what I needed.  At the register I decided to buy two more 40 pound bags of solar salt.  I am not an impulse shopper as a rule but their supply of Morton Solar Salt was very low and stocking up seemed like a good idea.

We stopped at Teeko’s to order coffee.  Mary took our order and rang it up; one pound each of the three different half-caff blends that have become our standard.  We took note of the fact that the Bennigan’s restaurant building on the northwest corner of Grand River Avenue and Latson Road was gone and a sign said a Panera would be coming soon to that location.  We didn’t say anything to Mary, but that cannot be good news for Teeko’s.  We will continue to buy our custom roasted beans at Teeko’s as long as they are open but it is going to be difficult for them to compete with a $2.25 cup of bottomless coffee, free Wi-Fi, a restaurant, a bakery, drive through service, and ample parking with great access to I-96.

When we got home I checked the live trap in our master bathroom and we had captured the mouse.  We took the trap to the northeast corner of the property, towards our neighbor’s pond, and set it free.  It did not want to leave the trap and I had to encourage it to go.  Once it hit the ground, however, it scampered away looking for a place to hide.

We then worked on running the new coax from the basement TV to the sump pump room above the suspended ceiling.  I disconnected the power inserter for the amplifier and disconnected the old coax we had tested earlier.  I notched a ceiling panel at the corner of a boxed support column behind the basement TV to allow the ceiling tile to go back into place around the coax.  We then installed one of the wire channels to contain and hide the coax from the ceiling down to the TV set and connected it to the back of the set.

In the sump pump room I attached the coax from the cable entry box (CEB) to the input of the new 1-to-2 signal splitter.  I attached the coax for the bedroom TV to one output from the splitter and the coax we just ran to the other output.  I mounted the splitter on the wall of the sump pump room and secured the cable coming from the CEB to the ceiling.  I then plugged the power supply for the power inserter back in to an AC outlet.  Linda scanned for channels and verified that everything was working correctly.  We then installed the other wire channel alongside the trim on the bedroom doorwall to route and hide the cable coming up from the basement.

I continued to fuss with the cell phone booster gain settings.  We had not gotten the promised return phone call from Cellular Solutions Technical Support so I called them.  I got Judy again and explained what I was seeing with the solid yellow lights.  She checked with her tech support people and they said the manufacturer (SureCall) told them the solid yellow was the same as the blinking yellow; that the booster was adjusting the gain and it was “normal.”  The manual says that normal is when the light is off, so I’m not sure I buy this explanation, but based on that I left the booster turned on.

With all of that done we started cleaning up the tools and materials we had scattered over two floors of the house.  I decided that was also a good time to start a load of laundry, although it was actually rather late in day for that.  I did three loads by the time I was done and it was sometime after 10:30 PM before the last load was dry.  I needed to be up at 7 AM to be at breakfast in South Lyon at 8 AM as our SLAARC group would start setting up for the ARRL Field Day event at 9 AM.

 

2015/05/21 (R) Cats, Cars, and Tenure

Leave a reply

Linda got up around 6 AM and got ready to go to the bakery.  I was aware she was up but I slept in.  Once up I showered and dressed for the day.  I did not plan to work in the bus today so I did not put on my work clothes.  Instead I needed to catch up on blog entries and take the cats to a 2 PM appointment at Plaza Veterinary Hospital in Farmington, Michigan.

I was putting a few things back in the master bedroom closet and noticed that the air-conditioning return air grill was stuffed full of insulation.  We had found this in the other return air grills and removed it but we overlooked this one.  I removed the grill and then removed the insulation and threw it away.  There was a 1/2″ thick filter material stuffed up in the register behind the insulation.  I trimmed the filter to just fit inside the grill and reattached it to the ceiling.  Putting the rest of the house back together will take both of us so we will do that this evening.  Besides, we like to give the carpets as much time as possible to dry out.

I went out around 9:30 AM to fuel my car and get a cup of coffee at the co-located Dunkin’ Donuts.  Back home I put my floor mat back in front of my main computer station and settled in to check e-mail and work on my blog.  There was a new driver available for the NVIDIA GeForce GPU in my ASUS laptop, so I initiated the download.  AT&T was providing me with a 160 KB download speed and the 277 MB driver said it would take an hour to download.  No point tying up the Internet connection until the download finished so I used my iPad while I waited.

The driver downloaded a little sooner than predicted and then installed quickly.  When I finally opened my e-mail and had another 50 MB of stuff to download; a lot of it BCM related.  They are trying to wrap up the April 2015 issue and sent me several drafts since I last checked my e-mail.  I have not been 100% successful in getting folks attached to the magazine to transmit large files via Dropbox instead of attaching them to e-mails.

Tim Olsen from our GLCC chapter called yesterday to let me know he had registered for GLAMARAMA and wanted to park with the chapter.  I updated my spreadsheet and need to e-mail a few folks to clarify their intentions before giving an updated coach count to the rally parking coordinator.  As often happens, I did not have much time left to work on blog posts before I had to round up the cats and take them to the vet.

Both cats complained for most of the trip to Plaza Veterinary Hospital, but they are cats and that is what they do.  I weighed them on the scale in the lobby and gave the receptionist the pertinent facts concerning their health.  Once in the exam room I opened their carriers.  Juniper immediately came out and explored the room.  We were early and had to wait a while but Juniper stayed very busy.  Perhaps she was looking go for a way out.  Jasper did not leave his carrier.  Perhaps he figured he was safer staying in there.

Dr. Carron examined Juniper first since she was already out of her carrier.  The cats both got a clean bill of health other than some tartar on their teeth.  Dr. Carron did not suggest, however, that they needed to be cleaned at this time.  They each got vaccinated albeit for different things.  Jasper also had blood drawn.  He is just a month shy of being 11 years old and Dr. Carron likes to do annual blood work on cats 8 years of age and older.  Juniper is due for a 3-year rabies booster in December of this year but Jasper is not due again until sometime in 2017.  Besides rabies certificates we may need an International Health Certificate for each cat to get them into Mexico and/or back into the United States if we decide to make the trip to Puerto Penasco in February 2016.

I had just left Plaza Veterinary Hospital when Linda texted me that she was wrapping up at the bakery.  It was already after 3 PM at that point and traffic was thick and slow in the usual places.  I had a nice QSO with Mike (W8XH) on the South Lyon 2 meter ham radio repeater for the last six miles of my trip.  He and several other club members bought Yaesu digital radios at the Dayton Hamvention to use with the new Yaesu Fusion 2m repeater that five of them bought from Yaesu for a special promotional price of only $500.

I got home around 4 PM and replied to Linda’s TXT message.  I got the cat carriers inside and set them free.  There was no hesitation about leaving the carriers this time.  Linda got home around 5 PM, 90 minutes after she left the bakery, and I filled her in on the cats’ veterinary appointments.  While we were chatting we got an e-mail from our son letting us know that Shawn’s tenure at the University of Michigan had been approved by the Board of Regents at their meeting today.  We were understandably pleased (and relieved) to finally receive this news and texted back our congratulations.  Shawna sent back a cell phone photo of themselves celebrating at a local Ann Arbor establishment.  They looked very happy.

Most car dealerships in this market are open until 9 PM on Mondays and Thursdays, and neither of us was ready for dinner yet, so we paid a visit to Champion Chevrolet on Grand River Avenue between Brighton and Howell.  We were greeted by Ken, but he only dealt in used cars and handed us off to Dan Danaher.  He had a Chevy Colorado on the lot so we checked it out.  It was not the 4-door crew cab Z71 off-road model, but it did have 4-wheel drive.  We climbed in/out of the front and back seats and played with the tailgate.  The front seats were fine but I could not sit in the back without the driver seat being all the way forward.  The 4-door Crew Cab adds about 7″ of rear leg room but it would still be tight.  That is one of the tradeoffs with mid-size trucks.  The front seats fit us nicely but this is not a truck for tall and/or large people IMHO.  The Z71 off-road version may sit slightly higher but we should still be able to get in/out without needing an accessory step or running board.

The MSRP for the truck we saw was just over $30,000 and overall felt very similar to the Nissan Frontier, nice but not luxurious.  In other respects, however, the trucks were very different.  The Colorado 4×4 models have a transfer case and can be towed four wheels down with an automatic transmission.  We liked the Frontier but it can only be towed 4-down with the manual transmission and for that reason alone is not a viable alternative for us.

Dan gave us a brochure on the Colorado and made a few notes on what we are looking for.  We would obviously like to see the 4-door crew cab and drive the Z71 4×4 off-road model before deciding to buy one.  He said he would call if/when he had those available for us to see and test drive.  If we ordered by the end of the month we would get a 2015 model but it would take 8 – 10 weeks to arrive.  Starting June 1st orders will be for a 2016 model and still take 8 – 10 weeks for delivery.  Recent history suggests a 0.5% to 1.0% price increase for the new model year.  We do not plan to order a new car before the end of May and a 1% price increase would not motivate us to change our minds about that.

On our way back to our car we took a quick glance at the Camaro sitting outside the showroom door.  If we were buying a nostalgia car thus would be it.  Linda’s first car, purchased before we were married, was a used 1967 Chevy Camaro convertible.  It was white with a red interior and had a 327 cubic inch V8 under the hood.  No emissions controls in those days, just raw power and $0.35/gal gasoline.

We drove to Panera in Brighton and had black bean soup and Mediterranean veggie sandwiches for dinner.  By the time we got home we were ready to relax.  First we took the spacers out from under the living room furniture, so we had someplace to sit, and put a few items back where they normally go.  I opened one of the bottles of Malvasia Bianca white wine from the Heart of the Dessert (Eagle Ranch) winery in Alamogordo, New Mexico and we celebrated our daughter-in-law’s attainment of tenure.  It’s been a good year for our son and his family and it is nice to see things finally falling into place for them.  The wine was very similar to the late harvest Rieslings we get from Michigan’s Leelanau peninsula; very sweet and thus a good cocktail or dessert wine.  We watched the final episode from season 1 of A Touch of Frost before turning in for the evening.

 

2014/09/19 (F) Renewed Acquaintance

Leave a reply

After I installed iOS8 on my iPad2 yesterday morning my Logitech Bluetooth keyboard seemed to change its behavior, giving me double letters in some cases and feeling a little sluggish in its response.  The keyboard itself has not changed, so I presume this has something to do with iOS8.  I also presume the keyboard batteries have not run down already, but I suppose that is a possibility.  If so, I will be replacing them once a week.  While creating an image gallery for the SLAARC WordPress website last night I noticed that the drag and drop feature of the gallery editor did not work.  I upgraded to WP Version 4.0 about a week ago but this was the first time I had tried to use the gallery feature.  If there is a problem with this feature there is no way that I am the first person to discover it and I presume WordPress is aware of it.  I find it strange, however, that they have not released a maintenance update fixing it since an improved and more visual editor was a major feature of the 4.0 release.

A few weeks back I re-established contact through Linked-In with a colleague from 10 years ago.  Jim was Director of General Education Services at Livingston Educational Service Agency at the time and we went through NCA Ambassador training together.  It turns out that he lives and works in the Brighton area, so we are now neighbors of sorts.  He suggested we meet up for coffee and I finally called him this morning to arrange that.  We both had time at 1:30 PM today and agreed to meet at the Panera on Grand River Avenue by I-96 at that time.

Linda got the new Global Bake bakery software installed on her laptop yesterday so this morning she was able to start working on the software conversion process in earnest.  Her work requires a lot of concentration, and she gets very focused when doing it, so I went to my office to continue working on editing blog posts and photos.

In checking my e-mail I noticed that I was still getting failed login attempts from foreign countries on this site and on the FMCA GLCC website, which is sub-domain of this site, in spite having installed the premium (paid) version of the Wordfence Security plug-in.  I looked at the installed plug-ins for the GLCC website and discovered that I had one named “Limit Login Attempts” that I did not have installed on our personal website or the other two sites I manage.  I surmised that this plug-in might be doing just what the name implied and in the process preempting Wordfence from ever doing its job.  I deactivated it and saw a reduction in failed attempts, with none from outside North America, suggesting that the country blocking feature of Wordfence was now working properly.  I saw a similar drop in failed login attempts on our personal website when I activated the country blocking feature for all countries except the U.S., Canada, and Mexico.  Only time will tell, however, if Wordfence is indeed blocking login attempts from outside North America.

We had hummus and apples for lunch after which I hung up one load of laundry and put another load in the washer.  I left at 1 PM to have time to stop at Best Buy to get something to clean our various touch screens and monitors.  Traffic was very heavy in the I-96 and Grand River Avenue shopping area, but Best Buy is in the same shopping complex as the Panera, so I made it there on time.  Jim and I talked for almost two hours and which covered the highlights of the last eight years.

Back home I kept my focus on getting the blog caught up.  Linda wrapped up her work for the day and we finished the bottle of Alpha Rose from Red Trail Vineyards while she fixed a simple but tasty dinner of vegan burgers and corn.  I got a call from Butch letting me know that the company in Nevada had arranged for a semi and taken all of the parts they plan to take.  Everything that is left is Butch and Fonda’s to do with as they please.  The important thing for us is that I can now take our bus down there at my convenience.  I would like to get all of the natural gas related work taken care of and put the finishing touches on the garage project before I move the bus, but I may go ahead and move it next week if the scheduling of contractors works out.

During the evening I had an exchange of TXT messages with Chuck.  He had ordered some miniature 24VDC light bulbs (1829s) that are used in our bus dashboards and the order had arrived.  Rather than go to his shop after breakfast tomorrow we arranged to meet him for dinner tomorrow night.  I also got a call from Michele Henry of Phoenix Paint.  She had a new customer who just bought a mid-1990’s Prevost XL converted coach and she gave him my name and phone numbers in case he had any questions about the rig.  We agreed that we would try to find time during the GLCC Surplus and Salvage a Rally to work on the article I started last year about the process she used to repair the body and roof of our coach, seal and coat the roof, and paint the body.  We capped off the evening with the second to last episode of Season 5 of Doc Martin. We need to return the DVDs to the Howell Library on Sunday, so we want to make sure we get through all of the episodes for Season 5.

 

2014/08/05 (T) Primary Elections

Leave a reply

The rain started early today with a pre-dawn thunderstorm and continued off and on the rest of the day and evening.  The area beyond the basement walkout deck is a muddy mess, but Village Landscape Development has not finished grading it.  They need it to be dry, so it may be awhile before they can finish it.

Our first construction task today was to pull electrical cable up into the garage attic for three more circuits.  I wanted to get this done early in the day while it was cool and Linda’s knee was feeling better.  I had been mulling this work over last night and realized that I had probably made an incorrect assumption about the location of the 240V/20A service for the new library air-conditioner, so I put a call in to Darryll right after breakfast.  We got a call from Karen at Bratcher Electric around 9 AM to  see if it would be OK for Mike to stop by around 11 AM to look at some electrical work we need done.  He wanted to see the job in person in order to prepare a quote.

The new cable for the outlets on the west and northwest wall was already in the garage attic but I had to crawl into the low northeast corner to reach it and get it routed in the right direction.  I then had to crawl into the same corner from a different direction to pull it to the junction box I installed last week.  I secured it with cable staples and connected it to the old cable.

Next we pulled a 14-2+g NM cable from the sub-panel to the approximate location where the garage furnace will hang from the ceiling to provide a dedicated 120/15A circuit but did not install an outlet box pending a final location from Darryll.  We then pulled another 14-2+g NM cable from the sub-panel to the north end of the new west utility closet wall.  This cable will provide a dedicated 120V/15A circuit for the new library furnace.  Again, I did not install an outlet box pending a final location from Darryll.

Darryll called back and confirmed that the new 240V/20A dedicated circuit for the new library air-conditioner had to be routed to the location of the condenser/compressor on the outside of the west wall of the garage and there had to be a weatherproof disconnect within three feet of the unit.  That meant another trip to Lowe’s, but not until much later in the day.

Mike Bratcher showed up on time and I walked him through the project.  I want to re-wire the garage sub-panel as a 100A main panel by running service entrance cable from the transfer switch in the southwest corner of the garage to the sub-panel in the northeast corner of the garage.  We may also want to run power to the bus barn if/when it gets built.  Mike suggested that they go ahead and “stub out” the barn service at the same time with an appropriate disconnect.  The plan is to have them do this work at the same time they convert the Kohler whole house generator to natural gas and do the annual maintenance.  Mike also confirmed that they can take care of the natural gas connection to the generator as long as the pipe is located near the back of the unit, has a shutoff valve, and is capped.

By the time Mike left it was after noon so we had lunch.  While we ate we ordered a dual outlet phone/ADSL filter wall plate and a few other things on our Amazon Prime account and researched candidates and proposals for the primary election.  We then went to our polling station, located about two miles from our house, and voted.

This was the first election we participated in since moving to Livingston County.  As Democrats (and liberal ones at that) in this part of Livingston County voting in the primary is an exercise.  The real contest is on the Republican ticket; whoever wins the Republican primary for any given seat will almost surely win the general election in the fall.  Still, we always exercise our right to vote and there were statewide candidates and issues.

The last cable we installed today was another 14-2+g NM to provide 120V to a junction box on the utility closet ceiling.  I mounted a round white plastic junction box approximately 8″ from the east utility closet wall in line with, and slightly in front of, the sub-panel.  I installed a plastic bare-bulb light fixture with a pull chain and 3-prong outlet to the junction box.

I did not tie any of the new circuits into the sub-panel today as we have one more circuit to pull and I want all of the cables at the panel before I cut the power and remove the cover.  We were done with electrical work for today so I turned my attention to drywall surface preparation while Linda retreated to her desk to work on tax returns.  I sanded the drywall compound as smooth as I could and wiped everything down to get rid of the dust.  I then primed all of the new and old drywall on the northeast garage wall along with the plywood platform and exposed 2×12 on the front of the base.

By the time I was done and cleaned up it was approaching 5 PM, we were both tired, and we needed to go to Lowe’s, so we decided to dine out.  We went to Lowe’s first and bought a weatherproof plastic disconnect box, a couple of watertight fittings, a 10′ length of 3/4″ plastic conduit, and a 50′ role of 12-2+g NM cable.  All of this will be used to run the new dedicated circuit for the new library air-conditioner.  We then drove to the Panera in Brighton and used one of our gift cards to have a light dinner.

We were back home a little after 7 PM.  The primer was dry so I decided to paint all of the surfaces I had primed before dinner.  While I painted Linda made a batch of her incredibly yummy granola.  We had a small glass of wine and played a few games on our iPads while the granola cooled and then turned in for the night.

 

2014/07/06 (N) Charmed

Leave a reply

Between the landscapers, tree trimming, and having grand-daughter Madeline here for several nights I have not worked at my desk very much this past week.  I have several projects in process that require me to work at my computer(s) and the most efficient place for that work is generally in my office at my desk.

Since we did not get to go out for our usual ham radio club breakfast yesterday we treated ourselves to a trip to Panera in Brighton this morning.  Comfy chairs, good Wi-Fi, yummy bagels, and tasty, unlimited coffee made for a pleasant morning.  When we were working we went to the local Panera by our previous house almost every Sunday morning.  We did not expect to see the landscapers today, and that turned out to be the case.

I had three main objectives for today and got one of them partially completed.  That’s about “par for the course,” as the saying goes.  I continued to research WordPress plug-ins that would provide a better display of WP gallery images and finally concluded that the best option was the Carousel feature of the Jetpack plug-in from Automattic.  My second choice was the Responsive Lightbox by dFactory but, based on the descriptions, the Carousel more closely matched the functionality I was looking for.

I installed the Jetpack on the FMCA Freethinker website I am developing to test it.  This website only had a few image galleries, each of which only had a few images, so it was a contained experiment.  The plug-in installed without difficulty and it was easy to activate and link through my WordPress.com account.  It was also easy to activate and configure the Carousel component and de-activate most of the other components that I did not need/want at this time.  When I viewed the existing galleries the thumbnails on the page looked the same as before but when I clicked on an image the Jetpack Carousel took over the display of the gallery.  Instead of opening the image in a browser page it displayed the image in a full screen lightbox with forward and backward arrows.  It also had a button to view the current image at its “full size” and provided information about the technical aspects of how the image was created (camera, lens, aperture, shutter speed, etc.).  So without having to recreate galleries, or edit the shortcodes on pages/posts where the galleries appear, any native WP Gallery on the site now displayed better; much better.  And it was free.

I have learned not to be overconfident when it comes to software, so it did not surprise me when the installation on the new SLAARC/WP website did not go as smoothly as the Freethinker installation.  The SLAARC site is hosted on GoDaddy and, according to the Jetpack support forum on WordPress.org, users were having all sorts of problems following a GoDaddy server upgrade just a week ago.  I got an “internal server error” on my first attempt, followed by an installation failure due to the presence of pre-existing folders.  I had to log in to GoDaddy and use the file manager to delete the Jetpack plug-in folder and everything it contained.  While I was logged in to GoDaddy I had to close and re-open the file manager twice to get it to work.  I also ran CCleaner on my laptop which cleared the Google Chrome browser cache.  “The third time’s a charm,” as the saying goes, and I finally got it installed, activated, and configured.  I tested it and it worked like a charm.  I sent an e-mail off to Mike (W8XH) and Larry (K8UT) to let them know and ask them to take a look when they had time.

We watched another episode of Doc Martin, during which we had another momentary power failure.  This one was so brief that our whole house generator did not even notify us of the power blip.  As the episode was concluding we heard the faint rumble of distant thunder.  A check of The Weather Channel and Wundermap on our iPads showed a large storm cluster north west of us moving east.  It looked like it might miss us, but a little while later we lost our power again, this time long enough to trigger the notification from the GenSet, but not long enough to cause it to start.  Within 10 minutes of that second power blip we had a steady summer rain event.  It looked like it might rain through the overnight.  If so, the landscapers won’t be able to work on the retaining walls on Monday, at least not with the excavator.