Tag Archives: Martins (Elkhart IN)

2015/09/18 (F) RBus Anniversary

Leave a reply

The predicted thunderstorms came overnight with heavy rain and lots of lightning and thunder.  I was aware of the rain but Linda seemed to be more aware of the lightning.  Based on the radar just before going to bed the strongest storms passed north of us.  Even with furnaces and air-conditioners we are more intimately connected to the weather in our RV than we are in our house, especially during storms, but we like that aspect of the lifestyle.  If we wanted to live in a climate controlled bunker we would build one at the house.

Our bus at the GLCC Surplus Salvage Rally at Elkhart Campground in Elkhart, IN. We bought it six years ago today. We are the 4th owners as best we can determine.

Our bus at the GLCC Surplus Salvage Rally at Elkhart Campground in Elkhart, IN. We bought it six years ago today. We are the 4th owners as best we can determine.  The older GM buses behind ours are also members of the FMCA Great Lakes Converted Coaches chapter.

We bought our bus six years ago today.  It is an H3-40 VIP motorcoach that was manufactured by Prevost Car Inc. in Quebec, Canada in August 1990.  It is powered by a Detroit Diesel 8V92TA diesel engine manufactured in April 1990.  It went directly to Royale Coach in Elkhart, Indiana in September 1990 and the conversion was finished in October 1991.  Because of the timing it was titled as a 1992.

In Michigan vehicles have to be at least 25 years old to qualify as “historic” so we are still a couple of years away from that benchmark, but she is a grand ole gal none-the-less.  Technically historic license plates, which carry an inexpensive registration fee, are only supposed to be used on vehicles that receive limited use, such as in car shows and parades, but people routinely put them on everyday use vehicles to avoid paying higher registration fees.  We, however, do not intend to do that.  It’s the kind of thing that some bureaucrat in the future can decide to do something about and end up imposing retroactive penalties.  It’s just not worth the risk of having to deal with that hassle.

We spent an hour after breakfast figuring out the required dimensions for the Corian table that will go between the two captain’s chairs in the living room of the bus.  I then called Countertops Plus and left a message for Ferman Miller with the dimensions.  It turned out that the table needs to be 22″ wide and 38″ long and I doubt that he has enough material in his 96″ by 30″ sheet to make both the desktop and the table.  I will follow up with him on Monday if I do not hear back from him before then.

We left late in the morning to visit two of the surplus and salvage businesses on US-12 in Michigan.  Johnson’s is just west of White Pigeon and Bontrager’s is east of White Pigeon but not as far as Sturgis.  I found two switch plates at Johnson’s that might fit two small 12V DC switches I need to mount.  At Bontrager’s I found a 1-1/2″ Bristol blade valve to replace the one on our fresh water tank.  We also bought four packages of small 12V DC LED rope lights.  Each pack is 5 meters (16′) long and has 60 warm white LEDs per meter.  They are rated at 4.8 Watts per meter and are very bright.  My intention is to use them around the inside of cabinet openings in place of the incandescent light fixtures that are original to the coach.  The will give a brighter light and illuminate the entire inside of the cabinet rather than shining light from a single location.

We looked at a powered fresh water hose reel with a 40′ hose and a powered 50A shoreline reel with a 33′ cord.  They wanted $200 for the water reel and $400 for the cord reel.  Linda looked them up online using her phone.  The asking prices were certainly less than retail at Camping World, but not enough less to make me shell out that kind of money for something that might not get installed for a year or more, if I could figure out a way to install them at all.

We stopped at Martin’s on the way back to camp and bought two Amy’s frozen vegan lasagna entries for dinner.  The other rally participants were having regular lasagna and we wanted to fit in.  🙂  Salad was also being served and Vickie was making it without cheese, eggs, etc. so we could have some.

Pat and Vickie had a Nutone Food Center years ago and still had some of the accessories plus a replacement motor.  They brought all of it over to see if it would fit our unit.  It did, but was missing one piece, a right angle drive that was needed for some of the accessories.  Vickie was pretty sure they had it somewhere at home but would have to look for it after the rally.  They also did not have the food processor, which is the accessory that interests Linda the most, but it was nice to get what they had.  Linda can start checking EBay now that we know the other accessories fit our recessed power base.

I helped Pat with the wiring for an LED replacement bulb for a fluorescent light fixture.  They have 12 of these fixtures (with 24 tubes) in their 1987 Prevost XL conversion.  Pat found LED replacements that can be wired directly to the switched 12V DC supply, completely eliminating the use of the electronic ballasts.  It turned out that the pins at each end of the tubes were also electrically active and we had to cut all of the interconnecting wires.

Ed Roelle stopped by to find out what we were doing with all of the food equipment.  Apparently someone thought we were “giving it all away.”  Not true, of course; it belongs to the club and isn’t ours to give.  What we wanted was for different people to take the things that will be the most useful at the rallies they host.  Linda and I do not make it to all of the rallies, and next summer we will miss two of the big ones; Back-to-the-Bricks in August and Surplus & Salvage in September.  We plan to attend the Escapees Escapade Rally at the end of July in Essex Junction, Vermont, and then the FMCA rally in early August in Massachusetts.  We will then head for the Canadian Maritimes and work our way back down through New England over the course of the early fall.

Pat Caverly stopped by to see the bus.  Linda showed her around and then we all sat down to visit for a while.  After they left to help with dinner preparations I finished the posts for yesterday and the day before, e-mailed them to myself, and started working on today’s post.

Dinner was scheduled for 6 PM and most folks were gathered by then.  Rain looked imminent so I closed the three roof vents in our bus, gathered up the bag of chapter T-shirts and flags, and went to the meeting room.  I conferred with Pat, Vickie, Tami, and Linda and decided to hold the brief business meeting before dinner.  It took all of 10 minutes.  Dinner was salad and lasagna.  Vickie prepared the salad by keeping all of the ingredients separate.  That allowed us to build our salads using only things we eat, which we really appreciated.  Linda heated the frozen Amy’s vegan lasagnas that we bought at Martin’s for our main course.

Linda was helping clean up in the kitchen and I was sitting at a large round table swapping bus stories when Michele Henry of Phoenix Paint came in.  She was on her way home, which is not far from the campground, and knew from talking to Josh (at Coach Supply Direct) that we were here for a rally.  She stopped in to see if she could find our coach, which of course she could even in the dark, since she is the one who painted it.  Linda and I excused ourselves and went back to the coach with Michele, retrieving her kids from her car.  We showed her the interior remodeling and had a long chat.

While we were talking Juniper caught a small house mouse.  We knew there was one around because she had been focused on the bathroom most of the day exhibiting stalking behavior.  Something got my attention and when I went back to the bedroom it was immediately obvious, even in the dark, that she had a mouse on the bed and was “playing” with it.  I got a paper cup and went to the bedroom to try and catch it.  It was very small, clearly a very young mouse.  I made Juniper release it and it hunkered down on the floor by the HVAC duct.  When I put the cup down it started to go the other way but Juniper was there and it turned around and ran into the cup.  Although the cup was not big it was big enough, and slick enough, that the mouse could not climb out.  I put a paper bowl over the cup to make sure it did not escape and we continued to chat.

It started raining while Michele, Raven (her daughter), and River (her son) were visiting.  At one point the rain was very heavy and the lightning was intense and frequent so they stayed long enough for the storm to pass.  It was getting late and we were all a bit tired so they prepared to leave.  I took the bowl off of the cup and placed a plastic zip lock bag over the cup and zipped it shut.  Raven carried the cup and Michele said they would release the mouse about a mile down the road near an area of fields.

Linda turned the front TV on and we watched an episode of Gotham, which we will not have to watch again, and American Masters (on PBS).  The American Masters episode was on the photographer Pedro Guerrero.  Although known as perhaps the best photographer of Frank Lloyd Wright’s architecture, he had a far-reaching and distinguished career.  As always, it was a well done program on a fascinating individual who made important cultural contributions.  Linda was dozing at the end, went to bed, and fell asleep.  I tried to write for a while, gave up, and went to sleep.

 

2015/09/17 (R) Counter This

Leave a reply

I went to breakfast before Linda as she was still asleep.  I wanted coffee but it wasn’t ready so I toasted a blueberry bagel and ate that.  Eventually the coffee was ready and I had some.  Linda showed up a little while later with our granola and fruit and most of the rally attendees arrived and had breakfast.  I got a call from Josh regarding the Corian desktop.  He indicated that Ferman Miller of Countertops Plus in Shipshewana had a piece of Sandstone Corian big enough to make our desk top and was expecting us to call or visit.

After breakfast we gave Vickie a tour of the bus and visited for a while.  We then drove to Countertops Plus, located east of downtown Shipshewana, and met with Ferman Miller.  He had a piece of 1/2″ Sandstone Corian that was a perfect match to our existing counters.  It was 96″ long by 30″ wide.  He needed a 72-3/4″ by 25-3/4″ piece for the desktop plus a 72-3/4” by 1″ piece and a 25-1/4″ by 1″ piece for the front and left edge returns.  It looked like he might have enough Corian left to make our dining room table so I made a quick sketch but left off the length and width dimensions.  We ordered the desktop and the table.  He figured out the price and we gave him a deposit.  I need to determine the length and width of the table and call him in the morning with those dimensions.

We set the GPS for Jarel Beatty Cabinetry and headed for Logansport.  I called Jarel to let him know we were on our way and verify that it was still OK to come.  We drove through the pleasant Amish/Mennonite countryside on small count roads we had not previously traversed and passed a school where the children were playing softball dressed in their plain, traditional clothing.  It was an odd yet delightful sight.  Once we were on US-20 we were on familiar roads.  We stopped along US-20 for fuel and a break and bought some peanuts and water.  We arrived at Jarel’s place at 2:11 PM.

We brought a 60″ long piece of 1/4″ walnut veneer plywood and had Jarel rip two pieces 4-3/4″ wide.  He actually cut them slightly wider and then trimmed off a small edge to get the long edges clean and square.  We loaded the half sheet (96″ by 24″) of 3/4″ walnut veneered plywood in the car and then loaded the half box cover for the forward passenger side OTR HVAC duct.  There were other pieces of plywood and hardwood left so we loaded all of those as well.  We only realized after we left that we forgot to get the drawings back from Jarel.  I sent him a TXT message and asked him to hang on to them until I could get them from him and he agreed to do that.

We stopped at the Martin’s supermarket about a mile from Elkhart Campground and made salads for dinner at their excellent salad bar.  It was 5:30 PM by the time we got back to the campground.  Dinner was nominally at 6 PM but was ready to eat closer to 6:30.  Linda reheated seitan stroganoff (vegan, of course) for our main course.

After dinner we gave Charles and Connie Martin the tour of our interior remodeling project and chatted for a while.  There were thunderstorms in the overnight forecast so I rolled up the two driver side awnings.  We then joined Scott and Tami Bruner at the fire pit by their bus.  I took a couple of folding chairs over and Linda brought our glasses of Franzia Moscato.  Charles joined us and so did Dan.  Tami had interviewed for a new job this morning, gotten the offer, and accepted the position, so it was a big day for her.  She and Scott have also been successful finding things they need for their bus conversion projects (they own two buses) so it has been a very good week for them.

Tami was tired and headed off to bed and Linda had the same idea a short while later.  There was a fairly high probability of rain starting at 2 AM with but we got occasional drops starting at 10 PM.  By midnight we were all getting tired and the raindrops were becoming frequent enough that they gave us an excuse to call it a night as we needed to put our lawn chairs away so they did not get soaking wet.  I wrote for a while in bed but I was too tired to work efficiently and went to sleep around 1 AM.

 

2015/08/19 (W) If It’s Wednesday This Must Be Indiana

Leave a reply

 

As we did last Wednesday we were up earlier than usual to drive to Indiana.  We wanted to be at Bontrager’s Surplus when they opened at 9 AM to pick up some battery terminal covers for Butch, and possibly ourselves, so we pulled out of our driveway at 6:16 AM.

We took our usual route west on M-59 to I-96W to Lansing Road south.  Rather than get on I-69S we stayed on Lansing Road all the way to Charlotte where we stopped at the Biggby’s Coffee to use the restroom and get coffee and bagels.  From there we then took I-69S to Coldwater and headed west on US-12 since Bontrager’s Surplus is located on US-12 in White Pigeon, Michigan.

We arrived at Bontrager’s Surplus just after 9 AM.  We looked around briefly but did not spot the battery terminal covers so we asked one of the employees where they might be and he took us directly to them.  We bought 36 (18 red and 18 black), 10 of each for Butch and 8 of each for us.  Bontrager’s is probably the best stocked of the surplus and salvage stores in this area and I could have spent hours here, but we had other places to be and a long day ahead of us.

Our shopping done we continued on to Coach Supply Direct in Edwardsburg, Michigan where we found Josh Leach hard at work on some interior remodeling of a Fleetwood Revolution.  He removed the Notion Linen sample from his Lambright Comfort Chairs book and we chatted for a while.

I reflected on fact that one of the nicest Class A motorhomes we ever saw was a Fleetwood Revolution.  The interior was a (faux) cherry wood with satin finish nickel hardware.  It had modern, clean cabinetry and light grey wall treatments and a light tile floor with nickel colored inserts, as best I can recall.  We eventually toured the American Coach factory in Decatur, Indiana where the Revolution was made and after seeing some of the construction methods we were less enamored with it.  Like all of the American Coach products it was out of our price range as a new unit but it was very much to our taste.

Before continuing our Journey Linda pulled up Jarel’s address in our GPS.  I then texted Jarel to give him a revised, and more accurate ETA.  We headed southwest out of Edwardsburg on M-62 which becomes IN-23 through Granger.  We turned onto IN-331 which bypasses most of Mishawaka east of town and delivered us to US-20 where we headed west.  We stopped at the Meijer’s, which has a filling station, fueled the car, and switched drivers.  We exited US-20 just south of South Bend, Indiana and headed south on US-31.  We exited US-31 at Rochester and took IN-25 south to Logansport.  I texted Jarel an updated ETA enroute.

We arrived at Jarel Beatty Cabinetry at 11:45 AM and pulled around back.  I texted Jarel to let him know we were there and he came out of the shop to meet us.  We chatted for a while, loaded up the pantry, the slides, the three pieces for the built-in sofa that we forgot last week, a piece of walnut trim for the pantry face, and a leftover  piece of 1/4″ Baltic birch plywood.  Linda wrote a check for the balance we owed.  The only thing left for Jarel to build is the HVAC/wiring chase cover but he cannot do that until I give him the length, which I cannot do him until the desk is installed in the bus.

We left the cabinet shop at 1 PM and stopped at the Martin’s supermarket in Logansport for lunch.  This particular Martin’s did not have a salad bar but they did have pre-made salads.  We each had one along with a bread roll.  I called Butch to let them know we were on our way, and headed for Twelve Mile, Indiana.

I gave Butch the battery terminal covers.  He and I figured their cost ($1.25 each) covered the cost of the 12 fiberglass pole mast sections ($2.00 each) we took last week and called it even.

I brought the small window frame stop block from our bus to see if Butch could make one.  He had some aluminum bar stock that looked like it would work.  We decided to make it longer than the original to accommodate three machine screws and cut it to size using a band saw.  Butch then marked three points to drill holes using the old block as a template.  Two holes were drilled through and one end hike was blind.  The blind hole will fit over the shaft of the old screw that would not come out in case any of it is still protruding above the surface.  The middle hole will line up with other existing hole and I will have to drill and tap a hole in the frame to match the third hole.  But first I need to get some brown spray paint, put some sacrificial screws in the holes, and paint the piece.

While we were working on the stop block I noticed that Butch had a torque multiplier sitting out.  He commented that it was available to a good home for a good price; hint, hint.  These torque multipliers are used to break the lug nuts loose on bus and truck wheels and I have had one on my mental wish list since I first became aware of them five years ago.  I had not pursued getting one as they tend to be expensive even used on Ebay.  Butch wanted $75 for it so I wrote a check and put it in the car.  It has three different lug nut sockets so I hope one of them first the ones on our bus.  I also hoped they would fit the very large torque wrench I bought from Butch last fall but they are 1″ square drive sockets and the torque wrench has a 3/4″ square stud.  I’m not sure I have a correct socket for the torque wrench so that’s another thing I still need to get.

Butch and Fonda bought a compact stacked clothes washer/dryer for their bus and asked if we would help them get it into their rig.  Of course we said yes.  We got it on a dolly and wheeled it out to the entrance door and then pondered the situation.  We have some recent experience getting things out of and into a bus entrance door and this did not look promising.  Butch handed me a tape measure and I determined that the maximum width that would fit through the step well was 23.5 inches due to the door hinges.  The washer/dryer is 24″ wide and 28″ deep with a recessed back on the washer (lower unit).  It is also tall, being a stacked unit, and we all agreed that the only way it was going in was on its back, through a window, using a forklift.  It was Deja vu all over again; been there, done that, didn’t even get a T-shirt.  That approach required more preparation than Butch cared to tackle today, and more time than we had to spare, so we moved the unit back under the overhang and left it covered with a blanket.

We all went back in the house and visited for a while longer.  Butch had found his 4″ pneumatic body sander and loaned it to me along with three boxes of AA50 sanding discs.  While not quite as aggressive as the #36 ceramic grit belts I have been using on the 4″ portable belt sander, this tool will allow me to get under the cabinet toe kicks where the belt sander won’t reach.

As much as we would have liked to stay and go out to dinner again, we did not want to be getting home at midnight.  We wished them a safe journey, again, but this time it really is unlikely that we will see them again before they leave for Arizona.  We left for home at 4:45 PM with Linda at the wheel.  From SR-16W (CR-700N) we took CR-700 (Meridian) north to its northernmost point and headed west into Fulton on W750S where we picked up IN-25 and headed north.  At Rochester we left IN-25 and took US-31N to US-20W.  We exited US-20 at SR-19 and drove north through Elkhart, finally arriving at the Martin’s supermarket at CR-4 around 6:15 PM.  This Martin’s has an excellent salad bar and a nice dining area with an upstairs, which is where we chose to sit and eat our dinner.

Linda continued to drive after dinner.  There is an entrance to the Indiana Toll Road (I-80/90) on SR-19 just south of CR-4 so we got on going east.  The toll road is a few extra miles compared to US-12 through Michigan, but it is posted 70 MPH (max) with no stops, compared to 55 MPH with six towns that have reduced speed limits and stops.

We exited the toll road, paid our $2.90 toll, and headed north on I-69.  A few miles later we were back in Michigan.  We left the Interstate at M-60 (exit 25) to refuel at the Shell station, use the restrooms, and switch drivers.  It was about 8 PM and still light, but it was cloudy to the west and the light was fading.  I find night driving easier than Linda does and I had been able rest while she drove so I was good to go.

I followed our usual route, leaving I-69N and using the Lansing Road cutoff to get to I-96E.  We passed mile marker 100 on the south side of Lansing, which meant we had 33 miles to the M-59 exit.  From there it was 11 miles to Hacker Road and then the final 2.5 miles to our house.

We arrived home at 10 PM, five hours and 15 minutes after we left Twelve Mile and just over 16 hours from when we left home this morning.  The trip odometer indicated 534.8 miles traveled today.  We unloaded the camera, phones, wallets, etc. from the car but decided to wait until tomorrow to unload the cabinetry, tools, and parts.  We headed off to bed and watched part 3 of a PBS program The Mystery of Matter:  The Search for the Elements.  Interesting stuff.  We both find programs that inform and educate to be entertaining.

 

2015/08/12 (W) Back to Indiana (Again)

Leave a reply

Today was early arrival day for the annual Back-to-the-Bricks converted bus rally in Clio, Michigan.  This joint rally of the Converted Coach Owners (CCO) and the FMCA Great Lakes Converted Coaches (GLCC) chapter has become an annual event that typically draws 20 to 30 rigs.  Most of them are converted highway buses and many of those were converted or re-modeled by the owners.  Many of them are works in progress but such is the nature of the bus conversion hobby and the true bus nut.  But that is not where we were headed today.  Our bus is unusable at the moment as the toilet is disconnected, the bed platform has been removed, and all of the cabinet drawers have been taken out.  But the main reason was that we had multiple commitments in Indiana today.

Our first appointment was with Josh Leach of Coach Supply Direct.  Although CSD is located in Edwardsburg, Michigan we had arranged to meet him in the parking lot of the Martin’s Supermarket at SR-19 (IN) and CR-4 on the north side of Elkhart, Indiana at 9:30 AM to take delivery of 15 yards of upholstery fabric.  We picked that location, rather than his shop in Edwardsburg, for several reasons.  He had to be at the Forest River Owners Group (FROG) rally at the Elkhart County 4-H Fairgrounds at 10 AM so that location got him half way to his destination at a good time of day.  For us, Elkhart is a 3-1/2 hour drive.  That meant we had to be up at 5:00 AM and on the road not later than 5:45 AM to be there on time, allowing for coffee, fuel, and bathroom stops.  Had we met him at his shop we would have had to be there by 9 AM requiring us to get up even earlier.  You have to draw a line somewhere.

I took the wheel for the start of the trip.  It was still dark but the faint glow of the impending sunrise was visible as we pulled out onto Hacker Road facing a rising crescent moon.  At M-59 we headed west to I-96.  I reset one of the trip odometers before we left and verified that it was 13 miles from our driveway to the end of the entrance ramp from M-59 onto I-96W.  We skirted the southern edge of Lansing on I-96 and took Lansing Road to I-69 south.

Nineteen miles south of Lansing, and about an hour into our trip, we stopped at the Biggby’s Coffee in Charlotte for coffee and bagels.  Biggby’s is not my favorite coffee but this particular store is in just the right location.  Linda checked the M-DOT website and it appeared that the bridge work on M-60 in Mendon was completed, so we exited I-69S and headed west on M-60.  Unfortunately the bridge was still closed so we had to follow the detour to the south toward Sturgis.  Unlike our previous trip in early July, when we continued on to Sturgis, we followed the complete detour through Nottawa and Centreville and back to M-60 in Three Rivers.  We had never driven through Nottawa or Centreville before so that provided some new scenery for the trip.

As we have done many times before we continued our trip on M-60 as far as Jones where we stopped at the Shell station for fuel.  We then took M-40 south to US-12.  This seven mile stretch of M-40 traverses steeply rolling hills and is both beautiful and fun to drive.  We took US-12, running west just north of the Michigan-Indiana border, and eventually exited onto Old 205 (M-205?) which turns 90 degrees to the left a mile later and drops straight south into Indiana where it becomes SR-19.  A few miles later we arrived at the Martin’s Supermarket at CR-4 just after 9 AM.

Josh was not there yet so we went inside to use the restrooms and get some coffee.  This particular Martin’s has a nice salad bar with a beverage station, a Starbucks Coffee outlet, and a seating area with Wi-Fi.  Josh showed up right on time and parked next to us.  I met him outside and we transferred the roll of upholstery fabric from his car to ours and then went inside to visit for a few minutes before he had to leave for Goshen.

When we left Linda took over the driving.  Our next planned stop was A1-Upholstery in Elkhart to order the cushions for our built-in sofa.  Continuing south on SR-19 we stopped at Factory RV Surplus to look for battery cable end covers but the ones they had were too expensive.  I think they now sell more retail-packaged merchandise than they do true surplus material, and even less salvaged parts.

Lou (mom) and Terry (daughter) own and operate A-1 Upholstery and were recommended to us by Josh.  We discussed the project with Terry, who I had previously spoken to on the phone.  We reviewed my dimensioned scale drawings, which were on one sheet of 11″x17″ 1/4″ grid-square paper, and agreed on how the cushions would be made.  Terry thought she would have them done by the end of the month but noted on the order form that we needed them by September 14th.  We noticed that she had a lot of sample books from which we could have selected a fabric but we like the Lambright Notion Linen, and Terry thought it was a very good fabric that should look good and wear well in our application.  We left the fabric and drawing with her and wrote a check for the deposit.

All of our stops were important today, but our primary reason for the trip was to pick up the pieces of the custom desk and built-in sofa for our bus from Jarel Beatty Cabinetry in Logansport, Indiana.  We continued our trip south on SR-19 to US-20, took that west to US-31, and went south, exiting at Rochester onto IN-25 for the final 22 miles to Logansport.  This is a route I have driven many times but Linda had the wheel this time so I provided some occasional guidance.  I called Jarel to let him know we were making better time than we had anticipated and would be there between noon and 12:25 PM.  I then called Butch to give him a status update.

This was the first time Linda and Jarel had met and so it was also the first time Linda had met Mya, Jarel and Georgette’s sweet little dog.  Mya came up to me, sat, stared up at me like we were long lost friends, and waited patiently for me to give her the attention she was seeking.  I was happy to oblige.

Jarel Beatty Cabinetry, Logansport, IN

Jarel Beatty Cabinetry, Logansport, IN.  Panorama taken from the entrance door.

Jarel Beatty Cabinetry, Logansport, IN.

Jarel Beatty Cabinetry, Logansport, IN.  Panorama from the center of the shop.  Entrance door is far left.

As I have previously described in this blog, the desk consists of nine pieces (if you count the four drawers as separate parts):  two pedestals with separate bases, a cover that goes between them, and four drawers.  The left pedestal has a fold up work surface with two support wings, and a fold down fake drawer front, so technically those are four more pieces, but they are attached to the pedestal with hinges so I am not counting them as separate parts.  The bottoms of each pedestal have been cut out to provide access to the fan-coil heat exchangers that will be installed in the bases, so those are really two separate pieces now, put I am not counting them as such.  I am also ignoring screws, drawer slides, blocking, and other assembly items in my parts count as they are all “installed components.”  With the drawers installed we only had five major pieces to load plus the two access plates.  Jarel also had the pieces ready for the built-in sofa so we loaded those as well.  I took pictures of his shop and the pull-out pantry, which was mostly assembled but not quite finished.

The installed desk will have more pieces than just described but these are the pieces that Jarel made.  The finished desk will have five grills that we have to cut and install, at least four drawer pulls that we have to install, a plywood top that will span the two pedestals and leg space, and a Sandstone Corian countertop that will go on top of the plywood.  While not actually part of the desk there will also be a large cover for the passenger-side living room HVAC duct and wiring chase and a small hose cover at the desk end both of which align with the left end of the desk and will look like they are part of it.  Jarel will make the chase cover later after the desk is installed and we can get a final, accurate measurement for its length.

As long as we were in the neighborhood we naturally stopped to visit with our friends, Butch and Fonda, in Twelve Mile, Indiana.  While we were at their house we loaded a dozen 4-foot army surplus fiberglass mast sections in the car.  Butch had bought these at a swap for me some time ago.  We will use them for ham radio antenna projects.  Butch gave me his old, non-functioning, Vanner battery equalizer to see if I can figure out how it does what it does.  He also lent me his air-powered brad nailer which can also drive 1/4″ crown staples and gave me a box of 5,000 staples to go with it.  Fonda found a scrap piece of resilient underlayment designed for free-floating wood floors.  Butch though it might work well under the 1/4″ plywood underlayment to fill in the gaps and irregularities so we took it with us.

When we were done loading stuff into our car we went to see their new property on SR-25.  They have already had a new roof put on the barn and new doors put in the house.  They have bought themselves a BIG project, but it will be a much more appropriate and manageable place for them going forward than the building complex in Twelve Mile that has housed their business operations for the last 20 years.  It’s an old GM dealership from the 1940s and they have approximately 11,000 feet under roof including a 2-bay service garage with a functioning in-ground lift.

We drove to Rochester and had dinner at Pizza Hut.  Linda and I split a medium specialty veggie pizza and had the salad bar with it.  We might have had a few more restaurant choices in Logansport, but Rochester was 22 miles closer to home.  With the 19 hours we were gone today, and over 525 miles we had to travel, 22 miles and 30 minutes was significant for us.

We got back on the road at 6:30 PM with Linda at the wheel and headed back up US-31N to US-20 and headed east.  We decided to stay on US-20 all the way to I-69, stopping in Lagrange to use the restroom at the Marathon complex.  We stopped again at the Shell station on M-60 in Michigan for fuel.  It was getting dark and I had been able to rest while Linda drove, so I took over the driving duties.  From this point on we were just reversing our route from this morning.  We got home at 10:30 PM, unloaded everything from the car, and then went straight to bed.

 

2015/06/01 (M) Bradd and Hall et al

Leave a reply

The temperature dropped into the upper 40’s last night.  Although the temperature in the bus only dropped to about 64 degrees F I was cold and did not sleep soundly.  The electric heater pad is still on the mattress but was not plugged in so I could not use it.  Linda developed a bad sore throat during the night (there are no good ones) and also did not sleep well.  We got up around 7 AM and I made coffee while she got dressed and drove to the nearby Martin’s supermarket for Ibuprofen and Chloraseptic throat lozenges.  Sore throats are no fun.  We both hope this passes without requiring medical intervention.

We are in the newest section of Elkhart Campground which consists of narrow pull-through 50 Amp full hookup sites that are long enough to leave a towed car connected to a 45 foot motorhome.  The section is not full but the motorhome on our passenger side had their GLAMARAMA 2015 parking and volunteer placards in the window this morning.  We finally opened our registration packet and found that we also have a volunteer placard since Linda is volunteering at the registration table.  We also discovered that we could have arrived at the Fairgrounds this morning and stayed for no charge.  Oh well, Elkhart Campground is more convenient to Bradd and Hall and other Elkhart area vendors and if we checked into the rally we would immediately be working and socializing instead of shopping.  One must be clear about their priorities.

Bradd and Hall is open from 9 AM to 5 PM Monday through Friday.  We got there around 9:45 AM and had just gone inside when I got a call from Curtis Coleman.  We was headed east on I-80 from Iowa with his sights set on Cleveland and Columbus Ohio and did not realize we were in Elkhart.  He brought me up-to-date on some things having to do with RVillage and we discussed him coming to our house to hang out once he had taken care of some business later this week and we got back home from the rally.

At Bradd and Hall we were assisted by Stephanie.  Bradd and Hall had a good selection of Flexsteel Captain’s chairs and Lambright Comfort Chairs but did not have any Flexsteel barrel chairs.  That was more than disappointing as we thought the Flexsteel bolt down barrel chair might be just what we need to provide seating, with seat belts, on the passenger side of the coach that can swivel to face anywhere from forward to aft.  They had two Flexsteel Captain’s chairs that we found comfortable enough and were not too large.  Either one might do nicely to replace the front passenger seat, and possibly to replace the driver’s seat, although I am holding out for an ISRI air-suspension driver’s seat.  We took cell phone photos of each of us sitting in various seats, photographed product tags, and got several fabric samples but were no closer to a decision about seating when we left than we were when we arrived.

On the drive back to the campground we stopped at Factory RV Surplus to look for some electrical components but ended up looking at furniture.  They had a barrel chair that we liked but no identifying information on it.  We did, however, get some free popcorn.  We were headed up SR-19 and decided to go on up into Michigan and pay Michelle Henry a visit at Phoenix Paint.  There did not appear to be anyone around so we left and went back to our coach and had a bite of lunch.  We had planned to also visit Lambright Comfort Chairs in Shipshewana, but we had been there before and figured they would not have anything different from what Bradd and Hall had on display.  With both of us being tired and Linda still not feeling well we decided to stick around the bus and continue to do online research.

Sometime during the afternoon I got a call from Jim Marin wanting to know where we were parked.  From our windshield I could see their motorcoach parked up by the office waiting to come into the campground.  The space to our passenger side was vacant so they registered for that one and pulled on around and in.  Jim and Lydia have a 1997 MCI 102DLS-3 Vantare conversion that they bought last September.  It’s a nice coach and they got a good deal on the purchase.  They got plugged in and set up while we connected our car for towing and then we stood around visiting in the cool temperatures and warm sun.

We were showing them what we have done to the inside of our coach and explaining what we plan to do when there was a knock on the door.  It was Curtis Coleman.  He had decided that Elkhart was far enough for one day and knew we were here as a result of our conversation this morning so he pulled in for the night and was parked one spot up from Jim and Lydia.  We made introductions, finished looking at our coach and then toured Jim and Lydia’s bus.  I brought my tape measure and tried to quantify the size of their furniture which appeared to fit very nicely in the available space.  All of us then went to Curtis’s coach, which is also a 1997 Vantare conversion of a Prevost XL, and got a sense for his seating.  Both coaches have ISRI driver’s seats and both Jim and Curtis really like them.

We had eaten dinner earlier so Marin’s returned to their coach for their evening meal and we left Curtis to tend to Augie Doggie and take care of RVillage business.  Curtis came over later to visit and we sat in our coach in three lawn chairs and had a great chat.  He returned to his coach at 10:45 PM and we went to bed a short time later.  It was forecast to drop into the mid 40’s overnight so I closed the roof vents and turned on the electric heater pad on my side of the bed.

 

2013/12/07-12 (S-R) The Celebrations Begin

Leave a reply

On Saturday morning I went to our local ham radio club breakfast as I usually do.  Linda stayed home, which is not usual, as I had a website meeting immediately following breakfast.  Club president Mike (W8XH) and I previewed the new club website for a small group that included the other two officers.  We provided them with logins so they could access the site, most of which is blocked from public view, and asked them to interact with it and provide feedback.

We had ordered garage door openers so each of our children could have one.  They arrived a couple of days earlier and we finally got around to programming them on Saturday afternoon.  They arrived just in time, too, as we were headed to Katie’s (grand-daughter #2) 17th birthday dinner that evening.  Our daughter (Meghan) and her husband (Chris, Katie’s dad) were there, as were our son (Brendan), his wife (Shawna), and their daughter (Madeline, grand-daughter #1).

Katie has developed quite a taste for sushi and selected Yotsuba in Ann Arbor, Michigan for her birthday meal.  Japanese restaurants were once a rare treat for us.  As with most restaurants that are not specifically vegan, or “vegan friendly” Japanese restaurants now pose a challenge for us.  But they had things we could eat, and they were very good.  Katie is very interested in science and decided she would like to start building a library with some quality leather-bound books in it.  She specifically requested Darwin’s On The Origin Of Species… and Linda was able to find a used, mint condition copy at Franklin Books (in New Jersey).

Brendan and Shawna had a social engagement after dinner so they left to put Madeline to bed.  Linda and I followed a short while later and did baby-sitting duty for a couple of hours until they returned.  By the time we got home it had been a long but very good day.

Sunday evening was the annual South Lyon Area Amateur Radio Club holiday dinner which is held in lieu of our regular second Sunday of the month business meeting and technical program.  The club decided to try a new venue this year and selected the Zukey Lake Tavern near Pinckney, Michigan from among three candidates.  Although not located in South Lyon, we had a portion of the restaurant to ourselves that was sufficient to accommodate the 40 people who showed up.  We were also allowed to order from the menu and had sufficient wait-staff to efficiently take our orders and deliver our food.  Everyone seemed to enjoy themselves and like the food; at least they ate a lot of it!

Linda pulled her usual babysitting shift on Monday and I headed for Edwardsburg, Michigan to retrieve the bus.  I originally planned to winterize it and then drive to our friends’ place in Twelve Mile, Indiana to spend a couple of days tying up loose ends on the Zena auxiliary power generator project.  I was then going to take the bus to Martin Diesel in Defiance, Ohio to have them check, service, and adjust it before returning home.  As most of this work would be done outside, I decided to alter my plans when the weather forecast called for overnight low temperatures near zero (F) for most of the week.  Pat and Vickie Lintner from our FMCA Great Lakes Converted Coaches chapter had once again offered the use of a spare bedroom at the house in Elkhart, Indiana so I took them up on that.  That allowed me to spend the later afternoon and early evening working with Michele Henry at Phoenix Paint on an article I was writing about the exterior renovation of our coach that was done by her shop from October 2011 to August 2012.  I grabbed a salad for dinner at the Martin’s grocery store on SR-19 on the north side of Elkhart, Indiana and then headed to the Lintners’ for the evening.  (BTW:  If you are in the Elkhart area and want a really nice salad, the Martin’s salad bar is fabulous.  They also have a deli counter where you can get hot items, including potatoes.  They have fountain and bottled soft drinks and a Starbucks Coffee, all conveniently located next to a two-level seating area where you can sit and eat, and they have free Wi-Fi if you want to sit and work.)

On Tuesday morning I finished prepping the bus for travel, hooked up the car, and left Phoenix Paint around mid-morning for the drive back to our house in Howell, Michigan.  I like to change up my route, so this time I took US-12 to I-69 to I-96 to M-59 to our house, with a stop at the Mobile Truck Stop on I-96 at M-52 before exiting onto M-59.  I arrived home mid-afternoon with a full tank of diesel fuel, parked and leveled the bus, and plugged it in.  Linda was in holiday shopping mode, so she wasn’t there when I arrived.

I spent the next couple of days working at my desk trying to get a few last minute things taken care of on various websites and straightening up papers.  When we are gone for a while we prefer not to come home to clutter and chaos.  Linda went to the bakery for the day on Thursday and I headed over to Micro-Center in Madison Heights, Michigan to purchase a Buffalo Technologies LinkStation 421e dual drive Network Attached Storage (NAS) enclosure and two Toshiba 3.0 TB hard disk drives.  This new NAS was an addition to our existing Buffalo Technologies LinkStation Pro Duo 1.0 TB RAID 1 NAS, which we planned to take with us in the bus.

The drives were very easy to install in the LS421e.  On power up the LS421e initially configured itself as a RAID 0 NAS, which means it combined the HDDs to appear as a single 6.0 TB drive.  The NAS Navigator 2 software that came with the unit made it fairly easy to manage the device and I reconfigured it as a 3.0 TB RAID 1 NAS, in which the two drives are mirror images of each other.  If one drive fails it can be replaced with a drive of the same or larger capacity and the new drive will become an exact mirror of the other one.  The process required some patience, however, as the RAID 1 configuration took approximately 10 hours per Terabyte, or 30 hours total, to configure itself.  The NAS Navigator 2 software tells you this in advance, so it doesn’t come as a surprise, but it is a very long time.  A bonus to the NAS Navigator 2 software is that it will manage all Buffalo Technologies LinkStation and TeraStations on the network, so I was able to use it to manage the existing LinkStation.  That was an unexpected bonus as the existing LinkStation was originally installed and managed from a workstation computer that is no longer in service.