Tag Archives: Lambright fabrics

2015/07/01 (W) Coach Supply Direct

Leave a reply

We were up at 7 AM and left at 7:45 to drive to Coach Supply Direct in Edwardsburg, Michigan.  On the out of town we stopped at Teeko’s Coffee and Tea for coffee and bagels to go.  The coffee was single origin Kenya and was very good.  We drink half-caff at home so I will check with Jeff to see if this also comes in a decaffeinated bean.

We took I-96 west towards Lansing and then took the Lansing Road cutoff to I-69 south.  We exited at M-60 and headed west towards Three Rivers.  Our plan was to drop down M-40 to US-12 for the final run into Edwardsburg but M-60 was closed in Minden and the detour took us south on M-66 towards Sturgis.  We were about half way to Sturgis when the detour turned west back towards Three Rivers so we continued on to Sturgis where we picked up US-12 and continued our westward journey.  We stopped at the McDonald’s in White Pigeon for a second cup of coffee and then finished our trip to Edwardsburg.

Coach Supply Direct is located on Elkhart Road just south of US-12.  It was easy to find and Josh greeted us as we pulled in.  We looked at his Lambright fabric samples again and were just not finding exactly what we wanted so Josh suggested we check out the selection at Pro-Forma (?) on the southeast side of Elkhart.  They are a major supplier of surplus yard goods in the area and he often gets fabric from them for projects.  He offered to go over with us but we did not want to pull him away from his work more than we already had.  He called to let them know we were coming without him.

We took US-12 back east to M-217 and dropped into Indiana where the road becomes County 17.  Just before US-20 we turned west and about 1.5 miles later we turned south onto Hall Road and pulled into Pro-Forma’s parking lot.  Bob (the owner) was out but we found Mike back in the warehouse.  He took us to the room with the sample books and we looked at a sample of every fabric they had but did find anything even close to what we were looking for.  Bob returned from his errand run and we commented that apparently plain off-white upholstery cloth was out of style.  Quite to the contrary, he said it is very much in use and as a result there is very little, if any, surplus coming out of the Elkhart-based RV manufacturers.

I took a different route back to Edwardsburg, driving through Elkhart on some streets I had not driven before.  After talking with Josh some more we had him do a final estimate (quote), sans fabric selections, as follows:

  • Two (2) Flexsteel 529 Class C captain’s chairs with skirts, adjustable arm rests, 8.5″ swivel pedestal with 20″ seatbelt bar, tan seatbelt, and slide tracks.
  • One Flexsteel 591 Class A driver’s captain’s chair with skirt, adjustable arm rests, and power lumbar option.
  • One Flexsteel 591 Class A co-pilot captain’s chair with footrest, skirt, adjustable arm rests, and power lumbar option.
  • 15 yards of additional fabric TBD.
  • Seven (7) MCD Duo Shades with dark out fabric TBD.
  • An estimate of a 2 to 6 hours labor to install everything.

Josh converted the estimate (quote) into an invoice and Linda wrote him a check for the requested 50% deposit.  He then let us select Lambright fabric samples to take with us.  We removed six from the binder rings and also took one of his sets of MCD dark out material samples.  I had planned to stop and visit with Michele Henry at Phoenix Paint but had not told her that we were coming so she was not expecting us.  By the time we left for home it was 3 PM so we waved as we drove past her shop.

Linda had packed food for the trip so she ate her vegan yogurt and got out the grapes for both of us to munch on.  Instead of retracing our route from the morning I stayed on US-12 all the way to Coldwater.  By the time we reached I-69 I was hungry so I pulled into the Walmart.  I ate my yogurt in the car and then we went in to buy Snyder’s sourdough pretzel nibblers, Blue Diamond Wasabi Soy almonds, and some mini-strudels (apple and cherry) that did not contain any animal products (according to the label).  We got on I-69 going north and I exited at M-60 for fuel.

We got home around 6:45 PM.  UPS had delivered the order I placed yesterday with Amateur Electronics Supply so I brought that in from the porch and set it aside for tomorrow.  I opened one of the boxes of Armstrong floor tiles, removed a tile, took it to the bus, and set it on the floor in the kitchen.  We took the Lambright fabric and MCD dark shade samples to the bus and had an initial look at all of them together with the walnut woodwork, floor tile, and existing wallpaper (which is going to get replaced with something).  We left them to look at again tomorrow in better/different light and went in to have dinner.

Linda reheated the potato-kale curry leftovers and served some fresh watermelon.  I checked e-mail and responded to some that related to the SLAARC website.  We relaxed by watching two episodes of “First Peoples” on PBS and then went to sleep.  It was a long, tiring day with somewhere between 350 and 400 miles of driving and 7 to 8 hours of sitting in the car.  We were glad to have the chairs and shades ordered, and to have decided (for now) to go with the custom made sofa cushions, but we were frustrated by still having the fabric and shade materials undecided.  We told Josh we would have a decision by Friday so tomorrow will be final decision day.

 

2015/06/15 (M) Cover Up

Leave a reply

Linda was originally scheduled to go into the bakery today but it got rescheduled to tomorrow so we did not have to be up by any certain time other than to be ready for the delivery of our new roof shingles.  Apex Roofing is scheduled to put a new roof on our house this week, weather permitting, and assuming they can finish up jobs they had scheduled for last week when it rained so much.

The truck from Wimsatt Materials in Waterford showed up at 8 AM with our shingles but they were unable to deliver them.  They brought them on a boom truck that was too tall to fit under the phone lines across our driveway and there was nowhere else they could position the truck that would allow them to operate the boon.  They were on the phone with their dispatcher and I called Pat Davidson at Apex roofing to let him know what was going on.  The decision was that they would be back this afternoon with a conveyor truck which would fit under the wires and be able to get the bundles up to the roof.  Pat called back to let me know they would be starting in the morning around 7:30 AM.

Later in the day someone showed up in an Apex van with a large enclosed trailer.  We moved our cars and he backed it up in front of our single garage door.  Wimsatt did not return with shingles so they will presumably deliver them first thing tomorrow morning.  They will need to back into the driveway and position the truck in front of our double garage door but that is also where Apex plans to put their debris trailer.  The guy in the van also made it sound like there would be at least six cars/trucks here needing someplace to park.  It should be an interesting morning, especially given the overnight weather forecast which includes drenching rains and possible severe weather and flooding.  The forecast for the daylight hours, however, looks OK.

After the Wimsatt truck left we finished the last batch of granola for breakfast and then got busy with our chores and projects.  Linda spent part of the day at her desk working on the financials for our local ham radio club (SLAARC).  She also tried to contact PayPal to opt out of their upcoming RoboCall campaign but was not able to get through to a real person.

I settled into my office for the morning, dealing with e-mail but focusing on editing blog posts for the last seven days.  Kate got in touch with me to see if we wanted to see The Bikinis musical production at the Meadow Brooke Theatre this week.  Wednesday through Sunday is the final run.  She also forwarded an invitation to a former colleague’s retirement gathering in a couple of weeks.

We have an RV Critter Guard that seals around our 50 A electrical cord and water hose to keep “critters” from entering the coach via that access hole.  We lost our original foam insert when I forgot to remove it from the cable entrance hole in the floor of the bus utility bay and it fell (blew) out while we were driving.  I checked the RV Critter Guard website and my exact products were not listed.  I measured our existing tongue and groove plate and then contacted the company via their contact form and explained what I needed.  I got an e-mail back indicating that my product was custom made and asking me for one additional dimension from the plastic plate.  I got that measurement and e-mailed it to them and indicated that I wanted another plastic plate and two spilt foam inserts.  I expect to receive an e-mail tomorrow with the price.  Once I have that I will call them to place the order.

I have tried several times in the last two years to order products from EZ Connector but they have always had another question for me that required me to go check something and I have never managed to close the loop with them.  I’ve been on a roll the last couple of weeks and decided that today was the day to get this done.  The company is in California, so I called them during the afternoon (my time).  The woman I spoke to on the phone gave me some good information but suggested I e-mail Joe with my requirements.  Joe e-mailed me back and answered several questions but had another one for me.  I responded to that question and went on to something else while I await the prices.  Once I have the pricing I will have to call them and finalize the order.

I exchanged e-mails with Josh from Coach Supply Direct and got a series of revised quotes from him for our new RV furniture and window shades.  What I really need are the drawings that show the exact dimensions of each piece including the size of the base and the location of the pivot (swivel) point.  Apparently he is having difficulty getting these from Flexsteel.  I would also like to have these for the Lambright Comfort Chairs but we took our own measurements at Bradd and Hall.  The whole process of getting furniture is getting very frustrating.  I need to contact Mike at Suburban Seating regarding the ISRI 6860 and pick a day to drive to ISRI USA in Galesburg to look at fabrics.  While I am at it I should probably get a price from Prevost.

I finally got back to work in the bus this afternoon.  I shut off the auxiliary air compressor, closed the valve on the air manifold that supplies air to the toilet and other house accessories, and drained the water separator.  I then investigated what will be required to remove the toilet.

There is a shut off valve on the water line behind the toilet so I closed that.  The water line is attached to the toilet mechanism with a plastic connector with two wings and looked like I could undo it by hand.  The air line looked equally easy to disconnect but the drain looked a bit trickier.  It goes out the back of the toilet rather than through the floor.  There is a metal sleeve with band clamps at each end that connects the discharge pipe to the drain line.  Fortunately the band clamp screws are accessible.

The toilet is screwed to the floor with four Philips head screws.  The centers of the screw heads are threaded and there are plastic caps with posts that screw down into the mounting screws to conceal them.  With the water, air, and waste lines disconnected once I unscrew the base the toilet should slide forward and then we may have to lift it to get clear of the water line.  The trick to getting it back in will be to get the four mounting screws back in the exact same holes.

The humidity outside was near 100% and I did not feel like running the bus air conditioners so I did not remove the toilet today.  I need to get it out, however, to remove the last few pieces of ceramic tile from the bathroom floor.  Once it is out it will have to stay out until the new floor is installed.

I tried pulling on one of the window latch knobs on the fixed window across from the kitchen counter and was surprised by easily it moved the latch.  I did not pull it far enough to unlatch it but it appears that getting the window unlatched will be relatively easy.  Getting the frame open without damaging the frame seal, and getting it closed again so it is weather tight, may be slightly more challenging.

I used a chisel to try removing the thinset and mastic that was adhered to the plywood subfloor.  It came off better than I thought it would but it was a slow process.  In addition to being humid in the coach it was very warm as I have had to leave the roof vents closed with the fans off due to the rainy weather.  I removed enough thinset, however, to convince me that it is worth renting the power floor scraper from the Home Depot in Howell for a day and see how it works.

Late afternoon Linda worked in the kitchen making another batch of her fabulous granola and a black beans and rice dish for dinner.  She soaked two Hatch chilies, two Ancho chilies, and four Pequin chilies and used them in the bean dish.  I had a call from Pat Lintner before dinner to let me know that they took their Prevost to McMillers in Nappanee and were very pleased with work and the price.

I thought about driving to the Lowe’s in Howell after dinner to order the new Frigidaire refrigerator for the bus but it got too late to go.  We have decided to have it delivered to Chuck Spera’s shop in Novi.  We can pull it inside and he has a forklift, so hopefully that works out OK.

We were both tired and headed off to bed at 10 PM.  The weather radar showed a band of more intense rain setting up to our southwest and taking aim at us.  Linda fell asleep quickly but I was still up writing when the rains started around 11:15 PM.  We had the house closed up with the air conditioner running and a small fan for air movement so the sounds of the weather are not as noticeable as when we have the windows and doorwalls open.  I checked the radar again on Wundermap and it looked like we might be in for a long stretch of persistent rain unless the line drifted south just enough to miss us.  The strongest weather in the region stretched from Ft. Wayne, Indiana WSW to just south of Logansport, Indiana but there were lots of pockets of yellow with some orange on the screen over all of the southern half of Michigan’s lower peninsula and the northern half of Indiana.  It looked like it might be another restless night.

 

2015/06/06 (S) GLAMARAMA 2015 (Day 4)

Leave a reply

Today was the last day of the 2015 GLAMARAMA rally.  It started at 7 AM with a pancake breakfast that ran until 9 AM.  For the third year the rally organizers hired Chris’s Cakes to provide the pancakes.  They had three long propane fueled griddles with sliding depositors.  The operator stopped the depositors and used a lever to release the batter for six pancakes at a time and then moved it to the next position and did the same thing until the griddle was full.  All of the pancakes had to be flipped by hand but the operators (cooks) were fast and generally accurate.  They would occasionally flip three of them into the air at once and someone would try to catch them on their plate.

Linda and both had coffee.  She had to work registration from 8 – 10 AM and left to go do that.  I was hungry so I had three pancakes even though they probably contained eggs and/or milk products.  I should have saved the calories; neither the pancakes nor the syrup had any flavor.  Zero, zip, nada, nothing; no taste.  I cannot remember the last time I had food that was that bland.  But Scott, Mark, and I settled into an in-depth bus conversation that lasted until after 9 AM and the coffee was OK.

Linda and I met up back at the coach a little after 10 AM.  I got a call from Gaye a Young letting me know we had a meeting with FMCA Executive Director Jerry Yeatts at 2:30 PM.  Linda and I went back to the Coach Supply Direct booth and talked to Josh some more about fabrics.  He confirmed that the Flexsteel 529 captain’s chair had a skirt around the base and that we could do a 2-tone fabric on the Flexsteel 591 captain’s chairs.  We got the set of Lambright fabric samples from him along with the MCD shade material samples, and took them back to our coach to study in situ.

Although we liked the Bonkers Havana fabric we had previously selected, we ultimately selected two different ones.  The Lone Wolf Brass was similar to the Bonkers Havana but lighter and much less green.  Until we saw them together we did not realize the Bonkers Havana was green at all.  The Legacy Borpeaux was a deep maroon, a color that appears in the Lone Wolf Brass and Bonkers Havana weaves.  We will use the Lone Wolf Brass as the main fabric for the 591 chairs with the Borpeaux as the inset for the lower back and center aft seat panels.  The 529 chairs will be all Borpeaux as the design of the chair does not lend itself to a 2-tone approach and we wanted some variety in the fabrics as long as they coordinated well.

The selection of materials for the MCD night shade was limited to six choices with one of them being black and another one white.  Of the other four there was one we liked (B33).  It was a bone (bisque, biscuit, etc.) color with a subtle but nice pattern.  We wanted this opaque material to be light, but not “white,” so it would reflect artificial interior light when it was pulled down.  The day shade is only available as a black fine-mesh screen.  It is designed to block sunlight during the day but allow you to see out without anyone outside being able to see in.

With our selections made we went back to see Josh and return his sample materials.  We keep feeling like we are close to placing an order but Josh needs to work up his pricing and get us the line drawings of the chairs.  For our part we need to determine the dimensions of the cushions for the sofa and talk to A–1 Upholstery and get their estimate of how many yards of material we need so Josh can order all of the fabric at one time.

We went for our first walk around the Fairgrounds for this rally, although Linda has been walking every evening with Vicki Lintner.  We were back at Building A at 12:30 PM.  Linda had signed up for the Ladies Tea, which started at 1 PM so she headed over to the Home and Arts Building and I went back to our coach.

Frank Griswold drove down and bought a day pass.  He and Sandy had planned to come to the rally in their Prevost H3-45 Vantare conversion but were unable to attend due to family issues.  Jim and Lydia Marin decided to leave and go visit their children and Tim Olsen decided to depart right behind them and get home before the rain got his newly acquired, and freshly washed, Royale Coach Prevost XL dirty.  When you have inside storage for your bus you have the option of being concerned about such things.

I was eating a sandwich for lunch, had Jasper on my lap, and was working on this blog post when Pat Lintner knocked on the door around 2 PM.  He had purchased 18″ LED replacement lights for one of the ceiling fixtures in their Prevost bus conversion and wanted help wiring it.  I took my voltmeter over to his coach to check the wiring.  All we needed to do was identify the +12VDC and DC ground wires and while it seemed obvious how the fixture should be wired I was getting some odd readings on my meter.  I did not want to rush and clip any wires until I was confident that I understood how the fixture was wired, and I had a meeting at 2:30 PM, so I told Pat I would be back before diner to finish the job.

I met with Gaye Young (FMCA national education committee chair) and Jerry Yeatts (FMCA executive director) for about 30 minutes to discuss the current status of the national education committee and its work.  I then participated in a roundtable discussion with FMCA national secretary Vicki Ferrari and six other chapter secretaries.  It was a very informative session that lasted for 90 minutes.

I had a chance to think about the fixture wiring while walking to and from my meetings, so after the chapter secretaries roundtable ended I went back to Pat’s coach, identified the +12VDC and DC ground wires, verified the voltage, clipped the supply wires, and got the LED bulbs installed in the ceiling fixture.  I was done in time to walk back to my coach, which was not far from Pat’s, drop off my volt meter and iPad, and walk over to Building A for the Volunteer Dinner where Linda was waiting for me at the front door.

We went in and were greeted by Charlie Adcock, FMCA National President, who addressed Linda as Mrs. Bruce, and then by Jane Roush, who addressed Linda as Fay, all of which she found slightly amusing.  I suggested that she had an identity crisis but she assured me she liked it that way.  Dinner was green beans in butter with bacon, mashed potatoes (milk and butter), beef tips in gravy, and dinner rolls.  There was no salad so we had dinner rolls with margarine for dinner.  Mostly we go to these events to sociable and visible but it would be nice if a bit more consideration was given to having food available for people who have gluten issues or do not eat meat, eggs, or dairy for whatever reason.  Green beans, properly prepared, are actually very tasty without butter and bacon.

We returned to our coach for a while and finished the leftover seitan stroganoff so we at least had something other than bread for dinner.  We walked back to Building A, which we are parked behind one end of, for the evening entertainment.  Sarah Ghetto performed at the first GLAMARAMA in September 2013 and was popular with the crowd so they invited her back.  She was born blind and with a cleft pallet.  The pallet was corrected surgically and she is an attractive and talented 31 year old woman with a college degree in music education and a voice that does justice to the Ann Murray covers and other songs she performs.  She owns her own motorhome and travels with her parents from her home base in Norman, Oklahoma about five months of the year.  Her dad sets up the lights and sound, MC’s the show, and plays guitar and/or sings on a few numbers, but dad makes it clear that Sarah is the star and keeps the spotlight on her.

FMCA is an International organization with members from Canada and Mexico in addition to the U.S.A. and yet they insist on hiring performers who pay tribute to the branches of the U.S. Armed Forces and sing God Bless America and other nationalist songs.  The Great Lakes Area (GLAMA) in particular includes all of Ontario and our Great Lakes Converted Coaches chapter includes members from the entire area (IN, MI, OH, and Ontario).  Our Canadian friends seem to take all of the religious-patriot nonsense in stride, but we find it inconsiderate at best and offensive at worst.  Still, we enjoyed Sarah’s concert, most of which was not this kind of stuff.  The Marlin’s also did some of this kind of music but most of their show was just great renditions of oldies.

We all walked the short distance back to our coaches after the concert and stood around in conversational groupings.  To our surprise Mark Lovegreen had pulled out.  He was headed to a relative’s farm outside Topeka, Kansas and wanted to get started with the trip.  Linda and Vicki went for a walk, as they have every evening, and returned as the daylight was fading.  They took down the American and Canadian Flags for the last time and folded them properly.

As darkness fell so did the temperature and once again it was just Scott and I having a conversation.  This time it was mostly about holding tanks.  By 10 PM we were getting a bit chilled and finally returned to our respective coaches for the night.  I had some fresh fruit for desert and then went to bed and wrote for a little while before turning off the lights.  At rallies our days usually start early, are filled with things to do, and run well into the evening.  By the end of four or five days of that everyone is tired, but it’s a good kind of tired.