Tag Archives: Joe Cannarozzi (mobile mechanic)

2016/4/16-20 (S–W) From Ham to Home (Again)

2016/04/16 (S) A Local Hamfest

I heard Butch and Fonda get in their car a little before 6 AM this morning and leave for the quad-county hamfest at the fairgrounds between Peru and Mexico (in North Central Indiana, not Central America).  I got up quietly at 7:30 AM, got dressed, put my camera in the car, and walked over to Small Town Brew to say “good morning” to proprietor Lisa Paul and fill my coffee thermos before driving to the hamfest.  As I approached the coffee shop I sensed that something was amiss.  The lights were off and something about the appearance looked different.  A closer view revealed that the interior had been redone and the name Small Town Brew was nowhere to be seen.  “The Branded Bean” was written on the window instead, but regardless of the name it clearly was not open for business.  I walked back to my car and drove to the hamfest about 10 miles away, slightly disappointed at not starting my morning with a nice cup of coffee and a cheery chat with Lisa.

There were quite a few cars parked around the venue when I arrived.  I’m not sure why, but hamfests and swap meets always seem to begin at sunrise and end by early afternoon.  Perhaps it’s a certain residual military influence or because it just leaves the rest of the day open to go home and play with new found treasurers.  Whatever the reason, I paid my $5 admission, got my door prize ticket, found Butch to say “good morning,” and then got some coffee.  Fonda was already taking her Amateur Radio Operator General Class license examination and Butch was busy with potential buyers so I walked the aisles in search of ham radio or other treasurers I could not live without, but did not find any.

Hamfests and swap meets are mostly cash only affairs unless there are larger commercial vendors there, in which case they might take credit cards.  I do not carry much cash, which is a good way to make sure I don’t spend much money buying junk I don’t need.  I did find a placemat size laminated grid square map of the United States for $5 and a laminated letter size sheet with the U.S. Amateur Radio frequency allocations for $1 and bought those.  Butch liked them so I went back and got a set for him too.  I also found some relays mounted to substantial heat sinks.  The seller had four of them for $1 each so I bought one without any specific purpose in mind.  The heat sink alone was worth more than $1 and Butch bought two of them later.

I eventually sat down at Butch’s tables and chatted with him (when he wasn’t busy) while we waited for Fonda to emerge from the testing room.  When she did she had a big grin on her face and we knew she had passed the test.  She only missed one question out of 35, which was an excellent performance.  Butch immediately got their W5YI / Gordon West General Class Study Guide and CDs out of a storage tub and put them out for sale.

Although Fonda had not studied for the Amateur Extra Class license exam she decided to take it since there was no additional testing fee beyond the $15 she had already paid to take the General Class test.  I decided to stick around and keep Butch company (not that he needed me to do that) until Fonda finished the Extra exam.  She got 19 items correct out of 50, not enough to pass but not bad for not having prepared, and it gave her a sense of what the test is like.  She wants to get her Amateur Extra license before the end of June as a new question pool goes into effect on July 1, 2016, and is very different from the current item pool.

I spent a few minutes talking to a soldier from the Indiana Army National Guard about the Hum-V they brought to the event and then returned to our rig in Twelve Mile.  I told Linda that Fonda had earned her General Class license (which Linda already has) and that Fonda was determined to get her Amateur Extra Class license by the end of June.  Not that Linda typically responds to a challenge, but this seems to have rekindled her interest in doing the same.

I had not eaten breakfast so we had vegan hot dogs and fresh fruit for lunch around noon.  I worked on blog posts until 1:30 PM when Butch and Fonda returned from the hamfest and I helped them unload their truck.  We all sat around chatting for a while but we were all very tired and Butch/Fonda needed to eat, so we returned to our motorhome to take naps.

Butch and Fonda had not reappeared by 5 PM so Linda checked to see if they were up as we wanted to go see the progress on their “new” house in Metea.  They were up so that is what we did.  We were at the house for over an hour looking at the interior reconstruction and discussing the plans for what was still to be done.  The house will not be ready to occupy this year and their hope/plan is to have it ready in 2017 before they leave again for the winter.

The property was seriously distressed but they got it for a good price.  Besides the house, which they are gutting and rebuilding inside, there is a 40′ W x 48′ L building with a concrete floor and two 12′ W x 16′ H overhead doors.  They could not build a new building like that for what they paid for the entire property.   We know, because we have been trying to figure out how to put up a similar building on our property.  Still, they bought themselves a big project and it is going to take some time and money to make it habitable and useable, or saleable if that is what they choose to do.

Fortunately they are now “retired” and still have the place in Twelve Mile to live as well as the converted bus.  Indeed, they still have an enormous amount of work to do to get the Twelve Mile property ready to sell.  It is an unusual property, having started life as a GM dealership in the 1930’s and only closing in 1981.  It then housed an electrical harness manufacturing operation before Butch and Fonda acquired it more than 20 years ago.  They turned the old showroom area into living quarters, retained the two bay auto service area for that use, as it has a functioning in-ground lift, and repurposed the rest of the space as a parts room, machine shop, wood shop, and warehouse for their business.

All told they have about 12,000 square feet under roof on two acres in the center of town on a state highway within very short walking distance of a bank and Post Office.  All-in-all, it has served their business and personal needs quite well over the last two decades but is now much more building than they need having sold off much of their business inventory in 2014 and closed Service Motors as an active supplier of parts for Crosley automobiles.  It will make an excellent building for someone, but it is going to have to be a buyer with specific and appropriate needs.

By the time we left it was 7:30 PM so we drove to the Mi Camino Real Mexican restaurant in Logansport for dinner.  Linda and I split a taco salad (no meat or dairy) and an order of vegetarian fajitas (no dairy).  We sat a long time after we were done eating just chatting before returning to Twelve Mile.  It was 9:45 PM by the time we got back so we called it a night and went our separate ways.

Back in our rig I checked my e-mail.  I had several from Gary at BCM, one of which had the first draft of the June 2016 issue.  My article on servicing the Webasto DBW2010.75 Diesel Burner is in that issue and needed to be proofread and corrections noted.  I made a first pass at that, replied to a couple of e-mails, and went to bed.  It had been a long but satisfying day and tomorrow was the first morning since this past Tuesday that we did not have to set an alarm and/or get up early.

2016/04/17 (N) Parts Shuffle

Fonda goes to church on Sundays.  She typically leaves around 9 AM and gets home between noon and 1 PM.  Butch is often up very early but not necessarily ready to interact with the world except through his computer so I tend to not bother him first thing in the morning.  We had a leisurely morning sitting around in our sweats (pants and shirts), enjoying our coffee, and eventually having breakfast.

When I finally got dressed and was in the humor to work, I unloaded the old tag axle caliper, old-old brake pads (not the ones I burned up), and the old torque plate, along with the new left-hand caliper rebuild kit, and moved them into Butch’s machine shop.  I also moved the old/broken Shur-Flo 4048 12 VDC water pump to his shop as he wants to see if he can figure out what failed and why.  With all of that stuff out of the car I repacked it to try and evenly distribute the weight of the remaining cargo.

Late morning I texted Jarel Beatty in Logansport to let him know we were here and invite him to come out and see the cabinetry he built for us last year as it was finally installed in the bus.  He had a shooting competition at 1 PM at the gun club/range near Twelve Mile and said he would try to stop by afterwards.

I had finally located the 24VDC regulator yesterday and showed Butch where it was located on our bus at the outside rear corner of the storage bay over the DS drive axle.  It was a very convenient location except that Royale Coach installed the slide out storage tray tight against the cover, making it impossible to remove without first removing the tray, which did not look easy to do.  Butch suggested that I unplug the chassis battery maintenance chargers, connect the batteries, and leave some of the bay lights on to draw off the surface charge so we could get a more accurate reading of the battery voltage later.  He also wanted to draw down the battery voltage a bit so that the alternator would have some work to do after starting the engine.

We were discussing how to deal with the failure of the regulator or alternator on the road and Butch suggested that I could always maintain the chassis battery voltage with a battery charger powered from the onboard genset.  I mentioned that besides the sophisticated, but low current, maintenance chargers that I have installed the coach came with a 24V emergency charger hardwired to the chassis batteries and powered from a 120 VAC outlet in the electrical bay.  The instructions for that charger, however, clearly indicate that it is for short time emergency charging to get the engine started and not for continuous use.  It given its age it is clearly not an “intelligent” multi-stage charger and would boil the electrolyte if left connected for too long.  Butch suggested that I remove the emergency charger and replace it with a modern, high amperage one that could be used to run the batteries and not just top them up for starting.  That seemed like a good idea to me so I added it to my (mental) project list.

Butch has been redoing the solar battery charging system on their bus and had one solar panel still to install.  Since it was loose he had me photograph the mounting rails he devised and attached to the long edges of the panel flanges.  The photos were for a future BCM article.

Jarel showed up sometime after 3 PM.  We showed him how we had installed all of the cabinetry and woodworking he had done for us based on my design drawings.  He had been in the bus several times before to discuss the project, so he had a good idea of what we were trying to accomplish, but visualizing it was one thing and seeing it quite another.  He really enjoyed seeing how the project turned out and took some photos with his phone to show his wife.

Linda started preparing dinner around 4:30 PM.  Jarel stayed and chatted until 5 PM and then went into Butch and Fonda’s house to visit with them and their dogs, Rascal (a Jack Russell Terrier), and Daffy (some kind of wire-haired Terrier mix thing).

While Jarel was visiting I borrowed a set of jumper cables from Butch and some sandpaper.  I used the sandpaper to clean the two terminals in the passenger side engine bay that are used to jump start the engine.  I then attached the jumper cables in such a way that the free ends could not touch, or the positive lead short to the chassis, by clamping the ground lead to a rail in the bay and setting the positive lead on a piece of cardboard on the ground.  I then clamped my VOM leads in the two jumper cable clamps so we would not have to hold them.

After Jarel left we checked the voltage on the battery bank.  It was 24.95 VDC.  A fully charged lead-acid battery bank at rest would be 25.2 VDC, so the voltage was reasonable given that I had the maintenance chargers off and there were some small loads on the system.  Butch had me start the bus motor, let the oil pressure come up, and then shut it off.  He had me start it a second time and then shut it off, and then start it a third time and leave it running, switching it to high idle.  While I was doing all of that he was monitoring the voltage on the VOM.

The voltage was showing just over 28 VDC, which is what we expected from a properly adjusted, correctly operating voltage regulator.  The voltage rose slightly when I switched the engine to low idle, but the batteries were probably fully charged by then and the current draw was probably minimal.  In any event it did not rise above 28.5 VDC, nowhere near the 30 VDC that would trigger a “high battery voltage” warning light on the dashboard.  There was also no indication of the alternator/regulator not producing adequate voltage as the “low battery voltage” warning light (the same light, actually) is triggered by a voltage below +24 VDC.

While the engine was running I made a mental note of the position of the needles on the two analog battery voltage gauges in the dashboard.  The “24V” gauge was higher than the 28V mark by a full needle width, i.e., there was a needle width gap between the 28V position and the left edge of the needle.  The gauge is only marked every 4 volts so it looked to me like it was reading around +29V.  The “12V” gauge was sitting right on the 14V mark.  The “24V” gauge should read 28 VDC and the “12V” gauge should read exactly 1/2 of that if the Vanner equalizers are working correctly.

Our simple test did not preclude intermittent problems with the alternator and/or voltage regulator that might occur after they were warmed up, and/or vibrating with the engine rotation at full RPM, and/or bouncing down the road.  It also did not rule out problems with the Vanner battery monitoring system, which is what controls the warning lights on the dashboard.  We also did not check the voltage at the battery bank center tap to see how closely it matched the gauge on the dashboard or how closely it was tracking 1/2 of the overall voltage as a check on the operation of the two Vanner Battery Equalizers.  Still, it appeared that the alternator and regulator were functioning correctly.

Linda made black beans and rice for our dinner and Fonda made baked squash and pork chops for their meal.  We also had carrots, grapes, strawberries, and pickled vegetables, including okra, to share around the table.  After dinner we got out our lawn chairs and sat outside for a while, pretending we were “camping.”  The air temperature dropped as the sun set and we finally put the chairs away and went inside the house to continue visiting as we had no way to make a campfire in their driveway.

By 10 PM we were all tired.  I asked Butch if I could use his big auto shop air-compressor in the morning to adjust our tires and he said he would turn it on and put the hose out first thing.  We returned to our coach and were fairly quickly off to bed.

2016/04/18 (M) Twelve Mile To Turkeyville

I was awake at 6 AM and finally got up at 6:30.  I put on my sweats, fed the cats, and prepared our morning coffee.  I noticed that Butch had already put the air hose out where I could use it so I checked/adjusted all of the tire pressures while the coffee brewed.  I also turned on the TireTraker TT-400 receiver/monitor and plugged in the repeater in the PS rear closet of the bus.  The outside air temperature was in the low 50’s F and all of the tire pressures were slightly below the cold pressures I like to run so I adjusted them.

After all of the tires were adjusted, and the air hose and tools were put away, I went inside the bus and used the monitor to check all of the tire pressures/temperatures and make a chart showing the actual and indicated values for each tire.  All of the sensors indicated pressures higher than the ones I had just set, using a known good digital tire gauge, by 1.0 to 4.5 PSI.  While this was within the specified “precision” of +/- 4% for the sensors, it was not as accurate as I think it should be.

Linda was up by this time but waited for me to have coffee and cereal (homemade granola) for breakfast at 9 AM.  Today is a travel day for us, and we would not normally have coffee or breakfast on a travel day, but we were not planning on leaving until around noon for the 3-1/2 hour drive to the Camp Turkeyville RV Resort near Marshall, Michigan.  We will also pass the Michigan Welcome Center / Rest Area and stop for fuel at the M-60 exit, so we will have opportunities to use facilities if needed.

After thinking about it overnight I decided that it did not make any sense for us to take the three new/rebuilt brake calipers home to Michigan only to have to haul them back to Indiana in a few weeks to have our mobile mechanic, Joe Cannarozzi, install them.  I borrowed one of Butch and Fonda’s hand trucks and move them from the car to the machine shop one at a time.  I then repacked the back of the car, which was now 300 to 350 pounds lighter than when we arrived in Twelve Mile.

Sometime between 9 and 10 AM I called Camp Turkeyville to make a reservation for today.  Angela was not in the office but a woman took our name and request.  The park was far from full and the reservation not really necessary, but we wanted to make sure we got a full-hookup pull-through site.  We visited for a while with Butch and Fonda before making our final departure preparations.  By 11:30 AM we were ready for the final steps in the departure process.  Linda moved the car from in front of the bus and battened down the inside of the bus while I got the shorepower disconnected.  I started the motor, let the chassis air up, and pulled it straight across the street into the grain elevator driveway where Linda pulled the car up behind it.  With the car connected and prepared for towing I restarted the bus engine and we did our light check.  Butch and Fonda walked over for one last, quick conversation and then it was time to go.  They never chat with us while we are hooking up as they know it can create a dangerous distraction.

We knew the exact route we planned to follow but entered the destination into the Rand-McNally GPS anyway.  Ever since I did the update at Florida Grande Motor Coach Resort the unit has been very sluggish in its response to screen taps but appears to still work.

I looped around through the grain elevator driveway back to IN-16 and headed east out of town.  At US-31 we headed north.  The GPS unit kept trying to get me to head east on county roads but I stayed on US-31 all the way to US-20.  At US-20 we headed east and stayed with that route all the way to I-69 in spite of the GPS unit’s repeated attempts to get me to turn north and head up into Michigan, presumably to pick up US-12.  At I-69 we headed north and soon enough we were back in our home state, the first time since November 27th last year.

About 12 miles into Michigan we stopped at the Welcome Center / Rest Area briefly and then continued or trip.  We exited again at Tekonsha / M-60 (exit 36?) and stopped at the Travel America for fuel.  The pump would not accept our Chase VISA card and we assumed that Chase Bank, ever vigilant with regards to its use as we cross state borders, had rejected it.  It turned out that the truck pumps were only set up to accept corporate/fleet cards so Linda had to go inside anyway and used one of our other cards to pay for the fuel.  All of this caused a bit of a delay but I eventually put 50 gallons in the tank.  I did not fill it because I did not want to put in the additives at this fuel stop.  I wanted to do that at the Mobil Truck Stop near our house and top it up just before getting home.

On our way once again we exited I-69 at N Drive North and a half mile to the west pulled into the entrance to Camp Turkeyville.  It was just before 4 PM and Angela was in the office and expecting us.  The site she planned to put us on had a car parked in it, without the owner around, so she moved us to a different one a few sites down.  It was a difference without a distinction and was an easy in, easy out, relatively level pull-through full-hookup site, which was all we cared about.  I adjusted the level and then shut off the motor.  The only hookup we needed for the rest of the day and evening was electricity so I took care of that and shut off the chassis batteries and air supply for the engine accessories.

Since we would only be here for one night we did not set up the interior the way we would if we were sticking around for even a few days.  We were parked facing south and the afternoon sun was bright and warm so I put out the awnings on the passenger side of the coach.  Gary, a fellow camper from a few sites down, stopped to chat and compliment us on our motorcoach.  After we wrapped up our chat we went inside and had an easy dinner.

One of our routines (traditions, rituals?) is to walk an RV park when we arrive unless the weather is very disagreeable.  The weather was near perfect this afternoon, and it was still plenty light at 7 PM, so we walked over to the Cornwall’s Turkeyville building to see if it was still open.  The building houses a restaurant, ice cream parlor, and general store.  They were open until 8 PM so we meandered through the store but did not buy anything as neither of us brought our wallets.  We strolled back to the campground and walked the outer loop before returning to our coach.

We had access to quite a few OTA TV signals and tuned in one of the CBS affiliates with a strong signal.  We watched our usual Monday evening TV programs and turned in for the night without setting an alarm.

2016/04/19 (T) Home Again

With the overnight low outside air temperature forecast to be in the upper 40’s we left the bathroom roof vent and bedroom windows open as we knew the outside conditions would make for wonderful sleeping conditions inside the coach.  We were tired, and did not have to be up at any particular time, all of which made for good sleeping snuggled under a thin blanket.  I got up at 8 AM, tended to the cats’ needs, and made 7 cups of coffee.  A little after 9 AM we had toast and preserves for breakfast.  We don’t usually have breakfast and coffee on a travel day, but today was the final leg of our winter 2015-16 snowbird season, and the trip from Camp Turkeyville to our home was only 80 miles, with rest stop opportunities along the way if needed.

Checkout time at Camp Turkeyville RV Resort is noon and our target was to pull out between 11:30 AM and noon.  Part of the reason for stopping here for one night before going home was to empty our waste tanks.  Another reason was to give us a short, easy drive at a time of day that avoided the rush hour traffic at the beginning and end of the work day.  This was the third year in a row that we have done this and it works very well.

We started tending to our departure tasks around 10 AM and would have been ready to go by 11 AM except for a very nice, but very talkative, neighbor.  Still, we were on schedule and not in any particular hurry.  We pulled out of our site at 11:30 AM and made the long, slow trip around the outer road of the campground to get back to the exit.  Once we were on I-69 N I set the cruise control at 63 MPH and let the bus roll.  I-69 between I-94 and I-96 is a concrete road made of small, discrete slabs, and you feel every joint between them.  But hey, it’s Michigan; we expect the roads to be in bad shape and we like it that way (not).  Well, apparently the majority of our fellow citizens like it that way, OR at least prefer it to paying taxes and enforcing weight limits and speeds.  If that wasn’t the case, our elected officials would do something about it.

There was rain headed our way but it was not expected until tomorrow or later.  Still, the sky was overcast and we had not traveled very far up I-69 when we started getting a light, intermittent drizzle.  It stayed with us all the way to Lansing where we picked up I-96 E.  By the time we got to exit 122 (M-52), where we stopped at the Mobil Truck Stop for fuel, we had driven out from under the rain.

Since the bus would be sitting for at least a couple of weeks I added Stanadyne Performance and Lubricity Formulas, and Racor Biocide before filling the tank.  It’s always better to have fresh diesel fuel but it is also good to store the bus with a full tank to prevent condensation from moist air in the tank.  My solution has been to use the Biocide and store the bus with a full tank.  If it is going to sit for any length of time I run the Parker Fuel Polishing Module to slowly filter it and remove residual moisture.

From the Mobil Truck Stop it was only 11 miles to exit 133 (M-59), another 10 miles to Hacker Road, and about 2-1/2 miles (on dirt roads) to our house.  This stretch of Hacker is scheduled for paving this year and we knew from the Livingston County Road Commission that work had already begun.  Indeed, the surveyors were working in the fall before we left for Florida.

The initial work this spring was the removal of trees along both sides of the road and as soon as we turned off of M-59 onto Hacker it was immediately obvious that this had occurred.  It was also obvious that the road had been very recently graded and that there had not been any rain since then.  We still took our time, keeping our speed to about 25 MPH, but it was one of the smoothest trips we have ever had in the bus along this stretch of Hacker.  To our delight, the grader had also obviously done our street recently and we noticed that a few of our neighbor’s had apparently trimmed or removed a lot of trees and bushes near the road.  Yeah!

As we got to the first of our three driveway entrances I stopped the coach and lifted the tag axle while Linda got out.  She always spots for clearance to obstructions and guides me into the final parking position.  There were a few larger tree limbs in the driveway so she picked those up before I pulled in.  Once I was positioned on the level parking pad area of the driveway I put the tag axle down.  The coach was close enough to level that I did not bother adjusting the suspension.  After letting it idle for a couple of minutes I shut off the motor and we started our arrival routine with one notable difference; Linda’s first task was to get the cats in their carriers, unlock the house, take them inside, and let them out of their carriers.  Coming home us a big deal for them, too.

I turned off the engine accessories air supply and the chassis batteries and connected the shorepower cord.  The circuit breaker for this electrical service is in the sub-panel in my office.  I turned on the wrong breaker the first time so it took a second trip to the basement of the house to get power to the coach.  We had no intention of unloading everything today but there were a few things we wanted to get into the house right away, such as wallets and keys.  At the top of my list was all of our computer, networking, and photography technology while Linda’s focus was on clothing and food.

Once we had our highest priority items moved into the house I texted the small circle of friends who we have been keeping in touch with about Linda’s illness and our bus problems to let them know we were home safe and sound with no further problems.  I then went to the garage, found our good battery charger, and connected it to the 12V starting battery in the Honda Civic Hybrid.  Brendan had told us a week or so ago that the battery was dead and when I connected the charger it would only accept about 2.5 Amps of current and quickly tapered off to less than one Amp.  That wasn’t much current for a depleted battery but I left it and went back into the house.

I checked a little while later and the charger had given up and displayed an “F01” error code.  I did not even bother looking it up as the car is a 2007 model and this was probably the original battery.  I decided to go ahead and get a new battery from O’Reilly’s in Howell, but first we had to unhook the Honda Element from the bus.  The car was filthy, having been towed at least 1,500 miles since it was last washed, but I stopped and got the new battery first and then went to the car wash just down the street on the same side of Grand River Avenue.  I then went to the Meijer’s supermarket at Grand River Avenue and Latson Road and picked up a few things.

Linda started preparing dinner at 5:30 PM and was just about to put the pizza in the oven when Butch called.  We chatted for about 15 minutes and he updated me on the removal of the radiator blowers and T-drive from their MCI MC-9 NJT bus.  This assembly is above the engine and almost the width of the bus but they were able to get it out using their forklift.  (It really is nice to have the right tools for the job.)  Butch noticed last weekend that a lot of the oil had leaked out of the T-drive and figured it needed new shaft seals, at a minimum, and might need new bearings.  With the assembly out of the bus Butch can conveniently do all of the needed work on a bench and repair/rebuild some other things while he is at it.

Our first dinner course was a nice salad with arugula and Italian kale.  The pizza was one of our favorites, an Amy’s Roasted Vegetables with Caramelized Onions.  By the time we were done eating it was almost time for our Tuesday evening CBS TV shows and I decided to replace the car battery tomorrow morning.  I did, however, move the NAS and my computer to my office and connect them to power and the Netgear switch.  To my great relief, the network interfaces on both devices still worked just fine.  Clearly, the Amped|Wireles SR20000G wired network ports had failed although I still do not know why and probably never will.

The 2015-16 TV season is coming to an end so the season finales are now airing and they are all cliffhangers, of course.  We went to bed at 11 PM, watched a rerun of Two and a Half Men, and a few minutes of The Late Show with Stephen Colbert before going to sleep.

2016/04/20 (W) Core Return

We love our bus, love being in the bus, and love the lifestyle the bus affords us.  But we are not true gypsies at heart, and we also love our house and property.  We like the anticipation of travel and the promise of new experiences, but we also like the comfort and stability of finally landing at home after a long voyage.

We slept in this morning and finally got up at 8 AM.  Some things are the same regardless of whether we are at home or in the bus, and morning coffee is one of them.  We were enjoying our morning brew when our son texted Linda to see if we were available to FaceTime.  Of course we were!  A short time later we were “face-to-face” with grand-daughter Madeline (and her parents).

Another constant is Linda’s homemade granola.  She managed to make enough of it, and/or we managed to limit our consumption of it sufficiently over the winter, that we still had some left for breakfast this morning.  We might have one or two more servings beyond today, but she will be shopping for ingredients and making a new batch very soon.  She will also be making sure we have the necessary ingredients on hand to make vegan pancakes and vegan cupcakes as we anticipate an overnight visit with Madeline in the very near future.

After breakfast we got dressed and got to work.  Linda called Alchin’s to restart our weekly trash pickup while I made a service appointment for the Honda Element.  We checked our home phone messages.  Only a handful of the 42 messages contained any actionable information.  I made note of those details and then deleted all of them.  I called Catamaran Home Delivery and ordered refills for two prescriptions.  I then called Keith at Kish Lawn Care to see when he was planning on starting our mowing this season.  Keith’s wife just had major surgery, and the grass has not grown much yet this spring, so the first cutting is probably still a couple of weeks away.

With our calls taken care of we turned our attention to replacing the 12V battery in Linda’s Honda Civic Hybrid.  The nuts on the two threaded hold down rods were badly rusted and did not want to come loose so I sprayed them with WD-40 and let them sit for a while.  I eventually got the nuts broken loose and backed off enough to remove the rods, but bent the retaining brackets in the process.  I put the rods in my bench vise, and finished removing the nuts.  We removed the old battery, transferred the anti-corrosion pads to the new battery, set it in place, and reinstalled the protective plastic 2-piece cover.  We connected the vehicle cables and then connected the good battery charger to it to bring it to full charge before trying to start the car.

Back in the house Linda unloaded containers of water from the house refrigerator and then wiped it out.  She then unloaded a few more things from the bus, including clothes and food.  I texted Jim and Kristine Gullen to let them know we were back and then started researching small tractors and mobile Wi-Fi devices.  Linda was getting ready to order an Instant Pot and a couple of 12VDC power adapters for our Rand-McNally GPS unit through Amazon and I suggested she look for the Burton portable induction cooker that we saw at Butch and Fonda’s place.  The Suntunpen unit we have now works fine but the Burton unit has two advantages over it; a completely flat/smooth top and higher maximum power setting.  She found it, added it to the cart, and placed the order.

Linda heated a can of Amy’s vegetable soup and we split it for lunch.  I checked the battery charger and it said the battery was full so I put the old battery on the back seat floor and had Linda start the car.  It started on the second try and she backed it out of the garage so I could get in.  The hybrid battery was depleted and there was a red battery symbol illuminated on the instrument panel that we had never seen before so we got the Owner’s Manual out and looked it up.  It either meant that the 12V battery was not charging or that the hybrid battery was drained below some threshold, or possibly both.  We could see the charge level coming up on the hybrid battery so we waited and the battery warning light eventually turned off.  Linda also noticed that the in-dash navigation system, having completely lost power, was requesting a security code to reactivity it.  I found the code on a sticker inside the glove box and after Linda entered it the system returned to normal operation.  When the hybrid battery charge indicator was above 50% she backed out of the driveway and we went on our errand run.

I was on Golf Club Road last night when I went to O’Reilly’s to get the new battery so I knew it was in rougher shape than usual.  We took Hacker Road south instead which kept us on pavement.  We headed back west on Grand River Avenue to O’Reilly’s to return the old battery and get the core charge refund.  We then drove back east a short way to the drive-through car wash.  Linda had not used it before and was unclear about its location.  With the car all cleaned off we headed west again to Teeko’s Coffee and Tea to order some fresh roasted coffee beans.  Jeff was there and roasted the beans while waited and enjoyed a cup of Sumatra Manhelding coffee.  We got our usual Ethiopian Yirgacheffe half-caffe blend and decided to try a Costa Rican Terrazzu half-caffe blend.

We took the long way home, going back east on Grand River Avenue and then north on Hacker.  The extra driving around gave the hybrid battery plenty of time to recharge and cycle up and down and kept our just-cleaned car mostly on paved roads.

Back at the house I backed my car up to the large garage door and unloaded everything inside in preparation for my 10 AM service appointment tomorrow at Brighton Honda.  While I did that Linda unloaded a few more things from the bus.  We had quite a few rocks on the concrete driveway, as a result of Kerry Fear plowing snow this past winter, so I swept them off with a push broom.  We also had 6″ high ‘curbs’ at our three driveway entrances as a result of recent road grading, so I graded them out using a metal toothed rake.

By the time we finished those tasks we were ready to be done with physical work for the day.  Linda decided to spend an hour or so studying the item pool for the ham radio Amateur Extra class license exam.  I gathered up the laundry, took it to the laundry room, sorted it, and started a load.  I then joined her on the back deck to work on blog posts for a while.  By 4:30 PM it was a little chilly and we went inside.  I took up my usual spot on one of the living room sofas and almost immediately Juniper (our female cat) was in my lap.

For dinner Linda made a nice salad with arugula, Italian kale, strawberries, and slivered almonds.  The main course was pan-seared tofu with caramelized onions and barbecue sauce, served with a side of corn kernels.  Yum.  After dinner Linda wanted to go for a walk so we patrolled our street from one end to the other, which took about an hour.

Wednesday night is usually PBS night for TV but neither of us were in a TV watching mood.  I went to my office for a while, checked in to RVillage, and changed our location.  I then went to the WiFi Ranger website, downloaded some manuals, and opened a support ticket.  Back upstairs I texted Joe Cannarozzi, our mobile mechanic, to arrange a time to call him and discuss brake work.  I then called Mike (W8XH) to catch up on ham radio and SLAARC stuff and check on borrowing his trailer to transport our non-functional Cub Cadet Lawn tractor to Sloan’s for repair.  By the time I wrapped up my conversation with Mike, Linda had gone to bed and was watching a program on PBS about a previous live broadcast from the Monterey Bay Marine Sanctuary called The Best of Big Blue Live.  Linda fell asleep but I stayed up long enough to watch a rerun of Two and a Half Men and the first half hour of The Late Show with Stephen Colbert while working on this post.  With the stroke of midnight came sleep.

 

2016/04/11–15 (M–F) Water Pumps on the Road Again

2016/04/11 (M) Parts Run

I was up at 7:30 AM, so I slept over seven hours last night, and felt like I had slept well enough to take on the day I had ahead of me.  I fed the cars, put fresh water in their bowl, and cleaned their litter tray.  I also cleaned part of the shower as one of them has developed loose stools in the last couple of days and has not always made it to the tray in time.  I moved the SunPass transponder, Garmin GPS, and my sunglasses to the car in preparation for my trip today.  By the time I had done all those chores Linda was up and both used our iPads for a while.  I was not going to make coffee this morning since I had a long drive ahead of me sometime today, but Linda wanted some so I made it and had some myself.  We eventually had bagels for breakfast.

I called Action Mobile around 9 AM and talked to Service Manager John Provo.  He expected my three brake calipers to be delivered between 10 AM and noon but that was just a guess on his part.  Rather than make an issue of getting a more accurate ETA I decided I would leave at 10 AM for the two hour drive from Williston to Orlando.  I went out after breakfast and unloaded most of the stuff in the back of the car and stored it on the picnic table.  I then walked to the resort office to let them know we were expecting a package from Amazon today.

Just before 10 AM I wrote out a short grocery list as I planned to stop on my way back from Orlando at The Publix supermarket on US-27 by the Ocala exit (#354) of I-75.  I took my iPad in case I needed to kill some time at Action Mobile, and actually left a little after 10 AM.

The trip down was smooth, with no traffic issues, and it was uneventful except for a text message from my sister asking me to call our broker and transfer funds for our dad.  Based on when I received it the best I could do was pull into one the Florida Turnpike Service Areas closest to Orlando’s northwest corner and call the brokerage.  The person I needed to speak to (Maggie) was on another call and I did not want to deal with a return call while driving so I left a message that I would call again when I got to my destination, which was still 20 minutes away barring any unforeseen traffic problems.

Traffic was thicker and a little slower as I neared Orlando but it moved along well enough and I reached Action Mobile just after noon.  I called Maggie again and got her this time as she is in the Central Time Zone.  Maggie is our broker’s office manager and is also a registered agent.  We have an extremely good relationship with her and our broker, John, so we chatted briefly before I gave her the transaction details.  I then texted my sister back to let her know I had taken care of her request.

I went inside and found John P. (the Service Manager).  The parts were not there yet so he called Rex at Rush Trucking to check on them.  Rex said they should have been there and made a call.  Not too long after that a white can showed up and the driver unloaded three Meritor boxes of the right size, shape, and apparent weight, and took off.

It occurred to me that I should check the parts before paying the balance and taking off myself so I opened all three boxes.  I was expecting one of the castings to have an “L” in the casting number and the other two to have an “R” in the casting number, but all three had “L”s and that caused me some concern.  I also noticed that one of the calipers had both grease fittings broken.  John P. called Rex back and Rex explained the Left and Right calipers used the same (“L”) casting.  The difference was in the helical drive shaft and gear inside, and difference was reflected in the part number on the box label.  The left side caliper part number began with “A 1” while the right side caliper began with “A 2.”   (The shaft for the calipers on the left side of the bus rotate clockwise, as viewed from the end where the slack adjuster attaches, while the calipers for the right side rotate counterclockwise.)

Rather than have Action Mobile remove and replace the damaged grease fittings Rex had a different left caliper sent over as he did not want to risk a small piece of debris falling inside the mechanism.  When the driver dropped it off I checked the label and the grease fittings.  There were OK, so he put the damaged one in his van and left.

While I was waiting I called Butch and gave him the information on how the left and right calipers were labeled.  He is working with someone at ABC Bus in Muncie, Indiana, who is working with someone at Rockwell-Meritor, who says we can still get these parts with a 45 to 60 day lead time.  I’m guessing that these are also rebuilt/remanufactured calipers, not new ones, but at this point in time we don’t really know.  He was quoted a price that was $200 less per caliper than I paid, but I have mine now, not two months from now; if in fact I could get them.

Bill, the mechanic who fixed our left tag axle brake last week, was taking his lunch break so we got to chat a bit.  John D. (the owner) was also around so we also got to chat for a little while.  I was running behind the schedule I had hoped to keep, so I loaded the three boxes into my car and went inside to pay the balance of the bill.  A quick chat with the billing clerk, Lisa, and I was on my way back to Williston.  It was 1:30 PM and I figured I would be back by 4 PM, including my stop at Publix.

I stopped at the Florida’s Turnpike Turkey Lake Service Area for some lunch but just ended up getting a frozen coffee thing at Dunkin Donuts.  Traffic moved along nicely all the way onto northbound I-75.  I had just passed exit 341 and was just 13 miles short of exit 354, when traffic came to a complete standstill.  The backup stretched as far as I could see in front of me and the flurry of emergency response vehicles driving up both shoulders meant there had been a serious accident somewhere up ahead.

It took at least an hour to reach the accident scene, where police had closed all three lanes of the highway.  All of that of traffic, which included two lanes of nose-to-tail tractor-trailers, had to funnel onto the right shoulder to get around the blockage.  The accident looked really bad and appeared to have involved at least a motorcycle, a large Suburban-like vehicle, and a utility trailer.  There may have been other vehicles involved that I did not see as I drove past or that had already been moved, although I doubted that.  There was no sign of the people involved and I presume they had already been transported from the scene by ambulances or helicopters.

Once I was past the accident I had clear sailing the rest of the way, but from the accident scene north the southbound lanes of I-75 were also completely stopped.  There were also emergency vehicles on the southbound side of the highway, but it did not appear that any of the accident was over there.  I exited I-75 at exit 354 (Ocala, Williston), made a left onto US-27, and pulled into the strip mall on the right where the Publix supermarket is located.

I took my short list of grocery items and went in.  In an unusual move for me I found everything on my list except for one item and did not buy anything that wasn’t on my list.  The only thing I could not get was fresh blueberries, which is odd because just today I had seen billboards advertising the Florida Blueberry Festival as running from April 11 – 16 in a town nearby.  Maybe all of the available blueberries were being routed to the festival?

I was back at our rig around 5:10 PM.  After getting the groceries inside, I turned my attention to reloading the car.  My first task was to transfer the new (to me) A1/Left caliper to the box the DS tag axle caliper came in last week as the box the new caliper came in was in very bad condition.  Linda found our roll of bubble wrap under the bed and I used pieces to protect the grease fittings on the top of each of the three new (to me) calipers.  (I say “new (to me)” because I believe the four calipers I have purchased are all rebuilt, and possibly even remanufactured.)

With that taken care of, I moved a couple of low boxes from the picnic table to the car and put them on the floor behind the two calipers that were behind the driver’s seat.  I then moved the tire covers from the front passenger seat and put them on top of the boxes.  The covers are a soft nylon mesh material which I figured would provide additional protection for the grease fittings.

We disassembled the damaged box to get flat cardboard pieces to use as a cushioning layer on top of the two caliper boxes that I had put inside the wooden storage structure.  The reason for all of this was that I had to store other boxes on top of the caliper boxes and, having received one that had damaged grease fittings, wanted to make sure I was not responsible for causing similar damage.  I had already taken the precaution yesterday of moving heavier items to the front bay of the bus, leaving lighter items for the car.

With the car repacked I opened the box from Amazon, which Linda said arrived around 10:30 AM, to verify that it was the correct Shur-Flo 4048 fresh water pump.  It was the correct box so I left it at that and we went for a long, slow walk around the resort.  When we concluded our walk we sat outside for a while and doodled on our iPads.  John and Ali returned around 6:30 PM.  As we suspected, they had gone out to dinner.  We presumed they had gone to The Blue Highway, but they had gone to The Olive Garden in Gainesville instead.

For dinner Linda made sandwiches with vegan deli slices and lots of greens, kind of like a salad on a bun, and sliced up a Honey Crisp apple.  It was a simple, easy meal, but it was all good.  As the hour approached 8 PM and the light faded we went next door to visit with John and Ali.  Earlier in the day John had taken one of his propane tanks over to be refilled but the person responsible for that task had not taken care of it.  When he tried to light the propane firepit it would not ignite.  We could smell the gas, and hear the spark, but if the tank was near empty it probably did not have enough pressure to make it work.  No problem; the conversation, if not the “mood,” was just as good without the fire.

It was a warm, still evening and there were more bugs out than the last few nights.  Everyone was tired by 10 PM and we all retired to our own rigs.  We watched the end of NCIS-LA and the beginning of the news and then went to bed.  I watched the beginning of The Late Show with Stephen Colbert to see Steve Martin and Edie Brickel, and then went to sleep.  Although I had not really done very much it had been another long, and somewhat stressful, day.

2016/04/12 (T) Water Pump Up

I got up at 7:30 AM and quietly took care of the cats’ food, water, and litter tray.  I measured out the beans for our morning coffee but waited to grind them until Linda was up.  I updated my spreadsheet for GLCC parking at the upcoming FMCA GLAMARAMA16 rally in June and then continued working on my blog post for yesterday.  When Linda got up at 8 AM I finished making the coffee.  We then spent a couple of hours engaged in our usual morning routine of using our iPads while enjoying our coffee and having granola with fresh strawberries for breakfast.

By 10 AM we were dressed and I got to work replacing the fresh water pump.  The pump is a Shur-Flo 4048-153-E75.  It is a 4 GPM (max), 55 PSI (max), self-priming, 12 VDC pump with thermal overload protection and the ability to run dry without damage (although our friends, Butch and Fonda, discovered that it cannot do this for an extended period of time).  Shurflo also makes this pump in 24 VDC and 120 VAC versions.  I am seriously considering adding a 120 VAC pump to the water system when I redo the utility bay, but I would like something a bit more robust.  I seem to recall that Chuck has a Paragon AC powered pump in their Liberty conversion and it impressed me as a very serious piece of equipment.

Since the new water pump was an exact replacement for the failed one installation was very straightforward.  I shut off the incoming fresh water line as a precaution and had Linda make sure the pump power was switched off.  I then disconnected the two power leads which I had wired using mating insulated spade connectors.  There are two fresh water supply lines, each of which gas a 1/4 turn shutoff valve, so I closed those.  (The conversion had two domestic water pumps plumbed in parallel when we first bought it.  I replaced them with a single 4048 and removed the surge tank at that time as Shur-Flo recommended not using one with the 4048 pump.)  The threaded water line connections to the pump are plastic and only hand tightened, so were dealt with easily.  Before removing them I got a towel to absorb the water that was inevitably going to drain out of the lines.  Once the lines were off I removed the four screws that secured the unit to the floor through the rubber shock mounts.  The unit was now completely disconnected and I was able to remove it.

The new and old water pumps along with tool boxes and other stuff needed to make the repair.

Installing the new unit was basically a matter of reversing the steps just described, more or less.  I  needed to attach the proper insulated spade connectors to the power wires on the new pump.  I found my spade lug kit and even though I had a variety of connectors I did not have the ones I needed.  Fortunately there is a NAPA Auto Parts Store very close to Williston Crossings RV Resort and auto parts stores are an excellent place to find a large variety of spade connectors.  It’s walking distance to the store, but I drove there to save time.  I bought several different packs to make sure I had what I needed.

Back at the bus I prepared the power leads and set the new unit in place.  I connected the water lines first as it was easier with the unit loose.  I connected the power leads and then screwed the unit to the floor.  The new pump came with a strainer and adapter fittings.  I used the new strainer bowl to replace the old one, in which I found little curly queues of plastic.  I opened the two shutoff valves and then had Linda turn on the power to the pump and open the kitchen faucet so that both the hot and cold lines were open.  The unit came to life and water flowed, albeit with a sputter until all of the air was out of the lines.  With that, the water pump problem was fixed and I cleaned up the work area and put my tools away.

Next on my task list was checking tire pressures.  I really did not want to check all 12 tires with the digital gauge so I turned on the TireTraker TT-400 TPMS and waited 20 minutes for the readings to update.  Although the sensors are not “dead on” accurate they are close enough to let me know if a tire has lost enough air to require topping up.  They all appeared to be OK so I did not have to get out the air-compressor and air hose.

Barring any further unforeseen circumstances this was our last planned night in Florida for the 2015-16 winter season.  We wanted to go to Satchel’s in Gainesville for pizza one last time.  We decided to have an early dinner and take care of a couple of errands so we left at 2 PM.  Our first stop was at the Kangaroo filling station for gasoline.  Our next stop was Pet Supplies Plus in the Archer Road mega strip mall shopping complex.  We also stopped at the CVS pharmacy in the same complex and then drove to Satchel’s on the east side of town.

Although it was a lovely afternoon, weather wise, we chose to sit inside.  At Satchel’s we had our usual meal; an excellent salad and a pizza with mushroom, onion, sun-dried tomato, and Daiya non-dairy cheese.  It is, quite simply, one of the three or four best pizzas we have ever had, and it is vegan!  We got their largest pie and brought most of it home.

When we got back to Williston Crossings John and Ali were not around and we figured they had gone out to dinner again.  Happy hour usually takes place at Jeff and Kathy’s 5th wheel so we walked down there to visit for a while.  John and Ali eventually returned and as evening fell over the resort we went next door to sit around their propane campfire and visit.  Smitty made a large bowl of popcorn popped in peanut oil and lightly salted with Hawaiian sea salt.  Yum. Note for T 20160412 blog post.  Jim and Janet Rawley came over to John and Ali’s site to visit and John played his guitar and sang for a while.  Jim’s professional name is “Sonny Fox” and he was a big time rock ‘n roll D. J. during the ear when radio stations started playing “album rock.”  Jim quizzed me about my musical background and the first record (45 or LP) that I bought but I had no recollection of that.

We returned to our rig just before 10 PM and were in bed, with the lights out, by 10:30 as we planned to pull out of our site around 7 AM in the morning.  Tomorrow we head north and leave Florida.

2016/04/13 (W) Unbalanced Travel

I set an alarm for 6:20 AM and we got up at 6:30 and got dressed.  Today was a travel day so we did not have coffee or breakfast.  While we prepared the interior of the coach for travel I encountered a problem with the 12 VDC charging plug for the Rand McNally TripMaker RVND 7710 GPS unit.  A small threaded plastic insert, which holds the spring-loaded +12V center contact, had broken and could not be repaired on short notice (if at all).  The two lower 12 VDC “cigarette lighter” outlets were dead again and it occurred to me that the failed plug might have been responsible for shorting the outlet and blowing the supply fuse last Wednesday.  Not realizing this at the time, and desperate to get the GPS back into service, I vaguely recall having plugged it into one of the upper outlets and probably shorted it out too.  I replaced all of the blown fuses last Wednesday but did not realize at that time what the root cause was and was rather perplexed by the failure, which reoccurred on the lower pair of outlets.

I removed the R-M GPS from its usual mounting position (on the driver side lower windshield next to the center pillar and resting on the top of the dashboard cover) and set it aside and I installed the Garmin 465T GPS unit in its place.  I took care of the remaining outside tasks of disconnecting/storing the shorepower cord, connecting the chassis batteries, and opening the auxiliary air supply valve for the engine accessories.  Linda moved the car to another site so it was out of the way as I started the bus motor and aired up the chassis (brakes and suspension).  She then spotted for clearance from obstructions as I slowly and carefully pulled out of our site.

We wanted to be on the road at 7 AM but it was about 10 minutes past the hour when I finally pulled out of the site.  Our friend and neighbor, John (Smitty) Smith, was up and outside to wave goodbye, which was nice.  I proceeded north through the resort on Covered Bridge Road and Linda followed in the car.  We drove through the covered bridge, for which the road is named, and stopped just short of the north bath/laundry building to hook up the car for towing.  There are no park model trailers or RV sites close to this location, so we knew we could hookup here without bothering anyone.  With the car attached we double checked the settings and then did our light check.  Everything was OK so Linda got into the coach and we set our destination in the Garmin GPS unit.

We finished our slow roll through the RV resort, out the back/northwest gate, and pulled out onto FL-121 headed northeast towards Gainesville.  About two miles from I-75 we encountered stop-n-go traffic.  The morning rush hour in Gainesville was underway and was something we had not previously experienced.

Linda kept a close eye on our tire pressures and temperatures, especially the driver side tag axle, as we rolled along.  We stopped at the Pilot station at Exit 460 and took on 60 gallons of diesel fuel.  That was our last stop until we got to the end of our trip for the day.  I would have liked to note here that the trip was uneventful but, alas, that was not the case.

The drive up I-75 through northern Florida and southern Georgia is generally an easy one, without any serious grades to climb or descend, attractive enough scenery, and reasonable traffic volumes except during the April 1st northward snowboard migration.  As we got to the Macon, Georgia area and then on up to Atlanta, traffic was heavier but moved along.  Somewhere along the way the Battery Balance (BAL) light came on, flickering at first but then staying on.  Not good.

The Battery Balance light is controlled by a Vanner Battery Monitor Module and is supposed to indicate that the “12V” center tap on the battery bank is not within +/- 0.75 VDC of 1/2 of the voltage between the “24V” terminal and ground.  The relationship of these voltages is supposed to be regulated by a pair of Vanner Voltmaster Battery Equalizers.  It is normal for this light to come on occasionally, especially when starting the motor, but it is not normal for it to come on and stay on.  Assuming the monitor module is not defective, it means the 12V center tap is out of tolerance with respect to the 24V terminal and implies that the Vanner equalizers are not doing their job.  Ugh.

Having the yellow Battery Balance (caution) light come on immediately added stress to the trip but when the red Hi/Low Battery (warning) light came on the stress level went way up.  This light is also controlled by the Vanner Battery Monitor Module and is (supposed to be) activated if the voltage at the “24V” terminal (relative to ground) is less than 24V or more than 30V.  Voltages outside the 24 – 30 VDC range could indicate a malfunction of the voltage regulator and/or engine-mounted alternator.  Either one would be a problem that could put the bus on the side of the road as the engine is controlled by a computer that is powered by the chassis battery 12 V center tap.

The normal full-charge resting voltage of a “24V” lead-acid battery is 25.2 VDC (12 cells in series at 2.1 volts per cell) and the normal voltage at the 24V terminal with the motor running is around 28 VDC, so the 24 – 30 VDC range is a reasonable one. I also have 24V and 12V analog battery voltage gauges in the dashboard that are connected to the batteries independent of the Vanner Battery Voltage Monitor Module.  While they would also show high or low voltage conditions, and, by comparison, a battery imbalance condition, it is appropriate to have warning lights to get your immediate attention as you might not notice the gauges for a while.  What was odd about this situation was that the 24V gauge was sitting at about the 29V position and the 12V gauge was sitting at about the 14V position.  I knew these gauges worked because they do not always show these readings, but I did not know if the readings were accurate.  They are, however, close to what I normally see, and they do not usually result in caution or warning lights.

We left I-75 (GA) at exit 296, Cassville-White Road, drove 0.2 miles east to the Pilot truck stop, and got in a long to wait for a pump.  When it was finally our turn I added 92 gallons of diesel fuel.  From the truck stop we drove west back towards I-75 and continued 0.5 miles on the other side of the highway before turning left into the Cartersville Castle-White KOA.  Linda was hearing and speaking well enough by now to be able to register us, which is normally her job.  We were escorted to a water/electric pull-through site in the center of the park with less than ideal access but I was able to get in and park the bus.  We leveled as best we could, shut off the engine, batteries, and air and then plugged in the shorepower and turned it on.

Linda made a really good salad for dinner and we each had a piece of leftover pizza, slightly warmed.  Yum.  After dinner I made calls to Joe Cannarozzi, Ed Roelle, and Butch Williams and sent a text to Pat and Vickie Lintner.  Joe was working on a coach in Williamston, Michigan and was looking for a local facility that could service the over-the-road air-conditioning system.  Ed has been around converted buses in Michigan for a long time so I contacted him to see if he had any suggestions for Joe.  We went for a long walk around the campground during which I had a long chat with my sister.  When we got back to our coach I exchanged text messages with Smitty back at Willison Crossings RV Resort.

Our TV options were limited but we were able to get PBS, so we watched whatever was on.  We planned to pullout out of our site at 7 AM, which meant we had to be up around 6:15.  Not that we have that much to do, but we do not like to rush through our morning routine.  We were in bed with the lights out by 11 PM.

2016/04/14 (R) A Relatively Smooth Run

There was a possibility of rain last night so we closed all of the roof vents and narrowed the window openings before we went to bed.  I set the alarm on my phone last night for 6:15 AM this morning, but I was aware of the rain, and woke up around 4 AM when I heard one of the cats making a strange noise.  I wanted to turn on the electric engine block heater anyway so I got up and did that, checked on the cats (they were fine), and went back to bed.  I tried to go back to sleep without complete success.

We finally got up to stay at 6:30 AM and got dressed.  I had an e-mail from Gary at BCM that needed a reply and cc:d Dave Aungier.  I also texted Dave as he was who Gary needed to contact.  I shut down all of the technology and packed up my computer while Linda cleaned off counters and secured windows.  The car was already connected for towing so we just had to go through the towing procedure and double check it.  I disconnected and stowed the shorepower cable, connected the chassis batteries, and opened the air valves in the engine bay.  I started the engine and we did the light check while the chassis aired up.  Since it was 7 AM we tried to avoid idling any longer than necessary before pulling out.

We were in an angled water/electric site in the middle of the campground with fairly tight ingress and egress.  I raised the tag axle so shorten the turning radius and pulled out while Linda kept an eye on the driver side front corner.  I had to get the driver side nose of our coach fairly close the passenger side rear corner of the 5th wheel trailer directly in front of our site in order to get our passenger side rear end and toad to clear a tree on our site and a post near the road on the next site to our passenger side.  I also had to avoid the rear end of the next 5th wheel trailer and the picnic table in-between them.  Fun.

Without being over-confident, I think I have gotten a lot better at maneuvering the bus in tight situations.  That skill has come with some good teaching, some practice, and at the expense of two mistakes that caused some damage, but it certainly paid off this morning.  Once I was cleanly out of our site and into the road I stopped and put the tag axle down.  Linda got on board and we rolled slowly out of the center of the campground and headed for the exit.  We stopped before exiting so Linda could find Juniper.  We knew she was onboard, but we wanted visual confirmation before pulling out.  Linda found her under one of the living room captain’s chairs, and we were on our way.

We recharged the Rand-McNally GPS last night using a 12 V car outlet splitter with USB ports and a compatible USB cable that I borrowed from the Sony a99v DSLT camera.  Linda turned it on and entered the address of today’s destination to verify that the unit was working.  It was, so I set it up on the dashboard by the windshield center pillar so it was ready to go this morning.

Our route took us north on the final 70 miles of I-75 in Georgia to Chattanooga, Tennessee where we headed northwest on I-24.  I-24 was mostly in Tennessee, but dipped back into Georgia briefly as it swung around the southern side of a mountain.  Unless you head far to the west on I-10 before turning north, there isn’t a practical way to get back to Michigan from Florida without crossing mountains.

As you head north from Florida on I-75 the ground rises steadily.  As you approach Atlanta it starts to get hilly, and that continues north of town all the way to Tennessee.  As soon as you head west on I-24 you are perpendicular to mountain ridges running SW to NE.  The highway winds around these ranges, sticking to valleys as much as possible, but inevitably there comes a point where it simply has to go over the top.  And so it did.  I think the grade was at least five miles long, perhaps seven, with lots of turns but nothing I would call a switchback.  The road surface was excellent with wide lanes and truck lanes.  The grade was just steep enough that I had to climb it in 4th gear doing around 50 MPH at 2000 RPM with 14 to 15 PSI of turbo boost.  With cool outside air the engine coolant temperature never rose above 195 degrees F, which is its normal operating temperature (on the gauge) and I was very pleased with the way the bus ran.  Replacing the turbo boost sensor tube last year was no doubt partly responsible for this performance.

The temperature was in the low 50’s when we left the Cartersville Castle-White KOA around 7:15 AM and we ran through cool temperatures under overcast skies, with intermittent drizzle and fog, all the way over the mountains in southwest Tennessee.  Once we were on the northwest side of the mountains the cloud cover started to break up and reveal patches of blue sky.  Somewhere southeast of Nashville we encountered our last raindrops and by the time we merged onto northbound I-65 we had clear, blue skies.  Traveling “north” from late morning to early afternoon we had the sun at our backs, making for a comfortable cockpit without using the air-conditioning.

I was concerned about the issue we had yesterday with the Battery Balance (BAL) telltale caution light and the Hi/Low Battery (Voltage) telltale warning light and presumed it would reoccur today.  In order to reduce the chance of that happening again today I tried to minimize the power draw from the +12 VDC center tap of the chassis batteries and perhaps cause an imbalance between the upper and lower halves of the battery bank.   To that end I did not use the cockpit HVAC fan and kept the headlights off as much as possible.

We had a pretty smooth run all the way to and through Nashville.  Pat and Vickie had alerted us to “construction on I-65” but were not more specific.  North of Nashville we encountered a major construction project that lasted for at least 20 miles.  Traffic flow, however, was very smooth if a bit slower than normal posted speeds.  As we approached Louisville we saw signs announcing major construction ahead and advising I-283W as an alternate route.  We were less than 15 miles from our destination and needed to take the second exit just after the bridge so we rejected the alternate route suggestion and stayed on I-65.  The construction was, indeed, major—the reconstruction of a bridge over the Ohio River—but we made it through without having to stop.  The campground website had very specific and detailed directions on how to exit I-65 and we followed them instead of the GPS.  We were momentarily confused after exiting, never a good thing when driving a bus in an urban area, but we were in the right place and made the last couple of turns to get to the Clarksville KOA campground without difficulty.

Linda checked in at the office and the woman at the desk lead us to a pull-through site that was very easy to get into but might be challenging to exit in the morning.  We were sitting level without having to adjust anything so I shut off the engine and we went through our usual arrival routines.  Linda then walked over to the office and finished registering us.

We walked the park, which was not large, and scoped out our departure route and any possible problems.  The sites here are closely spaced, the roads are a little narrow, and some campers are parked with their vehicles sticking part way out into the road.  Some of the people camped here appeared to be younger men who were itinerant workers.  As such, we suspected they might be gone in their cars before we pulled out in the morning.  If so, we will probably get out OK without having to unhook the car, but I doubt that we will ever return here.  While the location is convenient to I-65 and Louisville, the park itself is not worth the $50 a night they charge.  If not for the location, it wouldn’t be worth half of that.

We did not plan to unhook the car to explore the area and there did not appear to be anywhere to walk although Vickie had texted us that we were only a half mile from the river and there was, in fact, a nice walk down to there.  Even so, we were tired and perfectly content to retire to our coach, have dinner, and watch our favorite Thursday evening CBS comedy shows.  We went to bed at 11 PM as we planned to be on the road at 7 AM so we could be at Butch and Fonda’s home in Twelve Mile, Indiana before noon.

2016/04/15 (F) Back In Twelve Mile Again

I set the alarm on my smartphone last night for 6:30 AM this morning.  Like last night, I woke up around 4 AM, turned on the engine block heater (electrical), and tried to go back to sleep.  I was awake again before 6:30 and the alarm was just my signal to actually get out of bed and get dressed.  Linda woke up with the alarm and was also up and dressed fairly quickly.

As usual for a travel day, we did not make coffee or have breakfast and instead set about preparing the coach for travel.  I had turned off my computer last night so all I had to do was pack it up.   We also left the car and bus connected together, so all we had do was check the connections and go through the towing procedure.  I turned the block heater and Aqua-Hot electric heating element off, disconnected the shorepower cord and stowed it, opened the auxiliary air supply valves, and started the main engine.  We did a light check while the chassis aired up and then Linda climbed aboard.

I was concerned about getting our rig out of the small, tight site and through the narrow interior gravel roads of the campground, but our neighbor’s to the left moved their truck before they went to bed last night and the guy directly in front of us on the other side of the street left in his car just before 7 AM, presumably to go to work.  That meant I had plenty of space to pull forward and to turn to the left, which is the direction the site was angled.  By 7:25 AM we were exiting the park and on our way to Twelve Mile, Indiana.

Although we had less than 200 miles to travel today, I-65 continued to be one long construction zone with lots of very rough surfaces which made for more difficult and tiring driving.  In-between Clarksville and Twelve Mile was Indianapolis, so that meant major urban traffic.  “Indy” is a major shipping hub with a good, but extensive highway system.  I-465 circles the metro area while I-65, I-69, I-70, and I-74 all tie into it, along with several U.S. highways.  The speed limit is 55 MPH and most drivers seemed to obey it, which made for easier urban driving, but there was still a LOT of traffic.

As we got on the north side of town headed west we were looking to exit onto US-31 north.  The GPS told me to exit at Keystone Avenue and turn right onto the relatively new Keystone Parkway, which bypasses the initial stretch of US-31 before joining it some miles farther north.  Fortunately I spotted a sign before exiting the highway that said vehicles over 19,000 pounds GVW were not allowed on the Parkway.  Also fortunate was that I knew the exit for US-31 was only a couple of more miles ahead and was a perfectly acceptable place for us to get off of I-465.  I had not been this way in a while and discovered, to our pleasant surprise, that it is a completely new, limited-access highway heading northbound.  Sweet.

We handled the situation smoothly and without too much consternation, but it was concerning that our GPS tried to direct us onto a road for which we were too heavy by more than double.  That had us wondering if the RV characteristics parameters were not set correctly, and perhaps got reset when I updated the unit while we were at Florida Grande Motor Coach Resort, but now was not the time to check all of that.  This is a relatively recently rebuilt roadway, and it was been my experience with both GPS units that the map updates do not include these newer roads.

Another possibility was that the Indiana Highway Department has not updated the state road database as that is where Rand-McNally (and other mapping companies) get the information for their road maps.  I encountered this a while back when traveling US-24 from Peru, Indiana to Defiance, Ohio.  Even though my GPS database was up to date, it had no knowledge of the new construction between Ft. Wayne, Indiana and Defiance.  The same us still true of the new stretch of US-31 running south from US-20 for many miles even though it has been open for quite a while.  The State highway departments are responsible for updating the database that the GPS/mapping companies use.  If they do not update the database there isn’t much the GPS/mapping companies can do.

Indiana has made major improvements to US-31 over the last 3 to 4 years, building whole new limited access sections.  Besides the section coming south from US-20 and the section going north out of Indianapolis, there is one that now bypasses Kokomo.  The older sections are four lane divided but have grade crossings and occasional traffic signals.  They are posted at 60 MPH and traffic is usually light and moves along well.

All-in-all we had an easy final leg from Indy up to State Road 16 and west into Twelve Mile.  At 11 AM, just 3-1/2 hours after we pulled out of the Clarksville KOA we were back in Twelve Mile again.  We pulled into the gravel driveway for the grain elevator, which is not in use this time of year, to unhook the car.  The driveway is exactly opposite where I park the bus when it is here and positions me to basically back across SR-16 into our spot next to Butch and Fonda’s bus.  Linda spotted for me as I backed across SR-16 and into our spot.  I leveled the coach, shut off the engine, and took care of the exterior arrival tasks while Linda took care of the interior ones.

Butch and Fonda did not come out of the house and we were not sure they were home.  We usually have a very poor Verizon signal when the bus is parked in this spot, and today was no exception, but I was able to get our Verizon Mi-Fi online.  About that time Butch and Fonda came out to check on us and we visited for a while.  We had not knocked on the door because we knew there was a possibility they might not be home when we arrived.

Butch needed to be at a local county fairgrounds at 5 PM to help set up a large room for a hamfest tomorrow.  Fonda was reviewing for the General Class license exam, so Linda studied her Amateur Extra Class flash cards with Fonda while Butch and I went to the do the set up.  The hamfest was an annual joint event put on by four county amateur radio clubs.  After the tables were all set I helped Butch carry in all of the stuff from his truck and arrange it on three adjacent tables.  When we were done, and there was nothing else to do, we returned to Twelve Mile.

It was 6:30 PM by the time we got back and we decided to go out for dinner even though the options for us are very limited.  We drove to Rochester hoping to eat at a Mexican restaurant but it was closed (permanently).  We ended up at Tweedle Dee’s instead, mostly because they have a salad bar.  We were the last diners to leave and only then because they needed to run the vacuum cleaner which cut off any chance of Linda hearing any further conversation.  We stopped at Butch and Fonda’s new (to them) house on IN-25 in Metea but Butch did not have the key with him so we did not get to go inside.

By the time we got back to Twelve Mile we were all tired.  Butch and Fonda had to be up very early to go to the hamfest so they signed their tax returns, got them ready to mail, and brought them to our bus for Linda to mail in the morning.  I planned to go to the hamfest too, but not first thing in the morning.  I also wanted to take our car so I could come back to Twelve Mile before the hamfest ended at 1 PM.

Our series of equipment failures seems to be continuing as I was unable to get the Amped|Wireless SR20000G router/network-extender to recognize any hard wired devices.  I tried plugging in both my computer and our NAS to all five of the ports but none of them responded to either device.  It’s unlikely that the wired networking had failed on both the computer and the NAS so the failure of the SR20000G is the more likely cause.  The SR20000G’s wireless networks are still working but the loss of the wired ports means I cannot access the NAS.  Fortunately we will be home in a few days and I can try to sort this out in the comfort of my office.

Being tired, and with no TV reception, we were in bed by 10:30 PM and I was asleep by 11 with no alarm set for the morning.

 

2016/03/18-20 (F-N) Detailing Brakes FGMCR Finale

2016/03/18 (F) R. V. Detailing

I was up at 7:30 AM, fed the cats, and made coffee.  Linda got up at 7:45 and got dressed even though she was obviously not feeling well and probably did not get a good night’s sleep.  I cleaned the cats’ litter tray and then got dressed.  We were expecting Nick’s R.V. Detailing sometime between 8 and 9 AM so we wanted to be up, dressed, and done with breakfast before they arrived.  Nick called at 8:20 to let me know he was running late and expected to be here around 10 AM.

We woke to overcast skies but by 8:45 the clouds had thinned considerably and we had direct sunlight on the driver side of our motorcoach.  A couple of days ago the forecast was for a 100% chance of rain today, not good for washing and waxing an RV outdoors, but that changed to 0% with overcast skies, which was perfect for the task at hand.  Either way, the high temperature was forecast to be 87, which is probably warmer than ideal for Nick, but it will be what it will be.

The delay in Nick’s arrival gave me time to finish my coffee and doodle on my iPad for a while before getting to work.  Linda went back to bed while I finished getting the outside of the bus ready for detailing.  I was able to unsnap all of the new windshield covers using the Zip Dee Awning rod except for one snap and the entry step stool got me up high enough for that.  I needed the 3-step stool, however, to get the covers off of the upper windshield wipers.  Linda came out in time to help me roll up the windshield covers, put them in their mesh storage bag, and store them in the front bay.  I moved the two Coleman bag chairs and the folding plastic side table to the pad area behind the coach house.  We went back inside to await Nick’s arrival and worked at our computers.  Linda eventually went back to bed.

Our Verizon billing cycle ends at midnight tomorrow night and as of 8:30 this morning we had 1.7 GB of data remaining out of 12.  We have done well managing our limited data plan this winter by taking advantage of free Wi-Fi connections to the Internet at Williston Crossings RV Resort (WCRVR), Big Tree Carefree RV Resort (BTCRVR), and now Florida Grande Motor Coach Resort (FGMCR).

The Internet connection at WCRVR was outstanding; fast and usable from our coach.  The Wi-Fi at BTCRVR and FGMCR was only available at the clubhouse buildings, but at least we had that.  The speed at BTCRVR was slow but usable while the speed at FGMCR has been pretty very good.  (Our Verizon cellular data speed at Florida Grande has also been the best we’ve seen this winter.)  We added 2 GB to our data plan in mid-January for three billing cycles by downloading and activating Verizon’s Go90 app.  We have not used the app, and don’t intend to, but the extra 2 GB of data certainly has helped and will get us through the remainder of this winter season.

We don’t stream videos so for us the main data management trick has been to defer as many updates as possible for our phones, iPads, and computers until we are connected to the Internet via a park Wi-Fi system.  We were forced into this tactic when needed to upgrade our computers to Windows 10 while we were at BTCRVR in January.  While that has meant taking our devices to a clubhouse, we have often combined this with doing the laundry.  Both BTCRVR and FGMCR also have libraries (FGMCR’s was especially nice) which provided comfortable/quiet places to sit and read or use another device while one updated.

Nick’s Detailing cleaning up our coach at FGMCR in Webster, FL.

Nick and his helper showed up around 10 AM as promised and got to work detailing our bus.  The trailer that Nick tows behind his F-250 has a pressure pump, a water heater, a pair of tanks for de-ionizing water, and a large plastic tank for holding the de-ionized water.  It also has large reels for long hoses and the various spray wands and other tools needed for their work.  They even carry a large rotary brush for cleaning concrete, which is one of their other services.

Linda spent most of the day in bed.  She rarely gets sick but this is the second time this winter, and both times it has hit her hard.  I took a few pictures of the Nick’s equipment, and of the two of them working, and then retreated inside the bus to work at my computer.  Other than an occasional e-mail my focus was on editing and uploading blog posts.  I uploaded the ones for December 1 through 6 to our website and edited the ones for the 7th through the 14th.

UPS delivered my Prevost parts order around 2 PM so I took time out to check it.  I had four packages with tags whose Prevost part numbers matched the packing slip which matched what I ordered.  I did not, however, open the individual boxes.  I also took a few minutes to upload the February and March 2016 issues of BCM to our Dropbox and e-mailed the link to Steven Gullette.  Steve was out team leader on the July 2016 Habitat For Humanity build in Sheridan, Wyoming and my 2-part article was about that experience.  I got a text from Joe letting me know that he was headed our way and found a place to stay.  He was going to check in and get a shower and would see us first thing in the morning.  I texted back to confirm and let him know that the parts had arrived from Prevost.  Linda got up around 4:15 PM and had me send a text message to Mara letting her know that we would not be able to make it to the water skiing show tomorrow in Winter Haven.

Nick and Jesse finished up at 5 PM.  They had also pressure washed the car for an extra $10 so the total was $310.  That was 12 man hours of work plus equipment and product and seemed fair to me.  (I knew the price in advance.)  They used Turtle Wax Platinum automotive wax, and it looked good.  They applied it with a buffer and rubbed it out by hand.  I’ve cleaned and waxed our coach by hand, so I know how much work it is.

I was putting the water softener, pre-filter, and bag chairs away when René and Ruth stopped in their golf cart.  They are long-term renters here.  This is their 4th season at Florida Grande MCR and they rented a site for an entire year but do not plan to be here all of that time.  They noticed that we had a vendor here last week (Bill and Brenda Phelan) making our windshield covers and wanted to know where we got the tire covers.  I chatted with René for quite a while before we walked back to the golf cart and included Ruth in the conversation.  They have rented a site for a month at one of the luxury motorcoach resorts in Petoskey and wanted to know more about the State of Michigan.  I agree to e-mail some information to them later this evening.

Linda was still under the weather and wasn’t hungry but I convinced her that it might be good for her, physically and mentally, to go for a walk around the resort.  She agreed and we took a slow stroll around the front/main loop.  Back at the rig I had a bowl of granola for dinner and got a call from Pat (& Vickie) Lintner to check on the progress of our brake repair.  They also wanted to know if we would be interested in going to Epcot for a flower show sometime while we are at Jetty Park.  They would drive as they already have a season parking pass.  They also have season passes to the Disney World complex but we would have to buy day passes for $100 each.  We said we would consider it when Linda was feeling better, but I doubt that we will shell out $200 just to spend seven hours looking at flowers no matter how spectacular they are.

We have had some expenses this winter that we had not planned on, but we were glad to be able to get tire and windshield covers from Bill and Brenda Phelan while in south-central Florida and consider them a necessary investment.  They are well made and they work, and Bill and Brenda are fellow converted bus people running a small business that we wanted to support.  We were also glad to be able to get our motorcoach washed on January 1st in Arcadia and then get it washed and waxed today at FGMCR.  We have a lot invested in our home on wheels and taking care of the paint is just one of many necessary maintenance expenses.

The problem with the driver side tag axle brake, however, was something we just did not see coming.  As of this evening it is not yet resolved and thus the final cost is still unknown and unpredictable.  It’s hard to consider spending $200 to look at flowers right now but our view of that may change if/when the brake problem is resolved and the final cost is known.  What this brake failure has raised, however, is the necessity of also rebuilding the passenger side tag axle disc brake caliper and both of the steer axle disc brake calipers.  The cost just for parts is approximately $500 per hub plus $280 per axle for brake pads, if needed.  In round numbers that is $2,500 for the four disc brakes not including labor.  I expect Joe will be working on this for 4 to 8 hours tomorrow just to keep us on the road, so that’s more cost.

I don’t begrudge Joe his pay, he earns it and deserves it, and parts cost what they cost; it’s all part of owning a bus.  What I don’t like is having this happen on the road where ready solutions might not be at hand or we might be forced into a solution that is more costly than it should be.  But most of all I don’t like how it unexpectedly interrupts our winter and planned activities.  Perhaps that indicates that I do not have the necessary “roll with the punches” mindset for the converted bus lifestyle, although I think I have handled it reasonably well in the 6-1/2 years we have owned this bus.  Linda pointed out that our two prior winters were relatively trouble free but the fact is that we had issues with the bus both seasons.  At this point I do not have as much confidence in it as I want and need to have in order to fully enjoy it, but I will keep working towards that goal.

Linda went to bed at 10 PM and I continued to work on this draft blog post.  I found a PBS fundraiser concert on WUSF channel 16.1 featuring The Smothers Brothers, the Kingston Trio, and many other folk groups and musicians of the late 50’s and 60’s.  When it ended at 11 PM I switched to channel 16.4, which is the Create sub-channel, and watched an episode of GlobeTrekker before going off to what would probably be a less than completely restful sleep.

2016/03/19 (S) Braking News

I was up shortly after 7 AM, anticipating Joe’s arrival at 8 AM, and made coffee.  He texted at 7:30 that he would not be here until closer to 9.  That gave me time to enjoy my coffee and put the finishing touches on yesterday’s rather lengthy blog post.  When I tried to upload the Word file to our Dropbox I discovered that my iPad was not connected to any of our Wi-Fi networks.  It asked me for the password for each one I tried, even after restarting it twice, and when I finally entered them it would still not connect.  My computer was still online via its usual Wi-Fi connection, so I knew that our network was functioning.  I will probably have to shut everything down and restart it, but I wasn’t about to get into that this morning.

Linda got up at 8:30 still looking and feeling like death warmed over.  I poured her some coffee and then went out a few minutes later to remove the hub cap and lug nut covers.  I noticed that the sky to the north, northwest, and west was a solid mass of very dark clouds so Linda pulled up The Weather Channel radar on her iPad.  We knew that the probability of rain at our location today was forecast at 100% with the possibility of thunderstorms, but we were not happy about what we saw in the radar image.  There was a large band of rain stretching from north of us southwest into the Gulf of Mexico well south of our latitude.  The band included larger clusters with cores of strong rain indicated.  Linda put the summary in motion and the entire band was drifting due east with movement along the front from SW to NE.  There was no doubt that we would get rained on this morning, it was just a matter of when it would start, how intense it would be, and how long it would last.

At 8:50 I drive up to the trash dumpster and then drove to the clubhouse.  There was a car parked by the gatehouse so I walked over there.  The gate attendants were there so I gave them my name and site number as well as Joe’s name and explained why he was coming to visit us.  Joe arrived at 9:10 AM and a few minutes later drove right past our site.  I quickly phoned him and told him to turn around.  He did not have his “camper” (bumper-tow trailer) with him so he pulled onto the pad and drove to the very back to get his tools as close as possible to the rear of the bus where he would be working.  He had his dog, Gracie, with him.  Gracie is at least part Pit Bull Terrier with perhaps some boxer.  She has a dark brown, slightly brindled, coat and is a pretty dog.  More importantly, she is very sweet, very well-behaved, and very mindful of Joe, who has trained her well and gently.  As Joe got ready to work I grabbed my camera.

Joe got right to work on the driver side (LS) tag axle wheel and did not need any power tools.  He loosened the lug nuts using a 12x torque multiplier and a standard torque wrench.  The torque multiplier is a special tool designed just for this purpose.  It has an arm that fits over an adjacent lug nut to keep the tool from turning, thus forcing the torque to be applied to the target lug nut in the socket.  We also have one of these tools along with a 3′ long torque wrench, both of which I bought from Butch last year.

Once Joe had the lug nuts broken loose he had me start the bus engine and raise the tag axle.  As happened to the other day it did not lift the tires clear of the pad.  He had me switch the suspension to Level Low mode and raise the rear end so he could position his chassis stands under it.  He then had me lower the rear of the bus until it was resting on the stands.  Finally, he had me raise the tag axle and this time the tires lifted clear of the pad.

Joe checked to see if he could turn the tire.  He could, although he indicated that it had a lot more drag than it should.  I told him that had not been able to turn it at all yesterday.  He loosened and then removed all of the lug nuts and then removed the wheel/tire and rolled it behind the bus out of the way.  It’s a big thing; 42″ in diameter, 12″ wide, and 100 pounds.  Working on buses is not for sissies and weaklings, although as an owner the two most important and powerful tools needed are a cell phone and credit card.

Mobile mechanic Joe Cannarozzi removes the DS tag tire/wheel to get access to the brake.

With the tire/wheel out of the way Joe removed the dynamic wheel balancer and was finally able to access the disc brake assembly.  The assembly includes the caliper, the automatic slack adjuster, and the pneumatic brake actuator.  The entire assembly is mounted to a bracket (torque plate, or “spider”) that is part of the fixed portion of the axle via two large steel mounting pins that allow the caliper to move (slide) when actuated.  When facing the axle hub from the outside end the mounting points are at approximately 9 o’clock and 4 o’clock with the caliper and brake pads to the lower left towards the front of the vehicle.  (On the passenger side the caliper is to the lower right, again towards the front of the vehicle.)  The only other connection to the disc brake assembly is the air line that attaches to the brake canister.  The tag axle brakes are deactivated when the tag axle is raised so there was no air pressure in the line and Joe disconnected it.

The mounting pins are locked in by what Joe calls “wedges” which are metal pins with a partial circular notch machined out at roughly the midpoint.  The mounting pins have a slightly reduced diameter at their midpoint.  The notch in the locking pin engages the reduced diameter and locks the mounting pin in place.  The locking pin, in turn, is pulled up snug by a castle nut which is then secured by a cotter pin so that nothing can vibrate loose.  With the locking pins removed Joe was able to tap the mounting pins out and wiggle the assembly to get it loose from the rotor and then lower it to the ground.  Easier said than done; the disc brake assembly is very heavy, awkwardly shaped, and not balanced.

The first thing we both noticed was how the brake pads were worn.  The front and back faces of each pad were not parallel and the change in thickness was mirrored.  That is to say, the thinner end of one pad was opposed by the thicker edge of the other pad.  This suggested to us that the entire disc brake assembly was not square to the rotor and that over time the pads had become worn to match this misalignment.  That, in turn, suggested that the wear pattern on the pads could be forcing the caliper out of alignment on the slide pins and that this might finally have gotten to the point that that caliper got bound up on the slide pins and could not retract.

The fixed mounting holes have pressed in bushings so Joe inspected those and said they looked and felt OK.  We also inspected the mounting/slide pins and said they appeared to be alright.  I fetched all of the parts that I ordered from Prevost and opened the box with the new slide pins.  Joe compared the fit of the new pins and the old pins in the existing sleeve bearings and said that he could not detect any difference.  He had about a dozen replacement sleeves and checked the old and new pins in one of the new sleeves.  Again, he could not detect any difference.  The sleeve bearings are pressed in and pressed out.  Joe did not have the specialized tools needed to do this but also thought it was unnecessary work.

When Joe went to remove the larger inside brake pad he had a very difficult time getting it out.  Part of the pad holder is supposed to slide between two machined faces causing it to move straight in and out, but it was wedged tight.  Joe thought this was another possible reason why the brakes were dragging.  Once he got it out and removed the other (outer/fixed) pad he tried using a hand file to ease the fit.  I suggested that we try one of the new brake pads instead and he agreed.

The DS tag axle air disc brake caliper.

Before installing the new brake pads Joe used a wire brush to thoroughly clean the parts of the caliper that involved moving pieces and got a considerable amount of rust, brake dust, and general fine debris to come loose.  He also backed off the automatic slack adjuster and was of the opinion that the main actuator mechanism was moving freely and probably not what had cause the brakes to bind.  At that point Joe thought that disassembling the caliper and trying to rebuild it on site was a bad idea and I was inclined agreed.  The kit has a lot of parts and doing this outside in the rain did not seem like a good idea.  The new inner pad was a better fit than the old one so he installed it along with the new outer pad.  He then reconnected the air line to the brake canister.

Now came the moment of truth; could the disc brake assembly be reinstalled (at all), and if so, without causing excessive drag on the rotor discs.  As I mentioned before, the assembly is bulky and heavy, but the answer to the first part was ‘yes.’  The answer to the second part was ‘sort of’, but ‘sort of’ is a much better answer than ‘no.’  Joe was a able to turn the hub by hand but it was harder to turn than he wanted.  He decided to have me start the engine and slowly pump the brakes.  Each time I released them I paused while he turned the hub 1/8 to 1/4 turn.  What he was trying to do was get the new brake pads to seat and get the caliper to move straight in and out.  After several times around he was satisfied with the way the wheel felt as he turned it.  It still had a bit more drag than he wanted but he thought it would be OK.  Short of driving to a shop like American Frame & Axle in Tampa or Prevost in Jacksonville, this was the best we were going to do as a roadside repair.

A light drizzle had started around 10 AM at which point I put my camera away, got out my raincoat, and got out an umbrella which I held over Joe as best I could while he worked.  By the time Joe had the brake assembly reinstalled it was raining harder; not a downpour or thunderstorm, but a steady rain, and I had already put all of the new parts away in the front bay.  Joe reinstalled the dynamic wheel balancer and then got the tire/wheel back onto the mounting studs.  He put all of the lug nuts back on finger tight and then used the torque wrench to snug them up and pull the wheel flat against the hub.  He then had me lower the tag axle, which did not require me to start the engine, and tightened the lug nuts to 650 pound-feet using the 12x torque multiplier with the torque wrench set to 65 lb.-ft.  Why 65?  There is some loss in the gearing of the torque multiplier and Joe has found that treating it as a 10x device seems to be perfect.

Joe gave me a dollar amount for the service call and Linda wrote him a check.  I feel that he has always been fair with us and provided technically competent service with good value, so I have never argued with him about what he charged me or tried to negotiate a slightly better “deal.”  That kind of negotiating, over what amounts to pennies in the larger view, just indicates to someone that I don’t value their work or that I think they are trying to take advantage of me or even cheat me.  In the end all that does is create ill will, which is ultimately not in my best interest.  When Joe, or anyone else, works on our bus I want them to be glad to do the work and happy that we are their customer; there’s too much riding on it to have it any other way.

Joe got all of bus tools packed up and then we chatted for a while before he took off.  His timetable from this point on is a little loose but he thinks he is going to be in Williamston, Michigan, sometime in early April.  That’s only 30 miles from our house, so we discussed the possibility of him coming to our place at that time to at least service the other three disc brakes.  That would require us to get home, of course, but with the mild winter up north that might be possible.  We do not have any plans beyond our scheduled departure from Jetty Park on March 29th.

After Joe left I explained to Linda what he found, what he did, and why he thought the brake was fixed and would probably work properly now.  I then sent a short text message to Butch Williams, Chuck Spera, Pat Lintner, and Ed Roelle updating them on the status of the situation.  These are four of my five “go-to” bus guys, the fifth being Bill Gerrie from Ontario.

Pat called me right away.  He and Vickie we’re glad to hear that the problem was probably resolved and we would be arriving at Jetty Park on Monday as scheduled.  Linda had looked at the website for the home and garden show at Epcot Center and had me indicate to Pat that we would like to go assuming she is sufficiently recovered from her illness and we can find a nice weather day.

Not long after I got off the phone with Pat I got a call from Chuck.  Chuck’s interest in our brake situation is based on more than just the concern of one friend for another.  He and Barbara have an H3-40 VIP Liberty Conversion that is only one year newer than ours.  That means he likely has the same exact brake components as we do and is potentially facing the same failure/repair/maintenance issues as us.

While I was on the phone with Chuck Linda checked the Livingston County Road Commission website and found that the Spring Seasonal Size and Weight Restrictions had been lifted from all of the roads.  That meant we were clear to return home at any time.  We have had a good winter in Florida, and are looking forward to our week at Jetty Park, but we are not feeling the need to linger here to avoid freezing temperature back home.  Indeed, the last week here has been hot and if that continues we will definitely be ready to leave.

After the phone calls I made vegan cold cut sandwiches for lunch and got out our vitamins.  After lunch Linda went back to bed and I started working on the draft of this blog post.  Linda got back up around 3 PM.  By 5 PM I had finally captured the details of today’s events.  Linda spent part of the afternoon researching and purchasing Easter holiday gifts online for our children and grand-daughters.  She was out of tissues, so I drove to the Dollar Store in Webster to buy more.  When I got back I sat at the desk and edited another week’s worth of blog posts from mid-late December 2015.

As I was wrapping up my work to have dinner Adobe CC notified me that two updates were available.  That meant Lightroom and Photoshop, and we have them installed on both of our computers.  Our Verizon billing cycle was due to reset at midnight tonight and as of dinnertime we had used 10.927 GB out of 12.0.  This a bit of a game with us, and we like to use as much data as we can without exceeding our plan.

Around 6:30 PM Linda started fixing dinner in spite of still feeling pretty lousy.  She improvised an Udon noodle dish with broccoli, carrots, onions, and mushrooms and a citrus soy sauce which really gave it a spark.  She is taking OTC medications for her “cold” so she had water to drink while I had a glass of Arbor Mist Mango Moscato.  It’s growing on me.

I felt the need to get up and move around a bit after dinner while Linda felt the need to rest.  I took both of our iPads and my smartphone and walked up to the library in the FGMCR clubhouse to use the resort Wi-Fi to update them.  I had 10 app updates on my phone (estimated at 150 MB) and three on my iPad (200+ MB) while Linda had four on her iPad (200+ MB).  Rather than compete with myself I updated my phone first and then Linda’s iPad while I worked on this blog post on my iPad.  I then updated my iPad.  Even though we had 1/12 of our monthly data plan remaining at 7 PM these updates would have used over half of that.

When I was done updating our devices I walked back to our rig.  PBS out of Tampa / St. Petersburg was fundraising (again), this time featuring folk/rock/pop musical performances from yesteryear, so we left that on for background entertainment.  I uploaded one blog post from December 7, 2015 but was not in the humor to do more this evening.  I was monitoring our data usage closely and decided to update Adobe Lightroom on my computer.  It was 300 MB so I decided to defer the other three Adobe updates until tomorrow when I can take our computers to the resort library and do them there.

By this point Linda had long since gone to bed so I upgraded her laptop to ESET Smart Security 9 (SS9) which then required activation.  That was not the case on my computer and I had to go through a process of converting a username and password to a license activation key and then using that to activate the product.  While the upgrade was downloading and installing I installed the My Verizon Mobile app on my iPad.  I had to look up our account credentials but it would not let me log in.  It was getting close to midnight when our billing cycle would end and was telling me to “try again later.”  With that done I started following the procedure on ESET’s support website for updating drivers that Windows 10 is unable, or unwilling, to handle.

The ESET SS9 program was reporting that 16 or 17 driver updates were needed but I had to write them down on a sheet of paper.  These are manual, one-at-a-time, updates made by using the Device Manager to select a device, select “update driver,” and then select “search the computer and Internet for a more up-to-date version.”  If it finds one it installs it, which might then require a restart of the computer; a tedious and time consuming process for even one update.  I did 4 or 5 of these updates successfully but was too tired to do them all.  As it approached midnight we had used 11.6 of our 12.0 GB data plan and at the stroke of midnight the usage reset to zero (0).  Having successfully managed our meager 12 GB data plan (per monthly billing cycle) for the second month, squeezing out as much data as possible without incurring overage charges, I went to bed.

2016/03/20 (N) FGMCR Finale

Linda got up at 6 AM to take more medication and then went back to sleep on the sofa.  I was unaware of that at the time and found out when I got up at 7:45 AM.  I sat in one of the captain’s chairs with Juniper on my lap finishing yesterday’s blog post draft and then started today’s.  I finally got up at 9 and made coffee.

I worked most of the morning and early afternoon uploading blog posts from December 2015 to our website, taking time out for a few chores, and managed to upload the posts through December 20th.  I got a loaf of bread out of the freezer around 10 AM to let it thaw.  I made toast at noon for an easy meal.  With lots of nice puffy white clouds around, and a forecasted high temp of 79 degrees F, I put out the awnings on the driver (southeast-facing) side of the coach, turned off the residential air-conditioners, opened the windows and roof vents, and turned on the ceiling exhaust fans.  I grabbed my Tilley hat and walked the trash down to the dumpster.  I love my Tilley hat.

At 1:30 PM I powered down my computer and took it to the library at the resort clubhouse along with my iPad.  The music jam was taking place in the main room at 2 PM so I closed the connecting door.  That made the volume just about right and I enjoyed the background entertainment while I updated and blogged.  The musical genre was “country and gospel” (of course).  Not my kind of music, but the musicianship was high enough to be pleasant and the participants were obviously enjoying themselves.

When I first powered up my computer the disk drive light sputtered for a long time and the screen remained blank as though it was having trouble starting.  I powered it off, let it sit a minute, and then powered it back on.  This time the HDD light came on and stayed on, flickering slightly, which is what it normally does on startup.  It took a long time for the startup screen to appear, but it eventually did.  This behavior is, unfortunately, not unusual following updates, but the failure to start up could indicate a developing problem with the HDD.  I installed a number of updates last night, but had restarted the computer several times without difficulty.  Adobe Creative Cloud (CC) notified me that there was an update available for Photoshop CC (2015) but I already knew that; it was my main reason for going to the library to use the resort Wi-Fi connection to the Internet.

With Photoshop updated I turned my attention to updating device drivers.  As I described yesterday, this is a manual, one-at-time, process.  I got five drivers updated without needing to reboot the computer but the 6th one required a restart.  This time the start screen came up fairly quickly and I was able to connect to the resort Wi-Fi and log in without difficulty.  I then continued updating drivers.  There were two drivers for printers that we do not own, and a driver for the Intel WatchDog Timer (Intel WDT).  Try as I might, I could not locate the Intel WDT within the device manager and thus could not update it.

It’s possible the WDT is not enabled in the BIOS of my computer; from what I saw on the web not all manufacturers utilize it.  I restarted the computer to make sure things were fully installed and configured, and just to make sure it would (start up).  When the HDD light finally went out I checked for Windows 10 updates.  It reported that my device was up-to-date but ESET SS9 was still indicating an update to a driver I updated last night.  I updated it again and then restarted the machine once again.  I let it start up fully and then powered it down and went back to our coach.  I will go back later and update Linda’s computer.  I will also try to update our Rand-McNally RVND 7710 GPS navigation system, and perhaps our Garmin 465T GPS navigation system as well.  There’s a Wi-Fi Room at the west end of the clubhouse and I think I will try working there.

Back at our coach the bed was clear so I got out the computer cases.  I also needed the USB tether cables for the two GPS navigation systems.  I thought the cables were stored inside the sofa so we had to remove all of the cushions to get access to them.  As long as they were off, we rotated them.  The cables were not there so I looked in several other places before finally looking under the bed and finding one there.  Fortunately it fit both GPS units.  I packed up both of our computers, including the power supplies, my iPad, and put the two GPS units in my computer case.  I piled everything in the front seat of the car and drove back to the clubhouse, but this time I went to the Wi-Fi room.

The Wi-Fi room has four small desk tables set against the walls and a slightly larger round table in the center of the room.  Each desk table has a comfortable office type chair on casters and an outlet strip to supply AC power to portable devices.  I was the only person there and picked the desk table in the darkest corner to set up my equipment.  I got both computers plugged in to AC power and started them up.  There was a wireless access point visible in the room, so I connected to it instead of the SSID I normally use at the other end of the building.  I figured the stronger signal would provide a more reliable, and perhaps faster, connection.  I then connected the Rand-McNally TripMaker RVND 7710 GPS navigation unit to my computer with an appropriate USB cable and turned it on.  Once it connected with my laptop the Rand-McNally Dock software opened automatically and informed me that there was an OS/firmware update available for the device and also a map update.

I did the device update first and it took about 10 seconds.  I then started the map update.  At one point it told me the download would take 13 hours to complete, and that was after it had been downloading for an hour.  The R-M map update process is almost 4 GB of data and often does not complete successful.  When that happens everything is lost and you have to start over.  Basically, you can’t do the update on a limited/metered data plan, which is why I was sitting in the FGMCR Wi-Fi room trying to do it using the resort’s Internet connection.

With the map download under way I opened ESET SS9 on Linda’s computer to see what updates it thought were available.  I tried yet again to install the update for the Microsoft Visual C++ 2012 Redistributable, and once again it did if not seem to work correctly.  Windows 10 Update said it was available, said it downloaded it, and flashed the screen about six times that it was installing, before finally indicating that everything was up-to-date.  I tried to repeat what the ESET technician did on my machine by locating and repairing the update, but unlike my computer it did not appear in the list.  It really looks like I will have to get online with ESET again and gave them work some more of their remote magic.

Next I decided to update some of the indicated drivers on Linda’s computer.  I opened ESET SS9 again, went to available OS updates screen, and wrote them down.  I was able to update four of the 11 but could not find the other devices in Device Manager.  On my computer there was only one driver of any importance that I could not locate, but Samsung and ASUS obviously do not do things the same way.  What was surprising is that ESET SS9 is identifying updates for device drivers that do not appear to exist.  I restarted Linda’s machine to make are sure everything was OK and it appeared to be.

Two other people showed up (a couple) and were web-surfing and streaming some videos on separate devices.  All of which was fine; they had as much right to do that as I had to do what I was doing, perhaps more if they are owners, but I doubt that any of us were getting great data speed.  I started the update for Adobe Lightroom CC (2105) on Linda’s computer anyway, knowing that it was approximately 300 MB and would likely take a while.  Linda has lost her voice so I texted her the status of my work and suggested that she get out a folding chair and sit outside for a while in the lovely fresh spring air and sunshine.

Another couple came in to Skype with someone but decided to set up their tablet in the Billiards Room so as not to disturb the rest of us (or keep their conversation private, or both).  A short time later the first couple left and my map download, coincidentally, speeded up quite a bit.  I initiated the update of Adobe Photoshop CC (2015) on Linda’s computer and the map download on my machine, not coincidentally, slowed way down.

I had a brief chat with Butch Williams between 8 and 9 PM EDT.  He and Fonda were also preparing to move on tomorrow from their RV Park in Huahauca, Arizona. Their next waypoint was Deming, New Mexico but he did not know if they would make it in one day.  I was finally finished with my computer and GPS unit updates by 9 PM (except for our Garmin 465T) and returned to the coach.  Linda had held dinner, which I appreciated.  We did not have to be up at the crack of dawn so we stayed up a while and watched TV before turning in for the night

 

2016/03/12-14 (S-M) Middle of Nowhere Close to Everywhere

2016/03/12 (S) J.A.P.

The temperature had only dropped into the mid-60’s last night and it was foggy when we got up this morning, but we knew the humidity was up because we could feel the dampness.  Speaking of dampness, the sprinklers came on last night around 3 AM.  We must have both been partly awake as we both heard the sound, which was unusual enough to get our attention.  The cats heard it too and were at the driver side bedroom window to check it out.  It got my attention because it sounded like rain and we had all three roof vents open, along with most of the windows.  Anything that sounds like water will wake me up.

Webster Flea Market and Sumter Co, Florida Farmers Market.

There was a breakfast in the clubhouse at 8 AM this morning, with food being served at 9, but we did not go.  It was $5 per person, but that’s a lot to pay for coffee.  Speaking of which, I opened new packs of our four coffee beans this morning, transferred them to the metal storage containers, and then brewed a pot of Sweet Seattle Dreams.

We talked over coffee about what to do today while we doodled on our iPads.  Linda had a list of six things we could do in Clermont and noted that there was a Farmers’ Market in Webster from 8 AM to 3 PM today.  We also had updates pending for our iPads and smartphones so she checked our Verizon data usage.  We had used 8 of our 12 GB with eight days left in our billing cycle, so we were on track to stay within our data plan as long as we used the resort Wi-Fi system to do our updates.

Linda served homemade granola with fresh blueberries for breakfast.  After breakfast she went for her morning walk and I dealt with a few e-mails.  When she returned from her walk we drove to the Walmart in/near Bushnell for a few things.  We were going to stop at the Farmers Market in Webster on the way back but there was only one small vendor there.  A little farther north on CR-471 we passed the Sumter County Fairgrounds.  None of the rides were operating, so we did not know if the fair was open.  We were thinking about driving over this evening to see everything lit up at night.

Back at FGMCR Linda made very nice salads for lunch which included asparagus and Cremini mushroom pieces that she cooked briefly.  Very tasty. After lunch we packed up our technology and went to the library in the clubhouse to download/install updates.

We each had four phone app updates, four iPad app updates, and one Windows 10 update.  I also had an update for the NVIDIA GPU in my computer so that made a total of 19 updates.  That was actually a small number compared to the 60+ we installed the other day.  Even so, at an average file size of 30 MB that was over 500 MB of data, so I figured we were over 0.5 GB but probably under 1.0 GB.  After the updates were done we spent a little time trying to configure our Windows 10 Start Menus.  We were annoyed to find that the Start menu configuration tab is missing from the “Task Bar and Start Menu Properties” dialog screen on both of our computers.  Arrrrgh.  I did, however, get a couple of icons to show up where I wanted them and we learned how to “turn off” the “live tiles” in the metro interface.  We wrapped up around 2:45 PM and went back to our rig.

After getting our tech tools peered up and connected to our network I took a nap while Linda stayed up and read.  Jasper (the cat) curled up with me on the bed and took a cat nap.  I got up at 4:30 PM and joined Linda outside where another beautiful day was in progress with cool breezes and perfect temperatures (in the shade).

For dinner, Linda made a salad with an arugula base, vegan Italian sausage, sun-dried tomatoes, garbanzo beans, onions, and yellow peppers.  After dinner we went for our evening stroll around the resort.  When we got back to our coach we each had a small glass of Moscato (Barefoot) and fresh strawberries for dessert.

A mobile ATM machine at the famous Webster Flea Market. Webster, FL.

The title of today’s post is not an ethnic slur or reference, it’s just an acknowledgment of our status here at Florida Grande Motor Coach Resort (FGMCR); “Just Another Prevost.”  Unlike our minor celebrity status at Big Tree Carefree RV Resort in Arcadia, where we were T.O.P. (“The Only Prevost”), there are quite a few Prevost motorcoach conversions at FGMCR, and most of them are newer, bigger, and nicer than ours.  And that is fine with us.

TV stations continued to be a challenge.  I moved the antennas to position 16, which is approximately the 8 o’clock position relative to the nose of the bus, and rescanned.  The front TV found over 70 signals and the rear TV found 56.  As with previous experiments, however, many of the signals were unusable and others were for stations from other directions that we should not even have been detecting.

What we need to do is to move both antennas to each of their 16 positions, rescan, and then check to see which channels are usable and write them down.  Signal patterns can be different at night than during the day, so we should repeat this procedure in the evening.  That would be 64 separate scans, but in an area such as where we are now, with stations in multiple, opposing directions, it would be the only sure fire way to know what stations are available and where point the antennas to tune them in.

2016/03/13 (N) Saving Daylight

We were being lazier than usual this morning and did get up until 8 o’clock.  During the overnight hours the nation switched from ‘standard’ to ‘daylight’ (savings) time.  There are a few places, most notably the State of Arizona, that do not change their clocks, but for the rest of us it was an hour later when we got up this morning than our clocks indicated.  Unless, of course, they happened to adjust automatically, like our smartphones, iPads, computers, Linda’s FitBit, or our GPS navigation devices.  These devices adjust the time based on an internal program, Internet connection, or GPS signal.

As much as I wanted to reset the other clocks in the rig (we have six that do not adjust automatically) Linda insisted that I make the coffee first.  I enjoyed most of my first cup while finishing yesterday’s blog post and then reset the manual clocks.  We have an analog RV clock (with hour, minute, and second hands) in the living room, the clock in the microwave oven, a digital alarm click in the house systems panel by the refrigerator, and an identical one in the systems panel on my side of the bed.  The Magnum 4024 ME-ARC remote has a clock in it, and there is a small digital clock/thermometer stuck on the dashboard.  (Which reminds me that I would like to install a round, gauge-style clock in the dashboard someday.)

Linda made a tofu scramble for breakfast with onions, mushrooms, garlic, sun-dried tomatoes, asparagus pieces, and turmeric.  She does not make this dish very often but it always a treat when she does.

Linda went for a walk after breakfast while I checked our driver side tag axle hub.  I called our mobile mechanic, Joe Cannarozzi, this past Thursday to discuss the high temperature alarm we got on the bus’s driver side tag tire while driving to Florida Grande Motor Coach Resort (FGMCR) from Big Tree Carefree RV Resort (BTCRVR) on Monday.  He suggested I check the back side of the wheel for oil leaks and pull the hub cap off to check the oil level of the axle hub.  I checked the back of the wheel the other night after it got dark but did not see any oil residue.  Pulling the hub cap was a daytime job, so I finally did that today.  What I found was that the oil level was just below the bottom of the fill hole, so the hub was properly lubricated and almost certainly not leaking.

As long as I was at it, I removed the TireTracker temperature/pressure sensor and checked the pressure in the tire with my gauge.  It was 85.0 PSI, which was reasonable, given that it was sitting in the sun (with the tire cover on) and I had set it a week ago to 82.5 PSI while it was cooler and in the shade.  It’s possible that the battery is almost depleted or that the sensor has malfunctioned, but I doubt it.  Since it is easier and cheaper to replace the battery we bought a couple of CR1632 3V batteries at Walmart the other day.  I unscrewed the cover, slid the old battery out, slid the new one in, and replaced the cover.  I put the sensor back on the valve stem and turned on the receiver but it did not pick up the sensor right away.  I will have to check the manual to see if I have to re-associate the sensor with the receiver.  I put the tire cover back on, put my tool boxes away, closed up the bays, and went inside to upload posts to the blog.

This guy was actually making ice cream with this old John Deere contraption. Webster Flea Market. Webster, FL.

While I was working, Linda returned part way through her walk to let me know that Nick’s R.V. Detailing & Pressure Washing was in the resort cleaning someone’s rig.  We agreed that we should hire them and she continued her walk in that direction.  When she returned she said that Nick had us on his schedule for Friday, March 18.  He has a regular job on Mondays through Thursdays and only works on RVs on Fridays, Saturdays, and Sundays.  We got a business card from him yesterday so I sent him an e-mail confirming the date and giving him our site number and my cell phone number.

Rather than rearrange our shower we went to the clubhouse and used the shower facilities there.  A music jam session was scheduled to start at 2 PM but there was also rain in the forecast for that same time.  We did not want to close up the coach so we decided to pass on the music jam for this week.

Back at our coach we had some orange and grapefruit segments, a few nuts, and a few pretzels with hummus for a lunch snack.  I was checking RVillage and saw that Curtis had posted several items to the RVillage Ambassadors group.  I commented on a couple of them and then private messaged him.  He and the team are very busy so I try not to bother him, but as often happens my message prompted a phone call.  Strangely, my phone did not ring and went straight to voice mail.  Perhaps it was because I had the Wi-Fi turned on, but I’m not sure.  I called him back and put the call on speaker so Linda could also participate.  There are a lot of interesting and exciting things happening with RVillage and we had a nice, long chat.

I had a text message back from Joe with instructions on how to check the driver side tag wheel for a dragging brake.  The procedure was simple and easily carried out because the tag axle is:  a) free wheeling, and b) can be lifted clear of the ground.  That means that all I have to do is start the engine, lift the tag axle, spin the wheels, and compared the drag on the two sides.  If the driver side does not spin as freely it means the brakes are rubbing more than they should.  (The disc brake pads are always lightly in touch with the surface of the brake rotor which keeps detritus from getting between the rotor and the pads, preheats the pads/rotor for more effective breaking, and shortens the reaction time before braking takes place once it is requested.)

The possibility of rain started rising at 1 PM as the clouds thickened and darkened.  It spritzed occasionally throughout the afternoon and into the early evening but never really rained.  I managed to upload blog posts for November 18 through 22.

For dinner, Linda made brown rice and broccoli with Dijon mustard.  It was simple but slightly creamy, which gave it a subtle quality.  It was very yummy.  After dinner we went for a walk around the resort.  The weather continued overcast with dramatic clouds to the north but all we got was a few raindrops and the temperature was very pleasant if a bit humid.  I suggested that we sit outside and have a small glass of wine but Linda informed me that the only wine we had onboard was a bottle of ice wine that we brought along for a special occasion.  Ice wines are very sweet and usually served as a dessert wine.  Every day is special for us, but this did not seem like the occasion to open a bottle of ice wine.  We doodled on our iPads while we watched reruns of a couple of TV programs and then went to bed.  There was a small chance of scattered rain showers overnight, but we left the roof vents open and two of the exhaust fans running.

2016/03/14 (M) Webster Flea & Farmers Markets

Linda was up early this morning (6AM) and decided to go for a walk at 7.  I got up closer to 8 AM and got dressed.  I did not make coffee and we did not eat breakfast.  On Friday Linda was reading about the Webster Flea Market and Sumter County Farmers’ Market.  The Flea Market is the oldest and largest in Florida which, along with the Farmers Market, occupies a 40 acre site on the west side of CR-471 in downtown Webster.  The website said it was one of the “top 10 attractions” in Florida.  They are only open on Mondays and they draw a large number of vendors and a very large number of shoppers.  Florida Grande Motor Coach Resort (FGMCR) is only a few miles from downtown Webster, and today was the only Monday we would be in the area, so of course we went to check out.

When we arrived at the market site around 8:30 AM there were already a lot of cars and people there.  We drove past numerous places selling parking space but we were able to find free parking on the flea market grounds not far from where the food vendors were set up at the Sumter County Farmers Market.  I strapped on my camera harness and Linda carried the small camera bag as we ventured forth into the crowd.

The sites on our side of the street looking south from our site at Florida Grande Motor Coach Resort near Webster, FL.

We walked through the Farmers Market area first so Linda could get a sense of what was there.  The markets open at 5 AM and close at 3 PM so we were surprised that a lot of vendors were just setting up as we walked through.  I took a few pictures, but really interesting photos were few and far between.  We wandered through the grounds trying to get a sense of the layout of the place, the stuff for sale, and the people selling/buying it.  The Farmers Market was in the northeast corner.  Just south of that was a fenced area with vendors under long, open-sided pavilions.  Just south of that were long concrete block buildings with stalls secured by overhead garage doors.  A sign indicated that this was the area with stores selling antiques, and that there were 66 stalls.

To the west of all of this was the West Webster Market area on the other side of a fence with open gates.  This area had a few open-sided pavilions but it was mostly “trunk sales”, at least that’s what we call it at ham radio swap meets.  Vendors had a designated area in which to park their vehicle and sell their stuff, some of which was still in the trunk of a car or side door of a van.  Some was displayed on tables that the vendors brought, and some was laid out on the ground.  Throughout the venue there were lots of food vendors and occasional live music performers.

We are not flea market people and we did not see anything that we had to have.  We found a piece of Pyrex that we thought Meghan would like and Linda sent her a picture.  It was a 1959 Golden Branch Promotional Hospitality Round Casserole.  We did not hear back right away and decided to go ahead and buy it for $20.  We found out later that she thought it was worth $5.  That is just one of the many reasons we do not shop at flea markets.

We returned to the Farmers Market where Linda bought 1/2 flat of strawberries for $5 along with kale, Swiss chard, green beans, onions, mushrooms, and scallions, all for very good prices.  We like farmers markets.  We remembered how bad the traffic heading south out of Webster was last Monday at 2 PM as we were coming north so we returned to the car and left the grounds a little before noon.

We took one of the streets through town to have a look at the place.  Webster is a small, impoverished town where people appear to live with little or no self-respect or consideration for their neighbors.  It is one of the saddest looking places we have ever seen.  FGMCR is not actually in the city limits of Webster but has a Webster mailing address.  It is far enough away from the actual town, and surrounded by cattle fields, to be a quiet, peaceful place isolated from the poverty of Webster.  What makes it an acceptable location for an RV resort is that it is only 10 miles from the Walmart at I-75 in Bushnell, 17 miles to the Publix supermarket in Groveland, 23 miles to Clermont (lots of shopping and a few attractions), 25 miles to The Villages (lots of shopping, restaurants, and medical services), and 50 miles to Brooksville, Ocala, and Orlando.  A 90 to 100 mile radius takes in everyplace from Arcadia to Tampa St. Petersburg, up the “Sun Coast” through Weeki Wachi, Homosassa, and Crystal River, and then inland to Gainesville (including Williston) and over to Daytona, Cape Canaveral, and on down the Atlantic coast.  FGMCR’s motto is “…in the middle of nowhere, but close to everywhere” and it is a fitting one.

The forecast for the rest of the week is for daily high temperatures in the mid-to-upper 80’s with party cloudy skies and some humidity.  A good breeze was blowing from the south today but we judged it to be mild enough that we could deploy our awnings.  Linda closed all of the windows and I closed the roof vents and turned on the air-conditioners.  Linda got the three silver bubble wrap insulating panels out from under the bed and I installed them in the skylights.

Linda prepared some oranges and strawberries for lunch after which she settled in to work on taxes while I worked on this post.  The wind intensified, and less than hour after we put out the awnings we put them back in.  I spent the rest of the afternoon uploading the posts for November 23 through 30 (2015) to our blog.  That meant I was caught up to the point in time when we left Michigan and arrived in Florida for the winter and was now only 3-1/2 months behind on uploading my posts.

Linda took a short nap from 4:45 to 5 PM, and then started preparing dinner.  She made a nice collard greens salad with homemade croutons, homemade vegan “Parmesan” cheese, and a homemade lemon-juice dressing.  It was crisp, light, delicious, and ample along with a side of sautéed green beans and carrot rounds.  A glass of white wine would have been a nice accompaniment, but we still do not have any on board.

We ate dinner a little earlier than normal and, with the change to daylight savings time, there was still a couple of hours of daylight left before subset.  Large, puffy clouds, in shades from bright white to dark gray, dominated the sky and the low angle, early evening sunlight was brilliant, dramatic, and colorful.  We went for a walk around the resort and I took the camera along.  I paused often to capture images and we stopped occasionally to chat briefly with folks.  We were almost back to our coach when we stopped to talk to Dennis.

Dennis and his wife are part of the group of 59 property owners who have a free and clear title to their lot.  He knew quite a bit about the history, current status, and future development of the resort.  We had heard bits and pieces, so he filled in a few details and clarified a few others.

The hedges that separate and define the lots were all planted as part of the original development, as were the flower beds.  Each site has palm trees and they are planted in the very the same locations on each site except at corners and curves in the road where adjustments had to be made.  Owners have personalized their choice of flowers over time but the locations of the beds are tightly regulated by the deed restrictions and controlled by the POA architectural review board.

The villas are all identical on the outside and have to stay that way.  They are constructed in a large building at the back of the property, trucked to the site on a flatbed trailer, and set in place on their pad with a crane.  Once they are strapped down (hurricane code) and the utilities are connected the owners can finish the interiors however they want.

Linda sitting in the corner of the library in the clubhouse at Florida Grande Motor Coach Resort near Webster, FL.

Only recently have owners been allowed to add a pergola at the rear of their villa to shade the portion of the parking pad that wraps around behind the building.  The addition of the low stone border walls around the hedges and planting beds is also a recent change.  Each layout is unique but must use the same exact stones and the layout must be submitted to the POA architectural committee for approval.  Personally, I like the uniformity of materials but appreciate the uniqueness of each design.  There are only nine pergolas at this point (according to Dennis) and I estimate no more three dozen sites with stone walls (out of 249 sites) but they look very nice and the resort will look more and more “finished” and interesting as more owners add these personal touches.

As for future development, Dennis said that all of the problems from the past have been taken care of and the current developer (Mr. Smith) has told property owners that he has brought the park out of bankruptcy.  The reason that the “group of 99” property owners are going to have to pay $22K (each) to get their free/clear deeds is that they had liens on their lots when the project went into bankruptcy and Mr. Smith had to buy the liens as part of resolving the bankruptcy.  He has also told the current owners that he expects fully developing the resort to take 10 more years and that he plans to finish Phase 2 in sections rather than all at once.  Dennis seemed to think that was prudent and that Mr. Smith was both an honest and competent businessman.

The water and sewage systems are part of the 400 acre resort property and are sized to handle the eventual 499 sites.  Most of the infrastructure is in place for Phase 2 but not the sewage lift pumps or paved roads.  He will have the road paved, and the pumps installed and made operational, as he opens each section.  The water system is also sized to handle the irrigation and fire suppression needs of the park.  Every site has in-ground sprinklers that are activated on a rotating basis over the course of a week.  Indeed, all of the grounds maintenance is handled by the resort as part of the currently very modest $500/quarter POA fee, including grass mowing and hedge trimming.  The infrastructure here is very impressive.

Dennis was of the opinion that the risks of investing in this park, going forward, were minimal.  He also clarified that Mr. Smith’s stated plan is to commence with work on Phase 2 when 90% of the lots in Phase 1 are sold and that the resort is close to that point now.  He wasn’t trying to sell us anything, but thought that a few bargains remained if someone wanted to buy out one of the 99 properties, many of which have been for sale.  That group of (would be) owners apparently got hurt financially.  He also told us the same thing we have heard from others, that they like the quiet and solitude that comes with the resort’s relatively isolated location but access to a great deal within a one hour drive, and access to almost everything within a two hour driving radius.  (What he did not say, and no one else has either, is that this would not be a good location in which to have a serious medical emergency.)

Back at our rig we turned off the air-conditioners, opened up the coach, and settled in to watch our Monday evening TV programs on CBS.  I off-loaded the photos I took today to my computer and backed them up to the NAS.  Linda headed off to bed at 11 PM.  I stayed up to watch the news and weather and caught part of The Late Show with Stephen Colbert before turning in.

 

2015/12/02 (W) Settling In

I was up at 7 AM, fed the cats, and settled in on the sofa with the heater pad on my lower right back to work on my iPad.  I finished my blog post for yesterday and e-mailed the last three days to myself.  I updated seven apps and then checked out the latest issue of the SKP Photographers BoF newsletter.  Linda finally got up at 9:15 AM.  I made a pot of coffee and we had toast for breakfast.

My first priority after breakfast was responding to a half-dozen e-mails from Gary at BCM, one of which required me to proofread an article he had written about a recent rally.  Next I selected four photos I took with our new Sony a99v DSLT camera and uploaded them to a Dropbox folder for Lou to see.  Somewhere in there I got a call from Joe (our mobile mechanic) about Globus cork flooring products.  As long as he was on the line I asked his opinion about the chassis battery / Vanner equalizer issue.  He reminded me, as he often does, that I already knew how to check if the Vanners were working.  When we concluded the call I went outside and did the checks.

With the Vanners connected to the batteries and working correctly the voltage at the “12V” terminal should be exactly 1/2 the voltage at the “24V” terminal.  Equivalently, the voltage from +24 to +12 should be the same as the voltage from +12 to Ground.  I unplugged the two maintenance chargers to let the surface charge bleed off and used the time to trace the wiring behind the two battery disconnect switches.  As I somewhat expected the two Vanner equalizers, which are wired in parallel, are NOT connected to the batteries when they are disconnected from the coach electrical panels.  (The one Vanner whose label I could see is a Voltmaster 60-50M rated at 50 Amps maximum so I presume the other one is the same model.)

With the battery bank connected the relative voltage measurements were as expected, indicating that the Vanners were probably working correctly while the absolute measurements of +25.6 and +12.8 (to the nearest 0.1 VDC) indicated that the batteries were fully charged.

I put the disconnect switches back in the disconnected position and plugged the maintenance chargers back in.  I checked the voltage on the upper and lower battery strands and they were close to the same but not identical.  That was reasonable given that the chargers were independent (electrically isolated) and the upper and lower strands were bridged by Vanner equalizers just minutes before.  Based on my testing it appeared that everything was OK except that I lacked a plausible explanation for why the engine alternator apparently did not fully charge the batteries yesterday on the drive down from Mayo.  I wrote all this up in an e-mail and sent it to Joe, Butch, and Chuck, all of whom have had conversations with me about this over the last few days.

Linda made a humus and onion on rye sandwich and we split it for lunch along with some grapes.  It rained hard while we were eating but the rain did not last long.  After lunch I completed the certification paperwork for our FMCA Freethinkers Associate Chapter.  It was 4:15 PM by the time I was done.  I will get copies made tomorrow and get it in the mail to the headquarters in Cincinnati, Ohio.

I logged in to the Prevost Community website to renew our AITA NAPA discount card but wasn’t sure what to do, so I called Chuck.  He and Barbara were at a wine and cheese gathering and he said he would call me back when he was free.  Linda wanted to go for a walk around the Resort so at 4:30 we headed towards the north end.  This part of the Resort has had a lot of development since we were last here and now has a lot of new park models and large pads for RVs.

We looped around to John and Ali’s 5th wheel but did not see any sign of them so we headed down the main road towards Jeff and Kathy’s site.  Sure enough, John and Ali were there enjoying a glass of wine with Jeff and Kathy.  They offered us some and we accepted and pulled up a couple of open chairs.  We sat and visited until 6:30 PM when we started to get some persistent rain drops.  John drove us back to our coach in his golf cart.

For dinner Linda made a nice green salad and pan-seared tofu with a balsamic vinegar, soy sauce, and sugar glaze with chives.  It was very good and I could easily have eaten twice as much.  After dinner I worked on an article about replacing the bearings in our Aqua-Hot Webasto burner this past winter while we were on Quartzsite.  I got the text finished and inserted/captioned the photos that had been post-processed.  There are more photos to be processed and I plan to finish the article tomorrow and upload it to the Dropbox for proofreading.

I need, and have been looking forward to, a stretch of quiet days with time to work at my computer as I have a lot to do.  I need to update our website and blog, which is almost four months behind, and get back to work on the SLAARC, FMCA Freethinkers, and FMCA GLCC websites.  I also need to finish some articles for BCM that have been “in process” for quite a while, and I need/want to write some new ones.  Along the same lines I need to clean up my BCM folders on my hard drive and in our Dropbox.  That is not all going to happen by the time we leave for Arcadia, but I will do as much as I can.  Once we get to Arcadia we will be spending more time away from the coach exploring southern Florida and visiting with friends.  That means I will be creating lots of new photos and posts but have less time to process them.  Ahhhh, retirement.

 

2015/11/02 (M) Driveway Joe

Linda was up at 5:45 AM and off to the bakery at 6:15.  I got up at 6:45 AM, got dressed, and went to the bus to turn on the block heater and Aqua-Hot engine pre-heat loop.  I then made coffee and had breakfast, after which I e-mailed Mike (W8XH) to let him know Joe would be here all day today.  I then reset the clocks in the two digital cameras.

Joe was at Chuck’s a little before 7 AM to change the engine oil and filter and figured it would take one hour.  I started the main engine in our bus at 7:45 AM to warm up the oil and make it easier to drain.  I let it run for 20 minutes on high idle, dropped it to low idle for a minute and shut it down.  The block will hold heat for quite a while.

Chuck texted me at 8:15 AM to let me know that Joe was on his way to our place and Joe called about five minutes later.  He was on our street but called because he wasn’t sure he was in the right place.  He pulled in to our first driveway entrance just before 9 and pulled his van up behind the bus.

I had dumped the air in the suspension yesterday when I put the coach up on stands so Joe had me start the engine and air up the suspension as a safety backup should one of the stands fail.  I raised it up off of all four stands and then set it back down but quit dumping the air as soon as it was on each stand.

The work for today was routine annual chassis and engine maintenance.  Joe needed to have diesel fuel on hand so I drove to the Shell station and bought four gallons.  While I was there I picked up a large coffee for him at the co-located Dunkin Donuts.

When I got back from my errand run Joe was already lubricating everything on the chassis and engine that had a grease fitting using the Mobil 1 synthetic grease I bought yesterday.  He was starting to generate messy trash so I fetched a large plastic trash bag.  He drained the engine oil, removed the old filter, filled the new filter with oil, and spun it on.  He then added six gallons of Chevron Delo 100 SAE 40 Heavy Duty Engine Oil that I bought on Saturday.  I added 2 to 3 more quarts from the reservoir to use up the oil that had been in there for a while.  I then refilled the reservoir as it is very handy for topping up the oil.

Joe removed and replaced both coolant filters while I fetched a bottle of Detroit Diesel PowerCool engine coolant.  He added coolant to the expansion reservoir while I watched the sight glass on the side of the tank and told him when to stop.  He then had me help him with the secondary fuel filter, which we pre-filled with diesel fuel.  Last, but not least, we replaced the filter element in the Racor fuel filter / water separator.  Joe installed the new filter element and gaskets and topped off the fuel in the housing before putting the cover back on.

I started the main engine and let it run for 30 seconds to circulate the oil, coolant, and fuel.  Joe added a little bit more oil to bring the level up to just over half way between the L and H marks on the dipstick.  This is where the engine likes to run and if I fill it to the H mark it will get rid of the extra oil on its own.

With the maintenance on the bus completed we transferred all of the old oil from the drain pan into the one gallon plastic jugs that had contained the new oil and put them back in the 3-jug cardboard boxes for convenient transport.  Our local O’Reilly’s Auto Parts store accepts waste oil and filters so I will take them there for disposal.  Although I had my own bus work to do I hung with Joe until he was done.  I stayed near the bus and trimmed trees when he did not me to assist with things.

Joe offered to come back next year to do our annual service and suggested that we take an extra day to replace as many grease fittings as possible either with better fittings or with small lines running back to one or more conveniently located manifolds.  The manifolds would have an input for grease and a valve for each line allowing most of the chassis and engine to be greased without getting under the bus.  I must say that I liked the sound of that.  It would be a nice upgrade to the bus and would make a good article for Bus Conversion Magazine.

I did NOT have Joe remove driver side front tire so I could get the splash guard off and inspect the area under the tray behind the driver’s seat.  I will have to deal with that on my own.  I also noticed that the fuel tank was down to 3/8ths so I will have to take the bus out and refuel it at some point and may have to turn off the Aqua-Hot and use the electric toe-kick heaters instead until I can refuel.

Keith called at 1 PM to let me know he would not make it out to mow the grass today.  He will be here tomorrow morning, probably for the last time this season.  Joe was packed up and on his way at 1:45 PM.  He was headed to Chicago where he has a house but has not been there in the last 18 months.

After Joe was done I went to Painter’s Supply and Equipment in Howell to buy POR-15 and the POR cleaner/degreaser.  POR is a brand but stands for “Paint Over Rust.”  It reacts chemically with rusted metal to stabilize the metal and prevent further rust.  I bought a can of spray on rubber material to put over it.  The POR-15 was pricey at $33 for a pint, but it is serious stuff and is used by the U. S. Navy.

My next stop was Lowe’s for a foam brush.  I picked up a 4-foot length of angle, four U-bolts, two pulleys, some miscellaneous nuts and bolts, and a 100 foot length of 3/8″ polypropylene rope, all of which was in preparation for ham radio projects tomorrow on the small tower.  After Lowe’s I stopped across the street at O’Reilly’s Auto Parts store to dispose of the oil and filters.  Their parking lot was being seal-coated and I could not get to the disposal bins so I will have to try again tomorrow.

By the time I got home it was 4:30 PM.  Rather than start working on the bus I did a little more trimming on the trees by the road in front of the house and then put the yard tools away.

For dinner Linda made a whole wheat linguini with mushrooms, onions, and sun-dried tomatoes lightly sautéed in EVOO.  We opened the bottle of Frey Natural Red organic/vegan wine.  It was very dry which made it difficult for me judge its other qualities as I do not care for dry wines or wines with noticeable tannins.  Still, it went well with the dish and I finished my glass.  I don’t think I will ever develop a taste, however, for dry wines and/or wines with a lot of tannins.

After dinner I worked on an article for Bus Conversion Magazine (BCM) about our experience on the Habitat for Humanity build we participated in back in July 2013.  The article has been done for a while but the publisher (Gary) had someone (Teresa) proofread it a couple of days ago and she found some minor things that I needed to correct.  Gary and I are also discussing whether to split the article into two parts and/or cut down a bit on the number of photos, which currently number about 60.  I took a break from 8 to 11 PM to watch television with Linda and then returned to working on the article before going to bed.

 

2015/11/01 (N) Brunch with Kathi, Farewell to Uncle Bob

We switched from Eastern Daylight Time back to Eastern Standard Time overnight.  It was 11:30 PM when I turned off the lights and 7:30 AM when I got up, and since I had not reset my nightstand clock I got my eight hours of beauty rest.  I put my robe on and started setting all of the clocks back one hour.  We have a LOT of clocks.

My cell phone adjusts automatically, as do the computers and satellite linked thermometers.  I reset the clocks in the microwave, range, and coffee maker, and stopped the grandfather clock, which is only supposed to be advanced, to let the time catch up to the setting.  I reset the clock on our phone system, the clock on my night stand, and on two of our thermostats.  The Wi-Fi thermostat already had the correct time so it may have adjusted automatically or perhaps was never changed to EDT last spring.  We have three battery powered clocks that I did not reset as I wanted to change the batteries and the incorrect time would serve as a reminder that I had not yet done that.  I still need to check the clocks in the two digital cameras, as I like to have correct time stamps on my photos, and there are five clocks in the motorcoach that need to be reset.  We have a lot of clocks, but I quit wearing a wrist watch when I retired.  I always have my phone with me anyway, and it usually knows what time it is in whatever time zone I happen to be in.

While I was in the basement I checked e-mail, replied to one from Gary at BCM, and then cleaned the cats’ litter tray.  Linda was up by then so I made coffee.  I turned on the fireplace and we settled in the living room to read, write, and savor our morning brew.

Kathi Slater, a long-time friend who Linda hired on at the bakery some years ago, came to our house today for brunch.  I think it was only her second visit since we moved to this house but then most of our friends have been here at most once, if at all.  Family members visit more often, of course, but that does not mean frequently.  John/Dianne Rauch and Steve/Karen Limkemann have been here the most, along with Mike Sharpe (W8XH) from our SLAARC ham radio group.  Philip Jarrell of Precision Grading, and Keith Kish of Kish Lawn Care, have been the most frequent people here on business, along with Kerry Fear, who does our snow plowing, and Darryl Mech of DMC Heating and Cooling, who did a lot of work for us when we converted from propane to natural gas.  We do not, however, feel isolated here.  We are getting to know a few of our neighbors and we are only minutes away from three communities full of people and shopping options.  Both of our children and their families are only 30 to 45 minutes away as are the northwest suburbs of Detroit where some of our friends still live.  But most days we live quiet, undisturbed lives at our home in the country, and we like it that way.

Linda and Kathi had “things” to discuss that did not involve or concern me, so after brunch I busied myself with other things.  After checking e-mail I started downloading an update to Adobe Photoshop CC (2015).  These downloads are huge and very slow so I left it to run.  Chuck texted me and arranged to pick up his eight gallons of oil around noon.  We chatted briefly when he arrived and he took a second look at our water intrusion problem.  After he left I went to the O’Reilly’s Auto Parts store in Howell to buy grease.  Joe told me to get two tubes of the best stuff I could find, synthetic if possible.  O’Reilly’s had Mobil 1 synthetic grease for almost twice the price of anything else on the shelf so I bought three tubes and used my $5 off reward card.  Lowe’s was right across the street so I popped in there and got three boxes of Scott blue paper shop towels.  I use a lot of these when working on the bus.

When I got home I changed into my work clothes and got to work on the bus.  I stayed on that task the rest of the afternoon except for a few short breaks.  The first break was for linner.  The second break was to start the bus engine, raise the body, put the stands under it, set the body on the stands, and dump the air from the suspension.  The third break was to say “goodbye” to Kathi and the forth break was for another brief visit from Chuck to pick up a bus engine oil filter from me.

In the course of the afternoon I managed to cut out most the rotten water-damaged wood from the floor in the driver’s area of the bus cockpit.  Cleaning up the metal and protecting it, providing a drain for the water, and then patching in the floor is going to take several days.  Finding and plugging the entry point may not happen.  It’s November 1st and I only have about three (3) weeks to get the bus put back together to the point where we can use it this winter.  The reservations are made, winter is coming, and we are out of here before the calendar turns to December.

When I wrapped up work in the bus around 5:30 PM I had been using a two-tube fluorescent work light for an hour.  By the time I set the thermostats back, and changed the time on the microwave and the battery powered clock in the living room, it was approaching 6 PM and it was dark outside.

Linda made broccoli soup from scratch for dinner.  It was a mild, subtle dish and we both had seconds along with a few crackers and strawberry preserves.  I called Butch after dinner to update him on the floor situation in the bus and get his opinion on my idea of filling the “tray” with expanding foam.  After talking it through I decided it might be the best idea I ever had.

While I was talking to Butch I got a call from Joe and handed the house phone off to Linda.  Joe was northbound on I-275 in Michigan.  He was at most an hour from our house but getting ready to stop for the night.  He wanted to be close enough to Chuck’s house to get there easily by 7 AM and did not want to backtrack the 20 miles from our place.  As we say in ham radio “QSL” (I understand).

I got the phone back from Linda and was continuing my conversation with Butch when I got a call from a 405 area code number that showed up as “unavailable.”  I don’t usually answer those calls but they left a message and called back about 12 minutes later.  I had not even checked the message yet but figured it was someone actually trying to reach me so I gave the house phone back to Linda and took the call.  It was my nephew (by marriage), Philip Pelton, calling to let me know that my Uncle Bob had passed away a couple of hours earlier.  He was also looking for a phone number for my dad.

Bob was my dad’s younger brother by two years, his only sibling and my only Uncle, my mother having been an only child.  Bob was 88.  Linda and I saw him in April on our way home from our winter in the desert southwest.  Bob had Parkinson’s disease and was in a rehab center near his home fighting an infection.  He did not look at all well to us at the time so I was not really surprised by Philip’s call.  According to Philip, Bob had developed pneumonia in both lungs shortly after we were there and the doctors were never able to cure it.  He was at home when his blood oxygen dropped, he lapsed into unconsciousness, and expired.

Uncle Bob was an interesting and unusual guy.  He had a Ph.D. in micropaleontology and was a brilliant geologist.  Born and raised in St. Louis, Missouri, he moved to Oklahoma and spent his entire career studying the geology of that state.  He developed an interest in genealogy somewhere along the way, and did some significant research on the various branches of our family.  He married Helen Pelton, second marriages for both, but never had children of his own.  Helen had one son, Scott, who passed away some years ago, survived by his mother, ex-wife Linda, two children, Tiffany and Philip, Tiffany’s three daughters, and Philip’s son and daughter.  He was known to all of them as Papa (PawPaw) and they obviously adored each other.  We only had a few visits with him over the years but they were always very interesting.

We wrapped up the call with Butch and I called my sister.  Philip had already reached her but we had a long chat.  She reported that our father is doing better and has recovered somewhat from his stroke of a couple of months ago.  My grand-niece, Lilly, is having short seizures again, which is concerning to say the least.  The doctor has adjusted her medication but it will take a week to see if the higher dose is effective or they need to move to a different drug.  Lilly is six weeks younger than Madeline and just the sweetest little girl you can imagine.  It is most unfair to her, and her parents, to have to deal with these seizures.

I went to my office and downloaded e-mails (which were painfully slow).  I had two in our general contact account, which I do not check every day.  They were both from BCM readers letting me know that they enjoyed my articles and actually found them useful.  I replied to both and answered their questions as best I could.  I then logged into RVillage.  We had one message, which I responded to, and 153 notifications.  The vast majority were from the Comic Relief group and I think I will have to turn off notifications for that, and perhaps other, groups.  In retrospect I should have created a separate e-mail account for RVillage, but I didn’t.

 

2015/10/31 (S) Boo!

We overslept a bit this morning and did not get up until 7:20 AM.  We dressed quickly and drove to breakfast separately as we had to go to separate places afterwards.  We got there at 8 AM and had a nice chat with the folks at our end of the table.  It was a big group this week, at least 24 people, maybe more.

Linda left breakfast at 9:15 AM to meet Diane at Kensington Metropark at 9:30 and go walking.  I lingered at the restaurant until after 9:30.  I drove back to I-96 and Grand River Avenue in Brighton, where I filled my fuel tank at the Shell station, and had a nice QSO with Mike (W8XH) while driving.  I then drove across the street to Brighton Ford to pick up the four spin-on coolant filter/conditioners I ordered yesterday.

Brighton Ford’s parts department is a NAPA outlet but they do not have any signs to that effect as Ford Motor Company won’t allow it.  My next stop was up Grand River Avenue towards Howell at the O’Reilly’s Auto Parts store where I picked up the nine (9) gallons of Chevron Delo 100 SAE 40 engine oil I ordered yesterday morning.  I drove home and chatted a bit more with Mike on the way.  I found out that he gets his Lawn tractor serviced at/by Sloan’s in Linden and is very pleased with them.  He has a trailer for transporting his lawn tractor and is willing to let me borrow it to transport ours when I am ready.

When I got home I unloaded the oil and filters and then emptied the dishwasher, refilled it, and started it.  I then went to my office to work.  I had an e-mail reply from Byron Pigg with information I needed to finish the article for Bus Conversion Magazine (BCM) about his 1985 Model 15 Eagle bus conversion.  I incorporated the new info into the Word docx and then called Byron on the phone.  We spent at least an hour going over the article and chatting about bus conversions.  After we wrapped up our conversation I worked a bit longer on the article making the last few edits and removing blemishes from two of photos.  I uploaded the article (Word docs) and all of the photo files (jpgs) to my BCM Dropbox folder at 2:15 PM and then e-mailed Gary (publisher), Mike (editor), and Jorge (layout).

Shawna gets Madeline into her Bumblebee costume for Halloween Trick-or-Treat in their neighborhood.

Shawna (back to camera) gets Madeline into her Bumblebee costume for Halloween Trick-or-Treat in their neighborhood.

While I was doing all of that Linda firmed up our Halloween plans with our son.  We left the house at 2:45 PM and drove to Ann Arbor, arriving at their house around 3:30.  Shawna got Madeline into her bumblebee costume and Linda gave her a Halloween gift bag with a rag doll, some candy, and a card.  At 4:15 we walked over to a neighbor’s house for a gathering that included snacks/dinner.  We talked to host Laurel’s parents, Tom and Kendra, who were there from San Diego, California.  All of the kids and most of the adults left at 5:15 to go door-to-door trick-or-treating on Granger Street.  Granger was closed off to vehicles for several blocks with policeman at each barricade and there were hundreds of people out and about.  Many of the adults were in costume, some quite elaborate, and it was quite a sight.

Madeline caught on very quickly to her role in all of this and would often walk past other, larger children right to the front of the line to get her treat.  She is just shy of three years old so it was cute.  One of the houses had two large pumpkins out front, appropriately carved.  They were real pumpkins and each weighed about 1,500 pounds when they were delivered by a truck.  Madeline is above average height for her age but these pumpkins towered over her.  The homeowners are well known in the neighborhood for having these giant pumpkins each year and bring in mind-boggling large quantities of candy in crates.  You gotta love neighbors like that.

The rain held off for most of the prime trick-or-treat window from 5 – 6 PM but I was cold and went back to the house a little ahead of everyone else.  It started to drizzle around the same time Madeline’s endurance was waning and they got back to the house at 6:30 with the umbrella deployed.  Madeline was eager to take stock of her Halloween “loot”.  We enjoyed watching her excitement at having different items to choose from and then “negotiating” with her parents over having to select just one item for this evening.  Halloween trick-or-treat is perhaps best appreciated while watching a three year old experience it.

We left around 7 PM and stopped at the nearby Whole Foods Market for soy creamer.  We picked up two bottles of Frey brand wine, a white and a red, and two pieces of vegan cake.  Frey makes organic wines without the use of animal products and are a sponsor of “Cooking School” with Christina Perillo on the PBS Create channel.

I got a call from Joe as we were getting ready to leave Whole Foods.  He was packed and ready to hit the road first thing in the morning.  He wasn’t sure if he would make it all the way to our house on Sunday or finish the trip early Monday morning.

It rained on the drive home and I took the wheel as Linda has a hard time with dark/wet roads.  We were reminded, once again, of the poor condition of Michigan’s roads, many of which need to be repainted and have reflectors installed such as the ones we saw in Florida the winter before last.  (I suspect that the reason Michigan does not use them is because of snow plows, but they really make it safer to drive dark roads at night.)  We got home sometime after 8 PM and had dessert.  I checked the bus for leaks buy did not find any new water.  I texted Joe our address, checked e-mail, and then opened the package from Rockler Woodworking that our postal carrier had delivered earlier in the day.

The maple veneer from Rockler was a bit darker than I had hoped, but it will still be a nice contrast to the walnut trim when suitably finished.  The two shelf brackets were certainly substantial enough but it remains to be seen if the wall of our coach is adequate to support the table without a leg to the floor.  The main issue will be the fasteners near the top which will be in tension and trying to pull out of the wall.  Of secondary concern will be the lower tip of the brackets, which will be in compression, trying to push through the wall and possibly puncturing it.  I may have to use expanding bolts or toggles rather than screws for the upper (tension) fasteners.

We had some hot tea and went to bed.  Although I did not get to work on the bus today I got a lot accomplished and we had a great time watching our younger grand-daughter experience Halloween.

 

2015/10/19 (M) Flashless

Linda was up at 5:45 AM and out the door by 6:15.  I woke up but went back to sleep and finally got up at 7:30 and got dressed.  I turned on the furnace in the garage and turned up the thermostats in the bus and then had breakfast.  Rather than grind up a small quantity of coffee beans and get the coffee maker dirty I had a cup of tea.  I retrieved Butch’s e-mail and called Clyde in Canton to arrange pickup of the antique Sun distributor tester that Butch bought from him last night on Ebay.  I will drive down Friday to pick it up.

Phil showed up around 8:30 AM, unloaded his front loader, and got to work on the French drain.  I went out around 10 AM and talked to him briefly.  I then walked through the southwest corner of our property looking for a corner marker.  I did not find one but I did discover some REALLY big trees with REALLY BIG vines woven through them.  The base of the vines was as big as one of the trees, about 30″ in diameter.  I had never seen a vine root that size.

Back at the house I called John Palmer, of Palmer Energy Systems in Florida, to update him on my recent call to Magnum Energy technical support.  He said he would talk to Tom in the next couple of days and try to get me the connector (terminal block) I need.  We agreed I will call him back on Friday.

Next I called A-1 Upholstery in Elkhart, Indiana and talked to Terry.  I ordered a bolster cushion to fill in the space behind the sofa seat cushions and below the sofa back cushions.  It will be 6″ high x 4-3/4″ deep x 78″ long and will be one density of firm foam rather than a firm center layer with softer outer layers on top and bottom (like the seat cushions).  She will use a plain beige fabric as it will not be visible and so it does not have to match the other sofa cushions.  She said it would be ready in early November, which is plenty of time for us to drive down and get it.  The price was $125, which sounded like a fair price to me.

I got out my old Sunpak DX-8R ring flash and connected it to one of my Quantum high voltage battery packs but the battery pack appeared to be dead.  The two battery packs I have are almost unused but have apparently self-discharged and are now dead.  This also happened to my original battery packs.  The only flash equipment I have is set up to run off these packs but I am not inclined to replace them again as I do not use them enough to keep them charged which makes it hard to justify the cost as they are expensive.  Unfortunately that leaves me, for the moment, without any flash capability for the new Sony SLT-A99V DSLT camera.  Buggers.

I sent a TXT message to Joe to let him know that I did not see any indication of axle/hub seal leaks on the inside of the bus wheels.  I then called Bill in Mexico, Indiana and left him a message regarding the antique Sun distributor tester.  I will drive it at least as far as Elkhart, Indiana when I pick up the bolster from A-1 Upholstery and transfer it to Bill if he can meet me there.  There is also the possibility that I will drive it all the way to Bill’s place in Mexico, Indiana and stop by Jarel Beatty’s cabinetry shop in Logansport to have him cut down the connector on the passenger side HVAC duct cover.  If I do I will also pick up the drawings for the desk, sofa, and pull-out pantry as long as I am there.

Phil checks the grade of the new driveway extension.  The laser level is set up by the utility pole.

Phil checks the grade of the new driveway extension. The laser level is set up by the utility pole.

I went back outside and walked through the layout of the driveway extension with Phil.  He then set up his laser level, took elevation measurements at various points, and made an annotated sketch.  He needed to think about the data and figure out what we could actually do given the change in grade from the existing concrete driveway to the road at the third culvert and the need to flatten out before reaching the culvert to tie in with where the barn will (might) eventually go.

Keith, from Kish Lawn Care, showed up around 11 AM to mow the grass.  I got out our leaf blower and let Phil know that I would be occupied for a little while with yard work.  I blew the leaves off of the rear decks, out from under/around various bushes, and off of the two boulder retaining walls into the yard where Keith could mulch them with his riding lawn mower.

About the time I was done blowing leaves Phil had a plan to discuss.  The elevation drops 7-1/2 feet from the concrete driveway (that goes from the street to the garage) to the street at the third culvert some 200 feet away.  Phil thought that our best bet was to slope down from the driveway over a distance of 40 feet, level out for 40 feet, and then gently slope down for 70 feet to the area in front of the future barn location.  That would leave another 50 feet with a slight drop to get to the street.  Some of the area down there will be close to level, however, so another RV could park down there.

We also discussed running power and agreed that I would buy about 40 feet of plastic conduit to get under the level area and headed towards the southwest corner of the garage.  We would need the conduit first thing tomorrow morning so I decided I would go to Lowe’s this evening.

I finally got to work in the bus around 1:30 PM.  I positioned the sofa seat, secured the piano hinge to the stationary backboard with four screws and then drilled all of the other screw holes using my smallest VIX bit.  I installed all of the little screws, dialed back the thermostats, and closed up the bus.  My time-on-task was short but it was a big item to check off of my “list.”

The Sunpak DX-8R ring flash can operate on four AA batteries so I put a set in and connected it to the hot shoe on top of the camera.  The camera was able to trigger the flash (more than once) but the shots were seriously overexposed.  I did not take the time to try and figure out if the flash can be controlled by the camera based on light coming through the lens.  If not it won’t be usable in most situations.

It was a mild day with blue skies and white puffy clouds so I took the new camera outside to capture some images of the work Phil is doing.  I shot a few frames of the more colorful trees in our yard while I was at it.

Linda texted me at 3:40 PM to let me know she was leaving the bakery and stopping at the store on the way home.  Phil continued to find rock, concrete, and brick debris as he dug out the driveway extension.  He used the 30″ toothed bucket on his excavator to sift out the larger pieces and pull them into a pile and then used his front loader to put all of it into his dump truck.  I got a metal tine rake and raked out some of the smaller stuff, not because it needed to be removed but because I needed to do something physical and wanted to smooth it out to get a better idea of how it will look when finished.

Phil started securing his equipment at 5 PM and we were wrapping up our last discussion of the project for the day when Linda got home at 5:30.  After unloading a few groceries she started fixing dinner.  Phil took off and I continued raking for another half hour until dinner was ready.  Linda served the rest of the polenta with puttanesca sauce and steamed sliced parsnips.  I thought we finished the Cupcake Black Forest wine last night but I was pleasantly surprised to find out that we still had enough for our meal this evening.

After dinner I went to The Home Depot looking for a fuel filter for our Cub Cadet lawn tractor.  THD sells Cub Cadet equipment but only had generic fuel filters so I did not buy one.  I went to Lowe’s, where we get a 5% discount on everything we buy! and bought the following:  four 10-foot pieces of 2″ PVC non-conductive conduit, a 90 degree elbow, a coupler, two end caps, 1″ and 1-1/4″ self-drilling screws, an 8′ long pressure treated 4×4′, and a clamp on saw guide.  The saw guide was an impulse purchase but I had a $10 Off card for a total purchase of $50 of more.  We have struggled with makeshift saw guides all summer and fall and I still have more careful cutting to do.  I already have a saw guide but could not find it and should have bought a new one at the beginning of the bus remodeling project.

Phil called the house while I was out so I called him back.  He had figured out that extending the driveway to within 10 feet of the front of the proposed bus barn would add 25% to the cost of the project.  That was more than I was prepared to spend at this time so we will defer that work until we build the barn, probably in summer 2017.  We watched Scorpion and NCIS Los Angeles and then went to bed.

 

2015/10/15 (R) Camera Software Updates

We had breakfast and coffee as usual but Linda had to leave at 9 AM for a 10 o’clock meeting at the bakery.  I had the fireplace on and hot coffee in my cup so I just stayed put in the living room in my warm winter robe.  I was finishing yesterday’s post when I got a call from Joe Cannarozzi looking for Chuck Spera’s phone number.  My N/A/P book is in my phone so after we were done talking I looked it up and texted it back to him.

After wrapping up yesterday’s blog post and starting today’s I spent a little time with the manual for the new Sony a99v DSLT camera and added a BC-VM10 battery charger to my B&H Photo cart.  Around 10:15 AM I made a follow up phone call to John Palmer at Palmer Energy Systems regarding the terminal block for the Magnum Energy Battery Monitor Kit (BMK).  John had not had a chance to talk to anyone from Magnum and indicated that his main contacts were away at a trade show.  He will still try to follow up with them but thought I might do just as well calling them directly.  They are in Washington State but are relocating to Minnesota as a result of being purchased by Sensata Technologies so I deferred the call until later today.  John said their phone and e-mail contact information had not changed yet, but he thought it might eventually as a result of the sale to Sensata and relocation to Minnesota.

There wasn’t much I could do with the desk in the bus without Linda’s help so I gathered up the laundry and started a load.  I then worked in my office for a while.  I was going to off-load photos from both the Sony a100 and Sony a99v but the Play Memories Home software indicated that updates were available and certain features (social media website interaction) required the newest version.  While I do not plan to interact with social media very much, photographically, I might want to at some point.  Besides, I like to have my software as up-to-date as possible.

The version that came on the CD-ROM was 1.03.something and the latest version from Sony’s website was 5.03.something, so my camera body was probably sitting at B&H Photo for quite a while.  The installer was a 15.6 MB download and program was a lot bigger than that.  It took over an hour to download, install, and then re-scan all of the images in the PICTURE folder, even though it just did this on Tuesday.  While I was waiting I got a solicitation from the Michigan VFW and agreed to send them a small donation of $10.

Rather than sit and stare at my computer screen I got the mail and then called Magnum Energy and asked for technical support.  I was caller number six in line to talk to someone so I selected the return call option from their menu and left my name.  Their system had already captured my phone number but had me confirm it.

One of the things I need to do with the new Sony a99v camera is figure out whether my old flash equipment can be used with it.  I found my Sunpak ring flash, my Metz CT-45, and my two Quantum Turbo gel cell battery packs.  The battery packs had their chargers connected so I set them up in the ham shack and plugged them in.

Linda called at 3 PM to let me know she was just leaving the bakery and planned to stop at Meijer’s.  That meant we would not be finishing the desk installation until tomorrow.  At that point I had not yet heard back from Magnum Energy; so much for being number six in line for a call back.

Debris piled where the new driveway extension will go.  Phil’s truck and large excavator in the distance on the road at the discharge end of the culvert.

Debris piled where the new driveway extension will go. Phil’s truck and large excavator in the distance on the road at the discharge end of the culvert.

I was just about to return to my office when Phil Jarrell showed up at 3:10 PM.  I put on my outdoor work shoes and sweatshirt and went out to join him.  We looked at the discharge end of the culvert and agreed on a game plan.  He unloaded his excavator with the 30″ toothed bucket attached, drove it back into the woods well beyond the end of the metal culvert, turned it around, and brought it back towards the culvert.  Phil’s Caterpillar excavator is a powerful machine and he was able to dig the large root loose that was blocking the outlet of the culvert.  He then dug a trench back from there for about 20 feet, clearing out lots of other stuff as he went, and then stopped.

Linda got home at 4 PM after deciding not to stop at Meijer’s after all.  I walked back to the house and suggested she come see what Phil was doing.  She did and then went back inside to do some bakery-related work at her computer.

A closer view of Phil’s truck and excavator.  He can move a lot of dirt, rock, and anything else he wants with this thing.

A closer view of Phil’s truck and excavator. He can move a lot of dirt, rock, and anything else he wants with this thing.

Phil used a shovel to clean out the end of the culvert, which was already filled with mud, so he could determine the elevation of the top and bottom of the discharge end of the culvert.  He then set up his laser level and started taking readings.  The 12″ diameter culvert drops 9 inches from the high end to the low end.  Phil said a 2″ drop would have been sufficient and the 9″ drop is actually a problem.  If it only dropped two inches most of the discharge end would be above grade.  But that is not the situation so we started working our way into the woods checking the elevation as we went.

The excavator positioned in the woods digging the large root out from in front of the discharge end of the culvert under the road.

The excavator positioned in the woods digging the large root out from in front of the discharge end of the culvert under the road.

By sighting down the center of the road in front of our house I determined roughly where the property line was.  Phil determined that if we continued trenching straight out from the culvert to the property line we would be out a total distance of about 50 feet and would be seven inches below the bottom of the inlet side of the culvert.  He also pointed out the soil he had already dug was very sandy and should drain well.  The fact that this whole wooded area had grass growing in it provided further evidence that it drained well.  A high clay soil would have held water and created an inhospitable environment for grass.

It was well past 5 PM and with the cloudy skies the light was fading so Phil did not want to go any farther today.  He also needed to get fuel in his front loader so it was ready to go first thing tomorrow.  He parked the excavator where it was out of the way and locked it before taking off.

 

 

The discharge end of the culvert with tree roots, dirt, and other debris cleared out of the way.

The discharge end of the culvert (dark hole center right) with tree roots, dirt, and other debris cleared out of the way.  The light gray horizonal stripe at the top of the screen is the road.

Linda made a wonderful pasta dish for dinner.  She used a whole wheat linguini and added it to a sauté of EVOO, garlic, onions, mushrooms, sun-dried tomatoes, greens, and Brussels sprouts.  Yup, Brussels sprouts in pasta.  It was a first for me and it was very good.  Earlier in the week she had picked up a couple of bottles of Barefoot Moscato at the store, one white and the other red, so I opened the red.  It was sweet, of course, but we both liked it and thought it went well with the pasta which was all savory ingredients.

After dinner I returned to my office and finally connected the new Sony SLT-A99V camera to my computer and transferred images to my laptop as I had set out to do this morning.  After completing the transfer I formatted both cards, changed the file system to create daily date folders, and set the USB transfer mode to Mass Storage.  I registered the body, vertical grip, batteries, battery charger, and SD memory cards along with the old Sony alpha 100 body and lens (DSLR-A100K) and then created entries in our password program with all of the relevant details.

The packaging for the SD cards indicated that there were two free software programs available to support the cards so I went to the referenced website.  One program was Memory Card Data Recovery and the other was X-Pict Story.  The purpose of the data recovery program is self-evident.  X-Pict Story is used to create slide shows.

Both programs required proof that I had qualifying media in the form of model and serial numbers in order to even download them.  I got the packaging for one of the SDXC UHS-1 memory cards and looked it over very carefully but could find either piece of information.  I took the cards out of the camera but could not see any identifying information on them.  I got my magnifying lens hood and with that extreme magnification I was able to just make out a model number (SF-64UY) on one side and 8-digit serial number on the other.

As long as I was in front of my computer I checked into RVillage and went through a dozen and a half notifications and “liked” or commented on a few.  There was an Ambassadors virtual meeting today 2 PM PDT (5 PM EDT but we were busy.  There is another one on Saturday at 10 AM PDT (1 PM EDT) and we will try to arrange our day so we can participate.

I spent some more time researching harness systems for holding cameras in front of me.  I think the 2-camera harness from Cotton Carriers may be just what I am looking for.  I was having trouble navigating their website using my iPad2 so I will look at their products more closely on the computer tomorrow.  I will also investigate whether I can order their products through Amazon or be better off ordering directly from the company.

Linda stayed up reading past 11:30 PM which is unusual for her.  I finished this post just after midnight but will look it over again in the morning before e-mailing it to myself.  Lights out; big day tomorrow with lots to try and get done.

 

2015/10/12 (M) Countertops Plus

I was up later than usual last night so I did not get up this morning until 8 AM.  I fed the cats but did not have breakfast or make coffee.  I put the ham radio antenna back on my car and reinstalled the control head and microphone.  I then reinstalled the GPS and the cellular booster.  I moved the front passenger seat forward, set the back all the way down, and the moved it back until it touched the passenger side rear seat, which I put down last night.  I got two 2x4s from the garage that were about seven feet long and set them on the reclined seats to serve as full length supports for the desk/counter top I was picking up today from Countertops Plus in Shipshewana, Indiana.

Linda got up at 8:30 AM and got a couple of blankets for me to use to protect the desktop and the tabletop once there were loaded in the car.  I made sure I had my checkbook, sunglasses, wallet, phone as well as the address and phone number for Countertops Plus.  It was a beautiful, clear, cool morning as I backed out of the driveway at 8:45 AM.

The GPS predicted I would arrive at 11:30 AM but tried to take me on a different route than the one I actually followed.  I followed my usual route, heading west on I-96 to Lansing and then south on I-69.  I stopped at the Shell station half way between Lansing and Charlotte but their pumps were all out of order.  (We encountered this same situation at our local Shell station on the way home from our ham radio club meeting last night.  We presumed they were out of fuel.)  I went to the BP station across the street and fueled my car.

I got off I-69 again at the Charlotte exit about 15 miles later and stopped at the Biggby’s coffee shop where I got a toasted bagel and a large coffee to go.  My coffee was 40% Biggby’s best (regular), 40% French roast (decaf), and 20% Michigan cherry (regular).  I was glad I did not use any more Michigan cherry than I did as the flavor is very strong and somewhat unpleasantly artificial.  Biggby’s is definitely not my favorite coffee but the location in Charlotte is about an hour into the trip to Indiana and conveniently located relative to the highway.

I stayed on I-69 as far as Coldwater and then headed west on US-12.  At Sturgis the GPS had me turn south on Centreville Road (M-66).  A few minutes later I crossed into Indiana and passed the Howe Military Academy in Howe.  I went west on IN-120 and then took several county roads before arriving at Countertops Plus at noon.

On the drive down I got a call from our mobile mechanic, Joe Cannarozzi.  He is tentatively coming to our house on Monday, November 1, to service the chassis and engine.

The office at Countertops Plus was unattended so I walked around the side and found owner Ferman Miller working in his shop.  He had me back up to one of the loading doors and helped me get the desk/counter top into the car and onto the pair of 2x4s.  He set the tabletop, which was much smaller, on one of the blankets on the floor in the rear.  I wrote a check for the balance (cash or check only, no credit cards) and got a receipt.  I set the GPS for home and headed back the way I came.

When I got back to Howe I got on the Indiana Toll Road going east and took it toI-69 where I exited and headed north.  I stopped at M-60 to have lunch and then drove across the street to the Shell station.  All of their pumps were also out of service so I drove back towards the highway entrance ramp and stopped at the BP station.  It appeared that whatever was affecting the Shell stations was widespread.  I got back on I-69 north at 1:30 PM and the GPS said I would be home in approximately 90 minutes.

The beautiful blue skies of the morning were becoming more and more obscured by clouds the farther north I traveled.  It had been breezy all day and that continued but with reduced intensity.  It was almost completely overcast by the time I got home.  I did not stop again and pulled in the driveway around 3 PM.  I backed the car in front of the bus and unloaded my personal affects.  We inspected and measured the desktop and table and were satisfied that they were the correct size and shape.  The plywood base was not exactly as I had specified it but the deviations will not prevent the desk from being assembled correctly or be visible.

While I was away Linda had removed the remaining wallpaper in the cockpit of the bus and made a trip to J. C. Penney’s at Twelve Oaks Mall in Novi to look for new privacy curtains for the front of the bus.  I was not in the mood to change into work clothes and needed to work on FMCA Freethinkers chapter roster and financial statements so I went to my office.  After cleaning up my desk and checking e-mail I got down to business.

Linda called me up to dinner at 6 PM.  We had a nice salad, Amy’s Spanish Rice and Bean soup, crackers with peanut butter and strawberry preserves, and watermelon.  We got a few raindrops on the rear deck while we were eating even though the probability of rain was near zero.  The weather is changing this week from mild and dry to cooler and a little wetter, with our first sub-freezing overnight low temperature forecasted for this coming weekend.  Cooler weather means more soup, which is fine by me.  It also means more mornings with the fireplace on while we enjoy our coffee; also fine by me.

I made progress on the Freethinkers chapter records but did not get done.  We watched a few TV shows on the big TV set in the basement; Big Bang Theory, Scorpion, and NCIS Los Angeles.  I did finalize plans for our visit with Bill, Karen, Mike, and Catherine at the Jellystone RV Park in Frankenmuth on Wednesday.  I also managed to get an e-mail off to Lou letting him know that the new camera had arrived.  We went to bed at 11 PM, put on the Create channel from the Detroit PBS affiliate (WTVS), and watched travel and cooking shows while I worked on this post.  Around midnight I thought I heard it raining but did not get up to check.

 

2015/09/21 (M) Back to Bus Work

We were up a little after 8 AM.  I showered while Linda prepared our breakfast fruit–blueberries, raspberries, and peaches–to go with our granola.  I made a pot of coffee, using up the Costa Rican half-caff, and then sat down to eat.  After breakfast we sat in the living room enjoying our coffee to the warmth and glow of the fireplace while Linda downloaded and installed iOS 9 on her iPad.  The download was 740 MB so I waited until the installation was done on her machine to start it on mine.

When we finally got to work our first task was to unload all of the wood from the car and store it in the garage.  My next task was to call Ferman Miller at Countertops Plus in Shipshewana, Indiana to make sure he got my message on Friday with the dimensions for the Corian top table.  I got his voice mail again and left another message.  I then called Josh at Coach Supply Direct to bring him up to date, got his voice mail, and left a message.

Linda planned to get a few things at Whole Foods Market as she needed to drive to Ann Arbor anyway to pick up our wallpaper from Delux Draperies and Wallcoverings.  While she took care of that I started figuring out what parts I needed to reconfigure the heating system.  Before making a run to the store I found all of my plumbing tools and supplies.  I got 20 feet of heater hose and 10 band clamps from O’Reilly’s and various copper fittings from Lowe’s.  I also got a drain hose and a clean bucket to catch/hold antifreeze.

Back home I removed the seat and back cushions from the sofa and stacked them on the chairs.  I removed the temporary plywood top from the desk and stored it in the garage.  I then uninstalled the desk pedestals from the wall and from their bases.  There wasn’t much else I could do without Linda’s help, so her return soon thereafter was timely.  We had a light lunch and then moved the pedestals to the sofa.  That left the bases free for me to work with.  I still did not have all of the parts I needed to install the fan-coil heat exchangers in the bases.  I also needed to remove the heater hoses in order to mount the heat exchangers and replace the hoses with different lengths and angled fittings.

As I was contemplating all of that I got a call from Chuck Spera.  He was in the process of setting up an appointment to have the lower windshields replaced on both of our rigs and wanted to make sure I was still interested and check my availability.  He called back a little while later to let me know we were set for next week Tuesday in the morning.

I then got a call from Joe Cannarozzi.  Joe has done a lot of work on our bus over the last five years, especially the chassis.  He called to confirm that I still wanted him to stop at our place on his way back to Chicago around Halloween and discuss what I needed done.  Yes, I did, and what I needed was routine maintenance; lube, oil, filter(s), brakes, and possibly axle hub seals.

When we first started working with Joe he had an active, full-time mobile bus repair business, specializing in Prevost chassis service.  The last couple of years he has worked a regular gig in upstate New York from April through October.  He still services a few buses, like ours, starting in the north in the late fall and working his way to Florida for the winter where he tries to get to the Keys and take 4 to 6 weeks off before working his way back up to New York in the spring.  When we wrapped up the call I texted Chuck to let him know that Joe would be coming this way.

I called Ferman again and this time he answered the phone.  He had gotten my two previous messages and I was correct that there was not enough material in the large sheet of Corian to make the table.  He had not had a chance to check his stock to see if he had any more of the Sandstone.  I mentioned that Josh had another vendor with a 30″ by 40″ piece.  Ferman indicated that if he doesn’t have another piece he would be willing to work with that piece if Josh got it.  I called Josh and he answered this time so I walked him through the current status.  He called the other vendor and called me back.  The piece is 30″ by 48″ and he was willing to sell it for $175.  Josh and I agreed to give Ferman a couple of days to check his stock before pursuing it.

Linda was working at her desk on a proposal for the bakery and preparing a bank deposit for our GLCC chapter.  I went to the garage and began soldering 3/4″ copper plumbing fittings.  I need to route the 3/4″ rubber heater hose around corners that were too sharp to just bend the hose so the copper fittings will take care of that.

Linda called me to dinner at 6 PM.  We had a nice salad, vegan Italian sausage with onions, and Brussels sprouts as a side.  A small glass of Moscato made a nice accompaniment.  After dinner I checked my e-mail and took care of the cats’ liter tray.  I then drove to Lowe’s for two more 45 degree street elbows.  On the drive home I talked to Mike (W8HX) on the South Lyon 2m repeater.  We discussed getting me back up our tower sometime in the next 9 days if my work on the bus progressed to the point where I could afford the time.  We went to bed early enough to watch a few TV programs and then fell asleep.

 

2015/04/26-30 (N-R) Routine Returns

2015/04/26 (N) Bentley

Turning the lights out at 11 PM last night meant I would be awake around 6 AM this morning and ready to get up, and that was the case.  Linda was awake by 6:30 AM and we were up shortly thereafter.  I was able to light the natural gas fireplace without difficulty.  The only thing I can figure is that perhaps I did not have the Off/Pilot/On gas valve in the right position last night.

With the gas valve in the Off position gas cannot flow beyond the valve.  In the Pilot position gas can only flow to the pilot flame assembly, and only while the knob is pushed in, until the flame has been lit long enough to cause the heat sensitive pilot valve to remain open at which point the knob can be released.  I do not think gas can flow to the main burner tubes, however, until the knob is turned to the On position.  There is also a Remote/Off/On switch that has to be in the Off position when lighting the pilot flame (with the built in spark igniter) and moved to the On position to allow the main burner tubes to receive gas.  All I can figure is that I did not have the Off/Pilot/On valve turned to the On position. The Remote position is intended to be used with a wall mounted thermostat which we do not have.  For us the firelogs are primarily decorative but are useful for taking the chill off of the early morning or late evening.  We never have them on, however, unless we are in the living room or dining room where we can see them.

Linda fed the cats while I made coffee which we enjoyed in the living room by the firelogs.  It was 33 degrees F outside this morning but in another week the morning temperatures should be such that we can sit on the rear deck and enjoy our morning brew out there.  We finally both got dressed and Linda heated an Amy’s Breakfast Scramble and split it between us.  We lingered a while longer in the living room and finally got to work on our various chores.

Linda’s focus was to continue cleaning the kitchen, off-loading food and kitchen supplies from the bus, and getting her domestic and professional domains back in order.  She made a grocery list as the day went along.  We would normally go to the Howell Farmers Market on Sunday morning, but the outdoor market does not start until next week.

I cleaned the cats’ litter tray, which seems to be my job at home but Linda’s job on the bus, and then got to work on revising the draft survey for the FMCA national education committee.  While I was doing that I also started up a couple of our workstation computers, installed updates, and kept an eye on my e-mail and RVillage messages.  I worked on the survey until dinner time, with a break for lunch, and had Linda proofread it before I uploaded it to my Dropbox and e-mailed the link to the committee.  We have a telephone meeting at 3:30 PM EDT tomorrow and I wanted everyone to have a chance to look it over in advance of the meeting.

Linda made Farro with garlic, dried cranberries, almonds, and kale and cooked some fresh asparagus.  A green salad and a glass of wine completed a very nice meal.  Linda had a text message from her sister letting us know that her housemate, Linda, decided to have Bentley put down.  He was the oldest of her three dogs, deaf and arthritic, and on medications that he would not take, and he had lost interest in food.  We had both received a text message from Linda regarding our recent visit so I responded to that.  We were sad that Bentley was gone, but glad that we got to see him one last time.

I turned my attention to editing photos for my April 10 blog post about out visit to Bandolier National Monument and Santa Fe, New Mexico but the batteries in my wireless mouse needed to be recharged so I plugged it in and called it quits for the night.  Linda was watching the first episode of Wolf Hall (PBS) on her iPad so I finished reading the May-June 2015 issue of the Gypsy Journal and played a few rounds of my favorite games.  Linda prepared some fresh berries for dessert and we enjoyed them to the glow of the firelogs before going to bed.

2015/04/27 (M) Caller #9

After coffee and cereal this morning I continued selecting and processing photos from our April 10 visit to Bandolier National Monument and Old Town Santa Fe.  I ended up with 16 photos so I uploaded the post and put them in an image gallery at the end.  After lunch I got all of my documents in order for my 3:30 PM (EDT) telephone meeting of the FMCA Education Committee.  I chatted briefly with the committee chair to see if there were any surprises in store.  I then worked on consolidating my draft blog posts for April 11 through 15 which included the time we spent in Norman, Oklahoma visiting with my uncle Bob and Aunt Helen, and four additional generations of relatives.

I exchanged e-mails with BCM Publisher Gary Hatt and Editor Dave Rush regarding my article on the redoing of the exterior of our coach.  The article is 5,800 words with 71 photos and they would like to split it up and run it in installments over three or four issues.  That will require me to go back through the article and identify the places where it can be split, making sure the photos track with the text, and write some additional bridge paragraphs to wrap up each installment and introduce the next one.

I dialed in to my FMCA meeting just before 3:30 PM.  I was caller number nine (9) but I did not win anything.  The meeting lasted almost 90 minutes.  We discussed the survey we have been developing and approved a motion to pass it along to the Executive Board with the recommendation that it be sent to a random sample of the members both electronically and via USPS.  I expect to receive minor corrections in the next 36 hours and get a final draft to the FMCA Executive Director on Wednesday so he can have it reviewed by an outside expert (Barry) at Membership Corporation of America (MCA).  The FMCA executive board meets in a week so we will see what happens.

After the meeting I finished working on the April 11-16 consolidated post and uploaded it to our personal blog just in time for dinner which featured taco bowl salads.  She started with refrigerated tortillas, draped them over ramekins, and baked them to create the shell.  She reconstituted an ancho, red Hatch, and pequin chile and used them to season the pinto beans, mixed greens, tomatoes, onions, and olives that made up the filling.  Franzia Fruity Red Sangria went nicely with the tacos.  Later we had a fresh mixed fruit salad of blackberries, blueberries, strawberries, and bananas.  We relaxed for a while, reading and playing games, but were surprisingly tired and went to bed before 10 PM.  Change happens, transition takes time.

2015/04/28 (T) And now … the rest of the summer

As sometimes happens when we go to bed early, we slept in this morning and did not get out of bed until after 8 AM.  It is nice to be able to do that if we want to.  Coffee and toast got the day started followed by reading, writing, and cat admiring.  It was a beautiful, sunny morning albeit still on the chilly side.  In other words, another day in the idyllic paradise we call retirement in the country.

We have both been busy since we got home last Friday, unloading the bus and putting things in their place in the house, visiting family, cleaning and stocking the kitchen, going through mail, and working on bills and accounting, both personal and organizational.  And that was mostly Linda!  I helped with some of that but was mostly focused on finishing a draft survey for the FMCA education committee, sending it out, and participating in a committee meeting by teleconference yesterday afternoon.  I will have some minor additional work to do on the survey by the end of the day tomorrow, but with the meeting behind me I can now concentrate on all of the other things that need to be done.  To paraphrase Paul Harvey “And now … the rest of the summer.”

One of the chores that is always there is laundry.  Linda seems to take over this task when we are living in the bus, but it is definitely my job when we are at home.  Ditto for cleaning the cat litter tray.  To be fair, both the laundry room and liter tray are in the basement where my office and the ham radio shack are located, so I am down there a lot more than her.  When we first return home after being away for an extended time there is a lot of laundry to do.  Not that we don’t do it while we are away, we do, but I like to clean everything that we had with us.  This is not a one day task, in part because we like to limit the number of loads of laundry we do on any given day so as not to overload the septic tanks, and in part because I just do not want to spend an entire day doing laundry.

My main focus this morning, however, was to revisit my article for Bus Conversion Magazine on the renovation of the exterior of our bus back in 2011/2012.  It needs to be split into 3 or 4 installments and I would rather do that myself, making sure the photos track with the text.  I started a load of laundry and then got to work, keeping an eye on e-mail and RVillage.  I finished restructuring the article just before lunch, uploaded it to my BCM Dropbox folder, and e-mailed the editor and publisher.  Linda reheated the Farro-cranberries-almonds dish for lunch and served it with black grapes.

I moved the first load of laundry to the dryer, put a second load of laundry in the washing machine, and started compiling my posts for April 16 through 20.  I got an e-mail from Lou Petkus regarding the SKP Photographers BOF website.  Lou started, and leads, the BOF and administers the website while I take care of the RVillage group and someone else takes care of the member database/roster.  He found and installed a free system for displaying photo albums.  He was setting it up so each BOF member had their own login and could upload their own photos and wanted me (and Linda) to try it out.  I did, and found a number of issues which I documented for him.  I like the idea, so I hope he can resolve the issues.

I folded and hung up the dried laundry and returned to my blog post which I uploaded, tagged, and published before going upstairs.  It was a beautiful day and while Linda was outside on the rear deck reading four deer walked up the eastern boundary of our property.  We were chatting back there when the doorbell rang, which is unusual for us.  It was Aaron, one of the kids (teenager?) from the house to our immediate east.  UPS had delivered our Amazon order to their house instead of ours even though it had my name and our address on the label.

Linda sautéed onions until they were partly caramelized, pan-fried tofu slices, and then added bar-b-que sauce.  She served these in tortillas rather than on buns.  She also sautéed fresh green beans.  I opened a bottle of Barefoot Moscato and we each had a small glass with dinner.

After dinner I called Joe Cannarozzi, the mobile mechanic who has done the majority of the service work on our bus since we got it back to Michigan in 2010.  As planned, he is now in upstate New York where he will be working well into the fall.  He plans to be back this way the first week in November and we made plans to have him do the routine chassis maintenance at that time.  I also discussed our interior renovation plans for the bus and got some tips from him about how to approach that work, especially the floor, as he has done several.

I noticed that I had a voice message from Gary at BCM.  He had called earlier in the day after I had uploaded the new 4-part version of the Exterior Makeover article so I called him back and left him a message.  Tag; you’re it.

2015/04/29 (W) Bus Lunch

We had a typical start to our day; coffee, breakfast, and iPads (news, weather, games, reading, and writing).  Actually, that’s how most of our days in the bus also start, so the only real difference is where we are sitting and what we can see from that vantage point.  I needed to order a refill on a prescription medication so I tried doing that on my iPad.  No problem iPad-wise, but the Michigan Public School Employees Retirement System (MPSERS) had switched the mail order prescription drug service from Medco/Express-Scripts to Catamaran Home Delivery effective January 1, 2015.  Catamaran was already the third part administrator (TPA) but was now operating their own pharmacy.  Even though I already had a Catamaran account I had to register for Home Delivery service.  Once I did that I was supposed to be able to see any prescriptions that had transferred over.  There weren’t any 🙁  That meant I needed a new prescription.  I had a mid-morning appointment and did not want to spend time “holding for the next available representative” so I decided to take care of this task tomorrow.

Linda called last Friday and arranged to have our curbside trash pickup resume this week.  Wednesday is trash pickup day, so the trashcan had to go out by the street this morning.  (We don’t have curbs here, so I can’t say we took the can to the curb.)  The last two years Alchin’s has come past our house around noon.  While we figured that would probably be the case again this year we did not want to risk missing the truck, so Linda took it out early.

Linda is the treasurer of SLAARC, our local ham radio club based in South Lyon, Michigan.  The club’s bank (First Merit) is there and she needed to make a deposit.  I was headed that general direction so I took it with me.  The deposit made, I headed on to Chuck Spera’s bus garage in Novi, MI.  Chuck and Barbara have the same model Prevost bus that we do only one year newer and converted by Liberty, so fancier than ours.  Like us, they spend a lot of time in it, and, like us, there are always projects to be done.  Some of those, in turn, require some discussion.

I met Chuck at his shop at 10:15 AM and had a look at his turbo boost sensor intake manifold pressure hose.  It appeared to be intact but old a frayed like mine was.  The one on our bus failed on the drive out to Quartzsite, AZ in December 2014.  Changing his hose would be more difficult than our as is chassis batteries are in the passenger-side engine bay and make access to that side of the engine much more difficult than in our bus.  We have been using the same mobile mechanic for the last few years but he has found longer term employment and cut back on the mobile servicing of Prevost chassis.  I indicated to Chuck that we really needed to find someone locally who is in business at an accessible location and plans to continue as such into the foreseeable future.  He suggested that we take a drive to Johnie’s in Walled Lake, so that is what we did.

Denny was not there (Johnie was his dad) but I got to see the place and now know where it is.  We drove back to the Panera in Novi for lunch and then back to Chuck’s shop which is nearby.  By 2 PM we had not only solved all of the world’s problems we had made good progress on unraveling the mysteries of the universe.  Wanting to leave something for the next conversation I headed for home leaving Chuck to ponder the mysteries of the bus, which are far more baffling than the mysteries of the universe.

I drove home on Grand River Avenue (GRA) to avoid WB I-96 and the I-96/US-23 interchange construction.  I bought gas at the Wixom Meijer’s and found out 20 minutes later that I had paid way too much for it ($2.59/gal).  The BP station in Brighton had regular for $2.29 and the Shell station closest to our house had it for $2.44.  Bummer.  I passed a First Merit Bank on the south side of GRA just west of Old US-23 in Brighton.  Not right around the corner from our house, but a lot closer than South Lyon.  There is also a Jeep dealership there.  We are interested in getting a Jeep Wrangler Unlimited, we just don’t like the prices we are seeing.

Our Amazon shipment arrived with the two filter cartridges for the under sink housing in the bus and other things.  Hopefully the delivery to the wrong address on Monday was a one-time thing.  I had been trading phone messages with Gary at BCM and finally got through to him this time.  I then curled up with the new B&H catalog which made it feel like Christmas in April.

Linda made a potato lentil ginger curry for dinner and it was very good.  I had planned on revising the FMCA Education Survey and sending it out this evening but I was simply not in the humor to go back downstairs.  I think my retirement motto is going to be “there is always tomorrow, and if not, it didn’t matter anyway.”  Linda had to get up early tomorrow morning to beat the traffic headed into Detroit so we went to bed earlier than usual.

2015/04/30 (R) Steel

Linda set her alarm for 5:45 AM.  The purpose of her alarm is to wake me up so I can wake her up.  It worked as planned and she got up and got ready to go to the bakery while I went back to sleep.

I finally got up at 8:30 AM.  I’ve been busy since we got home but also a bit tired and feeling the need to just unwind from our exciting winter out west.  After breakfast I called the Internal Medicine clinic at the Henry Ford Health System Columbus Center in Novi to see if I could get my doctor’s nurse to get my doctor to write me a new prescription for my nasal spray.  Naturally I never got to talk to the doctor or a nurse, but the youngish sounding lady who handled the phone call was very helpful, up to a point.  She really wanted to schedule me for an appointment and was not quite piecing together that my prescription, which is for a maintenance drug, is only good for one year but my doctor only needs/wants to see me every other year.  I don’t expect the new script to be a problem, but that fact that my MPSERS health care plan changed mail-order prescription providers as of January 1st may add a wrinkle.  I’m not due for a physical until the fall but I will go sooner if needed to get my script.  Which reminds me, I need to schedule my annual appointment with the dermatology PA.

I focused on making some last minute corrections to the FMCA education survey and shipped it off.  I got an e-mail back from Diane Wolfe with some questions.  She is not a member of the FMCA education committee but she and husband Brett did review and comment on it.  The questions were interesting and answering them gave me a chance to explain some technicalities and cc: the FMCA Executive Director as they were as much for his benefit as hers.

I had several e-mails back and forth with Kate regarding productions at Meadowbrook Theater and an exhibition at the Detroit Institute of Arts (DIA), all of which sounded interesting.  Our social life is less active at home than on the road so we welcome such opportunities.

I had a phone call from Mike at Rocket Steel Buildings following up on an inquiry I made.  He sent me a brochure and a price.  It was something but not exactly the quote I was looking for.  I still need to follow up with SteelMaster Building Systems and get to work on drawings for the wood-framed basilica design.

I compiled my blog posts for April 21-25, 2015 after finding the one for the 24th.  I had e-mailed it from my iPad but it never arrived.  I e-mailed it again and it bounced back.  The spam blocker even said it was from a white listed sender (me!) but rejected it anyway.  Huh ???  I sent it a third time to two addresses, one of which was not attached to our domain, and it came through to both accounts, naturally.  I guess this was one of the mysteries of the universe that Chuck and I left unsolved yesterday.  Anyway, I finally got it, finished compiling my posts, and uploaded, tagged, and published it.

I also had several e-mails back and forth with Lou Petkus regarding the SKP Photographers BOF and website.  Gary sent me a link to a document in his Dropbox with photos and audio files from an interview he did for a featured bus article that never got written.  I agreed to take a look at it and see what I can do.

I managed to get more things off of the bus, including bedding, and did two more loads of laundry.  I do not like to do more than two loads a day as it over taxes the septic system.  Someone rang the front doorbell, the second time this week.  This time it was Kaylie, Aaron’s sister, from next door.  For the second time this week UPS delivered a package, correctly addressed to me, to the wrong address.  I was concerned this would happen and Linda said I was a pessimist.  Apparently we were both right.

I called the local UPS store but the only thing they could do was give me the national 800 customer service number.  I am a pessimist (just ask Linda), so I was not looking forward to that experience, but I called and fought my through their voice menu system.  It did not include an option for my situation (of course) and I finally just kept saying “agent” until the system gave up and connected me to a real person.

“Chelsea” was apologetic, even though she had not personally done anything wrong, because that’s what customer service people are trained to do.  I think someone, somewhere, once upon a time figured out that apologizing diffuses customers who are upset.  Well, it doesn’t.  And assuring me that it “won’t happen again” is equally meaningless when it comes from a person who is not in a position within the organization to make such a statement.  But Chelsea verified my name and address and the incorrect delivery address and said she took careful notes and would make sure they got to the right person.  I hope so.

What is perhaps most frustrating is that UPS has a local distribution center in Howell, and I have the address, but it is not open to the public except for limited package pickup hours.  In other words, the mistake is being made by a driver who is most likely operating out of that location, or by someone scheduling the routing, but there is no customer support person or facility manager that I can talk to, face-to-face, and resolve this at the point of origin of the problem.  We buy a lot stuff now through Amazon Prime, and it all gets shipped via UPS, so having it delivered anywhere other than to our house is a problem.

Linda called at 4:30 PM to let me know she was leaving the bakery at 5 PM and heading to Kathi’s.  They were going to have dinner at La Marsa in Farmington Hills and give the I-96 traffic a chance to subside before she finished the drive home.  I had some of the leftover potato barley ginger curry for dinner and then called Phil Jarrel to remind him that we are still trying to figure out how to put up a bus barn and still want him to do the site prep and driveway.  I then called Butch to see if he was able to locate the front brake drums for their MCI MC-9 NJT bus.  He was, and already had the driver side front reassembled.  I responded to a couple of e-mails and filled out an online RFQ for SteelMaster Building Systems and went to bed.