Tag Archives: Irene’s Beans (Milford MI)

2013_08_09-12 (F, S, N, M) Odds And Ends

Leave a reply

There is a certain routine to being back at the house, and when we are here it feels like we should get back into that routine.  Otherwise, it becomes too easy to sleep in, start slow, and not get around to even thinking about doing things until the afternoon, by which time it is too late to start anything.

Friday we were still unloading a few things from the bus, finishing up laundry (me), weeding the flower beds (Linda), catching up on accounting tasks (Linda), catching up on operating system updates (me), and other such necessities of daily living.  I placed calls to various service providers and filled out an online trouble report to try and get our AT&T phone line back in service.  Based on the missed calls on our answering machine, it appears that the phone line quite working around June 25th.  What I found interesting was that our High Speed Internet (HSI/DSL) worked fine and never went out.

With necessary chores attended to I turned my attention to writing first drafts of articles for Bus Conversions Magazine (BCM).  I had started an article a while back on the exterior makeover so finished a first draft of that and sent it off to Michele Henry of Phoenix Paint for review.  I had six other projects I had worked on the last 11 months that I also thought would make good articles.  Over the course of the weekend I completed first drafts of all six and sent all seven article drafts off to the Publisher (Gary Hall) and Editor (Wendy Crosby) of BCM, sans pictures.

Until today (Monday) the weather has been delightful since we returned, with blue skies, a few puffy white clouds, highs in the low-to-mid 70’s and lows in the upper 50’s.  Friday evening we decided to get out of the house for a while so we drove to downtown Brighton and went for a walk along the Mill Pond.  This is a large pond formed by a small dam in the heart of downtown, and it has a boardwalk that runs along the east side for about 1/2 mile.  Besides people there were ducks and geese, including babies, and a swan.  We also saw bluebirds and two muskrats.  Downtown Brighton is a happening place on a Friday night.  There were lots of people at the many restaurants, but equally many out walking.

Part of our routine is Saturday morning ham radio breakfast, usually with the South Lyon Area Amateur Radio Club (SLAARC) of which we are members, but occasionally with the Novi Radio Club.  Having been gone for a while we went to the SLAARC breakfast.  It was good to see our ham radio friends and catch up on what everyone has been doing.  Folks were interested in our travels, of course, and we enjoyed sharing a little bit about that.

Back home I decided to run a computer network cable from our AT&T Gateway to my office in the basement so I could connect the computers down there to a hub and and connect it back to the Gateway.  I’ve been trying to accomplish this connectivity with WiFi, but have had limited success.  I ran a small experiment first to make sure it would work, plugging my laptop into the hub and the hub into the Gateway with all of the components in close physical proximity to the Gateway.  It worked, so I proceeded with the larger project.

I had to enlarge a hole from the basement up into the wall cavity behind Linda’s desk, and managed to nick the Cat5 cable that carries the DSL/phone signal to the Gateway.  Naturally the AT&T repair truck showed up a short time later.  That did not turn out to be problem, however, as the technician very quickly determined that the problem was somewhere upstream in their system.  He had our signals restored at the outside junction box long before I was ready to reconnect to them.

I managed to get the Cat6 network cable run through the suspended ceiling in the basement and into the office.  I put the hub in the center of the room and ran the longest cables I had from various devices across the floor and over things.  I would include a picture, but it isn’t a pretty sight.  😉  The hardwired connection isn’t necessarily faster than the wireless one, but it stays connected, which is more important than speed.

While I was at it I decided to run a new, higher quality Cat6 cable from the AT&T junction box (outside) to the AT&T Gateway (inside).  After poking around in the attics above the garage and the house, I decided that this was not a project that had to be done at this time.  As I have worked on projects in the basement I have been removing old telephone wires as we use a cordless phone system and the wiring is obsolete.  I was going to to continue that work, but decided for now to just fix the cable I had damaged and get our phone/DSL connections back on line.

Another part of our routine is the Sunday morning Howell Farmers Market.  The nice weather continued and we enjoyed strolling through the market and talking to the vendors.  We bought some corn and peppers and herbs.  We bought some more coffee beans from Irene’s Beans of Milford, and also from Teeko’s of Howell.  Teeko’s is not far from our house and they keep their beans green until you buy them.  They then roast them to your taste while you wait.  They have a very wide selection of beans, including 100% Kona and Jamaica Blue Mountain.  These are premium coffee beans and are not generally available even at upscale food markets.

On Sunday Linda split her time between weeding, her computer, and just relaxing, which usually involves reading.  Of course she also took time to make meals, which were good, as usual.  I continued working on articles drafts and started updating our GPS units.  I had the docking/update software for both units installed on an older laptop that is not very fast, even with a hardwired network connection.  I replaced the hard disk drive in that laptop some time ago with a solid state drive as I plan to use that computer to run the Silverleaf VMSpc software for monitoring the bus engine while I drive.  I figured the SSD would be more tolerant of bumps and vibrations.  It probably is, but I did not figure on how incredibly slow it would be.

It took quite a while, but I got the Garmin nüvi 465T updated.  This is a nice little GPS unit designed for truckers (the T model) with a 4″ diagonal screen.  Because it is designed for truckers, we can create profiles for different vehicles/combinations, including length, width, height, and weight.  That is very handy when driving a large vehicle.  We use it in the toad, and as a backup for the bus.  I need to move the docking software to my newer laptop if I can figure out how to do it.  Part of the problem is that I also have map subscriptions installed on the old laptop and have to move those as well.

Sunday night was our monthly SLAARC meeting in South Lyon.  Linda opted not to go, but as the Vice-President of the club for this year, I really needed to make an appearance.  Besides, the program was on how to use an oscilloscope.  The presenter was (Dr.) Steve Smith, N8AR, a member of our club and retired electrical/communications engineer who worked on the space program at one point in his career.  Steve has done a number of presentations for our club.  They are always good, and they always draw a crowd, and this was no exception.

This morning (Monday the 12th) we woke to find it very overcast with a high probability of showers for most of the day.  That meant we would not be doing much outside work today.  Our Honda Element (towed vehicle) was overdue for it’s 75,000 mile service, so we took it to Brighton Honda right after breakfast.  While I was getting it written up Linda picked up my favorite Amy’s frozen pizza for dinner as she had plans for dinner and movie with Diane; their belated annual birthday night out.

I planned to continue working on my articles for BCM, selecting, adding, and annotating photos to illustrate them.  But first I decided to install the docking software for our Rand-McNally RVND7710 GPS.  That was easy; the software resides in the non-volatile memory of the unit, which connects to the computer via a USB cable.  I checked for updates; there were some, so I installed them.

I then decided to purchase the Lifetime Map updates, which I had not done previously.  I accomplished that easily enough but had a little trouble getting the docking software to accept the Activation Key.  Closing the software, powering the GPS down, turning it back on, and re-launching the docking software got it to work, but that wasn’t part of the instructions.  Great; time to download and install updated maps, which I did.  It took eight (8) hours!  I know our Internet connection is not very fast, and  I have no idea how much data got downloaded, but 8 hours?!  Unfortunately that tied up my laptop for most of the day, so whatever else I had hoped to accomplish got delayed.  But that was OK; it rained all day, and a slower pace with a subdued tone somehow seemed appropriate.

 

2013_06_30 (Sun) Happy Birthday

Leave a reply
Sunrise over Boxelder RV Park, CAM-PLEX, Gillette, WY

Sunrise over Boxelder RV Park, Gillette WY CAM-PLEX

Linda was up early this morning and went for a sunrise walk.  Perhaps she was too excited to sleep because it was her birthday, but this is the 53rd Escapade and the 35th anniversary of the founding of the Escapees RV Club, so it could have been that.  When she got back I brewed up some Jamaica Blue Mountain coffee (from Irene’s Beans in Milford, MI) and she opened her birthday present.  Linda now has her first “cowgirl” shirt!  She liked it so much that she made blueberry pancakes for breakfast with real, fresh blueberries and real Michigan maple syrup.  (If you are thinking that I should have prepared breakfast for her, let me state that in the past I would have, and could have, done this but she is the resident WFPB culinary expert, and I have basically stayed out of the kitchen, and out of her way, since we started down this path two years ago.)

We got a call from our son who was checking on our house.  Linda had asked him the day before to check our answering machine because it wouldn’t pick up when we called.  It turned out that we didn’t have a dial tone, but our Internet connection appeared to be OK.  He said there had been a lot of rain this past week, so that may be the reason.  Our phone and data service come over the same wire, so I’m not sure that is the problem.  We decided to wait a few days and see if it clears up.  If not we will have to contact AT&T.

We had more coffee at 9 AM at the WiFi Cafe and more conversation with Charles Martin.  We returned the defective Camco hose and got a replacement.  Their analysis was that the metal sleeve had not been swaged properly which is why the barbed fitting did not stay in.  While we were there we looked at the Camco Genturi genset exhaust stack.  This is an auxiliary exhaust stack that fits on the end of the generator tailpipe and carries the generator exhaust up past the roof line of the RV.  It’s made of 3” PVC in 4 foot sections, so it can be taken apart and stored.  A tailpipe extension curves up into the base of the 3” pipe with room to draw in cooler air around it and creating a Venturi effect, thus the name of the product.  This is a fairly easily duplicated design; the main reason to buy it is that you don’t have to source all the materials and make it yourself.  The vertical pipe has to be supported somehow, and suction cups are one of the options.  The vendor suggested getting large ones from Harbor Freight that are normally used for handling windshields and other large pieces of glass.  If/when I build one of these, I would like to be able to hook it onto the gutter rail where the roof starts, but the large suction cups are an interesting idea, although I am not too keen on that idea with the new paint on the coach.  Our Aqua-Hot exhaust exits out under the driver side of the coach right next to the generator exhaust, and I have considered building a double stack that hooks to both of these.  In both cases, however, I have to be careful not to restrict the exhaust flow and create back pressure.

We walked through the vendor area again and talked to Sean at WiFi Ranger about the factory default reset we got when we turned the power off and back on.  I also bought a roof mounting bracket for our WiFi Ranger Mobile.  Linda bought a silicone cooking sheet for use in the microwave from RV SpaceSavers.  We stopped and talked briefly to Nick & Terry Russell of The Gypsy Journal and gave Nick a copy of the February 2013 issue of Bus Conversion Magazine.  Until a few years ago, Nick and Terry lived in an MCI bus that Terry had converted.  (Nick is famous for not knowing how to use tools.)  We talked to a vendor who provides mobile black/grey tank cleaning service, but deferred signing up.  We also chatted with a satellite TV vendor who felt strongly that Direct TV was a far superior choice to Dish Network, especially if we were also going to use it at home.  She confirmed that Moto-Sat had gone out of business and that RF Mogul was started by former Moto-Sat employees.  We discussed the possibility of using a fully-automatic open style multiple-satellite dish on a tripod or other mount rather than having it attached to the roof.  She seemed skeptical, but did not see any fundamental reason that it wouldn’t work.  (In fact we have seen a lot of open style satellite TV dishes mounted on tripods or sitting on the ground, although most of them are manual dishes, not automatic.)

After our jaunt through the vendor area, we visited “The Row” to get our “bingo” sheet filled in but ended up talking to many of the chapter and C-BOF representatives.  We finally met Steven Gullette from the HFH BOF, with whom we had exchanged many e-mails in the last few months.  He will be one of the co-leaders on the build in Sheridan in a couple of weeks.  We chatted with Lou Petkus, K9LU, and signed up for the newly formed SKP Photographers BOF (no charge).  We also talked to the Elks BOF and found out that we can join the Gillette lodge while attending Escapade, so we took some information and an application form.  The initiation is Friday evening.

We got back to the coach around 12:45 PM and grabbed a quick lunch before running some errands.  We went back to the Boot Barn to exchange Linda’s new shirt for a different size, and had to join their “loyalty program” in order to do the exchange.  The manager had to approve the exchange and was a bit surly.  We will not be shopping there ever again.  We also mailed an anniversary card to our son & daughter-in-law.  Linda received a birthday call from her sister and a video birthday greeting from our son, daughter-in-law, and granddaughter.  In many respects, RV life is just like regular life.

We attended the opening / welcome ceremony at 3 PM and were delighted to see and hear from Kay Peterson, SKP #1.  Dinner was leftover risotto with the rest of the Lawrence Elk black currant wine from Prairie Berry Winery, and both were excellent.  I was sorry that they were both gone, but there’s more where they came from.

We went over to the Wyoming Center at 7 PM for the Door prize drawings followed by the Rivoli Review for the evening entertainment.  They do a good show, with lots of energy and humor, although the patriotism was laid on fairly thick, and there were moments that were just plain jingoistic and inappropriate.  Although many of the attendees were enthusiastic about their show, there were plenty of folks sitting on their hands who were clearly not so pleased.