Tag Archives: Icom IC-2820H dual band radio

2015/10/11 (N) Now Heat This

Leave a reply

I guess we were tired after having Madeline at our house for 23 hours.  We slept in until after 8 AM and it was going on 9 by the time the coffee was brewed and we sat down to breakfast.  I really needed to attend to some paperwork for our FMCA Freethinkers chapter but was also eager to get deeper into the manual for the new Sony a99v camera.  I installed the PDF manual onto my laptop yesterday from the CD-ROM that came with the camera and then e-mailed it go my iPad2 so I could read it conveniently.

HL – Jasper, our mackerel tabby male cat, allows himself to be photographed on the living room floor. You wouldn’t know it from this photo, but he is actually a very sweet animal ad a real joy to have in our household.

Jasper, our mackerel tabby male cat, allows himself to be photographed on the living room floor. You wouldn’t know it from this photo, but he is actually a very sweet animal ad a real joy to have in our household.

Other than the time, date, and date format I have not adjusted any of the default settings or experimented with the camera’s many functions.  I have taken a few photos just to make sure it works but I do not want to start generating a lot of image files until I have made decisions about basic things like folder naming conventions and “normal” shooting modes and settings.  I did, however, enable a “rule of thirds” grid on the viewfinder screen.

Linda worked on our personal accounting and then prepared the treasurer’s report for our amateur radio club meeting this evening.  I took a break from reading the camera manual to research the availability of some accessories on the B&H Photo website.

The electric cable release for my old Minolta 9000 SLR film cameras works with the a100 so it may work with the a99v too.  If not, newer remotes are available, including wireless ones that are not too expensive.  I found the angle finder but it is discontinued.  With the adjustable LCD screen in the back of the camera the angle finder isn’t really necessary but would have been a nice accessory just the same.  I am also looking for a case and/or a photographer’s vest and/or a chest harness/holder.  The a99v with the vertical grip and a telephoto lens is a substantial piece of equipment, both in size and weight, and the chest harness/holder would support that weight more comfortably and securely than a neck strap.  I found several interesting things but not exactly what I had in mind.

By the time Linda finished her accounting tasks I was dressed to work.  First up was the hydronic heating system in our bus.  I got four pieces of 2×4, each about four feet long, and two pieces of 2×12 about 16″ long.  I put a pair of 2x4s under each desk base and inserted one of the 2x12s between the 2x4s and the base.  That raised each base three inches which was enough to ensure that the heater hoses attached to the lower fitting on each heat exchanger sloped slightly downward back towards the main unit.

The hose that connects the two heat exchangers together in series is attached to the top fitting on each one.  Half way between the exchangers is a T with the bull branch pointing up.  A ball valve with a waste port is attached to the branch.  While Linda held the valve higher than anything else in the system I opened the valve and used a small funnel to slowly pour in antifreeze.  When the lines and exchangers appeared to be full I closed the valve, turned on the thermostat for that loop, and turned it up to cause the circulating pump to come on.  I let the pump run for a few minutes and then turned it off.  Again with Linda elevating the valve I opened it and added a little more antifreeze.  I ran the pump again for a few minutes and shut it off.  This time the coolant was still right at the valve so I shut it and Linda set it down.

It was now time for “the big test.”  In order to be able to see if there were any leaks, and catch any coolant if there were, we put heavy duty paper shop towels under all six of the clamped connections where the heater hose went over 3/4″ copper as well as under the soldered joints of the T and valve.  I opened the water bay on the passenger side, where the Aqua-Hot is installed, checked the coolant level in the expansion tank, and made sure the paper cup was positioned under the overflow tube.  The level of coolant in the expansion tank was just above Minimum Cold.  With everything in order I turned on the Aqua-Hot burner and then turned the front zone thermostat back on.  I also turned on the thermostats for the bathroom and bedroom zones to cause coolant to circulate through those loops.

There are quite a few gallons of antifreeze in the hydronic heating system and even on a mild day such as today (temperature just above 70 degrees F) it takes a while to heat it up to the 170 degrees required to shut off the diesel burner.  I kept checking the hoses by the fill valve and the expansion tank.  When the hoses were warm and the level of the coolant had risen 1/2″ in the expansion tank I cracked open the waste port on the fill valve.  I got a tiny, short hiss and then coolant came out so I quickly closed it.  It appeared that our method for filling the system and bleeding the air out had worked as intended, and there was no evidence of any leaks.

I left the Aqua-Hot on until it shut off on its own.  The expansion tank was near full at this point and I topped it up.  As the system cools down the coolant will contract in volume and some of the coolant in the expansion tank will be drawn back into the main chamber.  It’s important that there is more coolant in the expansion tank than the amount that will be drawn in or air will get drawn in instead.  I buttoned up the coach and turned to my next task.

I removed the chain from the new Poulan Pro 18” chain saw since I completely dulled it trying to cut through a tree root.  As long as the cover, chain, and bar were off I cleaned up the motor unit as best I could.  Oil impregnated sawdust is tenacious stuff.  I put the new chain on the bar and attached them to the motor, making sure the chain was oriented correctly.  I topped up the bar and chain oil reservoir and topped off the fuel tank.

It took several trips to get the 7′ step ladder, pole saw, compound lopping shears, hand tree saw, and chain saw back to the apple tree.  I noticed yesterday that one of the main branches coming off the trunk about 3′ above the ground was dead.  The bark was missing and the smaller limbs were brittle.  The bark looked like it might have been chewed away by deer but I wasn’t sure.  All I knew is that it was dead.

I started with the pole saw and worked from the ladder to cut off the limbs that extended far up into the tree.  Once I had those detached and pulled out of the tree I started the chainsaw and used it to cut off the larger branches as I worked my way down towards the main trunk.  I gathered all of the smaller material into a pile and then gathered the larger pieces together.  I used the largest piece as a sawbuck to support the other pieces as I de-limbed them and cut them into four foot lengths.  I then cut up a large pine tree limb that has been sitting on the ground under the apple tree for quite a while.  I used the pole saw and loppers to trim off a few other small branches and the carried all of the tools back to the garage.  It was 3 PM by the time I got everything put away.  I was done with physical work for the day so I got a much needed shower and got dressed appropriately for our meeting later.

The apple tree is still in need of serious pruning if it us to survive and bear useful fruit.  It particular it needs to be “topped.”  It is too tall overall, especially in the center, and much of the fruit is growing up there where the sunlight is good but it cannot be reached either by us or by the deer.  We have been putting deadwood in the firepit all summer and, more recently, on the disposal pile, where it goes mostly depending on what part of the yard the tree was in when it fell or got cut down.  In the case of the apple tree it occurred to me that Applewood is prized for the smoke it produces when grilling so I may stack it up, let it continue to dry, and perhaps rent a chipper next year to turn it into something useful.

We had breakfast later than usual, and skipped lunch, so we ate dinner at 4:30 PM, which was earlier than usual.  Dinner was lentil loaf, baked potato, and steamed broccoli, a simple but healthy and tasty meal.

On Friday I exchanged a few text messages with Josh at Coach Supply Direct regarding our desktop and table.  The net result was that his schedule had changed and he was not going to be able to get our desktop and table from Countertops Plus in Shipshewana, Indiana and deliver them to us for over a week, at the earliest.  He had also planned to bring some extra clips for our MCD shades and look at the wiring on the front passenger seat 6-way power base.  Those last two items were not critical but we are ready to install the desk once we have the desktop and cannot afford to wait another week and a half to get it.  I called and left a message for Ferman Miller to let him know I would be driving down tomorrow morning to pick them up.  I then worked on this post until 5:30 PM when I stopped to reinstall the antenna, radio, and GPS in my car.

We left at 5:45 PM for our monthly SLAARC meeting and shortly thereafter heard Mike (W8XH) on the South Lyon 2m repeater.  I replied to his call and we had a QSO that lasted almost all the way to our meeting site, where we arrived within a minute of one another.

We socialized with fellow club members from 6:30 PM until Harvey (AC8NO) called the business meeting to order just after 7 PM.  The club secretary was absent so I took the minutes.  The business meeting lasted less than 10 minutes and was followed by a presentation on APRS by Eric (K8ERS).  I gave Mike (W8XH) a check for the Icom IC-2820H dual band radio that has been in my car since early summer.

As I said at the beginning, I really needed to update the FMCA Freethinkers roster and financial reports and make them available this evening.  Well, sometimes things don’t happen just because they need too.  Today was just too perfect a day to waste it sitting inside at a computer and by the time we got home from our meeting I did not feel like starting this task.  I will try to make this a priority tomorrow evening, but each day is an adventure and I have to be agile in dealing with the myriad tasks that lay before me, including ones that appear unexpectedly.

 

2015/07/11 (S) Impactful Tools

Leave a reply

We had a small crowd for our SLAARC breakfast this morning but good conversation.  After breakfast we drove to Chuck’s house and picked up the manual impact screwdriver.  Barb was up in the thumb visiting her brother-in-law who recently lost his wife (Barb’s sister).  We lingered for a while and then left for home, stopping for gas on the way.

Back at the house I started a load of laundry and then went to work on the stop block screws.  Linda helped steady the ladder and pass tools and parts back and forth.  I got three of the four screws out of the two stop blocks but the head stripped on the forth one so I was only able to remove the aft stop block.  I tried different bits and even tried drilling a small hole in the center of the head to allow the bits to go in farther but it did not work.  The next approach will be a screw extractor, but first I have to go buy one.

We had soy yogurt for lunch with red grapes and I had a few pretzels with roasted red pepper hummus.  I kept trying to get to the basement to work on the desk design but kept getting detoured.  Once I finally reached my office I found that the mouse trap that I had placed under one of my desks was out in front of it.  The food was gone but there was no mouse, only mouse poop.  I realized that the trap was upside down which allowed the door to swing open.  Our best guess is that a mouse was trapped and the cats pulled the trap out from under the desk and accidentally turned it over while pawing at it trying to get the mouse.  Since there was no sign of a mouse having been caught by one of the cats my best guess is that it escaped, for now.

I checked e-mails and found the one with the credentials and instructions for the QTH.com web-hosting of SLAARC.com so I shared those with the other members of the SLAARC website team and then logged in to check out the log file I had created the other day as a test.

I decided to reconnect the Yaesu FTM-400 radio to the Diamond X-50 antenna on the tower so I could monitor the Novi and South Lyon repeaters while I worked in my office.  I had quite a mess on the ham shack desks and decided the best way to deal with it was to install Mike’s Icom IC-2820H in my car in place of our Icom V-8000 2m rig.  At least that would get the 2820 off the desk.  I checked that the mounting brackets and they were identical so I removed the V-8000 but left the mounting bracket installed in the car.

Mike had modified the power cord on his radio by cutting off the T-connector and replacing it with Andersen PowerPoles so I had to modify the power cable in my car to match as I could not modify Mike’s radio.  I removed the fuse from the positive (+12VDC) lead and then cut off the T-connector, leaving about 6″ of wire so I can add PowerPoles and make it into an adapter cable.  I brought my Hakko soldering station up from the basement, set it up on the floor behind the center console, ran an extension cord from the garage, and used it to solder PowerPole contacts to the two wires.  I then inserted them into the black/red housing pair and snapped them in place.

I mounted the IC-2820H, connected the power cable and connected the coax from the antenna.  I reinstalled the fuse in the positive lead, started the engine, and turned the radio on.  A couple of hams were chatting on the Novi repeater, one of whom I knew (Jim, KB8TAV).  When they finished I gave Jim a call and he came back to me, the first time I have been able to use the Novi 440 repeater from my car.  Jim signed off and I switched to the South Lyon 2m repeater and gave a general call.  Steve (N8AR) came back to me and we had a short QSO that verified the radio/antenna was also working on 2m.  As we were wrapping up Linda started fixing dinner.

Linda fixed a simple salad and Dr. Praeger’s vegan hamburgers with Daiya non-dairy cheese.  These patties were also squishy rather than firm and, like the ones at Zingerman’s Roadhouse the other night, where not very satisfying.  They tasted OK, and we ate them because we are not inclined to waste food, but there is a lot more to what makes food satisfying than just taste.  Sight, smell, and texture (mouth feel) are also important.

Linda had several TXT messages from Mara letting us know that she would be arriving tomorrow sometime before 2 PM as she wanted to watch the Wimbledon finals at that time.  Linda and I considered how best to accommodate Mara’s motorhome and finally decided to just pull our bus straight forward until the nose was at the edge of the concrete driveway.  That created more than enough space on the level part of the pull-through driveway for her to park and plug in to our 50 amp service.  The only loads we have in the bus at the moment are battery chargers so we used our 15 amp cord to plug it into a garage outlet.  Since I had to start it to move I switched it to high idle once I had it positioned, leveled it, turned on the OTR air-conditioning to put a load on the engine, and let it run for 30 minutes.

I returned to my office after dinner and work on the desk design for a while but by this point I was tired and not really in the mood.  The last time I updated the BCM page on our website was after the February 2015 issue came out.  I have had articles in the March, April, and May issues and will have articles in the June and July issues.  I captured the covers from March, April, and May and updated the page.

I exchanged e-mails with several people and spent some time looking at dual and triple monitor stands on EBay.  We rarely use EBay and the site made me change our password before it would let me log in.  There was a large selection of products but none of them were exactly what I am looking for.  There wasn’t any rush so I decided to revisit this tomorrow.

 

2015/07/02 (R) 100,000 Radios

Leave a reply

We were tired and did not get up until almost 8 AM.  Linda prepared a tofu scramble for breakfast, as we were almost out of her homemade granola, and served it with some cinnamon raisin toast and fresh grapefruit.  It’s the closest thing we eat to scrambled eggs and she serves it as an occasional change of pace from our standard granola breakfast.

I had my annual appointment with my dermatologist this morning at 11 AM.  I needed to pick up a cable from Scott (AC8IL) at Adams Electronics, which was on my way to the Henry Ford Health System (HFHS) clinic, so I left the house a little after 9:30 AM.  The drive was fine initially and I had a nice QSO (chat) with Steve (N8AR) on the South Lyon 2m repeater.  As I was approaching Wixom Road, however, all lanes of eastbound I-96 were stopped.  I was able to exit at Wixom Road and headed north a short distance to West Road which I took east over to Beck Road where Scotty’s business is located a little north of West Road.  I had a brief chat with Scott about the antennas on my tower before I left.

Two miles north of Scott’s shop I turned east on Maple Road (15 Mile Road).  The HFHS has many clinics around the greater Metro Detroit area and my dermatologist is located at the intersection of Maple and Farmington Roads in West Bloomfield.  That should have been an easy trip but there was construction on Maple Road that had the road down to one lane with flaggers.  There were signs advising motorists to seek other routes but I did not heed the warning.  I patiently worked my way through and arrived for my appointment about seven minutes ahead of time.  Good thing I left as early as I did.

My exam was fairly routine and Dr. Nydorf wrote out a prescription for Doxycycline.  I will try taking it (again) three times a week and see if it helps.  I headed straight for home after my appointment but took a different route.  Once I was back at the house Linda went for a walk.  While she was walking I removed the license plate from her car, took the protective (anti-theft) cover off, and cleaned everything.  When it was dry I put the new registration sticker in the corner, reassembled the cover, and installed the plate back onto the car.  I then started working with the various pieces of the new Yaesu FTM-400DR/DE mobile radio.  When she got back from her walk she heated up a couple of tofu hotdogs for lunch.  These are such simple fare but so tasty (with mustard, onions, and relish) and so appropriate for a summertime lunch.  They are also a really easy lunch to get on the table.

After lunch Linda took her car to the Howell library to get some books and children’s DVDs and then stop at the Meijer’s supermarket to pick up a few grocery items for Madeline’s visit this weekend.  While she was running errands I assembled our new Diamond X-300NA antenna.  Once it was assembled it was over 10 feet long so I stored it by mounting it to the side of the tower.  I put it up as high as I could reach from the ground to get the three counterpoise (elevated ground plane) rods above eye level.  Moving it to the top of the tower as a replacement for the Diamond X-50NA will have to wait until next week or later.  The exact timing will depend on the weather, Mike’s (W8XH) availability, and whether I have acquired appropriate standoffs by then for the X-300 antenna and/or the cellular booster omnidirectional antenna.

With the antenna taken care of (for now) I disconnected the coaxial cable for the X-50 from the radio side of the lightning arrestor and positioned it so I could pull it back into the sump pump room.  From there I fed it into the ham shack, disconnected it from the radio, and coiled it up.  I uncoiled the new 20′ LMR-400 cable with the N-male connector end positioned so I could feed it through the corner of the ceiling in the ham shack (by the ground wire) and into the sump pump room.  From there I fed it through one of the 2″ conduits into the cable entry box.  Back outside I shaped the cable (LMR-400 cable is double shielded and stiff) and connected it to the radio side of the Morgan VHF/UHF lightning arrestor and closed the lid on the box.

Back in the ham shack I attached the PL-259 connector to the SO-239 socket on the back of the Icom IC-7000 GoBox.  I could have gotten away with a 16′ cable but the 20′ length gives me more flexibility with respect to equipment placement.  I turned on the IC-7000 but did not hear anyone on either the South Lyon 2m or the Novi 70cm repeaters so I turned it off.

I disconnected Mike’s Icom IC-2820H and set it aside to make space for the new Yaesu FTM-400DR/DE dual band mobile transceiver.  I moved the new coax to the new radio, powered it up, spent a few minutes configuring some basic things, and then listened to the South Lyon and Novi repeaters.  I tried calling them but was not triggering them so I knew the PL Tone was not set correctly.  I called Mike for assistance and left him a voice message.

Linda was back by this time so she came down to see the new radio.  We then went out to the bus to make our final decisions about upholstery fabric and window shade materials.  In the end we chose the Lambright Notion Linen fabric for all four chairs and the MCD B50 material for the dark out shades.  We brought all the samples back in the house and I e-mailed our choices to Josh at Coach Supply Direct.

I had an e-mail from Scott Neader (KA9FOX) at QTH.com requesting an admin login for the SLAARC WordPress website so I set that up and e-mailed him back.  I had the new radio on and was listening to a conversation on the Novi repeater.  It had just concluded when Mike returned my call.  He walked me through how to set up the PL Tone and Squelch Tone for both of the repeaters on the FTM-400.  We were then able to verify that the radio was working on both bands.

For dinner Linda made a salad and pan-grilled tofu with caramelized onions and barbecue sauce which she served open-faced on hamburger buns.  We had watermelon for dessert, which we have been doing a lot this summer.  I did not care for watermelon as a child but it has become a favorite summertime treat.  I had dropped a small lock washer while mounting the new antenna to the tower earlier so I went to Lowe’s to get a replacement and some spares.  On the drive there I got a call from XPO Delivery Service letting me know that the new refrigerator for the bus would be delivered to Chuck’s shop in Novi tomorrow between 6 and 8 PM.

At Lowe’s I picked up some 6mm x 1.0 Nylok nuts in addition to the lock washers.  I also got some grass seed patching mix, a few more bags of decorative broken brick pieces, and a hummingbird feeder with a red reservoir so Linda can use sugar water without red food coloring.  When I got home the odometer on my car read 100000 so I took a picture of it with my phone.  I then spread the patching mix over the bare dirt I had used to fill a hole and troughs left by the installation of the natural gas line to our house last September.  The rest of the evening Linda read and I worked on completing drafts of blog posts.

 

 

2015/06/29 (M) Website On The Air

Leave a reply

Linda was up at 5:55 AM this morning and left for the bakery at 6:15.  Experience has shown that this is usually early enough to get ahead of the morning rush hour traffic inbound to the Detroit metro area from the northwest.

I got up about an hour later, had granola for breakfast, and enjoyed my morning coffee (Sweet Seattle Dreams half-caff blend from Teeko’s) and then made a run to Lowe’s to purchase a couple of copper ground lugs and 5 feet of #10 green ground wire.  Back home I tried to use one of the ground lugs to terminate the ground wire from the cable entry box (CEB) to the 36″ ground bar on the wall behind the ham radio desks but it’s shape prevented the wing nut from going onto the stud.

I planned to use the other lug to attach one end of the #10 wire to the ground bar and put a male spade lug on the other end to mate with the connector on the Go Box ground pigtail, but that clearly was not going to work.  I dressed the ground wire and (temporary) coax in the ham shack and put the ceiling tile back in place.  I then started cleaning up the living room and small bedroom per Linda’s request before she left this morning.  Some of our (my) projects have a way of expanding throughout the whole house.  I had hoped to also pick up the coax cables spread out in the recreation room, and at least start to straighten up the ham shack/office, putting materials away and moving tools to the garage.

At 10 AM I made a few phone calls.  The first was to Rick Short at ISRI USA regarding the 6860 bus driver’s seat and a possible visit tomorrow morning.  I got his voice mail (again) and never got a return call (again) so I gave up on getting any assistance from him or from ISRI USA.  I called Linda to make sure she did not have any commitments on Wednesday and then called Josh at Coach Supply Direct to set up a visit to his shop for Wednesday late morning.  Linda and I plan to finalize our Flexsteel furniture order and give Josh the deposit during that visit.  Next I called Scott Adams, AC8IL, at Adams Electronics and ordered a 20 foot length of LMR-400 with an N-male connector on one end and a PL-259 connector on the other end.  Scotty and I also chatted briefly about tower bases.

I e-mailed Scott Neader at QST.com regarding the transfer of the SLAARC domain name and website from GoDaddy to QST.com and got a reply back right away with an outline of the steps I needed to follow.  First on the list was creating an account for our ham radio club through his billing system.  I took care of that and e-mailed him back.

Keith Kish, from Kish Lawn, care showed up around 11 AM to cut the grass.  When he was done I headed back to Lowe’s to look for an alternate ground clamp and pulley support for the tower but did not find anything suitable.  So as not to have it be a wasted trip I bought three more bags of broken brick pieces to use around the tower base and cable entry box.

I spent some time looking at the Yaesu FTM-400DR/DE on several different ham radio equipment vendor websites.  Yaesu is offering a $100 rebate on this 2m/440 mobile radio through tomorrow.  All of the distributors are selling it for the same price, $599.95 and the rebate brings it down to $499.95, so if I buy one it will come down to who has them in stock and is offering free shipping.

Linda got home from the bakery around 3 PM, earlier than I expected and nice for her.  She went for a walk while I continued to fuss with ham radio and website stuff.

For dinner Linda made a white beans and mustard greens dish.  We eat a lot of lettuce, kale, and spinach, both raw and cooked into dishes, but only occasionally have collard greens or mustard greens.  Mustard greens have a very strong, bitter flavor and I liked them more than Linda did.  I think they are an acquired taste and may be more suitable as an accent ingredient rather than a main one.

After dinner I checked my e-mail and had a reply from Scott at QTH.com.  The QTH SLAARC account invoice was ready so I paid it using a personal credit card.  I then moved the coax from our Icom IC-7000 to Mike’s Icom IC-2820H and turned it on.  Mike was on the South Lyon repeater discussing the Field Day event with Steve (N8AR) and Bruce (W8RA).  Paul (N8BHT) was able to join the conversation but I was not successful breaking in so I just listened.  It was an indication that my power into the repeater was probably still marginal but a good reminder that ham radio conversations are very public.

When they were done I called for Mike and he came back.  We had a good QSO (chat) about the Yaesu FTM-400.  Jim (N8KUE) joined in for a while.  After Jim dropped off we tested my ability to transmit to, and receive from, both the South Lyon 2m and Novi 70cm repeaters.  The added power of the IC-2820H over my IC-7000 (50W vs 35W in the 70cm band) combined with the lower signal loss of the better coax made just enough difference that I could hold the Novi repeater when transmitting although my signal was still on top of a lot of noise coming back out of the repeater.

Linda wanted to watch an episode of Scorpion, followed by NCIS Los Angeles, after which I caught an episode of Two and a Half Men and then turned off the TV.  I will have to make a decision about the Yaesu FTM-400 in the morning.

 

2015/06/27 (S) ARRL Field Day

Leave a reply

At 5 AM I was vaguely aware of the sound of rain.  The cats were chasing each other through the house so I got up to make sure nothing was amiss, such as another mouse.  They were just having a bout of morning friskiness.  I added a little food up to their bowls, which drew their attention, and went back to bed.

My Amateur Radio vanity license plate. There were a LOT of these in the parking lot at the SLAARC Field Day site.

My Amateur Radio vanity license plate. There were a LOT of these in the parking lot at the SLAARC Field Day site.

I finally woke up and got up about 8:15 AM and got dressed in a suitable manner for today’s American Radio Relay League (ARRL) Field Day event.  The temperature was in the mid-50s, overcast and raining with blustery winds; not exactly the nice summer day we were all hoping for.  Some of the members of the South Lyon Area Amateur Radio Club (SLAARC) were gathering for breakfast at the usual place (Senate Coney Island) at the usual time (8 AM) but we obviously did not join them today.

I went to my office to retrieve my Sony DSLR and decided to turn on our Icom IC-7000 ham radio.  I had it tuned to the SLAARC (K8VJ) repeater in South Lyon when Keith, KD8YYJ, announced his presence.  He was driving from the west side of Howell to Wixom and seeing what repeaters he could hit.  We chatted for 10 to 15 minutes and I invited him to stop by the SLAARC Field Day site at the South Lyon Township James F. Atchison Memorial Park.

I worked all day yesterday as part of the SLAARC Field Day setup crew.  There was more setup to do starting at 9 AM this morning but the setup mostly involved radios, computers, Wi-Fi networking, and power.  I was not in any humor to rush off into the clammy weather conditions, and Linda was up by this point, so we had breakfast.  She found some Silk brand ‘yogurt’ at Meijer’s last week so we had that.  It was OK.  It is a creamy style yogurt, which is not my preference, but it was tasty enough.  Bananas, cinnamon raisin bread, and juice rounded out the meal.  Linda even made the coffee.  I turned on the natural gas fireplace to ward off the chill in the living room where we lingered and enjoyed our morning brew.

The SLAARC Field Day operating stations use wirelessly networked computers (left) running N1MM Logger+ to record the contacts that are made. HF transceiver to the right.

The SLAARC Field Day operating stations use wirelessly networked computers (left) running N1MM Logger+ to record the contacts that are made. HF transceiver to the right.

I finally left for the Field Day site around 11 AM.  The operating event started at 2 PM but the first of four meals was lunch today at noon and I wanted to capture photos of the rest of the setup and the lunch event.  It was raining lightly when I arrived and continued to rain until I left at 2:15 PM.  In between arrival and departure I took some photos and helped out a little bit, but there were plenty of people there taking care of what needed to be done.

Mike (W8XH) brought his Icom IC-2820H dual band mobile radio and several lengths of 50 ohm coax and we transferred those to my car.  He then walked me through the various menus and functions his new Yaesu FTM-400DR/DE radio, a dual band (VHF/UHF) 50 Watt rig with digital voice capability and a color touch screen display.  A group of SLAARC members recently purchased a Yaesu DR-1X repeater that works with the new Yaesu digital voice and data modes in addition to the traditional FM mode and are testing it as a replacement for the current, and very old, K8VJ repeater.

Mike’s IC-2820H is available for $350 but the FTM-400DR has a $100 rebate through the end of June, bringing the price down to $500.  As much as I would like to have a VHF/UHF radio in my car I am looking at one of these radios to install in the cockpit of the bus so we can use it going down the road.  The long-term plan is to put the Icom IC-7000 HF/VHF/UHF radio in our towed vehicle and get the Hi-Q 80-6 antenna mounted and operational in addition to the Diamond SG-7900 VHF/UHF antenna that is already on the Honda Element.

For base station use I would like to get an Elecraft K3s or Flex SDR rig.  The K3s has become the rig of choice among the members of the SLAARC who are serious about working HF and contesting.  Either of those are radios that could be fairly easily moved from the house to the bus when we travel.  Antenna options in the bus could include running coax to the Hi-Q on the toad and/or a “flagpole” HF vertical that is mounted using the towbar receiver or a base stand that goes under one of the tires.  An antenna switch would allow the use of the VHF/UHF antenna that was already installed for the cockpit radio.  All of these “base station” options would obviously be for stationary use only.

[Photo 3 – HC]

The ARRL FIeld Day event showcases the ability of amateur radio operators to set up equipment in the field on short notice and keep it on the air for 24 hours, no matter what. The weather turned bad for the event. The portable generator is under the tent in the right foreground.

The ARRL FIeld Day event showcases the ability of amateur radio operators to set up equipment in the field on short notice and keep it on the air for 24 hours, no matter what. The weather turned bad for the event. The portable generator is under the tent in the right foreground.

I uncoiled the coax cables that Mike lent me to see how long they were.  There was a 5 foot piece that was too short for what I needed, and a piece that was approximately 40 feet, which was longer than I needed.  The third piece was at least as long as the 40 footer.  I “tagged” his coax with small white cable ties so I could identify them later and return them to him.

I did not want to mess around switching coax cables in the rain so I unboxed Mike’s Icom 2820 and got it set up to use with my existing antenna and transmission lines.  I spent a little time with the manual and then powered it up.  It was already configured from when Mike used it in his ham shack so I did not need to do any setup to use it.  I monitored both the South Lyon 2m and Novi 440 MHz repeaters and was able to “hear” both of them, although the South Lyon signal was much better (stronger, quieter, clearer) than the Novi.  A couple of SLAARC members were on the South Lyon repeater taking care of Field Day business.  I waited a suitable amount of time after they were done and called for Mike (W8XH) and he came back right away.

We repeated the testing we had done last night.  The performance with the 2m South Lyon repeater seemed to be much better but the performance on the 70cm Novi repeater was the same or worse with a fading component to the noise.  I think we were on the air 15 to 20 minutes.  Based on the test results from last night and this afternoon I think I have two separate issues that are probably interacting; the IC-7000 needs to be grounded and the 25 feet of coax from the cable entry box (CEB) to the radio (Go Box) needs to be shorter and much higher quality.  I need to install the ground bar on the wall behind the ham radio desks and then purchase a suitable length of ground wire and run it from the CEB to the copper ground bar.  I will also need to get a 15 foot length of 50 ohm LMR-400 coax from Scott (AC8IL) with an N-male connector on one end and a PL-259 connector on the other end.

Linda prepared our dinner at 5 PM.  She made corn-on-the-cob and “cowgirl steaks,” a new (to us) vegetable protein product she found at Meijer’s.  After dinner we drove back to the SLAARC Field Day site to socialize with club members at dinnertime.  The weather at our house was still rainy with light-to-moderate winds and occasional stronger gusts.  We arrived at the Field Day site to find a flurry of activity and strong, steady winds out of the north with continued sporadic rain.

Jim (KC8WMW) stays dry as he works the GOTA (Get On The Air) station in one of the tents.

Jim (KC8WMW) stays dry as he works the GOTA (Get On The Air) station in one of the tents.

The small red tent that was originally supposed to be the VHF tent was nowhere to be seen and at least eight people were engaged in trying to control and fold up the large canopy that the club purchased yesterday at Costco to serve as the combined VHF and GOTA tent.  We quickly learned that the small tent, which was not being used, had collapsed and the large tent, which was unoccupied but full of radios and computers, had come unstaked and blown over in the wind.  Those who were not helping with the equipment canopy were gathered in the food canopy.  I pitched in on the equipment canopy rescue and Linda took the camera and joined the folks in the food tent.

After gathering up all of the pieces of the canopy and getting them back in the trailer some of the team added extra ropes and stakes to the windward end of the food canopy and both the 20m and 40m tents.  Another part of the team, including me, got Marty’s (KB8JIU) satellite tracking equipment out of the screen room, which had been draped with solid plastic tarps to keep the rain out, and then took the room down, disassembled the legs, folded it up, and stuffed it in the trailer.  The red tent was stuffed under a picnic table that was in the screen room so I grabbed that and put it in the trailer.  The support pole for one end of our off-center-fed dipoles was bending over to the south more than we liked.  Steve, N8AR, tied a rope around the existing rope, which was inline with the antenna and being used to keep it taught.  He slid the second rope up the first one as far as he could get it to go and then pulled it out to the northwest (the antenna was oriented east-west with the tension rope running east off of the east end).  He pulled it out until the support pole was reasonably vertical and I staked it down.

The winds really howled out of the north driving the rain before them. This shelter (from Costco) did not survive along with another tent and a screen room.

The winds really howled out of the north driving the rain before them. This shelter (from Costco) did not survive along with another tent and a screen room.

So the bad news was that some of our Field Day setup had not survived the weather which had not even reached severe conditions.  The good news was that our generator was still producing power, all of our towers and antennas were intact and functional, we had our two key stations on the air, and our food canopy was full of people and hot food.  Not the Field Day everyone had hoped for, but a great opportunity for teamwork and camaraderie and a learning experience to be sure, even if it was not the kind of lesson we wanted to learn.

We left around 7:30 PM and went to the New Hudson Lowe’s, which was very close to our Field Day site, where I bought 18 feet of AWG 6 stranded copper wire with a green sheath.  As soon as the weather improves I plan to run this from the CEB to the ham shack and use it to connect the ground bar in the shack to the copper backplane (ground plane) in the CEB.  I will then connect the ground on our Go Box (Icom IC-7000) to the ground bar and see if it helps with my noise issue.

Back at the house Linda wanted to watch an episode of NCIS Los Angeles, which we can now do thanks to our new OTA TV antenna.  We then watched an episode of Christina Cooks, Christina Perillo’s vegan cooking show from a decade ago.  These are still relevant and useful episodes and we especially enjoy them having seen and met her and her husband Robert on our two Taste of Health Holistic Holiday at Sea vegan cruises.  Linda read and I wrote for a while before lights out and off to sleep.