Tag Archives: Honda Element

2016/01/11 (M) – 15 (F) Family and Friends

Leave a reply

2016/01/11 (M) Jack and Paula

Linda was up at 7:30 AM and read quietly.  I got up at 8:15 AM and made coffee.  We had granola for breakfast with fresh strawberries which finished the current batch of cereal.  Linda got another batch out of the freezer to thaw.  We have five batches remaining.

Linda was checking e-mail and noticed that we had been billed yesterday for almost $500 by iPage for web-hosting services.  I originally signed up with iPage in January 2013 for three years.  I transferred everything over to QTH in August 2013 but did not cancel the iPage account.  I did not realize that the account was set up for automatic renewal.  I logged in to see if I could close the account and cancel the transaction or initiate a refund but the website just gave me a number to call.  I did and finally got to talk to Scott in billing.  He was obviously a native English speaker and was able to take care of everything quickly and efficiently and provide a confirmation number.  If iPage’s technical/customer support had been that good I might never have switched to a different web-hosting service.  I am, none-the-less, very glad that three of the four websites I work with are on QTH.com‘s web-servers and wish that all four of them were.  The technical and customer support there is second-to-none.

Linda wanted to send another postcard to grand-daughter Madeline so I downloaded the photos I took yesterday and selected one of a heron to use.  I post-processed it at several different sizes and copied it to the NAS.  She needed it on her iPad, however, so I e-mailed it to her.  Even though our iPads (and phones) can connect to our secure Wi-Fi network they are not able to access the network resources such as the NAS and printer.  I really should take the time to figure out if there is a way to do that.

On the drive home last night the Honda Element started displaying a message to “Check Gas Cap.”  I pulled off the road and checked but it was on tight.  The message, however, did not clear.  When we got home Linda Googled the message and found several sites that indicated it was a periodic system check and would clear the next time around, assuming the cap was not, in fact, loose.  That could take days, however, depending on how much we drove the car.  The answer for most of this week will be “not much.”

Linda went for a late morning walk.  The Element needed fuel so I drove to the Shell station on FL-70 to fill up the tank.  Linda had walked to Winn-Dixie and was just returning as I was pulling out so she rode along to the filling station.  She ran into Claudine Elbisser at the produce market and found out that she and Paul were still at Jack and Paula Conrad’s place south of town.  Jack and Paula started the Arcadia Bussin Rally and ran it for the first 10 years before turning it over to Bill and Brenda Phelan.

Back at the coach Linda heated some Amy’s vegan chili for lunch.  She opened a new (sealed) pack of saltine crackers as we like to crumble them in our chili and have a few on the side with vegan butter spread.  They did not taste quite right but we were not sure just why.  They were not spoiled but it seemed as if they were slightly stale (not crisp) and the flavor was also “off.”  They were Publix branded and all of the grocery items we have ever gotten from there have been good quality but we decided to throw the crackers away.

A Green Heron at Myakka State Park, FL.

A Green Heron at Myakka State Park, FL.

We went for a walk after lunch during which Linda got a call from her sister-in-law, Mary.  They agreed that we might do something together tomorrow if Spence and Nancy had not made other plans for them.  It was a beautiful, sunny afternoon but cool with highs in the upper 60’s.  Rather than sit around the coach I called Jack to see if we could stop by for a visit.  He and Paula did not have anything specific going on so we drove to their place about 10 miles south of Arcadia.

When we arrived we were greeted by Jack and Paula but found out that Paul and Claudine had pulled out this morning, so we did not get to visit with them.  We then realized that when Claudine told Linda she had to run “because Paul was waiting for her at Walmart” he was waiting in the bus.  John and Lois Vickrey were there, however, and the six of us had a nice visit.  There were two other converted buses at the Conrad’s but the owners were not around.  We did not recognize their names but both coaches were at the Arcadia Rally 2016 and we would probably have recognized them on sight.

By 4:45 PM the sun was low in the sky and the temperature had dropped into the low 60’s.  We were getting cold so we excused ourselves and left.  We stopped at Walmart on the way back to our RV resort for a box of angel hair pasta and a box of Nabisco saltine crackers.  Back at our coach I closed the two roof vents and we closed all of the windows.  I checked e-mail and Linda started working on dinner.

She started with a nice salad of baby kale, scallions, olives, and pumpkin seeds dressed with balsamic vinaigrette.  The main course was angel hair pasta with a vegan mushroom cream sauce.  She used the Miatake mushrooms we bought yesterday at the Farmers Market in Punta Gorda.  It was outstanding and we really liked the taste and texture of the mushrooms, which were a new culinary experience for us.

We went for our usual after-dinner stroll around the resort and stopped by the activity building where lots of residents were playing bingo and smaller groups were playing cards and games.  In another building a dozen men were playing pool.  It was a beautiful clear night with the constellation Orion rising in the eastern sky.  Although the air temperature was crisp folks were out walking, just like us.

Back at our coach we settled in to watch our usual Monday night TV programs (CBS).  They were all re-runs, which we thought was odd, but we watched them anyway.  We were off to bed at 11 PM and straight away to sleep.  I turned on the electric heater pad and set it on 3.  Toasty.

2016/01/12 (T) Myakka River State Park (FL)

The overnight low temperature was 47 degrees F; not cold enough to warrant turning the heat on in the coach but cold enough to cool off the interior by morning.  We pulled up the blankets when we went to bed and I turned on the electric heater pad on my side of the bed; a more efficient use of energy than heating the whole coach.  As a bonus, the cooler the coach the less the refrigerator runs, although the new one is much more efficient than the old one.  When it gets cool enough in the coach Juniper (the cat) gets under the covers between us and puts her head between our pillows.  She is such a princess.

A pair of alligators in the Myakka River, Myakka SP, FL.

A pair of alligators in the Myakka River, Myakka SP, FL.

We finally got out of bed at 8:15 AM and slipped into out sweats.  I made coffee while Linda talked to Kathi at the bakery back in Michigan.  We doodled on our iPads while we drank our coffee and let the coach warm up.  By 9:30 it was 72 inside.  I turned off the heaters and we sat down to a breakfast of homemade granola with blueberries and bananas and a small glass of orange juice.  We doodled for another half hour after breakfast and then got dressed.  In preparation for meeting Linda’s brother, Ron, and his wife, Mary, at Myakka State Park at 11 AM Linda made a picnic lunch and I got the camera gear ready to go.

We had planned to be on the road by 10:30 AM but actually left at 10:39.  The 29 miles to the park entrance was not all 60 MPH, so we did not get to the visitor center until 11:20 AM.  Ron and Mary were already there waiting for us.  We looked at maps and discussed what we wanted to do.  Ron and Mary wanted to see alligators in the wild, so they had come to the right place.  The main park road crosses the Myakka River about a mile into the park from the entrance / visitor center with parking at both ends of the bridge.  We knew from our visit two years ago that this was an excellent place to see alligators, as well as a variety of birds and so it was again today.  After spending some time on the bridge we walked along the south/east bank of the river and found two more alligators sunning themselves on the opposite bank.

A little farther down the road was the parking area for the Canopy Walk and Nature Trail.  We climbed the tower, walked across the suspension bridge, and then climbed to observation deck at the top of the second tower.  The suspension bridge goes through the forest canopy about 35 feet in the air and affords a view of the forest that most of us rarely see.  At 76.1 feet AGL the observation level put us well above the top of the trees with a commanding 360 degree view of the park and beyond.  I shot a nine frame panorama from west through north to east.

By the time we got back to our cars we were all ready for lunch so we drove to the developed area on the south shore of Upper Myakka Lake.  This area has one of the two campgrounds, a boat ramp, air boat tour concession, restaurant, restrooms, picnic tables, and a trail that leads out to a platform where the lake flows out and becomes the river.  We found a picnic table in the sun near the shore and had our PB&J sandwiches, oranges, pretzels, and water.  After lunch we walked out to the platform and were rewarded with more views of wildlife.

Ron, Linda, & Mary atop the 76.1 foot observation tower, Myakka SP, FL.

Ron, Linda, & Mary atop the 76.1 foot observation tower, Myakka SP, FL.

Our next stop was the “Birdwalk,” an elevated boardwalk near the northeast corner of the lake that goes out into an open harsh and gets people close to the shore.  There was lots of wildlife out there but most of it was some distance away.  A sign indicated that the donation box was to raise money to build an observation tower at end of the boardwalk above the existing viewing platform.

Our final stop for the day was the parking area for a trailhead in the northeast corner of the park.  The main trail led to primitive campsites as much as 10 miles away.  We did a loop of about 2.5 miles (by my estimate).  Although the entire trail (park) was level terrain the footing was rough or soggy in places.  Portions of our hike were through the forest and the rest was through prairie.  It was our most vigorous hike of the day and I did not take any photos even though I carried the camera along.

By the time we got back to our cars it was 4:45 PM.  The sun was low in the sky and the temperature had dropped.  We discussed our plans for Thursday and then headed our separate ways.  We had just left the park entrance and headed east on FL-72 when I spotted a group of 6 to 8 feral hogs on the north side of the road by a stream about 100 feet from the road.  Linda did not spot them in time so I turned around and went back.  As I slowed down they took off but Linda got to see them.  I turned around again and headed towards Arcadia.  Less than a mile down the road I saw four more in the ditch just off the north side of road.  They were very large adult animals.

We were back at our coach by 6 PM and had left over Asian salad for dinner.   It had been a slightly more physical day than normal so after dinner we settled in to watch our Tuesday evening TV programs on CBS.

2016/01/13 (W) Coffee Clutch

Today was our second Wednesday at Big Tree RV Resort.  The only significance to that factoid is that Wednesday morning is the weekly resort coffee.  As new arrivals in the resort we received a coupon for free coffee but forgot to go last week so we made a point of getting up and going this morning.  The coffee starts at 8 AM but we had been “advised” by folks to arrive early if we wanted a seat.  We got there around 7:50 AM and the place was packed.  We got in line to get our coffee and found out that today’s gathering was sponsored by an insurance agency and was free of charge. We found seats and made the acquaintance of the people sitting near us.

Ron, Mary and Me atop the 76.1 foot observation tower, Myakka SP, FL. (Photo by Linda)

Ron, Mary and Me atop the 76.1 foot observation tower, Myakka SP, FL. (Photo by Linda)

This was not a coffee clutch where folks stand around, mingle, and chat.  There are somewhere between 700 and 800 people in this park and I estimated that at least 400 of them were present at the coffee.  Everyone was seated on both sides of long tables for the entire duration of the coffee, which lasted until 9:15 AM.  It was very organized and consisted of introductions, lots of announcements, lots of door prizes, and a 50/50 drawing.  For the seasonal and permanent residents the information is probably useful, but it was not that interesting or useful to us.  We might go one more time just to take advantage of our free coffee coupon but the nature of the gathering won’t afford us any opportunity to meet people and talk to them over coffee so we probably won’t make a priority of going.

Today was laundry day for us.  Linda needed a few things from Winn-Dixie, including a few Powerball lottery tickets, and walked down to get them.  I gathered up the laundry, sorted it by color and temperature into three batches, and drove over to the laundry room in the activity building.  The washing machines only took about 25 minutes so I stuck around until they were done.  After getting those loads into dryers I went back and got the bedding, returned to the laundry room, and put it in a washing machine.  I took my iPad with me but ended up in a conversation with a few folks.  By the time I was done with the laundry and back at our coach it was 2 PM.

A flock of birds takes flight at the north end of Upper Myakka Lake, Myakka SP, FL.

A flock of birds takes flight at the north end of Upper Myakka Lake, Myakka SP, FL.

I took a long a long nap during which Linda went for a long walk, prepared ingredients for tomorrow’s lunch, and worked on her counted cross-stitch project.  I finally got up just in time for dinner.  After dinner we watched a fascinating documentary titled “Autism in Love” as a result of which we did not watch Nature.  We did, however, watch NOVA. It was also a fascinating program exploring new discoveries and understandings about the role and relationship of minerals in the origin and evolution of life on earth.

I watched some of the evening news on channel 11-1 and also checked the weather on channel 11-2.  A strong low pressure system was moving east from New Orleans across the Florida panhandle with strong storms coming ashore in that area.  A long, comma-shaped cold front extended from the low far down into the Gulf and was advancing on the peninsula.  It was forecast to come ashore starting north of Cedar Key after midnight and then progressively affect all of the shore communities south to Marco Island with strong thunderstorms along the front and a low possibility that some of them might become severe.  Rain, possibly heavy, was due in Arcadia starting around 4 AM and getting heavy by 5 AM.  Knowing this obviously doesn’t change whatever is going to happen, but knowing what is expected allows us configure the coach properly and to be prepared and react appropriately to events as they unfold if needed.

2016/02/14 (R) Ron and Mary

We were up by 7:30 AM this morning, had showers, got dressed, and had breakfast.  Linda finished food preparations for lunch today and then straightened up the inside of the coach while I dumped the holding tanks and filled the fresh water tank.

I was outside a little later in the morning and learned from a neighbor that the sewer line that services row K (where we are parked) had developed a blockage and sewage had “backed up into a couple of rigs.”  No one, however, was able/willing to be more specific than that.  A plumber was called and I chatted with him briefly when he arrived.  He confirmed that the sewer line ran from our end of row K south towards the front of the park by Hwy 70.  He determined quickly that there was indeed a blockage and I learned from him later that it extended along a considerable length of the sewer pipe.  This was not the first time he was called to deal with this and was able to get the drain line opened up.

Piecing together the available information I figured it was entirely possible that the sewage that backed up was from our tanks but that the blockage was not something we caused.  Linda, however, was of the opinion that the plumber had been summoned before I dumped.  Regardless, I’m sure it was unpleasant for those who were affected and I hope we do not have a repeat of this situation while we are here.  While in no way our fault, we would hate to have contributed to the situation in any way, however inadvertently.

My reasoning was that we are the second rig from the far end of the drain line and the tops of our waste tanks are almost 4 to 5 feet above ground level.  The tanks are large and if they were near full would release a considerable volume of effluent with a significant head pressure.  If the drain line was mostly constricted (reducing its  available volume), and the blockage was not very far down stream (also reducing its available volume), the weight of the contents of our waste tanks could cause the drain line to quickly fill and then force the effluent up through any available path, such as another rig’s dump hose.  This would continue until the levels reached equilibrium.

In a trailer with its floor not that far off the ground sewage could, hypothetically, back up into waste tank(s) and then into the toilet and/or sinks. None of that would happen, of course, unless the dump valves on the other RV(s) had been left open.  We have always been told that leaving the dump valves open on an RV is a very bad idea but the reason is that getting a good, thorough, dump requires a nearly full tank.  Today’s events have given us additional reason to keep the valves closed except to dump.

Now that’s what I’m talking about! We have got to get one of these. A 4-wheel drive, Sprinter-based Class B conversion from Sportsmobile as seen at the Tampa RV Supershow, Tampa State Fairgrounds, Tampa, FL.

Now that’s what I’m talking about! We have got to get one of these. A 4-wheel drive, Sprinter-based Class B conversion from Sportsmobile as seen at the Tampa RV Supershow, Tampa State Fairgrounds, Tampa, FL.

Ron and Mary arrived a little after 11 AM.  We gave them a tour of the interior remodeling work we have done and then sat and visited.  Eventually we were hungry and spread the tablecloth on the outside picnic table and had lunch out there.

After lunch Ron drove us to Joshua Citrus a couple of miles south of our resort where we bought a variety of citrus fruit.  We then drove to downtown, parked, and walked around poking our heads into some of the antique shops.  Mary was looking for a pair of clear glass lamp chimneys with a 2″ diameter base.  The closest she came was a pair with a 2-1/4″ base.  Apparently 3” diameter bases are common, 2” diameter bases, not so much.

We returned to the coach for a while and then took two cars and went to El Pirata for dinner.  It was our first time there although friends had told us it was OK and it was the #4 rated restaurant in Arcadia.  Linda did not care for her margarita and also did not care for the veggie fajitas or any of the sides that came with the dish.  I had Dos Equis Amber in a bottle, so it was fine.  I thought the food was OK; not outstanding but not disagreeable, so perhaps she just wasn’t in the mood for Mexican food tonight.

The restaurant wasn’t full so we lingered and chatted for quite a while but eventually it was time to leave.  We were only a few minutes from home but Ron and Mary had an hour’s drive to get back to Spence and Nancy’s place.  Back at our coach we settled in to watch our usual Thursday evening CBS TV programs and then headed off to bed as we planned an early departure tomorrow morning to get to the Tampa RV Supershow.

2016/01/15 (F) Tampa RV Supershow

As forecast, the rain started around 4 AM and by 5 AM was fairly heavy.  I was not, however, aware of any lightning, thunder, or strong winds.  We got up at 7:30 AM, got dressed, and had some of the Honeybelle tangelos we bought yesterday.  Honeybelles are only available for about a month starting this time of year and are highly touted so we bought a quarter-Bushnell bag.  We were, however, quite disappointed in their taste and texture.  We will eat them anyway, of course, but they will not be the treat we were counting on.

We planned to leave at 8:30 AM to drive to the Florida State Fairgrounds for the Tampa RV Supershow.  It was still raining and was forecast to continue through the morning.  I took the vertical grip off of the Sony SLT-a99v to lighten it and make it easier to carry in the Cotton Carrier camera harness/holster.  I packed a couple of extra batteries, we took our raincoats, and headed out.

We encountered very heavy rain between Arcadia and Tampa, especially along FL-70 between Arcadia and I-75.  We arrived at the fairgrounds around 10:15 AM, got our tickets, and made it into the Expo hall just as another heavy band of rain moved through.

A Prevost H3-45 VIP conversion shell on display at the Tampa RV Supershow. The driver side of the coach is elevated on ramps and mirrors on the floor allow show attendees to see the underside of the bus.

A Prevost H3-45 VIP conversion shell on display at the Tampa RV Supershow. The driver side of the coach is elevated on ramps and mirrors on the floor allow show attendees to see the underside of the bus.

Just inside the door to the right was the major display of Prevost bus conversions and to the left was a major display of Airstream trailers and Class B motorhomes.  We crossed paths with Steve Zigler, Prevost Sales Manager for conversion shells and chatted briefly.  We met Giesle from the home office in St. Claire, Quebec and also met Melanie from Millennium Coach.  We found out from Melanie that Millennium is now the primary corporate support for the Royale Coach Club.  Apparently Liberty Coach took over sponsorship when Royale Coach folded around 2005 and Millennium took over from Liberty some time more recently.  We were members at one time but have not paid dues in several years.

The Prevost coaches were one of the main things we came to see and meeting people from the company was a bonus.  Our other objective was to check out all of the parts and accessories vendors, of which there were many, and RV Parks and Resorts, of which there where an equal number.  We mostly picked up literature until we found Bill and Brenda Phelan’s booth.  One of their products is tire covers made from heavy nylon mesh material.  It blocks most of the sunlight while allowing moisture to escape.  We have meant to get tire covers for years but never have so we ordered six in a dark brown material.  They are a significant purchase, but not compared to the tires they are designed to protect.  They will make the covers based on our tire size and ship them to us.  They also make nylon mesh windshield wiper covers but I need to measure the length of our lower wiper blades and send Brenda the measurement.  Another product of theirs are windshield and side window covers.  These, however, are custom made on site.

The interior of the Prevost H3-45 VIP motorcoach conversion shell. This coach was actually in the process of being converted by Millennium for a customer. Note the interior layout marked out on the floor.

The interior of the Prevost H3-45 VIP motorcoach conversion shell. This coach was actually in the process of being converted by Millennium for a customer. Note the interior layout marked out on the floor.

In the other vendor building we stopped at the booth for Williston Crossings and Belle Parc RV Resorts.  Alan, who is the managing partner for both properties, was staffing the booth so we chatted with him briefly.  We also stopped at the booth for Florida Grande Motorcoach Resort in Webster, Florida.  This was the other RV Resort that our friend, Ed Roelle, suggested we check out two years ago.  Unlike Williston Crossings, where we ended up, the lots in Florida Grande are all for sale as deeded properties with a fractional ownership in the common grounds and structures.  At least that was our understanding.

The sites at Florida Grande sell for about $48K and a coach house can be added for about $31K.  HOA fees currently run about $550 per quarter but we did not inquire about how the level is set or what limits might exist on them being raised.  Lots can be placed in a rental pool when unused but we did not ask if owners can arrange their own sublets.  We heard from someone later than only about half the lots are sold.  That means lots are still available for purchase, but also makes such a purchase potentially risky.  It means plenty of unsold lots are available to rent and if the rest of the lots do not eventually sell in a reasonable amount of time the future of the whole development would be in doubt.

We are not planning on purchasing a lot anytime soon, in Florida or elsewhere, but it is an idea that interests us longer-term.  We might drive up in the car to check it out or, more likely, stop there for a few days in the bus when we finally leave Big Tree RV Resort in March.

We eventually found our friend, Al Hesselbart, manning his Antique RV booth at the far end of the fairgrounds.  He was asked by the RV Show organizers to put together an antique RV display but relegated him to a remote corner of the show.  He had commitments from the owners of eight antique RVs, plus his own 1978 Newell, but four of them backed out at the last minute and the other four simply did not show up.  Whatever their reasons it was disappointing and inconsiderate.  Al had a large TV monitor with a slide show of about 500 images running automatically in a loop.  He had them in a shelter to protect them, and him, from the worst of the rain.

It was almost 5 PM by the time we got back to our car.  We discussed calling Ed and Betty Burns, who live near Bradenton, to see if they were up for a visit but we were at least an hour away and decided it was too short a notice, too late in the day, and we were too tired.  We fought our way through Friday rush hour traffic across US-301 to I-75 and headed south to exit 217, which is FL-70 to Bradenton (west) and Arcadia (east).  We stopped at the Speedway for gasoline and bought two coffees to scare away the cobwebs.  It had been a long day.

As we continued east on FL-70 Linda got a call from her sister, Marilyn, to finalize plans for tomorrow.  We got back to our coach around 6:45 PM and had a light dinner of garbanzo bean salad sandwiches and a small glass of wine.  We then watched a program about Agatha Christy on PBS/Create followed by two episodes of Miss Marple.  Linda headed off to bed before the second episode was over while I remained up to continue working on my blog posts from today and the previous two days.

I stayed up to watch the WINK evening news (channel 11-1).  They reported that the storms this morning included a confirmed EF-1 tornado in south Fort Meyers and wind damaged property in Lehigh Acres.  The meteorologists made it clear that the January tornados from today and last weekend would normally be quite rare for this time of year but were not unusual in an El Niño year like this one.  We are headed to Fort Meyers tomorrow for the first time to visit with Marilyn and the weather forecast looks fine if a bit cool.  Another round of strong storms is forecast for Sunday morning in connection with the passage of yet another cold front trailing from a strong low pressure center moving east across the Florida panhandle.  We plan to stay home Sunday but Marilyn is flying back to St. Louis, Missouri, weather permitting.

 

2015/12/04 (F) The Chores of Life

Leave a reply

The overnight low was forecast to be in the mid-50s so before going to bed I closed the roof vents and we only left the windows open about half an inch.  I was up at 7:12 AM this morning and put on my sweats.  I fed the cats (they insisted), took out my nighttime bite guard, washed it, and put it away.  I then sat on the sofa with the heater pad on my lower right back and Juniper on my lap while I worked on my iPad.

Linda stayed in bed until 9:15 AM.  She is having trouble shaking the congestion and cough but the nighttime medication seems to control it and allow her to get plenty of much needed sleep.  Once she was up I made a pot of coffee and she fixed bowls of granola for breakfast.

My main focus today was working on our 2015 Year-in-Review Holiday Letter but we had other things to do as well.  At the top of my list was mailing the FMCA Freethinkers Chapter certification paperwork to FMCA HQ.  I also needed to do a load of laundry, our first since we left home a week ago.  Linda planned to work on her counted cross-stitch project but also needed to make a run to the Publix grocery store on the southwest corner of Gainesville.

The word “chore” is often used pejoratively, and that is an appropriate use according to the definition, but the first meaning is “…everyday tasks of running a household or farm.”  The definition goes on to include “…. difficult or unpleasant tasks …” and some chores are certainly more (or less) pleasant than others.  Linda likes to cook and I don’t mind doing the laundry but neither of us particularly enjoy cleaning.  I don’t mind dumping our holding tanks, a chore that many RVers apparently find onerous, but I do not like adjusting the pressure in our tires.

I gathered up the soiled laundry and laundry supplies and loaded them in the car.  The north bathroom/laundry building is in plain sight of our coach, and not that far away, but I had more stuff than I could carry in one trip and it was heavier than I cared to schlep around.  If we had an appropriate wheeled cart I might have used that, but we don’t.  I got two loads started but held off on the third until I had taken a shower.  The bathhouses are in the same building as the laundry.  I added my towel to the third load and started it.

In the middle of doing the laundry I was back at the coach, got the FMCA chapter certification paperwork in an envelope, addressed it, and added stamps.  I was going to walk to the Post Office but in the interest of time I drove to the Resort office instead.  That little task had been nagging me for quite a while so I had a sense of relief, as much as accomplishment, when I put the envelope in the outgoing mailbox.  Linda walked down and used the shower facility.

As soon as I got back to the coach with the clean laundry/supplies and brought them inside I put the 2m/70cm ham radio antenna back on the roof of the car.  Linda then took the car and headed for the Publix supermarket at the southwest corner of Gainesville.  I did not want to unload the car, and had work to do at the coach, so Linda went to Publix by herself so there would be room for the groceries.  I put the laundry away and then settled in to work at my computer.

I realized this morning that I do not have SPSS installed on my ASUS laptop so I will not be able to analyze the data from the FMCA education surveys myself, at least not until I get home.  That is unfortunate as I do not know at this point if HQ has the ability or willingness to do the analysis we need done.  I sent an e-mail to the committee chair and executive director to let them know.  Mea culpa.  I replied to a few e-mails and then resumed working on our Holiday Letter.

I realized last night that some of the images which had already been post-processed had dates in the file names that were different from the dates when they were taken.  As I was trying to arrange them in chronological order I went back and found the originals and corrected the dates.  I then continued placing and captioning the photos.

When Linda returned with the groceries I helped get them into the coach while she put them away.  She finally found the Snyder sourdough pretzel nibblers we like and we finished an open container of hummus and had some fruit for a light lunch.

For dinner Linda made a salad and sautéed mushrooms, onions, and broccoli as a topping for a baked potato, which we split.  I had a little vegan sour cream on my half.  After dinner we changed into warmer clothes and packed a bottle of wine and our two plastic wine glasses and walked to the firepit.

Friday and Saturday nights during the winter folks at the Resort gather at the firepit to enjoy the warmth of the fire, have a glass of wine, talk to one another, and listen to live music provided by volunteer residents.  Our friend, John Smith, is the main entertainer, doing mostly folk/rock/country-crossover.  He is also responsible for the fire since Kevin and Sharon sold their park model and moved to The Villages.  (We are still having a hard time comprehending that move.)  John performed solo in clubs and bars for a living many years ago before he and Ali got married.  Jeff sometimes brings his guitar and performs as well, his specialty being old time country music (such as Merle Haggard).  Other musicians occasionally show up, or at least they did two years ago.

We were the first to arrive (besides John) and chatted with him for quite a while before anyone else showed up.  Other folks drifted in and John eventually fetched his guitar and played.  Ali was visiting with Jeff and Kathy and was one of the last to show up.  Jeff and Kathy’s dog, Teddy, has lymphoma so they stayed at their 5th wheel with him.  We stayed to the end, said “good night” to John and Ali, and walked back to our rig.  We watched an hour of Create TV and went to bed.

 

2015/11/20 (F) The End of Projects (for now)

Leave a reply

Linda was up at 5:45 AM again and off to the bakery at 6:15 but this was the last time until spring 2016.  There is still more to do on both the software project and year-end accounting but she will do it remotely.  We need the weekend and the first three days of next week to get the motorcoach, the house, and us ready to travel and prepare for our Thanksgiving Day family gathering.  Also, unlike the last two winters, Linda does not plan to fly home in late February to take care of year-end accounting and tax work.  She will handle all of that from Florida instead, so she has to make sure she has everything she needs with her in the bus when we leave.

This was likewise the last day for me to work on bus projects.  The things I needed to do in the bus included:

  • Install metal edging to protect exposed tile edges.
  • Grease the steering column.
  • Install filter material over the HVAC holes under the bed.
  • Mount the West Mountain Radio RigRunner on the dashboard.
  • Pull the chassis battery tray out and check/clean/tighten the connections.

But I had a few other things to attend to first.

I was up and dressed at 7:45 and had an alarm set on my iPad for 8 AM to remind me to pick up our coffee bean order from Teeko’s.  I had a bowl of granola for breakfast and then called Brighton Honda.  My last oil change was at 99,280 miles and I now have over 105,000 on the odometer so I made an appointment for Monday afternoon to have the oil changed.  I had a cup of tea in the living room where I spent some time with our cats.  I then went to my office and replied to an e-mail from Gary at BCM.  I called Teeko’s to make sure our coffee was ready to pick up.  Mary did not have it packaged yet but said she would have it ready in an hour.  I indicated that it would be longer than that before I got there.  I called Discount Tire in Howell to see about having the tires on the Element rotated.  They were running 2 – 3 hours so I made an appointment for Monday morning.  I called Brighton Ford/NAPA to order an air filter for the bus.

I moved the brass colored stair edging into the bus and checked the temperature.  It was 64 degrees F so I bumped the thermostats up just a bit.  I also switched the remote temperature sensors so that #1 was in the freezer (top) and #2 was in the fresh food compartment (bottom).  I removed the ham radio antenna from its magnetic mount and put it in the car.  I finally left at 11:45 AM on my errand run.

My first stop was Wendy’s where I had an order of French fries for lunch.  I then went to Lowe’s, which was just across the street, for carpet stain remover and looked at tarps while I was there but did not buy one.  I don’t think we will be able to create enough space in the garage for the lawn tractor so I want to cover it for the winter.  From there it was less than a mile east on Grand River Avenue to the car wash.  I had taken the ham radio antenna off before I left the house but the car wash knocked the magnetic mount cellular booster antenna loose.  I pulled into a parking spot, put the cellular antenna back in position, and reattached the ham radio antenna.

I backtracked that same mile and stopped at Teeko’s to pick up our coffee order.  It seemed light but Mary already had it bagged and I was anxious to move along so I did not check it.  I continued west on GRA to the Bank of America branch near The Home Depot (which I should have done after stopping at Wendy’s).  With colder temperatures coming the next few days I decided to drive to the Shell station in Brighton and top off the tank.  The sign said regular was $2.059/gallon but the pump I used was set to $1.959.  Deal.

When I got home I checked the coffee order and realized something was not right.  There were supposed to be 16 vacuum sealed 1/2 lb. bags, four each for four different coffees, for a total of eight pounds of beans, but there were only 10 bags.  Some of them were definitely much less than a half pound but I did not have a scale and so I had no way to know for sure what the total weight was.  Three bags were also unsealed and some of the beans had spilled into the larger bag.  Two of those bags were the same bean but unfortunately the third one was different so I had no way of knowing which bag, or bags, the loose beans came out of.  I dumped the loose beans into the bag that was the most open as that was the easiest one to get them in.  I closed the three unsealed bags with spring clips, put everything back in the carry bag, and drove back to the coffee shop.

I was not pleased with the situation, especially the fact that I had to make this extra trip, but I worked through my frustration while driving and was friendly and courteous while I was there.  Being upset and nasty to people never accomplishes anything good.  Roger was there in addition to Mary and once I explained what we had ordered on Monday evening from Jeff it was obvious that something got lost in translation.  They will make it right and we will pick it up late in the afternoon on Monday.

For some time now we have felt that we do not always have Jeff’s full attention when he is waiting on us.  Teeko’s has had its challenges over the last couple of years, first with road construction making access to the strip mall more difficult, and now with the opening of a Panera on the opposite corner of the intersection.  My sense is that they have struggled financially as evidenced by the fact that they never spent the money for a proper neon sign.  As a result the shop is not as visible as it should be even though it is located at a major intersection.  Jeff got married last year and they just had their first child in September.  With those added responsibilities he went back to work driving a delivery truck for PepsiCo, which has a major plant on the south central side of Howell.  His parents, Roger and Mary, have been left to run the coffee shop during the day, which I suspect is not what they intended to be doing in their retirement.  Still, they are always very pleasant to deal with and I feel for their situation.

As much as we like Panera, when we still lived in Farmington Hills we tried to patronize a series of small, independent coffee shops but they all failed in the end.  Some failed because of mis-management, but ultimately they could not compete with the Starbucks, Panera, and Einstein Brothers stores in the area.  Sadly, I suspect this will also be the fate of Teeko’s even though it is a nicer coffee shop than the Biggby’s just down the street.  And it’s too bad (for us at least) as we really enjoy being able to purchase a variety of green beans and have them roasted to order.

Back home I finally got to work on the bus around 3 PM.  I got all of the old silver colored metal stair edging from the garage and determined where each piece had been installed.  I realized that I did not have a good way to cut the new edging nor did I have the time to measure, cut, and install it before it got dark.  I really wanted/needed the exposed edges of the tile protected so I decided to reinstall the old edging.  Although it had obviously seen heavy use over the years it was still serviceable.  Of equal importance was that it was already cut to approximately the correct length and angles.  I checked that the holes on the new edging would fall in different places than holes in the old edging.  That was the case, so I held each piece in place and drilled a small pilot hole at every third hole.  I changed to a different bit to drill through the metal that secures the edge of the plywood bus floor and then screwed each strip of metal edging in place.  The new edging will cover the holes from mounting the old edging.

This was the only work I was going to get done on/in/around the coach today.  Linda had called by this point to let me know she was heading home and was going to stop at Meijer’s along the way.  As soon as she got home she started making three batches of granola.  She is going to make and freeze as many batches as she can fit in the freezer so we can enjoy this fabulous granola well into winter.

While Linda made granola I worked at my computer cleaning up old e-mail.  Dinner was vegan Pad Thai; not like the real thing, of course, but it was easy, hot, and tasty enough.  We had some small oranges for dessert.  I worked at my desk for a while after dinner deleting old e-mails.  I quit at 8 PM to watch a few TV shows and work on this post.

 

2015/10/17 (S) First Snow

Leave a reply

Last night we removed the dining table from the back of my car and put it on the bed in the bus.  We then removed the two rear seats and put them in the garage.  We wanted the back of the Honda Element empty when we got up this morning as we do not usually have time to spare in the morning before driving to South Lyon for breakfast with the South Lyon Area Amateur Radio Club.

It’s always good to see our fellow hams and today was no exception.  We arrived just before 8 AM and stayed for over an hour.  We left around 9:15 and drove to Chuck’s shop in Novi to get the box with the two remaining lower windshields for our bus.  Chuck was already there and helped us load the box into the car.  The box was sized to hold five windshields but only had two in it so it was light enough for us to move by hand.  I knew it would fit in my car as we had measured it on a previous visit and I had checked the dimensions against the car.  We set one end on the tailgate, lifted the other end, and slid it in.  We chatted for a while, and looked at a project Chuck is working in for new front window shades, before heading home.

Phil was not at our house when we got home but he had obviously been there.  All of the concrete, and many of the rocks and boulders, were gone from the driveway extension area so I presumed he had loaded them in his truck and hauled them away.

The Converted Coach Owners (CCO) Halloween Rally was going on this weekend and today was the main day for activities.  We had intended/hoped to go to the rally but the progress on our bus remodeling has slowed over the last couple of weeks for various reasons, all legitimate, and it was not in a condition to travel or be used.  It’s not that things are not getting done; they are, just not as fast as we would like or need them to.  Among other things I have not yet secured the refrigerator and pantry.  We thought about driving over in the car but it was over two hours one way and we needed to spend what time we had available working on the bus and could not justify being gone.  Thanksgiving does not look/feel that far away anymore.  It also seemed ill-advised to be gone while Phil is here digging up the yard.

My main bus focus for today was completing the installation of the built-in sofa.  We had already set the plywood seat board on a blanket on the bus kitchen floor so I had access to the inside of the base/storage box.  I did not need Linda’s assistance for a while so she worked on her counted cross-stitch project.  Before starting on the sofa, however, I took care of a few other minor things.

First I replaced the alkaline batteries in the TempMinder thermometers with Lithium ones.  I then reset the minimum and maximum temperatures for the two remote sensors.  Sensor #1 monitors the freezer and sensor #2 monitors the fresh food compartment of the bus refrigerator.  The directions for the TempMinder suggest using Lithium batteries if the remote sensors will be in cold environments.

Next I got a piece of scrap SurePly underlayment to see how it would fit in the rabbited wood trim on the lower outside wall of the hallway.  I inserted it fully into a corner and marked the edges with a pencil.  It is approximately 3/16″ thick and fit nicely without being too tight.  With a layer of veneer it should be just right.  When I removed it the depth of the rabbits appeared to be 5/16″ to 3/8″.  I think the underlayment will make a nice base for hardwood veneer.  I will cut the panels 1/2″ wider (22-1/2″) and 1/2″ longer (28″) than the 22″ X 27-1/2″ dimensions of the framed opening and allow them to “float” just like a frame and panel door.

My last mini-task was locating the 1/4″ walnut veneered plywood we removed from the old refrigerator and measuring it to see if we had pieces big enough to panel the damaged area on the wall by the co-pilot seat.  I was pleased to find that the remaining pieces are large enough for this application.

By now it was 12:30 PM and my phone reminded me that we had an RVillage Ambassadors webinar/meeting at 1 PM.  Linda heated up some Amy’s Vegetable Bean Soup and made hot lentil loaf sandwiches with ketchup.  Yum.  We got our first snow flurries of the 2015-16 winter season during lunch and they continued off and on through the afternoon.  We moved to Michigan in May 1976.  It snowed on October 15th that year and we had snow on the ground every day until early April 1977.  While that has not held up over the years as a “typical” southeast Michigan winter it was very different from what we grew up with in Missouri and formed our first and most lasting impression of our adopted state.

I retrieved the link for the Go To Meeting from the RVillage website and put it in my web browser.  1 PM came and went with no meeting.  The meeting notice said “Saturday, October 17 at 10 AM PST” but they had clarified that was actually 10 AM PDT, which is 1 PM EDT.  We decided that perhaps they really meant PST, which would be 2 PM our time.  We tried again an hour later, but no meeting ever commenced.

When I finally got to work in the bus on the sofa I removed six screws, three each from two angle brackets, and pulled the entire base assembly out from the wall, giving me complete access to the HVAC duct and wiring chase.  Much of the final installation of the sofa involved this duct.

Powered and manual sheet metal nibblers with the opening Bruce just cut in the OTR HVAC duct and the piece of sheet metal that was removed.

Powered and manual sheet metal nibblers with the opening Bruce just cut in the OTR HVAC duct and the piece of sheet metal that was removed.

The ends of the plywood seat rest on two boxes with open ends that also serve as plenums for air from the OTR HVAC system ducts.  I needed to cut out rectangular openings in the vertical face of the duct to allow air into the back end of these boxes.  I used a 1/2″ drill to create starter holes at the corners of the openings and then used a manual sheet metal nibbler and a drill-powered reciprocating nibbler, both of which I borrowed from Chuck a few weeks ago, to cut out the sheet metal.  The two tools work differently but they both worked well and I was glad I had both of them for this task.  The powered nibbler created a lot of small metal debris so I vacuumed the whole work area very thoroughly when I was done nibbling.

The right (forward) end of the duct also had an extra hole in it where I did not need or want one.  I removed an old sheet metal patch plate and cut a new one to cover the area I needed to close off.  I ended up having to pre-drill holes as I spun the heads off two of my cheap sheet metal screws.  I had a heck of a time getting the shafts out, but I got it done.  This was just one more example of why seemingly simple projects always take longer than they should.

Phil returned while I was working on the sofa and continued trenching in the French drain.  I stopped to chat with him briefly and Linda came out to let me know she was headed to the grocery store.  I then got back to my own tasks and let Phil get back to his.

The left support/plenum box with the circular register hole cut in the face plate.

The left support/plenum box with the circular register hole cut in the face plate.

The open fronts of the two plenum boxes are attached to the inside of the vertical front support, which is 3/4″ walnut veneered plywood.  To get the air out of the boxes and into the coach my design called for brown plastic 4″ round louvered diffusers.  They are considered “four inch” because the two inch long cylindrical pipe on the back will just fit through a 4″ diameter circular hole.  (A 4″ flexible duct, like dryer duct, will also just fit over the pipe.)  The visible part of the diffuser is actually 5-1/2″ in diameter.

The inside width of the plenum boxes is 4-1/4″ by design.  I needed to center a 4″ hole within that space so I had to locate the center point for my 4″ hole saw very accurately side-to-side.  I also wanted the hole centered vertically.  Using my small square I marked the vertical midpoint on the edge of the front plywood at each end.  I then measured in 2-13/16″ from the midpoint mark and used my spring-loaded center punch to mark the center of the hole.   [The 2-13/16″ dimension came from half the inside width, or 2-1/8″, plus the thickness of the plywood used to make the plenums, or 11/16″.]

A close up view of the nylon mesh screen material used to cover the opening in the HVAC duct to keep critters that might get into the duct from getting into the support/plenum box.

A close up view of the nylon mesh screen material used to cover the opening in the HVAC duct to keep critters that might get into the duct from getting into the support/plenum box.

I stood the boxes on their back ends so the front board was horizontal.  I straddled the front board with my legs to hold it and drilled starter holes with a #6 countersink bit.  I then drilled the 4″ holes with a 4″ hole saw using my 1/2″ Craftsman corded drill, being careful to have the pilot bit in the starter holes and drill perpendicular to the face of the plywood.  I have had this drill for 37 years.  It is very powerful and has several ways it can be gripped quite securely.  It is large, heavy, and lacks the convenience of a cordless drill but when I need to use a bit with a 1/2″ shaft and/or need the torque, this is still the drill for the job.  The hole saw created some sawdust so I vacuumed the whole area thoroughly when I was done drilling.

I was just finishing this work when Linda got back from the grocery store.  She put the groceries away and came out to see if I needed any assistance.  I already had the roll of plastic screen in the bus and she got the Gorilla Tape from the garage.  I cut pieces of the screen large enough to cover the two rectangular openings in the HVAC duct and used lengths of Gorilla Tape to secure them.  We then slid the base/storage assembly back into position, pushed it tight to the HVAC duct, and reattached it to the wood wire chase on top of the duct.  The two support boxes and the return air box have foam weather stripping on the back edges to seal against the duct.

We picked the plywood seat up off of the kitchen floor and set it back in place but did not secure it.  We left it out several inches from its original position and got a seat and back cushion from the bedroom.  We experimented with different spacings and finally agreed that we need to have the seat out 4-3/4″ farther than originally designed.  The current hinge board is 11/16″ plywood, 2-3/4″ wide by just under 78″ long.  This board is screwed to the top of the wiring chase and to one side of the 72″ piano hinge.  I will replace it with a piece that is 7-1/2″ wide by the same length.  I will also have to provide some additional support for the seat side of the piano hinge as in the original design had both sides of the hinge resting on top of the wiring chase on top of the HVAC duct.

The Tulip Tree behind our house in its full fall glory. This is the first photo to be posted in this blog taken with the new Sony a99v DSLT camera.

The Tulip Tree behind our house in its full fall glory. This is the first photo to be posted in this blog taken with the new Sony a99v DSLT camera.

That was the end of the interior bus work for today.  By the time we were done Phil had driven his front-loader onto his flat-bed trailer and secured it so it appeared he was wrapping up for the day.  I chatted with him about the project for 30 minutes before he left.  Earlier in the afternoon I had found my site plan drawings for the bus barn and agreed to stake out the driveway tomorrow so we could review it first thing Monday morning.

Linda had invited Meghan and Chris for brunch tomorrow but it was not a good weekend for them as the Michigan vs Michigan State football game was taking place in Ann Arbor.  Chris manages the Pizza House restaurant, and being away on football Saturday is not an option.  They will come next Sunday (31st) instead.

For dinner Linda made a nice salad of mixed greens with dried cranberries, sliced almonds, and diced onions dressed with raspberry vinaigrette.  The main course was pan-fried polenta with vegan puttanesca sauce.  It held its heat to the last bite and was very satisfying on a cold evening.  I opened a bottle of Cupcake Black Forest red wine.  We have had it before and, although drier than I prefer, it went well with the meal.

After dinner I got my flashlight and checked the bus for axle/hub seal leaks by looking under the bus from the opposite side to see the inside of the wheels.  I did not see anything to suggest a problem on any of the six positions and will text that information to Joe tomorrow for planning purposes as he would require a second day to work on the seals if that was needed.

We spent the last couple of hours of the day in the living room, with the fireplace turned on, reading, writing, and playing games while enjoying some red grapes for dessert.  Linda got a text from her sister-in-law, Mary, with a photo of her and Ron “standing on ‘the’ corner in Winslow, Arizona.”  Ron has been retired for many years but Mary only recently retired and they are on their first extended camping trip in their A-liner trailer and their first trip to the southwest U.S.

We went to bed around 10 PM.  Linda fell asleep quickly while I divided my attention between cooking shows on the Detroit PBS Create channel, a concert by Eric Clapton on PBS, and working on this post.

 

2015/06/25 (R) The Mouse

Leave a reply

Brighton Honda called yesterday in the afternoon to get permission to do additional work on my car.  Since we plan to keep the car for a while, and then perhaps give it to our son, it was the kind of work that needed to be done regardless of the costs.  They called back later to indicate that they would not have it aligned before closing time.  That was fine with us as it would have been inconvenient to impossible for us to get there by 6 PM to pick it up.  Linda told them to call in the morning when it was ready.

The top of the 40-foot tower from the WNW showing all of the antennas and the pulley with the haul rope. The weather had definitely deteriorated from the day before.

The top of the 40-foot tower from the WNW showing all of the antennas and the pulley with the haul rope. The weather had definitely deteriorated from the day before.

It is amazing how attuned we become to routine sounds and how sensitive we are to non-routine ones, even (especially?) while sleeping.  So it was last night that I was suddenly aware that one of our cats was making a repetitive sound that was unusual.  I turned on my flashlight, hoping to not disturb Linda, and got out of bed.  Both cats were hunched down on the floor on Linda’s side of the bed with Jasper in front.  He was the one responsible for the sound and the reason was next to his head and about 3 inches away; a little dark gray mouse.

My first thought when I see one or both of the cats with a mouse next to them rather than in their mouth is that it is dead but that was not the case.  This mouse was alive and apparently not injured.  I have seen this behavior before in which the mouse basically “plays dead” and the cats leave it alone but watch it carefully.  Mice seem to know that cats are triggered by movement and that if they sit very still the cats just sit there and guard them.  It was 4:30 AM and I was not fully awake so I do not recall the exact sequence of events, but the mouse somehow ended up in our master bathroom.   I do not recall what I did with the cats but I think I went and got a box with high sides and tried to get the mouse to go in it and it made a run for it towards the bathroom.  Linda was awake by this point so she got a towel for me.  I went in the bathroom and used the towel to block the gap under the door and prevent the little critter from getting back into the bedroom while I tried to get it into the box.  I was unsuccessful and it managed to find a place to hide in the hot water baseboard radiator.

Linda got one of the live traps we recently purchased and baited it with the recommended saltine and peanut butter.  We set the trap near the radiator, turned out the bathroom light, shut the door, and tried to plug the gap with the towel from the outside, figuring we would deal with the mouse in the morning.  Juniper kept pawing at the towel and pulling it back from the door so we put both cats out of the bedroom and shut the door.  They found that confusing as they sleep with us and generally have the run of the house.  One or both of them pawed at the door meowing to get back in for quite a while.  It wasn’t the best night’s sleep we have had and the timing was unfortunate given the hard day of tower work.

Brighton Honda called at 8:01 AM to let us know the car was ready.  Hello, I’m awake now!  I checked on the mouse and it was now safely tucked away on top of the radiator fins inside the housing where neither the cats nor I could get to it.  We decided to leave the live trap in place, sealed the gap under the door, and kept the bedroom door shut to keep the cats out.

I had planned to drive to Isringhausen’s U.S. headquarters in Galesburg, Michigan today but first we had to get my car.  As long as we were headed that way we decided to go to the Brighton Panera for coffee, but had toast and juice for breakfast at home before we left.

The 100,000 mile service is extensive and includes changing the spark plugs.  Beyond the routine service items the Element needed a new ball joint and tie rod and had a stuck brake caliper pin that had to be repaired.  Given the front end work I also had them align it.  Butch and I rebuilt the front brakes last year so I was surprised that there was an issue with them, but the car has been towed and driven in some harsh environments since then so that may have been a factor.

The Panera at Grand River Avenue and I-96 is not one of our favorites.  More often than not we end up with coffee grounds in our cups and the bathrooms are not maintained as they should be.  Today was not the first time we have been to this location that the men’s restroom was out of toilet paper.  It is also often freezing cold inside the restaurant and today was no exception.  The weather was overcast and a bit gloomy but the outside temperature, while not warm, was much more comfortable than inside.  We were also unable to connect to their Wi-Fi signal, which is generally useable.  That’s pretty basic stuff to not be able to get right and falls squarely on local management in my opinion.

While we drank our coffee I called Rick Short at ISRI to make sure he would be in but I got his voice mail again.  I asked for a call back but never got one so I did not make the trip to Galesburg.  Apparently they have better things to do than be of assistance to me.  I only want to buy one chair, not a fleet of chairs, so I understand my relative unimportance, but I don’t like it just the same.  We decided to spend the day at home completing the work from yesterday, which had made a mess throughout the house.

One of the things we needed to do was register our cellular booster system.  Given that it is a five band device I was not clear on whether we had to register it only with Verizon or with all of the carriers.  I called the company we bought it from, Cellular Solutions, and talked to Judy who said we only had to register it with the carriers we personally use.  For us that is Verizon Wireless.  Registration was via the Verizon Website and was simple enough.  It did, however, require me to log in to our My Verizon account and navigate through a couple of screens to a page where we could enter the information from the label on the box.  The serial number was on two peel off tags, so one of those went on the booster and the other one went in the manual.

With the unit registered I turned the power switch on and watched the ‘Alert’ lights all go solid yellow.  As I mentioned in yesterday’s post solid yellow lights are not described anywhere in the manual.  I called Cellular Solutions back and said I had a technical support question.  The woman on the phone took my name and number and said someone would call me back.

Since I was apparently taking care of phone chores I decided to call Universal Towers and inquire about their B-30 base.  The woman who answered the phone never gave her name but was able to answer some questions.  She indicated that their base might or might not be compatible with older Heights Tower products, depending on exactly which product I had, and that I would have to talk to the owner, Bill, who wasn’t there at the moment.  She did know that the outside-to-outside measurement of the legs on a B-30 base was 30 inches and the base cost $290.  She also told me that the larger bases, like the B-30, consisted only of the three rods with the mounting yokes on top; the three rods were not otherwise connected together in any way.  She also confirmed that the ‘U’ shaped yokes at the top of the base rods were welded on and not adjustable.  The normal installation procedure involved connecting them to the bottom of the legs of the first section of the tower, setting them in the hole as the concrete is poured, and adjusting them by moving them around until the legs of the tower were plumb.  That sounded to me like a process where a lot could go wrong and not be repairable.

I pulled a 75 ohm coax out of the ceiling of the basement yesterday.  We laid it out in the basement to see how long it was and it looked to be at least 60 feet.  Linda suggested we test it before running it through the basement ceiling which was a very sensible idea.  I unplugged the power adapter for the TV amplifier power inserter, detached the coax that feeds the TV in the bedroom, attached the downstairs cable, and connected the other end to the basement TV set.  Linda set up the TV for Antenna input, did an All Channels scan, and got the same stations we got yesterday, minus a couple.

In spite of what appeared to be acceptable performance I decided I wanted a new coax cable and Linda wanted to return three of the ropes I bought at Lowe’s but never used.  She found the receipt and we went to Lowe’s.  They had a good quality RG-6 quad-shield coax (75 ohm) in various lengths including 50 feet, which is what I needed.  At the register I decided to buy two more 40 pound bags of solar salt.  I am not an impulse shopper as a rule but their supply of Morton Solar Salt was very low and stocking up seemed like a good idea.

We stopped at Teeko’s to order coffee.  Mary took our order and rang it up; one pound each of the three different half-caff blends that have become our standard.  We took note of the fact that the Bennigan’s restaurant building on the northwest corner of Grand River Avenue and Latson Road was gone and a sign said a Panera would be coming soon to that location.  We didn’t say anything to Mary, but that cannot be good news for Teeko’s.  We will continue to buy our custom roasted beans at Teeko’s as long as they are open but it is going to be difficult for them to compete with a $2.25 cup of bottomless coffee, free Wi-Fi, a restaurant, a bakery, drive through service, and ample parking with great access to I-96.

When we got home I checked the live trap in our master bathroom and we had captured the mouse.  We took the trap to the northeast corner of the property, towards our neighbor’s pond, and set it free.  It did not want to leave the trap and I had to encourage it to go.  Once it hit the ground, however, it scampered away looking for a place to hide.

We then worked on running the new coax from the basement TV to the sump pump room above the suspended ceiling.  I disconnected the power inserter for the amplifier and disconnected the old coax we had tested earlier.  I notched a ceiling panel at the corner of a boxed support column behind the basement TV to allow the ceiling tile to go back into place around the coax.  We then installed one of the wire channels to contain and hide the coax from the ceiling down to the TV set and connected it to the back of the set.

In the sump pump room I attached the coax from the cable entry box (CEB) to the input of the new 1-to-2 signal splitter.  I attached the coax for the bedroom TV to one output from the splitter and the coax we just ran to the other output.  I mounted the splitter on the wall of the sump pump room and secured the cable coming from the CEB to the ceiling.  I then plugged the power supply for the power inserter back in to an AC outlet.  Linda scanned for channels and verified that everything was working correctly.  We then installed the other wire channel alongside the trim on the bedroom doorwall to route and hide the cable coming up from the basement.

I continued to fuss with the cell phone booster gain settings.  We had not gotten the promised return phone call from Cellular Solutions Technical Support so I called them.  I got Judy again and explained what I was seeing with the solid yellow lights.  She checked with her tech support people and they said the manufacturer (SureCall) told them the solid yellow was the same as the blinking yellow; that the booster was adjusting the gain and it was “normal.”  The manual says that normal is when the light is off, so I’m not sure I buy this explanation, but based on that I left the booster turned on.

With all of that done we started cleaning up the tools and materials we had scattered over two floors of the house.  I decided that was also a good time to start a load of laundry, although it was actually rather late in day for that.  I did three loads by the time I was done and it was sometime after 10:30 PM before the last load was dry.  I needed to be up at 7 AM to be at breakfast in South Lyon at 8 AM as our SLAARC group would start setting up for the ARRL Field Day event at 9 AM.

 

2015/06/24 (W) Up The Tower

1 Reply

Today was the day to finally climb the tower to remove an old TV antenna, reposition an amateur radio antenna, and install two new antennas, one for OTA TV and the other for a cellular booster system.  But there were other things to do before I was ready to climb.

I was up at 7 AM and on my way to Lowe’s in Howell by 7:20 AM in search of a solution to the problem of how to mount the outdoor cellular booster antenna.  I ended up buying two 2-1/2 inch U-bolts.  Although the tower legs are 1-5/8″ in diameter the angle bracket attached to the bottom of the antenna is 2-1/4 inches wide.  Thus I needed the 2-1/2 inch spacing for the threaded ends of the U-bolt to clear the bracket.

Back at the house Linda was up and had the coffee made.  We had a quick breakfast of homemade granola.  I removed the tire pressure sensors and GPS from my car and headed to Brighton Honda to drop it off for its 100,000 mile service appointment.  Linda arrived at the dealership about 10 minutes later.  We then headed to Adams Electronics in Wixom.  While Adams Electronics primarily serves the public and business communications markets owner Scott Adams, AC8IL, is a long-time ham and a member of the South Lyon Area Amateur Radio Club and Novi Amateur Radio Club.  Well known in the local amateur radio community, Scotty is the local go-to guy for certain kinds of equipment.  I ordered two coaxial cables from him the other day and we were here to pick them up.

We left to return home at 10 AM so I called Mike (W8XH) to let him know we were running a little behind.  So was he, but thought he could be at our house by 11 AM.  That gave me time to drill a hole in each of the two U-bolt retaining plates and cut a short piece of 1″ square aluminum tube to use as a spacer.  That was the last fabricating I needed to do and we got busy staging all of the materials we were going to need to get the tower work done efficiently.

Setting up the tools and parts outside the "drop zone" of the 40-foot tower on the east end of the house.

Mike (W8XH) setting up the tools and parts outside the “drop zone” of the 40-foot tower on the east end of the house.  (Photo by Linda)

Linda set out a sheet near the tower but not in the “drop zone.”  We spread out materials and tools on the sheet and used it to make sure we could find things quickly and keep them from getting lost in the grass.  I also brought all of my tool boxes to the tower area.  With everything assembled it was time to climb.  I set up our 7 foot step ladder on the east end of our rear deck to provide access to the roof near the tower.  Mike helped me into his climbing harness and got it adjusted.  Once on the roof I took the harness off temporarily as my first task was to remove the 2m/70cm base station antenna.  After clipping the plastic cable ties I lowered it down to Mike while Linda took photographs.  (She helped with many aspects of the work today but was the only photographer.)

Starting up the tower from the roof of the house. (Photo by Linda)

Starting up the tower from the roof of the house. (Photo by Linda)

I put the harness back on and Mike tossed me one of the 100 foot ropes which would eventually be used to haul materials and tools up and down the tower.  I secured the haul rope to one of the unused seat clip rings and Mike instructed me on how to secure the harness while climbing.  I put the waist strap around the tower and clipped it in.  I then put one of the two fall cables, attached to the ring at my upper back, around one of the legs above one of the cross bars above my head and clipped it into the ring at my chest.  The tower is adjacent to the east end of the house and is attached to it by two pipe assemblies just below the soffit (the house has hip roofs) so it was easy to step onto it.  After that things got tougher.

The horizontal trussing on the tower is two feet apart vertically.  That spacing was right at the limit of how high I could lift my right foot and required me to pull myself up part way until I could push with my right leg.  Once up on the next rung I attached the other fall cable, moved the first one higher, and slide the waist strap up to position myself for the next step.  I repeated this pattern with the two fall cables and the waist strap as I worked my way slowly up the tower, clipping old plastic cable (zip) ties as I went.  The tower definitely had some give but I was quickly acclimated to the amount of sway and found it to be acceptable so we decided not to guy the tower with the other three ropes, which would have slowed my ascent even more.

When I finally reached the top of the tower I untied the haul rope, looped it over one of the southeast facing horizontal bars and hauled it up allowing the free end to lower down to the ground.  Mike then tied the rope to the standoff pulley I had fabricated and hauled it up to me.  I already had cable ties, a diagonal cutter, and a pair of slip pliers with me.  I set the threaded rod on the northeast and southeast cross bars, inside and against the two legs that were parallel to the side of the house, and secured it with cable ties.  This was a three-handed job that I had to do with two hands but I got it done while only dropping one cable tie.  With the pulley rod secured I undid the rope and then undid the knot tying the two loose ends together.  I fed one end through the pulley and retied it to the other end.  We now had a way to haul materials and tools (in a bucket) up to me at any needed height while keeping it 18 inches away from the tower.

Three-quarters of the way up ad working with the haul rope. (Photo by Linda)

Three-quarters of the way up ad working with the haul rope. (Photo by Linda)

The next task at the top of the tower was to remove the old TV antenna, mast, and rotor.  When I finally had a close up view of these old components it became apparent that my best course of action was to try and unclamp the base of the mast from the rotator, lift it off of the rotator, and toss it to the ground.

The mast clamp parts were all very rusty so Linda got the WD-40 and Mike sent it up in the bucket.  I sprayed the nuts on the mast mounts and also the rotator leg clamps.  I tried undoing the mast clamps with a slip pliers but it was no good, so Mike sent up three open/closed end wrenches.  One of them was the right size and to my surprise the rusted nuts broke loose and started backing off.  One of them did not want to come off but unscrewed the entire bolt instead.  Fine.  The bolt had a screwdriver slot in the top and was threaded into the rotor housing and I did not care how it came out as long as it did.  I got the mast clamps loose enough that I could work the bottom of the mast free from the top of the rotor.  There was a lot of rust there too.  After clipping some coax cables, rotor control wires, and plastic cable clamps I repositioned myself up one rung on the tower so I could get enough leverage to the lift the mast clear of the rotator collar and control it well enough to make sure the antenna fell to the ENE away from the house and my helpers down below.  And that is exactly what happened.

The first antenna to get mounted was the outdoor antenna for the cellular booster system.  Mike sent the antenna up in the bucket along with the various pieces I needed to secure it to the short top/center mast support tube so the entire antenna, which is omnidirectional, was above all parts of the tower.  What would have been an awkward assembly on the ground took on added difficulty 40 feet in the air but I got it secured with good access to the N-female connector on the bottom.

At the top with the pulley in place and using it to haul up a bucket with tools and parts. Mike is controlling the haul rope on the ground. (Photo by Linda)

At the top with the pulley in place and using it to haul up a bucket with tools and parts. Mike is controlling the haul rope on the ground. (Photo by Linda)

We decided to run the coax on the outside of one of the tower legs rather than down the inside of the tower.  Mike tied the LMR-400 coax to the rope and hauled it up to me.  In addition to the haul rope Mike tied a second control line to the bucket to keep it from swinging all over the place.  I connected the coax to the antenna feed point and then wrapped the connection with coax seal tape.  I then routed the coax down the east leg of the tower and zip tied it to take the weight off of the antenna connection.

Next up was the 2m/70cm amateur radio base station antenna, often referred to as a 2m/440 dual band antenna.  (In this nomenclature the “2m” refers to a range of wavelengths for one of the VHF ham bands and the “440” refers to a range of frequencies for one of the UHF ham radio bands, so it is a mixed units designation.). The antenna is about five feet long with three short counterpoise (ground plane) rods near the base.  It had an LMR-400 style cable connected to it but with PL-259 male connectors on each end.  The antenna feed point is an N-female connector so I had an adapter installed to make everything compatible.  Mike removed the coax and the adapter, zip tied the antenna to the haul cable at three points, put the 10mm wrench in the bucket, and hauled it up to me.

The ham radio antenna was also tricky to get mounted.  I installed it at the top of the northwest leg so that most of the antenna was above the tower and two of the three short counterpoise were parallel to the west (N-S) and northeast (NW-SE) crossbars.  The antenna by itself is light in weight but it is five feet long and mounts at the bottom nine inches, so most if it was above me with a tendency to wave around in mid-air.  With the coax connected, however, it weighed quite a bit more.  I temporarily zip tied the coax to take the weight.  I then had to hold the antenna with its base against the northwest post at my head level, push a U-bolt through the mounting bracket and past the tower leg, slip the mating clamp over the two ends of the U-bolt, and then get a small lock washer and nut on each threaded bolt end.  I then had to repeat this for the second U-bolt.  Again, a three-handed job that I had to do with only two hands.

The old OTA TV antenna and mast on the ground. It came down by the gravity method. (Photo by Linda)

The old OTA TV antenna and mast on the ground. It came down by the gravity method. (Photo by Linda)

The bonus to this work at the top of the tower was a commanding view of the surrounding countryside, which was mostly trees in every direction.  I even saw two towers far to the north and was kept company by a soaring vulture just to the NNE.  I was also able to determine that the tops of the large white pine trees behind the east end of our house are about 10 feet higher than the top of our tower, putting their overall height at about 55 feet as their bases are lower than the base of the tower.  We plan to put the 70 foot tower at a spot that is surrounded by these trees on three sides (W, S, and E) so the top of the tower, and any antennas mounted there, will be well above the tree tops.  That is especially important as we plan to eventually put an HF beam antenna up there on a mast attached to a rotator and it will need to be able to rotate freely for 360 degrees.

The final antenna was the hardest.  The Antennas Direct DB8e OTA UHF/digital TV antenna was very large and heavy by comparison to the other two.  In this case ‘heavy’ meant a few pounds.  It is actually two UHF antennas mounted at the end of a dual support arm structure.  The support arm mounts to a vertical pole, such as a tower leg, at its midpoint and there is a combiner box located there as part of the mount.  A short length of RG-59 (75 ohm) coax connects each antenna to the combiner box and the main coax connects there as well.

How tall the tower appears (and feels) depends on where you are standing. (Photo by Linda)

How tall the tower appears (and feels) depends on where you are standing.  Pulley and haul rope in the upper right.  Lots of coaxial cables to be dressed (secured) on the way down.  (Photo by Linda)

RG-59 is a different kind of coaxial cable from the LMR-400 used for the first two antennas.  LMR-400 has a 50 ohm characteristic impedance and is used for receiving and transmitting RF energy with considerable power if needed.  RG-59 is much smaller in diameter, more flexible, has a 75 ohm characteristic impedance, and uses F-connectors that are the standard for OTA TV, video, and satellite cables.  But I have gotten ahead of myself.  I had to come down a few feet on the tower to install the TV antenna but before doing that I had to start securing the transmission lines to the tower legs with cable ties.

Mike rigged up the haul rope in a ‘Y’ to lift the antenna from its center of gravity while actually attaching the rope to its ends.  That allowed the haul rope to both support the weight of the antenna and keep it oriented correctly while I positioned and clamped it to the southwest tower leg with the dual support arms pointing in an east-west direction.  Because of where I had the pulley mounted, and the length of the ‘Y’ in the support rope, I had to mount the antenna a few feet lower on the tower.  Fortunately the slightly lower height was not going to affect its performance.

Like the ham radio antenna, the OTA TV antenna mounted to the tower leg at two points.  The upper assembly was a U-bolt with a retaining bracket on the back side.  The lower assembly was a pair of straight bolts that went through the combiner box past the tower leg and had a retaining bracket on the back side.  The antenna came with wing nuts instead of washers and regular nuts, which helped a little, but I really needed three hands to get the antenna into position and tighten the mounting brackets.

Mike ties off the DB8e OTA TV antenna with an inverted "Y" so it will haul up in the proper orientation. (Photo by Linda)

Mike ties off the DB8e OTA TV antenna with an inverted “Y” so it will haul up in the proper orientation. (Photo by Linda)

Once I had the antenna sufficiently attached to the tower I was able to position the support arm close to the southeast facing side of the tower.  I then pointed the antenna on the east end of the arm ESE towards the Detroit area TV towers and tightened the two nuts on the mounting studs.  (The horizontal dual support arms are about 3 feet long so I was able to reach through the tower to get to the mounting studs and nuts.) I left the antenna on the west end of the support beam loose and turned it out of my way so I could complete other tasks.

Mike attached the end of the main RG-59 coax to the haul rope, put the amplifier and a 2-foot length of RG-59 coax in the bucket along with lots of zip ties, and pulled them up to me.  The amplifier is about 3″ wide by 2″ high and 1.5″ thick including the concave plastic backplate.  The backplate accepts two zip ties for mounting to a pole.  I positioned the amplifier about 8 inches below the antenna combiner box and cinched up the two zip ties.  I then connected the short coax to the combiner box output and put the combiner back it its protective, weather-gasketed plastic box.  I connected the other end of the short coax to the amplifier input and wrapped the connection with coax seal weatherproofing tape.

Installing the DB8e OTA TV antenna required three hands. Note that I am installing it at the highest point possible when suspended from the pulley with the haul rope in an inverted "Y" attachment. (Photo by Linda)

Installing the DB8e OTA TV antenna required three hands. Note that I am installing it at the highest point possible when it is suspended from the pulley with the haul rope in an inverted “Y” attachment. The yellow waist strap allowed me to lean back and work while the two red security straps would catch me if something broke. (Photo by Linda)

I attached the main RG-59 coax to the output of the amplifier, which is also the DC power input, and wrapped the connection in coax weather seal tape.  I then dressed the cable and secured it to the tower leg.  I aimed the antenna on the west end of the support arm WNW towards the East Lansing TV towers and tightened the nuts to lock it in position.

At this point I was finally done working on the antennas but had three coaxial transmission line running down the outside of the tower, one by each leg.  As I descended the tower, reversing the protocol I used going up, I secured all three cables every few feet.  I finally had my feet back on the roof at 2:20 PM, almost exactly 2 hours and 30 minutes from when I started climbing.  Projects usually take me twice as long as I think they will but this was about half as long as I thought it would take, so we were all pleased that the work had gone smoothly and relatively quickly.  My main objective was to get the old TV antenna down and the three antennas up but my secondary objective was to only climb and descend the tower once.  Mission accomplished, at least for now.

By now we were all hungry and thirsty so Linda made chickpea salad sandwiches and set out fresh sweet peppers, sliced apples, baby carrots, and cold water.  After a suitable lunch break we returned to the next phase of the work which was routing the coax cables into the cable entry box (CEB) and making the connections.

We started with the RG-59 coax from the OTA TV antenna.  I coiled the extra cable and hung it on the tower (with zip ties, of course), routed it into the CEB and connected it to the power inserter / lightning arrestor.  We purchased this cable from a Radio Shack store in Florida two winters ago to hook up our bus to the RV resort cable TV system.  Besides the coax it had a separate ground wire.  The amplifier and the power inserter both had connections for a separate ground wire so I connected it on both ends.

Routing coaxial cable into the cable entry box from the tower and the basement and making the connections. (Photo by Linda)

Routing coaxial cable into the cable entry box from the tower and the basement and making the connections. (Photo by Linda)

We had already routed a 75 ohm video cable from our bedroom TV to the sump pump room in the basement.  I selected a suitable length of this same type of cable from our existing inventory, connected it to the other side of the power inserter, and routed it through the back of the CEB into the sump pump room where Linda guided it.  Conveniently, I had a double-ended F-female barrel connector designed to connect together two cables with F-male connectors.  I plugged in the AC power adapter for the power inserter, which was already in the sump pump room, and we went upstairs to see if we were receiving any TV stations.

We set the ‘Source’ on the TV to ‘Antenna’ and did an ‘Auto Scan’ for digital channels only.  There are very few analog TV signals still in use and the ones that are reside in the old VHF TV spectrum which our new antenna cannot even receive.  The scan found 58 signals, which obviously included the sub-channels.  Besides the main Detroit stations and the East Lansing PBS station we got other Lansing area stations and even a station from Flint.  The nice thing about digital TV is that if you get a picture at all it is very good.

There is a large TV tower at I-96 and US-127 on the southeast corner of Lansing so we were probably picking it up.  There are several TV towers SSW of Lansing about 35 miles that serve Battle Creek and may serve Lansing and Kalamazoo.  They are 50+ miles from us and I did not have the west antenna pointed in exactly that direction but it may have been close enough to pick them up.  Flint is at least 35 miles away straight north off the sides of both antennas so theoretically we should not have received any stations from that direction.  We will have to check the AntennaPoint.com website and confirm by station identifier what stations we are actually receiving.

Feeling good about our success so far we routed the coax for the cellular booster across one of the support arms that brace the tower to the house just under the east soffit.  We dropped it down next to the wall and brought it into the bottom of the CEB, replacing the hole plug with a rubber grommet.  Routing it this way kept it out of the way of future foot traffic, or lawn and garden work, in the space around/between the tower and the CEB.  I connected the cable to the lightning arrestor and coaxed it unto position inside the CEB.  LMR-400 is stiff and bending it sharply will damage it.

I connected one end of the 15-foot LMR-400 cable to the other side of the antenna arrestor and routed it into the sump pump room where Linda guided it into position.  I secured it to the ceiling, brought it down the opposite wall, put a large 180 degree bend in it, and attached it to the connector on the bottom of the cellular booster.  I turned it on and watched the lights blink for a while.  All three of us then started checking signal strength throughout both floors of the house.  All five of the ‘Alert’ lights went from blinking yellow, which means the unit is adjusting the gain on that band, to solid yellow, which is not described in the manual.  Since we had not yet registered the device with Verizon Wireless I turned off the booster.

Back out at the CEB I removed one of the hole plugs directly below the input of the Morgan VHF lightning arrestor.  We routed the coax for the 2m/440 ham antenna across the tower brace, down the wall, and around through the bottom of the box where I attached it to the lightning arrestor input.  I had an old piece of 50 ohm coax with an N-male connector on one end and a PL-259 (male) connector on the other end.  I attached the N-connector to the output of the VHF lightning arrestor and fed the other end through one of the 2″ conduits into the sump pump room where Linda routed it out into the ham shack.

We set our “Go Box” on the desk, plugged the PL-259 into the SO-239 socket on the back of the case, plugged it in to AC power, turned on the power supply, and turned on the radio.  The radio, an Icom IC-7000, came up tuned to the South Lyon (K8VJ) repeater.  I transmitted and successfully triggered the repeater, which is currently at a secondary site about 20 miles from our tower.  Mike went out to his car and used his mobile radio to verify that we could transmit to and receive from the repeater.  I had a lot of background static (white noise) so Mike switched modes and transmitted directly to our antenna.  The signal was full scale and full quieting.  I have a ground lug in the Go Box but did not have it connected.  I vaguely recalled that I had to ground the box at the previous house to eliminate a noise issue.  (The radio and power supply are grounded to the box.)

I switched the radio to UHF and it was set for the Novi repeater.  I listened but did not hear anyone transmitting so I transmitted, giving my call sign and a brief message, and then listened.  I did not get a reply even though Mike was also monitoring the Novi repeater so I switched back to the South Lyon repeater.  Mike indicated that I had, indeed, triggered the repeater and that a couple of other hams acknowledged hearing me in addition to him.  It thus appeared that I did not have something set up correctly on the receive side of the radio for the Novi repeater but the system (radio, cables, arrestor, antenna) was clearly working.

That was enough work for one day so we gathered up all of the tools and unused materials and put them away.  We offered to take Mike to dinner as a ‘Thank You’ for his assistance.  It was more than helpful to have someone on the ground who was familiar with tower operations.  We considered several dining options but opted for Olga’s in Brighton.  Linda and I had small salads, sans the Feta cheese, veggie Olga’s that were excellent, and curly fries without Tabasco sauce for the ketchup.  Warning:  As inconceivable as it may sound, Olga’s does not have any kind of hot sauce in its restaurants.  Mike had a dish with chicken in that he said was very good.

Mike headed home from the restaurant as did we.  We were tired but very pleased with what we had accomplished in the course of the day.  We celebrated our accomplishments by watching several programs on Detroit PBS, something we have not been able to do for more than two years.

 

2015/06/12 (F) Forms and Family

Leave a reply

I was awake at 6 AM but not fully rested so I stayed in bed.  I got up at 7:30 AM, fed the cats, cleaned their litter tray, and then settled in at my desk to continue editing blog posts.  I had edited four more posts by 9 AM when I heard footsteps and running water, signaling that people were up and about.  I wrapped up my work and went upstairs to make coffee.

We sat around drinking coffee and tea and visiting.  Both cats have gotten more comfortable with Ron and Mary being here, but especially Juniper, who is seeking their attention and sleeping on the living room sofas while we sit and talk.

Ron and Mary were expecting a package today but found out late yesterday that it had not been sent.  As a result they needed to have documents e-mailed to us so they could deal with them and return them before they leave tomorrow for a week-long bicycle ride in northwest Illinois.  The e-mails came through and all of the documents were PDFs so they were easy to save and print.  I restarted my old Dell Precision Workstation in Windows 2000 Pro mode as that is where the scanner is installed and we would need it later to scan the signature pages, save them as PDFs and e-mail them back to the sender.  (I normally use this computer to run Linux.)

I left at noon for a 12:15 PM appointment at the Honda dealer to have the oil changed in my Element.  My car has just under 99,000 miles and really needed its 100,000 mile service, but I did not have time for that today so I had them change the oil and scheduled a return visit for Wednesday June 24 at 10 AM.  It has a torn driveshaft boot on the driver side front and the mechanic thinks the drive shaft should be replaced as water and dirt have certainly gotten in there and there is probably rust.  Ron tended to concur with that opinion.

Linda gave me a short grocery list before I left and I went to the Brighton Meijer’s after my car appointment.  By the time I got back Ron and Mary had finished reviewing documents.  I was going to scan the signature pages but it turned out that one of the signatures had to be notarized and the documents had to be faxed back in their entirety.  Linda researched places to get all of that done and they were headed out to take care of that as I returned home.  While I was out UPS dropped off a package from Prevost Parts with the window panel seal I ordered earlier in the week.  That’s two UPS deliveries to this week so my confidence is restored.

While Ron and Mary were out Linda made potato salad and I worked in my office.  I restarted my Dell Workstation in Linux mode (Ubuntu 14 point something) and installed about 45 updates.  While that was happening I edited a few more blog posts and got caught up.  Now all I have to do is post them.

Brendan, Shawna, and Madeline drove up after Madeline got up from her afternoon nap.  They arrived around 4 PM.  I quit working at my desk just before that and came upstairs.  Madeline is always excited to visit Grandma Linda and Grandpa Bruce but having Ron and Mary here was a bonus for everyone.

For dinner Linda served the potato salad, baked beans, and vegan cheese burgers with all the fixin’s.  We had a break in the rain and she cooked the burgers outside on the grill.  We had fresh strawberries and non-dairy “ice cream” for dessert.  Ron and Mary picked up an apple pie from the Grand Traverse Pie Company store in Brighton so everyone else tried some of that as well.  Conversation was about family, work, and travel.

By 7 PM Madeline was showing signs of being tired so Brendan and Shawna gathered up their things and headed back to Ann Arbor.  We stayed up until 10 PM talking, but did not play Mexican Train, and then turned in for the night.

 

2015/05/10 (N) Mother’s Day

Leave a reply
The dinette in our Prevost H3-40 before removal.

The dinette in our Prevost H3-40 before removal.

Our son invited us to their house in Ann Arbor for Mother’s Day brunch.  We arrived at 10 AM and Madeline was very excited to see us.  Besides Shawna and Madeline, Meghan, Chris, and Katie arrived shortly after us.  After some coffee and initial visiting we started the meal with grapefruit juice and champagne cocktails.  Meghan made three kinds of vegan scones and Brendan and Shawna made granola and fruit salad.  It all made for a very tasty brunch.  Katie had to leave for work but was able to stay long enough to enjoy brunch.  Brendan and I stayed at the house to chat while everyone else went for a walk.  By the time they got back Madeline was ready for her 1 PM nap, right on schedule.

HVAC grills removed from front of J-lounge (L) and dinette (R) in our bus.

HVAC grills removed from front of J-lounge (L) and dinette (R) in our bus.

After Meghan and Chris left Shawna needed to run to a local market to pick up a few things for dinner with friends who were coming over later.  They are going to need another vehicle and we potentially have one to spare.  They have kept Linda’s Honda Civic at their house the last two winters while we traveled, so they are very familiar with that car.  Shawna had never driven a Honda Element, or even ridden in one, so she drove our car and Linda went with her.  When they got back from the market we visited a while longer.

OTR HVAC duct and Aqua-Hot fan-coil unit. These were under the dinette in our bus.

OTR HVAC duct and Aqua-Hot fan-coil unit. These were under the dinette in our bus.

We left at 3 PM and stopped at Whole Foods Market for a few items.  We had seen the 2009 Egri Merlot at Whole Foods in the past but the vintage they are now receiving is 2013.  There is no guarantee it will taste anything like the 2009, but it was already on sale and we got an additional 10% discount on six or more bottles so that is how many we bought.  We have lots of other wines in the wine fridge so these bottles may get to age a little before we drink them.

Forward end of passenger side sofa with end panel, footrest, table, and drawer removed. The footrest, table, and drawer were all motorized.

Forward end of passenger side sofa with end panel, footrest, table, and drawer removed. The footrest, table, and drawer were all motorized.

Back at the house we had a light supper and slices of the 6-inch multi-layer cookies and cream vegan cake we got at Whole Foods as the final Mother’s Day treat.  I had a long, late evening phone chat with Butch about dual-orbital polishers and bus barns before turning in for the night.

 

2014/06/07 (S) D-Day Plus 70

Leave a reply

Today was the 70th anniversary of the invasion of Normandy; D-Day.  The youngest soldiers in that invasion, if they are still alive like my father, are now in their late 80’s.  The event is quickly slipping into history; in another decade, more or less, there will not be anyone left with a firsthand knowledge of the events of that day, or indeed of the whole of WW II.

As we do most Saturdays when we are home we went to our ham radio club breakfast in South Lyon.  We meet at a local Coney Island restaurant and we go for the company and conversation, not the food.  The service is excellent, however, as we have the same server every week and she knows everyone’s usual order and keeps the coffee flowing.  Linda’s standard breakfast is coffee and toasted rye bread with orange marmalade, although occasionally she has oatmeal.  My standard breakfast is coffee and a toasted English muffin with strawberry jam, but today I had a toasted bagel.  Sometimes you just have break with tradition.  On rare occasion I have the oatmeal, but it’s not really cooked the way I like.  When I want to splurge I have hash browned potatoes, cooked until a bit crispy, which I smother in ketchup laced with Tabasco sauce.  That dish is as much about the spicy ketchup as it is about the potatoes.

When we got back to the house Linda headed off to the grocery store while I put a load of laundry in the washing machine and got busy prepping the bus for travel.  The temperature had risen into the 70’s but all of the bus tires were in the shade, a good situation for checking and adjusting the tire pressures.  I removed the Pressure Pro sensors from all of the bus and car tires, checked and adjusted the cold pressures, and put the sensors back on, re-establishing the baseline settings for alarm purposes.

We had quite a bit of rain on our last outing and the bays were a bit musty so I opened all of them to let them air out.  I also opened all of my tool boxes for the same reason.  The inverter bay door has screened openings with shields on the inside that are open on the bottom.  The large shield by the GenSet radiator is secured with three screws across the top, none of which were holding.  I looked around in the garage for some suitable drywall anchors to put in the holes but I did not have (or could not find) any the right size.  A quick trip to Lowe’s, with stops at Walmart and Meijer’s for grocery items, and I had some viable options.  I had to fuss with it for a while, but I got it secured.  It was a small project to be sure but one that had been bugging me for quite some time and it felt good to put it in the done column.

Linda spent the early afternoon working on the accounting records for our GLCC chapter and then turned her attention to cooking meals for the upcoming week.  For rally situations, where we are away from our coach much more than we are there, it is easier for her to prepare dishes in advance that can be quickly and easily re-heated rather than cook from scratch.  I called Elkhart Campground and made a reservation for Sunday and Monday evenings.  Over the course of the afternoon and evening we selected clothes for the week, gathered up various items that travel with us, and loaded everything on board.  I positioned the Honda Element behind the motorcoach and connected them together for towing.  We will have a few last minute things to put on board in the morning but the final loading should be quick and easy.  It was a relaxed loading process and as we sat on the rear deck enjoying a glass of wine we reflected on how glad we were to have found this house and decided to move.  We had some of the vegetable chili for dinner and then watched Season 2, Episode 2 of Doc Martin before turning in for the evening.

 

2014/05/05 (M) Towering Heights

Leave a reply

It dropped into the upper 30’s early this morning.  Although I did not really want to go outside and work, it was the perfect time to adjust the pressures in the bus tires and reset the baseline pressures on the Pressure Pro TPMS.  I had a 10 AM service appointment for my car and wanted to take care of the bus tires before the air temperature warmed up or some of the tires sat in the sun.

I took the Honda Element to Brighton Honda for the 85,000 mile service which consisted of an oil change and multi-point inspection.  A quick trip to Best Buy to look for a case for my new ASUS laptop computer did not result in a usable case but I did discover a new Logitech mouse, the T630; very thin and stylish but unfortunately not in stock.  They printed out a sheet for me to take along.

I called Wayne (KD8H) and arranged to go see the Heights Tower he had for sale at 2 PM.  Mike (W8XH) came along to help me inspect it.  Mike has a Heights Tower so he is very familiar with them.  The tower was already down and disassembled into sections that were stored horizontally on saw horses.  The fold-over mount (FOM) was made of steel rather than aluminum and was rusty but very substantial.  Wayne had the motor for the FOM but no longer had the threaded rod.  The top tower sections had the mounting plate for a Ham II rotator and the bearing plate for the rotating mast.  He also had the Ham II rotator, and was willing to include that in the deal.  I wrote him a check and arranged to come back later in the week with a truck or trailer to pick everything up.  After I dropped Mike back at his QTH and returned home I e-mailed several SLAARC members to see if they might be have a truck and/or trailer and time to help me retrieve the tower parts.

I had been doing research on cases for the ASUS G750 series (ROG) laptop computer and found two on Amazon Prime from Everki that looked promising as they were designed to hold up to an 18.5 inch (diagonal) computer.  The Advanced was a padded top-load zipper case with a slender front zipper pocket.  The Lunar was also a padded top-load zipper case but had a larger zippered front pouch and a slender zipper pocket in front of that.  It also had a slot across the back that allowed it to be placed over the extended handle of a roller case.  The Lunar was 3x the price of the Advanced, but the Lunar looked like it would better accommodate the AC power adapter and other accessories I tend to haul around.  I had checked the ASUS ROG forum (Republic of Gamers) previously and the general opinion was that these two cases were both of good quality and big enough to hold my computer and related stuff.  I ordered one for delivery on Wednesday (2-day), no extra charge with Amazon Prime.