Tag Archives: gas grill

2015/04/02 (S) SLAARC and Company

Leave a reply

We arrived at the Senate Coney Island before 8 AM for the weekly SLAARC breakfast.  Paul (N8BHT) was already there and we were followed in closely by Steve (N8AR), Mike (W8XH), and Jim (N8HAM, the best call sign ever).  Bruce (W8RA) and Linda (NF8C) came in next followed by Harvey (AC8NO) and Diane, and then Gary (WA8TJA).  Others continued to come in but I lost track after that.  We sit at a long, two-sided table arrangement, so you can only talk easily to the person on either side of you and the three or four people across from you.  Bruce and Linda sat across from us.  The two Lindas like to talk so we try to arrange the seating to make that possible when we can.

Bruce and Linda just closed on a 25 acre property in Florida that includes a very nice house with a ham radio shack and five (5) towers with antennas so that was the main topic of conversation.  Bruce is also thinking about putting up a “barn” with a pad next to it for an RV so we talked about the requirements for the pad and the type/placement of the hookups.  We both had coffee and Linda had her usual dry rye toast.  I decided to change things up and had a dry, toasted bagel instead of my usual dry, toasted English muffin.  Sometimes you just have to live on the edge.

After breakfast we went to First Merit Bank along with Harvey and Diane.  Harvey is the SLAARC President, I am the VP, and Linda is the Treasurer and we are the folks currently on the account.  There was an issue with the bank’s paperwork and they needed to photocopy our driver’s licenses and get our SSNs.  It turned out that they also did not have the club’s EIN even though Linda and Paul, the outgoing treasurer, took care of some of this in late February.  Nancy helped us and was very nice, explaining that the bank had changed its policies and procedures recently and now required more documentation than in the past.  No problem, the bank is open on Saturday mornings and we are almost always in town for breakfast.

With our banking business concluded we headed towards home via Grand River Avenue.  We knew from yesterday that traffic was moving through the I-96/US-23 construction zone just fine, as long as there wasn’t an accident, but we wanted to stop at Brighton Chrysler Dodge Jeep Ram which is on GRA just west of US-23.  We walked around the lot looking at the Jeep Wranglers, especially the Unlimiteds, and after a suitable amount of time David Wade came out and introduced himself.  He showed us around, answered our questions, and gave us a nice brochure (book) and features/options guide.  We liked his attitude and demeanor and left feeling comfortable with him and the dealership.

We focused in fairly quickly on the Willy’s Unlimited model as the one that we thought would best fit our needs and budget.  It is similar to the Sport, which is the base trim level for the Jeep, but is available with the hardtop and, most importantly, the Rubicon heavy-duty suspension and off-road (knobby) tires. The Rubicon is the top of the line Wrangler Unlimited (4-door) but it is not just fancier in terms of electronic gizmos; it has an entirely different suspension, transfer case, and other “features” that make it the most off-road capable as delivered by the factory.  We liked the copper/bronze color, as it would go nicely with the paint scheme on our bus, but I am also partial to the canary yellow as it would be the most visible if we were broken down in some remote place.

A new Jeep Wrangler Unlimited would be a big purchase for us but no more expensive than buying a used one as they appear to hold their value better than most vehicles.  With a new one we can order it just the way we want it, leaving off all of the expensive upgrades we do not want/need (in-dash GPS, entertainment system, etc.) and adding only those that we do want/need (hardtop and suspension upgrade).  New also means a 6-year, 100,000 mile powertrain warranty and a 3-year, 36,000 mile bumper-to-bumper warranty.  David also told us that we can purchase a lifetime bumper-to-bumper warranty for about $3,000.  We will obviously have to do some research on that.

We finally got home around 10:30 AM Home.  Linda added a few more items to her grocery list and went to the supermarket.  I started a load of laundry and then moved a lot of my “stuff” from the dining room to my office.  After rearranging old stuff to make room for the new stuff I settled in at my desk to work on computer/web-based tasks.

Gary was the SLAARC webmaster before me and indicated at breakfast that he was still getting e-mails from the SLAARC reflector and asked that I remove him from the e-mail forwarding on our GoDaddy account.  My focus for the last two years has been getting the WordPress website built and launched so I had never looked at this aspect of our web-hosting account.  I had some familiarity with the concept, however, from the e-mail accounts that are part of our personal domain and sub-domain.  It was fairly easy to figure out how to edit the existing account and add new ones.  Once I was done I e-mailed all of the club members who were affected by the changes and asked them to review them.  I will check for replies tomorrow and then send test messages.

I got an e-mail from Linda at BCM with the SD version of the March 2015 digital issue attached.  I logged in to the website and downloaded the HD version.  This issue is two months late, the latest it has been since Gary took over the magazine in October 2012, due in part to yet another change in editors that did not go smoothly.  The magazine has been at least a month late for a year now and is slipping farther out rather than closing the gap.  The sad reality is that the magazine does not have enough subscriber base or enough advertisers to be sustainable and Gary is not able to pay enough to get an editor who can/will put out a quality magazine once a month.  But he has not shut it down yet so I will continue to work on articles.  I don’t get paid for my writing and photography.  It’s a hobby and I like it that way as I am not obligated to do anything and I can make my own ground rules.

John and Diane Rauch arrived at 5 PM to visit and have dinner.  They are our longest/best Michigan friends and we always enjoy visiting with them.  They also have two children who went to school with our kids and now have children of their own.  Diane is an educator and is retiring at the end of the school year after a long career as a high school English teacher.  Naturally, our conversation had to do with retirement, travels, and family.

Linda used our outdoor grill to roast marinated potatoes and cook veggie-fruit kabobs.  John and Diane brought a nice Riesling from Woodcreek that we enjoyed before dinner.  We opened a bottle of our 2009 Egri Merlot to serve with the meal and had Biscotti cookies and vegan chocolate “ice cream” later for dessert.  Linda and Diane got a new online game configured on Linda’s iPad and got several things straightened out on Diane’s iPad.  They headed for home around 10:30 PM as it’s a half hour to get back to their house which is only a few minutes from our previous home.

We stacked the dishes in the sink and left any further cleanup for tomorrow.  We tried to watch the 2nd episode of the 1st season of Sherlock (PBS) but either the DVD was damaged or there is something wrong with our player.  The disc was obviously scratched so that may have been the cause, but I want to rule out a defective player.  We have another one in the basement that I will use to test the disc.  If the player needs to be replaced new ones are relatively cheap and I will get one that can also play Blu-Ray discs.

 

2014/11/03-09 A Week at Home

Leave a reply

Note:  There are no photographs for this consolidated post.  Sorry.  🙁

2014/11/03 (M) Getting Ready

Linda was up early and off to the bakery.  I got up an hour later and had some raisin toast for breakfast.  Whenever I have had time since I got home on Friday I have been working on the project list for our bus.  I worked on it some more this morning but eventually had to set it aside while I made some phone calls, tried to deal with an issue with Linda’s Samsung laptop computer, and got documents ready to upload to my Dropbox for a meeting on Wednesday afternoon.

I called Bill Jensen, the national service advisor for conversion shells at Prevost Car Inc., but his voice message said he was unavailable indefinitely and gave alternate contact info.  The main contact was Kevin Laughlin so I called him.  I described the shorter ride height linkage and the downward pointing position of the ride height valve lever arm in its neutral position.  He agreed that neither of these seemed right.

I called Prevost and ordered a new ride height valve and two CX-96 (Gates) drive belts for the OTR air-conditioning compressor.  I then called Martin Diesel in Defiance, Ohio and made an appointment to have the diesel generator in our coach serviced on the 20th and 21st if needed.  I also needed to call Webasto technical support but did not get that call made today; maybe on Wednesday (or Thursday).

Linda’s Samsung laptop suddenly decided to turn the screen brightness down and she has not been able to turn it back up.  It’s bright enough to see in somewhat dim conditions, but still uncomfortably dim for general office use.  I did a Google search and found that lots of other folks had encountered the same problem and had advice on how to fix it.  I shared several links with Linda but she could not get it to work.

I put the finishing touches on the FMCA Freethinkers Associate Chapter’s financial statements, roster, and minutes of last year’s’ meeting.  I uploaded them to Dropbox and e-mailed the chapter members that the materials where there.

Linda got home later than usual from the bakery so we decided to go to La Marsa in Brighton for dinner.  It’s our favorite local restaurant but was more crowded than on a regular Monday due to the buffet they have the first Monday of each month and we had to wait about 20 minutes for a table.  We ordered the almond garlic Ghallaba from the menu, one of our two favorite vegan dishes, but it was not as good as usual.  Not bad just somewhat flat, as if they had left out the garlic.  It was 8:30 PM by the time we got home and we turned in for the night fairly quickly.

2014/11/04 (T) Election Day

Linda did not go into the bakery today.  We spent much of the day together and this is what we did:

  • Had raisin toast for breakfast with Orange juice and banana…
  • ..
  • Got passport photos at Rite-Aid in Brighton…
  • Went to Panera for coffee…
  • Drove to Dearborn for dental hygienist appointments…
  • Drove back to Farmington Hills where we went to McDonald’s and had French fries for lunch…
  • Drove a mile to the Henry Ford Health System Columbus Center in Novi for flu shots…
  • Drove back home where we had a few chips and hummus for an afternoon snack…

I drove to Brighton Honda for a 3:30 PM appointment to have the Element’s recalled air bag serviced.  The appointment took 45 minutes by which time the traffic was really bad.  Because of the combination of rush hour traffic and the ongoing re-paving of Grand River Avenue just west of the dealership a left turn was going to be near impossible.  I needed to get to Latson Road and Grand River Avenue so I made the easy right (and correct) turn out of the dealership and quickly got on I-96 westbound.  I took the relatively new Latson Road exit and stopped at Walmart to stock up on ICE brand water.  I went to Meijer’s for a Mega-Millions lottery ticket and then to O’Reilly’s Auto Parts for two more 12VDC duplex power outlets.  It was still raining lightly, as it had been for most of the day, so I returned home by way of Grand River Avenue and Hacker Road which kept me on pavement for most of the trip.

Linda heated up the leftover chili for dinner.  She continued to try different things to get her Samsung laptop to allow her to adjust the screen brightness and return it to normal but nothing worked.  I took a little time to update WordPress websites and tweak the Wordfence login security.  We then filled out and printed our passport renewal applications and got them ready to mail.  We also figured out how to create, share, and synchronize multiple calendars on multiple devices so that we can now see the same information on our laptops, tablets, and smartphones.  It’s all about Google.

Linda was tired and needed to get up early but something had broken on our bed foundation and needed to be fixed, if only temporarily.  We are still using the plastic foundation that came with our select comfort air mattress years ago and one of the cross members that carry the load to the side rails had come loose from the interlocking top platform and dropped down.  We had to get the mattress off the bed to work on the platform.  We got it put back together for now, but we need to get a box spring or other foundation to replace it.  That probably won’t happen until spring.

2014/11/05 (W) The Day After

Yesterday’s election results were generally as predicted, so nothing to cheer about from our point of view, but the world did not come to an end either.  Elections change very little in the short-term and the daily tasks of living continue regardless of who does or does not get elected.  We were happy, of course, that Gary Peters won the U. S. Senate seat and that Debbie Dingle was elected to the U. S. House of Representatives.  We were especially pleased that our friend, Brian Robb, won re-election to the Ypsilanti City Council and that Richard Bernstein was elected to the Michigan Supreme Court, but saddened to learn that Casandra Ulbrich failed in her attempt to get re-elected to the State Board of Education.  And so it goes with American politics.

Linda was back at the bakery today reviewing the period accounting and continuing to answer questions and monitor the use of the new software.  I took care of some e-mails and then headed to the Brighton post office to mail our passport renewals.  I refueled my car at Meijer’s for $2.899/gal and then stopped at Bed, Bath, and Beyond to exchange two Sodastream CO2 cartridges.  BB&B is in the same strip mall as the Panera, so I stopped in for some coffee.

When I got home UPS had already delivered my package from Prevost.  I took the trash can to the street first and then I opened the box and verified the contents.  I installed one of the Sodastream cartridges but the display would not reset.  The unit has an LCD display so I figured it had a battery hidden somewhere.  I released a clip at the top of the display and the whole display module came out with the nickel-sized battery was installed on the back side.  I started to remove it and the display changed, so I figured it needed a new battery.  I did not think we had any of this type of battery in the house but Linda told me later that we did.

I had not backed up all of my photo files from last week so I spent some time in the early afternoon copying files from my camera to my laptop and then from my laptop to both of our NAS units.  I printed off all of the documents I needed for the FMCA Freethinkers Associate Chapter annual meeting and was responding to an e-mail when Tony and Mark from GSI showed up to install the new natural gas fireplace logs and hookup the new natural gas outdoor grill.

Tony and his wife own GSI but he had Mark install the fireplace while he worked on the grill.  He installed the new disconnect but when leak testing discovered that there was a small leak on the output side of the shutoff valve.  I had to shut off the gas supply to that branch circuit, which also supplies gas to the kitchen range and the fireplace, so he could work on it.  Tony removed the new disconnect, installed a new valve, and reinstalled the disconnect.  I turned the gas supply on and he retested for leaks but did not find any.  He suggested that we run it for a while to burn off manufacturing oils and other things that initially produce odors and can affect the taste of foods cooked in the unit.  I got the stainless steel heat diffuser and two cast iron grills and set them in place.  The left burner lit easily using the battery powered piezoelectric igniter and the right grill lit easily from the left one.

Linda got home at 3:30 PM while Tony and Mark were still working and took over interacting with them while I got ready for our 4 PM telephone meeting.  She got instructions on how to light/operate both appliances, paid them, and then joined me for the meeting.  By 4:05 PM we had 14 “F” numbers represented, safely exceeding our quorum requirement of 10, and Bob Pelc called the meeting to order.  The meeting was friendly but efficient.  We conducted all of the necessary annual chapter business and adjourned at 4:42 PM.  I was re-elected to another 2-year term as chapter secretary but did not run for chapter vice-president, the position I have held since the chapter was formed in June 2010.

After the meeting Linda shut off the outdoor grill and we sat in the living room monitoring our fireplace logs and discussing dinner options.  As a result Linda decided to make waffles.  She tried a different recipe and substituted pastry flour instead for regular flour.  Neither of us understand the difference, at a food chemistry level, but she apparently invented/discovered something that will stick to Teflon-coated cookware; really, really tightly. The waffles were crispy and tasted fine, once we got them out of the waffle iron, but they would not have won any prizes for presentation.

We spent a couple more hours after dinner sitting in the living room letting the firelogs operate with the flue opened a bit.  Tony and Mark said it can take up to 20 hours of use for the unit to stop producing odors and suggested that we operate it with the flue slightly open while breaking it in.  The logs are a non-vented design, just like a kitchen range, which means they are designed to operate without being vented to the outside yet not produce harmful combustion by-products such as carbon monoxide.  At 8:50 PM I turned the logs down to their lowest setting.  Linda shut the unit off at 9:15 PM (it has an On/Off/Remote switch but we do not have a remote).  The pilot light does not consume enough air or produce enough heat and combustion by-products to be a safety or economic concern, so I left it on, closed the flue, and went to bed.

2014/11/06 (R) Inductive Thinking

Linda left the house before I awoke and spent a long day at the bakery.  I spent most of the day at the dining room table working at my computer.  I typed up the draft minutes from yesterday’s FMCA Freethinkers annual meeting, generated PDFs of the chapter’s financial reports, uploaded files to the Dropbox folder, and reorganized it.

I took a break at noon and drove into Novi to have a look at Chuck’s latest bus projects and then go to lunch at the local Leo’s Coney Island.  The new wedge cabinet and Corian top look and fit great between the end of the new couch and the kitchen base cabinet.  He did a nice job replacing the outside Jenn Air electric cooktop/grill, which was mounted in a pull-out tray in one of the bays, with two Indufix 2-hob induction cooktops.  The tray has an open bottom and is supported by four heavy duty extension slides, two on each side.  The induction units are from Germany and came with European “208VAC” plugs.  They are strictly 208/240 VAC devices and do not have a neutral connection.  The wire colors are also different with brown and blue for the L1 and L2 (hot, load) and yellow/green for the ground.  Chuck had an addendum sheet explaining the color codes and how to match them up to the U. S. standard.

For lunch I had a small Greek salad without feta cheese and an order of French fries.  Chuck had a more substantial meal with a salad, chicken on skewers, and rice.  I was back home by 3:00 PM and settled back into my computer-based work.

Linda got home around 6:15 PM and made barbecued tofu sandwiches with grilled onions and corn on the cob.  We washed it down with Leelanau Cellars sweet Red Table Wine.  It was labeled semi-sweet but it reminded me of the King of the North wine from Red Trail Vineyards in North Dakota which had a distinctly grape juice taste.  I liked it and Linda said she did too, which surprised me a little, as she tends to like dryer red wines.

After dinner Linda read and played online word games on her iPad to the warm glow of our new natural gas fireplace logs.  These logs are a high-efficiency, unvented design and actually through heat into the living room rather than up the chimney.  I continued reformatting the Freethinkers chapter roster, uploaded it to my Dropbox, and e-mailed the members to let them know it was available and ask them to review their listing and get back to me with corrections.  RVillage had notified me that someone wanted to join both the CCO and GLCC groups so I logged in and approved those.

I discovered the other day that Wordfence will allow me to block individual IP addresses so I would like to find the time to go back through the “User Locked Out” notification e-mails and enter some of the most egregious repeat offenders.  But not tonight.  It’s late, Linda is already asleep, and I’m tired.

2014/11/07 (F) 50% plus

My objectives for today were the following:

  • Finish up yesterday’s blog post and start working on today’s…
  • Read a few of the blogs I follow in Feedly (I am way behind)…
  • Move the spare Aqua-Hot from the garage to the library…
  • Move any other freeze sensitive items from the garage to the library…
  • Finish the drywall compound work in the library…
  • Call Webasto technical support…
  • Measure the inside of the Honda Element…
  • Buy plywood to build the storage divider for the Element…
  • Start building the storage divider for the Honda Element…
  • Use the blower to clear the leaves from the deck and planting beds….
  • Prepare the FMCA Freethinker annual chapter certification paperwork…
  • Select a few photos to go with blog posts going back to early October…
  • Start uploading blog posts to our website…

That was obviously more than I could possibly accomplish in one day, but it helps to write it down.  Here is how I did…

  • Finish up yesterday’s blog post and start working on today’s…check.
  • Read a few of the blogs I follow in Feedly (I am way behind)…check.
  • Move the spare Aqua-Hot from the garage to the library…check.
  • Move any other freeze sensitive items from the garage to the library…some.
  • Finish the drywall compound work in the library…check.
  • Make an unplanned trip to Lowe’s and Sherwin Williams for paint supplies…Yes.
  • Prime the areas in the library where the drywall work was done…Yes!
  • Call Webasto technical support…check.
  • Measure the inside of the Honda Element…check.
  • Buy plywood to build the storage divider for the Element…no.
  • Start building the storage divider for the Honda Element…no.
  • Use the blower to clear the leaves from the deck and planting beds….no.
  • Prepare the FMCA Freethinker annual chapter certification paperwork…no.
  • Select a few photos to go with blog posts going back to early October…no.
  • Start uploading blog posts to our website…no.

That’s 6-1/2 + 2 out of 13 + 2 or 8-1/2 out of 15 which is over 50%; not bad.  I might have gotten one or two other things done, or at least started, but we ended up meeting Chuck at BD’s Mongolian Bar-B-Que in Novi for dinner at 7:00 PM.  Barbara was still attending to out-of-town family business and Chuck appreciated not dining alone.  We were at the restaurant for over two hours and had a nice meal and great conversation in spite the very loud, upbeat youthful vibe of the place.  Next time we will try Sizzling Sticks in Northville; same kind of food but a much more subdued atmosphere according to Chuck.  Overall it was another good day.

2014/11/08 (S) Steve and Karen

We had a good sized crowd at the ham radio breakfast this morning.  We did not have to be anywhere at any particular time, and we were enjoying the conversation, so we stayed a little longer than usual.  Once we got back to the house I changed into work clothes for drywall and painting while Linda gathered up the recyclables and finished her grocery list.  She left to run the errands and I got the painting tools/supplies out.

Linda dropped off the recyclables, stopped at the bank, stopped at Lowe’s to return something that it turned out we had not purchased there, and then did the grocery shopping at Meijer’s.  While she was gone I put a first coat of paint on the areas of the west wall of the library where I had repaired the drywall.  The item she planned to return was a can of Great Stuff Fire Block that broke yesterday when I tried to use it.  It turned out that I had not purchased it at Lowe’s as they do not sell it.  They sell a 3M product for the same application, which I had sitting in the garage but had overlooked.  I used it to try to fill gaps around the gas supply pipe and the condensate drain, which were open clear through to the outside, and the double-walled flue pipe and gas pipe that pass through the furnace closet wall.  I applied the foam from inside the furnace closet and will need another can to finish the job from the outside of the closet.

Linda started putting together supper while I gathered up laundry and started a load.  I spent some quiet time with Jasper, our very sweet 10-year old cat, and then settled in to write and read for a while.

Steve and Karen arrived at 5 PM and we visited while Linda put the finishing touches on dinner.  She made the warm Farro dish with kale, dried cranberries, almonds, garlic, and onions and roasted asparagus as a side.  She has the Farro dish tagged “good for company.”  We still have a few bottles of the 2009 Egri Merlot and the slightly sweet full body of this wine went very nicely with the earthy Farro.  She made a chocolate cake for dessert with raspberry sauce made from fresh raspberries.  I think the cake was her best yet; very moist with just the right texture.  Vegan baking is tricky and Linda is still figuring it out.  Sometimes the cakes are a bit dry and other times they lean towards being brownies but tonight she got it just right.

Steve brought his Raspberry Pi single board computer (SBC) and an SD card with photos of their recent (September) trip out west.  He connected the Pi to our TV/monitor in the basement so we could all comfortably see the photos.  They had excellent weather and some fall colors the days they were in Yellowstone National Park and got some nice images.  But we spent most the evening sitting in the living room enjoying the new natural gas firelogs and catching up on what we had been doing since we last saw each other.  They left around 10:30 PM and we had everything picked up by 11 PM and headed off to bed.

2014/11/09 (N) Wrapping Up

Today was mostly about wrapping up the library drywall/painting project and other minor chores, doing laundry, and getting me packed for a two week return visit to Twelve Mile, Indiana to work on our bus and help Butch and Fonda work on theirs.

Linda made blueberry pancakes for breakfast, which is always a treat.  I made a trip to Lowe’s for a nine inch disposable paint roller cover and another can of 3M Fireblock spray foam.  I used the can of spray foam to finish sealing the gaps in the utility closet wall openings where the black iron gas pipe and the double-wall flu pass into the garage.  I only needed a little more foam to finish the utility closet openings so I used the rest of the can to fill gaps around the rear entrance door in the garage.

I used some scrap packing paper from recent Prevost shipments and some frog tape to mask the opening for the library furnace return air grille.  I then used flat black spray paint to make everything that is visible through the slots in the cover disappear.  Finally, it was time to paint walls.

I used a small brush to cut in the adjacent wall and ceiling with the Sherwin-Williams Extra White satin finish paint.  I removed the cover plates from two outlets and a switch and then rolled on a new/final coat of paint.  I cleaned up my paint supplies and then we brought the outdoor grill (and cover) into the garage to store for the winter.  We also brought the patio table umbrella and base into the library and set the umbrella in the base for the winter rather than let in lie on the floor.

Linda made another batch of granola while I checked stuff on my computer and took care of laundry and packing.  We had leftovers for dinner at 5:15 PM and then headed to South Lyon for the monthly SLAARC (ham radio) meeting where I was re-elected as VP for a second year and Linda was elected Treasurer for the coming year.  The program was a presentation on Software Defined Radios (SDR) by Mike Alexander (N8MSA).  When we got home we finished the chocolate cake and raspberry sauce with a glass of Leelanau Cellars Autumn Red wine and then turned in for the night.

 

2014/09/22 (M) Hot Water

Leave a reply

Linda was up early to beat the morning traffic heading into Detroit from our part of S. E. Michigan.  On days when she has to go to the bakery she likes to get up and go and does not have breakfast at home.  Not that she doesn’t get something to eat; she’s spending the day working at a bakery after all.

I tend to stay up later at night than she does, so I also tend not to spring out of bed at oh-dark-thirty unless I have someplace I have to be at daybreak.  My job is to hear the alarms (we set several) and make sure Linda wakes up.  I am then free to pursue the rest of my day on my own timeline.  Today, however, I wanted to make sure I was up and dressed not later than 8 AM as there was a possibility that TOMTEK would be here to convert the hot-water base-board heating system boiler from propane to natural gas and/or that D. R. Electric Appliance would deliver and install our new natural gas kitchen range.  I did not, however, know if/when either of those things would happen so I was “stuck” at the house all day either waiting for phone calls.

I was dealing with e-mail when Tom called at 9:15 AM to let me know they had the part for our boiler and that he could be at our house around 10 AM if that was OK.   “Absolutely!”  I decided to bleed out whatever propane might be left in the 1/2″ line that feeds the kitchen and outdoor grill connector.  The pipe into the house was open to the outside for a while so I did not know how much propane, if any, even remained in the line.  I opened the shutoff valve in the laundry room for that line and then opened the outside valve for the gas grill.  Nothing.

It turns out that the quick-disconnect is a self-sealing device.  When the mating part is not plugged in, no gas can get out.  I should have known that, and it’s obvious that it should work that way, but I hadn’t really thought about it until that moment.  I closed the outside valve and then closed the shutoff valve in the basement and figured I (or the installer) would deal with that branch of the piping when the new range shows up.  I did not concern myself with the pipe to the furnace, which has its own shutoff valve, as I figured Tom would bleed the line before he started the unit.

Tom arrived about 10:20 AM.  He had the right part and he knew how to replace it.  The part (an orifice plate) was just a thin piece of metal, probably aluminum, with a hole about the size of a quarter in the center of it (the orifice) and several other holes for screws to pass through or other purposes.  I’m always trying to understand our technology and he let me observe and ask questions while he worked.  Tom disconnected a small vacuum hose, removed three or four screws, lowered the blower housing, slid the old propane orifice plate out, slid the new natural gas orifice plate in, reattached the blower housing, and our boiler was converted to natural gas.  Just like that.

Once he had the new natural gas orifice plate installed and everything reassembled he put gas to the furnace and turned on the electrical power.  It took a few seconds to purge the air and residual propane from the gas pipe but the burner lit and stayed lit on the first try.  He checked for gas leaks as it warmed up.  (He used an electronic sniffer rather than soapy water.)  He did not find any gas leaks but I noticed some condensation dripping from the flue pipe onto the top of the unit.  He shut the furnace off and let it cool down enough to handle the flue pipe and found that a joint between two sections was leaking.  He pulled it apart, applied a sealant, and put it back together nice and tight.  He turned the furnace on again and the leak did not reappear.  We did notice, however, that there was a similar leak at the next joint downstream.  I moved a spare macerator pump from under that joint and put a bucket there to catch any drips, although stains on the underside of the flue pipe indicated that this leak had existed for a while and that condensation leaking at that point had run back downhill towards the boiler along the underside of the pipe.  We may need to eventually have all of the joints resealed all the way to the outside.

I turned all of the thermostats on and set the temperatures a few degrees above ambient so they would call for heat and Tom monitored the temperature and pressure of the coolant as the unit heated up.  At 140 degrees F the pressure was between 35 and 40 PSI.  Tom said it should be closer to 20 PSI at that temperature, so he drained some of the coolant out of the system into a bucket.  As water trickled into the bucket the pressure dropped accordingly. The system eventually heated up to just under 180 degrees F, which is where it normally operates, and the pressure stayed below 25 PSI.  He put the covers back on the unit and gathered up his tools while I wrote a check and paid him for the service call. After he left I took a nice hot shower, the first one since last Wednesday morning.  ;-0

While I was doing chores around the house I got a call from Marilyn in the AT&T billing department.  She called to let me know that they were crediting our bill to compensate for the lack of usable service in August.  I got a call later from Shelley from the Office of the President (of AT&T) following up on our MPSC complaint.  I told her that the POTS and DSL had been working just fine since Bill was here to repair our service.  She had requested the billing credit and said she would report back to the commission that everything was repaired to our satisfaction.  I told her I would confirm that if contacted by the MPSC.

Today was shaping up to be a very good day.  It was sunny outside with light winds, puffy clouds, and afternoon high temperatures in the low 60’s; a little brisk, perhaps, but cheerful and very refreshing.  Earlier in the day I noticed the road grader going up and down our street smoothing out the bumps and filling in the holes.  With a forecast of no rain and high temperatures in the mid-to-upper 70’s for the next week the road should be decent to drive on for a while.

Some of the difficulty we have had this summer getting contractors to show up reminded me of a joke that Steven Wright told years ago on an HBO comedy show.  It went something like this:  “I walked up to the deli entrance and the sign said ‘Open 24 Hours’ so I tried the door but it was locked.  While I was standing there the owner walked up and unlocked the door.  I said to him ‘Your sign says ‘Open 24 Hours’.’  He just looked at me and said ‘We are, but not in a row’.”

I’m starting to wonder if the kitchen range is going to turn out to be another example of “tell the customer whatever you think they need to hear to get them to make the purchase.”  The difference in this case is that we have not given D. R. Electric Appliance a deposit or a credit card number, so if delivery is delayed much longer we can walk away from the deal with nothing to lose except time.  We probably won’t, as that would just further delay getting a new NG range, but it’s nice to know that we at least have that option if this drags on any longer.  We were told “three days” and based our decision to order from them in part on that information.

With respect to the conversion or our generator from propane to natural gas, our new NG fireplace logs, and our new NG outdoor grill, our hands are basically tied.  We either have parts on order, for which we have already paid, don’t have a choice of contractor, or have made the choice not to look for another contractor as that would simply involve more delay and the uncertainty of working with someone we have not worked with before.  Still, it’s a little frustrating that we can’t get this stuff taken care of.  The real issue for me is that I need to take our bus to Butch and Fonda’s place to work on it, and I cannot do that until all of the natural gas related work is done.  The other issue is that we do not want to contact Consumer’s Energy (natural gas) and AmeriGas (propane) until all of our gas appliances are switched over.  Consumer’s Energy “requires” us to accomplish this within 30 days of hanging the meter, which occurred one week ago today, so we do not have an unlimited amount of time to get this stuff taken care of.

Interestingly, I learned at breakfast on Saturday that two of our ham radio club members had contacted Bratcher Electric based on my recommendation.  Mike had already been to one of their houses, quoted them a whole house generator installation, gotten a signed contract and a deposit, and given them an installation date.  The other guy had a scheduled appointment for Mike to come out and give him a quote.  Mike looked at our job five weeks ago and I don’t have a price or a service date scheduled yet.  What’s up with that?!  I did not want to spoil today’s winning streak, however, so I chose not to make follow up phone calls today.  Tomorrow morning, however…

We were both tired and turned in early to watch episode 2 of Ken Burns “The Roosevelts: An Intimate Portrait.”  I was putting the finishing touches on this post afterwards and noted the occurrence of the autumnal equinox at 10:39 PM EDT.

 

2014/08/15 (F) On The Level

Leave a reply

I got dressed this morning for physical work, but ended up doing very little.  I worked at my desk most of the morning, including working through the first chapter of the Intro to Linux course on edX.  I came up from the basement to have lunch at 12:30 PM after which I moved my car out of the pull-through driveway.  I then started the bus and, with Linda’s assistance, backed it out of the pull-through driveway, drove it the short distance to our straight driveway (which ties into the other end of the pull-through driveway), pulled it up onto the concrete driveway as far as it could go, and parked it.  The concrete driveway runs uphill from the road to the garage and, not knowing how long it might be there, I lowered the front end and raised the back end; not enough to level it but enough to make it better.  Linda chocked the drive tires while I hooked up the electrical shore-power.  The front bay had gotten water in it from the recent rains so we opened all of the bays to let them air out while Linda soaked up as much water as she could with a couple of old towels.

Spreading 21AA road gravel to fix the driveway.

Spreading 21AA road gravel to fix the driveway.

I got out our 8′ step ladder and pole saw/lopper to prune some large (1 – 2 inch) dead branches that were hanging over the pull-through driveway where the rear end of the bus normally sits.  I no sooner started this work when Phil from Precision Grading showed up right on time with his dump truck, tracked front-loader, and rolling compactor attachment to repair the damage done to the pull-through driveway by the recent landscaping work.

Phil off-loaded the front-loader from the trailer and then disconnected the trailer from the dump truck.  He had a small load of 21AA road gravel (with lots of fines) that he dumped in two different spots in the pull-through driveway.  He then put the truck back in the street and set up his laser level to see just what he needed to do.  He used the front loader to move the gravel around and distribute it evenly and finished by back blading it with the bucket to level it.

Rolling and compacting the driveway.

Rolling and compacting the driveway.

Once he had the gravel the way he wanted it, he removed the bucket and attached the vibrating roller/compactor.  He went over the driveway several times, always making his final pass going backwards while pulling the roller to smooth out the tracks created by the machine’s drive treads.  The roller/compactor worked the fines down into the base and by the time he was done the driveway looked and felt tight; even better than last year when Phil did not yet have this attachment.  The machine also shook the entire house, especially the rear deck which is mostly supported by tall 6×6 and 4×4 posts.  He indicated that we did not need to wait for rain, or anything else, before putting the bus back in its spot, so after he left that is what we did.

But before Phil left, he used his laser level to check the grade in the back.  Although it does not appear to the naked eye to drop very much in the first 70 feet, the laser level indicated that there was a steady down slope over that distance with a total drop of over 1 foot.  He checked all the way to the edge of the cattails marsh, at which point the ground was down 4-5 feet from the deck.  The surface of the neighbor’s pond looks to be at least two feet lower from there.

The compacting roller really makes a difference.

The compacting roller really makes a difference.

There are several implications to this.  For one, it means the surface of the pond is well below our basement slab (6 – 7 feet) and at least 2 feet below the bottom of the footings for our house, so it is probably not the source of the water that runs into our sump.  It also means there is adequate grade to allow surface water to run off once the grass grows in (although it would be better if there was more grade than there currently is in the first 50 feet).  Equally important, the grade is more than adequate for a very effective French drain should we decide to have Phil pull up the existing drain lines and replace them.  Finally, having a hole dug at least 8 feet deep for the ham radio tower base should not pose a problem as the starting elevation is at least 6 feet above the basement slab.

With regards to the tower base, Phil suggested that I have the rebar cage, mounting bolts, and alignment structure built ahead of time and ready to go.  He could dig the hole first thing in the morning with his mini-excavator (up to 8’ deep) and figured it would only take an hour at most.  The assembled rebar could be positioned, plumbed, and secured in an hour or so, and the concrete could be delivered and poured in the late morning.  He indicated that spreading the work out over more time than that, especially letting the hole sit overnight, was not a good idea

Close up of the compacting roller attachment. This thing shook the whole house!

Close up of the compacting roller attachment. This thing shook the whole house!

We discussed how to get the concrete into the hole given its location about 40 feet northeast of the northeast corner of the house.  Our two options appear to be the little dump carts or a pumper.  The carts would have to drive up the east side of the house between the house and the septic tanks, but Phil thought that would be OK as long as they put down plywood to drive on.  He said a pumper truck would be very expensive but that a separate pump is available that can be towed to the job site.  With that equipment the concrete mixer truck would simply unload the concrete into the pumper, which would then pump it to the hole.  Both the truck and the pumper would be in the east end of our pull-through driveway.  Phil suggested that I call Carl Russell in Byron, Michigan as he is a good concrete guy and probably has a concrete pump.

After Phil left we reversed our earlier steps and moved the bus back into the pull-through driveway.  It rolled right up onto the level pad area and did not leave any noticeable tire tracks.  Nice.  We hooked up the “50 Amp” shorepower cable, turned off the chassis batteries, checked that all of the battery chargers were working, and shut/locked everything.

While Phil was working, Linda went to the Howell Library to return children’s books and came back with a card for the Howell Melon Festival.  The Festival started today and runs through Sunday.  She wanted to go walk around so we skipped dinner and headed out around 5 PM.  At the first turn in our road we encountered two workers from Roese Construction.  They were working on installing the natural gas main line down the street and said another crew would be coming along behind them in 1 – 2 weeks doing the branch runs up to the meters on the houses.

The Howell Melon Festival was just getting started when we got there but parking was already at a premium.  We parked a few blocks away in an empty church parking lot.  Some of the smaller side streets were already blocked off but Grand River Avenue and Michigan Avenue were both still open to traffic.  They will be closed tomorrow and Sunday and filled with vendor booths.

The weather was perfect and all of the downtown restaurants were very busy with lots of outside seating.  In the 16 months we have lived in the new house we have never really visited most of the downtown Howell merchants.  We went into Country Squire, a business that sells fireplace logs and inserts as well as outdoor cooking grills.  They had a couple of natural gas fireplace logs that were 99%+ efficient and did not require the flue to be open.  We thought they were a bit pricey but they were actually capable of heating a room.  We don’t use our existing propane logs because they are mostly decorative and require the flue damper to be open, which just wastes fuel and money.  The Country Squire also had a couple of natural gas grills that would mount to our deck and attach to our existing quick disconnect.

We walked through the food vendor area but did not see anything that interested us.  After walking past the starting gate for the Howell Melon Run we ended up at Uptown Coffee, on the northeast corner of Grand River and Main, where we had some brew and Sabra hummus with pretzel chips.  We started back towards our car and paused at the Old Courthouse long enough to hear the first number by the band.  They sounded good and not too loud.  We had our folding camp chairs in the car but decided to pass on the concert.

We stopped at Walmart on the way home to buy a microwave popcorn popper bowl and stock up on flavors of ICE brand sparkling flavored water.  Meijer’s sells a few flavors but Walmart has the broadest selection, including my two favorites (pineapple-coconut and blueberry-pomegranate).  Our final stop was at Lowe’s for a 100-pack of bright orange marker flags.  I will use these to mark the powerline that runs under the driveway to feed the RV outlet, the propane line to the house, the drain pipe from the corner of the house into the first septic tank, and the drain pipe that connects the outlet of the second septic tank to the beginning of the drain field.

It was a long day but a good one.  We watched another episode of Doc Martin and then called it a night.