Tag Archives: Gary Hatt (BCM)

2015/01/8-14 (R-W) Q 2015 W2

2015/01/08 (R) Up On The Rooftop 

A panorama from the roof of our bus.  Left edge is NE, center is S, right edge is NW.

A panorama from the roof of our bus. Left edge is NE, center is S, right edge is NW.

As forecast, we woke up to cloudy skies and milder temperatures.  The clouds to the southwest looked like they might produce rain but the winds were blowing gently from the southeast so the rain would not be for us.  This was the day we’ve been waiting for, the perfect kind of weather for washing a bus.  But not first thing in the morning.  Coffee and breakfast come first while we wait for slightly warmer temperatures.

The waste water tank level sensors are not accurate but our fresh water tank sensors are OK.  The fresh water level gauge was showing less than 1/3 tank and the grey water tank gauge was showing full so it was probably time to dump and fill.  When I checked the fresh water level visually we were at 1/6th tank.  I dumped the black water tank and then the grey water tank, both of which were fairly full, and then filled the fresh water tank.  I have the city water regulated to ~50 PSI (static) which drops to ~30 PSI when the fill valve is fully opened.  At that pressure it takes about 40 minutes to fill the tank.

I last dumped the waste tanks on December 30th and added 25 gallons of (hard) fresh water.  On December 31st I added another 30 gallons of (hard) fresh water.  On January 2nd I recharged our water softener, drained about 1/6 tank (~20 gallons) of (hard) fresh water and filled the tank with 120 gallons of soft water.  I checked the hardness of the water coming out of the softener after that fill and it was 1.5 grains/gallon (25 ppm).  I checked it again after today’s fill and it was still 1.5 gpg.  Since we are keeping a log of the dumps and fills I plan to check the hardness after each fill so can regenerate the water softener before it gets depleted and we end up with really hard water in our tank and system.

Butch happened to be at the Post Office Annex today checking the P. O. Box at exactly the same moment a postal worker was about to put something in the box and then stopped because of the forwarding tag.  The “something” was our package of water hardness test strips from Bristol, Indiana and the worker was kind enough to give it to Butch to give to us.  He also learned that they still have P. O. Boxes available so he went to the main post office to find out more about that.  He came back with a form to fill out and it had room for all of our names so the six of us are going to share the box and the cost, which is $56 for six months, or just under $20 per couple.

While the fresh water tank was filling I started getting ready to clean the roof by getting out our Little Giant step/extension ladder and various cleaning supplies.  The dump and fill was done by 11 AM and it was warm enough by then to start working.  Swim trunks, a white T-shirt, and Kean sandals was the uniform of the day.  I carried the hose sprayer up the ladder with me and then lowered it down to use as a hook and lift wash water bucket, scrub brush, and other paraphernalia up to the roof.

It turned out to be sunnier than I had hoped but I worked for about four hours, not including a lunch break, and scrubbed the entire roof.  I used McGuire’s red automotive soap and rinsed thoroughly.  I had already washed the roof once using Dawn dish soap (a big ‘no no’, apparently) and a long-handle soft brush.  That washing had removed surface dirt and revealed the full extent of the dark “spotting” that gave the entire roof a mottled appearance.  The roof looked a lot better after I scrubbed it but a lot of the spotting remained.

We are anxious to clean the sides of the bus but there is no point doing that until we are done with the roof.  We want the roof “like new” clean so dirt doesn’t run off it onto the sides, but we also want it clean because we are seriously considering having Discount Solar (here in Quartzsite) install solar panels and a charge controller and do all the wiring.  As long as we had the hose, brushes, and soap out we decided to wash the car.  It was even filthier than the bus, if that’s possible, and it was nice to finally have it clean.

After cleaning up our equipment I got cleaned up and then sat and visited with Butch for a while.  Linda came over and announced that she wanted me to take her to dinner.  Butch and Fonda decided to go too so we went to Crazy Jerry’s, which is not to be confused with Silly Al’s.  Silly Al’s is supposedly the #1 eatery in Q, at least for pizza, but they have karaoke every night starting at 7 PM.  Thank you, no.  Crazy Jerry’s also has pizza and we tried the vegetarian, hold the cheese.  Very thin crust (the way we like it) and lots of topping.  A couple of side salads and a side order of French fries.  FWIW, we did not eat the entire pizza and brought home the leftovers.

Linda split a pair of Scrabble games with her brother, the first one he has won in quite some time.  She had an e-mail reply from Mara.  She is camped about 70 miles south of Q and is headed here in the near future and is going to camp with the WINs (Wandering Individuals Network).  I checked e-mail, updated my BCM article spreadsheet with two more story ideas, played a few games, and worked on this post before turning in for the night.  We will have been here a month as of Sunday.

The Hi Jolly Daze Parade.  Quartzsite, AZ

The Hi Jolly Daze Parade. Quartzsite, AZ

2015/01/09 (F) The P. O. Box

I left the ladder setup yesterday so I could check the roof again this morning and determine what additional cleaning measures, if any, I might want to take.  I also wanted to get back up on the roof and measure the space we have available for solar panels.  I was expecting two packages via UPS; one from B&H Photo (Manfrotto nodal panoramic tripod head) and one from Sure Marine Service (Webasto repair parts).  I had a nice view of the mountains surrounding Quartzsite from the roof of our bus and wanted to shoot some panoramas with the new head when it arrived.

Butch, Fonda, Jim, Barb, Linda, and I all went to the U. S. Post Office in Quartzsite this morning to sign up for our very own P. O. Box which means we finally have a way to receive USPS mail while we are here.  Just in time, too, as Q has really filled up in the past week and there is more to come.  I have an FMCA national education committee meeting on Monday and need to write a few items for a member survey and review other materials.  Gary (from BCM) is also due to arrive on Monday, and both Curtis (from RVillage) and Mara Culp (HFH build acquaintance) may be headed this way as well.  I believe Chris Dunphy and Cherie Ve Ard of Technomadia are already in the area.  The big RV tent is up and those vendors are arriving and setting up.

Once we were done at the post office I went to Discount Solar to discuss a possible installation on our coach.  The Kyocera panels are 26.5″ W x 59.0″ L.  They are “12 V panels” but are rated at 140 Watts putting out 7.9 Amps.  They cost $350 each.  Those numbers compute to an output voltage of 17.5 VDC and $2.50/W.  (If a 140 Watt panel was operating at 13.8 Volts it would produce just over 10 Amps.)  Because we have a 24V battery system we would need to install the panels in series-connected pairs.  The preferred installation for the rectangular panels is to have the long dimension lined up fore-n-aft to either side of the centerline of the roof.  Tilt mounts are available ($45/panel) but we would probably not install them due to the difficulty of getting onto our roof to use them.

“12 volt” batteries typically charge at around 13.8 to 14.1 volts.  Our “24V” system charges at 27.6 to 28.2 volts and a series-connected pair of panels produces 7.9 A at 35V (full sun) for 276.5 volt-amps, which is essentially “watts.”  Two pairs would produce 15.8 A (553 V-A), and three pairs would produce 23.7 A (829.5 V-A).  The higher voltage output of the panels is reduced and regulated by a solar charge controller before getting to the batteries.  Discount Solar carries Blue Sky and Trimetric maximum power point tracking (MPPT) controllers and the Blue Sky Solar Boost 50 would handle three series-connected pairs for about $550.  The MPPT controllers are DC-to-DC converters so they convert the excess voltage into additional current.  With full sun this six panel system could supply up to 30 A of charging current at the proper voltage, which is why we would need an MPPT controller that can handle more than 30 A of charging current.  We would also want room for expansion or replacement with higher wattage panels if they were available at some point in the future.  One of the nice things about the solar system is that it would always be on and would “play nice” with our other charging systems. Another nice feature is that they are silent when operating.  Ahhhh.

Because of the size of our house battery bank (400 A-Hr at 24 VDC) and the fact that we have a residential refrigerator, auxiliary air-compressor, and other AC loads, we would need/want at least six panels.  (I have not included the four Group 31 wet cell batteries that are used to start the engine and power the chassis as part of the solar system.)  If the batteries were discharged 50% (200A-Hr) it appears that it would take just under seven hours to bring them back to full charge based on the 30A charging current.  In actuality it would take longer in a boondocking situation as the sky is not always clear, the sun is rarely directly overhead (perpendicular to the panels), there would be devices using some of the energy, and the amount of current the batteries can accept falls off as they get closer to being fully charged.

Installation is $90/hour plus mounts ($15/panel), wire, connecting blocks, and other parts, and would take 4 – 5 hours to complete.  The owner assured me they would have it in and out in one day so we could be back in our parking spot before dark.  The last three weeks of January are the busiest time of year for Discount Solar and since we are plugged-in to shorepower we do not need the solar system right away.  If we have it installed in early February we would have a month to make sure it works and resolve any problems.  The system would cost about $3,300 installed.  We have at least a month to think about it.

When I returned to our coach Linda was out walking.  When she got back I went up on the roof with a tape measure to see if/how the solar panels might fit.  With a four-n-aft orientation we could put two towards the front outside edges, one just aft of the kitchen skylights on the driver side, and one aft of the hall skylight on the passenger side.  We could put two more somewhere in the rear.  The options for the rear appeared to be inline (almost touching) on the driver side starting just behind the bathroom skylight or putting one there and the other one sideways across the back just ahead of the dropped portion of the roof and aft of the bedroom vent fan.  Placing the panels in these locations would leave the center of the roof open so I could climb up on the driver side front and walk all the way to the back.

Barb stopped by to let us know there was a mattress in the house (park model trailer) if we wanted to try it out.  It had been in their rig for about two years until they removed it yesterday and replaced it with a thicker one they got from Connie.   It is a regular queen size mattress about 6″ thick, so not one of the oversized behemoths that have become the norm.  They also had a 1.5″ thick memory foam pad to go on top of it.  We took a look at it and decided to give it a try.

We have been using our old Select Comfort adjustable air mattress in the RV since summer 2013.  One side (mine) has a slow leak so I have to adjust it every other night.  I could live with that indefinitely but what we really dislike about it, and have for a long time, is that we tend to roll into the center or off the edge.  It also takes up valuable storage space under the bed for the pump, has wires and hoses to deal with, and has a controller for each side.  We were definitely ready to try something else so we stripped the bed, disconnected the two air hoses, and carried the mattress out of the bus.  It was surprisingly heavy and bulky for an air mattress and lacking in self-supporting structure, but that also made it easier to bend it around the front passenger seat, down the entry stairs, and out the door.  We stored it in the bedroom of the house trailer pending a final decision about the replacement mattress.

We carried the new mattress in, which was definitely easier than getting the old one out, and got it positioned on the plywood bed platform.  We put the memory foam pad on top and put our mattress topper over that which added another inch.  We put our electric heating pad on and then the sheets and the blanket.  We will try it out for a while and if we like it we will see if the Salvation Army wants the old one.  If not, it may end up at the Quartzsite dump as we really do not have any way to get it home or a reason to do so.  We will leave the pump, hoses, and controllers under the bed until we decide on its final disposition.

The suspension on the bus had settled slightly in the driver side rear since we parked and leveled it almost a month ago.  It would not have been enough to require an adjustment except that our bed sits crosswise with the head on that side and I find that sleeping with my head even slightly downhill is not comfortable.  Rather than start up the main engine we got the Dewalt portable air-compressor out of the car and connected it into the brake system fill port in the passenger side engine bay.  I had to connect the chassis batteries and turn the ignition on (without starting the engine) in order to activate the leveling controls, but that allowed me to raise that corner up and get the coach level side-to-side.  At some point we will re-position the bus, but not until I have completed some work on the turbo boost sensor mounting plate and hose and the level low system components for the front end.

We put the air-compressor back in its special storage divider in the car and decided to rearrange a few things so we could put the rear seat down.  Starting next week we will need to be able to carry a passenger.  We thought about heading down to the market area but remembered that we were expecting UPS deliveries.  I started working on two more articles for BCM instead while Linda went for a walk.  It was warmer today and so it was warmer in the coach and I ended up taking a nap.

Our UPS and FedEx shipments usually arrive late in the afternoon or early evening but had not shown up by dinner time.  I had planned to disassemble the Aqua-Hot burner and replace the bearings, nozzle, and perhaps a few other small parts tomorrow but it now appears that will have to wait until Tuesday, assuming our shipments arrive on Monday.  I will likely need to clean the unit as well, given that it has been running so rich, and that may include pulling the combustion chamber.

Linda made two cold salads for dinner; chickpea and wild rice Waldorf.  Both are favorites of ours, especially in warmer weather.  We had some Barry’s Basic Bread with our meal and another glass of Lamb’s Valley organic sweet white wine was a most agreeable accompaniment.

Yup, that's a real, live camel in the Hi Jolly Daze Parade. These animals are strongly linked to the 19th century history of Quartzsite, AZ.

Yup, that’s a real, live camel in the Hi Jolly Daze Parade. These animals are strongly linked to the 19th century history of Quartzsite, AZ.

2015/01/10 (S) Hi Jolly Daze Parade

Today was the annual Hi Jolly Daze Parade.  As first time winter visitors to Quartzsite there was no way we were going to miss this event.  I was up at 7 AM to make coffee and we were done with breakfast by 8 AM.  We checked the parade route online and figured we would go to the Quartzsite Improvement Association grounds as the parade ended in the parking lot there.  It was scheduled to start at 10 AM so we snagged Fonda about 9:40 and headed that way in the car.

When we got to Central Avenue and Main Street the police had Main Street closed so we could not turn left to get to the QIA.  I stayed on Central down to Kuehn Street and took it east over to the exit 19 overpass and back to Main Street.  On the way we saw Lloyd DeGerald’s motorhome parked along Kuehn with a big banner advertising his Aqua-Hot technician services.  I am hopeful that I will be able to repair both of our burners myself but if not Lloyd is the guy I would call, so I was glad to see that he is in town.  But back to the parade.

The police had Main Street closed on that end too.  We knew the parade started at Plymouth Avenue and Quail Trail so we headed in that direction and parked at the Quartzsite Library.  We were surprised that no one else was parked there as it was a short walk from there to the start of the parade route which turned out to be an excellent spot from which to view the parade.  What we realized after we got there was that the west side of Plymouth Avenue was lined with cars from the starting point all the way to Main Street.  I suspect that Main Street was similarly lined with people, most likely in cars, but we were not able to observe that directly.

We had a few drops of rain leading up to the start of the parade.  There were plenty of grey clouds around, but the sun was also shining and the parade did not get rained out.  In fact, a full 160 degree rainbow formed behind the parade and lingered until most of the participants had passed us.  The highlight of the parade was a live camel.

“Hi Jolly” was the Americanized pronunciation given to Hadji Ali, who came here in 1856 as part of an experiment by the U. S. Army in the use of camels.  There are conflicting accounts of his exact place of origin but it seems clear that he came to the U. S. from the Middle East as one of the first, and the lead, camel driver.  For a more complete account check the entry in Wikipedia for “Hi Jolly.”

The experiment did not work out as the Army’s horses, mules, and burrows were apparently terrified of the giant animals and would panic in their presence, but Hadji Ali remained in the U. S. and eventually ended up in Quartzsite where he died in 1902 and was buried in the local cemetery.  We got the impression that he was something of a living legend in his own time and in the 1930’s the governor of Arizona had a monument erected at Hi Jolly’s gravesite.  It is a small pyramid made of local stone with a metal plaque on one side and a metal profile of a camel on top.  According to Wikipedia the monument is allegedly the most visited location in Q.

When the parade was over we returned to our coaches.  Linda went for a walk and I wrote another article for Bus Conversion Magazine.  This was another short one, less than two pages and only 11 photos, on the installation of the new speedometer in our bus.  When Linda returned from her walk she made a broccoli-potato mash.  In addition to the broccoli and the potato it had soy milk, vegan butter, salt, and pepper.  The potatoes were not completely mashed and the dish was both tasty and had a nice mouth feel.

After lunch Linda made a shopping list.  We headed to the Kuehn Street market area and stopped at Barry’s Breads but our timing was bad, again.  We drove south on Central and found the entrance to the parking lot for “the big tent.”  This is where the RV vendors will be in another week or so, but nothing was open yet, so we went over to the Tyson Wells area west of Central Avenue and found some miscellaneous items and a pair of Crocs for me.  For all the shoes I brought I did not have something that was easy on, easy off.  We are parked on gravel and I needed something I could slip on quickly and easily to step outside the coach.

Most of Linda’s list was groceries so we drove to Blythe, California to do our shopping.  To vary our trip and see some new sights we stayed on Kuehn Street heading west past the edge of town where it became West Dome Rock Road.  The road parallels I-10 on the south side for a long way through BLM land and eventually ends at an interchange with the Interstate.  We saw lots of RVs, and a few tents, spread out on either side of the road, but not nearly as many as we thought we would.  There are probably a lot more RVs here than we realize, but the desert is a vast place.

When we got to Blythe we took a few minutes to drive through town and get a feel for the place.  It had a more developed, modern, and prosperous business district than Quartzsite and more houses, as opposed to park model trailers and mobile homes. The houses were not fancy but they were in decent condition.  Schools and municipal buildings were also nice, and there is nothing in Q to compare to the two supermarkets and name brand stores like Auto Zone, NAPA Auto Parts, and K-Mart.  We started at Albertson’s and got most of the items on our list.  We then went across the street to Smart and Final Express and picked up a few things there.  Once again we were not able to find the Silk brand Soy Coffee Creamer, which has us wondering if we last bought it at Wal-Mart in Parker.

When we got back to camp I unloaded the car and Linda put the food away.  I wandered over to say high to Butch and Fonda and play with their dogs, Daffy and Rascal, for a few minutes.  I then went over to say high to Jim and Barb’s dog, Roho, which brought them out of their motorhome and got me invited in.  Linda eventually wandered over looking for me and the four of us had a nice chat.  It was the first time since they got here that I had been inside their rig, a Country Coach Intrigue, and it was very nice.  It has one slide on the front half of the driver’s side, and there is no doubt that it really opens up the interior.  Before we bought our bus we were looking seriously at Country Coach motorhomes (but not their Prevost bus conversions) and the Tiffin Allegro Bus (which is a purpose-built motorhome, not a true bus).  But in the end we were bitten by bus fever and we still have it.

We stopped to visit briefly with Butch and Fonda on the way back to our rig.  Butch has always had an interest in metal detecting and has developed an interest in rocks since arriving in Quartzsite.  If you had the slightest inclination towards rocks, gems, and minerals then being in Quartzsite during the winter would likely push you over the edge into a full-blown hobbyist.  Sometime in the last couple of days Butch bought a used contraption that consists of a table saw, two grinding wheels with a water delivery system, and an electric motor.  He and Fonda acquired a bucket of rocks, including a piece of petrified wood, and they are setting up an area outside their bus to work on their new hobby.

For dinner Linda made pan-grilled tofu slices with caramelized onions and bar-b-cue sauce, but with a twist.  Instead of hamburger buns or slices of bread she heated 12″ tortillas and made wraps.  Of the various ways she has served this simple, but delicious, dish this was definitely my favorite so far.  As much as I like a nice, fresh bun the tortilla wrap kept all of the ingredients contained so that I got onion and BBQ sauce with each bite, and they did not end up all over my plate and all over me.

As we do most evenings, we relaxed, played games, worked puzzles, read, and wrote. We are always a bit surprised at how tired we are after dinner, but we are up and about during the day and the fresh air and sunshine just seem to wear us out.

The roof of our bus after cleaning looking SW as viewed from the driver side front corner.  Quartzsite, AZ.

The roof of our bus after cleaning looking SW as viewed from the driver side front corner. Quartzsite, AZ.

2015/01/11 (N) Swimsuit In January

I turned the lights off last night at 11 AM and was up at 7 AM this morning which seems to have become my current routine.  Because of the new (to us) mattress I was able to get up without waking Linda up.  I turned up the heat in the front of the coach but not the back as Linda does not sleep well in a warm room.  I started getting the coffee ready but did not grind the beans because of the noise it makes.  I worked at my computer on organizational tasks such as copying files to the NAS, copying blog posts from e-mail to Word, and backing up website and photo files to the NAS.

Linda got up around 8:30 AM and set the microwave convection oven to preheat in convection only mode.  When it was ready she heated up the leftover cinnamon raisin rolls she took out of the freezer yesterday and put in the refrigerator.  While the rolls were heating I finished making the coffee.  Although they are not gigantic, one of these rolls would probably be plenty of calories for breakfast.  Two rolls, however, made for a very satisfying meal.  Still, they take about four hours to make fresh and about 25 minutes to reheat.  She makes a batch of eight, so if we each had one for breakfast her efforts would cover four meals instead of two.

Today was another bus cleaning day, but first Linda went for her morning walk while I continued to organize photo files on our network attached storage device.  It was forecast to be a cloudy but mild day and by late morning the clouds had moved in, so when Linda got back we got busy.  Even with the cloud cover it was warm enough that I was able to wear my swimsuit and a T-shirt, my preferred outfit for working with water.  We bought some CLR Mold & Mildew remover yesterday and I tried using it on the lower rear roof.  It did not appear to have any effect so I abandoned any further roof cleaning and we got started on the sides.

The upper sides of our bus are not easy to clean.  Even with our Little Giant extension/step ladder set up as a step ladder at its maximum height I cannot quite reach the top curve of the side walls.  Knowing that was the case I cleaned all the way around the edge of the roof, where it meets the side walls and the front and rear caps, from the roof.  Once I was done with that we took the Little Giant extension/step ladder and converted it from extension configuration to step ladder configuration.

We worked all afternoon until after 5 PM and managed to clean the front and the passenger side.  We wanted to get the passenger side done because it faces south and we wanted to do this on a cloudy day.  Working a section at a time we used McGuire’s red automotive soap, scrubbed with an automotive microfiber sponge, rinsed thoroughly (with Q’s incredibly hard water), and dried with microfiber clothes.  We could not get all of the hard water stains off but it was a lot cleaner, and looked a lot better, than when we started.

The weather forecast for tonight was for heavy rain sometime between 9 and 11 PM with accumulations of up to 1/2″.  For a place that typically only gets 4″ of rain a year that would be a lot of rain for one storm.  We put our lawn chairs, mats, and other outdoor items in the carport for the night just to be safe.  Shortly after 6 PM we had our first sprinkles.

For dinner we had chickpea salad and wild rice vegan Waldorf salad with strawberries and peach slices and some Barry’s Basic Bread with a small glass of Franzia Fruity Red Sangria.  I responded to some e-mails after dinner and deferred work on possible survey questions for the FMCA national education committee until tomorrow.

Linda makes her selections at the Quartzsite Farmers Market.

Linda makes her selections at the Quartzsite Farmers Market.

2015/01/12 (M) E-mail Groups

It has stayed warm enough the last few nights that I have not needed the electric heating pad and we have been able to leave windows slightly open.  We both sleep better in a cool room with fresh air.  The deluge of rain that was forecast for last night did not develop but it was still mostly cloudy when we got up this morning.  After breakfast, coffee, morning puzzles, and checking in with the world we got on with our chores.

My major tasks for the day revolved around preparations for, and participation in, a 2 PM FMCA National Education Committee work session.  While I worked on that stuff Linda went for her morning walk, made an appointment to get her hair cut tomorrow, and made garlic naan (Indian bread) from scratch.  When the phone meeting was over I transferred photographs from my camera to my computer and then joined Linda over at Butch and Fonda’s coach for a late afternoon visit.

Jim L. showed up while we were chatting, read the electric sub-meters, and figured out our bills.  Linda had to write four separate checks to cover our site fee, electricity usage, laundry, and the rental for the apartment, which Jim gave to Barb to cover the cleaning before and after Marilyn’s upcoming visit.  Butch placed an order with PartDeal.com for a VDO speedometer so I had him order a VDO Cockpit Series 0-30 PSI Boost Gauge for me.  The UPS truck also showed up and had the two packages I have been waiting for.  All too soon the sun dropped below the western mountains and it turned chilly so we retreated to our coach.

Linda made curried red lentils for dinner and served it along with the garlic naan bread she made earlier in the day.  Warmed and energized by this fabulous meal I launched into my second major task of the day; the creation of an e-mail group in Microsoft Outlook for our FMCA Great Lakes Converted Coaches chapter.  I got the latest roster from Linda, who is the treasurer, and was able to rearrange it, save it as a CSV file, import it into Outlook, and map it to the standard contact fields.  It was then easy to create a Contact Group and select all of my new entries to go in it.  Once I got the group set up I wrote an e-mail to the members, my first since being elected President of the chapter back in October.  I was up much later than usual, but I got it done.

Escapees RV Club happy hour SE of Q in one of the BLM STVAs.

Escapees RV Club happy hour SE of Q in one of the BLM STVAs.

2015/01/13 (T) Geekiness

Today was a day for Geeks and geekiness.  Chris and Jim Guld, AKA The Geeks On Tour, arrived in Quartzsite yesterday and are staying at an RV Park not far from our encampment.  Butch knew they were headed this way and after he and I were unable to get EchoLink working on his computer yesterday he contacted Jim to see if he would be willing to stop by and take a look.  Jim is a former network administrator and knows a lot more about stuff like networking, protocols, ports, port forwarding, and proxy servers than we do.  But before he came over Linda and I had breakfast after which she walked over to the beauty parlor and got her hair cut while I worked on a seminar classification task for the FMCA National Education a Committee.

Jim G. arrived on his bicycle around 10:30 AM and stayed for a couple of hours.  He re-checked the things Butch and I had already tried and tried some things we had not, but we could not get Butch’s system to let the EchoLink program connect successfully to the EchoLink servers.  For the record, Butch’s system consists of a Windows Vista laptop that connects to the Internet one of two ways:  1) through a Verizon MiFi or,  2) through a WiFiRanger Go2 into a WiFiRanger Mobile into a DSL WiFi gateway of unknown make and model.  Jim also tried connecting through the WiFi hotspot on his Android-based smartphone.  Same result.  Mixed in with work we had a great visit with Jim and hope to meet up with he and Chris at least once while they are in Q.

After Jim left Linda and I were headed in to have a bite of lunch when an unfamiliar car pulled into the lot.  Barb was by the road and pointed the driver in our direction.  We quickly realized that it was Mara.  She had called Linda first but Linda did not hear the phone ring so it was a wonderful surprise when she showed up.  We visited for a couple of hours while we snacked on hummus, pretzels, and red grapes.

Mara is camped on BLM land north of town with the WINs (Wandering Individuals Network) and has been traveling off and on with groups of WINs since we last saw her in Gillette, Wyoming in July 2013.  Since that time she has also gotten a different motorhome, a 35′ Fleetwood Bounder, with which she is very pleased.  She invited us to join a group of WINs on Sunday to go to The Desert Bar and I think we will.  Linda checked it out online and it is a completely solar-powered, off-the-grid, place.  You have to take dirt roads or ATVs to get there.

It appears that things are finally going to get busy for us.  Gary, from BCM, is supposed to arrive tomorrow and Curtis, from RVillage, is supposed to arrive on Saturday.  Forrest and Mary are already here as are Chris and Cherie of Technomadia.  The Escapees RV Club has happy hours scheduled tomorrow and Thursday at one of the BLM areas east of town.  Blythe, California has a bluegrass festival starting Friday and running through Sunday.  We will probably go on Friday as there is also a Balloon Festival in Lake Havasu the same three days which we will probably attend on Saturday.  Somewhere in there I need to repair our Aqua-Hot and I am thinking that it will probably be Thursday.  The “Big Tent” Sports, Vacation, and RV Show starts on Saturday (17th) and runs through the Sunday the 25th.  Marilyn arrives on the Thursday the 22nd and leaves on the Thursday the 29th.  The last full week of January really is the peak of the winter season in Q.

After Mara left I used my macro lens to photograph the front and back of both of our amateur radio operator licenses.  I post-processed the images to improve the readability and reduce the file size.  Once I had the photos ready I downloaded and installed the EchoLink software on my Asus laptop.  I went through the initial configuration for my license and tried the server connection test.  As with Butch’s installation, two of the four UDP port tests failed.  I ignored that for the moment and went ahead with the validation procedure for my ham license.

Anyone can download and install the EchoLink software but only licensed hams can legally use it.  That is because it can, and often does, connect a computer to a ham radio repeater that is “on the air” and only licensed hams are allowed to transmit on those frequencies.  Validation was a multi-step process.  When first starting EchoLink I had to supply my FCC callsign, name, and (base station) location.  That information was transmitted to a database on the EchoLink servers but the EchoLink organization needed to validate that I was actually the person to whom that callsign was issued.  Through a separate process on the EchoLink.org website I had to upload JPEG image files of the front and back of my wallet license.  Once someone examined the images and made sure the call was active in the FCC database they “flipped the switch” on the server side and I was finally able to connect to stations if I wanted to.  I repeated the process later for Linda’s license.

While I was waiting to have my license validated I started trying to figure out how to get the EchoLink program to connect successfully to the EchoLink servers.  When the communications test with the servers runs it identifies the IP address assigned to the computer.  I went into the WiFiRanger Mobile and enabled UDB port forwarding for ports 5198 and 5199.  The TCP test was successful so I did not set up TCP port forwarding for port 5200.  Enabling port forwarding, however, was necessary but not sufficient.

What I ended up doing was switching the operating mode on the ESET Smart Security program from “Automatic” to “Interactive.”  With that change, the program would pop up a message box every time another program had outbound or inbound traffic through a port and ask if I wanted to allow the communication and optionally create a rule for it.  Several of those messages had to do with EchoLink and after clicking “Allow” to all of them the server/router tests were finally all successful and the program was fully functional except for the license validation.

Sometime in the late afternoon another motorhome showed up and backed in to the property with Jim L.’s help.  It was Larry and Sandy, who normally stay at Jim L.’s RV Park near the QIA.  Jim’s park is full so he put them over here in the spot by the laundry where Jack and Maria parked for a couple of nights a week or so ago.

We had leftover red lentil potato curry (thick soup) for dinner with the rest of the garlic naan and a glass of sangria and it was very good, again.  I finished up my FMCA education committee task and e-mailed it off.  I received an e-mail that my ham license had been validated so we played with the EchoLink program and User’s Guide for a while but did not try to connect to any stations.

While I was working on all of this I noticed that nine updates were pending for Windows 8.1 and there were four optional ones as well.  Installing updates is often an iterative process and so it was again this evening.  One of the optional updates was a roll up from November 2014 that was 723.9 MB.  That’s a big update.  I started downloading it at 23:52 MST and then went to bed.  My hope was that fewer people would be trying to use the local DSL system to get online at that hour and the update might actually load and install successfully.  But I would have to wait until tomorrow morning to find out.

L-to-R: Travis & Melanie Carr from the Escapees RV Club and Cherie Ve Ard & Chris Dunphy of Technomadia.

L-to-R: Travis & Melanie Carr from the Escapees RV Club and Cherie Ve Ard & Chris Dunphy of Technomadia.

2015/01/14 (W) SKP Happy Hour

As soon as I got up this morning I checked the huge Windows 8.1 optional rollup update that I started last night.  It had completed successfully except for restarting the computer, so that’s what I did.  While the update finished installing I made coffee and got the juice ready and Linda prepared our cereal.

Once the update finished I checked e-mail and websites.  Linda made white bean hummus to take to the SKP Happy Hour later today.  She then remembered that the Farmers Market at Desert Gardens was this morning from 8 AM to noon so we drove over there.  There was only one stand selling produce, but they were from Blythe, California only (20 miles away) so the produce was very local and very fresh.  Linda bought an assortment of veggies and a grapefruit.

We had parked at the south end of the western parking area and from there we could see a road going back towards “Q” Mountain and a well-defined trail going up the western side.  We drove back there and determined that we could park there when we decide to climb the mountain and do some panoramic photography.

We drove to Barry’s Breads and bought a loaf of Barry’s Basic Bread and then continued east on Kuehn Street to confirm Lloyd DeGerald’s location.  We took Riggles Avenue back over I-10 to Main Street and headed back towards Central Avenue, stopping at the Road Runner Market for a few things.  When we got back Jim and Barb were aggressively trimming the Palo Verde trees in the cactus garden.

As we often do most mornings, Linda went for a walk and I worked at my computer, installing three more optional updates and taking care of some e-mail.  We gathered up chairs, food, and beverages at 12:45 PM and drove over to the SKP Happy Hour on East Dome Rock Road.  There was already quite a crowd when we arrived and everyone was in a good mood.  And why not.  The sun was shining, the air temperature was pleasant, there were tables arrayed with food, people had beverages of their choice, Johnny Cockrum was performing, and lots of folks were meeting old and new friends.  We had a thoroughly pleasant time, but we always do when we are with groups of Escapees.

On the way back to camp we spotted Lloyd DeGerald and his wife out walking their dog and stopped briefly to chat about our Aqua-Hot.  We then stopped at the trailer for the Two Crazy Ladies and ordered engraved hang tags with our call signs and a sign asking emergency responders to rescue our cats.

When we got back to camp Linda went for another (short) walk and I sat down to work at my computer.  We lost our Internet connection while we were away and the DSL gateway would not re-associate with our WiFiRanger Mobile so I had Barb open the house and I power cycled the gateway.  I was then able reestablish the connection to our WFR-M.  That is the second time this has happened since we arrived here but so far has not caused us any real difficulty.

Butch has been having problems with their Progressive Industries EMS cutting off their shorepower due to high voltage.  We noticed during dinner that our PI-EMS was also showing a PE-3 (previous error – high voltage).  I do not know if our Magnum inverter switches on “instantly” when outside power is lost or if there is a delay but I am now wondering if we lost our Internet connection due to loss of power to the WiFi Ranger Mobile after which it was not able to reconnect with the gateway.  The next time this happens I may try powering the WFR-M off for 60 seconds and restarting it.  It’s also possible that the high voltage is wreaking havoc on the DSL gateway.

After dinner I sent a TXT message to Gary at BCM inquiring if he had arrived in Q as planned.  He called back and said they had just cleared Indio, California.  I suggested they find someplace to stop and rest and finish the trip tomorrow morning in the daylight.  They are headed to the Quartzsite Market Place dry camp area for the Eagles International bus gathering.  I spent the rest of the evening working on five different articles for Bus Conversion Magazine before finally turning in around midnight.

 

2015/01/01-07 (R-W) Q 2015 W1

2015/01/01 (R) Hola 2015

The salt restraining tube for the water filter housing.  The slotted end (R) goes down and the o-rings sit in the other end.

The salt restraining tube for the water filter housing. The slotted end (R) goes down and the o-rings sit in the other end.

Having stayed up later than usual last night to see the old year out and welcome the new year in we were in no hurry to get up this morning, especially given that the temperature outside was in the upper 20s.  But Linda said she would make her yummy vegan cinnamon rolls for breakfast so I felt obligated to get up and eat them.  Besides, it’s my job to make the coffee.  The rolls took quite a while to make and we ended up having them for brunch, but they were worth the wait.

I spent much of the morning looking for new games in the iStore.  I downloaded a dozen free ones and then started trying them in turn.  Most of them immediately tried to sell me a full version or ran a full-screen advertisement each time I tried to start a new round of play.  If they did that I immediately deleted the app.  I cannot imagine what makes a game developer think someone with tolerate that more than once.  At some point I realized that my AppleID was still associated with an old e-mail address so I initiated the process of changing it.  The process was not as seamless as I thought it could/would/should be, but I eventually got it sorted out.  Or as they say or Doc Martin, “sorted.”  As it turned out my credit card information was also out of date so I updated that as well.  Obviously I do not make iStore purchases very often.

I needed to regenerate our portable water softener even though it was 48 degrees F outside in the shade.  It was, however, comfortable enough in the sun to be able to work.  I started at noon cutting the plastic drain pipe that I bought at Herb’s Hardware the other day to a length of 10″ which is the length of a standard water filter.  I cut eight 3/8″ slots in the bottom end of the tube and got an O-ring from Butch to fit in the swaged upper end.  The purpose of the tube is to hold salt so that incoming water is required to pass through it to get to the softener but the salt crystals cannot actually wash into the softener.

Linda helped me transfer the contents of a 40 pound bag of solar salt to several two-gallon zip lock bags.  I then put a small quantity of salt in a one-quart zip lock bag and gently smashed it with a two-pound sledgehammer, although as I write that it seems to be something of an oxymoron.  I inserted the tube into the removable filter housing, slotted side down, and poured the salt around the outside of the tube.  I smashed a second bag of salt and added it to the housing.  I put the housing back on the filter head and slowly ran water through the softener for almost two hours.  I got a water hardness test strip from Butch and tested the output of the softener.  It was still showing 7 grains of hardness, exactly the same as two days ago.  It appeared that the regeneration process had not had any effect.  Bummer.

I discussed the situation with Butch and he suggested I back flush the softener.  To do that I needed a hose with female hose fittings on each end.  This is the kind of hose used to hook up a washing machine but neither one of us had one with us.  Butch, however, had a female-female adapter which allowed me to connect a male hose end to a male fitting on the outlet of the water softener.  (Backflushing literally means running water through the softener in the reverse direction to flush out any debris that may after gotten in through the normal inlet.)

The salt retaining tube in the filter housing with salt around the bottom outside and the o-ring visible at the top.

The salt retaining tube in the filter housing with salt around the bottom outside and the o-ring visible at the top.

After backflushing the softener I tried regenerating it again.  This time I used a 26 ounces of fine grain non-iodized table salt.  With my homemade diverter tube still in place I added the salt around the outside and screwed the housing back on.  I let the salt sit in the housing for 20 minutes to start to make a brine and then ran water through the softener until I got a very salty taste at the output.  I then shut the outlet valve and let it sit for 20 minutes.  When the time elapsed I ran water through the softener for another 15 seconds, checked it for saltiness, and shut the outlet valve.  At the end of another 20 minutes I ran water through it at a very slow rate for 20 minutes and then checked it again for salty taste.  It was still slightly salty and as it was getting close to sunset I decided to let it sit overnight.  I will finish flushing it tomorrow and check the hardness again.

While I was fussing with our water softener Butch recharged theirs in about 30 minutes.  When he tested the water at the end it indicated zero (0) grains of hardness; completely softened.  Their softener is different from ours and the regeneration procedure is very straightforward and apparently works.  For now I need to figure out a guaranteed procedure for regenerating ours, but long-term I need to figure out some other arrangement of just get a different softener.

The arrangement I am considering would be in conjunction with redoing the water bay. With a different arrangement of tanks I could create space in the bay for the softener, multiple filter housings, and associated plumbing.  I could set up an arrangement that would divert the incoming water (after the first/sediment filter) through a clear filter housing into which I could put the salt.  That clear housing/head would be permanently modified to force water through the salt and allow me to see when the salt was gone.  It would also eliminate the need to remove and reinstall the filter the way I have to now.  Alternatively I could put a tank between the filter housing and the softener (instead of the clear housing) and use it as a brine tank.  If the tank was big enough to hold a 40 pound bag of solar salt it would work just like a home softening system.  Water would sit in the tank with the salt for days so that the brine was ready to use when it was time to regenerate the softener.  I could even rig up a separate pump just for pumping the brine into the softener.  I’m going to give this a lot of thought before I start changing things around, but last winter in Florida and this winter in Quartzsite have made it very clear that hard water is a problem and we need a very effective and efficient way to deal with it.

While I worked with the water softener Linda began preparing a Tex-Mex bean soup for dinner and then went for a long walk.  She finished making the soup when she got back while I took a short nap.  It cooled off quickly as the sun set and nothing is quite as satisfying on a cool evening as hearty, hot soup.  It also had a bit of red pepper heat which was a nice bonus.  It was really good soup.

I had a few e-mails from Gary at BCM and a nice follow-up e-mail from Kathy at the Michigan Assessment Consortium.  She attached a copy of their holiday letter so I attached a copy of ours in reply.  I spent a little time browsing websites for OTA TV antennas and turbo boost gauges and finally went to bed without resolving what to do about either thing.  I have a lot of nights that end like that.

2015/01/02 (F) Crazy Days In Q

Contact is established with our cat, Jasper.

Contact is established with our cat, Jasper.

The “show” at Desert Gardens officially opened yesterday and runs through the end of February, so Quartzsite is quickly be transformed into a crazy place.  We were chatting with Butch, Fonda, Jim, and Barb after breakfast and Barb reminded us that starting now driving and parking “downtown”, and especially along Kuehn Street south of I-10, during the day will be difficult to impossible.  She offered to drive us down in the golf cart and come pick us up if we did not want to walk.  She also told us that many vendors will hold purchases for pickup at the end of the day.  We exchanged cell phone numbers, which we had not yet done since they arrived.  She suggested that if we wanted to eat out we should go early or right before closing as we might not be able to get seated/served otherwise.  There’s no doubt that we have lucked out on our arrangements this winter, and the situation just keeps getting better.

Linda was browsing on her iPad and discovered an all vegan grocery store in Rancho Cucamonga, California; the largest all-vegan grocery store in the world.  I looked up Rancho Cucamonga on Google Maps and it is located about half way between Los Angeles and San Bernardino.  Based on the speeds I like to drive (often just below the speed limit or 68 MPH, whichever is less) it looks like a four hour drive one-way from Q.  That’s obviously too far for a regular grocery run, but we might make a day trip in that direction sometime this winter and find the store while we are over there.

One of the things I did after climbing in bed last night was spend a little time looking at the Sure Marine Service website.  SMS is a major supplier of repair parts for Webasto diesel-fired hydronic systems headquartered in Seattle, Washington.  After studying their parts diagrams I became unclear (and concerned) as to whether the burner we removed from Butch’s old unit was a DBW2010 or a DBW2020.  They are very similar but not identical.  I am almost certain that our original burner is a DBW2010, but our AHU-xxx Aqua-Hot is so old that the model number is no longer referenced on the website and model specific documentation, like a service manual, is not available for download.

The reason I was looking at the parts diagrams was to identify the bearing kit for the blower as I wanted to order two of them today.  What I could tell from the website was that the 2020 is a higher BTU output burner and so one of the differences is that the 2010 uses a 0.35 GPH nozzle while the 2020 uses a 0.60 GPH nozzle.  That alone might account for why we seem to have poor combustion, although even money is still on bad bearings.  The unresolved issues and the inability to investigate at midnight did not make for a good night’s sleep.

I have the Aqua-Hot service/repair manual for the unit I bought from Butch, both on paper and on my iPad, so I spent some time this morning looking at the iPad version.  I could not tell if they used the same bearing parts so I did not order anything today and won’t until I can determine model numbers.  I asked Butch if he knew which burner was in the Aqua-Hot I bought from him, but he did not.  The service manual shows a Webasto label that identifies the burner model, but does not show where the label is located.  More investigation was needed.

After I got dressed I e-mailed Bill Gerrie (RetiredBusNut) in Ontario, Canada with questions about gauges and sending units for our bus engine and transmission.  I then started dealing with the water softener.  Linda returned from her walk and started preparing lunch, so I emptied the filter housing of the little bit of salt that was still in the bottom, rinsed it clean, re-installed the filter, and let it run for 20 minutes to fully flush out any residual salt water.

Linda made a warm garbanzo bean and kale salad for lunch with lemon juice and garlic.  It was the first time she had tried this recipe and we both agreed it was a keeper. After lunch I tested the hardness of the water coming out of the softener and it registered on the test strip between zero (completely soft) and 1.5 (definitely soft) so I dumped the remaining (hard) water in the fresh water tank and refilled it with 120 gallons of nice, soft water.  After the tank was full I retested the water coming out of the softener and got the same reading as before.  Finally, some good news on the water softener front.

With water softening taken care of (for now) I did an online search for a panoramic camera tripod head.  I really like shooting panoramas and the Microsoft Image Composite Editor (MS-ICE) does a remarkable job stitching images together.  Most of my panoramas have been handheld, which makes the performance of MS-ICE all the more impressive.  I have shot a few panoramas using a tripod but without a nodal point (spherical) pan head, so that is what I was searching for online.  B&H Photo had a Manfrotto on sale for $280, marked down from $600, but their order desk was closing for the day and I did not want to be rushed making this decision so I did not order it.  They will reopen tomorrow, so I will think about it overnight and do some more research.

I got our old Webasto burner out of the front bay and found the label.  It is, indeed, a DBW2010, specifically a DBW2010.75 with a 0.35 GPH nozzle rated at 45,000 BTU.  Linda recorded the details, including the serial number, and then helped me rewrap it in bubble wrap so I could put back in its storage pail.

Linda then went to Parker, Arizona with Butch and Fonda to check out the Safeway grocery store and look for some things at Walmart.  The Parker Safeway was supposed to carry Daiya vegan cheese products but they were nowhere to be found.  It appears that our closest source will be Whole Foods.  There are five of them in the greater Phoenix area but that is a two hour drive one way.

While the three amigos were gone I removed the cover from the Aqua-Hot in our coach and found its label.  Much to my relief it is also a Webasto DBW2010.75, 45,000 BTU.  It should also have a 0.35 GPH nozzle, and probably does, but I did not pull the burner out to check.  I noticed some soot on the final fuel filter inside the housing and in other places so that gave me something new to be concerned about.  I was pondering the situation when Jim and Barb and Roho came over to visit and we had a good long chat.  When they went back to their motorhome I put the cover back on the Aqua-Hot and put all of my tools away.

My plan for tomorrow is to turn the Aqua-Hot off, let it cool down, and pull the burner to check the nozzle.  It’s possible, though not likely, that I do not have the burner seated quite right and there’s a chance, though very small, that reinstalling it will fix, or least improve the performance.  My money (literally) is still on the blower bearings.  Hopefully it does not also need a new motor as everything on a Webasto is more expensive than seems reasonable. It’s another fine example of precision German engineering and manufacturing.

Even though I have quite a few e-mail addresses that I use to segregate electronic correspondence into manageable categories my inboxes still end up flooded with e-mails.  Very few of them are spam—we have good spam filtering on all of the accounts—but some of the highest volume inbound traffic is notifications of things like failed login attempts on WordPress websites.  Those e-mails do not get replies and often do not require any specific action on my part, but they sometimes obscure the presence of other e-mails that do require my attention.

Microsoft Outlook is able to deal with incoming (and outgoing) e-mails based on user-defined “rules” but I had never played with that feature until today.  I used the online help system to read about the whys and wherefores of e-mail rules and then tried creating some.  Once I understood what I was trying to accomplish it was mostly point and click to get it done, with a little typing thrown in.  What I ended up doing was creating sender/subject subfolders under the inbox of certain accounts and then creating a rule for each subfolder that directs incoming e-mails matching the criteria to the correct folder.  By keeping the sub folders under the inbox folder it will be clear to me that these are e-mails that I have received but not yet dealt with.

For dinner Linda made a cooked shredded Brussels’ Sprouts dish with tomatoes, dried cranberries, and pistachios and served it alongside the leftover Mexican rice with a glass of sangria.  Ole!  We agreed that both of these dishes were keepers and went well with the fruity wine.  The rest of the evening was quiet.  Linda read and played her online games while I finished up working on this post.  I finally went to bed and started reading the service and repair manuals for the Aqua-Hot system and the Webasto burner.  According to the long-term weather forecast tonight should be our last night with an overnight low temperature below freezing.

 

A few of the vendors at Desert Gardens, Quartzsite, AZ.

A few of the vendors at Desert Gardens, Quartzsite, AZ.

2015/01/03 (S) Hammer Stahl

I got up at 6:30 AM today.  I had been awake for a while before that and had some things I needed/wanted to do on my computer.  These were quiet tasks that I could do in the front of the coach, with the heat turned up, without disturbing Linda.

I always check my e-mail first.  There was a group message from Hillary at RVillage to all of the Ambassadors regarding a new feature they will be rolling out soon and seeking our assistance.  I mentioned this to Linda when she got up and we watched the two YouTube videos.  We did not have time today but will work on it tomorrow in advance of a 5 PM (4 PM PST) web meeting.

My first project today was updating the spreadsheet I maintain for our FMCA Freethinkers Chapter, which I started working on last night.  The chapter treasurer maintains our checking account but as the secretary I maintain the records including the roster and who has paid their dues for what years.  Because I have all of those details I also generate the quarterly and annual financial statements.  I entered the information for dues payments that had been received between November 1 and December 31.  I then added the five worksheets for 2015 (four quarters and year), which tie together and link back to the 2014 statement, and updated the cumulative financial statement.

Linda got up so I put my work aside to make coffee while she made breakfast.  We had a few bananas that were ripe so she made green smoothies for breakfast.  We happen to like kale but if we didn’t, green smoothies would be an excellent way to get our daily dose along with several other healthy ingredients.

We talked about visiting the market area today and decided to go later when it was a bit warmer.  The temperature a 9AM was still only 40 degrees F so Linda bundled up and went for her morning walk while I continued to work on my spreadsheet.

Once I finished the spreadsheet I worked outside for a bit.  I removed the cover from the burner end of the Aqua-Hot while it was running to check for an exhaust leak (sight, smell, touch) but I could not detect one.  When the cycle finished I turned the burner off.  My plan was to let the unit cool off and then remove the burner to check the nozzle size and do a general inspection of the combustion chamber and visible parts, but that did not happen today.

What I did instead was return to my computer and start putting Webasto repair parts in my shopping cart on the Sure Marine Service website.  The bearings on the installed burner are definitely whining and need to be replaced.  They are supposed to be replaced regularly anyway, so I put two sets in the cart.  It is very likely that they are causing the motor to run slow which means insufficient combustion air, and possibly lower fuel pressure, leading to the dark smoky exhaust.  I also put a fuel solenoid valve in the cart.  There is a good chance that the valve and/or the solenoid are not working on the other burner.  There’s also a chance that the ignition coil has failed, but the solenoid valve costs 1/2 as much as the coil, so I’m hoping it’s the valve.  I got the order submitted with UPS ground shipping and used PayPal to make the payment.

Once I completed the SMS order I loaded the B&H Photo app onto my iPad and spent quite a bit of time going between their website and the Sony online store trying to figure out if I should order a panoramic tripod head and/or new camera, possibly with a lens and flash unit.  Sony has the Alpha 99 FF body marked down from $2,800 to $1,900 with the vertical grip and an extra battery thrown into the deal, an additional $500+ value.  They will also bundle in the SAM 28-75mm f/2.8 lens for $400.  The lens by itself is normally $900, so that’s another $500 savings.

So for $2,500 I could get $4,200 worth of Sony’s top-of-the-line “flagship” DSLR (DSLT, actually) equipment, except for one thing; it was all on back order with an ESTIMATED ship date of February 4, 2015.  That’s my birthday, so if it actually shipped on that date it would be quite the birthday present, but if it was delayed very much there would be the very real possibility of it arriving at our location in Q after we had left.  Not good.

So what about B&H Photo?  It turns out that they (claim to) have all of these pieces in stock and they are selling the body with the added pieces for the same price as Sony, but they are not offering the lens at the bundled price.  That was the deal breaker that saved me spending a lot of money today.  Besides, I have been waiting a long time for Sony to officially announce and the ship the new (rumored) flagship alpha a99-II with its 36MP FF 35mm sensor and long list of awesome features.  To decide now to by prior generation technology it would have to be a very attractive deal, much better than what I was seeing online.

I ended up ordering a Manfrotto Nodal Point Pro panoramic tripod mount from B&H.  It should be here by the end of the week.  When it arrives I think we will hike up to the top of “Q Mountain” and try to capture the true essence of Quartzsite in the winter, which is RVs from horizon to horizon.

We headed down to the market area on Kuehn Street with Butch and Fonda and walked around for a couple of hours in the Tyson Wells Show grounds north of Kuehn Street and west of Central Avenue (US-95).  This particular market area had really filled up with vendors in the last few days.  Linda bought a nice white apron and really nice Hammer Stahl 5.5″ Santoku knife.  She checked online when we got back and she paid about 55% of the MSRP on the HS website.  She bought it from Cutlery by LeClaire, which also has a website, and has it on sale for $20 more than the price on the HS website, marked down $20 from their “regular” price.  The point is, she got it for what appears to be a good price of $59 and it came in a nice box with a ceramic sharpener thrown into the deal.

We drove farther west on Kuehn Street and pulled into the Desert Gardens show grounds.  It was getting near sunset, so we did not stay long, but Linda and I walked enough of it to get a feeling for the place.  It was a “rougher” setup than Tyson Wells and many of the booths were selling large, rough rocks and gemstones.  The vendors also had a lot more equipment set up and were using it to process materials.  We’ll be back, probably more than once, and earlier in the day so we can spend more time.

When we got back to our motorcoaches Fonda came over and worked with Linda for a little while on their business records.  We then had a nice salad and some of the spicy bean and pasta soup (that Linda made the other day) with crackers and sangria.  I spent more time after dinner researching stuff on my iPad and working on this post.

We appear to be in one of the few places in the country that is not getting clobbered by bad weather. The temperature is not even supposed to drop below freezing overnight. It will still be cool tomorrow, however, and we did make specific plans before going to bed.

 

A view of "Q" Mountain from the Desert Gardens Show area.

A view of “Q” Mountain from the Desert Gardens Show area.

2015/01/04 (N) Our Village

We had vegan pancakes for breakfast which prompted me to suggest that Linda invent some recipes, even if they are interesting and successful variations on existing ones, and feed them to our grand-daughter.  Linda could put them on our website using the WP Ultimate Recipe plug-in and, if they met with her approval, name they after “Bitty” (youngest grand-daughter’s latest nickname, although I think I will always prefer “Schmoo”).  Perhaps Pancakes Madeline; Sautéed greens a la Madeline; Pasta Madeline; or Madeline’s vegan mac and cheese.  Being retired gives me a lot of time to think.

Joe’s brother, Jim L., finally returned from Nevada today and was able to get the park model trailer unlocked.  Barb has been wanting to get in and clean it since she and Jim (different Jim) arrived.  Barb is a keep busy kind of gal.  She is responsible for maintaining the apartment and laundry room while she is here and told Connie she would also do some deep cleaning on their house trailer, so it’s been bugging her that she could not get in to do it.  As for my part, all I did was lock the door on the trailer the way Connie asked me to.  Barb and Jim (husband) had lots of keys but could not get any of them to work.

 

Today was shower day.  This is always more of a production than we would like because we keep the cats’ litter tray in the shower.  Most of the time that works really well—it is out of the way and contains any mess they might make—but it is inconvenient when we want to use the shower for its intended purpose.  Besides pulling the tray out into the hall by the bathroom door we have to clean up any stray litter in the shower to make sure it does not end up in the gray water waste tank.  Litter tray or not we still have to spray the shower walls when we are done, squeegee off the glass door, let everything dry, and then reassemble it as a giant cat litter box.  But it works and it’s one of the compromises we willingly make to live with our cats in so few square feet.

 

Once I was dressed I went outside to chat with Jim L. (Joe’s brother) and we discussed the possibility of upgrading the electrical service at our site to “50 Amp” (240VAC, 50A, 4-wire, the equivalent of a 120VAC, 100A residential service).  It’s not an issue for us right now as the cool weather has us burning diesel fuel to make space heat, but once the weather turns warm we may need our air-conditioners.  We have three but can only run one on a “30A” service and still have enough power to run other things.  A 30A service is just what it says; 30A of current at 120VAC.  A “50A” RV service is slightly more than three times that amount of power.

 

The electrical hookups here are very interesting.  Perhaps all RV park power pedestals work the same way, but I have never looked inside one so I don’t know.  The meter is at the top and the area below it has a top-hinged cover.  Under the cover are three panels about 3″ wide and 15″ tall.  The panels have an outlet towards the bottom and a circuit breaker near the midpoint.  Behind the panels are busses for the hot, neutral and ground with male blade connectors.  The panels have female blade connectors that engage their male counterparts when the panel is slipped and then hinged into place.  It is secured with a single screw.  If Jim L. can find a 50A panel all we will have to do is unscrew and remove the 30A panel and plug in the new one, once we verify that 240 VAC (L1& L2) are present in the box and wired to the distribution busses.

 

Instead of her usual morning walk Linda setup her laptop on the dinette table and worked on accounting and tax issues for Butch and Fonda.  I set my laptop there as well to work on the roster for our FMCA Freethinkers Chapter and Jasper got in between us, so we had a nice, cozy computing session.  When I placed my order with B&H Photo yesterday I checked a box to receive shipping status information via TXT message.  I got one this morning letting me know that my package had shipped from NYC.  Cool.

 

With accounting chores done for now Linda prepared vegan hot dogs with mustard, onion, and relish for lunch.  She then went for a long walk while I stayed at the coach and worked with a new feature on the RVillage website.  I was posting a lot of suggestions to the topic thread on the Ambassador forum and got a phone call from Curtis, the founder/CEO of RVillage.   We had a long chat and I was still on the phone with him when Linda got back.  I worked with the website some more and at 5:00 PM we connected to an Ambassador meeting using GoToMeeting on my computer.  This is a very exciting new feature and I think RVillagers and RV-related businesses are really going to like it once they know about it and see how it works.

 

Linda made mock (vegan) stroganoff for dinner.  She normally uses Basmati but the only rice she had enough of was Texmati so she used that.  Although I did not care for the texture of the Texmati in this dish (a bit crunchy), the taste was still very good.  This dish requires real cooking, which means it makes a real mess.  By the time everything was cleaned up and put away it was 8 PM and we were both tired.  I continued to research engine and transmission gauges while Linda read and played word games.  I also revisited the SonyAlphaRumors website but there was absolutely NO new information on the a99-II.  I went to bed wondering if this camera will ever actually exist.  Based on the comments I see online I am not the only one wondering if this camera will ever be a reality.

One of the hundreds of vendors at the Tyson Wells market area in Q.

One of the hundreds of vendors at the Tyson Wells market area in Q.

 

2015/01/05 (M) VSWR 1.0

Yesterday we finished up the coffees we have been using since we left Michigan at the end of November so this morning I had to open new bags and transfer the contents from their vacuum sealed bags to our metal storage canisters.  I had Teeko’s roast Ethiopian Yirgacheffe regular and decaffeinated separately, so I opened 1/2 pound bags of each.  I also opened a 1/2 pound bag of our special Sweet Seattle Dreams, which is 1/2 Sweet Dreams (decaf) and 1/2 Seattle Blend (regular).  I then made a pot of Ethiopian Yirgacheffe 1/2-n-1/2 while Linda prepared our granola with fresh bananas and fresh blueberries.

 

Linda went for her morning walk while I continued to do online research regarding the enigma known as the Sony a99-II DSLT camera and the supposedly discontinued, but apparently still very much available, Sony alpha a99.  If I did not already have a nice assortment of compatible Minolta A-mount lenses and flash equipment I think I would stop wasting my time with Sony cameras.  But I do, and so I continue to wait and be frustrated along with thousands of other “enthusiast” (sub-professional) photographers.  Because Sony builds the image stabilization (anti-shake) feature into the alpha bodies instead of the A-mount lenses the feature is available even with older Minolta lenses and the new lenses are slightly less complicated and less expensive than the Nikon and Canon lenses, which have the image stabilization built into each lens.  I think this was one of Sony’s best innovations.

 

I also continued to look at automotive gauges and sending units and decided to call Bill Gerrie (in Ontario, Canada) to follow up on his reply to an e-mail I sent a few days ago.  We had a great chat and he was able to clarify some things and add quite a bit of specificity to his written reply.  As a result I have a pretty good idea of what I am looking for; now it’s just a matter of finding it and deciding to place the order.

 

I was starting to work at my computer when Linda returned from her walk.  She eventually fixed a couple of vegan hot dogs wrapped up in tortillas with mustard, onions, and relish.   As I was finishing my meal I got a call from Gary Hatt at BCM.  He recently acquired an Eagle bus conversion and had some questions about the air-conditioners and the Aqua-Hot.  He plans to be in Quartzsite next to week and we are looking forward to finally meeting in person since I have been writing articles for the magazine for almost two years.

 

Linda has been having a problem with the brightness (or lack thereof) of the touch screen on her 19 month old Windows 8.1 Samsung laptop.  It will go very dim for no apparent reason and cannot be adjusted.  There was a driver update available for the Intel HD Graphics processor so we downloaded it, installed it, and re-started her computer.  The screen was now bright, which was more useful than dim, but still not adjustable.  That could be a coincidence or a fix, we will have to wait and see.  Even though it was working (for now) I drove to the local Family Dollar and bought an HDMI cable and some lightly carbonated water.  (The water had nothing to do with Linda’s laptop computer display, we were just low on sparkling water.)  The cable will allow us to connect her computer to one of our two flat panel LCD (LED) TV/monitors if needed.  (We did that after dinner and it worked, mirroring the built-in display to the monitor and setting the resolution to match the monitor’s 1900x1080p native mode.  But it also caused the built-in monitor to dim, although not as much as before.  When we turned off the monitor and unplugged it the built-in display did not return to full brightness.)

 

Mid-afternoon I saw Butch working on his Tarheel screwdriver antenna so I inquired as to what he was doing.  He had connected his MFJ VSWR meter to it through a six foot length of coax.  He had also unplugged the control harness for the tuning motor and rigged up a temporary switch to extend and retract the antenna.  He had done this because he was getting meter readings when connected through the installed coax that indicated the antenna was not resonant at any frequency or that the meter was not working correctly.  I climbed up on his ladder to have a look and saw VSWRs that were often greater than 31:1, and never fell below 10:1, with complex impedances that were rarely 50 ohms and with both resistance and reactance values that were all over the place.  Clearly something was not right.  It was not his installed coax and I was fairly certain I was not his meter, which I had used back at their house to check the VSWR on his CB and 2m ham antennas.

 

I climbed onto the roof of their bus so it would be easier to reach things and I could work sitting down.  We tried adding a ground strap as a counterpoise but it didn’t help.  Butch then grounded the strap to the chassis at the motor but that did not help either.  Our concern was that the antenna was not sufficiently bonded (grounded) to the roof but nothing we tried made any difference.  I decided to set the antenna to its shortest length (highest operating frequency), set the meter to a lower frequency, and then slowly lengthen the antenna, thereby lowering the operating frequency, while looking for some sort of response on the meter.

 

I got no change on the meter and finally realized that the antenna (via the meter) was behaving as though it was not grounded.  I noticed what looked like a thick washer between the SO-239 antenna connector and the base mounting plate of the antenna.  The mounting plate is the ground reference for the antenna and is connected to the base of the antenna through a coil of insulated wire (an inductor) known as a base loading coil.  The spacer was a plastic insulator that was, indeed, preventing the case of the SO-239 antenna socket from making contact with the mounting plate.  As a result the antenna was not grounded through the coax cable shield, preventing the meter from obtaining meaningful readings.

 

We removed the antenna connector, removed the insulated spacer, reassembled the connector to the antenna, reattached the coax and meter, and took additional measurements.  This time we got excellent readings that made very good sense.  We checked the upper bound, lower bound, and the midpoint of most of the high frequency (HF) ham bands and were always able to obtain VSWRs of 1.3:1 or less, which was excellent.  Butch had been considering redoing the mounting of the large motorized fold-over base so it was a good thing we figured this out as it saved him a lot of unnecessary work.  If I can solve one problem without creating others I figure it’s a good day.  BTW:  VSWR stands for Voltage Standing Wave Ratio and 1.0 is not a beta version, it is shorthand for a ratio of one-to-one (1:1), which is the best SWR you can have.  Anything below 1.5:1 is considered excellent, below 2.0:1 good, and below 3.0:1 usable if that’s the best you can do.

 

Chayote is a fruit that is a member of the squash family and is related to other gourds such as melons and cucumbers.  Linda bought one last week when we went to Albertson’s grocery store in Blythe, California and decided to prepare it for dinner tonight.  She sliced it into long thin broad strips and sautéed them with onions, oregano, salt, and pepper.  She served it alongside the leftover mock (vegan) stroganoff with a glass of sangria.  Our wine friends can cringe all they want; we find the Vella and Franzia boxed wines generally agreeable and the sangrias go surprisingly well with a variety of dishes.  And it has me drinking red wine, so it’s healthy too!

 

We lost our WiFi connection this evening.  Not sure why.  The wireless gateway still shows up in the WFR list but won’t associate with the WFR.  Butch had the same problem at the same time so something obviously changed.  We will ask Barb to open the trailer tomorrow, or get Jim to do it if she is not comfortable, so we can reset the gateway.  Hopefully that will do the trick.

The sunsets in Quartzsite are amazing almost every night.  This shot was taken from our campsite in Q.

The sunsets in Quartzsite are amazing almost every night. This shot was taken from our campsite in Q.

 

2015/01/06 (T) You’ve Got Mail (Maybe)

 

Our mail situation here is interesting.  Remember that, per our Jamaican tour guide, we do not have problems, only situations, and situations are easier to deal with if I regard them as interesting rather than annoying.  With regards to receiving mail, the “situation” is as follows.  Although every structure in town has a street address—necessary for police, fire, EMS, trash collection, and other municipal services—the Quartzsite post office does not deliver mail to said locations.  They have an annex building on the northeast side of town that is nothing but P. O. boxes and all of the locals, and a lot of seasonal residents (including Joe and Connie, who own the property where we are staying) have a P. O. Box.

 

Where things get interesting is that the main post office and the street addresses are associated with one ZIP code but the P. O. boxes have a different ZIP code.  If something is coming to us via UPS or FEDEX we have to use the street address and associated ZIP code, but if it is being mailed to us USPS we have to use the P. O. Box number and associated ZIP code, or have it sent c/o General Delivery using the main ZIP code.  To confuse matters further, Joe and Connie had to return to Nevada because of Joe’s health and are having their Quartzsite mail forwarded back to their home, so we cannot have mail sent to us “care of” them as we originally planned as it just gets forwarded to Nevada.  Outbound mail does not appear to be a problem, but then why would it be?

 

The other situation that developed yesterday was that our WiFiRanger Mobile Ti disconnected from Joe and Connie’s WiFi (DSL) gateway and would not reconnect.  The WFR is telling us that the WPA password may be incorrect, but that is unlikely as we have been using it since we arrived last month, as have Butch and Fonda who also lost their connection yesterday and could not reestablish it.  The evidence suggests that the gateway needs to be reset.  Why?  Who knows?  DSL gremlins perhaps.  Or mischievous Internet fairies.  Or a problem with the local DSL service?  Or perhaps Butch keyed up his 600 Watt linear HF ham radio amplifier and blew out every wireless DSL router within a quarter mile?  Whatever the cause, once we can get Barb or (brother) Jim to open the trailer we will power cycle the gateway and see if that restores our ability to connect to it.

 

In the meantime, in order to get online last night and again this morning, we turned on our Verizon MiFi.  The Verizon signal here is strong and steady, and the data rate is much faster than the DSL/WiFi connection, but we only have a 4 GB data plan so we tend to use WiFi when available.  It is not always available, of course, especially while traveling (and especially if we are boondocking at Wally World or other such locations) and when it is available it is not always reliable or is so slow as to be useless.  This can be the situation, for instance, at larger RV rallies and even some RV parks.

 

So we logged into our Verizon Wireless account, looked at our current plan, and saw that for a mere $10 more per month we could increase our data plan from 4 GB to 10 GB.  The cost for exceeding your monthly data plan limit is $15/GB, so the extra $10/month was a no-brainer.  And VZW made it soooo easy to change our plan (once we were logged in); just click the data plan we want, review changes to our account, and click “Apply Changes.”  Done; they have our money and we have more data allocation.  Interestingly, they upped our data allocation immediately for the current billing cycle, which is Dec 20 – Jan 19, and added the $10 to the bill we will receive for that cycle.  No pro-rating going on here, but then we can use the whole 10 GB if we want/need to.

 

Interestingly the cost to go from 10 GB to 15 GB was an additional $20/month, so the 10 GB plan seems to be a sweet spot after which you pay a premium for additional access.  On the one hand Verizon wants to sell you data bandwidth but on the other hand there is a finite amount of data they can move through their network, so if you want to use a larger chunk of their capacity it figures that it would come with premium pricing.

 

Until a few months ago Millenicom was reselling 20 GB MiFi plans (on Verizon’s network) for $70.  It was the best deal around; a sufficient amount of data for the same price we were paying Verizon for only 4 GB.  Kind of unfair, when I think about it.  Well, Verizon decided to stop selling bulk capacity to Millenicom (and other MVNAs?), took all of the accounts in-house, and Millenicom went out of business.  Not really a big surprise when you think about it.  Verizon also notified those customers (as I understand the situation) of their “options” which were not, apparently, as attractive as the deal they had with Millenicom.  Not really a big surprise when you think about it.

 

Anyway, we will see how we do with 10 GB/month while we are on the road.  We can change back to our 4GB plan when we get home, but I doubt that we will, and we can increase it to 15, 20, or even more GB per billing cycle if we need to, but that is unlikely.  We have an AT&T landline at home with DSL service that provides an “always on” Internet connection (when it works).  It has a 150 GB/month data allowance and allows us to monitor and control our whole house generator and WiFi thermostat.  We have discussed adding a security system and a personal weather station linked in to Weather Underground’s Wundermap when we get home.  I don’t think our DSL connection is fast enough, however, that we could use 150 GB in a month if we tried.

 

Linda went for her morning walk and I made a quick run to Barry’s Breads.  Barry is a really nice older gentleman who has a small bakery stand on the north side of Kuehn Street east of Central Avenue.  Just behind the stand, however, is a larger trailer in which he bakes all of his products.  Those products include breads, rolls, savory items, and sweet goods.  Most of his products use butter, cream cheese, cheddar cheese, or ranch dressing, but his Basic Bread is just that, flour, water, sugar, salt, and yeast.  I have had some difficulty figuring out what time of day to stop by but this morning he finally had loaves of bread, and some hamburger buns made from the same recipe, so I bought a loaf and a pack of four buns.

 

When I got back I started working on another article for Bus Conversion Magazine.  A little over a year ago I installed an RV-Critter Guard to seal around the shorepower cord and water hose where they enter the utility bay through the floor.  I took a few pictures during the installation and have had the article on my “future” list ever since.  By the time Linda got back from her walk I had the article mostly finished and was starting to look at the photographs.

 

She had stopped at the Salvation Army store, which was open, to use their facilities and ended up buying a grocery bag full of clothes for $1.  Not $1/item, $1 for the entire bag.  Most of the items were tagged with color codes indicating prices of one or more dollars each but they had too much inventory and needed to move some product.  They told Linda that when that happens they have their $1 bag sale.  Deal.  She called Butch and Fonda to let them know and I think they headed there before going to check the post office box and then stop at the post office if needed.

 

Linda cooked a couple of our Boca vegan mock hamburger patties and served them with fresh sliced onion, lettuce, and pickles on two of the buns I had just purchased.  Not an entirely WFPB meal, but very few of our meals are.  Still, we try to get as much plant-based whole foods as we can every day.

 

Linda went for a second walk after lunch and headed down Central Avenue towards the Kuehn Street markets.  She is so fond of her 5.5″ Hammer Stahl Santoku knife that she wanted to buy the 3.5″ paring knife if Cutlery by LeClaire had it for sale as an individual item.

 

While Linda was gone I finished working on the photos for my RV-Critter Guard article.  When she returned from her walk she had both the Hammer Stahl 3.5″ Paring Knife AND the 3.0″ Birdsbeak Paring Knife.  As we learned the other day from an Alton Brown video paring is actually a technique in which food is held in one hand and a knife in the other; no cutting board is involved.  Paring knives are generally smaller with a shorter blade and most of the weight is in the handle, allowing very fine control of the cutting edge and tip.

 

The Birdsbeak is a particularly interesting and unusual knife.  The bottom/cutting edge is slightly concave rather than convex like the classic chef knife.  The bottom edge joins the top edge in a point with a shape that resembles certain types of curved bird beaks.  In use, the knife is often held stationary and the food is pressed or turned into it, such as decorative peeling, pitting of fruit, or slicing strawberries.  Linda is often reluctant to spend money on herself so I think it’s nice that she found something she wanted and made the decision to buy it.  Like any high quality tool it will make the work it is designed to do easier and more enjoyable.

 

While I was uploading my article to our Dropbox Linda went outside to sit.  Barb wandered over and I mentioned that the DSL wireless Internet gateway had quit working.  She let me in the trailer where I found it sitting on the dining room table.  I powered it off, waited 60 seconds, and powered it back on.  All of the status lights came back on in the expected sequence and I was once again able to connect our WiFiRanger Mobile Ti to it.  We ended up standing by their Country Coach Intrigue motorhome and having a long chat.

 

Butch and Fonda were gone for most of the afternoon so we only got to chat for a little while when they returned before the sun dropped behind the southwestern mountains and the temperature dropped along with it.  Linda and I talked about going out to dinner, which we have only done once since we got here, but she remembered that we had a FedEx package scheduled for delivery today and that it might arrive as late as 8 PM.  So we had leftover soup with crackers and sangria.  This was the third and final meal we got out of this pot of soup and it was good to the last drop.  It was a packaged mix but Linda thinks she can recreate it; getting the spices right will be the tricky part.

 

After dinner I read DSLR reviews on the Digital Photography Reviews website and continued to look at gauges and sending units for the bus.  Around 8:30 PM I was having trouble staying awake but by 9 PM I had gotten my second wind and decided to write another short article for BCM.  This one was on the failure of Butch and Fonda’s main engine air-compressor on the drive down, how he dealt with it on the road, and eventually ended up installing a rebuilt one here at our campsite in Quartzsite.  I had the article written by 11 PM and decided to work on the photos tomorrow.

Sunset envelopes our coach as Linda prepares dinner.

Sunset envelopes our coach as Linda prepares dinner.

 

2015/01/07 (W) Catch 22

 

My main pair of reading glasses broke yesterday; not the lenses or the frame, but one of the nose pads.  Well, not the actual pad, but the small plate and mounting loop, specifically the mounting loop.  I was cleaning them and the whole assembly fell out.  The loop was split and had opened up.  The loop was a very small and delicate piece of ductile metal so I squeezed it back into a circle.  I removed the very tiny retaining screw, reinserted the mounting loop, and put the screw back in.  I was able to do this using only the tools available on my Leatherman.  The repair did not hold and it fell out again last night.  This time a piece of the loop broke off so the only repair will be a new mounting pad if I can find one.  There is a Wal-Mart in Parker that probably has an optical shop but I don’t know how universal this mounting system is.

 

I checked the level of the floor and counter in the kitchen last night and the coach appears to have settled slightly on the driver side.  Not a lot, but enough that I can feel it and it registers on the level.  I generally have to start the main engine and build up full air pressure in order to level the coach but I thought today would be a good day to finally pull the portable air compressor out of the car and see if the leveling system will work without the main engine running.  As it turned out that did not happen today because we ended up driving to Parker, Arizona.

 

Our destination in Parker was the Wal-Mart.  The store did not have an optical department but we found an eyeglass repair kit in the pharmacy area with a pair of screw-in pads and a pair of snap-in pads.  They also had a repair kit with a tiny screwdriver, spare screws, and other parts.  Between the two kits I was able to install a new pad in the car to replace the broken one.  That saved us a trip the optical shop in town.

 

Parker sits on the Arizona side of the Colorado River which is the boundary with California.  We decided to drive across and then take CA-62 over to US-95, follow it south along the River back down to Blythe, and then take I-10 back to Quartzsite.  Butch called while we were in Parker to let us know that there was a Farmer’s market at Desert Gardens.  It operates on Wednesdays from 8 AM to noon so we did not make it back in time but resolved to go in future weeks.

 

I worked on my “roadside repair” article for BCM while Linda went for a walk.  Jim and Barb had gone to Blythe to buy a new faucet and Jim L. stopped by and helped Jim B. install it.  They borrowed a caulk gun from us (we carry two in the bay) but had to go buy caulk.  UPS showed up with yet another package for us, after which we had a long conversation about the inadequacies (incompetence) of the U. S. Post Office in Quartzsite.  (The UPS driver told me that both UPS and FedEx have extra drivers and trucks delivering into Quartzsite during the peak season.  What a novel idea.)

 

Back to the post office.  We are waiting for a shipment of two bottles of water hardness test strips that we ordered through Amazon but were shipped via USPS by a swimming pool supply company in Elkhart, Indiana.  I gave them the P. O. Box here in Q since the post office does not deliver mail to street addresses and it appears that they will likely get returned to the sender rather than delivered to us.  The root cause of the problem (and it is a problem) is that Joe and Connie are having their mail forwarded to their home in Nevada.  If their names are not on the mail the post office won’t put it in the box, but if their names are on the mail it still does not get put in the box, it gets sent to Nevada.  So as of now the box is sitting there but cannot be used; a genuine “catch 22.”

 

Fine, we will just use General Delivery.  The problem with that (and it is a problem) is that you can only pick up the GD Mail at the Quartzsite post office between 11AM and 1 PM, and there are untold numbers of people trying to do the same thing.  That means ridiculously long lines and ridiculously long waits.  Considering that the influx of seasonal “residents” to Quartzsite has been going on for over 30 years the postal “service” has had ample time to figure out how to handle the situation.  I mean, Amazon practically runs its holiday operations with seasonal employees, many of whom are RVers.  Gee, I wonder if there are any RVers around Quartzsite this time of year.  While the post office is trying to figure out how to not deliver our mail we have two more UPS shipments scheduled to arrive on Friday.

 

Linda made a zoodle dish for dinner.  She used her SpiraLife to turn a zucchini into long thin strips which she cut into 6″ lengths and then used like spaghetti in the dish.  The other ingredients were onions, garlic, mushrooms, asparagus, and green beans.  Everything got sautéed in a pan with a little olive oil, salt, and pepper.  We had a glass of Lamb’s Valley Organic Sweet White wine and it was a lovely meal.

 

After dinner I put the finishing touches on my BCM air-compressor repair article and e-mailed it to Butch to proof-read.  The only thing worse than writing an article that makes me look stupid is writing one that makes someone else look stupid, especially a friend.

 

I had an e-mail from Gary, the publisher of BCM, letting me know that the December 2014 issue was finally available online.  I downloaded both the SD and the HD versions.  I then clipped the cover from the SD version, pasted it into MS Paint, and saved it as a JPEG file.  I opened it in Faststone Image Viewer, resized it to a thumbnail, and sharpened it.  I then edited the BCM page on our website, adding the thumbnail image, the title of my article, and a brief description.  I have a similar entry on that page for every issue in which I gave had an article, starting with the February 2013 issue. The December 2014 article was my 14th in 23 months.

The last glow of this sunset reflects off the passenger side of our motorcoach in Quartzsite, AZ.

The last glow of this sunset reflects off the passenger side of our motorcoach in Quartzsite, AZ.

 

2014/11/17-23 Bus Work Wrapup

2014/11/17 (M) Bypass Extension

12VDC outlets on lower center cockpit console.

12VDC outlets on lower center cockpit console.

After my usual breakfast I decided to change the drinking water filter cartridge under the kitchen sink.  The new one arrived UPS on Friday but I wasn’t really eager to change it, given the difficulty I have had with it in the past.  As I expected, the old one did not come out exactly the way the instructions said it would and I fussed with the new one for 30 minutes without being able to get it in.  Butch popped into my bus to see what I was up to and I enlisted his assistance.  We fiddled with it for another 45 minutes and finally gave up and put the old one back in, although it did not go in easily.  Clearly we were doing something wrong but could not figure out what it was.

I am not exactly sure what Butch and Fonda did for most of the rest of the day but whatever it was they did not need my help.  I know they drained some coolant from a hose on the main engine and changed a short piece of hose.  Having gotten off to a bad start with the water filter cartridge I decided to pick the coach up a bit and then work on the 12 VDC outlets for the cockpit accessories.

There’s no such thing as a “small job” on a bus conversion; there are only big jobs and really big jobs.  The installation of the 12 VDC outlets involved mechanical and electrical considerations; I needed to mount them someplace that was accessible but out of the way, and I needed to be able to get 12 VDC power to that location.  There is a vertical panel about five inches wide just to the right of the driver’s right leg.  It runs from the floor up to the bottom of the dashboard and houses two thermometers, a cigarette lighter, and a swing out ash tray.  The panel comes out after removing six screws.  To the right of that panel is a house systems switch panel that was added by Royale Coach.  It is about 10 inches wide and comes down from the dashboard half way to the floor.  After checking to see what was behind the vertical panel I decided to mount the outlets to the passenger side of the floor-to-dash enclosure.  I mounted them below the bottom of the house systems switch panel and slightly back from the front plane of the dashboard.  They are very accessible in this location but tucked back out of the way enough to avoid getting kicked.

Just above the house systems switch panel is an enclosure for the CB radio.  I had previously removed the four screws that secure the front panel and pulled the CB radio out of its enclosure.  The power leads used spade connectors so they were easily disconnected and the incoming power harness was long enough that I was able to drop it through the speaker hole in the bottom of the radio enclosure and behind the house systems switch panel.  I also disconnected the antenna coax, as it is not connected to anything on the other end, and dropped it through the speaker hole as well.  I added compatible spade connectors to the wires from the 12VDC outlets including a 2-wire pigtail so I could connect both DC negative wires to the one available DC negative line.  I drilled a hole for the outlet wires to go through into the space behind the vertical panel as I would eventually like to power them from there and reconnect the CB (once I get an antenna mounted).  For now, however, this arrangement will do what I need it to do; power the various cockpit accessories while keeping the power cables out of from under out feet.

By 1:45 PM I had completed the installation of the outlets but I had not re-installed the various panels.  I locked up the coach and the three of us got ready to go to Logansport to run various errands.  Butch was wrapping up a conversation with International Thermal Research regarding the installation of his Combi unit and getting answers to a few remaining questions.  It turned out that the reason the coolant circulation pump was running was that we had left the bypass switch on the Zone Control Board in the ‘ON’ position.  That was also why the Summer Mode light was on.  Butch turned the bypass switch off and the various indicator lights all seemed to indicate what they were supposed to show.

I ended up buying the parts for a drinking water filtration system at Home Depot.  I got a GE Drinking Water Filter Housing and filter element plus a collection of hoses and fittings to connect it to the existing 3/4″” OD copper plumbing under the kitchen sink.  I also picked up a can of flat black spray paint to use on the accessory mounting board for the windshield center pillar.  We stopped on the way back in to Twelve Mile to pick up Daffy from the local veterinarian.  Fonda had taken her there earlier and dropped her off to have her teeth cleaned.  Daffy was still pretty groggy but glad to have the comfort of her owners.

When we got back to their house Fonda helped me set up some cardboard to catch any overspray and I sprayed one side and all of the edges of my center pillar board.  I then headed to my coach and finished putting the dashboard panels back in.  After that I turned my attention to the drinking water filtration system.  It took me a couple of hours but I got the old filter head removed, mounted the new housing, and made all of the connections.  I installed the new filter element and turned the water pump on, opening valves one at a time as I worked downstream looking for leaks.  The only leaks I saw were small ones between the 3/8″ brass pipe nipples and the 3/8″ female pipe thread sockets in the plastic filter housing.  Both leaks were easily remedied with an extra turn of the right angle shutoff valves.

I had not quite finished the water filter project when Fonda came out to let me know that Linda was on the house phone.  She answered some accounting/tax questions for Butch and then we chatted for a bit.  We decided that I would move the Martin Diesel appointment from this Thursday to next Monday, if possible, as the weather should be much more agreeable.  That will also give me four additional days to work on bus projects here, which I need.

I returned to the coach, finished up the plumbing, made a quick dinner, cleaned up the dishes, and went in the house for the evening.  Butch and Fonda had already gone to bed so I did the same and dealt with e-mails and this post.

New drinking water filter and hoses under the kitchen sink (in the bus).

New drinking water filter and hoses under the kitchen sink (in the bus).

2014/11/18 (T) Holes and LEDs

We were all busy all day today but did not have as much to show for it as we have on some other days.  That’s the way it goes with bus projects.  I worked on three separate projects for our bus and helped Butch and Fonda with one project on their bus.

The first thing I did after breakfast was to spray another coat of flat black paint on the oak board I plan to use as a mounting plate for various cockpit accessories.  I then went to work on enlarging the return air openings above the shelf in the rear closet.  This turned out to involve quite a bit of work.  On the passenger side I had to cut the carpeting on the inside of the closet and peel it off.  I then drilled a hole in each lower corner to allow access for a sabre saw blade.  I borrowed Butch’s cordless sabre saw, so that involved getting the saw from the parts room.  I cut from the back side, as I had access via the rear TV cabinet, and enlarged the opening to about 10″ x 10″.

I did not have access to the back of the panel on the driver’s side so I had to take a different approach.  I removed the lower panel which gave me access to the space and the various relays mounted on the floor of the cabinet.  I needed to make sure there wasn’t anything on the back side of the upper panel where I intended to drill and cut.  I borrowed Butch’s lighted inspection camera, which required another trip to the parts room, and used it to look up inside.  It was clear, so I cut the carpet on the inside of the closet and removed it.  Working from inside the closet I did not have room to use the sabre saw, so I used my oscillating saw to cut the opening.  Once the panel was cut through on both sides and the bottom it still had the metal mesh stapled to the top back side.  I was able to use that to pull the mesh loose from the fixed panel and remove it.

The next step in this project will involve installing a pair of 12″ x 12″ return air grills after I vacuum up the debris from the drilling and cutting process.  Home Depot carries these grills but was out of stock when we were there last night.  They are supposed to be in tomorrow or Thursday.  I already have a roll of 1/4″ grid hardware cloth and I plan to cover the openings with a piece of that to make sure mouse-sized critters cannot get through the slots in the grill, which will go over the hardware cloth.

By the time I got to this point it was time for a quick lunch.  After my meal I checked in with Butch and he was at a point where he needed assistance attaching an aluminum angle to the driver’s side front ceiling.  This angle would serve as the attachment for the vertical face of the chase that will hide the wiring running along the junction between the wall and the ceiling.  With Fonda’s help we held the first piece in place and secured it with one screw near the rear end.  We then measured down from the center trim of the ceiling and adjusted the other end to keep the angle as close as possible to parallel along its entire length with the ceiling centerline.  With that piece mounted Butch clamped another piece of angle to the mounted one, giving us a nice straight extension of the line, and then clamped the second piece to be installed to the extension angle.  I then secured the second piece to the ceiling with several screws.

Butch held 3″ Wiremold channel in place from the front air-conditioner trim to the gap between the two angles we just installed and marked it for length.  Fonda cut those while Butch cut a piece of plywood to the width and length needed and then installed them.  We talked about putting up the chase on the passenger side, or at least the Wiremold channel for the fluorescent ceiling lights.  Butch said they planned to make that chase deeper, and I suggested they bring it out as far as possible and build it as a cabinet using a face frame with several stiles (vertical pieces) and one long, top-hinged, door.  They both made note of the idea but did not want to get involved in that today.

I took a short break to call Martin Diesel and move my generator service appointment from this Thursday to next Monday.  I have more to do on the bus than I can complete by Wednesday afternoon and the weather Thursday morning is forecast to still be very cold.  The cold spell is supposed to finally break on Saturday with highs in the 50s and lows in the 40s.  I should be able to hook up the care and leave early Monday morning in 43 degree weather; much nicer than 18 degrees (Fahrenheit).

I now turned my attention to the LED replacement lighting for the F72T12 fluorescent light fixture in the hallway cove.  The first thing I needed to do was locate the 12 VDC positive and negative wires that were controlled by the pair of three-way switches; one by the pantry and the other in the bedroom.  In spite of having the wiring diagram for the old fluorescent ballast on a label attached to the ballast, I was not able to trace out the wiring.  Butch came over to see how I was doing so I enlisted his assistance.  The situation had us both puzzled for a while but we eventually sorted it out by removing the two 3-way switches from their junction boxes and checking for voltage to chassis (DC) ground at various points.  It helped that there is a second light fixture in the hallway ceiling just outside the bathroom door that is controlled by these same switches as this allowed us to know when there should or should not be voltage present at the main fixture.

With the wiring sorted out I made a short jumper wire with male spade terminals on each end and used it to jumper the red and white wires together in the base of the panty.  The white wire turned out to be DC negative (ground) and the red wire ran to the far (rear) end of the chase, so this provided a ground connection at the far end of the chase.  I recoded them with black tape.  The other red wire at the far end of the chase was the switched +12 VDC so I now had what I needed to power the LED rope light in that space.  I reinstalled the switches and cover plates and put the removable bottom shelf back in the pantry.  (The old ballast and wiring is still under this removable shelf.)

The LED rope light can be cut every few inches but I decided I should test it to make sure it worked before I started cutting it into smaller pieces.  I uncoiled the rope, which is supposed to be 52.5 feet long, as the instructions said not to apply power to it when it was coiled up.  I attached male spade lugs to the free end of one of the power cords, made my best guess as to the polarity of the rope, attached the power cord to one end of the rope, plugged the spade lugs into the two red wires in the chase, and turned on the switch.  Voila, I had guessed correctly on the polarity.  I checked the full length of the rope and all of the LEDs appeared to be working.  I need to check the length of the rope tomorrow to make sure it is the correct length.

The rope light came as a kit that included power cords (10), end caps (10), center connectors (10), and mounting clips (50).  This should be enough material to eventually redo all four of the fluorescent cove lights and add lighting around the inside face frame of a closet or two.  The lower portion of the center rear closet does not currently have any lighting and the main closet in the bathroom could certainly use more/better lighting.

I tried installing the mounting clips without much success.  It was night by this time and dark enough in the hallway that I couldn’t really see what I was doing.  As much as I wanted to the have this fixture functioning before I quit for the evening, I knew I had reached the end of this work for the day.  Rather than frustrate myself, and perhaps mess up something, I cleaned up my tools and materials and made dinner.  I had a Thai Kitchen Hot and Sour Rice Noodle Soup Bowl to which I added chopped up fresh mushrooms.  It was just the thing for a chilly evening.  I gathered up the day’s dishes and took them in the house to put in the dishwasher and then locked up the bus for the night.  I put another coat of flat black paint on my mounting board and then turned in for the evening to work on e-mail and this post.

2014/11/19 (W) Radio Woes

I was up a little earlier than usual this morning and rather than start the day with breakfast I sprayed another coat of paint on the oak board that I plan to mount to the windshield center pillar and use as a base for various cockpit accessories.  With that task completed I gathered up my cooking/eating utensils from the dishwasher and went out to my bus where I made a five cup pot of coffee and had some homemade granola for breakfast.  I then got to work on the LED lights for the hallway cove.

20141118-09586

The space in the driver side rear corner of the bus. Access is difficult and it is full of wires, relays, and the bedroom a-c evaporator and blower.

I still had trouble mounting the plastic mounting brackets due to the lack of room to work but eventually figured out that I could create enough of a hole with my center-punch to get the screw started by hand.  Because of the design of the chase I mounted two clips at each end and two in the middle.  I started from the rear end of the chase, laid the LED rope into the mounting clips closest to the wall, brought the tube around and laid it into the other set of clips and capped the end.  I inserted the two pins of the power connector/cord into the free end, turned on the power, and voilà, I once again had a functioning hallway light.  I reattached the fascia board and double checked that lights still worked.  They did, so I moved on to the next task.

The other three fluorescent ceiling cove light fixtures will be much more difficult to convert due to access limitations, but they are still working, at least for now, so I will leave them as is.  I decided to add some of the LED rope light to the lower part of the bedroom center rear closet as it does not have any lights.  (The only light is a single incandescent bulb fixture on the ceiling and the light from that is blocked by the self.  Duh.)  I mounted three clips inside the vertical stiles so as not to interfere with the door hinges.  I cut and mounted 32″ LED rope light segments, inserted the power cord pins, and mounted the rope with the power cord at the top.  An existing hole in the front corners of the shelf allowed me to pass the free end of the power cords up into the top part of the closet which has the aforementioned light fixture controlled by micro-switches on each door.  I un-mounted the existing light fixture from the ceiling and identified the +/- 12VDC lines feeding it.  I separated the two conductors on the free ends of each power cord and stripped them.  I then cut the two wires feeding the ceiling fixture and stripped the ends.  I reconnected all of the +12 wires with a wire nut and then did the same for the -12 (DC ground) wires. (This kind of work is easier to describe than it is to do, and probably takes less time.)

As long as I was working in this closet and had the access panel removed for the driver side rear corner I decided to mount the TuneTrapper FM antenna for the bedroom radio and connect it to the radio.  I mounted the antenna to the ceiling just aft of the ceiling light fixture using mounting tab cable ties.  I passed the coax through the a-c return air opening, down to the radio, and plugged it in.  I turned the radio on but only got static and squeals.  I scanned for stations but never heard one.  This radio worked the last time I used it, and did not even have an antenna connected to it, so I am not sure what has happened and will need to investigate this further tomorrow.

By the time I finished all of this it was getting dark.  I had complied a short shopping list throughout the day.  Butch needed to go to Logansport but Bill had shown up to work on Brittiny’s car so Butch felt he had to stay home.  There wasn’t much else I could do so I drove into Logansport and stopped at Home Depot, Rural King, O’Reilly’s Auto Parts, and Martin’s grocery store.  Home Depot finally had two of the 12″ x 12″ return air grills I needed for the bedroom air-conditioner return air project.

While I was in Logansport I was finally able to retrieve a voice message from Gary Hatt, the publisher of Bus Conversion Magazine, and call him back.  I also called Linda to see how her day went.  I got a call from Butch asking me to pick up an order from O’Reilly’s.  While I was there I looked at car radios but did not buy one.  The situation with the bedroom radio is that it is an old two-post automotive style.  They have not been made for years, having been replaced with the 1-DIN and 2-DIN form factor units, except for a couple of specialty companies that make “vintage style” radios for vintage vehicles.  Because that is a very specialized market the radios command correspondingly high prices.  I will modify the panel where the radio is mounted before I buy something like that.

When I got back I unloaded and stowed my groceries.  I then took one of the return air grills back to the rear closet to check the fit.  It was too big; way too big.  I measured it and it was 14″ x 14″.  Apparently the 12″ x 12″ on the label referred to the louvered area not the outside dimensions.  I will be making a trip back to the Logansport Home Depot first thing tomorrow morning.  I think they have a 10″ x 10″ grill which should measure 12″ x 12.” If that is the case it will fit perfectly.

When I got back to Twelve Mile I chatted with Butch and Bill for a while and then turned in for the night.  I got online and registered the Ridgid drill/driver I bought last Saturday.  It has a limited Lifetime Service Agreement, but only if properly registered.  I then wrote this post and went to sleep.

2014/11/20 (R) Instant-Hot (Not)

My schedule has been shifting gradually since I brought the bus to Twelve Mile, Indiana at the end of September.  In spite of it now getting dark by 6 PM I have been working on the bus later into the evening.  This is partly due to the fact that I am working on inside projects and usually have ample artificial lighting.  I did not get started checking e-mail and writing yesterday’s blog post until 11 PM and I did not turn the lights out until 2 AM.  I typically get 7 hours of sleep a night, and true to my nature, I work up at 9 AM this morning.  I had already planned to head to Home Depot in Logansport as soon as I got up, and by the time I was dressed I decided to skip breakfast and just go.

Center rear bedroom closet with LED rope lights in bottom and TuneTrapper antenna in top on ceiling.

Center rear bedroom closet with LED rope lights in bottom and TuneTrapper antenna in top on ceiling.

I returned the 12″ x 12″ return air grills (that actually measured 14″ x 14″) and bought a pair of 10″ x 10″ grills (which actually measured about 12″ x 12″).  It was 10:30 AM when I got back so I went across the street to Small Town Brew and got a cup of coffee rather than take the time to make my own pot and then have to clean it up later.  I had a nice chat with Lisa Paul (the owner) and Harold, who appeared to be an elderly farmer but I could not tell if he was “retired.”

I took the new grills inside to the parts room to see if the square pieces of 1/4″ hardware cloth I cut and painted flat black would fit inside the lip of the grills.  I had to trim about 1/4″ off of two adjacent sides on each piece.  I took everything out to the bus and got the passenger side cloth/grill installed fairly easily.  The driver’s side was another story.  First I had to drill a hole above the top edge of the grill for the TuneTrapper FM antenna coaxial cable.  The opening on this side was slightly larger than on the other side and I could not get both screws, one center top and one center bottom, to bite.  I found a piece of scrap 1×1 in the warehouse and cut a 6″ length on Butch’s chop saw.  I drilled two holes through it and used wood screws to secure it to the top of the opening.  I was then able to screw the grill in place with the hardware cloth underneath it.  I also had to work left-handed, which didn’t make the job any easier.

I vacuumed up all of the sawdust, wood splinters, and carpet fuzz from all of the cutting and drilling I had done in this area in the last few days.  The grills are white but I decided not to paint them as they are inside a closet.  I installed them with the louvers facing the rear of the closet so when the doors are open you cannot see through them into the space behind.  They look OK and, more importantly, will allow unrestricted airflow into the squirrel cage blower on the bedroom air-conditioner evaporator.

As long as I was working in the rear closet I coiled and secured the extra length of FM antenna coax.  I then located the speaker wires for the radio.  There were wires for four speakers, which I presumed were the two in the bottom of the overhead cabinet in the bedroom and the two under the wall cabinet in the bathroom.  All of the power wires were also part of that harness.  I was not able to determine why the speakers quite working, so I disconnected all of the wires from the radio, removed the knobs, retaining nuts, and faceplate, and took it out of the panel from the rear.  There are a LOT of wires behind this panel and it was not easy to get the radio out.  (The radio is mounted in a panel next to an alarm clock and under a row of pushbuttom switches.  This panel is installed under the main 240/120 VAC house electrical distribution panel, above which is the evaporator/blower portion of the bedroom air-conditioner.  That’s a lot of stuff with a lot of wires in a place that is difficult to access; another brilliant Royale Coach conversion feature.)

The evaporator is installed with the coils not centered in the opening.  In particular there is a 1″ gap along the bottom edge and a similar opening along the top edge.  The problem with this is that it provides a very direct path for air coming out of the unit to be drawn back in rather than coming from the return air grill.  I purchased two different sizes of foam weather seal at Rural King intended for sealing around the edges of a window mounted air-conditioner.  I cut appropriate lengths of this material and secured it in place using double-sided tape I got from Fonda.

I decided to mount the indoor/outdoor thermometer on the wall between the refrigerator and the house systems panel.  It only needed one small screw and a small piece of double sided tape towards the bottom to hold it to the wall.  It’s a nice location and should give a more representative temperature reading, being on an interior wall at eye level and not in direct sunlight or near the kitchen counter where the cooking gets done.  It’s also next to the refrigerator so it should have a strong signal from the outdoor remote sensor, which we keep on the middle shelf of the refrigerator compartment.  As long as I was fiddling with this, I changed the batteries on the remote sensor and the base unit.

I checked in with Butch and Fonda to see if they needed my help.  They were also working on inside projects, both bus and house, and did not need my assistance today.  If they do need my help they know where to find me and are not bashful about asking, but I still like to check in with them several times a day.

My next task was to remove the Insta-Hot water heater from the kitchen sink.  It has never worked since we got the bus, which is to say no water comes out of it when I depress the lever.  I also have no idea if the electric heating element still worked as we have had it unplugged.  I shut of the water pump and closed the primary cold water inlet valve and both the inlet and outlet valves on the new water filter.  I loosened the 3/8″ tube compression nut on the supply line and pulled it loose from the supply T.  I purchased two 3/8″ compression caps yesterday at Home Depot.  I applied Teflon tape to the threads on the T, screwed a compression cap on, and tightened it.  I re-pressurized the line, checked for leaks, and found some.  I tightened the cap more but I could not get the leaks to stop.

I again shut the pump off, closed all of the relevant valves, and opened the filtered drinking water faucet to relieve the pressure.  I borrowed Butch’s Teflon pipe thread sealant, cleaned the Teflon off the threads on the T, applied the sealant, and screwed the second cap on.  I tightened the cap and re-pressurized the system.  It leaked worse than before.  I tried to tighten the cap more and the leak got worse.  It was time for plan B.

The hose coming out of the new water filter feeds a T from which a line went to the Insta-Hot.  The other end of the T is connected via 3/8″ tube to a second T.  One line from that T supplies the drinking water faucet.  The end of the second T feeds the line for the ice-maker in the refrigerator, which we have valved off behind the fridge and unplugged.  The first T was no longer necessary and the second T wasn’t really either.  Given that I could not cap the first T successfully I decided to remove it.  That left the second T with a short length of 3/8″ tube with a compression sleeve and nut already in place.  The hose coming off the output side of the new filter housing was long enough to reach to the second T.  I snugged up the compression nut and restored pressure to the system.  No leaks!  Hurray.

My final project for today was wiring up a 120VAC outlet in the bathroom closet for the InterVac built-in vacuum cleaner.  The vacuum cleaner is installed in the hallway wall just to the left of the refrigerator and below the house systems panel.  The bathroom closet is on the opposite side of that same wall.  The closet has a false bottom with a removable panel that provides access to a 6″ deep space full of wires, hoses, and heaters.  Of particular interest to me was the Cadet electric toe-kick heater which runs on 120 VAC (~10 Amps) and is on its own circuit breaker.

I removed the access panel and then removed the thermostat knob and the front cover/grill (two screws) from the toe-kick heater.  I removed two more screws and the heater slid out the front of the toe-kick board.  I removed four small screws, took the top cover off, disconnected the power wires, and pulled them out the back of the unit.  I got a surface mount duplex outlet and a square metal junction box (with cover plate) from Butch.  I drilled a hole through the bottom of the closet next to the rear wall that was tucked under the shelves to the right.  I cut a two foot length of 14-2+g NM cable and used it to wire up the surface mount outlet.  I fed the wire down through the hole, and screwed the outlet to the rear wall.  I installed a strain relief in the back of the Cadet enclosure, cut a two foot length of 12-2+g NM cable, routed it into the Cadet, and completed the AC power connections.  I then put the top cover back on, slid the unit back into the recessed toe-kick, secured it in place, and put the cover/knob back on.  I routed the original power cable and the two new cables into the metal junction box, made all of the electrical connections, and put the cover plate back on.  I put the cover on the new outlet and plugged in the InterVac power cord, which comes out of a grommeted hole in the back wall of the closet.  I turned the circuit breaker on, turned the heater thermostat up, and it came to life.  I turned the thermostat back down to shut the unit off and turned the vacuum cleaner on.  It worked too.  I put the access panel back in place, gathered up all of my tools and supplies, and then swept up all of the construction debris.

The refrigerator has been running a bit colder than I would like so I made small adjustments throughout the day.  The unit was suddenly running at 44 degrees instead of the 35-37 degrees it had been indicating.  I removed the thermometer base unit from the wall and set it up in the refrigerator next to the remote sensor.  I will check it in the morning and see if they are in agreement.

Linda called around 8:30 PM and Butch came out to let me know.  We chatted briefly and I went back out to the coach to finish up and have a light dinner salad.  I wrapped up at 10 PM, locked up the bus, and went into the house.  Butch and Fonda had already turned in for the night.  Their oldest daughter, Gene, is getting married tomorrow in Indianapolis and they would be leaving early in the morning.

2014/11/21 (F) Wedding Bells

I set my alarm for 8 AM to make sure I was up and dressed before Butch and Fonda had to leave.  Gene, the older of their two daughters, was getting married at 4 PM today in Indianapolis and there were a few details I had to go over with Butch and Fonda before they left.  They were still getting ready so I went across the street to Small Town Brew to have a cup of coffee and chat with the proprietor, Lisa Paul.

The first of two return air grills that allow air to pass through the upper portion of the center rear closet.

The first of two return air grills that allow air to pass through the upper portion of the center rear closet. The TuneTrapper FM antenna is visible upper right.

When I returned to the house Fonda showed me how to operate their washer and dryer and the various additives she uses.  She pre-measured the food for the dogs and told me what time to feed them, when they needed to be taken outside, and the policy on “cookies” (dog biscuits).  Butch gave me a house key so I could come and go as needed.  He found some audio speakers that might be useful in diagnosing the problem with the bedroom radio.  He also found a multi-probe digital thermometer that I could use to check the temperatures of the bus refrigerator and freezer compartments and ambient room temperatures against the Indoor/Outdoor thermometer we use for that purpose.  They loaded up the car at 9:30 AM and left to pick up Bill Tharpe in Mexico (Indiana).  Bill was flying out of Indianapolis to meet a friend in Arkansas (state of) and drive her back to Indiana and the timing was such that he could catch a ride down to the airport with them.

As soon as they left I sorted my laundry into lights and darks and loaded the lights into the washing machine.  I used my own detergent, which is free of dyes and perfumes, as years ago I had a bad reaction (contact dermatitis) to a name brand liquid laundry detergent.  With the laundry started I took the digital thermometer to my bus and had breakfast.  I read the directions for the thermometer, plugged in the probes, and turned it on only to discover that the 9V battery was low (depleted) and needed to be replaced before I could use the instrument.  It was a cool but sunny day!—a nice day for a drive—so I locked up the bus, transferred the laundry from the washer to the dryer, locked the house, and headed to Walmart in Logansport.

I was back in an hour, by which time the dogs needed to be taken outside.  With that chore done I put the second load of laundry in the washer and restarted the dryer on the driest setting.  I put the new 9V battery in the digital thermometer, plugged in the three probes, and turned it on.  I put one probe in the freezer, left one buy the counter (for ambient air temp) and put one in the fridge next to the base station and the remote sensor.  The digital thermometer is accurate to 1/10th of a degree Fahrenheit.  It is a serious piece of test equipment that Butch used for professional HVAC work, so I regard the temperature readings as correct compared to our indoor/outdoor consumer unit.  For the rest of the day I kept a log of the time and temperatures each time the refrigerator compressor started and stopped.

After studying the manual for the bedroom radio, a Kenwood KRC 3004, I worked for a while on the bedroom control panel where it was mounted.  After struggling with getting the radio out yesterday I realized today that the wood bezel surrounding the panel was removable, allowing the whole panel to come out and providing easier access to its back side and the wiring behind it.  That did not change my opinion about the design of this aspect of the bus conversion; it simply was not done with the idea that it would ever have to be worked on.

I had disconnected the harness for the four speakers powered by this radio yesterday so I checked at the connector for proper resistance and shorts.  Each speaker measured around 4 ohms (DC) and none of the negative lines were shorted.  (Technically the 4 ohm rating on a speaker is an AC impedance, not a DC resistance, but the resistance reading told me there was a complete circuit from the connector through the two wires and the speaker coil.)  The power supply wires appeared to be in tact so I reconnected the radio and turned it on.  I heard some static and could “move” it from the bedroom to the bathroom with the front-rear fader control but as soon as I tried to turn the volume up the speakers went dead.

This was starting to sound like a volume control component problem so I removed the top cover of the radio.  The volume control was a component about 1/2″ square and 3″ long mounted to a vertical circuit board on the left edge of the chassis.  There wasn’t much I could do with that but tomorrow I may spray it with some De-Ox-it just for grins and giggles.

I interrupted my work around 4 PM to feed the dogs and take them outside.  I was thinking about what to work on next and remembered that the latch side stile of the left closet door in the bathroom was coming loose and was difficult to latch.  I needed two “L” brackets to reinforce the upper and lower corners on the inside of the door where the stile connected to the top and bottom rails.  For the second time today I locked the bus and the house and headed to Logansport.  This time my destination was Home Depot, but it’s adjacent to the Walmart so it was still the east end of town.  I also went to Radio Shack, in McCord’s Do It Best Hardware, looking for a replacement radio but they do not sell car radios anymore.

I called Linda while I was in town and described the work I was doing.  She sent me a TXT message with data on our refrigerator at home.  Over the course of an hour the compressor cycled 7 minutes on, 13 minutes off.  That was useful information. That’s a duty cycle of about 1/3 or 33%.  Our bus fridge duty cycle was ~60% (30 minutes ON, 20 minutes OFF).  I think our home fridge is more like what I would expect, but I will discuss this with Butch.  What bothers me the most is how long the bus fridge runs when it comes on; 4x as long as the house fridge.

By the time I got back it was dinnertime.  I heated a Tofurkey Italian sausage with some diced onion and used it as a topping for a plate of salad greens, along with some roasted peanuts and raspberry walnut vinaigrette dressing.  I then worked on the bathroom closet door while I continued to monitor and record the refrigerator and freezer temperatures.  I also repositioned the ball catches on the door so it now closes easily and latches securely.

I was watching the data from the digital thermometers and happened to be looking at the readings from the one in the freezer when the cycle ended.  The temperature was around 0 degrees F and as soon as the compressor stopped running I watched the temperature climb 1/10th of a degree every few seconds.  The compressor seemed to come back on when the freezer reached a temperature of 10-to-12 degrees F.  If I presume a 10 degree rise (to keep the math easy) and the off time is 20 minutes, the freezer is heating up 1 degree F every 2 minutes (120 seconds).  That’s 1/10th of a degree every 12 seconds, which seemed pretty fast to me.  I also noticed, however, that the temperature in the refrigerator compartment continued to drop a few tenths of a degree after the compressor stopped, so perhaps that’s where the cold from the freezer was going.

How a refrigerator cycles depends on a number of factors: the efficiency of the unit, the ambient temperature, where the controls are set, how much and what kind of stuff is in the freezer and fridge compartments, and how often the doors are opened and for how long.  I don’t have any food in the bus freezer but there is plenty of mass in the form of containers of frozen water.  I don’t have much food in the bus fridge compartment either, but I have a lot of bottled water, “milk”, O. J., salad dressings, mustard, etc. and I have it distributed from top to bottom, including the door shelves.  I have the thermometers on the second shelf from the top.

I had spent quite a bit of time earlier taking voltage measurements on the push-button switches in the bedroom control panel in an attempt to figure out why the aisle lights were not working.  I was fairly certain this was a 3-way circuit with a second switch.  I found the “other” switch by the dinette, changed its position, and voila, the aisle lights worked!  For some reason that switch, the rearmost switch by the fake plant, appeared to not be wired as a 3-way with the one in the bedroom but rather to be in series with it; both switches have to be on for the lights to work.  That may not be how they are wired, as there could be a relay involved, but that’s how they behave.

I wrapped up my work for the day at 8 PM, locked up the bus and went in the house.  I took the dogs out and then gave them each a treat.  I folded and packed my clothes and then settled in to write while I waited for Butch and Fonda to get home.  They arrived at 10 PM and we chatted for a while about the wedding/reception, refrigerators, and radios before finally turning in for the night at 11 PM.

Bus bedroom driver side rear corner house systems control panel with Kenwood KRC 3004 radio removed.

Bus bedroom driver side rear corner house systems control panel with Kenwood KRC 3004 radio removed.

2014/11/22(S) T Minus 2

…and counting.  Today was my second to last day to work on the bus in Twelve Mile, Indiana.  Except for a few days in October, the first full week of November, and some weekends, I have been at Butch and Fonda’s place since I brought the coach here on September 30.  We have gotten a lot done on both buses in that time, but not everything on either list.  As much as I wanted to avoid a last minute scramble, there was still too much to do to take the weekend off.  I was up at 7 AM, took a shower, got dressed, finished yesterday’s blog post, and got to work.  I stayed busy until 10 PM, with short breaks to have a bite to eat and one trip to Logansport late in the afternoon.

My major accomplishment today was mounting the oak board to the center windshield pillar and then mounting the magnetic compass and Pressure Pro TPMS receiver to it.  I needed a standoff to mount the inclinometer, so I cut two pieces of 1×1 and spray painted them flat black.  I will finish mounting the inclinometer tomorrow, and possibly the inside rearview mirror.

My other major project was the removal, disassembly, diagnosis, repair, testing, and reassembly of the driver’s side motorized windshield roller shade.  Fonda helped me remove it and Butch helped with the rest of the process.  It appears that the problem was a soldered connection to the internal motor that failed.  I will reinstall it tomorrow, probably with Fonda’s help, and try to correct some alignment problems in the process.

I sprayed the on/off/volume control in the Kenwood KRC-3004 radio with De-Ox-It and left it to dry.  I came back later, plugged the connector into the back of the radio, and turned it on.  Nothing, nada, zip; zero sound from the speakers.  I suspect the volume control or the final output transistors have failed.  Either way I am not likely to get it repaired.  While I tend to think of Kenwood as good equipment, both of the radios in the bus have something wrong with them.  The front radio is obviously newer as it has a 1-Din form factor.  This will also make it easier to replace when I get around to it.

The bedroom radio is an old style unit with two shafts that are used to mount it and control most of the functions plus a center section for the cassette player, LCD display, and a few buttons.  This style of radio is now considered “vintage.”  There are at least two companies that make modern radios in authentic vintage form factors, but they are very pricey and targeted at the vintage restoration market.  Putting a modern 1-Din form factor radio in the bedroom panel will require me to cut the appropriate size opening.  Since the panel has 10 switches mounted in it creating the opening will be non-trivial.  A better option would be a remote radio with a slim profile control head, like the one Butch has from Custom Autosound.  The control head would cover the center opening and I could mount switches in the two shaft holes.  I thought of that riding to Logansport.  Our trips to town are often useful that way.

Another thing I did today was continue to monitor and adjust the refrigerator.  Since I spent much of the day working in the bus I was able to log the time of day and various temperatures each time the compressor started and stopped.  I missed cycles, of course, as I was in and out of the house or gone to town, but I think I got enough data to determine if there is a consistent difference between the indoor/outdoor sensors and the more accurate Cooper Instruments SH66A digital thermometer, and if so, how much and in what direction.  I also have useful information about the settings of the refrigerator (thermostat) control and freezer (air control) for the temperatures I want to maintain in the two compartments.  I will continue to monitor tomorrow as I wrap up my last few tasks and organize the bus for travel.  I entered the raw time and temperature data into an Excel Spreadsheet but did not have time to analyze it.  Big day tomorrow; have to get to bed.

Bus bedroom DS rear corner house systems control panel removed.

Bus bedroom DS rear corner house systems control panel removed.

2014/11/23 (N) T Minus 1

Today was my final day working on buses in Twelve Mile, at least until we return here a week from today.  The temperature continued to be mild but by noon it was raining.  I had breakfast and got to work as I had a long list of little things to take care of today.

I continued to monitor the refrigerator/freezer temperatures and record them while working on other projects.  I taped a piece of cardboard to the back of the bedroom control panel to cover the holes where the radio used to be and reinstalled the panel.  I reinstalled the driver side access panel in the lower rear closet and then vacuumed up the sawdust and other construction detritus.  I started organizing the inside of the coach for travel, getting things in boxes and getting the boxes on the floor on the two front sofas.  Twelve Mile now has a large recycling container that accepts mixed recyclables, so I carried several bags of plastic, cardboard, and cans over there rather than haul them back to the house.

Automotion shade with motor removed from end of roller tube.

Automotion shade with motor removed from end of roller tube.

Steve showed up mid-morning and helped Butch install a new AM/FM radio and CD player in the MC-9.  They also came over and helped me reinstall the driver side windshield roller shade. We tested it and it worked.  I like it when that happens.  I wasn’t as lucky with my mounting arrangement for the inclinometer.  I ended up modifying one of the pieces and then had to repaint the two ends flat black.  I left it to dry and busied myself with getting the bus ready to go to Gallahan’s Truck Stop for fuel.  I had turned the electric block heater on earlier so I turned it off and turned on the Aqua-Hot engine preheat pump.

I used Butch’s portable air compressor to air up the chassis (suspension, brakes, and engine accessories) and used his auto shop compressor to adjust the inflation pressures of the tires.  I have the 12VDC accessory outlets in the cockpit powered off of the house batteries, so I immediately checked the Pressure Pro TPMS sensor readings against the known pressures in the tires.  The correspondence was as follows (actual:sensor):  DSF (116:112), PSF (116:111), DSOD (95:92), DSID (95:91), PSOD (95:91), PSID (95:91), DST (85:83), PST (85:83).  All of the sensors are reading low from 2 to 5 PSI.  I need to create a little card to go by the display unit with these calibration adjustments.

Butch had to take Steve to Rochester to meet up with his wife and I was just getting ready to lock up the buildings so I could drive the bus to Gallahan’s when Fonda returned from church.  I stowed the folding step stool in the back of the car, unplugged the electrical shoreline and stored it just inside the warehouse overhead door, disconnected the portable air-compressor and stored it in the parts room, and turned off the Aqua-Hot (anything with an open flame is a no-no at a fueling station).  I fired up the engine and was about to leave at 1 PM when Butch returned.

I drove to Gallahan’s in light rain.  The new speedometer/odometer worked as intended, and I did not get a Check Engine Light (CEL) during the trip out and back.  I discovered, however, that my transmission retarder was not engaging.  I suspect that has something to do with removing and reinserting the cable connectors on the DDEC II when I was trying to diagnose and fix the Fuel Temperature Sensor Voltage High code problem.  Not having the transmission retarder is not a good thing, but there wasn’t anything I could do about it today.  I will probably try to figure this out on Monday, December 1st while we are parked back at Butch and Fonda’s awaiting our group departure for the southwest U. S.

When I got back from Gallahan’s I pulled the bus in front of the automotive garage so I could pull the car up behind it.  A lake was forming behind the bus, so I pulled up farther.  Butch has a 30 A RV outlet on the front of the garage, which was plenty of power for the unoccupied bus.  I moved all of the stuff I had stored in the parts room to the overhead door for the woodshop, which is directly behind where I normally park the bus.  I backed the car up to the door close enough that I could open the rear hatch and load everything into the back of the car while staying out of the rain.  I packed up clothing I was not going to need and loaded that in the back as well.

Once the car was loaded I pulled it around behind the bus and hooked it up for towing.  By this time there was a hard, steady, rain but I just worked through it.  All of the lights tested as good and the bus/car combination was ready to roll tomorrow morning.  I turned on the Aqua-Hot and turned up the heat while I prepared a couple of tofu hotdogs for a late lunch / early dinner.

Magnetic compass mounted to the oak board on the center windshield pillar.

Magnetic compass mounted to the oak board on the center windshield pillar.

I re-mounted the inside rearview mirror high enough that I will not bump my head on it like I used to.  I retrieved the mounting part I had spray painted earlier and tried to finish the installation of the inclinometer, but could not get it to work.  I will either have to take the case apart to get the mounting bracket loose or I will have to rethink/re-engineer how I mount it.  That was my last project.  I would rather not have ended on a note of failure, but it meant I have at least one project to look forward to.  I gathered up a few cooking/eating utensils, my camera, and a notepad, shut off the lights, and locked the door on the way out.

Back in the house I took a hot shower and put on some dry clothes.  I loaded all of the wet/soiled clothes in the washer and Fonda did a small load of laundry for me, transferring it to the dryer as well.  The three of us chatted while they ate dinner.  Linda called at 8:30 PM and we discussed the weather forecast for tomorrow, which, while well above freezing (to start) was less than ideal with rain and high wind advisories.  I decided to try for an earlier start than I originally planned.  With any luck I can be at Martin Diesel by 9:30 AM and on the road for home by 2 PM.  That would get me back to the house while it’s still daylight.

 

2014/09/27 (S) Eat Cut Eat

Today was VE testing day for our South Lyon Area Amateur Radio Club so some of the members, who conduct the volunteer examinations, got to breakfast even earlier than usual.  We had a good crowd and many simultaneous conversations.  After breakfast we drove to Ann Arbor to return the charger for the baby monitor.  It got left at our house yesterday when Linda took Madeline home.  Madeline was dressed in her Michigan colors with a blue T-shirt and maize skirt.  She gave me a tour of her backyard and toys and then we all went inside to visit for a while.  Linda and I each got to read a book to her which is always a treat for us.  We all had things to do, and we wanted to get out of town before the football game traffic clogged the streets, so we headed home before lunchtime.

Back at the house Linda straightened up and vacuumed, put together a grocery list, and then went to Meijer’s (grocery store) while I finished cutting the grass around the house.  It took me a couple of more hours, but between yesterday and today I managed to cut all of the newly planted grass and some of the more mature grass close to the house.

It was another pleasantly warm late September day and I used that as an opportunity to start the main engine on the bus.  I let it run for a while with the over-the-road air-conditioning turned on to put a load on it and bring it up to operating temperature, which helps drive off moisture.  Linda got home with groceries while the bus was running and I helped her get those into the house.

I let the bus run on high idle for about 30 minutes with the over-the-road air-conditioning on, which brought the coolant temperature up to its normal operating level.  The oil also warmed up, but not fully.  Before shutting the engine off I backed the bus up about 5 feet to rotate the tires to a different spot.  I turned the a-c off, dropped the idle to low, and let it run another 5 minutes, during which time I drained the auxiliary air tank.  I then switched the suspension system from ride mode to Level Low mode and turned off the engine.  As usual, I turned off the chassis batteries, shut off the auxiliary air to the air-powered engine accessories, and closed the shutoff valves for all of the air accessory circuits in the bay under the driver’s seat, except the circuit for the toilet.  (Yes, the bus has an air-powered toilet.)

I put a load of laundry in the washer and then spent some time at my desk checking e-mail and websites.  I had an e-mail from Gary regarding an article in the upcoming September 2014 issue of Bus Conversion Magazine.  They decided to run my article on the Parker FPM-50 Fuel Polishing Module project and wanted me to proofread it and respond to a few suggested markups.  I worked long enough for the washer to finish, moved the laundry to the dryer, and then shaved and took a shower.  By the time Linda finished her shower my hair was dry enough to cut, which it really needed.  We then got dressed to go out to dinner.  I checked the dryer but it was taking longer than I expected and clearly would not be done before we had to leave for the restaurant.

We had arranged at breakfast to meet Bruce (W8RA) and Linda (NF8C) Whitney for dinner at LaMarsa in Brighton at 6:30 PM.  Bruce and I both had mango smoothies (dairy free) and we got a veggie tray with hummus to share as an appetizer.  Although two dishes would have been plenty of food for the four of us, Linda (NF8C) wanted to sample their offerings.  There are basically four dishes on the menu we can eat so we ordered one of each.  Each came with soup so we all had the crushed lentil soup.  We had Koshary, Majadra, Ghallaba (garlic almond) and Mousaka (baked eggplant).  (We did not get the spicy version of any of these.)  It took the waitress a while to catch on to the fact that we were not going to order the whole meal at one time, but by ordering our courses one at a time we managed to spend a long time at dinner and had a great chat.

Back home I the set dryer on “Touch Up” and restarted it.  I proof read my BCM article and e-mailed clarifications to the editor and publisher.  I spent enough time on e-mail and websites for the dryer to finish, hung up the clothes, and played with my iPad for a little while.  I was tired enough that I just turned in for the night and did not even work of the blog or play games.  That’s pretty tired.

 

2014/08/31(N) By Any Other Name

My first task after breakfast was to sand drywall compound and apply the next coat where needed.  I’m down to touch up work in most spots and so I am trying to apply very thin layers with feathered edges that will dry quickly and require minimal sanding.  The old A-C opening in the library, however, is taking many, many overlapping layers.  Fortunately I can finish that at my leisure as Darryll is not working in that location.  Since he just this week installed the two pieces of duct in the lower part of the wall between the garage and the library I am still building up drywall compound to fill the irregular and, in places, large gaps on the garage side.  Unfortunately, the thicker compound takes longer to dry and watching drywall compound dry is worse than watching paint dry as it’s even slower.  The trick is to have something else to do while I wait.  Fortunately, I have lots to do.

I had some e-mail correspondence on Friday with the publisher of Bus Conversion Magazine, Gary Hall, whose name turns out to actually be Gary Hatt.  He had his reasons for not using his real name when he first took over BCM, which he explained and which made good sense.  BCM is running my article on Suncoast Designers in the August 2014 issue and he sent me a Dropbox link to the draft.  It looks like another really good issue, but is again coming out a month late.  Ever since the editor had a minor heart attack in early May they have been a month behind.  It appears that they will be doing an article on spin-on oil filters in the October issue and will also use my article on the Spinner II centrifugal oil cleaner that Joe and I installed a year and half ago.  I only have one other article ready for them to use, so I guess I need to get busy and write some new ones.

When I am not working on the house, the yard, or the bus, there’s always computer work to be done.  I have multiple projects to work on, but I also like to relax on a pleasant day and catch up on reading the blogs and RV magazines that I follow.  It was very pleasant today so we turned off the air-conditioning, opened up the house, and sat on the back deck reading and watching wildlife.  I addition to our resident American Red Squirrel we were treated to a visit by three Sandhill Cranes.  The squirrel has been busy for most of the month harvesting and stockpiling pine cones in what we presume is a midden under a cluster of very large fir trees northwest of the house.  The cranes spent a long time wandering around the back yard foraging.  We sat quietly and watched them and they came closer to the house than usual so we got a very good look at them.  They are large and magnificent.

I finally decided to continue editing the rough drafts of my blog posts for this month and get them ready to upload.  I still need to select photographs to go with some of the posts, or to put in separate gallery posts, but I finally uploaded the tree photos I took on the 21st to our Dropbox and e-mailed the link to Paul at Detroit Tree Recycling.

I spent some time online searching for sources of supply for an ignition coil for our Aqua-Hot diesel-fired hydronic heating system.  I can get one from Darin, but he quoted me MSRP and it is an expensive part.  I wasn’t having much luck so I called Butch mid-evening to discuss the situation.  He suggested that I hold off on getting a new ignition coil until I got the coach to his place and we were able to look at it more carefully.  He said I should have had white smoke and a definite smell from the atomized but unburned diesel fuel.  I didn’t which made him wonder if the problem might be fuel delivery rather than ignition spark.  Good advice, as always.  I don’t know enough about the control circuitry on the Aqua-Hot (it’s actually a Webasto inside) to know how the operation of the spark and fuel solenoid might be intertwined.  I have the manuals, but I have not had time to dig into them.  Besides, I have enough other things to work on right now that I am willing to let this one go for a few more weeks.