Tag Archives: FMCA GLCC Ch

2016/04/11–15 (M–F) Water Pumps on the Road Again

1 Reply

2016/04/11 (M) Parts Run

I was up at 7:30 AM, so I slept over seven hours last night, and felt like I had slept well enough to take on the day I had ahead of me.  I fed the cars, put fresh water in their bowl, and cleaned their litter tray.  I also cleaned part of the shower as one of them has developed loose stools in the last couple of days and has not always made it to the tray in time.  I moved the SunPass transponder, Garmin GPS, and my sunglasses to the car in preparation for my trip today.  By the time I had done all those chores Linda was up and both used our iPads for a while.  I was not going to make coffee this morning since I had a long drive ahead of me sometime today, but Linda wanted some so I made it and had some myself.  We eventually had bagels for breakfast.

I called Action Mobile around 9 AM and talked to Service Manager John Provo.  He expected my three brake calipers to be delivered between 10 AM and noon but that was just a guess on his part.  Rather than make an issue of getting a more accurate ETA I decided I would leave at 10 AM for the two hour drive from Williston to Orlando.  I went out after breakfast and unloaded most of the stuff in the back of the car and stored it on the picnic table.  I then walked to the resort office to let them know we were expecting a package from Amazon today.

Just before 10 AM I wrote out a short grocery list as I planned to stop on my way back from Orlando at The Publix supermarket on US-27 by the Ocala exit (#354) of I-75.  I took my iPad in case I needed to kill some time at Action Mobile, and actually left a little after 10 AM.

The trip down was smooth, with no traffic issues, and it was uneventful except for a text message from my sister asking me to call our broker and transfer funds for our dad.  Based on when I received it the best I could do was pull into one the Florida Turnpike Service Areas closest to Orlando’s northwest corner and call the brokerage.  The person I needed to speak to (Maggie) was on another call and I did not want to deal with a return call while driving so I left a message that I would call again when I got to my destination, which was still 20 minutes away barring any unforeseen traffic problems.

Traffic was thicker and a little slower as I neared Orlando but it moved along well enough and I reached Action Mobile just after noon.  I called Maggie again and got her this time as she is in the Central Time Zone.  Maggie is our broker’s office manager and is also a registered agent.  We have an extremely good relationship with her and our broker, John, so we chatted briefly before I gave her the transaction details.  I then texted my sister back to let her know I had taken care of her request.

I went inside and found John P. (the Service Manager).  The parts were not there yet so he called Rex at Rush Trucking to check on them.  Rex said they should have been there and made a call.  Not too long after that a white can showed up and the driver unloaded three Meritor boxes of the right size, shape, and apparent weight, and took off.

It occurred to me that I should check the parts before paying the balance and taking off myself so I opened all three boxes.  I was expecting one of the castings to have an “L” in the casting number and the other two to have an “R” in the casting number, but all three had “L”s and that caused me some concern.  I also noticed that one of the calipers had both grease fittings broken.  John P. called Rex back and Rex explained the Left and Right calipers used the same (“L”) casting.  The difference was in the helical drive shaft and gear inside, and difference was reflected in the part number on the box label.  The left side caliper part number began with “A 1” while the right side caliper began with “A 2.”   (The shaft for the calipers on the left side of the bus rotate clockwise, as viewed from the end where the slack adjuster attaches, while the calipers for the right side rotate counterclockwise.)

Rather than have Action Mobile remove and replace the damaged grease fittings Rex had a different left caliper sent over as he did not want to risk a small piece of debris falling inside the mechanism.  When the driver dropped it off I checked the label and the grease fittings.  There were OK, so he put the damaged one in his van and left.

While I was waiting I called Butch and gave him the information on how the left and right calipers were labeled.  He is working with someone at ABC Bus in Muncie, Indiana, who is working with someone at Rockwell-Meritor, who says we can still get these parts with a 45 to 60 day lead time.  I’m guessing that these are also rebuilt/remanufactured calipers, not new ones, but at this point in time we don’t really know.  He was quoted a price that was $200 less per caliper than I paid, but I have mine now, not two months from now; if in fact I could get them.

Bill, the mechanic who fixed our left tag axle brake last week, was taking his lunch break so we got to chat a bit.  John D. (the owner) was also around so we also got to chat for a little while.  I was running behind the schedule I had hoped to keep, so I loaded the three boxes into my car and went inside to pay the balance of the bill.  A quick chat with the billing clerk, Lisa, and I was on my way back to Williston.  It was 1:30 PM and I figured I would be back by 4 PM, including my stop at Publix.

I stopped at the Florida’s Turnpike Turkey Lake Service Area for some lunch but just ended up getting a frozen coffee thing at Dunkin Donuts.  Traffic moved along nicely all the way onto northbound I-75.  I had just passed exit 341 and was just 13 miles short of exit 354, when traffic came to a complete standstill.  The backup stretched as far as I could see in front of me and the flurry of emergency response vehicles driving up both shoulders meant there had been a serious accident somewhere up ahead.

It took at least an hour to reach the accident scene, where police had closed all three lanes of the highway.  All of that of traffic, which included two lanes of nose-to-tail tractor-trailers, had to funnel onto the right shoulder to get around the blockage.  The accident looked really bad and appeared to have involved at least a motorcycle, a large Suburban-like vehicle, and a utility trailer.  There may have been other vehicles involved that I did not see as I drove past or that had already been moved, although I doubted that.  There was no sign of the people involved and I presume they had already been transported from the scene by ambulances or helicopters.

Once I was past the accident I had clear sailing the rest of the way, but from the accident scene north the southbound lanes of I-75 were also completely stopped.  There were also emergency vehicles on the southbound side of the highway, but it did not appear that any of the accident was over there.  I exited I-75 at exit 354 (Ocala, Williston), made a left onto US-27, and pulled into the strip mall on the right where the Publix supermarket is located.

I took my short list of grocery items and went in.  In an unusual move for me I found everything on my list except for one item and did not buy anything that wasn’t on my list.  The only thing I could not get was fresh blueberries, which is odd because just today I had seen billboards advertising the Florida Blueberry Festival as running from April 11 – 16 in a town nearby.  Maybe all of the available blueberries were being routed to the festival?

I was back at our rig around 5:10 PM.  After getting the groceries inside, I turned my attention to reloading the car.  My first task was to transfer the new (to me) A1/Left caliper to the box the DS tag axle caliper came in last week as the box the new caliper came in was in very bad condition.  Linda found our roll of bubble wrap under the bed and I used pieces to protect the grease fittings on the top of each of the three new (to me) calipers.  (I say “new (to me)” because I believe the four calipers I have purchased are all rebuilt, and possibly even remanufactured.)

With that taken care of, I moved a couple of low boxes from the picnic table to the car and put them on the floor behind the two calipers that were behind the driver’s seat.  I then moved the tire covers from the front passenger seat and put them on top of the boxes.  The covers are a soft nylon mesh material which I figured would provide additional protection for the grease fittings.

We disassembled the damaged box to get flat cardboard pieces to use as a cushioning layer on top of the two caliper boxes that I had put inside the wooden storage structure.  The reason for all of this was that I had to store other boxes on top of the caliper boxes and, having received one that had damaged grease fittings, wanted to make sure I was not responsible for causing similar damage.  I had already taken the precaution yesterday of moving heavier items to the front bay of the bus, leaving lighter items for the car.

With the car repacked I opened the box from Amazon, which Linda said arrived around 10:30 AM, to verify that it was the correct Shur-Flo 4048 fresh water pump.  It was the correct box so I left it at that and we went for a long, slow walk around the resort.  When we concluded our walk we sat outside for a while and doodled on our iPads.  John and Ali returned around 6:30 PM.  As we suspected, they had gone out to dinner.  We presumed they had gone to The Blue Highway, but they had gone to The Olive Garden in Gainesville instead.

For dinner Linda made sandwiches with vegan deli slices and lots of greens, kind of like a salad on a bun, and sliced up a Honey Crisp apple.  It was a simple, easy meal, but it was all good.  As the hour approached 8 PM and the light faded we went next door to visit with John and Ali.  Earlier in the day John had taken one of his propane tanks over to be refilled but the person responsible for that task had not taken care of it.  When he tried to light the propane firepit it would not ignite.  We could smell the gas, and hear the spark, but if the tank was near empty it probably did not have enough pressure to make it work.  No problem; the conversation, if not the “mood,” was just as good without the fire.

It was a warm, still evening and there were more bugs out than the last few nights.  Everyone was tired by 10 PM and we all retired to our own rigs.  We watched the end of NCIS-LA and the beginning of the news and then went to bed.  I watched the beginning of The Late Show with Stephen Colbert to see Steve Martin and Edie Brickel, and then went to sleep.  Although I had not really done very much it had been another long, and somewhat stressful, day.

2016/04/12 (T) Water Pump Up

I got up at 7:30 AM and quietly took care of the cats’ food, water, and litter tray.  I measured out the beans for our morning coffee but waited to grind them until Linda was up.  I updated my spreadsheet for GLCC parking at the upcoming FMCA GLAMARAMA16 rally in June and then continued working on my blog post for yesterday.  When Linda got up at 8 AM I finished making the coffee.  We then spent a couple of hours engaged in our usual morning routine of using our iPads while enjoying our coffee and having granola with fresh strawberries for breakfast.

By 10 AM we were dressed and I got to work replacing the fresh water pump.  The pump is a Shur-Flo 4048-153-E75.  It is a 4 GPM (max), 55 PSI (max), self-priming, 12 VDC pump with thermal overload protection and the ability to run dry without damage (although our friends, Butch and Fonda, discovered that it cannot do this for an extended period of time).  Shurflo also makes this pump in 24 VDC and 120 VAC versions.  I am seriously considering adding a 120 VAC pump to the water system when I redo the utility bay, but I would like something a bit more robust.  I seem to recall that Chuck has a Paragon AC powered pump in their Liberty conversion and it impressed me as a very serious piece of equipment.

Since the new water pump was an exact replacement for the failed one installation was very straightforward.  I shut off the incoming fresh water line as a precaution and had Linda make sure the pump power was switched off.  I then disconnected the two power leads which I had wired using mating insulated spade connectors.  There are two fresh water supply lines, each of which gas a 1/4 turn shutoff valve, so I closed those.  (The conversion had two domestic water pumps plumbed in parallel when we first bought it.  I replaced them with a single 4048 and removed the surge tank at that time as Shur-Flo recommended not using one with the 4048 pump.)  The threaded water line connections to the pump are plastic and only hand tightened, so were dealt with easily.  Before removing them I got a towel to absorb the water that was inevitably going to drain out of the lines.  Once the lines were off I removed the four screws that secured the unit to the floor through the rubber shock mounts.  The unit was now completely disconnected and I was able to remove it.

The new and old water pumps along with tool boxes and other stuff needed to make the repair.

Installing the new unit was basically a matter of reversing the steps just described, more or less.  I  needed to attach the proper insulated spade connectors to the power wires on the new pump.  I found my spade lug kit and even though I had a variety of connectors I did not have the ones I needed.  Fortunately there is a NAPA Auto Parts Store very close to Williston Crossings RV Resort and auto parts stores are an excellent place to find a large variety of spade connectors.  It’s walking distance to the store, but I drove there to save time.  I bought several different packs to make sure I had what I needed.

Back at the bus I prepared the power leads and set the new unit in place.  I connected the water lines first as it was easier with the unit loose.  I connected the power leads and then screwed the unit to the floor.  The new pump came with a strainer and adapter fittings.  I used the new strainer bowl to replace the old one, in which I found little curly queues of plastic.  I opened the two shutoff valves and then had Linda turn on the power to the pump and open the kitchen faucet so that both the hot and cold lines were open.  The unit came to life and water flowed, albeit with a sputter until all of the air was out of the lines.  With that, the water pump problem was fixed and I cleaned up the work area and put my tools away.

Next on my task list was checking tire pressures.  I really did not want to check all 12 tires with the digital gauge so I turned on the TireTraker TT-400 TPMS and waited 20 minutes for the readings to update.  Although the sensors are not “dead on” accurate they are close enough to let me know if a tire has lost enough air to require topping up.  They all appeared to be OK so I did not have to get out the air-compressor and air hose.

Barring any further unforeseen circumstances this was our last planned night in Florida for the 2015-16 winter season.  We wanted to go to Satchel’s in Gainesville for pizza one last time.  We decided to have an early dinner and take care of a couple of errands so we left at 2 PM.  Our first stop was at the Kangaroo filling station for gasoline.  Our next stop was Pet Supplies Plus in the Archer Road mega strip mall shopping complex.  We also stopped at the CVS pharmacy in the same complex and then drove to Satchel’s on the east side of town.

Although it was a lovely afternoon, weather wise, we chose to sit inside.  At Satchel’s we had our usual meal; an excellent salad and a pizza with mushroom, onion, sun-dried tomato, and Daiya non-dairy cheese.  It is, quite simply, one of the three or four best pizzas we have ever had, and it is vegan!  We got their largest pie and brought most of it home.

When we got back to Williston Crossings John and Ali were not around and we figured they had gone out to dinner again.  Happy hour usually takes place at Jeff and Kathy’s 5th wheel so we walked down there to visit for a while.  John and Ali eventually returned and as evening fell over the resort we went next door to sit around their propane campfire and visit.  Smitty made a large bowl of popcorn popped in peanut oil and lightly salted with Hawaiian sea salt.  Yum. Note for T 20160412 blog post.  Jim and Janet Rawley came over to John and Ali’s site to visit and John played his guitar and sang for a while.  Jim’s professional name is “Sonny Fox” and he was a big time rock ‘n roll D. J. during the ear when radio stations started playing “album rock.”  Jim quizzed me about my musical background and the first record (45 or LP) that I bought but I had no recollection of that.

We returned to our rig just before 10 PM and were in bed, with the lights out, by 10:30 as we planned to pull out of our site around 7 AM in the morning.  Tomorrow we head north and leave Florida.

2016/04/13 (W) Unbalanced Travel

I set an alarm for 6:20 AM and we got up at 6:30 and got dressed.  Today was a travel day so we did not have coffee or breakfast.  While we prepared the interior of the coach for travel I encountered a problem with the 12 VDC charging plug for the Rand McNally TripMaker RVND 7710 GPS unit.  A small threaded plastic insert, which holds the spring-loaded +12V center contact, had broken and could not be repaired on short notice (if at all).  The two lower 12 VDC “cigarette lighter” outlets were dead again and it occurred to me that the failed plug might have been responsible for shorting the outlet and blowing the supply fuse last Wednesday.  Not realizing this at the time, and desperate to get the GPS back into service, I vaguely recall having plugged it into one of the upper outlets and probably shorted it out too.  I replaced all of the blown fuses last Wednesday but did not realize at that time what the root cause was and was rather perplexed by the failure, which reoccurred on the lower pair of outlets.

I removed the R-M GPS from its usual mounting position (on the driver side lower windshield next to the center pillar and resting on the top of the dashboard cover) and set it aside and I installed the Garmin 465T GPS unit in its place.  I took care of the remaining outside tasks of disconnecting/storing the shorepower cord, connecting the chassis batteries, and opening the auxiliary air supply valve for the engine accessories.  Linda moved the car to another site so it was out of the way as I started the bus motor and aired up the chassis (brakes and suspension).  She then spotted for clearance from obstructions as I slowly and carefully pulled out of our site.

We wanted to be on the road at 7 AM but it was about 10 minutes past the hour when I finally pulled out of the site.  Our friend and neighbor, John (Smitty) Smith, was up and outside to wave goodbye, which was nice.  I proceeded north through the resort on Covered Bridge Road and Linda followed in the car.  We drove through the covered bridge, for which the road is named, and stopped just short of the north bath/laundry building to hook up the car for towing.  There are no park model trailers or RV sites close to this location, so we knew we could hookup here without bothering anyone.  With the car attached we double checked the settings and then did our light check.  Everything was OK so Linda got into the coach and we set our destination in the Garmin GPS unit.

We finished our slow roll through the RV resort, out the back/northwest gate, and pulled out onto FL-121 headed northeast towards Gainesville.  About two miles from I-75 we encountered stop-n-go traffic.  The morning rush hour in Gainesville was underway and was something we had not previously experienced.

Linda kept a close eye on our tire pressures and temperatures, especially the driver side tag axle, as we rolled along.  We stopped at the Pilot station at Exit 460 and took on 60 gallons of diesel fuel.  That was our last stop until we got to the end of our trip for the day.  I would have liked to note here that the trip was uneventful but, alas, that was not the case.

The drive up I-75 through northern Florida and southern Georgia is generally an easy one, without any serious grades to climb or descend, attractive enough scenery, and reasonable traffic volumes except during the April 1st northward snowboard migration.  As we got to the Macon, Georgia area and then on up to Atlanta, traffic was heavier but moved along.  Somewhere along the way the Battery Balance (BAL) light came on, flickering at first but then staying on.  Not good.

The Battery Balance light is controlled by a Vanner Battery Monitor Module and is supposed to indicate that the “12V” center tap on the battery bank is not within +/- 0.75 VDC of 1/2 of the voltage between the “24V” terminal and ground.  The relationship of these voltages is supposed to be regulated by a pair of Vanner Voltmaster Battery Equalizers.  It is normal for this light to come on occasionally, especially when starting the motor, but it is not normal for it to come on and stay on.  Assuming the monitor module is not defective, it means the 12V center tap is out of tolerance with respect to the 24V terminal and implies that the Vanner equalizers are not doing their job.  Ugh.

Having the yellow Battery Balance (caution) light come on immediately added stress to the trip but when the red Hi/Low Battery (warning) light came on the stress level went way up.  This light is also controlled by the Vanner Battery Monitor Module and is (supposed to be) activated if the voltage at the “24V” terminal (relative to ground) is less than 24V or more than 30V.  Voltages outside the 24 – 30 VDC range could indicate a malfunction of the voltage regulator and/or engine-mounted alternator.  Either one would be a problem that could put the bus on the side of the road as the engine is controlled by a computer that is powered by the chassis battery 12 V center tap.

The normal full-charge resting voltage of a “24V” lead-acid battery is 25.2 VDC (12 cells in series at 2.1 volts per cell) and the normal voltage at the 24V terminal with the motor running is around 28 VDC, so the 24 – 30 VDC range is a reasonable one. I also have 24V and 12V analog battery voltage gauges in the dashboard that are connected to the batteries independent of the Vanner Battery Voltage Monitor Module.  While they would also show high or low voltage conditions, and, by comparison, a battery imbalance condition, it is appropriate to have warning lights to get your immediate attention as you might not notice the gauges for a while.  What was odd about this situation was that the 24V gauge was sitting at about the 29V position and the 12V gauge was sitting at about the 14V position.  I knew these gauges worked because they do not always show these readings, but I did not know if the readings were accurate.  They are, however, close to what I normally see, and they do not usually result in caution or warning lights.

We left I-75 (GA) at exit 296, Cassville-White Road, drove 0.2 miles east to the Pilot truck stop, and got in a long to wait for a pump.  When it was finally our turn I added 92 gallons of diesel fuel.  From the truck stop we drove west back towards I-75 and continued 0.5 miles on the other side of the highway before turning left into the Cartersville Castle-White KOA.  Linda was hearing and speaking well enough by now to be able to register us, which is normally her job.  We were escorted to a water/electric pull-through site in the center of the park with less than ideal access but I was able to get in and park the bus.  We leveled as best we could, shut off the engine, batteries, and air and then plugged in the shorepower and turned it on.

Linda made a really good salad for dinner and we each had a piece of leftover pizza, slightly warmed.  Yum.  After dinner I made calls to Joe Cannarozzi, Ed Roelle, and Butch Williams and sent a text to Pat and Vickie Lintner.  Joe was working on a coach in Williamston, Michigan and was looking for a local facility that could service the over-the-road air-conditioning system.  Ed has been around converted buses in Michigan for a long time so I contacted him to see if he had any suggestions for Joe.  We went for a long walk around the campground during which I had a long chat with my sister.  When we got back to our coach I exchanged text messages with Smitty back at Willison Crossings RV Resort.

Our TV options were limited but we were able to get PBS, so we watched whatever was on.  We planned to pullout out of our site at 7 AM, which meant we had to be up around 6:15.  Not that we have that much to do, but we do not like to rush through our morning routine.  We were in bed with the lights out by 11 PM.

2016/04/14 (R) A Relatively Smooth Run

There was a possibility of rain last night so we closed all of the roof vents and narrowed the window openings before we went to bed.  I set the alarm on my phone last night for 6:15 AM this morning, but I was aware of the rain, and woke up around 4 AM when I heard one of the cats making a strange noise.  I wanted to turn on the electric engine block heater anyway so I got up and did that, checked on the cats (they were fine), and went back to bed.  I tried to go back to sleep without complete success.

We finally got up to stay at 6:30 AM and got dressed.  I had an e-mail from Gary at BCM that needed a reply and cc:d Dave Aungier.  I also texted Dave as he was who Gary needed to contact.  I shut down all of the technology and packed up my computer while Linda cleaned off counters and secured windows.  The car was already connected for towing so we just had to go through the towing procedure and double check it.  I disconnected and stowed the shorepower cable, connected the chassis batteries, and opened the air valves in the engine bay.  I started the engine and we did the light check while the chassis aired up.  Since it was 7 AM we tried to avoid idling any longer than necessary before pulling out.

We were in an angled water/electric site in the middle of the campground with fairly tight ingress and egress.  I raised the tag axle so shorten the turning radius and pulled out while Linda kept an eye on the driver side front corner.  I had to get the driver side nose of our coach fairly close the passenger side rear corner of the 5th wheel trailer directly in front of our site in order to get our passenger side rear end and toad to clear a tree on our site and a post near the road on the next site to our passenger side.  I also had to avoid the rear end of the next 5th wheel trailer and the picnic table in-between them.  Fun.

Without being over-confident, I think I have gotten a lot better at maneuvering the bus in tight situations.  That skill has come with some good teaching, some practice, and at the expense of two mistakes that caused some damage, but it certainly paid off this morning.  Once I was cleanly out of our site and into the road I stopped and put the tag axle down.  Linda got on board and we rolled slowly out of the center of the campground and headed for the exit.  We stopped before exiting so Linda could find Juniper.  We knew she was onboard, but we wanted visual confirmation before pulling out.  Linda found her under one of the living room captain’s chairs, and we were on our way.

We recharged the Rand-McNally GPS last night using a 12 V car outlet splitter with USB ports and a compatible USB cable that I borrowed from the Sony a99v DSLT camera.  Linda turned it on and entered the address of today’s destination to verify that the unit was working.  It was, so I set it up on the dashboard by the windshield center pillar so it was ready to go this morning.

Our route took us north on the final 70 miles of I-75 in Georgia to Chattanooga, Tennessee where we headed northwest on I-24.  I-24 was mostly in Tennessee, but dipped back into Georgia briefly as it swung around the southern side of a mountain.  Unless you head far to the west on I-10 before turning north, there isn’t a practical way to get back to Michigan from Florida without crossing mountains.

As you head north from Florida on I-75 the ground rises steadily.  As you approach Atlanta it starts to get hilly, and that continues north of town all the way to Tennessee.  As soon as you head west on I-24 you are perpendicular to mountain ridges running SW to NE.  The highway winds around these ranges, sticking to valleys as much as possible, but inevitably there comes a point where it simply has to go over the top.  And so it did.  I think the grade was at least five miles long, perhaps seven, with lots of turns but nothing I would call a switchback.  The road surface was excellent with wide lanes and truck lanes.  The grade was just steep enough that I had to climb it in 4th gear doing around 50 MPH at 2000 RPM with 14 to 15 PSI of turbo boost.  With cool outside air the engine coolant temperature never rose above 195 degrees F, which is its normal operating temperature (on the gauge) and I was very pleased with the way the bus ran.  Replacing the turbo boost sensor tube last year was no doubt partly responsible for this performance.

The temperature was in the low 50’s when we left the Cartersville Castle-White KOA around 7:15 AM and we ran through cool temperatures under overcast skies, with intermittent drizzle and fog, all the way over the mountains in southwest Tennessee.  Once we were on the northwest side of the mountains the cloud cover started to break up and reveal patches of blue sky.  Somewhere southeast of Nashville we encountered our last raindrops and by the time we merged onto northbound I-65 we had clear, blue skies.  Traveling “north” from late morning to early afternoon we had the sun at our backs, making for a comfortable cockpit without using the air-conditioning.

I was concerned about the issue we had yesterday with the Battery Balance (BAL) telltale caution light and the Hi/Low Battery (Voltage) telltale warning light and presumed it would reoccur today.  In order to reduce the chance of that happening again today I tried to minimize the power draw from the +12 VDC center tap of the chassis batteries and perhaps cause an imbalance between the upper and lower halves of the battery bank.   To that end I did not use the cockpit HVAC fan and kept the headlights off as much as possible.

We had a pretty smooth run all the way to and through Nashville.  Pat and Vickie had alerted us to “construction on I-65” but were not more specific.  North of Nashville we encountered a major construction project that lasted for at least 20 miles.  Traffic flow, however, was very smooth if a bit slower than normal posted speeds.  As we approached Louisville we saw signs announcing major construction ahead and advising I-283W as an alternate route.  We were less than 15 miles from our destination and needed to take the second exit just after the bridge so we rejected the alternate route suggestion and stayed on I-65.  The construction was, indeed, major—the reconstruction of a bridge over the Ohio River—but we made it through without having to stop.  The campground website had very specific and detailed directions on how to exit I-65 and we followed them instead of the GPS.  We were momentarily confused after exiting, never a good thing when driving a bus in an urban area, but we were in the right place and made the last couple of turns to get to the Clarksville KOA campground without difficulty.

Linda checked in at the office and the woman at the desk lead us to a pull-through site that was very easy to get into but might be challenging to exit in the morning.  We were sitting level without having to adjust anything so I shut off the engine and we went through our usual arrival routines.  Linda then walked over to the office and finished registering us.

We walked the park, which was not large, and scoped out our departure route and any possible problems.  The sites here are closely spaced, the roads are a little narrow, and some campers are parked with their vehicles sticking part way out into the road.  Some of the people camped here appeared to be younger men who were itinerant workers.  As such, we suspected they might be gone in their cars before we pulled out in the morning.  If so, we will probably get out OK without having to unhook the car, but I doubt that we will ever return here.  While the location is convenient to I-65 and Louisville, the park itself is not worth the $50 a night they charge.  If not for the location, it wouldn’t be worth half of that.

We did not plan to unhook the car to explore the area and there did not appear to be anywhere to walk although Vickie had texted us that we were only a half mile from the river and there was, in fact, a nice walk down to there.  Even so, we were tired and perfectly content to retire to our coach, have dinner, and watch our favorite Thursday evening CBS comedy shows.  We went to bed at 11 PM as we planned to be on the road at 7 AM so we could be at Butch and Fonda’s home in Twelve Mile, Indiana before noon.

2016/04/15 (F) Back In Twelve Mile Again

I set the alarm on my smartphone last night for 6:30 AM this morning.  Like last night, I woke up around 4 AM, turned on the engine block heater (electrical), and tried to go back to sleep.  I was awake again before 6:30 and the alarm was just my signal to actually get out of bed and get dressed.  Linda woke up with the alarm and was also up and dressed fairly quickly.

As usual for a travel day, we did not make coffee or have breakfast and instead set about preparing the coach for travel.  I had turned off my computer last night so all I had to do was pack it up.   We also left the car and bus connected together, so all we had do was check the connections and go through the towing procedure.  I turned the block heater and Aqua-Hot electric heating element off, disconnected the shorepower cord and stowed it, opened the auxiliary air supply valves, and started the main engine.  We did a light check while the chassis aired up and then Linda climbed aboard.

I was concerned about getting our rig out of the small, tight site and through the narrow interior gravel roads of the campground, but our neighbor’s to the left moved their truck before they went to bed last night and the guy directly in front of us on the other side of the street left in his car just before 7 AM, presumably to go to work.  That meant I had plenty of space to pull forward and to turn to the left, which is the direction the site was angled.  By 7:25 AM we were exiting the park and on our way to Twelve Mile, Indiana.

Although we had less than 200 miles to travel today, I-65 continued to be one long construction zone with lots of very rough surfaces which made for more difficult and tiring driving.  In-between Clarksville and Twelve Mile was Indianapolis, so that meant major urban traffic.  “Indy” is a major shipping hub with a good, but extensive highway system.  I-465 circles the metro area while I-65, I-69, I-70, and I-74 all tie into it, along with several U.S. highways.  The speed limit is 55 MPH and most drivers seemed to obey it, which made for easier urban driving, but there was still a LOT of traffic.

As we got on the north side of town headed west we were looking to exit onto US-31 north.  The GPS told me to exit at Keystone Avenue and turn right onto the relatively new Keystone Parkway, which bypasses the initial stretch of US-31 before joining it some miles farther north.  Fortunately I spotted a sign before exiting the highway that said vehicles over 19,000 pounds GVW were not allowed on the Parkway.  Also fortunate was that I knew the exit for US-31 was only a couple of more miles ahead and was a perfectly acceptable place for us to get off of I-465.  I had not been this way in a while and discovered, to our pleasant surprise, that it is a completely new, limited-access highway heading northbound.  Sweet.

We handled the situation smoothly and without too much consternation, but it was concerning that our GPS tried to direct us onto a road for which we were too heavy by more than double.  That had us wondering if the RV characteristics parameters were not set correctly, and perhaps got reset when I updated the unit while we were at Florida Grande Motor Coach Resort, but now was not the time to check all of that.  This is a relatively recently rebuilt roadway, and it was been my experience with both GPS units that the map updates do not include these newer roads.

Another possibility was that the Indiana Highway Department has not updated the state road database as that is where Rand-McNally (and other mapping companies) get the information for their road maps.  I encountered this a while back when traveling US-24 from Peru, Indiana to Defiance, Ohio.  Even though my GPS database was up to date, it had no knowledge of the new construction between Ft. Wayne, Indiana and Defiance.  The same us still true of the new stretch of US-31 running south from US-20 for many miles even though it has been open for quite a while.  The State highway departments are responsible for updating the database that the GPS/mapping companies use.  If they do not update the database there isn’t much the GPS/mapping companies can do.

Indiana has made major improvements to US-31 over the last 3 to 4 years, building whole new limited access sections.  Besides the section coming south from US-20 and the section going north out of Indianapolis, there is one that now bypasses Kokomo.  The older sections are four lane divided but have grade crossings and occasional traffic signals.  They are posted at 60 MPH and traffic is usually light and moves along well.

All-in-all we had an easy final leg from Indy up to State Road 16 and west into Twelve Mile.  At 11 AM, just 3-1/2 hours after we pulled out of the Clarksville KOA we were back in Twelve Mile again.  We pulled into the gravel driveway for the grain elevator, which is not in use this time of year, to unhook the car.  The driveway is exactly opposite where I park the bus when it is here and positions me to basically back across SR-16 into our spot next to Butch and Fonda’s bus.  Linda spotted for me as I backed across SR-16 and into our spot.  I leveled the coach, shut off the engine, and took care of the exterior arrival tasks while Linda took care of the interior ones.

Butch and Fonda did not come out of the house and we were not sure they were home.  We usually have a very poor Verizon signal when the bus is parked in this spot, and today was no exception, but I was able to get our Verizon Mi-Fi online.  About that time Butch and Fonda came out to check on us and we visited for a while.  We had not knocked on the door because we knew there was a possibility they might not be home when we arrived.

Butch needed to be at a local county fairgrounds at 5 PM to help set up a large room for a hamfest tomorrow.  Fonda was reviewing for the General Class license exam, so Linda studied her Amateur Extra Class flash cards with Fonda while Butch and I went to the do the set up.  The hamfest was an annual joint event put on by four county amateur radio clubs.  After the tables were all set I helped Butch carry in all of the stuff from his truck and arrange it on three adjacent tables.  When we were done, and there was nothing else to do, we returned to Twelve Mile.

It was 6:30 PM by the time we got back and we decided to go out for dinner even though the options for us are very limited.  We drove to Rochester hoping to eat at a Mexican restaurant but it was closed (permanently).  We ended up at Tweedle Dee’s instead, mostly because they have a salad bar.  We were the last diners to leave and only then because they needed to run the vacuum cleaner which cut off any chance of Linda hearing any further conversation.  We stopped at Butch and Fonda’s new (to them) house on IN-25 in Metea but Butch did not have the key with him so we did not get to go inside.

By the time we got back to Twelve Mile we were all tired.  Butch and Fonda had to be up very early to go to the hamfest so they signed their tax returns, got them ready to mail, and brought them to our bus for Linda to mail in the morning.  I planned to go to the hamfest too, but not first thing in the morning.  I also wanted to take our car so I could come back to Twelve Mile before the hamfest ended at 1 PM.

Our series of equipment failures seems to be continuing as I was unable to get the Amped|Wireless SR20000G router/network-extender to recognize any hard wired devices.  I tried plugging in both my computer and our NAS to all five of the ports but none of them responded to either device.  It’s unlikely that the wired networking had failed on both the computer and the NAS so the failure of the SR20000G is the more likely cause.  The SR20000G’s wireless networks are still working but the loss of the wired ports means I cannot access the NAS.  Fortunately we will be home in a few days and I can try to sort this out in the comfort of my office.

Being tired, and with no TV reception, we were in bed by 10:30 PM and I was asleep by 11 with no alarm set for the morning.

 

2015/12/29 (T) Arcadia Rally (Day 1 of 3)

Leave a reply

Although sleeping conditions were not as comfortable as they should have been with the air-conditioners running we apparently slept OK.  Linda was up at 7 AM and I got up around 7:30 to dense fog.  Yes, the RH outside was 100%.

The rally officially started today with breakfast from 7 to 9 AM so we got dressed and walked over to have coffee and a bagel.  We ended up talking to Scott Crosby, Jim Seagraves (another GLCC guy), Paul and Claudine Elbisser (also from GLCC), and a couple of other guys, one of whom was from British Columbia.  Bus conversions are a tiny fraction of all RVs, but folks who own them have a strong affinity for the company of other folks who have them, and will travel considerable distances to get together with them.  We lingered quite a while before returning to our rig.

There was a nice breeze that made for comfortable conditions under our patio awning so I sat out there and wrote the draft of my blog post for yesterday and then started on today’s post.  Linda went for a walk with her iPod and then returned to sit outside and read.  We went inside around noon and Linda made vegan grilled cheese sandwiches with sliced tomatoes, greens, and onions.  Vegan comfort food.

Linda went back outside after lunch but I stayed inside and reviewed Part 1 of my 2-part article on Habitat For Humanity for RVers in the draft copy of the February 2016 issue.  I annotated the PDF using the Acrobat Reader Sticky Notes feature and e-mailed it back to Gary and Jorge.  I then joined Linda outside and studied the manual for our Sony flash unit.  I needed to use it tonight but had not put batteries in it, mounted it on the camera, or otherwise had a chance to use it since I bought it from B&H Photo back in October.

Tom Mason came by on his bicycle around 1:45 PM reminding folks that the ice cream social was at 2 PM.  Although we were certainly not going to have ice cream we walked over just to be sociable.  When we got back from the social I got the first boxed set of Bus Conversion Magazines out from under the bed.  I then gathered my camera, flash unit, and external battery pack and sat on the sofa with them, and the manuals, and figured how to connect and set everything.  Linda was working in the kitchen making her chickpea salad for our dinner and it was darker than usual in the coach as we have the skylights blocked, the awnings out, and the shades down to block the sun.  I took a few test shots with the flash and it seemed to work well so I called it good for now.

Linda makes Chickpea (Garbanzo bean) salad while I test the new Sony flash unit with the a99v camera body.

Linda makes Chickpea (Garbanzo bean) salad while I test the new Sony flash unit with the a99v camera body.

We eventually had chickpea salad on greens for dinner with a slice of bread on the side (with vegan buttery spread).  We left at 6:30 PM and walked to the event building.  I carried the camera/flash combo and Linda carried the box of magazines.  I found Bill and Brenda at the back of the room going over the opening ceremonies with master of ceremonies John Vickery.  Part of the discussion was about the door prizes and we gave them the box of magazines (1 of 3).  I started to explain what was in the box and John asked if I would just stand up and explain that when the time came, which I agreed to do.

Announcements and door prizes started at 7 PM.  There were a lot of door prizes and David Evans won the first boxed set of Bus Conversion Magazines.  I got a few photos of him accepting the box and got his name later.  He was a subscriber in the past but has not subscribed since Gary Hatt acquired the magazine in 2012.  David is here in a 1948 GM PD3703 which, along with Scott Crosby’s 1948 Silversides and Don and Sandra Moyer’s 1948 Spartan, has to be one of the oldest converted buses on the road in North America.

The entertainment for the evening was a 4-piece bluegrass band.  They were very good, and played until 11 PM with only two short breaks.  There was only a small audience left by the time they finished but it was an appreciative group.  After the evening entertainment was concluded we wandered back to our rig and tuned in the WINK weather sub-channel (11.2) which covers southwest Florida.  Linda was up until midnight, very late for her, and I finally went to bed at 12:30 AM and turned the lights out just before 1 AM.

 

2015/09/22 (T) Bench Work

Leave a reply
Linda scraps the old wallpaper off below the passenger side living room window.

Linda scraps the old wallpaper off below the passenger side living room window.

We were up at 7:30 AM and had fresh grapefruit and cinnamon raisin toast for breakfast.  We turned the fireplace on and drank our coffee in the living room.  After taking care of a few chores we got to work on the bus.  Linda started stripping the old wallpaper while I finished soldering two 45 degree copper street elbows.  I then got my tools out and gathered up supplies I needed to disconnect the fan-coil heat exchangers and heater hoses.

I started by trying to connect a 1/2″ i.d. clear vinyl tube to the drain stub on the Aqua-Hot.  The stub points straight down, is approximately 3/4″ long, and the open end is about 3/4″ above the base.  There is a hole in the base of the unit at that point, provided by Aqua-Hot for a drain line, but Royale Coach installed one of the CruiseAir condenser units directly beneath the Aqua-Hot and did bother to provide a hole in the shelf or make alternate arrangements for draining the unit.  I could not get the vinyl tube over the stub and with a limited amount of time to spend on this minor annoyance moved to Plan B.

We have had a large stainless steel photo processing tray, approximately 2′ X 3′, for years.  Today we used it to catch antifreeze and protect the new floor.  Linda got some scrap towels and we put them under all of the edges of the tray.  I then set the heat exchangers on pieces of 2×4 in the tray to keep them up out of the antifreeze.  Linda held the heater hoses as I undid each of the band clamps in turn and worked them loose from the exchangers.  We emptied the coolant from the exchangers and hoses into the tray, wiped off the heat exchangers, took them outside, and set them in the driveway.

The two fan-coil heat exchangers in the photo tray ready to have the coolant hoses disconnected.

The two fan-coil heat exchangers in the photo tray ready to have the coolant hoses disconnected.

We made sure the hose that connected the two units was drained, wiped it off, and took it outside.  This hose has bleeder valves at each end that I will have to remove as I need to reuse one of them.  We drained the two remaining hoses as best we could and put the open ends in the metal photo tray.  I bought a bucket yesterday with a gasketed lid that has a built in spout.  I picked the band clamps and pieces of 2x4out of the antifreeze and put them in the bucket.  We then carefully poured the antifreeze from the tray into the bucket and put the lid on.  We carried the tray outside and set it in the driveway and then took the bucket outside.

Linda took a break from stripping wallpaper and went to the bank to deposit proceeds from the recent rally.  There wasn’t anything else I could do in the coach and I turned my attention to cleaning up the work surface in the garage.  I took the two desk bases to the garage and started working on the installation of the grates and heat exchangers.  I had not worked through the details of this in advance so I had to figure them out now.  I started with the left base, which has an angled front.

The coolant hoses with the heat exchangers removed. We were able to contain the coolant in the tray and not get any on the new floor tiles.

The coolant hoses with the heat exchangers removed. We were able to contain the coolant in the tray and not get any on the new floor tiles.

The heat exchangers needed to be spaced up 1/2″ off the floor to better align with the openings in the sides so I cut pieces of 1/2″ plywood to put under them.  The exchangers have two holes on the bottom front edge that were probably created by Royale to mount them.  Actually, it appears that Royale mounted them upside down, presumably to position the coolant connections where they needed them.  I say they were upside down because I discovered labels on the “bottom” indicating they were made by “Vantage Products, Exclusive U. S. Distributor of Primus Hydronic Heating Products.”  I designed the desk bases so that the exchangers would mount the same way Royale had them.  As such they will remain “upside down” but it will not affect their operation.

My plan was to put 3/8″ wide by 1/4″ thick dense foam self-stick weather stripping around the edge of the discharge side of the exchangers to seal them to the base and reduce vibration noise due to the fans.  I cut the 1/2″ plywood large enough to provide room for mounting brackets to attach the plywood inserts to the base in locations that I could reach with the heat exchangers in place.  The exchangers had to be screwed to the plywood before it was set in place inside the base since the grates blocked access to the two mounting holes.

The two fan-coil heat exchangers that will go in the bases under the two desk pedestals.

The two fan-coil heat exchangers that will go in the bases under the two desk pedestals.

By now it was mid-afternoon Keith showed up and mowed the grass so I took a little time out from my work to chat with him.  When I returned to the makeshift workshop in our garage I cut the brass-colored decorative aluminum grates to size and secured them on the inside of the base using small screws.  I also wanted to add a layer of the plastic gutter mesh I bought yesterday.  After cutting the first piece to size I decided to use double stick tape.  The only tape I had was 3M Extreme Duty Mounting Tape so I drove to Lowe’s to get something more appropriate.  I found a 1″ wide clear tape and decided to try it.

Half inch wide tape would have been better so I tried cutting the 1″ tape in half lengthwise.  I removed the discharge grate, applied the tape to the edges on the back side, and pressed the plastic mesh into it being careful to keep it as straight as possible.  I then screwed the whole assembly on the inside of the base.  The screws did not like going through the tape or the mesh so I was quickly disabused of this assembly process and decided to use the tape as it came off the roll.

For the air intake grate I first screwed the metal sheet to the inside of the base.  I then applied shorter pieces of tape around the edges in-between the screw heads.  I carefully positioned the pre-cut plastic mesh, peeled the protective layer off of the tape, and stretched/pressed the mesh in place.

I needed to clean the 3/4″ copper inlet and outlet pipes on the heat exchanger so I got Linda to help me at this point.  She held the heat exchanger as I used a strip of plumber’s sandpaper to remove heater hose rubber that had stuck to the pipe.

Because of the grates on the air openings in the base I positioned the plywood spacer and then marked/drilled the holes for the mounting brackets.  I set the exchanger in place, made several alignment marks, removed the exchanger, and took out the plywood.  I attached the brackets to the inside of the base and then attached the weather stripping to the front of the exchanger case.  I positioned the case and Linda held it while I secured it with two screws.  I slipped the plywood/exchanger assembly back into the bottom of the base and Linda pulled it tight to the front while I secured the brackets to it.  One base done, one base to go.

Keith was done mowing about this time and stopped to see what we were up to and pick up his check.  He normally mows our property on Monday morning but had some service issues with his truck that put him back a day.  He had some string trimming to finish and our dinner was ready so he went back to work and we went inside to eat.  Dinner was salad and Whole Wheat ABC Pasta Veggie Soup.  The soup was a North Bay Trading Company mix that Linda got at Whole Foods.  She added kale and tomatoes to make a very tasty and nutritious dish.

After dinner I was closing up the bus for the evening and noticed that the two large MCD shades in the living room had come loose from their front mounting brackets.  This undoubtedly happened Sunday on Hacker Road as we returned from the rally in Elkhart, Indiana.  Linda helped me move one of the desk pedestals on the sofa so I could get to the shade on the driver’s side of the coach.  Once I could get to it the mounting rail snapped into the clip fairly easily but I will have to figure out why it popped out in the first place and make adjustments if needed/possible.

I checked e-mail and replied at length to one from Gary at BCM.  We then settled in to watch the season opener of NCIS and NCIS New Orleans (NCISNOLA) followed by several shows on CreateTV (PBS).  I multi-tasked, working on blog posts at the same time.

My work yesterday and today was not as physical as what we have been doing for most of the summer so it did not feel like I had done much but the evidence suggested otherwise.  These seemingly small tasks often have a lot of steps that have to be done carefully in the right order and take time to do.  There was also a certain amount real-time problem-solving and a trip to the store in the middle of the work.  I hope to finish the other base tomorrow, get both of them back in the coach, and get them plumbed with the new heater hose.  That may have to wait a day or so, however, as Linda needs to finish stripping the wallpaper in the area behind the desk and we need to hang the new paper before re-installing the desk.  There is a definite order to this work that cannot be circumvented.

 

2015/09/21 (M) Back to Bus Work

Leave a reply

We were up a little after 8 AM.  I showered while Linda prepared our breakfast fruit–blueberries, raspberries, and peaches–to go with our granola.  I made a pot of coffee, using up the Costa Rican half-caff, and then sat down to eat.  After breakfast we sat in the living room enjoying our coffee to the warmth and glow of the fireplace while Linda downloaded and installed iOS 9 on her iPad.  The download was 740 MB so I waited until the installation was done on her machine to start it on mine.

When we finally got to work our first task was to unload all of the wood from the car and store it in the garage.  My next task was to call Ferman Miller at Countertops Plus in Shipshewana, Indiana to make sure he got my message on Friday with the dimensions for the Corian top table.  I got his voice mail again and left another message.  I then called Josh at Coach Supply Direct to bring him up to date, got his voice mail, and left a message.

Linda planned to get a few things at Whole Foods Market as she needed to drive to Ann Arbor anyway to pick up our wallpaper from Delux Draperies and Wallcoverings.  While she took care of that I started figuring out what parts I needed to reconfigure the heating system.  Before making a run to the store I found all of my plumbing tools and supplies.  I got 20 feet of heater hose and 10 band clamps from O’Reilly’s and various copper fittings from Lowe’s.  I also got a drain hose and a clean bucket to catch/hold antifreeze.

Back home I removed the seat and back cushions from the sofa and stacked them on the chairs.  I removed the temporary plywood top from the desk and stored it in the garage.  I then uninstalled the desk pedestals from the wall and from their bases.  There wasn’t much else I could do without Linda’s help, so her return soon thereafter was timely.  We had a light lunch and then moved the pedestals to the sofa.  That left the bases free for me to work with.  I still did not have all of the parts I needed to install the fan-coil heat exchangers in the bases.  I also needed to remove the heater hoses in order to mount the heat exchangers and replace the hoses with different lengths and angled fittings.

As I was contemplating all of that I got a call from Chuck Spera.  He was in the process of setting up an appointment to have the lower windshields replaced on both of our rigs and wanted to make sure I was still interested and check my availability.  He called back a little while later to let me know we were set for next week Tuesday in the morning.

I then got a call from Joe Cannarozzi.  Joe has done a lot of work on our bus over the last five years, especially the chassis.  He called to confirm that I still wanted him to stop at our place on his way back to Chicago around Halloween and discuss what I needed done.  Yes, I did, and what I needed was routine maintenance; lube, oil, filter(s), brakes, and possibly axle hub seals.

When we first started working with Joe he had an active, full-time mobile bus repair business, specializing in Prevost chassis service.  The last couple of years he has worked a regular gig in upstate New York from April through October.  He still services a few buses, like ours, starting in the north in the late fall and working his way to Florida for the winter where he tries to get to the Keys and take 4 to 6 weeks off before working his way back up to New York in the spring.  When we wrapped up the call I texted Chuck to let him know that Joe would be coming this way.

I called Ferman again and this time he answered the phone.  He had gotten my two previous messages and I was correct that there was not enough material in the large sheet of Corian to make the table.  He had not had a chance to check his stock to see if he had any more of the Sandstone.  I mentioned that Josh had another vendor with a 30″ by 40″ piece.  Ferman indicated that if he doesn’t have another piece he would be willing to work with that piece if Josh got it.  I called Josh and he answered this time so I walked him through the current status.  He called the other vendor and called me back.  The piece is 30″ by 48″ and he was willing to sell it for $175.  Josh and I agreed to give Ferman a couple of days to check his stock before pursuing it.

Linda was working at her desk on a proposal for the bakery and preparing a bank deposit for our GLCC chapter.  I went to the garage and began soldering 3/4″ copper plumbing fittings.  I need to route the 3/4″ rubber heater hose around corners that were too sharp to just bend the hose so the copper fittings will take care of that.

Linda called me to dinner at 6 PM.  We had a nice salad, vegan Italian sausage with onions, and Brussels sprouts as a side.  A small glass of Moscato made a nice accompaniment.  After dinner I checked my e-mail and took care of the cats’ liter tray.  I then drove to Lowe’s for two more 45 degree street elbows.  On the drive home I talked to Mike (W8HX) on the South Lyon 2m repeater.  We discussed getting me back up our tower sometime in the next 9 days if my work on the bus progressed to the point where I could afford the time.  We went to bed early enough to watch a few TV programs and then fell asleep.

 

2015/09/20 (N) On To CCO

Leave a reply

I woke up at 7:30 AM but lay in bed until almost 8 AM.  It got down to 50 degrees F outside last night and was cool enough in the bus for really good sleeping under several layers of sheets and thin blankets.  Linda was still sound asleep so I slipped into my sweats and walked over to the meeting room for coffee and conversation.  I skipped breakfast as I prefer not to eat before I have to drive the bus for any length of time.  I would normally skip the coffee too but we did not plan to leave until noon, so I figured I had time to process it.

Linda eventually got up, got dressed, and joined the other women in the kitchen for conversation.  Tim Olsen and Karl Crigger had not seen our remodeling project yet so we headed to the bus.  Tim was particularly interested in what we had done in terms of furniture and we had a nice chat.  All around us the other rally participants were in various stages of preparing for departure and both Tim and Karl took their leave to attend to their own departure routines.

Linda managed to get other people to take various pieces of chapter-owned food-related equipment and supplies with them so we did have to take them home, store them, and possibly have to get them to someone later.  She started preparing the inside of our coach for departure while I installed the hitch back into the receiver on the bus.  Most of the rally attendees had left by 11AM or were getting ready to pull out so we decided we would go too.

I fired up the bus engine and then disconnected and stowed the shore power cord while the engine warmed up and the chassis aired up.  The site directly behind us on the other side of the road was empty, and it would be a much easier departure from there than from our site, so I backed the coach up while Linda served as spotter.  Kathy came over so Linda showed her our interior remodeling project while I pulled the car around behind the bus and connected it to the hitch.  Linda caught up with me and helped finish preparing the car for towing while I opened the air valve for the auxiliary brake system on the car.  She checked that all of the bays were closed and locked, said “so long” to several folks, and got on board.

We were ready to pull out when Dan stopped by to say “thanks” for a great rally and then Mike stopped by to wish us safe travels.  There are quite a few people in GLCC that we have never met, but most of the ones we have crossed paths with are genuinely nice people.  Many of us in the GLCC chapter are also members of an independent organization named Converted Coach Owners, AKA “CCO.”  Linda and I joined CCO in August 2014 but have never made it to a rally.  The annual Halloween Rally will be in Centreville, MI the weekend of October 17th.  Our bus should be usable then and we are seriously considering trying to attend.

I pulled the tag axle up and pulled out at 11:30 AM, driving around the back side of the activities building to get to the exit.  This route is open with easy, wide turns.  The more direct route has narrow roads with sharp turns, large trees close to the road, and low branches; not a big rig friendly route.  A lot of large motorhomes and 5th Wheel trailers use Elkhart Campground and I do not understand why the trees along this route are not trimmed up adequately.  We have encountered the same thing, however, at other RV parks.  I get the feeling that many people who own/operate RV parks have never owned/used an RV or at least never driven a large one through their own campground.

We discussed several different route options that might avoid construction delays but ended up taking CR-4 back west to SR-19 north into Michigan and picked up US-12 east.  The road construction between Sturgis and White Pigeon that delayed me for 20 minutes on Tuesday was finished and we rolled right through that stretch.  We stayed on US-12 to Coldwater, got onto I-69 north, and took it to the southeast corner of Lansing where we exited onto I-96 east.  We encountered our only road construction backup approaching the US-127 interchange at the southeast corner of the Lansing area.  We were through that soon enough and on our final stretch home.  We left I-96 at exit 133 and headed east on M-59.  The last few miles were the worst.  Hacker Road is as bad at the moment as we have ever seen it, more pothole than road, with deep, frequent ones at that, but we took it slow and made it home without breaking anything (as far as I know).

Linda made big salads for dinner which we enjoyed with a glass of Moscato.  She relaxed playing online games while I set up my computer and then checked into the SLAARC information net.  We watched the repeat of the last episode of Sherlock from last season and then went to bed.

 

2015/09/19 (S) Rally Wrap Up

Leave a reply

Today was the last full day of the FMCA Great Lakes Converted Coaches (GLCC) annual Surplus and Salvage Rally.  It started with strong storms overnight but they had dissipated by breakfast time.  The skies eventually cleared on brisk winds with a chilly northerly component and the high was forecasted to be 67 with some clouds.  The clouds turned out to be white, scattered, and fast moving and it turned out to be a lovely late summer day with a hint of fall in the air.

The breakfast provided as part of the rally was pancakes and sausage but Linda and I had our granola and finished up the berries.  We decided to stay around the campground and have an easy day.  Initially, however, we had some post-breakfast excitement.

Juniper caught another mouse.  It was another very small dark gray house mouse, obviously very young but old enough to wander away from a nest in search of food and water.  I got it away from her and into the paper cup that we kept for this purpose and put the paper bowl on top.  Linda took it back to the woods and set it free.

Even after catching two mice in the last 16 hours the cats continued to show great interest in the base of the bathroom sink cabinet.  The front of the toe kick space has one of the many brass colored expanded metal screens for the OTR HVAC ducts and several things were becoming clear to me at this point.  1) We had a nest somewhere in the bus; 2) the nest was likely in the base of this cabinet, or accessible from there, and 3) the baby mice were apparently small enough to get through the expanded metal grate.  I also suspected that something had happened to the mother mouse which is why the babies were leaving the nest.

Some of this was confirmed when I got down on the bathroom floor with a flashlight and was looking through the grate when a small mouse came out of the 4″ flexible duct.  I tapped on the grate and got it to turn around and go back.  I measured the rectangular opening.  Linda cut a piece of cardboard about 1″ larger in width and length and I taped it over the opening.

We were away from the coach visiting with Scott Crosby of http://BusGreaseMonkey.com and others before Scott left for home.  Scott and Tami Bruner came over too, followed by their friends/neighbors Misty and Gary who brought their GM3751 Silversides to the rally.  When we returned to our motorcoach it was immediately obvious that Juniper had caught, or at least cornered, something, probably another mouse.  Her posture and vocalizations are distinctive in the presence of prey.  What was odd was she was by the front of the new built-in sofa rather than in the bathroom.

I shushed her away and she left the area without much protest.  I did not see a mouse and walked to the bathroom to make sure our cardboard cover was still in place.  It was, so if there was another mouse it must have gotten into the living area of the bus through some other opening, perhaps the OTR HVAC air return under the sofa.  When I returned to the living room the mouse was climbing up onto the top edge of my slippers.  I did not see exactly where it came from but it could have been inside one of them to escape the cats.  I got the paper cup and bowl and caught it fairly easily.

I put on my Crocs, which we use as easy on/off camp shoes, walked back to the woods at the southern boundary of the campground, and set the mouse free.  It scampered under some leaves but its odds of survival were probably as small as it was.  The temperature was forecast to drop into the upper 40’s tonight and I heard a Great Horned Owl off in the distance.  Still, its survival odds in the bus were probably worse.  We had live trapped an adult house mouse under the kitchen sink when the bus was still at home, but that was a couple of weeks ago so there is no way it could have been the mother of these current juvenile mice unless it found its way back into the bus.  My assumption was that the mother was not around and the young mice were desperately trying to find food and water.  These circumstances made me a bit sad, but we simply cannot have mice getting into the living area and becoming play toys for our cats.  Ultimately we need to find a way to keep them out of the bus altogether but so far a solution to that problem has proven to be elusive.

The official rally lunch was leftovers after which folks divided up whatever was left.  Linda split the remaining salad lettuce with Vickie and took some bell peppers, onions, mushrooms, and bottled water.  I grabbed a mostly full 2 L bottle of diet Coke.

Marty Caverly stopped by to see the bus remodeling and stayed to chat a while.  Marty had spent the better part of a day at the Back-to-the-Bricks Rally last month getting Pat and Vickie’s cruise control to finally work reliably.  He spent most of this morning getting their air leveling system to work reliably.  Marty is an electrician who did a lot of work with electronics in his 40 years with General Motors and is the “go to” guy in our club for most electrical issues.

There was a lull in our social activities and Linda settled in to read while I worked at my computer transferring drafts of blog posts from e-mail to Word.  I edited a week’s worth from the third week of July and got them ready to upload but did not post them.  I will do that when we get home.  I used the MCD day shade while sitting at the desk to cut down the light while still affording me a view.  Linda forgot her iPad and was using mine to read one of the latest novels in Nick Russell’s Big Lake series.  She went for a walk which gave me an opportunity to work on this post as I write them using the Note app on my iPad.

We saw Pat and Vickie walking towards the office and figured they were making arrangements for next year’s Surplus and Salvage Rally.  They stopped at our coach on the way back with the signed contract.  The dates are September 21 to 25, 2016 and the nightly camping rate is $35 plus tax for 50A full hookup sites.  It’s pricey, but the campground is conveniently located in the heart of the Elkhart area with convenient access to many RV surplus businesses.  We also get the exclusive use of a meeting room with a full kitchen, and they always reserve sites for us that are close to the meeting room.  It should be a lovely time of year to have the rally, being the first five days of fall.  Unfortunately we will probably not be attending as we do not plan to be back from New England by then.

Meals for this rally usually include dinner on Wednesday, Thursday, and Friday, with Friday also being a business meeting, and breakfast on Thursday, Friday, Saturday, and Sunday.  The only lunch is the “must goes” on Saturday.  Saturday dinner is traditionally out at a restaurant and the choice this year was McCarthy’s on the Riverwalk.  The Elkhart River splits as it comes into the city, joins back up with itself and eventually flows into the much larger St. Joseph River at two points.  McCarthy’s features some very interesting Irish fare but the ambiance is slightly upscale restaurant rather than an Irish pub feel.  Our food choices were very limited, of course, but we knew that before signed up to go.

We rode over with Pat and Vickie and sat with them at one end of the table.  I think we had 13 of the 23 attendees at dinner.  Linda had a Guinness and I had a lighter beer that had “cider” in the name.  We each had a house salad with a very nice balsamic vinegar dressing but no cheese and an order of French fries.  The service was OK but not outstanding.  I asked for Tabasco sauce and Vickie had to remind the waitress to get it.  I was over half done with my fries by the time it arrived.  The serving was small but the fries were good and we did not leave hungry.

Most of us went for a walk along the river after dinner.  The sun was already below the downtown skyline, however, and it was chilly.  None of us brought jackets so it was a shorter walk than it might otherwise have been.

Back at the campground Scott and Tami started a campfire in the fire pit by their rig.  Linda and I brought over our chairs, blankets, a bowl of grapes, and our glasses of wine.  Vickie brought her chair, popcorn, and a popcorn skillet designed for popping corn over an open fire.  Dan brought his chair and joined us.  It was a clear, crisp evening but the fire (and blankets) made it comfortable, the popcorn and grapes made it yummy, and company made it worthwhile.

Although relaxing in some ways, rallies are intense in other ways.  We have only been here 3-1/2 days but we arrived tired, ran around taking care of things, and when we finally relaxed the tiredness washed over us.  We gathered up our things and went back to the coach at 10 PM where we watched an episode of Grantchester on the local PBS affiliate, went to bed, and fell asleep.

 

2015/09/17 (R) Counter This

Leave a reply

I went to breakfast before Linda as she was still asleep.  I wanted coffee but it wasn’t ready so I toasted a blueberry bagel and ate that.  Eventually the coffee was ready and I had some.  Linda showed up a little while later with our granola and fruit and most of the rally attendees arrived and had breakfast.  I got a call from Josh regarding the Corian desktop.  He indicated that Ferman Miller of Countertops Plus in Shipshewana had a piece of Sandstone Corian big enough to make our desk top and was expecting us to call or visit.

After breakfast we gave Vickie a tour of the bus and visited for a while.  We then drove to Countertops Plus, located east of downtown Shipshewana, and met with Ferman Miller.  He had a piece of 1/2″ Sandstone Corian that was a perfect match to our existing counters.  It was 96″ long by 30″ wide.  He needed a 72-3/4″ by 25-3/4″ piece for the desktop plus a 72-3/4” by 1″ piece and a 25-1/4″ by 1″ piece for the front and left edge returns.  It looked like he might have enough Corian left to make our dining room table so I made a quick sketch but left off the length and width dimensions.  We ordered the desktop and the table.  He figured out the price and we gave him a deposit.  I need to determine the length and width of the table and call him in the morning with those dimensions.

We set the GPS for Jarel Beatty Cabinetry and headed for Logansport.  I called Jarel to let him know we were on our way and verify that it was still OK to come.  We drove through the pleasant Amish/Mennonite countryside on small count roads we had not previously traversed and passed a school where the children were playing softball dressed in their plain, traditional clothing.  It was an odd yet delightful sight.  Once we were on US-20 we were on familiar roads.  We stopped along US-20 for fuel and a break and bought some peanuts and water.  We arrived at Jarel’s place at 2:11 PM.

We brought a 60″ long piece of 1/4″ walnut veneer plywood and had Jarel rip two pieces 4-3/4″ wide.  He actually cut them slightly wider and then trimmed off a small edge to get the long edges clean and square.  We loaded the half sheet (96″ by 24″) of 3/4″ walnut veneered plywood in the car and then loaded the half box cover for the forward passenger side OTR HVAC duct.  There were other pieces of plywood and hardwood left so we loaded all of those as well.  We only realized after we left that we forgot to get the drawings back from Jarel.  I sent him a TXT message and asked him to hang on to them until I could get them from him and he agreed to do that.

We stopped at the Martin’s supermarket about a mile from Elkhart Campground and made salads for dinner at their excellent salad bar.  It was 5:30 PM by the time we got back to the campground.  Dinner was nominally at 6 PM but was ready to eat closer to 6:30.  Linda reheated seitan stroganoff (vegan, of course) for our main course.

After dinner we gave Charles and Connie Martin the tour of our interior remodeling project and chatted for a while.  There were thunderstorms in the overnight forecast so I rolled up the two driver side awnings.  We then joined Scott and Tami Bruner at the fire pit by their bus.  I took a couple of folding chairs over and Linda brought our glasses of Franzia Moscato.  Charles joined us and so did Dan.  Tami had interviewed for a new job this morning, gotten the offer, and accepted the position, so it was a big day for her.  She and Scott have also been successful finding things they need for their bus conversion projects (they own two buses) so it has been a very good week for them.

Tami was tired and headed off to bed and Linda had the same idea a short while later.  There was a fairly high probability of rain starting at 2 AM with but we got occasional drops starting at 10 PM.  By midnight we were all getting tired and the raindrops were becoming frequent enough that they gave us an excuse to call it a night as we needed to put our lawn chairs away so they did not get soaking wet.  I wrote for a while in bed but I was too tired to work efficiently and went to sleep around 1 AM.

 

2015/09/16 (W) CSD to GLCC

Leave a reply

I spent the night in the coach at Coach Supply Direct, in the fenced in parking lot, next to the train tracks that run parallel to M-62 through Edwardsburg, Michigan.  I was up late and went to bed tired.  The trains did not bother me (they run at every hour of the day and night) but aching knees and joints in my hands, especially the base of my thumbs, made for a less than sound sleep.  I had also not leveled the coach when I arrived yesterday but it was slightly low to the front passenger side so it did not bother me as me head was higher than my feet, the head of the bed being on the driver’s side of the bedroom.

I had granola for breakfast, checked my e-mail, and was just settling in to start today’s post using my iPad when Josh showed up at 7:30 AM.  He opened the building and retrieved a small desk/cabinet and loaded it into his car to take back to the cabinet maker.  A portion of the back needed to be finished as it will be exposed when installed.  Having just been through the process of designing built-in RV furniture and interacting with a cabinet maker I understood how a detail like this could easily be missed.  We were fortunate in our choice of Jarel Beatty, as recommended by our friend Butch Williams, to build our pieces.  Jarel’s meticulous attention to the details of how something would be constructed, installed, viewed, and used, resulted in our not having any post-construction issues.

After Josh left I checked the status of the house batteries.  They were at 81% SOC (State Of Charge). Not bad after 11 hours of use.  Extrapolating, it appears that given some reasonable energy management we could go 24 hours without recharging before hitting the 50% SOC level.  I did not, for instance, use the microwave oven.  That is much better than before we replaced the refrigerator so it appears that the new one is clearly more energy efficient than the old one.

I also checked the coolant levels in the Aqua-Hot and generator expansion tanks.  The Aqua-Hot tank was still above max cold but the unit was also still a bit warm to the touch.  The level in the generator tank yesterday was very low with the engine fully warmed up and operating under load so I added antifreeze up to the “hot” mark.  If was slightly above that level this morning although I expected it to be lower as the system cooled off and drew the coolant back in.

Tyler showed up at 8:15 AM and knocked on the door.  He had stopped at McDonald’s and bought me a large coffee, half regular half decaf.  He had asked about this before leaving yesterday and remembered it this morning.  I was impressed with both his memory and thoughtfulness.  He got right to work on the cockpit seats, starting with the driver’s seat.  Before installing it, however, I had him repair the swivel plate.

That plate has always wobbled which was an uncomfortable and annoying sensation while driving.  Now that I had a clear view of the top of the plate it was “obvious” that there was once a washer under the retaining nut but it was no longer there.  Tyler removed the retaining nut, found a large washer with the correct hole size, put it on the threaded shaft, replaced the retaining nut, and tightened it.  No more wobble.

I am always trying to deconstruct the details of how this coach was built or serviced.  My best guess is that old seat was removed when CMI installed the tile floor in the cockpit area right after we bought the bus.  The installer probably removed the seat from the swivel plate in order to have better access to the pedestal and the area around it to lay the tile and either did not replace the washer or failed to recognize that it was missing and needed to be replaced.  I will never know for sure, but that’s my best guess.

Tyler bolts the new Flexsteel driver’s seat to the existing pedestal swivel base. There is not a lot of room to work around the base of this seat.

Tyler bolts the new Flexsteel driver’s seat to the existing pedestal swivel base. There is not a lot of room to work around the base of this seat.

I connected the chassis batteries so Tyler could connect the 12V DC power to the seat and reposition it.  The outside rear mounting bolt was particularly difficult to reach but with the power on he was able to slide the seat forward and swivel the front to the left creating better access to the left rear.  Once it was bolted down he had me sit in it and make sure all of the adjustments worked.  They did!  The seat is comfortable, fits better in the available space, and has a range of adjustment that should allow either of us to position it comfortably.  It is still a little tight on the left side, but not like the old chair, and the only control there is a manual level for adjusting the back tilt that I can reach it without difficulty and generally do not change once I have it adjusted.

When Josh returned at 10 AM with the parts for the living room slider bases he and Tyler got busy prepping them.  Linda texted me around 10:20 for a status update and I suggested that she not leave before 1 PM.  There was more custom work required to get the chairs assembled and mounted than I thought there would be, but as I was able to watch every step of the process, and talk to Josh and Tyler as they worked, I could clearly see what the problems were and what they were doing to solve them.  They were on task and focused on getting it done correctly.

One of the new Flexsteel 529 captain’ chairs with the new swivel/slide pedestal base attached. Note the handle for the swivel release.

One of the new Flexsteel 529 captain’ chairs with the new swivel/slide pedestal base attached. Note the handle for the swivel release.

The problem this morning was getting the swivel release cables on the cockpit seats to stay in place when the swivel tang was released from the detent in the base.  The reason for the problem is that we are reusing the old swivel bases because they have base plates that match the mounting bolt locations in the floor.  The way the swivel release cable is retained on these bases, however, is different from the attachments on the ends of the new cables.  Tyler was able to figure out a solution but it took a little time.  I don’t mind paying for that kind of experience and problem-solving.

I texted Jarel to give him a status update and indicated that we could come down Thursday, Friday, or Saturday to pick stuff up.  He texted back that any of those days would work.  I checked the Magnum remote and the SOC status had gone back to “Think’n”.  Nuts.  This has happened before with the Battery Monitor Kit and I think it has to do with the 4-pin connector that plugs into the bottom of it.  Whatever the case I need to investigate and fix it if I can.

The two class C captain’s chairs installed on the passenger side of the living room.

The two class C captain’s chairs installed on the passenger side of the living room.

With the driver’s seat installed I sat and tested its various adjustments and found a position that I liked.  Next came the two class C captain’s chairs for the passenger side of the living room.  Tyler and I worked for quite a while using a base with no chair on it to determine the correct location for the bases.  The seats needed to be far enough from the passenger side wall, the desk, and the co-pilot seat to swivel without interference but no farther as we did not want them to encroach into the center isle one inch more than necessary.  We also ran them through their full range of slide and swivel motions to make sure we could pull them up to the table.

We ended up with the edge of the front seat 16″ from the front edge of the main floor and 16″ from the HVAC duct.  We checked it for square and marked the holes.  Tyler drilled pilot holes using nuts to limit the depth.  We set the chair in position and secured it with four lag screws.  We measured 36.5″ to the front edge of the second base and positioned the base 16″ from the HVAC duct.  We made sure it looked right and then Tyler marked the hole locations and we removed the temporary base.  He drilled the pilot holes, we set the chair in place, and lag screwed them into floor.

The new navigator (L) and pilot (R) seats installed in the cockpit. The navigator seat has a powered footrest. We reused the old 6-way power bases for both seats.

The new navigator (L) and pilot (R) seats installed in the cockpit. The navigator seat has a powered footrest. We reused the old 6-way power bases for both seats.

With the captain’s chairs installed in the living room Tyler installed the co-pilot seat.  Once that was done the job was finished except for the cleanup and paperwork.  Josh and I chatted some more about the Corian desk top.  He had inquiries out to three suppliers but was having trouble getting replies from them.  We needed a temporary desk surface, so Tyler cleaned off the 4’x8′ piece of 1/2″ plywood that had served as the workbench for integrating the seating components. He marked and cut a 72″ long x 24.5″ deep piece.  I notched the center of the back edge 18″ wide by 3″ deep.  Tyler and I installed it while Josh totaled up the bill.  I wrote him a check for the balance due, prepared the coach for departure, and left a little after 2 PM.

I could have titled this post “Edwardsburg to Elkhart” but I like to keep my titles short.  The trip from Coach Supply Direct in Edwardsburg, Michigan to Elkhart Campground in Elkhart, Indiana was a short trip of approximately 15 miles that took about 25 minutes.  Upon arrival I parked the coach to the side of the entrance road and went in to the office to register.

We have been to this campground many times before but I managed to miss the turn for the row with our assigned site so I had to go all the way around a second time.  Once I had the bus in the site I leveled it and then shut it down.  I texted Linda our site number and then chatted with other GLCC chapter members who were already there and parked.

While I helped set up tables in the meeting room Linda arrived and got the cats, litter tray, etc. on board our coach.  After settling in for a few minutes I called Terry at A-1 Upholstery.  She was there so we drove over to pick up the sofa cushions, wrote her a check for the balance, and drove back to camp.  We were unloading the cushions when Dan stopped by.  He had retired at the end of July and bought a converted GM4104 a couple of weeks later.  His wife Kathy and son James had made the trip up from Huntsville, Alabama just for this rally.  They planned to join FMCA and GLCC but wanted to check us out first.

Linda had cleared the sofa earlier and put stuff away under the bed.  By the time I came in she had the new sofa cushions in place.  They were a tight fit but they looked nice.  We might make a small adjustment to the depth of the plywood seat but I think they are going to work out OK.

Linda went to the meeting room to help prep dinner and heat our vegan chili.  I took a short nap and joined her at 6 PM to eat.  We went back to the coach and gave Ed Roelle the tour and chatted for a while.  We then went back to the club house, met up with Vickie, and went for a walk.  When we got back to our coach I opened the box of Franzia Moscato and poured two glasses of wine.  We took two lawn chairs over to Scott and Tami’s bus to sit and chat.  Scott Crosby of www.busgreasemonkey.com was also there.  He arrived after I did in his 1948 GM 3751 “Silverside” bus.  It eventually got chilly so we went inside and went to bed where I worked on blog posts for a while on my iPad.

 

2015/08/12 (W) Back to Indiana (Again)

Leave a reply

Today was early arrival day for the annual Back-to-the-Bricks converted bus rally in Clio, Michigan.  This joint rally of the Converted Coach Owners (CCO) and the FMCA Great Lakes Converted Coaches (GLCC) chapter has become an annual event that typically draws 20 to 30 rigs.  Most of them are converted highway buses and many of those were converted or re-modeled by the owners.  Many of them are works in progress but such is the nature of the bus conversion hobby and the true bus nut.  But that is not where we were headed today.  Our bus is unusable at the moment as the toilet is disconnected, the bed platform has been removed, and all of the cabinet drawers have been taken out.  But the main reason was that we had multiple commitments in Indiana today.

Our first appointment was with Josh Leach of Coach Supply Direct.  Although CSD is located in Edwardsburg, Michigan we had arranged to meet him in the parking lot of the Martin’s Supermarket at SR-19 (IN) and CR-4 on the north side of Elkhart, Indiana at 9:30 AM to take delivery of 15 yards of upholstery fabric.  We picked that location, rather than his shop in Edwardsburg, for several reasons.  He had to be at the Forest River Owners Group (FROG) rally at the Elkhart County 4-H Fairgrounds at 10 AM so that location got him half way to his destination at a good time of day.  For us, Elkhart is a 3-1/2 hour drive.  That meant we had to be up at 5:00 AM and on the road not later than 5:45 AM to be there on time, allowing for coffee, fuel, and bathroom stops.  Had we met him at his shop we would have had to be there by 9 AM requiring us to get up even earlier.  You have to draw a line somewhere.

I took the wheel for the start of the trip.  It was still dark but the faint glow of the impending sunrise was visible as we pulled out onto Hacker Road facing a rising crescent moon.  At M-59 we headed west to I-96.  I reset one of the trip odometers before we left and verified that it was 13 miles from our driveway to the end of the entrance ramp from M-59 onto I-96W.  We skirted the southern edge of Lansing on I-96 and took Lansing Road to I-69 south.

Nineteen miles south of Lansing, and about an hour into our trip, we stopped at the Biggby’s Coffee in Charlotte for coffee and bagels.  Biggby’s is not my favorite coffee but this particular store is in just the right location.  Linda checked the M-DOT website and it appeared that the bridge work on M-60 in Mendon was completed, so we exited I-69S and headed west on M-60.  Unfortunately the bridge was still closed so we had to follow the detour to the south toward Sturgis.  Unlike our previous trip in early July, when we continued on to Sturgis, we followed the complete detour through Nottawa and Centreville and back to M-60 in Three Rivers.  We had never driven through Nottawa or Centreville before so that provided some new scenery for the trip.

As we have done many times before we continued our trip on M-60 as far as Jones where we stopped at the Shell station for fuel.  We then took M-40 south to US-12.  This seven mile stretch of M-40 traverses steeply rolling hills and is both beautiful and fun to drive.  We took US-12, running west just north of the Michigan-Indiana border, and eventually exited onto Old 205 (M-205?) which turns 90 degrees to the left a mile later and drops straight south into Indiana where it becomes SR-19.  A few miles later we arrived at the Martin’s Supermarket at CR-4 just after 9 AM.

Josh was not there yet so we went inside to use the restrooms and get some coffee.  This particular Martin’s has a nice salad bar with a beverage station, a Starbucks Coffee outlet, and a seating area with Wi-Fi.  Josh showed up right on time and parked next to us.  I met him outside and we transferred the roll of upholstery fabric from his car to ours and then went inside to visit for a few minutes before he had to leave for Goshen.

When we left Linda took over the driving.  Our next planned stop was A1-Upholstery in Elkhart to order the cushions for our built-in sofa.  Continuing south on SR-19 we stopped at Factory RV Surplus to look for battery cable end covers but the ones they had were too expensive.  I think they now sell more retail-packaged merchandise than they do true surplus material, and even less salvaged parts.

Lou (mom) and Terry (daughter) own and operate A-1 Upholstery and were recommended to us by Josh.  We discussed the project with Terry, who I had previously spoken to on the phone.  We reviewed my dimensioned scale drawings, which were on one sheet of 11″x17″ 1/4″ grid-square paper, and agreed on how the cushions would be made.  Terry thought she would have them done by the end of the month but noted on the order form that we needed them by September 14th.  We noticed that she had a lot of sample books from which we could have selected a fabric but we like the Lambright Notion Linen, and Terry thought it was a very good fabric that should look good and wear well in our application.  We left the fabric and drawing with her and wrote a check for the deposit.

All of our stops were important today, but our primary reason for the trip was to pick up the pieces of the custom desk and built-in sofa for our bus from Jarel Beatty Cabinetry in Logansport, Indiana.  We continued our trip south on SR-19 to US-20, took that west to US-31, and went south, exiting at Rochester onto IN-25 for the final 22 miles to Logansport.  This is a route I have driven many times but Linda had the wheel this time so I provided some occasional guidance.  I called Jarel to let him know we were making better time than we had anticipated and would be there between noon and 12:25 PM.  I then called Butch to give him a status update.

This was the first time Linda and Jarel had met and so it was also the first time Linda had met Mya, Jarel and Georgette’s sweet little dog.  Mya came up to me, sat, stared up at me like we were long lost friends, and waited patiently for me to give her the attention she was seeking.  I was happy to oblige.

Jarel Beatty Cabinetry, Logansport, IN

Jarel Beatty Cabinetry, Logansport, IN.  Panorama taken from the entrance door.

Jarel Beatty Cabinetry, Logansport, IN.

Jarel Beatty Cabinetry, Logansport, IN.  Panorama from the center of the shop.  Entrance door is far left.

As I have previously described in this blog, the desk consists of nine pieces (if you count the four drawers as separate parts):  two pedestals with separate bases, a cover that goes between them, and four drawers.  The left pedestal has a fold up work surface with two support wings, and a fold down fake drawer front, so technically those are four more pieces, but they are attached to the pedestal with hinges so I am not counting them as separate parts.  The bottoms of each pedestal have been cut out to provide access to the fan-coil heat exchangers that will be installed in the bases, so those are really two separate pieces now, put I am not counting them as such.  I am also ignoring screws, drawer slides, blocking, and other assembly items in my parts count as they are all “installed components.”  With the drawers installed we only had five major pieces to load plus the two access plates.  Jarel also had the pieces ready for the built-in sofa so we loaded those as well.  I took pictures of his shop and the pull-out pantry, which was mostly assembled but not quite finished.

The installed desk will have more pieces than just described but these are the pieces that Jarel made.  The finished desk will have five grills that we have to cut and install, at least four drawer pulls that we have to install, a plywood top that will span the two pedestals and leg space, and a Sandstone Corian countertop that will go on top of the plywood.  While not actually part of the desk there will also be a large cover for the passenger-side living room HVAC duct and wiring chase and a small hose cover at the desk end both of which align with the left end of the desk and will look like they are part of it.  Jarel will make the chase cover later after the desk is installed and we can get a final, accurate measurement for its length.

As long as we were in the neighborhood we naturally stopped to visit with our friends, Butch and Fonda, in Twelve Mile, Indiana.  While we were at their house we loaded a dozen 4-foot army surplus fiberglass mast sections in the car.  Butch had bought these at a swap for me some time ago.  We will use them for ham radio antenna projects.  Butch gave me his old, non-functioning, Vanner battery equalizer to see if I can figure out how it does what it does.  He also lent me his air-powered brad nailer which can also drive 1/4″ crown staples and gave me a box of 5,000 staples to go with it.  Fonda found a scrap piece of resilient underlayment designed for free-floating wood floors.  Butch though it might work well under the 1/4″ plywood underlayment to fill in the gaps and irregularities so we took it with us.

When we were done loading stuff into our car we went to see their new property on SR-25.  They have already had a new roof put on the barn and new doors put in the house.  They have bought themselves a BIG project, but it will be a much more appropriate and manageable place for them going forward than the building complex in Twelve Mile that has housed their business operations for the last 20 years.  It’s an old GM dealership from the 1940s and they have approximately 11,000 feet under roof including a 2-bay service garage with a functioning in-ground lift.

We drove to Rochester and had dinner at Pizza Hut.  Linda and I split a medium specialty veggie pizza and had the salad bar with it.  We might have had a few more restaurant choices in Logansport, but Rochester was 22 miles closer to home.  With the 19 hours we were gone today, and over 525 miles we had to travel, 22 miles and 30 minutes was significant for us.

We got back on the road at 6:30 PM with Linda at the wheel and headed back up US-31N to US-20 and headed east.  We decided to stay on US-20 all the way to I-69, stopping in Lagrange to use the restroom at the Marathon complex.  We stopped again at the Shell station on M-60 in Michigan for fuel.  It was getting dark and I had been able to rest while Linda drove, so I took over the driving duties.  From this point on we were just reversing our route from this morning.  We got home at 10:30 PM, unloaded everything from the car, and then went straight to bed.

 

2015/06/02 (T) GLAMARAMA 2015 (Day 0)

Leave a reply

We were up at 7 AM and had cinnamon toast for breakfast but did not have coffee.  We checked various routes to the Elkhart County 4-H Fairgrounds (EC4HFG) and searched online for information about any possible road construction problem areas but did not find anything that looked problematic.  By 8 AM we had started preparing the bus and car for travel.  Linda walked over to Curtis’s coach to say “so long for now” but all the shades were down so she sent him a text message that we were on our way.  We pulled out of our site at 8:15 AM.  I pulled up clear of other RVs and stopped to wipe off the passenger side mirror which was obscured with dew.  I am always surprised that I don’t notice things like that before we start to move.

We took CR-4 west to SR-19 and went south, crossing over the Indiana Toll Road, to CR-6.  There are times of the day that this intersection would be very busy but traffic was light this morning and I had no trouble getting into the correct turn lane and completing the turn.  CR-6 is a 4-lane road and moved along nicely all the way to CR-17 except for a short lane closure for local maintenance.  We turned south on CR-17, took it down to US-20, and headed east.  As I expected, this stretch of US-20 was still very much under construction with only one lane open in each direction and no wide loads over 11 feet permitted.  Traffic was more congested and slower but it moved along.  When we got to SR-15 we turned south and ran along nicely until we got to a construction zone that had the road down to one lane with flaggers.  We waited patiently and eventually got through the bottleneck.  We were routed through a short detour and then finally entered Goshen.  We followed the SR-15/US-33 Truck Route and found ourselves in another one lane construction zone with flaggers, and a train thrown in for good measure, but we eventually made it to our turn onto eastbound CR-34 (Monroe Street) and drove the final mile to Gate 5 of the EC4HFG.

We were directed to the staging area where we unhooked our car.  We were then led to the area reserved for our Great Lakes Converted Coaches Chapter and backed into our site.  The Laughing Raven Touring Co. bus was already parked in our area.  We saw this bus at Elkhart Campground while walking but did not realize it was headed to the rally.  The owner, Mark Lovegreen, is not a member of our chapter but wanted to park with other buses and we were glad to have him.  I reserved 12 parking spaces, the parking crew gave us 13, and I had a least one coach that was not going to show up so we had the space.  Also, Pat and Vicki Lintner got parked on hard surface nearby as the ground in our area was very soft when they arrived on Sunday.  In addition to being our chapters National Director Pat is the Senior VP of GLAMA would normally be parked elsewhere except that he likes to park with the chapter.

While Linda set up the interior and made coffee I hooked up the electrical power.  Our main 50 A circuit breaker did not want to set.  I finally pushed the lever hard enough to move it but did not like the way it sounded and did not get power to the coach.  I have indicator lights that told me there was power at the coach end of the shorepower cord but I verified that using my VOM.  I removed the cover from the disconnect box in our coach and verified that there was voltage present on both the L1and L2 bus but no voltage present on the output lugs of the circuit breaker.  Bummer.

Linda turned off the 30A supply circuit breaker and unplugged the cord.  I checked with the VOM that there was not voltage present and then unclamped the L1 and L2 load wires, removed them from the circuit breaker, and then removed the breaker from the box.  I tested it for continuity and with the lever in the “ON” position and one leg showed a short but the other leg showed an open.  That meant I should have had voltage coming through to our Progressive Industries EMS on one leg but I never did.  Regardless, we needed a new breaker as at least the one side had clearly failed.

The circuit breaker was a Square D QO style 2-pole 50A model.  I knew that Lowe’s carried QO breakers so Linda searched for the nearest store using her phone.  There was one on US-33 back towards Elkhart so Linda fixed a “to go” cup of coffee for me and I headed there.  They had a good selection of QO breakers including the 50A one that needed.  I looked briefly at refrigerators and noted that they had the Frigidaire model we are considering in white, black, and stainless steel.  Maybe we will drive up later to look at them.

I took a different route through Goshen to avoid the one lane construction zone.  Back at the coach I refilled my coffee and got to work.  As bus repairs go this one was pretty straightforward.  Getting the two load wires into the circuit breaker clamps was a bit tricky but I got them in.  The QO breakers snap onto a mounting rail at the bottom and then the contact fingers snap over two blades at the top.  All of that took a bit of pushing but I got it in.  I put the cover plate back on, reconnected the shorepower cord, turned on the supply breaker, and turned on the coach breaker.  We had power to the coach but it shut off.  I reset the breakers (turned them full off and then back on) and everything appeared to be fine and the power did not trip out after that.

With our power problem averted Linda walked over and got us registered and signed up for one of the few remaining time slots to work in the rally office.  She had volunteered to work registration but most of the time slots were already filled and the only thing left was Saturday morning.  Shortly after she returned to our parking area three more buses showed up:  Bill and Karen Gerrie, Mike and Kathy Dickson, and Joe and Mia Temples.  Next in were John and Paulette Lingafelter followed by Don and Sandra Moyer.  Late in the afternoon Scott and Tami Bruner arrived.  That only left a couple of coaches arriving tomorrow.

I borrowed a sledge hammer from Joe Temples and pounded three pieces of rebar into the ground to serve as supports for the clubs three flag holders.  A number of RVs around the rally site had the same design and I suspect that there was an article in the magazine, or something online, about how to build these.  They are very simple and inexpensive, can be taken apart for transporting, and rotate with changes in wind direction.  Our club as a USA flag, a Canadian flag, and a Chapter flag.

We all stood around in small, shifting groups talking about this and that.  I laid down around 2 PM and napped for about 90 minutes.  We are conveniently located to one of the bathroom/shower facilities so Linda took a shower there so as to not use up the good water in our tank.  By 6 PM most of our group had left to go out to dinner.  We ate around 6:30 PM, having a nice, light supper of cold chickpea salad on a bed of power greens.

A little before 7 PM we drove back to Lowe’s to look at refrigerators.  It turned out that the ones I saw were the 18 cu. ft. models not the 16 cu. ft. one we need/want.  The 18 cu. ft. model would fit in our alcove but take up the entire width leaving no space for a pull out pantry.  We looked at solar powered spotlights for illuminating the flags at night but at $18 each decided not to buy any as we needed at least three and would ultimately need the approval of the club to buy them.  We stopped at the Martin’s market on US-33 and picked up a deli tray brochure and a few grocery items.

Back at the rig there were lots of folks gathered in conversation.  Linda and Vicki went for a walk while I chatted with Mark (from Alaska) and Scott.  Scott and Tami recently had a new Whirlpool residential refrigerator installed in their bus so I went to see it.  It’s a very nice French door fridge with lower freezer drawer but is too tall for our alcove.  This is the style refrigerator Linda wanted but we could not find one sized to fit our space.  Bill Gerrie helped me get the U.S. and Canadian flags off of the holders.  Linda and Vicki returned just in time to help fold them properly.  With darkness came much cooler temperatures and everyone retreated to the warmth and comfort of their coaches.

Someone reminded us that Paul’s Seating in Elkhart was a good place to shop for furniture so Linda Googled it and found the website.  There were pictures of lots of chairs, including a barrel chair, but no information about dimensions, fabric options, or prices.  We will likely go to Martin’s in the morning and place a food order and then drive in to Elkhart and find Paul’s.  The critical path for our interior remodeling project goes directly through the selection of furniture and then through the refrigerator replacement so we are starting to feel some pressure about getting decisions made and orders placed.

 

2015/05/31 (N) Age of Disco Camping

Leave a reply

We were up around 8 AM.  Linda took a shower after which I started the last load of laundry while she made coffee.  We had our usual granola breakfast.  When the washer finished I trimmed up my beard and shaved and then took my shower while Linda moved the wash to the clothes dryer.  Once we were both dressed we got very busy loading the bus and preparing it for travel.

I put on my work clothes and selected my clothes for the week.  Linda took care of loading the bus while I attended to preparing it for travel.  The preparations went something like this.  First I loaded our GLCC banner, flags, T-shirts, door prizes, tools, and our new 6 gallon pancake style Porter-Cable air compressor into our Honda Element.  I turned on our TireTraker TPMS monitor and plugged in the power cord for the TPMS repeater which is installed in the passenger-side rear corner cabinet in the bedroom.  I then got out our long fresh-water hose, connected it to the faucet on the front of the house, ran it under the bus, and connected it to the fresh water inlet.  I got a mat to put under the fresh water tank drain and emptied about 40 gallons of water that had been in the tank since we got home on Friday, April 24.  I closed the drain valve and then opened the fresh water tank fill valve.

At 3.4 gallons per minute the 120 gallon fresh water tank takes about a half hour to fill.  While that was happening I got our DeWalt 15 gallon upright tank air compressor out of the garage and rolled it over to the front of the bus (it has wheels).  I got our long extension cord out of the front bay and ran it from the front porch outlet to the air compressor.  I then got the air hose out of the bay where it was stored along with the air chuck, and digital tire pressure gauge, and retrieved a knee pad and slip pliers from two other bays.  I removed the TT TPMS sensor from each wheel in turn, checking and adjusting the pressure as I went.  I always do both dual drive tires on each side at the same time to make sure they are the same.

The inside duals have valve stem extensions so I use the pliers to keep them from loosening while I unscrew the sensor.  The two front tires were at 111.5 and 112.0 PSI, both above the minimum required 110.0 PSI, but I brought them up to 115.0 PSI.  I like to run the tires 5 PSI over the correct pressure to allow for changes in overnight low temperatures and to provide some margin against slow leaks.  The two tag axle tires were around 82.5 PSI so I reset them to 85.0 PSI.  The four drive tires were around 92.5 PSI so I brought them up to 95.0 PSI.

By the time I was done with the tires the fresh water tank was full so I shut off the water and stored everything back where it came from.  I then pulled the Element around behind the bus.  Everything was on board by this point except the cats, the cat tree, and us.  We hooked up the car for towing and checked all of the lights.  I switched on (connected) the chassis batteries, opened all of the air valves, switched off the Aqua-Hot engine preheat pump and diesel burner, started the main engine, and switched the suspension to drive mode.  While coach was airing up I pulled the 50 A shorepower cord and stowed it away.  Back in the house we put the cats in their carriers and left them in the front hallway while we took their “tree” out to the bus.  We then brought them out, locking the house behind us, and put them on board.  Both cats immediately went under the front passenger seat which is their “go to” spot while the coach is moving.

All of what I have just described took place with intermittent light rain.  We could not recall the last time we had to load the motorcoach, or our previous motorhome, in the rain, but we agreed that having it parked with the entrance door opposite the sidewalk to the front door of the house made it much more convenient.  Still, it was reminiscent of the “age of camping,” a time in our lives when we camped frequently in a tent with our pre-teen children.  While not a constant companion, rain was a frequent visitor on these outings and yet it never deterred us from going and never lessened our enjoyment.  Indeed, we tried to show our children the special beauty of a hike in a Michigan woodland in the rain or the power of standing near the shore of a Great Lake during a storm.  Cooking was more of challenge, to be sure, but we had a screen room in addition to our tent and made preparing and eating meals part of the adventure.  Our friend Chuck said to me once that we were different from most of the other Prevost owners he and Barbara know because we were “campers.”  True enough, although what we do now hardly seems like camping to us. Still, we are quite comfortable with having the furniture and flooring removed from our motorcoach, sitting on lawn chairs instead, and dining at our fold up plastic side table.

We pulled out of our driveway at 12:30 PM and made our way slowly down our muddy, pot marked dirt road to N. Hacker Road.  It was nice not having to worry about scratching the side of our rig as a result of our tree trimming raid late last night.  Instead of taking our usual route north to M-59 we went south on Hacker which got us on pavement a short distance later.  Most of the trees on the west side of S. Hacker Road were trimmed up high enough but just before getting to Grand River Avenue we got clunked.  Our front OTR TV antenna is the highest thing on the bus.  It is centered side-to-side near the front and probably took the branch.  I should check it for damage the next time I am on the roof.

We went south on Grand River Avenue towards Brighton and less than a mile later took the entrance ramp to I-96 west.  Twenty-three miles later we took exit 122 and stopped at the Mobil Truck Stop for fuel.  We were at 3/8ths of a tank and rather than fill it we only put 80 gallons on board.  That was enough added fuel for approximately 480 miles and our round trip to/from the RV rally would be less than that.

We will not be using the coach for a while after this week and it is not clear what the best thing is to do relative to long term storage.  Filling the tank with fuel minimizes the air in the tank and thus the opportunity for moisture to condense out.  Moisture is a bad thing in diesel fuel as it enables the growth of algae.  I use a biocide additive to inhibit that growth, especially at a fill up just before it is going to sit for a while, and we have a fuel polishing pump to slowly circulate the fuel and remove water and other gunk while the coach is sitting.  That would seem to solve the problem, except for the fact that it is not ideal to store diesel fuel any longer than necessary before using it.  I suspect that we will fill the tank at the Mobil Truck Stop just before returning home, using an extra dose of biocide, and then run the fuel polishing pump all summer.

We continued west on I-96 to the southwest corner of Lansing and then exited onto southbound I-69.  It continued to be overcast with a noticeable wind out of the east.  We thought we were done with the rain but continued to get an occasional sprinkle.  We exited I-69 at US-12 and headed west through Coldwater and the southern tier of Michigan counties.  US-12 is a good 2-lane highway with some left and right and some up and down, sometimes at the same time.  It is a fun drive with nice scenery and passes through three other small towns:  Bronson, Sturgis, and White Pigeon.  We eventually left US-12 onto Old 205 (M-205) and a couple of miles later entered Indiana where the road became SR-19 (IN-19).  A few more miles and then left (east) on CR-4 and a mile later we pulled into Elkhart campground at 4:10 PM.

Linda checked us in and then we drove to site 738, leveled the coach, and shut down the engine.  We went through as much of normal arrival routine as we could, setting up the cat tree, two folding lawn chairs, and our plastic folding side table.  Linda got our WiFi Ranger connected to the RV Park WiFi and got online with her iPad while I used mine to write.

We snacked on pretzels while we were traveling and by 5:30 PM we were ready for dinner.  Linda made a simple salad and then cooked a couple of vegan “burgers” and served them with the remainder of the potato salad she made the other day.  We went for a walk around the campground after dinner and thought we spotted Nick and Terry Russell’s Winnebago Ultimate Advantage motorhome but did not see any sign of them.  The rig had Florida plates but there was a new Honda SUV parked in front.  The last time we saw them they had a Ford Explorer but I have not been keeping up with Nick’s blog so they could have gotten a new car without us knowing about it.

When we finished our walk we unhooked the car.  I forgot to pack my toothbrush so we drove back to the intersection of CR-4 and SR-19 where there is a CVS, a Walgreen’s, and a Martin’s supermarket.  The CVS was the most convenient, and we have a discount card there, so we bought my toothbrush and picked up some pistachios and almonds on sale.  Back at the coach we had small glasses of Moscato and some red grapes.  It’s been a very physical week for us and by 8:30 PM Linda was ready to lie down and watch a little TV.

The TV stations here serve the area surrounding South Bend and Elkhart including the area of Michigan along the Indiana border.  It took me a while to figure out where to point the antennas but I eventually remembered that there a quite a few very tall towers on the south side of US-20 about half way between Elkhart and South Bend.  That was roughly southwest of our location and we were parked facing southwest so it was a simple matter to point the antennas straight forward.  Bingo!  (I should have remembered that the AntennaPoint.com website will give you the bearing and distance to all of the broadcast TV towers with a certain radius of a specified location, but I didn’t at the time.)

The local PBS station was in the middle of a fund raiser (they probably all were nationwide).  That usually means vintage (nostalgic) musical performances and tonight was no exception with a reunion concert by the BeeGees (Brothers Gibb).  Although best known (to my generation) as the “sound of disco,” personified in the movie Saturday Night Fever, the BeeGees performed actively for many years and have a very deep catalog of surprisingly familiar songs.  This concert was filmed in Las Vegas in 1997 and several of the brothers have since passed away.

Good music is good music but popular music tends to take on significance for individuals based on where they were and what they were doing at the time it became popular.  The BeeGees, like Ernest Hemingway, we’re so popular that it became popular to put down the music of the disco era.  Thankfully that time has passed (in both cases) and we can remember fondly “the age of disco” and enjoy the art and artists for what they are, enjoyable and talented.

The BeeGees concert was followed by Motown 25.  I was 12 in 1964 and although I studied and played classical music I was definitely listening to popular music on the radio and that included the new Motown sound.  I was enjoying this concert as well but it was late and even I get tired and sleepy so I turned it off and went to bed.

 

2015/05/21 (R) Cats, Cars, and Tenure

Leave a reply

Linda got up around 6 AM and got ready to go to the bakery.  I was aware she was up but I slept in.  Once up I showered and dressed for the day.  I did not plan to work in the bus today so I did not put on my work clothes.  Instead I needed to catch up on blog entries and take the cats to a 2 PM appointment at Plaza Veterinary Hospital in Farmington, Michigan.

I was putting a few things back in the master bedroom closet and noticed that the air-conditioning return air grill was stuffed full of insulation.  We had found this in the other return air grills and removed it but we overlooked this one.  I removed the grill and then removed the insulation and threw it away.  There was a 1/2″ thick filter material stuffed up in the register behind the insulation.  I trimmed the filter to just fit inside the grill and reattached it to the ceiling.  Putting the rest of the house back together will take both of us so we will do that this evening.  Besides, we like to give the carpets as much time as possible to dry out.

I went out around 9:30 AM to fuel my car and get a cup of coffee at the co-located Dunkin’ Donuts.  Back home I put my floor mat back in front of my main computer station and settled in to check e-mail and work on my blog.  There was a new driver available for the NVIDIA GeForce GPU in my ASUS laptop, so I initiated the download.  AT&T was providing me with a 160 KB download speed and the 277 MB driver said it would take an hour to download.  No point tying up the Internet connection until the download finished so I used my iPad while I waited.

The driver downloaded a little sooner than predicted and then installed quickly.  When I finally opened my e-mail and had another 50 MB of stuff to download; a lot of it BCM related.  They are trying to wrap up the April 2015 issue and sent me several drafts since I last checked my e-mail.  I have not been 100% successful in getting folks attached to the magazine to transmit large files via Dropbox instead of attaching them to e-mails.

Tim Olsen from our GLCC chapter called yesterday to let me know he had registered for GLAMARAMA and wanted to park with the chapter.  I updated my spreadsheet and need to e-mail a few folks to clarify their intentions before giving an updated coach count to the rally parking coordinator.  As often happens, I did not have much time left to work on blog posts before I had to round up the cats and take them to the vet.

Both cats complained for most of the trip to Plaza Veterinary Hospital, but they are cats and that is what they do.  I weighed them on the scale in the lobby and gave the receptionist the pertinent facts concerning their health.  Once in the exam room I opened their carriers.  Juniper immediately came out and explored the room.  We were early and had to wait a while but Juniper stayed very busy.  Perhaps she was looking go for a way out.  Jasper did not leave his carrier.  Perhaps he figured he was safer staying in there.

Dr. Carron examined Juniper first since she was already out of her carrier.  The cats both got a clean bill of health other than some tartar on their teeth.  Dr. Carron did not suggest, however, that they needed to be cleaned at this time.  They each got vaccinated albeit for different things.  Jasper also had blood drawn.  He is just a month shy of being 11 years old and Dr. Carron likes to do annual blood work on cats 8 years of age and older.  Juniper is due for a 3-year rabies booster in December of this year but Jasper is not due again until sometime in 2017.  Besides rabies certificates we may need an International Health Certificate for each cat to get them into Mexico and/or back into the United States if we decide to make the trip to Puerto Penasco in February 2016.

I had just left Plaza Veterinary Hospital when Linda texted me that she was wrapping up at the bakery.  It was already after 3 PM at that point and traffic was thick and slow in the usual places.  I had a nice QSO with Mike (W8XH) on the South Lyon 2 meter ham radio repeater for the last six miles of my trip.  He and several other club members bought Yaesu digital radios at the Dayton Hamvention to use with the new Yaesu Fusion 2m repeater that five of them bought from Yaesu for a special promotional price of only $500.

I got home around 4 PM and replied to Linda’s TXT message.  I got the cat carriers inside and set them free.  There was no hesitation about leaving the carriers this time.  Linda got home around 5 PM, 90 minutes after she left the bakery, and I filled her in on the cats’ veterinary appointments.  While we were chatting we got an e-mail from our son letting us know that Shawn’s tenure at the University of Michigan had been approved by the Board of Regents at their meeting today.  We were understandably pleased (and relieved) to finally receive this news and texted back our congratulations.  Shawna sent back a cell phone photo of themselves celebrating at a local Ann Arbor establishment.  They looked very happy.

Most car dealerships in this market are open until 9 PM on Mondays and Thursdays, and neither of us was ready for dinner yet, so we paid a visit to Champion Chevrolet on Grand River Avenue between Brighton and Howell.  We were greeted by Ken, but he only dealt in used cars and handed us off to Dan Danaher.  He had a Chevy Colorado on the lot so we checked it out.  It was not the 4-door crew cab Z71 off-road model, but it did have 4-wheel drive.  We climbed in/out of the front and back seats and played with the tailgate.  The front seats were fine but I could not sit in the back without the driver seat being all the way forward.  The 4-door Crew Cab adds about 7″ of rear leg room but it would still be tight.  That is one of the tradeoffs with mid-size trucks.  The front seats fit us nicely but this is not a truck for tall and/or large people IMHO.  The Z71 off-road version may sit slightly higher but we should still be able to get in/out without needing an accessory step or running board.

The MSRP for the truck we saw was just over $30,000 and overall felt very similar to the Nissan Frontier, nice but not luxurious.  In other respects, however, the trucks were very different.  The Colorado 4×4 models have a transfer case and can be towed four wheels down with an automatic transmission.  We liked the Frontier but it can only be towed 4-down with the manual transmission and for that reason alone is not a viable alternative for us.

Dan gave us a brochure on the Colorado and made a few notes on what we are looking for.  We would obviously like to see the 4-door crew cab and drive the Z71 4×4 off-road model before deciding to buy one.  He said he would call if/when he had those available for us to see and test drive.  If we ordered by the end of the month we would get a 2015 model but it would take 8 – 10 weeks to arrive.  Starting June 1st orders will be for a 2016 model and still take 8 – 10 weeks for delivery.  Recent history suggests a 0.5% to 1.0% price increase for the new model year.  We do not plan to order a new car before the end of May and a 1% price increase would not motivate us to change our minds about that.

On our way back to our car we took a quick glance at the Camaro sitting outside the showroom door.  If we were buying a nostalgia car thus would be it.  Linda’s first car, purchased before we were married, was a used 1967 Chevy Camaro convertible.  It was white with a red interior and had a 327 cubic inch V8 under the hood.  No emissions controls in those days, just raw power and $0.35/gal gasoline.

We drove to Panera in Brighton and had black bean soup and Mediterranean veggie sandwiches for dinner.  By the time we got home we were ready to relax.  First we took the spacers out from under the living room furniture, so we had someplace to sit, and put a few items back where they normally go.  I opened one of the bottles of Malvasia Bianca white wine from the Heart of the Dessert (Eagle Ranch) winery in Alamogordo, New Mexico and we celebrated our daughter-in-law’s attainment of tenure.  It’s been a good year for our son and his family and it is nice to see things finally falling into place for them.  The wine was very similar to the late harvest Rieslings we get from Michigan’s Leelanau peninsula; very sweet and thus a good cocktail or dessert wine.  We watched the final episode from season 1 of A Touch of Frost before turning in for the evening.

 

2015/05/01 (F) May Day

Leave a reply

Wow, another month gone.

We got up after 8 AM this morning, were having coffee, and had not yet had breakfast when I got a call from Diane at SteelMaster Building Systems.  They are certainly prompt in their follow up as I just submitted an RFQ last night via their website.  I had a very informative conversation with her that left me favorably impressed with the company and inclined towards their products should we decide to build our barn this way.  By the time I finished with her and we spent time studying SteelMaster’s website we sat down to have breakfast at 9:45 AM.

I started a load of laundry and puttered at my desk until Linda had chores for me to do.  She vacuumed the main floor and tidied up the kitchen in advance of tomorrow’s dinner visit with John and Diane and wanted to take the storm door insert out of the front entrance frame and put in the screen.  We like fresh air and have an abundance of it out here in the country.

We drove to the Sears Outlet at Fountain Walk in Novi to buy a box spring mattress foundation.  They were already discounted and also on sale.  The shipping was 50% of the sale price but we could not get it home in our car so that was our only choice.  It was still a bargain and we will have it next Tuesday.  We have been using the heavy, elaborate foundation that came with our Sleep Comfort mattress years ago, but it is broken and needed to be replaced.

We stopped at Lowe’s on the drive back to look at vinyl floor tiles and bought some Oxygenics shower spray heads and soap.  We took a drive up Latson to see if we could find a metal arch garage that Phil Jarrell had recently spotted.  We think we caught a glimpse of it on the west side of the road as we headed north towards M-59.  Heading east on M-59 we took a detour up Argentine Road to see if we could find Phil’s place but never saw anything we felt confident was his.  We headed east on Clyde Road and took Old US-23 back to M-59 where we stopped at Kroger for a few things before returning home.  To Linda’s surprise and delight, the Kroger has some of the mock dairy vegan products, like Daiya cheeses, that she occasionally uses and cannot get at Meijer’s.

Linda had an agenda for today and next up was putting the umbrella in the outdoor table.  Once that was taken care of we sat outside enjoying blue skies, bright sunshine, an air temperature of 71 degrees, and a slight breeze, none of which required the umbrella, but the point was to get it off the floor in the library where it was stored all winter.  Next we moved the natural gas grill from the garage to the lower rear deck, reassembled it, and connected it to the gas supply (it has a quick connect and shutoff valve).  I then busied myself removing the three shower heads and replacing them with the removable spray heads we bought at Lowe’s.  If I did not do that right away they would still be sitting around in their boxes months from now.

Linda used the grill to make dinner.  She grilled seasoned Brussels sprouts, tofu hot dogs, and bananas sliced in half the long way.  This will be the first summer in a long time that we have had a grill.  Linda is excited to have it as it expands her cooking options and provides a way to not heat up the kitchen in the warmest weather.  I am looking forward new dimensions in our meals.

I had planned on reviewing an article for BCM but ended up involved in two phone calls after dinner.  One was with Pat Lintner from GLAMA and our GLCC chapter and the other was with Lou Petkus from the SKP Photographers BOF.  That left just enough time to watch Season 1, Episode 1 of Sherlock on DVD before turning in for the night.

 

2015/01/8-14 (R-W) Q 2015 W2

Leave a reply

2015/01/08 (R) Up On The Rooftop 

A panorama from the roof of our bus. Left edge is NE, center is S, right edge is NW.

A panorama from the roof of our bus. Left edge is NE, center is S, right edge is NW.

As forecast, we woke up to cloudy skies and milder temperatures.  The clouds to the southwest looked like they might produce rain but the winds were blowing gently from the southeast so the rain would not be for us.  This was the day we’ve been waiting for, the perfect kind of weather for washing a bus.  But not first thing in the morning.  Coffee and breakfast come first while we wait for slightly warmer temperatures.

The waste water tank level sensors are not accurate but our fresh water tank sensors are OK.  The fresh water level gauge was showing less than 1/3 tank and the grey water tank gauge was showing full so it was probably time to dump and fill.  When I checked the fresh water level visually we were at 1/6th tank.  I dumped the black water tank and then the grey water tank, both of which were fairly full, and then filled the fresh water tank.  I have the city water regulated to ~50 PSI (static) which drops to ~30 PSI when the fill valve is fully opened.  At that pressure it takes about 40 minutes to fill the tank.

I last dumped the waste tanks on December 30th and added 25 gallons of (hard) fresh water.  On December 31st I added another 30 gallons of (hard) fresh water.  On January 2nd I recharged our water softener, drained about 1/6 tank (~20 gallons) of (hard) fresh water and filled the tank with 120 gallons of soft water.  I checked the hardness of the water coming out of the softener after that fill and it was 1.5 grains/gallon (25 ppm).  I checked it again after today’s fill and it was still 1.5 gpg.  Since we are keeping a log of the dumps and fills I plan to check the hardness after each fill so can regenerate the water softener before it gets depleted and we end up with really hard water in our tank and system.

Butch happened to be at the Post Office Annex today checking the P. O. Box at exactly the same moment a postal worker was about to put something in the box and then stopped because of the forwarding tag.  The “something” was our package of water hardness test strips from Bristol, Indiana and the worker was kind enough to give it to Butch to give to us.  He also learned that they still have P. O. Boxes available so he went to the main post office to find out more about that.  He came back with a form to fill out and it had room for all of our names so the six of us are going to share the box and the cost, which is $56 for six months, or just under $20 per couple.

While the fresh water tank was filling I started getting ready to clean the roof by getting out our Little Giant step/extension ladder and various cleaning supplies.  The dump and fill was done by 11 AM and it was warm enough by then to start working.  Swim trunks, a white T-shirt, and Kean sandals was the uniform of the day.  I carried the hose sprayer up the ladder with me and then lowered it down to use as a hook and lift wash water bucket, scrub brush, and other paraphernalia up to the roof.

It turned out to be sunnier than I had hoped but I worked for about four hours, not including a lunch break, and scrubbed the entire roof.  I used McGuire’s red automotive soap and rinsed thoroughly.  I had already washed the roof once using Dawn dish soap (a big ‘no no’, apparently) and a long-handle soft brush.  That washing had removed surface dirt and revealed the full extent of the dark “spotting” that gave the entire roof a mottled appearance.  The roof looked a lot better after I scrubbed it but a lot of the spotting remained.

We are anxious to clean the sides of the bus but there is no point doing that until we are done with the roof.  We want the roof “like new” clean so dirt doesn’t run off it onto the sides, but we also want it clean because we are seriously considering having Discount Solar (here in Quartzsite) install solar panels and a charge controller and do all the wiring.  As long as we had the hose, brushes, and soap out we decided to wash the car.  It was even filthier than the bus, if that’s possible, and it was nice to finally have it clean.

After cleaning up our equipment I got cleaned up and then sat and visited with Butch for a while.  Linda came over and announced that she wanted me to take her to dinner.  Butch and Fonda decided to go too so we went to Crazy Jerry’s, which is not to be confused with Silly Al’s.  Silly Al’s is supposedly the #1 eatery in Q, at least for pizza, but they have karaoke every night starting at 7 PM.  Thank you, no.  Crazy Jerry’s also has pizza and we tried the vegetarian, hold the cheese.  Very thin crust (the way we like it) and lots of topping.  A couple of side salads and a side order of French fries.  FWIW, we did not eat the entire pizza and brought home the leftovers.

Linda split a pair of Scrabble games with her brother, the first one he has won in quite some time.  She had an e-mail reply from Mara.  She is camped about 70 miles south of Q and is headed here in the near future and is going to camp with the WINs (Wandering Individuals Network).  I checked e-mail, updated my BCM article spreadsheet with two more story ideas, played a few games, and worked on this post before turning in for the night.  We will have been here a month as of Sunday.

The Hi Jolly Daze Parade. Quartzsite, AZ

The Hi Jolly Daze Parade. Quartzsite, AZ

2015/01/09 (F) The P. O. Box

I left the ladder setup yesterday so I could check the roof again this morning and determine what additional cleaning measures, if any, I might want to take.  I also wanted to get back up on the roof and measure the space we have available for solar panels.  I was expecting two packages via UPS; one from B&H Photo (Manfrotto nodal panoramic tripod head) and one from Sure Marine Service (Webasto repair parts).  I had a nice view of the mountains surrounding Quartzsite from the roof of our bus and wanted to shoot some panoramas with the new head when it arrived.

Butch, Fonda, Jim, Barb, Linda, and I all went to the U. S. Post Office in Quartzsite this morning to sign up for our very own P. O. Box which means we finally have a way to receive USPS mail while we are here.  Just in time, too, as Q has really filled up in the past week and there is more to come.  I have an FMCA national education committee meeting on Monday and need to write a few items for a member survey and review other materials.  Gary (from BCM) is also due to arrive on Monday, and both Curtis (from RVillage) and Mara Culp (HFH build acquaintance) may be headed this way as well.  I believe Chris Dunphy and Cherie Ve Ard of Technomadia are already in the area.  The big RV tent is up and those vendors are arriving and setting up.

Once we were done at the post office I went to Discount Solar to discuss a possible installation on our coach.  The Kyocera panels are 26.5″ W x 59.0″ L.  They are “12 V panels” but are rated at 140 Watts putting out 7.9 Amps.  They cost $350 each.  Those numbers compute to an output voltage of 17.5 VDC and $2.50/W.  (If a 140 Watt panel was operating at 13.8 Volts it would produce just over 10 Amps.)  Because we have a 24V battery system we would need to install the panels in series-connected pairs.  The preferred installation for the rectangular panels is to have the long dimension lined up fore-n-aft to either side of the centerline of the roof.  Tilt mounts are available ($45/panel) but we would probably not install them due to the difficulty of getting onto our roof to use them.

“12 volt” batteries typically charge at around 13.8 to 14.1 volts.  Our “24V” system charges at 27.6 to 28.2 volts and a series-connected pair of panels produces 7.9 A at 35V (full sun) for 276.5 volt-amps, which is essentially “watts.”  Two pairs would produce 15.8 A (553 V-A), and three pairs would produce 23.7 A (829.5 V-A).  The higher voltage output of the panels is reduced and regulated by a solar charge controller before getting to the batteries.  Discount Solar carries Blue Sky and Trimetric maximum power point tracking (MPPT) controllers and the Blue Sky Solar Boost 50 would handle three series-connected pairs for about $550.  The MPPT controllers are DC-to-DC converters so they convert the excess voltage into additional current.  With full sun this six panel system could supply up to 30 A of charging current at the proper voltage, which is why we would need an MPPT controller that can handle more than 30 A of charging current.  We would also want room for expansion or replacement with higher wattage panels if they were available at some point in the future.  One of the nice things about the solar system is that it would always be on and would “play nice” with our other charging systems. Another nice feature is that they are silent when operating.  Ahhhh.

Because of the size of our house battery bank (400 A-Hr at 24 VDC) and the fact that we have a residential refrigerator, auxiliary air-compressor, and other AC loads, we would need/want at least six panels.  (I have not included the four Group 31 wet cell batteries that are used to start the engine and power the chassis as part of the solar system.)  If the batteries were discharged 50% (200A-Hr) it appears that it would take just under seven hours to bring them back to full charge based on the 30A charging current.  In actuality it would take longer in a boondocking situation as the sky is not always clear, the sun is rarely directly overhead (perpendicular to the panels), there would be devices using some of the energy, and the amount of current the batteries can accept falls off as they get closer to being fully charged.

Installation is $90/hour plus mounts ($15/panel), wire, connecting blocks, and other parts, and would take 4 – 5 hours to complete.  The owner assured me they would have it in and out in one day so we could be back in our parking spot before dark.  The last three weeks of January are the busiest time of year for Discount Solar and since we are plugged-in to shorepower we do not need the solar system right away.  If we have it installed in early February we would have a month to make sure it works and resolve any problems.  The system would cost about $3,300 installed.  We have at least a month to think about it.

When I returned to our coach Linda was out walking.  When she got back I went up on the roof with a tape measure to see if/how the solar panels might fit.  With a four-n-aft orientation we could put two towards the front outside edges, one just aft of the kitchen skylights on the driver side, and one aft of the hall skylight on the passenger side.  We could put two more somewhere in the rear.  The options for the rear appeared to be inline (almost touching) on the driver side starting just behind the bathroom skylight or putting one there and the other one sideways across the back just ahead of the dropped portion of the roof and aft of the bedroom vent fan.  Placing the panels in these locations would leave the center of the roof open so I could climb up on the driver side front and walk all the way to the back.

Barb stopped by to let us know there was a mattress in the house (park model trailer) if we wanted to try it out.  It had been in their rig for about two years until they removed it yesterday and replaced it with a thicker one they got from Connie.   It is a regular queen size mattress about 6″ thick, so not one of the oversized behemoths that have become the norm.  They also had a 1.5″ thick memory foam pad to go on top of it.  We took a look at it and decided to give it a try.

We have been using our old Select Comfort adjustable air mattress in the RV since summer 2013.  One side (mine) has a slow leak so I have to adjust it every other night.  I could live with that indefinitely but what we really dislike about it, and have for a long time, is that we tend to roll into the center or off the edge.  It also takes up valuable storage space under the bed for the pump, has wires and hoses to deal with, and has a controller for each side.  We were definitely ready to try something else so we stripped the bed, disconnected the two air hoses, and carried the mattress out of the bus.  It was surprisingly heavy and bulky for an air mattress and lacking in self-supporting structure, but that also made it easier to bend it around the front passenger seat, down the entry stairs, and out the door.  We stored it in the bedroom of the house trailer pending a final decision about the replacement mattress.

We carried the new mattress in, which was definitely easier than getting the old one out, and got it positioned on the plywood bed platform.  We put the memory foam pad on top and put our mattress topper over that which added another inch.  We put our electric heating pad on and then the sheets and the blanket.  We will try it out for a while and if we like it we will see if the Salvation Army wants the old one.  If not, it may end up at the Quartzsite dump as we really do not have any way to get it home or a reason to do so.  We will leave the pump, hoses, and controllers under the bed until we decide on its final disposition.

The suspension on the bus had settled slightly in the driver side rear since we parked and leveled it almost a month ago.  It would not have been enough to require an adjustment except that our bed sits crosswise with the head on that side and I find that sleeping with my head even slightly downhill is not comfortable.  Rather than start up the main engine we got the Dewalt portable air-compressor out of the car and connected it into the brake system fill port in the passenger side engine bay.  I had to connect the chassis batteries and turn the ignition on (without starting the engine) in order to activate the leveling controls, but that allowed me to raise that corner up and get the coach level side-to-side.  At some point we will re-position the bus, but not until I have completed some work on the turbo boost sensor mounting plate and hose and the level low system components for the front end.

We put the air-compressor back in its special storage divider in the car and decided to rearrange a few things so we could put the rear seat down.  Starting next week we will need to be able to carry a passenger.  We thought about heading down to the market area but remembered that we were expecting UPS deliveries.  I started working on two more articles for BCM instead while Linda went for a walk.  It was warmer today and so it was warmer in the coach and I ended up taking a nap.

Our UPS and FedEx shipments usually arrive late in the afternoon or early evening but had not shown up by dinner time.  I had planned to disassemble the Aqua-Hot burner and replace the bearings, nozzle, and perhaps a few other small parts tomorrow but it now appears that will have to wait until Tuesday, assuming our shipments arrive on Monday.  I will likely need to clean the unit as well, given that it has been running so rich, and that may include pulling the combustion chamber.

Linda made two cold salads for dinner; chickpea and wild rice Waldorf.  Both are favorites of ours, especially in warmer weather.  We had some Barry’s Basic Bread with our meal and another glass of Lamb’s Valley organic sweet white wine was a most agreeable accompaniment.

Yup, that's a real, live camel in the Hi Jolly Daze Parade. These animals are strongly linked to the 19th century history of Quartzsite, AZ.

Yup, that’s a real, live camel in the Hi Jolly Daze Parade. These animals are strongly linked to the 19th century history of Quartzsite, AZ.

2015/01/10 (S) Hi Jolly Daze Parade

Today was the annual Hi Jolly Daze Parade.  As first time winter visitors to Quartzsite there was no way we were going to miss this event.  I was up at 7 AM to make coffee and we were done with breakfast by 8 AM.  We checked the parade route online and figured we would go to the Quartzsite Improvement Association grounds as the parade ended in the parking lot there.  It was scheduled to start at 10 AM so we snagged Fonda about 9:40 and headed that way in the car.

When we got to Central Avenue and Main Street the police had Main Street closed so we could not turn left to get to the QIA.  I stayed on Central down to Kuehn Street and took it east over to the exit 19 overpass and back to Main Street.  On the way we saw Lloyd DeGerald’s motorhome parked along Kuehn with a big banner advertising his Aqua-Hot technician services.  I am hopeful that I will be able to repair both of our burners myself but if not Lloyd is the guy I would call, so I was glad to see that he is in town.  But back to the parade.

The police had Main Street closed on that end too.  We knew the parade started at Plymouth Avenue and Quail Trail so we headed in that direction and parked at the Quartzsite Library.  We were surprised that no one else was parked there as it was a short walk from there to the start of the parade route which turned out to be an excellent spot from which to view the parade.  What we realized after we got there was that the west side of Plymouth Avenue was lined with cars from the starting point all the way to Main Street.  I suspect that Main Street was similarly lined with people, most likely in cars, but we were not able to observe that directly.

We had a few drops of rain leading up to the start of the parade.  There were plenty of grey clouds around, but the sun was also shining and the parade did not get rained out.  In fact, a full 160 degree rainbow formed behind the parade and lingered until most of the participants had passed us.  The highlight of the parade was a live camel.

“Hi Jolly” was the Americanized pronunciation given to Hadji Ali, who came here in 1856 as part of an experiment by the U. S. Army in the use of camels.  There are conflicting accounts of his exact place of origin but it seems clear that he came to the U. S. from the Middle East as one of the first, and the lead, camel driver.  For a more complete account check the entry in Wikipedia for “Hi Jolly.”

The experiment did not work out as the Army’s horses, mules, and burrows were apparently terrified of the giant animals and would panic in their presence, but Hadji Ali remained in the U. S. and eventually ended up in Quartzsite where he died in 1902 and was buried in the local cemetery.  We got the impression that he was something of a living legend in his own time and in the 1930’s the governor of Arizona had a monument erected at Hi Jolly’s gravesite.  It is a small pyramid made of local stone with a metal plaque on one side and a metal profile of a camel on top.  According to Wikipedia the monument is allegedly the most visited location in Q.

When the parade was over we returned to our coaches.  Linda went for a walk and I wrote another article for Bus Conversion Magazine.  This was another short one, less than two pages and only 11 photos, on the installation of the new speedometer in our bus.  When Linda returned from her walk she made a broccoli-potato mash.  In addition to the broccoli and the potato it had soy milk, vegan butter, salt, and pepper.  The potatoes were not completely mashed and the dish was both tasty and had a nice mouth feel.

After lunch Linda made a shopping list.  We headed to the Kuehn Street market area and stopped at Barry’s Breads but our timing was bad, again.  We drove south on Central and found the entrance to the parking lot for “the big tent.”  This is where the RV vendors will be in another week or so, but nothing was open yet, so we went over to the Tyson Wells area west of Central Avenue and found some miscellaneous items and a pair of Crocs for me.  For all the shoes I brought I did not have something that was easy on, easy off.  We are parked on gravel and I needed something I could slip on quickly and easily to step outside the coach.

Most of Linda’s list was groceries so we drove to Blythe, California to do our shopping.  To vary our trip and see some new sights we stayed on Kuehn Street heading west past the edge of town where it became West Dome Rock Road.  The road parallels I-10 on the south side for a long way through BLM land and eventually ends at an interchange with the Interstate.  We saw lots of RVs, and a few tents, spread out on either side of the road, but not nearly as many as we thought we would.  There are probably a lot more RVs here than we realize, but the desert is a vast place.

When we got to Blythe we took a few minutes to drive through town and get a feel for the place.  It had a more developed, modern, and prosperous business district than Quartzsite and more houses, as opposed to park model trailers and mobile homes. The houses were not fancy but they were in decent condition.  Schools and municipal buildings were also nice, and there is nothing in Q to compare to the two supermarkets and name brand stores like Auto Zone, NAPA Auto Parts, and K-Mart.  We started at Albertson’s and got most of the items on our list.  We then went across the street to Smart and Final Express and picked up a few things there.  Once again we were not able to find the Silk brand Soy Coffee Creamer, which has us wondering if we last bought it at Wal-Mart in Parker.

When we got back to camp I unloaded the car and Linda put the food away.  I wandered over to say high to Butch and Fonda and play with their dogs, Daffy and Rascal, for a few minutes.  I then went over to say high to Jim and Barb’s dog, Roho, which brought them out of their motorhome and got me invited in.  Linda eventually wandered over looking for me and the four of us had a nice chat.  It was the first time since they got here that I had been inside their rig, a Country Coach Intrigue, and it was very nice.  It has one slide on the front half of the driver’s side, and there is no doubt that it really opens up the interior.  Before we bought our bus we were looking seriously at Country Coach motorhomes (but not their Prevost bus conversions) and the Tiffin Allegro Bus (which is a purpose-built motorhome, not a true bus).  But in the end we were bitten by bus fever and we still have it.

We stopped to visit briefly with Butch and Fonda on the way back to our rig.  Butch has always had an interest in metal detecting and has developed an interest in rocks since arriving in Quartzsite.  If you had the slightest inclination towards rocks, gems, and minerals then being in Quartzsite during the winter would likely push you over the edge into a full-blown hobbyist.  Sometime in the last couple of days Butch bought a used contraption that consists of a table saw, two grinding wheels with a water delivery system, and an electric motor.  He and Fonda acquired a bucket of rocks, including a piece of petrified wood, and they are setting up an area outside their bus to work on their new hobby.

For dinner Linda made pan-grilled tofu slices with caramelized onions and bar-b-cue sauce, but with a twist.  Instead of hamburger buns or slices of bread she heated 12″ tortillas and made wraps.  Of the various ways she has served this simple, but delicious, dish this was definitely my favorite so far.  As much as I like a nice, fresh bun the tortilla wrap kept all of the ingredients contained so that I got onion and BBQ sauce with each bite, and they did not end up all over my plate and all over me.

As we do most evenings, we relaxed, played games, worked puzzles, read, and wrote. We are always a bit surprised at how tired we are after dinner, but we are up and about during the day and the fresh air and sunshine just seem to wear us out.

The roof of our bus after cleaning looking SW as viewed from the driver side front corner. Quartzsite, AZ.

The roof of our bus after cleaning looking SW as viewed from the driver side front corner. Quartzsite, AZ.

2015/01/11 (N) Swimsuit In January

I turned the lights off last night at 11 AM and was up at 7 AM this morning which seems to have become my current routine.  Because of the new (to us) mattress I was able to get up without waking Linda up.  I turned up the heat in the front of the coach but not the back as Linda does not sleep well in a warm room.  I started getting the coffee ready but did not grind the beans because of the noise it makes.  I worked at my computer on organizational tasks such as copying files to the NAS, copying blog posts from e-mail to Word, and backing up website and photo files to the NAS.

Linda got up around 8:30 AM and set the microwave convection oven to preheat in convection only mode.  When it was ready she heated up the leftover cinnamon raisin rolls she took out of the freezer yesterday and put in the refrigerator.  While the rolls were heating I finished making the coffee.  Although they are not gigantic, one of these rolls would probably be plenty of calories for breakfast.  Two rolls, however, made for a very satisfying meal.  Still, they take about four hours to make fresh and about 25 minutes to reheat.  She makes a batch of eight, so if we each had one for breakfast her efforts would cover four meals instead of two.

Today was another bus cleaning day, but first Linda went for her morning walk while I continued to organize photo files on our network attached storage device.  It was forecast to be a cloudy but mild day and by late morning the clouds had moved in, so when Linda got back we got busy.  Even with the cloud cover it was warm enough that I was able to wear my swimsuit and a T-shirt, my preferred outfit for working with water.  We bought some CLR Mold & Mildew remover yesterday and I tried using it on the lower rear roof.  It did not appear to have any effect so I abandoned any further roof cleaning and we got started on the sides.

The upper sides of our bus are not easy to clean.  Even with our Little Giant extension/step ladder set up as a step ladder at its maximum height I cannot quite reach the top curve of the side walls.  Knowing that was the case I cleaned all the way around the edge of the roof, where it meets the side walls and the front and rear caps, from the roof.  Once I was done with that we took the Little Giant extension/step ladder and converted it from extension configuration to step ladder configuration.

We worked all afternoon until after 5 PM and managed to clean the front and the passenger side.  We wanted to get the passenger side done because it faces south and we wanted to do this on a cloudy day.  Working a section at a time we used McGuire’s red automotive soap, scrubbed with an automotive microfiber sponge, rinsed thoroughly (with Q’s incredibly hard water), and dried with microfiber clothes.  We could not get all of the hard water stains off but it was a lot cleaner, and looked a lot better, than when we started.

The weather forecast for tonight was for heavy rain sometime between 9 and 11 PM with accumulations of up to 1/2″.  For a place that typically only gets 4″ of rain a year that would be a lot of rain for one storm.  We put our lawn chairs, mats, and other outdoor items in the carport for the night just to be safe.  Shortly after 6 PM we had our first sprinkles.

For dinner we had chickpea salad and wild rice vegan Waldorf salad with strawberries and peach slices and some Barry’s Basic Bread with a small glass of Franzia Fruity Red Sangria.  I responded to some e-mails after dinner and deferred work on possible survey questions for the FMCA national education committee until tomorrow.

Linda makes her selections at the Quartzsite Farmers Market.

Linda makes her selections at the Quartzsite Farmers Market.

2015/01/12 (M) E-mail Groups

It has stayed warm enough the last few nights that I have not needed the electric heating pad and we have been able to leave windows slightly open.  We both sleep better in a cool room with fresh air.  The deluge of rain that was forecast for last night did not develop but it was still mostly cloudy when we got up this morning.  After breakfast, coffee, morning puzzles, and checking in with the world we got on with our chores.

My major tasks for the day revolved around preparations for, and participation in, a 2 PM FMCA National Education Committee work session.  While I worked on that stuff Linda went for her morning walk, made an appointment to get her hair cut tomorrow, and made garlic naan (Indian bread) from scratch.  When the phone meeting was over I transferred photographs from my camera to my computer and then joined Linda over at Butch and Fonda’s coach for a late afternoon visit.

Jim L. showed up while we were chatting, read the electric sub-meters, and figured out our bills.  Linda had to write four separate checks to cover our site fee, electricity usage, laundry, and the rental for the apartment, which Jim gave to Barb to cover the cleaning before and after Marilyn’s upcoming visit.  Butch placed an order with PartDeal.com for a VDO speedometer so I had him order a VDO Cockpit Series 0-30 PSI Boost Gauge for me.  The UPS truck also showed up and had the two packages I have been waiting for.  All too soon the sun dropped below the western mountains and it turned chilly so we retreated to our coach.

Linda made curried red lentils for dinner and served it along with the garlic naan bread she made earlier in the day.  Warmed and energized by this fabulous meal I launched into my second major task of the day; the creation of an e-mail group in Microsoft Outlook for our FMCA Great Lakes Converted Coaches chapter.  I got the latest roster from Linda, who is the treasurer, and was able to rearrange it, save it as a CSV file, import it into Outlook, and map it to the standard contact fields.  It was then easy to create a Contact Group and select all of my new entries to go in it.  Once I got the group set up I wrote an e-mail to the members, my first since being elected President of the chapter back in October.  I was up much later than usual, but I got it done.

Escapees RV Club happy hour SE of Q in one of the BLM STVAs.

Escapees RV Club happy hour SE of Q in one of the BLM STVAs.

2015/01/13 (T) Geekiness

Today was a day for Geeks and geekiness.  Chris and Jim Guld, AKA The Geeks On Tour, arrived in Quartzsite yesterday and are staying at an RV Park not far from our encampment.  Butch knew they were headed this way and after he and I were unable to get EchoLink working on his computer yesterday he contacted Jim to see if he would be willing to stop by and take a look.  Jim is a former network administrator and knows a lot more about stuff like networking, protocols, ports, port forwarding, and proxy servers than we do.  But before he came over Linda and I had breakfast after which she walked over to the beauty parlor and got her hair cut while I worked on a seminar classification task for the FMCA National Education a Committee.

Jim G. arrived on his bicycle around 10:30 AM and stayed for a couple of hours.  He re-checked the things Butch and I had already tried and tried some things we had not, but we could not get Butch’s system to let the EchoLink program connect successfully to the EchoLink servers.  For the record, Butch’s system consists of a Windows Vista laptop that connects to the Internet one of two ways:  1) through a Verizon MiFi or,  2) through a WiFiRanger Go2 into a WiFiRanger Mobile into a DSL WiFi gateway of unknown make and model.  Jim also tried connecting through the WiFi hotspot on his Android-based smartphone.  Same result.  Mixed in with work we had a great visit with Jim and hope to meet up with he and Chris at least once while they are in Q.

After Jim left Linda and I were headed in to have a bite of lunch when an unfamiliar car pulled into the lot.  Barb was by the road and pointed the driver in our direction.  We quickly realized that it was Mara.  She had called Linda first but Linda did not hear the phone ring so it was a wonderful surprise when she showed up.  We visited for a couple of hours while we snacked on hummus, pretzels, and red grapes.

Mara is camped on BLM land north of town with the WINs (Wandering Individuals Network) and has been traveling off and on with groups of WINs since we last saw her in Gillette, Wyoming in July 2013.  Since that time she has also gotten a different motorhome, a 35′ Fleetwood Bounder, with which she is very pleased.  She invited us to join a group of WINs on Sunday to go to The Desert Bar and I think we will.  Linda checked it out online and it is a completely solar-powered, off-the-grid, place.  You have to take dirt roads or ATVs to get there.

It appears that things are finally going to get busy for us.  Gary, from BCM, is supposed to arrive tomorrow and Curtis, from RVillage, is supposed to arrive on Saturday.  Forrest and Mary are already here as are Chris and Cherie of Technomadia.  The Escapees RV Club has happy hours scheduled tomorrow and Thursday at one of the BLM areas east of town.  Blythe, California has a bluegrass festival starting Friday and running through Sunday.  We will probably go on Friday as there is also a Balloon Festival in Lake Havasu the same three days which we will probably attend on Saturday.  Somewhere in there I need to repair our Aqua-Hot and I am thinking that it will probably be Thursday.  The “Big Tent” Sports, Vacation, and RV Show starts on Saturday (17th) and runs through the Sunday the 25th.  Marilyn arrives on the Thursday the 22nd and leaves on the Thursday the 29th.  The last full week of January really is the peak of the winter season in Q.

After Mara left I used my macro lens to photograph the front and back of both of our amateur radio operator licenses.  I post-processed the images to improve the readability and reduce the file size.  Once I had the photos ready I downloaded and installed the EchoLink software on my Asus laptop.  I went through the initial configuration for my license and tried the server connection test.  As with Butch’s installation, two of the four UDP port tests failed.  I ignored that for the moment and went ahead with the validation procedure for my ham license.

Anyone can download and install the EchoLink software but only licensed hams can legally use it.  That is because it can, and often does, connect a computer to a ham radio repeater that is “on the air” and only licensed hams are allowed to transmit on those frequencies.  Validation was a multi-step process.  When first starting EchoLink I had to supply my FCC callsign, name, and (base station) location.  That information was transmitted to a database on the EchoLink servers but the EchoLink organization needed to validate that I was actually the person to whom that callsign was issued.  Through a separate process on the EchoLink.org website I had to upload JPEG image files of the front and back of my wallet license.  Once someone examined the images and made sure the call was active in the FCC database they “flipped the switch” on the server side and I was finally able to connect to stations if I wanted to.  I repeated the process later for Linda’s license.

While I was waiting to have my license validated I started trying to figure out how to get the EchoLink program to connect successfully to the EchoLink servers.  When the communications test with the servers runs it identifies the IP address assigned to the computer.  I went into the WiFiRanger Mobile and enabled UDB port forwarding for ports 5198 and 5199.  The TCP test was successful so I did not set up TCP port forwarding for port 5200.  Enabling port forwarding, however, was necessary but not sufficient.

What I ended up doing was switching the operating mode on the ESET Smart Security program from “Automatic” to “Interactive.”  With that change, the program would pop up a message box every time another program had outbound or inbound traffic through a port and ask if I wanted to allow the communication and optionally create a rule for it.  Several of those messages had to do with EchoLink and after clicking “Allow” to all of them the server/router tests were finally all successful and the program was fully functional except for the license validation.

Sometime in the late afternoon another motorhome showed up and backed in to the property with Jim L.’s help.  It was Larry and Sandy, who normally stay at Jim L.’s RV Park near the QIA.  Jim’s park is full so he put them over here in the spot by the laundry where Jack and Maria parked for a couple of nights a week or so ago.

We had leftover red lentil potato curry (thick soup) for dinner with the rest of the garlic naan and a glass of sangria and it was very good, again.  I finished up my FMCA education committee task and e-mailed it off.  I received an e-mail that my ham license had been validated so we played with the EchoLink program and User’s Guide for a while but did not try to connect to any stations.

While I was working on all of this I noticed that nine updates were pending for Windows 8.1 and there were four optional ones as well.  Installing updates is often an iterative process and so it was again this evening.  One of the optional updates was a roll up from November 2014 that was 723.9 MB.  That’s a big update.  I started downloading it at 23:52 MST and then went to bed.  My hope was that fewer people would be trying to use the local DSL system to get online at that hour and the update might actually load and install successfully.  But I would have to wait until tomorrow morning to find out.

L-to-R: Travis & Melanie Carr from the Escapees RV Club and Cherie Ve Ard & Chris Dunphy of Technomadia.

L-to-R: Travis & Melanie Carr from the Escapees RV Club and Cherie Ve Ard & Chris Dunphy of Technomadia.

2015/01/14 (W) SKP Happy Hour

As soon as I got up this morning I checked the huge Windows 8.1 optional rollup update that I started last night.  It had completed successfully except for restarting the computer, so that’s what I did.  While the update finished installing I made coffee and got the juice ready and Linda prepared our cereal.

Once the update finished I checked e-mail and websites.  Linda made white bean hummus to take to the SKP Happy Hour later today.  She then remembered that the Farmers Market at Desert Gardens was this morning from 8 AM to noon so we drove over there.  There was only one stand selling produce, but they were from Blythe, California only (20 miles away) so the produce was very local and very fresh.  Linda bought an assortment of veggies and a grapefruit.

We had parked at the south end of the western parking area and from there we could see a road going back towards “Q” Mountain and a well-defined trail going up the western side.  We drove back there and determined that we could park there when we decide to climb the mountain and do some panoramic photography.

We drove to Barry’s Breads and bought a loaf of Barry’s Basic Bread and then continued east on Kuehn Street to confirm Lloyd DeGerald’s location.  We took Riggles Avenue back over I-10 to Main Street and headed back towards Central Avenue, stopping at the Road Runner Market for a few things.  When we got back Jim and Barb were aggressively trimming the Palo Verde trees in the cactus garden.

As we often do most mornings, Linda went for a walk and I worked at my computer, installing three more optional updates and taking care of some e-mail.  We gathered up chairs, food, and beverages at 12:45 PM and drove over to the SKP Happy Hour on East Dome Rock Road.  There was already quite a crowd when we arrived and everyone was in a good mood.  And why not.  The sun was shining, the air temperature was pleasant, there were tables arrayed with food, people had beverages of their choice, Johnny Cockrum was performing, and lots of folks were meeting old and new friends.  We had a thoroughly pleasant time, but we always do when we are with groups of Escapees.

On the way back to camp we spotted Lloyd DeGerald and his wife out walking their dog and stopped briefly to chat about our Aqua-Hot.  We then stopped at the trailer for the Two Crazy Ladies and ordered engraved hang tags with our call signs and a sign asking emergency responders to rescue our cats.

When we got back to camp Linda went for another (short) walk and I sat down to work at my computer.  We lost our Internet connection while we were away and the DSL gateway would not re-associate with our WiFiRanger Mobile so I had Barb open the house and I power cycled the gateway.  I was then able reestablish the connection to our WFR-M.  That is the second time this has happened since we arrived here but so far has not caused us any real difficulty.

Butch has been having problems with their Progressive Industries EMS cutting off their shorepower due to high voltage.  We noticed during dinner that our PI-EMS was also showing a PE-3 (previous error – high voltage).  I do not know if our Magnum inverter switches on “instantly” when outside power is lost or if there is a delay but I am now wondering if we lost our Internet connection due to loss of power to the WiFi Ranger Mobile after which it was not able to reconnect with the gateway.  The next time this happens I may try powering the WFR-M off for 60 seconds and restarting it.  It’s also possible that the high voltage is wreaking havoc on the DSL gateway.

After dinner I sent a TXT message to Gary at BCM inquiring if he had arrived in Q as planned.  He called back and said they had just cleared Indio, California.  I suggested they find someplace to stop and rest and finish the trip tomorrow morning in the daylight.  They are headed to the Quartzsite Market Place dry camp area for the Eagles International bus gathering.  I spent the rest of the evening working on five different articles for Bus Conversion Magazine before finally turning in around midnight.

 

2014/10/08-15 GLCC and Bus Work

Leave a reply

2014/10/08 (W) Rally Ho!

Today was a travel day so I had a light breakfast and went to the Small Town Brew for a cup of coffee rather than create a mess making my own.  I donated $2 for this cup and did not have a refill so the three cups I consumed over the last two days averaged out to $1 each.  I spent most of the morning helping Butch investigate possible routes for the engine preheat plumbing for their new International Thermal Research (ITR) Oasis Combi diesel-fired hydronic heating system.  I also adjusted the front bus tire pressures and all four of the car tire pressures.

As noon approached I switched to departure mode.  I changed out of my work clothes into something cleaner and more comfortable for driving, finished packing all the stuff I had in the guest bedroom, and loaded it into the bus or the car.  I targeted a 1 PM departure.  Butch had to go to town so we said farewell until Friday and he took off.  By the time I started the bus, pulled it across the street, moved the car over, hooked it up for towing, and checked the lights (with Fonda’s help) it was closer to 1:30 PM than 1:00 PM.

The drive to Elkhart was pleasant and uneventful.  The speedometer sat on zero for the first quarter of the trip, bounced around for the second quarter, indicated 85 MPH (max speed) for the third quarter, and settled in to something like the correct speed for the final quarter.  This is the way it had behaved for quite some time before it got unplugged so this confirmed that it did not work correctly and needed to be replaced.

I took SR-16 east to US-31 north to US-20 east to CR-17 north.  CR-17 becomes MI-217, the Michiana Parkway, which ends at US-12.  I took that west to Old M-204 west and followed it past Phoenix Paint back into Indiana where it becomes SR-19 south.  I turned east on CR-4 and a mile later turned into the entrance to Elkhart Campground on the south side of the road.  This route is at least 15 miles longer than necessary.  There is an exit for SR-19 north off of US-20, which is a much more direct route, but requires driving through the heart of Elkhart.  There was major road construction on this stretch of SR-19 the last couple of years, including a bridge, with narrow lanes and weight restrictions.  That work is all completed, and the road is much better now, but it is still a more urban route with stop lights, turns, and traffic.

Our coach (front, right) at the FMCA GLCC Surplus & Salvage Rally, Elkhart CG (Elkhart, IN).

Our coach (front, right) at the FMCA GLCC Surplus & Salvage Rally, Elkhart CG (Elkhart, IN).

I checked in to the campground and then got parked in my assigned site.  I was one of the last coaches to arrive.  I went through my arrival routine and got the coach setup to use before visiting with fellow GLCC chapter members, some of whom I had never met.  I chatted briefly with Michele Henry from Phoenix Paint to confirm her availability to work on a BCM article later in the evening and then went to Martins supermarket to get a salad for dinner.  The Martin’s supermarket on SR-19 at CR-4 has a really nice salad bar and I made a big salad with lots of ingredients, all vegan of course.

I took my salad over to the meeting room at 6 PM and had dinner with the group.  I was expecting Michele at 6:30 PM so I excused myself and went back to my coach.  She showed up a little after 7 PM.  We worked until almost 10 PM and managed to go through the entire article.  I did not have the photos on my new computer so the selection, processing, and captioning of images will occur later.

2014/10/09 (R) GLCC Surplus and Salvage

I went over for coffee around 8 AM without eating breakfast first.  By 9 AM plans had been made for car pools to visit the various RV surplus and salvage businesses in the area.  I went back to the coach and had a grapefruit for breakfast and then spent the morning taking care of e-mail and uploading blog posts starting with September 19th.

By noon I was tired of staring at my computer so I turned my attention to the speedometer.  After removing the dashboard cover I figured out a socket and ratchet combination that allowed me to remove the two Nylok nuts from the back of the instrument.  With the retaining bracket removed the old instrument slipped out the front of the dashboard.

Rear view of new VDO speedometer with custom adaptor cables.

Rear view of new VDO speedometer with custom adaptor cables.

I needed to redo the wiring so I got out my electrical tools.  I also tested to voltage to verify that the lighting circuit was 24VDC.  It was, and the actual instrument runs on either 12 or 24, so it didn’t care.  The existing connectors for the old instrument appeared to be the same 4-pin flat connectors used in personal computers for providing power to hard disk drives, CD drives, and other peripheral components.  I checked online and found that Michiana PC was located behind Menard’s a short distance away on the other side of the toll road.  I got an adapter cable with the proper connectors on it and then stopped at Menard’s for two different spade connectors.  As long as I was out driving around I stopped at Phoenix Paint to pick up coupons for Marco’s Pizza.  Since I had to drive past Martin’s on the way back to the campground I stopped and bought groceries.

The new VDO speedmeter temporarily connected.

The new VDO speedmeter temporarily connected.

Back at the coach I put the groceries away and got back to work on the speedometer project.  I cut leads from the old instrument light wiring as I needed the plug.  I then cut the unneeded end off the computer power cable.  I wired the lighting connector, spade connectors, and jumpers.  I then wired the instrument connector spade lugs to the computer power cable.  When all the wiring preparation was done I attached all of the wires except the two for the signal (#16 & #20) and connected the cables to mating chassis connectors.  I temporarily set the speedometer in dashboard hole, turn the chassis batteries on, and then turned the light switch on for the dashboard lights.  The speedometer lights worked, so I turned the ignition to ‘ON’ without starting the engine.  The gauge needle swept up to max and back to zero and the odo displayed 0.0.

I turned the ignition off and disconnected the chassis batteries.  I then pulled the instrument out of the dashboard and disconnected the two cables.  I got the H3-40 Service Manual out and figured out which wire was the + signal (#16) and which one was the ground (#20).  With the cables protruding through the mounting hole from the rear I pushed the spade terminals fully on and reconnected the cables.  It was getting to be late afternoon by this point and I decided to leave the finally assembly for tomorrow.

The new VDO speedometer (above & right of center).

The new VDO speedometer (above & right of center).

I took a shower and shaved and had plenty of hot water as the Aqua-Hot continued to cycle automatically.  I prepared an Annie’s Kung Pao noodle bowl for dinner and took it over to the meeting room at 6 PM.  I stayed there until 8 PM enjoying bus chat with a small group of chapter members that I know well.

The new VDO speedometer installed in the old hole.

The new VDO speedometer installed in the old hole.

Several members developed problems with their BCM subscriptions over the summer.  Pat Lintner gave me a flash drive so I could provide him with the issues he did not receive.  I took care of that back at the coach and then continued to upload blog posts and respond to e-mails.  I was two days behind on writing blog posts and stayed up until I was caught up which made for a very late night.

2014/10/10 (F) Bus Business

I was up way too late last night catching up on writing drafts of blog posts for the last few days.  Linda sent a text message this morning at 6 AM that I read at 7:30 AM letting me know that she was starting the drive to Elkhart.  I went over to the meeting room at 8 AM to have coffee and Linda showed up at 9 AM.  We visited with the other rally attendees until 10 AM and then went back to our coach to have granola for breakfast.

L-to-R: GLCC secretary Tami Bruner, Newsletter editor Scott Bruner, and Treasurer Linda Fay.

L-to-R: GLCC secretary Tami Bruner, Newsletter editor Scott Bruner, and Treasurer Linda Fay.

At 10:30 AM we drove to Phoenix Paint to deliver some additional copies of Bus Conversion Magazine to Michele and visited with her and Roxanne for a while.  Josh was supposed to come look at our coach in the afternoon but had to make an unexpected trip to Chicago.  Michele called him and got him rescheduled for tomorrow morning between 9 AM and noon.

Before returning to the campground we stopped at Martin’s supermarket for salad toppings and Radio Shack for a miniature “grain of wheat” light bulb.  Radio Shack did not appear to have the bulb I was looking for, but I learned later in the day from Butch that the bulb I need comes with two bare wire leads that fold over to form the contacts.

GLCC members gathered for the Friday evening dinner and business meeting.

GLCC members gathered for the Friday evening dinner and business meeting.

When we got back to the coach we were going to have lunch but I got busy giving a tour of our bus tour and then touring the late 1990’s MCI 102D Vantare conversion parked next to us.  Butch and Fonda arrived (in their car) while all of that was going on.  We visited for a while and then they took off for Bontrager’s RV Surplus store.

Many of the GLCC members were away shopping for surplus bargains so we hung around our coach where I worked at my computer and Linda read until she got tired and laid down briefly.  I was thinking about lying down too when Pat Lintner stopped by and then Butch/Fonda returned.  Before we knew what had happened to the afternoon it was getting to be dinner time.  Linda made our dinner salads and we went over to the meeting room a little before 6 PM where we enjoyed our salads in the company of our friends.  President Larry Baker conducted a brief business meeting at the conclusion of which Linda was elected to another 2-year term as chapter Treasurer and I was elected to a 2-year term as chapter President.  Dean Chipman was elected chapter Vice-President and Tami Bruner was elected chapter Secretary.  Pat Lintner stayed on as National Director and Frank Griswold as Alternate National Director.

L-to-R: GLCC National Director Pat Lintner talks to newly elected President Bruce Fay and members Charles Martin and Ed Roelle.

L-to-R: GLCC National Director Pat Lintner talks to newly elected President Bruce Fay and members Charles Martin and Ed Roelle.

Butch and Fonda had to get back to their home to tend to their dogs and left shortly after the voting was concluded.  We visited for quite a while with the chapter members before returning to our coach for the evening where we had a glass of wine and went to bed.

2014/10/11 (S) Transfers

The day dawned clear and cold with the morning low temperature in Elkhart at 32 degrees F and frost on the ground and vehicles.  We went over for coffee at 8 AM and chatted with fellow chapter members while they had breakfast.  Josh was supposed to come look at our coach between 9AM and noon but called to see if late afternoon would be OK.  It was fine with me and he agreed to call before he came over.

We returned to our coach and had granola for breakfast.  We spent the morning chatting with folks, including the Thornton’s, who stopped by to pay their dues.  We had transferred some things to Linda’s car yesterday and transferred some more things this morning.  By noon Linda was packed and ready to leave for home.  She texted me later to let me know she had stopped in Ann Arbor to visit family and shop at Whole Foods Market before getting back to our house.

Ed Roelle and Marty Caverly came to our coach to listen to our Aqua-Hot.  Ed agreed that it should not be producing any visible exhaust after initial startup and thought a likely cause was worn bearings in the blower shaft causing reduced rpm which resulted in reduced air flow which resulted in a rich fuel/air mixture.  Ed and Marty both thought the unit sounded normal for a unit with worn bearings.

After looking at the Aqua-Hot I found former chapter President Larry Baker at his coach and we transferred quite a lot of “presidential stuff” to my car.  He had been collecting and transporting this “stuff” for the last six years and was all too eager to be rid of it.

Josh called at 3:45 PM to let me know he would be at my coach around 4:45 PM.  I made a quick run to Radio Shack to check again for the “grain of wheat” 12 VDC bulb, but they did not have it in stock.  Josh arrived a little before 5 PM and we discussed our desired interior renovation for over an hour during which time he also took measurements.  By the time we wrapped up our discussion most of the rally attendees had left for dinner at a local restaurant.  I called Linda and then had dinner in the coach; a simple green salad, a roll with garlic vegan butter spread, and grapes.

I decided to top off our fresh water tank while there was still some daylight rather than doing it in the morning when it was forecast to be cold.  After the tank was full I shut off the water, disconnected and drained the hoses, and stowed them in our fresh water tub.  I removed and stowed the pressure regulator and water softener.  I then turned each of the three Aqua-Hot loops on, one at a time, to see if I could figure out which circuit included the heat exchangers in the water bay and front storage bay.  As best I could determine, the bays are plumbed into the bedroom circuit.  I would have preferred to have them plumbed in with the bathroom as we like the bedroom cool for sleeping but want to be able to keep the bays warm enough to avoid freezing.

Scott Bruner and his dad, Richard, were out so I chatted with them about the Aqua-Hot.  The Marin’s had a propane camp fire going at their rig next to ours so we went over there to talk for a while.  I finally got cold and went in for the night around 9:45 PM.  I uploaded the blog posts for the last three days of September and then went to bed and worked on this one.

2014/10/12 (N) Arduino SBC

I got up around 7 AM, got dressed, and spent an hour packing clothes, computers, and other things that would eventually be transferred to the car for the trip home.  I went to the meeting room at 8 AM to have one cup of coffee and socialize with the GLCC chapter members who had come over for breakfast.  There are special names for breakfast on the last morning of a rally.  The one I like best is “hitch up breakfast.”  Whether you have a motorhome towing a car or a car/truck pulling a trailer, most RVers have something that has to be hitched up for towing before they can depart.  It is also a distant but quaint reference to hitching up a team of horses to a wagon; the original RV having one to six horsepower.

I do not normally have coffee or breakfast on days when I have to drive the bus, but the bus driving portion of my day was only going to be two hours and I would not be pulling out until sometime between 10 and 11 AM.  Those who wanted to eat breakfast were done by 9 AM and a crew of women busied themselves cleaning the kitchen and re-packing the supplies.  Some of those supplies were destined for my car which was already connected to the back of our bus, so everything got loaded into Pat and Vicky Lintner’s car and they brought it over to my site and I transferred it to my vehicle.

I dumped the waste water holding tanks and stowed the drain hose.  By 9:45 AM I was packed and had the bus and car ready to travel except for a few last minute details.  I joined a small group of guys for some final conversation as several coaches pulled out.  I was in a site directly behind Scott and Tami Bruner and although I could have left before them it was going to be a lot easier to wait until they pulled out, which they did shortly after 10 AM.

I went through the final steps of preparing the car to be towed, turned the coach chassis batteries on, turned the shore power off, disconnected the shore power line, and stowed it.  I had opened all the air valves earlier, so I secured all of the bay’s, locked the entrance door (from the inside), and started the engine.  While it was building air pressure for the suspension and brakes I called Linda at 10:29 AM to let her know I would be underway shortly and then called Butch.  I did not get an answer at Butch and Fonda’s house so I called Butch on his cell phone.  He had misunderstood my travel timing and indicated that they might not be home yet when I arrived at their place.

I pulled out of my site at 10:30 AM and reversed the route I had taken on Wednesday, going east on CR-4 (IN) to SR-16 (IN) north, to Old M-204 (MI) eastbound to US-12 (MI) east to M-217 (MI) south (the Michiana Parkway), which became CR-17 (IN) southbound.  I left CR-17 and got on westbound US-20 over to US-31 south which I stayed on all the way to SR-16 west towards Twelve Mile.  I had a call from Pat Lintner while I was driving regarding the dates for the 2015 Surplus and Salvage rally which will be in mid-September.

I arrived in Twelve Mile at 12:15 PM.  I got the car detached and moved it out of the way.  While I was doing that Fonda got home from church.  After tending to their two dogs (Rascal and Daffy) she helped me back the bus across the street into its parking spot next to their bus.  I plugged in the shore power cord to get AC power to the house systems but left the bus systems on temporarily so I could reprogram the new VDO speedometer.

On the drive from Elkhart the speedometer, which had not been calibrated, was indicating just under 8 MPH when I was traveling 60 MPH according to my GPS.  That meant the signal from the Allison ATEC transmission computer was putting out fewer pulses per mile than the default speedometer program.  For some reason I thought the default might be 200,000 PPM so I computed the ratio between actual and indicated speed and divided  200,000 by that number which gave me 26,316.  I programmed that in using the PULSE mode but would not be able to test it until later in the week.  If the indicated speed is in the ballpark I will use the ADJUST mode to manually move the pointer to indicate the same speed as the GPS.  There is also a CALIBRATE mode that counts the pulses over a one mile distance and then programs that into the instrument.  That is the most accurate way to calibrate the speedometer/odometer if you have someplace safe to do it with accurate mile markers.

With that done, I turned off the chassis batteries and the unneeded air circuits in the front bay but left the valve for the engine air accessories turned on.  I typically do this when I leave it with someone in case they have to start it.  I turned the Aqua-Hot electric heating element on and turned on the bedroom thermostat but set the temperature to a cooler setting.  The heat exchangers in the water bay and front storage bay appear to be tied-in with the bedroom heat exchanger.

I transferred stuff from the coach to car the car and by 1:25 PM I was ready to roll, but Butch called and said he was almost back to the house so I waited for him.  He had made progress on the Wiremold in the bus kitchen and wanted me to see it.  He had also bought a 125 A main lug electrical panel so we discussed the mounting and installation, part of which I will probably work on later this week.  He had also received the ITR Oasis Combi unit, so I had to see that too.  Fonda built a 3-D cardboard mockup and Butch had it sitting in the water bay where he plans to install the Combi.  We will probably do more work on their bus than on ours over the next two weeks, but that’s OK; their bus has more/critical projects at this point than ours and he has helped me a lot with our projects.

I pulled out at 2:05 PM and decided to take a slightly different route home:  SR-16 east, US-31 north, US-6 east, I-69 north, M-60 east, I-94 east, M-14 east, US-23 north, M-36 (Nine Mile Road) east, Pontiac Trail north, to Dorothy Street and the SLAARC monthly meeting at the South Lyon Witch’s Hat Depot.  I do not usually take US-6 across Indiana although it is a fine road known as the Grand Army of the Republic Highway.  It is flatter than US-20 with more towns and associated lower speed limits and stop lights, but it was a nice drive with different scenery.

I arrived at the SLAARC meeting at 7 PM.  The business meeting was already concluded and Mike (W8XH) was setting up for his program on the Arduino SBC (single board computer).  He bought the experimenters kit and had been playing with it enough to discuss it with the group.  Larry (K8UT) discussed the four projects he has built using the Raspberry Pi platform and passed around some of the hardware.

It was 9 PM by the time I finally got to our house.  Linda helped me completely unload the car as I had an 8:30 AM service appointment at Brighton Honda and she was leaving before 6 AM for the bakery.  She had fixed some strawberries for me and they made a nice treat after a long day of snacking on vegan junk food while driving.  I worked for a while on this post before turning in for the night.

2014/10/13 (M) Grain Of Wheat

Linda was up early and out the door at 5:45 AM.  I got up a little after 7 AM, started a load of laundry, had a couple of homemade muffins, and got ready to take my car to Brighton Honda for its 90,000 mile service.  I got coffee at the Dunkin Donuts across the street from the dealership first and waited in the lounge working on yesterday’s blog post while they worked on my car.

I forgot to specify synthetic oil so the put in regular oil.  When the car was done I headed to Novi and immediately noticed a front-end shimmy that was not there when I dropped it off.  They had rotated the tires and may not have re-torqued the lug nuts correctly.  It also pulled to left, which might be a tire inflation issue.  I did not have time to take it back so I will see if it settles out on the drive to Indiana tomorrow.  If not, I will need to get at least the front tires/wheels loosened and retightened, and perhaps balanced.  Worst case I will have to get the front end aligned.

I found the FedEx/Kinko’s on Grand River Avenue just east of Novi Road and made 10 copies each of two 24″x36″ electrical diagrams; one for the DDEC I ECM (Engine Control Module) and one for the Allison 700 Series ATEC (Automatic Transmission Electronic Control).  I folded up an ATEC diagram for me and one for Chuck and rolled up the other eight and put them in a tube for safe keeping.  Chuck and I have DDEC II’s controlling our main engines so I rolled the 10 DDEC I diagrams up and put them in a second tube to protect them.  By the time I was done it was 10:45 AM and Chuck was at his shop just up the street so I drove there.

He had installed a dual battery maintainer and wanted me to see it.  He mounted it on the back wall of the small bay above the passenger side drive tire of their bus which got it close enough to the chassis batteries (in a tray above the tag tire) for the built-in charging cables to reach the correct battery terminals.  He was still pondering where to tie in the AC power source so we discussed some alternatives.  He had also put the red covers on the bulbs in his new VDO speedometer so I got to see that.  Ours are white for now but most of the dash lighting is green.  The red makes the speedo stand out, but if I change ours from white it will likely be to green.  Chuck had a supply of spare 12VDC, 1.2W “grain of wheat” light bulbs that are used in our illuminated switches and let me have four.  Our Aqua-Hot switch does not currently light up when it is turned on.

After checking out his projects we went to the Panera at Grand River Avenue and Novi Road for lunch.  We had a good chat and solved all of the world’s problems so he went back to the shop to find some new ones and I went home to take care of chores.  I continued doing laundry and worked on the SLAARC WordPress website setting up user accounts for several new club members.

Linda got home around 5:30 PM and got busy making dinner.  She started with a nice salad featuring a ginger dressing.  Dinner was 45 minutes later; a baked potato with Brussels sprouts on the side, a glass of Leelanau Cellars Winter White with Peach wine, and grapes for dessert.  She worked on something for Butch while the potatoes baked and I worked on e-mail.

We were both tired after dinner but took some time to sort and fold the laundry from which I selected and packed the clothes I will need for the next 10 days.  We were tired and turned in after that.  I had received an e-mail from Butch with seven photos attached of the place we are considering staying in Quartzite, AZ.  It took us a while, but we eventually matched them up with the correct lot on the Google Maps satellite view.  It is not the corner lot as Butch and I previously thought, but the 3rd lot north of Kenoyer on the east side of N Lollipop Lane.  With that issue resolved we turned out the lights and went to sleep.

2014/10/14 (T) A Crowning Achievement

Linda was up at 5:15 AM again and out the door on the way to the bakery at 5:45 AM.  At this hour of the morning she has clear sailing all the way to Hamtramck which is much less stressful than the parking lot that develops on I-96 inbound just a short time later.  I was up at 7:15 AM, showered, and started gathering and organizing all of the stuff that I had to load into the car for the trip back to Indiana.

Keith showed up at 9 AM to cut the grass as I was loading my car.  He was rained out yesterday and today was not looking too good either but he figured he would have a go at it.  I wrote out his check and paid him in advance as I would be gone long before he finished.  I had time for a cup of green tea and pulled out of my driveway at 9:30 AM.

My first destination was Gusfa Dental in Dearborn, Michigan where I had an 11 AM appointment.  Dr. Steve and his assistant, Margaret, installed my new permanent ceramic crown on the upper right tooth that had a root canal procedure in mid-September.  The crown fit almost perfectly and only required a little modification on the surfaces that abut the two teeth immediately adjacent.  The bite was just right.  Gusfa Dental is definitely not the cheapest clinic around, but the work is top notch and they have been our dentists for almost 40 years.

I was done and out the door at 11:20 AM and headed directly for Twelve Mile, Indiana.  The drive was wet but uneventful.  Given my starting point in Dearborn I changed my route yet again, this time taking I-94 west to M-60 southwest to I-69 south to the I-80/90 Indiana Toll Road west to exit 92 at SR-19 (IN) in Elkhart.  From there I headed south on SR-19 and wound my way slowly through Elkhart until I picked up US-20 westbound on the south side of Elkhart.  From US-20 I picked up US-31 south and exited at IN-25 south of Rochester, Indiana where I bought some groceries at the Kroger store.  I texted Linda and then called Butch.  As I was getting ready to head south on IN-25 I got a call from Michele Henry of Phoenix Paint with some questions about the Zip Dee awnings we had installed on our coach after she finished painting it.  I took IN-25 as far south as Fulton and turned east onto a small farm road that took me to Meridian then south to SR-16 and east to Twelve Mile.

While driving down Meridian I saw one of the most intense and perfect rainbows I have ever experienced.  It was deeply colored, very clear, and an entire semicircle was visible.  A second rainbow, fainter and partial, formed above the first one on the right (south) end.  The sky was very dark to the east with bright, low sun from the west.  The trees were blazing with color, intensified by the rains, and white farm houses glistened as if they had just been freshly painted.  It was spectacular but I was not able to get a photo of it.  I arrived in Twelve Mile at 5 PM and immediately unloaded and stored my groceries.  I then brought my clothes and technology items into the house and put them in the guest bedroom where I stay when I am here.

Butch needed some parts for various bus projects so I drove us to Home Depot in Logansport.  One the drive in he got a call from his brother Tom.  He had a problem with his air compressor and wanted Butch to look at it so we went there after our stop at Home Depot, with a stop at the local Mobil station so I could fill the fuel tank in my car.  Butch quickly made a tentative diagnosis of the compressor problem as the starting capacitor and/or switch.  Tom and Butch did some pondering about details of Tom’s project in which he is converting the front half of a Crosley sedan into a trailer.

We visited for a while back at the house and looked up the grain of wheat bulb I needed for the illuminated switches in the H3-40.  Napa Auto Parts shows it in their automotive lighting catalog as a #37, 12 VDC, 1.26 W, wedge based.  Butch looked online and found a place (Bulbtown) that sells them for $0.42 each.  Orders over $50 get free shipping and handling so we discussed doing a bulb inventory of each bus and then pooling our orders.

I spent a few minutes showing Butch how the photos that Joe sent of the lot in Quartzite matched up with the Google Maps/Earth satellite and Streetview images.  By the time we were done with that it was late and we all turned in for the night.

2014/10/15 (W) MC-9 AC Wiring

Cockpit house systems switch panel.

Cockpit house systems switch panel.

Butch bought a brass nipple (NPT) last night to thread into the fitting on his fresh water tank but the fit was still too loose.  He needed the nipple in order to put the fresh water tank back in the bus.  Between that and the really soupy 54 degree F weather it was obvious that today was not going to be an outside work day.  I suggested that we work on the AC wiring on their bus instead—a nice inside project—after breakfast.

House electrical closet in Butch & Fonda's MC-9 before rewiring.

House electrical closet in Butch & Fonda’s MC-9 before rewiring.

I had homemade granola with fresh blueberries and soy milk, a glass of orange juice, and two cups of Seattle Blend 1/2 decaf coffee.  While the coffee was brewing I unscrewed the switch panel with the Aqua-Hot switch and replaced the “grain of wheat” bulbs in the Aqua-Hot switch and the Engine Preheat switch.  We then got to work on the AC (house) wiring for their bus conversion.

New 20-slot AC panel for inverter circuits.

New 20-slot AC panel for inverter circuits.

The bus had three small main lug load centers, with six circuit breakers each, mounted in a future closet in the bedroom.  We ran an extension cord through the passenger side rear slider window to power a work light, disconnected the shoreline, and switched off the inverter.  I then removed the three panels one at a time, labeling each cable as I pulled it out.  With all of the old panels out we mounted the new 20-position panel box for use with the inverter circuit.  I spent the rest of the work day, except for a lunch break, pulling old and new electrical cable into the new box and making the connections to the ground bar, neutral bus, and the GFCI circuit breakers for all of the circuits that will be fed by the inverter.  We tied in the main AC power to the inverter AC input and checked that all of the circuits worked as planned, which they did.  I will mount two of the smaller boxes tomorrow and pull the cables for the shorepower/generator only circuits into those boxes.

We quit working for the day at 7:30 PM and I washed up before making my dinner.  I had a nice salad with “power greens” and various toppings and leftover Koshary.  Yum.  I drew a glass of Moscato, did the dishes, and went back to the house.  I had a text and an e-mail from Linda so I replied to those.  We were all tired and turned in a little after 9 PM.

 

2014/09/19 (F) Renewed Acquaintance

Leave a reply

After I installed iOS8 on my iPad2 yesterday morning my Logitech Bluetooth keyboard seemed to change its behavior, giving me double letters in some cases and feeling a little sluggish in its response.  The keyboard itself has not changed, so I presume this has something to do with iOS8.  I also presume the keyboard batteries have not run down already, but I suppose that is a possibility.  If so, I will be replacing them once a week.  While creating an image gallery for the SLAARC WordPress website last night I noticed that the drag and drop feature of the gallery editor did not work.  I upgraded to WP Version 4.0 about a week ago but this was the first time I had tried to use the gallery feature.  If there is a problem with this feature there is no way that I am the first person to discover it and I presume WordPress is aware of it.  I find it strange, however, that they have not released a maintenance update fixing it since an improved and more visual editor was a major feature of the 4.0 release.

A few weeks back I re-established contact through Linked-In with a colleague from 10 years ago.  Jim was Director of General Education Services at Livingston Educational Service Agency at the time and we went through NCA Ambassador training together.  It turns out that he lives and works in the Brighton area, so we are now neighbors of sorts.  He suggested we meet up for coffee and I finally called him this morning to arrange that.  We both had time at 1:30 PM today and agreed to meet at the Panera on Grand River Avenue by I-96 at that time.

Linda got the new Global Bake bakery software installed on her laptop yesterday so this morning she was able to start working on the software conversion process in earnest.  Her work requires a lot of concentration, and she gets very focused when doing it, so I went to my office to continue working on editing blog posts and photos.

In checking my e-mail I noticed that I was still getting failed login attempts from foreign countries on this site and on the FMCA GLCC website, which is sub-domain of this site, in spite having installed the premium (paid) version of the Wordfence Security plug-in.  I looked at the installed plug-ins for the GLCC website and discovered that I had one named “Limit Login Attempts” that I did not have installed on our personal website or the other two sites I manage.  I surmised that this plug-in might be doing just what the name implied and in the process preempting Wordfence from ever doing its job.  I deactivated it and saw a reduction in failed attempts, with none from outside North America, suggesting that the country blocking feature of Wordfence was now working properly.  I saw a similar drop in failed login attempts on our personal website when I activated the country blocking feature for all countries except the U.S., Canada, and Mexico.  Only time will tell, however, if Wordfence is indeed blocking login attempts from outside North America.

We had hummus and apples for lunch after which I hung up one load of laundry and put another load in the washer.  I left at 1 PM to have time to stop at Best Buy to get something to clean our various touch screens and monitors.  Traffic was very heavy in the I-96 and Grand River Avenue shopping area, but Best Buy is in the same shopping complex as the Panera, so I made it there on time.  Jim and I talked for almost two hours and which covered the highlights of the last eight years.

Back home I kept my focus on getting the blog caught up.  Linda wrapped up her work for the day and we finished the bottle of Alpha Rose from Red Trail Vineyards while she fixed a simple but tasty dinner of vegan burgers and corn.  I got a call from Butch letting me know that the company in Nevada had arranged for a semi and taken all of the parts they plan to take.  Everything that is left is Butch and Fonda’s to do with as they please.  The important thing for us is that I can now take our bus down there at my convenience.  I would like to get all of the natural gas related work taken care of and put the finishing touches on the garage project before I move the bus, but I may go ahead and move it next week if the scheduling of contractors works out.

During the evening I had an exchange of TXT messages with Chuck.  He had ordered some miniature 24VDC light bulbs (1829s) that are used in our bus dashboards and the order had arrived.  Rather than go to his shop after breakfast tomorrow we arranged to meet him for dinner tomorrow night.  I also got a call from Michele Henry of Phoenix Paint.  She had a new customer who just bought a mid-1990’s Prevost XL converted coach and she gave him my name and phone numbers in case he had any questions about the rig.  We agreed that we would try to find time during the GLCC Surplus and Salvage a Rally to work on the article I started last year about the process she used to repair the body and roof of our coach, seal and coat the roof, and paint the body.  We capped off the evening with the second to last episode of Season 5 of Doc Martin. We need to return the DVDs to the Howell Library on Sunday, so we want to make sure we get through all of the episodes for Season 5.

 

2014/09/02 (T) No More Painting

Leave a reply

After breakfast Linda worked on the financial and membership records for our GLCC RV chapter and I took care of a couple of e-mails.  Keith showed up to cut the grass, which he managed to do in spite of the wet conditions from yesterday’s heavy rains.  After chatting with Keith for a few minutes I started to resume work on “the project” but decided to look for the tub of grass seed and fertilizer we brought from the old house.  I found it rather quickly and we still had a partial bag of grass seed, so I spread it around the front yard by hand filling in the bare and thin spots, of which there were plenty.  Our flock of wild turkeys was back today.  I think they like the grass seed I put out for them.

Wild turkeys gather in and around the fire pit. No...we do plan to cook them.

Wild turkeys gather in and around the fire pit. No…we do not plan to cook them.

I sanded the drywall compound in the library and applied another thin layer.  I’ve been applying non-overlapping horizontal strips of mud, letting them dry, sanding them smooth while feathering the edges, then repeating the process for the areas in-between, or outside, the previous strips.  I will eventually turn this 90 degrees and apply the strips vertically.  The last set of steps will be to fill around the outside of the opening, feathering everything back to the existing wall surface and sanding it smooth with the central part of the patch.  We don’t want it to be obvious that there was ever a hole in the wall.  Once the drywall patching is done I have to prime the new compound and then paint the entire wall.

The paint on the east wall of the garage and the outside of the utility closet looked good and the paint on the inside of the utility closet looked good enough; it is, after all, the inside of a furnace closet.  I was done painting, at least for now, which should have felt like a big deal, but it just meant I could wrap up a couple of things and move on to the next thing.

The first thing was to mount the electrical box on the wall to the left of the library HVAC unit, make all the wiring connections, screw the switch into the box, and put on the cover plate.  I routed the thermostat wire alongside, and zip-tied it to, the armored AC power cable.  The second thing was preparing the mounting holes for the garage furnace thermostat on the outside of the utility closet wall.  I then cut the thermostat cable to the correct length beyond the wall, removed the outer sheath, stripped the ends of the wires, and secured the cable with a zip tie to prevent it from slipping back into the wall.  I did not actually mount the thermostat, however, since I was going to wait for Darryll to connect the wires.

Three adults and three young. They are large and impressive birds.

Three adults and three young. They are large and impressive birds.

By then it was time for lunch, after which Linda left for her dentist appointment in Dearborn.  I wanted something easy to do, so I assembled the three plastic shelving units I bought at Lowe’s yesterday.  They went together easily, but one was missing the feet, top caps, and wall brackets and another one had a defective top cap.  I put them against the east wall of the garage and the floor was flat enough that they lined up well, so I don’t necessarily need the feet.  But the top caps are important, and it bugs me that I did not get everything I paid for.

The next thing I decided to tackle was the wood box in the utility closet that will enclose the electrical sub-panel and make it appear to be recessed and hide all of the electrical cables.  I cleared off the table we have been using to work on sheets of drywall and stood the scrap pieces of drywall against the back wall.  I got the two 8-foot 1×10’s I bought yesterday, put them on the table, made careful measurements and then marked them.  The two side pieces needed to be 52″ long x 7-1/4″ wide, with notches to create clearance for the top plate, horizontal blocking, and electrical cables passing through holes in studs.  I cut them to length with the Rockwell circular saw, and then ripped them to width using the Craftsman band saw.  The band saw had not been used in years but it had no problem ripping each board.  The notches were made with our Porter-Cable saber saw.  This kind of work is a pleasure when you have the right tools.

I screwed the two side pieces into place and then measured and cut a bottom cross member, and a trim strip to go below it, and installed those with screws.  I then cut a top cross member and a backing strip to go behind it between the two side pieces.  When I was done I had a box that would support a 48″ high by 33″ wide 1/4″ thick plywood panel with the outside face flush with the front edge of the sub-panel once I cut a rectangular opening in the plywood to allow it to fit around the box.  The plywood panel will be secured around the edges with a few screws and the sub-panel cover plate will overlap and cover any gap between the panel box and the opening in the plywood.  I will finish the plywood panel tomorrow or Thursday depending on when Darryll returns and how much I have to work with him to get the power connected to the new A-C compressor.

Jasper the cat in the kitty tent on the deck. He spends a lot time looking around and sniffing the air when he is out here.

Jasper the cat in the kitty tent on the deck. He spends a lot time looking around and sniffing the air when he is out here.

That was the end of my project work for the day so I took a shower and put on some clean clothes.  Linda poured a couple glasses of wine and we sat on the deck and enjoyed an absolutely beautiful late summer Michigan evening.  We brought the kitty tent out so Jasper could sit outside with us.  Linda threw a green salad together, followed by the leftovers of the penne pasta dish and Italian bread she made for dinner on Saturday.  As twilight set in we moved inside and I decided to go to Lowe’s for some grass seed.  I figured if the soil was still moist first thing tomorrow morning I would spread it around the bare and thin areas in the back and on the west side of the garage, of which there are plenty. Otherwise I will wait until just after the next rain.

I started reading Big Lake Scandal last night and continued with it this evening.  It’s the 5th and latest book in the Big Lake murder mystery series by full-time RVer Nick Russell.  Nick is a good writer, but he and his wife, Terry, are personal acquaintances, which makes reading his books that much more fun.

 

2014/08/16 (S) Bus People

Leave a reply

We enjoy the company of our fellow “hams” (amateur radio operators) and so our first destination this morning was the Senate Coney Island in South Lyon for the weekly SLAARC breakfast.  It was a much smaller turnout than last week, but that often leads to better conversation for the lower noise level if no other reason.

Converted bus people are also our kind of people, so our second destination today was the Fireman’s Park in Clio, Michigan where the joint CCO/GLCC “Back-to-the-Bricks” rally was taking place.  There were 22 rigs in attendance, 19 of which were converted buses.  We got there around 11AM and spent the afternoon visiting with whomever was around, starting with Pat and Vickie Lintner.  Light rain moved in during the early afternoon and we had a nice visit with our friends from Ontario, Bill and Karen, in their bus.

With a few exceptions we knew all of the attendees and they all knew us, so this was a comfortable reunion with old and new friends.  We had a chance to talk to Glen Williams, who runs a clock repair business named Tenor Clocks, about our broken grandfather clock and made an appointment for him to come work on it on Wednesday at noon.  (Glen is also part of a four man singing group named “Three Men and a Tenor”.  Glen is the Tenor.)  We were most cordially invited to stay for dinner but we had not paid to attend the rally and there was very little food we could (would) eat so we left around 6 PM as the group was assembling for the evening meal.

We stopped at the Panera in Fenton on the way home and enjoyed their black bean soup and Mediterranean veggie sandwich, hold the feta cheese.  Once home we enjoyed a small glass of Late Harvest Vignoles wine from Acres of Land winery in Kentucky while we worked on our iPads a bit before bed.

 

2014/07/01 (T) July And Counting

Leave a reply

Well, here it is the 1st day of July, the beginning of another month, and things are just not getting checked off of the “to do” list as fast as I would like.  It finally felt like summer yesterday, and the heat and humidity erupted into severe thunderstorms overnight.  We had the house partially opened up when we went to bed with a couple of fans going in the bedroom, but I still heard the sirens when they were activated around 2:15 AM and I woke up enough to see the first flashes of lightning.  I got up and closed all of the open windows and then checked the weather on my iPad.

A storm front, which ran the most of the length of Michigan’s Lower Peninsula, was pushing east producing severe thunderstorms with up to 70 MPH winds and 1 inch diameter hail.  The storms pushed through our location between 2:45 and 3:15 AM.  There was plenty of lightning and thunder, and the trees whipped around quite a bit, but the rain was only moderate and I did not hear any hail.  By 3:30 AM the front had moved east of us and I was able to go back to sleep.

I would have liked to sleep in this morning, but I got up around 7:00 AM to make sure I was ready for the landscapers when they arrived between 8:00 and 8:30 AM.  They didn’t, and with the rain last night it’s anybody’s guess if/when they will arrive.  We moved the bus yesterday evening in anticipation of the landscapers being here early.  It was also very warm yesterday, which was easier on the engine when starting it.  I had not started the bus since we got back from the GLAMARAMA rally and with the humid conditions of the last couple weeks the auxiliary air tank had a LOT of water in it.  After I backed it up, with Linda acting as spotter, I lowered the suspension all the way down and turned off the auxiliary air compressor.  I will leave it off until I get the aux air water separator/filter replaced.  That’s one of the projects that is not getting checked off of my list as I am waiting for the landscaping to be done first.  Why?  Because once I open the air lines the bus cannot be moved until I get everything put back together.  No air, no brakes and no suspension.

I uploaded the blog posts for the last three days including a gallery post of the photos from Saturday.  I then spent some time researching alternative ways to display photos in a WordPress website/blog.  The native Gallery feature of WordPress is very easy to use, but is not very sophisticated when it comes to viewing the images.  The WordPress Jetpack includes a Carousel feature that sounded like it might be what I need.  The Jetpack makes a large collection of features available to self-hosted WordPress sites that were previously only available to sites hosted on WordPress.com.  My hesitation with the Jetpack is that I don’t need, and do not plan to use, most of its features so it potentially complicates my control panels without corresponding benefit.

Linda went to the local Salvation Army resale store in search of a highchair to keep at the house for Madeline.  They did not have any, so she tried Walmart and Target and found one she liked at Target.  She stopped at 5th/3rd Bank to make a deposit for our FMCA Great Lakes Converted Coaches chapter (GLCC) and while she was there she set up the account so she can get online statements.  Our chapter has done its banking with 5th/3rd for a while and does not pay any fees for the account.  She inquired as to the requirements for a free account and was told that the organization had to have 501(c)3 status (IRS non-profit entity).  We were looking at the IRS 501(c)7 status for the SKP Photographers BOF, which is for “social clubs,” but we will have to set it up as a 501(c)3 if we want free checking.

The landscaping crew arrived just after lunch, followed by a truck that dumped a load of very large boulders in the yard just west of the driveway.  A little while later another truck showed up and unloaded the nine pre-cast concrete steps for the front stairs.  They are 46″ W x 19″ D x 7″ thick and very heavy.  Steve showed up a little while later with his excavator, a Kobelco sk35sr-3.  He unloaded it and drove it around back to do some excavating.  He then used it to select some of the largest boulders and place them on the trailer so he could haul them to the back.  He used the excavator to unload them and roll them down the hill to where he needed them.  Steve needed the excavator on another job so he loaded it back on the trailer and left.  He came back at 9:20 PM, unloaded the excavator and used it to place a few very large boulders onto the lower shelves on either side of the walkout.  He quit at 11 PM and left the machine here so he could get an early start tomorrow morning and continue placing boulders so his crew would have work they could do when they showed up.

Pre-cast concrete steps for front porch.

Pre-cast concrete steps for front porch.

Boulders for the retaining walls behind the house.

Boulders for the retaining walls behind the house.

2014/06/15 Family Time

Leave a reply

We were parked in a fenced compound area next to the regular “campground” at the Elkhart County 4-H Fairgrounds.  The campground has gravel sites with 50A full hookups, and we were allowed/encouraged to use the sewer connections to dump our holding tanks before departing this morning.  We had checked out the campground last night and decided that it would be easier for us to pull around to the dump stations on the outer road than to maneuver into and out of one of the open campground sites, all of which were back-ins.

I have mentioned before what a nice facility this is.  Several of our GLCC members are from north central Indiana and explained to us that the fairground is as nice as it is because it is booked every week for most of the year, winter being the exception.  Elkhart is considered the center of the RV industry in the U.S., but the reality is that RV-related industry is located throughout north central Indiana, and a little bit of southern Michigan, with a few facilities in other parts of Indiana and Ohio.  There is also significant RV industry in California, Oregon, and Florida, and to a lesser extent in Pennsylvania and Alabama.  By “RV Industry” I am referring to manufacturing, not RV parks, resorts and campgrounds, or RV dealers and service facilities, which are obviously located all over the place.

We skipped breakfast and coffee, as we always do on travel days.  Linda prepared the inside for travel and then we visited for a while with our GLCC friends.  Around 9:00 AM I unplugged the electrical power, stowed the cord, turned on the chassis batteries, opened the air valve for the engine accessories, and fired up the engine.  I did not have any trouble getting out of our parking spot or the compound.  I drove over to the dump station, which can accommodate nine RVs at one time, and Linda followed in the car.  While the holding tanks were emptying we hooked up the car for towing.  With everything stowed and secured for travel we checked the toad controls and lights and were on our way, exiting the fairgrounds at 9:25 AM.

We followed the same route home that we used when we left the Escapade rally a month ago: CR-34 (Monroe St.) east to CR-29 north to IN-4 east to IN-13 north to US-20 east to I-69 north to I-96 east to M-59 east and finally a couple of miles of dirt roads to our house.  We stopped at the Travel America (T/A) truck stop on M-60 at I-69 to put biocide and Stanadyne diesel additive in the tank along with 75 gallons of diesel fuel.

We had just over 1/4 tank of fuel indicated on the fuel gauge when we pulled in to the T/A.  If the gauge is anywhere near accurate that was approximately 50 gallons of fuel, enough to travel another 200 miles and still have 15 – 20 gallons in the tank; more than enough to get us to the Mobil truck stop on I-96 about 25 miles before our house.  I wanted to use as much of the fuel in the tank as I could before adding more but did not want to risk running out or sucking sediment off the bottom and clogging the fuel filters.  In the end we decided it was safer to stop and add fuel while we still had the 1/4 tank.  The 75 gallons brought the fuel gauge up to 5/8ths, which is what I expected.  The fuel tank capacity is 235 gallons, but I assume the full mark on the gauge corresponds to 200 gallons.  That makes every 1/8 of a tank on the gauge correspond to 25 gallons.  We also presume that our average fuel economy, based on prior data, is 6 MPG which equates to 150 miles per 1/8 tank.

We did not fill the tank because the bus is going to be sitting for a while and we did not want to have all of that fuel onboard aging in the summer heat.  There is a reason, however, to keep the fuel tank as full as possible.  Most of the fuel that is pumped to the engine is used to cool the injectors and the DDEC engine computer and returned to the tank. The more fuel in the tank, the less frequently any particular molecule passes through the engine giving the fuel in the tank more time to dissipate the heat.

Our trip was easy and un-eventful other than the powered driver-side windshield shade quite working.  Add that to the list.  We got home by 1:30 PM which gave us time to unload food and a few essentials from the bus and take showers.  Since Linda spent Saturday morning preparing food, she only had minimal cooking to do for dinner.  Our son, daughter-in-law, and grand-daughter arrived at 3:30 PM and our daughter and son-in-law arrived at 4:00 PM.  Madeline had a cold, wasn’t feeling well, and had only had a short nap, but she was fine as long as she was busy.  This was a combination birthday and Father’s Day gathering, but mostly an excuse to gather our small, immediate family.  We had a lovely summer meal of potato salad, collard greens cole slaw, baked beans, and cheeseburgers with chocolate cupcakes (from a local bakery) and fresh strawberries for dessert.  All vegan, and all delicious.

Brendan, Shawna, and Madeline left shortly after dinner and Meghan and Chris left around 8:00 PM.  Although our morning departure and drive home had been quite routine and the family gathering had been relaxed and relatively easy, it all added up to a long day.  I started the download of an update to my Adobe Creative Cloud subscription that looked like it was going to take a while, so we skipped watching an Episode of Doc Martin and turned in for the night.

 

2014/06/12 (R) Rallying Day 2

Leave a reply

First of all, yesterday was our daughter’s 33rd birthday.  Happy birthday, Meghan!

At most rallies “breakfast” consists of coffee and doughnuts, with a pancake and sausage meal thrown in somewhere.  We like our own coffee a lot better than what is typically served at rallies, but these breakfasts are included in our rally fee, so we go have coffee and sit and talk with folks.  Mostly it’s about sitting and talking with folks.  Larger rallies are social/educational events.  Smaller rallies tend to just be social events.

The GLAMARAMA organizers had arranged for a morning and afternoon tour of a local Dometic factory today, with tours of a local Jayco factory tomorrow.  Slots were limited, requiring an advance reservation, and a single school bus was contracted to transport each group.  We did not go, but our GLCC friends who did said it was an excellent tour of a very impressive factory.

We went through the vendor buildings when they opened at 9:00 AM and took stock of who was there and what they were selling.  We usually check out the vendors early in the rally but do not buy anything right away, giving us time to ponder possible purchases.

We did not attend any seminars today.  Most of the chapter socials were scheduled to start at 4:00 PM including our Great Lakes Converted Coaches meeting.  Linda and I were responsible for the food, most of which we had ordered from Pizza Hut on Tuesday.  At 2:15 PM we drove to the Kroger on the northwest side of Goshen to get ice, bottled water, and diet Coke.  (Pizza Hut is part of PepsiCo, so they only sell Pepsi soda products.  I do not care for Pepsi and usually forego a soda beverage if Pepsi is the only thing available.)  The food was supposed to be delivered to Gate 5 of the Fairgrounds at 3:35 PM but the driver was delayed by trains blocking his route.  (This is common in Goshen.)  He finally arrived at 3:50 PM.  We transferred all of the food to our car, paid him, and headed for the pavilion.  A few people had already arrived and they helped us unload the food and set it up on two tables.  By the time we had it ready to serve most folks had arrived and most of them were hungry.  We did not take a head count but I estimated 35 people, plus or minus.  Once everyone had a chance to eat we had a short business meeting.  By the time we were done and had everything cleaned up it was 6:30 PM.  We went back to our GLCC parking area and visited a little longer with our immediate neighbors before retire to our buses for the evening.  On the day of the chapter socials there is no evening entertainment; those who want to usually gather for cards or bingo.

 

2014/06/10 (T) Early Entry

Leave a reply

Today was early entry day for the FMCA Great Lakes Area Motorcoach Association (GLAMA) area rally, known as the GLAMARAMA.  Following our usual departure routine I dumped our holding tanks and prepared the outside of the bus for travel while Linda secured the inside.  We pulled out of Elkhart Campground around 9:30 AM and headed west on CR-4 to IN-19 where we turned north back towards Michigan.  IN-19 becomes M-205 at the border and we followed it around to US-12 east.  A few miles down the road we turned onto M-217, the Michiana Parkway, and followed that south back into Indiana where it became CR-17.  We exited CR-17 at US-20 and headed east towards Middlebury, Indiana.  The reason for going this way was to avoid driving through Elkhart and Goshen.  Monroe Street in Goshen is closed at the railroad tracks forcing detours to get to the fairgrounds when approaching from the west.  We knew from our recent visit to the Elkhart County 4-H Fairgrounds for the Escapees RV Club Escapade rally that the easy way in and out of the venue was from/to the northeast.

GLAMARAMA14 is the second rally organized by GLAMA.  The first one was in September 2013 at the Elkhart County 4-H Fairgrounds.  I wrote an extensive article about that rally that appeared in the January 2014 issue of Bus Conversion Magazine.  A version of that article also appeared in the November 2013 newsletter of the FMCA Great Lakes Converted Coaches (GLCC) Chapter.

We encountered unexpected road construction on eastbound US-20, but we had no particular time constraints and patiently worked our way through.  At IN-13, south of Middlebury, we turned south, drove down to IN-4, and headed east.  Before getting to Goshen we turned south on CR-29 and followed that to its terminus at CR-34 (Monroe Street) where we headed east a short distance to the northeast entrance to the Fairgrounds (Gate 5).  The trip took us a little over an hour whereas the direct route, without road closings, would have taken 30 minutes.  But it was an easy, stress-free drive and we arrived relaxed and ready to enjoy the rest of the day.  Northern Indiana is a particularly easy place to drive a large RV; the roads are relatively flat with very few overhead clearance or weight restriction issues.  The one thing you have to watch out for are the Amish buggies; they are everywhere in this region.

We indicated on entry that we were with the Great Lakes Converted Coaches Chapter.  After unhooking the car in the staging area the parking crew escorted us to the sites reserved for our chapter in the fenced area directly behind the vendor and entertainment buildings known as “the compound.”  We were the second bus to arrive; the Lintner’s having already been here for a few days.  A short while later Bill and Karen Gerrie (1965 GM Transit) arrived with Mike and Kathy Dickson and Joe and Mia Temples (GM 4905 “Buffalo”).  Later in the day Don and Sandra Moyer arrived in their 1948 Spartan with John and Paula Lingafelter in their 1958 Flxible Starliner.

In the early afternoon Chris Dunphy and Cherie Ve Ard (Technomadia) walked over from the FMA area to the GLCC area with Jason and Nikki Wynn (Gone with the Wynn’s).  I introduced them to Bill Gerrie and Linda joined us for a brief chat.  It’s always good to cross paths with Chris and Cherie and it was nice to meet Jason and Nikki.

We volunteered to drive golf carts during the rally and our first shift was today from 2:30 to 5:00 PM.  Although the rally does not start until tomorrow the registration office was open and attendees from all over the fairgrounds needed to go there, without knowing where “there” was, so we had our share of customers.

 

2014/06/08 (N) Positioning

Leave a reply

We were up around 7:00 AM, showered, dressed, and gathered up toiletries and other last minute items for our outing.  I did a last minute check of e-mail and RVillage and then shut down the computers, printers, and NAS units and packed up my laptop.  We started our final loading process at 9:00 AM and had everything on board by 9:20 AM.  While Linda configured the car for towing, I turned the chassis batteries on, disconnected the shorepower line, stowed the cord, checked that the inverter was operating, and opened the air valves for the engine accessories and the air line to the car auxiliary braking system.  While Linda closed up the utility bay I fired up the main engine and drained the moisture out of the auxiliary air tank.  We checked the lights and finally checked that all of the bays were closed and locked.  GPS and TPMS on with all tires reporting in, all gauges reading normal, and side mirrors adjusted.  Tag axle up for the tight 180 degree turn exiting the driveway and all ahead slow while Linda verified the car wheels were turning.  She was on board and buckled in at 9:30 AM and we were on our way.  We have gotten reasonably efficient at this departure routine, but when driving a bus with a car in tow you do not simply turn the key and drive away.

We had light rain overnight and it was still drizzling as we pulled out.  No problem; cloudy skies often make for easier travel.  We drove up to M-59 and headed west, picking up I-96 westbound on the west edge of Howell.  By the time we turned onto I-69 southbound at the southwest corner of Lansing, Michigan we had run out from under the rain and the overcast gave way to partly cloudy skies with patches of blue making for very pleasant driving conditions.  At Coldwater, Michigan we headed west on US-12, a route we have driven many times and always enjoy.  Just north of Elkhart, Indiana we exited US-12 onto M-205 which swings south and becomes SR-19 as it crosses into Indiana.  About two miles into Indiana we turned east on County Road 4 and 0.7 miles later turned into the entrance to Elkhart Campground.  It was a little before 1:00 PM and we had made the 160 mile trip without rest or fuel stops.  I set the cruise control at 60 MPH on the Interstates and 55 MPH on M-59 and US-12, but had to slow down for interchanges and lower posted speed limits going through small towns.  We usually base our expected travel time on an average speed of 50 MPH which seems to account surprisingly well for all of these variations.

We got checked in to the Elkhart Campground using our Escapees membership to save 15% off of their overpriced 50A FHU grass sites.  They put us in a new part of the campground we have not used before.  The spot was level so I but the tranny in neutral, set the parking brake, and shut the engine off.  I shut off the air and chassis batteries and hookup up the shorepower line while Linda got the inside ready to use, our standard arrival routine.  In all fairness, Elkhart Campground is not a fancy RV resort but is nice enough, and one of only two RV parks in Elkhart, Indiana, so part of what you pay for here is location.  We have been here at least 9 times, usually for Great Lakes Converted Coaches rallies.  It is centrally located for much of our membership and has a building with meeting rooms and kitchen facilities that they let us use for no additional charge.  Our reason for being here now is to add a couple of days of RV use to the GLAMARAMA rally and position ourselves for an easy, early morning entry into the Elkhart County 4-H Fairgrounds on Tuesday.

For lunch Linda served some of the cold three bean salad she made yesterday along with tofu hotdogs (with mustard, relish, and onions, of course).  After lunch we got our WiFi Ranger connected to the campground WiFi network and checked in to the campground on RVillage.  The website indicated that there were 11 other people checked in here, but we knew that some of them had been here after the recent SKP Escapade and subsequently left.  We went for a walk around the campground and found the FMCA Frustrated Maestros (Great Lakes Chapter) camped by the activities building.  It was obvious that they were having a pre-rally and using it to rehearse before heading to the GLAMARAMA rally in Goshen on Tuesday.  We recognized Ron and Meredith Walker’s Prevost XL bus conversion but did not see them outside.

As we were finishing our walk we ran into Nick Russell of The Gypsy Journal and he invited us in to their motorhome for a brief chat.  Terry was busy removing their old combo washer/dryer to make room for the new one they are supposed to get tomorrow, but she put her work aside to visit.  We finally got to see her loom which we have read about on Nick’s blog.  Considering what a sophisticated device it is, it fits surprisingly well in their Winnebago Ultimate Advantage (which has slides).  Terry was obviously very excited to have it and enjoyed describing its operation to us.  She is mostly self-taught and already producing some very intricate designs.

For dinner Linda made a nice green salad to go along side a bowl of the vegetable chili she made yesterday, served with crackers and a glass of Franzia Sweet Red wine.  We went for a walk after dinner and ended up having a conversation with several of the Frustrated Maestros, including Ted (K0DDB) who took up the banjo at age 56.  As we walked past Nick and Terry’s motorhome Terry was outside talking to Greg and Jan White.  Greg was “parting out” the combo washer/dryer that Terry had just removed from their rig to salvage as many usable spare parts as possible since they have the same model in their American Eagle coach.

We got back to our motorcoach just before 8:00 PM and tried to connect to the Technomadia live UStream videocast they were doing for the Mobile Internet Aficionados private membership Facebook group, but the WiFi at Elkhart Campground was not up to the task and I did not feel like turning on our Verizon MiFi device.  Linda turned the TV on instead and checked out the stations available to us.  We had all of the major networks and decided to watch the final episode of Cosmos and then turned in for the night.

 

2014/04/27 (N) Camp Turkeyville (MI)

Leave a reply

We had a somewhat longer drive today of 250 miles.  That is still within our comfort zone, but we did pull into a rest stop and have a bite of lunch.  Our route from Columbus Woods-N-Waters Kampground took us north on I-65 to Indianapolis, Indiana.  I-65 through Alabama, Tennessee, and Kentucky had been a fairly good road (except for the construction backup we encountered south of Louisville, Kentucky).  I-65 through southern Indiana was not as good and the condition of the road suggested that we had finally returned to the land of four seasons where a bitter winter had taken its toll on the roads.

The path from Camp Turkeyville to Cornwell's Turkeyville complex.

The path from Camp Turkeyville to Cornwell’s Turkeyville complex.

Bruce at the Turkeyville narrow gauge RR X-ing.

Bruce at the Turkeyville narrow gauge RR X-ing.

We picked up I-465 on the south side of Indy and took that around the city to the east and onto I-69 at the northeast corner.  I-69 runs northeast from Indy past Ft. Wayne, and on into the center of Michigan.  In all the years we have driven back and forth between Detroit, Michigan and St. Louis, Missouri the southern terminus of I-69 has always been the northeast corner of Indianapolis.  Not long after merging onto I-69 we noticed that the exit signs had small additional signs stating the “old” exit number.  The new exit numbers were 200 miles higher!  That seemed to indicate that I-69 now started somewhere 200 miles to the southwest. Linda did a quick Google search on her smartphone and found out that the southern terminus of I-69 is now Evansville, Indiana.  We have never been on the new stretch of this Interstate.  Until today we didn’t even know they were building it.

The Turkeyville narrow gauge RR. You can just see the two trestles from here.

The Turkeyville narrow gauge RR. You can just see the two trestles from here.

The Turkeyville General Store (gift shop).

Linda at the Turkeyville General Store (gift shop).

Our destination was Camp Turkeyville, a relatively new RV park at Cornwell’s Turkeyville complex near Marshall, Michigan.  The RV park had good gravel interior roads and sites.  We had one of the full hookup pull-through sites as we were only staying one evening, not unhooking the car, and needed to dump our waste tanks before leaving in the morning.  The sites were generous in terms of size and spacing, with angled approaches which makes getting in and out easier, but they lacked trees and shade.  Most of the sites did not appear to be level (ours wasn’t) but they were close enough that we were able to level our coach.

Turkeyville antique barn (rear, left) and signs for the various attractions.

Turkeyville antique barn (rear, left) and signs for the various attractions.

After we got set up we went for a walk and checked the place out.  Some of the sites have metered electric, so the RV park is clearly looking for some percentage of the sites to be seasonal or annual residents.  Amenities included a pool with a community building that had restrooms, private shower rooms, and a meeting room with limited kitchen facilities.  There was a small playground and a walking path to Turkeyville.  Turkeyville has a narrow gauge railroad with two trestles, a few farm animals (goats, rabbits, ponies), and a couple of dozen turkeys walking around loose.  There is an antiques barn, a restaurant, a dinner theater, and a “general store,” aka gift shop with a lot of interesting food items if you are not a vegan.  Our FMCA GLCC chapter has held rallies here the last couple of years but so far we have not been able to attend.  It looked like a good venue for a rally of 10 -15 rigs and 20 – 30 people.  The RV park will easily accommodate more rigs than that, but the meeting room would be crowded beyond 30 people.

We settled in for the evening with an eye on the weather.  The forecast called for rain and increasing winds from a storm system that was causing death and destruction across the Midwest and south.  That always makes for a good night’s sleep in an RV.  Fortunately we had a short drive the next day and did not have to leave early in the morning.