Tag Archives: Diane Rauch

2015/12/19 (S) A Gypsy Journal Milestone

We were up a bit later than usual last night and did not get out of bed until 8:15 AM this morning.  The temperature outside had dropped to 36 degrees F overnight and it was cool in the coach which was one of the reasons we slept well and lingered under the covers (where I had my heater pad turned on).  I put my sweatpants and sweatshirt under the covers to warm them up before getting up and putting them on.  Linda just braved the chill and put on her sweats without warming them first.  She’s tougher than I am.

We like to keep track of the weather back home and in other places where we have friends, like Quartzsite, AZ, and the weather apps on our iPads and smartphones make that very easy to do.  At 10 AM EST it was 25 at home going up to 28 with an overnight low of 23.  Here in Williston it was 48 going up to 62 with an overnight low of 39.  Arcadia, where we will be in January and February, was presently 58 going up to 73 and dropping to 55 overnight.  Four hours farther south actually matters in Florida, which has four somewhat distinct climate zones.  Quartzsite, 2,000 miles west of us, was 38 (at 8 AM local time) going up to 67 and dropping back to 39 overnight.  All things considered Williston was a pretty nice place to be this time of year.

Once I was up I fed the cats, who always insist that their needs are met first, and then turned on the three thermostats for the Aqua-Hot hydronic heating system, set the temperature controls, and turned on the diesel burner.  I made a pot of coffee and Linda started cooking oatmeal for our breakfast.

A view of our coach looking north at Williston Crossings RV Resort.

A view of our coach looking north at Williston Crossings RV Resort.

We were done with breakfast by 9:30 and Linda had the dishes cleaned shortly thereafter.  We doodled on our iPads while we enjoyed the rest of our coffee.  Nick Russell sent out the link for the January-February 2016 issue of The Gypsy Journal yesterday.  I forwarded it on to our iPads last night and we downloaded it to our devices this morning.  It is the 100th issue that Nick has published and the last one he will produce on newsprint.  Starting with the March-April 2016 issue the Journal will only be available in digital form.  That will not be a problem for us as we switched to the digital version only several years ago, but it is sad that smaller specialty publications cannot survive in printed form.  I think it is inevitable that Bus Conversion Magazine will also go digital only, if it survives long enough to make that switch and then survives the transition.

Nick has had a small army of friends take bundles of newspapers and leave them in RV park offices on their travels and has picked up new subscribers that way, but the newspaper is well enough positioned at this point, with a large enough subscriber base, that he should continue to do very well.  Even if the number of subscribers levels off, or even shrinks slightly, his profitability should increase nicely now that he is rid of the printing and mailing costs.

Nick and Terry will also have what we called “found time” at the education agency when some task, meeting, or other commitment on our time evaporated and we suddenly, and unexpectedly, “found” time to work on other things.  As highly mobile full-timers Nick and Terry were always arranging for printers in different parts of the country, picking up the newspapers, folding and stuffing them in envelopes, printing address labels and putting them on the envelopes, and taking them to a post office, as well as carting around the extras and leaving them in campground offices or giving them to friends to distribute.  All of that took a lot of time; time they can now use for other things.

Williston Crossings RV Resort has lovely, mature landscaping including large, majestic Live Oak trees draped in Spanish moss.

Williston Crossings RV Resort has lovely, mature landscaping including large, majestic Live Oak trees draped in Spanish moss.

Yesterday Linda was looking at the website for Big Tree RV Resort in Arcadia, Florida where we will be in January, February, and early March.  She ended up looking at the AllStays Camp and RV listing for the resort and discovered a photo of OUR bus that I took two years ago in our site here at Williston Crossings RV Resort!  The information attached to the image pointed back to our website as the source and said “…the image may be copyrighted.”  I have looked at ways to add a copyright notice to all of the images on our website/blog but never implemented one.  I guess I really should.

After breakfast we opened the packet of felt chair leg caps and put four of them on the folding card table chair we use at the desk.  It looked like they would do just what we needed them to do so we removed the towel we had been using to protect the floor.  My focus today was working on our blog but first I spent a little time updating my spreadsheet for our spring/summer 2016 water bay project.  I uploaded seven blog posts a few days ago but have been concentrating on selecting and processing photos since then.  This morning I decided to resume working on posts.  My goal was to finish editing the posts for the remainder of August (2015), select the spots to insert the selected photos, clean up the writing, and start uploading them to the server.

We took a lunch break at 12:45 PM and had mock deli slice sandwiches on flatbread and split a fresh apple.  Linda started to work on her counted cross-stitch project for grand-daughter Katie but realized the larger grid base material she bought was too small.  She found something on Amazon that would work and ordered it for delivery on Tuesday.  She then searched online for someplace in the area to buy a Tofurkey vegan mock turkey roll.  It looked like Earth Origins in Gainesville sold them so she decided to drive into town and get one rather than wait until next week and risk not having any available.  I stayed behind and continued working on my blog posts.

Some of the grass on the other side of the road from our site was spectacular.  Ahhh, December in north central Florida.  This is why people come here in the winter.

Some of the grass on the other side of the road from our site was spectacular. Ahhh, December in north central Florida. This is why people come here in the winter.

With the outside temperature only rising into the low 60’s we kept the motorcoach closed up today.  By 2 PM the temperature in the front half of the coach was a very pleasant 76 degrees F.  It was cooler in the back as most of the window area is in the front half of the bus, including the large southwest facing windshields.

Linda returned from her trip to Gainesville with more than just a vegan mock turkey roll.  Besides the Tofurkey brand products Earth Origins also had Gardeine brand products.  We have had other Gardeine products that were very good so she decided to try their mock stuffed turkey roll.  As long as she was there she picked up a half dozen other frozen entrees to try.

I had just finished editing the posts for August when Linda suggested we go for a walk.  It was 4 PM and the late afternoon light was nice so I took the camera.  We only made it a couple of sites up the road and stopped to talk to the new arrivals from Alaska.  We had no sooner resumed our walk when Linda got a call from Diane.  John had surgery recently, and will be off work until after the holidays, but is recovering nicely.  We strolled along slowly while they talked and I took a few pictures.  I wore my sweater but the sun was already behind the trees and I was pretty quickly uncomfortably cool in the shade.

We crossed paths with John and Ali and stopped to chat for a while.  We learned last night at the campfire that Jeff and Kathy’s dog Teddy had succumbed to his lymphoma this past Sunday.  Teddy was very sweet and we know how difficult it is when a pet dies.  We also learned that Jeff had been taken to the hospital in Ocala and was scheduled to have a colonoscopy earlier today.  The report back from Kathy was that he might have colitis.

When we got back to our rig Linda made hot hibiscus tea.  I had planned to upload some blog posts today but I had spent enough time in front of my computer for one day and sat on the couch with my iPad for a while instead.  I rarely take naps but I am not opposed to the idea.  I laid down at 5:15 PM and dozed until Linda got me up at 6 for dinner.

Linda on the phone with Diane Rauch as we head into the older south section of the resort.  That’s one happy girl.

Linda on the phone with Diane Rauch as we head into the older south section of the resort. That’s one happy girl.

After dinner we both changed into warmer clothes and Linda packed our wine to take to the fire circle.  We got there a little before 7 PM, later than usual, but the only people there were John, Big Mike, Jim (Sonny Fox), and Tom (from Hilton Head, SC).  Another couple, who have the site just east of John and Ali, showed up just after us but that was it for the evening and John did not get his guitar and perform.  Besides the much cooler weather there was a dinner/dance at the clubhouse this evening, so John had anticipated a smaller than usual crowd.  That was nice in a way, both for him and us, as we got to talk more than usual.

The temperature had already dropped into the lower 50’s at 7 PM.  In spite of our best efforts we were not able to get the fire really hot, and did want to build it too large, so by 9 PM it had dropped into the mid-40’s and everyone had left except for me and John.  I spread out the fire and put the implements in the shed and John locked it.  He joined Ali at Jeff at Kathy’s fifth wheel trailer, where Ali was visiting with Kathy, and I walked back to our rig.

Linda was in her sweats with her blanket over her legs reading her latest e-book with a cat on her lap.  I changed into my sweats but did not feel like doing much of anything.  I flipped through TV channels but did not find anything that caught my interest.  PBS was running a Peter, Paul, and Mary 50th anniversary special, which would normally have been very interesting to me, but it was a fund raiser made up of old clips, interviews, and pleas for money and I just was not in the humor.

The temperature in the coach had dropped to 68 but we both felt a little chilled so I turned on the front thermostat and Aqua-Hot diesel burner.  I made a cup of hot decaf chai tea, played a few games on my iPad, and worked on this post before finally going to bed at 11:30 PM and going to sleep.

 

2015/10/31 (S) Boo!

We overslept a bit this morning and did not get up until 7:20 AM.  We dressed quickly and drove to breakfast separately as we had to go to separate places afterwards.  We got there at 8 AM and had a nice chat with the folks at our end of the table.  It was a big group this week, at least 24 people, maybe more.

Linda left breakfast at 9:15 AM to meet Diane at Kensington Metropark at 9:30 and go walking.  I lingered at the restaurant until after 9:30.  I drove back to I-96 and Grand River Avenue in Brighton, where I filled my fuel tank at the Shell station, and had a nice QSO with Mike (W8XH) while driving.  I then drove across the street to Brighton Ford to pick up the four spin-on coolant filter/conditioners I ordered yesterday.

Brighton Ford’s parts department is a NAPA outlet but they do not have any signs to that effect as Ford Motor Company won’t allow it.  My next stop was up Grand River Avenue towards Howell at the O’Reilly’s Auto Parts store where I picked up the nine (9) gallons of Chevron Delo 100 SAE 40 engine oil I ordered yesterday morning.  I drove home and chatted a bit more with Mike on the way.  I found out that he gets his Lawn tractor serviced at/by Sloan’s in Linden and is very pleased with them.  He has a trailer for transporting his lawn tractor and is willing to let me borrow it to transport ours when I am ready.

When I got home I unloaded the oil and filters and then emptied the dishwasher, refilled it, and started it.  I then went to my office to work.  I had an e-mail reply from Byron Pigg with information I needed to finish the article for Bus Conversion Magazine (BCM) about his 1985 Model 15 Eagle bus conversion.  I incorporated the new info into the Word docx and then called Byron on the phone.  We spent at least an hour going over the article and chatting about bus conversions.  After we wrapped up our conversation I worked a bit longer on the article making the last few edits and removing blemishes from two of photos.  I uploaded the article (Word docs) and all of the photo files (jpgs) to my BCM Dropbox folder at 2:15 PM and then e-mailed Gary (publisher), Mike (editor), and Jorge (layout).

Shawna gets Madeline into her Bumblebee costume for Halloween Trick-or-Treat in their neighborhood.

Shawna (back to camera) gets Madeline into her Bumblebee costume for Halloween Trick-or-Treat in their neighborhood.

While I was doing all of that Linda firmed up our Halloween plans with our son.  We left the house at 2:45 PM and drove to Ann Arbor, arriving at their house around 3:30.  Shawna got Madeline into her bumblebee costume and Linda gave her a Halloween gift bag with a rag doll, some candy, and a card.  At 4:15 we walked over to a neighbor’s house for a gathering that included snacks/dinner.  We talked to host Laurel’s parents, Tom and Kendra, who were there from San Diego, California.  All of the kids and most of the adults left at 5:15 to go door-to-door trick-or-treating on Granger Street.  Granger was closed off to vehicles for several blocks with policeman at each barricade and there were hundreds of people out and about.  Many of the adults were in costume, some quite elaborate, and it was quite a sight.

Madeline caught on very quickly to her role in all of this and would often walk past other, larger children right to the front of the line to get her treat.  She is just shy of three years old so it was cute.  One of the houses had two large pumpkins out front, appropriately carved.  They were real pumpkins and each weighed about 1,500 pounds when they were delivered by a truck.  Madeline is above average height for her age but these pumpkins towered over her.  The homeowners are well known in the neighborhood for having these giant pumpkins each year and bring in mind-boggling large quantities of candy in crates.  You gotta love neighbors like that.

The rain held off for most of the prime trick-or-treat window from 5 – 6 PM but I was cold and went back to the house a little ahead of everyone else.  It started to drizzle around the same time Madeline’s endurance was waning and they got back to the house at 6:30 with the umbrella deployed.  Madeline was eager to take stock of her Halloween “loot”.  We enjoyed watching her excitement at having different items to choose from and then “negotiating” with her parents over having to select just one item for this evening.  Halloween trick-or-treat is perhaps best appreciated while watching a three year old experience it.

We left around 7 PM and stopped at the nearby Whole Foods Market for soy creamer.  We picked up two bottles of Frey brand wine, a white and a red, and two pieces of vegan cake.  Frey makes organic wines without the use of animal products and are a sponsor of “Cooking School” with Christina Perillo on the PBS Create channel.

I got a call from Joe as we were getting ready to leave Whole Foods.  He was packed and ready to hit the road first thing in the morning.  He wasn’t sure if he would make it all the way to our house on Sunday or finish the trip early Monday morning.

It rained on the drive home and I took the wheel as Linda has a hard time with dark/wet roads.  We were reminded, once again, of the poor condition of Michigan’s roads, many of which need to be repainted and have reflectors installed such as the ones we saw in Florida the winter before last.  (I suspect that the reason Michigan does not use them is because of snow plows, but they really make it safer to drive dark roads at night.)  We got home sometime after 8 PM and had dessert.  I checked the bus for leaks buy did not find any new water.  I texted Joe our address, checked e-mail, and then opened the package from Rockler Woodworking that our postal carrier had delivered earlier in the day.

The maple veneer from Rockler was a bit darker than I had hoped, but it will still be a nice contrast to the walnut trim when suitably finished.  The two shelf brackets were certainly substantial enough but it remains to be seen if the wall of our coach is adequate to support the table without a leg to the floor.  The main issue will be the fasteners near the top which will be in tension and trying to pull out of the wall.  Of secondary concern will be the lower tip of the brackets, which will be in compression, trying to push through the wall and possibly puncturing it.  I may have to use expanding bolts or toggles rather than screws for the upper (tension) fasteners.

We had some hot tea and went to bed.  Although I did not get to work on the bus today I got a lot accomplished and we had a great time watching our younger grand-daughter experience Halloween.

 

2015/10/24 (S) Meghan and Chris

We drove separately to our SLAARC breakfast in South Lyon as Linda had plans to walk with Diane at Kensington Metropark after breakfast.  We drove through some heavy rain after which I chatted a bit with Tom (W8TAF) and Mike (W8XH).  As always, we enjoyed the breakfast conversation with our fellow amateur radio operators.  Linda left at 9:15 and I lingered until 9:30 enjoying my last cup of coffee.  I paid our check and had just headed for home when Mike (W8XH) called me on the radio.  We had a good chat about my Hi-Q 6-80 mobile HF antenna and will try to find a time to test it using his newer VNWA.  Mike has learned a lot about how to use it in the last couple of years and is always willing to put that knowledge to use to help his fellow ham.  I would love to figure out a way to mount this antenna so we can take it with us this winter and use it, but I doubt that will happen.  We just have too much else that has to get done in the next month that is more important than this.

At home I pulled up the DX Engineering website on my iPad.  I found their Mix 31 snap-on ferrite chokes and put them in my cart.  If I can find a few other small things to buy the order will qualify for free shipping.  I suspect that will not be a problem.

Next I pulled up the Sony alpha app and researched the acronyms they use for various features of their cameras and lenses.  The model numbers for their A-mount lenses all begin with SAL (Sony “A” Lens) and their E-mount lenses all begin with SEL (Sony “E” Lens) so that helps sort those out right up front.  However, they make both 35mm full frame (36mm x 24mm) and APS-C (24mm x 16mm) lenses in both mounting systems.  The FF lenses can be used on APS-C bodies, such as our Sony a100, but the APS-C lenses, which always include the letters “DT” in the product name, cannot generally be used on FF bodies.  Our new Sony SLT-a99v DSLT camera body, however, can detect a DT lens and automatically limits the active portion of the sensor to an APS-C size area.

SAM stands for “Smooth Action Motor” and SSM stands for “SuperSonic wave Motor” both of which are used with certain lenses, especially large telephoto ones, that have their own internal focusing motor.  OSS stands for “Optical Steady Shot.”  Even though the alpha series cameras have image stabilization built into the body some Sony lenses also have image stabilization built into them.

One of the things I was trying to find out is which lenses have distance encoders so they will work with the ADI (Advanced Distance Integration) feature of the a99 body and compatible Sony flash units.  The lens specification table in the alpha app was not really clear on this point.  Some lenses were marked with a small circle for this feature and others with a dash.  If their nomenclature is consistent with other entries the dash means “no”.  Logically then the circle means “yes” but I did not pursue this further.  I will have to experiment with the 18-70mm APS-C format lens that came with the a100 and see if it supports ADI.

I opened the B&H Photo Video app and revisited the reviews on the Sony HVL-60m flash.  Although more expensive than the HVL-43m I added it to my cart.  Besides being more powerful it has an available external battery pack which I found and also put in the cart.  Finally, I added the Cotton Carrier dual camera harness to the cart.  I found my Minolta electric shutter releases and checked to see if they worked with the alpha 99.  They did!, so I did not need to order new ones.  B&H was closed for online order processing until 7:30 PM this evening so I did not submit the order right away.  The Cotton Carrier is on sale until the 26th so I will submit the order tomorrow while the sale price is still valid.

Linda got home at 12:30 PM and we had the last two vegan hotdogs for lunch.  She then started preparing dinner and I went to my office.  I did a load of laundry, dealt with e-mail, checked in with RVillage, and copied photos from both the Sony a100 and the Sony a99 to my computer.  I updated my BCM article spreadsheet and then moved article folders to the proper directories and deleted them from my BCM Dropbox folder.  I added 80 pounds of solar salt to the water softener and then brought the laundry upstairs and hung it up.  By 4:30 PM I was feeling very tired and took a short nap until Meghan and Chris showed up at 5 PM.

We showed them the driveway and bus projects and then went inside the house just as it started to sprinkle.  Everyone selected a beer and we were standing around the kitchen when a brief, but very intense, line of storms moved through our area with heavy rain and strong winds.

For dinner Linda made a salad of dark leafy greens with tomatoes, carrots, mushrooms, and raisins dressed with a raspberry vinaigrette.  The main course was a Farro pilaf with dried cranberries, onions, garlic, broccoli leaves, and slivered almonds.  Yes, broccoli leaves.  The whole broccoli plant is edible but until recently only the flowerets were available in stores.  The side dish was Brussels sprouts cut in half and oven-roasted with salt, pepper, and a little olive oil.  Dessert was pears in wine.  She used the Witch’s Brew, a spiced red wine that was perfect for this dish and this time of year.  After poaching the pears she reduced the wine to a sauce and chilled everything in the refrigerator for hours.  (The pears were made ahead of time as was the Farro, with the main dish being finished just before serving.)

We sat in the living room with the fireplace on and chatted about houses, pets, travel, sports, and the upcoming holidays.  Meghan and Chris stayed until 8:30 PM and then headed home.  It was a nice visit during which both cats actually came out of hiding and allowed themselves to be petted, a rare treat in Jasper’s case.

We were both tired, partly the residual effect of our altered schedule on Wednesday and Thursday, so we finished clearing the table and went to bed.  The Detroit PBS Create channel was featuring vegetarian (including vegan) episodes of various cooking shows so we watched a few of those before turning off the TV and going to sleep.

 

2015/10/13 (T) Desk Alignment

I got up at 8 AM, put on my robe, made coffee, fed the cats, and refreshed their water fountain while Linda got dressed and washed blueberries to put in our granola.  We took our coffee to the living room where I turned on the fireplace and we were joined by our feline friends.  I put the finishing touches on yesterday’s post and e-mailed it to myself while Linda pulled up the latest video post from Dr. Michael Greger at NutritionFacts.org.

Linda left at 9:30 AM to meet Diane at Kensington Metropark for their weekly walk.  As this will probably be their last walk together until spring they planned to go to lunch afterwards.  While there was some work I could do by myself on the (permanent) installation of the desk there were other aspects of the job that would definitely require two people.  I needed to finish updating the roster for the FMCA Freethinkers chapter so I spent about 30 minutes reading the manual for the new Sony SLT-a99v camera and then got dressed and worked in my office for the rest of morning.

After a short lunch break I resumed working on the roster until Linda got home.  She and Diane had lunch at Baker’s in Milford as it is close to the Metropark parking lot where they meet.  We removed most of the things from the bus we were not currently using, many of which were stored in the sofa storage box.  We got the sofa seat off of the desk pedestals and set it back in place on the sofa base.

I wanted to use pieces of a 24″ X 30″ furnace filter to cover the various air inlets in the desk bases and the air outlets in the OTR HVAC duct.  The best way to hold the filter material in place appeared to be with some very strong tape.  We did not have any such tape on hand so Linda went to Lowe’s and bought a roll of Gorilla Tape while I cut pieces of filter material to fit the various openings.

The left desk base and passenger side OTR HVAC duct showing the pieces of furnace filter material used to seal these openings while permitting filtered airflow.

The left desk base and passenger side OTR HVAC duct showing the pieces of furnace filter material used to seal these openings while permitting filtered airflow.

We got all of the openings taped up but I still needed to fabricate two tongue and groove alignment devices between the pedestals and the center connector/cover.  I make these out of flat mending plates, one on the pedestal (tongue), and two on the connector/cover (groove).  The tongue is flat against the back side of the pedestal vertical board and protrudes about 1/2″ beyond the edge.  The groove is made from two plates, one stacked on top of the other, attached to the back side of the vertical connector/cover board.  The upper plate is just back from the edge of the board and the lower one (next to the wood) is offset from the edge a little more than 1/2”, just enough to create a space for the tongue.  The tongue and groove devices match two others lower down on the connector/cover.  All four of them are oriented vertically allowing the connector/cover to drop into place and force it to align with the matching pieces of the pedestals.  A pair of horizontal plates, one on each pedestal, provide a resting surface for the connector/cover that aligns it horizontally.

With the devices fabricated we were finally able to set the pedestals on the bases, drop the connector/cover in place, and align everything as if the entire desk was a single unit.  We then got the Corian desktop out of my car, brought it into the coach, and set it in place.  It will require some careful adjustments before we screw everything down but it basically fit properly and looked good.  Final positioning of the left pedestal and base, however, would require us to put the front HVAC duct cover in position.

We got the cover out of the library and into the bus for the first time since we brought it home from Jarel Beatty Cabinetry in Logansport, Indiana.  The length was perfect but the bump out where the heater hoses were originally going to loop through was too deep.    I suspect the mistake was in my design/drawings.  Jarel knew this piece was supposed to line up with the left pedestal and base but I no longer recall if he even had the desk pieces in his possession when he was building the cover.  At this point it didn’t matter anyway.  The misalignment is with the base and is not very visible.  Also, the bump out is screwed on to the main cover so it can eventually be removed and trimmed or replaced with one that has the correct dimensions.

Once we had the cover in place I realized that I also needed to fabricate and install alignment plates between the cover and the left pedestal.  I had not planned on this and did not have enough mending plates so we went to Lowe’s to buy more.  While we were there I bought another can of 40:1 premixed fuel and a bottle of bar and chain oil for the new Poulan Pro 18” chainsaw.  We stopped at Walmart to see if they stocked a particular folding chair made by Stakmore that we have seen online, but they did not.  We think it would work nicely as a desk chair, and go well with the interior materials and colors in our bus, but we would like to see one in the round before buying it.

Back home I worked on the alignment plates while Linda prepared dinner.  We had leftover lentil loaf, microwaved sweet potatoes, and a mix of steamed broccoli and Brussels sprouts.  She added a little water to the lentil loaf before reheating it to moisten it a bit.  We both like ketchup on our lentil loaf and I added some Pick-a-Poo sauce to mine.  All three dishes were served hot, which was comforting on a cool evening, and everything was very tasty including the cup of hot tea.

I returned to the bus after dinner and finished installing the mending plates on the HVAC duct cover.  I was not able to put it in place by myself, and there was no reason to have Linda come out and help at this hour, so I set the thermostats back and locked up the bus.

I called Butch and this time the call went through.  I updated him on the installation and testing of the fan-coil heat exchangers and asked him about the operation of our new refrigerator.  He suggested that I isolate the remote temperature sensors by using pieces of the furnace filter material to keep them from touching an objects or surfaces directly.  He and Fonda are wrapping up at the RV Park in Bouse and moving to Quartzsite on Thursday.  After we were done talking I worked on this post while we watched a few TV programs and then went to bed.

 

2015/10/06 (T) Trimming & Stripping

We did not get an early start to our day today.  I got up a little after 8 AM and Linda got up 15 minutes later.  Even so, she still had our granola and berries ready before I had the coffee made, but in my defense I had the extra step of transferring the three pounds of coffee we bought yesterday from their paper bags to our metal containers with the air-tight lids.  We were wondering about whether grapes are berries so Linda Googled the topic.  Botanically, grapes are berries but strawberries and raspberries are not.  Also included among the “true” berries are bananas, tomatoes, cucumbers, and eggplants.  That’s right, tomatoes, cucumbers, and eggplants are fruits.

Linda left at 9:30 AM to meet Diane at Kensington Metropark for a 10 AM walk.  Mike from Bratcher Electric showed up at 10:30 to revisit the wiring project I needed his company to do.  They are going to install a 100 Amp disconnect switch next to the transfer switch in the southwest corner of the garage, run power to the disconnect switch from the transfer switch, and then run a 4-wire service entrance cable (SEC) from the disconnect switch through the garage attic to the electrical distribution panel in the closet with the HVAC system for the library.  The electrical panel is currently a 60 A sub-panel of the main distribution panel in the basement and this project will convert it to a 100 A main panel while still allowing it to be powered by the generator if the utility power goes out.

When Mike left I gathered up the two metal cutting tools I borrowed from Chuck, our corded 1/2″ Craftsman drill (which I needed to power one of the nibblers), the small Rigid drill kit, and my telescoping inspection mirror.  My plan was to cut one or two openings in the passenger side HVAC duct for the heater hoses but I decided to do some yard work instead.

We still had some bushes growing out over the drainage ditch by the mailbox and I wanted to get them trimmed up and add the waste material to the timber pile before Phil hauled it away tomorrow (hopefully).  I was still working on this little distraction when Linda got back from her walk so she got a pair of gloves and helped.  The bushes and trees in this area have an extensive system of vines running through them.  I got a lot of the smaller vines cut and pulled free and I managed to trim one bush back enough to create an “entrance” to the inner part of this stand of trees.

Once I was “inside” the grove I found one of the main sources of the vine, a massive thing that looked like something out of a Harry Potter movie.  It was easily 10″ in diameter where it came out of the ground and had 4″ to 6″ pieces branching off in different directions.  I have no idea what kind of vine this but I suspect it is a wild grape vine.  Given its size I surmised that it has been there for a very long time gradually chocking off the trees.  I will have to eventually cut it out, but I would like to find out first just exactly what it is.

Linda helped drag all of the clippings over to the disposal pile where we cut some of them into smaller pieces before adding them to the pile.  We noticed a small tree hanging out into the space above the driveway that Phil is about to build.  We thought the tree was dead and decided to cut it down.  It was 5″ in diameter 6″ above the ground–big enough to require the chain saw–and also had a lot of branches that were large enough to be more expeditiously dispatched with said same machine.

After felling the tree and de-limbing it I was not so sure that it was dead.  We had a half dozen other trees along the northern edge of this stand woods that looked to be similarly dead but I decided not to cut them down.  One in particular had a lot of obviously new, small branches.  We will wait until spring and see which, if any, of these trees develop leaves.  If they are alive I will trim them instead of cutting them down.

We put away the yard tools and took a break to have a light, late lunch of vegan cold cuts sandwiches and black grapes with a glass of beet juice.  I like beets on salads and as a side vegetable.  Beet juice is OK but a bit more of an acquired taste.  We have added it into our daily food plans because of its ability to control blood pressure.  Linda is adding ground flax seed to her granola for the same reason.

Measuring and cutting wallpaper on the dining room table in the house.

Measuring and cutting wallpaper on the dining room table in the house.

At 2 PM we decided to hang the wallpaper in the hallway of the bus so we gathered all of our tools and took them to the coach.  I measured the wall and determined the lengths (30″) and widths of the four pieces; two full width (26.5″) and two partial width (15.5″), one for the left end and one for the right end.  We cut the four pieces on the dining room table in the house where we could unroll over six feet of wallpaper, measure more accurately, and cut more easily.  We cut the two full pieces out of the end of the first double roll and cut the two partial pieces out of the beginning of a new double roll.

Linda took the pieces to the bus and laid them out on the bed.  I was getting ready to pour some GH-95 paste into the tray and roll it onto the wall when I decided to remove the trim board that separates the upper wall from the vertical mirror strips on the lower wall.  My intent was to avoid having to trim the bottom edge of the wallpaper by tucking it behind this board.  What I discovered was that the strip mirrors on the lower portion of the wall were glued to the wallpaper and some of them were loose.

The fact that the mirrors were glued to wallpaper and not to the plywood wall surface meant that they could be removed.  I unscrewed the four vertical pieces of wood trim that framed the mirrors in three panels and then removed the bottom trim piece.  I carefully removed each mirror by prying the underlying wallpaper loose from the wall using a large screwdriver and working from the top down.  When the entire strip was loose I cut the wallpaper to release it.  I handed them to Linda and she stored them carefully inside the built-in sofa.  I managed to get all of them off except one which fractured in several places.  We taped it up and vacuumed up the few glass fragments that were created when it broke.

At this point we were clearly not going to hang the four pieces of wallpaper we just cut as we needed to finish stripping the base layer of the old wallpaper first.  We also had to take a little time to decide how to finish the lower wall.  One option would be to wallpaper the entire wall and not put the wood trim back.  We probably have enough wallpaper to do that, even after cutting the four smaller pieces for the upper wall, but we did not think the wall would look right if we did that.

Another option would be to install wood panels to replace the mirror strips.  In this case we would use a light wood with a natural finish to provide an intentional contrast with all of the walnut trim.  The mirror strips are slightly beveled on their long edges and measure 3/16″ thick at those edges.  That means a 3/16″ hardwood veneered plywood should be a perfect fit, allowing all of the wood trim to go back in place.  Maple or Birch with a natural finish are the most likely choices.

The wood panels is the option we will almost certainly pursue and we do not have to resolve exactly what panels to use in order to finish wallpapering the upper part of the wall.  All told this will push our finish date back a couple of days, but we don’t really have a finish date anyway, and we will like the final result a lot better.  We really do not like the strip mirrors and wish we could remove or cover all of them.

It was only 4:30 PM when we quit working in the bus for the day but we had both had a relatively physical day and were ready to quit.  The lighting in the hallway was also a little dim due to the continuing heavy cloud cover which was having the added effect of lowering our energy level and enthusiasm a bit.

My last couple of e-mails to Lou Petkus of the SKP Photographers BoF had gone unanswered so I called Lou to make sure everything was OK.  It was; he and Val have just been very busy.  We know about busy.  We had a nice chat about cameras and RVing plans for the upcoming winter.

Linda always puts nice dinner meals on the table and tonight was no different.  She halved and cored a white acorn squash and baked it in the oven with a little vegan butter and brown sugar.  She had a few Brussels sprouts left over and some baby carrots so she added onions and sautéed them to make a very good vegetable medley.  Finally, she heated a package of mock chicken in orange sauce.  The trio of dishes was not only tasty but lifted my spirits; not that either of us are down, but the weather has been heavily overcast for several days and had a slightly depressing effect on our moods.

I got a call from Phil after dinner updating me on his availability to work on our driveway and French drain project.  The 2-day job he started yesterday morning is probably going to take him the entire week to finish so there is very little chance we will see him back at work on our project before next Monday.  He did, however, find time to call a company that can hydrojet the culvert under our road and find out their pricing.  He gave me the name and phone number and I will call them tomorrow and try to set something up.  The other upside is that we have more time to pull dead trees out of the woods in front of our house, cut them up, and add them to the disposal pile, if we so choose.

Linda’s favorite TV shows are concentrated on Sunday, Monday, and Tuesday evenings so we watched NCIS and NCISNOLA followed by an episode of LIMITLESS, just to see what it was like.  I watched Two and a Half Men, which I happen to find very amusing, and then went to sleep.

 

2015/09/29 (T) Bus Windshields

Today was windshield day.  A week or so ago Chuck made appointments for both us to have windshields replaced on our buses by the local Safelite franchise.  Chuck knows Scott, who now has a management position with the company, and arranged the work through him.  The appointment was nominally from 8 AM to noon so Chuck was at his shop before 8.  We figured it would take a while for the crew to do his two lower windshields so I got up around 7 AM but did not have coffee or breakfast.  I finished yesterday’s blog post and then went through my final departure tasks starting at 8:30 AM.  I texted Chuck at 8:45 AM and pulled out of our driveway at 8:50 AM, figuring that was late enough to miss most of the morning traffic headed into the northwest corner of the Detroit metropolitan area.  Chuck texted back that I could take my time as the crew had not shown up yet.

The first raindrops came as I was pulling out of our driveway.  As I pulled out onto Hacker Road I had a clear view of dark clouds to the northwest.  Although my destination was 20+ miles to the southeast I headed north towards M-59.  The shortest route would have been south, and gotten me quickly onto pavement, but there are some low branches before the road ends at Grand River Avenue so I do not go that way.  From Hacker and M-59 the shorter route would have been east to US-23 and then south to I-96 but that interchange is a left exit, left entrance in the middle of an extensive construction zone; not the sort of thing I wanted to deal with in the bus.  So I waited patiently for a break in the traffic and then headed west on M-59 towards the storm clouds.  A guy heading east had to slow down while I pulled out a flipped me off as he went by.  I hope he had a nice day.

I encountered heavier rain as I traveled west for about four miles.  I turned south onto Latson Road and drove away from the rain, reaching I-96 about four miles later.  I headed east on the I-96 and had an easy drive all the way to Beck Road with only an occasional raindrop.  Even at this hour of the morning there were traffic slowdowns along the way but no parking lot traffic jams.  The Beck Road exit was easy to navigate going south and it was equally easy to position myself for the left turn onto Grand River Avenue.  About a mile and a half later I pulled into the parking lot for Chuck’s shop and phoned Chuck to let him known I was there.

I knew in advance how he wanted me to position my motorcoach but there were enough vehicles parked in various places that I wanted him to spot for me.  I lifted the tag axles, pulled up to the building, and then turned hard to the right.  I backed around to the driver’s side to get somewhat parallel to the building and then started angling towards the passenger side.  There is space next to the building in front of Chuck’s shop directly across from his large (bus size) overhead door.  My objective was to back around into that space and then pull forward steering hard to the left to get lined up with the door.  I have done this before and managed to do it again with Chuck’s assistance.  Our Prevost H3-40 VIP conversion is surprisingly maneuverable with the tag axle lifted off the ground.

There were two Safelite vans there when I arrived and Charlie and Eric were already busy working on Chuck’s lower windshields.  Chuck had backed his coach into the shop so I could pull in nose first and get the front end out of the rain if needed.  Since there were only two guys, and the removal and installation of one of these windshields is a two man job, I just parked my bus outside and shut it off.

I called Linda at home but did not get her so I tried her cell phone.  She was at Kensington Metropark walking with Diane.  She said we had heavy rain at home before she left and that it was moving towards the shop.  I could see the dark clouds to the WNW and it eventually rained bucketfuls, albeit for only a brief time.

A couple of years ago Chuck and I went together and bought five lower windshields from Prevost for our H3-40 VIP coaches, two for him and three for me, for the ridiculously low price of $125 each.  They were shipped to his shop in a big triple set of cardboard boxes with foam spacers on a pallet and have been sitting there waiting for us to find someone to install them.  Chuck decided to use both of his, in part because there were stone chips in the current ones, and in part because he is vacating his shop and needed to reduce the amount of stuff that has to be moved and stored.

The existing windshields on Chuck’s coach both cracked rather badly when they were removed, as in multiple dozens of fractures, but did not shatter.  Safety glass is a wonderful thing.  He was not planning on keeping the old ones but it was obvious that removing a windshield in order to install a new gasket with the idea of reinstalling the glass was probably not possible.  Charlie and Eric removed the old gaskets and then cleaned off the frames.  Chuck’s old gaskets had been slit at the corners by a previous installer, probably to make it easier to get the gaskets over the glass, but should not have been altered in that way.

Chuck had new gaskets and spline material so the guys got one of the new gaskets installed on the frame.  It looked like it would be too big but by the time they got it pressed fully into place it was a perfect fit.  They lubricated the gasket and set the new windshield in place.  After working the top of the gasket over the top edge of the glass they slid the windshield from the outside edge all the way towards the center pillar.

Chuck and I were both hungry and thirsty.  Since Charlie and Eric were working on his coach I took Chuck’s suburban to Panera for coffee, a muffin (for Chuck) and a bagel (for me).  I made the trip twice.  I was almost there when I realized that I did not have my wallet and went back to get it.

The guys finished installing Chuck’s windshields and went to lunch.  We did not leave as we had no idea how long they would be gone.  It turned out to be about an hour.  When they got back I had Charlie look at my two lower windshields.  The passenger side was cracked and definitely needed to be replaced.  The driver side had two small rock dings but they were not directly in front of the driver’s seat and not near an edge so I decided to only replace the passenger side lower windshield at this time.

I started up the bus, pulled the nose into the shop, and lowered the suspension to make it easier for the guys to work on it from the outside.  I pulled in far enough to make sure the front part of the roof was completely inside the building as it is lower than the rest of the roof and slopes forward.  I lowered the rear more than the front to make sure any rain that hit the portion of the roof that was outside the building ran to the sides and rear rather than forward and down the windshields.

To remove my windshield they removed the spline that locks the glass into the gasket and then managed to get the glass and gasket out as one assembly.  The glass already had a 10″ crack when they started and was fractured in 100 places by the time it came out.  They cleaned off the frame, which had a lot of crud on it, and then put the new gasket on.  The gasket for the lower windshields is reversible and is used on either side.  It is not rectangular, however, with the vertical edge by the center pillar being longer than outside edge where the glass wraps around into the A pillar.

With the gasket in place they installed the windshield by using large suction cups to pick it up, front and back side, and setting the bottom edge into the gasket with the right edge about four inches from the center pillar.  The passenger side mirror was in the way so I had to loosen one of the set screws and swing it out of the way.  They used a hard plastic stick with a rounded tip and edges to get the gasket over the outside of the top edge of the glass.  Using glass cleaner as a lubricant they then slid the glass towards the center and into the gasket channel.  The glass did not slide easily but Charlie and Eric were big, strong guys and it eventually was in place.  They then used the plastic sticks to get the gasket out from behind the glass and over the edge all the way around.  The last step in the installation was to put Sikaflex adhesive caulk between the frame and the gasket and between the gasket and the glass, all from the outside.  They masked off the frame to protect the paint but did not mask off the glass.  Gasketed glass installation was not something I knew anything about so it was informative to be able to watch every detail of this process.

They had our invoices with them but had to have the office redo mine and e-mail it since I only had one windshield replaced instead of the two we originally scheduled.  Chuck and I each wrote them a check.  Eric had us sign on his Note tablet and printed our receipts on a portable wireless printer.  It had been six hours since they arrived and they had spent five of those working pretty hard.  We gave each of them a $20 tip.

Charlie and Eric loaded up our three old broken windshields and left.  I then backed my bus out and parked it.  Charlie wanted it to sit for at least an hour before driving it to let the Sikaflex cure a bit.  Chuck locked up the shop and we went to Panera (again) for a late lunch.  We both had Black Bean Soup and Chuck had a half sandwich.  Barb called as we were finishing our meal and said she was her way to the shop so we headed back.  She arrived at the shop just ahead of us and inspected the new windshields on their coach.  I then showed her the work we have done on the interior of our coach.  We sat around in the shop talking while I waited for the worst of the rush hour traffic to pass before driving the bus back to our house.

I called Linda around 5 PM and then left for the drive home, reversing my route from this morning.  Traffic was heavy but moved along.  Linda heard me pull in the driveway and helped get me positioned.  It’s hard to sneak up on someone with a Detroit Diesel 8V92 engine.  Once I was parked I shut off the accessory air to the engine bay, disconnected the chassis batteries, and plugged in the electrical shorepower line.  Back in the coach I noticed that the refrigerator had come out of the alcove about 12 inches.  It had not budged on the drive to/from Edwardsburg and Elkhart but I will obviously have to secure it after all.

Dinner was reheated chili and Saltine crackers.  When Linda makes chili she always makes extra and freezes it to have on hand for easy heat and serve meals.  It is a one pot meal the way she makes it and is as good, or better, left over as it is fresh.

Ferman had called while I was gone and let Linda know that he had the Sandstone Corian he needed to build the small table for the bus so after dinner I texted Josh to let him know.  I then checked e-mail but did not respond to any.  We watched NCIS and NCISNOLA on the big TV in the basement and then went to bed.

 

2015/09/23 (W) Autumnal Equinox

We were up at 8 AM, had granola for breakfast, and enjoyed our coffee in the living room by the fireplace.  I like cool mornings.

I spent some time yesterday morning, and again this morning, considering my full-frame DSLR options.  The only 50 MP “35mm” DSLR camera body on the market at this time is the Canon 5Ds/R and there is no indication that Sony plans to introduce a successor to the A99 anytime soon.  The A99 is still available, as is the vertical battery pack/grip and I am at the point where I will probably order one.  It has a 24 MP full-frame CMOS sensor, which is double the resolution of my alpha 100.  More importantly, it will accept all of my old 35mm Minolta A-mount lenses and they will work as designed.

Linda left at 9:40 AM to meet Diane at Kensington Metropark.  I gathered up the laundry, sorted it, and started the first load.  I then settled in at my desk for a while.

I e-mailed Mike (W8XH) to see if he could assist me on Saturday and/or Monday with climbing the tower to do some more antenna work.  I then e-mailed Bill Gerrie to see if he and Karen were in Michigan yet.  I pulled up the initial mockup of the October 2015 issue of Bus Conversion Magazine and proofread my article on replacing the speedometer.  Jorge had done a good job of laying it out.  I e-mailed back four minor corrections, one slightly larger one, and a general comment about the lack of space following periods.  I had an e-mail from Steve Smith (N8AR) with contact information for Yaesu Fusion technical support.

The washing machine beeped so I transferred that load to the dryer and started another one.  I noticed that it was after 11:30 AM so I cleaned the cats’ litter tray, grabbed the garbage from under the kitchen island sink, put it in the trash can, and got it to the street.  Alchin’s normally comes “around noon” but I had a feeling they had already driven by.  They were still in our subdivision, however, and stopped on the way out to empty our can.

I had another cup of coffee and updated this post.  By noon Linda had not called yet let me know she was on her way home so I headed to Lowe’s for a roll of plumber’s sandpaper.  I also picked up the paste we need to hang the new wallpaper.  On the way back to the house I stopped at Teeko’s Coffee and Tea to order some Cafe Europe half-caff blend.  Linda was home when I got back and we had a light lunch.  We have both finally taken off some of the weight we put on this past winter.  Long, hard work days with little or no lunch seem to help.

By the time we got back to work on the bus projects it was 3 PM.  It’s hard to make progress when the workday starts in the afternoon.  Today is the autumnal equinox, so it gets dark much earlier in the evening than it did in late May, June, July and even most of August.  Still, as anxious as I am to get the heat exchangers re-installed we have to deal with the wallpaper in that part of the bus first.  Linda helped me assemble the right desk base, repeating what we did yesterday with the left base.

The left pedestal base with the Aqua-Hot fan-coil heat exchanger mounted inside.

The left pedestal base with the Aqua-Hot fan-coil heat exchanger mounted inside.

We installed the metal grates on the air openings (from the inside) and then used doubled-sided tape to affix the plastic mesh to the metal grate.  We put a 1/2″ plywood spacer in the bottom and marked the locations of the mounting bracket holes and the heat exchanger.  We took the exchanger and spacer out, punched the starter holes, and drilled.  Linda cleaned the heat exchanger and used a pair of tweezers to straighten the bent radiator fins, of which there were quite a few.  We cleaned off the two copper pipe stubs that provide the inlet and outlet for the antifreeze and then attached the self-stick 3/8″ X 1/4″ dense foam weather-stripping around the front of the housing.  We mounted the exchanger to the spacer with approximately 1/8″ of the foam weather-stripping beyond the front edge of the spacer.  We put the spacer/exchanger assembly back in the base and I secured it with screws while Linda pulled it into position, compressing the weather-stripping.

Linda cleans and straightens the fins on one of the fan-coil heat exchangers.

Linda cleans and straightens the fins on one of the fan-coil heat exchangers.

I took a few photographs as we worked and took some more of the finished assemblies.  While we were working we got a call from Philip Jarrell of Precision Paving.  Phil was calling to see if we still wanted the French Drain and driveway work done.  He has been busy all summer and even more so coming into fall when folks decide they need stuff done before winter.  He had given us a quote (estimate) back in the spring but could not do the work then because the soil was way too moist.  The property has dried out nicely over the last seven weeks and he wanted to make sure he did the work yet this year if we were still interested.  I told him “yes” and he said he would call “Miss Dig” right away to get the utilities marked and then get started.

The two desk bases with the fan-coil heat exchangers installed view from above and behind.

The two desk bases with the fan-coil heat exchangers installed view from above and behind.

I think this annoyed Linda as it will be another significant expenditure, but it’s something I think needs to be done and it is not easy to get a slice of Phil’s time.  (Actually, we have done a lot of difficult work together on the bus this summer and I think she was already annoyed from working with me on the right base.)  Not taking advantage of Phil’s availability would likely mean a two-year delay in getting this work done.

This project is actually a combination of two different projects that happened to make more sense to do at the same than at separate times.  The French drain is intended to dry out the far west end of our property which has standing water in the spring and after heavy rains, and stays moist/soft for the first half of the summer.  There are a lot of trees in that area and we have lost some and are losing others.  The driveway work will give us additional parking for people visiting in their RVs and create the main approach to the location for the bus barn that I hope to eventually build.  The topsoil that Phil pulls out from the driveway will be used to fill in low spots on the west end of the property, further improving the drainage in that area.

The right desk base viewed from above/behind showing the fans mounted on the back side of the heat-exchanger.

The right desk base viewed from above/behind showing the fans mounted on the back side of the heat-exchanger.

Linda returned to stripping wallpaper in the bus while I folded the laundry and put it away.  For dinner we had a salad and more of the soup that Linda made yesterday.  After dinner Linda researched wallpaper installation while I worked at my computer and uploaded eight blog posts from the third week of July.  About the time I finished the last one Brendan called so I went upstairs and Linda put the call on speaker.  He is a couple of weeks into his position at Eastern Michigan University teaching Art History and gave us a status report on how it is going, along with news of how Madeline is doing in her new daycare program University of Michigan.

We watched Dr. Michael Greger’s 2015 nutrition research summary on Linda’s iPad.  This is an annual presentation that he does at the vegan Summerfest in Pennsylvania.  His theme this year was the top health concerns of Americans, based on a major survey that was done by one of the national survey organizations, and what nutrition research has to offer with respect to these.  As we already know, many different diseases, one common answer; whole-food, plant-based, nutrition with no animal products.  We really are what we eat, and Americans are now some of the least healthy people on the planet.  We went to sleep reaffirmed in our dietary choices.

 

2015/08/24 (M) Skimcoating

For a change of pace we had granola with vegan yogurt for breakfast.  I made seven cups of the Cafe Europe / Columbian decaf blend but Linda only had one mug as she was meeting Diane at Kensington Metropark at 9 AM to walk.  After she left I gathered up the laundry, sorted it, and started the first load.  I then turned my attention to the bus.

My first task was to cut one of the 8″x8″ sheets of #80 sandpaper in half, put it on the orbital pad sander, and go over all of the Universal Patch and Skimcoat (UPS) that I applied yesterday.  The 80 grit worked well and I only needed the one half sheet.  I swept the floor clean of loose debris and then assembled my tools and materials to patch a few gouges I missed yesterday and then skimcoat the entire portion of the floor that used to have ceramic tile on it.  I mixed 24 ounces (by volume) with 12 ounces of water (by volume), half as much UPS as I did yesterday.  I tried to work more quickly and got most of it applied.  I cleaned up my tools and let them dry while the compound cured.  That also gave me an opportunity to move laundry from the washer to the dryer and start another load in the washing machine.

I had a call from Chuck so I took a break to chat with him.  He and Barbara spent the weekend racing at the old Air Force base in Oscoda, Michigan.  Their bus and race car both ran well and he turned in some very good times.  He had installed a new turbo boost gauge in the bus and based on my experience had selected a 0 to 15, PSI VDO unit.  Apparently 15 PSI is not high enough for his engine.  I have seen the boost on my gauge, which is a 0 to 30 PSI model, go as high as 17, but not often.  For most of our trip to Arizona and back this past winter it did not go over 15 PSI.

The only issue they have with their coach at the moment is their old Amana residential refrigerator.  The freezer is apparently not keeping things as cold as it should and the ice maker is not working.  They use a lot of ice and generally have the freezer stocked, so those are problems.  They bought a bag of ice for the weekend but it appeared to get warm enough to develop surface moisture and then refroze into large chunks, inconvenient at best.  I think they have decided to replace it and want to do so before they leave for the winter and while they still have the shop and the forklift.

Chuck is also going to contact the glass installer and see if he would be willing to install bus windshields.  Both of his lower windshields need to be replaced as do both of ours.  We have five replacements at his shop, two for him and three for me.  I also have new gaskets but he needs to get two sets.  We discussed late September as the best time for me and he will see if the windshield guy will do all four of them on the same day.

I mixed the remaining USP, about 12 ounces (by volume) with 6 ounces of water (by volume) and finished the skimcoating of the bus floor.  I used the last little bit of compound to patch some screw holes and small gouges in the living room floor where carpet had been installed.  There may be a few more but instead of opening another bag of UPS I will probably return it and buy a quart of the premixed compound.  I then cleaned up my tools again and left them in the sun to dry.

Linda got home about this time.  It was just after noon, so we had a light lunch of vegan deli slices with lettuce, onion, and Daiya non-dairy cheese, on thin buns.  A pluot provided a nice, sweet finish to lunch.

We measured for wallpaper the other day so I took the notes and created an Excel spreadsheet to figure out how many rolls of wallpaper to order.  While I did that Linda worked on cleaning and reconditioning drawer fronts with Touch of Oranges and Touch of Beeswax.  After examining the wallpaper in the bathroom (of the bus) I think we need to replace it too.  We took a few minutes to get those measurements and I added them to the spreadsheet.

The wallpaper we have selected is the Lamar (#699-3377R) from the Just Textures collection of Sellars and Josephson.  It is an off-white color with a small texture pattern designed for reverse hang, random match installation.  It is only sold in 2-roll bolts 27″ wide and 4.5 yards long.  We will need more than six rolls to replace all of the wallpaper so we will have to order eight rolls even though we may defer doing part of the hallway and the bathroom for a while.  Fortunately it is not too expensive (as wallpapers go) and is scrubable, which was one of our requirements for use in the bus.  Linda will return the sample books to Delux Drapery and Shade Company in Ann Arbor on Wednesday morning and place the order.

Linda reheated the leftover fajita veggies from last night and fixed some white rice to go with them.  We had fresh strawberries and a little Coconut Bliss non-dairy ice cream for dessert.  Coconut Bliss ice creams are not too coconuty, and are appropriately named.  They are as good as I remember Hagan-Daas being.

I took a little time to add lines to my floor tile layout drawing showing the location of the underlayment sheets.  It looks like I may need at least eight sheets.  I have four sheets in the garage and will install those before buying more.  I spent the rest of the evening working on the article for Bus Conversion Magazine about Larry and Carol Hall’s GM4106 bus conversion and finished it around 10 PM.  I spent another 1.5 hours catching up on e-mail and checking in on the status of Technomadia’s bus renovation project at MasterTech in Elkhart, Indiana.  The weather has turned cool and should be perfect for working on the bus tomorrow.  We need to have long, productive days, so I had a snack and got to bed at midnight, played a few games, and went to sleep.

 

2015/08/18 (T) Walking Grind

We were up at 8 AM and I made a pot of Ethiopian Yirgacheffe half-caff coffee while Linda got breakfast ready.  She made a batch of granola yesterday so we had some with fresh blueberries and unsweetened soy milk.  It’s our standard breakfast, but that’s because we like it so much.  She had an e-mail from Robin at the bakery and had to deal with some issues related to the bakery’s new account, The University of Michigan Ann Arbor.  As I do most mornings I sat in the living room working on my iPad, drinking my coffee, and paying attention to our two cats.

Being Tuesday Linda had a date with Diane to walk at 10 AM and left at 9:30 for Kensington Metropark.  I continued working on my iPad for a while and enjoying my coffee.  At 10:15 AM I called the Livingston County Sheriff and reported the mailbox incident from late Friday evening /early Saturday morning.  Shelby took the call, was very nice, said she was not aware of any other mailbox reports, but would pass the info along to the Desk Sargent.  I checked my e-mail and confirmed with Harvey for Friday at 10 AM to move the old bus refrigerator.  I finally went out to work on the floor of the bus at 11 AM, by which time the outside air temperature was already in the 80’s.

I leave three of the awning style windows in the bus open a few inches so it doesn’t get too hot inside.  I opened all three roof vents, turned on their ceiling fans, and set them to exhaust air rather than draw it in.  I also left the entrance door open to allow more air to flow through the inside of the coach.  I then sanded and vacuumed until about 1 PM.  When I came back in the house I had two missed calls from Michele Henry of Phoenix Paint so I called her back.  I was on the phone with her when Linda got back from her walk.

Once I wrapped up the call with Michele we had a light lunch of hummus with pita chips and both black and red grapes.  While we were eating we were entertained by a gray squirrel who had gotten onto the bird feeder and was hanging upside down by its hind legs.  It would curl its body to bring its mouth up to the bottom of the feeder, emancipate some seed, and then uncurl to the more relaxed stretched out position and eat it.  All of this was also being watched with both interest and considerable skepticism by three crows who were hanging around on the ground under the feeder.  They grabbed seeds that the squirrel dropped but seemed very wary of it, which surprised us.  I speculated that perhaps they had never seen a squirrel behave in this way and were, therefore, understandably and appropriately cautious; crows are very smart, after all.

After lunch we took the three wallpaper sample books to the bus to look at them with the woodwork.  Before we could do that, however, we discovered a small bird trapped in the coach and had to deal with it.  I say “trapped” because it was up on the dashboard and obviously confused by the windshields as it kept trying to fly out through them.  It did not realize it could get out the same way it came in, through the open door.

The bird seemed small and I think it was an immature sparrow but I’m not sure.  It was seeking safe shelter in the space between the dashboard cover and the lower driver side windshield.  I used a broom to try to gently encourage it to fly towards the door but it was understandably suspicious of my good intentions.  I put on a pair of canvas work gloves and it allowed me to gently pick it up.  I tried to release it at the door opening and it flew into the door causing Linda to make a comment about why we use the phrase “bird-brained.”  I caught it again, got outside the bus clear of the door, and tossed it gently away from the bus.  It immediately took flight and flew off to the southwest, apparently none the worse for its ordeal.  I can only image the story it told the other birds.

I got a piece of the Armstrong Alterna Luxury Vinyl floor tile from the garage.  Many of the wallpapers that we thought would look good with the floor tile turned out to be too yellow, and most of the ones with good color tone were too dark, but we found a few that we liked.  Those tended to be lighter without a lot of pattern and a neutral, off-white color.  We are, however, far from a final choice as we do not currently have a sample of the Lambright Notion Linen upholstery fabric or the MCD night shade material and the wallpaper has to work with all of these simultaneously.

We measured the areas that need to be repapered and in the process decided that we would leave the old wallpaper on the inner wall of the hallway, at least for now.  (The paper in the bathroom, which is different from the rest of the coach, is generally in good condition and we are not currently planning on replacing it as part of this project.)  The existing wallpaper in most of the coach is a string cloth with a beige base but distinct vertical threads that contain a noticeable amount of grey and a more subtle herringbone pattern.  It looks good with the walnut woodwork and worked well with the old white carpet, black ceramic floor tile, and bone leather upholstery, so we think it will continue to look good with the new floor tile.

If Josh is at his shop tomorrow we will try to stop and pick up the Lambright Notion Linen sample as whatever wallpaper we choose has to work well with the furniture fabric.  On Thursday we will revisit the papers in the three books we currently have with an eye towards something that has some grey in it.

It was another warm, humid day and I was done sanding so I closed up the roof vents, locked up the coach, and went inside.  Linda prepared a pizza using the gluten-free crust recipe she got from Mara.  Yum.

After dinner I went to Lowe’s and bought two bags of TEC Skill Set Universal Floor Patch and Skim Coat, a mixing bucket, two bags of tile spacers, and three 4’x8′ sheets of 1/4″ SurePly underlayment.  I meant to buy a folding metal sawhorse but left it somewhere in the store.  I was going to buy premixed floor leveling compound but they only had 1-quart containers for $10 each and the directions said it would only cover 1.5 square feet.  I have about 80 square feet of floor to patch and level, so that clearly was not a good solution.

The Universal Floor Patch is a powder that has to be mixed with water, but each bag will cover 20 – 25 square feet at 1/8″ thickness and costs $13; much better than the premixed stuff.  I have a few areas to patch that are deeper than 1/8″ but the material can be applied up to 1/2″ thick per coat, and most of the area just needs a much thinner skimcoat.  It can also be sanded within 24 hours which will allow me to make it very smooth and keep the work moving along.  My goal is to have the floor leveled and sanded smooth by bedtime on Saturday so I can install the 1/4″ underlayment on Sunday and start laying tile on Monday or Tuesday next week.

I stopped at Teeko’s Coffee and Teas to get some more of the Cafe Europe half-caff blend.  They had the regular blend but not the decaf blend so I had Roger use the Columbian decaf instead.  He roasted the beans for me while I waited and Jeff showed up along with his wife as I was leaving.  They were married last September and are expecting their first child late next month.  Jeff was wearing his Pepsi delivery shirt, confirming what the woman at the Kahuna Coffee Shop told us last Friday.

We turned in early as we will be getting up very early tomorrow to drive to Indiana again.  Linda watched an episode of NCIS after which I watched a PBS special on the origins and evolution of the Navy Seals.

 

2015/08/11 (T) Sanding Prep

Our day started with our usual morning routine.  We were out of Linda’s homemade granola, so she made Quaker brand Raisins, Dates, and Walnuts instant oatmeal.  This has long been my favorite oatmeal and I still like the taste and texture.

After breakfast we removed the containers of water from the bus fridge, rolled it out of the alcove, and unplugged it.  We then moved it farther up into the coach, behind the front passenger seat, so I could work in the alcove and on the floor.  We then got the Shop Vac up into the coach.

Linda left around 9:30 AM to meet Diane at Kensington Metropark.  They decided they want to get together and walk once a week and the Metropark, which is about half way between their houses, has as an extensive trail system.

While Linda was away I went to the FedEx Office store in Brighton and got a copy of the 11″ x 17″ sheet with the drawings of the seat and back cushions for the built-in sofa.  I stopped at the Shell station and filled the tank as we would be leaving very early in the morning for Indiana.

Back at the house I vacuumed up as much loose debris as I could inside the coach.  After checking my pantry drawings I decided I could stack at least two pieces of 3/4″ plywood, one atop the other, to get the base of the refrigerator high enough to allow the back to go over the bundle of wires that run along the junction of the floor and back wall without interfering with the pull-out pantry.  This will allow the refrigerator to go into the alcove far enough that we can open the kitchen cabinet drawers under the counter to the left of the sink.

Linda got back around 12:30 PM.  After lunch we were going to mask off the inside of the coach with painter’s plastic and tape.  Our goal was to upkeep the dust that resulted from sanding the thinset and mastic out of cabinets and off of counters and woodwork.  We planned to run the Shop Vac while sanding but knew, a priori, that it won’t suck up all of the dust.

After considering what would be involved in masking off the inside of the coach we decided instead to wrap the refrigerator in plastic to protect it and then tried using the belt sander on the residual thin-set from the old ceramic tiles.  The old aluminum oxide belts failed fairly quickly, which was discouraging, but the sanding did generate a lot of airborne dust, which was encouraging as it indicated the sanding was actually removing material.  Our Craftsman belt sander has a built-in dust collection bag and Linda was running the vacuum so both of those things helped.

Late afternoon we went to Lowe’s and bought a 4′ x 8′ sheet of 3/4″ (nominal) maple veneered plywood and a 4′ x 8′ sheet of 1/4″ SurePly underlayment plywood.  We also got two #36 (very coarse) 4″ x 24″ ceramic particle sanding belts and a box of 200 3/4″ self-drilling screws.

Back home we unloaded everything and I then called Josh to confirm that he could still meet us at the Martin’s supermarket in Elkhart in the morning.  I also called Butch to remind him that we were still coming down.  The rest of the evening is lost to me, as I did not record our activities soon enough, but they probably involved e-mails, computer updates, and iPads.

 

2015/08/07 (F) Arrangements

We had our usual, but never boring, homemade granola with fresh blueberries for breakfast.  I brewed a pot of the Costa Rican half-caff coffee we bought yesterday without tasting it first.  We found it to be somewhat bitter, which is not our taste in coffee, so we probably will not buy more after this batch is gone.

We spent a good part of the morning researching cabinet pulls on the Cabinet Service Hardware (CSH) website.  We found a pull on the CSH website that appeared to be identical to the one from The Home Depot, which is a Rockefeller Antique Brass from Liberty Hardware.  The one from CSH was a Belwith Keeler HH.P135-AB for $2.47 each.  The one from The Home Depot was $2.48 plus tax but no S&H.  Since we have the one from THD in hand and like how it looks we will probably buy them locally.

Many of the drawers in the bus have the pulls attached to the walnut face and then the face attached to the front of the drawer box.  Thus, the only way to remove the pulls is to first unscrew the box from the face.  I took the face off of one drawer and installed the new pull.  It fit perfectly, confirming that the mounting hole spacing is 3″ center-to-center.   The one from THD comes with 1″ and 1.5″ #8-32 machine screws but it looks like we will need something shorter than 1″ for the framed drawers and shorter than 1.5″ for the solid drawers.  The cabinet doors have 3/4″ thick frames so the 1″ machine screws may work for those.  Thus we should be able to use some of the machine screws that come with the pulls from THD but will have to buy some as well.  The pulls from CSH do not come with screws so we would have to buy those anyway.

Linda left around noon to meet Diane in Livonia to see a movie (Ricki and the Flash) starring Meryl Streep, Kevin Kline, and Rick Springfield.  I went on an errand run while she was away.  At The Home Depot in Howell I found 10 packs of the drawer pull we like so the price came out to under $2 per pull compared to $2.48 when purchased individually.  We need 58 to replace all the ones in the coach plus at least four for the new desk drawers so I bought six 10-packs.  We have not decided if we will replace the single screw round pulls on the two TV cabinet doors with the double screw pulls.  If we do we will need a couple more pulls.  If not, we will need two round pulls in the same style and finish, which THD also carries.  I bought small packs of #8-32×3/4″ and #8-32×1-1/4″ lengths so I can figure out what lengths work best in each location.

Jarel called while at was THD.  The plans for the built-in sofa had arrived in today’s mail and he had a few questions.  We talked through the issues and came to the conclusion that it would be better for us to come down on Wednesday instead of Tuesday to pick up the desk.  That will give him time to cut the sofa pieces and do some minor assembly and finishing.  The plywood seat and side pieces need to be stained to resemble the walnut hardwood and a 3/4″x3/4″ piece of walnut hardwood needs to be attached to the front edge.  He also needs to cut the piece of walnut veneered plywood for the front and then spray everything with the same lacquer he has used on all of the walnut desk pieces.

As I was finishing up at THD I also got a call from Chuck letting me know that everything was on track for the refrigerator swap tomorrow.  My next stop was at the Howell Lowe’s for a 4′ x 4′ sheet of 3/4″ plywood but I did not like their selection any better than THD.  I ended up buying two quarter sheets (24″ x 48″) of birch plywood.  This plywood has a lot of thin layers, so it is very flat and dimensionally stable, with defect free surfaces that are sanded smooth and very clean edges.  These sheets will go on the bottom of the refrigerator alcove in the bus to elevate the new refrigerator above the new vinyl tile floor.

Back home I texted Josh at Coach Supply Direct, called Terry at A-1 Upholstery, and called Butch regarding the change in our visit date for next week.  Linda got home shortly thereafter and helped me reattach the edge trim to the two doors of the old refrigerator and load them into the back of my car.  We covered everything with blankets and then loaded all of the drawers, shelves, racks, and bins.  Once the old fridge is out of the bus we will clean it, reassemble it, plug it in, and make sure it is cooling.  We will then call DTE Energy to arrange pick up through their recycling program.

Loading pieces of the old refrigerator into the back of the Element to take to Chuck's shop.

Loading pieces of the old refrigerator into the back of the Element to take to Chuck’s shop.

Linda bought an Amy’s Roasted Vegetable Pizza while she was out and cooked it for dinner.  It is our favorite store bought pizza, and much better (for us) than what we can usually get at restaurants and pizzerias (with the exception of Satchel’s in Gainesville, Florida), but not as good as the pizza we had while Mara was here.  That pizza was memorable.

After dinner I got a shower and then worked on the design/drawings for the seat and back cushions for the built-in sofa for the bus.  I started editing blog posts for July but did feel like uploading them.  We went to bed earlier than usual as we had to up at 7 AM tomorrow to go to our weekly ham radio club breakfast.

 

2015/06/23 (T) Grounded

As I wrote in yesterday’s post we did not turn off the lights last night until almost 1 AM because we were keeping a close eye on the weather moving across the lower portion of Michigan’s Lower Peninsula.  Although strong to severe storms were still forecast from 1 AM to 5 AM they either did materialize at our exact location or we slept through them.  We had the house closed up and the air-conditioning on, so that cut down the sound level of outside noises.

A cold front had pushed through by sun up and we woke to a cool morning with blue skies and noticeably lower humidity.  We did not have any trees, or even big limbs, come down and there was no damage to our brand new roof.  The forecast yesterday was threatening enough, however, that in the morning we took the potted plants, and as much of our outside lawn furniture as we could find room for, inside including our sun umbrella and trash cans.  I planned to be gone most of the day, and Linda was leaving mid-afternoon to go to dinner and a movie with Diane Rauch, so our first chore was to put all the lawn furniture, plants, and other outdoor stuff back outdoors.

This week is mostly being devoted to ham radio with the ARRL Field Day as the crowning event this weekend.  My specific focus for most of the week, however, has been the “communications tower” adjacent to the east wall of our house.  As described in previous posts we installed a cable entry box (CEB), mounted the cellular booster in the basement, mounted the inside cellular antenna, and ran coax cables.  The antennas will (hopefully) be mounted on the existing 40 foot tower tomorrow, cabled into the CEB, and cables run from there to devices inside the house.  With any luck by the end of the day tomorrow we will have decent cellular service inside the whole house, the ability to watch OTA TV programs on two different TV sets, and finally be able to connect one of our radios in the ham shack to an antenna.  Today, however, was planned to mostly address other things.

I had an appointment with our dentist at 10:20 this morning and left at 9 AM.  I planned to stop at Chuck’s bus garage and check that the key he lent me worked, but I needed gas for my car.  I did not have time for both and did not really have a choice; I would have to check the key some other time.  I ordered two cables yesterday from Scott (AC8IL) at Adams Electronics.  Later in the evening I was unsure if I had specified the connectors correctly so I called and left a message.  I called again this morning to make sure the message got through.  It did, and my original connector specifications were correct.

I arrived at the dentist’s office about 10 minutes before my appointment time.  I called Rick Short at Isringhausen USA to make sure he was going to be in before I drove two hours to Galesburg, Michigan after my dentist appointment.  I got his voice mail a left a message.  “ISRI” makes very high tech air suspension driver’s seats that are used as original equipment in motorcoaches, semi-tractors, heavy equipment, and locomotives.  I would really like one for our bus, but it is not proving easy to get.

Dr. Steve and his assistant, Leslie, made molds of my upper and lower teeth and a bite impression.  The molds will be used to make a mouth guard that I can wear while I sleep.  Dr. Steve has a strong suspicion that I am clenching my teeth and the mouth guard will reduce or eliminate the irritation it causes.  I will have to ask if I can wear it during the day too as I am occasionally aware of clenching my teeth while I awake.

I had not heard back from Rick by the end of my appointment so I called the main number at ISRI and talked to the receptionist.  It turned out that Rick was not in today and she transferred me to Jeff Woodworth.  Jeff was willing to meet with me but thought it would be a better use of my time to wait until Rick was available.  My next opportunity to drive to Galesburg will be Thursday and I will likely go as the ISRI seat is holding up our ordering of Flexsteel seats through Coach Supply Direct.

I stopped for coffee and then re-routed for Chuck’s bus garage in Novi.  The key to the garage worked perfectly.  I called Linda to let her know about the change in plans and headed for home.  There is too much to do at the moment to waste much time so I installed the #4 AWG bare copper ground wire I bought yesterday at Lowe’s.  I mounted an offset copper wire lug using the center support stud for the copper back plane in the CEB.  I replaced one of the plastic hole plugs with a rubber plug with a small hole in the center.  The hole I chose in the bottom of the CEB allowed the ground wire to come straight up into the lug.

Another view of the cable entry box on the east end of the house by the 40-foot tower.

Another view of the cable entry box on the east end of the house by the 40-foot tower showing the bare copper ground wire that runs to the ground rod and then to one of the tower legs.

Outside the CEB I routed the ground wire around to the existing ground rod and secured it using the new clamp I bought yesterday.  There was an old ground wire connected from a clamp on the tower to the ground rod.  I removed that wire along with some coax and control wires that I had clipped when we removed the old satellite dish.  I then attached the new ground wire to the clamp on the tower.  While we were at it Linda trimmed back a small bush that was growing between the tower legs and I pulled leaves, grass and other stuff out from around the Day Lilies that we transplanted last year around the tower base.

With the CEB grounded we looked at how we might get a video cable up to the TV/monitor in our bedroom.  The wall where the TV is mounted has a hot water baseboard radiator that comes almost to the trim on the door wall.  That end of the radiator has a copper pipe that goes through the floor into the basement and it was easy to locate the pipe in the basement.  I determined that there was enough space behind the pipe to safely drill a hole but I had to drill it from the top side at an angle.  A 5/8″ wood boring drill bit created a hole just big enough for the molded F-connector on the end of the cable to pass through.

We fed the video coax cable above the suspended ceiling in the ham shack area to the location of the hole.  I then fed the cable up from the basement as Linda pulled it up into the bedroom.  We adjusted the amount of cable in the bedroom to allow the wall mounted TV set to move through its entire range of motion.  The other end of the cable was then routed into the sump pump room.

By the time we finished pulling this cable it was 3:30 PM and time for Linda to leave to pick up Diane.  They were headed to Royal Oak for dinner and a movie as the movie they wanted to see was only showing at the Royal Oak Main Theater.

While I was out during the morning Lynch Carpet had called to let us know our Armstrong vinyl tile was available for pickup so after Linda left I closed up the house and went to get it.  The 12 boxes of tiles, container of vinyl adhesive, and container of vinyl grout were all neatly arranged on a small pallet and tightly wrapped in shipping plastic.  Rather than break this down and load each thing individually they used a fork lift to set the pallet in the back of my Honda Element.  The rear suspension settled at least two inches when they transferred the full weight of the pallet to the floor of my car.

When I got back to the house I backed the car up to the garage.  I cut the shipping plastic loose and unloaded the tubs and boxes of tiles.  I put the pallet on the garage floor and then neatly stacked the boxes of tiles on it to keep them off the floor.  Each box contained 14 tiles measuring 16″ by 16″ for a total area of 24.89 square feet.  The Armstrong Alterna tiles are a “luxury vinyl” product, and are about 1/8″ thick.  Even so, the boxes were heavier than I expected so I decided to weigh one.  It tipped the scale at just under 42 pounds.  That meant the entire pallet weighed close to 500 pounds, and, ignoring the weight of the cardboard box, that is about 3 pounds per tile.

When I drew out the design I determined that I would need 158 tiles, some of which would be partial.  Figuring conservatively at 150 full tiles equivalent, and ignoring the weight of the underlayment, adhesive, and grout, the floor tiles will weigh about 450 pounds.  I have no idea what the carpet and ceramic tile that I have removed weighed but the tiles were heavy.  I also have no idea what the furniture weighed that we have removed but also have no idea what the new furniture will weigh.  The intent was that the new floor and furniture would weigh less than old stuff but we will see.

I traded phone calls with my dad and we finally got to talk for a half hour starting at 4:30 PM.  He turned 90 this past Sunday.  Mike Fearer from Bid-Rite Concrete called at 6 PM and arrived about 10 minutes later to discuss the foundation for our 70 foot ham radio tower.  I had printed off a page from the Universal Tower website showing their tower base.  I also downloaded and printed their base and tower installation instructions.  I had a set of these to give to Mike so he would have some idea of what the project is about.  We looked at the proposed location for the tower and access for his dump cart.  We also talked about the base, a rebar cage, a form around the top of the hole to allow the concrete to be slightly above ground, and a jig to make sure the base is level and the tower is plumb.

He said he was interested in the job and would work with me and Phil Jarrell (the excavator) to get it done.  Rather than bid the job he would just do it for time and materials.  He also said the current price of concrete was about $100 per cubic yard.  We will need about six (6) cubic yards to fill the required 5′ x 5′ x 6′ (deep) hole.  He thought he might be available the middle of next week but I don’t think I could have everything pulled together that quickly.

After Mike left I went to Lowe’s and picked up five 40 pound bags of topsoil, a 1-in/2-out signal splitter (rated for 5 MHz to 2.4 GHz), and a plastic snap cover channel for hiding the video cable we ran up into the bedroom from the basement for the TV set.  I then went to the Meijer’s supermarket just across Grand River Avenue for soy creamer but they did not have what I was looking for.  As long as I was there I had a salad for dinner at the in-store Subway.

While I was sitting there I called Mike Sharpe (W8XH) to confirm that he was available tomorrow to help with the antenna installations on our 40 foot tower.  I mentioned that the only thing I lacked was a standoff with a pulley at the end of it for hoisting stuff up to me.  He suggested that something like that was essential and I agreed, so I headed back to Lowe’s to see what I could figure out.  What I ended up with was a three foot long 7/16-14 threaded rod, a pulley that had a closed eyelet on top (and was big enough for the 3/8ths rope I bought), some 7/16ths washers, and some 7/16-14 nuts.

When I got back to the house I unloaded the topsoil near the part of the east yard that needs to be filled in, took the other stuff inside, and then assembled the threaded rod pulley system.  I secured the pulley on one end of the rod using two of the nuts, one on either side of the eyelet.  I threaded a nut onto the other end, put on two washers, two nuts, two more washers, and another nut.  I ran the first two nuts, with two washers between them, part way down the rod.  I left the second pair of nuts, with washers between them, near the end of the rod.

I took the assembly out to the tower and adjusted the position and spacing of the two pairs of nuts and washers so they would bracket two of the horizontal tower members.  In use I will secure the rod to the tower at each pair of nuts/washers using plastic cable ties.  This arrangement will put the pulley at least 18″ from the tower which should be far enough out that we can hoist the DB8e OTA TV antenna to the top of the tower without it banging into the tower or hanging up on something.  This antenna is the largest thing we need to hoist up. The old TV antenna is considerably larger and heavier, but it is coming down via gravity.

There was a message on our answering machine from Linda’s sister, Sr. Marilyn, who lives in St. Louis.  She was listening to the news earlier today about the storms that went through our part of Michigan and wanted to make sure we were all OK.  By the time we finished talking it was dark and I was done working for the day.  Linda called shortly thereafter to let me know she was on her way home and I mentioned the call with Marilyn.

I finally opened the box with the vertical omnidirectional outside antenna for the cellular booster system and discovered that I should have opened it sooner.  The mounting bracket was designed to be mounted to a vertical surface, such as the side of a house, not a tube, such as a tower leg.  I did not want to postpone tomorrow’s tower work so I will have to get up early and figure out a way to adapt the existing bracket so I can mount the antenna to the top of the tower.

My initial thought was that an aluminum U-channel of the correct size might solve the problem very nicely.  I could drill two holes in the bottom of the “U” to match the two holes in the bracket.  I could then drill three pairs of holes through the sides of the channel.  The antenna would be bolted to the bottom of the channel.  With the open part of the channel held against a vertical tube I could secure it with three long plastic cable (zip) ties.  Conceptually it should work and be easy to fabricate, but will take time which I won’t have a lot of in the morning.  We have to get the two coax cables from Scotty (AC8IL), drop off my car at Brighton Honda for its 100,000 mile service, and be back in time to have the mount fabricated and all of the antennas and tools ready to go by 10:30 AM when Mike shows up.

Linda got home at 9:45 PM, earlier than she thought she would when she left.  She and Diane ate at Luigi’s and had a very nice meal.  They also enjoyed the movie.  We had a big day on tap for tomorrow and we asleep by 10:30 PM.

 

2014/12/21-25 (N-R) The Holidays Arrive

2014/12/21 (N) Winter Solstice

Linda was reading an interesting tidbit online this morning about the winter solstice, which occurs today in the northern hemisphere.  It usually occurs on the 21st, like today, but occasionally slips into the 22nd.  While it is the day of the year with the least hours of sunlight (between sun up to sun down) it is not the day with the latest sunrise (which occurred a couple of weeks ago) or the earliest sunset (which does not occur for a couple of more weeks).  Why is that?  Axial tilt, elliptical orbits, and a “day” that is not exactly 24 hours.  Science is fun.

Today was a stay-at-home / stay-in-town day for us.  Linda vacuumed the coach and mopped the floor tiles.  She says she likes to do this once a week to keep the cat hair under control.  By “likes” I think she means “needs.”  She also decided to do the laundry.  When we are at our house the laundry is usually my chore but for some reason, to which I am not privy, she takes over this chore when we are living in the RV, at least initially.  The same thing happened last year at Williston Crossings RV Resort, although we eventually both did laundry until I was able to win back my rightful chore.  So far again this year it has been her self-selected task here at Quartzsite and I have not gone out of my way to reclaim my rightful place as master of the laundry.

What I did instead of laundry was spend the morning finishing our 2014 Year-in-Review holiday letter.  Linda proof read it and then I converted it to PDF and did a final check of the layout to make sure the text and photos had not shifted or been clipped.  I copied it to a flash drive so we can take it someplace in Blythe tomorrow and have it printed.

The other day I noticed that the manifold pressure sensor (turbo boost) on Butch and Fonda’s 6v92 was mounted vertically on the front passenger side of the ECM.  I could not see exactly how it was mounted, however, so today I finally looked it up in the DD 92 Series manual.  I did not attempt to reattach our sensor module today but I was curious to see what would be involved.  I also continued to interact with other Prevost owners on the Prevost Community forum regarding the turbo boost issues and the dashboard gauge, which does not have the correct scale for our engine.  That thread has led to a dialogue about the SilverLeaf systems, including the VMSpc that we have, and an alternative system from RV Tech Tools that uses an iPad app named “RV Dash” and a wireless (WiFi) interface named “CANpod” from Cubix Labs.

With our various chores done we had a light lunch of chickpea salad on a bed of mixed greens and then went for a long walk.  The walk took us down Washington Ave. and then over to Kitsap Ave. to see a gorgeous Adobe house that Linda had discovered on a previous walk.  That led us to the backside of the west-central “vendor” (flea market) area on the north side of Main St.  We are not collectors, and we are not into antiques, guns, rocks, jewelry, or junk, so we saw very little that interested us.  We did see a few pieces of Pyrex, which our daughter and son-in-law were collecting at one time, and I am always on the lookout for a good deal on a tool I can’t live without, but mostly we saw endless quantities of stuff that we could not fathom anyone buying.

We crossed Main Street and visited the Tyson’s Well Stagecoach Stop Museum.  The grounds and building were open, admission was free, and it was unattended.  There were items for sale and if we had wanted something we would have put the money in the collection box.  That’s small town.

We headed east on Main Street and crossed back to the north side using the crosswalk at AZ-95 (Central Ave.).  We then continued east and stopped at the Road Runner Market.  We were pleased to find that they had a small but good selection of fresh produce.  On our way out the door the florist gave Linda a red and white carnation.  We will definitely be doing some of our local grocery shopping there.  We knew there was a restaurant/bakery on the far east end of Main Street so we kept on walking.  Sweet Darlene’s looked like a nice local place for a home-cooked style meal, but did not have anything on the menu we could eat.  The bakery turned out to be a small display case with pies and sweet rolls, but they did not make their own bread, so we won’t have any reason to come back.

By this time it was getting to be late afternoon, the cloud layer had thickened, and it was getting a bit chilly so we headed back towards Central Avenue.  We counted laundromats along the way, and passed at least four before getting back to our coach.  Not that we need a laundromat—we have a laundry where we are staying—but with all of the boondockers in and around Q it is a matter of some curiosity to us how/where they take care of things like this.  By the time we got back to our coach we had walked just over five miles.

Sunset over the Dome Rock Mountains due west of our encampment.

Sunset over the Dome Rock Mountains due west of our encampment.

By 5:15 PM the sun had slipped just below the mountains to our southwest and the sky started to glow pink for 360 degrees around us.  The sunset went on for over 30 minutes, the pinks deepening to reds.  And then, just like that, the color was gone and darkness enveloped the valley.

For dinner Linda made a simple green salad with raisins and peanuts.  She then heated up some vegan re-fried beans, pan-grilled a package of fajita vegetables she got from Connie before they left, and then heated two tortillas.  We each made a tasty roll up, adding some salsa and vegan sour cream.  She washed some black seedless grapes and set them out for desert.  They were very refreshing after the somewhat heavier and spicy main course.

2024/12/22 (M) Compressed

We had planned on driving to Blythe, California today but those plans changed fairly early in the morning.  Butch got an update that his air-compressor was on a UPS truck in Blythe and scheduled for delivery today.  I had promised to help him with the installation and provide a few tools he did not have with him so we decided to stick around camp.  We were also waiting for Connie’s realtor, Carolyn, to come by and pick up two yellow Post Office slips.

Linda took her morning walk after breakfast while I downloaded the October and November issues of Bus Conversion Magazine in both standard- and high-definition.  I was really glad to finally see these issues.  The October issue included my article on our T. F. Hudgins Spinner II Centrifugal By-pass Oil Cleaner project.  That was my one remaining article waiting to be published.  I have at least a half dozen in process, at least that many more for which I have taken photos (and written blog posts), and a very long list of future projects, so it’s time to get the next batch of articles ready to submit.

When Linda got back I drove to the print/copy/fax/pack/ship/etc. store on east Main Street to see if they could print our holiday letter.  They had plain 8.5×14 white paper, and the photos looked OK, but it was going to cost $4 per letter ($2/side) so I paid for the one copy and left.  They suggested that I try Weeks Printing in Blythe (20 miles west) or Staples in Lake Havasu City (70+ miles north).  Since we will likely head to Blythe tomorrow we will check out Weeks first.

As long as I was out I stopped at Barry’s Breads and bought a couple of fresh “rolls” which were really small loaves of bread.  Barry runs a little seasonal bakery out of a temporary vendor stand on the northeast corner of Central Avenue (US-95) and Kuehn Street.  Most of his products have butter or cream cheese as ingredients—his Danish pastries are as big around as a dinner plate—but he does make just plain bread and everything is made fresh daily.  Back in camp Linda called Weeks Printing and they quoted $1.25 for each 2-sided letter.  Much better.  We will check them out when we make it to Blythe; probably tomorrow.

For lunch Linda made a batch of her scrumptious chickpea salad/spread and served it on one of the rolls I bought at Barry’s.  After a week of cloudy skies, cool temperatures, and a little rain we finally had a day with clear, sunny skies and the high temperature up into the 70s.  Butch decided to remove his defective air-compressor and there wasn’t anything we could do to help (or stop him) so we decided to clean some more of our coach exterior.  I wanted to work from the top down, which meant starting with the roof.  That, in turn, meant getting out the Little Giant convertible extension/step ladder and setting it up as a 14 foot extension ladder.  In this configuration it extends beyond the top edge of the roof at the front, making it safer for me to get up on the lower roof area from the driver’s side.

Rinsing down the roof of the coach (photo by Linda).

Rinsing down the roof of the coach (photo by Linda).

The roof was very dirty and it appeared that we might have more than just embedded dirt to deal with.  The roof has a sprayed-on ceramic-infused white coating with a surface akin to medium grit sandpaper.  It reflects sunlight and provides a nice nap for walking on, but also traps dirt.  The last time the roof was cleaned was in early April, just before we left Williston Crossings RV Resort.  I had been on the roof subsequent to that, in our pull-through driveway at home, using it as a platform for trimming tree limbs.  I do not recall it being unusually dirty at that time, but I was focused on other things.  If it had been, I probably would have washed it, but maybe not; I was focused on other things.

I used a little bit of Dawn dish soap in several gallons of water and our soft, long handle, brush to try and scrub it clean and then rinsed it with softened water.  It was better by the time I was done but far from 100% clean.  I also scrubbed all of the metal awning covers and then hosed them off and rinsed the awning fabric.  When I was done on the roof I sprayed off all four sides of the bus, but even with the softened water it left spots and streaks.  Another unfortunate side effect of this work is that it frightened our male cat, Jasper, who ended up hiding behind the steering column in an attempt to escape the sights and sounds of a ‘monster’ on the roof.

We would like to get the body clean but there’s no point doing anything until I get the roof finished (Linda does not climb ladders and she does not get on the roof of the bus.)  At a minimum I am going to have to use a stiff scrub brush and a stronger solution of Dawn dish soap, or perhaps a commercial cleaner that can treat mold/mildew along with just plain dirt.  We will then have to do the vertical surfaces in small sections, scrubbing, rinsing, and drying as we go.  We have a sprayer for our hose that has a small bottle for additives and one of the reasons I bought it was to try using a dishwasher rinse aid, like Jet Dry, to see if it would eliminate spotting.  To-date, however, I have not tried that.

The old Bendix Tu-Flo 700 air-compressor out of Butch & Fonda's MC-9.

The old Bendix Tu-Flo 700 air-compressor out of Butch & Fonda’s MC-9.  The governor is the silver thing on the left.  The open port on top is the air discharge where the unloader valves are located.

Once Butch had the old air-compressor out of their bus he turned the input shaft and noted that the pistons were not pumping air.  This confirmed that something had failed internally and ordering a replacement was the right thing to do.  There wasn’t much else to do so we all sat around in the warm sun and waited for the UPS truck to show up, which it finally did around 3:45 PM.  We (me, Linda, and Fonda) suggested that Butch wait until tomorrow to start installing it, but we knew that was not going to happen.  The compressor was a significant road failure that had bugged him since it happened and he was anxious to get it fixed.

 

The new (re-built) Bendix Tu-Flo 700 air-compressor with the old spline and new port plugs.

The new (re-built) Bendix Tu-Flo 700 air-compressor with the old spline and new port plugs.

The Bendix Tu-Flo 700 he received is designed specifically for mounting on Detroit Diesel 92 series 2-stroke engines but has more ports on it than are typically used in this application.  Making sure to match the configuration of the old compressor, Butch installed new plugs in the unneeded ports.  He then removed the fittings from the old unit one at a time and installed them in the new one, being careful to line them up exactly the same way.  I helped by holding the compressor on a work table while Butch tightened the pipe threads.  This was the easy part of the project as we were standing at a tall bench with plenty of room to work and good light.

 

The new air-compressor with fittings.  Note the alignment marks for orienting the fittings correctly.

The new air-compressor with fittings. Note the alignment marks for orienting the fittings correctly.  The spline is in the upper left of the photo.

The hard part was getting the air-compressor re-installed.  Butch eventually got it onto two of the four mounting studs, which then took the weight.  We discovered a clearance issue with one of the port plugs and he had to pull the compressor back out.  He removed a plug from the old compressor, which did not stick out as far, and reused it in the new compressor.  With the compressor back on the studs it now lined up better but the spline would not engage the drive gear on the end of the engine camshaft.  He put a wrench on the crankshaft pulley nut and turned the engine slightly by standing on the end of it while I jiggled the air-compressor.

The "governor" mounted on the new compressor.

The “governor” mounted on the new compressor.

The spline eventually engaged the engine gear and the air-compressor gear enough that Butch was able to fully seat the flange and insert/tighten the four mounting studs, lock washers, and nuts.  Per the instructions, he reconnected all of the lines except for the air discharge and called it a night.  The coolant goes back in tomorrow and Butch will then start the main engine to make sure the compressor works, check for leaks, and let any contaminants get blown out the discharge fitting.  If everything looks good he will attach the discharge line, which connects the outlet port of the air-compressor to the coach air system, and air up the bus.

The new air-compressor (blue) mounted on the rear of the engine block (towards the front of the bus).

The new air-compressor (blue) mounted on the rear of the DD6V92TA engine block (towards the front of the bus) in Butch and Fonda’s MCI MC-9B NJT.

At least we were successful in convincing Butch to wait until tomorrow to put the coolant back in the engine.  By the time we finished working, put our tools away, and got cleaned up it was 7:30 PM and had been dark for two hours.  Linda reheated the leftover fajita fixings and we had open-faced tortillas with Fritos corn chips, salsa, black grapes, and Sangria.  We were both tired so we relaxed for a while after dinner and then went to bed.

2024/12/23 (T) Blythe, CA

We got a call from Connie right after breakfast letting us know that the two packages Carolyn picked up yesterday were for us and Butch.  We needed to pick them up before 11AM as Carolyn had an appointment at that time.  Linda was headed out for her morning walk anyway so she walked to Rock Reality, near the post office and uptown drugs, to get the packages from Carolyn.  (Carolyn is Joe and Connie’s realtor.)  She dropped off the two P. O. Box – Mail Pickup Notice cards at the post office while she was there.

Our package was from Madeline (Brendan and Shawna), to be opened on Christmas Day.  Butch’s package was the unloader valve kits for our Bendix Tu-Flo 700 air-compressors.  He ordered them while we were in Forest City, Arkansas for delivery to Amarillo, Texas but they did not arrive in time so his friend forwarded them to our Quartzsite location.

Butch and Fonda used most of the morning to put the coolant back into the engine.  Our buses, which still have their over-the-road heating systems, hold a lot of coolant.  Ours requires 34 gallons.  The buses are not identical, but I suspect theirs requires at least 30 gallons.  And it is very important that the cooling system is filled to capacity and has had all of the air purged out of it.  It’s a big, messy job.

They got as much in as they could by standing on a ladder and pouring it through a funnel into the filler tube for the surge tank.  The radiators on the MCI MC-9 are located above the engine, one on each side wall at the rear of the bus, and the surge tank is located above them, so the filler tube is approximately 9 feet from the ground.  Butch started the engine to warm it up enough for the thermostat to open and to circulate the coolant and opened a couple of bleeder valves to let air out.  He also checked the outlet fitting on the new air-compressor to verify that it was pumping air.  It was (hurray!), so he shut the engine off, attached the air line to the outlet fitting, and started it back up.  The chassis air system (suspension and brakes) came up to pressure and the air-dryer “sneezed” (momentarily opened its purge valve) so the system was fully operational.

We planned to go to Blythe, California today and Butch and Fonda wanted to go too, so he shut off the engine and they cleaned up their campsite.  We were sitting in our coach when the winds came up rather strong.  Linda checked the weather and the winds were out of the north at 20 MPH and forecast at 22-25 MPH until 6 PM.  That was strong enough for us to retract our awnings, close our roof vents, collapse our folding chairs, and stow our patio mat.  Butch and Fonda also retracted their patio awning and stored all of their outdoor equipment and furniture.  We had the old patio awning on our Itasca Sunrise torn off by strong (thunderstorm) winds while we were away from the motorhome and have been extra careful about awnings and wind ever since.

With all of that done we headed to Blythe in their Chevy Suburban.  From 879 feet ASL in Q we climbed to about 1200 feet ASL over the low mountain range that separates the two valleys, and then descended to 240 feet ASL as we crossed the Colorado River and entered California.  A few miles later we took the 7th Street exit and we were there.  The 20 mile drive was only five more miles than the trip we made from Williston Crossings RV Resort to the Publix grocery store (at the southwest corner of Gainesville, Florida) last winter, so it did not feel like a long way to go for groceries.  At home we have supermarkets about five miles away in three different directions.  Butch and Fonda typically drive into Logansport for their groceries, a distance of 12 miles, so we are all used to traveling some distance to purchase our food.

The Smart & Final Extra and the Albertson’s were on the NW and SE corners of 7th and Hobsonway, just north of I-10, making them especially convenient for us, so this is where we will likely shop every other week or so.  But our first destination was a few blocks farther west on S. Main St. where we found Weeks Printing.  They were eventually able to access our flash drive and open the PDF of our holiday letter.  They had a high quality paper in 8.5”x14” size, and were able to print our letter 2-sided on a good quality color laser printer for a very reasonable price of $1.25 per letter ($0.625 per side).  They did not take credit cards so we paid cash, but it saved us a 73 mile trip (one way) to Staples in Lake Havasu City.

Self-portrait of the blogger.  I am merely a reflection of my former self.

Self-portrait of the blogger. I am merely a reflection of my former self.

At the Smart & Final Extra we bought fresh produce, soy milk, and some bulk, canned, and packaged items.  They did not carry the Silk brand soy coffee creamer that I like, and there were a few items Butch and Fonda needed that the store did not have, so we drove across the street to Albertson’s and got those items.  I stayed in the car with the groceries, but I already knew that the Albertson’s would be a nice store based on our experience with the chain in Sheridan, Wyoming during summer 2013.  With our shopping done we returned to Quartzsite.

I carried the groceries from the car to the bus and Linda stored them, discovering that she had an empty tub available in the cabinet above the refrigerator.  By the time she was done it was approaching 4 PM so she prepared chickpea salad sandwiches as a quick, light lunch and then announced that we should go for a walk before it got dark.  She let me chose the route so we crossed Central Avenue (AZ-95) and walked to the city park, which has a very nice baseball field with lights and the only grass we have seen in Quartzsite.  There was also a skateboard facility, a football field, and two F4 Phantom jets (minus the engines and other equipment).  The Quartzsite Metal Detecting Club (QMDC) has a practice field adjacent to the park.  The park is located near the following municipal facilities:  Community Center and Library, County Court, Police Station, and Post Office Annex (where most of the P. O. Boxes are located).  The Fire Department is a little farther north on Tyson Wells Street just east of Central Avenue.

The sun was getting near the tops of the mountains to our southwest so we headed pack to our coach and settled in for the evening.  For dinner Linda made a barley risotto with garlic, shallots, mushrooms, sun-dried tomatoes, vegetable both, and seasonings.  While she was cooking I got a call from my dad and got him caught up on our whereabouts and activities.  The risotto was excellent and we each enjoyed a glass of sangria with our meal.

I don’t know if we are just relaxed, or really tired after a hard summer and fall, but we have both been going to bed earlier and waking up later than usual.  Or perhaps it is just the effect of fresh air and sunshine.  Whatever the reason, it’s nice to be able to just sleep when that is what we feel like doing and get up when we are read.

We have an excellent Verizon signal here in Q.  Linda often likes to pace up and down Lollipop Lane while talking on the phone.  If you lived on Lollipop Lane you would too.

We have an excellent Verizon signal here in Q. Linda often likes to pace up and down Lollipop Lane while talking on the phone. If you lived on Lollipop Lane you would too.

2014/12/24 (W) Christmas Eve

It’s Christmas Eve and we woke to a temperature of 37 degrees, clear skies, light winds, and no snow.  The forecast high for today was 66, with no snow.  Do I miss snow at the holidays?  Not really.  At one time (high school) I considered myself something of a “romantic” in the sense that I liked the classical music of the romantic era, but I am not particularly nostalgia.  If I was, we would own a restored 1957 Chevy; red, of course.  No, we had snow at home before we left and as a harbinger of things to come we took it as a sign that our departure was overdue.  Christmas in the desert will be a new experience for us, but so far it looks very agreeable.  We will miss being with family, of course, but we are not alone here and technology keeps all of us much more connected than it once did.

Having been to Blythe yesterday we did not have any last minute shopping to do today.  The desert was there yesterday and will be there tomorrow (I presume) so we did not have to see it today.  With the holidays upon us I did not feel like working on bus projects.  Linda started addressing the envelopes for our Year-In-Review Holiday Letter and then worked on food preparations for tomorrow’s dinner with Butch and Fonda.  It seemed like a good day for me to finally start catching up on some things that I have not had time for in a while.  For instance, I need to work on articles for Bus Conversions Magazine, update our bus project list/status, update our website, upload some blog posts (OK, a LOT of blog posts), and catch up on the blogs I follow using the Feedly app on my iPad.  I am way behind on all of these tasks and starting to feel some pressure about it, albeit self-imposed.  I do not have to do any of these things if I don’t want to, of course, but they are activities that I enjoy and want to do.  Still, being way behind takes some of the fun out of it and makes it a bit more like work.  I won’t get caught up in one day or one week or even one month; it will take many weeks of persistent effort.

After checking e-mail, I settled in to work on my article about the exterior renovation of our motorcoach.  Michele Henry of Phoenix Paint helped me finish the article in early October but I still needed to select and caption all of the photos.  While I worked on that Linda walked to the Road Runner Market and managed to snag the last 3-pack of yeast.  When she got back she made her orange cranberry relish for tomorrow’s dinner.

We took a break for lunch and then Linda headed out for her daily power walk.  When she got back she continued addressing envelopes for our holiday letter.  Just as I was feeling like I needed a break, Butch knocked on the door to let me know he was working on a small project that might interest me.  He had already burped the coolant lines that supply heat to the living area of their bus when driving and gotten the last of the coolant into the system.  His new project was getting an alternator driven tachometer connected and calibrated.

It turned out that he needed positive DC power to the tachometer in addition to the ground and RPM signal.  He was able to temporarily pick up 24VDC from the positive terminal of the starter, found a convenient ground point, and picked up the rotational speed from the stator terminal on the back of the alternator.  With the engine running at low idle he measured the RPM of the main crankshaft pulley using an optical sensor instrument.  It was just over 600 RPMs so he adjusted the tach via a set screw on the rear to match the reading.  He kicked it into high idle and measured the rotational speed as 950 RPM.  That is what the tach displayed within the precision of the markings.  He already has a signal wire run from the engine compartment to the cockpit but needs to mount the tachometer in a separate bullet housing, connect the wire on both ends, and provide positive and negative (ground) DC to the instrument.  He decided not to take on that project today.

(Note:  RPM is universally understood to be an abbreviation for “Revolutions Per Minute” but that is not necessarily correct.  An object such as the pulley on the end of an engine crankshaft rotates about its own axis, just as the earth does, and has angular velocity which is properly measured in rotations per some unit of time or angular displacement per some unit of time.  The abbreviation is, of course, still RPM.  In the case of the pulley, however, Butch put a small piece of white tape on the face of the pulley at the outside edge to act as a target for his optical sensor.  If we consider the piece of tape as a separate object then it does, indeed, revolve around the center axis of the pulley, just as the earth revolves around the sun.  Viewed thus way, revolutions per minute is technically correct.  As with many things in physics, it depends on your frame of reference.  So much for today’s physics lesson.)

This building houses (L-2-R) the laundry room, the apartment, and a small workshop.

This building houses (L-2-R) the laundry room, the apartment, and a small workshop at our compound.

As long as I was outside I borrowed Butch’s metal detector and went in search of a couple of tie downs that Joe told us were buried somewhere near the outer edge of our patio awning.  I knew they were lined up with a reference mark on one of the concrete patio slabs and it did not take long to locate and uncover them.  We put a couple of medium-sized rocks on top of them so we could relocate them easily.

We got several multimedia messages from our son today with pictures of our grand-daughter at our daughter’s house helping make cookies.  Brendan, Shawna, and Madeline are spending the night and Katie is joining them tomorrow.  Butch and Fonda will spend most of the day at the local church Fonda selected, including a carry-in (pot luck) luncheon, but will have dinner with us around 6:30 PM.

I finally returned to our coach and worked on my article about the Zena power generating system I installed to charge our house batteries while driving.  Again, the article was mostly finished a long time ago, but I could not submit it until I completed the installation, got the system operational, and took a few more photos.  All of that happened in October and November but I was too busy with other projects and preparations to pull it all together at that time.  I had a couple of e-mails today from Gary, the publisher of Bus Conversion Magazine, indicating that the December 2014 issue might not be out until early January 2015, and wondering if I might have a finished article they could use.

For dinner Linda made a salad of dark mixed greens with raisins, nuts, and pear slices drizzled with raspberry walnut vinaigrette dressing followed by pan-seared tofu slices with caramelized onions and bar-b-que sauce served open-faced on hamburger buns.  We split a Sam Adams Pumpkin Spice Ale.  I am not a big fan of ales or pumpkin but beer seemed like the right beverage for this dish.  It was OK, but I would have enjoyed a Yingling or Shiner Bock more.

I made good progress on both articles today.  I got an e-mail from Mike, the editor of BCM, wondering if I had a finished article.  The ZENA article was close enough that I decided to finish it and upload it to our Dropbox before going to bed.  I e-mailed Mike back to let him known it was there and offered to finish the other one by the end of the weekend.

Earlier in the day I updated our personal WordPress site to the just released version 4.1 and updated several plug-ins and themes.  My last task before turning in for the night was to replicate the update process on the other three sites I manage.  By the time I got to bed it was Christmas Day.

2014/12/25 (R) Christmas in Q

The wind came up strongly overnight and we were awakened by the rattling of the vent fan domes.  From our north facing bedroom window we could see flags and the tops of trees blowing briskly in the wind.  We could also hear and see the awnings on the south/passenger side of the coach flapping.  Linda checked the weather channel app on her iPad and it reported winds at 20 MPH.  We were not expecting winds that strong until the daytime and they were strong enough for us to be concerned about our awnings.  By that point we were wide awake so we put on our sweatpants and shirts, slipped on some shoes, found a set of keys, got the step-stool out of the front bay and the awning rod out of the folding chair bay, retracted the two awnings, returned the rod and step-stool to their respective storage compartments, and finally went back to bed.

Linda got up at 6:30 AM in order to start making cinnamon rolls from scratch.  I usually get up first and make a pot of coffee but I was up past midnight working, so I slept in for another hour.  The yeast she bought yesterday wasn’t cooperating so we turned on one of the Broan ceramic cube heaters to try and create a warmer and more consistent environment to get the dough to rise.

We borrowed Butch and Fonda’s Verizon MiFi (unlimited data plan) so we could Facetime with our children and their families, who were gathered at our daughter and son-in-law’s house.  We got to watch all of them open the presents we left for them when we were there on Thanksgiving and they got to watch us open the gifts they sent with us or shipped to us here in Quartzsite.

Brendan, Shawna, and Madeline (son, daughter-in-law, and grand-daughter) sent a 2015 Shutterfly Calendar with photographs of all the different family members placed on the dates for birthdays, anniversaries, and such.  We do not need much at this point in our lives, but a collection of photographs that also reminds us of the people and dates that are most important to us is something we appreciate and treasure.  Meghan and Chris (daughter and son-in-law) bought us each a genuine Tilley hat.  I have known about these hats for a while but never bought one.  Given our outdoor oriented RV lifestyle, these were excellent gifts.

After we were done with our Facetime session Linda took the cinnamon rolls over to the apartment to bake since it has a range with an oven.  She will finish cooking dinner there later and the four of us will eat there this evening as it has a table that will seat four people.

The apartment bedroom.

The apartment bedroom.

In spite of early indications to the contrary the cinnamon rolls rose and baked just fine. The dough used flour, salt, vegan butter, yeast, and flax meal with water (egg substitute) and a little sugar.  The filling was made with brown sugar, vegan butter, cinnamon, and maple syrup.  The topping was a glaze of sugar, water, and vanilla with raisins and chopped walnuts.  Linda took two of them over to Butch and Fonda and we had some for breakfast still warm from the oven.  It’s a good thing that these are as much work to make as they are or I might want them for breakfast every day.   🙂

Linda had a call and TXT message from her sister (Marilyn) and sent a reply.  She was on her way to her housemate’s family gathering and they agreed they would talk later today.  She also sent merry Christmas TXT messages to her sister-in-law, Mary, and good friend, Diane.  At noon our time (1 PM CST, UTC-6) I called my sister to wish her a happy holiday.  Her daughter, grand-daughter, and future son-in-law had already been there in the morning as Ryan had to work that afternoon.

I made a second pot of coffee, which is unusual for us, but we planned to spend the day lounging around the coach cooking (Linda) and working on the computer (me).  Linda cleaned up the breakfast cookware, poured another cup of coffee, and started working on the chocolate cake for tonight’s dessert.  With the cake prepared and in the apartment oven she turned her attention to making the candied yams.  Once those were done the only thing left to do was bake the Tofurkey, roast the asparagus, and heat the gravy.  It was a lot work for her but it was spread out over two days and she enjoyed, and did it, willingly.  We could have gone out for dinner if she wanted, even though we would not have found much we could eat, but I am glad she preferred to cook.

Once I wrapped up the conversation with my sister I got back to work on the Outside Makeover (Exterior Renovation) article.  Although I thought I was done writing I made a few more edits and selected additional photos.  By 5 PM I had 74 photos selected and placed in sequence to match the flow of the article.  I had also done as much of that work as I cared to for the day.

We were down to 1/4 tank of fresh water so I decided to refill it.  About that same time Linda decided it was chilly enough in the apartment that she wanted the propane space heater turned on so I shut off the water and took care of that.  The heater had a hose that went through the wall at floor level to the outside with a regulator and POL fitting on the end of it.  I found a couple of 20 lb. propane tanks in the workshop and connected one of them to the regulator.  It took a while but I eventually got the pilot flame to light and then got the heater to ignite.  I then went back and finished filling our water tank.

The little apartment is very cute with three rooms: a bathroom on the east end, a bedroom on the west end, and a kitchen/dining/living room in the middle.  It has a shower, a 4-burner electric range with an oven, a refrigerator/freezer, a small microwave oven, the aforementioned space heater, a small window air-conditioner, a small TV/monitor with a satellite receiver, two easy chairs, a small dining table with four chairs, and a queen sized bed.  Marilyn is seriously considering coming for a visit the last week of January and if she does she will stay in the apartment and get to experience Quartzsite.

Linda starting to set the table in the apartment for Christmas dinner.  No pictures of Butch & Fonda (they are camera shy).

Linda starting to set the table in the apartment for Christmas dinner. No pictures of Butch & Fonda (they are camera shy).

We bought a bottle of Sternthaler Nurnberger Christkindles Gluhwein spiced red holiday wine at Central Market in Fort Worth, Texas to serve with our Christmas dinner.  It is a mulled wine that is supposed to be gently heated before serving, but we found it quite agreeable straight from the refrigerator.  About 20 minutes before dinner time we set it out on the counter to warm up slightly, the space heater doing a very effective job heating the small apartment even on its lowest setting.

Linda and Fonda both contributed dishes to the meal and Fonda made a couple of things that we could eat.  They brought chicken and traditional mashed potatoes for themselves but also tried some of the Tofurkey roast.  Linda made a vegan chocolate cake for dessert and whipped refrigerated coconut milk solids to use as a whipped cream substitute.  Our daughter did this for the Thanksgiving meal and we really liked it.

We sat in the apartment for a long time after dinner and just talked until we were all tired.  Linda and Fonda had already cleaned the dishes so we turned off the propane space heater and carried all of our stuff back to our coaches.  Linda put the leftovers away while I did a final check of my e-mail for the night.  I then shut my computer off and we headed to bed.  Like so many things in our retirement RV lifestyle, this Christmas holiday was a new and good experience.

 

2014/08/12 (T) Popcorn And A Movie

It rained long and hard all day yesterday and into the evening past bedtime.  Today brought more rain, though not as hard and not quite as persistent.  Although we have low spots around our yard that turn into small temporary ponds when we get this kind of rain we are not in an area that is prone to flooding.  That’s because we live just south of the boundary between two watersheds–the Huron River to the south and the Shiawassee River to the north–so water tends to flow away from here, eventually.

Phil (Best Precision Grading) stopped by around 10:30 AM to look at the pull-through driveway he built for us last year.  He said it looked solid enough to drive the bus on it, but was obviously no longer level and had a low spot in front of the new front stairs.  He will need a half day and a small load of 21AA road gravel to repair the damage done by Village Landscape Development while building our front stairs and sidewalk.  The cost won’t be too bad (although it shouldn’t have cost us anything) but getting him to find the time to come do it could be a challenge.  He’s had a busy summer and suffered the same delays as other contractors who do outdoor work due to the wet spring and summer we’ve had.

He was also here to see the work Village Landscape Development had done.  He agreed that the hardscape work looked good but the grading in the rear did not look right and the tracks in the yard from the equipment had not been raked out properly.  He suggested I let the grass grow in and the ground dry out before assessing whether anything needs to be done.

He also looked at the west end of our property, which sits lower than the east end where the house is located.  The timing of his visit was good as all the low-lying areas had water standing in them, allowing him to see clearly the exact nature of the (lack of) drainage problem.  His suggestion was a “French drain.”  Basically it’s a trench that is shallow at the far/high end and gets deeper as it goes towards the place where the water needs to end up.  Plastic drain tile, the kind with perforations and a nylon “sock” covering, gets laid in the trench and then the trench is filled to grade with pea gravel.  The dirt that came out of the trench gets spread around to cover the pea gravel and blend in to the undisturbed soil on either side.

When completed, the drain would take all of the standing water plus much more out of the surrounding soil and allow it to flow to a culvert that runs to the southwest under the road just west of the culvert along the side of the road that will eventually be the entrance to our bus barn driveway.  A French drain is cheaper to build than hauling in large truck loads of top soil and re-grading that part of the yard.  We probably should have had Village Landscape make a French Drain around the two plastic drain lines they ran out into the yard from our basement walkout.  Oh well, “can’t should‘a done it.”

We had tofu hot dogs for lunch and then Linda left to meet up with Diane to see a movie (Boyhood) and then go out to dinner at Bahama Breeze.  I stayed home and worked at my computer, taking a break mid-afternoon to make popcorn.  The worst weather of the day was happening at that time, so I stayed upstairs for a while and read the new 2nd edition of The Mobile Internet Handbook that I had just downloaded this morning.  I worked until 7 PM and then stopped to have a light dinner consisting of chickpea spread on whole grain toast and half of a small watermelon.  Linda got home as I was finishing my watermelon.

In spite of AT&T switching our phone and DSL service to all new wire pairs our Internet service went out occasionally throughout the day and evening, although it usually returned quickly.  I think the sad truth is that their landline infrastructure is not as tolerant of wet weather as it should be and most of their money is going into expanding cellular service.  We had the same problem over the years at our house in Farmington Hills.