Tag Archives: Best Buy (Brighton MI)

2015/05/05 (T) BAF & MEF3 Visit

Today was a family visit day.  We were up a bit earlier than usual and enjoyed a light breakfast and a quiet first half of the morning.  One of the things I’ve had on my to-do list is ordering Touch of Oranges Wood Cleaner and Touch of Beeswax Wood Preservative.  I finally got those ordered today directly from the company with free ground shipping.  I checked Amazon but the prices were no better and the products were not eligible for Amazon Prime.  I also found what I think is an exact replacement for my iPad2 flip cover and put it in our Amazon shopping cart.

Our son (Brendan) and grand-daughter (Madeline) arrived around 10 AM.  Madeline knows her way around the main floor of our house at this point and headed directly for the pantry to see what snacks we might have.  We tend to have dried fruit on hand, especially raisins and cranberries, as a tasty but healthy choice.  She is very fond of dried cranberries.  We spent the morning playing and talking and having a drawn out snacky lunch.  Somewhere in there Brendan setup the Pack-n-Play.

Pat Davidson from Apex Roofing showed up around noon to look at our roof and give us a quote.  Apex has done two roofs for us on the previous house and did excellent work at a fair price both times.  The quote was about what I expected and I gave Pat the verbal go ahead to put us in the schedule.  They are scheduling out about six weeks, so mid -June looks like the timeframe.  That potentially runs into the SKP Tri-Chapter Rally or the ARRL Field Day, as well as bus and bus barn projects, so we will have to see exactly where things fall.  We like to be around while this sort of work is going on.  This time, however, I also need to build a dormer on the back side of the roof to provide better access to the attic, generally, and the air-conditioner evaporator/air-handler, specifically.

The quote is for a new roof, with new underpayment and ice shield, so it is a “tear off” where they first remove all of the old roofing and repair any damaged/missing roof decking or boards.  They always look for at least a three day window with a dry weather forecast.  Pat said they would work with me relative to the dormer.  Specifically, they would start the tear off in the area where I want to build the former and then move to a different part of the roof so I can do the carpentry.  Linda and I need to visit ABC Supply Co. in new Hudson to pick out the specific shingle we want, and we plan to do that sooner rather than later.

The dormer is simple in concept but a bit trickier in execution.  I would build two tapered walls on the ground that look like right triangles.  The hypotenuse would attach to the roof with the long leg on top and horizontal and the shirt leg facing out and vertical.  Joists would be installed across the two walls, tying the together.  The front wall would be framed for an access door between the two short legs.  Two rafters would be installed at the end wall.  The ridge board would be set in place and cut to tie into the roof.  Two backer boards would be installed on the roof running at an angle from the ends of the side walls up to the ridge board.  The rest of the rafters would then be installed.  The walls and roof would then get plywood sheeting and decking.  The final carpentry would be fascia boards and siding.  Fortunately we have a pile of Hardy Board left over from when the house was sided.  Hopefully there is enough to side the dormer and it is in good enough shape to use.  I would then install the door, which I might have to build.  Apex would then roof the dormer, including continuous ridge venting.  The final steps would be painting the door and door trim and installing fascia and vented soffit material to match what is already on the house if I can find a supplier.  We would like the dormer to blend in and look like it belongs there.

Brendan got Madeline down for her nap at 1 PM and then spent a little time looking at what we plan to do with the floor in the bus before heading back to Ann Arbor.  I gathered up the Armstrong vinyl floor tile samples and drove to Lynch Carpet in Howell to return them and see what else they might have.  Clint let me keep the one we like for a couple more days and gave me a grout color chart.  I then headed to Best Buy in Brighton to pick up a Sony Blue-Ray/DVD player and a couple of flash drives, all of which were on sale.  I stopped for gas and got back to the house just as Madeline was waking up from her nap.

I was able to spend a little time researching a potential new vehicle.  As much as we are enamored with the Jeep Wrangler Unlimited the Consumer Reports data on them is very discouraging, especially the reliability data.  Viable alternatives may be the Nissan Frontier Pickup Truck or the Nissan Xterra SUV, both of which are available in 4×4 configurations.  Even the Ford F-150 might be a possibility as it is available in a 4-door, short-bed, 4×4 version.  They all have much better CR reliability data that the Jeeps.  The problem is, they are not Jeeps.  If we can wait a year, Ford is releasing an F-150 Raptor in fall 2016 that will feature a 10-speed transmission with six selectable driving modes including rock, mud & sand, and Baja (high speed desert racing).  It will probably also feature a ridiculously high price, but then none of these vehicles are inexpensive.

We got a phone call from XPO around 4:20 PM to let us know they would be delivering our box spring mattress foundation around 5 PM.  They showed up right on time and carried it to our bedroom.  Linda signed the delivery slip and they were gone as quick as they arrived.  We will wait until Brendan retrieves Madeline tomorrow to disassemble and reassemble the bed.

I entertained Madeline while Linda prepared dinner, but Madeline was very interested in what her Grandma Linda was doing, so we kept going to the kitchen to check on the work.  Linda served some “mock” chicken tenders, but she also fixed fresh green beans and homemade mashed potatoes, reheated some frozen edamame, and set out fresh black grapes and pineapple chunks.  Madeline is a good eater and we all enjoyed our meal.

Madeline is “potty trained” and very proud of the fact that she is no longer wearing a diaper.  She had a very successful day letting us know she needed to use the toilet.  We have a booster ring for the hall bathroom and put a stool in there for her.  She uses the stool to get up in the toilet seat and then uses it to stand up at the sink and wash her hands.  The hall bathroom sink/counter is lower than normal and turns out to be a great height for Madeline with the use of the stool.

We played after dinner until Madeline was tired.  She has always been comfortable staying with us but at 29 months of age is starting to have some anxiety about being away from her parents.  She wanted her daddy, and was briefly a little bit teary, but it wasn’t anything Grandma Linda couldn’t handle.  Linda followed the usual routine of looking at the rug (wall art) and all of the pictures in the hallway, the small bedroom, and finally the middle bedroom where Madeline’s Pack-n-Play is set up.  She selected the Construction Kitties book (again) for a bedtime story.  It was one of the books we got from the library yesterday and was her favorite choice all day today.  She fell asleep easily as she usually does.  We are active, busy people, but it’s a different kind of busy from having a 2-year old in the house.  We were tired, and turned in about an hour after our grand-daughter, but it was a good kind of tired.

We were so busy today that we failed to notice that it was Cinco de Mayo until it was almost over.

 

2014/05/05 (M) Towering Heights

It dropped into the upper 30’s early this morning.  Although I did not really want to go outside and work, it was the perfect time to adjust the pressures in the bus tires and reset the baseline pressures on the Pressure Pro TPMS.  I had a 10 AM service appointment for my car and wanted to take care of the bus tires before the air temperature warmed up or some of the tires sat in the sun.

I took the Honda Element to Brighton Honda for the 85,000 mile service which consisted of an oil change and multi-point inspection.  A quick trip to Best Buy to look for a case for my new ASUS laptop computer did not result in a usable case but I did discover a new Logitech mouse, the T630; very thin and stylish but unfortunately not in stock.  They printed out a sheet for me to take along.

I called Wayne (KD8H) and arranged to go see the Heights Tower he had for sale at 2 PM.  Mike (W8XH) came along to help me inspect it.  Mike has a Heights Tower so he is very familiar with them.  The tower was already down and disassembled into sections that were stored horizontally on saw horses.  The fold-over mount (FOM) was made of steel rather than aluminum and was rusty but very substantial.  Wayne had the motor for the FOM but no longer had the threaded rod.  The top tower sections had the mounting plate for a Ham II rotator and the bearing plate for the rotating mast.  He also had the Ham II rotator, and was willing to include that in the deal.  I wrote him a check and arranged to come back later in the week with a truck or trailer to pick everything up.  After I dropped Mike back at his QTH and returned home I e-mailed several SLAARC members to see if they might be have a truck and/or trailer and time to help me retrieve the tower parts.

I had been doing research on cases for the ASUS G750 series (ROG) laptop computer and found two on Amazon Prime from Everki that looked promising as they were designed to hold up to an 18.5 inch (diagonal) computer.  The Advanced was a padded top-load zipper case with a slender front zipper pocket.  The Lunar was also a padded top-load zipper case but had a larger zippered front pouch and a slender zipper pocket in front of that.  It also had a slot across the back that allowed it to be placed over the extended handle of a roller case.  The Lunar was 3x the price of the Advanced, but the Lunar looked like it would better accommodate the AC power adapter and other accessories I tend to haul around.  I had checked the ASUS ROG forum (Republic of Gamers) previously and the general opinion was that these two cases were both of good quality and big enough to hold my computer and related stuff.  I ordered one for delivery on Wednesday (2-day), no extra charge with Amazon Prime.

 

2014/05/02 (F) A Day At Home

Linda went into the bakery today so she was up early and left at 6:30 AM to get ahead of the worst of the morning rush hour traffic headed into Detroit from the northwest.  She took my new laptop to have some critical software installed.  With the 17″ screen, the computer does not fit in any of our existing padded carry cases, so that is an accessory I will need to get.  I also have my eye on an external BluRay/DVD/CD optical media drive (read/write).  The BluRay disks will store anywhere from 25 to 45 GB of data which is more practical that CDs or DVDs for non-volatile /off-site storage of photographs and critical documents.

We only have one car at the moment, so I was stuck at home today (I don’t use the motorcoach to run errands).  Being stuck at home on a chilly, overcast, rainy day is not necessarily a bad thing.  After a light breakfast and my morning coffee I started a load of laundry and worked at my desk for a while.

I took a break from desk work and opened the front of one of our APC Smart UPS units that had died while we were away.  I had replaced batteries in a couple of these units but could not recall if this was one of them.  It was not.  When I opened the batter compartment I found the batteries badly swollen and I was unable to remove them from the case.  The tags on them indicated that they were from 2010.  The only thing I can think of that would have caused this was a failure in the battery charging circuit which continued to charge the batteries after they were already fully charged.  That would cause them to gas and swell as they are sealed AGM batteries.  We were probably lucky they did not explode.  Given this situation I will replace the whole UPS rather than put new batteries in it.  APC usually offers a trade-in allowance (called Trade-Ups) for the same or larger UPS.  Otherwise I have to dispose of the whole thing as electronic hazardous waste.

Steve Degenais of Village Landscape Development stopped by mid-morning to discuss two separate projects:  1) stairs to get from the pull-thru driveway to the front porch, and;  2) redoing the retaining walls on either side of the basement walkout.

When we bought the house last year it had a makeshift pull-thru driveway and no stairs or pathway to the front porch, which is the main entrance to the house.  The previous owners used the Florida room, which is just an enclosed patio slab between the house and the garage, as an entry/breezeway.  It was empty and they left it unlocked, entering the house through a door to the kitchen that locked.  We use the Florida room as a library, so we do not leave it open.  We also had the pull-thru driveway substantially improved last spring so we can park our bus with the entrance door opposite the front door of the house.  Carrying things back and forth between the house and the bus on a steep grassy slope is an accident waiting to happen.  There is a four foot drop in 18 feet from the front porch to the driveway and we need a proper set of stairs.

Although we have a walkout basement, the house is not set into the side of a hill.  If you walk around the house it appears to sit on top of a mound.  It appears that dirt was piled around the basement walls, except by the walkout, and graded away from house, more or less.  In the back it slopes in towards the walkout.  There are remnants of an old railroad tie retaining wall and it appears that sometime later someone tried to stabilize the two slopes with plastic held in place with small boulders, pieces of cinder block, used bricks, and whatever else was handy to throw in there.  That apparently wasn’t working very well so they built two retaining walls, each about seven courses high (~3 ft), with blocks meant for decorative edging of plant beds.  It’s also clear that they did not make any provision for water drainage behind the walls and yet two downspouts from the roof gutter system discharged into these areas before I used corrugated plastic pipe to carry the water away from the house.  The pipes are still there, sitting on the surface right where I put them last spring. The earth behind the walls has obviously moved over time and the walls are buckling in places.  Mud pushes through and around them.  It’s not pretty on several levels.

Our sump pump runs quite a bit in the spring and we need to get rainwater away from the foundation as much as possible.  Drainage and stabilization of the slopes are my primary concern but I always care about aesthetics.  Steve and I discussed an approach using small boulders to make low retaining walls backed with fabric and drain pipes to capture and drain the water far out into the yard.  The slopes would be re-graded to provide runoff away from the house, covered with landscape fabric, and then covered with small boulders and “egg rock.”  The drain lines would all be buried and run to an exit point far out in the yard.

I spent much of the rest of the day working on our website and blog with the help of our cats, who were a bit needier than usual following their visit to the veterinarian yesterday.  Sometime during the day a package arrived from Amazon.  On Wednesday we ordered an Amped|Wireless SR20000G (wireless router/repeater/access point) to replace the one Mike (W8XH) gave us just before we left for Florida.  The SR20000G worked very well for us in our bus and is now a permanent part of our on-board communications technology arsenal.  We ordered it through Amazon Prime and had it in two days; no extra charge for shipping.

Linda picked up some groceries on her way home from the bakery and we had a simple dinner consisting of a very tasty spinach salad and an Amy’s Roasted Vegetable Pizza.  After dinner she worked on food for tomorrow’s visit with our daughter and son-in-law.  She made her fabulous vegan Sloppy Joe’s and carrot cake cookies while I worked with my new notebook computer.  Updates were available and I had to “update and restart” the machine six times before there were no more updates to install.  There were 24+5+20+4+8+10 = 71 updates in all.  Allen, the computer sales associate at Best Buy, had alerted me to the fact that once I activated the machine there would be quite a few updates, so this was not unexpected.

 

2014/04/29 (T) A Family Visit

Our son decided to bring his daughter to visit with us this morning.  They arrived around 10 AM and left around 1:30 PM.  This was the first time I have seen her since December 16th.  Linda got to see her when she was back in Michigan in late February and early March.  Madeline was one year old when I last saw her and was crawling.  She is now 16 & 1/2 months and walking like she invented it.  She seems to take great pleasure in her independent mobility for its own sake; pure joy.  She also loves to go up and down stairs (with adult supervision, of course).  She is curious about everything and took great delight in exploring the main floor of our house.  It was an excellent visit.

I made a run to the post office and used my 2m mobile ham radio while in transit.  Mike, W8XH, came back to my call and we had a nice QSO.  It was good to finally be back on the air.  I stopped at Teeko’s and ordered 2 lbs each of our two custom blend coffees for pickup on Thursday.  These are half regular, half decaffeinated blends that Jeff roasts right in the store from his amazing assortment of green beans.  Sweet Seattle Dreams is 1/2 Seattle Blend (reg) and 1/2 Sweet Dreams (decaf), and we were the first customers for whom Jeff ever made thus blend.  It’s a blend of two blends, so it has at least four different coffee beans, maybe five or six.  He told me once, but I have forgotten.  The other blend is all Ethiopian Yirgacheffe.  Both are excellent.

I did some research on laptop computers while Linda pulled together something for dinner.  She got a Samsung ATIV Book 8 a year ago.  It is a fabulous machine: 64-bit Intel Core i7 (Gen 3) microprocessor, Windows 8.1 (64-bit), a 15.6″ diagonal touch screen (16:9 aspect ratio), backlit keyboard, and lots of ports including USB3.0 and HDMI, but no internal optical media drive, so we bought an external one.  She especially likes the touch screen as it makes the computer work more like her iPad2.  I decided to get the Samsung ATIV Book 6 which had very similar specifications to the Book 8.  After dinner we went to the Best Buy store in Brighton to see if they had either of these machines.  When I went to the Samsung website and looked for a store near my location the only thing that came up in SE Michigan was the Best Buy chain.

Best Buy in Brighton has some people in their computer department who seem fairly knowledgeable.  I asked about the differences between Win 8 and Win 8 Pro and got a fairly technical answer.  The Best Buy chain also has small Samsung stores-within-a-store staffed by Samsung employees.  The bottom line was this:  Best Buy did not have, and could not order, the Book 6 and had one Book 8 in the store.  It had the Gen 3 processor but the Gen 4 has been available for a while.  It became clear from the discussion that Samsung has not released an updated laptop in a while and may be getting out of the laptop business.  We also found out that Sony has sold off their computer line to someone, and that Dell has not released or announced new products in many months following a private equity buyout and their continued presence in the laptop market is highly questionable.  I had Allen, the computer sales associate, show me what they had and it came down to a choice between a Lenovo (formerly IBM) and an ASUS.  ASUS actually makes the own computers as well as the excellent Nexus tablets.  I opted for the top-of-the-line model G750JM notebook computer.  At least it was top-of-the-line in terms of what Best Buy carries in their stores.

The G750JM has a 17″ diagonal HD (1900 x 1080) matte finish screen.  It is not a touch screen, which was fine with me.  The size is big enough that I can work with spreadsheets and edit photographs.  The matte finish screen means it will work well in the bus where there is a lot of light during the day and reflections can be a problem.  While the newer 4K (retina type) displays are stunning, they are only available in the smaller 13″ screen size and are often packaged with smaller capacity, but much more expensive, solid state drives (SSD).  The G750JM has a 1 TB HDD.  The HDD includes a 16 GB SSD that is primarily used to buffer the OS.  It has 8 GB of very fast RAM that is upgradable to 32 GB should I ever feel the need (and the price of 16 GB RAM modules comes way down).  It was the only laptop in the store that could be upgraded to that much RAM.  A maximum of 16 GB was the norm.  The video/graphics is powered by an NVIDIA GeForce GTX 860M with 2 GB of VRAM.  The computer has built in WiFi, of course, four USB 3.0 ports, an HDMI port, a LAN port, a bunch of other ports, and a built-in CD/DVD player/writer.  Basically, this machine is aimed at high end gamers, but that also made it well-suited to the things I need to do with it, and it was only $50 more than the Samsung Book 8.

We unboxed the machine as soon as we got home and plugged in the battery and AC power adapter/charger to bring the battery up to full charge.  Unlike older laptop computers the new ones do not require the battery to be installed in order to operate.  I would never run it without the battery, however, as the battery provides a built in UPS in the event of a power glitch.  We powered it up and it found our various home WiFi networks.  We selected one and proceeded with the initial configuration, personalization, and registration steps.  Part way into this process a fast moving storm front brought intense lightning, thunder, and high winds so we wrapped up what we were doing, shut down, and unplugged.  Ditto for all of our sensitive (read data storage) devices.

Based on my limited exposure to the computer thus far I am very satisfied with the purchase.  It will take me some time to get it fully configured and switch over to using it as my primary computer, but with the end of support for Windows XP I need to get it done sooner rather than later.  Truthfully, setting up a new computer, especially one with a (radically) new operating system, is not at the top of my list of really fun things to do.  It is inevitable, however, and always yields significant rewards once I get over the initial hump in the learning curve.  It is also an opportunity to start clean and exercise moderation with the objective of having a more streamlined and efficient operating environment that allows me to focus on the things I really need to do.