Tag Archives: Amped Wireless SR20000G

2015/12/09 (W) Return to Satchel’s

Leave a reply

I was up at 7 AM.  It was 66 in the coach; cool but tolerable.  I put on my sweats, fed the cats, and cleaned their litter tray, but did not turn on the heaters.  Linda was up by 7:15.  I made coffee and we delayed breakfast until later.  We are going to Satchel’s for dinner with John and Ali this evening so we decided to have brunch instead of breakfast and lunch.  Satchel’s has some of the best vegan pizza we have ever had, including a choice of vegan cheeses, so it will be a big meal for us.

Linda used her iPad to do some holiday shopping.  I checked my e-mail and was then going to play a few games on my iPad but the iOS 9.2 update was available so I started the installation process and set it aside.  Once the updated OS was installed I had five app updates available so I initiated those, one at a time, and started working on this post.  The updates downloaded fast enough to be reasonable.  Either the Resort has made significant improvements in the Wi-Fi and Internet connection bandwidths or very few people are using the system at the moment, or both.

I got the BCM boxes out from under the bed and integrated in the issues I received on Monday.  Everything was there so the three sets of issues are ready to give out as door prizes in at the Arcadia Rally 2016.  I worked on the photo tips article for BCM for a while and then decided to do some more work on the BCM page on our website.  I had a detailed e-mail from Gary at BCM with suggestions, and I find it easier to use that kind of information when it is printed out, but when I tried to print it my computer said the printer was offline.  The printer display said it was “Ready” so I had a problem to investigate and resolve.

This was the first time we tried to use the HP Color LaserJet 3600 printer since we put it on board the bus and it was the first time we had connected it via the Amped|Wireless SR20000G network extender / router.  I had expected it to plug-and-play as this trip was also the first time we have used the newer/larger NAS on the bus with this particular router and it worked without me having to do anything to configure it.

I downloaded an updated version of Advanced IP Scanner and ran it.  It could not find the printer and claimed that both of our computers and the NAS were “dead” connections, even though they were communicating with each other and the Internet.  All of the evidence suggested that the problem was somehow related to network addresses.  I went into the printer configuration menu via the front panel and changed two settings, turning on IP Release and IP Renew.  I turned the printer off and back on but that did not cause it to connect.

I went in and out of the control panel in my computer looking at the various screens related to devices and drivers, specifically printers.  I also went into the web interface for the SR20000G where some settings and context dependent help screens caught my attention.  In particular, the SR20000G appeared to be set up as a DHCP client rather than a server and the help screen suggested that it was getting IP addresses from the primary router, i.e., the one connecting our “home” network to the Internet.  In our motorcoach, that is our Wi-Fi Ranger, and the Wi-Fi Ranger operates on a different range of locally routed IP addresses (10.139.1.nnn) than most home networks (192.168.17.nnn).  I opened the Advanced IP Scanner again and figured out how to get it to scan the local address range served by the Wi-Fi Ranger and voilà, there was the printer, the NAS, our computers, and the SR2000G.

The final step was to revisit something that caught my eye earlier.  In the printer driver configuration there is a Port screen and the printer was configured with a Standard TCP/IP Port in the 192.168.1.nnn range.  I created one in the 10.139.17.nnn range to match the address that Advanced IP Scanner indicated had been assigned to the printer.  I tried printing a printer test page and voilà (again) I heard the familiar sound of the printer indexing a sheet of paper and shortly thereafter had the test page in my hands.  I went into my e-mail and printed the one from Gary.  This was not what I expected to be doing today but it was satisfying to get it resolved and not have it take any longer than I did to get it done.

One of our tasks for today was reinstalling the awning style window in the living room.  I happened to notice this morning that one of the lever pins on the other driver side window was coming out, indicating that the C-clip was missing.  Closer examination revealed that the lever pins on the four windows we had repaired in April 2014 were all reinstalled with pins put in backwards.

I took a break from my other work at 1 PM and drove to the local NAPA store to buy new C-clips.  The clerk at the store had a kit of clips and a paper template for matching style and sizes.  He said our existing clips are actually E-clips, not C-clips, and the size I needed was a 1007.  He did not have any in stock but ordered them from another store and said they would be in at 4 PM.  We would be on our way to dinner by then so I indicated I would pick them up in the morning.

Back at the motorcoach John stopped by to let us know that he and Ali were going to do some shopping before dinner and to figure out a time to meet us at the restaurant.  We agreed on 5 PM.  As long as he was here I gave him the bag of Fire Ant Killer I bought for him on Monday.

We decided that we would also do some shopping before dinner.  We left at 3:15 PM and headed up FL-121 towards Gainesville.  When we got to I-75 we headed north to the next exit at Archer Road (FL-24) and made our way slowly through the traffic, into the outdoor mega-mall, and to Walmart.  We needed a small hassock (that would double as a storage cube), a small table (that we could put between the two captains chairs), a non-slip shelf liner (to put under the printer), a seat cushion (for the card table chair at the desk), a small mat (to put on the floor outside the shower to catch cat litter), batteries (for our bathroom scale), and high quality 8.5×14 paper (to print our holiday letter).  We found all of those items except the last one, but did not buy the hassock as the store only had them in gray.  We then worked our way to the Office Max store at the center of the mall.  They only had one (open) ream of 8.5×14 paper and it was regular copy paper.  Useless for our needs.

We put the address of Satchel’s pizzeria/restaurant into the GPS and worked our way over to the east side of town through rush hour traffic.  We pulled into the restaurant parking lot at 4:41 PM just as John and Ali were stepping out of their Tahoe two spots down.  Satchel’s is a very popular place but at quarter to five it was mostly empty.  It was a lovely late afternoon but the sun was already setting and the air would being cooling off quickly so we asked for an inside booth, which also happen to have padded seats.

We started with a small salad that was still big enough to share with Ali and John.  They had pizza slices but we ordered a medium (13″) pizza with Daiya mozzarella cheese, onions, mushrooms, and sun-dried tomatoes.  Soooo good.  John and Ali split a bottle of Cabernet, Linda had water, and I had ginger ale.  Satchel’s makes their own soda pop and it is very tasty (but contains sugar).

By the time we left the restaurant at 6 PM it was full of people, inside and out, and the noise level had risen to where Linda and Ali were starting to have difficulty with conversation.  We settled our bill and went on our way.  John and Ali had more shopping to do but we headed straight for Williston.  As we were approaching the intersection at I-75 I noticed that I was getting low on fuel.  I probably could have made it to Williston, but why chance running out of gas.  There are five filling stations near this intersection but the Mobil station was the first one on the right so I pulled in.  A few minutes later we were on our way again and we arrived back at our motorcoach at 7 PM.

I put the cushion on the desk chair while Linda put the placemat in the bathroom.  We opened the folding table and adjusted the height so the cats’ scratching post just fit under it and put it in place between the two captains chairs.  Having a table in that spot has been the plan from the beginning of the remodeling.  Although the folding table is temporary, it immediately increased the functionality of the interior.  It also allowed us to better visualize how the living room will look/feel when we finally install the permanent table.

Linda spent much of the rest of the evening shopping for holiday gifts and domestic necessities on Amazon.  She got presents ordered for everyone except her sister, with all of them being drop shipped directly to the recipients.  She also ordered a 15″x15″ brown storage hassock and a pair of washable floor towels (for the bathroom).  We definitely get our money’s worth out of Amazon Prime.

 

2014/05/02 (F) A Day At Home

Leave a reply

Linda went into the bakery today so she was up early and left at 6:30 AM to get ahead of the worst of the morning rush hour traffic headed into Detroit from the northwest.  She took my new laptop to have some critical software installed.  With the 17″ screen, the computer does not fit in any of our existing padded carry cases, so that is an accessory I will need to get.  I also have my eye on an external BluRay/DVD/CD optical media drive (read/write).  The BluRay disks will store anywhere from 25 to 45 GB of data which is more practical that CDs or DVDs for non-volatile /off-site storage of photographs and critical documents.

We only have one car at the moment, so I was stuck at home today (I don’t use the motorcoach to run errands).  Being stuck at home on a chilly, overcast, rainy day is not necessarily a bad thing.  After a light breakfast and my morning coffee I started a load of laundry and worked at my desk for a while.

I took a break from desk work and opened the front of one of our APC Smart UPS units that had died while we were away.  I had replaced batteries in a couple of these units but could not recall if this was one of them.  It was not.  When I opened the batter compartment I found the batteries badly swollen and I was unable to remove them from the case.  The tags on them indicated that they were from 2010.  The only thing I can think of that would have caused this was a failure in the battery charging circuit which continued to charge the batteries after they were already fully charged.  That would cause them to gas and swell as they are sealed AGM batteries.  We were probably lucky they did not explode.  Given this situation I will replace the whole UPS rather than put new batteries in it.  APC usually offers a trade-in allowance (called Trade-Ups) for the same or larger UPS.  Otherwise I have to dispose of the whole thing as electronic hazardous waste.

Steve Degenais of Village Landscape Development stopped by mid-morning to discuss two separate projects:  1) stairs to get from the pull-thru driveway to the front porch, and;  2) redoing the retaining walls on either side of the basement walkout.

When we bought the house last year it had a makeshift pull-thru driveway and no stairs or pathway to the front porch, which is the main entrance to the house.  The previous owners used the Florida room, which is just an enclosed patio slab between the house and the garage, as an entry/breezeway.  It was empty and they left it unlocked, entering the house through a door to the kitchen that locked.  We use the Florida room as a library, so we do not leave it open.  We also had the pull-thru driveway substantially improved last spring so we can park our bus with the entrance door opposite the front door of the house.  Carrying things back and forth between the house and the bus on a steep grassy slope is an accident waiting to happen.  There is a four foot drop in 18 feet from the front porch to the driveway and we need a proper set of stairs.

Although we have a walkout basement, the house is not set into the side of a hill.  If you walk around the house it appears to sit on top of a mound.  It appears that dirt was piled around the basement walls, except by the walkout, and graded away from house, more or less.  In the back it slopes in towards the walkout.  There are remnants of an old railroad tie retaining wall and it appears that sometime later someone tried to stabilize the two slopes with plastic held in place with small boulders, pieces of cinder block, used bricks, and whatever else was handy to throw in there.  That apparently wasn’t working very well so they built two retaining walls, each about seven courses high (~3 ft), with blocks meant for decorative edging of plant beds.  It’s also clear that they did not make any provision for water drainage behind the walls and yet two downspouts from the roof gutter system discharged into these areas before I used corrugated plastic pipe to carry the water away from the house.  The pipes are still there, sitting on the surface right where I put them last spring. The earth behind the walls has obviously moved over time and the walls are buckling in places.  Mud pushes through and around them.  It’s not pretty on several levels.

Our sump pump runs quite a bit in the spring and we need to get rainwater away from the foundation as much as possible.  Drainage and stabilization of the slopes are my primary concern but I always care about aesthetics.  Steve and I discussed an approach using small boulders to make low retaining walls backed with fabric and drain pipes to capture and drain the water far out into the yard.  The slopes would be re-graded to provide runoff away from the house, covered with landscape fabric, and then covered with small boulders and “egg rock.”  The drain lines would all be buried and run to an exit point far out in the yard.

I spent much of the rest of the day working on our website and blog with the help of our cats, who were a bit needier than usual following their visit to the veterinarian yesterday.  Sometime during the day a package arrived from Amazon.  On Wednesday we ordered an Amped|Wireless SR20000G (wireless router/repeater/access point) to replace the one Mike (W8XH) gave us just before we left for Florida.  The SR20000G worked very well for us in our bus and is now a permanent part of our on-board communications technology arsenal.  We ordered it through Amazon Prime and had it in two days; no extra charge for shipping.

Linda picked up some groceries on her way home from the bakery and we had a simple dinner consisting of a very tasty spinach salad and an Amy’s Roasted Vegetable Pizza.  After dinner she worked on food for tomorrow’s visit with our daughter and son-in-law.  She made her fabulous vegan Sloppy Joe’s and carrot cake cookies while I worked with my new notebook computer.  Updates were available and I had to “update and restart” the machine six times before there were no more updates to install.  There were 24+5+20+4+8+10 = 71 updates in all.  Allen, the computer sales associate at Best Buy, had alerted me to the fact that once I activated the machine there would be quite a few updates, so this was not unexpected.

 

2014/01/16 (R) Wi-Fi Woes

2 Replies

The Wi-Fi at Williston Crossings RV Resort has been very good since we got here.  There are professional grade access points with decent antennas positioned on towers all through the park.  The signals have been strong and steady, and the bandwidth generally very good.  Wi-Fi is always going to slow down when lots of people are using it, but the resort seems to have enough access points feeding into a robust enough router and gateway to handle the demands placed on the system by the residents.

A couple of weeks ago the resort announced that they were going to reconfigure the Wi-Fi system slightly and that starting on January 10 we would need a username and password.  We generally prefer “open” Wi-Fi signals since we connect to them with our roof-mounted Wi-Fi Ranger Mobile, which repeats the signal as a secure hot spot around out coach.  Our current configuration goes one step farther.  We have an Amped Wireless SR20000G Wi-Fi router/repeater configured as a bridge to the Wi-Fi Ranger.  The SR20000G creates a local area network to which we connect wirelessly along with a RAID 1 Network Attached Storage device connected via Ethernet.  The SR20000G then connects to the private/secure hotspot side of the Wi-Fi Ranger Mobile, which is connected to the wide area network on the public side and from there to the Internet.  It’s a great setup when everything works correctly.

In the past we have used our Wi-Fi Ranger Mobile successfully with both secure and filtered Wi-Fi networks, and both types are handled through the Wi-Fi Ranger web-browser interface.  Secure Wi-Fi systems require an encryption key, which is entered through the Wi-Fi Ranger control panel and stored for future use.  Filtered Wi-Fi networks are not secure.  After the radio and logical connection is established, you are taken to a web page where you enter a username and password and accept the terms and conditions of use.  Indeed, places like Panera don’t even bother with the username and password, they just want you to acknowledge the terms and conditions of use before allowing you access to the Internet through their system.  Fair enough, the Wi-Fi Ranger is designed to handle that as well right from the control panel.

We have had our system configured and working flawlessly right through yesterday morning.  When we returned from a day of hiking and visiting it was obvious that something had changed.  It still wasn’t working properly this morning so I inquired in the office and they confirmed that the guy who takes care of their Wi-Fi network had made changes yesterday and was working on the system today.  I reconfigured some of our equipment to use our Verizon Mi-Fi to get online and take care of e-mail and some BCM article tasks.  I called the Wi-Fi guy and chatted with him briefly, just to explain our setup and make sure there wasn’t any reason for it to now work.  I spent part of the rest of the day working with and reconfiguring our equipment and by late afternoon everything seemed to be back to normal.  I even found a better spot in the coach for the Verizon Mi-Fi device.

The day ended well, however, as Linda made whole-grain angel hair pasta with garlic, onion, mushrooms, and sun-dried tomatoes, perfectly dressed in olive oil.  It’s one of my favorite dishes.