Category Archives: WFPB

Posts related to our Whole-Foods Plant-Based approach to healthy eating. We became vegetarians in 2000 and transitioned to being vegans in 2011. We discovered the WFPB concept in 2012.

2015/04/21-25 (T-S) IN, MI, Home

2015/04/21 (T) Back to Twelve Mile, IN

The outside air temperature dropped into the 30’s (F) last night and the air temperature in the coach fell to 60, so when I got up this morning I turned on the Aqua-Hot diesel-fired hydronic heating system to take the chill off.  We eventually got up, got dressed, and walked across to Small Town Brew to get a couple of cups of coffee and chat with owner Lisa Paul and her friend/neighbor, Ashley, who helps her run the coffee shop.  Both of them remembered both of us, which was nice.

It’s interesting sitting in a small town coffee shop, where everyone is a friend or relative, and just listening to the conversation.  We are outsiders her, of course, strangers to most of the folks who drop in, but everyone is nice to us.  Some are curious about who we are, and where we are from, but rarely ask why we are there, in this little coffee shop in this little town, surrounded by corn fields.  Of course, we usually mention that we are friends of Butch and Fonda, so that probably answers whatever questions they may have had.

We eventually returned to our coach and had breakfast.  We tried connecting our WiFiRanger to Butch and Fonda’s Wi-Fi router yesterday and it was able to connect and obtain an IP address but the data transfer rate was so slow that web pages would not load and e-mail would not download before timing out.  I turned our Verizon Mi-Fi on and we had a very weak but usable signal, so I connected the WFR to the Mi-Fi and we were able to do the few things we needed to do online.  We then went in the house to let Butch and Fonda know we were awake and see what they were up to.

Butch’s brother, John, and his nephew, Brock, showed up and helped Butch with the driver side front wheel assembly on Butch and Fonda’s MC-9 bus.  The tire/wheel was off when we arrived yesterday and I learned that Butch is replacing the hub bearings and seals, installing an automatic slack adjuster for the brake, and replacing the brake pads.  It looked like quite a job with some large, heavy parts, so I did my part by staying out of the way.  I also took a few pictures at Butch’s suggestion.  He does not want to write articles for Bus Conversion Magazine, but he has been interested in having me write articles about projects on his bus.

Linda spent some time working with Fonda’s new sewing machine that she got while they were in Quartzsite, Arizona.  It is a little smaller than a regular sewing machine, only weighs 13 pounds, and only cost about $130.  Linda gave her sewing machine to her sister many years ago but now that she is retired she is thinking that it might be nice to have one for mending tasks or projects, such as new privacy curtains for the bus.

Butch got a catalog recently from Crimp Supply in Royal Oak, Michigan, which is not at far from our house.  I glanced through it last night and it contains a lot of specialized parts that would be useful to a ham radio hobbyist or someone converting a bus into a motorhome.  I called and requested a catalog and had a nice chat with Debbie.  She was willing to provide me with additional catalogs that I can give to members of GLCC and CCO at the Back-to-the-Bricks and/or Surplus & Salvage per allies in August and September respectively.  She was also willing to show up in person and give a brief presentation on her company and hand out the catalogs.  Cool.

Brock had to leave after which Butch and John decided to go to the shooting range along with a third guy whose name I did not get.  I went along to see the range and watch what they were doing.  Butch had home-brewed some shotgun shells for his Ruger revolver and wanted to test them.  They caused the revolving chamber to jam so they will require some additional work.  John had a new semi-automatic pistol and wanted to see how it handled.  He also had ammunition he had loaded with bullets he had cast and wanted to test fire them.

I was offered the opportunity to shoot but declined.  I have never handled a pistol and it would have been a waste of good ammunition.  I did take a class in rifle marksmanship while I was at the University of Missouri – Columbia many years ago.  I was in the Air Force R.O.T.C. Program at the time and thought I should know something about how to handle a firearm.  Learning to handle a pistol correctly would have been more relevant, but I do not recall a course being offered for that.  I bought a Ruger 10-22 rifle at that time, and I still have it.  It’s a .22 caliber semi-automatic rifle designed to look like an M-1 carbine and features a 10-round rotary clip that is flush to the bottom of the stock when inserted.  I was only interested in shooting at paper targets so I added a scope to it.  It is safely tucked away with a trigger lock on it, but I have not fired it in many, many years.  I should probably bring it to Twelve Mile the next time we come down, let Butch inspect and clean it properly, and take it to the range just for grins and giggles.

John and the other guy went back to Logansport from the range.  When Butch and I got back to the house he continued working on the driver side front wheel of their bus.  I helped a little, but mostly by taking photographs for a possible future article.  After putting tools and parts away we sat and relaxed for a while and then all of us went to Logansport for dinner at Pizza Hut.  It was 8:45 PM by the time we got back so everyone said “good night” and turned in for the evening.

2015/04/22 (W) Chillin’ in Twelve Mile

Yesterday looked and felt more like winter than spring with gray, cloudy skies and blustery, cold winds.  The temperature overnight dropped into the mid-30s but we were toasty warm under blankets with our electric heating pad turned on.  I got up at 7:30 AM and turned on the thermostats.  The temperature in the kitchen was reading 63 degrees F but the temperature by the dashboard was only 53.  The Aqua-Hot has performed very well since I rebuilt the blower bearings and quickly brought the temperature in the coach up to 70 degrees F.

We put on our sweats and walked over to Small Town Brew for coffee and conversation with owner Lisa Paul and whomever else might be there.  Three local guys were enjoying their morning brew when we arrived.  They eventually left and were replaced by others.  Most of the patrons seemed to be retired or semi-retired farmers.  One fellow, Lee, chatted with us at length about a canvas covered hoop barn he put up.  It was constructed using laminated wood hoops rather than steel, was 30′ wide by 70′ long and cost about $4,000 15 years ago, although I was not clear whether that included the 4-foot high poured concrete walls.  He already owned concrete forms and the heavy equipment that one finds on farms, so he was able to do a lot of the work himself without renting equipment or hiring contractors.  Still, it has to be the lowest cost way to create a structure for getting our bus out of the weather and out of sight.  It is unknown, however, whether the Township and County would let us to put it up.

Butch left at 8:30 AM for medical appointments in Logansport and Fonda came over at 10:45 AM to gather up Linda for a girl’s day out.  Linda wanted to go to McClure’s Apple Orchard on US-31 between IN-16 and US-24.  Although it is very close to Twelve Mile Fonda had never been there.  They were then headed to Peru.  Although it is the same distance from Twelve Mile as Logansport and Rochester it is the city that Butch and Fonda visit the least.  Peru’s claim to fame is that it was the birthplace of Cole Porter and Emmet Kelly and was the winter home of several circuses many, many years ago.  I believe there is a circus museum there that Nick Russell wrote about in the Gypsy Journal.

With no bus project or social interactions I settled in to work on my blog and await everyone’s return.  It started out sunny this morning but by 11 AM was thickly clouded over and looking wintery with blustery winds.  The only bus project I had in mind to do today was to pull out the chassis batter tray, check the circuit breakers, disconnect the batteries, swap the upper 12 V pair with the lower 12 V pair and reconnect them.  It was not something I wanted to do alone and I did not have to do it today, especially under cool, windy, overcast conditions, so I ended up not doing it.

Linda and Fonda eventually returned, having first gone to the Walmart in Logansport.  Linda picked up some hummus and Snyder’s sourdough pretzels so we snacked on those for lunch.  Linda then hung out with Fonda while I continued to work in blog posts.  Butch finally returned from his medical appointments and busied himself with something.  Whatever it was, he was not outside working on their bus and neither was I.  I managed to get the post for April 1 – 3, 2015 uploaded to our blog.

Linda and Fonda developed a plan for dinner.  Fonda made a nice salad and baked a loaf of par-baked bread that we got from Marilyn.  Linda made black beans and rice and prepared a mix of fresh blueberries and strawberries for dessert.  Linda and I each had a glass of Franzia Red Sangria.  After taking all of dirty serving containers back to our coach we returned to the house to visit a bit longer and finally returned to our coach just after 9 PM.  That left me enough time to pull together the posts for April 4 – 6 and upload it before turning in for the night.

2015/04/23 (R) Return to Michigan

I was awake at 6:30 AM and finally got up at 7 and put on my sweats.  The Aqua-Hot was already on so I turned up the thermostats and turned on the engine pre-heat loop.  I also turned on the Broan cube heater and pointed it into the cockpit as the temperature on the dashboard was only 50 degrees F.  I walked over to Small Town Brew, got a cup of coffee, and said “so long for now” to owner Lisa Paul.  Linda was still asleep when I got back so I fixed a couple slices of toast for my breakfast, turned on our Verizon Mi-Fi, and settled in to take care of a few e-mails.  Linda finally got up and, as I suspected, had not slept well last night.  She had some toast and orange juice but had no interest in coffee, a strong indicator of just how tired she was and not feeling completely well.

When she was done with the toaster I turned the cube heater off and turned the electric block heater on.  The overnight low temperature was forecast to drop into the upper 20’s and starting the big Detroit Diesel at that temperature is hard on the engine so I wanted it nice and warm before I cranked it over.

Butch had an appointment with an ophthalmologist in Indianapolis around noon and had some other things to do down that way as long as they were there so he and Fonda planned to leave by 9 AM.  He came to our bus just before 9 AM to let us know they were close to leaving and that he put an air hose out by the automotive bay so I could fill the front tires on the bus if needed.  Based on the readings from our TireTraker TPMS, however, no adjustment was needed.

We planned to leave sometime after they did but not later than 10 AM.  The main reason for not leaving sooner was to give us time to digest our breakfast, but the other reason was our relatively short drive today to Camp Turkeyville, an RV park on I-69 just north of I-94.  This will be the first time I have been in Michigan, which I certainly consider home, since we left on November 30, 2014.  Turkeyville is only 80 miles from our house, but we will have a full hookup site so we can dump our waste tanks tomorrow morning and not need to use them on the final short drive to the house.

We started getting ready to leave around 9:45 AM.  I shut off the block heater, put Butch’s air hose away, and then took care of the chassis batteries, auxiliary air, and shorepower.  The DD fired right up and I switched it to high idle while it built air pressure.  As soon as the chassis was at ride height and the air dryer purged I pulled onto IN-16 pointing eastbound and pulled into the curb/parking lane.  That was around 10 AM.  I left the engine idling while Linda pulled the car up behind the bus.  By the time we hooked up the car for towing, checked the lights, and pulled away it was closer to 10:20.  I noted that the time was 10:30 AM EDT as we pulled onto US-31 N from IN-16 E.

Traffic was light and we had an easy run up US-31 to US-20 except for the 15-20 MPH crosswind from the WNW.  I also had a very cold breeze blowing into the cockpit by my feet and had to turn the heat up to stay comfortable.  We were an hour into our trip when I finally realized that I had not opened the air supply valve for the shutters on the two front house air-conditioner condensers which are installed in what is normally the spare tire bay.  Those shutters are held open by a spring and held closed by air pressure.  When they are open air can easily find its way into the cockpit.  There is also a mechanical damper that is supposed to regulate fresh air flow to the cockpit, or cut it off completely, but the flexible actuator cable broke some time ago and the damper/cable are difficult to access so it has not been repaired.  Either the cable broke with the damper in the closed position or I taped some sort of cover over the air inlet once upon a time because once I closed the shutters for the A-C compressors I no longer had cold air coming in by my feet.

Traffic was heavier on US-20 eastbound but it always is as it runs just south of South Bend and Elkhart, Indiana, and a bit north of Goshen.  It is still a limited access highway until east of Elkhart, so it moved along up to that point.  There was one stretch between there and Middlebury where major construction was taking place, but we got through that easily enough.  After that it was a nice, rolling, 2-lane highway and we rolled along at 55 MPH except for the occasional town on intersection.  We always enjoy driving through this part of Indiana.

We turned off of US-20 onto I-69 N, crossed into Michigan at 12:53 PM EDT, and pulled into the Michigan Welcome Center five minutes later.  We only had 37 more miles to our destination but we both needed a short stretch break and I wanted to open the air valve for the A-C shutters, which is in the bay under the driver’s seat.  We resumed our trip and exited I-69 at exit 42 around 1:45 PM, crossed over the highway, and traveled the 500 yards to the Camp Turkeyville entrance.  We followed the long, wide, winding entrance road and stopped at the office where Linda got us registered.  They put us in a 50A full hookup pull-through site with easy access that was long enough for us to leave the car hooked up for towing.

We went through our usual arrival routine and then Linda fixed a light lunch of French Country Vegetable Soup and a tofu hotdog on pita bread with mustard and relish.  She also made a pot of coffee.  We connected our WiFiRanger to the RV Park Wi-Fi system but did not seem to be able to move any data so we turned on our Verizon Mi-Fi and connected the WFR to it.

Linda spent the afternoon reading a book on her iPad and I mostly worked on my blog post for April 7, 8, and 9.  I had 14 photos for that post but inserted them into the post rather than put them in a WP image gallery.  I logged into our personal WordPress site, installed WordPress 4.2, and then installed updates to plugins and themes.  Once that was done I uploaded the blog post and uploaded/captioned/inserted the photos and generated the tags.  I clicked the “Publish” button about 7:10 PM.

Linda put dinner on the table about 10 after I finished working.  She made a nice tofu scramble, a dish that vaguely resembles scrambled eggs, and served it with toast and jam, a small glass of juice, and black seedless grapes.

I thought about working on my blog post for April 10th, as it is the last one for which I have photos, but I was too tired to get involved in that tonight.  We pointed our front OTA TV towards Battle Creek and Kalamazoo, found the local CBS station, and watched a couple of episodes of The Big Bang Theory and whatever else was one.  We caught some local weather and decided to enable the diesel burner on the Aqua-Hot, turn the thermostats on, and set the temperatures for 60 degrees F.  The overnight low temperature was forecast to be 27 and it was already 29 when we went to bed.  Welcome to Michigan in late April.

2015/04/24 (F) Touchdown

I awoke at 6:30 AM to an outside temperature of 27 degrees F.  Our coach has several ways it can be heated if we are plugged into adequate electrical power, including three electric toe-kick heaters.  I turned on the Aqua-Hot diesel burner and electric heating element last night before going to bed and left the living room and bathroom thermostats turned on with the temperature dialed back to just under 60 degrees.  I also turned on the Broan cube heater, dialed back the thermostat, and set in on the step to blow into the cockpit.

I got up at 7:15 AM and put on my sweats. It was 60 degrees F on the kitchen counter, but the refrigerator adds some heat mid-coach.  The thermometer on the dashboard read 53.  I turned the thermostats up to 68 and turned on the Aqua-Hot engine preheat loop.  I also turned on the front electric toe-kick heater.  I made coffee and then turned on the electric block heater for the engine.  I checked e-mail and monitored our amperage while I waited for the coach to warm up and for Linda to get up.  We were drawing about 30 A on Leg 1 and 20 A on Leg 2.  On a true “50 A” RV electrical service with a main circuit breaker that functions correctly we can safely draw 40 Amps on each leg, so our usage was not going to trip any breakers.

By 10 AM the temperature was up to 40 degrees, the sun was shining, and it’s was delightfully cozy in the rig.  I got a call from Michele Henry at Phoenix Paint in response to an e-mail I sent her yesterday and talked to her for 15 minutes.  We had planned on a 10:30 AM departure but by the time I connected the sewer hose, dumped the waste tanks, and put the hose away it was 10:45.  We had the bus and car ready to travel by 11AM and pulled out of our site.  We had to wait for a few minutes until someone moved a 5th wheel which they had temporarily parked in the middle of a two-way road while waiting to get into their site.  We finally made our way out of Camp Turkeyville and pulled onto I-69 N at 11:13 AM.

We had an easy run to our house and our wheels “touched down” on our driveway at 12:45 PM.  Even the dirt roads for the last two miles of our trip were in reasonably good shape, which made for a nicer homecoming.  We opened the house, put the cats in their carriers, and took them inside.  I got the bus plugged in and the air shut off while Linda put the batteries back in the water softener and sanitizer and turned the well pump on.  I turned the gas back on for the kitchen and fireplace and then set all of the thermostats up to 65 degrees F.  We unloaded a few things from the bus and then had lunch, after which I sent text messages to both of our children and to Chuck Spera to let them know we were home.

After lunch we unhooked the car from the bus and continued unloading the bus but did not get everything taken off.  I was tired and took a long nap, only getting up when Linda told me it was time for dinner.  We had a Daiya Mushroom and Garlic pizza.  We have used Daiya vegan cheese for a while but did not know they made pizza products until we saw them at the Dierbergs Market in Edwardsville, Illinois.  It had a thin, crispy, rice flour crust (gluten-free), lots of garlic and cheese (of course), and was very tasty.  I wish we could buy them near our house.

After dinner I called Butch to let him know we made it home safe and without any new or reoccurring bus issues.  He had reassembled the driver side steer wheel and discovered that the new brake drums he got from MCI some time ago are the wrong ones, so he is going to have to track down the correct ones next week.

2015/04/25 (S) Return to Regular

Do you remember when OTA TV stations used to break in to programs with special news bulletins or emergency alert tests?  At the conclusion of such interruptions the announcer would say “we now return you to your regular programming.”  Having spent most of 61 years living in stationary dwellings we still consider being back at our house to be the baseline for our regular lives.  The last two years, however, we have spent half of the year, more or less, living in our converted motorcoach.  That fact, combined with the fact that we moved to a new-to-us house just before we started our extended traveling, has altered our perception of what constitutes “regular.”  All we know for sure is that living this dual lifestyle is our new normal and we like it.

Whether living at home or in the bus we have routines.  Part of our “at home” routine is Saturday morning breakfast with our friends from the South Lyon Area Amateur Radio Club (SLAARC) and that is how we started our day.  We took our usual route to South Lyon and were surprised by the extent of the construction work at the I-96 and US-23 interchange.  We knew this interchange was scheduled to be rebuilt starting this year but as of March 1st, when Linda last drove through there, work had not started.  A lot has happened since then, and from the look of things this is going to be a BIG project.

There were a LOT of people at breakfast, 24 by Linda’s count.  It was good to see our friends and ease back into ham radio talk.  The club president, Harvey Carter (AC8NO), had the personalized club jackets we ordered from Sunset Sportswear in South Lyon over the winter so we got those from him after we were all done eating.  The jackets are dark blue with fleece lining and yellow embroidery that looks very sharp.  The left breast says “South Lyon Area” on top and “Amateur Radio Club” underneath.  On the right breast is our first name (in script) on top and our call sign underneath in block letters.

We stopped at Barnes and Noble on the way home to pick up a gift for grand-daughter Katie and found two books that we thought would interest her.  One was on rocks and gems and the other was on snakes, both of which are interesting to Katie.  Both are also an integral part of the desert southwest where we spent the winter.

When we got home I set about the tasks of moving various pieces of technology from the entrance foyer to my basement ham shack/office, reconnecting it to power and our network, and starting it up.  I started up our Linux box but the video driver would not “catch” so I shut it down and restarted it in Windows 2000 Pro, updated the es|et nod32 anti-virus database, and installed three Microsoft updates.  I checked e-mail on my primary laptop, responded to a couple, and then installed updates on all of the websites I manage.  WordPress just released version 4.2 and each new release triggers a flurry of plug-in and theme updates.

Our daughter, Meghan, had arranged for us to come over mid-afternoon to visit and have dinner without the bother and fuss of fixing a big meal.  Minn, the female cat, hid immediately but Inches, the male cat, hung around for a while.  Grand-daughter Katie is working at Pizza House in Ann Arbor where he dad, Chris, has been the general manager for a long time, but she got off work and arrived just after us followed by Chris, who had run out to pick up dinner at Seva.

Our son, Brendan, daughter-in-law Shawna, and grand-daughter Madeline showed up a little later, and Inches promptly disappeared.  Madeline is very sweet and interacts with her two kitties, Gus and Iggy, just fine but our cats, and Meghan’s/Chris’s cats, disappear whenever she comes to visit.  They are just not used to the size, motions, and sounds of a 28 month old.

Seva is a vegetarian restaurant that has been a staple of the Ann Arbor restaurant scene for many years but recently moved out of downtown to a location on the far west side of Ann Arbor.  While not just around the corner from Chris and Meghan’s house it is much closer, and easier to get to, than driving into downtown.  Many of their menu items are vegan, or can be made vegan, and that is mostly what they ordered.  We had a nice visit with excellent appetizers and main dishes, a dozen choices in all, and a nice Riesling wine from Washington State.

After appetizers we distributed the gifts we had picked up for everyone.  Besides Katie’s books Madeline got a “Dr. Seuss” book about deserts and a t-shirt from Marilyn with a design on the front that changes color in the sunlight. Both of our children, who kept an eye on our house for us over the winter and took in our mail, got the following:  A bottle of Red Chile Wine from St. Clair Winery in Deming, New Mexico; a bouquet of pequin chiles from Hatch Chile Sales in Hatch, New Mexico; a box of Prickly Pear Cactus jellied candies and a jar of Prickly Pear Cactus jelly from Organ Pipe Cactus National Monument in Arizona; a bag of Green Chile Pistachios from Eagle Ranch (Heart of the Desert) in Alamogordo, New Mexico; a two box set of olive oil and peach balsamic vinegar glaze from Queen Creek Olive Mill in Queen Creek, Arizona; and a non-stick grilling mat from the “Big Tent” RV Show in Quartzsite, Arizona.  We appreciate what they do when we are away which would be more complicated for us without their assistance.

We enjoy looking for gifts that are unique to the areas we visit and tend to limit ourselves to items that are consumable so no one has to find room to store or display something, at least not for very long.  We saw many wonderful art and craft objects this winter but they present a special challenge beyond simply getting them home.  We are no longer collecting “things,” as we already cannot display or store the stuff we have, and our children are in somewhat the same situation (which is why we still have a lot of stuff instead of them having it).

Then there is the matter of taste.  Both children have their own taste in art and have carefully arranged items for display on their walls and shelves.  As much as we might like something, and think someone else might like it, buying art for other people is fraught with peril because there is an implied expectation that it will be displayed.  If it is displayed but the recipient does do not like it then the gift is intrusive.  If it is not displayed the giver is disappointed and potentially offended.  Better to stay clear of all that by avoiding surprise gifts.  The exception is if we know they are looking for something in particular and we come across one.  In that case it is a simple matter to take a photo with one of our smartphones and message them to see if they want it, making it clear that “no” is an acceptable answer.

Madeline goes to bed at 8 PM so she left (with her parents) at 7 PM.  Both Minn and Inches came out shortly thereafter to have a bite to eat and get the attention they had missed for the last four hours,  We stuck around for another hour which gave us just enough time to get home before it got really dark.  Brendan and Shawna had kept/used Linda’s Honda Civic all winter. They came in two cars and went home in one so that Linda could get the Civic back to our house.  There is a chance that she will have to go into the bakery a day or two this week and I do not like be without transportation, especially when we have a lot going on.

We sat in the living room for an hour reading and relaxing with our favorite iPad apps/games but without the benefit of our natural gas fireplace logs.  I lit them when we got home and they operated for about 60 seconds and then shut off and would not relight.  I turned the pilot flame off and will deal with that tomorrow.  I went to bed, read for a while longer, and then went to sleep.

 

20150416-20 (R-M) MO, IL, IN

2015/04/16 (R) Carthage, MO to Edwardsville, IL

[Note:  There are no photos for these posts.]

I was awakened from a light sleep this morning by a change in the sound of our auxiliary air compressor and the pneumatic systems on the bus.  A valve that whines in a certain way as the system fills with air changed its tune and the compressor ran longer than it normally does and did not shut off.  I got up, turned it off, turned it back on and it finally completed its cycle and shut off automatically.  At that point I was up and wide awake so I got dressed.  Linda was awake by that point too so I suggested that we just get an early start on today’s journey, and that is what we did.  We pulled out of our site at the Coachlight RV Park at 7:30 AM and a few minutes later we were headed south on I-49.  Less than a mile later we looped around the cloverleaf interchange onto I-44 headed east.

The sky was overcast and we ran in and out of fog and mist as we traveled up and down the rolling hills of southwest Missouri with spring in full bloom.  The temperature was cool and the conditions made for easier driving than having a bright morning sun in my eyes.  Traffic was light to moderate for the first 2/3rds of the trip, albeit heavier passing through Springfield and Rolla.  About 200 miles into our trip we stopped at the Flying J at exit 226.  I-44 was now six lanes and we were at the fringe of heavier urban traffic and encountered a center lane closure on a bridge which brought traffic to a halt.  We patiently worked our way through that and a little farther along exited I-44 onto I-270 which became I-255 and took us across the mighty Mississippi River into Illinois, most of the St. Louis, Missouri metropolitan area to our north.

Once we crossed the river and traveled a few miles traffic thinned out but we bumped our way along as the road surface on this stretch of I-255 was very rough.  We exited I-255 onto I-55N/I-70E and then stayed with I-55 when it split from I-70.  It was a good thing, too, as I-70E was backed up all the way to the split with traffic stopped and a sign announcing long delays and advising motorists to seek an alternate route.  A few more miles and we were at our exit for IL-143, crossed over the highway, did a 180 onto the service road, and drove the last mile to the entrance to the Red BaRn RendezVous RV Park just east of Edwardsville, Illinois.

The entrance to the RV Park was a bit narrow but wide enough that I was able to swing in off the service road.  The interior gravel roads were also narrow, and I had to snake past the office, but they turned out to be just wide enough to accommodate an RV our size.  The office was closed but there was a note on the door with our name and site number.  The site had trees on either side that did not appear to be trimmed up high enough but it turned out that they were.

While not a destination park Red BaRn RendezVous is a nice little place in a location convenient to Edwardsville and Glen Carbon, Illinois, where Linda’s sister lives, and the Interstate highways that will get us to my sister’s house in 30 to 40 minutes.  The office building has men’s and women’s restrooms with showers and a small but well equipped laundry.  We had no commitments to visit anyone today and were in early enough that Linda gathered up the laundry and we carried it over to the laundry room.

Linda had some fresh blueberries that needed to be used so she made vegan blueberry pancakes for dinner.  We do not have these very often but they are a real treat when we do.  We were both tired and had headaches, unusual for me but not for Linda, and decided to drive into Edwardsville and find the Walmart.  We wanted to buy a present for Lilly and it gave us a reason/place to stretch our legs.  Back at the rig we located the OTA TV towers, oriented our front OTA TV antenna, and watched episodes of The Big Bang Theory while diddling on our iPads and computers.  I hate to lose a block of potentially useful time but I was not up to working on photos and blog posts and diddling was the best I could manage.

The only “issue” we had with the bus today involved the behavior of the air system.  There are three air pressure gauges in the cockpit—primary and secondary on the dashboard, and auxiliary to the side—corresponding to the three “systems” that operate the chassis (brakes and suspension), and accessories (belt tensioners, radiator shutters, air horns, step slides, and house components).  The air from the main engine air compressor goes through a dryer that removes moisture and then goes to the primary, secondary, and auxiliary tanks.  It sounds simple but it is a bit more complicated than that.  I returned an earlier phone call from Butch and discussed this with him.

As best I understand it (and care to take time to explain it here) a valve, or set of valves, regulates where the compressed air goes and the top priority is the brakes.  The primary tank/system supplies air to the rear brakes and the secondary tank/system provides air to the front brakes (or vice versa).  Until the air requirements of the brake systems are satisfied air does not flow to the suspension or accessories.  Once all of the systems are pressurized they are isolated from one another so that a failure of any component will not affect the other systems.  It is a clever, fault-tolerant design that works well and has stood the test of time.  The components are used on 18-wheelers, fire trucks, and all manner of heavy highway equipment, including commercial buses in passenger service.

When the system is working correctly this is what I normally see when driving.  When the systems are fully pressurized the primary, secondary, and auxiliary air pressure gauges all read ~130 PSI.  The primary and secondary gauges will stay at that pressure unless/until I apply the brakes.  The auxiliary gauge, however, will drop over time due to small leaks somewhere that I have not been able to isolate.  Once the pressure in any of the systems drops to about 90 PSI, which is almost always the auxiliary system, the main engine air compressor kicks in and brings the pressure in all of the systems back up to ~130 PSI.

What I saw for most of the drive today was different, and that is always a cause for concern and makes driving less enjoyable.  All three gauges were showing a loss of pressure and the pressure in all three systems was the same.  The compressor was still working and would kick in at ~90 PSI and bring all three back up to ~130 PSI, so that was good, but the behavior suggested that one or more isolation valves had “stuck” in a position that kept all three systems tied together, which was not good.  Because of the larger volume of air being lost through the leak(s) in the auxiliary system it took a lot longer for the pressure to bleed down and it took longer for the compressor to bring it back up.

About four hours into our six hour trip we stopped for fuel at the Flying J Truck Stop at exit 226.  When we resumed our travel I noticed that one of the gauges (primary or secondary, not sure which) was holding its pressure while the other one continued to drop along with the auxiliary gauge.  An hour after that I noticed that both the primary and secondary gauges were holding pressure while the auxiliary gauge was cycling, and this behavior continued for the rest of the trip.  Thus it appeared that whatever caused the abnormal behavior had self-corrected.  My suspicion is that a stuck valve had gotten unstuck.  Once we were parked and set up the auxiliary air compressor cycled on and off properly, confirming that the isolation valve(s) was(were) once again working correctly.

2015/04/17 (F) My Side

We were up between 7:00 and 7:30 AM, not because we had to be but because we were rested and awake.  We had a quiet, relaxed morning enjoying our coffee and granola and using our iPads to check on the world (L) and work on yesterday’s blog post (me).  We configured the bus to ensure the cats’ comfort while we were away and left at 10:30 AM to drive to my sister’s house in Bridgeton, Missouri.  We stopped for fuel just short of her house and finally arrived around 11:30 AM.

We were greeted by Patty and Maggie, her one remaining dog.  We visited for an hour and then went to a Panera (St. Louis Bread Company) not far from her house for lunch.  We returned to her house to continue our visit and await the arrival of Ryan, Amanda, and Lilly, who showed up a little after 3 PM.  They would have come earlier but Ryan had a routine work-related physical on which his continued employment depended.  To everyone’s relief he passed so everyone was relaxed.  Lilly was initially surprised to see us but immediately gave us a big smile and went to Linda’s outstretched arms.  Lilly is 27 months old and is a cheerful, happy child who interacts easily with whomever is around.

Ryan and Amanda were hungry so at 4:30 PM we headed to El Maguey Mexican Restaurant for dinner.  We had taco salads with beans instead of animal protein and everyone seemed to like their food.  It is Amanda and Ryan’s favorite Mexican restaurant.  Amanda and Ryan headed home with Lilly and we drove back to Patty’s house to wrap up our visit while we waited for rush hour traffic to subside.

Brendan called and Linda got to “chat” with Madeline and then each of us took turns talking to him.  He had received his offer letter from Eastern Michigan University and acknowledged it, so he will start his tenure track assistant professorship in the art history department in September.  The discussions about initial course assignments, however, have already started.  He also mentioned that Shawna’s application for tenure at the University of Michigan Ann Arbor is looking very positive.  Both of those pieces of information were very good news for us.

We took our leave at 7:30 PM and got back to our coach just before darkness settled in.  Having spent a long day enjoying the company of family we settled in to watch a few shows on the local PBS station’s Create sub-channel before turning in for the night.

2015/04/18 (S) LF-M-LH Day 1

Yesterday Linda (LF) talked to Marilyn (M) briefly as we (B & LF) were driving back to the rig from Patty’s house and they (LF & M) agreed that we (LF & B) would arrive at Linda H’s (LH) house around 11 AM tomorrow, which is now today.  (Hopefully the LF and LH designations will help keep straight which Linda I am referring to.  Most of the rest of this post is about today not yesterday.)

We were up this morning at 7 AM and had our usual coffee and granola.  It’s a good thing we will be getting home soon because we only have one day’s supply left of LF’s homemade granola.  It is so good that we have stopped buying commercial granolas because they do not have any taste by comparison.

After a suitably relaxing start to our day I continued plugging away at editing blog posts and selecting/processing photographs to go with them.  I dealt with some e-mails and then we gathered up our stuff and headed to (LH’s) and Marilyn’s house in Glen Carbon, Illinois.  Glen Carbon and Edwardsville flow together to form a contiguous urban area but they are distinct municipalities with Glen Carbon being to the south of Edwardsville.

We are camped just to the east edge of Edwardsville on the edge of a corn field.  The RV park is conveniently located to I-55 and just 10 minutes from LH and M’s house so we were there by 11:15 AM.  LH and M had purchased various fresh ingredients for a salad and after sitting and visiting for a while Marilyn assembled the salad.  There was something going on at the house across the street that resulted in the wife calling the police and three cars/officers being dispatched to the scene.  LH said the husband was himself involved in law enforcement so that added a certain tension to the whole situation as he almost certainly had firearms in the house.

We spent the rest of the afternoon chatting until Marilyn had to leave for a gala fundraiser for a school that her Congregation supports.  We decided to continue visiting with LH and stay for dinner.  LH had a bag of shredded vegan mozzarella “cheese” so we ordered a mushroom and onion no-cheese pizza from Imo’s and she ordered a medium supreme.  I drove into town and picked up the pizzas.  When I got back we added the vegan cheese to ours and heated it in the oven long enough to melt it.  It was very good.

In recent times Imo’s was our favorite pizza (after the demise of the Luigi’s restaurants in the St. Louis area many years ago) but the last time we tried one without cheese it was not very satisfying.  The crust is thin and crisps nicely, the way we like it, and the sauce is slightly sweet and used sparingly, the way we like it, but their normal cheese, a mozzarella and provolone mix, is (apparently) what pulls together the pie’s uniquely fabulous taste.  While the vegan mozzarella was not an exact replacement it made for a very tasty meal, bringing both taste and texture to the pizza.

We needed to do some grocery shopping so we took our leave at 7:30 PM and drove to the Dierbergs supermarket in Edwardsville.  There are three grocery stores at the intersection of IL-159 and Governors Parkway, but Dierbergs was the most likely to have what we were looking for.  Our shopping done we headed east on Governors’ Parkway almost to I-55 and took the service road back to our RV park.  We gave our cats the attention they were seeking while Linda (LF) settled in with her e-book and I worked on the blog post for our two-day visit to Organ Pipe Cactus National Monument.  I also proofread the final draft of the March 2015 issue of Bus Conversion Magazine and sent back my corrections.  I uploaded the blog post and then went to bed to work on the posts for yesterday and today.

2015/04/19 (N) LF-M-LH Day 2

Linda (LF) was up at 6:30 AM, earlier than usual, and I got up at 6:50 AM.  Before I had a chance to start making our morning coffee she pulled up the weather and showed me the radar.  Rain had been forecast to start just after midnight, and continue all day today and into tomorrow, but it appeared that it had not rained last night.  The radar, however, indicated that the rain was on our southern doorstep.  I needed to dump our holding tanks and refill our fresh water tank, so I took care of that while Linda made the coffee and updated her cost-of-camping spreadsheet.

The dump and fill process took me about an hour but we now have enough waste tank capacity and fresh water onboard to get us home with room to spare.  Based on Linda’s data our average nightly cost to “camp” this winter has been about $8.75.  Not bad.  Our average daily cost for our winter in Florida was over $20 which we felt was a very reasonable cost for wintering there.  We drove more miles this winter compared to last, almost double in fact, so we spent the money we saved on camping buying diesel fuel.  Fortunately diesel fuel prices in the central and western states where much lower than the prices in the southeast last year.  They were, in fact, the lowest prices we have seen in years so that was a nice break.

I updated my water usage spreadsheet while Linda got caught up on our personal accounting and bills.  Cell phones and cellular data, in conjunction with the Internet and electronic banking, have fundamentally transformed the full-time and extended-time RVing experience in ways that no one could have imagined 15 years ago.  I had an e-mail from Dropbox that Kate had joined a folder I had shared with her so I sent her a short e-mail updating her on our travel plans.  I also had an e-mail with the final draft of the print version of the March 2015 issue of BCM and verified that the corrections I uploaded last night had been made to my article.  I consolidated my blog posts for March 22 and 23 and finished editing them.  I had just started looking at the unprocessed photos for those posts when it was time to pack up and head to Marilyn and Linda’s (LH) house for the day.

The weather was overcast and gloomy and the rains eventually came, a perfect day to stay inside and eat, talk, and play games.  Marilyn has been making a real attempt at moving to a vegan diet so she prepared tomato soup and black bean burgers for lunch.  We then put the leaf in the dining room table and got out the Mexican Train dominoes game.  We brought hummus and Linda (LH) had made vegan guacamole so we enjoyed those with a few Fritos corn chips.  We also had fresh grapes and toasted almonds to munch on and a couple of bowls of popcorn.  We played 16 rounds of Mexican Train starting with the double 15 tile in the center and ending with the double “zero” (blank) in the center.  It was evening by the time we finished and everyone enjoyed having a whole day to hang out with family and friends with nothing more important to do than play a game.

We left just before 8 PM and drove through Edwardsville to get back to the RV Park rather than get on the Interstates.  There was very little on TV that interested us and we ended up watching an episode of The Man from U.N.C.L.E.  It was a very popular show in its day but is now very dated to the point of being almost silly.

Linda (LF) read and I selected/processed photos for my blog post about our visits to Ajo, Arizona on March 22nd and 23rd.  I got the post and photos uploaded and then went to bed.

2015/04/20 (M) Edwardsville, IL to Twelve Mile, IN

Linda was up a little before 7 AM and I was up a little after.  Today was a travel day, so we did not make coffee or have breakfast.  We were not hungry anyway having had our fill of food, both good and junk, yesterday.  We each had a cup of tea while we got our day started.

We started getting ready to leave around 9 AM and finally pulled out of the Red BaRn RendezVous RV Park at 9:50 AM.  We had about 330 miles to travel to get from Edwardsville, Illinois to Twelve Mile, Indiana.  Since the RV park is just off of I-55 we took I-55 north to I-72 near Springfield, followed that east to I-57 and then took that north to US-24.  We followed US-24 east and moved from Central Daylight Time to Eastern Daylight Time sometime after we crossed into Indiana.  US-24 joined up with US-35 to bypass Logansport, Indiana to its south and then split off to continue east towards Peru.  We picked up US-31 just before Peru and took that north to IN-16 where we headed back west about five miles to Twelve Mile.  It was 5 PM (EDT) when we arrived at Butch and Fonda Williams’ place.  The bus ran well except for a couple of tattletale lights that started blinking briefly towards the end of the trip.  The previous problem with the chassis air systems did not reoccur.

I checked the manual after we got parked and one of the lights was for a chassis battery voltage Hi/Low condition and the other was for the upper and lower 12 V strands of the chassis battery being out-of-balance.  Both conditions, if true, might implicate the Vanner battery equalizer but the first diagnostic step will be to check the circuit breakers.  The next step will be to check all of the battery connections, including the Vanner.  One of the things on my To-Do list is to swap the upper and lower batteries as the “24V” gauge on the dashboard usually reads 29 V and the “12V” gauge usually reads 14 V or slightly less if I have the headlights turned on.

Butch and Fonda had to take his parents to medical appointments in Lafayette, Indiana today and got home just before we arrived.  We did not realize they were there but that was OK; they knew we were coming and we have a nice level spot to park on concrete with a “50 A” electrical connection when we are here.  (It’s a 240 VAC connection with a 50 A RV outlet but we can only draw about 30 amps on each leg.)  Even though we left home on November 30, 2014 Twelve Mile feels like the place where our trip to the southwest U.S. began as we left from here in a caravan with Butch and Fonda on December 3rd.

We were settled in our spot and had our WiFiRanger connected to their Wi-Fi access point when Butch and Fonda either realized we were there, or that we were not going to knock on their door, and came over and knocked on ours instead.  They came in our bus and we talked for over an hour at which point Butch needed to deal with a Facebook group admin issue.  After they returned to the house Linda started preparing our dinner while I checked e-mail and then continued working on this blog post.

Linda sautéed onions, mushrooms, and garlic in a little olive oil and added torn spinach at the end.  She cooked two baking potatoes in the microwave oven and served them with the sautéed vegetables as a topping along with some almond milk jalapeño pepper jack vegan cheese.  A simple but satisfying dish on a cool, clammy evening.  We also had some black grapes with the meal which were tasty and refreshing.  We made two large cups of hot tea and took them to the house where we visited with Butch and Fonda some more.  By 10 PM we were too tired to be good company so we returned to our coach and went to bed.

 

20150411-15 (S-W) NM, TX, OK, AR, MO

[Note: There are no photos for the five days covered in this post.]

2015/04/11 (S) Relaxing Chores

We like to get up and go do things, but we also like not having to get up and do things.  Today we got up when we were ready to.  I used up the last four scoops of coffee beans from our first three pounds and opened the next/last three pounds; one each of Sweet Seattle Dreams, Cafe Europe, and Ethiopian Yirgacheffe.  Each of these is a half regular, half decaffeinated custom blend that Jeff at Teeko’s Coffee and Tea in Howell, MI makes for us.  Linda installed iOS 8.3 on her iPad while I made the coffee.

We had toast and jam for breakfast using some more of the English toasting bread we bought at Smith’s the other day.  After breakfast Linda played several of her word games, including Words with Friends, online with Karen.  I installed iOS 8.3 on my iPad and then worked on yesterday’s blog post and e-mailed it to myself.  (It is still the easiest way for me to get it from my iPad to my laptop, which somehow just does not seem right.)

Mid-morning Linda started cleaning the coach.  We have been in dusty environments for a lot of the winter, especially the last few weeks, and the coach needed a good vacuuming.  We don’t vacuum as often as we would if we did not have the cats with us as the vacuum is rather loud and they are afraid of it.  They do not like the vacuum cleaner at home either but they can get a lot farther away from it and have a lot more places to hide in the house than they do in the bus.

While Linda worked on the interior of the bus I got out the water softener, pre-filter, and hoses.  I first connected everything so I could run water through the pre-filter to remove any sediment and then backwards through the softener to back flush the resin bed.  I then connected the hoses in the normal forward flow direction and added 26 ounces of non-iodized table salt to the captive filter housing on the inlet side of the softener tank.  I no longer use this housing for a filter.  Its sole purpose is to hold salt for regenerating the softener.  That way I do not have handle a wet filter while trying to keep it clean so I can reinstall it.

The regeneration procedure was the same ordeal it has been all winter, taking a few minutes of my time spread out over several hours.  Most of that time I worked on blog posts and photos, but my work was interrupted every 20 to 30 minutes to attend to the softener.  I did, however, manage to get the water coming out of the softener to finally test at 1.5 gpg TH.  That should be enough softening capacity to get us home without having to regenerate the water softener again.

For dinner Linda made a barley, split pea, and lentil dish with sautéed vegetables and a hint of soy sauce.  It was very tasty.  We had the TV on the local PBS station and I finished my consolidated blog post and image gallery post for the week of the Escapade rally and uploaded them to our website/blog.

2015/04/12 (N) Edgewood, NM to Amarillo, TX

Today was a travel day and we normally skip breakfast and coffee on such days, but not today.  I was up a little after 7 AM and we did not plan to leave until 9 AM so we had time to make, consume, and digest some coffee and toast.  I turned off the electric heating element for the Aqua-Hot and turned on the diesel burner and engine pre-heat coolant circulating pump.

When we were done with breakfast we got the Dewalt air compressor out of the car and checked all of the tires on the bus and the toad.  It turned out that all of the pressures were slightly higher than where I normally set them, due in part to our altitude of 6,700 feet ASL, and that was want I wanted.  In driving from the Route 66 RV Park in Edgewood, New Mexico to the Overnite RV Park in Amarillo, Texas we will drop just over 3,000 feet in elevation.  That, in turn, will cause the cold pressures in the tires to drop.  The current cold pressures in the tires should be sufficient to allow for that, but I will check the TireTraker monitor in the morning to be sure.

By the time I finished checking the tires Linda had the interior ready for travel.  We hooked up the car, set the car to be towed, switched on the bus chassis batteries and engine accessories air supply, checked the lights, turned off the Aqua-Hot burner and engine pre-heat coolant circulating pump, started the bus engine, and switched the Level Low system to drive mode.  A few minutes later the chassis air system was fully pressurized and the coach suspension was at ride height.  We exited our site easily, pulled out of the RV Park onto Historic Route 66 westbound, and a mile later made two right turns and accelerated onto I-40 eastbound.

Once we were underway Linda called the Overnight RV Park in Amarillo, Texas to make sure they had open sites.  They did, but not many so she gave them our name to hold a pull-through site that would accommodate our bus with the car attached.  Since we are just staying one night we do not plan to not unhook the car.

We knew from our maps and what we could not see to the east that we were done with the Rocky Mountains.  We were now in the Great Plains and would be from here all the way through Oklahoma.  Not that the terrain was flat; eastern New Mexico was rolling terrain, occasionally steep, with mesas.  Not surprisingly the terrain did not change abruptly as we crossed into Texas, although the road surface and time zone did.  For lack of a better, or more official, line of demarcation I consider the central time zone as the boundary of the middle-west.

While not as dramatic as the mountain west the Great Plains are a place where grasses and low brush dominate a natural landscape that is largely devoid of trees and that have a beauty all their own.  The other thing we noticed as we moved east was the thickening cloud cover and occasional storm clouds and virga.  Linda had checked the weather forecast so we knew there was a low, but non-zero, chance we would encounter rain while driving and/or after we got parked for the evening.  We did, in fact, drive through a couple of miles of very light rain somewhere near the New Mexico / Texas border.

We only stopped once for a bathroom/stretch break and made very good time.  The posted (maximum) speed limit for most of I-40 in both states is 75 MPH.  Back east I typically limit my speed to 62 MPH or less if the speed limit is lower.  What I have discovered out west is that the bus really likes to travel at 68 MPH turning just under 2,000 RPM and so do I, at least out here in the wide open spaces.

Linda had selected the Overnight RV Park in Amarillo for several reasons.  For one, the name and description strongly suggested that this park was set up to accommodate overnight visitors passing through the area in their RVs and looking for a place to spend the night.  For another, it was on the east edge of Amarillo, so we will not have to drive through town in the morning when we pull out.  Finally, it was right across the street from a Pilot Truck Stop, so we did not have to make a separate stop for fuel.

We pulled of I-40 at exit 75 around 2:30 PM CDT and pulled in to the truck stop.  The place was crowded with trucks but we got lucky and pulled in behind a semi that was done fueling and pulled out shortly thereafter.  There was some confusion regarding the pump number so it took a bit longer than usual to top off the tank, but we were not pressed for time as our RV park for the night was right across the street.  Linda settled the charge and we followed several tractor-trailers to the exit, back to the main road, and then turned north and drove the short distance up to the entrance to the RV Park.  We turned in and stopped by the office where Linda got us registered.  As is the case in most RV Parks we got a map of the campground with our site and entrance path marked, the login for the Wi-Fi, and the combination lock for the bathrooms.  We also received information about where to go and what to do in the event of violent weather.  Welcome to the Midwest and Tornado Alley.

Overnight RV Park is an older park with a lot of long-term residents, but it was not run down and had some nice, mature trees and plants.  I was momentarily concerned about low overhanging branches and tight turns when we pulled in but the gravel interior roads were wide enough, and the trees trimmed enough, to make access to our assigned pull-through site very easy.  I did, however, lift the tag axle to allow for the tighter turns.

We went through our normal arrival routine, got connected to the Internet, and started looking at our RV park options in the greater Oklahoma City area.  We plan to stay two nights and take part of our one full day to visit my Uncle Bob and Aunt Helen who live in Norman just south of OKC.  I had not contacted them, however, as our travel plans have been very fluid.  Now that we were a day’s drive away I called to let them know we would be in the area.  I was a bit surprised that Helen answered the phone and even more surprised to learn that Bob was in “rehab” although Helen did not say why.  She did say that we could visit him so we arranged to go to their house on Tuesday morning at 10 AM, get the address/directions to the rehab facility, and possibly take Helen with us to go visit him.

I texted my sister and niece to let them know that Friday from lunchtime to dinnertime would work well for us and accommodate their availability.  Linda texted our children to let them know we had landed safely in Amarillo and then texted Marilyn to share the same information.  Marilyn called back a bit later and Linda filled in the details.

The RV Park options around OKC were limited, which seems to be typical of urban areas including St. Louis, Missouri.  The options also seemed to be less than ideal based on reviews and expensive by our standards.  In the end we decided to try the Cleveland County Fairgrounds in Norman.  We sent a message via RVillage to someone who is currently there in a 42′ motorhome and inquired about the place.  They wrote back and said it was fine but was near full, does not take reservations, and only has 30A electrical service.  All of that was fine by us.  The pluses are that it is only a few minutes from my Aunt and Uncle’s house and it is only $20 per night, so we are going to leave early tomorrow and see if we can snag a spot.

inda re-heated some leftovers for dinner, after which we went for a stroll around the RV park.  We had just exited our coach and got into a conversation with our neighbors to the north.  They were working on errands so after a good chat we left them to their work and went on our walk.  Getting out and moving around in the cool, fresh air was just what we needed after a long day of sitting and driving and invigorated us enough to stay up until 9 PM.

2015/04/13 (M) Amarillo, TX to Norman, OK

The weather forecast did not favor travel during any particular part of the day; it was going to be rainy and windy regardless of when we left.  Getting a spot at the Cleveland County Fairgrounds, however, might depend on getting there early.  We targeted an 8 AM departure for our 4.5 hour, 270 mile trip.  We were up at 7 AM and each had a cup of tea and a banana.  We did not unhook the car last night, so all we had to do was run it through the towing procedure and it was ready to go.  We pulled out of our site at 8:20 AM.

Our route today was I-40 east to I-35 south to US-77 south to East Robinson Street.  All but the last 20 miles was on I-40 which mostly ran east to northeast.  Winds were 15 – 20 MPH and gusty out of the northeast the whole way.  That meant I almost always had a headwind component and often had a crosswind component.  The headwind requires the engine to work harder so I set the cruise control at 64 MPH instead of the 68 MPH I ran most of yesterday.  The crosswind component meant I had to actively work the steering and the lower speed made that more comfortable as well.

Most of the trip was through rural countryside with good road surface and light traffic.  We encountered a few construction zones but there was no work being done due to the weather.  As we approached the Oklahoma City metropolitan area traffic became much heavier, as expected, but the highways had more lanes and everything seemed to move along just fine.  In particular I-40 and I-35 always had at least three lanes allowing me to stay in the center, away from entering traffic, and move to the left or right as needed for an exit ramp.  The whole drive would have been easier without the rain and constant fiddling with windshield wipers, but I was always able to see well enough to maneuver safely, it was just more work and bit more stressful than normal.  I seem to handle urban road systems OK; it’s just not my favorite thing to do.

The Cleveland County Fairgrounds was easy to find and easy to access.  As soon as we pulled in we could see where the RVs were parked.  I pulled up out of the way while Linda called the Fairgrounds office.  She was told to go ahead a find a place to park and then register at the kiosk or in Building G.  I pulled up into the gravel parking area that had the RVs backed along two sides, like an “L.”  One leg of the L was paved and the other was grass/gravel.  We noticed one empty site in the paved area so I pulled around in front of it (so no one else could take it) while we unhooked the car.  (When camping in a no-reservations, first come, first served campground you have to stake your claim to an empty site.)  Linda moved the car out of the way and then spotted the rear end of the bus while I repositioned it and then backed it into site #9.  We have been towed out of two fairgrounds at the end of rallies where it rained so we were glad to get this paved site.

The sites here are all full hookup with 30 A electric and include usable Wi-Fi for $20/night.  That is a much better deal than anything else we could find in the OKC area, and is also the closest place to where my aunt and uncle live, so it was a great find.  We probably won’t use the fresh water or sewer connections and the 30 A service will be OK.  Apparently there are also some 50 A sites but we did not need that much power and did not want to take the time to see if one of them was open.  Given forecasted high temperatures that will barely reach 60 degrees F we will not need our air-conditioners.  As for heat, we will use our Aqua-Hot in diesel-fired mode for domestic hot water and space heating, if needed.

Once we had the power connected and got settled in I made a pot of coffee while Linda made roll-up sandwiches for lunch.  She then checked us in to the Fairgrounds on RVillage and made our reservation for the Red Barn Rendezvous RV Park near Edwardsville, Illinois starting on Thursday.  We will be in the St. Louis, Missouri area for four or five nights visiting family before pushing on to Twelve Mile, Indiana.  She then researched places to stay near Joplin and Springfield, Missouri for Wednesday evening.

While Linda was doing all of that I finished up yesterday’s blog post and started working on this one.  I then logged-in to RVillage.  There are three other RVillagers checked in to the CCFG so I posted to the home feed and to the park feed to see if I could make contact with any of them.  One of them (Hollywood Bob) is also a member of the SKP Photographers BOF which Linda and I help run.  (I am the owner/leader of the RVillage Group.)  I sent him a friend request and then a personal message.

The rain let up not long after we arrived at the Fairgrounds but the wind continued, with gusts occasionally rocking the bus.  The bus is fairly massive but also has a lot of surface area and sits on air springs.  We do not have leveling jacks, so strong/gusty winds can, and do, rock the bus.

Hollywood Bob and his girlfriend Barb walked by so I went outside to chat with them briefly and we arranged to walk over to a local coffee shop at 8 AM tomorrow.  I then spent the late afternoon and early evening editing the text for my March 13th blog post on our visit to the Sonoran Desert Museum west of Tucson and then worked on selecting photos for the post.  Somewhere in there we took a break and went for walk around the Fairgrounds.  It is not a large facility but has nice buildings and grounds.

Linda heated up the last of the barley and vegetable leftovers and steamed some halved Brussels sprouts and finished them with a White Peach Balsamic Vinegar Glaze from the Queen Creek Olive Mill near Arizona City, Arizona.  Yum.  After dinner we turned on the front TV and tuned in PBS to watch Antiques Roadshow.  I finished selecting and processing photos for the March 13th post around 11:30 PM but did not upload it

2015/04/14 (T) Bob and Helen

I was up at 6:30 AM and uploaded my blog post for March 13th.  We had spent that day at the Sonoran Desert Museum west of Tucson, Arizona and photographed the sunset from nearby Gates Pass.  The post was brief (by my standards) but I put over 30 photos in an image gallery.

At 8 AM we walked over to Hollywood Bob and Barb’s rigs, met up with them, and then walked the short distance to the Dora Marie Bakery and Coffee Shop just across Porter Avenue from the Cleveland County Fairgrounds.  We sat there conversing over coffee until 9:45 AM, mostly about RVs and RVing as that is generally the first and easiest conversation to have with new friends.  I already knew from a brief chat with Bob yesterday that both of them are members of the Escapees RV Club and that Bob is a member of the SKP Photographers BOF.  Bob is also a Freethinker and knew that we were as well from our RVillage Profile.  We found out over coffee that they are both members of the WINs (Wandering Individuals Network) and LoWs (Loners on Wheels) which are independent groups for single RVers.  As we were walking back to our rigs we agreed to get together for SKP happy hour at 4 PM.

Our main reason for being in Norman, Oklahoma was to visit my Uncle Bob and Aunt Helen.  Uncle Bob earned a Ph.D. in micropaleontology over 60 years ago when Ph.Ds. were less common than they are now.  He moved to Oklahoma after finishing his degree and did extensive work on the Arbuckle Mountains.  A Google search on “Robert O. Fay” produced a lot of hits referencing his published work.  He was attached to the University of Oklahoma at one time and that is what brought them to Norman.

Bob just turned 88.  He and Helen have been married for 49 years but never had children.  Helen had one son, Scott, from a previous marriage.  Scott married Linda and they had two children, Tiffany and Philip.  Scott passed away a while back but Linda still lives in Norman and teaches in OKC.  Tiffany and Philip and their families also still live in Norman.

I last saw Bob and Helen four years ago on the drive back to Michigan from Livingston, Texas where I had picked up our Honda Element from Dennis and Carol Hill.  Helen was having problems with her back at the time but Bob was as sharp as I remembered the last time I saw him 26 years earlier while returning from a trip out west with Brendan.  All of our memories of that visit were a bit vague but my recollection is that Meghan and my sister, Patty, met us there so Patty must have driven Meghan to OKC from St. Louis, Missouri.

When I called on Sunday to let Bob and Helen know we would be in the area I talked to Helen and found out that my uncle was in a rehabilitation facility not far from the house but she did not say why.  When we arrived at their house at 10 AM this morning we were greeted by Tiffany, Brandy (Philip’s wife), and Helen who was up walking around and sharp as ever.  We visited briefly and then followed Tiffany and Helen over to the rehab facility.

Uncle Bob is in the facility recovering from a persistent pneumonia, which was treated with an antibiotic to which he was allergic, but he also has Parkinson’s.  He is still coherent but the decline in both his physical and mental condition was striking.  I was not shocked by that, however, and only briefly surprised by virtue of not being fully prepared.  We had a conversation nonetheless, and Bob asked, and talked, about family and genealogy which became his research passion along with geology.  Tiffany took a cell phone picture of Linda and me with Bob.  She had to get back to work so she took Helen home while Linda and I stayed a bit longer to chat with my uncle.

Bob was tired, dozing on and off, and it was getting close to lunchtime.  Staff also needed to check on Bob so we took our leave.  Although we will be back this way in future years I had the strong sense that Uncle Bob is not going to improve going forward and this may be the last time I get to see him.  It was not quite the meeting I had envisioned, but I was glad for what we had.  My dad will be 90 in June and cannot travel very far from his home so I don’t see any way he and his brother will ever meet again.  There is always a final everything but it is usually only clear in retrospect.  Such is life.

Before Tiffany and Helen left Tiffany called her mom (Linda) to see if she could be available to get together after work this evening.  Linda said she could rearrange some things with her brother and would love to meet for dinner.  We discussed meeting at the house and going out to dinner from there.

Tiffany invited us to stop by her school, which is just down the street from the Fairgrounds, so we did that right after lunch, which consisted of a couple of tofu hotdogs wrapped up in soft tortillas with mustard and relish.  Not WFPB but definitely vegan and definitely tasty.  Tiffany gave us a tour of her school and we got to meet Cody, her significant other, who also works at the school.  She had talked to her mom (Linda) and Helen and they decided that we would all be more comfortable and better able to converse at the house.  We explained how we eat and Tiffany said she and Brandi (Philip’s wife) would take care of bringing in food and make sure there were items for us.

I spent most of the afternoon working on blog posts but took time out to check the pressures of the two front bus tires.  I thought I would have to adjust all of them now that we have descended to 1,200 feet ASL, but the front tires were still close to one another and above the minimum required pressure, so I did not get out the compressor.  By 3 PM I was feeling the need for a nap and snoozed for an hour.

We walked over to Barb and Hollywood Bob’s rigs at 4:30 PM.  We were going to do SKP happy hour at 4 PM but we were not sure we could carry glasses of wine around the Fairgrounds so we went empty handed.  The Farmers Market opened at 4 PM so Bob, Linda, and I walked over to check it out while Barb started preparing their dinner.  They had to be at a dance event at 6 PM and we needed to be at Uncle Bob and Aunt Helen’s house around the same time.

Brandi has been Uncle Bob’s primary caregiver when he is at home and she brought him from the rehab facility to the house for the evening.  There was a houseful of people with laughter and energy and it was nice to see Uncle Bob and Aunt Helen surrounded by so many people who obviously love them and care about them.  Dinner was salad greens, vegetables, fresh fruit, sandwich fixings, and deserts and there was plenty for us to choose from.  Here’s how the family fits together:

  • Bob is my father’s younger/only brother (by two years).
  • Helen had one son, Scott Pelton, from a previous marriage.
  • Scott married Linda and they had two children; Tiffany and Philip.
  • (Scott passed away some years ago.)
  • Tiffany has three girls (young ladies); Alexis, Brianna, and Caitlin.
  • Brianna has a son, Liam, who is Bob and Helen’s great-great-grandson.
  • Philip married Brandi and they have three children; Cassidy, Cheyenne, and Danika.

We stayed until almost 9:30 PM and had a great visit that ended with a discussion about Linda and her three grand-daughters coming to Michigan for a visit sometime.  Tiffany texted me the cellphone photo she took of Linda, me, and Uncle Bob at the rehab facility this morning.  Caitlin set up a camera and took photos of the entire group.  When we got back to our rig I replied to text messages and provided our e-mail address and home phone number to Helen and Tiffany.

2015/04/15 (W) Norman, OK to Carthage, MO

There is always way more to do in any given area than there is time to do it, and the greater Oklahoma City area, including Norman, is no exception to that.  But our presence here proved to be the catalyst for a large gathering of people to whom we are related by marriage through Helen, my only Aunt, and only by virtue of her being married to my only uncle, Bob.  While it would have been nice to visit longer after last night’s gathering it would have been anti-climactic.

Through the serendipity that RVillage makes possible we also made the acquaintance of Barb and Hollywood Bob at the Cleveland County Fairgrounds.  As much as we would have liked to have coffee with them again this morning, we don’t usually have our morning coffee on travel days and wanted to be on the road by 9 AM.

Linda had been checking the weight restrictions on the roads in our home county and noted yesterday that they will be lifted on the 16th.  That means we have a green light to return to our house whenever we want to.  We already have plans to spend four nights near St. Louis, Missouri and visit family, and at least a couple of nights in Twelve Mile, Indiana visiting Butch and Fonda with whom we started this southwestern adventure on November 30th, 2014.  We will spend our final night at the Camp Turkeyville RV Park so we can dump our holding tanks before arriving home.

All of which is to say we had over 600 miles to travel from Norman to St. Louis, which is two day trip for us, with a reservation at an RV Park in Edwardsville, Illinois starting Thursday afternoon and arrangements to visit with family on Friday, Saturday, and Sunday.  Linda researched possible intermediate locations to split the distance roughly in half and found the Coachlight RV Park on I-49 one mile north of I-40 near Carthage, Missouri.

We did not take the time to buy an Oklahoma Turnpike pass and decided not to take I-44 northeast out of OKC.  From the CCFG we headed west on Robinson Street back to US-77 north, merged onto I-35 north, and then exited onto I-240 east.  Somewhere east of OKC I-240 ended and merged into I-40.  As urban highways go it was an easy exit from the greater OKC area.  We stopped at a rest area just before crossing the Oklahoma/Arkansas border and took a short lunch break, having vegan cold cut rollup sandwiches.

We continued east on I-40 to Fort Smith, Arkansas and then headed north on I-540, which has been re-signed I-49, through the Boston Mountains toward Fayetteville and Bentonville, the corporate home of Wal-Mart.  I-49 did not continue all the way into Missouri and became US-77 as it passed through a narrow valley and small towns.  A few miles into Missouri the road became I-49 again.  We stayed with I-49 up to where it joins with I-44 east near Joplin, Missouri.  About 10 miles later I-49/US-77 split off to the north and one mile later we exited, crossed over the Interstate, and pulled into the Coachlight RV Park.

The weather was overcast with occasional drizzle for the entire trip but it was a beautiful drive nonetheless.  Eastern Oklahoma is green and rolling and northwest Arkansas adds small mountains to that topography.  The bus ran well all day including the steepest grades.

The Coachlight RV Park is located behind the Coachlight RV Dealership with very easy access.  Linda got us registered but then we had to wait quite a while for someone to move the motorhome in front of us.  Again, we were given instructions on where to go and what to do in the event of extreme/violent weather.  The Park is built into a north-facing slope with wide paved roads behind an RV dealership of the same same.  The RV dealership was the emergency shelter.  Most of the sites are pull-through except along the two outside edges.  All of the sites are wide, long, and level gravel with full hookups including cable TV and Wi-Fi.  The Park has its own well with a water softener so the water at the sites is very soft.  The Park allows customers to wash their rigs so we got out the hose, spray nozzle, and long-handled soft brush and rinsed off the car and the bus as best we could.

We went for a walk around the Park to stretch our legs and stopped by the office to check out the meeting room.  There is a small RV rally here and we got to see the meeting room which was very nice.  For dinner Linda made a macaroni and mushroom dish with onions, garlic, and kale followed by red grapes.  Very tasty.  We watched a few TV shows and called it a day.

 

2015/04/07-09 (T-R) North by Northwest

2015/04/07 (T) Space Nuts

Our friend and Alamogordo tour guide Bell Moore, points to her Gulf War service brick at the Alamogordo, NM Chamber of Commerce.

Our friend and Alamogordo tour guide Bell Moore, points to her Gulf War service brick at the Alamogordo, NM Chamber of Commerce.

We have always been intrigued by outer space and the human desire to go there and learn about the universe so in that sense we probably qualify as “space nuts.”  Indeed our first destination this morning, after picking up Bell at her house, was the New Mexico Space History Museum near the New Mexico State University Alamogordo campus at the northeast corner of town.

The museum sits on high ground at the base of much higher mountains and offered a commanding view of Alamogordo and the Tularosa Basin.  The white sands of White Sands National Monument were clearly visible, including airborne gypsum sand blown into the air by the strong southwesterly winds.  We examined the outside static displays which included remnants of a WWII German V-2 that was test-fired at the White Sands Proving Grounds after WWII, went off course, and crashed just southeast of the location of the present day museum.  Alamogordo was much less developed then than it is now, but it was still very lucky that it did not land in a populated area.

Admission to the museum was $6 per person (senior rate) which was a fair price.  We took the elevator to the 4th floor and then worked our way down using the ramps that connect the floors.  As you might expect, the museum places special emphasis on the role of New Mexico in the development of missile technology and space flight, in particular Holloman Air Force Base and White Sands Missile Test Range (formerly White Sands Proving Grounds).  The museum had an excellent collection of space and missile related artifacts with excellent explanatory signage.  As with most good museums it would have taken a long day, or several shorter visits, to actually read everything.

A view towards Alamogordo from the outside display area at the New Mexico Space History Museum.

A view towards Alamogordo from the outside display area at the New Mexico Space History Museum.

Even with the white gypsum sand blowing in the wind you can see great distances.  It was thus odd to contemplate that the Trinity Site, which lies some 60 miles NW of the museum, might be visible from where we were standing.  This is the place where the first nuclear bomb was exploded and the flash, followed by the mushroom cloud, must have been visible here in Alamogordo, and the sound surely must have been heard.

From the museum we headed north on US-54 towards Tularosa and stopped at the Eagle Ranch aka Heart of the Desert pistachio farm, processing facility, vineyard, and winery.  We tasted a variety of pistachios and sampled five wines.  Two of the wines appealed to us so we bought a couple of bottles of each.  We also bought several bags of the green chile pistachio nut meats.  We drove next door to check out McGinn’s Pistachio Farm and Winery and sampled more nuts, including some pecans.  We only had a few minutes so we did not buy anything and headed back to Eagle Ranch for the 1:30 PM tour.  The tour lasted 45 minutes and we gained some insight into how pistachios are pollinized, harvested, processed, and packaged.  Pistachio trees are not pollinated by bees or insects but rather by the wind.  Because of that pistachio plantations intersperse a mail (pollen producing) tree after every 8th female (nut bearing) tree.  The location of the male trees is offset in each subsequent row so the pollen as the maximum opportunity to find its way to all of the female trees.

The exhaust nozzle of a Saturn V rocket engine.  It is more than wide enough for a person to stand up in it.

The exhaust nozzle of a Saturn V rocket engine. It is more than wide enough for a person to stand up in it.

After the tour we finished the trip into Tularosa to have lunch at the Tulie Cafe.  It turned out to be closed on Tuesdays, so we headed back to Casa de Suenos.  Bell had a cheeseburger and we both had taco salads with beans instead of animal protein.  Bell enjoyed her cheeseburger and the salads were good.  The red and green salsas that came with the warm tortilla chips were excellent.

On the drive back we stopped at the Alamogordo Chamber of Commerce where there is a display recognizing all of the military personnel from the Alamogordo area who served in Desert Storm.  Each person has a brick with their name and rank at the time of their service.  Bell showed us her brick and I photographed it and took a picture of her pointing to it.  We then spent a little time in the small museum before driving Bell back to her house.  Considering that she did not know us very well when we arrived on Wednesday she was a gracious tour guide and enthusiastic ambassador for her home town.

An Army tactical missile and launcher at the New Mexico Space History Museum.

An Army tactical missile and launcher at the New Mexico Space History Museum.

Back at our coach Linda called the Route 66 RV Park in Edgewood, New Mexico to verify that they were open and had spaces available.  The answers were ‘yes’ and ‘yes’ so that is where we are headed tomorrow.  Linda checked the weather forecast and there is a high wind warning out starting tomorrow afternoon and running into the overnight hours.  In light of that information we decided we would leave first thing in the morning and try to get to our destination before the winds really kicked up.  With that in mind we went ahead and hooked up the car.  I then dumped the holding tanks and cleaned the bus windshields while Linda did a small load of laundry.

Although not fancy, Desert Paradise RV Park was an excellent place to stay and we would certainly stay here again.  It is right off the main highway, but tucked behind some commercial buildings and very quiet.  It is convenient to Alamogordo, Holloman AFB, White Sands National Monument, the White Sands Missile Test Range, and destinations in the mountains to the east that we did not visit.  The RV sites are large with easy access, the clubhouse facilities are very nice, and the Wi-Fi was the fastest and most solid we have experienced all winter.

2015/04/08 (W) Moving North and West

Today was a travel day for us which meant we skipped breakfast and coffee.  We only had a little over 220 miles to travel and would normally have targeted a 9 AM departure time.  The weather forecast, however, was for very strong and gusty winds with a high wind warning starting at noon for the area where we would be traveling.  The jet stream was responsible for the wind, having dipped far south over North America and dropped in altitude.  We got up a little after 7 AM and pulled out of our site at the Desert Paradise RV Park at 8:14 AM.

The remains of a WWII German V2 rocket that was test-fired at White Sands Proving Grounds just after the war ended.

The remains of a WWII German V2 rocket that was test-fired at White Sands Proving Grounds just after the war ended.

We took the US-54/US-70 Relief Route that bypasses most of Alamogordo just west of the city.  The drive up US-54 through Carrizozo and on to Vaughn was scenic and uneventful, even with the occasional construction zone.  We were traveling north to northeast so the winds out of the southwest were mostly on our tail and helped push us along.  It also made for a much quieter ride than usual by reducing the net wind speed at our windshields.

Around 11 AM we picked up US-60/NM-285 in Vaughn and turned west.  That is when we got the full brunt of the wind which seemed to be out of the west.  Linda checked the weather for the area and it was showing sustained winds of 34 MPH out of WSW with gust higher.  Driving the bus at 60 MPH into a 30+ MPH headwind is the same, in terms of wind resistance, as driving it 90 MPH through still air.  The bus only has so much horsepower and was not able to sustain 70 MPH into this wind, not that I wanted to go that fast anyway.  I found that both the bus and I did better if I left the transmission in 4th gear and set the cruise control at 55 MPH.  Even with that configuration it was producing more power and higher exhaust gas temperatures than it would have without the headwind.

The view to the west from the 4th floor of the New Mexico Space History Museum.  The "white sands" are visible on the horizon and blowing into the air.

The view to the west from the 4th floor of the New Mexico Space History Museum. The “white sands” are visible on the horizon and blowing into the air.

NM-285 split from US-60 in Encino and headed northwest while US-60 headed southwest.  Our northwesterly track meant we had a strong crosswind component and some headwind.  We continued to climb and the terrain became more steeply rolling hills.  I was able to travel 63 MPH through this stretch of the trip, which was fast enough, and maintain at least 55 MPH on the steeper hills by getting on the accelerator coming down to low points, staying on it up the other side, and dropping the transmission into 4th gear as the speed and RPMs started to drop.

When we reached Clines Corners and entered I-40 westbound we once again had the wind mostly in our face and I decided to run at 55 MPH in 4th gear.  These were the strongest winds of the drive and had also become very gusty which, combined with Interstate highway traffic, made this the most challenging and stressful park of the trip.

Linda poses with the world's largest pistachio.  Note the wind-blown hair.

Linda poses with the world’s largest pistachio. Note the wind-blown hair.

Most of the drive was also a gradual but steady climb which meant the engine was again usually producing more power than it does on level terrain.  We were at an elevation of 4,341 feet ASL in Alamogordo but by the middle of the drive had topped out at over 7,200 feet ASL and never dropped below 6,000 feet ASL the rest of the trip.  That, combined with the wind resistance, meant the engine ran a bit hotter than normal for most of the drive.  Although the engine coolant temperature never rose above 195 degrees F the pyrometers indicated closer to 700 degrees F, climbing to 850 to 900 degrees F on steeper/longer grades and dropping to 300 degrees F (or less) on down slopes. The pyrometers normally run 500 to 550 degrees on level terrain.  The turbo boost also ran a few PSI higher than it normally does on level terrain and often climbed above 12 (on the new gauge) and several times peaked at 15 on the steepest grades.  I rarely see turbo boost readings on the new gauge above 15 and the maximum I have ever seen is 16-17.

Google Earth Pro indicated that we would encounter up and down grades on this route near 6.0% but an average of only 0.9% upgrade overall.  There were many hills on NM-285 that were 4% and several that were probably 6%, but they were short climbs and the bus handled them well.  Indeed, the coach ran very well all day including how it handled the wind.  It was a lot of work for me, but it was doable.

We went on a free tour and bought wine and green chili seasoned pistachios at the Eagle Ranch

We went on a free tour and bought wine and green chili seasoned pistachios at the Eagle Ranch

We took exit 187 off of I-40, looped back to the east on Old Route 66, and a mile later pulled into the Route 66 RV Park in Edgewood, New Mexico.  As we entered the RV Park there was a sign with a phone number to call so Linda called it.  The owners were away from the park but gave us directions on the phone to get into site # 12.  The park is built on a north-facing slope with a sweeping view in that direction and all of the sites are cut from the hillside.  Site #12 had full hookups with 50 A electric and easy pull through access.  It was also very wide so we did not have to squeeze the bus in and could park our car next to the bus instead of behind it.  The site was not perfectly level but it was close enough that we were able to level the coach using the built-in air-suspension leveling system.

The owners returned while I was hooking up the shorepower and Linda was arranging the interior.  She got us registered and then we unhooked the car.  With our arrival chores completed Linda sautéed onions, red bell peppers, and kale and heated up two Tofurkey brand vegan Italian sausages.

Route 66 RV Park has two Wi-Fi signals so I used the Wi-Fi Analyzer app on my smartphone to see how the 2.4 GHz band looked.  As usual there were lots of signals trying to use Channel 6 (in the center of the band), and a few signals at lower Channels, but the park’s second access point was on Channel 11 all by itself, so I connected our WiFiRanger Mobile-Ti to the second access point.  We then got our computers out, powered them up, and got them connected to the Internet.

A close up view of Bell's Gulf War commemorative brick.

A close up view of Bell’s Gulf War commemorative brick.

The wind continued to blow and the gusts increased in strength.  We were both tired and had slight headaches, perhaps from the higher altitude, the stress of driving in the wind, the lack of our morning coffee, or some combination of the three.  Whatever the cause we both drank some water and then took naps.  When we finally got up Linda sautéed some fresh green beans and reheated the last of the seitan mock stroganoff and served them with quartered apples.

After dinner we experimented with different directions for our TV antennas and found one that captured a lot of stations, including the local PBS affiliate.  Given the winds we appreciated the advantage of having OTA TV antennas that are contained in low profile, aerodynamic housings.  We would not have been able to deploy a conventional crank-up antenna under these conditions.

The door of the early 18th century mission church in Old Town Albuquerque, NM.

The door of the early 18th century mission church in Old Town Albuquerque, NM.

I checked the fresh water tank gauge as Linda was doing the dishes and it was below the 1/3rd level.  I got the water softener and separate pre-filter out of the front bay and hooked everything together.  Once I turned on the water I could see that the level in the tank was ~1/4.  It took about 35 minutes to fill the tank and the water softener was depleted by the time it was full.  That means I will have to regenerate the softener, a task I have come to dislike with our present equipment.  Once the tank was full I disconnected everything and returned the equipment to the front bay.  The low temperature for this evening is forecast to be 36 degrees F so I did not want to leave the water filters, softener, and hoses outside with water in them.

Linda read and watched TV while I processed photos from our drive to/from Bouse, AZ back on March 2nd.  We drove through a very strong storm on that drive and captured a few interesting pictures.  I looked at my draft blog posts for early March and decided to consolidate the posts for March 1 – 3.  I got the compilation done but was too tired to upload it to WordPress, integrate the photos, and generate all of the tags, so I went to bed.  The wind continued to blow and gust strongly but I eventually fell asleep to the gentle (sic?) rocking of the coach.

2015/04/09 (R) Albuquerque, New Mexico

The forecast low for last night here in Edgewood, New Mexico was 36 degrees F.  The actual low turned out to be 28 degrees F, so I was glad that I disconnected the fresh water equipment last night and stowed it back in the front bay.  Linda was up before me this morning and when I got up the temperature in the coach had only dropped to 66 degrees.  We were very comfortable in our sweat pants/shirts but I turned on the electric heaters briefly to warm it up a few degrees.  We have not used space heating in quite some time.

One of the many little seculded plazas in Old Town Albuquerque, NM.

One of the many little seculded plazas in Old Town Albuquerque, NM.

I made a pot of coffee and it occurred to me that our mild headaches yesterday may also have been influenced by the lack of our usual morning brew.  Not that we consume a lot of caffeine in the morning.  I usually make 6 – 8 cups of coffee and it is always half decaffeinated beans, so we each get 1.5 – 2 cups of caffeinated coffee.  Not a lot, really, but probably enough that our bodies don’t like it if we skip a day.  Linda made oatmeal for breakfast, after which I uploaded my blog posts for March 1, 2, and 3 (2015).

Linda spent a little time looking at recommendations on RVillage for what to see and do in and around Albuquerque and Santa Fe and did some additional research online.  We decided to head for “Old Town” Albuquerque by way of Historic Route 66.  That turned out to be especially easy as our RV Park is on Old Route 66 which is Central Avenue in Albuquerque and runs right across the southern edge of Old Town.

One of the many very old doors in Old Town Albuquerque, NM.  I think doors make interesting subjects for photographs.

One of the many very old doors in Old Town Albuquerque, NM. I think doors make interesting subjects for photographs.

We left Edgewood around 9:45 AM and drove the 20 miles to Albuquerque on Route 66 which is closely paralleled by I-40.  Route 66 has lower speed limits than I-40, and once we hit Albuquerque we had a lot of stoplights, so it took about an hour to get to Old Town but we got a good look at that part of Albuquerque.  Most of the available parking around Old Town is in pay lots and, not knowing anything about the area and what else might be available, we went into one of the first ones we came to.  We also did not know how extensive the area was or how long it would take to see it so we paid for all day parking.

Our first stop was a plaza with public restrooms.  The visitor information center was in the same plaza and a very nice lady helped us with maps, brochures, and advice based on personal experiences.  Old Town dates from the early 1700’s.  It features a lot of low, (faux) adobe style buildings, but very are historically old.  Most of the shops sold art and jewelry but there were a few were T-shirt shops and places to eat.

SONY DSC

An interesting fireplace under a Ramada in Old Town Albuquerque, NM

We went in one t-shirt shop and saw several things that we really liked.  Just down the street we struck up a conversation with a Native American gentleman, David Ramirez, who had some wonderful paintings that were part of a large scale, long-term project he is working on.  He was from the Chippewa Tribe in Mt. Pleasant, Michigan and attended the University of Michigan in Ann Arbor years ago to study art.  We were very tempted to buy something but we were just at the beginning of our stroll through Old Town and did not want to carry merchandise, so we got his business card with his contact information and decided to ponder whether we wanted to make such a purchase.

From Old Town we continued west on Central Avenue looking for Coors Blvd. NW and then Atrisco Dr. NW and Western Ave. NW which finally brought us to Unser Blvd. NW and the entrance to the Petroglyphs National Monument Visitor Center.  After checking in and stamping our NPS Passport we had to drive another two miles north on Unser Blvd. NW to an area of the Monument where there is a short loop road to stops at two parking lots and provides access to three hikes.  One of the hikes involved a rough path that climbed a couple of hundred feet up a steep hill, but it was worth the effort.  We took our time and saw lots of petroglyphs as well as sweeping views of the Albuquerque metropolitan area far below us to the east.  Indeed, one of the trail markers informed us that we were exactly 5,280 feet above mean sea level.

Some pretty flowers along the trail at Petroglyph National Monument, NM.

A cactus in bloom along the trail at Petroglyph National Monument, NM.

From the Monument we worked our way east over the Rio Grande (river), north on 2nd Street to NM-556 (Roy Ave. NE) which crossed I-25 and became Tramway Road NE.  Tramway took us east along the north edge of Albuquerque towards the Sandia Mountains and then turned south to run along their western base.  Tramway eventually intersected I-40 which we got on going east for the 20 mile drive back to the Route 66 RV Park in Edgewood.  Tramway is so named because of the cable car that operates from a base at the northeast corner and takes passengers up to the top of the Sandia Mountains.  The tram was closed for service but we would not have gone anyway regardless of the price.  Linda does not do Ferris wheels, ski lifts, and cable cars.

When we got back to our coach Linda reconstituted one of the dried Hatch chiles we bought at Hatch Chile Sales in Hatch, New Mexico and used it to season a southwestern style beans and rice dish.  After dinner I worked with the consolidated draft blog posts for the days of the Escapade RV rally but did not have the time to select a few photos from the 3,000+ that I took during the event.  We planned to leave early tomorrow for Santa Fe and Bandolier National Monument and I needed to get to bed.

 

2015/04/04-06 (S-M) Ancient Modern

2015/04/04 (S) Gila Cliff Dwellings

We decided to visit the Gila Cliff Dwellings National Monument (GCDNM) today.  It is only 94 miles from Deming but it is a 2.5 – 3.0 hour drive.  From Deming we took US-180 to Silver City where we picked up NM-15.  NM-15 is placarded as a “mountain road” and crosses the Continental Divide as it runs through the Gila Wilderness to the little town of Gila Hot Springs and then on to the GCDNM where it ends.  It is marked in our road atlas as a scenic road and it was all that and more.  The road itself was an adventure and afforded a range of experiences from dense forest to switchbacks and hairpin turns to distant views as it ran along mountain ridges.  We took our time and enjoyed the ride, stopping to take a few pictures along the way

We crossed the Continental Divide twice today.  This was the crossing on NM-15.

We crossed the Continental Divide twice today. This was the crossing on NM-15.

We eventually reached the GCDNM Visitor Center where we obtain more information about the Gila Wilderness area, the Monument, and the ancient cliff dwellings.  The cliff dwellings are in a canyon about two miles from the Visitor Center.  A road leads from the Visitor Center to a parking lot at the mouth of the canyon.  A ranger gave us an interpretive trail guide and quick overview of what we would see and what would be required to see it.  It turned that we were not in the Monument yet.  We started up the trail by crossing over a small stream on a foot bridge and on the other side actually entered the Monument, which is only about 600 acres.  The Monument, however, is surrounded by the vast and remote Gila Wilderness, so the Monument is there specifically to protect and manage access to the cliff dwellings.

The trail wound up the south side of the creek that runs through the canyon to a point beyond the cliff dwellings, which are all built into natural openings in the south-facing north wall of the canyon, before crossing to the north side of the creek.  The trail was good, but fairly rugged; definitely not a place for wheelchairs or flip-flops.  It also afforded some views of the cliff dwellings.  Once on the other side of the creek the trail climbed steeply and was narrow with steep drop-offs at a few points.  By the time we got to the first of eight compounds we felt like we had earned the right to see them.

There are three aspects to the Gila area with cooperative management.

There are three aspects to the Gila area with cooperative management.

The Gila cliff dwellings are very accessible once you get up to them allowing a close up look at these fascinating remnants of an ancient way of life.  One of the things we learned is that the term Anasazi, which translates roughly as “ancient enemy” is no longer being used to describe the people and culture that inhabited this area until sometime around 1300 AD and built these dwellings.  The accepted name is now Ancient Puebloans, which more clearly establishes the nature of how these people lived and maintains a connection to the Native Americans who still inhabit the southwest U.S. and northwest Mexico, many of whom claim direct descendancy from these ancient people.  We enjoyed our visit to GCDNM and felt it was more than worth the drive.

Native American leader Geronimo and his people lived in this area.

Native American leader Geronimo and his people lived in this area.

NM-15 to GCDNM is a dead end road so some backtracking is necessary on the return trip.  We like to see new things so south of Gila Hot Springs we took NM-35 through Mimbres, back across the Continental Divide, and down to San Lorenzo on NM-152 which we took back west towards Silver City.  Much to our surprise we came upon one the Chino Copper Mine and pulled into a fenced public viewing area on the highway.  Chino is still an active open pit (strip) mine and is an almost incomprehensively large whole in the ground.  After trying to take a few photographs we continued on and took a small side road to Bayard and US-180 and returned to Deming.

We did not get back to the SKP Dreamcatcher RV Park in time for the start of happy hour at 4 PM but we did make it back in time to socialize a bit with folks before everyone went back to their rigs for dinner.  We struck up a conversation with Rick and Mary who had just arrived today.

2015/04/05 (N) Deming to Alamogordo

An HDR image of some lovely green plants on the hike up to the Gila Cliff Dwellings.

An HDR image of some lovely green plants on the hike up to the Gila Cliff Dwellings.

We were up at 7 AM, and a light breakfast, straightened up the bus and took showers.  I ran into Chris Baby in the men’s room (that’s his name).  I met Chris at the recent Escapade at a couple of the Xscapers social events.  He is one of the new generation of 20-somethings that is giving full-time RVing a serious try.  I find it fascinating and refreshing to meet this new generation of RVers.  We hooked up the car and used the restroom by the office one last time.  Linda then called the Desert Paradise MH & RV Park in Alamogordo and they said there was plenty of space and we did not need a reservation.  We visited briefly with fellow RVillage, Rick and Mary, whom we met at happy hour last night.  They had checked our RVillage profile and discovered that we were also fellow Freethinkers.  That would not have happened without RVillage.

I had been indicating in the last few posts that we were headed to Albuquerque, New Mexico from here, and we were actually planning on finding an RV Park closer to Santa Fe.  We changed our minds and decided to visit a friend in Alamogordo, New Mexico and see the sights around there before heading to an RV Park about 20 miles east of Albuquerque.  We had targeted an 11 AM departure but we were ready to go before that and pulled out around 10:45 AM.

The drive over I-10 east to I-25 north to US-70 was smooth and uneventful.  US-70 going east from I-25, however, climbs steadily heading out of Las Cruces and then very steeply for several miles before topping out.  It then drops steeply for many miles into the Tularosa Basin and through the White Sands Missile Test Range.  Once down to the valley floor the road is level across the range running past White Sands National Monument, Holloman Air Force Base, and into Alamogordo, New Mexico.

The westernmost of the Gila Cliff Dwellings.

The westernmost of the Gila Cliff Dwellings.

We did not have any difficulty finding the Desert Paradise MH & RV Park or getting in and parked. The park uses a self-registration process (Iron Ranger) for short-term guests and there was only one rig in the short-term area so we had our pick of sites.  Linda took care of registering us while I connected the shore power and took care of the rest of our exterior/systems arrival routine.

The park has a conveniently located building with two bath/shower rooms, a laundry, and a central club house room with a kitchen in one corner, TV viewing area in another corner, and a library with sitting area in another corner.  I happened to meet the park manager, Wes, while I was in the building and Linda obtained the Wi-Fi password from a women in the laundry.  We connected our WiFiRanger to the Park’s “N” signal and it was solid and fast; as good, or better, than what we normally see with our Verizon Mi-Fi.

A panoramic photo of the open pit Chino Copper Mine near Silver City, New Mexico.

A panoramic photo of the open pit Chino Copper Mine near Silver City, New Mexico.

Although the drive from Deming to Alamogordo was short, both in terms of miles and time, it was hard on the bus and on us so we decided to stick around the coach and rest.  That also gave me a chance to continue working on blog posts and related tasks.  Before settling in to my work I called Butch and got Bell’s phone number and gave her a call.  She was very excited that we were in town and we arranged to meet up with her tomorrow morning.

2015/04/06 (M) White Sands Natl Mon

Bell arrived at our campsite at 8 AM.  We cleaned out the back seat of our Element and found space for a small cooler and three disc sleds.  We gathered up our stuff, loaded it wherever it would fit, and headed to White Sands National Monument (WSNM) about 13 miles southwest of Alamogordo.  The white sands are a unique natural phenomenon.  The WSNM shares management responsibilities with the White Sands Missile Test Range.  The Tularosa Basin is the birthplace of U.S. efforts and the first atomic bomb every exploded was detonated at the Trinity site on the north end of the test range.  This part of New Mexico, with its Puebloan ruins and nuclear facilities is a place where ancient and modern meet and somehow coexist.

We drove the loop road through the dunes twice, stopping at different places to climb, photograph, and slide down on the disc sleds.  The loop road is not paved but, rather, is plowed to keep it open.  WSNM is interesting and different from most National Monuments in that visitors are encouraged to “play” on the dunes.  There are many very large parking areas, picnic areas with sun shelters, a horse staging area, and places where the park rangers hold programs and lead walks.  You can hike out into the dunes and you can even backpack/camp in them (after registering and getting a permit).  This use is permitted because the sands are still being formed and constantly restoring their natural appearance as the move across the floor of the Tularosa Basin.  They are a slow but powerful and persistent force of nature; unique and wonderful to experience.

Almost as amazing as the white sands are the things that manage to grow in them.  The sands eventually obliterate everything in their path.

Almost as amazing as the white sands are the things that manage to grow in them. The sands eventually obliterate everything in their path.

The Visitor Center was not open when we arrived so we stopped on our way out.  We watched the film that was running, stamped our NPS Passport, and then wandered around the gift shop but did not buy anything.  We then drove back towards town and pulled into the Visitor Processing Station for Holloman Air Force Base.

Bell retired from the U. S. Air Force after 20 years of service, so she has access privileges to Base and its facilities.  There is a food court in the Base Exchange building and we ate lunch there.  The commissary and other community facilities were also located in that area but we did not go in any of them.  We went instead to the see the static display of aircraft that have been based at Holloman AFB over the years.  Holloman is a Tactical Air Command (TAC) base, and the 49th fighter wing has flown many different jets over the years, including the McDonnell Aircraft F-4 ‘Phantom’ and F-15 ‘Eagle’, both of which my father helped design (structural engineer).  More recently the YF-117 Stealth fighter was based here and the wing currently flies the F-22.

A panoramic photo of part of the White Sands National Monument.  The loop road only goes through a small portion of the dunes.

A panoramic photo of part of the White Sands National Monument. The loop road only goes through a small portion of the dunes.

Bell, and her husband Jim, were stationed at Holloman 17 years ago when they retired.  The liked Alamogordo and decided to stay.  They own/operate the local cab company (Dollar Cab) which provides transportation services locally and also travels as far as Albuquerque to get people to/from medical facilities and care providers.  They also own Moore’s Auto, a used car sales and automotive service business that is now run mostly by their son.

We were back at our bus by 2 PM and arranged to pick Bell up tomorrow morning at 8:45 AM for another day of sight-seeing in and around Alamogordo.  Being back mid-afternoon I had some notion that I would get a lot of work done on our blog but it was very warm in our coach as we had to leave the roof vents closed due to the strong winds.  We were also both feeling a bit ‘off’ due to the heat and the larger-than-usual lunch we ate, so we turned on the air-conditioners and took naps.

Bell and Linda in front of an F-15 in the static display area at Holloman AFB.

Bell and Linda in front of an F-15 in the static display area at Holloman AFB.

When we got up an hour later we felt better and Linda started researching the U. S. Army Corps of Engineers park at Cochiti Lake north of Albuquerque.  She downloaded and activated Google Earth Pro (GEP) and started looking at routes.  One of the nice features in GEP, which is now free, is the ability to plot a route and get its elevation profile.  We both got involved in looking at possible routes out of the Tularosa Basin (I already had GEP installed on my laptop) and discovered that the only way out that did not involve significant up and down grades was south to El Paso, Texas.  We did not enjoy the drive through El Paso in December and it was the opposite direction from where we want to go.  We had planned to take US-54 north to US-380 west to I-25 north to Albuquerque /Santa Fe but changed our mind when we saw that US-380 is not a designated truck route and has one section with a 10.8% grade (climbing) going west.  Santa Fe is also above 7,000 feet so we started looking for RV park options near I-40 east of Albuquerque.

We had the leftover seitan mock stroganoff for dinner.  Linda found a PBS station and we watched Antiques Roadshow.  She went off to bed to read and I compiled another blog post and uploaded it before turning in.

 

2015/04/01-03 (W-F) The Land of Enchantment

2015/04/01 (W) Hello New Mexico

We were awake at 6 AM, which is not unusual for a travel day, and were up by 6:30.  I went in the house to use the bathroom and instead of beeping once the alarm started beeping continuously.  I found the touch pad and was able to silence it but it left me wondering if I had disturbed Curtis or when the police were going to show up.  Curtis was outside working by 7:00 AM and told me later that he did not hear the alarm and that it “just does that sometimes.”  We did not have breakfast or coffee, which is typical for us on a travel day, and targeted an 8:30 AM departure.  By the time we took showers, finished preparing the coach for travel, and visited with Curtis a little more we missed that target, but not by much.

We wanted to be out the gate before Curtis’s standing 9 AM RVillage team meeting.  By 8:45 we had the bus turned around and lined up with gate and Linda pulled the car up behind it.  At 8:50 we were hooking up the car when Curtis came over to open the gate, exchange final hugs, and go start his meeting.  We were hooked up and finished our light check by 9:05 and pulled out.  As soon as we were clear of the gate Linda texted Curtis while I lowered the tag axle tires and we were on our way.  We made the slow trip through Arizona City on Sunland Gin Road up to I-10 and were headed east at 9:17 AM.

Desert flowers in bloom in Hatch, New Mexico.

Desert flowers in bloom in Hatch, New Mexico.

I set the cruise control at 63 MPH and let the bus roll towards Tucson.  Tucson is not a difficult metropolitan area to transit and soon enough we were on the other side.  The speed limit on most of I-10 in Arizona is 75 MPH except through metropolitan areas and major interchanges.  The bus was running well and as traffic thinned out I bumped the speed up to 65 MPH and then to 68 MPH, and occasionally ran at the speed limit when passing slower vehicles.  At 63 MPH the engine turns ~1,800 RPM and I have long felt that the powertrain and chassis, not to mention the driver (me), are very comfortable at that set point.  The fact that 65 MPH is often the maximum speed limit in much of the eastern half of the country probably contributed to that impression.  What I discovered today was that traveling 68 MPH at 2,000 RPMs also suits the bus, and the driver, very well.

At 12:15 PM MST we crossed the border into New Mexico and entered Mountain Daylight Time, changing the time on my phone to 1:15 PM MDT.  Twenty four miles into New Mexico we stopped for the first time at a Pilot Truck Stop and topped up our fuel tank, taking on 110 gallons of diesel fuel.  It took less than an hour to complete the last 61 miles to exit 85 on the east side of Deming, New Mexico.  From there we had 1,000 feet to the entrance of the Escapees Dreamcatcher RV Park and pulled in.  Linda got us registered and navigated us to our site at 2:45 PM.  The park was only about 15% occupied so parking was easy.

Linda checked us in to the Park on RVillage and I called Butch Williams to let him (and Fonda) know we were finally on the move.  Curtis monitors his RVillage home feed closely, so we knew he would know we arrived safely.  Looking ahead to tomorrow the weather forecast for this area was for sustained winds of 25 – 30 MPH with gusts of 40 – 50 MPH.  Given that forecast we decided to stay tomorrow and head on to Albuquerque on Friday.

Sparky's restaurant in Hatch, New Mexico.  Funky facade and great food.

Sparky’s restaurant in Hatch, New Mexico. Funky facade and great food.

Escapees RV Parks and co-ops have a long standing tradition of 4 PM happy hour so we walked over to the club house/office at 4:15 and found seven folks sitting around a table with their beverages plus the couple that manages the office.  We stayed for a half hour and then went back to our coach to have an early dinner having only had pretzel snacks while we were driving.  Linda prepared a whole wheat linguine with a garlic, onion, and sun-dried tomato sauté and added vegan Italian sausage.  It was excellent, as usual.

Our son had texted us while we were driving and said he would call us later.  He received an e-mail a couple of days ago asking him to get in touch with the chair of the art history department at Eastern Michigan University.  That call took place today and he was offered the assistant professorship for which he has been interviewing these last many weeks.  We were obviously very excited, very pleased, and very proud.

2015/04/02 (R) A Day in Deming

Like many (most) places in the southwest there are lots of things to see/do in and around Deming, more around than in in this case.  The main thing I knew about Deming is that the company that makes the Steer-Safe aftermarket steering stabilizer is located here.  We had their product on our Itasca Sunrise motorhome and it made an enormous difference in the stability and tracking of the Chevy P-30 chassis.  This chassis was notorious for poor ride quality and handling, no doubt exacerbated by the stupid way in which manufacturers used it to create much longer motorhomes than it was designed for with long overhangs behind the drive axle.  Steer-Safe, Henderson’s Lineup, and Banks have, in particular, all made very good businesses out of correcting the deficiencies inherent in this chassis and powertrain (454 cu. in. Chevy big block V-8).  We were obviously excited to find and buy our Prevost H3-40 Royale Coach bus conversion, but I was sorry to see the Itasca go as it handled well and had lots of power by the time we were done spending money on it.

Linda needed to do some grocery shopping and at happy hour yesterday was steered towards Peppers as having better/fresher produce than the Wal-Mart.  She went to Peppers this morning but they did not have many of the things she was looking for so she went to Wal-Mart and said she liked it better.  I guess we got spoiled having access to Albertson’s supermarkets for most of the winter.  Linda called from the store to have me check quantities of ingredients on hand.  She then decided to make her chickpea salad and use it as a filling for small roll ups to take to the potluck dinner this evening.

Another flower in bloom in Hatch, New Mexico.

Another flower in bloom in Hatch, New Mexico.

After lunch we decided to visit the Luna Mimbres Museum in downtown Deming.  You never know what you are going to find in small town museums but we were impressed with the breadth of the collection and the quality of the space and exhibits.  Admission was by voluntary donation so we contributed something.  Once we finished at the museum we drove around town just enough to get a feeling for the place which was nicer in some places and not so nice in others.  In other words, pretty much what we see most places we go with the exception of places like Scottsdale or Lake Havasu City, Arizona where everything appears to be new and very upscale.

As we headed back towards the Escapees Dreamcatcher RV Park in the east end of town we decided to drive the extra 3.6 miles farther east to the St. Clair Winery’s Deming tasting room.  We learned that the Lescombe family has been making wine for six generations starting in France and, for the last 30 + years, here in the Mimbres Valley Appellation of New Mexico.  Their wines are made only from grapes from their own vineyards, with the main one being approximately 46 miles west of Deming.

The free tasting is normally two wines but we were the only customers there initial and Elly let us try small samples of several more, including their sweet and dry “tap” wine.  For under $4 a bottle they will fill your empty bottles with their red and/or white tap wines; sweet, dry, or blended any way you want.  The most unusual wines we tried were infused with red or white chili.  Linda did not care for the white chili but we both liked the red chili.  We are always looking for something that is unique to an area we visit and the red chili wine was what we have been waiting for so we got one for each of our kids and one for us.  Since we got 10% off of six (6) or more bottles we also bought the Mimbres Red, the Nebiola, and the D. H. Lescombe Port.

We had intended to go to the 4 PM happy hour at the RV Park but Linda got busy researching where we might go tomorrow and what we might do there while I worked on another consolidated blog post.  We did, however, remember to go to the potluck dinner where we met other park guests including three people who belonged to RVillage.

We went for a walk after dinner and then settled in for the evening.  I worked on my consolidated blog post for Jan 27-31, 2015.  While I was doing that we both started getting messages from our whole house generator.  Linda checked the utility company map and we were in a small outage area do to “local equipment failure.”  Before I went to bed I received several more messages indicating that the utility power had been restored, the transfer switch had switched power back onto the grid, and finally that the Genset had stopped.  It was good to know that it was performing as intended; that’s why we had it installed.

Hatch Chile Sales in Hatch, New Mexico.

Hatch Chile Sales in Hatch, New Mexico.

Temperatures back home have been warm enough that we are no longer concerned about water pipes freezing if we lose power.  The concern now is the sump pump.  As winter gives way to spring the sump pump runs every few minutes and a failure would be a disaster for our basement.  In addition to the whole house generator we have a secondary sump pump piggybacked on the primary one and set up to run off of a 12VDC automotive battery.

Before going to bed we decided to stick around Deming for a few extra days and use it as a base to visit some sites in the area.

2015/04/03 (F) The Chile Capital of the World

After taking care of some morning chores we drove to Hatch, New Mexico.  Several folks in town (museum, winery) and the RV Park told us that Hatch was THE chile capital of the world and was worth a visit.

We went north out of Deming on US-180 and then NE on NM-26 to Hatch.  Our Rand McNally Road Atlas indicated that this entire trip was a scenic route.  It was a relatively flat drive up a valley with low mountains on either side, and was certainly scenic enough although not in a dramatic, jaw-dropping sort of way.

The front (outdoor) area of Hatch Chile Sales in Hatch, New Mexico.

The front (outdoor) area of Hatch Chile Sales in Hatch, New Mexico.

Hatch was a small, quaint place but busy with people and traffic.  We had checked around and been advised that Hatch Chile Sales was the best place in town to shop for chiles, so we found it and purchased three different kinds.  We go a bag of Ancho chiles, which are dried/smoked poblano peppers, and a bag of dried red Hatch chiles.  We also bought bouquets of small hot pequin chiles, one for us and some as gifts.  Again, this is one of those unique things that we are always looking for as gift items.

We were in Hatch at lunch time and there are several restaurants in town, but we decided to eat at Sparky’s based on the recommendation of several locals and some online reviews.  Sparky’s is famous for their green chile cheeseburger although we obviously did not have that for lunch.  There was a long line to order, but we waited patiently and studied the menu.  We ordered a corn dish, spicy French fries, and chili infused lemonade.  All of them were very good.  There was also a singer / guitar player performing and we enjoyed his music while we ate.

We drove back to Deming by way of I-25 south, taking a short-cut through Las Cruces and back to the Dreamcatcher RV Park by way of I-10.  It was a much longer drive than if we had gone back the way we came, but it allowed us to see that the cut-off through Las Cruces was NOT a good choice for the bus due to lots of road construction with lane closures and shifts.  Even so, we made it back to the RV Park in time for some of the happy hour.  We also decided to stick around for at least another day and do some more sight-seeing in the area.

 

2015/03/27-31 (F-T) Wrapping Up Arizona

2015/03/27 (F) Queen Creek Olive Mill

This is really Linda’s post more than mine.  Lou and I stayed in camp all day working with our information technologies while Linda and Val went on an explore.  I have been using my iPad2 to go through drafts of blog posts dating back to March 1st filling in details, turning notes into complete sentences, and then e-mailing them to myself.  I got caught up as far as that goes and then started writing drafts of posts for the last few days.

Linda and Val made a day if it away from camp.  Linda took our car and drove them to the Queen Creek Olive Mill (QCOM) in Queen Creek, Arizona just beyond the southeast limits of the Phoenix metropolitan area.  QCOM is a large olive grove producing 17 different varieties of olives.  (Technically it is an orchard as olives are a stone fruit.)  The hot, dry desert conditions in this part of the U. S. turn out to be ideal for growing olives.  They are harvested by spreading tarps on the ground around each tree and stripping the olives off.  Olives that fall to the ground naturally are past ripe and are not used.

Once harvested olives are processed within 24 hours.  For pressing into olive oil they are simply washed to remove dust and then pressed (ground or milled, actually), pits and all, to extract the oil.  The mash that remains is used as fertilizer for the trees.  Olives that are destined to be sold whole may be packaged whole in a brine or have the pits removed and replaced with a piece of garlic or habanero pepper and preserved in a brine.

QCOM has a restaurant so the ladies stayed for lunch.  Val had a chopped Italian salad and Linda had a quinoa and kale salad, both of which they said were ‘excellent’.  The Mill also had a gift shop and Linda picked up several things there.

It was late afternoon by the time they returned and neither of them felt like cooking so Lou suggested we go out for dinner and try the Chinese restaurant we intended to eat at a few nights ago when we ended up at the Golden Corral.  We piled into Lou and Val’s pickup truck and set off in search of Big Wa.  Linda had checked the menu online so we knew they had several vegetarian dishes we could probably eat.

Lou and Val had been to Big Wa before and knew approximately where it was but Linda pulled it up on her smartphone and guided us in for a soft landing.  Big Wa was a small mom and pop Chinese restaurant; the kind we used to patronize a lot back home once upon a time.  We rarely go to Chinese restaurants anymore because it is essentially impossible to get anything vegan.  We ordered vegetable Kung Pao stir fry and Moo Shu vegetable dishes.  We suspect that chicken broth was involved in the stir fry and I think the Moo Shu, which was already made up when it came to the table, contained eggs.  We rarely stray from our chosen diet and although doing so doesn’t kill us our systems do not always react well either.  In this case our dishes were mostly vegetables and it was very tasty.

We stopped at Home Depot so I could look for a GE Water filter cartridge and then stopped at Walgreen’s so Val could pick up some things.  It was well past dark by the time we got back and we retired to our respective rigs for the night.  Linda and I watched some TV (Big Bang Theory) and she played online word games while I responded to some e-mails.  Linda liked Queen Creek Olive Mill well enough to enter it in the RVillage Marketplace and recommend it.

A panorama of our motorcoach parked at RVillage World Headquarters in Arizona City, AZ.

A panorama of our motorcoach parked at RVillage World Headquarters in Arizona City, AZ.

2015/03/28 (S) Haircuts

Linda was awake by 6 AM and read quietly in bed.  I was awake before 7 AM and got up, put on my sweats, and made a pot of coffee.  Our two cats climbed up on us to be adored and when they’d had enough of our attention we had some granola for breakfast.  Linda got our last bag out of the freezer so if we want this to last until we get home we will not be having it for breakfast every day.

I have been overdue for a haircut for a while so this morning we finally got the clippers out and Linda lightened the load.  Not that my hair was long, but the daytime temperatures have risen into the 90’s and it is much cooler and more comfortable with my buzz cut.  As long as the clippers were out I trimmed up my beard and shaved.  Linda said I cleaned up pretty well.  🙂

Linda is also way overdue for a haircut but I am not about to attempt that.  She and Val had planned to go to the mall in Casa Grande today anyway, so she did a quick online search and located a hair salon at the mall.  She assembled a short shopping list and added the haircut to it.

While they were gone I pulled together all of my blog post drafts for the period before, during, and after the Escapees RV Club Escapade rally into a single Word doc and attached it to an e-mail to Lou.  He plans to use it as the starting point for an article about the Escapade in the next edition of our SKP Photographers BOF newsletter.

Lou and I needed a break from working with our technology so we put two of our camp chairs in a shady spot with a nice northeast breeze and just sat and relaxed and chatted.  Lou asked about the barn we plan to build and I described the three approaches I am considering.  We were still doing that when the ladies returned home late in the afternoon.  They had both done some shopping so I helped carry bags of stuff into our rig.

Linda made a nice salad for our dinner and Val heated up leftovers for them.  There is a period of time in the late afternoon when the sun shines into the covered porch of the house and is so hot it us uncomfortable to sit there.  Small ants have also appeared with the hot weather so we ate inside at the dining room table.  We lingered for a long time talking before finally retiring to our rigs for the night.

Curtis got a good deal on this Fleetwood Bounder.  He plans to put it in a rental pool.

Curtis got a good deal on this Fleetwood Bounder. He plans to put it in a rental pool.

2015/03/29 (N) Mexico Connection

I made arrangements on Friday for us to visit with Larry and Orene Brown today.  We left at 10 AM to drive to their place northwest of Florence, Arizona.  Larry and Orene are members of both FMCA and Escapees and belong to the Freethinker groups of both clubs, along with several related RVillage groups.  We crossed paths with them most recently at the Escapade and agreed to get together after we returned to Arizona City.  We stopped briefly in Coolidge to buy flowers at the local Safeway and arrived at their place in the Del Webb (Pulte) developed Anthem communities at 11:10 AM.

Larry and Orene are also active in SKP Chapter 8 — Mexican Connection, and will be the wagonmasters for the Chapter’s February 2016 caravan/rally to Puerto Penasco, Mexico on the mainland shore of the Sea of Cortez.  We have not had any desire to travel to/in Mexico, but after chatting with Larry and Orene at Escapade we became intrigued with the possibility of traveling with a good sized group and wanted to know more about it.

Larry gave us a tour of their house and Orene poured small glasses of wine which we enjoyed sitting outside under their Ramada.  Orene made a green salad and vegan chili for lunch.  Both were delicious and enjoyed with some iced tea.  By the time we were done eating the air temperature had warmed past comfortable so we went inside where Orene served fresh strawberries and cantaloupe for desert.

We spent the rest of the afternoon in pleasantly stimulating conversation on a wide range of subjects including, but not limited to, the outing to Mexico next year.  We got a lot of important insights, most of which furthered our interest in going.  We have enjoyed getting to know everyone from our Freethinkers chapter we have had the opportunity to meet and hope to cross paths with Larry and Orene many times in the years to come.

As we wrapped up our visit at 4 PM I got a call from Curtis letting me know that he would probably be arriving tonight between 11 PM and midnight unless he decided to pull in to rest area, in which case he would arrive early tomorrow morning.  Either way it meant that Lou would have to move their 5th wheel trailer so Curtis could park his bus in its usual place.  It also meant someone, most likely me, would have to open the gate when he got here.  I tend to stay up late anyway, but we would obviously do whatever was required to get him in and settled.

As we were getting back to our encampment around 5:30 PM Linda called Lou to have him open the gate.  After we were in and settled we let him know that Curtis would be returning late this evening.  They were in the spot where Curtis parks his bus, so before it got dark Lou hitched up their 5th wheel and pulled it around 180 degrees to the east side of the driveway and pointed towards the gate.  He plans to take their rig to Casa Grande tomorrow morning to buy some tires for the truck and the trailer and have them installed so the rig is positioned for an easy exit.

Having had a nice lunch Linda and I just had hummus with chips and grapes for dinner and watched several episodes of The Big Bang Theory.  Curtis called at 9 PM to let me know he would be arriving around 11 PM.  Linda headed off to bed while I let Lou and Val know that Curtis was definitely arriving yet this evening.  I then settled in to watch TV while I waited for the call to open the gate.  That call came a little before 11 PM.  I opened the gate, waited for Curtis to pull in, closed the gate, and helped him get parked.  I returned the gate fob and house key and we chatted about RVillage and the FMCA rally while Augie got reacquainted with his yard.  Curtis asked if I would take some interior and exterior photographs of his Fleetwood Bounder before we left so he could use them to help advertise it for rent and of course I agreed.  I then retired just before midnight, leaving him to finish unpacking a few things from his bus and car

Another view of Curtis's Bounder.

Another view of Curtis’s Bounder.

2015/03/30 (M) Re-Tired

Since we knew at 4 PM yesterday that Curtis would be returning late last night, Linda started doing several loads of laundry as soon as we got back to camp.  We watched TV and snacked for dinner while the loads washed and dried.  She took the last load out of the dryer around 9 PM and we then folded clothes and made the bed.  She turned in while I waited up to let Curtis in the gate.

I slept in until 8 AM his morning and finally got up when I heard (and smelled) the grinding of coffee beans.  Breakfast was toast and fruit juice.  As planned, Lou and Val left around 9:30 AM to take their truck/trailer to Discount Tire in Casa Grande.  He needed two tires for the truck and two for the trailer.

Although Curtis did not leave Pomona, California until 4 PM yesterday he managed to make the 400 mile drive back to Arizona City in seven hours.  In spite of what was obviously a long day for him he was up and working this morning, although we did not see him until later than usual.  Launching a company is exciting but hard work.

Linda sat at the outside table and chatted with Curtis while I worked on blog posts at my computer in our bus.  By 11:45 AM the temperature in the bus was 85 degrees so I turned the generator on, turned on all three air-conditioners, and closed up the coach.  That kept it cool enough for the cats but I decided to take my computer into the house and work at the dining room table as the house is air-conditioned and quite comfortable.

I had copied all of the posts for January 15 – 21, 2015 into a single Word doc but by the time I finished editing it I decided it was way too long so I split it back up into individual daily posts.  The other reason for doing this was that this was a very busy week during which I took a lot of photographs.  I managed to upload posts to our WordPress blog for the 15th through the 19th.  It was a small dent in what I need to accomplish, but it was something.

Val brought over a glass of fresh squeezed lemonade at 4:30 PM.  By that time my computer battery was run down a bit and I was tired of staring at the screen so I took the computer back to our bus and plugged it in and then joined the others on the veranda to enjoy my glass of lemonade.

Although it gets pleasantly cool after the sun sets, and a bit chilly by sunrise, the hot days have brought out ants and midge flies, compounding the notion that we have probably lingered a bit longer in southern Arizona than is ideal.  On the other hand, we are experiencing this for ourselves rather than trying to understand it second hand.  Also, highs in the mid-to-upper 90’s are not typical for late March in this area, running 15 or more degrees above normal.  That is the old (historical) normal, of course, not the new normal.

Curtis eventually rejoined use around 5:30 PM.  We asked if he wanted to go out to dinner but he was not up for it so we all made and ate our own dinners.  While Linda was cooking and I was wrapping up a conversation with Lou and Curtis I got a call from Butch Williams.  He and Fonda had just arrived home having driven all the way from the Wal-Mart in Forest City, Arkansas.  That same drive took us two days on the way out west in December.  It was 7:30 PM here and 10:30 PM there.

Linda had the TV on while she was cooking and we watched NCIS Los Angeles and other Monday evening programs during and after dinner.  She made a red beans and rice dish and added greens (kale) and crushed red pepper flakes which definitely kicked it up a notch.  I continued working on blog posts while half paying attention to the TV programs.

One last look at Curtis's new Bounder.

One last look at Curtis’s new Bounder.

2015/03/31 (T) Farewell Arizona

As March draws to a close so does our time in Arizona.  We have, and more specifically our motorhome has, been here since December 11, 2014 when we drove from the Escapees Dreamcatcher RV Park in Deming, New Mexico to the RoVers Roost SKP CO-OP near Casa Grande, Arizona.  From there it was on to our winter “home” in Quartzsite where the bus remained parked until March 3rd.

On March 3rd we said our “so long, see ya down the road” to Butch/Fonda, Jim/Barb, and Jim Liebherr, our host/landlord while we were in Quartzsite.  We drove to Arizona City and boondocked at the rental house of Curtis Coleman, founder and CEO of the RVillage social networking website for RVers.  From there we relocated to an RV park in Tucson for a night and then went to the Escapees RV Club Escapade at the Pima County Fairgrounds where we worked very hard as event staff.

After the Escapade we drove back to Arizona City with Lou and Val Petkus, stayed three nights, and then drove over to Why, Arizona for a week to visit Organ Pipe Cactus National Monument.  The four of us then went back to Arizona City to decompress for a week and try to catch up on some computer/Internet-based work.

While we were in Arizona City we managed to drive the Florence-to-Kelvin scenic road with Lou and Val Petkus, tour Frank Lloyd Wright’s Taliesin West (just the two of us), visit an Olive grove/mill (Linda and Val only), visit with fellow FMCA/SKP Freethinkers Larry and Orene Brown (me and Linda), and visit with Curtis when he was there as much as his work permitted.  The daily high temperatures the last few days have been in the mid-to-upper 90’s while only a couple of hundred miles to the north they were just reaching 70 degrees F with lows at or just below freezing.  Our Aqua-Hot is working better than our air-conditioners and we are ready to start moving east and north.

Lou and Val pulled out today at noon for the short drive to Tucson and checked into the Prince of Tucson RV Park where we stayed for one night just before going to the Escapade.  We will depart tomorrow and head to Deming, New Mexico, or thereabouts.  From there we plan to head over to Las Cruces and up I-25 to Albuquerque where we will look for a full-hookup RV park for a few nights so we can explore the area a bit.

From Albuquerque we will push on to Oklahoma City, Oklahoma to visit my only uncle.  A long day’s drive from there will put is in an RV Park near Edwardsville, Illinois not far from where Linda’s sister (Marilyn) and her housemate (Linda) live and a reasonable driving distance from my sister (Patty), niece (Amanda), and her family.  We plan to hang out in the area for a while if folks can make time to visit with us and keep an eye on the weather and road restrictions in southeast Michigan.

Another day’s drive will put us at Butch and Fonda Williams’ place in Twelve Mile, Indiana; the place from which our two two-bus caravan departed for the southwest on December 3rd, 2014.  We will likely linger there a few days and try to figure out what is going on with our two front air-conditioners.  Once we leave there our final stop will probably be an overnight at the Turkeyville Campground south of Lansing, Michigan where we can dump our holding tanks in the morning before driving the last 80 miles to our house.

With the hot temperatures have come bugs so we spent a long evening inside the house having a relaxed conversation with Curtis and getting to know each other better.  It was the first time we have had a chance to talk to him without RVillage being the focus of the conversation.  We opened the bottle of Black Currant wine we bought at the Forestedge Winery in Laporte, Minnesota in July 2013 and remembered why we bought it and why we brought it along.  It was nice to share it with our new friend.  We finally went back to our coach at 9:30 PM, had an easy, light supper, and went to bed.

 

2015/03/26 (R) Taliesin West

[Note:  Photos are in an image gallery at the end of this post.]

Although I have never written down a bucket list, I have a mental one, and one of the things on my list was to visit Taliesin West, Frank Lloyd Wright’s winter camp in Scottsdale, Arizona.  We have toured Taliesin in Wisconsin and Fallingwater in Pennsylvania as well as his home/studio, Unity Temple, and some 15 houses in and around Oak Park, Illinois, the S. C. Johnson building in Racine, Wisconsin, and the Guggenheim Museum in New York City.  I am a long-time, big fan of his architecture.

Scottsdale is a suburb located ENE of Phoenix and ~70 miles north of Arizona City.  Since we knew we would be hanging out in Arizona City for a week we decided a couple of weeks ago that we wanted to take the “Behind The Scenes Tour” and purchased two tickets for the 9:15 tour today.  We set our alarm clocks for 6 AM and left camp at 6:45 AM.

We had researched coffee shops last night and had an address for a Seattle’s Best not far from Taliesin West.  We left early enough to go there and enjoy coffee and a bagel and still get to Taliesin West on time.  Or so we thought.  We used our GPS to navigate to the coffee shop, fighting our way through stop and go traffic, construction, and general urban congestion only to discover that it was no longer there.  By that point we did not have time to try the alternative location we had identified so we just went on to Taliesin West.

We arrived at 8:30, took care of getting our tickets in the bookstore, and then grabbed a table by the outdoor coffee kiosk which did not open until after 9 AM around the time our tour began.  Why the kiosk was not open much earlier was a mystery to us, but whatever the reason, it meant no coffee for us this morning 🙁  They did supply bottled water for our tour, however, which was appreciated.

The tour took three hours and we got to see some areas of the camp that folks on shorter tours do not.  That included a stop at the dining room where we were served a light lunch of fresh fruit, a small croissant sandwich, and a date nut bar and “Arnold Palmer” to drink.  A women who apprenticed under Frank Lloyd Wright, and still lives at Taliesin West, visited with us during lunch and shared personal reflections about her life.

The most interesting thing to me about Taliesin West was learning that FLLW regarded it as his “winter camp” and that most of the original construction was open to the outside and “rougher” than we have seen at other sites.  When construction began in 1937 there was no road to the site, which sits on high, sloping ground at the base of small mountains.  There was no electrical power, no water, and no heavy equipment; everything was done by hand.  They used kerosene lanterns and candles and trucked the water in.  Shutters allowed buildings to be closed off from the weather or light if desired, or opened to admit a breeze or reveal the night sky.

Windows were eventually added to some buildings at the insistence of the 3rd Mrs. Wright and many of the spaces now have air-conditioning.  As buildings were added and others reshaped or repurposed over time Taliesin West took on a more refined quality but its origins and use as a winter camp are still very evident.  Like his home/studio in Oak Park, Illinois and his estate at Taliesin, Taliesin West was a living laboratory for his ideas about the way architecture should/could connect people to the place where they live and actively enhance the quality of their lives.

We spent a few minutes in the bookstore after our tour.  The items available from the FLLW Foundation are very nice but we did not buy anything as we trying not to collect things at this point in our lives.  We had done research on vegan restaurants and found one in Tempe, just south of Scottsdale, which had a nice menu and good reviews on Happy Cow.  Before going to lunch we used our GPS to navigate over to RV Solar Electric.  For the second time today we discovered that a business did not appear to exist at the address given on the website.  I called the phone number and talked to owner Doug Kirkby who indicated that they were an online only store and the address was a storage bay where they warehouse their products, and was, indeed, at the location indicated by our GPS (but on the other side of the street).  I had overlooked that little detail on their website, but it wasn’t far from Taliesin West and we were only going to window shop anyway, so we hopped on Scottsdale Road and headed south to the restaurant.

The New Green American Restaurant was on the south side of the Arizona State University central campus and we had an up close view of Scottsdale, which is a very upscale place, on the drive down.  With the exception of Sublime restaurant near Ft. Lauderdale, Florida our experience with vegan restaurants is that they are usually slightly funky little places near college campuses and New Green American was no exception.  We studied the menu, made our selections, stood in line, placed our order, took our number placard, and found a table to sit and wait for our food which did not take long to arrive.  I had a mock breaded fish fillet po’boy and Linda had a mock chicken marinara po’boy, both with savory French fries lightly seasoned with Thyme.  The food was very tasty.  The also had almond milk milkshakes.  Linda had a chocolate one and I had strawberry and they were a real, and rare, treat.  It’s probably a good thing that we do not have a vegan restaurant like his anywhere close to where we live as we would eat out too often.

By the time we got back to camp it was pushing 4 PM.  We had left windows open and fans running to keep it comfortable enough for the cars and left the door unlocked in case Lou or Val needed to get in.  By 5 PM our rig was partly in shade and as the afternoon gave way to evening it cooled back down to a more comfortable temperature. We left the windows and ceiling vents open all night but I turned off the exhaust fans before I went to bed.  By the time we got up in the morning it was chilly enough inside the coach that we put on our sweats for a while.  But that’s a story for another day.

.

2015/02/19-23 (R-M) Solo in Q

2015/02/19 (R) Over-Cranked

I have been busy cleaning/waxing the outside of the bus and writing articles so I have not been able to spend much time writing my blog posts or uploading them to our website.  A couple of weeks ago I uploaded the posts through the end of December 2014 but then we got busy and I have not uploaded anything since then.

Here is how my day went.  I Got up at 7:30 AM and had granola with fresh blueberries for breakfast.  It was cloudy and cool most of the morning, so I tried to focus on the bus cleaning/waxing and was able to clean and wax the passenger side of the bus from the front to the back edge of the dinette fixed window.

Another dramatic sunset reflected off the recently waxed driver's side of our coach.

Another dramatic sunset reflected off the recently waxed driver’s side of our coach.

The whole house generator at home runs a self-test every Thursday at 11 AM (EST) and e-mails its status to us.  Instead of getting a message at 9 AM I got one at 9:10 AM (MST).  The message was an Over Crank fault indicating that the Genset had failed to start, had dropped out of Auto mode, and would not attempt to restart until the controller was reset to clear the fault.  I did not assume that Linda had paid any attention to the details of the message so I called her.  She called Bratcher Electric and they told her how to reset the controller.  They also said they had received similar notifications/calls from other customers.  Sure, the temperatures have been below negative 10 degrees F, but the whole reason we have the generator is to protect us against power loss which usually occurs under the worst weather conditions.  The service technician is coming out on Wednesday to check the unit, which is still under warranty.

I took a lunch break at 2PM and had a jumbo tofu hot dog and some hummus with a few Fritos corn chips.  For most of the rest of the day I worked at my laptop selecting and editing photos for my Quartzsite 2015 BCM article.  I made a quick trip to the Road Runner market for some 26 ounce containers of salt and stopped at Herb’s Hardware store looking for a clear filter housing, but they did not have any.

I made a nice, large salad for dinner and finished up the box of Franzia Refreshing White wine.  I continued to process photos for my article late into the evening, taking an occasional break to check e-mail and check out the SteelMasters website.  They sell steel Quonset hut style building kits and this might be a more economical way to build our bus barn, and easier as a do-it-ourselves project.

2015/02/20 (F) Touch of Oranges

I was up late last night so I slept in until 8 AM this morning.  I awoke to cloudy skies and cool temperatures so I skipped breakfast and got right to work cleaning/waxing the passenger side of the bus, which faces south and gets a lot of sun.  I have been working front to back but decided to reverse direction.  The reason was to do as much of the side aft of the patio awning as possible while it was cloudy.  The area under the patio awning is shaded (by the awning) so I can work there anytime I feel like it.

Butch was working on their new VDO electronic speedometer and needed to borrow my air-over-hydraulic bottle jack so I dug it out of the front bay for him.  Mid-morning Lou and Donna Rice stopped by to say “hi.”  They were in town looking for newspapers that Lou could use to mask off their motorhome so he could spray some paint.  It just so happened that there was a large box of newspapers over by the trash container and they were able to get all that they needed at our campsite.

The sunset in Q backlights Saguaro cactus, a palm, and a Palo Verde tree.

The sunset in Q backlights Saguaro cactus, a palm, and a Palo Verde tree.

I quit cleaning/waxing around 11:45 AM and turned my attention to the water softener.  I have regenerated it twice this week, first with solar salt and then with non-iodized table salt, but the water coming out of it is still testing in the 3 – 7 gpg range.  A reading of 7 is considered ‘hard’ so at this point I am not very happy with our water softener.

I filled the filter housing with yet another 26 ounces of finely ground non-iodized table salt and started the regen process for the third time this week.  This time I ran the water more vigorously for a short time and then slowly (two minutes per gallon) and checked for salty water from the outlet of the softener.  When I got very salty water I shut off the flow and let it sit for an hour.  I repeated this a couple more times.  When I took the filter housing off there was very little salt left in the bottom.  I rinsed it out, reinstalled it, and ran water through the unit at the rate of four minutes per gallon for one hour, figuring 15 gallons of filtered water should be enough to flush the saltiness out of the softener.  I tested the discharge water from the softener and it measured somewhere between zero and 1.5 gpg TH.  It should have been zero, but I do not know if the test strips are sensitive to residual salinity.  This process took all afternoon, intermixed with my computer and bus waxing work.

I had granola with fresh blueberries for lunch and then finished yesterday’s post and started this one.  I settled in to work on photographs for my article with periodic breaks to check the water softener.  It was more sunny than cloudy from noon to 2 PM at which point the clouds thickened and filled in.  The air was warm but not hot and the conditions were ideal for cleaning/waxing the “sunny” side of the bus.  That is what I did until 5:45 PM, with a short break to talk to Linda on the phone.  I should be able to finish the waxing tomorrow, put a second coat of Carnu-B Coconut Creme on the passenger side tires, and put a first coat on the driver side tires.

I cleaned up all of my supplies and materials, washed up, and had a few corn chips and hummus as an appetizer.  I washed some red grapes for later and got out an orange.  I have a lot of grapefruit and oranges on board at the moment and try to at least one of each every day.

This was a very dramatic sunset.

This was a very dramatic sunset.

Speaking of oranges, Barb has been using a pair of products from Touch of Oranges; Touch of Oranges Wood Cleaner & Re-conditioner, and Touch of Beeswax Wood Preserver; http://www.TouchOfOranges.com.  I went to their motorhome yesterday to see how it works and the results were quite impressive.  I thought about ordering some but decided not to for several reasons.  For one, we already have Murphy’s Oil Soap Wood Cleaner on board.  It has orange oil in it and I would like to do a side-by-side test.  For another, we are getting too close to our departure date to risk a delayed delivery.  Finally, we don’t have time to use it before we get home anyway.  I might order some in May if I like the way it works better than the Murphy’s product.

I made a fancy salad for dinner.  We bought a large container of mixed salad greens on Monday and I need to have salad every day in order to use it up before it goes bad.  I found carrots and mushrooms in the fridge that needed to be used, so those went on the salad along with dried fruits, peanuts, Daiya pepper jack “cheese” and other yummies.

I continued processing photos after dinner.  By 10:30 PM I was too tired to concentrate and went to bed.

2015/02/21 (S) Facetime with Madeline

I was awake off and on starting at 6 AM and finally got up at 7:15 AM.  The Yuma Hamfest started yesterday and runs through tomorrow but I have too much to do here to spend three hours driving just to window shop.  Besides, Butch had to leave early this morning for a rock and mineral swap meet to try selling some of the equipment they have purchased and decided not to keep.

I did not have coffee yesterday so that was my second task this morning.  My first task was getting the cats their food and water and cleaning their litter tray.  I had granola with raisins and fresh blueberries for breakfast and then sat and enjoyed my coffee while Jasper sat beside me on the couch and groomed himself.

The sunsets in Q were usually good but this one was better than usual.

The sunsets in Q were usually good but this one was better than usual.

It was cool again this morning with a thin cloud layer so as soon as I finished my coffee and checked my e-mail I got to work on the outside of the bus.  That was at 9:15 AM.  It took me until 11:45 AM to finish the passenger side of the bus and apply a coat of Carnu-B Coconut Creme to the driver side tires.

I finished the hummus for lunch with the help of a few Fritos corn chips.  Afterwards I called Jeff to check on our coffee order.  He said it was in the mail but went out a few days later than expected.  He said he expedited the shipping because of that and was supposed to e-mail the USPS tracking number to me.  I then went over to Jim and Barb’s rig and asked if I could test their Touch of Oranges products.  Barb lent me both the wood cleaner/restorer and the beeswax wood preserver along with pieces of terry cloth for each and a piece of 0000 steel wool.  I set those aside and worked on my Quartzsite 2015 article for a while.

I took a break from working at my computer to test the cleaning products.  Following the directions, I sprayed the left side of the kitchen base cabinets with the cleaner/restorer, waited two minutes, rubbed it with steel wool (with the grain), and wiped it off.  I then applied the beeswax preserver with a piece of terry cloth and let it sit for one hour.  While the beeswax product was soaking in I went over and visited with Butch and Fonda.  While I was doing that I got a TXT message from Linda asking if I wanted to Facetime. That meant she was back at the house and had grand-daughter Madeline with her.  I indicated that a little bit later would be better.

My one hour wait was up so I excused myself, went back to my coach, and wiped down the left side of the cabinet.  I then used the Murphy’s Oil Soap Wood Cleaner (with orange oil) on the right side of the cabinet.  The results did not compare favorably with the Touch of Oranges products which definitely improved the appearance of the wood.

I turned on our Verizon MiFi, switched my iPad to it, and then called Linda to set up the Facetime session.  Either I never configured the Facetime app or failed to reconfigure it but it would not let me log in.  Once I got the correct e-mail address and password set up it worked fine.  I called Linda’s iPad and when she answered I got to see Madeline.  When Linda picked her up earlier today Madeline said she was going to grandma and grandpa’s house to see grandma and grandpa.  Linda explained that I wasn’t at the house but Madeline could still see me in the bus using the iPad.  It is a fabulous technology, and fascinating to see how completely natural it is for a 2-year old.

I have enjoyed creating panorama images this winter using MS-ICE.

I have enjoyed creating panorama images this winter using MS-ICE.

Bill Stewart from our FMCA Freethinkers Chapter had requested to see some photos from the recent gathering at the Peg Leg boondocking area near Borrego Springs, California.  Last night I selected seven images, re-sized and processed them, uploaded them to the Freethinkers folder in my Dropbox, generated the “share” link, and e-mailed it to our open forum e-mail reflector.  While I was working on that it occurred to me that Lou Petkus is always looking for images for the SKP Photographers BOF newsletter and member album and I had not sent him anything in a while.  I was too tired by then to do the work so I put that on my “to do” list for today.

I spent most of the rest of the afternoon and evening working on my article and the photos that go with it except for a break to photograph a beautiful sunset.  Linda called around 6 PM (8 PM at home) to chat.  She suggested that we wait to see if someone at Escapade is selling the Touch of Oranges products.  She also suggested that I check to see if Carnu-B is going to be at any car shows near us as they sell the product for a lot less at shows than they do online.

I took a break for dinner and microwaved a jumbo tofu hotdog and a potato.  The potato had started sprouting so I figured I needed to eat it or plant it.  I had been accumulating dishes and utensils for the last few days so I washed, rinsed, and dried all of them.  By the time I finished my chores, played a few games on my iPad, and finished this post it was midnight.  Completing the waxing of the bus was an important milestone, and although I have a lot more to get done on the bus this coming week I plan to take it easy tomorrow and try to wrap up my Quartzsite 2015 article and perhaps some other writing.  The most I may do to the bus is apply some more Carnu-B Coconut Creme to the tires.

2015/02/22 (N) Q 2015

I did not use up the second package of blueberries fast enough and they started to go bad.  I picked out the bad ones, rinsed off the rest, and had some granola with my blueberries for breakfast.  I worked for a little while finishing up yesterday’s blog post and then got to work at my computer.  It was cloudy and windy when I got up and the winds continued to strengthen during the day.  I had closed the vent fan domes last night so I would not have to listen to them rattle.  The patio awning was flapping more than I liked so I got Butch to hold the strap while I released the rafters and then rolled it up and latched it.  I was able to retract the small passenger side bedroom awning by myself.  In the light of day I discovered that I had not wiped the Carnu-B wax off of the body as completely as I thought.  That, however, will be a task for another day.

I wanted to make a sandwich for lunch but I was out of onion so I went to the Road Runner Market to get one.  I also wanted pretzels and hummus.  They did not have any hummus and they did not have the kind of pretzels I like but I was able to get two large sweet onions.  Sourdough bread with Tofurkey brand mock deli slices, Daiya cheddar “cheese” slices, veganaise, honey mustard, fresh onion, and salad greens made a tasty treat.

I finally finished my Quartzsite 2015 article for Bus Conversion Magazine, including the 95 photos and captions, and uploaded it to my Dropbox for proofreading.  I had an e-mail back from Gary indicating that they would probably use it for the February issue, so very late this evening I uploaded all of the photo files.

A panorama created using MS-ICE from handheld images.

A panorama created using MS-ICE from handheld images.

About the time I needed to take a break Fonda left for church and I saw Butch sitting outside with his camera.  Another beautiful Quartzsite sunset was taking form so I grabbed my camera and shirt jacket and went out to join him.  It had been cloudy and windy all day and was rather brisk.  We both worked the sunset until it was played out and got some nice photos considering that they were all handheld in low-light conditions.

For dinner I made a Thai Kitchen Noodle Bowl and added some honey roasted peanuts.  I closed all of the bus windows to a crack and made some hot tea.  Tea is still my beverage of choice with any type of Asian cuisine and was very satisfying on a chilly evening.

With the Quartzsite 2015 article done (except for corrections) I started pulling together the “featured bus” article on Byron Pigg’s 1985 Model 15 Eagle bus conversion.  I went through the photos I took last month of his coach at the Eagles International Bus Rally and was pleased that I had a good variety with good technical quality to choose from.  I made my selections, post-processed all of them, and inserted the small versions into the Word doc.  The article narrative itself was less than one page in length as I do not know very much about Byron and his wife Betty or their bus.  The Word doc template I use for featured bus articles includes two “Specifications” pages, one for the bus and one for the conversion, so the article was three pages.  I e-mailed the Word doc (with embedded photos) to Byron and cc:d Gary at BCM.  In order to complete the article I need Byron to fill in a lot of the details about his bus and conversion.

2015/02/23 (M) Seizure

Toast with apricot preserves is as close as I get anymore to the Danish pastries that were once one of my favorite treats, but I am OK with that.  I am absolutely enjoying retirement more as a result of being much healthier and more active, both of which are a direct consequence of eating better, weighing less, and not having to take a cocktail of drugs every day.  Toast, coffee, and a little fruit juice makes a very agreeable breakfast.

I finished up yesterday’s blog post after breakfast and then got into my computer-based work.  I had planned to work on the photos of Larry and Carol Hall’s GM PD4106 bus conversion and write a brief narrative, similar to the one I did on Byron and Betty’s Eagle bus, but other things kept interfering with the work.  Except for lunch and dinner breaks, and brief chats with Barb, Butch, and Fonda, I sat on my butt most of the day working away at my computer on a template for featured bus articles but had very little to show for it at the end of the day.

I have learned over the years to stick with sunsets until it is dark.

I have learned over the years to stick with sunsets until it is dark.  Panorama stitched together with MS-ICE.

For lunch I had the last jumbo vegan hotdog in the open pack.  They microwave nicely, so they are quick and easy to fix, and are so yummy with honey mustard, pickle relish, and chopped sweet onion.

I had not yet seen the e-mail from Jeff at Teeko’s Coffee and Tea in Howell, Michigan with the USPS tracking number for my coffee order so I call them at noon (2 PM EST) and Mary gave the number to me over the phone.  It only occurred to me much later that the e-mail may have gotten trapped by our spam filter.  I direct all of the notifications from the spam filter to a special inbox and I have not made a habit of checking that inbox or going into the filter to release or delete the e-mails that are being held.

Butch and Fonda drove over to Bouse this morning to talk with the General Manager and park managers of an RV Park about working there next season.  They stopped at our shared P. O. Box on their way back and then went to the main office downtown.  When they got back to camp they had my coffee shipment and an envelope from Dan Fregin, the treasurer of our FMCA Freethinkers chapter.

At one point in the afternoon I looked out the picture window by the dinette, where I sit and work at my computer, and Roho was lying on the ground with Jim and Barb and Jim L. gathered around him.  He appeared to be twitching and Barb confirmed that he was having a seizure and typically has one once a month like clockwork.  We had a dog with Epilepsy (Scout) and it did not turn out well.  The standard treatment at the time (18 years ago?) was phenobarbital, the same drug used to control the condition in humans.  Scout did not respond to small doses and the amount we had to give him eventually destroyed his liver.  But we had no choice; he went into a grand mall seizure one night and would not come out of it.  We had to take him to an emergency veterinary clinic at 2 AM and they had to inject him with phenobarbital and something else to get the seizure to stop.

We had just started him on an experimental treatment using potassium bromide (KBr) dissolved in flavored pancake syrup when his liver failed and he died.  I told Barb about this but I did not know if the KBr treatment had become standard practice or not.  The apparent effect of the KBr was to mediate the uptake of the phenobarbital, allowing much smaller doses to be much more effective.  I searched online later and found that KBr has, indeed, become part of the standard treatment arsenal for canine and feline seizures.

For dinner I made a big green salad.  While pulling ingredients out of the refrigerator I found a bunch of asparagus that was spoiled so I threw it out.  That was too bad because I really like asparagus and this bunch probably came from the farmers market where we have bought very good produce.  I also had to throw away some blueberries and carrots this week but managed to salvage some of each.  I did, however, finish up the mushrooms in my salad.

Atmospheric conditions make all the difference in sunrise and sunset photography.  Panorama stitched with MS-ICE.

Atmospheric conditions make all the difference in sunrise and sunset photography. Panorama stitched with MS-ICE.

Linda called around 7 PM (my time) and we brought each other up to date on how our days went.  Around 8 PM I prepped the remaining strawberries for later and then heated an Amy’s vegan tamale with Mexican rice.

I finally put aside the featured bus article template I worked on much of the day and started selecting and processing the photos for the article on the Hall’s bus.  By that point, however, I was tired and frustrated and making mistakes so I went to bed.  The southerly winds that brought the rain had shifted to the northwest bringing cool, clear air with them.  It had cooled off enough in the bus that I turned on the electric heating pad for the first time in quite a while.

 

2015/02/14-18 (S-W) Busy Times in Q

20150214 (S) The Lights of the City

Note:  There are no photos for this post.

We stuck around Q today.  While driving through Borrego Springs yesterday afternoon we came upon the Sea View roadside fruit stand.  It was on the northeast corner of an intersection north of town surrounded by citrus and palm orchards.  The stand had 5 pound bags of tangelo oranges and 10 pound bags of jumbo grapefruit for $3 per bag; self-serve.  We stuffed $6 in the collection box and took one of each.  We had grapefruit for breakfast this morning and several oranges throughout the day.  After breakfast Linda went for a morning walk and I settled in to work at my computer on Bus Conversion Magazine articles.

We had planned to drive to Sara Park in Lake Havasu City mid-afternoon for the Western Pyrotechnic Association fireworks show but decided we would go tomorrow instead.  We were tired after our whirlwind 2-day visit to California and did not feel like making the 150 mile round trip.  Larry and Sandy drove up to see the show on Friday evening and said it was spectacular.

For dinner Linda made pan-roasted Brussels sprouts with balsamic vinegar and honey, quinoa, and mashed Romanesco brocciflower with salt and pepper.  A small glass of white wine completed the meal, which we ate outside, and it was all delicious.

We had just finished eating when Butch and Fonda brought their chairs and their dogs over.  They have gotten deeply involved in the Quartzsite Road Runners Gem and Mineral Club and we have been busy with travels so we have not had as much opportunity to chat as when we first got here.  We sat and talked until long after the sun set.  It still cools off here when the sun goes down but not as quickly or as much as it did in December and January.  With proper clothing or a light blanket we can now sit outside well into the evening.  Even with the lights of the city the stars are bright and numerous.  Once we came inside we did our usual evening things for a while and then went to bed.

2015/02/15 (N) Winterfest 2015

We had a quiet morning at home that included the last of our Ethiopian Yirgacheffe coffee beans and some of the grapefruit we bought on Friday.  One of the couples we were visiting with on Friday, Steve and Liz Willey, started, owned, and operated Backwoods Solar in Idaho for many years.  They sold the business a few years ago but they still carry copies of the Backwoods Solar Planning Guide and Catalog when they travel.  Much of the information in the planning guide section was written by Steve and he gave me a copy of the 2014 edition.  We had exchanged several e-mails about a solar system for our bus so he knew I was interested in the subject.

I spent the entire morning reading through the Backwoods Solar book while Linda checked up on the state of the world, the weather back home, and, finding no good news, went for a walk.  I checked my e-mail at 1 PM and then started getting ready to leave for Lake Havasu City at 1:30 PM.  Today was the final day of the Western Pyrotechnics Association 26th annual conference which was also billed as Winterfest 2015.  The gates opened at 3 PM and we wanted to be there by then so we could get a good spot for our chairs.

The ground displays were set up in the infield of the small Havasu 95 Speedway.  Like most race tracks it had a high, curved fence surrounding the track.  We entered from the east and by bleachers that were there facing west towards the mountains and, way off in the distance, the Colorado River.  To either side of the bleachers were large areas where spectators could set their own chairs.  We put ours to the left up against a border fence designed to keep spectators about eight feet back from the track fence.  The aerial displays were launched from beyond the other side of the track.  That area sloped downhill away from track so that the firing stations were not visible.

The sky was clear, the air temperature was warm but not uncomfortable, and the sun was hot.  We brought a lightweight blanket to protect us from the chilly night air that would inevitably occur after sunset but we hung it on the fence as a sunscreen which kept the sun off of our legs.  Although our Tilley hats could shade our heads and faces, we also had two small umbrellas that we brought just for this purpose.  With all of our sun paraphernalia in place we relaxed, snoozed, and waited which was actually a very pleasant way to spend the afternoon.

We eventually got hungry.  Given that the venue had food vendors and bathrooms we did not have a reason not to eat.  Our choices were popcorn, soft pretzels, and veggie burgers with lemonade to drink.  Unlike a lot of closed venues, the food was not overpriced and all of the workers looked to be high school age.

Just after 6 PM the sun slipped behind the small mountain range nearest to the track and we put our umbrellas away and took down our blanket.  Although it was still daylight the crews started shooting off small aerials sporadically.  By 7 PM the sun had set and there was a beautiful glow along the distant mountains.  By 7:30 PM it was dark and the fireworks got started in earnest around 7:40 PM.

A local radio personality served as MC.  Being a Western Pyrotechnics Association event it was different from other fireworks displays we have seen over the years.  Before the main (commercial) display began they shot off shells and ground displays that had been made by WPA members in workshops during the four days of the Association convention.  They were shot off (or lit) one at a time and the MC announced the name of the builder and type of firework.  Most of us just watch a fireworks display and say “ooh” and “ahh” at the appropriate times, and maybe clap for a particularly impressive burst.  Not surprisingly, however, the things we are watching all have names.  Indeed, pyrotechnics has its own specialized vocabulary but most of us are never exposed to it.  It made for an interesting as well as entertaining evening.

As the evening went on the air temperature cooled off and the fireworks heated up.  We put on our shirt jackets and threw our blanket over our legs.  The two professional displays were done by the Not Yet Ready For Prime Time Players and AM Pyrotechnics.  The NYRFPTP show was all done from the infield and was very interesting.  The AMP show was all large aerials that were shot one at a time.  The main reason for this was so the buyers in attendance could see each shell by itself, but it had the same benefit for the other spectators and had the added benefit of extending the show without overloading the senses.

When the main show was finished around 8:30 PM most of the audience left, but WPA members were instructed to come to the launch areas and finish shooting off their products.  Some people sitting next to us had advised us to stick around, so we did.  By 8:45 PM more fireworks were being launched and lit and that was still going on when we finally packed up at 9:30 PM and headed back to the car, which was parked right by the entrance to the track.

There was a soundtrack but the fireworks were not synchronized to it.  Perhaps the best part of the evening was that we were much closer to the ground displays and launch sites than is usually the case at a major Fourth of July celebration.  One of the “effects” was a “wall of flame” that was set off on the far side of the track.  I do not know what they used for fuel but we felt the heat where we were sitting!  An interesting side note was that the larger aerial “bombs” (technically “salutes”) kept triggering car alarms.

We drove home in the dark but it was not our first time driving this route and traffic was light at that hour.  We got back at 11:15 PM, checked e-mail, and headed off to bed.  If we are back in this area again at this time of year we would likely position our coach closer to Lake Havasu City and attend the fireworks display all four nights.  As with many other things this winter it was a new and unique experience.

2015/02/16 (M) Travel Preparations

With the Western Pyrotechnics Association fireworks display last night at Sara Park in Lake Havasu City our sightseeing and tourist activities in and around Quartzsite came to an end.  Linda is flying home tomorrow for two weeks to deal with corporate accounting and both corporate and family tax returns.  That meant today was spent getting her ready to leave and me ready to have her gone.

After our usual coffee, juice, and granola breakfast we drove to the Albertson’s supermarket in Blythe, California to stock up on grocery items for me.  We bought lettuce so I can make salads, but we bought a lot of prepared/packaged vegan foods that do not require much cooking time or technique and have minimal cleanup.  While Linda has a lot to do back home I also gave an ambitious list of things I want to accomplish while she is away.  I also want eat well while she is away, but I do not want to spend a lot time cooking and cleaning up.

At the top of the list are six or seven small, but critical, bus projects.  Right behind those is to finish cleaning and waxing the passenger side of the bus.  We have acquired a certain amount of “stuff” since we got to Q and it needs to be organized and stowed for travel, after which the inside needs some deeper cleaning.  After that it’s continuing to catch up on blog posts and working on drafts of articles for Bus Conversion Magazine.

When we got back and had the groceries stored Linda started a load of laundry and began gathering up her stuff for the flight home tomorrow while I worked on programming our new TireTraker TT-400C monitor and re-installing all of the sensors on the tires.  Our original monitor had a charging problem and Daryl Lawrence mailed a replacement to us along with a charging cable.  It arrived on Friday and Butch picked it up at the Post Office and gave it to me on Saturday morning.  I tried all of the possible combinations and verified that the original charging cable was fine but the original monitor was not.  We will return the old monitor and cable to Daryl and Cheri at Escapade in a few weeks.  The driver side front tire was giving a low pressure alarm so I checked the pressure with my digital gauge.  It was 97 PSI (it is supposed to be 115 PSI).

The Dewalt air-compressor was already out of the car and secured to the fence along the north property line so I plugged it in, got the air hose out, and filled the tire back up to 115 PSI.  I was going to check/fill all of the driver side tires, since they were in the shade, but I really needed to do that in the morning when the temperature was near its overnight low and before the sun stared to warm up the passenger side of the bus.  I may do this Wednesday, just to get them close to right, and will do it again on Monday, March 2nd so we are ready to leave on the 3rd without too much to do other than pull out and hook up.

When I was done with the TPMS we trimmed our two cats’ claws, which were overdue.  This has been a “mañana” task for a while but finally became a “hoy” task when we ran out of days.

I called Buck Bolding to see if I could stop by his place tomorrow on the way back from dropping Linda at the Phoenix airport.  Buck and his wife, Pat, were at the Eagles International Rally last month in Quartzsite with their gorgeous Eagle Bus Conversion and we discussed having me photograph it for a Bus Conversion Magazine featured bus article.  Buck remembered the conversation but unfortunately this was not a good week for him for this project.  He and Pat hope to make it back to Quartzsite yet this month.  If so, they will probably stay at the Quail Run RV Park just north of us on Central Avenue (AZ-95) which would be very convenient for me.

Linda and I sat on the north-facing porch of Joe and Connie’s park model trailer to escape the sun and enjoy the light breeze that was blowing.  Barb stopped by for a while and then retired to her motorhome.  Fonda came over to show us the small opal she spent part of the day grinding and polishing.  She went back to her bus and Butch cane over followed by Larry and Sandy.  We discussed and compared the WPA fireworks display they saw on Friday to the one we saw last night.  They returned to their motorhome and Linda went over to talk to Fonda leaving Butch and me to sit on the porch and solve all of the world’s problems.  While we were doing that Linda and Fonda decided we should all go out to dinner at Crazy Jerry’s.

We had our usual 12″ pizza–thin crust, no cheese, with mushrooms and onions–and a side order of French fries.  Our waitress was Michele and we had a nice chat with her about the restaurant and the town of Quartzsite.  She and her husband own both the Main Street Eatery and Crazy Jerry’s.

When we got back to our coach Linda finished gathering up her stuff.  All she has to pack in the morning are her computer, power supply/charger, and iPad.  We were in bed by 10 PM and set the wake-up alarms for 6 AM.

2015/02/17 (T) Fly Away

We were awake before 6 AM but stayed in bed waiting for the wake-up alarms to go off.  Linda set one on her iPad or phone, I’m not sure which one, but it did not go off.  I set the alarm on the panel mounted click by my side of the bed and it did go off.  Linda prepared herself for traveling and packed up her iPad, computer, charging cables, and other electronic paraphernalia without which modern life would be unbearable at best and impossible at worst.  I did not make coffee and we did not have breakfast as the Phoenix Airport was a two hour drive with limited rest stops.

We had targeted a 7 AM departure but by 6:40 AM we were ready to go.  Linda’s “suitcase” was a zip top nylon bag that I got at a conference some years ago.  Everything she had with her, except her down coat, fit in that bag or in her computer bag.  We pulled out at 6:45 AM, made our way through town to Exit 17, and got on I-10 going east.

We made good time as the speed limit on I-10 away from major cities is 75 MPH, allowing me to travel comfortably at 68 MPH.  We got to watch night give way to dawn give way to the sunrise and then daylight.  Once the sun was up driving was more difficult until it rose high enough in the sky that our sun visors could do their job.  Traffic was light heading eastbound but there was a steady stream of trucks headed west.  We made good time, even as we entered the Phoenix metropolitan area, until we were about 12 miles from the airport where traffic came to a standstill across all six lanes.  The GPS indicated heavy traffic ahead and one hour to reach our destination.

We had planned to drop Linda at the terminal at 9 AM, two hours before her scheduled departure, so a one hour delay would be cutting it too close.  Linda grabbed the atlas (so glad we brought it along) while I moved to the right hand lane.  There were major surface streets paralleling I-10 to the south so I exited the Interstate, drove down to the first one, and turned left to continue our eastward travel.  It moved a long reasonably well and eventually put us on I-17 southbound, which almost immediately curved eastbound.  About five miles later we intersected I-10, headed north, and took the airport exit 1/2 mile later.  From that point we just followed the signs for Terminal 3 which is the one that Delta Airlines uses.

As we were driving through the airport I got a phone call.  I dug my phone out of its case and handed it to Linda.  She said it was identified as possible spam and declined the call.  She set my phone in the console between the front seats and we pulled up to the departure curb at Terminal 3.  She took off the light jacket she wore in the car, grabbed her two bags and her down coat, gave me a quick kiss, and trotted off into the terminal.  I pulled away and before I got to the turn-around to get back to I-10 reached for my phone only to discover it was not there.

A missing phone is a sickening feeling, on a par with a missing wallet.  I searched around as best I could while driving and could not locate it.  I thought that Linda might have inadvertently taken it with her.  If so, my hope was that she would discover the mistake when she went through security and head back to the curb to look for me, realizing that I would be looking for her.  I circled through the terminal road system for 20 minutes but she never appeared.  As inconvenient as it would have been for her to take it with her, she could have shipped it back to me overnight.  My worst fear was that it fell out on the ground at the airport, in which case the best (?) I could hope for was that someone ran over it and rendered it unusable.  I should have found one of the cell phone lots and done a more thorough search of the car, but if it wasn’t in the car there wasn’t anything I could do about short of finding a pay phone, and when/where was the last time/place you saw one of those?

I circled the terminal one last time and then followed the signs for I-10 west and headed for Quartzsite.  Phoenix has an extensive highway system, which always has its own complexity, but the traffic was ridiculous.  We avoided Phoenix on our way to Q, using I-8 and AZ-85 to bypass the “big city.”  We will be avoiding it again in a few weeks when we relocate to the Casa Grande area and then to Tucson.

I remembered seeing a QT (Quik Trip) filling station and convenience mart on the west edge of town when driving in this morning.  Their listed price for Regular gasoline was $2.099, cash or credit.  I could have made it back to Q on the fuel in tank but why risk running out, especially given the price?  I exited the Interstate, used the facilities, and bought a cup of coffee.  This QT had the fanciest coffee and tea self-serve area I have ever seen.  I topped off the tank with some inexpensive gasoline, cleaned the windshield, and continued on my way.  I also found my phone, which had not been placed in the center console like I thought, but just in front of it, allowing it to slip down in front of my seat where I could not see it while driving.  Whew.  I suddenly felt a lot better.

With the delay getting to the airport, the added time driving around the airport, and the stop for fuel I got back to our motorcoach around noon instead of 11 AM.  Butch and Fonda were outside contemplating what appeared to be all of their worldly possessions which were arrayed on and around their patio.  Butch was studying his new VDO electronic speedometer, a 437-152 just like mine.  All of the printed directions referred to using a 12VDC power source but the instrument case said “12/24V”.  Chuck Spera and I have both installed this exact same model gauge in our Prevost H3-40s and my recollection was that we had them wired to 24VDC ignition switched sources.

Butch put in a call to VDO technical support (Continental) and I called Chuck.  He did not recall even checking the voltage and just used whatever was there.  I was almost certain that I had checked the voltage and it was 24VDC, which is why I wired the two 12V light bulbs in series.  Butch got a call back from VDO verifying that the gauge would work on either voltage while I had a long chat with Chuck in which he brought me up-to-date on their winter at Pelican Lake Luxury Motorcoach Resort in Naples, Florida.

Chuck mentioned that Prevost Community is having a “non-rally” rally April 17-20 at the Bella Terra Luxury Motorcoach Resort near Gulf Shores, Alabama.  There is no rally fee and they negotiated a special group rate of $35/night.  That may be a bit late in April for us to be that far south, but maybe not.  We would like to be home by May 1st and we would like to visit family in St. Louis on the way.  I-55 starts at I-10 just northwest of New Orleans and Bella Terra is an easy day’s drive from there.  Chuck said there is an Indian Casino on Lake Charles that has an excellent RV park for $13 per night that might be a good stopping spot for just before/after the rally.  He also mentioned that there is a thread on the POG forum about bus barns.

I made a nice, large salad for dinner, had a small glass of wine, and turned in early.  I plan to start on cleaning and waxing the passenger side of the coach in the morning.

2015/02/18 (W) Wax On, Wax Off (Continued)

Today was my first full day without Linda here.  This how it went.

I set my alarm and got up at 6 AM.  I made coffee and had the raspberry pastry bites for breakfast.  Yeah, they’re vegan, but definitely not WFPB.  I got the trash and plastic bottles ready to take out and then worked on yesterday’s blog post.  It was still dark out so I spent a little time straightening up the inside of the coach.

Once it was daylight I started cleaning and waxing the passenger side of the coach.  I wiped the windshields off (again) and then did the side from the front corner back to the patio awning front support arm.  I worked from 8:30 to 10:30 AM which was a bit too long as the sun was very bright and the body panels were getting quite warm causing the wax to dry too quickly.

I put away my supplies and gathered up my microfiber towels.  I had enough clothing and towels to do a load of laundry and added the microfibers to the batch.  This was the first time I have used the laundry room since we arrived so Barb showed me how to set washer controls.

Whenever I was not doing something else I worked at my computer.  Other than a few e-mails my focus was BCM articles.  In particular I am trying to finish an article on “Quartzsite 2015.”  The article was basically written a couple of weeks ago, but we have done other things since then so I want to expand it a bit.  What I mostly spent the day and evening working on were the photos.

I got the trash and plastic bottles ready and took them to their respective containers.  I let Barb know that I needed to use the car port sometime in the next 10 days.  I want to wash and wax the car and will need to get it in the shade.  When I was done with the laundry I finally ate the grapefruit I got out for breakfast.  I was still hungry so I also had a sandwich for lunch.

I checked the total hardness of the water coming out of the water softener and it was still somewhere between 3 and 7 grains per gallon, indicating that more regeneration was still needed.  First I switched the hoses around and gently back-flushed the unit using filtered water.  I switched it back to the regular configuration and added a 26 ounce container of non-iodized table salt.  I ran the water through the unit until it was noticeably salty and then shut it off and let it sit for 20 minutes.  I repeated this, letting about 10 gallons of water go through the softener each time.  Late afternoon I removed the housing, rinsed out the little bit of remaining salt, reinstalled the housing, and gently ran about 15 gallons of filtered water through the unit to get the residual salinity out if it.  It was dark by then so testing the TH will be a task for tomorrow.

I had several text messages and calls from Linda throughout the day.  One was a photo indicating evidence of mice in the pantry.  Oh joy.  We were gone all last winter, which was bitter cold and snowy, and did not have a problem so we do not know what is different this year.  Linda though that perhaps all of the construction work (landscaping and natural gas) had disturbed the local mice.  Whatever the cause there wasn’t anything I could do about it from 2,200 miles away so I made a nice green salad for dinner and then continued working on photos for my article.

 

2015/02/13 (F) Liar Peg Leg Smith

We finally fell back asleep last night and woke up around 7:30 AM.  The price of the motel room included breakfast.  The only things they had that we could eat were bagels, English muffins, orange juice, and coffee, but that was enough.

FMCA Freethinkers gathered at Steve & Liz Willey's RV.  Peg Leg Monument, Borrego Springs, CA.

FMCA Freethinkers gathered at Steve & Liz Willey’s RV. Peg Leg Monument, Borrego Springs, CA.

When planning our 2-day trip we thought about driving down the east side of the Salton Sea and stopping at The Slabs, Salvation Mountain, and East Jesus on our way to our Freethinker gathering at Peg Leg.  From our motel in Indio that would have turned a one hour trip into a three hour trip.  After a less than restful night and a late, slow, start to the day that did not appeal to us.  We took CA-86 down the west side of the Salton Sea and then headed west on the Borrego Salton Sea Way (S-22) towards Borrego Springs.

The sign says it all.

The sign says it all.

A few miles before reaching Borrego Springs we reached the 90 degree bend in the road where Henderson Canyon Road splits off to the north.  A short way up Henderson Canyon Road was the entrance to a clear dirt area full of RVs.  We had finally reached the Peg Leg Boondocking area.  I recognized the pile of rocks from pictures and then spotted Steve and Liz Willey’s motorhome.  It had several other motorhomes parked near it and we figured that was our FMCA Freethinkers group.  When we pulled up in the car the group was assembled under the shade of the Willey’s patio awning.  There was one couple there that we met for the first time just a couple of weeks ago in Quartzsite.  We introduced ourselves to everyone, unloaded our chairs, and joined the group.

The Peg Leg Smith monument and State Historical Marker.

The Peg Leg Smith monument and State Historical Marker.

We sat in the shade of the patio awning, protected from the intense rays of the sun, with a view of the mountains and a cool, refreshing breeze.  We got out some snacks and others did the same, creating a community snack buffet in the process.  We talked (and snacked) for five hours.  We had not yet seen Borrego Springs or the giant metal sculptures in the desert so around 3 PM we made plans to meet up with the group at 4:15 PM for dinner at Assaggio’s.  Liz gave us a guide to Borrego Springs that included a map showing the locations of all of the sculptures.  We packed up our chairs and our food and headed out Henderson Canyon Road towards Galleta Meadows at the north end of town.  On our way to the Meadows we came across a self-serve fruit stand and bought a 10 pound bag of freshly picked grapefruit for $3.

The self serve fruit stand on the north end of Borrego Springs, CA.

The self serve fruit stand on the north end of Borrego Springs, CA.

Fresh picked oranges and grapefruits, $3 per bag.  (They were delicious.)

Fresh picked oranges and grapefruits, $3 per bag. (They were delicious.)

Galleta Meadows was the vision of Dennis Avery and the sculptures have all been done by Temecula, California sculptor Ricardo Breceda.  Most of them are on the north end of Borrego Springs Road and those are the ones we saw.  We drove around the downtown area, which was small but quaint and attractive, and then headed back east on Palm Canyon Drive towards the airport where Assaggio’s restaurant was located.

Galletta Meadows in Borrego Springs, CA.

Galleta Meadows in Borrego Springs, CA.

Most of the sculptures are of animals.

Most of the sculptures are of animals.

We were on time but most of the rest of the group was already there and seated.  Assaggio’s is an Italian restaurant owned and operated by folks of Chinese descent.  They had a small menu of Chinese selections but everyone stuck with the Italian menu.  Linda and I had garden salads with vinegar and oil dressing and the vegetable linguini.  Italian is usually a safe restaurant choice for us in terms of getting something vegan to eat, but we have been surprised several times by how badly prepared our food has been.  Assaggio’s wasn’t the worst Italian food we have ever had, but it was not very good.  As with Quartzsite and other places we have ventured (or will) the experience of Borrego Springs and Peg Leg were not about dining out; it was about being in this place with these people.

This dinosaur was obviously happy to be in Galleta Meadows.

This dinosaur was obviously happy to be in Galleta Meadows.

Most of the sculptures are placed in natural settings.

Most of the sculptures are placed in natural settings.

By the time we were done eating and talking it was almost 6 PM PST and the sun had already dropped behind the very high mountains to the west.  There was still some lingering daylight, but we knew it would fade long before we made it back to CA-86.  Linda entered the address of our camp back in Quartzsite and we set off for our winter home two hours and 45 minutes away.

A tribute to the iconic vehicle of the west.

A tribute to the iconic vehicle of the west.

Because CA-86 runs in a NW-SE direction, the GPS took us through Mecca, California and onto Box Canyon Road.  Box Canyon Road ran through the Mecca Hills Wilderness and we did not encounter another vehicle along its entire length.  The road intersected I-10 at Cottonwood Springs Road where we entered Joshua Tree NP early yesterday morning.  We lost an hour crossing into Arizona and changing from PST to MST.  We pulled into our parking spot at 9:45 PM with just under 500 miles on our trip odometer.  It had been long couple of days but we had many new experiences and a lot of fun.

This serpent is over 60 feet long and spans a road.

This serpent is over 60 feet long and spans a road (between the second and third hump).

The sculptures are all metal and some of the details are very intricate.

The sculptures are all metal and some of the details are very intricate.

 

2015/02/12 (R) Joshua Tree National Park

Note:  Most of the images from our visit to JTNP are in a separate Gallery Post with the same date.

We set an alarm for 6 AM (MST) and got up shortly thereafter.  We had a few fresh strawberries for breakfast, gathered up the things we needed to take with us, and hit the road at 7:15 AM MST.  We stopped at Albertson’s supermarket in Blythe, California for a few grocery items and a small bag of ice for the ice chest we borrowed from Butch and Fonda.

South/Cottonwood entrance to Joshua Tree National Park in California.

South/Cottonwood entrance to Joshua Tree National Park in California.

By 8 AM PST (9 AM MST) we had exited I-10 and were headed into the Cottonwood entrance to Joshua Tree National Park (JTNP).  The visitor center did not open until 9 AM, but one of the volunteers suggested we drive down past the Cottonwood Campground to Cottonwood Springs.  There is a grove of very large palm trees there due to an underground source of water that has seeped out of rocks for centuries.  We hiked a short way up a much longer trail then hiked back to the car.   The morning sun was still low enough in the sky to make a nice light for photographs.  We returned to the visitor center, which was now open, and stamped our National Parks Passport.

Bruce in the Cholla Garden, JTNP, CA.

Bruce in the Cholla Garden, JTNP, CA.

We drove through the park towards the north entrance stopping along the way to read Point Of Interest signs and go on short hikes.  The Cholla Cactus Garden was particularly interesting.  The southern/eastern part of the Park is Colorado Desert (a portion of the Sonoran Desert).  The north entrance is accessed from Twenty Nine Palms, California.  We left the park, got fuel, and stopped at the visitor center to stamp our NP Passport.

We drove back into the park, backtracked slightly, and then headed for the NW entrance.  The NW part of the park is Mojave Desert; higher and dryer than the Colorado Desert.  We stopped and hiked the 1.3 mile Skull Rock Trail, which passed through the appropriately named Jumbo Rocks Campground.  We then took a short spur and drove up to Keys View.  From there we could see Indio and Palm Springs in the valley far below.  Mt. Jaucinto formed the backdrop for Palm Springs and behind that we could see the snow-capped peak of Mt. Gorgiano, the tallest mountain in Southern California at over 11,000 feet.  On the way back to the main road we saw a coyote.  It decided to cross the road just in front of our car, so we got a very good look at it.  Joshua Trees were everywhere in the northwest part of the Park as they favor the Mojave Desert climate.  We stopped and hiked the Barker dam trail, another 1.3 mile loop through strange but beautiful rock formations.

JTNP has lots of grand views of unusual rock formations, but there is also lots to see on a small scale.

JTNP has lots of grand views of unusual rock formations, but there is also lots to see on a small scale.

I took a lot of photographs during the day.  As we headed towards the northwest entrance it was getting late in the afternoon and we drove past roadside exhibits (information displays) and trail heads that we would have liked to hike.  We exited the park into the town of Joshua Tree and headed west in order to get to Palm Springs.  JTNP is high ground, especially the northwest part of the park where we were at 5,300 feet above sea level.  Palm Springs is in a valley that eventually leads down to the Salton Sea, whose surface is 247 feet below sea level, so we had quite a bit of altitude to lose.  CA-62 (29 Palms Hwy) heading west out of Joshua Tree goes through Yucca Valley and then drops in a straight line at a steep grade for miles passing through Little Morengo Heights and Morengo Valley and finally winding through Morengo Canyon before reaching the valley floor.

20150212-02385

The hiking trail at the Skull Rock area of JTNP had a few challenges.

 

We turned left onto N. Indian Canyon Road which took us southeast and then turned south past the west edge of Desert Hot Springs and straight down into the west edge of Palm Springs.  Our reason for coming here was food, specifically the Native Foods Cafe on E. Palm Canyon Drive.  Now a small chain of vegan restaurants, the one in Palm Springs was the first to open.  We both had the Reuben sandwich and split an order of cole slaw and sweet potato fries.  Vegan cupcakes for dessert put a nice exclamation point at the end of a very tasty meal.

After dinner we drove to Indio and checked-in to our motel.  It was nice to be able to take long, hot showers.  We tuned the TV to the Weather Channel and watched back-to-back-to-back episodes of Prospectors.  Our interest was a lot higher than it might have been because our friends, Butch and Fonda, have gotten interested in rocks and minerals.  The air-conditioner was noisy in a way that made it difficult to sleep yet turning it off made the room stuffy.  The alarm clock went off at 3 AM.  The radio was not tuned to a station and the volume was all the way up.  I was completely wide awake by the time I figured out what was going on and put an end to it.  For what we paid to stay there it was not a very satisfactory experience.  I would think that checking the alarm clock would be part of the housekeeping routine when turning a room but apparently not.

 

2015/02/07-11 (S-W) In and Around Q

2015/02/07 (S) Bouse, AZ

We got up around 8 AM, got cleaned up, and had coffee and granola.  Linda then cut my hair, which seems to be a once every 4 to 6 weeks thing when we are traveling.  Butch and Fonda went to Yuma to meet up with Bell, Bell’s daughter, and Bell’s three grand-daughters.  Bell’s daughter was in Yuma with her Roller Derby team and the family came along.  We wanted to get out and do some more sight-seeing and decided to drive to Bouse, Arizona.

Cholla "teddy bear" cacti at Quinn's Pass on the road to Bouse, AZ.

Cholla “teddy bear” cacti at Quinn’s Pass on the road to Bouse, AZ.

Bouse is a small town located in the next valley to the east of Quartzsite, which sits in the La Paz valley.  It is on AZ-72 at the eastern end of Plomosa Road.  The western end of Plomosa Road is at AZ-95 seven miles north of the city limit of Quartzsite.  The first three miles of Plomosa Road heading east from AZ-95 runs through the BLM Plomosa Road STVA.  The road is paved its entire length and provided a fun and scenic drive out to Bouse and back.  We stopped at Quinn Pass to read the historical marker and ended up going on a short hike.  We have wanted to do this little trip ever since friends told us about it, but today provided an added incentive to finally go; the Parker 425.

The Parker 425 is an annual off-road race in the desert east of Parker, south of the Buckskin Mountains, and north of Bouse.  The course is a little over 140 miles in length and the race consists of three loops for a total of 425 miles.  It begins and ends at the Bluewater Resort and Casino in Parker.  Last year’s winner completed the race in just over seven hours.  That’s an average speed of 60 MPH, and there are plenty of curves and bumpy areas where it is not possible to go that fast, so the vehicles are really moving every place they can.

When we got to AZ-72 we crossed the highway, drove three short blocks, and made a left on Swansea.  I could see from the GPS that it was a paved road that continued in a northeasterly direction.  I had looked at a map yesterday and had a general sense that one of the spectator areas was out that way.  We did not have to drive very far before we saw Jeeps and ATVs parked on top of a big hill all facing the same direction.  We drove past the turnoff for that area and just around the hill was a large parking area full of cars and RVs.  The dirt road was closed, the Fire Department was set up there, and there was a checkpoint for the race.  I found a place to park and we got out to check out the action.

We stayed long enough to see a dozen different vehicles pass through the checkpoint and I shot photos from several different vantage points.  There are different classes of vehicles, but the ones we saw were of two types: highly modified small pickup trucks, and custom built off-road racers known as “grasshoppers” because of their long shape and the suspensions allow them to “bounce” over bumps in the road.

View looking NW from the Quinn's Pass area between Quartzsite and Bouse, AZ.

View looking NW from the Quinn’s Pass area between Quartzsite and Bouse, AZ.

The air temperature was pleasant but the sun was very hot so we drove the short distance back to Bouse, stopped at AZ-72, and quickly scoped out the town.  We spotted the Coachman Restaurant just northwest of the intersection and drove over there to have lunch.  We each had a garden salad and iced tea, and I had French fries.  We can pretty much count on lettuce and potatoes in any restaurant we visit.

Bouse was founded in 1908 as a mining camp but as a waypoint between Phoenix and Parker it now survives on tourism, agriculture, and retirees.  Measuring 10.1 square miles at 947 feet ASL with 996 residents (2010 census) the area enjoys sunny skies year-round.  We saw RVs of all types throughout town and in the dessert along Plomosa Road which is all BLM land.  There were also quite a few RVs in the Bouse Community Park.

We drove back to Quartzsite the way we came, a distance of 30 miles, because the only other ways back were via Parker (64 miles) and Phoenix (at least 250 miles).  Linda wanted to walk through the Tyson Wells market area one more time as this is the last weekend for the Craft Show.  We bought a cute hand puppet that we think grand-daughter Madeline will find very interesting.  We drove over to Barry’s Breads to get a loaf of his Barry’s Basic Bread but he was not open.  In fact, it looked like he was done for the season.  Activity really has slowed down here and he is presumably getting ready to move to his next venue.

We stopped at the Road Runner Market and bought a loaf of French bread and some red grapes.  We then drove to the Quartzsite Cemetery to take photographs of Hadji Ali’s (Hi Jolly’s) gravesite, which is marked by a small pyramid with a silhouette of a camel on top.  As long as we were there we wandered around the rest of the cemetery, which was an interesting and well-kept place.

Once we were back at the coach Linda sat outside and read while I transferred photo files from my camera to my computer and backed them up to our NAS.  I then continued selecting and processing images from yesterday’s outing to KOFA NWR Palm Canyon.  I was starting to work on the images from today when Linda cane in and started making dinner.

She decided to make “Mustard Greens and Beans” using Great Northern beans.  In addition to the usual onion and garlic, it had vinegar, a little sugar, and honey mustard.  It was very tasty and we agreed it was a keeper.  She served sautéed green beans on the side, cut up some of the French bread, and poured a couple of glasses of Franzia Refreshing White wine.  Sliced fresh strawberries and cookies for desert completed the meal.

Butch and Fonda got back from Yuma while Linda was cooking.  I gave Butch a call after dinner to discuss our TireTraker systems.  He needs to charge their monitor this evening and I asked him to check on the behavior of the LEDS on the 12/24VDC plug.

As we do most evenings, Linda read and played online word games while I worked on this post for a while and then resumed editing photos on my computer.  I checked e-mail again and had several regarding the upcoming Freethinkers gathering at the Liar Peg Leg Smith Monument boondocking area near Borrego Springs, California.  One of them posited the question of how often Friday the 13th occurs?  I did a quick online search and the answer appeared to be 1 to 3 times per year and every 12/7 or 1.714 times per year, on average.  That is 171.4 times per century or 1,714 times per millennium.  I posted that back to the e-mail reflector and went to bed.

Rocks and flora at Quinn's Pass, AZ.

Rocks and flora at Quinn’s Pass, AZ.

2015/02/08 (N) Another Meetup

I was up at 7:30 AM this morning and got the coffee made right away.  Linda did not sleep well last night but got up as soon as she smelled the coffee.  Breakfast was toast and preserves.  I was planning on putting in a long day at my computer and Linda was planning on doing laundry and some work for the bakery but our plans changed before we got started.  When I checked my e-mail I had one from Lou and Donna Rice of our FMCA Freethinkers Chapter indicating that they were at Mile Marker 2 on Plomosa Road.  We drove right past them twice yesterday on our visit to Bouse but had no idea they were there.

Plomosa Road is about seven miles north of Quartzsite on AZ-95.  We left at 10 AM and were parked next to their Jeep before 10:15.  We sat and talked for four hours before returning to our coach.  As soon as we got back I took our TireTraker monitor and charger over to Butch’s coach.  We tried our charger on his monitor and it worked fine.  We then tried his charger on our monitor and it did not work.  Between our four devices it was clearly our monitor that was defective.  I will have to call Darryl Lawrence tomorrow and see what we can figure out.

We each had a pear, some red grapes, and something to drink.  Linda gathered up laundry and I got to work editing consolidated blog posts.  In between loads she sat outside and read.

Fonda had two Poblano peppers she got at the Farmers Market on Wednesday and gave them to Linda.  Linda found a recipe for stuffed grilled poblanos.  The stuffing was white rice, scallions, black beans, tomatoes, vegan sour cream and cheddar cheese, and cumin.  It resembled Mexican rice but with a creamy/cheesy dimension.  She cooked the stuffed peppers on Butch and Fonda’s little grill and cooked the extra stuffing on our cooktop.  She served the dish with Clementine orange wedges and a glass of Franzia Refreshing White wine to make an outstanding meal.

After dinner we sat outside Butch and Fonda’s bus enjoying the cool desert night air and watching the lights of airplanes flying overhead.  It eventually cooled off enough that we returned to our coach where I continued to work on blog posts and Linda worked on the bakery accounting.  She eventually went off to bed and I uploaded survey items to the FMCA Education Committee folder in our Dropbox and sent an e-nail to the committee.  We have a committee work session tomorrow at 4 PM EST (2 PM MST).

Vehicles positioned east of Bouse, AZ to watch the Parker 435 off-road race.

Vehicles positioned east of Bouse, AZ to watch the Parker 435 off-road race.

2015/02/09 (M) A Bright Idea

Butch called around 8:20 AM to let me know that our light bulb order was at the Post Office awaiting pickup.  He and Fonda were headed to the Quartzsite Gem and Mineral Club for a day-long class on faceting, so he gave me the parcel slip so I could go pick up the package.

While we were eating breakfast it suddenly occurred to me that we should visit Frank Lloyd Wright’s Taliesin West while we are camped near Tucson next month.  Linda went to the website and discovered that it is in Scottsdale which is a northern Suburb of Phoenix and is closer to Quartzsite than it us to Tucson.  We selected a couple of possible dates and she went online to get tickets.  The “Behind the Scenes” tours are only done on Monday, Thursday, and Saturday.  She tried to get tickets for Monday February 16 but they only had one left.  She called but they would not sell us two tickets.  We waited way too long to think of this and painted ourselves into a corner so it may not happen on this trip to the southwest.

I drove to the Quartzsite Post Office after breakfast and retrieved the package, only my second trip to the Post Office to transact business since we arrived in Q.  The first trip was to sign up for the P. O. Box.  Linda usually takes care of the mail while she is out walking and Butch usually checks the P. O. Box, which is at a different location that is not quite as convenient a walk from our camp as the main building.  We have not used the P. O. Box very much, but it has been invaluable when we have.

I worked most of the day on some of my blog posts for December 2014.  I took a break around 12:30 for a bite of lunch and then called Daryl Lawrence and left a message regarding our TireTraker TT-400C monitor which appears to not be recharging.

The Parker 425 checkpoint east of Bouse, AZ.  This race is a BIG deal with fire, EMS, and helicopter coverage.

The Parker 425 checkpoint east of Bouse, AZ. This race is a BIG deal with fire, EMS, and helicopter coverage.

Gaye Young called around 1:30 PM to make sure I was going to participate in the FMCA Education Committee work session at 2 PM.  (Gaye is the chairperson of the committee.)  There were only two items on the agenda and I had to give the status report on both of them.  Our work sessions and meetings are conducted by telephone conference.  They usually last an hour and today was not an exception.  If committee members provide me with additional input this week regarding an education survey we are developing I will have some work to do the last two weeks of the month in addition to working on articles for Bus Conversion Magazine, completing some minor repairs on the bus, finishing the cleaning/waxing of the exterior of the bus, and cleaning/waxing the car.

I managed to upload consolidated blog posts, including some photographs, for December 5 – 8, 9 – 12, and 13 – 16, 2014.  I did not take very many photos while we were traveling but once we got settled in Q I got the camera out and started using it.

I got a call back from Jeff at TireTraker support.  I explained what the monitor was (not) doing and he agreed to mail me a new one along with a new charger.  We will return the defective one to Daryl at Escapade next month.

Linda cooked up a couple of Tofurkey brand vegan Italian sausages with sweet onions and sweet red bell peppers and served some broccoli as a side dish.  After dinner I removed my bulbs from the Bulbtown shipment and checked the quantities and prices against my spreadsheet.  I then took the remaining bulbs over to Butch.  He had ordered 10 #4003 bulbs to use in his bay fixtures and realized when he saw them that he should have ordered #4004s.  Both are 24VDC bulbs but the #4003s have a single contact base whereas #4004s have a double contact base.  I think my bay light fixtures may take #4003s.  I will check tomorrow and if so I will buy them instead of Butch.

We sat outside with the lights off enjoying a glass of wine while watching the long lingering sunset backlight the mountains to our west.  As the sunset faded we looked at the stars and watched aircraft lights moving east and west high over the desert.  It still cools off here after the sun sets but not as quickly, nor as dramatically, as it did just  a week ago.

I combined the blog posts for December 17 – 20, 2014.  I had selected and processed photos for this post earlier so it was ready to upload at 11 PM but I did not want to go through the process at that late hour.  I dealt with a couple of e-mails and then went to bed.  A short time later Jasper threw up a large quantity of food so I had to get up and deal with that.  It looked like it had some hair mixed in with it, but I don’t know if that was the root cause.

2015/02/10 (T) Deionized

We were planning on heading to the Peg Leg Monument boondocking area on Thursday, spending the night in Indio, California and visiting Joshua Tree National Park (JTNP) on Friday before driving home Friday evening.  Ken Harrison from the FMCA Freethinkers indicated that he and Linda would not make it to Peg Leg until Friday.  That prompted us to consider flipping our plans, doing JTNP on Thursday and Peg leg on Friday.  Either way we will stay in Indio as we already have reservations at a motel.

The Polaris RZR ("razer") was one of the most popular 4-wheel ATVs in and around Q.

The Polaris RZR (“razer”) was one of the most popular 4-wheel ATVs in and around Q.

We had another stay-at-home day relaxing while getting things done.  Linda was going to drive to Blythe for groceries, but decided to go on Sunday as we will be away from camp all of Thursday and Friday and much of Saturday.  She is going to see if the Farmers Market is still operating tomorrow morning.  If not she will stop by the Road Runner Market.

As has been our pattern recently Linda went for a long walk (5 miles) while I continued to work on blog posts.  We had a light lunch when she returned.  I then called Teeko’s Coffee and Tea in Howell, Michigan and ordered six pounds of roasted coffee beans to be shipped to us here in Q.  We are approaching the midpoint of our snowbird season and are almost out of the five pounds of coffee we started with.  Jeff is going to roast two pounds each of Ethiopian Yirgacheffe half-caff, Sweet Seattle Dreams half-calf, and Cafe Europe Blend half-caff.  He will let it out-gas for a couple of days and then vacuum seal it in one-pound portions and mail it to us in a USPS flat rate box that will go to our P. O. Box in Q.  That should be enough to get us home even if we do not get there until late April.

Butch is always looking out for us and trying to help us spend our retirement dollars so he sent me a link to a portable two-tank water de-ionizing system that is available from RVupgrades.com.  The system is intended for washing/finishing cars and RVs as de-ionized water has had all of the dissolved minerals removed and does not leave spots on surfaces when it dries.  It is not, however, considered suitable for drinking.  The two tanks are plumbed in series and use special resin beds that have to be replaced when exhausted rather than recharged.  The first tank removes cations and the second removes anions, leaving the water completely deionized.  The cations are the positively charged ones typically “removed” by water “softeners”, such as calcium, iron, and magnesium, through ion exchange with sodium.  The anions are the negatively charged ones that water softeners typically do not remove, including fluoride and sodium.  The dual tank system is about 33% more expensive than a single tank portable water softener, but given the time, expense, and frustration I am experiencing trying to clean and wax our motorcoach I am seriously considering ordering one tomorrow.

I uploaded two consolidated blog posts yesterday and another one this afternoon.  I consolidated the posts for December 21 – 26, 2014, selected and processed the photos, and then took a break to sit outside and just enjoy the weather.  No book, no iPad, no computer; just ahhhh.  It was 78 degrees F with 19% relative humidity, a steady breeze from the northwest, and a hot sun shining through absolutely clear blue skies.  Linda and I agreed that it was the most perfect weather day we have had so far this winter.

Linda had some seitan ‘mock’ beef in the freezer that she heated in a saucepan and served with basmati rice accented with soy sauce.  Very simple but very tasty.  After dinner I uploaded the December 21 – 26 consolidated blog post along with 12 photos, entered all of the tags, and published it.

I got an e-mail yesterday from Cherie Ve Ard of Technomadia asking if we would be interested in previewing/testing another new website.  I said ‘yes’ and she responded with the URL for the development site.  When I was done with our website I went to the new one and created an account.  I got an activation e-mail, clicked the link, and was able to login.  I spent an hour looking around the site and captured my impressions and suggestions in an e-mail back to the development team.  I took a few minutes to investigate portable water deionizers but by then it was too late to get involved in any serious research so I went to bed.

2015/02/11 (W) Update This!

Hi Jolly's (Hadji Ali's) gravesite in the Quartzsite Cemetary; allegedly the most visited place in Q.

Hi Jolly’s (Hadji Ali’s) gravesite in the Quartzsite Cemetary; allegedly the most visited place in Q.

Linda’s cell phone rang just before 8 AM.  It was Barb.  She and Jim were up, dressed, and had the golf cart out and ready to go to the Farmers Market.  When we mentioned it yesterday Barb said she wanted to go and Linda indicated that it was open from 8 AM to noon.  Somehow that got translated into leaving at 8 AM to go to the market.  Linda, being a good sport, got up, got dressed and walked over about 8:15 and said she was ready to go.  No breakfast, no coffee, just the “git er done” spirit of the old west.  I stayed behind and got the coffee ready to brew when she returned.  I then got to work on computer stuff in the true “git er done” spirit of the new/virtual west.

They returned from the Farmers Market around 9:30 AM.  Linda bought another Romanesco brocciflower, some Brussels sprouts, grapefruit, and oranges.  To our delight Barry’s Breads was also there and had a few loaves of Barry’s Basic Bread.  He told Linda he will be around, at least at the Wednesday Farmers Market, through the end of this month.

As much as I would like to have de-ionized water available for rinsing the coach as I wash it, I decided not to speed hundreds of dollars without first doing deeper research into the available technologies and their life cycle costs.  I had enough other stuff to do today that I did not want to make time to dig into this new topic.

Linda saw a photographers vest at the Salvation Army resale store the other day but did not buy it as it was $15, pricey for the SA, and she wasn’t sure it would fit me.  We drove over to the store to see if it was still there.  It was, and it was too small for me.  It also had a defective zipper.  For a moment I thought we were going to have to buy it so I could take it home and cut it off.  I managed instead to pull it off over my head like a t-shirt and Linda was then able to get the zipper undone and put it back on the rack.  This was my first time in the store so while we were there I found two pairs of shorts for $2 each, a third pair for $0.50, and a lightweight, lined, waist-length London Fog jacket for $0.25.  Linda found a white hand-held mixer with two beaters for $4.  Deal.

When we got back Linda called the Prince of Tucson RV Park and made a reservation for the evening of Thursday, March 5th.  Lou and Val Petkus will already be there and this will allow us to caravan into the SKP Escapade at the Pima County Fairgrounds first thing Friday morning.   By coming in together we will be able to park together which will make our staff photography work more convenient.

My computer indicated that it had a large number of updates to install; 34, to be exact.  It was a 334 MB download so I turned on our Verizon Mi-Fi and switched my computer over to it.  The Mi-Fi is much faster than the Wi-Fi and I find that with large downloads the faster I get them done the more likely they are to complete successfully.  When those were done downloading and installing I had to restart my computer to finish the installation.  I also had an updated driver available for the NVIDIA GeForce graphics processor, so I downloaded and installed that.

 

I figured that if I had updates for my computer Linda would have them for hers.  I switched her computer over to our Mi-Fi and checked for updates.  She had 20 recommended and 4 optional.  I selected all 24 and the download was 980 MB.  That’s a lot of updates so I started it and let it run.  As always, finishing the installation required the computer to be rebooted.  When it restarted her computer the screen was once again functioning normally.  Go figure.  She also had an Adobe Creative Cloud update so I started that.  It failed at the 29% point so closed it and restarted it.  The second time it ran to completion.

Linda needed to work at her computer so we both sat at the dinette table and did our respective computer things.  She brought our financial records up-to-date in Quicken and I compiled and then uploaded a consolidated blog post for the last six days of December 2014.  I had e-mails going back and forth with some of our fellow FMCA Freethinkers regarding the Peg Leg gathering and ended up joining the Freedom From Religion Foundation.  I’ve meant to do that for a while and the electrons finally aligned just right this afternoon.

Hi Jolly's pyramid gravesite marker is a State Historical Site.

Hi Jolly’s pyramid gravesite marker is a State Historical Site.

Somewhere during the course of the afternoon we had sandwiches for lunch and snacked on dried fruits and nuts.  Kathi Slater called to check on Linda’s travel arrangements, after which I made popcorn.  Linda borrowed a small cooler from Butch and Fonda for our 2-day trip to California and back.  Fonda came over to go through the chores involved in caring for the cats while we are away and Linda gave her a set of keys to the bus.

I had seen a quick notification from the RV Internet Resource Center (Mobile Internet Aficionados membership website) that WiFiRanger had finally released their new firmware upgrade for the WiFiRanger Mobile.  Using my iPad as the control panel I switched our WFR-MT from the Wi-Fi/DSL connection to our Verizon Mi-Fi.  Again, I wanted to make sure this upgrade got downloaded as quickly as possible through the most reliable connection we have.  The download was reasonably quick but the installation took quite a while.  My iPad eventually lost contact with the WFR-MT and I just left it to finish and went over to visit with Butch and Fonda and Linda.  We came back to our coach when their dinner was ready and the WFR-MT firmware upgrade had finished installing successfully.  I switched the connection back to the Wi-Fi/DSL that we get to use as part of our “rent” while we are here.  I switched our laptops back to our internal Wi-Fi network and then shut the Verizon Mi-Fi off to let it recharge.

Neither of us was very hungry after snacking late this afternoon so Linda sliced the remaining tofu and pan-seared it.  She caramelized onions, added BBQ sauce, and served it open faced over the tofu.  After dinner Linda made a list of things we needed to take tomorrow while I made a final check of e-mail.  I e-mailed Lou Petkus to let him know that we were booked into the Prince of Tucson RV Park for March 5th.  I sent a message to Curtis Coleman via RVillage to accept his invitation to boondock in his driveway and see if March 3 and 4 would work for him.  He phoned back to confirm that it would be OK and then sent his address via TXT message.  I also had an e-mail from Kate de Fuccio and replied to that.  I checked for updates and my computer had several more to install so I started that process.  I checked Linda’s computer but she did not have any updates pending.  Although we got a lot of other things done today it felt like I had mostly dealt with computer updates.  Update days are often like that and you cannot schedule them because you never know when Microsoft is going to drop a big ‘update bomb’ in your lap.

Linda went to bed around her usual time.  I turned in shortly thereafter and much earlier than I have been.  We plan to get up at 6 AM tomorrow, have a light breakfast, finish packing for our trip, and be on the road at 7 AM.  We will stop at Albertson’s in Blythe, California for some water, ice, and other snack items to get us through the day to dinner at Native Foods in Palm Springs and give us something to eat on Friday while we are at the Peg Leg gathering.  Albertson’s opens at 6 AM PST, which corresponds to our 7 AM MST departure time.  We should arrive at the south entrance to Joshua Tree National Park around 7:30 AM PST which will give us a good, long day to explore the park.

 

2015/02/06 (F) KOFA NWR Palm Canyon

 

Palm Canyon Road entrance to KOFA NWR.

Palm Canyon Road entrance to KOFA NWR.

I slept in until 8 AM, got up, put on my sweats, and made a pot of coffee.  While that was brewing I turned the TT-400C TPMS monitor on and then adjusted the pressures in the four car tires and checked the passenger side steer tire on the bus.  Based on the temperatures it was reporting the monitor appeared to not be picking up the six rear tires on the bus so I plugged the PressurePro repeater in.  It is mounted in the passenger side rear corner bedroom cabinet and Darryl Lawrence said it should work fine with the TT-400C monitor.  Consumer TPM Systems all operate on the same frequency of 433.92 MHz and the repeater just receives, amplifies, and retransmits signals on that frequency.  The sensors have a unique digital identity and send out an encoded digital signal; that’s how the receiver/monitors know which signals to display and ignore the rest.

Linda in the parking lot at the mouth of Palm Canyon, KOFA NWR, AZ.

Linda in the parking lot at the mouth of Palm Canyon, KOFA NWR, AZ.

The north wall of Palm Canyon, KOFA NWR, AZ.

The north wall of Palm Canyon, KOFA NWR, AZ.

 

 

After a breakfast of juice and cinnamon raisin oatmeal Linda went for a walk while the air temperature was still cool.  I stayed at the coach and dumped the holding tanks, made up our mixture of a bottle of PineSol with an equal amount of water and a cup of Calgon bath beads.  Shake until dissolved and add ~60% to the black tank (via the toilet) and the other 40% to the gray tank via the bathroom and kitchen sinks, including the In-Sink-Erator.

 

 

 

 

The beginnng of the Palm Canyon trail, KOFA NWR, AZ.

The beginnng of the Palm Canyon trail, KOFA NWR, AZ.

 

 

With my chores done I recorded the dump in our notebook and then added the information to our Water Usage spreadsheet.  According to the spreadsheet and our notebook it had been 19 days since we last emptied the waste tanks.  I knew that wasn’t possible as we normally dump every 9 to 10 days when we are in normal water usage mode, and Marilyn was here for the first half of that interval.  Clearly we had forgotten to record a dump 9 or 10 days ago.

 

 

The north wall farther into Palm Canyon, KOFA NWR, AZ.

The north wall farther into Palm Canyon, KOFA NWR, AZ.

 

 

 

I finished working on some additional draft items for the survey the FMCA National Education Committee wants to send out.  I sent them to the committee chair (Gaye) and the member whose items I was revising.  We have another phone meeting on Monday and I wanted to get these items out to the committee by tomorrow so the members have time to look at them.

 

 

 

 

 

 

 

I got an e-mail from Gary at BCM last night advising the editor that I was doing an article on Quartzsite for the February 2015 issue and would have it done by the end of next week.  I e-mailed him back last night and then wrote it this morning and e-mailed it to him and Mike, the editor, for review.  Although I am no longer employed, I sometimes still work better against a deadline.

Deeper into Palm Canyon approaching the 1/2 mile mark.  KOFA NWR, AZ.

Deeper into Palm Canyon approaching the 1/2 mile mark. KOFA NWR, AZ.

After cleaning and waxing the bus and spending a lot of time sitting in front of our computers we wanted to get away from camp and do some sight-seeing.  The repair we had done yesterday to the passenger side rear tire on our car seemed to be holding so at 2PM we headed for the King OF Arizona (KOFA) National Wildlife Refuge (NWR) Palm Canyon area about 20 miles south of town.

A lone palm backlit high up on the south wall of Palm Canyon, KOFA NWR, AZ.

A lone palm backlit high up on the south wall of Palm Canyon, KOFA NWR, AZ.

This seemed like a good spot to stop and let Linda take my picture for a change.  Palm Canyon, KOFA NWR, AZ.

This seemed like a good spot to stop and let Linda take my picture for a change. Palm Canyon, KOFA NWR, AZ.

Palm Canyon is an enormous slot in the Kofa Mountains.  The canyon is aligned ENE to WSW opening to the WSW so we figured the best light would be in the mid-to-late afternoon.  To get there we drove south out of Quartzsite on US-95 about 19 miles to Palm Canyon Road and then east for seven miles on a good gravel roadway.  Good is relative, of course; it took as long to drive the 7 miles as it did the 19.  The trailhead is at the end of the road, which is the beginning of the canyon.  There are also several areas just off the parking/turnaround designated for tent camping, and it would be a spectacular place to pitch a tent.  The last mile or so of the road climbs more than you realize until you get to the parking area and are treated to a sweeping view of part of the La Paz Valley that stretches for over 100 miles from Parker on the north end to somewhere north of Yuma on the south end.

 

Looking WSW back out of Palm Canyon at the La Paz Valley.  The trail climbs it goes deeper into the canyon.  KOFA NWR, AZ.

Looking WSW back out of Palm Canyon at the La Paz Valley. The trail climbs it goes deeper into the canyon. KOFA NWR, AZ.

 

There they are!  The fan palms of Palm Canyon high up in a shaded crevice on the south wall of the canyon.  KOFA NWR, AZ.

There they are! The fan palms of Palm Canyon high up in a shaded crevice on the south wall of the canyon. KOFA NWR, AZ.

The trail is a 1/2 mile hike into the canyon near the floor but to the south of, and above, the central drainage wash.  The canyon is named for the California Fan Palm trees that grow there; the only naturally occurring Palm trees in Arizona.  There is lots of other vegetation in the canyon, however, and the palms are a bit elusive.  About a half mile in there is a small wooden sign with an arrow pointing up to the left at a 45 degree angle.  All the sign had on it was the word “PALMS.”  And there they were, way up in a narrow crevice.  Mind you, some of the trees in this main grove have trunks that are 20 inches in diameter, but the canyon is a big place and the trees are far away from where we were standing.  The only wildlife we saw up close were small lizards about 3″ long, 6″ with their tails.  We heard and then saw a bird soaring high above the southern edge of the canyon but could not tell what it was.

 

Delicate colors on the north wall of Palm Canyon in the late afternoon sun.  KOFA NWR, AZ.

Delicate colors on the north wall of Palm Canyon in the late afternoon sun. KOFA NWR, AZ.

 

The light was nice hiking in and got better and better as we hiked out.  The trail climbs quite a bit from the parking area, but not steeply in any one place.  We took our time and I took a lot of photographs.  By the time we got back in our car the sun had slipped behind the Dome Rock Mountain Range that defines the western edge of the La Paz Valley.  We had nice colors in every direction but without any clouds we did have a particularly photogenic sunset.  By the time we got back to US-95 it was approaching 6:20 PM and we needed our headlights even through the glow along the crest of the mountains continued almost all the way back to town.

Looking back into Palm Canyon as we hike out.  KOFA NWR, AZ.

Looking back into Palm Canyon as we hike out. KOFA NWR, AZ.

 

 

 

Linda made a green salad with fresh tomatoes and blueberries, dried fruit, and nuts and dressed it with Raspberry Walnut Vinaigrette.  She heated up a couple of tortillas and used them to make a quesadilla-like thing with Daiya (vegan) cheese, tomato slices, and jalapeño pepper slices.  We had a small glass of Franzia Refreshing White wine with dinner and had red grapes for desert.

 

 

Before we left for our hike I had unplugged the power supply from my ASUS notebook computer to let it cool off.  It seems to me that it runs hot.  I plugged it in when we got back and had a notification on the screen that the computer needed to be restarted to complete the installation of updates.

 

The only wildlife we saw up close in Palm Canyon.  KOFA NWR, AZ.

The only wildlife we saw up close in Palm Canyon. KOFA NWR, AZ.

 

The north wall at the entrance to Palm Canyon in the glow of sunset.  KOFA NWR, AZ.

The north wall at the entrance to Palm Canyon in the glow of sunset. KOFA NWR, AZ.

I decided to check my e-mail first and had a couple from Gary, so I called him after we finished dinner and we chatted for about an hour.  It sounds like the article I sent him this morning on Quartzsite 2015 won’t run until the March issue, so that will give me a little more time to select and process photos, experience more things here, and possibly extend the article a bit.  In the meantime Gary is going to have Stacy proofread all of the articles that are ready plus the one I just sent.

 

 

My ASUS laptop keyboard appears to be functioning correctly again so I was reluctant to restart my computer, but the message said it would restart in one day on its own anyway.  I guess there’s no time like the present to find out if the machine has a problem.  It finished whatever it was it needed to do, powered down, and restarted without a hitch.  I then copied all of the photos from our canyon hike to the computer and NAS and started looking at them.  I processed a few and then went to bed.

 

2015/02/01-05 (N-R) Another Month in Q

2015/02/01 (N) Hola February

Yesterday would have been an excellent day to continue cleaning and waxing the outside of the bus—cool and cloudy without a lot of breeze—but it was also an excellent day for the inside computer work that we both needed/wanted to do.  I downloaded the free version of the Simple:Press forum WordPress plug-in the day before yesterday and was going to make a priority of installing it today on the FMCA Freethinkers website I have been developing until the activation of the Jetpack Site Management feature caused the admin panel (app) to crash.  We have had a problem for a while with one member who was unable (or unwilling) to interact appropriately online via our e-mail reflector.  The reflector does not require a login and does not have any way to moderate discussions or block/remove posts, so our options as a chapter were very limited.  A WordPress-based forum would give us all of those features.

I had an e-mail reply from support@ipower.com indicating that the Wordfence plugin had caused the problem.  They needed the answer to the security question in order to authenticate my support request and fix the problem. Bob Pelc provided me with that information which I supplied back to ipower.com.  Later in the day I got an e-mail indicating that the problem was resolved and I was, in fact, able to log in without any problems.  The e-mail said the Wordfence plugin had caused the crash and that they disabled it, but after I logged in it was still activated.  I did not, however, take the time to check if it was functioning correctly.  I also did not install the Simple:Press forum at this time.

For breakfast Linda improvised a potato tofu scramble with nutritional yeast, garlic, and other seasonings.  It was a hearty and flavorful start to the day.  After breakfast I called Jim A. back to discuss the FMCA seminar listing categorization document we have been working on.

I settled in to work at my computer on the consolidated blog post for November 10-16 while Linda settled in to work on accounting for the bakery.  She is also approaching the time of year when she has to pull tax returns together.  She uses Turbo Tax and needs an updated version each year.  The products she needed were on sale through Amazon Prime.  She purchased and download them, which also placed them in her Amazon software library, and they installed and opened without a hitch.

I got an e-mail from Harvey Carter (AC8NO), president of the South Lyon Area Amateur Radio Club (SLAARC), asking me to update the officer listing on the club website.  I took care of that and also changed that contact form (Contact Us page) to e-mail him instead of former president Mike Sharpe (WX8H).

By 2:30 PM I was tired of sitting in front of my computer so I changed into my work clothes and spent an hour trying to clean and wax a couple of windows on the bus.  The passenger side, which faces south, was so hot I cloud not touch it for very long, so I worked on the north side in the shade.

Jim/Flo L. and Jim/Barb B. disassembled the Select Comfort air mattress we had put in the park model trailer and divided up the parts.  We were going to donate it to the Salvation Army but did not get it done fast enough.  Jim B. would like the pump and controllers but Butch and Fonda need them to replace the defective unit on the mattress in their guest bedroom.  Since that is where I sleep when I am there, it is in my best interest to give it to them.

We invited all of our neighbors to come over for happy hour at 4 PM.  Barb B. came over with a glass of wine at 4:20 PM, so I poured a glass for Linda and me.  Jim B. was taking a nap as were Butch and Fonda.  (Hey; retirement is hard work!).   Butch and Fonda eventually shook the cobwebs out and came over.  Jim and Flo L. arrived but busied themselves with dinner preparations.  They were joining Jim/Barb B. for a belated Christmas dinner.  Jim B. eventually awoke and Barb left to join the other three for dinner.  Fonda left just before 6 PM to go to church but returned a few minutes later.  Apparently the evening service had been cancelled because of the Super Bowl.  She and Butch visited as the sun set and eventually it got chilly enough that we all decided to go inside.

I e-mailed Chuck Spera and my long-time friend John (J. C.) Armbruster earlier in the day but had not gotten responses from either of them by bedtime.  During the evening I had e-mails going back and forth with Steve Willey regarding the upcoming informal FMCA Freethinker gathering at the Liar Peg Leg Smith Monument boondocking area in Borrego Springs, California.  I also e-mailed Jim Ellmore regarding the same event.

A typical sunset in Quartzsite, Arizona.

A typical sunset in Quartzsite, Arizona as seen from our campsite on the north end of town.

2015/02/02 (M) Market Day

The last 24 hours have brought into focus why we are here for the winter.  It will be sunny and 80 degrees F today.  Detroit got 16.7 inches of snow from the storm that hit over the weekend, with 12 inches in Ann Arbor and similar amounts in Dexter, Howell, and Brighton.  When we checked this morning it was 7 degrees at home and going up to a high of 14.  Yeah, we are not missing that.

Breakfast was the bland store-bought bulk granola we have had to eat since running out of Linda’s homemade granola some weeks ago.  I wish we could carry a five-month supply of her granola; it’s that good.  Right after breakfast Linda started putting together menu ideas and a shopping list while I reviewed the latest seminar listing from Jim A. and e-mailed it back to him.  He called later to discuss it briefly.  I started working on yet another consolidated blog post for 17-23 Nov 2014 and did that until I could not stand to sit any longer.  The antidote for was go outside and work on cleaning and waxing the rear cap of the bus.

Butch and Fonda left around 9 AM and drove to Parker to go shopping at Wal-Mart.  Back home they shop at the Wal-Mart in Logansport and are familiar with the items there.  Not long after they left Linda drove to Blythe, California to do our grocery shopping for the week.  Of the supermarkets available to us we prefer the Albertson’s in Blythe, followed by the Smart & Final Extra at the same intersection.

Butch and Fonda returned from shopping and so did Jim and Barb.  Butch asked if I had ordered the coil for the MAC solenoid air valve that controls the a-c shutters behind the front bumper.  I hadn’t, so I took a break from cleaning and waxing the outside of the bus and called MAC Valve to order a replacement coil for the 111B601BAAA solenoid valve.  (I still have the old valve but I do not think I have it with us in the bus.)

Jim L. stopped by with some very fresh grapefruit and we got to talking about automotive detailing.  He recommended Finesse from 3M for polishing paint without leaving marks.  He said it works so well that the paint looks “wet” when you are done.  Butch had also suggested that I look at the Cyclo 5 dual head orbiting buffer/polisher.  Apparently this machine can finish paint with no swirl marks.

The FMCA Freethinker website /WP-admin/ panel was back up and running.  I logged in and checked the plugins.  They were all there but they had ALL been deactivated.  Tech support at ipower.com had indicated that they were going to disable the Wordfence plugin.  I re-activated most of them, but not all, and specifically did not re-activate the Jetpack plugin.  It is a large, feature rich plugin and the only thing I use is the Carousel feature to manage native WordPress image galleries.  Unfortunately I need that feature and have not found another plugin that does what I need.

I worked for most of the evening on the consolidated blog post.  By the time I finished it was too late to start selecting and editing photos, so I will do that tomorrow if I have time.

2015/03/03 (T) Wax On, Wax Off

I knew there was something else I was supposed to do yesterday, but I could not remember what it was.  I sometimes put “tasks” on my calendar, but that does not help if do not check it.  I remembered this morning what it was; I needed to call Sunset Sportswear in South Lyon, Michigan and follow up on an e-mail I sent last Thursday regarding our order for personalized SLAARC jackets.  I made that call and Pam took our credit card information.  Barb handles sales but had not made it in yet due to the snow.  Sunset Sportswear was closed yesterday because of the storm so if I had remembered to call them it would have been for naught.  Things often work out like that.

I also got an e-mail from the Escapees RV Club regarding the upcoming Escapade rally.  It indicated we could extend our stay until Sunday noon.  I called Lou Petkus, the head staff photographer for the Escapade, to let him know.  The rally ends on Thursday with normal departure on Friday and staff departure on Saturday.  Lou is trying to arrange a photography field trip for Saturday so the fact that anyone can stay until Sunday should help with participation.  I called the SKP headquarters and booked the extra night.

I confirmed which RV Park Lou and Val will be in on March 5th and I think we will try to get in there as well.  That location will position us close to the rally venue and allow us to caravan in together and park together.  (We have to be in by 11AM on the 6th.)  That, in turn, should make our staff photography work more convenient.  We plan to hang out (dry camp) with RVillage founder Curtis Coleman for a couple of nights before this at his rental home near Casa Grande, which will put us a lot closer to Tucson than we are here in Quartzsite.

We had also mentioned to Lou and Val at Quartzfest that we were thinking of heading to Organ Pipe Cactus National Monument after the Escapade.  They had been discussing it and decided they would like to go there as well so we will probably caravan there with them.  After OPCNM we plan to head to Big Bend NP (BBNP) in Texas and Lou and Val would also like to go there.  That is a three day drive for us, and we may take six or seven days to get there depending on where we might stop and what there is to see long the way.  Whether we travel together or separate will be determined later.  Our friend, Mara, and another women from the WINs are also headed to BBNP sometime in March and we have tentatively agreed to meet up with them if we can work out the timing.

I checked my e-mail and had a reply from Jetpack tech support at WordPress.com. “Happiness Engineer” Jeremy said that Wordfence has been known to cause issues with the Jetpack plugin.  He acknowledged that Wordfence is a powerful and important plugin but can be very aggressive in protecting websites.  Given that Wordfence appears to have caused the crash of the FMCAA Freethinkers WordPress /WP-admin/ Jeremy said I probably did not need to reinstall the Jetpack plugin.  I filled out a support ticket yesterday for this issue on the Wordfence website as I have a premium (paid) membership.  They acknowledged the support ticket right away but an actual response will likely take longer.

I had all of these communications chores done by 11 AM and decided to continue cleaning and waxing the outside of the bus.  I started with the rear, as it was still in the shade, and finished the lower half.  It was tedious as that is the engine hatch and it has numerous horizontal indentations that run the full width.  These indentations are open on the inside top for airflow and have screens to keep things from getting in (like fingers).

Another view of the sunset from our campsite in Quartzsite, AZ.

Another view of the sunset from our campsite in Quartzsite, AZ.

I continued on around to the driver side of the bus which faces north.  The temperature this afternoon got up to 80 degrees F, and it was very hot in the sun, but it was pleasantly cool in the shade of the bus.  It was near perfect conditions for the work I was doing.  I worked most of the afternoon and did not quite get the back half of the bus cleaned and waxed.  A couple of bay doors and I will be past the half way point on that side.

I am going to try to work on this at least a few hours every day, otherwise it will never get done and this is an ideal place to work on it as long as I am not working in the sun.  The south facing passenger side is going to be more of a challenge and I will have to limit my work to the morning before the body panels heat up.

UPS showed up today with my coil for the MAC valve which turned out to be an entire new valve.  Rather than try to remove the solenoid coil I may just install the whole valve.  UPS also brought Fonda’s new sewing machine.  It only weighs 13 pounds.

Butch got back from a rock hunting field trip late in the afternoon and we stood around chatting as an amazing sunset developed around us.  As I have mentioned before, sunsets here are often 360 degree events and this one surrounded us with color before finally fading into another starry night.

Linda made a wonderful dish for dinner last night and we had it again this evening.  She pan-grilled polenta and served it on a bed of dark leafy greens topped with puttanesca sauce made from scratch.

After dinner I selected photographs for my November 17 – 23, 2014 blog post and processed them.  I uploaded the text to our WordPress site and then uploaded, captioned, and integrated each photo in turn.  I also had to enter all of the tags, which I figure out as I read through the post.  If there is one thing I would like to have at this point it is the ability to highlight key words and phrases in my Word document and have them automatically become tags when the text is uploaded.

By the time I published the post and went to bed to finish this one it was midnight.  At eight minutes after midnight MST I was one hour into my 63rd year as I was born on this date at 00:08 in the Central Time Zone, where eight minutes past midnight happened an hour ago.

2015/02/04 (W) 63 and Counting

I finished my blog post for yesterday late last night and e-mailed it to myself at eight minutes after midnight, the hour and minute of my birth, or so I have always been told.  Linda and the cats were all asleep and I observed the moment in quiet solitude.  As I noted at the end of yesterday’s post I was actually an hour late in my observance as we are currently in the Mountain Time Zone and I was born in the Central Time Zone.  But it was the thought that counted.

Sixty-three is not a milestone birthday anniversary, other than making it that far.  On my 60th birthday I became eligible to retire, and did so four months later.  On my 62nd birthday I became eligible to start drawing social security, but didn’t.  On my 65th birthday I will become eligible for Medicare.  The year I turn 66 Linda will apply for Social Security benefits and immediately suspend them.  I will be eligible for my full Social Security benefit but will not apply for it.  I will apply for the spousal benefit instead.  Our monthly Social Security benefits continue to increase by 8% per year until age 70, a solid and guaranteed return, so Linda will start taking her benefits then and I will file for, and take, my benefits when I turn 70.

Having thought through the complexities of birthdays, we had breakfast and then I got to work cleaning and waxing the outside of the bus.  My plan was to finish the driver side but not spend all day at it.  As it turned out, I spent most of the day at it, taking breaks to check e-mail.  It is just slow work, especially since so much of it has to be done on a step ladder.  I have no idea how many trips I made up and down that ladder, but it was a lot.  It is only a seven foot step ladder so I have to stand near the top to reach the top of the sides which are over 12 feet from the ground.  I cannot reach very far to the side either, so I work from one side of the ladder then climb down and climb up the other side and work from there.  I then climb down and move the ladder about three feet and do it all again; over, and over, and over.  But as Long as I keep going it eventually gets done.  I am, however, seriously considering getting a Cyclo 5 dual head orbiting buffer/polisher.  There is simply too much bus to do this by hand.  I am also considering getting a platform to put between two ladders and/or a four-wheel elevated work platform to use in the barn if/when we get it built.

I got a call from our daughter wishing me a happy birthday and had a nice chat with her.  I asked if Katie had made a final college selection but she is not done with interviews yet.  Perhaps we will know in a few weeks where she is headed in the fall.

Yesterday Linda invited all of our camping neighbors to come over today at 4 PM for happy hour to celebrate my birthday.  In preparation she spent part of the day making cupcakes with chocolate frosting.  When she wasn’t cooking she did accounting and tax return work for Butch and Fonda.  Around 3 PM she prepared bruschetta using what was left of a loaf of Barry’s Basic Bread and the puttanesca sauce she made a couple of nights ago.  Larry/Sandy, Jim/Barb, and Butch/Fonda all brought chairs and beverages of their choice.  Butch and Fonda brought chips, salsa, and hummus and the peanut and dried fruit mix they make.  We sat around talking until the sun set at which point the air temperature cooled off and we all retreated to our rigs.

I got a call from our son during our happy hour and excused myself for a few minutes to chat with him.  It was 7:40 PM back in Ann Arbor and Madeline was getting ready for bed.  I got to “chat” with her and she wished me a happy birthday.  With encouragement from her mom she asked me “How is Arizona?”  I told her it was very nice here.

We skipped lunch today and did not have dinner because we filled up on happy hour snacks.  Linda played online word games while I started assembling the consolidated blog post for November 24 – 30.  She turned on the MiFi and trundled off to bed to watch an episode of Downton Abby on her iPad.  I finished editing the post and selected two photos to go with it.  When I checked I found that I did not have photos for most of the days covered by the post.  I thought about uploading it but decided against it as it still takes time to upload the text, upload and insert the pictures, and create all of the tags and I was too tired to maintain the needed concentration.  Somewhere in there I read through a reply from Chuck Spera and sent him the next volley in our e-mail conversation.

Overall it was a good 63rd birthday.  Given our winter travel lifestyle I face the interesting prospect of celebrating my birthday somewhere different every year for many years to come.

Our fellow campers gathered by our bus for my 63rd birthday happy hour.  L-2-R: Sandy, Larry, Barb, Jim, Butch, Fonda, me.   Photo by Linda (not shown).

Our fellow campers gathered by our bus for my 63rd birthday happy hour. L-2-R: Sandy, Larry, Barb, Jim, Butch, Fonda, me. Photo by Linda (not shown).

2015/02/05 (R) A Screwy Tire

The overnight lows are now dropping into the upper 40’s at night and the coach cools off just enough that I turn the heat on in the front of the bus while I make coffee in the morning.  Soon enough the sun starts heating up the coach and we are pulling the accordion shades down to keep it out and opening windows and turning on ceiling exhaust fans to draw cool air in.  A couple of days ago we finally put the awnings out on the south facing passenger side of the coach.  Between the patio awning and the bedroom awning they shade more than half of the upper portion of the coach and help keep the interior temperatures in check.  We have not had them out much, however, because of the somewhat persistent winds in the La Paz Valley.

After breakfast I wanted to setup the TireTraker TT-400C TPMS.  Once I started I would need to install the sensors on all 13 tires.  In order to install the sensor on the spare tire in the car I had to empty out the back so I could get to the tire.  Linda was helping me and noticed a screw in the passenger side rear tire.  It was right at the edge of the tread but not technically in the side wall.  The tire was holding pressure but when I started to back the screw out it started to hiss so I screwed it back in.  Nuts.

Linda got online to look for tire repair shops in Quartzsite.  The first three numbers we tried were out of service and the Love’s Truck Stop only repaired big tires, not small ones, so I called Jim Liebherr to see if he knew of some place in town.  Flo answered the phone and could not locate Jim so I asked for a return phone call.  Butch then offered to drive me downtown where he thought he remembered seeing a tire shop.  As we were pulling out of our camp it occurred to Butch that the RV Pit Stop, just south of us on Central Avenue, might do tire repairs.  Before we even got that far we saw the sign for Best Auto and Tires.  We have walked or driven past this place dozens of times but never paid any attention to the fact they sold and serviced tires.  At the time we did not care.

They said they would have to see the tire so we drove back to camp and I drove back in the car.  They said they could repair it properly with an internal patch and they would get right on it if I wanted to wait for it.  $14.  Deal.  I could easily have walked back to camp from there but I was back with the car within an hour.  If the tire had not been repairable we would have had to take it off the car and use Butch’s Chevy Suburban to drive it to Yuma or Lake Havasu City where there are Discount Tire Locations.

Jim L. returned my earlier phone call while I was waiting for the tire.  He and Flo use a dentist in Los Algodones, Mexico and are very satisfied with the service and price.  I have a tooth that is bothering me just a bit and was giving some serious consideration to making an appointment with someone in Los Algodones.

I installed the batteries in our new TT-400C sensors and programmed the baseline pressures into the monitor (receiver).  I then installed the sensors on the bus and car tires, linking each one to the monitor as I went.  Programming the baseline pressures first is the easier way to install the system.  In setup mode the monitor displays each tire position in turn.  While the position is displayed a sensor is screwed onto the valve stem.  The application of pressure to the sensor “wakes it up.”  When the sensor starts transmitting the monitor associates it with the displayed tire position.  After exiting setup mode only the programmed tire positions display on the monitor.

In addition to the overall setup procedure there are several things I like better about the TT-400C system compared to the PressurePro system we have had since the 2008 FMCA national rally in St. Paul, Minnesota.  A major one is that the baseline pressures are programmed into the monitor.  On the PP-TPMS the baseline pressures are determined by the pressure in the tire at the time the sensor is put on.  Another thing I like is that the TT-TPMS monitor is powered by rechargeable batteries and is not plugged in when in use.  That makes it much more convenient to move it between the bus and the car, but especially to carry it around while installing and associating the sensors to wheel positions.  Finally, I like the sensors, which are much smaller and only weigh 0.4 ounces each.

Linda helped me reload the back of the Element and sort through all of the “stuff” that was “stuffed” in the glove box and the passenger side dashboard trays.  (When was the last time someone actually stored gloves in an automotive glove box?).  With everything sorted out and repackaged in ZipLock bags I stored it back in the glove box and locked up the car.

Linda spent part the morning working on accounting and tax returns for Butch and Fonda and talking on the phone to Dave, the controller at Metropolitan Baking.  I got a call later from Jim Ammenheiser and then did a final proofreading of our Education Committee recommendation to FMCA staff for how to restructure the categorization and listing of seminars and activities in the national rally programs.

We took a break and had the last two cupcakes from yesterday with some vegan Mocha Almond Fudge coconut “ice cream.”  We were supposed to have these last night for my birthday but we were not hungry after snacking at the happy hour birthday gathering.  Linda then went for a walk.  Linda got me a birthday card and a towel with an elastic edged hole for my head.  I tend to get food on my shirts when I eat and the towel is basically an adult bib that can be easily laundered.

Our fresh water tank was a bottle cap shy of empty so I filled it.  It usually takes about 50 minutes to fill the tank starting from empty so I set the timer on my smartphone for 40 minutes.  When it signaled me to check on the progress the tank was already overflowing.  (It has a vent tube on top of the tank that runs through the floor of the bay.)  I don’t think I wasted more than a few gallons of soft water so it should not throw my water usage and softening calculations off by much.  The good news was that the post-fill hardness test showed the water coming out of the softener at 0.0 to 0.5 gpg total hardness (0 to 10 ppm.)  That was better than the reading I got right after I recharged the softener, so perhaps it still had some residual salt in it initially.

At 4 PM I was getting ready to upload a blog post when the UPS truck showed up and dropped off two boxes for me.  It was the Chemical Guys microfiber products I had ordered recently, including two microfiber auto detailing aprons.  Butch returned a few minutes later with a small package for me.  It was the lens hood I had ordered for my Sony zoom lens and it had been mailed USPS.  He also had eight (8) Full River 6V L16 AGM batteries.  I helped him unload them from the Suburban onto the concrete pad on the driver side of their bus.  Fonda emptied out the driver’s side of their battery bay and she and I then moved the batteries to the bay where Butch positioned them.  He left them in their boxes and will install them when they get back to Twelve Mile.

At 5:15 PM I finally got around to uploading the consolidated blog post for the last week of November (2014).  I then started thinking about what to do with my December 2014 posts.  As of today I am still 67 posts behind and putting up daily posts is not realistic.  In looking through my photos I was surprised to find that I took very few from the time we left the house until we arrived in Quartzsite.  I decided to do consolidated posts for Dec 1 – 4 (Twelve Mike, IN to Alvarado, TX), 5 – 8 (visit with Donn Barnes), and 9 – 12 (travel from Alvarado to Quartzsite, AZ).  I have more pictures for the rest of the month, so I will have to figure out what makes sense.  I compiled the posts for December 1 – 4, selected and processed one photo, uploaded it, selected the categories, and entered all of the tags.  I posted it and then realized I wanted to edit the URLs slightly so I logged back in and found that I was unable to type anything.

It took me a while to figure out that the problem was the built-in keyboard on my ASUS G750JM ROG notebook computer.  I got it at the end of April last year, so I have only had it for eight months.  I decided to run a full scan using ESET Smart Security since I could do that with just a mouse and the Bluetooth mouse was working just fine.  It found 18 threats and dealt with 16 of them.  I then ran CCleaner, after which I enabled the onscreen keyboard.  Although intended for use on touchscreen computers, at least I could type things into a search box using my mouse.

I found some references to similar problems on answers.microsoft.com with the suggestion to examine the keyboard device properties.  If it indicated the device was installed and working correctly it was probably not a Windows 8.1 problem.  The other suggestion was to try an external keyboard.  If that worked it would confirm a keyboard hardware problem.  I had already gotten my Gigaware wireless keyboard out so I plugged in the USB dongle, turned on the keyboard, and voilà, I could type again!

Another post on the Windows forum listed website links for ASUS support so I started following those.  One ASUS website wanted the serial number of my computer, which I had to get off of a tag on the bottom of the case with really small type.  Once I had that entered correctly I was able to go to a download page with 81 files available, including bios and chipset code.  There were two files that seemed to have something to do with the keyboard.  By 1:15 AM I had a half dozen tabs open in two different browsers with no definitive understanding of what had happened or what to do to fix it.  I then realized that the Shift Lock key on the keyboard was illuminated and I could toggle it on and off.  I could also toggle the Number Lock, so I tried typing and the keyboard was working once again.  That, however, did not give me any confidence that it would continue to do so.  I decided I was not going to shut the computer down for fear of not being able to log back in on startup.  I was not about to start downloading and installing anything at that hour so I went to bed tired, annoyed, and, frankly, a bit discouraged by this unwelcomed turn of events.

 

2015/01/27-31 (T-S) Q 2015 W5

2015/01/27 (T) Ahhh, Mexico

We packed quite a bit into today.  After having toast and coffee for breakfast we drove to Yuma through heavy cloud cover and fog.  It made for an interesting and beautiful drive, but we did not pull off the road to take pictures.  There is often a tension between the need to get somewhere and the desire to stop and take photographs.  Today the destination took precedence.

When we got to Yuma we drove around looking for the Main Street that led to the heart of downtown and Yuma Territorial Prison.  This was only the second time we had been in Yuma and the first time I had driven here and I did not quite remember how the streets ran, which is unusual for me.  Yuma is not that big of a town and I was able to get oriented fairly easily with the help of the GPS map.  I missed a turn, however, and we ended up driving over the single lane bridge on the Ocean to Ocean Highway.  We stopped at a Casino just short of the California border, turned around, and went back over the bridge.  Being single lane the traffic is controlled by stop lights on each end.

Main cell block, 1875 Yuma Territorial Prison.  Yuma, AZ.

Main cell block, 1875 Yuma Territorial Prison. Yuma, AZ.

I made the correct turns this time and got us to the parking lot for the 1875 Yuma Territorial Prison State Park.  Very little of the original prison remains, but there is enough of it to give a feeling for what it was like.  The small museum does a good job of telling the story, but a tour guide (from Canada) helped fill in details and answer questions.  Although part of the Arizona State Parks system, it is operated by a local organization staffed by volunteers.

The prison and the Quartermaster State Park are the two main tourist attractions in Yuma.  Beyond those two things it is the closest city to Quartzsite with a good selection of major retailers.  Yuma is also home to Marine Corps Air Station Yuma and the U. S. Army Yuma Proving Grounds are just 20 miles north of town.  But the thing that interested us is that Yuma is the wintertime lettuce bowl of North America.  The flat topography and rich soil, watered by an extensive irrigation system fed by the Colorado River and worked by Mexican laborers, spreads as far as the eye can see and supports a vast crop of a large variety of leafy green vegetables.

From the prison I drove west on I-8, almost immediately crossing the Colorado River into the extreme southeast corner of California.  Eight miles later we exited onto CA-186 and headed south through the Quechan Indian Reservation to the U.S./Mexican border crossing at Los Algodones.  We parked in the Indian owned/operated lot and walked across the border into Mexico; our first ever visit to our southern neighbor.  We found it interesting that no one checked us on entry.

Los Algodones is an interesting and unusual little town.  It exists because of tourists from north of the border and has been developed to serve some specific needs of those visitors.  It has the highest concentration (and number) of dentists and optical shops of any place on earth and quite a few pharmacies too.  Many American and Canadian RVers come to this area during the winter months not only for the warm, dry climate, but for annual dental work, eye exams, glasses, and both prescription and over-the-counter drugs.  The vast majority of them park on the U. S. side and walk across the border.

We walked the streets of Los Algodones for an hour or more and finally settled at the Pueblo Viejo restaurant for lunch.  Linda and Marilyn had bean burritos and bottled mineral water.  I made the riskier choice and had a green salad and deep fried peppers.  The peppers were thinly sliced jalapeños mixed with sliced onions.  Linda and Marilyn had some too, but between the three of us we did not finish them; too hot.  At least they were authentic!  Puerto Viejo was the #2 rated restaurant on Trip Advisor and everything we read said the town was safe, including the food.  (The #1 rated restaurant was a sushi bar.)

The restaurant was just across the street from the port of entry so we walked over there and got in line behind a couple of hundred other people.  It took 30 – 40 minutes to reach the customs agent, but the sidewalk was shaded by an overhanging sunscreen and lined with benches so it was comfortable enough.  When it was finally our turn we each cleared customs in less than a minute and were finally back the U.S.A.  We got to use our credit card size passport cards for the first time.

We drove back to Yuma and found the major outdoor shopping mall where I stopped at Best Buy to look for a lens hood and cap for my Sony alpha kit/zoom lens (DT 3.5-5.6/18-70mm) but they did not have any compatible products.

The drive home up US-95 was very different than the drive down.  The clouds and fog were gone and we had a clear view of the mountains to either side of the valley.  Once we were north of the U. S. Army Proving Grounds the land to the east of the highway was part of the KOFA a National Wildlife Refuge, one of the largest in the country at over 650,000 acres.  (KOFA stands for “King OF Arizona, a large mine that once operated in this area.)  Between the Proving Grounds and the BLM land south of Quartzsite there are four roads that lead east into the refuge.  Overnight camping is permitted within 100 feet of the roads unless otherwise posted, but we saw very little evidence of anyone out there.  It is, however, a large, remote, area without any services so it only appeals to a certain kind of boondocker, such as those seeking solitude and a semi-wilderness experience.  I say “semi-” because if you can drive there in a 40′ motor home, or a pickup truck pulling a 35′ 5th wheel trailer, it is not wilderness by definition.

About 20 miles south of Q we turned off onto the KOFA NWR road leading to the Palm Canyon trailhead.  The canyon is a huge crevice in the 5,000 foot tall mountain and is home to the only indigenous Palm trees in Arizona.  The trailhead was another seven (7) miles in from the highway and the trail into the canyon was a half mile hike from there, so we will come back another time earlier in the day and do that.  The sun was getting lower in the western sky and the top of the very large mountain to our east was obscured by clouds so the situation was setting up for the possibility of good photographs.  We drove in about 3 miles (at 10 – 15 MPH) and then pulled off the road at a good vantage point to take photos.  We were rewarded for our decision as the sun bathed the mountains in glorious, warm light.

Although the road was generally good gravel and clearly defined we wanted to leave the refuge and get back to the coach while it was still daylight.  As often happens the sunset lingered and the colors deepened as we drove.  One of the challenges with shooting sunsets is that if you hang in there until it is over, you have to pack up your gear and extract yourself from the location in the dark.  Unless, of course, you are backpacking and have already pitched your tent right there.  The same goes for sunrise photography, only in reverse.

Back at the coach we had various snacks for dinner.  Butch brought the mail over and we chatted for a few minutes.  I worked on several e-mails from Gary at BCM, and Bob from our FMCA Freethinkers chapter.  I transferred photos from my camera to my computer and backed them up to the NAS.  I then used MS-ICE to create a couple of panoramas from today’s trip and used FIV to post-process them along with a photo of the mountain at sunset.  By the time I was done it had been a very long, but interesting, productive, and satisfying day.

View looking north from the 1875 Yuma Terriorial Prison State Park, Yuma, AZ.

View looking north from the 1875 Yuma Terriorial Prison State Park, Yuma, AZ.

2014/01/28 (W) Boomerville

After a light breakfast Linda and Marilyn drove to the local Farmers Market and also spent a little time looking around Desert Gardens.  Linda bought some asparagus and a Romanesco brocciflower, which is a cross between broccoli and cauliflower.  It grows in a fractal manor based on a Fibonacci number sequence which makes it visually very interesting.

While they were gone I worked on survey items for the FMCA NEC member education survey and suggested a minor change to the seminar categorization spreadsheet that Jim A. had prepared.  I had planned to work on my blog posts for the third week of October (2014) but did not get to those before lunch.

After lunch Linda and I drove out to the BLM Scaddam 14-day area east of town and found the site where Boomerville was set up all last week.  Most of the rigs had pulled out.  Many of them were also geocachers and moved to the Roadrunner area south of town.  We were looking for Bill Stewart and Lynn Pearlmutter from our FMCA Freethinkers chapter and finally spotted their Tiffin Phaeton.  We sat and chatted for over an hour and then headed back to camp where Marilyn had been re-treating in our absence.  I think it has been a good visit for her.

I worked on consolidating seven blog posts from the third week of October while Linda started preparing dinner.  For Marilyn’s final dinner meal (dare I say ‘last supper’) Linda made her mock stroganoff.  No, she did make Marilyn mock her stroganoff, she made a vegan version of stroganoff and served it over white rice, the way I like it.   She also steamed the Romanesco brocciflower.  The taste and texture was mostly cauliflower-like so I seasoned my pieces with a little white vinegar, which is the way I like my cauliflower.

While the ladies played Scrabble online I worked on the blog post and got the pictures selected and edited.  I was up very late again but I got it posted before I went to bed.  I was also having trouble logging in to RVillage using the Google Chrome browser.  I tried Firefox and got in without difficulty and was able to navigate the site.  Remembering that Butch had a similar problem a couple of weeks ago with a different website, I cleared the browsing history (cache) for the last week and tried again.  That resolved the problem, at least for now.  RVillage support had indicated that they were having login issues with the site, so my browser may have cached a bad page.  I primarily use Chrome to browse, so the bad page had probably not been cached in Firefox.

I spent some time on e-mails dealing with an issue we have in our FMCA Freethinkers chapter.  I updated Piriform CCleaner on my computer and ran it.  I then opened Piriform Defraggler, checked for updates, and started it.  It said the remaining time was “> 1 day” so I let it run and went to bed.

Although it was late I worked on the draft of my blog post for yesterday as I had only had time to outline it on my iPad.  I then worked on this post.  Even though I am still way behind in uploading posts to our WordPress website I have to write them each day or I lose the details.  It also takes a fair amount of time, and if I get behind I risk not being able to catch up.  I don’t have to do this at all, of course, but it’s something I want to do and enjoy doing.  I just don’t like being so far behind.

One of the many covered sidewalk market areas in Los Algodones, Mexico.

One of the many covered sidewalk market areas in Los Algodones, Mexico.

2015/01/29 (R) The Flying Nun

We have had an excellent visit with Marilyn since she arrived on the 22nd with a nice mix of local activities, distant sight-seeing, and quiet time at home to visit and allow her to read, rest, and contemplate.  She flew back to St. Louis, Missouri this afternoon but before she left Linda made vegan blueberry pancakes for brunch.

Marilyn’s flight home was at 4 PM MST from the Phoenix airport, which is over 130 miles east of Quartzsite, so they left at noon to get her there in plenty of time.  I stayed home to work and decided to reconcile the financial statements for our FMCA Freethinkers chapter with the copies of the bank statements I received yesterday from the Treasurer, who lives in Chico, California.  While I was at it I updated my financial statements and dues analysis worksheets and the master roster.  Linda called at 2:30 PM to say she was starting back to Q but that traffic was very heavy and she might not be back until after 5 PM.  That proved to be a very accurate estimate.

We had an early dinner that that consisted of a large salad and an equally large glass of Sangria.  I continued to work after dinner dealing with e-mails and then editing together the blog posts for October 23 through 29 into a single post.  I got the post compiled but it was too late (I was too tired) to select and process photos, much less upload the whole thing to WordPress, so I went to bed.

2015/01/30 (F) Regen Aggravation

Rain was forecast for last night and into today and that forecast turned out to be accurate.  It started raining around 11 PM and rained through the night and into mid-late morning.  The precipitation rate was never very high but the rain was persistent.  Even after it quit raining heavy clouds filled the valley and obscured the mountain tops in all directions.  There was a lower chance of showers for this evening after which the system is then supposed to start clearing out.

Marilyn does care for breakfast cereals or things that look, taste, or feel like milk, so we tended to have toast for breakfast while she was here (except when we had vegan cinnamon rolls and vegan blueberry pancakes).  This morning we returned to our normal breakfast of granola, fruit juice, and coffee.  After breakfast we both had work to do and set both of our laptops up on the dinette table.

Linda got a package yesterday from the bakery via UPS with work papers related to the 12th accounting period of the 2014 fiscal year.  This was also the first accounting period in which the bakery was running only on the new software.  Linda did the software configuration and conversion in September, October, and November of 2014 and the 12th accounting period corresponds approximately to the month of November.

My “work” was completing my blog post for October 23 – 29, 2014.  I selected 10 photographs for the post that were representative of the work described in the narrative, visually interesting, and technically OK.  I uploaded the text to WordPress and then uploaded, captioned, and inserted each image.  I got finished about the same time Linda got tired of staring at numbers and made pocket pita sandwiches for lunch. She went for a long walk afterwards and I turned my attention to our fresh water system.

I knew we were below 1/3rd of a tank of fresh water based on the monitor in the house systems panel.  I checked after lunch and we were at ~1/6th of a tank (~20 gallons).  The last time I filled the tank I checked the hardness afterwards and it was higher (3.0 grains per gallon, or gpg) than it had been.  After the last regeneration (recharge) it measured 1.5 gpg and continued to give that reading after each of the next few fill ups.  (It should have measured 0 gpg but I was not able to get it recharged to that extent.)   We have been keeping a log of the dates, gallons, and hardness but I had not yet analyzed the data so I added 100 gallons to the tank.  Afterwards I checked the hardness of the water coming out of the softener and it measured 25 gpg, which is the low end of the very hard water range.  Oops.

Although Los Algodones, Mexico was crowded and bustling with tourists from north of the border there were many quiet places like this.

Although Los Algodones, Mexico was crowded and bustling with tourists from north of the border there were many quiet places like this.

I did not want to leave that water in the tank and run it through our plumbing and fixtures, but I had to regenerate the water softener before I could do anything else.  I removed the filter from the housing on the input of the water softener.  It was brown all the way through from the outer surface to the inside, so it needed to be replaced even though I had just installed it when I did the last regeneration.  Quartzsite city water is safe to drink but in addition to being very hard it has a lot of sediment in it.  Butch also thinks it is over-chlorinated and Jim L., who qualifies as a local, just doesn’t think it tastes good.  The water we drink and cook with in the coach goes through three filters and a softener before it reaches our lips so we do not have any issues with it.

I put the special recharge tube into the filter housing and filled the bottom half of the housing around the outside of the tube with solar salt.  I then poured half of a container of Morton table salt (non-iodized) on top of the solar salt.  I aligned the center tube with the center of the head and threaded the housing onto the head.  I ran water through the filter housing and then through the softener until I got a strong salty taste out of the softener.  The instructions that came with the unit say to run water through the filter housing and out the softener until the saltiness is gone, but it gives no indication of how strong or weak the flow should be or how long it should take.

[When salt (NaCl) dissolves in water (H2O) sodium ions become available.  The special media in a water softener has an affinity for dissolved ions.  Recharging the softener dislodges the calcium (Ca) and magnesium (Mg) ions from the media and replaces them with sodium (Na) ions as a result of the supersaturated saltwater brine.  During normal operation the sodium (Na) ions in the softener are exchanged for the calcium (Ca) and Magnesium (Mg) ions in the water.  “Soft” water is not demineralized water, but the sodium (Na) ions do not cause the scale and build up in plumbing systems that the harder calcium and magnesium ions do.]

This is where we ate lunch in Los Algodones, Mexico.

This is where we ate lunch in Los Algodones, Mexico.

When the water coming out of the softener was very salty I reduced the flow to a small amount and let run.  I lost track of exact time, but I eventually shut the flow off, shut off the incoming water, and unscrewed the housing.  It still had salt in it; not as much as when I started, but too much to be done.

[It takes a certain quantity of salt to produce enough sodium ions (Na) to completely recharge a softener of some given capacity.  Softeners do not treat a certain number of gallons of water before needing to be regenerated; they remove a certain number of grains of hardness based on the design.  The harder the water coming in the fewer gallons that can be processed.  Softer water in, more gallons processed.  When you understand the science involved, it is really quite simple.]

I stirred the salt in an attempt to dissolve it and put the housing and tube back on the head and ran more water through it.  One of the problems with this arrangement is that I am starting with very hard water while trying to regenerate a water softener, but there is no easy way around that.  The other problems is that I do not have a sediment filter ahead of the softener.  If particulates are allowed to enter the softener and accumulate they will reduce and eventually destroy the effectiveness of the ion exchange media.  This is a design flaw that is easily remedied by adding another filter housing between the sediment filter and the inlet of the softener.  I will probably rig up something like this when I redo the water bay and use a clear housing so I can see when the salt is gone.  Assuming, of course, that I do not replace the entire system with one like Butch’s.

After fooling around with this for a while I tested the water coming out of the softener and it was still up around 15 gpg.  It appeared that nothing I had done for the last two hours had made any difference.  I removed the housing yet again and added an entire 26 oz. container of Morton non-iodized table salt.  I ran the water until it came out of the softener very salty and then shut it off.

I set the timer on my phone for one hour and drove down to the Tyson Wells market area on Kuehn Street to buy a T40 GAC (granulated activated carbon) filter from the Water Filter guy.  While I was down there I stopped and bought a loaf of Barry’s Basic Bread.  When I got back to the coach I ran the water for 30 seconds, shut it off, and set my timer for 20 minutes. I repeated this cycle for another hour and then set an outlet valve on the softener to emit a slow stream and let it continue to run.  I periodically tasted the water coming out and eventually it did not have any saltiness.  I checked it with a test strip, my third of the day, and it finally tested at 1.5 gpg.  Evening was approaching and I once again found myself in the position of having to finish this process in the dark, so I abandoned any hope of getting it fully recharged to zero (0) gpg, if the unit is even capable of that.

I opened the drain valve on the fresh water tank part way and let the entire 120 gallons drain out.  I did not like wasting that water, but I did not want it in our system.  I also do not like the amount of time and water it seems to take to regenerate our softener, but it’s what we have for now.  At least we are parked on gravel so all of the salty water can just soak in without harming anything.  In an RV resort with landscaping we would have to be careful not to discharge the brine onto the grass or plants.  The salt water is also not great for septic systems, but in sticks-n-bricks homes it usually ends up in one of those two places.

I installed a new 5 micron melt-blown polypropylene sediment filter in the pre-softener housing and screwed it back on to the head.  I let filtered water run through the softener and onto the ground to flush any remaining brine out of the tank.  While that process was taking place I turned my attention to the post-softener filter.

We have a filter housing built into the water bay of the coach.  Water enters the coach through a garden hose connection then (presumably) passes through a check valve before going through the filter.  From there it runs throughout the coach to all of the fixtures and the Aqua-Hot.  One of the fixtures is the fill valve for the fresh water tank.  When the onboard 12VDC water pump is used it simply takes water out of the fresh water tank and pressurizes the entire system the same way the shore line does.  The pump has a check valve to prevent the pressure from an external connection from forcing water backwards through the pump.

The filter housing is hidden behind a beauty panel that makes it awkward to access and service but I managed to get the housing loose and to remove it without spilling too much water.  The installed filter was just a pleated sediment cartridge but it was basically clean so either sediment was not getting this far or was small enough to pass through.  I installed the T40 GAC cartridge and put the housing back on the head.  I then turned off the water coming into the softener and connected the output to the hose from the fresh water inlet on the coach.  The directions said to flush out the T40 with at least five gallons of tap water before using the water so I filled the kitchen sink half full while running off of the shore line.

I started this process at 1 PM.  It was now 6PM and I was finally ready to fill the fresh water tank.  The T40 filter cartridge does not have a micron rating but it was a rather snug fit in the housing and the design looks like it could constrain flow rates.  I opened the fill valve for the fresh water tank and set my phone timer to 40 minutes.

While the tank was filling I started putting the dump and fill data we have been logging into a spreadsheet.  Our softener tank is the same size as Butch and Fonda’s, which is labeled as having a 10,000 grain capacity.  Our data indicated that the last 100 gallons we added took our total from 515 to 615 gallons.  We knew we had obviously run too much water through the softener based on the first hardness test today, but this data was confirming that we had, at most, a 10,000 grain capacity tank.  Given the 25 gpg city water coming out of the tap we will need to regenerate the softener somewhere between 400 and 500 gallons.  Given the aggravation involved in trying to recharge our unit I doubt that it will be a long-term solution for us.  It simply should not take that much time to do something so simple, especially when it has to be done so often.

At the end of 40 minutes the fresh water tank was 3/4s full so I set the timer for another 10 minutes.  With the current filter setup the flow rate into the tank appears to be about 2.5 gallons per minute.  The Shur-Flo 4048 pump has a 4 GPM maximum flow rate, so that is another reason we run off the tank rather than the shore line.

By the time the tank was full it was too late to actually cook dinner so Linda heated up an Amy’s Barley Vegetable soup and put out some crackers and peanut butter; easy but delicious.

I worked on this blog post after dinner, spent a little more time with my water usage spreadsheet, dealt with some critical e-mail, and went to bed way too late.  But then, I did not have to be up by any certain time and I can take a nap tomorrow if needed.

Palm Canyon at sunset.  KOFA National Wildlife Refuge about 20 miles south of Quartzsite, AZ.

Palm Canyon at sunset. KOFA National Wildlife Refuge about 20 miles south of Quartzsite, AZ.

2015/01/31 (S) January LTT

The last day of January dawned under cloudy skies.  We are well past the midpoint of our first winter in Quartzsite and continuing to enjoy our time here.  The “Big Tent” RV Show has been over for a week and the BLM STVAs (free, 14-day limit) have thinned out as the visitors who were here for two weeks surrounding the ‘show’ have moved on.  There are still lots of RVs in the BLM LTVAs (fee-based, up to 180 days) but those are longer-term visitors who, like us, are here for ‘the season.’  The commercial RV Parks in town still have healthy occupancy, but the ‘vacancy’ signs are out once again.  There are still plenty of vendors set up in the various markets along Kuehn Street and the flea markets along west Main Street are still operating.  There is still traffic but not the parade of RVs and gridlock of the previous couple of weeks.  There is still lots of activity but the frenzy appears to be over.  Experienced visitors have told us that we will notice a gradual slow down as we move through February into March.  We will also notice a general warming of temperatures.

A small bird of prey has been active around our campsite for the last few weeks, probably longer, and was finally successful in catching something to eat this morning; at least this was the first time that were aware of it.  It took a small bird down by the seed block that attracts various birds and rabbits to our ‘front yard’ and sat where we could see it while it ate.  WE identified it as an American Kestrel (Sparrow Hawk) and the small bird it caught was indeed a sparrow.  The American Kestrel ranges from 4 to 10 ounces in weight and has a wingspan up to 24 inches with the larger birds being the mature females.  It is the only Kestrel native to North America and is the first one we have had a good look at in the wild.  It normally eats large insects, small mammals, and lizards, but will take smaller birds if it can, thus the name.  They also have the unusual ability to hover given a very slight amount of wind.

We planned to stick around camp this weekend and work on various tasks so after breakfast Linda started a load of laundry.  I like laundry day because I get to stay in my sweat clothes while my regular ones get laundered.  Between loads Linda continued working on accounting for Butch and Fonda and for the bakery.  I prepared a 4-day and a 7-day consolidated blog post and then worked on reformatting and expanding some more survey items for the FMCA national education committee.  I received a draft report/recommendation from Jim A. for the seminar classification work we have been doing so I went through it, made minor corrections, and added several comments for his consideration.

Linda can only sit for so long so around 2 PM she made mock deli meat sandwiches for lunch with vegan cheese slices, lettuce, vegan mayo, and honey mustard on Barry’s Basic Bread.  She then went for a long walk while I continued to work at computer-based tasks.  She made it to the market area at Kuehn Street and Central Avenue and bought another loaf of Barry’s Basic Bread as we worked our way through the one we bought yesterday fairly quickly.

Butch installed his new TireTraker TPMS sensors yesterday.  (I still need to install ours.)  In the process he discovered that his Chevy Suburban spare tire only had 14 PSI of air pressure in it.  Worse yet the valve stem on his bus spare was too damaged to get the sensor on.  But the real problem was that one of the two attachments for the front bus bumper broke off.  Four bolts had rusted through and snapped.  This morning he looked at what would be involved it drilling out the pieces that were stuck in the threaded holes and decided that was not a job he could do on the road.  He bought some metal strap and fashioned two loops around the front of the bumper and behind the mounting plate and bolted the ends of each to draw them in tight.  When he was done the bumper closed and opened just fine and aligned well with the body when closed.  I joked that this might be another “Long-Term Temporary” repair, or “LTT” for short, and suggested that we should coin the phrase.

Linda made a new dish for dinner, Savory Orange Roasted Tofu and Asparagus.  As the name indicates, it consisted of tofu cubes roasted in a mixture of miso, balsamic vinegar, and olive oil to which asparagus was added while roasting continued.  A sauce is made from miso, balsamic vinegar, orange juice, and orange zest and mixed in to the roasted ingredients just before serving.  She also made Farro with a little oil, salt, and pepper and served it as a side.  It may be the first time we have had Farro all by itself rather than as an ingredient in a dish.  It really is a wonderful grain.  Clementine orange sections and Franzia Fruity Red Sangria completed the meal.

A Romanesco Boccliflower.

A Romanesco Boccliflower.

Towards the end of dinner I had a call from Neal Sunderland wanting to know if we knew of anyplace in Q where he and Nora could get prime rib (of beef) for dinner.  An odd request to make of a vegan, perhaps, but we only just met during the Eagles International bus rally and he did not remember how we eat.  Linda got on an iPad and did her best to find out what was in town.  The problem with Q is that a lot of the restaurants close at 8 PM, or sooner if they run out of food.  They were already driving when Neal called and he spotted a sign at the Stagecoach Restaurant on Main Street (B-10) for a prime rib special so they pulled in to the parking lot.  I heard the hostess in the background tell Neal that they were out of the special.  They had 37 of them available for dinner and they were all sold.  Yeah, Q is like that.

I have been reading up on the WordPress.com Jetpack: Site Administration feature.  It sounds very cool as it would allow me to manage multiple WordPress websites via my WordPress.com account.  This includes self-hosted sites, which all four of mine are, plus WordPress.com hosted sites.  I have the Jetpack installed on all four Websites but I have never activated the Site Management feature, which must be done from within the admin panel.  I decided to activate it tonight on the FMCA Freethinkers website, hosted by iPower.com.  The activation failed and took down the /WP-admin/control panel.  The site is still there (structure/functionality/content) but I cannot get to the dashboard to do anything.  I sent a support request to iPower and cc:d Bob Pelc, the President of the FMCA Freethinkers, who is the owner of the clubs iPower account.  I also sent a support request to Jetpack and an e-mail to Larry (K8UT) seeking his thoughts on the situation.  This was not how I wanted to end my day but there was little more I could do late on a Saturday evening, so I went to bed.

 

2015/01/22-26 (R-M) Q 2015 W4

2015/01/22 (R) Sister Marilyn

Marilyn & Linda in front of Beer Belly's "adult day care" outdoor bar.

Marilyn & Linda in front of Beer Belly’s “adult day care” outdoor bar.

The temperature dropped into the low 40’s last night in the wake of the cold front that brought strong winds to Quartzsite yesterday.  We were up at 6:30 AM to give us time to eat breakfast and enjoy our coffee before Linda left at 8 AM for the Phoenix airport to pick up her sister.  Marilyn was scheduled to arrive at 11 AM MST and the airport is a 2 to 2-1/2 hour drive from Quartzsite but Linda wanted to take her time getting there and be in the cell phone lot before the flight got in.  The plan was to go to lunch and then drive back to Q so she was going to be gone most of the day.

I had turned off the diesel burner on the Aqua-Hot last night so this morning I turned on the three electric toe-kick heaters and the Broan cube heater to take the chill off of the interior.  With the coffee pot also turned on we were drawing 26 A at 115 VAC on leg 1 and 15 A at 118 VAC on leg 2.  That was more current than we were able to draw before Jim L. changed the shorepower connection from 30 A (120VAC) to 50 A (240VAC) and the first time we have had reasonable voltage levels since we arrived here.

I rode over to the RV show with Butch at 9 AM to look at tire pressure monitoring systems and we both ended up buying TireTraker TPM Systems from Darryl Lawrence.  We have both done business with Darryl in the past and trust him as a vendor.  I also bought three products from the Carnu-B booth.

Back at the coach I checked the coolant level in the Aqua-Hot expansion reservoir.  It was right at the maximum cold level so there was nothing else to do for the moment.  I needed to redo the overflow hose, but not today.  I then used two of the Carnu-B products on the driver-side side window and surrounding painted body surfaces.  It removed the hard water stains and polished everything up very nicely.  I then did a test patch on the front of Butch and Fonda’s bus and it appeared to clean the stainless steel nicely.  They later cleaned an adjacent patch with straight food-grade vinegar and it seemed to work just as well although it did not provide a wax finish.

While I was fiddling with the Aqua-Hot and the cleaning/waxing process Butch started reading the manual for the TT-TPMS and found information that indicated the system did not work the way we thought it did and needed it to.  The manual more than implied that the sensors were activated by motion and stated that readings would appear “… within 20 minutes of starting to drive.”  Say what?!  We both want to use the system to check our tire pressures BEFORE we start to drive, as would most RVers.

Although there are things we do not like about our current Pressure Pro TPM systems they certainly give us the current pressure in the tires without having to drive the vehicle.  They also allow us to monitor just the bus, just the car, or both.  Most systems do this, including the TireTraker, but the Truck Systems Technology (TST) does not.  That was Butch’s first choice system until he found that out.

At 12:45 PM I rode over to the Quartzsite Senior Center with Butch and Fonda for a 1 PM meet and greet with Chuck Woodbury of RV Travel and the Geeks On Tour.  It ran until 4 PM but we were anxious to get back to the RV Show tent and talk to Darryl.  We took our TT-TPMS units with us with the intent of returning them but Darryl assured us that they do work the way we need them to so we decided to keep them for another day or so to test them.

Fonda had not been to the RV Show yet so we walked the entire tent.  I spent a little time talking to the guy at John Carrillo Hydronic Heating.  He had a brand new, never been fired, Webasto DBW2010 burner (with the controller) for $1,800 (cash).  I have seen them online for $3,300, so I knew that was a good price.  I wish I needed one, but we already have a spare.  He also had a new combustion chamber for $200 and I may go back and get one of those.  They wanted $450 for an ignition coil, which I also need, but I can get one from Sure Marine Service for $303.  We spent a long time looking at flag poles at the Flag Pole Buddy booth and Butch bought a 22′ model with an extra set of mounts.

Linda was texting me her status on a regular basis and by the time we got back to camp she and Marilyn were already there and relaxing on the porch of Joe and Connie’s park model trailer.  We sat outside until the sun kissed the tops of the southwestern mountains and then moved inside to escape the chill.  While we were sitting in the coach visiting and cooking Butch installed one of the TT-TPMS sensors on the driver-side front tire of their Suburban, programmed it into the monitor, noted the readings, and went for a test drive.  He noted the readings when they got back and plans to check it again in the morning before moving the car.  That will be the real test.

For dinner Linda made a nice green salad and a lovely mushroom kale risotto with Arborio rice.  We then went to the apartment so I could light the pilot flame on the wall-mounted propane heater.  I visited for a bit and then went back to the coach and Linda followed a bit later.  We were both tired and turned in early.

240 degree panorama from atop 'Q' Mountain, Quartzsite, AZ.

200 degree panorama from atop ‘Q’ Mountain, Quartzsite, AZ. Left edge is N, right edge is SSW.

2015/01/23 (F) Q Mountain

We were up by 7:30 AM and Marilyn eventually arose and joined us for coffee and toast.  The only bread we had was a package of whole wheat pitas, but they toasted just fine and were very good with orange marmalade.  I am not, however, thrilled with the Soy Delicious Almond milk coffee creamer.  It is not as ‘creamy’ as Silk soy creamer and it tends to separate into tiny bubbles in the coffee.  I do, however, like the Almond milk that we sometimes buy, especially on granola type cereals.

Butch called just after breakfast to let me know that the TireTraker TPMS works the way Darryl said it does.  That was welcome news as we both like the system, including the small sensors and the rechargeable monitor, and we both like Darryl.  He and Fonda had things to do today so I borrowed his hose crimper pliers before they left.

Linda and Marilyn left shortly after Butch and Fonda and drove to Blythe, California to do some grocery shopping and sight-seeing.  That left me with some alone time to concentrate on getting some things done that I have needed to work on for a week, such as categorizing FMCA seminars, and have just not found (made) the time.  I value and enjoy my work with the FMCA National Education Committee but we have a significant personal investment in our presence here in Quartzsite, and although we will likely return here again in the years to come that is not guaranteed, and this could turn out to be a once-in-a-lifetime experience.  The FMCA work took about an hour to complete and e-mail too Jim A., with who has been the lead person on this.

I also needed to make a minor change to the Aqua-Hot expansion tank plumbing and turn the burner back on.  I removed the overflow hose, shortened it, re-routed it, and re-connected it to the drain tube on the tank.  I also tried to tighten the clamp on the middle zone pump hose.  I noted that the coolant level was at the ‘minimum cold’ mark on the expansion tank.  I will check everything again tomorrow.

With the Aqua-Hot project done I decided to replace the old Sentry turbo boost gauge with the new VDO gauge.  I removed the dashboard cover, disconnected the lightbulb connectors, removed the retaining bracket, and pulled the gauge out the front of the dashboard.  I removed the lightbulb socket to give me better access to the main air fitting and undid that, completely freeing the unit from the dashboard.  I pulled the light socket out of the new gauge to give me more room to put the air fitting on and to check the bulb type.  It was a miniature glass wedge base 12VDC 3W and will need to be replaced with a 24V, 3W bulb.  I then slipped the gauge into the dashboard from the front and secured it with the supplied bracket on the back side.  Linda and Marilyn returned at this point so I quit working on the gauge, put the cover back on the dashboard, and helped bring in the groceries.  I will have to get the 24V bulb and also rewire the leads to match the harness connectors.

We had a light lunch and then drove down to the market area and wandered through the big tent RV show.  We got new Ballisti-Tech screen protectors for our Samsung Galaxy S III smartphones.  We also strolled through a small part of the Tyson Wells and Prospectors Panorama areas.  When we left the RV show we headed south on US-95 to the BLM Roadrunner STVA so Marilyn could see the Quartzfest RVs in the desert.  We found Lou and Val Petkus at their 5th wheel and visited briefly before heading back to town.  The light was good and the sun was still high enough that I made an impromptu decision to climb Q Mountain and try to get pictures of the RVs spread across the desert around Quartzsite.

I got my pictures, and got off the mountain before it got dark, but missed the best color, which we saw while driving back to camp to close up the rig before going to dinner.  The Geeks were out viewing and photographing the sunset before walking to the Grubstake restaurant for dinner so and we chatted with them briefly and then drove to Crazy Jerry’s for our evening meal.  The very thin crust mushroom, onion, and tomato no-cheese pizza was excellent and the French fries were also good.  When we got back to our coach Linda prepared some fresh strawberries for desert.

After visiting with Jim and Chris on Wednesday we decided that we would join the Quartzsite Yacht Club, which claims to have the largest membership of any yacht club in the country (world?, universe?) at over 7,500., although we later heard that it was more than 9,000.  Membership is $30 which gets you a hat, T-shirt, membership card and certificate.  Apparently the membership is good at other (real) yacht clubs that honor reciprocal arrangements.  We had planned to join today but did not fit it in.  It may be Sunday or even a day next week at this point.

I spent some time transferring photos from my camera to my laptop computer and our NAS unit.  I processed three panoramas and three individual images taken on Q Mountain, checked my e-mail, and went to bed.

Sunset glow looking NE from 'Q' Mountain.

Sunset glow looking NE from ‘Q’ Mountain.

2015/01/24 (S) Lake Havasu City

We were up at 7:15 AM and I brewed a pot of coffee while Linda showered.  I took my turn and also trimmed up my beard a bit.  Marilyn came over around 8:25 AM and we all had coffee followed by breakfast.  Linda and I had granola while Marilyn had toast and jam.  She is not that found of breakfast and does not care for milk or milk substitutes.

I removed some of the parts boxes from the back of the Element to eliminate the rattling just in case we decided to drive in to the Desert Bar on the way back from Lake Havasu City (LHC).  We left around 9:15 AM and headed up AZ-95 towards Parker.  It was a cool morning with clear skies and the sun lit up the mountains to the west and north.  When we got to Parker we decided to cross the Colorado River into California and take the Parker Dam Road 17 miles up to Parker Dam, drive across back into Arizona, re-connect with AZ-95, and continue north to LHC.

We knew that the stretch of the River from the dam downstream to Parker had quite a few RV Parks, campgrounds, and mobile home communities because we caught glimpses of some of them from AZ-95, or saw signs for them, the last time we were in LHC.  The drive from Parker to LHC is very scenic but you do not have a view of the river most of the time.  Much of the drive from Parker to the dam on the California side, however, was close to water level so we were able to see the resorts on both sides of the river.  We had also heard that there were wild burros along the California route and indeed there were.  We saw five total, two of them just before the dam.  They appear to be docile animals, but they are wild, and you are not allowed to feed or harass them.

Once we got to LHC we followed the signs for the London Bridge and found the parking lot and visitor center.  We watched a video on the history of the London Bridge, which was actually the second most recent in a long succession of bridges across the River Thames dating back before Roman Times.  The Bridge was purchased, disassembled, moved, and reconstructed in LHC.  It was placed at the entrance to a peninsula and then a channel was dug out under it and connected to the Colorado River on either end, turning the peninsula into an island.  There is an “English Village” at the base of the bridge on the mainland side, which was not very special, but a wonderful pedestrian path winds along the channel all the way down to Rotary Park.  The air was cool and the wind was very strong, but the sun was very warm and we had a lovely stroll.

After walking the path we drove over the bridge and around the island, stopping at one of the reproduction 1/8 scale lighthouses.  The LHC Lighthouse Association has erected some two dozen scale replicas of U. S. Lighthouses.  The ones on the island are all replicas of lighthouses from the Great Lakes while the ones on the Arizona shore are east coast replicas and the ones on the California shore are west coast replicas.  While we were driving Linda researched places we might be able to eat lunch and settled on The Black Bear Diner.  She and Marilyn had garden burgers with French fries and I had the Sweet Garden Harvest Salad.  All of the food was very good, and I was particularly pleased with the salad, which had raisins, dried cranberries, nuts, fresh strawberries, and shredded coconut with a honey Dijon dressing.

The restaurant was in a corner of the parking lot for the Albertson’s grocery store so we went in looking for regular Silk soy creamer.  They did not have any so we started back to Quartzsite and stopped at the Basha’s market on the south end of town.  They had the Silk Vanilla Soy Creamer, not the regular, but I got some anyway.  They also had a nice selection of Daiya cheeses and vegan sausages.  We picked up some sourdough bread and preserves on our way to the checkout.  Of all the food stores we have been in Basha’s was the nicest so far.

By the time we got to Parker I was getting tired so I pulled into the casino parking lot.  I switched places with Linda and she drove the rest of the way to Q.  Back at camp she and Marilyn went to the apartment and started assembling a 500 piece puzzle on the dining table.  As I do on any day that I have taken a lot of pictures I transferred them from my camera to my computer and backed them up to the NAS unit.  I used the Microsoft Image Composite Editor to create two panoramic images of the California mountains just south of LHC.

None of us were hungry enough to warrant fixing dinner so we snacked on hummus and chips (vegan junk food).  Marilyn went back to the apartment at 9 PM and we went to bed shortly thereafter.  A long day of fresh air and sunshine had once again worn us out.

2025/01/25 (N) Visitors

Linda& Marilyn at the London Bridge English village.  It's a real London phone booth, but no phone.

Linda& Marilyn at the London Bridge English village. It’s a real London phone booth, but no phone.

Today was basically a stay at home day.  Marilyn is officially “on retreat” and spent part of the day by herself reading and contemplating.  I made coffee for breakfast, as usual, and Linda made her amazing vegan cinnamon rolls for brunch.  They were brunch because they take hours to make and she did not feel like getting up early enough to have them ready by breakfast and we did not expect her to.

Butch dropped Fonda at church and then came back to get me on his way to the Big Tent RV Show.  Today was the last day of the show so I bought a 2″ wide roll of rescue tape and got three smaller rolls in the deal.  I bought more of the Carnu-B wax but the vendor was out of the Metal Shine cleaner.  That’s the risk one takes waiting until the end of a rally or show.  I also bought two small LEDs that looked like the might work in our spotter/downlights.  We then stopped by Mac McCoy’s booth to chat.  He was busy with customers but Charles Martin was there so we chatted with him instead.

We got back to camp just after 11 AM as Linda was putting the finishing touches on the cinnamon rolls and Marilyn joined us for brunch.  I tried one of the new LED bulbs but it would not fit in our fixtures.  I dealt with some e-mail and thought about spending the rest of the day writing but decided to work outside instead.  My outside task today was cleaning some of the bus windows using the Carnu-B Metal Shine to remove hard water stains.

Chris and Jim of Geeks On Tour did their weekly live broadcast from their rig and then started making preparations to leave.  We had two cinnamon rolls left so Linda took them over as a going away gift.  Charles and Connie Martin dropped in and a short time later Mara and her friend Michael arrived.  Marilyn came over followed by Butch and Fonda so we circled the chairs and had quite a gabfest.

Eventually everyone left and I returned to my window cleaning while Linda and her sister started preparing dinner.  Linda made her wonderful warm Farro dish with kale and dried cranberries while Marilyn made a shredded Brussels sprout dish with pistachios and dried cranberries.  Both dishes were excellent and the use of dried cranberries in each one tied them together nicely.

Linda and Marilyn went to the apartment to watch Downton Abbey but the satellite receiver was not activated so they worked on the jigsaw puzzle instead.  I stayed in the coach and took a call from Lou Petkus who had questions about RVillage.  I then consolidated my blog posts from the first seven days of October (2014) into a single post, selected five photos to go with it, and uploaded it to our WordPress site, the first post I have done since September 30, 2014.  If I do one consolidated post each evening I should be caught up to our arrival in Quartzite on December 12, 2014 in about two weeks.  After that I may go back to daily posts or continue to consolidate three or four days at a time.  I would like to be caught up and making current/daily posts by the time we pull out of here on March 1st.

London Bridge in Lake Havasu City (LHC), AZ.

London Bridge in Lake Havasu City (LHC), AZ.

2015/01/26 (M) A Plethora of Jims

We had toast and jam (strawberry preserves and orange marmalade) for breakfast along with our usual coffee and juice.  Jim A. called just after breakfast to update me on work we are doing for FMCA HQ.  Jim G. (&  Chris) pulled out yesterday.  Jim B. (& Barb) are here for the winter.  Jim L. (The brother of owner Joe L.) manages this place and stops by almost every day.  I think we have met several other Jims along the way.  When we meet someone new I just assume their name is Jim until I learn otherwise.  This winter has truly seen a plethora of Jims.

Jim and Barb let me know they were headed to Blythe, California to go grocery shopping and offered to pick up anything we might need.  Butch and Fonda also left but Larry and Sandy did not, which was unusual for them.  Linda and Marilyn wanted to walk around Tyson Wells so I drove them down to Kuehn Street and Central Avenue, stopping at the Post Office on the way.  I stopped on the way back at Herb’s Hardware store to get some 000 steel wool and then topped off my fuel tank at the Union 76 station.

Connie Martin visiting us at the Camp Liebherrvile / Brocker.

Connie Martin visiting us at the Camp Liebherrvile / Brocker.

Back at our coach I started assembling my blog posts from October 8 through 15 into a single post and selecting photos to go with it.  I do not like to sit and do this kind of work for long stretches of time so I got out my cleaning supplies and worked on the outside of some of the bus windows.  I tried using straight vinegar to clean them followed by rubbing with the steel wool, and tried it in the opposite order.  I decided to stick with steel wool first figuring the vinegar would help clean it off.  I did not apply wax to the outsides of the windows as I want them as clean as possible before I wax them.  Rain was forecast for today and it eventually started so I moved indoors and cleaned the insides of several windows on the passenger side of the coach.  These were clean enough that I used the Carnu-B spay wax that I bought yesterday on them.  The rain let up so I moved back outside and worked on the upper windshields.  I got both of them steel wooled and wiped down with vinegar and got a coat of wax on the driver side glass before it started drizzling again.  I put my supplies away again and headed back inside.  Linda called and asked to be retrieved so I drove back down to Kuehn and Central to pick them up.

Linda put out some hummus, chips, and grapes for lunch and we heated up the leftover Farro dish and divided it up between us.  Marilyn went back to the apartment to take a nap and Linda laid down to read and snooze while I continued working on e-mails and blog posts.  Gary Hatt, publisher of Bus Conversion Magazine, sent me several photos of himself standing in front of his Eagle.  I selected the one I thought would work best to go with his “Publisher’s Letter” in the January 2015 issue, post-processed it several different ways, and sent it back with an explanation of what did and why.  I also got the blog post for the second seven days of October completed and uploaded before dinner.

Mara Culp and Charles Martin visiting us at Camp Liebherrville / Brockner.

Mara Culp and Charles Martin visiting us at Camp Liebherrville / Brockner.

As the afternoon progressed the rain settled in.  Although not heavy, like a thunderstorm, it was steady well into the evening.  Jim and Barb returned and Marilyn eventually came back over to the coach.  That got Linda out of bed and working on dinner.  She made a dish that has become a standard; pasta with onions, garlic, mushrooms, and sun-dried tomatoes lightly sautéed in olive oil.  Instead of wheat noodles, however, she used “zoodles.”  Zoodles are long slender pieces of zucchini made with a hand operated SpiraLife spiral slicer.  They get added to the sauté just before serving and are simply heated rather than cooked.  We had a green salad with Ken’s Steak House Asian Sesame dressing, dried cranberries and pistachios.  We had slices of a sourdough baguette with pepper spiced olive oil for dipping and Linda and I had a glass of Franzia sangria.  Fresh strawberries for desert completed a nice meal.

Marilyn helped with the dishes after which she and Linda checked on the developing storm out east and then played Scrabble and other games while I stayed out of their way and worked on this post.  Hey, it’s a small kitchen.

The rain stopped at 7:38 PM but started again in earnest around 8:30 PM.  It was still raining at 9:15 PM when Marilyn went back to the apartment and the forecast said we could have rain overnight until 5 AM tomorrow.  We have had very little rain here this winter so I am sure this is welcomed.  It will be interesting to see if the precipitation triggers any sort of desert bloom tomorrow on our drive to Yuma or perhaps the following day.

Linda’s iPad battery was down to about 10% at 9:45 PM so she retired to the bedroom, where the charger is located, and continued to read for a bit longer.  I am usually very sleepy an hour after dinner but get my second wind a couple of hours after that.  I had an e-mail from Gary at Bus Conversion Magazine regarding the use of soft water in the Webasto-based Aqua-Hot in his Eagle and sent him a reply.  I then went through the article on Butch’s main engine air-compressor failure, finalized all of the changes, and uploaded it to our Dropbox along with the photo files.  I updated my BCM Article Status Sheet and uploaded it to the BCM folder in our Dropbox.  I then e-mailed Gary and editor Mike Sullivan to let them know that the new material was ready and available.  By the time I finished it was going on midnight.

 

2015/01/8-14 (R-W) Q 2015 W2

2015/01/08 (R) Up On The Rooftop 

A panorama from the roof of our bus.  Left edge is NE, center is S, right edge is NW.

A panorama from the roof of our bus. Left edge is NE, center is S, right edge is NW.

As forecast, we woke up to cloudy skies and milder temperatures.  The clouds to the southwest looked like they might produce rain but the winds were blowing gently from the southeast so the rain would not be for us.  This was the day we’ve been waiting for, the perfect kind of weather for washing a bus.  But not first thing in the morning.  Coffee and breakfast come first while we wait for slightly warmer temperatures.

The waste water tank level sensors are not accurate but our fresh water tank sensors are OK.  The fresh water level gauge was showing less than 1/3 tank and the grey water tank gauge was showing full so it was probably time to dump and fill.  When I checked the fresh water level visually we were at 1/6th tank.  I dumped the black water tank and then the grey water tank, both of which were fairly full, and then filled the fresh water tank.  I have the city water regulated to ~50 PSI (static) which drops to ~30 PSI when the fill valve is fully opened.  At that pressure it takes about 40 minutes to fill the tank.

I last dumped the waste tanks on December 30th and added 25 gallons of (hard) fresh water.  On December 31st I added another 30 gallons of (hard) fresh water.  On January 2nd I recharged our water softener, drained about 1/6 tank (~20 gallons) of (hard) fresh water and filled the tank with 120 gallons of soft water.  I checked the hardness of the water coming out of the softener after that fill and it was 1.5 grains/gallon (25 ppm).  I checked it again after today’s fill and it was still 1.5 gpg.  Since we are keeping a log of the dumps and fills I plan to check the hardness after each fill so can regenerate the water softener before it gets depleted and we end up with really hard water in our tank and system.

Butch happened to be at the Post Office Annex today checking the P. O. Box at exactly the same moment a postal worker was about to put something in the box and then stopped because of the forwarding tag.  The “something” was our package of water hardness test strips from Bristol, Indiana and the worker was kind enough to give it to Butch to give to us.  He also learned that they still have P. O. Boxes available so he went to the main post office to find out more about that.  He came back with a form to fill out and it had room for all of our names so the six of us are going to share the box and the cost, which is $56 for six months, or just under $20 per couple.

While the fresh water tank was filling I started getting ready to clean the roof by getting out our Little Giant step/extension ladder and various cleaning supplies.  The dump and fill was done by 11 AM and it was warm enough by then to start working.  Swim trunks, a white T-shirt, and Kean sandals was the uniform of the day.  I carried the hose sprayer up the ladder with me and then lowered it down to use as a hook and lift wash water bucket, scrub brush, and other paraphernalia up to the roof.

It turned out to be sunnier than I had hoped but I worked for about four hours, not including a lunch break, and scrubbed the entire roof.  I used McGuire’s red automotive soap and rinsed thoroughly.  I had already washed the roof once using Dawn dish soap (a big ‘no no’, apparently) and a long-handle soft brush.  That washing had removed surface dirt and revealed the full extent of the dark “spotting” that gave the entire roof a mottled appearance.  The roof looked a lot better after I scrubbed it but a lot of the spotting remained.

We are anxious to clean the sides of the bus but there is no point doing that until we are done with the roof.  We want the roof “like new” clean so dirt doesn’t run off it onto the sides, but we also want it clean because we are seriously considering having Discount Solar (here in Quartzsite) install solar panels and a charge controller and do all the wiring.  As long as we had the hose, brushes, and soap out we decided to wash the car.  It was even filthier than the bus, if that’s possible, and it was nice to finally have it clean.

After cleaning up our equipment I got cleaned up and then sat and visited with Butch for a while.  Linda came over and announced that she wanted me to take her to dinner.  Butch and Fonda decided to go too so we went to Crazy Jerry’s, which is not to be confused with Silly Al’s.  Silly Al’s is supposedly the #1 eatery in Q, at least for pizza, but they have karaoke every night starting at 7 PM.  Thank you, no.  Crazy Jerry’s also has pizza and we tried the vegetarian, hold the cheese.  Very thin crust (the way we like it) and lots of topping.  A couple of side salads and a side order of French fries.  FWIW, we did not eat the entire pizza and brought home the leftovers.

Linda split a pair of Scrabble games with her brother, the first one he has won in quite some time.  She had an e-mail reply from Mara.  She is camped about 70 miles south of Q and is headed here in the near future and is going to camp with the WINs (Wandering Individuals Network).  I checked e-mail, updated my BCM article spreadsheet with two more story ideas, played a few games, and worked on this post before turning in for the night.  We will have been here a month as of Sunday.

The Hi Jolly Daze Parade.  Quartzsite, AZ

The Hi Jolly Daze Parade. Quartzsite, AZ

2015/01/09 (F) The P. O. Box

I left the ladder setup yesterday so I could check the roof again this morning and determine what additional cleaning measures, if any, I might want to take.  I also wanted to get back up on the roof and measure the space we have available for solar panels.  I was expecting two packages via UPS; one from B&H Photo (Manfrotto nodal panoramic tripod head) and one from Sure Marine Service (Webasto repair parts).  I had a nice view of the mountains surrounding Quartzsite from the roof of our bus and wanted to shoot some panoramas with the new head when it arrived.

Butch, Fonda, Jim, Barb, Linda, and I all went to the U. S. Post Office in Quartzsite this morning to sign up for our very own P. O. Box which means we finally have a way to receive USPS mail while we are here.  Just in time, too, as Q has really filled up in the past week and there is more to come.  I have an FMCA national education committee meeting on Monday and need to write a few items for a member survey and review other materials.  Gary (from BCM) is also due to arrive on Monday, and both Curtis (from RVillage) and Mara Culp (HFH build acquaintance) may be headed this way as well.  I believe Chris Dunphy and Cherie Ve Ard of Technomadia are already in the area.  The big RV tent is up and those vendors are arriving and setting up.

Once we were done at the post office I went to Discount Solar to discuss a possible installation on our coach.  The Kyocera panels are 26.5″ W x 59.0″ L.  They are “12 V panels” but are rated at 140 Watts putting out 7.9 Amps.  They cost $350 each.  Those numbers compute to an output voltage of 17.5 VDC and $2.50/W.  (If a 140 Watt panel was operating at 13.8 Volts it would produce just over 10 Amps.)  Because we have a 24V battery system we would need to install the panels in series-connected pairs.  The preferred installation for the rectangular panels is to have the long dimension lined up fore-n-aft to either side of the centerline of the roof.  Tilt mounts are available ($45/panel) but we would probably not install them due to the difficulty of getting onto our roof to use them.

“12 volt” batteries typically charge at around 13.8 to 14.1 volts.  Our “24V” system charges at 27.6 to 28.2 volts and a series-connected pair of panels produces 7.9 A at 35V (full sun) for 276.5 volt-amps, which is essentially “watts.”  Two pairs would produce 15.8 A (553 V-A), and three pairs would produce 23.7 A (829.5 V-A).  The higher voltage output of the panels is reduced and regulated by a solar charge controller before getting to the batteries.  Discount Solar carries Blue Sky and Trimetric maximum power point tracking (MPPT) controllers and the Blue Sky Solar Boost 50 would handle three series-connected pairs for about $550.  The MPPT controllers are DC-to-DC converters so they convert the excess voltage into additional current.  With full sun this six panel system could supply up to 30 A of charging current at the proper voltage, which is why we would need an MPPT controller that can handle more than 30 A of charging current.  We would also want room for expansion or replacement with higher wattage panels if they were available at some point in the future.  One of the nice things about the solar system is that it would always be on and would “play nice” with our other charging systems. Another nice feature is that they are silent when operating.  Ahhhh.

Because of the size of our house battery bank (400 A-Hr at 24 VDC) and the fact that we have a residential refrigerator, auxiliary air-compressor, and other AC loads, we would need/want at least six panels.  (I have not included the four Group 31 wet cell batteries that are used to start the engine and power the chassis as part of the solar system.)  If the batteries were discharged 50% (200A-Hr) it appears that it would take just under seven hours to bring them back to full charge based on the 30A charging current.  In actuality it would take longer in a boondocking situation as the sky is not always clear, the sun is rarely directly overhead (perpendicular to the panels), there would be devices using some of the energy, and the amount of current the batteries can accept falls off as they get closer to being fully charged.

Installation is $90/hour plus mounts ($15/panel), wire, connecting blocks, and other parts, and would take 4 – 5 hours to complete.  The owner assured me they would have it in and out in one day so we could be back in our parking spot before dark.  The last three weeks of January are the busiest time of year for Discount Solar and since we are plugged-in to shorepower we do not need the solar system right away.  If we have it installed in early February we would have a month to make sure it works and resolve any problems.  The system would cost about $3,300 installed.  We have at least a month to think about it.

When I returned to our coach Linda was out walking.  When she got back I went up on the roof with a tape measure to see if/how the solar panels might fit.  With a four-n-aft orientation we could put two towards the front outside edges, one just aft of the kitchen skylights on the driver side, and one aft of the hall skylight on the passenger side.  We could put two more somewhere in the rear.  The options for the rear appeared to be inline (almost touching) on the driver side starting just behind the bathroom skylight or putting one there and the other one sideways across the back just ahead of the dropped portion of the roof and aft of the bedroom vent fan.  Placing the panels in these locations would leave the center of the roof open so I could climb up on the driver side front and walk all the way to the back.

Barb stopped by to let us know there was a mattress in the house (park model trailer) if we wanted to try it out.  It had been in their rig for about two years until they removed it yesterday and replaced it with a thicker one they got from Connie.   It is a regular queen size mattress about 6″ thick, so not one of the oversized behemoths that have become the norm.  They also had a 1.5″ thick memory foam pad to go on top of it.  We took a look at it and decided to give it a try.

We have been using our old Select Comfort adjustable air mattress in the RV since summer 2013.  One side (mine) has a slow leak so I have to adjust it every other night.  I could live with that indefinitely but what we really dislike about it, and have for a long time, is that we tend to roll into the center or off the edge.  It also takes up valuable storage space under the bed for the pump, has wires and hoses to deal with, and has a controller for each side.  We were definitely ready to try something else so we stripped the bed, disconnected the two air hoses, and carried the mattress out of the bus.  It was surprisingly heavy and bulky for an air mattress and lacking in self-supporting structure, but that also made it easier to bend it around the front passenger seat, down the entry stairs, and out the door.  We stored it in the bedroom of the house trailer pending a final decision about the replacement mattress.

We carried the new mattress in, which was definitely easier than getting the old one out, and got it positioned on the plywood bed platform.  We put the memory foam pad on top and put our mattress topper over that which added another inch.  We put our electric heating pad on and then the sheets and the blanket.  We will try it out for a while and if we like it we will see if the Salvation Army wants the old one.  If not, it may end up at the Quartzsite dump as we really do not have any way to get it home or a reason to do so.  We will leave the pump, hoses, and controllers under the bed until we decide on its final disposition.

The suspension on the bus had settled slightly in the driver side rear since we parked and leveled it almost a month ago.  It would not have been enough to require an adjustment except that our bed sits crosswise with the head on that side and I find that sleeping with my head even slightly downhill is not comfortable.  Rather than start up the main engine we got the Dewalt portable air-compressor out of the car and connected it into the brake system fill port in the passenger side engine bay.  I had to connect the chassis batteries and turn the ignition on (without starting the engine) in order to activate the leveling controls, but that allowed me to raise that corner up and get the coach level side-to-side.  At some point we will re-position the bus, but not until I have completed some work on the turbo boost sensor mounting plate and hose and the level low system components for the front end.

We put the air-compressor back in its special storage divider in the car and decided to rearrange a few things so we could put the rear seat down.  Starting next week we will need to be able to carry a passenger.  We thought about heading down to the market area but remembered that we were expecting UPS deliveries.  I started working on two more articles for BCM instead while Linda went for a walk.  It was warmer today and so it was warmer in the coach and I ended up taking a nap.

Our UPS and FedEx shipments usually arrive late in the afternoon or early evening but had not shown up by dinner time.  I had planned to disassemble the Aqua-Hot burner and replace the bearings, nozzle, and perhaps a few other small parts tomorrow but it now appears that will have to wait until Tuesday, assuming our shipments arrive on Monday.  I will likely need to clean the unit as well, given that it has been running so rich, and that may include pulling the combustion chamber.

Linda made two cold salads for dinner; chickpea and wild rice Waldorf.  Both are favorites of ours, especially in warmer weather.  We had some Barry’s Basic Bread with our meal and another glass of Lamb’s Valley organic sweet white wine was a most agreeable accompaniment.

Yup, that's a real, live camel in the Hi Jolly Daze Parade. These animals are strongly linked to the 19th century history of Quartzsite, AZ.

Yup, that’s a real, live camel in the Hi Jolly Daze Parade. These animals are strongly linked to the 19th century history of Quartzsite, AZ.

2015/01/10 (S) Hi Jolly Daze Parade

Today was the annual Hi Jolly Daze Parade.  As first time winter visitors to Quartzsite there was no way we were going to miss this event.  I was up at 7 AM to make coffee and we were done with breakfast by 8 AM.  We checked the parade route online and figured we would go to the Quartzsite Improvement Association grounds as the parade ended in the parking lot there.  It was scheduled to start at 10 AM so we snagged Fonda about 9:40 and headed that way in the car.

When we got to Central Avenue and Main Street the police had Main Street closed so we could not turn left to get to the QIA.  I stayed on Central down to Kuehn Street and took it east over to the exit 19 overpass and back to Main Street.  On the way we saw Lloyd DeGerald’s motorhome parked along Kuehn with a big banner advertising his Aqua-Hot technician services.  I am hopeful that I will be able to repair both of our burners myself but if not Lloyd is the guy I would call, so I was glad to see that he is in town.  But back to the parade.

The police had Main Street closed on that end too.  We knew the parade started at Plymouth Avenue and Quail Trail so we headed in that direction and parked at the Quartzsite Library.  We were surprised that no one else was parked there as it was a short walk from there to the start of the parade route which turned out to be an excellent spot from which to view the parade.  What we realized after we got there was that the west side of Plymouth Avenue was lined with cars from the starting point all the way to Main Street.  I suspect that Main Street was similarly lined with people, most likely in cars, but we were not able to observe that directly.

We had a few drops of rain leading up to the start of the parade.  There were plenty of grey clouds around, but the sun was also shining and the parade did not get rained out.  In fact, a full 160 degree rainbow formed behind the parade and lingered until most of the participants had passed us.  The highlight of the parade was a live camel.

“Hi Jolly” was the Americanized pronunciation given to Hadji Ali, who came here in 1856 as part of an experiment by the U. S. Army in the use of camels.  There are conflicting accounts of his exact place of origin but it seems clear that he came to the U. S. from the Middle East as one of the first, and the lead, camel driver.  For a more complete account check the entry in Wikipedia for “Hi Jolly.”

The experiment did not work out as the Army’s horses, mules, and burrows were apparently terrified of the giant animals and would panic in their presence, but Hadji Ali remained in the U. S. and eventually ended up in Quartzsite where he died in 1902 and was buried in the local cemetery.  We got the impression that he was something of a living legend in his own time and in the 1930’s the governor of Arizona had a monument erected at Hi Jolly’s gravesite.  It is a small pyramid made of local stone with a metal plaque on one side and a metal profile of a camel on top.  According to Wikipedia the monument is allegedly the most visited location in Q.

When the parade was over we returned to our coaches.  Linda went for a walk and I wrote another article for Bus Conversion Magazine.  This was another short one, less than two pages and only 11 photos, on the installation of the new speedometer in our bus.  When Linda returned from her walk she made a broccoli-potato mash.  In addition to the broccoli and the potato it had soy milk, vegan butter, salt, and pepper.  The potatoes were not completely mashed and the dish was both tasty and had a nice mouth feel.

After lunch Linda made a shopping list.  We headed to the Kuehn Street market area and stopped at Barry’s Breads but our timing was bad, again.  We drove south on Central and found the entrance to the parking lot for “the big tent.”  This is where the RV vendors will be in another week or so, but nothing was open yet, so we went over to the Tyson Wells area west of Central Avenue and found some miscellaneous items and a pair of Crocs for me.  For all the shoes I brought I did not have something that was easy on, easy off.  We are parked on gravel and I needed something I could slip on quickly and easily to step outside the coach.

Most of Linda’s list was groceries so we drove to Blythe, California to do our shopping.  To vary our trip and see some new sights we stayed on Kuehn Street heading west past the edge of town where it became West Dome Rock Road.  The road parallels I-10 on the south side for a long way through BLM land and eventually ends at an interchange with the Interstate.  We saw lots of RVs, and a few tents, spread out on either side of the road, but not nearly as many as we thought we would.  There are probably a lot more RVs here than we realize, but the desert is a vast place.

When we got to Blythe we took a few minutes to drive through town and get a feel for the place.  It had a more developed, modern, and prosperous business district than Quartzsite and more houses, as opposed to park model trailers and mobile homes. The houses were not fancy but they were in decent condition.  Schools and municipal buildings were also nice, and there is nothing in Q to compare to the two supermarkets and name brand stores like Auto Zone, NAPA Auto Parts, and K-Mart.  We started at Albertson’s and got most of the items on our list.  We then went across the street to Smart and Final Express and picked up a few things there.  Once again we were not able to find the Silk brand Soy Coffee Creamer, which has us wondering if we last bought it at Wal-Mart in Parker.

When we got back to camp I unloaded the car and Linda put the food away.  I wandered over to say high to Butch and Fonda and play with their dogs, Daffy and Rascal, for a few minutes.  I then went over to say high to Jim and Barb’s dog, Roho, which brought them out of their motorhome and got me invited in.  Linda eventually wandered over looking for me and the four of us had a nice chat.  It was the first time since they got here that I had been inside their rig, a Country Coach Intrigue, and it was very nice.  It has one slide on the front half of the driver’s side, and there is no doubt that it really opens up the interior.  Before we bought our bus we were looking seriously at Country Coach motorhomes (but not their Prevost bus conversions) and the Tiffin Allegro Bus (which is a purpose-built motorhome, not a true bus).  But in the end we were bitten by bus fever and we still have it.

We stopped to visit briefly with Butch and Fonda on the way back to our rig.  Butch has always had an interest in metal detecting and has developed an interest in rocks since arriving in Quartzsite.  If you had the slightest inclination towards rocks, gems, and minerals then being in Quartzsite during the winter would likely push you over the edge into a full-blown hobbyist.  Sometime in the last couple of days Butch bought a used contraption that consists of a table saw, two grinding wheels with a water delivery system, and an electric motor.  He and Fonda acquired a bucket of rocks, including a piece of petrified wood, and they are setting up an area outside their bus to work on their new hobby.

For dinner Linda made pan-grilled tofu slices with caramelized onions and bar-b-cue sauce, but with a twist.  Instead of hamburger buns or slices of bread she heated 12″ tortillas and made wraps.  Of the various ways she has served this simple, but delicious, dish this was definitely my favorite so far.  As much as I like a nice, fresh bun the tortilla wrap kept all of the ingredients contained so that I got onion and BBQ sauce with each bite, and they did not end up all over my plate and all over me.

As we do most evenings, we relaxed, played games, worked puzzles, read, and wrote. We are always a bit surprised at how tired we are after dinner, but we are up and about during the day and the fresh air and sunshine just seem to wear us out.

The roof of our bus after cleaning looking SW as viewed from the driver side front corner.  Quartzsite, AZ.

The roof of our bus after cleaning looking SW as viewed from the driver side front corner. Quartzsite, AZ.

2015/01/11 (N) Swimsuit In January

I turned the lights off last night at 11 AM and was up at 7 AM this morning which seems to have become my current routine.  Because of the new (to us) mattress I was able to get up without waking Linda up.  I turned up the heat in the front of the coach but not the back as Linda does not sleep well in a warm room.  I started getting the coffee ready but did not grind the beans because of the noise it makes.  I worked at my computer on organizational tasks such as copying files to the NAS, copying blog posts from e-mail to Word, and backing up website and photo files to the NAS.

Linda got up around 8:30 AM and set the microwave convection oven to preheat in convection only mode.  When it was ready she heated up the leftover cinnamon raisin rolls she took out of the freezer yesterday and put in the refrigerator.  While the rolls were heating I finished making the coffee.  Although they are not gigantic, one of these rolls would probably be plenty of calories for breakfast.  Two rolls, however, made for a very satisfying meal.  Still, they take about four hours to make fresh and about 25 minutes to reheat.  She makes a batch of eight, so if we each had one for breakfast her efforts would cover four meals instead of two.

Today was another bus cleaning day, but first Linda went for her morning walk while I continued to organize photo files on our network attached storage device.  It was forecast to be a cloudy but mild day and by late morning the clouds had moved in, so when Linda got back we got busy.  Even with the cloud cover it was warm enough that I was able to wear my swimsuit and a T-shirt, my preferred outfit for working with water.  We bought some CLR Mold & Mildew remover yesterday and I tried using it on the lower rear roof.  It did not appear to have any effect so I abandoned any further roof cleaning and we got started on the sides.

The upper sides of our bus are not easy to clean.  Even with our Little Giant extension/step ladder set up as a step ladder at its maximum height I cannot quite reach the top curve of the side walls.  Knowing that was the case I cleaned all the way around the edge of the roof, where it meets the side walls and the front and rear caps, from the roof.  Once I was done with that we took the Little Giant extension/step ladder and converted it from extension configuration to step ladder configuration.

We worked all afternoon until after 5 PM and managed to clean the front and the passenger side.  We wanted to get the passenger side done because it faces south and we wanted to do this on a cloudy day.  Working a section at a time we used McGuire’s red automotive soap, scrubbed with an automotive microfiber sponge, rinsed thoroughly (with Q’s incredibly hard water), and dried with microfiber clothes.  We could not get all of the hard water stains off but it was a lot cleaner, and looked a lot better, than when we started.

The weather forecast for tonight was for heavy rain sometime between 9 and 11 PM with accumulations of up to 1/2″.  For a place that typically only gets 4″ of rain a year that would be a lot of rain for one storm.  We put our lawn chairs, mats, and other outdoor items in the carport for the night just to be safe.  Shortly after 6 PM we had our first sprinkles.

For dinner we had chickpea salad and wild rice vegan Waldorf salad with strawberries and peach slices and some Barry’s Basic Bread with a small glass of Franzia Fruity Red Sangria.  I responded to some e-mails after dinner and deferred work on possible survey questions for the FMCA national education committee until tomorrow.

Linda makes her selections at the Quartzsite Farmers Market.

Linda makes her selections at the Quartzsite Farmers Market.

2015/01/12 (M) E-mail Groups

It has stayed warm enough the last few nights that I have not needed the electric heating pad and we have been able to leave windows slightly open.  We both sleep better in a cool room with fresh air.  The deluge of rain that was forecast for last night did not develop but it was still mostly cloudy when we got up this morning.  After breakfast, coffee, morning puzzles, and checking in with the world we got on with our chores.

My major tasks for the day revolved around preparations for, and participation in, a 2 PM FMCA National Education Committee work session.  While I worked on that stuff Linda went for her morning walk, made an appointment to get her hair cut tomorrow, and made garlic naan (Indian bread) from scratch.  When the phone meeting was over I transferred photographs from my camera to my computer and then joined Linda over at Butch and Fonda’s coach for a late afternoon visit.

Jim L. showed up while we were chatting, read the electric sub-meters, and figured out our bills.  Linda had to write four separate checks to cover our site fee, electricity usage, laundry, and the rental for the apartment, which Jim gave to Barb to cover the cleaning before and after Marilyn’s upcoming visit.  Butch placed an order with PartDeal.com for a VDO speedometer so I had him order a VDO Cockpit Series 0-30 PSI Boost Gauge for me.  The UPS truck also showed up and had the two packages I have been waiting for.  All too soon the sun dropped below the western mountains and it turned chilly so we retreated to our coach.

Linda made curried red lentils for dinner and served it along with the garlic naan bread she made earlier in the day.  Warmed and energized by this fabulous meal I launched into my second major task of the day; the creation of an e-mail group in Microsoft Outlook for our FMCA Great Lakes Converted Coaches chapter.  I got the latest roster from Linda, who is the treasurer, and was able to rearrange it, save it as a CSV file, import it into Outlook, and map it to the standard contact fields.  It was then easy to create a Contact Group and select all of my new entries to go in it.  Once I got the group set up I wrote an e-mail to the members, my first since being elected President of the chapter back in October.  I was up much later than usual, but I got it done.

Escapees RV Club happy hour SE of Q in one of the BLM STVAs.

Escapees RV Club happy hour SE of Q in one of the BLM STVAs.

2015/01/13 (T) Geekiness

Today was a day for Geeks and geekiness.  Chris and Jim Guld, AKA The Geeks On Tour, arrived in Quartzsite yesterday and are staying at an RV Park not far from our encampment.  Butch knew they were headed this way and after he and I were unable to get EchoLink working on his computer yesterday he contacted Jim to see if he would be willing to stop by and take a look.  Jim is a former network administrator and knows a lot more about stuff like networking, protocols, ports, port forwarding, and proxy servers than we do.  But before he came over Linda and I had breakfast after which she walked over to the beauty parlor and got her hair cut while I worked on a seminar classification task for the FMCA National Education a Committee.

Jim G. arrived on his bicycle around 10:30 AM and stayed for a couple of hours.  He re-checked the things Butch and I had already tried and tried some things we had not, but we could not get Butch’s system to let the EchoLink program connect successfully to the EchoLink servers.  For the record, Butch’s system consists of a Windows Vista laptop that connects to the Internet one of two ways:  1) through a Verizon MiFi or,  2) through a WiFiRanger Go2 into a WiFiRanger Mobile into a DSL WiFi gateway of unknown make and model.  Jim also tried connecting through the WiFi hotspot on his Android-based smartphone.  Same result.  Mixed in with work we had a great visit with Jim and hope to meet up with he and Chris at least once while they are in Q.

After Jim left Linda and I were headed in to have a bite of lunch when an unfamiliar car pulled into the lot.  Barb was by the road and pointed the driver in our direction.  We quickly realized that it was Mara.  She had called Linda first but Linda did not hear the phone ring so it was a wonderful surprise when she showed up.  We visited for a couple of hours while we snacked on hummus, pretzels, and red grapes.

Mara is camped on BLM land north of town with the WINs (Wandering Individuals Network) and has been traveling off and on with groups of WINs since we last saw her in Gillette, Wyoming in July 2013.  Since that time she has also gotten a different motorhome, a 35′ Fleetwood Bounder, with which she is very pleased.  She invited us to join a group of WINs on Sunday to go to The Desert Bar and I think we will.  Linda checked it out online and it is a completely solar-powered, off-the-grid, place.  You have to take dirt roads or ATVs to get there.

It appears that things are finally going to get busy for us.  Gary, from BCM, is supposed to arrive tomorrow and Curtis, from RVillage, is supposed to arrive on Saturday.  Forrest and Mary are already here as are Chris and Cherie of Technomadia.  The Escapees RV Club has happy hours scheduled tomorrow and Thursday at one of the BLM areas east of town.  Blythe, California has a bluegrass festival starting Friday and running through Sunday.  We will probably go on Friday as there is also a Balloon Festival in Lake Havasu the same three days which we will probably attend on Saturday.  Somewhere in there I need to repair our Aqua-Hot and I am thinking that it will probably be Thursday.  The “Big Tent” Sports, Vacation, and RV Show starts on Saturday (17th) and runs through the Sunday the 25th.  Marilyn arrives on the Thursday the 22nd and leaves on the Thursday the 29th.  The last full week of January really is the peak of the winter season in Q.

After Mara left I used my macro lens to photograph the front and back of both of our amateur radio operator licenses.  I post-processed the images to improve the readability and reduce the file size.  Once I had the photos ready I downloaded and installed the EchoLink software on my Asus laptop.  I went through the initial configuration for my license and tried the server connection test.  As with Butch’s installation, two of the four UDP port tests failed.  I ignored that for the moment and went ahead with the validation procedure for my ham license.

Anyone can download and install the EchoLink software but only licensed hams can legally use it.  That is because it can, and often does, connect a computer to a ham radio repeater that is “on the air” and only licensed hams are allowed to transmit on those frequencies.  Validation was a multi-step process.  When first starting EchoLink I had to supply my FCC callsign, name, and (base station) location.  That information was transmitted to a database on the EchoLink servers but the EchoLink organization needed to validate that I was actually the person to whom that callsign was issued.  Through a separate process on the EchoLink.org website I had to upload JPEG image files of the front and back of my wallet license.  Once someone examined the images and made sure the call was active in the FCC database they “flipped the switch” on the server side and I was finally able to connect to stations if I wanted to.  I repeated the process later for Linda’s license.

While I was waiting to have my license validated I started trying to figure out how to get the EchoLink program to connect successfully to the EchoLink servers.  When the communications test with the servers runs it identifies the IP address assigned to the computer.  I went into the WiFiRanger Mobile and enabled UDB port forwarding for ports 5198 and 5199.  The TCP test was successful so I did not set up TCP port forwarding for port 5200.  Enabling port forwarding, however, was necessary but not sufficient.

What I ended up doing was switching the operating mode on the ESET Smart Security program from “Automatic” to “Interactive.”  With that change, the program would pop up a message box every time another program had outbound or inbound traffic through a port and ask if I wanted to allow the communication and optionally create a rule for it.  Several of those messages had to do with EchoLink and after clicking “Allow” to all of them the server/router tests were finally all successful and the program was fully functional except for the license validation.

Sometime in the late afternoon another motorhome showed up and backed in to the property with Jim L.’s help.  It was Larry and Sandy, who normally stay at Jim L.’s RV Park near the QIA.  Jim’s park is full so he put them over here in the spot by the laundry where Jack and Maria parked for a couple of nights a week or so ago.

We had leftover red lentil potato curry (thick soup) for dinner with the rest of the garlic naan and a glass of sangria and it was very good, again.  I finished up my FMCA education committee task and e-mailed it off.  I received an e-mail that my ham license had been validated so we played with the EchoLink program and User’s Guide for a while but did not try to connect to any stations.

While I was working on all of this I noticed that nine updates were pending for Windows 8.1 and there were four optional ones as well.  Installing updates is often an iterative process and so it was again this evening.  One of the optional updates was a roll up from November 2014 that was 723.9 MB.  That’s a big update.  I started downloading it at 23:52 MST and then went to bed.  My hope was that fewer people would be trying to use the local DSL system to get online at that hour and the update might actually load and install successfully.  But I would have to wait until tomorrow morning to find out.

L-to-R: Travis & Melanie Carr from the Escapees RV Club and Cherie Ve Ard & Chris Dunphy of Technomadia.

L-to-R: Travis & Melanie Carr from the Escapees RV Club and Cherie Ve Ard & Chris Dunphy of Technomadia.

2015/01/14 (W) SKP Happy Hour

As soon as I got up this morning I checked the huge Windows 8.1 optional rollup update that I started last night.  It had completed successfully except for restarting the computer, so that’s what I did.  While the update finished installing I made coffee and got the juice ready and Linda prepared our cereal.

Once the update finished I checked e-mail and websites.  Linda made white bean hummus to take to the SKP Happy Hour later today.  She then remembered that the Farmers Market at Desert Gardens was this morning from 8 AM to noon so we drove over there.  There was only one stand selling produce, but they were from Blythe, California only (20 miles away) so the produce was very local and very fresh.  Linda bought an assortment of veggies and a grapefruit.

We had parked at the south end of the western parking area and from there we could see a road going back towards “Q” Mountain and a well-defined trail going up the western side.  We drove back there and determined that we could park there when we decide to climb the mountain and do some panoramic photography.

We drove to Barry’s Breads and bought a loaf of Barry’s Basic Bread and then continued east on Kuehn Street to confirm Lloyd DeGerald’s location.  We took Riggles Avenue back over I-10 to Main Street and headed back towards Central Avenue, stopping at the Road Runner Market for a few things.  When we got back Jim and Barb were aggressively trimming the Palo Verde trees in the cactus garden.

As we often do most mornings, Linda went for a walk and I worked at my computer, installing three more optional updates and taking care of some e-mail.  We gathered up chairs, food, and beverages at 12:45 PM and drove over to the SKP Happy Hour on East Dome Rock Road.  There was already quite a crowd when we arrived and everyone was in a good mood.  And why not.  The sun was shining, the air temperature was pleasant, there were tables arrayed with food, people had beverages of their choice, Johnny Cockrum was performing, and lots of folks were meeting old and new friends.  We had a thoroughly pleasant time, but we always do when we are with groups of Escapees.

On the way back to camp we spotted Lloyd DeGerald and his wife out walking their dog and stopped briefly to chat about our Aqua-Hot.  We then stopped at the trailer for the Two Crazy Ladies and ordered engraved hang tags with our call signs and a sign asking emergency responders to rescue our cats.

When we got back to camp Linda went for another (short) walk and I sat down to work at my computer.  We lost our Internet connection while we were away and the DSL gateway would not re-associate with our WiFiRanger Mobile so I had Barb open the house and I power cycled the gateway.  I was then able reestablish the connection to our WFR-M.  That is the second time this has happened since we arrived here but so far has not caused us any real difficulty.

Butch has been having problems with their Progressive Industries EMS cutting off their shorepower due to high voltage.  We noticed during dinner that our PI-EMS was also showing a PE-3 (previous error – high voltage).  I do not know if our Magnum inverter switches on “instantly” when outside power is lost or if there is a delay but I am now wondering if we lost our Internet connection due to loss of power to the WiFi Ranger Mobile after which it was not able to reconnect with the gateway.  The next time this happens I may try powering the WFR-M off for 60 seconds and restarting it.  It’s also possible that the high voltage is wreaking havoc on the DSL gateway.

After dinner I sent a TXT message to Gary at BCM inquiring if he had arrived in Q as planned.  He called back and said they had just cleared Indio, California.  I suggested they find someplace to stop and rest and finish the trip tomorrow morning in the daylight.  They are headed to the Quartzsite Market Place dry camp area for the Eagles International bus gathering.  I spent the rest of the evening working on five different articles for Bus Conversion Magazine before finally turning in around midnight.

 

2015/01/01-07 (R-W) Q 2015 W1

2015/01/01 (R) Hola 2015

The salt restraining tube for the water filter housing.  The slotted end (R) goes down and the o-rings sit in the other end.

The salt restraining tube for the water filter housing. The slotted end (R) goes down and the o-rings sit in the other end.

Having stayed up later than usual last night to see the old year out and welcome the new year in we were in no hurry to get up this morning, especially given that the temperature outside was in the upper 20s.  But Linda said she would make her yummy vegan cinnamon rolls for breakfast so I felt obligated to get up and eat them.  Besides, it’s my job to make the coffee.  The rolls took quite a while to make and we ended up having them for brunch, but they were worth the wait.

I spent much of the morning looking for new games in the iStore.  I downloaded a dozen free ones and then started trying them in turn.  Most of them immediately tried to sell me a full version or ran a full-screen advertisement each time I tried to start a new round of play.  If they did that I immediately deleted the app.  I cannot imagine what makes a game developer think someone with tolerate that more than once.  At some point I realized that my AppleID was still associated with an old e-mail address so I initiated the process of changing it.  The process was not as seamless as I thought it could/would/should be, but I eventually got it sorted out.  Or as they say or Doc Martin, “sorted.”  As it turned out my credit card information was also out of date so I updated that as well.  Obviously I do not make iStore purchases very often.

I needed to regenerate our portable water softener even though it was 48 degrees F outside in the shade.  It was, however, comfortable enough in the sun to be able to work.  I started at noon cutting the plastic drain pipe that I bought at Herb’s Hardware the other day to a length of 10″ which is the length of a standard water filter.  I cut eight 3/8″ slots in the bottom end of the tube and got an O-ring from Butch to fit in the swaged upper end.  The purpose of the tube is to hold salt so that incoming water is required to pass through it to get to the softener but the salt crystals cannot actually wash into the softener.

Linda helped me transfer the contents of a 40 pound bag of solar salt to several two-gallon zip lock bags.  I then put a small quantity of salt in a one-quart zip lock bag and gently smashed it with a two-pound sledgehammer, although as I write that it seems to be something of an oxymoron.  I inserted the tube into the removable filter housing, slotted side down, and poured the salt around the outside of the tube.  I smashed a second bag of salt and added it to the housing.  I put the housing back on the filter head and slowly ran water through the softener for almost two hours.  I got a water hardness test strip from Butch and tested the output of the softener.  It was still showing 7 grains of hardness, exactly the same as two days ago.  It appeared that the regeneration process had not had any effect.  Bummer.

I discussed the situation with Butch and he suggested I back flush the softener.  To do that I needed a hose with female hose fittings on each end.  This is the kind of hose used to hook up a washing machine but neither one of us had one with us.  Butch, however, had a female-female adapter which allowed me to connect a male hose end to a male fitting on the outlet of the water softener.  (Backflushing literally means running water through the softener in the reverse direction to flush out any debris that may after gotten in through the normal inlet.)

The salt retaining tube in the filter housing with salt around the bottom outside and the o-ring visible at the top.

The salt retaining tube in the filter housing with salt around the bottom outside and the o-ring visible at the top.

After backflushing the softener I tried regenerating it again.  This time I used a 26 ounces of fine grain non-iodized table salt.  With my homemade diverter tube still in place I added the salt around the outside and screwed the housing back on.  I let the salt sit in the housing for 20 minutes to start to make a brine and then ran water through the softener until I got a very salty taste at the output.  I then shut the outlet valve and let it sit for 20 minutes.  When the time elapsed I ran water through the softener for another 15 seconds, checked it for saltiness, and shut the outlet valve.  At the end of another 20 minutes I ran water through it at a very slow rate for 20 minutes and then checked it again for salty taste.  It was still slightly salty and as it was getting close to sunset I decided to let it sit overnight.  I will finish flushing it tomorrow and check the hardness again.

While I was fussing with our water softener Butch recharged theirs in about 30 minutes.  When he tested the water at the end it indicated zero (0) grains of hardness; completely softened.  Their softener is different from ours and the regeneration procedure is very straightforward and apparently works.  For now I need to figure out a guaranteed procedure for regenerating ours, but long-term I need to figure out some other arrangement of just get a different softener.

The arrangement I am considering would be in conjunction with redoing the water bay. With a different arrangement of tanks I could create space in the bay for the softener, multiple filter housings, and associated plumbing.  I could set up an arrangement that would divert the incoming water (after the first/sediment filter) through a clear filter housing into which I could put the salt.  That clear housing/head would be permanently modified to force water through the salt and allow me to see when the salt was gone.  It would also eliminate the need to remove and reinstall the filter the way I have to now.  Alternatively I could put a tank between the filter housing and the softener (instead of the clear housing) and use it as a brine tank.  If the tank was big enough to hold a 40 pound bag of solar salt it would work just like a home softening system.  Water would sit in the tank with the salt for days so that the brine was ready to use when it was time to regenerate the softener.  I could even rig up a separate pump just for pumping the brine into the softener.  I’m going to give this a lot of thought before I start changing things around, but last winter in Florida and this winter in Quartzsite have made it very clear that hard water is a problem and we need a very effective and efficient way to deal with it.

While I worked with the water softener Linda began preparing a Tex-Mex bean soup for dinner and then went for a long walk.  She finished making the soup when she got back while I took a short nap.  It cooled off quickly as the sun set and nothing is quite as satisfying on a cool evening as hearty, hot soup.  It also had a bit of red pepper heat which was a nice bonus.  It was really good soup.

I had a few e-mails from Gary at BCM and a nice follow-up e-mail from Kathy at the Michigan Assessment Consortium.  She attached a copy of their holiday letter so I attached a copy of ours in reply.  I spent a little time browsing websites for OTA TV antennas and turbo boost gauges and finally went to bed without resolving what to do about either thing.  I have a lot of nights that end like that.

2015/01/02 (F) Crazy Days In Q

Contact is established with our cat, Jasper.

Contact is established with our cat, Jasper.

The “show” at Desert Gardens officially opened yesterday and runs through the end of February, so Quartzsite is quickly be transformed into a crazy place.  We were chatting with Butch, Fonda, Jim, and Barb after breakfast and Barb reminded us that starting now driving and parking “downtown”, and especially along Kuehn Street south of I-10, during the day will be difficult to impossible.  She offered to drive us down in the golf cart and come pick us up if we did not want to walk.  She also told us that many vendors will hold purchases for pickup at the end of the day.  We exchanged cell phone numbers, which we had not yet done since they arrived.  She suggested that if we wanted to eat out we should go early or right before closing as we might not be able to get seated/served otherwise.  There’s no doubt that we have lucked out on our arrangements this winter, and the situation just keeps getting better.

Linda was browsing on her iPad and discovered an all vegan grocery store in Rancho Cucamonga, California; the largest all-vegan grocery store in the world.  I looked up Rancho Cucamonga on Google Maps and it is located about half way between Los Angeles and San Bernardino.  Based on the speeds I like to drive (often just below the speed limit or 68 MPH, whichever is less) it looks like a four hour drive one-way from Q.  That’s obviously too far for a regular grocery run, but we might make a day trip in that direction sometime this winter and find the store while we are over there.

One of the things I did after climbing in bed last night was spend a little time looking at the Sure Marine Service website.  SMS is a major supplier of repair parts for Webasto diesel-fired hydronic systems headquartered in Seattle, Washington.  After studying their parts diagrams I became unclear (and concerned) as to whether the burner we removed from Butch’s old unit was a DBW2010 or a DBW2020.  They are very similar but not identical.  I am almost certain that our original burner is a DBW2010, but our AHU-xxx Aqua-Hot is so old that the model number is no longer referenced on the website and model specific documentation, like a service manual, is not available for download.

The reason I was looking at the parts diagrams was to identify the bearing kit for the blower as I wanted to order two of them today.  What I could tell from the website was that the 2020 is a higher BTU output burner and so one of the differences is that the 2010 uses a 0.35 GPH nozzle while the 2020 uses a 0.60 GPH nozzle.  That alone might account for why we seem to have poor combustion, although even money is still on bad bearings.  The unresolved issues and the inability to investigate at midnight did not make for a good night’s sleep.

I have the Aqua-Hot service/repair manual for the unit I bought from Butch, both on paper and on my iPad, so I spent some time this morning looking at the iPad version.  I could not tell if they used the same bearing parts so I did not order anything today and won’t until I can determine model numbers.  I asked Butch if he knew which burner was in the Aqua-Hot I bought from him, but he did not.  The service manual shows a Webasto label that identifies the burner model, but does not show where the label is located.  More investigation was needed.

After I got dressed I e-mailed Bill Gerrie (RetiredBusNut) in Ontario, Canada with questions about gauges and sending units for our bus engine and transmission.  I then started dealing with the water softener.  Linda returned from her walk and started preparing lunch, so I emptied the filter housing of the little bit of salt that was still in the bottom, rinsed it clean, re-installed the filter, and let it run for 20 minutes to fully flush out any residual salt water.

Linda made a warm garbanzo bean and kale salad for lunch with lemon juice and garlic.  It was the first time she had tried this recipe and we both agreed it was a keeper. After lunch I tested the hardness of the water coming out of the softener and it registered on the test strip between zero (completely soft) and 1.5 (definitely soft) so I dumped the remaining (hard) water in the fresh water tank and refilled it with 120 gallons of nice, soft water.  After the tank was full I retested the water coming out of the softener and got the same reading as before.  Finally, some good news on the water softener front.

With water softening taken care of (for now) I did an online search for a panoramic camera tripod head.  I really like shooting panoramas and the Microsoft Image Composite Editor (MS-ICE) does a remarkable job stitching images together.  Most of my panoramas have been handheld, which makes the performance of MS-ICE all the more impressive.  I have shot a few panoramas using a tripod but without a nodal point (spherical) pan head, so that is what I was searching for online.  B&H Photo had a Manfrotto on sale for $280, marked down from $600, but their order desk was closing for the day and I did not want to be rushed making this decision so I did not order it.  They will reopen tomorrow, so I will think about it overnight and do some more research.

I got our old Webasto burner out of the front bay and found the label.  It is, indeed, a DBW2010, specifically a DBW2010.75 with a 0.35 GPH nozzle rated at 45,000 BTU.  Linda recorded the details, including the serial number, and then helped me rewrap it in bubble wrap so I could put back in its storage pail.

Linda then went to Parker, Arizona with Butch and Fonda to check out the Safeway grocery store and look for some things at Walmart.  The Parker Safeway was supposed to carry Daiya vegan cheese products but they were nowhere to be found.  It appears that our closest source will be Whole Foods.  There are five of them in the greater Phoenix area but that is a two hour drive one way.

While the three amigos were gone I removed the cover from the Aqua-Hot in our coach and found its label.  Much to my relief it is also a Webasto DBW2010.75, 45,000 BTU.  It should also have a 0.35 GPH nozzle, and probably does, but I did not pull the burner out to check.  I noticed some soot on the final fuel filter inside the housing and in other places so that gave me something new to be concerned about.  I was pondering the situation when Jim and Barb and Roho came over to visit and we had a good long chat.  When they went back to their motorhome I put the cover back on the Aqua-Hot and put all of my tools away.

My plan for tomorrow is to turn the Aqua-Hot off, let it cool down, and pull the burner to check the nozzle.  It’s possible, though not likely, that I do not have the burner seated quite right and there’s a chance, though very small, that reinstalling it will fix, or least improve the performance.  My money (literally) is still on the blower bearings.  Hopefully it does not also need a new motor as everything on a Webasto is more expensive than seems reasonable. It’s another fine example of precision German engineering and manufacturing.

Even though I have quite a few e-mail addresses that I use to segregate electronic correspondence into manageable categories my inboxes still end up flooded with e-mails.  Very few of them are spam—we have good spam filtering on all of the accounts—but some of the highest volume inbound traffic is notifications of things like failed login attempts on WordPress websites.  Those e-mails do not get replies and often do not require any specific action on my part, but they sometimes obscure the presence of other e-mails that do require my attention.

Microsoft Outlook is able to deal with incoming (and outgoing) e-mails based on user-defined “rules” but I had never played with that feature until today.  I used the online help system to read about the whys and wherefores of e-mail rules and then tried creating some.  Once I understood what I was trying to accomplish it was mostly point and click to get it done, with a little typing thrown in.  What I ended up doing was creating sender/subject subfolders under the inbox of certain accounts and then creating a rule for each subfolder that directs incoming e-mails matching the criteria to the correct folder.  By keeping the sub folders under the inbox folder it will be clear to me that these are e-mails that I have received but not yet dealt with.

For dinner Linda made a cooked shredded Brussels’ Sprouts dish with tomatoes, dried cranberries, and pistachios and served it alongside the leftover Mexican rice with a glass of sangria.  Ole!  We agreed that both of these dishes were keepers and went well with the fruity wine.  The rest of the evening was quiet.  Linda read and played her online games while I finished up working on this post.  I finally went to bed and started reading the service and repair manuals for the Aqua-Hot system and the Webasto burner.  According to the long-term weather forecast tonight should be our last night with an overnight low temperature below freezing.

 

A few of the vendors at Desert Gardens, Quartzsite, AZ.

A few of the vendors at Desert Gardens, Quartzsite, AZ.

2015/01/03 (S) Hammer Stahl

I got up at 6:30 AM today.  I had been awake for a while before that and had some things I needed/wanted to do on my computer.  These were quiet tasks that I could do in the front of the coach, with the heat turned up, without disturbing Linda.

I always check my e-mail first.  There was a group message from Hillary at RVillage to all of the Ambassadors regarding a new feature they will be rolling out soon and seeking our assistance.  I mentioned this to Linda when she got up and we watched the two YouTube videos.  We did not have time today but will work on it tomorrow in advance of a 5 PM (4 PM PST) web meeting.

My first project today was updating the spreadsheet I maintain for our FMCA Freethinkers Chapter, which I started working on last night.  The chapter treasurer maintains our checking account but as the secretary I maintain the records including the roster and who has paid their dues for what years.  Because I have all of those details I also generate the quarterly and annual financial statements.  I entered the information for dues payments that had been received between November 1 and December 31.  I then added the five worksheets for 2015 (four quarters and year), which tie together and link back to the 2014 statement, and updated the cumulative financial statement.

Linda got up so I put my work aside to make coffee while she made breakfast.  We had a few bananas that were ripe so she made green smoothies for breakfast.  We happen to like kale but if we didn’t, green smoothies would be an excellent way to get our daily dose along with several other healthy ingredients.

We talked about visiting the market area today and decided to go later when it was a bit warmer.  The temperature a 9AM was still only 40 degrees F so Linda bundled up and went for her morning walk while I continued to work on my spreadsheet.

Once I finished the spreadsheet I worked outside for a bit.  I removed the cover from the burner end of the Aqua-Hot while it was running to check for an exhaust leak (sight, smell, touch) but I could not detect one.  When the cycle finished I turned the burner off.  My plan was to let the unit cool off and then remove the burner to check the nozzle size and do a general inspection of the combustion chamber and visible parts, but that did not happen today.

What I did instead was return to my computer and start putting Webasto repair parts in my shopping cart on the Sure Marine Service website.  The bearings on the installed burner are definitely whining and need to be replaced.  They are supposed to be replaced regularly anyway, so I put two sets in the cart.  It is very likely that they are causing the motor to run slow which means insufficient combustion air, and possibly lower fuel pressure, leading to the dark smoky exhaust.  I also put a fuel solenoid valve in the cart.  There is a good chance that the valve and/or the solenoid are not working on the other burner.  There’s also a chance that the ignition coil has failed, but the solenoid valve costs 1/2 as much as the coil, so I’m hoping it’s the valve.  I got the order submitted with UPS ground shipping and used PayPal to make the payment.

Once I completed the SMS order I loaded the B&H Photo app onto my iPad and spent quite a bit of time going between their website and the Sony online store trying to figure out if I should order a panoramic tripod head and/or new camera, possibly with a lens and flash unit.  Sony has the Alpha 99 FF body marked down from $2,800 to $1,900 with the vertical grip and an extra battery thrown into the deal, an additional $500+ value.  They will also bundle in the SAM 28-75mm f/2.8 lens for $400.  The lens by itself is normally $900, so that’s another $500 savings.

So for $2,500 I could get $4,200 worth of Sony’s top-of-the-line “flagship” DSLR (DSLT, actually) equipment, except for one thing; it was all on back order with an ESTIMATED ship date of February 4, 2015.  That’s my birthday, so if it actually shipped on that date it would be quite the birthday present, but if it was delayed very much there would be the very real possibility of it arriving at our location in Q after we had left.  Not good.

So what about B&H Photo?  It turns out that they (claim to) have all of these pieces in stock and they are selling the body with the added pieces for the same price as Sony, but they are not offering the lens at the bundled price.  That was the deal breaker that saved me spending a lot of money today.  Besides, I have been waiting a long time for Sony to officially announce and the ship the new (rumored) flagship alpha a99-II with its 36MP FF 35mm sensor and long list of awesome features.  To decide now to by prior generation technology it would have to be a very attractive deal, much better than what I was seeing online.

I ended up ordering a Manfrotto Nodal Point Pro panoramic tripod mount from B&H.  It should be here by the end of the week.  When it arrives I think we will hike up to the top of “Q Mountain” and try to capture the true essence of Quartzsite in the winter, which is RVs from horizon to horizon.

We headed down to the market area on Kuehn Street with Butch and Fonda and walked around for a couple of hours in the Tyson Wells Show grounds north of Kuehn Street and west of Central Avenue (US-95).  This particular market area had really filled up with vendors in the last few days.  Linda bought a nice white apron and really nice Hammer Stahl 5.5″ Santoku knife.  She checked online when we got back and she paid about 55% of the MSRP on the HS website.  She bought it from Cutlery by LeClaire, which also has a website, and has it on sale for $20 more than the price on the HS website, marked down $20 from their “regular” price.  The point is, she got it for what appears to be a good price of $59 and it came in a nice box with a ceramic sharpener thrown into the deal.

We drove farther west on Kuehn Street and pulled into the Desert Gardens show grounds.  It was getting near sunset, so we did not stay long, but Linda and I walked enough of it to get a feeling for the place.  It was a “rougher” setup than Tyson Wells and many of the booths were selling large, rough rocks and gemstones.  The vendors also had a lot more equipment set up and were using it to process materials.  We’ll be back, probably more than once, and earlier in the day so we can spend more time.

When we got back to our motorcoaches Fonda came over and worked with Linda for a little while on their business records.  We then had a nice salad and some of the spicy bean and pasta soup (that Linda made the other day) with crackers and sangria.  I spent more time after dinner researching stuff on my iPad and working on this post.

We appear to be in one of the few places in the country that is not getting clobbered by bad weather. The temperature is not even supposed to drop below freezing overnight. It will still be cool tomorrow, however, and we did make specific plans before going to bed.

 

A view of "Q" Mountain from the Desert Gardens Show area.

A view of “Q” Mountain from the Desert Gardens Show area.

2015/01/04 (N) Our Village

We had vegan pancakes for breakfast which prompted me to suggest that Linda invent some recipes, even if they are interesting and successful variations on existing ones, and feed them to our grand-daughter.  Linda could put them on our website using the WP Ultimate Recipe plug-in and, if they met with her approval, name they after “Bitty” (youngest grand-daughter’s latest nickname, although I think I will always prefer “Schmoo”).  Perhaps Pancakes Madeline; Sautéed greens a la Madeline; Pasta Madeline; or Madeline’s vegan mac and cheese.  Being retired gives me a lot of time to think.

Joe’s brother, Jim L., finally returned from Nevada today and was able to get the park model trailer unlocked.  Barb has been wanting to get in and clean it since she and Jim (different Jim) arrived.  Barb is a keep busy kind of gal.  She is responsible for maintaining the apartment and laundry room while she is here and told Connie she would also do some deep cleaning on their house trailer, so it’s been bugging her that she could not get in to do it.  As for my part, all I did was lock the door on the trailer the way Connie asked me to.  Barb and Jim (husband) had lots of keys but could not get any of them to work.

 

Today was shower day.  This is always more of a production than we would like because we keep the cats’ litter tray in the shower.  Most of the time that works really well—it is out of the way and contains any mess they might make—but it is inconvenient when we want to use the shower for its intended purpose.  Besides pulling the tray out into the hall by the bathroom door we have to clean up any stray litter in the shower to make sure it does not end up in the gray water waste tank.  Litter tray or not we still have to spray the shower walls when we are done, squeegee off the glass door, let everything dry, and then reassemble it as a giant cat litter box.  But it works and it’s one of the compromises we willingly make to live with our cats in so few square feet.

 

Once I was dressed I went outside to chat with Jim L. (Joe’s brother) and we discussed the possibility of upgrading the electrical service at our site to “50 Amp” (240VAC, 50A, 4-wire, the equivalent of a 120VAC, 100A residential service).  It’s not an issue for us right now as the cool weather has us burning diesel fuel to make space heat, but once the weather turns warm we may need our air-conditioners.  We have three but can only run one on a “30A” service and still have enough power to run other things.  A 30A service is just what it says; 30A of current at 120VAC.  A “50A” RV service is slightly more than three times that amount of power.

 

The electrical hookups here are very interesting.  Perhaps all RV park power pedestals work the same way, but I have never looked inside one so I don’t know.  The meter is at the top and the area below it has a top-hinged cover.  Under the cover are three panels about 3″ wide and 15″ tall.  The panels have an outlet towards the bottom and a circuit breaker near the midpoint.  Behind the panels are busses for the hot, neutral and ground with male blade connectors.  The panels have female blade connectors that engage their male counterparts when the panel is slipped and then hinged into place.  It is secured with a single screw.  If Jim L. can find a 50A panel all we will have to do is unscrew and remove the 30A panel and plug in the new one, once we verify that 240 VAC (L1& L2) are present in the box and wired to the distribution busses.

 

Instead of her usual morning walk Linda setup her laptop on the dinette table and worked on accounting and tax issues for Butch and Fonda.  I set my laptop there as well to work on the roster for our FMCA Freethinkers Chapter and Jasper got in between us, so we had a nice, cozy computing session.  When I placed my order with B&H Photo yesterday I checked a box to receive shipping status information via TXT message.  I got one this morning letting me know that my package had shipped from NYC.  Cool.

 

With accounting chores done for now Linda prepared vegan hot dogs with mustard, onion, and relish for lunch.  She then went for a long walk while I stayed at the coach and worked with a new feature on the RVillage website.  I was posting a lot of suggestions to the topic thread on the Ambassador forum and got a phone call from Curtis, the founder/CEO of RVillage.   We had a long chat and I was still on the phone with him when Linda got back.  I worked with the website some more and at 5:00 PM we connected to an Ambassador meeting using GoToMeeting on my computer.  This is a very exciting new feature and I think RVillagers and RV-related businesses are really going to like it once they know about it and see how it works.

 

Linda made mock (vegan) stroganoff for dinner.  She normally uses Basmati but the only rice she had enough of was Texmati so she used that.  Although I did not care for the texture of the Texmati in this dish (a bit crunchy), the taste was still very good.  This dish requires real cooking, which means it makes a real mess.  By the time everything was cleaned up and put away it was 8 PM and we were both tired.  I continued to research engine and transmission gauges while Linda read and played word games.  I also revisited the SonyAlphaRumors website but there was absolutely NO new information on the a99-II.  I went to bed wondering if this camera will ever actually exist.  Based on the comments I see online I am not the only one wondering if this camera will ever be a reality.

One of the hundreds of vendors at the Tyson Wells market area in Q.

One of the hundreds of vendors at the Tyson Wells market area in Q.

 

2015/01/05 (M) VSWR 1.0

Yesterday we finished up the coffees we have been using since we left Michigan at the end of November so this morning I had to open new bags and transfer the contents from their vacuum sealed bags to our metal storage canisters.  I had Teeko’s roast Ethiopian Yirgacheffe regular and decaffeinated separately, so I opened 1/2 pound bags of each.  I also opened a 1/2 pound bag of our special Sweet Seattle Dreams, which is 1/2 Sweet Dreams (decaf) and 1/2 Seattle Blend (regular).  I then made a pot of Ethiopian Yirgacheffe 1/2-n-1/2 while Linda prepared our granola with fresh bananas and fresh blueberries.

 

Linda went for her morning walk while I continued to do online research regarding the enigma known as the Sony a99-II DSLT camera and the supposedly discontinued, but apparently still very much available, Sony alpha a99.  If I did not already have a nice assortment of compatible Minolta A-mount lenses and flash equipment I think I would stop wasting my time with Sony cameras.  But I do, and so I continue to wait and be frustrated along with thousands of other “enthusiast” (sub-professional) photographers.  Because Sony builds the image stabilization (anti-shake) feature into the alpha bodies instead of the A-mount lenses the feature is available even with older Minolta lenses and the new lenses are slightly less complicated and less expensive than the Nikon and Canon lenses, which have the image stabilization built into each lens.  I think this was one of Sony’s best innovations.

 

I also continued to look at automotive gauges and sending units and decided to call Bill Gerrie (in Ontario, Canada) to follow up on his reply to an e-mail I sent a few days ago.  We had a great chat and he was able to clarify some things and add quite a bit of specificity to his written reply.  As a result I have a pretty good idea of what I am looking for; now it’s just a matter of finding it and deciding to place the order.

 

I was starting to work at my computer when Linda returned from her walk.  She eventually fixed a couple of vegan hot dogs wrapped up in tortillas with mustard, onions, and relish.   As I was finishing my meal I got a call from Gary Hatt at BCM.  He recently acquired an Eagle bus conversion and had some questions about the air-conditioners and the Aqua-Hot.  He plans to be in Quartzsite next to week and we are looking forward to finally meeting in person since I have been writing articles for the magazine for almost two years.

 

Linda has been having a problem with the brightness (or lack thereof) of the touch screen on her 19 month old Windows 8.1 Samsung laptop.  It will go very dim for no apparent reason and cannot be adjusted.  There was a driver update available for the Intel HD Graphics processor so we downloaded it, installed it, and re-started her computer.  The screen was now bright, which was more useful than dim, but still not adjustable.  That could be a coincidence or a fix, we will have to wait and see.  Even though it was working (for now) I drove to the local Family Dollar and bought an HDMI cable and some lightly carbonated water.  (The water had nothing to do with Linda’s laptop computer display, we were just low on sparkling water.)  The cable will allow us to connect her computer to one of our two flat panel LCD (LED) TV/monitors if needed.  (We did that after dinner and it worked, mirroring the built-in display to the monitor and setting the resolution to match the monitor’s 1900x1080p native mode.  But it also caused the built-in monitor to dim, although not as much as before.  When we turned off the monitor and unplugged it the built-in display did not return to full brightness.)

 

Mid-afternoon I saw Butch working on his Tarheel screwdriver antenna so I inquired as to what he was doing.  He had connected his MFJ VSWR meter to it through a six foot length of coax.  He had also unplugged the control harness for the tuning motor and rigged up a temporary switch to extend and retract the antenna.  He had done this because he was getting meter readings when connected through the installed coax that indicated the antenna was not resonant at any frequency or that the meter was not working correctly.  I climbed up on his ladder to have a look and saw VSWRs that were often greater than 31:1, and never fell below 10:1, with complex impedances that were rarely 50 ohms and with both resistance and reactance values that were all over the place.  Clearly something was not right.  It was not his installed coax and I was fairly certain I was not his meter, which I had used back at their house to check the VSWR on his CB and 2m ham antennas.

 

I climbed onto the roof of their bus so it would be easier to reach things and I could work sitting down.  We tried adding a ground strap as a counterpoise but it didn’t help.  Butch then grounded the strap to the chassis at the motor but that did not help either.  Our concern was that the antenna was not sufficiently bonded (grounded) to the roof but nothing we tried made any difference.  I decided to set the antenna to its shortest length (highest operating frequency), set the meter to a lower frequency, and then slowly lengthen the antenna, thereby lowering the operating frequency, while looking for some sort of response on the meter.

 

I got no change on the meter and finally realized that the antenna (via the meter) was behaving as though it was not grounded.  I noticed what looked like a thick washer between the SO-239 antenna connector and the base mounting plate of the antenna.  The mounting plate is the ground reference for the antenna and is connected to the base of the antenna through a coil of insulated wire (an inductor) known as a base loading coil.  The spacer was a plastic insulator that was, indeed, preventing the case of the SO-239 antenna socket from making contact with the mounting plate.  As a result the antenna was not grounded through the coax cable shield, preventing the meter from obtaining meaningful readings.

 

We removed the antenna connector, removed the insulated spacer, reassembled the connector to the antenna, reattached the coax and meter, and took additional measurements.  This time we got excellent readings that made very good sense.  We checked the upper bound, lower bound, and the midpoint of most of the high frequency (HF) ham bands and were always able to obtain VSWRs of 1.3:1 or less, which was excellent.  Butch had been considering redoing the mounting of the large motorized fold-over base so it was a good thing we figured this out as it saved him a lot of unnecessary work.  If I can solve one problem without creating others I figure it’s a good day.  BTW:  VSWR stands for Voltage Standing Wave Ratio and 1.0 is not a beta version, it is shorthand for a ratio of one-to-one (1:1), which is the best SWR you can have.  Anything below 1.5:1 is considered excellent, below 2.0:1 good, and below 3.0:1 usable if that’s the best you can do.

 

Chayote is a fruit that is a member of the squash family and is related to other gourds such as melons and cucumbers.  Linda bought one last week when we went to Albertson’s grocery store in Blythe, California and decided to prepare it for dinner tonight.  She sliced it into long thin broad strips and sautéed them with onions, oregano, salt, and pepper.  She served it alongside the leftover mock (vegan) stroganoff with a glass of sangria.  Our wine friends can cringe all they want; we find the Vella and Franzia boxed wines generally agreeable and the sangrias go surprisingly well with a variety of dishes.  And it has me drinking red wine, so it’s healthy too!

 

We lost our WiFi connection this evening.  Not sure why.  The wireless gateway still shows up in the WFR list but won’t associate with the WFR.  Butch had the same problem at the same time so something obviously changed.  We will ask Barb to open the trailer tomorrow, or get Jim to do it if she is not comfortable, so we can reset the gateway.  Hopefully that will do the trick.

The sunsets in Quartzsite are amazing almost every night.  This shot was taken from our campsite in Q.

The sunsets in Quartzsite are amazing almost every night. This shot was taken from our campsite in Q.

 

2015/01/06 (T) You’ve Got Mail (Maybe)

 

Our mail situation here is interesting.  Remember that, per our Jamaican tour guide, we do not have problems, only situations, and situations are easier to deal with if I regard them as interesting rather than annoying.  With regards to receiving mail, the “situation” is as follows.  Although every structure in town has a street address—necessary for police, fire, EMS, trash collection, and other municipal services—the Quartzsite post office does not deliver mail to said locations.  They have an annex building on the northeast side of town that is nothing but P. O. boxes and all of the locals, and a lot of seasonal residents (including Joe and Connie, who own the property where we are staying) have a P. O. Box.

 

Where things get interesting is that the main post office and the street addresses are associated with one ZIP code but the P. O. boxes have a different ZIP code.  If something is coming to us via UPS or FEDEX we have to use the street address and associated ZIP code, but if it is being mailed to us USPS we have to use the P. O. Box number and associated ZIP code, or have it sent c/o General Delivery using the main ZIP code.  To confuse matters further, Joe and Connie had to return to Nevada because of Joe’s health and are having their Quartzsite mail forwarded back to their home, so we cannot have mail sent to us “care of” them as we originally planned as it just gets forwarded to Nevada.  Outbound mail does not appear to be a problem, but then why would it be?

 

The other situation that developed yesterday was that our WiFiRanger Mobile Ti disconnected from Joe and Connie’s WiFi (DSL) gateway and would not reconnect.  The WFR is telling us that the WPA password may be incorrect, but that is unlikely as we have been using it since we arrived last month, as have Butch and Fonda who also lost their connection yesterday and could not reestablish it.  The evidence suggests that the gateway needs to be reset.  Why?  Who knows?  DSL gremlins perhaps.  Or mischievous Internet fairies.  Or a problem with the local DSL service?  Or perhaps Butch keyed up his 600 Watt linear HF ham radio amplifier and blew out every wireless DSL router within a quarter mile?  Whatever the cause, once we can get Barb or (brother) Jim to open the trailer we will power cycle the gateway and see if that restores our ability to connect to it.

 

In the meantime, in order to get online last night and again this morning, we turned on our Verizon MiFi.  The Verizon signal here is strong and steady, and the data rate is much faster than the DSL/WiFi connection, but we only have a 4 GB data plan so we tend to use WiFi when available.  It is not always available, of course, especially while traveling (and especially if we are boondocking at Wally World or other such locations) and when it is available it is not always reliable or is so slow as to be useless.  This can be the situation, for instance, at larger RV rallies and even some RV parks.

 

So we logged into our Verizon Wireless account, looked at our current plan, and saw that for a mere $10 more per month we could increase our data plan from 4 GB to 10 GB.  The cost for exceeding your monthly data plan limit is $15/GB, so the extra $10/month was a no-brainer.  And VZW made it soooo easy to change our plan (once we were logged in); just click the data plan we want, review changes to our account, and click “Apply Changes.”  Done; they have our money and we have more data allocation.  Interestingly, they upped our data allocation immediately for the current billing cycle, which is Dec 20 – Jan 19, and added the $10 to the bill we will receive for that cycle.  No pro-rating going on here, but then we can use the whole 10 GB if we want/need to.

 

Interestingly the cost to go from 10 GB to 15 GB was an additional $20/month, so the 10 GB plan seems to be a sweet spot after which you pay a premium for additional access.  On the one hand Verizon wants to sell you data bandwidth but on the other hand there is a finite amount of data they can move through their network, so if you want to use a larger chunk of their capacity it figures that it would come with premium pricing.

 

Until a few months ago Millenicom was reselling 20 GB MiFi plans (on Verizon’s network) for $70.  It was the best deal around; a sufficient amount of data for the same price we were paying Verizon for only 4 GB.  Kind of unfair, when I think about it.  Well, Verizon decided to stop selling bulk capacity to Millenicom (and other MVNAs?), took all of the accounts in-house, and Millenicom went out of business.  Not really a big surprise when you think about it.  Verizon also notified those customers (as I understand the situation) of their “options” which were not, apparently, as attractive as the deal they had with Millenicom.  Not really a big surprise when you think about it.

 

Anyway, we will see how we do with 10 GB/month while we are on the road.  We can change back to our 4GB plan when we get home, but I doubt that we will, and we can increase it to 15, 20, or even more GB per billing cycle if we need to, but that is unlikely.  We have an AT&T landline at home with DSL service that provides an “always on” Internet connection (when it works).  It has a 150 GB/month data allowance and allows us to monitor and control our whole house generator and WiFi thermostat.  We have discussed adding a security system and a personal weather station linked in to Weather Underground’s Wundermap when we get home.  I don’t think our DSL connection is fast enough, however, that we could use 150 GB in a month if we tried.

 

Linda went for her morning walk and I made a quick run to Barry’s Breads.  Barry is a really nice older gentleman who has a small bakery stand on the north side of Kuehn Street east of Central Avenue.  Just behind the stand, however, is a larger trailer in which he bakes all of his products.  Those products include breads, rolls, savory items, and sweet goods.  Most of his products use butter, cream cheese, cheddar cheese, or ranch dressing, but his Basic Bread is just that, flour, water, sugar, salt, and yeast.  I have had some difficulty figuring out what time of day to stop by but this morning he finally had loaves of bread, and some hamburger buns made from the same recipe, so I bought a loaf and a pack of four buns.

 

When I got back I started working on another article for Bus Conversion Magazine.  A little over a year ago I installed an RV-Critter Guard to seal around the shorepower cord and water hose where they enter the utility bay through the floor.  I took a few pictures during the installation and have had the article on my “future” list ever since.  By the time Linda got back from her walk I had the article mostly finished and was starting to look at the photographs.

 

She had stopped at the Salvation Army store, which was open, to use their facilities and ended up buying a grocery bag full of clothes for $1.  Not $1/item, $1 for the entire bag.  Most of the items were tagged with color codes indicating prices of one or more dollars each but they had too much inventory and needed to move some product.  They told Linda that when that happens they have their $1 bag sale.  Deal.  She called Butch and Fonda to let them know and I think they headed there before going to check the post office box and then stop at the post office if needed.

 

Linda cooked a couple of our Boca vegan mock hamburger patties and served them with fresh sliced onion, lettuce, and pickles on two of the buns I had just purchased.  Not an entirely WFPB meal, but very few of our meals are.  Still, we try to get as much plant-based whole foods as we can every day.

 

Linda went for a second walk after lunch and headed down Central Avenue towards the Kuehn Street markets.  She is so fond of her 5.5″ Hammer Stahl Santoku knife that she wanted to buy the 3.5″ paring knife if Cutlery by LeClaire had it for sale as an individual item.

 

While Linda was gone I finished working on the photos for my RV-Critter Guard article.  When she returned from her walk she had both the Hammer Stahl 3.5″ Paring Knife AND the 3.0″ Birdsbeak Paring Knife.  As we learned the other day from an Alton Brown video paring is actually a technique in which food is held in one hand and a knife in the other; no cutting board is involved.  Paring knives are generally smaller with a shorter blade and most of the weight is in the handle, allowing very fine control of the cutting edge and tip.

 

The Birdsbeak is a particularly interesting and unusual knife.  The bottom/cutting edge is slightly concave rather than convex like the classic chef knife.  The bottom edge joins the top edge in a point with a shape that resembles certain types of curved bird beaks.  In use, the knife is often held stationary and the food is pressed or turned into it, such as decorative peeling, pitting of fruit, or slicing strawberries.  Linda is often reluctant to spend money on herself so I think it’s nice that she found something she wanted and made the decision to buy it.  Like any high quality tool it will make the work it is designed to do easier and more enjoyable.

 

While I was uploading my article to our Dropbox Linda went outside to sit.  Barb wandered over and I mentioned that the DSL wireless Internet gateway had quit working.  She let me in the trailer where I found it sitting on the dining room table.  I powered it off, waited 60 seconds, and powered it back on.  All of the status lights came back on in the expected sequence and I was once again able to connect our WiFiRanger Mobile Ti to it.  We ended up standing by their Country Coach Intrigue motorhome and having a long chat.

 

Butch and Fonda were gone for most of the afternoon so we only got to chat for a little while when they returned before the sun dropped behind the southwestern mountains and the temperature dropped along with it.  Linda and I talked about going out to dinner, which we have only done once since we got here, but she remembered that we had a FedEx package scheduled for delivery today and that it might arrive as late as 8 PM.  So we had leftover soup with crackers and sangria.  This was the third and final meal we got out of this pot of soup and it was good to the last drop.  It was a packaged mix but Linda thinks she can recreate it; getting the spices right will be the tricky part.

 

After dinner I read DSLR reviews on the Digital Photography Reviews website and continued to look at gauges and sending units for the bus.  Around 8:30 PM I was having trouble staying awake but by 9 PM I had gotten my second wind and decided to write another short article for BCM.  This one was on the failure of Butch and Fonda’s main engine air-compressor on the drive down, how he dealt with it on the road, and eventually ended up installing a rebuilt one here at our campsite in Quartzsite.  I had the article written by 11 PM and decided to work on the photos tomorrow.

Sunset envelopes our coach as Linda prepares dinner.

Sunset envelopes our coach as Linda prepares dinner.

 

2015/01/07 (W) Catch 22

 

My main pair of reading glasses broke yesterday; not the lenses or the frame, but one of the nose pads.  Well, not the actual pad, but the small plate and mounting loop, specifically the mounting loop.  I was cleaning them and the whole assembly fell out.  The loop was split and had opened up.  The loop was a very small and delicate piece of ductile metal so I squeezed it back into a circle.  I removed the very tiny retaining screw, reinserted the mounting loop, and put the screw back in.  I was able to do this using only the tools available on my Leatherman.  The repair did not hold and it fell out again last night.  This time a piece of the loop broke off so the only repair will be a new mounting pad if I can find one.  There is a Wal-Mart in Parker that probably has an optical shop but I don’t know how universal this mounting system is.

 

I checked the level of the floor and counter in the kitchen last night and the coach appears to have settled slightly on the driver side.  Not a lot, but enough that I can feel it and it registers on the level.  I generally have to start the main engine and build up full air pressure in order to level the coach but I thought today would be a good day to finally pull the portable air compressor out of the car and see if the leveling system will work without the main engine running.  As it turned out that did not happen today because we ended up driving to Parker, Arizona.

 

Our destination in Parker was the Wal-Mart.  The store did not have an optical department but we found an eyeglass repair kit in the pharmacy area with a pair of screw-in pads and a pair of snap-in pads.  They also had a repair kit with a tiny screwdriver, spare screws, and other parts.  Between the two kits I was able to install a new pad in the car to replace the broken one.  That saved us a trip the optical shop in town.

 

Parker sits on the Arizona side of the Colorado River which is the boundary with California.  We decided to drive across and then take CA-62 over to US-95, follow it south along the River back down to Blythe, and then take I-10 back to Quartzsite.  Butch called while we were in Parker to let us know that there was a Farmer’s market at Desert Gardens.  It operates on Wednesdays from 8 AM to noon so we did not make it back in time but resolved to go in future weeks.

 

I worked on my “roadside repair” article for BCM while Linda went for a walk.  Jim and Barb had gone to Blythe to buy a new faucet and Jim L. stopped by and helped Jim B. install it.  They borrowed a caulk gun from us (we carry two in the bay) but had to go buy caulk.  UPS showed up with yet another package for us, after which we had a long conversation about the inadequacies (incompetence) of the U. S. Post Office in Quartzsite.  (The UPS driver told me that both UPS and FedEx have extra drivers and trucks delivering into Quartzsite during the peak season.  What a novel idea.)

 

Back to the post office.  We are waiting for a shipment of two bottles of water hardness test strips that we ordered through Amazon but were shipped via USPS by a swimming pool supply company in Elkhart, Indiana.  I gave them the P. O. Box here in Q since the post office does not deliver mail to street addresses and it appears that they will likely get returned to the sender rather than delivered to us.  The root cause of the problem (and it is a problem) is that Joe and Connie are having their mail forwarded to their home in Nevada.  If their names are not on the mail the post office won’t put it in the box, but if their names are on the mail it still does not get put in the box, it gets sent to Nevada.  So as of now the box is sitting there but cannot be used; a genuine “catch 22.”

 

Fine, we will just use General Delivery.  The problem with that (and it is a problem) is that you can only pick up the GD Mail at the Quartzsite post office between 11AM and 1 PM, and there are untold numbers of people trying to do the same thing.  That means ridiculously long lines and ridiculously long waits.  Considering that the influx of seasonal “residents” to Quartzsite has been going on for over 30 years the postal “service” has had ample time to figure out how to handle the situation.  I mean, Amazon practically runs its holiday operations with seasonal employees, many of whom are RVers.  Gee, I wonder if there are any RVers around Quartzsite this time of year.  While the post office is trying to figure out how to not deliver our mail we have two more UPS shipments scheduled to arrive on Friday.

 

Linda made a zoodle dish for dinner.  She used her SpiraLife to turn a zucchini into long thin strips which she cut into 6″ lengths and then used like spaghetti in the dish.  The other ingredients were onions, garlic, mushrooms, asparagus, and green beans.  Everything got sautéed in a pan with a little olive oil, salt, and pepper.  We had a glass of Lamb’s Valley Organic Sweet White wine and it was a lovely meal.

 

After dinner I put the finishing touches on my BCM air-compressor repair article and e-mailed it to Butch to proof-read.  The only thing worse than writing an article that makes me look stupid is writing one that makes someone else look stupid, especially a friend.

 

I had an e-mail from Gary, the publisher of BCM, letting me know that the December 2014 issue was finally available online.  I downloaded both the SD and the HD versions.  I then clipped the cover from the SD version, pasted it into MS Paint, and saved it as a JPEG file.  I opened it in Faststone Image Viewer, resized it to a thumbnail, and sharpened it.  I then edited the BCM page on our website, adding the thumbnail image, the title of my article, and a brief description.  I have a similar entry on that page for every issue in which I gave had an article, starting with the February 2013 issue. The December 2014 article was my 14th in 23 months.

The last glow of this sunset reflects off the passenger side of our motorcoach in Quartzsite, AZ.

The last glow of this sunset reflects off the passenger side of our motorcoach in Quartzsite, AZ.

 

2014/12/26-31 (F-W) Wrapping Up 2014

Note: This post covers the last six days of 2014. It is long and there are no pictures.  Sorry.  🙁

2014/12/26 (F) Cool Letters

When we woke up at 7 AM the temperature was 41 degrees F but by 8:30 it had dropped to 35.  According to the Weather Channel app on our iPads we have a freeze warning posted for the overnight hours tonight (Saturday 0000-0800).  The 12-day forecast is for an extended period of cooler temperatures with highs in the 50s and lows in the 30s, including a few nights near freezing, but that is normal for Q at this time of year.  Desert regions are not always hot and actually experience an extreme range of temperatures.  The forecast back home has lows dropping into the teens with one night forecast at 13 degrees F.  Burrrrr.

Connie was apparently tracking the weather in Q as well, even though she and Joe are back in Nevada for most of the winter, as she called to ask me to turn the water off at the street if the temps got down to freezing.  The city water system here has supply pipes that come straight up out of the ground near the street, turn horizontal, go through a valve, then through a pressure regulator or small meter (not sure which or both), go through another valve, and then turn 90 degrees and go back down into the ground.  Joe and Connie keep all of this covered under a wooden box and we have noticed other properties doing the same thing, but not all.  Although the temperatures here can/do drop below freezing in December and January it is never for more than a few hours just before sunrise.

Presumably the city water lines are deep enough to avoid ever having freezing problems, but I do not know how deeply the pipes are buried on Joe and Connie’s property.  The main thing at risk are the stand pipes that come up out of the ground at each RV site and any hoses that are attached to them. I discussed all of this with Butch as it seemed to me that it would have to get below freezing and stay there for quite some time before we would have any problems.  It also seemed to me that if we were going to turn the main water supply off we should open a faucet on each of the supply risers so the water would have somewhere to go as it expanded.  (Water expands as it cools, reaching a maximum volume at around 34 degrees F.  As it changes state from liquid to solid it actually contracts slightly in volume.)  To be really safe we would need to drain all of the flexible hoses.  That struck both of us as unnecessary.

The aisle lights did not work again last night.  It’s always something with a RV and you have to be psychologically prepared for that or the lifestyle will drive you crazy.  This problem has occurred before and the usual reason is that the (3-way?) switch by the dinette gets toggled and renders the push switch in the bedroom inoperative but that was not the case this time.  One of the three wires that go to that switch was only attached by a few strands and broke when I checked it.  None of the connectors are in good shape so repairing those connections moved to the top of my bus project list today.  I did not get to this today, I only moved it to the top of my list.

While I made our morning coffee Linda put together an Amazon order.  Amazon Prime has worked well for us and Butch has already successfully received a UPS shipment here, so it was easier to order a bag of Science Diet cat food for delivery to our bus than to deal with the limited hours and selection of the local veterinarian or drive to one of the larger surrounding cities in the hope that a pet supply store that might stock the specific formulation we feed our cats.  She also ordered two bottles of Hach SofChek water hardness test strips and some additional silicon utensils.

Linda had our holiday letters stuffed and addressed on Christmas Eve, but not in time to get to the post office before it closed at noon, so she went today, bought stamps, and sent them on their way.  Hopefully they will arrive by New Year’s Eve while folks are still in the holiday spirit.

Sometime during the morning we got a visit from missionaries of the (local) Jehovah’s Witnesses cult.  Our conversation did not last long.  After they left I was pondering this day after Christmas visit and it occurred to me that perhaps they do an inventory of Quartzsite and the surrounding BLM camping areas so they know when someone knew has pulled into town.  I guess saving souls can be a lot of work.

Linda was doing the dishes and the Black & Decker SpaceMaker coffee carafe broke.  She checked online and was going to order a generic replacement but decided she should check the model of our unit.  When we lifted it up to look for the model number we discovered water on the shelf underneath it.  Ugh.  Suddenly we were no longer looking for a carafe but a new coffee maker.  We removed the cabinet door, latch, and lower front retaining bar and pulled the unit out.  I then removed the shelf, wiped it off, and took it outside to dry in the sun.  There are definite advantages to being someplace with bright sunshine and low humidity.

We spent a long time researching a replacement.  The particular model/style of SpaceMaker we have has not been made for years (of course), was only available used (naturally), and only for exorbitant prices (can you believe $300?) on Ebay.  To add insult to injury all of the reviews were negative, noting in particular that the unit tends to develop leaks.  Ya think?  We looked instead for something we could install, or at least store, in the same cabinet cubby as the old one.  Most of the countertop models were too tall and most of the built-ins and under cabinet models were too big, and very expensive.  We ended up ordering a simple Proctor-Silex non-programmable countertop unit without a clock for under $20 on Amazon Prime so the price included the shipping.  The reviews were good and it will store in the corner cabinet with room to spare for coffee canisters, freeing up space in the pantry for other things.  We will have to take it out and set it on the counter to use it, but that’s OK.

As noted in a previous post, there are quite a few houses and RVs around town with Over-The-Air (OTA) TV antennas on top of 20-30 foot poles and pointed approximately NNE.  There is one antenna in particular that we have seen a lot, a high-gain (directional) rotatable unit, and there are several vendors selling it as part of a kit.  The unit has an integrated amplifier and rotor and includes the rotor controller and power supply, plus 50 feet of coax and control cables.  All of the vendors are selling this kit for $70.  That’s a lot of stuff for that price, which suggests something about its quality (not good).  Another vendor is selling the poles and fittings that all of the other vendors use to build their “booths” (tents).  They have a huge assortment of connectors and will cut the sections to length if asked.  Getting the antenna 20-30 feet in the air would cost about $35.  We have been pondering whether it is worth it to us to spend this money as our bus-mounted antennas have always worked in the past and this is the first place we have been where they will not pick up even a trace of a signal.  We do not have an OTA TV antenna set up at home and it occurred to me that buying one here made more sense if it could be used back at the house.  I spent quite some time online researching long-range DTV antennas but did not come to any conclusions.

I needed a break from working at my computer and drove over to K & B Tools to see if they had shorter poles.  In the 1″ diameter they had 10′ and 8′.  The 8′ length would work well for us.  Three sections with two connectors would get an antenna 20-25 feet up depending on the mounting and we can store 8′ lengths in the front bay of the bus or in the car for transport.  We would use a base section with a flange by the driver side mirror, put a couple of long spikes through the base to keep it from moving sideways, slip the bottom pole section in it, and bungee cord the next section to the mirror support arm after wrapping it with something to keep it from scratching the paint.  Before making a purchase, however, I decided to do some more online research.

The unit being sold by several vendors is the Vortex HD from SewellDirect.com so I checked their website.  The unit is discontinued and they are selling the same kit online for $25.  That means the unit is of even cheaper construction than I originally thought and the $70 asking price suddenly seemed very excessive.  Many of the online reviews confirmed that this was not a serious antenna.  Another vendor had the Vortex and two competing units all for the same $70 price and I have concluded that they are all equally junk.

One of the websites I spent some time at was AntennasDirect.com. They appeared to have some serious antennas, with prices to match.  One of the challenges in this situation is that it appears we need to pull in OTA TV signals from a very long way away here in Q (70+ miles), whereas at home the distances are more like 40 miles.  Here in Q all of the signals appear to be coming from the same direction (although no one can explain why) so a high-gain, highly directional antenna is ideal and does not need to be rotated once it is aimed.  At home the TV signals potentially come from 270 degrees and the correct solution is an antenna with a broader reception pattern combined with an accurate and repeatable rotor.  If we do not need the rotor in Q we can forego that expense and technical complication until we get home.

One of the websites directed me to www.antennaweb.org.  This site is sponsored by the Consumer Electronics Association (CEA) and the National Association of Broadcasters (NAB).  You enter your ZIP code, and optionally your address, and it tells you what TV stations you might be able to receive and what direction the towers are from your location.  I put in the ZIP code for Quartzsite and it indicated five stations (ABC, CBS, FOX, NBC, and Independent), all 11 miles away at 234.8 degrees.  There are towers on top of a mountain in direction but they do not look like TV towers.  The direction was also surprising as it is almost 180 degrees opposite to where everyone has their antennas pointed.

As we know from our ham radio hobby RF waves can do strange things.  At the frequencies used for OTA Digital TV (DTV), however, things are “line-of-sight.”  The local speculation is that there are “repeaters” to the NNE but if that was the case I would expect the website to indicate that as the signal direction.  Another possible explanation is that the signals are coming over the mountains to the SW and bouncing off of the more distant mountains to the NE.  I would expect some multi-path distortion in this case, as the signals scatter off the mountains and arrive at the antenna from different directions, but if the antenna is sufficiently directional it might eliminate this problem.

My plan for today had been to work on my Exterior Makeover article for Bus Conversion Magazine and I finally got started on that late in the afternoon.  I finalized my selection of photos (I think) and split them up into those that will go in line with the article, print and digital, and those that will appear in the extra section of the digital edition.  I had just begun post-processing them when Linda started preparing dinner.  I have been wanting some pasta and tonight I finally got my wish.  She made a whole wheat linguine with mushrooms, onions, garlic, kale, sun-dried tomatoes, and asparagus.  What a treat.

I stopped over at Butch and Fonda’s bus to let them know about the www.antennaweb.org website.  Butch was watching an archived webcast that Technomadia did a few months ago with Nina Fusing, of the WheelingIt blog, on health care options for full-time RVers.  He had also installed Echolink software on his laptop but it was failing the Internet Connection test for UDP (User Datagram Protocol) ports.  The error messages indicated that it was probably a firewall- and/or router-related problem.  He had both so I tried opening UDP ports for forwarding in both places but it did not fix the problem.  I have never played with Echolink or UDP ports, so I was trying to figure out what to do in real time.  More research will obviously be needed.

I continued working after dinner processing photos for my article.  I received my draft of the Zena Power Generating System article back from Gary with corrections made by Stacy, his new administrative assistant.  I accepted them, made an additional correction, and returned it.  They are trying very hard to get the December 2014 issue out on December 31st and my Zena article will be one of the four in that issue.

2014/12/27 (S) Cool Temps

By 6:30 this morning our various weather apps were reporting that the temperature in Q was 31 degrees F.  At 7:00 I turned the thermostats up and climbed back in bed (electric heating pad).  I had not shut the main water supply off at the street last night so at 7:30 I got up, put on my “sweats,” grabbed a jacket, and went outside to tend to the water.  I cracked opened a faucet at each standpipe, ran water through hoses, and ran water through the hot and cold lines for both sinks in the apartment.  I shut everything off and went back inside where it was comfortably warm.

By the time I came back in Linda was up and making coffee.  How was that possible?  We have a single serving coffee funnel that sits on top of a mug.  It’s designed for cone filters but she simply folded one of our flat bottom filters and made it fit.  She ground up some beans, boiled some water in the microwave oven, poured it over the grounds, and let it drip.  I did not think we would have morning coffee in the coach again until the new coffee maker arrived next week so it was a nice treat.

I finished yesterday’s blog post while I enjoyed my brew.  I was busy enough yesterday that by the time I went to bed and tried to finish it there was too much to write and I was too tired to write it.  Linda developed a headache overnight and spent much of the day medicated and resting.  She does not get these very often anymore but when she does they put her out of commission for a day or so.  I then spent most of the day processing the photos for my next BCM article.

I took a break after lunch and worked with Butch setting up his laptop to work with Echolink ham radio software.  The software use TCP and UDP ports and requires firewalls and routers to be configured to provide port forwarding.  His laptop OS is Windows Vista, which has the Windows Firewall.  I was not familiar with UDP ports, had never set up port forwarding, and had never worked with Vista, so I was feeling my way as I went.  Their computers are connected to the Internet one of two ways, MiFi or WiFi, although the WiFi is sometimes connected through the MiFi.  Their MiFi is a Verizon Jetpack (Novatel 5510L), just like ours, so I (sort of) knew my way around that device.  Their WiFi setup consists of two WiFi repeater/routers; the WiFiRanger Mobile and the WiFiRanger Go2.  We also have a WiFiRanger Mobile, so I also knew my way around that device (sort of) but I had never worked with the WFR Go2.  We got the Echolink software to test successfully through the WFR gear using the WiFi signal at our campsite but we could not get it to test successfully through the MiFi.

In the early evening Butch called and said he was having Internet connection issues.  I went to their bus and worked four a couple of hours trying to sort out what was going on.  I was able to get him back online but saw some strange behaviors that we could not explain and were not able to resolve.  He has Nick Russell’s Gypsy Journal Blog set as his Firefox home page and it kept redirecting to the website’s home page.  I tried opening it in Internet Explorer 9 and it opened without difficulty.  Website’s do not always react the same way with different browsers, but he had been on Nick’s blog earlier in the day using Firefox.  I will have to look at it again tomorrow.

When I got back to our coach Linda was starting to prepare dinner.  It felt very cold outside even though the weather apps said it was 41 degrees F.  I decided to turn off the water supply at the street and opened some of the faucets to relieve the pressure in the pipes and let some of the water out.  Dinner was leftovers from our Christmas Day meal and everything was very good the second time around.

I finished up my photo editing a little before 10 PM and backed up my files to the NAS.  We turned the three thermostats on and set them for ~15 degrees C (~59 degrees F).  We put the extra blanket on the bed and I turned my electric heater pad up to 4. The forecast low for tonight was in the low 30’s and it was already 36 when we turned in for the night.

2014/12/28 (N) Cooler Yet

Our cats snuggled in with us more than usual last night.  They like the extra blanket and the heater pads as much as I do.  At sunup the air temperature was reported as 28 degrees F, a few degrees lower than the last forecast we saw before we turned in last night.  If it seems that we are preoccupied with the weather it is because we are in closer contact with it when RVing than we are when we are at our house.  In the motorcoach we have to more actively manage our utilities to ensure they work properly and to maintain our comfort.

We had tea instead of coffee this morning.  Until about 15 years I did not drink coffee and enjoyed morning, afternoon, and evening tea.  Hot, of course; I have never been a big fan of iced tea and I have never developed a taste for iced coffee, unless it was a Starbucks Frappuccino (in my pre-vegan days).

Linda was finally feeling better and went for a long walk this morning.  Before she left I noticed that there wasn’t any water coming out of the bird fountain so she unplugged it and helped me partially disassemble it so I could clean it.  I ended up taking it completely apart, which was fun given that it was made of large slabs of granite, in order to get to the pump so I could clean it.  I was surprised to find a small gecko-like lizard inside the pedestal base.  Butch helped me reassemble and level the unit, allowing the reservoir to hold more water, and we got the outlet tube (fountain) tightened up so the water once again squirts about four inches above the tube.  It needs to be filled every day or two.  I have not determined if the water is being consumed by birds (there are a lot of doves and Gambrels Quail here) or evaporating (low humidity and sunshine).  It is probably a bit of both.

I worked on my article most of the day, inserting photos into the Word doc and writing captions.  I took a break mid-afternoon and rode into town with Butch.  We found the LED vendor where the hams (amateur radio operators) hang out but the booth was closed.  We wandered around looking at flea market junk and I found a set of four ratcheting tie down straps, 25mm wide by 15 feet long, for $5.  I had seen similar straps at another vendor for $14, so I bought the $5 set.  We stopped at Dorothy and Toto’s Ice Cream Parlor on west Main Street and bought some excellent kettle corn.

Back at the coach I continued working on my article but was having trouble keeping my eyes open so I took a nap.  Linda had started making dinner about the time I got up when a white SUV pulled in that we had not seen before.  A reddish-chocolate-brown dog appeared and took off after some of the rabbits followed by a man with a leash.  We figured Jim and Barbara, the owners of the third motorhome at our camp, had arrived so we put our shoes on and went out to meet them.  Jim got Roho on leash and Barbara appeared shortly thereafter, followed by Butch and then Fonda.  It was dusk and cooling off quickly, so the conversation was short before everyone returned to their motorhomes.  Before going in I turned the water off at the street and opened one of the faucets on our standpipe to relieve the pressure and let some of the water out.

For dinner Linda made skillet black beans with potatoes and tortillas.  Besides the title ingredients it had onions, garlic, poblano pepper, and salsa.  I added a little Tabasco Chipotle sauce to mine.  We each had a glass of sangria, which was refreshing with this hearty dish.  After dinner I finished working on my article and I uploaded it to the BCM folder in my Dropbox.  I sent an e-mail to the publisher, editor, and new administrative assistant.  I then started uploading the photo files and went to bed.

2014/12/29 (M) Cool Cruiser Redux

We had English Breakfast Tea to start our day, followed by store bought (bulk) granola for breakfast.  We have run out of Linda’s homemade granola and I really miss it.  The stuff we buy at the store just doesn’t taste like much of anything by comparison.  After breakfast I started working on my next article for BCM.  Actually, it was an article I wrote back in February of this year but had not quite finished.  Besides the text I had already selected the photos but, as often happens, I had not finished the process of putting them in order, sorting them into print edition and digital edition extra section, post-processing them, and inserting thumbnail versions into the Word document.  So that’s what I started working on this morning.

Late morning I took a break from the photo work and pulled the cover off of the dashboard to check the turbo boost gauge.  It was, indeed, a mechanical gauge with a very small nylon tube coming out the back of it.  I opened the Prevost CatBase Viewer and looked up the part, thinking I might order one today.  The specified part was a VDO gauge, 1/8-27 NPT, but did not give the mounting hole size, the, range, or the sweep degrees.  Both 24V and 12V bulbs were listed.  I think we need 24V.  What I found interesting was that the gauge for the VIP (conversion shell) was shown as “dummy,” which meant the unit was originally shipped with a filler plate rather than an actual gauge.  The turbo boost gauge in our coach is functional but is the wrong gauge for our engine. It’s a Sentry vacuum/boost gauge.  The vacuum side is useless on our turbocharged engine and the boost side only goes to 15 PSI, which is not high enough.

VDO makes two turbo boost gauges that should work as replacements.  Both are 2-1/16 (52mm) size, 0 – 30 PSI, 270 degree sweep, mechanical units.  They come with 12V bulbs but those are easily changed.  The differences are in the faceplate markings and the mounting systems.  The Cockpit Series gauge is marked in 1 PSI increments, which I prefer, but uses the traditional rear U-bracket to hold the instrument in the dashboard.  The Vision Series gauge, which is what our new speedometer is, has 2 PSI increments but mounts using a collar that threads onto the body of the instrument from the back side of the dashboard.  I was going to call Prevost and order a gauge but both gauges are available from PartDeal.com, which is run by ISSPRO.  ISSPRO sells their own line of gauges in addition to VDO and other brands.  I was chatting with Butch and he mentioned that they were closed for the holidays and would reopen on January 2nd, so I did not order a gauge today.

We left around noon and drove to the vendor area at Central Avenue and Kuehn Street.  We parked the car and wandered around checking out vendors who were not set up or open the last couple of times we were here.  While we were strolling I got a call from Frank Morrison.  Frank was at the Arcadia Bus Rally in Arcadia, Florida and wanted to know if we were there.  I photographed Frank’s bus, the Cool Cruiser, at last year’s rally and the article was the cover story in the June 2014 issue of Bus Conversion Magazine.  Frank said that in the welcome bag each attendee received there was a second bag from BCM and in that bag was the June 2014 issue.  Cool.  I wrote two other articles for BCM as a result of that rally.  The February 2014 issue was on the rally itself and the April 2014 issue featured the Iron Horse, an Eagle bus conversion.  Both articles ran in the cover/centerfold position.

For lunch we had chickpea salad on sourdough bread with dark greens and were surprised to see a Trek motorhome backing in to the property.  Jim and Barb obviously knew the people and helped them get parked.  Once they were in their site we went out and introduced ourselves, as did Butch and Fonda.  Jack and Maria were only here for the night.  They had been camped at the BLM Pyramid Lake LTVA, about 60 miles south of Quartzsite, but developed issues with their solar charger and a squealing/screeching noise when they start their engine.  They had appointments first thing in the morning to have these problems addressed and were planning on heading back to the desert tomorrow.  Barb mentioned that she had talked to Joe and Connie and Joe said we did not have to turn the water off at night.  One less chore is good by me.

Linda went for another power walk while I worked on my article.  I want to get my “almost finished” articles done and off to the magazine so I can work on some new pieces.  It’s easier on me and them if I can keep the pipeline flowing and stay ahead of them.

For dinner we had soy riblets with barbecue sauce, macaroni and cheese (gluten and dairy free), and fresh sautéed green beans.  The riblets were tasty, as always, and the green beans were excellent, but the mac & cheese was not good eats.  It was the second of two boxes we bought somewhere and Linda even added some things to try to improve them but it didn’t help.  We won’t be buying this product again.

Having spent a portion of the day processing photos I did not feel like doing more of that after dinner.  I played a few puzzles on my iPad while Linda played word games on hers with Karen and Ron.  We were in bed by a little after 9 PM and I went right to sleep.

2014/12/30 (T) Trash Day

Tuesday is trash day.  The collection truck comes at noon so the trash can has to be to the curb by 11AM.  I happened to glance outside as we were sitting down to enjoy our mourning tea and it was already at the curb.  Jim or Barb are responsible for this when they are here, along with maintaining the apartment and laundry room, and one of them had obviously taken it out.

Jack and Maria pulled out around 8:30 AM with Maria driving their Trek and Jack following in their SUV.  We figured we had seen the last if them and did not even get to say ‘goodbye’ so we were surprised when they returned an hour later and backed their motorhome back into their spot and leveled it.  They left in their car fairly soon thereafter and did not return until later in the day.

Linda went for her usual morning walk and I continued working on my Habitat For Humanity article for Bus Conversion Magazine.  Around 11:15 AM my Bluetooth mouse signaled that its battery was critically low and needed to be recharged.  I plugged it in and figured that was a good time to take a break and do something else.  Butch was outside with his tool bay open and Jim was out there with Roho so I went out and chatted for a while.  I needed to repair the connections on the front switch that controls the aisle lights so I borrowed Butch’s VOM, wire stripper, and terminal crimper and got three 1/4″ female crimp connectors from him.  I have all of these tools and supplies, but his were more convenient.

Being a 3-way circuit the switch has three wires.  It’s a double-pole double-throw switch so it had a second set of unused contacts.  I used the VOM to determine if the unused set of contacts worked as expected.  They did, so I removed the old connectors, one at a time, cut the wire loose from the connector, cut about an inch off of the end, crimped the new connector onto the wire, and pushed the connector onto the corresponding unused terminal.  I tested the circuit and I was able to turn it on and off from both switches.  (The other switch is in the control panel in the bedroom by my side of the bed).

My recollection is that the 3-way circuit feature did not work prior to this.  That could have been because the wire that broke off the other day was only attached by a few strands, or because of a failure in the switch on that set of contacts, or both.  The plastic insulated housings on the old connectors were very brittle and showed signs of heat damage, which could have occurred as the result of a very marginal connection.  When I tried to pull them off of the switch terminals they shattered.  I was also unable to pull the metal connectors off of the lugs and had to pry them open and then pry them off.  The first 1/2 inch of each wire was also discolored and brittle, indicating heat damage.  I did not bother to check the other set of switch contacts for correct function as the lugs also showed signs of heat damage and I do not plan to use them again.  In fact, I plan to replace the switch if/when I happen to find one or get around to ordering one.  The whole repair, including borrowing and returning tools, took less time to do than it took me to describe the work in this post.

Linda confirmed that our Fedex delivery was scheduled for today.  We have been rationing the cats’ food the last 48 hours and they are confused as to why.  They do not usually finish the dry kibble in their bowls but insist on having fresh kibble added each morning and evening.  To accommodate this expectation we have been adding very small quantities of fresh kibble to their bowls.  I don’t think cats can count, but they can definitely tell the difference between serving sizes of kibble and are not pleased at our puny offerings.

Jack and Maria returned sometime during the afternoon.  I saw them pull in but did not note the time.  We had sandwiches for lunch and then went for a walk.  We headed southwest from our campsite and worked our way over to Moon Mountain Avenue.  Our destination was the Salvation Army Store but we stopped to look at things along the way.  We checked out the Mountain Quail Cafe, but the only thing on their menu we could eat was the side salad.  Too bad, it looked like a cozy, comfortable place and the sign said they featured ‘home cooking.’  Well, not our home, of course.  ‘Home cooking’ is usually code for “everything is cooked in butter, we make liberal use of eggs and dairy, and treat bacon as a condiment.”

Moon Mountain Avenue between Main Street and Quail Trail seems to mostly be developments rather than individual lots.  We stopped at one place that had a lot for sale at the corner of Moon Mountain and the entrance road.  All of the lots were separated on three sides by the exact same low brick wall construction that we have seen all over town.  Some of the lots had the brick wall with a gate across the front.  As we were studying this lot the man across the street pulled out and drove over to see if we had any questions.  We really didn’t, but he answered them anyway.

It turned out that most of the developments on Moon Mountain Avenue were co-ops.  The price on this particular lot ($49,900) did not buy you a deed but rather a fractional ownership of the co-op with a lease for the perpetual use of that particular lot.  The price also included compensation to the current leaseholder for improvements to the lot, and whatever appreciation in value the market would bear.  You were free to sell your ownership share along with the leasehold for your lot, or will it to your children.  (This co-op, like many of the RV Parks in town, was a 55+ community, so it would be a long time before our “kids” could use it if they were interested, which I doubt.)  The annual maintenance fees for this co-op were $56/month ($672/year) and included water, sewer, property taxes, and association dues; everything except electricity.  Each site had its own billable electric meter.  The only added expense would be property taxes for improvements, such as a park model trailer or RV port.

We were glad we stopped and that this fellow was willing to share this information with us.  We suspect that many of the similar looking areas around town are probably also co-ops or even developments with deeded lots.  Every little thing we learn like this helps us develop a better understanding of Quartzsite.  BTW:  the Salvation Army store was closed.  We have walked or driven by at various times on different days and have yet to find it open for business.

When we got back to camp Linda needed a few things for dinner and thought the Road Runner Market might have them.  She grabbed Fonda and they took off in our car.  Butch was working on his HF mobile ham radio antenna on the roof of their bus and Barb was scurrying around the property taking care of things.  I was going to help Butch but got a phone call from Michele Henry of Phoenix Paint to discuss the spots on our roof and what to do about them.  Once we were done talking I was able to lend Butch some assistance with the antenna project which involved the installation of bonding (grounding) straps between the antenna and the roof of the bus.

The FedEx truck showed up before Linda and Fonda got back so I opened the box and unpacked the contents.  The kitties recognize Science Diet cat food bags and were very happy to see it.  I was opening the new coffee maker when Linda returned.  We got it unpacked and stored in the cubby where the old one was installed.  She had started cleaning and rearranging drawers before our walk so she finished putting everything away or set aside things she had decided she did not need to have on board.

I’ve been needing a haircut for a while and prevailed on Linda to take care of it while we still had sunlight.  After she was done I used the clippers to trim my beard and then put everything away.  Linda checked our log book and according to our records the last time we dumped our holding tanks was on the 20th.  We like them to be as full as possible before dumping, as they evacuate better but cannot let them overfill so we decided to dump them while it was still daylight.  Better safe than sorry.

I got another Hach SofChek water hardness test strip from Butch and checked the output of our water softener.  It measured 7 on a scale of 0 (soft) to 25 (very hard).  A reading of 7 is considered ‘hard’ water but the softener was still working somewhat as the water coming straight out of the tap measured 25.  We still had 1/3 tank of fresh water and I decided to add 1/6th of a tank, about 20 gallons, and bring it up to the 1/2 level.  I will have to recharge the water softener tomorrow before adding any more water to our tank.

I was able to finish editing photos while Linda prepared dinner.  She cut a large poblano pepper in half lengthwise and stuffed it with leftovers from two nights ago.  She also made Mexican rice from scratch using Texmati rice, onions, garlic, tomato sauce, cumin, and vegetable broth.  The peppers and rice were very good and went well with a glass of sangria.

Early this morning I thought I might finish my HFH article for BCM and be able to upload it this evening, but that did not happen.  I still needed to insert the thumbnails into the Word document and write the captions.  I was too tired to start that work, knowing how long that would take, so I played a few puzzle games and went to bed.

2014/12/31(W) Adios 2014

The polar outbreak that is gripping most of Canada and the U. S. A. has also made its presence felt here in Quartzsite.  The overnight low was 35 and we had light rain.  The high today won’t break 50, and the lows for the next two days are forecast to be in the upper 20s.  Not that far from us (~180 miles) Joshua Tree NP had a rare dusting of snow and the forecast for Flagstaff is for as much as 16 inches of holiday whiteness.  The temperature back home is in the teens, so we have no complaints about the weather in Q.

Linda went for a long morning walk and found the Salvation Army store open.  Apparently their hours are 8 AM to 1 PM Monday through Friday and we had managed to always walk past outside that time frame.  She picked up a few things from the Road Runner Market while she was out.  By the time she got back at 1 PM I had just finished inserting photos into my Habitat For Humanity article and captioning them so I had her proofread it.

With the proofreading done we had a bite of lunch and then drove to Blythe, California to pick up some grocery items that are not available here in Q.  We stopped first at the AutoZone store, in the northwest corner of the Albertson’s parking lot, and bought supplies for cleaning the bus.  Now all we need is a nice warm day so we can get out early and work at it until we are done.  We need to do the car, too.

We got a TXT message from our son while driving back to Q.  It was a short video of grand-daughter Madeline climbing into her car seat all by herself.  That led to an exchange of messages leading to the question from our daughter as to whether she could climb out by herself.  That question will apparently be answered tomorrow.  The growth from age one to age two is quite amazing.

When we got back to our coach I carried in the groceries.  While Linda put them away I added 30 gallons of water to our fresh water tank.  I really wanted to recharge the water softener first, and bought a 40 pound bag of solar salt at Albertson’s for that purpose, but it was too late in the afternoon and too cold to start that process.  I still need to fabricate the special perforated tube for the water filter housing, so it will take longer than a normal recharge.

We had some hot tea and cookies and relaxed for a while.  Linda finished proofreading my HFH article and I then went through it one more time to make sure it was ready to upload.  She also e-mailed Mara, one of the women who participated in the HFH build, to wish her a happy holiday and see what part of the country she was in at the moment.

Dinner was a simple, easy affair; a nice salad of fresh greens with other goodies mixed in and a couple of Asian noodle soup bowls.  Sometimes Linda does not feel like cooking and we keep a certain amount of packaged convenience food on board for such occasions.

It has been our tradition since we started dating in high school to stay up and celebrate the coming of the New Year.  We rang in three calendar changes while dating and have observed 42 more since getting married.  Tonight was number 43.  For all of that time we have rarely gone out on New Year’s Eve, preferring to stay close to home and off the streets.  Besides, large, loud parties have never been our style, especially since I do not dance.

When we were dating, and in the early years of our marriage, we would spend the holidays in the St. Louis, Missouri area visiting family.  My parents hosted a New Year’s Eve party that, in retrospect, was quite a large and well-attended event, and that is where we hung out, often joined by a few friends from our high school days.  As we attained legal age a champagne toast became part of the tradition (although in the privacy and safety of my parents’ home we probably started this tradition a bit sooner).

As our children came into the picture we still traveled to St. Louis but when they got a bit older we started spending our holidays at home.  Linda’s sister, Marilyn, started visiting us between Christmas and New Year’s and the tradition of assembling a 1,000 piece jigsaw puzzle on New Year’s Eve began.  Linda usually did not cook a New Year’s Eve meal.  Instead we had California Dip (made from Lipton’s Onion Soup mix) and chips, jumbo shrimp with cocktail sauce, smoked salmon, and other munchies that we nibbled on throughout the day.  This was, of course, all pre-vegan.  Starting around 11 PM we would turn the TV to one of the networks doing the countdown from Times Square in New York City.  I think it was ABC as we usually watched Dick Clark.  At 11:55 PM we would open a bottle of champagne and fill our glasses.  When the ball dropped and the clock struck 12 we would toast the New Year.

Since our children became adults they have spent New Year’s Eve with their friends and families.  Besides Marilyn we have had occasional guests at our house but more often it has been a quiet evening at home with just the two or three of us and we often went to bed shortly after the arrival of the New Year.  The last two years have been unusual in that we moved to a different house in 2013 but have never celebrated New Year’s there.  Given that we plan to do most of our extended RVing from mid-fall to mid-spring it may be quite (if ever) before we celebrate New Year’s at the new house.

For the 2013-to-2014 change we were at the Arcadia Bus Rally in Arcadia, Florida where we attended a party with 200 other people and a live band.  We spent much of the evening outside where the volume was about right and the temperatures were pleasant.  This year we are camped on private property in Quartzsite with three other couples, none of whom seemed interested in staying up until midnight, so we toasted the New Year in the privacy of our coach three times before going to bed.  We are unable to receive OTA TV signals here, so we watched (listened to) the ball drop in Times Square on Linda’s iPad (at 10 PM MST) and shared a champagne toast.  She then sent TXT messages to both of our children.  At 11 PM MST we shared another champagne toast.  I sent a TXT message to my sister and niece while Linda sent one to her sister, all of whom live near St. Louis, Missouri in the Central Time Zone.  At our local midnight we shared our final toast and welcomed the New Year in the Mountain Time Zone.  If we had been so inclined we could have driven to Blythe, California, returning temporarily to 2014, and celebrated the coming of the New Year in the Pacific Time Zone.  But we didn’t.  That kind of thing is more fun to “brag” about than it actually is to do.

Before turning in for the night I updated my article status spreadsheet and then uploaded it to the BCM folder in my Dropbox along with the HFH article and associated photos.  I then e-mailed the team at BCM to let them know it was there and wished them a Happy New Year.  I also e-mailed a link to a PDF version of the article to Steven Gullette, our team leader on the HFH build that was the main focus of the article, and wished him a Happy New Year as well.  So endith another year.  Adios 2014.

 

2014/12/21-25 (N-R) The Holidays Arrive

2014/12/21 (N) Winter Solstice

Linda was reading an interesting tidbit online this morning about the winter solstice, which occurs today in the northern hemisphere.  It usually occurs on the 21st, like today, but occasionally slips into the 22nd.  While it is the day of the year with the least hours of sunlight (between sun up to sun down) it is not the day with the latest sunrise (which occurred a couple of weeks ago) or the earliest sunset (which does not occur for a couple of more weeks).  Why is that?  Axial tilt, elliptical orbits, and a “day” that is not exactly 24 hours.  Science is fun.

Today was a stay-at-home / stay-in-town day for us.  Linda vacuumed the coach and mopped the floor tiles.  She says she likes to do this once a week to keep the cat hair under control.  By “likes” I think she means “needs.”  She also decided to do the laundry.  When we are at our house the laundry is usually my chore but for some reason, to which I am not privy, she takes over this chore when we are living in the RV, at least initially.  The same thing happened last year at Williston Crossings RV Resort, although we eventually both did laundry until I was able to win back my rightful chore.  So far again this year it has been her self-selected task here at Quartzsite and I have not gone out of my way to reclaim my rightful place as master of the laundry.

What I did instead of laundry was spend the morning finishing our 2014 Year-in-Review holiday letter.  Linda proof read it and then I converted it to PDF and did a final check of the layout to make sure the text and photos had not shifted or been clipped.  I copied it to a flash drive so we can take it someplace in Blythe tomorrow and have it printed.

The other day I noticed that the manifold pressure sensor (turbo boost) on Butch and Fonda’s 6v92 was mounted vertically on the front passenger side of the ECM.  I could not see exactly how it was mounted, however, so today I finally looked it up in the DD 92 Series manual.  I did not attempt to reattach our sensor module today but I was curious to see what would be involved.  I also continued to interact with other Prevost owners on the Prevost Community forum regarding the turbo boost issues and the dashboard gauge, which does not have the correct scale for our engine.  That thread has led to a dialogue about the SilverLeaf systems, including the VMSpc that we have, and an alternative system from RV Tech Tools that uses an iPad app named “RV Dash” and a wireless (WiFi) interface named “CANpod” from Cubix Labs.

With our various chores done we had a light lunch of chickpea salad on a bed of mixed greens and then went for a long walk.  The walk took us down Washington Ave. and then over to Kitsap Ave. to see a gorgeous Adobe house that Linda had discovered on a previous walk.  That led us to the backside of the west-central “vendor” (flea market) area on the north side of Main St.  We are not collectors, and we are not into antiques, guns, rocks, jewelry, or junk, so we saw very little that interested us.  We did see a few pieces of Pyrex, which our daughter and son-in-law were collecting at one time, and I am always on the lookout for a good deal on a tool I can’t live without, but mostly we saw endless quantities of stuff that we could not fathom anyone buying.

We crossed Main Street and visited the Tyson’s Well Stagecoach Stop Museum.  The grounds and building were open, admission was free, and it was unattended.  There were items for sale and if we had wanted something we would have put the money in the collection box.  That’s small town.

We headed east on Main Street and crossed back to the north side using the crosswalk at AZ-95 (Central Ave.).  We then continued east and stopped at the Road Runner Market.  We were pleased to find that they had a small but good selection of fresh produce.  On our way out the door the florist gave Linda a red and white carnation.  We will definitely be doing some of our local grocery shopping there.  We knew there was a restaurant/bakery on the far east end of Main Street so we kept on walking.  Sweet Darlene’s looked like a nice local place for a home-cooked style meal, but did not have anything on the menu we could eat.  The bakery turned out to be a small display case with pies and sweet rolls, but they did not make their own bread, so we won’t have any reason to come back.

By this time it was getting to be late afternoon, the cloud layer had thickened, and it was getting a bit chilly so we headed back towards Central Avenue.  We counted laundromats along the way, and passed at least four before getting back to our coach.  Not that we need a laundromat—we have a laundry where we are staying—but with all of the boondockers in and around Q it is a matter of some curiosity to us how/where they take care of things like this.  By the time we got back to our coach we had walked just over five miles.

Sunset over the Dome Rock Mountains due west of our encampment.

Sunset over the Dome Rock Mountains due west of our encampment.

By 5:15 PM the sun had slipped just below the mountains to our southwest and the sky started to glow pink for 360 degrees around us.  The sunset went on for over 30 minutes, the pinks deepening to reds.  And then, just like that, the color was gone and darkness enveloped the valley.

For dinner Linda made a simple green salad with raisins and peanuts.  She then heated up some vegan re-fried beans, pan-grilled a package of fajita vegetables she got from Connie before they left, and then heated two tortillas.  We each made a tasty roll up, adding some salsa and vegan sour cream.  She washed some black seedless grapes and set them out for desert.  They were very refreshing after the somewhat heavier and spicy main course.

2024/12/22 (M) Compressed

We had planned on driving to Blythe, California today but those plans changed fairly early in the morning.  Butch got an update that his air-compressor was on a UPS truck in Blythe and scheduled for delivery today.  I had promised to help him with the installation and provide a few tools he did not have with him so we decided to stick around camp.  We were also waiting for Connie’s realtor, Carolyn, to come by and pick up two yellow Post Office slips.

Linda took her morning walk after breakfast while I downloaded the October and November issues of Bus Conversion Magazine in both standard- and high-definition.  I was really glad to finally see these issues.  The October issue included my article on our T. F. Hudgins Spinner II Centrifugal By-pass Oil Cleaner project.  That was my one remaining article waiting to be published.  I have at least a half dozen in process, at least that many more for which I have taken photos (and written blog posts), and a very long list of future projects, so it’s time to get the next batch of articles ready to submit.

When Linda got back I drove to the print/copy/fax/pack/ship/etc. store on east Main Street to see if they could print our holiday letter.  They had plain 8.5×14 white paper, and the photos looked OK, but it was going to cost $4 per letter ($2/side) so I paid for the one copy and left.  They suggested that I try Weeks Printing in Blythe (20 miles west) or Staples in Lake Havasu City (70+ miles north).  Since we will likely head to Blythe tomorrow we will check out Weeks first.

As long as I was out I stopped at Barry’s Breads and bought a couple of fresh “rolls” which were really small loaves of bread.  Barry runs a little seasonal bakery out of a temporary vendor stand on the northeast corner of Central Avenue (US-95) and Kuehn Street.  Most of his products have butter or cream cheese as ingredients—his Danish pastries are as big around as a dinner plate—but he does make just plain bread and everything is made fresh daily.  Back in camp Linda called Weeks Printing and they quoted $1.25 for each 2-sided letter.  Much better.  We will check them out when we make it to Blythe; probably tomorrow.

For lunch Linda made a batch of her scrumptious chickpea salad/spread and served it on one of the rolls I bought at Barry’s.  After a week of cloudy skies, cool temperatures, and a little rain we finally had a day with clear, sunny skies and the high temperature up into the 70s.  Butch decided to remove his defective air-compressor and there wasn’t anything we could do to help (or stop him) so we decided to clean some more of our coach exterior.  I wanted to work from the top down, which meant starting with the roof.  That, in turn, meant getting out the Little Giant convertible extension/step ladder and setting it up as a 14 foot extension ladder.  In this configuration it extends beyond the top edge of the roof at the front, making it safer for me to get up on the lower roof area from the driver’s side.

Rinsing down the roof of the coach (photo by Linda).

Rinsing down the roof of the coach (photo by Linda).

The roof was very dirty and it appeared that we might have more than just embedded dirt to deal with.  The roof has a sprayed-on ceramic-infused white coating with a surface akin to medium grit sandpaper.  It reflects sunlight and provides a nice nap for walking on, but also traps dirt.  The last time the roof was cleaned was in early April, just before we left Williston Crossings RV Resort.  I had been on the roof subsequent to that, in our pull-through driveway at home, using it as a platform for trimming tree limbs.  I do not recall it being unusually dirty at that time, but I was focused on other things.  If it had been, I probably would have washed it, but maybe not; I was focused on other things.

I used a little bit of Dawn dish soap in several gallons of water and our soft, long handle, brush to try and scrub it clean and then rinsed it with softened water.  It was better by the time I was done but far from 100% clean.  I also scrubbed all of the metal awning covers and then hosed them off and rinsed the awning fabric.  When I was done on the roof I sprayed off all four sides of the bus, but even with the softened water it left spots and streaks.  Another unfortunate side effect of this work is that it frightened our male cat, Jasper, who ended up hiding behind the steering column in an attempt to escape the sights and sounds of a ‘monster’ on the roof.

We would like to get the body clean but there’s no point doing anything until I get the roof finished (Linda does not climb ladders and she does not get on the roof of the bus.)  At a minimum I am going to have to use a stiff scrub brush and a stronger solution of Dawn dish soap, or perhaps a commercial cleaner that can treat mold/mildew along with just plain dirt.  We will then have to do the vertical surfaces in small sections, scrubbing, rinsing, and drying as we go.  We have a sprayer for our hose that has a small bottle for additives and one of the reasons I bought it was to try using a dishwasher rinse aid, like Jet Dry, to see if it would eliminate spotting.  To-date, however, I have not tried that.

The old Bendix Tu-Flo 700 air-compressor out of Butch & Fonda's MC-9.

The old Bendix Tu-Flo 700 air-compressor out of Butch & Fonda’s MC-9.  The governor is the silver thing on the left.  The open port on top is the air discharge where the unloader valves are located.

Once Butch had the old air-compressor out of their bus he turned the input shaft and noted that the pistons were not pumping air.  This confirmed that something had failed internally and ordering a replacement was the right thing to do.  There wasn’t much else to do so we all sat around in the warm sun and waited for the UPS truck to show up, which it finally did around 3:45 PM.  We (me, Linda, and Fonda) suggested that Butch wait until tomorrow to start installing it, but we knew that was not going to happen.  The compressor was a significant road failure that had bugged him since it happened and he was anxious to get it fixed.

 

The new (re-built) Bendix Tu-Flo 700 air-compressor with the old spline and new port plugs.

The new (re-built) Bendix Tu-Flo 700 air-compressor with the old spline and new port plugs.

The Bendix Tu-Flo 700 he received is designed specifically for mounting on Detroit Diesel 92 series 2-stroke engines but has more ports on it than are typically used in this application.  Making sure to match the configuration of the old compressor, Butch installed new plugs in the unneeded ports.  He then removed the fittings from the old unit one at a time and installed them in the new one, being careful to line them up exactly the same way.  I helped by holding the compressor on a work table while Butch tightened the pipe threads.  This was the easy part of the project as we were standing at a tall bench with plenty of room to work and good light.

 

The new air-compressor with fittings.  Note the alignment marks for orienting the fittings correctly.

The new air-compressor with fittings. Note the alignment marks for orienting the fittings correctly.  The spline is in the upper left of the photo.

The hard part was getting the air-compressor re-installed.  Butch eventually got it onto two of the four mounting studs, which then took the weight.  We discovered a clearance issue with one of the port plugs and he had to pull the compressor back out.  He removed a plug from the old compressor, which did not stick out as far, and reused it in the new compressor.  With the compressor back on the studs it now lined up better but the spline would not engage the drive gear on the end of the engine camshaft.  He put a wrench on the crankshaft pulley nut and turned the engine slightly by standing on the end of it while I jiggled the air-compressor.

The "governor" mounted on the new compressor.

The “governor” mounted on the new compressor.

The spline eventually engaged the engine gear and the air-compressor gear enough that Butch was able to fully seat the flange and insert/tighten the four mounting studs, lock washers, and nuts.  Per the instructions, he reconnected all of the lines except for the air discharge and called it a night.  The coolant goes back in tomorrow and Butch will then start the main engine to make sure the compressor works, check for leaks, and let any contaminants get blown out the discharge fitting.  If everything looks good he will attach the discharge line, which connects the outlet port of the air-compressor to the coach air system, and air up the bus.

The new air-compressor (blue) mounted on the rear of the engine block (towards the front of the bus).

The new air-compressor (blue) mounted on the rear of the DD6V92TA engine block (towards the front of the bus) in Butch and Fonda’s MCI MC-9B NJT.

At least we were successful in convincing Butch to wait until tomorrow to put the coolant back in the engine.  By the time we finished working, put our tools away, and got cleaned up it was 7:30 PM and had been dark for two hours.  Linda reheated the leftover fajita fixings and we had open-faced tortillas with Fritos corn chips, salsa, black grapes, and Sangria.  We were both tired so we relaxed for a while after dinner and then went to bed.

2024/12/23 (T) Blythe, CA

We got a call from Connie right after breakfast letting us know that the two packages Carolyn picked up yesterday were for us and Butch.  We needed to pick them up before 11AM as Carolyn had an appointment at that time.  Linda was headed out for her morning walk anyway so she walked to Rock Reality, near the post office and uptown drugs, to get the packages from Carolyn.  (Carolyn is Joe and Connie’s realtor.)  She dropped off the two P. O. Box – Mail Pickup Notice cards at the post office while she was there.

Our package was from Madeline (Brendan and Shawna), to be opened on Christmas Day.  Butch’s package was the unloader valve kits for our Bendix Tu-Flo 700 air-compressors.  He ordered them while we were in Forest City, Arkansas for delivery to Amarillo, Texas but they did not arrive in time so his friend forwarded them to our Quartzsite location.

Butch and Fonda used most of the morning to put the coolant back into the engine.  Our buses, which still have their over-the-road heating systems, hold a lot of coolant.  Ours requires 34 gallons.  The buses are not identical, but I suspect theirs requires at least 30 gallons.  And it is very important that the cooling system is filled to capacity and has had all of the air purged out of it.  It’s a big, messy job.

They got as much in as they could by standing on a ladder and pouring it through a funnel into the filler tube for the surge tank.  The radiators on the MCI MC-9 are located above the engine, one on each side wall at the rear of the bus, and the surge tank is located above them, so the filler tube is approximately 9 feet from the ground.  Butch started the engine to warm it up enough for the thermostat to open and to circulate the coolant and opened a couple of bleeder valves to let air out.  He also checked the outlet fitting on the new air-compressor to verify that it was pumping air.  It was (hurray!), so he shut the engine off, attached the air line to the outlet fitting, and started it back up.  The chassis air system (suspension and brakes) came up to pressure and the air-dryer “sneezed” (momentarily opened its purge valve) so the system was fully operational.

We planned to go to Blythe, California today and Butch and Fonda wanted to go too, so he shut off the engine and they cleaned up their campsite.  We were sitting in our coach when the winds came up rather strong.  Linda checked the weather and the winds were out of the north at 20 MPH and forecast at 22-25 MPH until 6 PM.  That was strong enough for us to retract our awnings, close our roof vents, collapse our folding chairs, and stow our patio mat.  Butch and Fonda also retracted their patio awning and stored all of their outdoor equipment and furniture.  We had the old patio awning on our Itasca Sunrise torn off by strong (thunderstorm) winds while we were away from the motorhome and have been extra careful about awnings and wind ever since.

With all of that done we headed to Blythe in their Chevy Suburban.  From 879 feet ASL in Q we climbed to about 1200 feet ASL over the low mountain range that separates the two valleys, and then descended to 240 feet ASL as we crossed the Colorado River and entered California.  A few miles later we took the 7th Street exit and we were there.  The 20 mile drive was only five more miles than the trip we made from Williston Crossings RV Resort to the Publix grocery store (at the southwest corner of Gainesville, Florida) last winter, so it did not feel like a long way to go for groceries.  At home we have supermarkets about five miles away in three different directions.  Butch and Fonda typically drive into Logansport for their groceries, a distance of 12 miles, so we are all used to traveling some distance to purchase our food.

The Smart & Final Extra and the Albertson’s were on the NW and SE corners of 7th and Hobsonway, just north of I-10, making them especially convenient for us, so this is where we will likely shop every other week or so.  But our first destination was a few blocks farther west on S. Main St. where we found Weeks Printing.  They were eventually able to access our flash drive and open the PDF of our holiday letter.  They had a high quality paper in 8.5”x14” size, and were able to print our letter 2-sided on a good quality color laser printer for a very reasonable price of $1.25 per letter ($0.625 per side).  They did not take credit cards so we paid cash, but it saved us a 73 mile trip (one way) to Staples in Lake Havasu City.

Self-portrait of the blogger.  I am merely a reflection of my former self.

Self-portrait of the blogger. I am merely a reflection of my former self.

At the Smart & Final Extra we bought fresh produce, soy milk, and some bulk, canned, and packaged items.  They did not carry the Silk brand soy coffee creamer that I like, and there were a few items Butch and Fonda needed that the store did not have, so we drove across the street to Albertson’s and got those items.  I stayed in the car with the groceries, but I already knew that the Albertson’s would be a nice store based on our experience with the chain in Sheridan, Wyoming during summer 2013.  With our shopping done we returned to Quartzsite.

I carried the groceries from the car to the bus and Linda stored them, discovering that she had an empty tub available in the cabinet above the refrigerator.  By the time she was done it was approaching 4 PM so she prepared chickpea salad sandwiches as a quick, light lunch and then announced that we should go for a walk before it got dark.  She let me chose the route so we crossed Central Avenue (AZ-95) and walked to the city park, which has a very nice baseball field with lights and the only grass we have seen in Quartzsite.  There was also a skateboard facility, a football field, and two F4 Phantom jets (minus the engines and other equipment).  The Quartzsite Metal Detecting Club (QMDC) has a practice field adjacent to the park.  The park is located near the following municipal facilities:  Community Center and Library, County Court, Police Station, and Post Office Annex (where most of the P. O. Boxes are located).  The Fire Department is a little farther north on Tyson Wells Street just east of Central Avenue.

The sun was getting near the tops of the mountains to our southwest so we headed pack to our coach and settled in for the evening.  For dinner Linda made a barley risotto with garlic, shallots, mushrooms, sun-dried tomatoes, vegetable both, and seasonings.  While she was cooking I got a call from my dad and got him caught up on our whereabouts and activities.  The risotto was excellent and we each enjoyed a glass of sangria with our meal.

I don’t know if we are just relaxed, or really tired after a hard summer and fall, but we have both been going to bed earlier and waking up later than usual.  Or perhaps it is just the effect of fresh air and sunshine.  Whatever the reason, it’s nice to be able to just sleep when that is what we feel like doing and get up when we are read.

We have an excellent Verizon signal here in Q.  Linda often likes to pace up and down Lollipop Lane while talking on the phone.  If you lived on Lollipop Lane you would too.

We have an excellent Verizon signal here in Q. Linda often likes to pace up and down Lollipop Lane while talking on the phone. If you lived on Lollipop Lane you would too.

2014/12/24 (W) Christmas Eve

It’s Christmas Eve and we woke to a temperature of 37 degrees, clear skies, light winds, and no snow.  The forecast high for today was 66, with no snow.  Do I miss snow at the holidays?  Not really.  At one time (high school) I considered myself something of a “romantic” in the sense that I liked the classical music of the romantic era, but I am not particularly nostalgia.  If I was, we would own a restored 1957 Chevy; red, of course.  No, we had snow at home before we left and as a harbinger of things to come we took it as a sign that our departure was overdue.  Christmas in the desert will be a new experience for us, but so far it looks very agreeable.  We will miss being with family, of course, but we are not alone here and technology keeps all of us much more connected than it once did.

Having been to Blythe yesterday we did not have any last minute shopping to do today.  The desert was there yesterday and will be there tomorrow (I presume) so we did not have to see it today.  With the holidays upon us I did not feel like working on bus projects.  Linda started addressing the envelopes for our Year-In-Review Holiday Letter and then worked on food preparations for tomorrow’s dinner with Butch and Fonda.  It seemed like a good day for me to finally start catching up on some things that I have not had time for in a while.  For instance, I need to work on articles for Bus Conversions Magazine, update our bus project list/status, update our website, upload some blog posts (OK, a LOT of blog posts), and catch up on the blogs I follow using the Feedly app on my iPad.  I am way behind on all of these tasks and starting to feel some pressure about it, albeit self-imposed.  I do not have to do any of these things if I don’t want to, of course, but they are activities that I enjoy and want to do.  Still, being way behind takes some of the fun out of it and makes it a bit more like work.  I won’t get caught up in one day or one week or even one month; it will take many weeks of persistent effort.

After checking e-mail, I settled in to work on my article about the exterior renovation of our motorcoach.  Michele Henry of Phoenix Paint helped me finish the article in early October but I still needed to select and caption all of the photos.  While I worked on that Linda walked to the Road Runner Market and managed to snag the last 3-pack of yeast.  When she got back she made her orange cranberry relish for tomorrow’s dinner.

We took a break for lunch and then Linda headed out for her daily power walk.  When she got back she continued addressing envelopes for our holiday letter.  Just as I was feeling like I needed a break, Butch knocked on the door to let me know he was working on a small project that might interest me.  He had already burped the coolant lines that supply heat to the living area of their bus when driving and gotten the last of the coolant into the system.  His new project was getting an alternator driven tachometer connected and calibrated.

It turned out that he needed positive DC power to the tachometer in addition to the ground and RPM signal.  He was able to temporarily pick up 24VDC from the positive terminal of the starter, found a convenient ground point, and picked up the rotational speed from the stator terminal on the back of the alternator.  With the engine running at low idle he measured the RPM of the main crankshaft pulley using an optical sensor instrument.  It was just over 600 RPMs so he adjusted the tach via a set screw on the rear to match the reading.  He kicked it into high idle and measured the rotational speed as 950 RPM.  That is what the tach displayed within the precision of the markings.  He already has a signal wire run from the engine compartment to the cockpit but needs to mount the tachometer in a separate bullet housing, connect the wire on both ends, and provide positive and negative (ground) DC to the instrument.  He decided not to take on that project today.

(Note:  RPM is universally understood to be an abbreviation for “Revolutions Per Minute” but that is not necessarily correct.  An object such as the pulley on the end of an engine crankshaft rotates about its own axis, just as the earth does, and has angular velocity which is properly measured in rotations per some unit of time or angular displacement per some unit of time.  The abbreviation is, of course, still RPM.  In the case of the pulley, however, Butch put a small piece of white tape on the face of the pulley at the outside edge to act as a target for his optical sensor.  If we consider the piece of tape as a separate object then it does, indeed, revolve around the center axis of the pulley, just as the earth revolves around the sun.  Viewed thus way, revolutions per minute is technically correct.  As with many things in physics, it depends on your frame of reference.  So much for today’s physics lesson.)

This building houses (L-2-R) the laundry room, the apartment, and a small workshop.

This building houses (L-2-R) the laundry room, the apartment, and a small workshop at our compound.

As long as I was outside I borrowed Butch’s metal detector and went in search of a couple of tie downs that Joe told us were buried somewhere near the outer edge of our patio awning.  I knew they were lined up with a reference mark on one of the concrete patio slabs and it did not take long to locate and uncover them.  We put a couple of medium-sized rocks on top of them so we could relocate them easily.

We got several multimedia messages from our son today with pictures of our grand-daughter at our daughter’s house helping make cookies.  Brendan, Shawna, and Madeline are spending the night and Katie is joining them tomorrow.  Butch and Fonda will spend most of the day at the local church Fonda selected, including a carry-in (pot luck) luncheon, but will have dinner with us around 6:30 PM.

I finally returned to our coach and worked on my article about the Zena power generating system I installed to charge our house batteries while driving.  Again, the article was mostly finished a long time ago, but I could not submit it until I completed the installation, got the system operational, and took a few more photos.  All of that happened in October and November but I was too busy with other projects and preparations to pull it all together at that time.  I had a couple of e-mails today from Gary, the publisher of Bus Conversion Magazine, indicating that the December 2014 issue might not be out until early January 2015, and wondering if I might have a finished article they could use.

For dinner Linda made a salad of dark mixed greens with raisins, nuts, and pear slices drizzled with raspberry walnut vinaigrette dressing followed by pan-seared tofu slices with caramelized onions and bar-b-que sauce served open-faced on hamburger buns.  We split a Sam Adams Pumpkin Spice Ale.  I am not a big fan of ales or pumpkin but beer seemed like the right beverage for this dish.  It was OK, but I would have enjoyed a Yingling or Shiner Bock more.

I made good progress on both articles today.  I got an e-mail from Mike, the editor of BCM, wondering if I had a finished article.  The ZENA article was close enough that I decided to finish it and upload it to our Dropbox before going to bed.  I e-mailed Mike back to let him known it was there and offered to finish the other one by the end of the weekend.

Earlier in the day I updated our personal WordPress site to the just released version 4.1 and updated several plug-ins and themes.  My last task before turning in for the night was to replicate the update process on the other three sites I manage.  By the time I got to bed it was Christmas Day.

2014/12/25 (R) Christmas in Q

The wind came up strongly overnight and we were awakened by the rattling of the vent fan domes.  From our north facing bedroom window we could see flags and the tops of trees blowing briskly in the wind.  We could also hear and see the awnings on the south/passenger side of the coach flapping.  Linda checked the weather channel app on her iPad and it reported winds at 20 MPH.  We were not expecting winds that strong until the daytime and they were strong enough for us to be concerned about our awnings.  By that point we were wide awake so we put on our sweatpants and shirts, slipped on some shoes, found a set of keys, got the step-stool out of the front bay and the awning rod out of the folding chair bay, retracted the two awnings, returned the rod and step-stool to their respective storage compartments, and finally went back to bed.

Linda got up at 6:30 AM in order to start making cinnamon rolls from scratch.  I usually get up first and make a pot of coffee but I was up past midnight working, so I slept in for another hour.  The yeast she bought yesterday wasn’t cooperating so we turned on one of the Broan ceramic cube heaters to try and create a warmer and more consistent environment to get the dough to rise.

We borrowed Butch and Fonda’s Verizon MiFi (unlimited data plan) so we could Facetime with our children and their families, who were gathered at our daughter and son-in-law’s house.  We got to watch all of them open the presents we left for them when we were there on Thanksgiving and they got to watch us open the gifts they sent with us or shipped to us here in Quartzsite.

Brendan, Shawna, and Madeline (son, daughter-in-law, and grand-daughter) sent a 2015 Shutterfly Calendar with photographs of all the different family members placed on the dates for birthdays, anniversaries, and such.  We do not need much at this point in our lives, but a collection of photographs that also reminds us of the people and dates that are most important to us is something we appreciate and treasure.  Meghan and Chris (daughter and son-in-law) bought us each a genuine Tilley hat.  I have known about these hats for a while but never bought one.  Given our outdoor oriented RV lifestyle, these were excellent gifts.

After we were done with our Facetime session Linda took the cinnamon rolls over to the apartment to bake since it has a range with an oven.  She will finish cooking dinner there later and the four of us will eat there this evening as it has a table that will seat four people.

The apartment bedroom.

The apartment bedroom.

In spite of early indications to the contrary the cinnamon rolls rose and baked just fine. The dough used flour, salt, vegan butter, yeast, and flax meal with water (egg substitute) and a little sugar.  The filling was made with brown sugar, vegan butter, cinnamon, and maple syrup.  The topping was a glaze of sugar, water, and vanilla with raisins and chopped walnuts.  Linda took two of them over to Butch and Fonda and we had some for breakfast still warm from the oven.  It’s a good thing that these are as much work to make as they are or I might want them for breakfast every day.   🙂

Linda had a call and TXT message from her sister (Marilyn) and sent a reply.  She was on her way to her housemate’s family gathering and they agreed they would talk later today.  She also sent merry Christmas TXT messages to her sister-in-law, Mary, and good friend, Diane.  At noon our time (1 PM CST, UTC-6) I called my sister to wish her a happy holiday.  Her daughter, grand-daughter, and future son-in-law had already been there in the morning as Ryan had to work that afternoon.

I made a second pot of coffee, which is unusual for us, but we planned to spend the day lounging around the coach cooking (Linda) and working on the computer (me).  Linda cleaned up the breakfast cookware, poured another cup of coffee, and started working on the chocolate cake for tonight’s dessert.  With the cake prepared and in the apartment oven she turned her attention to making the candied yams.  Once those were done the only thing left to do was bake the Tofurkey, roast the asparagus, and heat the gravy.  It was a lot work for her but it was spread out over two days and she enjoyed, and did it, willingly.  We could have gone out for dinner if she wanted, even though we would not have found much we could eat, but I am glad she preferred to cook.

Once I wrapped up the conversation with my sister I got back to work on the Outside Makeover (Exterior Renovation) article.  Although I thought I was done writing I made a few more edits and selected additional photos.  By 5 PM I had 74 photos selected and placed in sequence to match the flow of the article.  I had also done as much of that work as I cared to for the day.

We were down to 1/4 tank of fresh water so I decided to refill it.  About that same time Linda decided it was chilly enough in the apartment that she wanted the propane space heater turned on so I shut off the water and took care of that.  The heater had a hose that went through the wall at floor level to the outside with a regulator and POL fitting on the end of it.  I found a couple of 20 lb. propane tanks in the workshop and connected one of them to the regulator.  It took a while but I eventually got the pilot flame to light and then got the heater to ignite.  I then went back and finished filling our water tank.

The little apartment is very cute with three rooms: a bathroom on the east end, a bedroom on the west end, and a kitchen/dining/living room in the middle.  It has a shower, a 4-burner electric range with an oven, a refrigerator/freezer, a small microwave oven, the aforementioned space heater, a small window air-conditioner, a small TV/monitor with a satellite receiver, two easy chairs, a small dining table with four chairs, and a queen sized bed.  Marilyn is seriously considering coming for a visit the last week of January and if she does she will stay in the apartment and get to experience Quartzsite.

Linda starting to set the table in the apartment for Christmas dinner.  No pictures of Butch & Fonda (they are camera shy).

Linda starting to set the table in the apartment for Christmas dinner. No pictures of Butch & Fonda (they are camera shy).

We bought a bottle of Sternthaler Nurnberger Christkindles Gluhwein spiced red holiday wine at Central Market in Fort Worth, Texas to serve with our Christmas dinner.  It is a mulled wine that is supposed to be gently heated before serving, but we found it quite agreeable straight from the refrigerator.  About 20 minutes before dinner time we set it out on the counter to warm up slightly, the space heater doing a very effective job heating the small apartment even on its lowest setting.

Linda and Fonda both contributed dishes to the meal and Fonda made a couple of things that we could eat.  They brought chicken and traditional mashed potatoes for themselves but also tried some of the Tofurkey roast.  Linda made a vegan chocolate cake for dessert and whipped refrigerated coconut milk solids to use as a whipped cream substitute.  Our daughter did this for the Thanksgiving meal and we really liked it.

We sat in the apartment for a long time after dinner and just talked until we were all tired.  Linda and Fonda had already cleaned the dishes so we turned off the propane space heater and carried all of our stuff back to our coaches.  Linda put the leftovers away while I did a final check of my e-mail for the night.  I then shut my computer off and we headed to bed.  Like so many things in our retirement RV lifestyle, this Christmas holiday was a new and good experience.

 

2014/12/17-20 (W-S) Second Winter Birthday

2014/12/17 (W) Clammy Q

The first rain came last night at 11 PM as forecast.  It then rained off and on through noon today and we had little pools of standing water in low-lying areas, an unusual site here in Quartzsite.  The cloud cover remained complete into the early afternoon, keeping the coach slightly chilly, but we just dressed accordingly.

Linda went for a morning walk and then spent part of the morning making broccoli, cauliflower, carrot soup.  She served some for lunch along with vegan grilled cheese and tomato sandwiches (on sourdough bread) and fresh grapes.  She went for another walk after lunch.  Butch and Fonda left around 9 AM for her women’s bible study group and did not return until 2:30 PM.

Kuehn Street market area looking west towards Central Avenue (US-95).  Quartzsite, AZ.

Kuehn Street market area looking west towards Central Avenue (US-95). Quartzsite, AZ.

I spent the morning and the early part of the afternoon researching products for testing water hardness, checking-in to a few social media websites, updating our calendar, and continuing to clean up my e-mail accounts.  Getting all of my accounts cleaned up is going to take weeks as I can only spend so many hours a day on this task before I need to do something else.  Mid-afternoon I got our sewer hose out and connected it.  I unscrewed the pressure gauge on our Valterra water pressure regulator, which has been stuck on 60 PSI for quite some time, and took it with me to Big Market to make sure the threads were the same before I bought a replacement.

When I got back I put a couple of wraps of Teflon tape around the threads, screwed it in by hand, and snugged it down with a pair of adjustable pliers.  I turned on the water supply and the gauge registered ~35 PSI with no leaks.  I adjusted the regulator pressure up to 45 PSI and called it good.  It is an inexpensive gauge, not liquid filled, but it will do for now.  I doubt that the old gauge can be repaired, but I will let Butch look at it before I throw it away.  When we eventually redo the water bay I plan to install better gauges as part of a coach-mounted plumbing system.  The reason to have one at the spigot, however, is to protect everything downstream from excessively high water pressure, including the hoses.

The name says it all.  Located in Tyson Wells near Prospectors Panorama and the "Big Tent".

The name says it all. Located in Tyson Wells near Prospectors Panorama and the “Big Tent”.

Linda was outside reading when I left to go to Big Market but thicker clouds moved in from the west and it got too chilly to sit outside comfortably.  We spent a quiet afternoon on the sofa with our cats and watched the skies darken as the afternoon advanced towards sunset.  By 4:30 PM it was raining lightly again and a beautiful mist hung over the mountains to the southwest and west.  Even though we are in the desert the humidity has been quite high on these cool, cloudy, rainy days.  The conditions have not been uncomfortable, just unexpected.

Connie returned home with Joe at 5:15 PM but we did get to meet him because of the rain.  He has been in a care facility in Blythe, California recovering from a scorpion sting so this was the first time he has been back in Q since we arrived.

Linda made a slightly fancier salad for dinner and served it along with the soup she made earlier in the day.  Both were delicious and the soup really hit the spot on a cool and unusually clammy day in Q.  Hot tea was also much appreciated.  After dinner we had a quiet evening at home.  Linda read while I worked at my computer.  The seating in the coach seems less comfortable this year compared to last winter, or at least we are more aware of it, and we finally went to bed when we could no longer sit comfortably.

Some of the vendor tents in the Tyson Wells market area on the south side of Kuehn Street.

Some of the vendor tents in the Tyson Wells market area on the south side of Kuehn Street.

2014/12/18 (R) Schmoo Is Two

Today was grand-daughter Madeline’s 2nd birthday.  It’s the first birthday where she is aware that it is a special day and the specialness has something to do with her.  Of course at her age every day is a special day and has something to do with her, but this one is more specialer.

I shut my computer off last night before I went to bed.  I don’t always do that, but I do occasionally.  It’s a habit leftover from my Windows XP Pro days when I’ll-behaved programs that did not conform to Microsoft’s programming rules would fail to release memory and eventually the machine would run out and stop working correctly.  The fix was to do a full power off shutdown and restart it.  When I started it this morning it installed updates, although it did not indicate last night that there were any to install.

One of the things I did yesterday morning was get us registered as staff for the Escapees RV Club Escapade rally in March.  After leaving messages on Monday and Tuesday for Kim, as instructed in an e-mail I received, Tamika (who answers the phone) indicated that she could handle the registration.  I then got online and placed our Escapade clothing order.  Hopefully it gets shipped to the rally venue, and not to our house in Michigan, as again the website did not match the instructions we received.  I was glad to have these taken care of and checked off of my list as I find it a bit frustrating (irritating?) when I decide to do something and then cannot get it done.  Just because we are retired does not mean we have nothing to do or all the time in the world to not do it.

View looking west of our coach and site in the late afternoon sun.

View looking west of our coach and site in the late afternoon sun.

Breakfast was homemade granola with fresh blueberries and bananas, spicy V8, and coffee.  Even though it was overcast and cool Linda went for her morning power walk.  Besides the exercise (10,000+ steps per day) she enjoys having the time to herself and it helps her get familiar with the layout of a new place.

We did not interact at all with Butch and Fonda yesterday.  Not that we needed to; by the time we pull out of Q in early March we will have been traveling/camping together for over three months.  Add to that the fact that I was living at their house for much of October and November working on our bus, and theirs, and I can understand why they might want some time to themselves.  They left early in the morning yesterday, so Fonda could attend a women’s bible study group, and did not return until mid-afternoon.  They looked at something in their engine bay, presumably the air-compressor, and then retreated to their coach and we did not see or hear them the rest of the day.

Joe was out this morning on his power chair picking up after their miniature schnauzer Otis so we went outside and introduced ourselves.  Butch came out soon after that, followed by Fonda and the dogs.  We all stood (or sat) around and had a nice long chat.  Connie eventually came out on her power chair with a basket of laundry.  I carried that over to the laundry room for her and after she loaded it in the washing machine she joined the conversation.

Joe wanted to run some errands and Butch offered to drive him around so we took our car and went on an ‘explore.’  We found the Post Office annex on Plymouth Avenue, which is just a couple of trailers with P. O. Boxes but no counter service.  I did not even notice a place to drop off outgoing mail.  Quartzsite has two ZIP codes and there is some confusion regarding which one to use when.  We do not expect to receive much mail while we are here, nor do we expect to receive a lot of UPS shipments, but we will probably need to receive a little bit of each and they need to be addressed correctly in order to get to us.  We may end up using General Delivery for mail, as the Quartzsite Post Office does not have rural delivery (they do not deliver mail to street addresses), whereas UPS does deliver to street addresses, but they have to be correct.  We plan to go to the main post office “downtown” tomorrow and clarify the situation.

Partial view of our winter compound looking north.  Our bus is to the left and Butch & Fonda's MC-9 is to the right.  Look carefully and you will see someone napping.  And why not.

Partial view of our winter compound looking north. Our bus is to the left and Butch & Fonda’s MC-9 is to the right. Look carefully and you will see someone napping. And why not.

We drove south on Riggles Avenue across I-10 at exit 19 to Kuehn Road and headed east in search of the location where the SKP gathering will be held.  Kuehn becomes Dome Rock Road (east and west) as you head out of town into the desert.  The 4-mile mark coincided with the end of the pavement and one of the BLM STVAs.  We turned south and drove another mile into the desert on a freshly graded dirt road before turning around.  The dirt road was actually better than the crumbling pavement, which is clearly not being maintained.  We then headed back to the area of Kuehn Street, to either side of AZ-95, where most of the seasonal vendors are (will be) located.

We had some Indian Fry Bread for lunch and it was both tasty and filling.  Linda had cinnamon and granulated sugar while I had honey and powdered sugar.  We walked the whole area and at least peaked in each tent while spending a bit more time with a few vendors.  We were going to walk past the Beef Jerky shop but the lady proprietor started chatting with us.  As it turned out she was a vegetarian and had a nice selection of non-animal products.  Which just goes to prove the old adage “you never know.”

Linda got a TXT message from our son letting us know that our grand-daughter was home from day care so we headed back to the coach.  We borrowed Butch and Fonda’s Verizon Jetpack MiFi and used it to Facetime with our son, daughter-in-law, and grand-daughter.  (Their MiFi has an unlimited data plan; ours does not.)  We got to wish Madeline a happy birthday and watch her open her present from us.

View looking south on Lollipop Ln from the entrance to our compound.

View looking south on Lollipop Ln from the entrance to our compound.

When Linda returned the MiFi device on her way to her second walk of the day Butch let her know that Joe and Connie wanted the six of us to go out to dinner, so she planned her walk to be back in plenty of time.  Joe suggested we try the Main Street Eatery as they have a garden burger on the menu that he likes.  It turned out to have cheese mixed in with the patty so we did not get one but Linda had a brown rice and veggies dish and I had French fries with ketchup and Tabasco sauce.

In a reversal of our normal routine, I was tired and went to bed early while Linda stayed up reading and playing her online spelling games.

2014/12/19 (F) Hasta La Vista

When we were at the Walmart in Parker last weekend we looked for holiday cards but all they had was a limited selection of Christmas cards.  The last few years we have done a “year in review” letter with captioned photos and short blurbs about each month.  We did not bring a printer with us so Linda searched for places that could print this for us and found one in Blythe, California.

Quartzsite is in the Sonoran Desert and many of the properties have Sugauro Cactus.  Palo Verde and Greasewood bushes are also common with some smaller cactus, but no lawn grass.

Quartzsite is in the Sonoran Desert and many of the properties have Sagauro Cactus. Palo Verde and Greasewood bushes are also common with some smaller cactus, but no lawn grass.

Breakfast was spicy V8 juice, cinnamon raisin toast, sourdough toast with orange marmalade, and coffee.  At dinner last night at the Main Street Eatery the waitress/owner, Michelle, mentioned that a Smart & Final (Extra) store had opened in Blythe and she was excited to have one so close to Quartzsite.  Blythe is only 20 miles away; about half the distance to Parker and a quarter of the distance to Yuma.  Although it is a non-membership warehouse store she said they also have a lot of good quality fresh produce.  We were prepared for Quartzsite to be challenging for us food wise, but so far it has been OK and is looking up.

Linda went for her morning walk and while she was out I strolled down to Herb’s Hardware in search of a piece of plastic pipe with an appropriate inside diameter for fabricating the insert I need for recharging our water softener.  Although Big Market is a good place for this kind of general purpose hardware I went to Herb’s because it is on Central Avenue (AZ-95) not far from where we are staying.  It was small but well-stocked.  I did not find exactly what I needed, of course, but I found something that might work.  It was worth $2.50 to find out.  The problem is that I am looking for a part that does not exist so I have to repurpose/fabricate something using whatever tools I have with me, can borrow from Butch, or buy in town.

When I got back to the coach I spent much of the rest of the day working on our holiday letter with breaks for food and a little socializing.  During an afternoon break Butch and I disassembled my old, non-functioning, water pressure gauge so I could see how it works.  For lunch Linda served the leftover fajita veggies and seitan over basmati rice, which was yummy.  For dinner she made a tomato, mushroom, onion ragu with a little broccoli thrown in and served it over half of a baked potato.  It was very satisfying on a cool evening.

'Q' is criss-crossed with "washes" (drainage ditches) that are usually dry and used by ATVs.  This is one of the smaller ones, but is big enough for a full-size SUV.  When the flash floods come (springtime) these washes fill and flow fast and a dangerous.

‘Q’ is criss-crossed with “washes” (drainage ditches) that are usually dry and used by ATVs. This is one of the smaller ones, but is big enough for a full-size SUV. When the flash floods come (springtime) these washes fill and flow fast and a dangerous.

Joe and Connie’s son, Dale, and other family members drove down from Nevada after work today and were expected to arrive sometime after midnight.  The plan was to pick up Joe and Connie, load their minivan into the “toter,” and head back; a nine hour trip each way.  Given that plan we did not get to meet Dale, et al, and said “farewell, see you later” to Joe and Connie before we all turned in for the evening.

2014/12/20 (S) Yuma, AZ

Yesterday Butch suggested we that we drive to Yuma today so that is what we did.  Quartzfest, the RV/ARO gathering, takes place the last full week of January at the BLM Road Runner STVA near mile marker 99 on US-95 south of Quartzsite.  We wanted to find that location and just see the desert south of town.  Joe had also suggested that we take the Old Yuma Road down to La Paz.  Linda had found the road on her iPad yesterday and what looked like a small community about four miles out, but the community was not named on the map.  From Kuehn and Central it looked to be a five mile hike, if we were inclined to walk it.

I tried logging in to the Prevost Community (PC) website last night but our login did not work.  I contacted the site administrators and had two e-mails waiting for me this morning with the info I needed.  I logged in and posted some information and a question about our turbo boost and dashboard gauge and searched the site for posts about the Level Low system.  I also checked the Prevost Owners Group (POG) website but there seemed to be more information on PC about older H3s and 92 series Detroit Diesel engines.

Map of the Yuma, AZ downtown / historic area.

Map of the Yuma, AZ downtown / historic area.

Connie called around 8:30 AM and asked me to take care of a couple of things at the site, which I did.  We left for Yuma at 10:15 AM and drove south on US-95 through 85 miles of mostly scrubby desert surrounded by mostly barren mountains until we got near Yuma.  Much of the drive was through BLM administered land and part of it was through the U. S. Army Yuma Proving Grounds.  The area around Yuma was unexpectedly green but we learned that the area grows more leafy greens during the winter months than anyplace else on the planet

By the time we got into town and got our bearings it was time for lunch.  We spotted a Golden Corral and Butch assured us they had a nice salad bar, and probably other things we could eat, so we went there.  We all ate too much, which is one of the reasons we rarely go to buffets of any kind, but the food was OK and we did have quite a variety to choose from.

Butch was feeling a bit sleepy after lunch so I drove us down to the Quartermasters Depot Historic Park on the Colorado River.  The other side of the river was California, the closest we have been on this trip, but we did not cross over the bridge.  We spent some time in the visitor information center reading about the depot and picking up literature for various area attractions and activities but did not pay the $4 per person admission and go in.  We then drove around to the parking lot for the Yuma Territorial Prison Historic Park but did not park the vehicle and get out.  Admission is $6 per person and we will come back another day (and leave earlier in the morning) so we have time to visit these and other sites.

Historic Quartermaster Depot State Park.  Note that the cover of the wagon says "AT" (Arizona Territory).

Historic Quartermaster Depot State Park. Note that the cover of the wagon says “AT” (Arizona Territory).

While we were driving back to Q we both got messages on our smartphones from our son with pictures and video of our grand-daughter Madeline’s birthday party.  All of her aunts and uncles and cousins were there and she was having a wonderful time.  While we would like to be present on such occasions there are choices to be made.  We have discussed celebrating Madeline’s “half birthday” each year on June 18th as we will likely be home at that time of year.

Scenic travels notwithstanding, chores still have to be done.  When we got back to camp I dumped the waste tanks, which were near full, and topped up the fresh water tank which was at approximately 40%.  The last time we dumped was a week ago Thursday at the SKP Dream Catcher RV Park in Deming, New Mexico so we went nine days without being conservative in our use of water.  We did top up the fresh water tank shortly after we arrived in Q with approximately 50 gallons of softened water and today I added approximately 75 gallons (60% of capacity).  Although it is not essential, I like to fill the fresh tank whenever I empty the waste tanks.  Our waste tank level gauges do not work but the fresh water tank gauge does, so it gives us an approximate idea of the state of the waste tanks.

As long as I was doing water chores I borrowed another Hach SofChek test strip from Butch and checked the hardness of the water coming out of the water softener.  It registered between 1.5 and 3 grains per gallon (gpg).  The water coming out of the spigot is testing at 25 gpg, the highest amount the test strips can register, so the softener now appears to be doing its job after having been recharged.  Linda recorded the details in the notepad we are using to log these things.

Butch did a minor upgrade on their ITR Oasis Combi hydronic heating system that should make a big difference in their comfort.  He cut out 15″ sections from the rigid metal supply and return fuel lines and replaced them with rubber fuel lines.  The rubber lines will isolate the unit, which is mounted to the floor of the bay, from the plywood ceiling of the bay to which the metal fuel lines are clamped coming back from the fuel tank.  The plywood ceiling is also the house subfloor and the pulsing of the fuel pump was being telegraphed throughout their coach.  The rubber lines greatly reduced the noise.

A view of the Quartermaster Depot SP.

A view of the Quartermaster Depot SP.

Linda called Brendan back and we got a chance to sing “happy birthday” to Madeline.  She also got to call her sister (Sister Marilyn) and chat for a bit.  Marilyn is considering flying down for a visit and staying in the guest apartment but we are unsure yet of the timing.  Speaking of flying, Linda booked her flight home and back yesterday.  She will fly home from Phoenix on February 17 to take care of various tax returns and bakery accounting details and fly back on March 1st.

We had a quiet evening at home.  Because we had such a big lunch we did not have dinner, as such, just a little hummus with some chips and a small glass of Leelanau Cellars Winter White wine.  Linda read and I worked on selecting/editing photos for our 2014 year in review holiday letter.

 

2014/12/09-12 (T-F) On to Q

2014/12/09 (T) Elvis Is Not Dead

No, indeed, Elvis is alive and well and living in Alvarado, Texas with his owner, Donn and fellow dog Lucy.  Sweet animals both, we enjoyed their presence while visiting with Donn.

We heard Donn pull out a few minutes before 5 AM, in an attempt to beat the worst of the morning rush hour traffic headed into Dallas, but we were not ready to get up.  I think we finally piled out of bed around 7:30 AM to find that the fog was so thick we could not see the road at the end of Donn’s driveway.  We had targeted 9 AM as a departure time that would have us miss most of the morning traffic, and actually pulled out of our parking spot at 9:11 AM.  The fog was still thick but it was bright enough that we could usually see at least a quarter of a mile in our direction of travel.

We worked our way back onto northbound I-35W towards Fort Worth and kept to the right in spite of entering traffic.  We chose not to stop at the QT (Quick Trip) even though Diesel fuel was $3.08 per gallon, the least expensive we have seen in years.  The transition to I-20 westbound was via one of the very high ramps that are used to connect intersecting freeways around the Dallas / Fort Worth metropolis, but it was not a problem.  We continued to drive through fog for at least 90 minutes, so we could not tell you what Texas west of Fort Worth looks like if had to.  We stayed on I-20 all the way to Midland, Texas only stopping to fuel up at the Flying J Truck Stop on the far side of Abilene, Texas by which point the fog had lifted and it was partly sunny with temperatures in the upper 60s.  Eventually, however, the clouds closed back in, which made the last 90 minutes of the drive a bit less bright and easier on the eyes.

The bus ran well all day and I did better at getting on the accelerator in advance of climbing grades, spinning up the turbocharger and keeping the engine RPMs in the 1900-2000 range.  The bus took 98.135 gallons of fuel at the truck stop and we had traveled 553.8 miles since the last fill-up for an average of 5.64 MPG.  That included running our generator at the Wal-Mart in Texarkana, Texas on Friday. Our previous fill-up computed out at 5.45 MPG.  In our previous use of the coach I figured we were getting 6.0 MPG, but we had not done as much dry-camping as we did on this trip.  We have used the generator and the Aqua-Hot on this trip, both of which draw fuel from the main tank.

The only issue I had today was with the dual pyrometers, specifically the right one.  Historically the right pyro has read 50 – 100 degrees F higher than the left one, which would often stick on “0” and then swing up if I tapped on the gauge.  Both gauges have been tracking within 50 degrees since I rechecked the DDEC II connectors, but today the right gauge started lagging behind the left one, sometimes by a couple of hundred degrees.  If that difference was real it would be a real problem, but everything else looked, felt, and sounded OK, so I think this is a continuing problem with the instrument, and/or sensors, and/or wiring and connectors, but I will have to keep an eye on it.

A half hour before the GPS said we would arrive Linda tried calling the Wal-Mart in Midland several times but never got an answer.  We exited at Midland just before 3 PM and did not have any problem getting into the Wal-Mart parking lot which was very convenient to the freeway but relatively busy for that time of day on a Tuesday.  Not surprising, though, as Midland is the epicenter of the current oil and wind boom in west Texas.  The stretch of I-20 from Fort Worth to Midland is not desolate.  Sweetwater is the wind power capital of the USA, and all along I-20 there are “RV Parks” on both sides of the freeway.  Some of them were genuine, nice looking, RV Parks but most were makeshift looking places that appeared to have been created quickly to service (take advantage of?) a sudden need for places to park almost anything that might serve as shelter for energy workers.

As always, we checked with Customer Service to make sure it was OK to stay overnight.  They said it was but twice told us to “be careful.”  The warning had to do with leaving our vehicle for an extended period of time and risk having it towed.  Apparently “extended” meant weeks, not hours, and I assured them we would be gone first thing in the morning.  While we were in the store we picked up several bottles of PineSol and a couple of boxes of Calgon bath beads.  We prefer the larger, cylindrical plastic containers of Calgon but rarely find them in retail stores and pharmacies.  After we carried everything back to the coach I went for a walk to confirm our exit options for tomorrow morning.  We looked at satellite images on Google Maps last night so I had a good understanding of the parking lot and access roads, but I wanted to verify that information while it was still daylight.

For dinner we had a nice salad, a fresh apple, and Tofurkey brand turkey and vegan cheese sandwiches.  We were going to have the leftover chili from last night’s dinner, but the microwave and the Magnum charger are on the same leg, and the microwave acts like it is going to self-destruct if we try to use it while the charger is also drawing a large amount of current.  I may try moving the circuit breaker for the microwave to a position in the sub-panel that puts it on Leg 2 and see if that helps, but I have to maintain a reasonable load balance between the two legs.  It may be, however, that the microwave is more sensitive to a reduced voltage level than the other high power devices or things like lights or entertainment equipment, which just converts the AC to DC internally anyway.

I called Butch before dinner and they were still on the road in New Mexico.  He called me back after our dinner to let me know they were in a rest stop on I-25 and had the place to themselves.  By comparison, the Midland Wal-Mart was a busy place and most of the vehicles (drivers) seemed to find driving up and down the aisles to be a great inconvenience.  Instead, they took straight line paths across the parking lot, driving between closely spaced parked vehicles (including buses) at surprisingly high speed and didn’t always stop to see if another vehicle might be driving in the lane (where it belongs).  There was a Murphy USA filling station on the property, as well as a McDonalds, which contributed to the constant flow of traffic.

Butch had talked to Luke at U. S. Coach earlier today and got prices for the parts he presumes he needs to repair the main engine air-compressor (Bendix Tu-Flo 700 series) on their bus or replace it with a factory rebuilt one.  Either way the work will wait until we get to Quartzsite, Arizona.

We had a good a Verizon 4G/LTE cellular signal so I sent TXT messages to Donn and Chuck letting them know where we were and ended up having brief TXT message exchanges with both of them.  When we first arrived Linda sent TXT messages to both of our children updating them on our location.  We received messages while we were driving that our older grand-daughter, Katie, had been accepted to Michigan State University.  She applied to three state schools and Michigan Technological University was the first to accept her.  She is waiting to hear about a scholarship from them but knows for sure that she will be going to college somewhere in the fall of 2015 and will have to make a choice as to where.

2014/12/10 (W) Dream Catcher

We went to bed early last night knowing we planned to drive over 400 miles today and wanted to get an early start.  I was awake by 4 AM and finally got up at 5 AM.  The parking lot had thinned out and quieted down overnight but even at that hour tractor-trailer rigs were coming and going.  The house batteries were at 95% SOC when I turned the generator off at 8:45 PM last night and were at 70% SOC when I turned it back on when I got up.

Although I do not like to eat a big breakfast and drink coffee on days that I have to drive, I also do not like to travel too long on an empty stomach.  I have also noticed that lack of liquids can lead to a headache or general feeling of unwellness.  I was up early enough that I had a piece of raisin bread, a banana, and a small glass of grapefruit juice with time to digest it before we hit the road.

Linda got up at 5:30 AM and we started preparing the bus for travel at 5:45 AM.  We pulled out at 6 AM, using the route I had scoped out last night to work our way around behind the Wal-Mart and onto the service drive for I-20 and get position for the freeway entrance.  Once we were on the Interstate it was dark, of course, but it was also foggy.  In spite of those conditions traffic was heavy until we were well past Odessa.  Midland and Odessa are at the center of the current Texas energy (oil and wind) boom and between them are spread out along 30 miles of I-20.  I was definitely not the most scenic part of our trip to date.

The fog stayed with us almost to where I-20 ends and merges with I-10.  We drove through it for hours.  The rest of the day was a mix of sun and clouds.  The bus generally ran well but the turbocharger did not seem to be as responsive as it should be.  I continued to do better at anticipating grades and getting the engine RPMs and turbo boost up ahead of time but noticed that the turbo boost was not peaking off the scale the way it used to.

The speed limit on I-20 yesterday between Fort Worth and Midland was 75 MPH.  That continued through Midland and Odessa but once we were past Odessa it went up to 80 MPH.  I usually travel 60 to 62 MPH when the speed limit allows it but for stretches of today’s trip I set the cruise control at 65 MPH and sometimes traveled at 70 MPH.  Texas is a big place and west Texas is vast.  The speed limits are this high because it is safe to drive that speed out here, and you just have to go faster if you want to get across west Texas in any reasonable amount of time.

Towards the end of I-20 and once we were on I-10 the terrain became rolling and then slightly mountainous and was very pretty in a southwestern desert kind of way.  At some point we notice very large mountains off to the southwest.  Just before reaching El Paso we were very close to the Rio Grande River and realized that the mountains were now very close on the Mexican side of the river and were very large and very rugged.  I-10 through El Paso, Texas was an experience unto itself as there was road construction along its entire length for what seemed like endless miles.  On the other side of El Paso we had to stop at a Homeland Security check point where we went in with the trucks by mistake but got waived through.  Whenever I am unsure about overhead clearances I stick with the big rigs.

We continued on I-10W into New Mexico where it was joined by I-25 in Las Cruces and completed our run to Deming.  We pulled into the Escapees Dream Catcher RV Park at 11:50 MST, just shy of 7 hours after we pulled out of the Wal-Mart in Midland, Texas.  We had traveled 407 miles at an average speed of 58 MPH which was faster than our usual 50 MPH average.

Butch and Fonda were already checked-in to the RV Park and we took one of the sites next to theirs’.  They had developed an apparent chassis battery problem and Butch was trying to sort it out.  I got the shorepower hooked up while Linda prepared lunch.  She made open faced chili cheese dogs with some tofu hotdogs and the leftover chili from Monday night.

Butch needed a new battery for their Suburban so I rode with him to the local Wal-Mart.  He had them install it (no extra charge) but had to teach the “technician” how to do it.  He was also scoping out batteries for the bus but Wal-Mart did not have the Group 31’s he was looking for.  We stopped at both O’Reilly’s and NAPA auto parts stores and got prices then went back to do some additional diagnosis.  Butch suspects a shorted cell but has not confirmed that.

Linda suggested that I connect the sewer hose and fresh water line while it was still daylight with comfortable temperatures so that is what I did.  I decided to check out the two pyrometer sensors.  In the process I “discovered” a metal plate with an electrical harness plugged into it and a fitting for a hose but with only a small piece of hose attached to the fitting.  Butch identified the plate as the turbocharger boost sensor.  I found the loose end of the hose and followed it back to turbocharger outlet manifold.  That explained why I was not able to get the turbo boost and engine power I expected from the engine.  The hose was incredibly brittle and had to be replaced; not good.  We discussed options and appeared to have two: 1) Attach a new hose to the sensor tube and then try to splice it into the old hose, or 2) get a new barbed fitting for the manifold and run a new hose from there to the sensor.  We drove back to the NAPA store and got the parts we might need.

Butch removed the old fitting from the intake manifold and decided we could re-use it.  It took some doing but he got it installed.  We routed the new hose (fuel injector rated) to the sensor plate and connected it.  I could not figure out how to mount the plate so I left it sitting behind the computer on top of the engine where I found it.  I do not know if the old hose has been broken for a while or if it finally failed this afternoon when I grabbed it, but either way it was certainly leaking and was another potential disaster averted.

For dinner Linda made a nice green salad and pan-grilled tofu slices with Bar-B-Que sauce and caramelized onions.  After dinner we took advantage of our full hookups to take showers and get additional water in our waste tanks.  We watched an episode of Nova on the local PBS station and then went to bed.  Both sides of the air mattress were very hard.  When we checked the settings, my side was at 50 and Linda’s was at 85, both much higher than we usually set them.

The thought crossed my mind that the cats might have stepped on the controls, but that seemed unlikely as the buttons are slightly recessed and have to be pushed in to activate the system.  Besides, the odds of them stepping on the controls for both sides of the bed were very small.  Linda made an off-hand comment about altitude and I realized immediately that this was the effect of having climbed from 765 feet above sea level (ASL) in Alvarado, Texas to 2,862 ft. ASL in Midland, Texas, to 4,300 ft. ASL in Deming, New Mexico.  I also realized in that moment why the tire pressures were higher than I expected when I checked the PressurePro TPMS this morning before we pulled out of Midland.  Sometimes that which should be obvious is not.  We reset the air mattress pressures and drifted comfortably off to sleep.

2014/12/11 (R) RoVer’s Roost SKP CO-OP

I was up at 6 AM after a good night’s sleep and Linda got up around 7 AM.  The overnight low was 38 degrees Fahrenheit, and we did not have any of the heaters turned on, so the front of the coach got a bit chilly.  We were parked facing east so the rising sun lit up the front of our coach and helped warm it up.  I checked on the house battery SOC and then settled in to write for a while.  We had a light breakfast of oatmeal and juice around 7:30 AM.  At 7:45 AM I turned on the engine block heater and Aqua-Hot pre-heat pump.  Linda gathered up the trash shortly thereafter and went for a walk.

I failed to mention in yesterday’s blog post that our grand-daughter Katie called Linda yesterday to let us know that she had received a full academic scholarship to Michigan Technological University in Marquette, Michigan.  We were, of course, very excited to receive this news.  Katie has been an excellent student throughout high school and we are confident she will do well at MTU if she decides to go there.

Fonda was out with their two dogs, Rascal and Daffy, around 7:30 AM but there was no sign of activity beyond that until 8 AM when Linda returned from her walk and said Butch was outside looking at their chassis battery situation.  I put on the hooded sweatshirt I use when I have to work outdoors in cool weather and joined them.

Butch had left the 24 VDC battery charger on the chassis batteries overnight.  Both batteries seemed to be holding an adequate voltage so he decided to swap them rather than replace the one that seemed to be a problem yesterday (lower 12 volts).  After disconnecting the cables we pulled both batteries out.  These are 8D lead acid (wet cell) batteries and weight ~160 pounds each.  Butch topped off the fluid level in all of the cells.  He then put the batteries back in place, reversing their position, and reconnected the cables.  We re-checked voltages and everything looked OK so Butch decided they were ready to travel today rather than spend another night in Deming.

Yesterday we had discussed driving to the Escapees Saguaro Co-op RV Park in Benson, Arizona.  Called them just before 5 PM and they said they had plenty of spaces available.  Linda was checking the details of the park online and discovered that they have a 40,000 pound weight limit, but no one at the park could explain why.  Further research revealed that the last 0.3 miles into the park might be a weight restricted road.

Benson would have been a short drive of just over 180 miles, leaving us a longer drive for Friday if we wanted to get all the way to Quartzsite.  Looking at the map it appeared that Casa Grande, Arizona, 280 miles from Deming, might be a better stopping point.  As it turned out, the Escapees (SKP) RoVer’s Roost CO-OP RV Park is located near Casa Grande and did not have weight restrictions.  Linda called to make sure they had space for us, and after consulting with Butch and Fonda decided that was where we would head.

Linda checked online for fuel stops and prices.  The best price was $3.15 at a Pilot/Flying J just 10 miles shy of Casa Grande, but I wasn’t sure we could comfortably make it that far with adequate reserves as we were already at 1/2 tank mark on the fuel gauge.  I dumped our waste tanks, stowed the hoses, turned on the chassis batteries, opened the various air valves, disconnected the shorepower cord, and stored it.  We secured all of the bays and then hooked up the car for towing.  When Butch and Fonda were close to being ready we fired up the bus engine and checked the exterior lights.

We pulled out of the SKP Dream Catchers RV Park at 10 AM with our first stop planned for a Flying J Truck Stop about 60 miles west of Deming.  We had a good run on I-10 across the rest of New Mexico and into Arizona, exiting onto I-8 about 13 miles from the RoVer’s Roost RV Park.  The bus ran like it had a new engine.  The turbocharger was very responsive to the accelerator, producing more boost than I saw yesterday.  The engine had noticeably more power climbing grades, with the pyrometers reaching 850 – 900 degrees F and the engine coolant temperature reaching 195 – 200 degrees F.  Repairing the turbo boost sensor hose yesterday was clearly the right thing to do.

The scenery was beautiful and the largest city on our route was Tucson, which appeared to have a very nice downtown area.  The city was spread out for 30 miles from east to west and was not nearly as hectic as the drive through El Paso, Texas yesterday.  We arrived at RoVer’s Roost SKP CO-OP AT 3:15 PM MST with 3/4’s of a tank of fuel.

RoVer’s Roost is a very dense RV Park with closely spaced lots that are permanently assigned to co-op members and most of which were occupied.  The lots were all perpendicular to the long, straight, narrow roads.  All sites, including the boondocking area, were back-in which required us to unhook our cars.  The sites were also limited to a 40 foot long RV maximum, but many of them were “developed” in such a way that they would not accommodate a rig that long.  Registration took longer than it should have but eventually we were escorted to our site by a man in a golf cart who guided me as I backed into the site.  He had obviously done this many times and knew how to get a 40 foot motorhome into a tight space with limited room to turn so we were glad to have his assistance.

Once we were in our spot he escorted Butch and Fonda to their site and helped back them in.  Their bus developed an air problem after they pulled into the park, producing a squealing sound when Butch applied the parking breaks.  Butch had to bleed the pressure down to 30 PSI to get the noise to stop.  He re-pressurized the system and the noise did not reappear, so he put the Quadra Big Foot leveling jacks down.

I updated our recent locations in RVillage.  The four of us then went for a walk around the park to check it out and scope out our exit path.  We met a very nice lady resident who has painted a number of murals on storage sheds around the park and the ones we saw were very well done.  We returned to our coach and had dinner.  I had a TXT message from Chuck and called him after dinner to tell him about the turbo boost problem and solution.  We turned in early and watched a football game for a while before turning out the lights and going to sleep.

2014/12/12 (F) RR to Q

Today was our 13th day on the road since leaving home on November 30th.  We could easily have taken a month to do this repositioning, stopping along the way at more places for more nights and exploring each area, but we chose not to.  In part this was because we were caravanning with friends, and in part because we both had bus issues along the way and we were all anxious to just “get there.”

Pulling in to 715 Lollipop Ln in Quartzsite, Arizona.

Pulling in to 715 Lollipop Ln in Quartzsite, Arizona.

RoVer’s Roost has WiFi but we were not offered the use of it when we registered.  We had an excellent Verizon 4G/LTE signal, however, so I checked RVillage last night and realized that I had not updated our location since Alvarado, Texas.  In the span of just a few minutes I checked into Midland, Texas, the SKP Dream Catcher RV Park in Deming, New Mexico, and finally the RoVer’s Roost SKP CO-OP in Casa Grande, Arizona.  I posted a comment about this and drew a comment about “…living in the fast lane” and several “likes.”  RVillage is not only useful, it’s fun.

The park home page showed 11 check-ins, so I perused the list and discovered that Forrest and Mary Clark were apparently here.  I say “apparently” because, like our situation, the information is only accurate if the person has kept it up to date.  I sent Forrest a message and he replied that they were, indeed, at the park and provided their site number.  I did not see the reply until this morning, however, so I messaged him back and said we would stop by before we pulled out.  Like us, they are also headed to “Q” for the first time this winter.

I was up by 6:30 AM and made a half pot of coffee.  We have not been making coffee in the morning and really miss it.  We enjoyed our Teeko’s Cafe Europe Blend while watching a gorgeous sunrise, the first of many we expect to see.  The temperature had dropped to 50 degrees F overnight from the high of 76 yesterday afternoon; warmer than normal for this time of year.  RoVer’s Roost has recycling bins, so Linda gathered up the various packaging materials she has been saving and walked them over to the bins along with the trash.  She likes to go for morning walks and has missed doing so while working on the software conversion project for the bakery since mid-September.

At 8 AM the house batteries were at 93% SOC.  The last time they were at 100% was at the end of our stay in Alvarado, Texas where we sat for three night plugged-in to “50 Amp” shorepower.  The Magnum ME-ARC remote was showing 116-120 VAC in, which more closely matched the main panel gauges than I have seen recently.  I obviously have some investigating to do (voltage measurements) and need to revisit the manuals for the 4024 inverter/charger and its add-on modules.  As with everything on this coach, there is no magic involved, just basic engineering principles.  The problem comes when there is inadequate documentation on the construction of the systems, including their principles of operation and their specific interconnections.  That’s when the detective work begins and I have to be particularly cautious about coming to premature conclusions regarding all of this.  It is better to admit that I do not understand how something works than to assume that I do and turn out to be wrong (not that that has ever happened).

In my chat with Chuck last night he suggested that I might want to eventually replace the turbo boost (manifold) sensor hose with a silicon one.  The two hottest places on the engine are the exhaust manifolds and the turbocharger and this hose connects to the latter.  He planned to check the hose on his coach, which is the same type and age as ours, first thing this morning.  His coach has more miles on it than ours (we think) so this hose is likely to be in bad shape on his coach too.  At some point I would like to have the radiator re-cored and that would be the time to replace ALL of the coolant hoses, and anything else on the engine that is made of rubber, with new silicon parts if possible, or at least with new rubber.

Along those same lines we were discussing air-powered accessories last night.  We do not use the bedroom pocket door and I will probably disconnect it or add a shutoff valve.  The waste tank dump valves are also air-powered and I may do the same thing to them.  That would leave the toilet and the shutters for the two front air-conditioner condensers as the only devices that needs air to work while we are parked.  We like the air flush toilet—it is fairly water efficient—and we would keep it if we could eliminate air leaks to the point that the auxiliary air-compressor only runs a few times a day.  The other downside to the toilet, however, are the difficulty and expense of getting spare parts.  We are considering replacing it with a standard gravity flush “RV style” toilet when we redo the water tanks, hopefully next year.  That would greatly reduce the need to run the auxiliary air-compressor while we are parked.  It does, however, also help maintain the air pressure in the suspension system.

We walked down to Forrest and Mary’s site at 8:30 AM and they came out to greet us.  Precision RV pulled up just as we got there.  They are affiliated with AM Solar in Oregon and are installing a solar electric system on Forrest and Mary’s Foretravel motorhome.  They wanted to see our bus so we all walked back to our site.  Butch walked up and joined us and we had a long chat.  Several folks walked by and were very friendly which help mitigate our first impressions of the place.

While we were standing there the man who parked us yesterday drove by in his golf cart and also stopped to chat.  He and his wife have been coming to RoVer’s Roost since 2004 and help manage the park.  With the co-op you obtain a leasehold on a specific lot which is then yours to use until you move to a different lot or sell your leasehold.  The lots are not deeded; your leasehold buys you a fractional ownership of the co-op.  Leaseholds are currently $8,500 with a $500 annual maintenance fee, and many leaseholders are full-timers; their RV is the only home they have.  Under $10K for a place to live plus $500 in association fees and metered electric is not bad.  In the last few years many of the original residents, who built the park, have given up their RV’s for assisted living or passed away.  At the present time there are a few lots available and, for the first time in the park’s history, there is no waiting list.  The hope is that a new generation of retirees will discover the Escapees RV Club and the Rainbow Parks and SKP co-ops.

RoVer’s Roost is an odd place when you first see it, a kind of “RV oasis” in the dessert.  It’s a compact, low-walled, compound surrounded by endless miles of nothing; no housing, no industry, not even agriculture.  It turns out that such places are not uncommon in the southwest but it got me wondering why it was built here and why it was built this way.  I presume the reason for the location had to do with climate, land costs, and the willingness of local, county, and state agencies to allow it.

We learned that some of the reasons RoVer’s Roost is built the way it is had to do with it being the first SKP CO-OP and when it was built.  Construction began in 1981 and Escapees RV Club Founders Joe and Kay Peterson helped build it with their own hands and had a lot there for a while.  RV’s over 35 feet long were rare in those days.  Although 40 foot highway buses existed, such as the Eagle, and some were already being converted into motorhomes, many conversions were based on the 35 foot Flxible and GMC buses.  Pull-behinds (trailers and 5th wheels) were rarely longer than 30 feet, although there were exceptions.  The size of the lots, the width of the roads, and the tightness of the turns all reflect the RV realities of the time and provide a living example of how difficult it is to see into the future.

Another reason, I presume, had to do with the costs associated with building RoVer’s Roost.  Even if the cost of the land was negligible, doubling the size of each lot would have at least doubled the cost of the infrastructure.  Roads, electrical wire, fresh water pipes, sewer lines, and the perimeter wall would all have involved at least double the material and the associated cost.  The visit to RoVer’s Roost reminded me that I need to carefully consider the historical context of something before I can hope to understand it.

We targeted 10 AM as our departure time, but there was no urgency to our leaving as we had less than 180 miles to get to our winter home in Quartzsite.  Butch discovered the digital dashboard on the Rand-McNally RVND 7710 last night and called to let me know how to access it.  I vaguely recalled that it was there, having been to several seminars on the unit, but I had not developed the habit of using it.  I decided I would try it out on this last leg of our journey to “Q.”  One of its features is the display of elevation.  On the downside, it does not display the current posted speed limit, which is shown on the map view.

We prepared the coach for travel and I fired up the engine at 10 AM.  Linda watched to make sure I did not hit anything as I pulled out.  Once I was out of our site (#77) I drove to the end of the street and around the corner to a spot where we could hookup the car, which Linda drove down and positioned behind the bus.  I shut off the engine while we hooked up as the park is posted as a “No Idle Zone.”  Several residents stopped to chat and all of them were very nice, wished us a safe journey, and invited us back.  After a less than 100% positive experience yesterday when we arrived and registered we were feeling very good about the park by the time we left.  That, however, did not change the fact that the park design is only marginally usable by a 40 foot highway bus, and not really a good choice for an overnight stay as they do not have any pull-through sites.

Butch and Fonda pulled out of their spot about 15 minutes after us and by 10:30 AM had their car hooked up and were ready to roll.  We pulled out in the lead and 1.5 miles later pulled back onto westbound I-8.  We exited I-8 34 miles later near Gila Bend and got on a connecting road leading to AZ-85.  We came to a split and were not sure where the GPS intended to take us as it told us to turn left which would have put us on AZ-85 southbound whereas the signs clearly showed that AZ-85 N to I-10 was a turn to the right.  Linda was double checking on her phone what we needed to do.  We went to the right and that turned out to be correct.

The 39 mile run up AZ-85 to I-10 was a 4-lane divided highway, although the road surface was a bit rough initially.  When we left I-10 for I-8 at Casa Grande yesterday the signage indicated that I-8/AZ-85 was the designated bypass route to get around Phoenix.  Once we rejoined I-10 westbound there was noticeably more traffic even though we were already 70 miles west of Phoenix.  The traffic eventually spaced out and we finished the 180 mile trip easily while enjoying the other-worldly scenery of the deep Southwest U. S.

We climbed over several small mountain ranges and stopped briefly at a rest area.  We climbed over one last mountain range, reaching an elevation of ~1,600 feet ASL (on the RVND 7710 dashboard display), and finally saw the valley where Quartzsite sits at the bottom nestled against the next mountain range to the west.  We then dropped 700 plus feet over the next 12 miles on a gradual but constant grade.  As we descended and neared Quartzsite we saw the first RV’s parked on the BLM land south of the highway, which was very exciting.

In spite of studying satellite images I did not have a good picture in my mind of what I was now seeing.  I did not expect the mountains to the east and west of town and I did not expect vegetation.  I thought this area would be a vast expanse of flat, barren, sun baked desert.  What lay before us was much nicer than that and we could see immediately why RVers have come here for years and returned year after year.

There are two exits for Q, one at either end of Main Street (B-10) which parallels I-10 on the north side.  We took the second (west most) exit as that is where the Pilot Truck Stop is located.  We both topped up our tanks and then pulled out of the way to disconnect our cars.  We had 5/8ths of a tank but I wanted to add biocide and top it off to eliminate as much air as possible.  With changes in temperature moisture in the air (in the fuel tank) can condense out.  Water in the fuel then contributes to the growth of algae.  I wanted to prevent that since we will be sitting for almost three months.  I will run our fuel polishing pump as well, but the biocide and full tank will really help prevent fuel problems.

Butch had already called Jim (Joe’s brother) and he drove over to escort us back to Joe and Connie’s property.  We made a little caravan with two buses and two cars following him there.  I really did not know what Quartzsite would be like.  My first impression was that it was a combination of the world’s largest RV rally with the world’s largest flea market.  There are RV’s everywhere, and stuff for sale everywhere else.  It is not an “upscale” place, but it is not trashy and rundown either.  It’s a little funky and a bit alternative, a kind of 1960s meets the old west vibe, and I think it will be a great home base for the winter.

Joe and Connie’s property is on a small side street in the NNW part of the city.  Butch pulled in first and I waited in the street while Jim got him backed into their spot facing due south.  Jim then directed me into a spot parallel to the fence on the north property line facing east, which is how I had hoped we would be parked.  It was much easier to get into than Butch and Fonda’s spot.  Fonda and Linda pulled the cars in and parked them after I was out of the way.  The property was smaller than I thought it would be from the satellite images, but large enough, and nicer looking than I expected as well.  There was one motorhome here already, an older Country Coach, and it turns out that they will be the only other rig here.  The owners had gone home for Christmas unexpectedly and will be back around January 1st.

We were pointing slightly up hill so I initially raised the rear end rather than drop the front.  To get level, however, I still needed to drop the front and the Level Low system once again failed to respond.  I checked the pneumatic solenoid valves in the bay under the driver’s seat but nothing seemed to be amiss.  I switched the selector valve in the cockpit between its various positions and the front finally responded.  I have replacement parts for one pneumatic solenoid valve but I am now wondering if the problem might be the selector switch?  I have not checked the maintenance manual but I presume this is a strictly electrical switch that determines which pneumatic solenoid valve the “up/down” rocker switch controls.  I presume the rocker switch is working correctly as it controls the left rear and right rear leveling valves and puts the suspension in driving mode without difficulty.

The easiest/cheapest fix is the pneumatic solenoid valve, unless that turns out not to be the problem.  The next easiest fix is probably replacing one or both Norgren valves in the bay because they are somewhat accessible.  I know the cost of those valves, so it is both a more expensive and more involved repair, especially if it turns out to be unnecessary.  I have no idea what the selector switch costs and it appears to be in a difficult location to service, but if that is the problem then that is what has to be repaired.  There are several possibilities besides the pneumatic solenoid valve.  It’s possible that the selector switch connections for controlling the front height control valve have become marginal and intermittent.  It’s also possible that the switch itself is failing and needs to be replaced.  Another possibility is the electrical connections at the solenoid.  Whatever it turns out to be it won’t be the first marginal/intermittent thing we have found on the bus.

I eventually got it leveled, and having the rear end raised and the front end lowered is not a bad thing as it makes it easier to get in/out of the front door and provides more clearance under the utility bay for the dump hose.  We will be in this spot for the next 12 months, except possibly for a few days in February to attend an informal gathering of a few members of our FMCA Freethinkers Chapter at the Peg Leg Monument near Anza-Borrego State Park in Southern California.  We will leave Quartzsite in early March for the Escapade rally in Tucson, Arizona.

Once I had the coach leveled I shut off the engine and went through my arrival routine.  When I went to connect the shorepower cord I discovered that we only had a “30 Amp” RV service.  A “30 Amp” service is just that; a single 120 VAC connection (line, neutral, ground) protected by a single pole 30 Amp circuit breaker (on the line).  A “50 Amp” RV service, by comparison, is two 120 VAC lines (180 degrees out of phase) with a shared neutral and a ground.  The two lines are protected by a 50 Amp double pole circuit breaker and are actually a 240 VAC, 50 Amp service.  However, in most RV’s each line (leg) is used as a 120 VAC, 50 Amp service in conjunction with the neutral, so a “50 Amp” RV connection is actually used as a 120 VAC, 100 Amp service.  That’s over three times the power of a “30 Amp” RV service.

We can manage on a 30 Amp service—we have before—especially if we do not have to run the air-conditioners.  Our air conditioners are not working at present anyway, but we do not expect to need them while we are here, so that will help.  We cannot use the Gaggenau cooktop, as it is a 240 VAC device, but that’s OK too.  Linda prefers to use the portable induction cooker anyway; it is more efficient and doesn’t heat up the coach.  Still, operating our coach on a 30 Amp service requires much more conscious management of our electrical usage and is thus a tad inconvenient.  On the other hand, our electricity is metered so we pay for what we use.  Having a 30 Amp service inherently limits how much electricity we can use.

Many (most) circuit breakers will only carry 80% of their rating on a continuous basis so we effectively have 24 Amps available to run things.  That’s not a lot of power for a large, “all electric” coach.  I adjusted the “AC Input” setting on the Magnum 4024 inverter/charger to 25 Amps before turning the power on.  The unit limits the amount of current it uses to charge the house batteries to a percentage of that setting.  Setting it to 25 Amps instead of 30 Amps gave us a bit more cushion to run other devices while the batteries were charging.  Once they are fully charged I will dial this back up to 30 Amps.

I joined Linda, Butch, Fonda, and Jim and introduced myself to Connie.  Joe and Connie own this place but Joe was not here today.  He ended up in the hospital being treated for a scorpion sting and is now recovering in a care facility for a week.  By his own admission he was careless; he took a pair of shoes out of a closet he had not worn in a year and put them on without checking to see if something had taken up residence therein.  Not being from the desert southwest this would not even have occurred to us.  We know there are snakes, scorpions, and other “things” here, but this scorpion was in their park model trailer living in a shoe in their closet just 60 feet from our bus.  That certainly served as a heads up for us.

After chatting for a while I finished hooking up the water softener to the water supply and the coach.  We had about 1/2 tank when we arrived and I brought the level up to 2/3rds.  Butch had some test strips so we used one to check the hardness of the water.  It showed 25 grains per gallon (gpg), the highest mineral content it could indicate.  Our portable water softener has a capacity in grains which determines how much water it can soften before it needs to be recharged.  A “1,000 grain” water softener will only treat 40 gallons of 25 grain hardness water (1,000 / 25 = 40) whereas it will treat 100 gallons of 10 grain hardness water (1,000 / 10 = 100).

Butch and Fonda have a 10,000 grain portable water softener but the information we got with ours did not include the grain capacity.  Our softener is similar in size to theirs so I can probably safely assume that it has at least a 7,500 grain capacity.  Given the hardness of the water here that means it can treat about 300 to 400 gallons before needing to be recharged.  Our fresh water tank holds approximately 125 gallons.  If we use most of the water before refilling it we will need to recharge the water softener after every third filling.

Recharging (regenerating) the water softener is simple and inexpensive but takes a little time.  The filter is removed from the housing and the housing filled with crushed salt.  Water is allowed to flow very slowly through the salt and then through the softener and onto the ground.  When the salt is gone the unit is recharged.  If this seems wasteful of water it is, in fact, how almost all water softeners work.  The advantages of softened water are worth the little bit of added water use, especially since we have an Aqua-Hot hydronic heating system that specifies the use of softened water for optimum performance and reduced maintenance.

Rain had been in the forecast all day and we finally started to get an occasional drop so I closed up the bay doors and went inside.  Once we were settled in Linda sent a TXT message to our children letting them know we had arrived.  She attached a photo she took on her camera of our coach in situ.  I took a few photos on mine and TXT’d one to Chuck to let him know we were finally here.  I then laid down on the sofa and took a nap.  I eventually woke up to the sounds and smells of dinner being prepared.  Linda made a very yummy crushed lentil curry and opened a bottle of Barefoot Pinot Noir.  It was a bit dry for my taste but she enjoyed it.  It’s a good life.

The view to west (towards Lollipop Ln) from the east end of our "camp."  Our coach is to the right with the awning out.

The view to west (towards Lollipop Ln) from the east end of our “camp.” Our coach is to the right with the awning out.

Storm clouds gathered and shrouded the mountains to the west but all we got was light rain; nothing like the weather that swept through the Pacific coast from Los Angeles up into Oregon.  Not that far north of us Las Vegas, Nevada, got rain, ice, and snow.

After dinner Linda signed-in to RVillage and updated our location.  She indicated that we were not in an RV park as we are on private, non-commercial property that is not, and should not, be in the RVillage (AllStays) database.  I will check tomorrow to see if the website shows us other Villagers in and around the Q.

I checked the house batteries at 9:45 PM.  They were at 25.6 VDC drawing 0 Amps and showed “Full Charge” even though the BMK showed the SOC at 95%.  Like our stay in Alvarado I suspect the SOC will be back up to 100% in a couple of days.  I made note of the readings and headed to bed.  It was good to finally be here and we are looking forward to an interesting, pleasant, productive, and enjoyable winter.

 

2014/12/05-08 (F-M) On To Texas

2014/12/05 (F) Parting Company (for now)

A set of standing jokes with us involves our answers to the question “what time is it?”  The most common response is the day of the week, such as “Friday” (if we know what day it is) or perhaps “I think it’s Friday” (if we are less sure).  Variations include “daytime” or “nighttime” both of which only restate the obvious but at least we are usually correct, or perhaps “morning,” “afternoon,” or “evening” if we are trying to be more precise.  More globally we might answer “eastern” or “central” referencing the time zone we (think) we are in.

I was awake and ready to get up at 5:30 AM (technically the morning but still dark as night).  I checked the house batteries and they were down to 66% SOC (State Of Charge).  The coach had been running on the batteries/inverter since 9 PM last night, so 8.5 hours.  At 3.6 percentage points per hour I expected a 31 percentage point drop to around 60% SOC, so this charge level seemed reasonable, except that we had very few things running last night.  The refrigerator and auxiliary air-compressor were on, of course, although the air-compressor only runs for a few minutes every couple of hours and the fridge runs around 20-24 minutes per hour.  The Aqua-Hot was turned on but I did not hear the fans come.  I had the thermostats set to 15 (Celsius, 59 Fahrenheit) before we went to bed and the temperature in the coach this morning was in the upper 60s, so I don’t think any of the zone pumps or heat exchanger fans came on overnight.  In other words, it seemed to me that we had used more charge from the batteries than we should have.  Although I installed the 24 VDC battery bank and the new Magnum inverter/charger two years ago, we have not done very much boondocking (dry camping, no hookups) so we are still figuring out the finer points of this system.

I started the GenSet and the charger came on in bulk charge mode delivering 89 Amps to the battery bank at 29.1 VDC.  It switched to absorption mode fairly quickly and by 7:30 AM it was delivering 34 Amps at 28.3 VDC and the SOC was up to 86%.  The battery bank has a 400 A-Hr capacity (at “24” VDC, which is actually 25.4 VDC when fully charged) so 10% of that is 40 A-Hr and the generator had returned approximately 80 A-Hrs of charge at 24VDC to the battery bank.  (“A-Hr” stands for Ampere-Hours and is actually a measure of energy, specifically electrical charge, which technically should be stated in Coulombs.)  “40 A-Hr” means a steady flow of current at a 40 Amp rate for one hour.  Note, however, that this also depends on the voltage.  40 A-Hr for a nominal 24 VDC system is twice the energy of 40 A-Hr for a nominal 12 VDC system.  Most RVs are set up with a nominal 12 VDC house battery system.  Our house battery bank is thus equivalent to an 800 A-Hr, 12 VDC system.)

The downside to all of this is that conventional lead-acid batteries, including our AGM batteries, do not tolerate very well being repeatedly discharged below 50% SOC, so the effective/useable capacity is about 1/2 of the stated capacity.  The more deeply the batteries are drained the fewer times they can be brought back up to full charge. Whereas shallow discharging allows for more cycles, and more total energy in and out, but requires a larger battery system to provide power for a reasonable amount of time.  Batteries are heavy and bulky, so you cannot just take as many as you would like.  For lead-acid batteries 50% discharge seems to be the optimal compromise for battery life, useful run time, and size/weight.

We were up early enough to have a light breakfast and a cup of coffee and have time to digest our meal before we started driving.  I powered on our Verizon MiFi and my computer and downloaded e-mails while Linda used her iPad to preview the truck stop options at the interchange just this side of Little a Rock, Arkansas.  She also pulled up the satellite image of the Wal-Mart in Texarkana, Texas where we planned to spend the night.  Cellular access to the Internet, mapping programs, and satellite imagery, along with GPS receivers have changed the nature of motor vehicle travel in general and RVing in particular.  There are certain things where the element of surprise associated with discovery is a good thing, such as an unexpected view when hiking, but when it comes to maneuvering a 40 foot motorcoach with a 20 foot car/towbar attached to its rear end surprises are usually not a good thing.

Around 8 AM we stepped outside and saw Fonda outside with their two dogs (Rascal and Daffy) so we walked back to their bus.  Butch was on the phone with U. S. Coach in New Jersey discussing the main engine air-compressor situation.  They confirmed that the unloader valve(s) are a common failure point and that the replacement parts were inexpensive and available.  He ordered four sets for delivery to Amarillo, Texas where they will be visiting someone while we are in Alvarado, Texas.  Two sets are for them and two sets are for us.  The parts may not make it to Amarillo until Wednesday, so we will be as flexible in our travel planning as we can.  If Donn will let us stay at his place in Alvarado, Texas we may just sit there, unhook the car, and go explore the area.

By 8:30 AM the house battery charger was showing zero (0) Amps at 25.3 VDC, indicating that the batteries were fully charged.  The Magnum Battery Monitor Kit (BMK), however, was showing the SOC as 88%.  I am inclined to believe that in this case the BMK is not showing the correct SOC, but I will keep a close eye on this.  When we get to Donn’s place we will be plugged into a “50 Amp” RV electrical service for at least 40 hours and see what that does to the readings.

While Butch and Fonda had breakfast we went for a stroll around the Wal-Mart parking lot to stretch our legs and scoped out the best egress route.  Around 9 AM we started preparing the interior for travel and by 9:45 I had the car prepared for towing and the main engine running.  We pulled out at just before 10 AM and took the lead.  I drove the first 80 miles at 55 MPH due to light to moderate rain and greatly reduced visibilities.  We took exit 161 just east of Little Rock, Arkansas and pulled into a Love’s Truck Stop.  Butch picked a better lane than I did and we ended up leaving and driving to the Pilot Truck Stop on the other side of the highway.  But before we left Linda walked over to let them know what we were doing and say “so long, see you down the road.”  Two miles after we got back on the highway we stayed left for I-430 around the south side of Little Rock while Butch and Fonda stayed on I-40 around the north side of the city.  We were headed to I-30 and then southwest towards Dallas while they were headed west towards Amarillo.  We will meet up with them next week, perhaps in Midland, Texas or on down the road in New Mexico.

Most of the rest of our drive was through rain but otherwise uneventful.  In spite of the weather the drive was very pretty.  I-30 west of Little Rock climbs through rolling hills with extensive woodlands on both sides of the highway.  We finally drove out from under the rain about 30 miles from Texarkana and finished the trip with bright sun and an ambient temperature of 74 degrees F.

It was easy enough getting off I-30 onto the southbound connector but a bit trickier getting over to make a right turn in the short distance we had.  But we did, and turned onto the road that runs in front of the Walmart and down to the far entrance, as planned.  I started my left turn into the parking lot road when a guy pulled up to make a left turn coming out of the parking lot.  I had tried to swing wide but he realized he needed to back up or risk damage to his truck, so he did.  I could not make the first left into the actual parking lot so I went down to the next entrance by the store.

I barely made a 180 degree turn into the first row, causing a women sitting in her car to just stare at us as I missed her by inches (apparently it did not occur to her to back up).  I had to straighten out before completing the turn to prevent scraping the driver’s side of the car on a huge boulder at the inside corner of the turn that I somehow did not see before I started the turn but caught sight of in my rearview mirror.  Considering that I just completed a drive through less than ideal conditions, which was probably more stressful than I acknowledged, this was not the way I wanted to end our driving for the day.  Like with airplanes, however, the takeoffs and landings are usually the trickiest parts.

We pulled into our selected parking spot at the back (east) end of the parking lot, in parallel with several tractor-trailer rigs, at 2:40 PM.  I went through our arrival procedure with one glitch; I could not raise or lower the front end of the coach using the Level Low system.  It worked fine yesterday so something had obviously changed.  I leveled the coach by adjusting the rear tires instead.  Once the coach was set I checked the house battery bank SOC.  It was 71% but the inverter/charger readout said the battery bank was at 25.0 VDC and the charger was delivering zero (0) Amps.  Since no loads were being powered I presumed the voltage was probably a good indication of the battery state.  A “12 volt” battery is fully charged at a resting (no load) voltage of 12.6 volts (2.1 volts per cell times six cells).  Double that for a “24 volt” battery bank and the full charge resting voltage is 25.2 volts, so our batteries being at 25.0 volts indicated they were probably near full charge.

I decided to wait and turn the generator on later when it was time to cook dinner and let it bring the batteries up to full charge.  At this point, however, I am suspicious of the reading I am getting from the Magnum BMK.  The data suggests that I do not have the ZENA power generating system tied in to the battery/charger/inverter system in such a way that the BMK can correctly account for the charge the ZENA is providing, but that seems unlikely.  Still, I will have to check when we get settled in Quartzsite (or back home in the spring) and/or see if there is a way to reset the 100% SOC level on the BMK.  We will be plugged in to a 50 Amp RV service tomorrow at Donn’s so I will see if the SOC rises to that level after being on shorepower for almost 48 hours.

Linda opened a few windows so the cats could have some fresh air.  We then walked over to the store for some exercise and fresh air ourselves.  I found a case for my Samsung Galaxy S III phone as a tab on my old holder has broken and it no longer holds the phone securely.  When we got back a pickup truck towing a 5th wheel trailer had pulled up next to us on the driver’s side.  It was parked such that our generator exhaust would blow in their entrance door.  I introduced myself to Gary and explained that we would be starting the GenSet in a little while.  He appreciated the heads up and elected to back up to where he was clear of our exhaust.

By the time I got back inside Linda was on the phone with Butch.  They were at a Wal-Mart in Checotah, Oklahoma just off I-40 about 60 miles west of the Arkansas border.  They also ran through rain the rest of the day and it was still raining there when he called.  The temporary air-pressure solution had continued to work well all day.

We ran on batteries/inverter until 5:30 PM and then started the generator so Linda could prepare dinner.  She needed to cook two baking potatoes in the microwave and sauté some onions, mushrooms, and broccoli using the induction cooker.  The microwave kept clicking and I noticed the current drop on that leg each time.  The other leg wasn’t drawing much current so I had her keep using the induction cooker and turned on the Aqua-Hot electric heating element.  That brought the current draw on each leg roughly into balance and the microwave behaved fine after that.  The charger was also drawing a few amps but not the much.

The microwave is wired through the inverter sub-panel.  With the generator running, each leg of the AC power is simply passed through the inverter to the sub-panel along with the neutral. I recall that the inverter relays are designed to carry 30 Amps on each leg, but we were only drawing about 20 Amps when the problem occurred so that should not be the source of the problem.  It appears that the genset may not tolerate 20 Amps on one leg and zero on the other, or perhaps a differential current draw of 20 Amps.  If that’s the case it is either an unfortunate design limitation or an indication that the generator is developing a problem.

In discussing this with Butch he said that gensets wired to produce 240VAC are usually set up to regulated that voltage but the 120VAC from L1 and L2 to Neutral can vary widely.  If the voltage on the microwave leg is dropping too low it will cause problems for the unit.  It is possible to rewire the genset to produce 120VAC and regulate that voltage, although it might require a new voltage regulator.  We would lose the use of our Gaggenau 2-burner cooktop but could live with that limitation.  Of more concern to me is the currents from L1 and L2 would now add in the Neutral wire rather than cancel, meaning the current in the Neutral conductor(s) could exceed their design specifications.

I got a TXT message from Chuck inquiring about our trip so I provided a few details.  I decided to check the bay under the driver’s seat to see if there was anything obviously wrong with the pneumatic solenoid valves that control the Level Low system.  There are red plastic fittings that screw into each solenoid and the fitting on the top one was unscrewed quite a bit.  The others were in tight so I screwed the top one back in.  I won’t know until tomorrow if that made a difference, but I decided to call Chuck and consult with him as I recalled him mentioning having had problems with these pilot valves on his H3-40.

Chuck did not think the plastic fittings were the problem but offered other salient advice about coils, ‘C’ clips, valves, and rubber ‘O’ rings.  If Donn will let us hang around for an extra day I will probably unhook the car and drive to the Prevost service facility near the Dallas Ft. Worth airport and pick up some new solenoid valves and perhaps a couple of Norgren valves and a windshield wiper motor.

We ended up with tractor-trailers pulling in and out around us well into the evening.  One in particular parked one spot over from us on the passenger side and let his engine idle for hours.  It felt like we were in a truck stop instead of a Wal-Mart parking lot, but given the price we had no basis to complain.  Still, if we wanted to stay at a truck stop we would have stayed at a truck stop.  Hopefully we can get a decent night’s sleep as I would like to be on the road at sunrise, which is 7:15 AM.

At 8 PM we went for a stroll around the store and the parking lot.  Wal-Mart parking lots are well lit as a rule and being 24/7/52 stores, there are always lots of people around making it a comfortable enough environment for an evening walk.  As we were getting ready to go to sleep I got a TXT message from Donn, with turn-by-turn directions for getting to his house and a couple of questions, which turned into a short TXT message conversation.  While I was texting with Donn our male cat, Jasper, came up by our pillows to look out the window and have a long back-stroking and chin-scratching session with Linda.  Traveling is stressful for the cats, especially at first, and they seek the comfort of our attention quite a bit (when they are not sleeping).  Squared away on tomorrow’s travel arrangements we drifted off to sleep to the gentle hum (rattle?) of large diesel engines.

Donn Barnes' place in Alvarado, Texas.  Yee Haw!

Donn Barnes’ place in Alvarado, Texas. Yee Haw!

2014/12/06 (S) Alvarado, Texas

I was awake at 5 AM and got up shortly thereafter.  The house batteries were showing 58% SOC and 24.3 volts with no current draw.  I thought about not recharging the batteries and seeing how the ZENA system did on the drive today, but decided I did not want to risk depleting them below 50% SOC.  I turned on the generator and the Aqua-Hot electric heating element to balance the load and make hot water for our use this morning.  The charger went into Bulk Charging mode putting 88 Amps into the battery bank at 27.4 volts, so the batteries definitely needed recharging after running the coach for 8 hours.

We have and older, 22 cubic foot, residential (AC compressor) refrigerator that I presume accounts for most of the battery use overnight.  For each Ampere of current the inverter produces at 120 VAC it would draw 5 Amps from the “24 volt” batteries if it was 100% efficient, which it is not.  If I assume the SOC actually dropped from 88% last night at 9 PM (when I shut the generator off) to 58% at 5 AM this morning, the 30 percentage point drop would represent 120 A-Hrs of charge removed from the batteries (30% of 400) which equates to an average continuous draw of 15 Amps per hour at “24” volts.  Divide that by 6 (to account for inverter inefficiency) and you get 2.5 Amps per hour at 120 VAC, not that much, really.

It’s a bit more complicated than that, of course, as the refrigerator draws more current when it starts and has an electric heating element around the edge of the doors as well as an automatic defrost feature.  Those last two features are nice when connected to shorepower, but are not battery friendly, and I need to rig up a switch that allows me to turn these “features” off when we are dry-camping.  We also have an auxiliary air-compressor that supplies pressurized air to operate the toilet and other air-powered accessories.  It doesn’t run often but it draws a fair amount of current (at 120 VAC) when it does.  We also have small miscellaneous AC and DC loads that are on all the time, but collectively they add up.

By 6:30 AM the charger had shifted to Absorb Mode at 27.9 VDC and was putting 63 Amps into the batteries.  Between the charger, the refrigerator, and the electric heating element we were drawing 14 Amps on both legs.  I was hoping to be on the road this morning by 7:30 AM.  The batteries will not be fully charged by then, so this may be the first real test of the ZENA systems ability to maintain and recharge them while we drive.  My ultimate goal is to adjust the ZENA system so it can power the Magnum inverter/charger while we are driving at a level that is sufficient to run the refrigerator and fully, or almost fully, recharge the house battery bank.  That will apparently require some tweaking and additional testing which I am not going to do while parked at a Wal-Mart or other dry-camping location.

As we were getting ready to pull out I noted that the batteries were at 83% SOC and shut off the generator.  The drive from Texarkana to Alvarado was easy with dry conditions and sunny skies. Traffic was mostly light and we enjoyed the east-central Texas countryside.  Traffic got a lot denser as we neared Dallas but once we exited I-30 onto I-635 south it thinned out again.  It thickened again as we approached the exit for US-67 south and then thinned out and stayed that way for the rest of the trip to Alvarado.  We turned back north on I-35W and pulled in to Donn’s place a few miles north of Alvarado proper around 11:30.  I stopped in his driveway, exited the coach, was met by Donn, and we discussed where he wanted me to park.

The desired parking arrangement required us to unhook our car so we did that.  With Linda’s assistance I made a four-point turn to get the bus parked.  I pulled it up somewhat parallel to Donn’s Bluebird, backed up between the end of a building and a tree, swung forward into the driveway, and then backed around close to, and parallel to, the building.  I leveled the coach and this time the front adjustment of the Level Low system worked just fine.

Donn had a 50 Amp RV extension cord available to plug into conveniently located near our utilities bay.  By the time I got our coach plugged in it was noon.  I checked the meters for the house batteries and they indicated 76% SOC with the charger in Absorb Mode putting 56 Amps into the batteries.  For the 4.5 hours we were operating on batteries the expected drop would have been 13.5 to 16.2 percentage points at 3.0 to 3.6 percentage points per hour for a SOC of approximately 70 to 67, so 76 seemed OK, suggesting that the Zena system was doing something.

Linda got things squared away inside the coach and then we sat outside and chatted with Donn for a while.  He suggested we get lunch at Spiral, a vegan restaurant in the Ft. Worth medical district.  He drove since this is his home turf and he knows his way around.  Donn had quesadillas, Linda had a Philly cheesesteak, and I had a patty melt.  The food was very, very good.

After lunch Donn took us to Central Market.  The Market was not as refined as Whole Foods but had an amazing selection of fresh organic produce and specialty items, such as the tahini Linda needed to make her mock beef stroganoff tomorrow.  Our shopping done, Donn took us to meet his friend Jeanine, whose age (85) and health (not the best) prevent her from getting out much.  In spite of her issues we had a thoroughly delightful visit, after which we worked our way back to Donn’s place.

Linda checked on the cats and then drew three glasses of Shiner Bock draft beer.  Yes, Donn has beer on tap at all times; two taps, actually, but both had Shiner Bock.  We sat inside and had a long chat while enjoying our brews.  Neither of us had ever heard of bock style beer or the Shiner Company but it was good.  Donn was involved in raising mules, building wagons, and participated in a wagon trip around the state of Texas in 1986.  At 7 PM Donn started assembling a vegan pasta salad using quinoa pasta, bell pepper, and grape tomatoes.  Donn is an excellent cook but was very gracious about accommodating our vegan dietary preferences.

By 8:45 PM we were tired so we said “good night” and returned to our coach for the evening.  We read and wrote for a little while.  Butch called t let us know they had made it all the way to Amarillo in one day and were safely in the mobile home park where their friend lives.  The earliest they will be leaving is Tuesday morning, which may coincide with our travel plans.

Linda coming back from Donn's laundry room.  Elvis is following her and Lucy is farther back to the right.

Linda coming back from Donn’s laundry room. Elvis is following her and Lucy is farther back to the right.

2014/12/07 (N) A Day Of Rest

We slept in this morning, which meant I was awake at 6:30 AM, were up/dressed by 7:30, and enjoying our morning coffee (yeah) by 8:00.  It was in the mid-40s outside with dense fog, and 62 in the coach; perfect conditions for sleeping but a bit cool for sitting around.  The toilet would not flush and I suspected immediately that I had shut the wrong air valve last night.  In the excitement of our arrival yesterday, and finally being able to plug in to shore power for the first time since we left Indiana, I had forgotten to switch off the chassis batteries and close the unneeded air valves.  I did all of that using a flashlight right before going to bed and once again closed the wrong valve (I have made this mistake before).  Opening it this morning fixed the problem, so at least it was an easily corrected operator error and not something that was actually broken and needed to be repaired.

Donn, who is part Comanche, leant us a book by historian T. R. Fehrenback on their history and Linda started reading it this morning.  I scanned for WiFi networks with our WiFi Ranger (WFR) and found eight, including two that were “open.”  Open networks are not encrypted, so we prefer not to use them, but they may still require a password to gain access.  As a general rule we do not “borrow” open WiFi connections from unknown sources.  Our Verizon cellular signal here is a very strong 4G/LTE with five bars, but we prefer to use WiFi when available and save our limited cellular data for situations where it’s our only way to get online.  I suspected that one of the WiFi signals was Donn’s but could not tell which one it was.

We had oatmeal for breakfast, a nice treat on a cool morning.  Linda usually makes oatmeal from scratch these days, but she brought Quaker Instant Raisins, Dates, and Walnuts, which is my favorite.  It’s creamy without being mushy, and I just like the way it tastes.

We finally met up with Donn after breakfast and asked him about the available WiFi.  He was kind enough to give us the password to his wireless network.  He also gave us some Green Tomato Relish he had made and it was spectacular.  I mean, this guy can cook.  He put on some more coffee and we got back into a long morning discussion on a wide range of topics, so playing with our communications technology had to wait until later.

By 12:30 PM we were all getting hungry and Donn suggested the Mellow Mushroom in the TCU (Texas Christian University?) district of Ft. Worth.  We took the long way to get there so we could see the route we would follow when leaving the area and continuing our westward journey on I-20.  Our route took us down Camp Bowie Road, past the zoo, and a lovely adjacent neighborhood.  While not a vegan restaurant like Spiral, Mellow Mushroom had good vegan pizza options including Daiya non-dairy (non-animal) cheese.  We had a thin crust pizza with an olive oil and garlic base, with cheese, mushrooms, onions, and sun-dried tomatoes.  Yum.

After lunch we headed back to Alvarado but stopped first at Donn’s next door neighbor’s house so he could get his hair cut.  Back at his place we continued our conversation.  When it became clear that we were all a bit tired we went back to our coach to give Donn some personal space and downtime.  We agreed to meet back in his house between 7:00 and 7:30 PM for dinner.  Donn is slightly allergic to cats, so we did not visit or dine in our coach.

With the WiFi network key Donn had provided earlier I was able to connect our WFR to one of the available WiFi signals and upgrade its firmware.  I was then able to connect our Amped Wireless Access Point (AWAP) to the WFR, and connect our devices, including the NAS device, to the AWAP.  This was our standard setup this past winter in Florida.  We used this setup again at the Escapade in May and the GLAMARAMA in June but had not set it up yet on this trip.  The advantage of this setup is that the AWAP creates a secure wired/wireless network to which we connect all of our devices and can share data between them.  When we cannot connect the WFR to an external WiFi network we turn our Verizon MiFi on and connect the WFR to its WiFi signal instead while all of our devices remain connected to the AWAP.  It’s a pretty slick setup that has worked well for us and I was glad it was still working as we appeared to have issues with the WFR while in Twelve Mile, Indiana.

Linda checked online and most of the museums we thought about visiting tomorrow turned out to be closed on Mondays.  I was checking e-mail and had a announcement/confirmation for the FMCA National Education Committee worksession tomorrow at 3:00 PM CST.  If we do not leave until Wednesday morning we may try to go to a couple museums in Ft. worth on Tuesday while Donn is at work.

A little after 6 PM Linda started preparing her Seitan Mushroom Stroganoff.  This is a dish she has made and served at home to our non-vegan friends with great success.  Although Donn is a dedicated omnivore, he has other friends who are vegans and has been very thoughtful in the foods he has prepared for us and his selection of restaurants.

Linda used our Gaggenau electric cooktop to cook the dish.  She finished it at 7:25 PM and we took it over to the house.  We would normally have wine with this dish, but Donn has Shiner Bock beer on tap at the moment and, although I am not a big fan of beer, I found this one to be very much to my taste.  It also went well with the dish.  We talked for a while after dinner and retired to our coach at 10:45 PM as Donn had to be up early to drive into the office in Dallas.

Our male cat, Jasper, resting on the front couch.  He's fine as long as the bus isn't moving.

Our male cat, Jasper, resting on the front couch. He’s fine as long as the bus isn’t moving.

2014/12/08 (M) Lucy, I’m Home!

Donn left for his office in Dallas long before we got up at 7:30 AM.  Granola with fresh bananas, grapefruit juice, and coffee made for a fine breakfast.  Donn left us access to the house so we could use the bathroom, which we greatly appreciated.  Yes, we have a bathroom onboard, but the less of our stored fresh water we use, and the less we put into our holding tanks, the longer we can go without stopping at a full-hookup RV park.  We left home on Sunday, November 30, so this is our 9th day on the road, and we are still above 2/3rds on our fresh-water tank, and probably below 1/3rd on each of our two holding tanks (black- and gray-water).  I say “probably” because the level sensors for those two tanks are not very accurate.

We left in our car at 9:30 AM and drove to the Fort Worth Prevost Car Inc. Parts and Service Center just south of the Dallas Fort Worth (DFW) airport in search of some spare parts for our Level Low system and lower windshield wipers.  The CatView program on my laptop showed a “641055 Manifold Valve / w/4 Solenoid” on drawing “H4-1640-00 Level-Low – Control Panel & Valves” but I knew I did not want this entire assembly.  Art, in the parts department, helped figure out the parts I was looking for, which turned out to be a “641928” for $41.28 and a “641929” for $35.60.  One is the solenoid coil and the other is the pneumatic valve, but I’m not sure which is which.

I was also looking for an “800304 Motor Wiper Assembly / 24V / Nidec” as shown on the “H4-2305-05 Lower Windshield Wiper – Installation” drawing.  CatView indicated that it had been superseded by “Kit #300506.”  That was correct and the cost was $200.03, but they saved me from spending the money as they did not have one in stock.  I was also thinking about getting a “641057 Valve, 5 Ways, 3 Positions” (Norgren K41EA00) and a “641056 Valve, 3 Ways, 2 Positions” (Norgren K910058).  They were $150.91 and $143.80 respectively so I did not even ask if they were in stock.  My diagram also showed a “562353 Diode / 1 Amp” but I decided not to ask about it at this time.  I can get most parts delivered in 2 – 3 days via UPS by ordering through their Elgin, Illinois center, but I am trying to stock a set of replacement parts that might be needed for a roadside repair.

Parts in hand we headed back south on TX-360 towards Six Flags to see if we could find the home stadiums of the Dallas Cowboys (AT&T Stadium) and Texas Rangers (Globe Life Park).  They were located just west of Six Flags and south of I-30, part of an amazing sports/entertainment complex euphemistically known as “Jerry World” after the owner of the Cowboys.

We got on I-30 westbound, exiting some 14 miles later at Montgomery Street, and followed the signs to the Fort Worth Cultural District.  We knew that most of the museums were closed today but we still wanted to see them from the outside.  Even if they had been open we did not have time today to go in as I had an FMCA National Education Committee meeting (telephone conference call) at 3 PM CST.  We did, however, have time to find Central Market again.

We walked up and down every isle and realized we had seen less than half of the store when we were here on Saturday.  Central Market may be the most amazing market we have ever been in.  As much as we like Whole Foods, it simply does not rise to the level of Central Market when it comes to fresh/organic items.  We picked up some additional fresh and packaged items, including a mix for white bean chili with jalapeños to make for dinner.

When we got back to our coach Linda started the chili.  We then took advantage of Donn’s hospitality to do a load of laundry only to discover his dryer was out of commission.  No problem; we just hung the laundry outside to dry in the late afternoon Texas sun and let it dry the old fashioned way.

Shortly before 3 PM CST I dialed in to the FMCA National Education Committee meeting and participated in the hour long work session.  There were good ideas put forward and it looks like I will have some specific things to do over the next several months.

While the chili cooked we both took a shower, again avoiding using our onboard water and waste tanks.  Donn is in the process of getting rid of lots of books and invited us to peruse them and take anything that looked interesting.  Linda found a half dozen titles, mostly paperback mysteries, that she will enjoy reading and then leaving in an RV park “library” someone down the road.  For never having met prior to noon on Saturday, Donn has treated us like old friends; a most considerate host.

Donn got home from work at 6:15 PM and I let him know that Linda had prepared the chili for dinner.  We waited 15 minutes for him to change clothes and tend to his dogs (Elvis and Lucy) and then brought the chili and some crackers to the house.  He provided the bowls, spoons, glasses, and draft beer.  I don’t think I will give up wine in favor of beer but the Shiner Bock that Donn keeps on draft was easy to drink and very tasty.  I detected a subtle hint of sweet citrus in the finish, but no one else did.

Butch called as I was finishing my first bowl of chili.  He reminded me that the SKP Dreamcatcher RV park is in Deming, NM just a few miles farther on past Las Cruces, NM and we discussed possibly meeting up there and staying the night.  He indicated that he had looked at the unloader valves on their main engine air-compressor and they may not be the problem.  Since the parts won’t make it to Amarillo until Wednesday or Thursday they are not going to stick around and planned to head out in the morning.  Linda got online to check distances and potential stopping points and found that it was 720 miles from here to Deming, NM and 313 miles to a convenient Wal-Mart in Midland, TX.  We let Donn know that we would probably leave in the morning and said our “farewells until next time” and thanked him for his generous hospitality.  If our future travels take us anywhere near Dallas Ft. Worth we will definitely stop and spend time with Donn.  Heck, we would travel here just to visit with him.

 

2014/11/17-23 Bus Work Wrapup

2014/11/17 (M) Bypass Extension

12VDC outlets on lower center cockpit console.

12VDC outlets on lower center cockpit console.

After my usual breakfast I decided to change the drinking water filter cartridge under the kitchen sink.  The new one arrived UPS on Friday but I wasn’t really eager to change it, given the difficulty I have had with it in the past.  As I expected, the old one did not come out exactly the way the instructions said it would and I fussed with the new one for 30 minutes without being able to get it in.  Butch popped into my bus to see what I was up to and I enlisted his assistance.  We fiddled with it for another 45 minutes and finally gave up and put the old one back in, although it did not go in easily.  Clearly we were doing something wrong but could not figure out what it was.

I am not exactly sure what Butch and Fonda did for most of the rest of the day but whatever it was they did not need my help.  I know they drained some coolant from a hose on the main engine and changed a short piece of hose.  Having gotten off to a bad start with the water filter cartridge I decided to pick the coach up a bit and then work on the 12 VDC outlets for the cockpit accessories.

There’s no such thing as a “small job” on a bus conversion; there are only big jobs and really big jobs.  The installation of the 12 VDC outlets involved mechanical and electrical considerations; I needed to mount them someplace that was accessible but out of the way, and I needed to be able to get 12 VDC power to that location.  There is a vertical panel about five inches wide just to the right of the driver’s right leg.  It runs from the floor up to the bottom of the dashboard and houses two thermometers, a cigarette lighter, and a swing out ash tray.  The panel comes out after removing six screws.  To the right of that panel is a house systems switch panel that was added by Royale Coach.  It is about 10 inches wide and comes down from the dashboard half way to the floor.  After checking to see what was behind the vertical panel I decided to mount the outlets to the passenger side of the floor-to-dash enclosure.  I mounted them below the bottom of the house systems switch panel and slightly back from the front plane of the dashboard.  They are very accessible in this location but tucked back out of the way enough to avoid getting kicked.

Just above the house systems switch panel is an enclosure for the CB radio.  I had previously removed the four screws that secure the front panel and pulled the CB radio out of its enclosure.  The power leads used spade connectors so they were easily disconnected and the incoming power harness was long enough that I was able to drop it through the speaker hole in the bottom of the radio enclosure and behind the house systems switch panel.  I also disconnected the antenna coax, as it is not connected to anything on the other end, and dropped it through the speaker hole as well.  I added compatible spade connectors to the wires from the 12VDC outlets including a 2-wire pigtail so I could connect both DC negative wires to the one available DC negative line.  I drilled a hole for the outlet wires to go through into the space behind the vertical panel as I would eventually like to power them from there and reconnect the CB (once I get an antenna mounted).  For now, however, this arrangement will do what I need it to do; power the various cockpit accessories while keeping the power cables out of from under out feet.

By 1:45 PM I had completed the installation of the outlets but I had not re-installed the various panels.  I locked up the coach and the three of us got ready to go to Logansport to run various errands.  Butch was wrapping up a conversation with International Thermal Research regarding the installation of his Combi unit and getting answers to a few remaining questions.  It turned out that the reason the coolant circulation pump was running was that we had left the bypass switch on the Zone Control Board in the ‘ON’ position.  That was also why the Summer Mode light was on.  Butch turned the bypass switch off and the various indicator lights all seemed to indicate what they were supposed to show.

I ended up buying the parts for a drinking water filtration system at Home Depot.  I got a GE Drinking Water Filter Housing and filter element plus a collection of hoses and fittings to connect it to the existing 3/4″” OD copper plumbing under the kitchen sink.  I also picked up a can of flat black spray paint to use on the accessory mounting board for the windshield center pillar.  We stopped on the way back in to Twelve Mile to pick up Daffy from the local veterinarian.  Fonda had taken her there earlier and dropped her off to have her teeth cleaned.  Daffy was still pretty groggy but glad to have the comfort of her owners.

When we got back to their house Fonda helped me set up some cardboard to catch any overspray and I sprayed one side and all of the edges of my center pillar board.  I then headed to my coach and finished putting the dashboard panels back in.  After that I turned my attention to the drinking water filtration system.  It took me a couple of hours but I got the old filter head removed, mounted the new housing, and made all of the connections.  I installed the new filter element and turned the water pump on, opening valves one at a time as I worked downstream looking for leaks.  The only leaks I saw were small ones between the 3/8″ brass pipe nipples and the 3/8″ female pipe thread sockets in the plastic filter housing.  Both leaks were easily remedied with an extra turn of the right angle shutoff valves.

I had not quite finished the water filter project when Fonda came out to let me know that Linda was on the house phone.  She answered some accounting/tax questions for Butch and then we chatted for a bit.  We decided that I would move the Martin Diesel appointment from this Thursday to next Monday, if possible, as the weather should be much more agreeable.  That will also give me four additional days to work on bus projects here, which I need.

I returned to the coach, finished up the plumbing, made a quick dinner, cleaned up the dishes, and went in the house for the evening.  Butch and Fonda had already gone to bed so I did the same and dealt with e-mails and this post.

New drinking water filter and hoses under the kitchen sink (in the bus).

New drinking water filter and hoses under the kitchen sink (in the bus).

2014/11/18 (T) Holes and LEDs

We were all busy all day today but did not have as much to show for it as we have on some other days.  That’s the way it goes with bus projects.  I worked on three separate projects for our bus and helped Butch and Fonda with one project on their bus.

The first thing I did after breakfast was to spray another coat of flat black paint on the oak board I plan to use as a mounting plate for various cockpit accessories.  I then went to work on enlarging the return air openings above the shelf in the rear closet.  This turned out to involve quite a bit of work.  On the passenger side I had to cut the carpeting on the inside of the closet and peel it off.  I then drilled a hole in each lower corner to allow access for a sabre saw blade.  I borrowed Butch’s cordless sabre saw, so that involved getting the saw from the parts room.  I cut from the back side, as I had access via the rear TV cabinet, and enlarged the opening to about 10″ x 10″.

I did not have access to the back of the panel on the driver’s side so I had to take a different approach.  I removed the lower panel which gave me access to the space and the various relays mounted on the floor of the cabinet.  I needed to make sure there wasn’t anything on the back side of the upper panel where I intended to drill and cut.  I borrowed Butch’s lighted inspection camera, which required another trip to the parts room, and used it to look up inside.  It was clear, so I cut the carpet on the inside of the closet and removed it.  Working from inside the closet I did not have room to use the sabre saw, so I used my oscillating saw to cut the opening.  Once the panel was cut through on both sides and the bottom it still had the metal mesh stapled to the top back side.  I was able to use that to pull the mesh loose from the fixed panel and remove it.

The next step in this project will involve installing a pair of 12″ x 12″ return air grills after I vacuum up the debris from the drilling and cutting process.  Home Depot carries these grills but was out of stock when we were there last night.  They are supposed to be in tomorrow or Thursday.  I already have a roll of 1/4″ grid hardware cloth and I plan to cover the openings with a piece of that to make sure mouse-sized critters cannot get through the slots in the grill, which will go over the hardware cloth.

By the time I got to this point it was time for a quick lunch.  After my meal I checked in with Butch and he was at a point where he needed assistance attaching an aluminum angle to the driver’s side front ceiling.  This angle would serve as the attachment for the vertical face of the chase that will hide the wiring running along the junction between the wall and the ceiling.  With Fonda’s help we held the first piece in place and secured it with one screw near the rear end.  We then measured down from the center trim of the ceiling and adjusted the other end to keep the angle as close as possible to parallel along its entire length with the ceiling centerline.  With that piece mounted Butch clamped another piece of angle to the mounted one, giving us a nice straight extension of the line, and then clamped the second piece to be installed to the extension angle.  I then secured the second piece to the ceiling with several screws.

Butch held 3″ Wiremold channel in place from the front air-conditioner trim to the gap between the two angles we just installed and marked it for length.  Fonda cut those while Butch cut a piece of plywood to the width and length needed and then installed them.  We talked about putting up the chase on the passenger side, or at least the Wiremold channel for the fluorescent ceiling lights.  Butch said they planned to make that chase deeper, and I suggested they bring it out as far as possible and build it as a cabinet using a face frame with several stiles (vertical pieces) and one long, top-hinged, door.  They both made note of the idea but did not want to get involved in that today.

I took a short break to call Martin Diesel and move my generator service appointment from this Thursday to next Monday.  I have more to do on the bus than I can complete by Wednesday afternoon and the weather Thursday morning is forecast to still be very cold.  The cold spell is supposed to finally break on Saturday with highs in the 50s and lows in the 40s.  I should be able to hook up the care and leave early Monday morning in 43 degree weather; much nicer than 18 degrees (Fahrenheit).

I now turned my attention to the LED replacement lighting for the F72T12 fluorescent light fixture in the hallway cove.  The first thing I needed to do was locate the 12 VDC positive and negative wires that were controlled by the pair of three-way switches; one by the pantry and the other in the bedroom.  In spite of having the wiring diagram for the old fluorescent ballast on a label attached to the ballast, I was not able to trace out the wiring.  Butch came over to see how I was doing so I enlisted his assistance.  The situation had us both puzzled for a while but we eventually sorted it out by removing the two 3-way switches from their junction boxes and checking for voltage to chassis (DC) ground at various points.  It helped that there is a second light fixture in the hallway ceiling just outside the bathroom door that is controlled by these same switches as this allowed us to know when there should or should not be voltage present at the main fixture.

With the wiring sorted out I made a short jumper wire with male spade terminals on each end and used it to jumper the red and white wires together in the base of the panty.  The white wire turned out to be DC negative (ground) and the red wire ran to the far (rear) end of the chase, so this provided a ground connection at the far end of the chase.  I recoded them with black tape.  The other red wire at the far end of the chase was the switched +12 VDC so I now had what I needed to power the LED rope light in that space.  I reinstalled the switches and cover plates and put the removable bottom shelf back in the pantry.  (The old ballast and wiring is still under this removable shelf.)

The LED rope light can be cut every few inches but I decided I should test it to make sure it worked before I started cutting it into smaller pieces.  I uncoiled the rope, which is supposed to be 52.5 feet long, as the instructions said not to apply power to it when it was coiled up.  I attached male spade lugs to the free end of one of the power cords, made my best guess as to the polarity of the rope, attached the power cord to one end of the rope, plugged the spade lugs into the two red wires in the chase, and turned on the switch.  Voila, I had guessed correctly on the polarity.  I checked the full length of the rope and all of the LEDs appeared to be working.  I need to check the length of the rope tomorrow to make sure it is the correct length.

The rope light came as a kit that included power cords (10), end caps (10), center connectors (10), and mounting clips (50).  This should be enough material to eventually redo all four of the fluorescent cove lights and add lighting around the inside face frame of a closet or two.  The lower portion of the center rear closet does not currently have any lighting and the main closet in the bathroom could certainly use more/better lighting.

I tried installing the mounting clips without much success.  It was night by this time and dark enough in the hallway that I couldn’t really see what I was doing.  As much as I wanted to the have this fixture functioning before I quit for the evening, I knew I had reached the end of this work for the day.  Rather than frustrate myself, and perhaps mess up something, I cleaned up my tools and materials and made dinner.  I had a Thai Kitchen Hot and Sour Rice Noodle Soup Bowl to which I added chopped up fresh mushrooms.  It was just the thing for a chilly evening.  I gathered up the day’s dishes and took them in the house to put in the dishwasher and then locked up the bus for the night.  I put another coat of flat black paint on my mounting board and then turned in for the evening to work on e-mail and this post.

2014/11/19 (W) Radio Woes

I was up a little earlier than usual this morning and rather than start the day with breakfast I sprayed another coat of paint on the oak board that I plan to mount to the windshield center pillar and use as a base for various cockpit accessories.  With that task completed I gathered up my cooking/eating utensils from the dishwasher and went out to my bus where I made a five cup pot of coffee and had some homemade granola for breakfast.  I then got to work on the LED lights for the hallway cove.

20141118-09586

The space in the driver side rear corner of the bus. Access is difficult and it is full of wires, relays, and the bedroom a-c evaporator and blower.

I still had trouble mounting the plastic mounting brackets due to the lack of room to work but eventually figured out that I could create enough of a hole with my center-punch to get the screw started by hand.  Because of the design of the chase I mounted two clips at each end and two in the middle.  I started from the rear end of the chase, laid the LED rope into the mounting clips closest to the wall, brought the tube around and laid it into the other set of clips and capped the end.  I inserted the two pins of the power connector/cord into the free end, turned on the power, and voilà, I once again had a functioning hallway light.  I reattached the fascia board and double checked that lights still worked.  They did, so I moved on to the next task.

The other three fluorescent ceiling cove light fixtures will be much more difficult to convert due to access limitations, but they are still working, at least for now, so I will leave them as is.  I decided to add some of the LED rope light to the lower part of the bedroom center rear closet as it does not have any lights.  (The only light is a single incandescent bulb fixture on the ceiling and the light from that is blocked by the self.  Duh.)  I mounted three clips inside the vertical stiles so as not to interfere with the door hinges.  I cut and mounted 32″ LED rope light segments, inserted the power cord pins, and mounted the rope with the power cord at the top.  An existing hole in the front corners of the shelf allowed me to pass the free end of the power cords up into the top part of the closet which has the aforementioned light fixture controlled by micro-switches on each door.  I un-mounted the existing light fixture from the ceiling and identified the +/- 12VDC lines feeding it.  I separated the two conductors on the free ends of each power cord and stripped them.  I then cut the two wires feeding the ceiling fixture and stripped the ends.  I reconnected all of the +12 wires with a wire nut and then did the same for the -12 (DC ground) wires. (This kind of work is easier to describe than it is to do, and probably takes less time.)

As long as I was working in this closet and had the access panel removed for the driver side rear corner I decided to mount the TuneTrapper FM antenna for the bedroom radio and connect it to the radio.  I mounted the antenna to the ceiling just aft of the ceiling light fixture using mounting tab cable ties.  I passed the coax through the a-c return air opening, down to the radio, and plugged it in.  I turned the radio on but only got static and squeals.  I scanned for stations but never heard one.  This radio worked the last time I used it, and did not even have an antenna connected to it, so I am not sure what has happened and will need to investigate this further tomorrow.

By the time I finished all of this it was getting dark.  I had complied a short shopping list throughout the day.  Butch needed to go to Logansport but Bill had shown up to work on Brittiny’s car so Butch felt he had to stay home.  There wasn’t much else I could do so I drove into Logansport and stopped at Home Depot, Rural King, O’Reilly’s Auto Parts, and Martin’s grocery store.  Home Depot finally had two of the 12″ x 12″ return air grills I needed for the bedroom air-conditioner return air project.

While I was in Logansport I was finally able to retrieve a voice message from Gary Hatt, the publisher of Bus Conversion Magazine, and call him back.  I also called Linda to see how her day went.  I got a call from Butch asking me to pick up an order from O’Reilly’s.  While I was there I looked at car radios but did not buy one.  The situation with the bedroom radio is that it is an old two-post automotive style.  They have not been made for years, having been replaced with the 1-DIN and 2-DIN form factor units, except for a couple of specialty companies that make “vintage style” radios for vintage vehicles.  Because that is a very specialized market the radios command correspondingly high prices.  I will modify the panel where the radio is mounted before I buy something like that.

When I got back I unloaded and stowed my groceries.  I then took one of the return air grills back to the rear closet to check the fit.  It was too big; way too big.  I measured it and it was 14″ x 14″.  Apparently the 12″ x 12″ on the label referred to the louvered area not the outside dimensions.  I will be making a trip back to the Logansport Home Depot first thing tomorrow morning.  I think they have a 10″ x 10″ grill which should measure 12″ x 12.” If that is the case it will fit perfectly.

When I got back to Twelve Mile I chatted with Butch and Bill for a while and then turned in for the night.  I got online and registered the Ridgid drill/driver I bought last Saturday.  It has a limited Lifetime Service Agreement, but only if properly registered.  I then wrote this post and went to sleep.

2014/11/20 (R) Instant-Hot (Not)

My schedule has been shifting gradually since I brought the bus to Twelve Mile, Indiana at the end of September.  In spite of it now getting dark by 6 PM I have been working on the bus later into the evening.  This is partly due to the fact that I am working on inside projects and usually have ample artificial lighting.  I did not get started checking e-mail and writing yesterday’s blog post until 11 PM and I did not turn the lights out until 2 AM.  I typically get 7 hours of sleep a night, and true to my nature, I work up at 9 AM this morning.  I had already planned to head to Home Depot in Logansport as soon as I got up, and by the time I was dressed I decided to skip breakfast and just go.

Center rear bedroom closet with LED rope lights in bottom and TuneTrapper antenna in top on ceiling.

Center rear bedroom closet with LED rope lights in bottom and TuneTrapper antenna in top on ceiling.

I returned the 12″ x 12″ return air grills (that actually measured 14″ x 14″) and bought a pair of 10″ x 10″ grills (which actually measured about 12″ x 12″).  It was 10:30 AM when I got back so I went across the street to Small Town Brew and got a cup of coffee rather than take the time to make my own pot and then have to clean it up later.  I had a nice chat with Lisa Paul (the owner) and Harold, who appeared to be an elderly farmer but I could not tell if he was “retired.”

I took the new grills inside to the parts room to see if the square pieces of 1/4″ hardware cloth I cut and painted flat black would fit inside the lip of the grills.  I had to trim about 1/4″ off of two adjacent sides on each piece.  I took everything out to the bus and got the passenger side cloth/grill installed fairly easily.  The driver’s side was another story.  First I had to drill a hole above the top edge of the grill for the TuneTrapper FM antenna coaxial cable.  The opening on this side was slightly larger than on the other side and I could not get both screws, one center top and one center bottom, to bite.  I found a piece of scrap 1×1 in the warehouse and cut a 6″ length on Butch’s chop saw.  I drilled two holes through it and used wood screws to secure it to the top of the opening.  I was then able to screw the grill in place with the hardware cloth underneath it.  I also had to work left-handed, which didn’t make the job any easier.

I vacuumed up all of the sawdust, wood splinters, and carpet fuzz from all of the cutting and drilling I had done in this area in the last few days.  The grills are white but I decided not to paint them as they are inside a closet.  I installed them with the louvers facing the rear of the closet so when the doors are open you cannot see through them into the space behind.  They look OK and, more importantly, will allow unrestricted airflow into the squirrel cage blower on the bedroom air-conditioner evaporator.

As long as I was working in the rear closet I coiled and secured the extra length of FM antenna coax.  I then located the speaker wires for the radio.  There were wires for four speakers, which I presumed were the two in the bottom of the overhead cabinet in the bedroom and the two under the wall cabinet in the bathroom.  All of the power wires were also part of that harness.  I was not able to determine why the speakers quite working, so I disconnected all of the wires from the radio, removed the knobs, retaining nuts, and faceplate, and took it out of the panel from the rear.  There are a LOT of wires behind this panel and it was not easy to get the radio out.  (The radio is mounted in a panel next to an alarm clock and under a row of pushbuttom switches.  This panel is installed under the main 240/120 VAC house electrical distribution panel, above which is the evaporator/blower portion of the bedroom air-conditioner.  That’s a lot of stuff with a lot of wires in a place that is difficult to access; another brilliant Royale Coach conversion feature.)

The evaporator is installed with the coils not centered in the opening.  In particular there is a 1″ gap along the bottom edge and a similar opening along the top edge.  The problem with this is that it provides a very direct path for air coming out of the unit to be drawn back in rather than coming from the return air grill.  I purchased two different sizes of foam weather seal at Rural King intended for sealing around the edges of a window mounted air-conditioner.  I cut appropriate lengths of this material and secured it in place using double-sided tape I got from Fonda.

I decided to mount the indoor/outdoor thermometer on the wall between the refrigerator and the house systems panel.  It only needed one small screw and a small piece of double sided tape towards the bottom to hold it to the wall.  It’s a nice location and should give a more representative temperature reading, being on an interior wall at eye level and not in direct sunlight or near the kitchen counter where the cooking gets done.  It’s also next to the refrigerator so it should have a strong signal from the outdoor remote sensor, which we keep on the middle shelf of the refrigerator compartment.  As long as I was fiddling with this, I changed the batteries on the remote sensor and the base unit.

I checked in with Butch and Fonda to see if they needed my help.  They were also working on inside projects, both bus and house, and did not need my assistance today.  If they do need my help they know where to find me and are not bashful about asking, but I still like to check in with them several times a day.

My next task was to remove the Insta-Hot water heater from the kitchen sink.  It has never worked since we got the bus, which is to say no water comes out of it when I depress the lever.  I also have no idea if the electric heating element still worked as we have had it unplugged.  I shut of the water pump and closed the primary cold water inlet valve and both the inlet and outlet valves on the new water filter.  I loosened the 3/8″ tube compression nut on the supply line and pulled it loose from the supply T.  I purchased two 3/8″ compression caps yesterday at Home Depot.  I applied Teflon tape to the threads on the T, screwed a compression cap on, and tightened it.  I re-pressurized the line, checked for leaks, and found some.  I tightened the cap more but I could not get the leaks to stop.

I again shut the pump off, closed all of the relevant valves, and opened the filtered drinking water faucet to relieve the pressure.  I borrowed Butch’s Teflon pipe thread sealant, cleaned the Teflon off the threads on the T, applied the sealant, and screwed the second cap on.  I tightened the cap and re-pressurized the system.  It leaked worse than before.  I tried to tighten the cap more and the leak got worse.  It was time for plan B.

The hose coming out of the new water filter feeds a T from which a line went to the Insta-Hot.  The other end of the T is connected via 3/8″ tube to a second T.  One line from that T supplies the drinking water faucet.  The end of the second T feeds the line for the ice-maker in the refrigerator, which we have valved off behind the fridge and unplugged.  The first T was no longer necessary and the second T wasn’t really either.  Given that I could not cap the first T successfully I decided to remove it.  That left the second T with a short length of 3/8″ tube with a compression sleeve and nut already in place.  The hose coming off the output side of the new filter housing was long enough to reach to the second T.  I snugged up the compression nut and restored pressure to the system.  No leaks!  Hurray.

My final project for today was wiring up a 120VAC outlet in the bathroom closet for the InterVac built-in vacuum cleaner.  The vacuum cleaner is installed in the hallway wall just to the left of the refrigerator and below the house systems panel.  The bathroom closet is on the opposite side of that same wall.  The closet has a false bottom with a removable panel that provides access to a 6″ deep space full of wires, hoses, and heaters.  Of particular interest to me was the Cadet electric toe-kick heater which runs on 120 VAC (~10 Amps) and is on its own circuit breaker.

I removed the access panel and then removed the thermostat knob and the front cover/grill (two screws) from the toe-kick heater.  I removed two more screws and the heater slid out the front of the toe-kick board.  I removed four small screws, took the top cover off, disconnected the power wires, and pulled them out the back of the unit.  I got a surface mount duplex outlet and a square metal junction box (with cover plate) from Butch.  I drilled a hole through the bottom of the closet next to the rear wall that was tucked under the shelves to the right.  I cut a two foot length of 14-2+g NM cable and used it to wire up the surface mount outlet.  I fed the wire down through the hole, and screwed the outlet to the rear wall.  I installed a strain relief in the back of the Cadet enclosure, cut a two foot length of 12-2+g NM cable, routed it into the Cadet, and completed the AC power connections.  I then put the top cover back on, slid the unit back into the recessed toe-kick, secured it in place, and put the cover/knob back on.  I routed the original power cable and the two new cables into the metal junction box, made all of the electrical connections, and put the cover plate back on.  I put the cover on the new outlet and plugged in the InterVac power cord, which comes out of a grommeted hole in the back wall of the closet.  I turned the circuit breaker on, turned the heater thermostat up, and it came to life.  I turned the thermostat back down to shut the unit off and turned the vacuum cleaner on.  It worked too.  I put the access panel back in place, gathered up all of my tools and supplies, and then swept up all of the construction debris.

The refrigerator has been running a bit colder than I would like so I made small adjustments throughout the day.  The unit was suddenly running at 44 degrees instead of the 35-37 degrees it had been indicating.  I removed the thermometer base unit from the wall and set it up in the refrigerator next to the remote sensor.  I will check it in the morning and see if they are in agreement.

Linda called around 8:30 PM and Butch came out to let me know.  We chatted briefly and I went back out to the coach to finish up and have a light dinner salad.  I wrapped up at 10 PM, locked up the bus, and went into the house.  Butch and Fonda had already turned in for the night.  Their oldest daughter, Gene, is getting married tomorrow in Indianapolis and they would be leaving early in the morning.

2014/11/21 (F) Wedding Bells

I set my alarm for 8 AM to make sure I was up and dressed before Butch and Fonda had to leave.  Gene, the older of their two daughters, was getting married at 4 PM today in Indianapolis and there were a few details I had to go over with Butch and Fonda before they left.  They were still getting ready so I went across the street to Small Town Brew to have a cup of coffee and chat with the proprietor, Lisa Paul.

The first of two return air grills that allow air to pass through the upper portion of the center rear closet.

The first of two return air grills that allow air to pass through the upper portion of the center rear closet. The TuneTrapper FM antenna is visible upper right.

When I returned to the house Fonda showed me how to operate their washer and dryer and the various additives she uses.  She pre-measured the food for the dogs and told me what time to feed them, when they needed to be taken outside, and the policy on “cookies” (dog biscuits).  Butch gave me a house key so I could come and go as needed.  He found some audio speakers that might be useful in diagnosing the problem with the bedroom radio.  He also found a multi-probe digital thermometer that I could use to check the temperatures of the bus refrigerator and freezer compartments and ambient room temperatures against the Indoor/Outdoor thermometer we use for that purpose.  They loaded up the car at 9:30 AM and left to pick up Bill Tharpe in Mexico (Indiana).  Bill was flying out of Indianapolis to meet a friend in Arkansas (state of) and drive her back to Indiana and the timing was such that he could catch a ride down to the airport with them.

As soon as they left I sorted my laundry into lights and darks and loaded the lights into the washing machine.  I used my own detergent, which is free of dyes and perfumes, as years ago I had a bad reaction (contact dermatitis) to a name brand liquid laundry detergent.  With the laundry started I took the digital thermometer to my bus and had breakfast.  I read the directions for the thermometer, plugged in the probes, and turned it on only to discover that the 9V battery was low (depleted) and needed to be replaced before I could use the instrument.  It was a cool but sunny day!—a nice day for a drive—so I locked up the bus, transferred the laundry from the washer to the dryer, locked the house, and headed to Walmart in Logansport.

I was back in an hour, by which time the dogs needed to be taken outside.  With that chore done I put the second load of laundry in the washer and restarted the dryer on the driest setting.  I put the new 9V battery in the digital thermometer, plugged in the three probes, and turned it on.  I put one probe in the freezer, left one buy the counter (for ambient air temp) and put one in the fridge next to the base station and the remote sensor.  The digital thermometer is accurate to 1/10th of a degree Fahrenheit.  It is a serious piece of test equipment that Butch used for professional HVAC work, so I regard the temperature readings as correct compared to our indoor/outdoor consumer unit.  For the rest of the day I kept a log of the time and temperatures each time the refrigerator compressor started and stopped.

After studying the manual for the bedroom radio, a Kenwood KRC 3004, I worked for a while on the bedroom control panel where it was mounted.  After struggling with getting the radio out yesterday I realized today that the wood bezel surrounding the panel was removable, allowing the whole panel to come out and providing easier access to its back side and the wiring behind it.  That did not change my opinion about the design of this aspect of the bus conversion; it simply was not done with the idea that it would ever have to be worked on.

I had disconnected the harness for the four speakers powered by this radio yesterday so I checked at the connector for proper resistance and shorts.  Each speaker measured around 4 ohms (DC) and none of the negative lines were shorted.  (Technically the 4 ohm rating on a speaker is an AC impedance, not a DC resistance, but the resistance reading told me there was a complete circuit from the connector through the two wires and the speaker coil.)  The power supply wires appeared to be in tact so I reconnected the radio and turned it on.  I heard some static and could “move” it from the bedroom to the bathroom with the front-rear fader control but as soon as I tried to turn the volume up the speakers went dead.

This was starting to sound like a volume control component problem so I removed the top cover of the radio.  The volume control was a component about 1/2″ square and 3″ long mounted to a vertical circuit board on the left edge of the chassis.  There wasn’t much I could do with that but tomorrow I may spray it with some De-Ox-it just for grins and giggles.

I interrupted my work around 4 PM to feed the dogs and take them outside.  I was thinking about what to work on next and remembered that the latch side stile of the left closet door in the bathroom was coming loose and was difficult to latch.  I needed two “L” brackets to reinforce the upper and lower corners on the inside of the door where the stile connected to the top and bottom rails.  For the second time today I locked the bus and the house and headed to Logansport.  This time my destination was Home Depot, but it’s adjacent to the Walmart so it was still the east end of town.  I also went to Radio Shack, in McCord’s Do It Best Hardware, looking for a replacement radio but they do not sell car radios anymore.

I called Linda while I was in town and described the work I was doing.  She sent me a TXT message with data on our refrigerator at home.  Over the course of an hour the compressor cycled 7 minutes on, 13 minutes off.  That was useful information. That’s a duty cycle of about 1/3 or 33%.  Our bus fridge duty cycle was ~60% (30 minutes ON, 20 minutes OFF).  I think our home fridge is more like what I would expect, but I will discuss this with Butch.  What bothers me the most is how long the bus fridge runs when it comes on; 4x as long as the house fridge.

By the time I got back it was dinnertime.  I heated a Tofurkey Italian sausage with some diced onion and used it as a topping for a plate of salad greens, along with some roasted peanuts and raspberry walnut vinaigrette dressing.  I then worked on the bathroom closet door while I continued to monitor and record the refrigerator and freezer temperatures.  I also repositioned the ball catches on the door so it now closes easily and latches securely.

I was watching the data from the digital thermometers and happened to be looking at the readings from the one in the freezer when the cycle ended.  The temperature was around 0 degrees F and as soon as the compressor stopped running I watched the temperature climb 1/10th of a degree every few seconds.  The compressor seemed to come back on when the freezer reached a temperature of 10-to-12 degrees F.  If I presume a 10 degree rise (to keep the math easy) and the off time is 20 minutes, the freezer is heating up 1 degree F every 2 minutes (120 seconds).  That’s 1/10th of a degree every 12 seconds, which seemed pretty fast to me.  I also noticed, however, that the temperature in the refrigerator compartment continued to drop a few tenths of a degree after the compressor stopped, so perhaps that’s where the cold from the freezer was going.

How a refrigerator cycles depends on a number of factors: the efficiency of the unit, the ambient temperature, where the controls are set, how much and what kind of stuff is in the freezer and fridge compartments, and how often the doors are opened and for how long.  I don’t have any food in the bus freezer but there is plenty of mass in the form of containers of frozen water.  I don’t have much food in the bus fridge compartment either, but I have a lot of bottled water, “milk”, O. J., salad dressings, mustard, etc. and I have it distributed from top to bottom, including the door shelves.  I have the thermometers on the second shelf from the top.

I had spent quite a bit of time earlier taking voltage measurements on the push-button switches in the bedroom control panel in an attempt to figure out why the aisle lights were not working.  I was fairly certain this was a 3-way circuit with a second switch.  I found the “other” switch by the dinette, changed its position, and voila, the aisle lights worked!  For some reason that switch, the rearmost switch by the fake plant, appeared to not be wired as a 3-way with the one in the bedroom but rather to be in series with it; both switches have to be on for the lights to work.  That may not be how they are wired, as there could be a relay involved, but that’s how they behave.

I wrapped up my work for the day at 8 PM, locked up the bus and went in the house.  I took the dogs out and then gave them each a treat.  I folded and packed my clothes and then settled in to write while I waited for Butch and Fonda to get home.  They arrived at 10 PM and we chatted for a while about the wedding/reception, refrigerators, and radios before finally turning in for the night at 11 PM.

Bus bedroom driver side rear corner house systems control panel with Kenwood KRC 3004 radio removed.

Bus bedroom driver side rear corner house systems control panel with Kenwood KRC 3004 radio removed.

2014/11/22(S) T Minus 2

…and counting.  Today was my second to last day to work on the bus in Twelve Mile, Indiana.  Except for a few days in October, the first full week of November, and some weekends, I have been at Butch and Fonda’s place since I brought the coach here on September 30.  We have gotten a lot done on both buses in that time, but not everything on either list.  As much as I wanted to avoid a last minute scramble, there was still too much to do to take the weekend off.  I was up at 7 AM, took a shower, got dressed, finished yesterday’s blog post, and got to work.  I stayed busy until 10 PM, with short breaks to have a bite to eat and one trip to Logansport late in the afternoon.

My major accomplishment today was mounting the oak board to the center windshield pillar and then mounting the magnetic compass and Pressure Pro TPMS receiver to it.  I needed a standoff to mount the inclinometer, so I cut two pieces of 1×1 and spray painted them flat black.  I will finish mounting the inclinometer tomorrow, and possibly the inside rearview mirror.

My other major project was the removal, disassembly, diagnosis, repair, testing, and reassembly of the driver’s side motorized windshield roller shade.  Fonda helped me remove it and Butch helped with the rest of the process.  It appears that the problem was a soldered connection to the internal motor that failed.  I will reinstall it tomorrow, probably with Fonda’s help, and try to correct some alignment problems in the process.

I sprayed the on/off/volume control in the Kenwood KRC-3004 radio with De-Ox-It and left it to dry.  I came back later, plugged the connector into the back of the radio, and turned it on.  Nothing, nada, zip; zero sound from the speakers.  I suspect the volume control or the final output transistors have failed.  Either way I am not likely to get it repaired.  While I tend to think of Kenwood as good equipment, both of the radios in the bus have something wrong with them.  The front radio is obviously newer as it has a 1-Din form factor.  This will also make it easier to replace when I get around to it.

The bedroom radio is an old style unit with two shafts that are used to mount it and control most of the functions plus a center section for the cassette player, LCD display, and a few buttons.  This style of radio is now considered “vintage.”  There are at least two companies that make modern radios in authentic vintage form factors, but they are very pricey and targeted at the vintage restoration market.  Putting a modern 1-Din form factor radio in the bedroom panel will require me to cut the appropriate size opening.  Since the panel has 10 switches mounted in it creating the opening will be non-trivial.  A better option would be a remote radio with a slim profile control head, like the one Butch has from Custom Autosound.  The control head would cover the center opening and I could mount switches in the two shaft holes.  I thought of that riding to Logansport.  Our trips to town are often useful that way.

Another thing I did today was continue to monitor and adjust the refrigerator.  Since I spent much of the day working in the bus I was able to log the time of day and various temperatures each time the compressor started and stopped.  I missed cycles, of course, as I was in and out of the house or gone to town, but I think I got enough data to determine if there is a consistent difference between the indoor/outdoor sensors and the more accurate Cooper Instruments SH66A digital thermometer, and if so, how much and in what direction.  I also have useful information about the settings of the refrigerator (thermostat) control and freezer (air control) for the temperatures I want to maintain in the two compartments.  I will continue to monitor tomorrow as I wrap up my last few tasks and organize the bus for travel.  I entered the raw time and temperature data into an Excel Spreadsheet but did not have time to analyze it.  Big day tomorrow; have to get to bed.

Bus bedroom DS rear corner house systems control panel removed.

Bus bedroom DS rear corner house systems control panel removed.

2014/11/23 (N) T Minus 1

Today was my final day working on buses in Twelve Mile, at least until we return here a week from today.  The temperature continued to be mild but by noon it was raining.  I had breakfast and got to work as I had a long list of little things to take care of today.

I continued to monitor the refrigerator/freezer temperatures and record them while working on other projects.  I taped a piece of cardboard to the back of the bedroom control panel to cover the holes where the radio used to be and reinstalled the panel.  I reinstalled the driver side access panel in the lower rear closet and then vacuumed up the sawdust and other construction detritus.  I started organizing the inside of the coach for travel, getting things in boxes and getting the boxes on the floor on the two front sofas.  Twelve Mile now has a large recycling container that accepts mixed recyclables, so I carried several bags of plastic, cardboard, and cans over there rather than haul them back to the house.

Automotion shade with motor removed from end of roller tube.

Automotion shade with motor removed from end of roller tube.

Steve showed up mid-morning and helped Butch install a new AM/FM radio and CD player in the MC-9.  They also came over and helped me reinstall the driver side windshield roller shade. We tested it and it worked.  I like it when that happens.  I wasn’t as lucky with my mounting arrangement for the inclinometer.  I ended up modifying one of the pieces and then had to repaint the two ends flat black.  I left it to dry and busied myself with getting the bus ready to go to Gallahan’s Truck Stop for fuel.  I had turned the electric block heater on earlier so I turned it off and turned on the Aqua-Hot engine preheat pump.

I used Butch’s portable air compressor to air up the chassis (suspension, brakes, and engine accessories) and used his auto shop compressor to adjust the inflation pressures of the tires.  I have the 12VDC accessory outlets in the cockpit powered off of the house batteries, so I immediately checked the Pressure Pro TPMS sensor readings against the known pressures in the tires.  The correspondence was as follows (actual:sensor):  DSF (116:112), PSF (116:111), DSOD (95:92), DSID (95:91), PSOD (95:91), PSID (95:91), DST (85:83), PST (85:83).  All of the sensors are reading low from 2 to 5 PSI.  I need to create a little card to go by the display unit with these calibration adjustments.

Butch had to take Steve to Rochester to meet up with his wife and I was just getting ready to lock up the buildings so I could drive the bus to Gallahan’s when Fonda returned from church.  I stowed the folding step stool in the back of the car, unplugged the electrical shoreline and stored it just inside the warehouse overhead door, disconnected the portable air-compressor and stored it in the parts room, and turned off the Aqua-Hot (anything with an open flame is a no-no at a fueling station).  I fired up the engine and was about to leave at 1 PM when Butch returned.

I drove to Gallahan’s in light rain.  The new speedometer/odometer worked as intended, and I did not get a Check Engine Light (CEL) during the trip out and back.  I discovered, however, that my transmission retarder was not engaging.  I suspect that has something to do with removing and reinserting the cable connectors on the DDEC II when I was trying to diagnose and fix the Fuel Temperature Sensor Voltage High code problem.  Not having the transmission retarder is not a good thing, but there wasn’t anything I could do about it today.  I will probably try to figure this out on Monday, December 1st while we are parked back at Butch and Fonda’s awaiting our group departure for the southwest U. S.

When I got back from Gallahan’s I pulled the bus in front of the automotive garage so I could pull the car up behind it.  A lake was forming behind the bus, so I pulled up farther.  Butch has a 30 A RV outlet on the front of the garage, which was plenty of power for the unoccupied bus.  I moved all of the stuff I had stored in the parts room to the overhead door for the woodshop, which is directly behind where I normally park the bus.  I backed the car up to the door close enough that I could open the rear hatch and load everything into the back of the car while staying out of the rain.  I packed up clothing I was not going to need and loaded that in the back as well.

Once the car was loaded I pulled it around behind the bus and hooked it up for towing.  By this time there was a hard, steady, rain but I just worked through it.  All of the lights tested as good and the bus/car combination was ready to roll tomorrow morning.  I turned on the Aqua-Hot and turned up the heat while I prepared a couple of tofu hotdogs for a late lunch / early dinner.

Magnetic compass mounted to the oak board on the center windshield pillar.

Magnetic compass mounted to the oak board on the center windshield pillar.

I re-mounted the inside rearview mirror high enough that I will not bump my head on it like I used to.  I retrieved the mounting part I had spray painted earlier and tried to finish the installation of the inclinometer, but could not get it to work.  I will either have to take the case apart to get the mounting bracket loose or I will have to rethink/re-engineer how I mount it.  That was my last project.  I would rather not have ended on a note of failure, but it meant I have at least one project to look forward to.  I gathered up a few cooking/eating utensils, my camera, and a notepad, shut off the lights, and locked the door on the way out.

Back in the house I took a hot shower and put on some dry clothes.  I loaded all of the wet/soiled clothes in the washer and Fonda did a small load of laundry for me, transferring it to the dryer as well.  The three of us chatted while they ate dinner.  Linda called at 8:30 PM and we discussed the weather forecast for tomorrow, which, while well above freezing (to start) was less than ideal with rain and high wind advisories.  I decided to try for an earlier start than I originally planned.  With any luck I can be at Martin Diesel by 9:30 AM and on the road for home by 2 PM.  That would get me back to the house while it’s still daylight.

 

2014/11/10-16 Even More Bus Work

2014/11/10 (M) New Heights

We rarely set wake up alarms anymore, one of the major perks of retirement, but ‘rarely’ does not mean never so this morning my alarm went off at 5:05 AM.  I grabbed a quick shower, got dressed, and got busy pulling everything together for the trip to Twelve Mile, Indiana.  I had hoped to be on the road by 6 AM but did not quite make it.  Linda left at 6:15 AM for a 7:30 AM medical appointment and I had the car packed by 6:30 AM and pulled out shortly after that.

The drive always takes me about five hours including stops.  Butch called me around 10 AM to let me know they were in Logansport and would not make it back to the house until mid-afternoon.  I was going to stop in Rochester anyway to buy groceries so I had lunch first and then took my time shopping.  From Rochester I took IN-25 south and stopped in Fulton to buy fuel.  The street I normally turn on is Aitken and the filling station was at the intersection with IN-25 so I headed east to Meridian Street and then south to IN-16 and finally east to Twelve Mile.

New ride height linkage (L) with ball ends.  Old linkage (R) with rubber ends.

New ride height linkage (L) with ball ends. Old linkage (R) with rubber ends.

I pulled up in front of the bus at 12:30 PM and unloaded all of the groceries and bus parts from the car and put them in the bus.  I changed into my work clothes and started working on inside projects.  First up was resetting the clocks since the switch from EDT to EST occurred while I was away.  I then emptied the cabinet above the refrigerator, which is currently used to store cleaning supplies, in preparation for installing an under cabinet florescent light fixture against the ceiling.  I was investigating the details of that little project when Butch and Fonda got home.  With the house now unlocked I finished unloading my car and moved my clothes and technology into the guest bedroom, which is where I stay when I am here working on buses.

Butch had fabricated one of my ride height linkages while I was away.  He made a second one and then I gathered up tools and my camera to install them while he finished the last one.  Fonda found a large sheet of corrugated plastic that made it much easier to slide under the bus to work.  The front one was easy to install, just as it had been easier to remove.  The rear ones were even more difficult to install than they were to remove.  I got the rear protection shields back on with Fonda’s help.  Some jobs just require more than two hands.

New ride height linkage ball end and mounting bolt.  Old linkage end visible upper right.

New ride height linkage ball end and mounting bolt. Old linkage end visible upper right.

Bill Tharpe showed up to help Butch work on Brittiny’s car.  Butch and Bill had retrieved it a couple of days ago with a car hauler trailer when it quit running.  It was leaking coolant and apparently needed a new intake manifold gasket.  Bill spent most of his time disassembling the top of the engine so he can eventually remove the manifold.

Although I bought fresh salad greens on the drive down it ended up being a long day so I prepared a Simply Asia Mushroom Noodle Soup Bowl for dinner along with a few grapes.  Linda called at 8:30 PM and we chatted about her audiology and ENT appointments this morning.  The audiologist said her hearing in her ‘good’ ear was essentially unchanged from four years ago, which was good news, and she had a great visit with Dr. Siedman.  I chatted briefly with Butch about the fair weather ‘to do’ list for tomorrow and then we all turned in for the evening.

2014/11/11 (T) Code 23

I was up at 7 AM and in my coach by 7:30 having a simple, but yummy, breakfast of orange juice and homemade granola with unsweetened soy milk.  With all of the projects I have going on I have very little space at the moment to prepare food or sit and eat so I decided to forego making coffee and walked across the street to Small Town Brew to get some.  Lisa (the shop owner) was there so we had a nice chat.

New ride height linkage installed on front axle and leveling valve.

New ride height linkage installed on front axle and leveling valve.

The weather forecast indicated that the best part of the day was going to be the morning with the high temperature of 54 degrees F at noon and then falling steadily with a rapidly increasing chance of rain.  I had two outside tasks to accomplish on my bus today so I wanted to get them done in the morning if possible.  My first task, however, was to attach the stinger (or whip, the long slender flexible piece at the top of an amateur radio antenna) to the base screwdriver portion of Butch’s mobile HF ham antenna.  I was able to do this from his ladder and did not have to get up on the roof.

While I worked on the antenna Butch prepped their new motion-sensing patio light.  He installed it over the entrance door to their bus with Fonda’s help.  With his assistance I removed the new fan belt from my engine, removed the two old air-conditioning compressor belts, and installed the two new a-c belts.  It was obvious from the extra slack in the inside belt that the a-c compressor was out of alignment with the pulley on the engine.  Butch suggested that we take the new belts off rather than ruin them and put the old ones back on until we can align the compressor.  That made sense to me, so that’s what we did, finally putting the new fan belt back on.

The drive side rear ride height linkage was not easy to get to with the dual drive tires on the axle.

The drive side rear ride height linkage was not easy to get to with the dual drive tires on the axle.

In the process of changing the belts I tried to us the valve that either tightens the belts when the engine is running or retracts the belt tensioners when they need to be changed.  The retract position did not appear to work and after looking at how the valve was plumbed Butch and I were of the opinion that it may not be connected correctly.  The run/tighten position works as intended, extending the air-driven belt tensioners, but it would sure be nice to be able to turn the valve and have the belt tensioners retract as intended.  I’m going to have to find out more about this valve and re-plumb it if necessary.

Butch and Fonda had to take some time to move things out of their warehouse for someone who is coming by to purchase them.  While they did that I started working on the DDEC II code 23 (Fuel Temp Sensor Voltage High) problem.  I got the diagnostic procedure from Chuck over the weekend.  The first step was to remove the harness from the sensor, short out the two pins, turn on the ignition (but do not start the engine), and see what Active Codes the ECM (DDEC II) generates.  That sounded simple enough but unfortunately the Fuel Temperature Sensor is located on the right side of the fuel pump under the ECM and behind a coolant pipe.  The only way to get to it is to unbolt the ECM mounting plate from the block and lift it up, which it turn requires all of the harnesses to be unplugged from the ECM.  Again, simple enough in concept but more difficult in practice.  Once I could get to the sensor and disconnect the harness I had to figure out a way to jumper across the two sockets.  I ended up using two pieces of small solid wire inserted into the connector and then bent to give me something to connect the alligator clips to.  Fonda helped with all of this.  Again, it was more than a two-handed job.

Access to the passenger side rear ride height linkage was a little better, but not great.

Access to the passenger side rear ride height linkage was a little better, but not great.

I turned on the ignition and read the Active Codes on my ProLink and also had them flash on the Check Engine Light.  I was looking for a code 25 (everything is OK) or either a code 23 or a code 24.  What I got was both a code 23 (sensor signal and/or return wire open) and a code 24 (signal wire shorted to +5 VDC wire).  The diagnostic procedure has you check resistance between pins in either case, just different pins, so I checked both.  The readings I got did not make a lot of sense and I did not have time to pursue it further as the temperature had started dropping and it had started misting.  (I figured out later that the code 23 test requires the jumper to remain in place but I had done the code 24 test first, which required it to be removed, and not reinstalled it, so I did not do the Code 23 test correctly.)

By the time I got the ECM bolted back in place and all of the harnesses reconnected it was raining lightly and my tools were getting wet.  I got all of them put away and closed up all of the bays and decided to start the engine to make sure it would still run.  It started right up and I let it run on high idle for 25 minutes while I had a bite of lunch.  The test procedure called for clearing all codes before starting the engine and monitoring the CEL for 8 minutes, stopping the engine, and checking the historical codes.  I was clearly done working outside for the day so I did not get to do this at this time.

It was only mid-afternoon when I shut the engine off so I set to work installing the florescent light fixture in the cabinet above the refrigerator.  As with most projects this one seemed simple enough but took quite a while to do.  I was able to use an existing hole with wires running through it to snake two more wires through from the cabinet (where the fixture was going) to the adjacent cabinet to the right over the left corner of the kitchen counter.  That cabinet already had two 12 VDC light fixtures and I had previously identified the positive and negative supply wires.  What complicated matters was that the glue holding the carpet on the ceiling of the refrigerator cabinet had failed and the carpet was falling down.  The loose carpet also led to the discovery of other 12 VDC wiring hidden underneath it.  That, in turn, led to two things:  1) I had to make sure that when I mounted the new florescent fixture I did not screw through any of these wires, and 2) I had to figure out a way to keep the ceiling carpet up.

The sunset was amazing on November 10th.

The sunset was amazing on November 10th.

I taped the existing wires to the plywood ceiling so they would be in known locations.  I then used wood screws and fender washers to hold the carpet to the ceiling.  I added insulated spade lug connectors to the fixture wires and the supply wires and connected the other ends of the supply wires to the existing supply wires using special connectors designed for tapping into an existing wire without cutting it.  I would not use these for higher current applications but for a small florescent light fixture they are fine.  I attached the fixture to the ceiling with four short wood screws, installed the F13T5 bulb, turned the switch ON, and there was light!  I love it when that happens.

As long as I was working in this area I decided to reattach the incandescent fixture in the cabinet above the kitchen sink.  It was designed to be mounted with two screws but only one was in place.  Again, this turned out to be more work than it at first appeared.  The fixture is mounted to the inside of the upper cabinet face frame, not the ceiling, so there was no way to directly see what I was doing.  That meant mirrors and flashlights, and a blown fuse when my screwdriver shorted +12vdc to DC ground.  It turned out that the wiring was interfering with the mounting.  I eventually got it tucked up under the ceiling carpet and got the fixture mounted using two screws.  My documentation indicated that the upper kitchen cabinet lights were powered by wire #51.  I located that wire in the front DC distribution panel and pulled the 10 Amp fuse that protects it.  It was indeed open, which was good as it meant my documentation was correct and allowed me to find it on the first try.

The florescent light in the hallway ceiling cove quit working the last time I was here.  I removed the bulb, with some difficulty, to see what it was.  It was an F72T12 55 Watt (72″ length) with a single pin on each end.  I needed a 10 A blade fuse to replace the one I blew so I made a shopping list and headed off to Logansport to visit Walmart, O’Reilly’s Auto Parts, and Home Depot.  Since I was in town I called Linda as my cell phone does not work in Twelve Mile.  She wanted to know if I had shut off the outside water at home.  I had not, so she took photos of the valves/pipes in the utility room and e-mailed them to me.  I got a call from Butch while I was in town.  He needed a few machine screws so I picked those up.  When I got back to the house I checked the photos Linda had sent and then sent her a couple of replies which resulted in her calling the house to go through what had to be done.  She e-smiled me later that she had taken care of it.

I Replaced the F72T12 (with considerable difficulty) but it still did not work.  It was late, and dark, and I was tired, so finding and fixing the problem would have to wait until tomorrow.  Somewhere in there I had a tofu Italian sausage on a whole wheat hotdog bun with mustard and onions.  By the time I came in to the house Butch and Fonda had gone to bed.  I checked e-mail and logged in to RVillage ad saw that our “Vegan RVers (WFPB)” group was up to 100 members.  I worked on this post and then went nighty night.

2014/11/12 (W) Burrrr

The leading edge (cold front) of the polar vortex had passed through north central Indiana by the time we got up this morning.  There was a definite bite to the air, and it will get worse before it gets better, but I brought a selection of winter clothing that I can layer in various was to suit the conditions and the work that needs to be done.  All of my projects today were inside the bus or the house so I did not have to bundle up excessively.  Butch and Fonda spent a little time working on the privacy curtain system for the front of their coach but much of their time today was taken up with someone who bought a lot of metal shelving and storage racks from them.  He showed up sometime between 9 and 10 AM and brought a crew to disassemble the shelving and load everything into a trailer.  Butch had to use his forklift to help load some it.

The DDEC II ECM on our DD8V92TA with all of the harnesses unplugged.

The DDEC II ECM on our DD8V92TA with all of the harnesses unplugged.

I had cleared some space in the kitchen (of the bus) so I made coffee to go with breakfast.  That emptied out the last of three storage canisters, so I opened the three bags of custom roasted beans from Teeko’s and transferred them to the three containers.  After considering my project choices I decided to install the knob on the front TV cabinet door.  I spent a few minutes checking the installation details and dimensions of the Gaggenau halogen cooktop, which we would eventually like to replace with a built-in two-position induction cooktop if we can find one that fits the existing opening in the kitchen counter.  I had a note to get the GenSet model number for Martin Diesel so I looked that up in my documentation and found both the model and serial numbers.  I then turned my attention to the fluorescent light fixture in the hallway cove.

After studying the construction of the cove I realized that the front piece could be detached by removing seven (7) screws from underneath.  With the fascia removed I had great access to the F72T12 bulb.  I also discovered that there wasn’t an actual fixture there, just two ends to hold the bulb.  One was spring loaded and the other one was not.  The ballast was obviously somewhere else.  But where?

I vaguely recalled having seen a small metal box with wires coming out of it in the space under the bottom shelf of the pantry so I looked there and, sure enough, there it was.  It still had a label on it that was in good condition and indicated that it was a 13.2 VDC ballast for a single F72T12 fluorescent bulb.  Things were slowly starting to make sense.  There is an identical box in the back TV cabinet, with the same wires and connector but no label or markings, so I reasoned that it must power the fluorescent cove light in the bedroom.  That meant there were probably two more boxes somewhere for the two front fluorescent cove lights, although there might only be one as they are on the same switch.  Again, I vaguely recalled having seen these boxes in the bottom rear of the A-V cabinet behind the driver’s seat, so that’s where I looked first, and there they were.

Wire taps for joining a new wire to an existing wire.

Wire taps for joining a new wire to an existing wire.

It appeared that we had a bad ballast and that this would be an easy fix.  The label said the ballast was a Triad made by Magnetek in Huntington, Indiana and had the model number.  Cool.  I could drive over there and get one if I had to.  I went inside to use my iPad to search for sources of supply and found that Magnetek had divested itself of most of their product lines, including this one.  Their website gave the URLs of the various companies that acquired their product lines.  Universal Lighting picked up the DC ballast products so I tried their website but did not find one for an F72T12 bulb.  Ugh.  I searched some more and eventually found a Bodine (Philips) ballast electronic/inverter ballast that appeared to be exactly what I needed…for $98 plus tax and S$H.  Double ugh.

I would eventually like to convert most of the lighting in the coach to LEDs, so perhaps this was the time.  I found a kit with 52.5 feet of LED rope light (~10 LEDs/in) and power cords, end caps, and mounting clips to make up to 10 segments.  The description said the light pattern was 360 degrees and the illumination was 48-60 lumens per foot.  An FTC website indicated that a typical 40 W incandescent bulb puts out about 450 lumens and a 60 W bulb about 800 lumens.  Figuring conservatively at 50 lumens per foot a 10 foot length, folded back mid-point to make a five foot long light source, should give us at least 500 lumens which is plenty of light for this application.  The kit has enough materials to make four such lights and still have 12 feet to use somewhere else, such as around the inside of the face frame of the wardrobe closet in the bathroom.  I ordered it with 3-day shipping.  While I was at it I ordered an Everpure (SHURflo) ADC Full-timer bacteriostatic water filter cartridge with 2-day delivery through Amazon Prime.  I thought about ordering several, but figured I might find them cheaper in Quartzsite this winter.

There wasn’t anything else I could do on the fluorescent fixture so I decided to shorten the cable for the front OTA TV antenna and put an F-connector on the RF coax portion.  I borrowed Butches crimper with the hex jaws and opened the coax cable stripper I bought at Home Depot.  I then discovered that the RG-6 connectors I had did not fit the cable, which was smaller in diameter.  Without different connectors this would be another stalled project with my front TV unusable.  Butch told me there was a Radio Shack store inside McCord’s Hardware and Lumber so I made a shopping list and headed to Logansport.

New florescent light in cabinet above the refrigerator.

New florescent light in cabinet above the refrigerator.

Based on the connectors available at Radio Shack I determined that my cable was probably RG-59 so I got four crimp style F-connectors.  While I was in town I stopped at Home Depot for a GFCI outlet to replace the one in the bathroom, which keeps tripping.  I also spotted some packages of cover plate screws so I got one each of white, almond, and brown.  A quick stop at Walmart for some personal items and I was headed back to Twelve Mile.

When I got back Fonda was just starting to make their dinner so I went to my coach to fix a salad.  I had a large salad of power greens, fresh mushrooms, fresh strawberries, onion, peanuts, and dried cranberries with a raspberry walnut vinaigrette dressing and a small glass of Moscato wine.  I then worked on the F-connector.

It took a while, and a couple of test fits, but I eventually figured out how to strip the coax, folding back the braided shield while leaving the foil shield in place, and get the prepped cable fully inserted into the connector and crimped it.  I stripped the three control wires, secured the little bit of extra cable inside the cabinet, and then connected the coax and control wires to the back of the controller.  Twelve Mile is a long way from everywhere but I figured I would I would test my cable construction by trying to tune in a channel.  The TV was having trouble receiving channel, 16-1 HD until I moved the antenna from position 8 to position 6.  Position 8 is just to the driver side of the nose, so given how I was parked it was facing slightly east of south.  Position 6 was more ESE, and the signal was good except when a truck went by.

Tarheel HF screwdriver ham radio antenna on motorized lift mount.

Tarheel HF screwdriver ham radio antenna on motorized lift mount.

I checked with Butch and WNDU 16-1 HD turned out to be a South Bend station.  South bend is north and slightly west of Twelve Mile.  Hummm?  I swung the antenna around to position 14, 180 degrees from position 6 and roughly NW, and had an excellent signal there too (I don’t recall it being interrupted by passing vehicles).  Clearly the F-connector was on well enough to transmit a clean signal.  The only thing I can figure is that my antenna had an unobstructed view of a large house in direction 6 that provided a very usable signal that was blocked by large trucks passing by.  Either way, South Bend is over 60 miles away, so propagation must have been very good this evening.

That was enough for one day.  I gathered up my dirty dishes and camera and returned to the house.  Fonda was just loading the dishwasher so I added mine.  I chatted a while with Butch about the DDEC II code 23 diagnostic procedure and the game plan for tomorrow and then turned in to check e-mail and work on this post.

2014/11/13 (R) Thermal Underwear

I slept in this morning so I skipped making coffee and after my usual breakfast went across the street to Small Town Brew to get some.  I then got to work on one of Butch’s projects.  We kept busy today including, in spite of the cold, some outside work.  Thermal underwear helped keep me comfortable.  I went back to STB and got a second cup of coffee around 10:30 AM.

I spent the morning helping Butch and Fonda with the wire chases for the bedroom in their bus.  Each chase is a pair of boards joined at a right angle to make a horizontal bottom and a vertical side.  They will each be mounted using a pair of aluminum angles, one on the wall for the bottom and one on the ceiling for the brackets for side.  My first task was to drill holes in the aluminum angles approximately every 12 inches.  I then helped position them, drill the holes for the mounting screws, and attach them to the bus.

Testing the DD8V92 fuel temperature sensor.

Testing the DD8V92 fuel temperature sensor.

Fonda and I moved three large wooden tables from the warehouse to the now mostly empty ‘parts room.’  All three of us moved a couple of loaded metal shelving units and then Fonda and I put the wooden tables in place.  I plan to move my all of the stuff I have in the (unheated) warehouse to the (heated) parts room tomorrow.

I worked on some minor projects in my bus and had a tofu turkey sandwich with vegan mayonnaise, lettuce, and onions.  I disconnected/removed the ballast for the bedroom fluorescent cove light and used it to test the hallway fixture.  The light worked just fine which verified that it was a ballast problem and not a wiring problem.  I needed to know that before I went to the trouble of converting this fixture to LED rope lighting early next week.  I put the good ballast back in rear TV cabinet and kept working in there, starting with the installation of the knob for the TV cabinet door.

I shortened the control/coax cable for the TV and installed the crimp-style F-connector.  Unlike the front TV (which was on and receiving WNDU Ch-16 from South Bend over 60 miles away) the rear TV was not able to detect any signals at any antenna direction.  The OTA antenna for the rear TV is in the rear roof tray and the bus is backed into its parking spot, so it is more shielded from radio frequency waves than the front antenna.  The only direction that might be good is straight ahead, which is due south.  Unfortunately there are no TV towers in the direction for a long way.

Magnatek 13.2 VDC ballast for F72T12.

Magnatek 13.2 VDC ballast for F72T12.

Butch decided to install the plate heat exchanger in the bay just forward of where the Oasis Combi is installed and needed my assistance.  The plate heat exchanger will be used to tie the Combi to the OTR bus heating system (engine coolant loop).  We also discussed possible locations for the coolant circulating pump that he plans to plumb into the OTR heating lines once he determines which line is the supply and which one is the return.

I returned to my rear TV closet projects while Butch started compiling a shopping list.  After stabilizing the back piece of plywood inside the cabinet with a couple of screws I mounted the Pressure Pro Repeater to it using a couple of self-adhesive Velcro pads that came with it.  I then mounted the dual 12 VDC outlet directly below the ballast and installed a small cube relay just behind it using its built in mounting tab.  Tomorrow I plan to connect the outlets to the relay and supply it with 12 VDC to power the repeater.  I also plan to figure out a way to drive the relay from a 12 VDC source that comes on when the 12 VDC chassis battery switch is ‘ON.”  For now, though, I will connect the outlets to the NC (normally closed) contacts so that power will flow to the outlets when the relay coil is not energized.

I was pondering my next project when Fonda let me know that Butch would be ready to head to town shortly.  I was considering how I was going to enlarge the two small openings that allow air to flow from the grate in the rear TV cabinet through the upper parts of the center cabinet and into the driver side corner cabinet where the rear air-conditioner evaporator and blower are located.  At Butch’s suggestion I looked up the specifications on the Carrier air-conditioning units; 14,000 BTUs and 465 CFM air flow.  Requirements for supply and return grates?  At least equal to the square area of the evaporator coils.  The coils are roughly 9″ x 12″, as are most of the grates.  The two small openings in the side walls of the upper closet, however, are 3″ x 10″, not nearly big enough.  This is what happens when buses are converted to “look nice” instead of to “work correctly.”

Passenger side rear corner TV cabinet with ballast, dual 12V outlet, relay, AC outlets, and PressurePro TPMS repeater.

Passenger side rear corner TV cabinet with ballast, dual 12V outlet, relay, AC outlets, and PressurePro TPMS repeater.

I rode into Logansport with Butch where we stopped at O’Reilly’s Auto Parts, Aldi’s market, and Home Depot.  We ran into Bill Tharpe at O’Reilly’s and saw his car again at Home Depot.  When we got back Fonda was putting the finishing touches on their dinner so I made a salad and selected a can of Amy’s split pea soup and a can of Mandarin oranges.  I returned to my coach, cleaned up the kitchen area, and locked up for the night.  I spent a few minutes studying Butch’s MC-9 manual and finally found the diagram that identified the engine coolant supply and return lines.  That was a nice way to end the day so I retired to my room to work on this post and transfer photos from the last few days to my computer.

2014/11/14 (F) Arctic Oasis Grandma

I bought a dried fruit stolen last night at Aldi’s and had a few slices for breakfast this morning.  No animal products, of course, but a few less-than-desirable ingredients like HFCS.  Still, it was very tasty and not something Linda would be likely to buy at home.  I brewed a pot of coffee with a mix of the Cafe Europe Blend and Columbian Decaf beans from Teeko’s.  I had some with the stolen and drank the rest over the course of the morning.

Stacked plate heat exchanger to left of Magnum 4024 inverter/charger.

Stacked plate heat exchanger to left of Magnum 4024 inverter/charger.

Most of our work today was focused on trying to finish the installation of the ITR Oasis Combi in Butch and Fonda’s MCI MC-9 bus conversion, and much of that work was outdoors.  The temperature was around 20 degrees F when we got up this morning and never broke the freezing mark.  It was sunny most of the day, however, without any wind and I was dressed for the conditions so I was generally comfortable in spite of the Arctic air mass sitting on top of us.

My first task was to mount the Zone Controller to the face of the ceiling tunnel above the Combi.  I then completed the cable connections and dressed the cables.  We then pulled the #10 2+g cable from the old Aqua-Hot bay to the Combi and I completed the connections for the 120 VAC electric heating element.  We pulled two lengths of two-conductor low voltage cable from the bedroom closet to the fresh water pump, which is mounted on a vertical plywood plate on the rear wall of the bay next to the Combi.  One cable brought +/– 12 VDC down from the 12 VDC distribution panel in the closet where the negative (DC ground) was connected to the pump.  The other cable was used to route the +12 VDC back to a switch in the closet and then return it to the bay where I connected it to the pump.  With this arrangement Butch has DC + and – in the bay and can add a switch later (or use a jumper) to turn the pump on from there.  Although a bit unusual there is nothing fundamentally wrong with wiring switches in parallel; it just means that ALL switches must be off for the device to be off.

While I was working on the wiring in the Combi bay, Butch and Fonda pulled a pair of #4 welding cables from the battery compartment to the bedroom closet to provide + and – 12 VDC to the low voltage distribution panel.  He and I then pulled the remote panel cable for the Combi from the bay up into the bedroom closet.  He took care of the connections at the remote panel while I took care of the ones in the bay.

Oasis Combi Zone Controller (top).

Oasis Combi Zone Controller (top).

With the Combi wiring done I took a few minutes to move all of the parts and supplies I had stored in their (unheated) warehouse into their (heated) parts room where Fonda had cleared some shelves for me.  By the time I was done Butch was ready to move to the next part of the Combi installation; running the coolant lines.  He discovered that his insulated heater hose would not fit over the fittings on the ends of the fan-coil heat exchangers but might fit if he cut off the enlarged swaged ends.  It turned out that the insulated hose still would not fit so he made a quick run to town for regular heater hose. Sometimes bus projects are just like that and you have to figure out how to make things fit and work.

While Butch was gone I spent some time working in the back TV cabinet of my coach.  I tapped into the +/– 12 VDC wires that supply power to the fluorescent light fixture to provide power to the dual 12 VDC outlets and relay I installed yesterday.  The DC negative went directly to the outlets and the DC positive went to the common terminal on the relay.  I connected the positive lead from the outlets to the NC (normally closed) contact on the relay.  All of the relay connections were made with insulated spade connectors.

When I can get a +/– 12 VDC chassis battery cable to the cabinet I will use it to control the relay and move the outlet positive connection to the NO (normally open) terminal.  With this arrangement, the power for the PressurePro Repeater will come from the house batteries (which are rarely switched off) but the unit will only be on when the chassis batteries are on.  For now, however, we will simply have to remember to plug the repeater in when we are going to drive the bus.

That's our bus!

That’s our bus!

As soon as Butch returned all three of us got busy working on the coolant lines.  First Fonda and I pulled the insulated lines out.  Butch then fed a standard line from the front heat exchanger through the floor to the front driver side bay.  Fonda and I then fed it through the access holes to the rear driver side bay and through the floor to Butch by the rear heat exchanger.  Butch connected the hose to rear heat exchanger.  He then pulled the line back up by the front heat exchanger as we removed most of the slack in the bays and connected it to the front exchanger.  Fonda and I fed a piece of hose along the back wall of Combi bay and up into the bedroom closet where Butch connected it to the rear heat exchanger.  I then routed the hose and Butch connected it to the Combi.  Butch fed a second hose from the front exchanger through the floor and we routed that one to the stacked plate heat exchanger one bay forward of the Oasis Combi.  He connected the hose to the front exchanger and I then climbed into the bay, routed the hose with Fonda’s help, and connected it to the heat exchanger.  Butch fed another piece of hose from the Combi bay to the bay where I was working.  I attached that hose to the heat exchanger and then Butch pulled out the slack and connected it to the Combi.  At that point we had a complete, closed loop with the three heat exchangers in series.  I think that was about when the UPS truck arrived with my SHURflo Everpure ADC water filter cartridge for under the kitchen sink.

It was time to make it work; sort of.  Butch had not tied the diesel fuel lines in yet, and the fresh water connections were also not done, but that did not matter.  The next step was to fill the coolant loop with coolant (anti-freeze) and purge it of air.  We thought we had to have at least one of the thermostat circuits active, and thought they worked by grounding the wire coming out of the Zone Controller, but figured out later that we had it backwards.  No harm done, just no good either.  Butch put the 3-way “Summer/Winter” valve in what he thought was the Summer position, which just connects the output (supply) port to the input (return) port, and turned the Bypass switch on the Zone Controller ON, activating the built-in coolant circulation pump.  The Combi was already full of coolant and in this configuration should have just circulated it internally.  Butch was watching the radiator cap and had additional coolant ready to add if any air got purged.  We could hear the pump running, but he could not see any fluid motion in the radiator fill tube.  Hmmm, yet another bus conversion mystery.

Close up of the dual 12VDC outlet and control relay in the passenger side rear corner cabinet.

Close up of the dual 12VDC outlet and control relay in the passenger side rear corner cabinet.

Butch turned the valve to the Winter position which is supposed to allow coolant to flow through the external loop.  This should have caused a drop in the reservoir level, requiring additional coolant, as the coolant was transferred to the coolant lines, but again, there was no flow.  The two heat exchangers in the house (living room / kitchen and bedroom / bathroom) have bleeder valves to help rid the system of air.  I opened the valve on the rear (bedroom) heat exchanger but that did not help.  Butch decided to call ITR for technical support.  He talked through the details of the installation but they did not have any definitive advice.

All indications were pointing towards some sort of blockage internal to the Combi and Butch thought it might be ice.  Kevin, in Washington passed Butch to Marcello at the factory in Canada, but still no luck.  We decided to turn on the electric heating element and set up a small electric space heater to warm up the bay and the unit while we went to dinner.  We drove to The Old Mill west of town on SR-16 where I ordered a mushroom, onion, jalapeño pizza, light sauce, no cheese, and extra thin crust.  It turned out quite well.  When we got back to the house we gave the Combi another try and it looked like it was going to work, but then didn’t.  At that point we called it quits for the night.  Linda called around 9 PM and we chatted briefly, catching up on the events of the day.  Grand-daughter Madeline finally called her “grandma” for the first time, so she was very excited about that, and it was good note on which to end another long, productive day.

2014/11/15 (S) Houston, We Have Ignition

I was up a little before 8 AM, had some more of the stolen I bought at Aldi’s for breakfast, and made about five cups of Teeko’s Seattle Blend coffee.  Butch and I then got back to work on the Oasis Combi hydronic heating system.

Butch was up earlier than me and drove into Logansport before I got up.  When he got back his first task was to remove the supply and return lines (heater hoses) so he could install shutoff valves.  It turned out that he had the wrong parts and had to go back to Logansport so I rode in with him.  When we got back we finally got to work.  It was chilly but we had another mostly sunny day on tap with light-to-no wind, so working outside was not unpleasant.

Fresh water pump on isolated plywood panel behind Oasis Combi.

Fresh water pump on isolated plywood panel behind Oasis Combi.

Butch got the valves installed and the lines reattached.  He then plumbed in the two fuel lines (supply and return).  Before he turned the unit on I pointed out what I had discovered in the manual last night; that the position of the “summer/winter” loop 3-way valve was the opposite of what we thought it was.  With the valve in the “winter” position, which would allow coolant to flow through the loop with the heat exchangers, he turned on the bypass switch on the Zone Control Board.  The circulation pump came on and the coolant level immediately started to drop in the filler neck, which meant the coolant was being moved into the loop and whatever had blocked this from happening yesterday had cleared up.  He turned the pump off so we could stage one gallon jugs of antifreeze/water mixture to finish filling the system.

Butch suspects there was an ice plug in the domestic hot water heat exchanger which is internal to the Combi box and the first place hot coolant goes before it leaves the unit and travels through the coach.  We also suspect that the use of the 1500 Watt electric heating element last night melted the ice plug.  At least that’s our best guess as to what the problem was.  The reason we thought this was the cause is that the factory apparently tests the units with water and it is probably impossible to get it all out using compressed air.  That is certainly the case with an Aqua-Hot.

Butch prepared six gallons of antifreeze/water mixture and staged them by the Combi.  With a funnel in the filler neck he turned the bypass switch on again and started adding the coolant mixture as the pump pushed it through the system.  Once the system seemed to be full I went into the house portion of the bus and barely opened the bleeder valve on the bedroom heat exchanger.  I got a three second puff of air and then coolant started to appear so I closed the valve.  I repeated this with the bleeder valve on the front heat exchanger with the same result.  These two valves are the highest points in the loop, so air tends to collect there.  The system essentially had no air in it at this point.

fan-coil heat exchanger

fan-coil heat exchanger

Butch hooked up the two fuel lines (supply and return), turned the power on to the unit, and then turned the burner on using the switch by the bedroom utility closet.  We could hear the pump trying to prime but the burner would not ignite.  The unit “flamed out” and Butch reset it several times to no avail so he turned the burner switch off.  We studied the situation and Butch realized that he had reversed the fuel lines.  He switched them and turned the unit back on.  It fully primed on the second try and ignited!  Finally, we had ignition.

Butch rigged up temporary power to the fans on the two heat exchangers and let them run.  The coach eventually got too warm to work and we had to turn the fans off.  We spent the rest of the day, with help from Fonda, completing other aspects of the system installation.  I removed an old mechanical thermostat from the warehouse and Fonda cleaned up an identical one.  We had a third one (different make) that did not need any work.

We pulled three two-conductor thermostat cables from the Combi across the bay and up through a hole in the floor of the bedroom utility closet and then to the three thermostat locations.  We used colored electrical tape to tag the ends of each cable as we pulled it so we could keep them straight later; yellow for the living area, blue for the bathroom, and red for the bedroom.  I mounted one of the thermostats in the kitchen by the front living area, the second one by the bedroom, and the third one in the bathroom.  I completed the connections in a somewhat unusual way.  The cable had a red wire and a white wire.  The white wire was left intact and provided a path from the thermostat to the Combi for DC negative (ground).  The red wire was cut in the utility closet and used to provide +12VDC to the thermostat.  The red wire in the cable from the closet to the Combi was not used.

The Combi came with pigtail harnesses that plug into keyed sockets on the Zone Control Board (box) and have butt splice connectors already installed on the loose ends of the wires.  I completed the thermostat wiring by connecting the wire for the front thermostat to Zone 1, the bathroom thermostat to Zone 2, and the bedroom thermostat to Zone 3.  Butch had connected a wire to the Zone 4 connector yesterday and planned to leave it and connect it to a switch in the bay for test purposes.

With the thermostats wired in Butch worked on the fan control relays while Fonda and I pulled a four-conductor thermostat cable from the Combi across the bay, up through the floor into the utility closet, and all the way up the center isle of the bus to the dashboard.  When then took the cable back into the bedroom and pulled it from the utility closet through the driver-side chase to the cabinet at the front end of the kitchen counter and then down through the cabinet to the very bottom and out the front facing grill to the front heat exchanger.  We left plenty of cable for hooking up the fan control relay that Butch had mounted on the fan-coil heat exchanger and left an extra coil of cable in the utility closet so I would have enough wire to make connections to the relays for the fans on the rear heat exchanger.

As with the thermostat wiring, I left the green and white wires intact all the way from the front heat exchanger to the Combi.  In the utility closet I removed the jacket from a six inch section and cut the red and blue wires.  The red wire coming up from the Combi was connected to the relay for the bedroom fan and the blue wire coming up from the Combi was connected to the relay for the bathroom fan, both of which draw air through a common radiator.  These colors matched the colors of electrical tape used to identify the corresponding thermostat cables.  I connected a separate white wire from the DC negative terminal on each relay to the DC negative (ground) bar on the 12 VDC distribution panel at the top of the utility closet.  The red and blue wires from the closet to the front heat exchanger were not used.

Adding coolant to the ITR Oasis Combi.

Adding coolant to the ITR Oasis Combi.

I mounted the relays to the outside wall of the closet; bedroom relay to the rear, bathroom relay to the front.  I do things like that when I work on projects like this.  By this time it was dark and Butch had gone inside not feeling completely well.  He was really stressed out yesterday when we were unable to fill the coolant loop and purge it of air and he did not get a good night’s sleep.  Been there, done that, didn’t even get the T-shirt.

It was going on 6 PM and I was done working for the day, the first day since I have been working here that I had finished up that early and the first day that I had not worked on any of my own bus projects.  But that was OK;  Butch and Fonda’s ability to use their bus conversion during the winter with comfort and convenience was directly related to the successful completion of the Oasis Combi installation and it felt good to have it so close to bring done.  I will finish up the little bit that remains to do tomorrow and then install another 120 VAC circuit from the inverter circuit breaker panel to outlets for the bedroom.

I need to mention that Butch has been very pleased with the treatment and communication from International Thermal Research, the manufacturer of the Oasis product line.  He was on the phone with their U.S. sales office yesterday when we ran into difficulty and they transferred him to someone at the factory in British Columbia.  The factory contact sent Butch an e-mail, which gave him an address to reply to, and his personal cell phone number.

Sometime in the late afternoon Bill Tharpe showed up to continue working on Brittiny’s car.  It needs a new intake manifold gasket, which requires the disassembly of the top half of the engine.  Bill really knows his way around cars having worked with Indy and Formula (One?) race car teams over the years.  Around 7 PM we headed into Logansport to have dinner at Pizza Hut.  I had the salad bar and some decent (smooth, mild) decaffeinated coffee.  When we got back to their house Bill got back to work on the engine and I retired to my room for the evening.  Butch and I talked earlier about possibly driving over to the Ft. Wayne Hamvention tomorrow but decided to stay here and continue working on bus projects.

2014/11/16 (N) Death of a Mouse

I was up around 8 AM and had my usual breakfast of homemade granola, some orange juice, and coffee (Teeko’s Seattle Blend).  I still had some of the stolen left, but having had that the last two mornings I felt the need to return to my normal routine.  Right after breakfast I replaced the GFCI outlet in the bathroom.  The old one had tripped a couple of times for no apparent reason and that was just one more thing I did not want to live with.  The old one was feeding two load circuits and had short pigtail wires wire-nutted to the hot and neutral conducts.  GFCI outlets are much bulkier than normal ones so that made for a very crowded box.  The new one had back connectors that allowed two wires to be inserted straight in under one screw and tightened.  That allowed me to do away with the two pigtails and the two wire nuts and make it a bit easier to get the outlet into the box.

By the time I finished installing the GFCI outlet Butch was ready for my assistance.  He finished connecting the fan relays on the front heat exchanger and I finished connecting the fan relays on the rear heat exchanger.   I then tied in the fan relay lines to the appropriate fan control lines coming out of the Oasis Combi Zone Control Board.  With the burner switch turned on I tested each zone by turning its thermostat up until it clicked, causing the burner to ignite, the circulation pump to start, and the fan(s) to come on.  All three zones worked.  Although not as dramatic or emotional as yesterday when got the unit to fill, purge, and ignite, this meant we were done with the Oasis Combi installation (except for some purely cosmetic things that Butch and Fonda may not get to for a while) and that it was fully functional.

Top of the Combi showing summer/winter valve lower right (blue handle).

Top of the Combi showing summer/winter valve lower right (blue handle).

While I was working on the Oasis Combi fan control wires Butch started working on installing a fuel gauge.  The New Jersey Transit MCI MC-9B coaches did not have fuel gauges as they made regular runs of known distances and returned to the same NJT garage every day.  For cross-country RV use, however, a fuel gauge is a very good thing to have.

To install the fuel gauge Butch had to pull the instrument cluster out of the dashboard.  These things are rarely designed/built for easy servicing, and this was no exception, but he got it out.  He had installed the sending unit in the fuel tank a long time ago but never hooked it up.  He managed to run a fishtape up from the driver-side front bay into the area behind the dashboard.  He attached a wire to it and fed the wire in as I pulled the fishtape out.  We then used the fishtape to feed the wire from the driver’s side of the generator bay to the passenger side.  From there the wire had to go through the chassis battery bay to get to the sending unit on the fuel tank.  After drilling a hole in one panel and drilling out two rivets holding an unused fuse holder to another panel we finally had a route for the wire.

There was a blank spot on the instrument cluster where the fuel gauge would have been so that is where Butch installed it.  It took us a while to decode the 24 VDC dashboard wiring diagram but we eventually figured out that there was an unused screw terminal on the load side of the Master Switch just below the fuel gauge that would very conveniently provide the +24 VDC for the gauge.  I made that connection and then Butch connected the instrument, remembering to pass the wires through the dashboard hole first.  In addition to the +24VDC, signal, and ground for the gauge he had to tap into the 24 VDC instrument lighting circuit to power the instrument light and provide a ground connection for that as well.  With everything hooked up Butch turned on the Master Switch and the fuel gauge indicated just below a full tank, which is what he expected.  These kinds of “little” projects sound relatively simply, but they always seem to take a half a day to a full day to do, even with two people working on them.

At this point it was about 2 PM so I took a quick lunch break and had a tofu hotdog with mustard, relish, and onions.  We had hints of snow flurries during the morning that became more persistent after noon.  I was thinking about installing the new Shurflo Everpure ADC water filter cartridge under the kitchen sink and opened the cabinet door to have a look at what was involved.  (Actually, I knew what was involved having done this before.)  This filter cartridge should be the easiest thing in the world to remove and install but that has not been my experience.  The location of the filter head doesn’t make it any easier.  Anyway, I turned on the light and noticed a waded up paper towel in the trash can.  I had not been using this trash can since I realized that the resident mouse had easy access to the area under the sink and regarded the waste basket as a buffet.  I figured I had thrown this used paper towel in there by mistake out of force of habit as I catch myself several times a day starting to do that.  I moved the can and reached in to get the paper towel and that’s when I noticed the dead field mouse in the corner of the trash can.

The mouse was a tiny creature, gray on top and white on the bottom.  I surmised that it had returned to this cabinet looking for the food it had found there on previous occasions, climbed up a carpeted wall or electrical cable, perhaps walked across a drain pipe and, seeing the paper towel moved to the rim of the trash can (the only place I ever actually saw it alive) and either jumped or fell in.  Unfortunately (for the mouse) the trash can did not have a plastic liner bag and so it had no way to escape.  I presume it died of thirst and/or lack of food.  It was not my intention to use the trash can as a trap.  In fact, I had purchased a live trap a few days ago but not yet set it.  My plan was to trap it, unharmed, and release it a couple of miles away near a creek so it had access to water.  Instead, I added it to my real trash bag, tied up the bag, and put it in the dumpster.  Although I was glad to no longer have it roaming around inside the coach, I was saddened to find it dead and to think that it had died this way.  I have no way of knowing, of course, if this was the only mouse in the coach so I will continue to be on the lookout for telltale signs of the presence of mice.

I returned to working on Butch and Fonda’s bus.  While they dressed up some coolant lines and tightened up some fittings on the Oasis I installed four surface mount duplex electrical outlets in the bedroom, two on the back wall above a narrow shelf at the head of the bed, one in the driver side chase at the midpoint, and one at the front end of the chase inside the utility closet.  I turned off the power to the inverter panel, removed the cover, and routed the cable down into the box.  Butch discovered that he did not have any more 20A circuit breakers so I connected the ground and neutral and left the load wire until we had an appropriate breaker.  We were done working in/on their bus for the night, so I left the cover off of the inverter panel and turned the power back on so they would have lights in the front part of the bus

Fused DC distribution house panel in MC-9 bedroom utility closet.

Fused DC distribution house panel in MC-9 bedroom utility closet.

Throughout the day Butch had been adding to a list of things he needed and at this point the list was long enough, or the items critical enough, that we made a run to town.  By this time it had been snowing for a few hours and it was accumulating on grassy areas and making the roads slick.  Unfortunately the Logansport Home Depot closed at 7 PM on Sunday evenings and we got there at 7:05 PM, having stopped first to fuel up the Suburban.  No problem, we just drove down the street to Rural King which was open until 9 PM and has free popcorn.  Bonus!  Butch found most of what he needed there.  My shopping list was short and easily filled at Walmart where Butch picked up a few other things on his list.

When we got back I made a tofu “turkey” sandwich with vegan mayonnaise, sliced onions, and power greens and got out some of the seedless black grapes.  As I was finishing the preparations Fonda came to the bus to let me know that Linda was on the phone.  I brought everything into the house and chatted with her for a little while.  We then sat down and ate dinner.  After dinner I used Butch’s chop saw to cut my oak center pillar mounting board to length and then set it up on a table in the parts room so I could stain it.  Fonda got the stain, a shallow wide mouth can, a disposable foam brush, a rag, and a pair of disposable gloves for me to use.  I was not very happy with the results, but I will see how it looks in the morning.  I suspect I will end up painting it flat black.  I would really like to get it mounted to the center windshield pillar before I wrap up working on my bus this Wednesday but, given the other things I need to do, it’s going to be close. 

 

2014/11/03-09 A Week at Home

Note:  There are no photographs for this consolidated post.  Sorry.  🙁

2014/11/03 (M) Getting Ready

Linda was up early and off to the bakery.  I got up an hour later and had some raisin toast for breakfast.  Whenever I have had time since I got home on Friday I have been working on the project list for our bus.  I worked on it some more this morning but eventually had to set it aside while I made some phone calls, tried to deal with an issue with Linda’s Samsung laptop computer, and got documents ready to upload to my Dropbox for a meeting on Wednesday afternoon.

I called Bill Jensen, the national service advisor for conversion shells at Prevost Car Inc., but his voice message said he was unavailable indefinitely and gave alternate contact info.  The main contact was Kevin Laughlin so I called him.  I described the shorter ride height linkage and the downward pointing position of the ride height valve lever arm in its neutral position.  He agreed that neither of these seemed right.

I called Prevost and ordered a new ride height valve and two CX-96 (Gates) drive belts for the OTR air-conditioning compressor.  I then called Martin Diesel in Defiance, Ohio and made an appointment to have the diesel generator in our coach serviced on the 20th and 21st if needed.  I also needed to call Webasto technical support but did not get that call made today; maybe on Wednesday (or Thursday).

Linda’s Samsung laptop suddenly decided to turn the screen brightness down and she has not been able to turn it back up.  It’s bright enough to see in somewhat dim conditions, but still uncomfortably dim for general office use.  I did a Google search and found that lots of other folks had encountered the same problem and had advice on how to fix it.  I shared several links with Linda but she could not get it to work.

I put the finishing touches on the FMCA Freethinkers Associate Chapter’s financial statements, roster, and minutes of last year’s’ meeting.  I uploaded them to Dropbox and e-mailed the chapter members that the materials where there.

Linda got home later than usual from the bakery so we decided to go to La Marsa in Brighton for dinner.  It’s our favorite local restaurant but was more crowded than on a regular Monday due to the buffet they have the first Monday of each month and we had to wait about 20 minutes for a table.  We ordered the almond garlic Ghallaba from the menu, one of our two favorite vegan dishes, but it was not as good as usual.  Not bad just somewhat flat, as if they had left out the garlic.  It was 8:30 PM by the time we got home and we turned in for the night fairly quickly.

2014/11/04 (T) Election Day

Linda did not go into the bakery today.  We spent much of the day together and this is what we did:

  • Had raisin toast for breakfast with Orange juice and banana…
  • ..
  • Got passport photos at Rite-Aid in Brighton…
  • Went to Panera for coffee…
  • Drove to Dearborn for dental hygienist appointments…
  • Drove back to Farmington Hills where we went to McDonald’s and had French fries for lunch…
  • Drove a mile to the Henry Ford Health System Columbus Center in Novi for flu shots…
  • Drove back home where we had a few chips and hummus for an afternoon snack…

I drove to Brighton Honda for a 3:30 PM appointment to have the Element’s recalled air bag serviced.  The appointment took 45 minutes by which time the traffic was really bad.  Because of the combination of rush hour traffic and the ongoing re-paving of Grand River Avenue just west of the dealership a left turn was going to be near impossible.  I needed to get to Latson Road and Grand River Avenue so I made the easy right (and correct) turn out of the dealership and quickly got on I-96 westbound.  I took the relatively new Latson Road exit and stopped at Walmart to stock up on ICE brand water.  I went to Meijer’s for a Mega-Millions lottery ticket and then to O’Reilly’s Auto Parts for two more 12VDC duplex power outlets.  It was still raining lightly, as it had been for most of the day, so I returned home by way of Grand River Avenue and Hacker Road which kept me on pavement for most of the trip.

Linda heated up the leftover chili for dinner.  She continued to try different things to get her Samsung laptop to allow her to adjust the screen brightness and return it to normal but nothing worked.  I took a little time to update WordPress websites and tweak the Wordfence login security.  We then filled out and printed our passport renewal applications and got them ready to mail.  We also figured out how to create, share, and synchronize multiple calendars on multiple devices so that we can now see the same information on our laptops, tablets, and smartphones.  It’s all about Google.

Linda was tired and needed to get up early but something had broken on our bed foundation and needed to be fixed, if only temporarily.  We are still using the plastic foundation that came with our select comfort air mattress years ago and one of the cross members that carry the load to the side rails had come loose from the interlocking top platform and dropped down.  We had to get the mattress off the bed to work on the platform.  We got it put back together for now, but we need to get a box spring or other foundation to replace it.  That probably won’t happen until spring.

2014/11/05 (W) The Day After

Yesterday’s election results were generally as predicted, so nothing to cheer about from our point of view, but the world did not come to an end either.  Elections change very little in the short-term and the daily tasks of living continue regardless of who does or does not get elected.  We were happy, of course, that Gary Peters won the U. S. Senate seat and that Debbie Dingle was elected to the U. S. House of Representatives.  We were especially pleased that our friend, Brian Robb, won re-election to the Ypsilanti City Council and that Richard Bernstein was elected to the Michigan Supreme Court, but saddened to learn that Casandra Ulbrich failed in her attempt to get re-elected to the State Board of Education.  And so it goes with American politics.

Linda was back at the bakery today reviewing the period accounting and continuing to answer questions and monitor the use of the new software.  I took care of some e-mails and then headed to the Brighton post office to mail our passport renewals.  I refueled my car at Meijer’s for $2.899/gal and then stopped at Bed, Bath, and Beyond to exchange two Sodastream CO2 cartridges.  BB&B is in the same strip mall as the Panera, so I stopped in for some coffee.

When I got home UPS had already delivered my package from Prevost.  I took the trash can to the street first and then I opened the box and verified the contents.  I installed one of the Sodastream cartridges but the display would not reset.  The unit has an LCD display so I figured it had a battery hidden somewhere.  I released a clip at the top of the display and the whole display module came out with the nickel-sized battery was installed on the back side.  I started to remove it and the display changed, so I figured it needed a new battery.  I did not think we had any of this type of battery in the house but Linda told me later that we did.

I had not backed up all of my photo files from last week so I spent some time in the early afternoon copying files from my camera to my laptop and then from my laptop to both of our NAS units.  I printed off all of the documents I needed for the FMCA Freethinkers Associate Chapter annual meeting and was responding to an e-mail when Tony and Mark from GSI showed up to install the new natural gas fireplace logs and hookup the new natural gas outdoor grill.

Tony and his wife own GSI but he had Mark install the fireplace while he worked on the grill.  He installed the new disconnect but when leak testing discovered that there was a small leak on the output side of the shutoff valve.  I had to shut off the gas supply to that branch circuit, which also supplies gas to the kitchen range and the fireplace, so he could work on it.  Tony removed the new disconnect, installed a new valve, and reinstalled the disconnect.  I turned the gas supply on and he retested for leaks but did not find any.  He suggested that we run it for a while to burn off manufacturing oils and other things that initially produce odors and can affect the taste of foods cooked in the unit.  I got the stainless steel heat diffuser and two cast iron grills and set them in place.  The left burner lit easily using the battery powered piezoelectric igniter and the right grill lit easily from the left one.

Linda got home at 3:30 PM while Tony and Mark were still working and took over interacting with them while I got ready for our 4 PM telephone meeting.  She got instructions on how to light/operate both appliances, paid them, and then joined me for the meeting.  By 4:05 PM we had 14 “F” numbers represented, safely exceeding our quorum requirement of 10, and Bob Pelc called the meeting to order.  The meeting was friendly but efficient.  We conducted all of the necessary annual chapter business and adjourned at 4:42 PM.  I was re-elected to another 2-year term as chapter secretary but did not run for chapter vice-president, the position I have held since the chapter was formed in June 2010.

After the meeting Linda shut off the outdoor grill and we sat in the living room monitoring our fireplace logs and discussing dinner options.  As a result Linda decided to make waffles.  She tried a different recipe and substituted pastry flour instead for regular flour.  Neither of us understand the difference, at a food chemistry level, but she apparently invented/discovered something that will stick to Teflon-coated cookware; really, really tightly. The waffles were crispy and tasted fine, once we got them out of the waffle iron, but they would not have won any prizes for presentation.

We spent a couple more hours after dinner sitting in the living room letting the firelogs operate with the flue opened a bit.  Tony and Mark said it can take up to 20 hours of use for the unit to stop producing odors and suggested that we operate it with the flue slightly open while breaking it in.  The logs are a non-vented design, just like a kitchen range, which means they are designed to operate without being vented to the outside yet not produce harmful combustion by-products such as carbon monoxide.  At 8:50 PM I turned the logs down to their lowest setting.  Linda shut the unit off at 9:15 PM (it has an On/Off/Remote switch but we do not have a remote).  The pilot light does not consume enough air or produce enough heat and combustion by-products to be a safety or economic concern, so I left it on, closed the flue, and went to bed.

2014/11/06 (R) Inductive Thinking

Linda left the house before I awoke and spent a long day at the bakery.  I spent most of the day at the dining room table working at my computer.  I typed up the draft minutes from yesterday’s FMCA Freethinkers annual meeting, generated PDFs of the chapter’s financial reports, uploaded files to the Dropbox folder, and reorganized it.

I took a break at noon and drove into Novi to have a look at Chuck’s latest bus projects and then go to lunch at the local Leo’s Coney Island.  The new wedge cabinet and Corian top look and fit great between the end of the new couch and the kitchen base cabinet.  He did a nice job replacing the outside Jenn Air electric cooktop/grill, which was mounted in a pull-out tray in one of the bays, with two Indufix 2-hob induction cooktops.  The tray has an open bottom and is supported by four heavy duty extension slides, two on each side.  The induction units are from Germany and came with European “208VAC” plugs.  They are strictly 208/240 VAC devices and do not have a neutral connection.  The wire colors are also different with brown and blue for the L1 and L2 (hot, load) and yellow/green for the ground.  Chuck had an addendum sheet explaining the color codes and how to match them up to the U. S. standard.

For lunch I had a small Greek salad without feta cheese and an order of French fries.  Chuck had a more substantial meal with a salad, chicken on skewers, and rice.  I was back home by 3:00 PM and settled back into my computer-based work.

Linda got home around 6:15 PM and made barbecued tofu sandwiches with grilled onions and corn on the cob.  We washed it down with Leelanau Cellars sweet Red Table Wine.  It was labeled semi-sweet but it reminded me of the King of the North wine from Red Trail Vineyards in North Dakota which had a distinctly grape juice taste.  I liked it and Linda said she did too, which surprised me a little, as she tends to like dryer red wines.

After dinner Linda read and played online word games on her iPad to the warm glow of our new natural gas fireplace logs.  These logs are a high-efficiency, unvented design and actually through heat into the living room rather than up the chimney.  I continued reformatting the Freethinkers chapter roster, uploaded it to my Dropbox, and e-mailed the members to let them know it was available and ask them to review their listing and get back to me with corrections.  RVillage had notified me that someone wanted to join both the CCO and GLCC groups so I logged in and approved those.

I discovered the other day that Wordfence will allow me to block individual IP addresses so I would like to find the time to go back through the “User Locked Out” notification e-mails and enter some of the most egregious repeat offenders.  But not tonight.  It’s late, Linda is already asleep, and I’m tired.

2014/11/07 (F) 50% plus

My objectives for today were the following:

  • Finish up yesterday’s blog post and start working on today’s…
  • Read a few of the blogs I follow in Feedly (I am way behind)…
  • Move the spare Aqua-Hot from the garage to the library…
  • Move any other freeze sensitive items from the garage to the library…
  • Finish the drywall compound work in the library…
  • Call Webasto technical support…
  • Measure the inside of the Honda Element…
  • Buy plywood to build the storage divider for the Element…
  • Start building the storage divider for the Honda Element…
  • Use the blower to clear the leaves from the deck and planting beds….
  • Prepare the FMCA Freethinker annual chapter certification paperwork…
  • Select a few photos to go with blog posts going back to early October…
  • Start uploading blog posts to our website…

That was obviously more than I could possibly accomplish in one day, but it helps to write it down.  Here is how I did…

  • Finish up yesterday’s blog post and start working on today’s…check.
  • Read a few of the blogs I follow in Feedly (I am way behind)…check.
  • Move the spare Aqua-Hot from the garage to the library…check.
  • Move any other freeze sensitive items from the garage to the library…some.
  • Finish the drywall compound work in the library…check.
  • Make an unplanned trip to Lowe’s and Sherwin Williams for paint supplies…Yes.
  • Prime the areas in the library where the drywall work was done…Yes!
  • Call Webasto technical support…check.
  • Measure the inside of the Honda Element…check.
  • Buy plywood to build the storage divider for the Element…no.
  • Start building the storage divider for the Honda Element…no.
  • Use the blower to clear the leaves from the deck and planting beds….no.
  • Prepare the FMCA Freethinker annual chapter certification paperwork…no.
  • Select a few photos to go with blog posts going back to early October…no.
  • Start uploading blog posts to our website…no.

That’s 6-1/2 + 2 out of 13 + 2 or 8-1/2 out of 15 which is over 50%; not bad.  I might have gotten one or two other things done, or at least started, but we ended up meeting Chuck at BD’s Mongolian Bar-B-Que in Novi for dinner at 7:00 PM.  Barbara was still attending to out-of-town family business and Chuck appreciated not dining alone.  We were at the restaurant for over two hours and had a nice meal and great conversation in spite the very loud, upbeat youthful vibe of the place.  Next time we will try Sizzling Sticks in Northville; same kind of food but a much more subdued atmosphere according to Chuck.  Overall it was another good day.

2014/11/08 (S) Steve and Karen

We had a good sized crowd at the ham radio breakfast this morning.  We did not have to be anywhere at any particular time, and we were enjoying the conversation, so we stayed a little longer than usual.  Once we got back to the house I changed into work clothes for drywall and painting while Linda gathered up the recyclables and finished her grocery list.  She left to run the errands and I got the painting tools/supplies out.

Linda dropped off the recyclables, stopped at the bank, stopped at Lowe’s to return something that it turned out we had not purchased there, and then did the grocery shopping at Meijer’s.  While she was gone I put a first coat of paint on the areas of the west wall of the library where I had repaired the drywall.  The item she planned to return was a can of Great Stuff Fire Block that broke yesterday when I tried to use it.  It turned out that I had not purchased it at Lowe’s as they do not sell it.  They sell a 3M product for the same application, which I had sitting in the garage but had overlooked.  I used it to try to fill gaps around the gas supply pipe and the condensate drain, which were open clear through to the outside, and the double-walled flue pipe and gas pipe that pass through the furnace closet wall.  I applied the foam from inside the furnace closet and will need another can to finish the job from the outside of the closet.

Linda started putting together supper while I gathered up laundry and started a load.  I spent some quiet time with Jasper, our very sweet 10-year old cat, and then settled in to write and read for a while.

Steve and Karen arrived at 5 PM and we visited while Linda put the finishing touches on dinner.  She made the warm Farro dish with kale, dried cranberries, almonds, garlic, and onions and roasted asparagus as a side.  She has the Farro dish tagged “good for company.”  We still have a few bottles of the 2009 Egri Merlot and the slightly sweet full body of this wine went very nicely with the earthy Farro.  She made a chocolate cake for dessert with raspberry sauce made from fresh raspberries.  I think the cake was her best yet; very moist with just the right texture.  Vegan baking is tricky and Linda is still figuring it out.  Sometimes the cakes are a bit dry and other times they lean towards being brownies but tonight she got it just right.

Steve brought his Raspberry Pi single board computer (SBC) and an SD card with photos of their recent (September) trip out west.  He connected the Pi to our TV/monitor in the basement so we could all comfortably see the photos.  They had excellent weather and some fall colors the days they were in Yellowstone National Park and got some nice images.  But we spent most the evening sitting in the living room enjoying the new natural gas firelogs and catching up on what we had been doing since we last saw each other.  They left around 10:30 PM and we had everything picked up by 11 PM and headed off to bed.

2014/11/09 (N) Wrapping Up

Today was mostly about wrapping up the library drywall/painting project and other minor chores, doing laundry, and getting me packed for a two week return visit to Twelve Mile, Indiana to work on our bus and help Butch and Fonda work on theirs.

Linda made blueberry pancakes for breakfast, which is always a treat.  I made a trip to Lowe’s for a nine inch disposable paint roller cover and another can of 3M Fireblock spray foam.  I used the can of spray foam to finish sealing the gaps in the utility closet wall openings where the black iron gas pipe and the double-wall flu pass into the garage.  I only needed a little more foam to finish the utility closet openings so I used the rest of the can to fill gaps around the rear entrance door in the garage.

I used some scrap packing paper from recent Prevost shipments and some frog tape to mask the opening for the library furnace return air grille.  I then used flat black spray paint to make everything that is visible through the slots in the cover disappear.  Finally, it was time to paint walls.

I used a small brush to cut in the adjacent wall and ceiling with the Sherwin-Williams Extra White satin finish paint.  I removed the cover plates from two outlets and a switch and then rolled on a new/final coat of paint.  I cleaned up my paint supplies and then we brought the outdoor grill (and cover) into the garage to store for the winter.  We also brought the patio table umbrella and base into the library and set the umbrella in the base for the winter rather than let in lie on the floor.

Linda made another batch of granola while I checked stuff on my computer and took care of laundry and packing.  We had leftovers for dinner at 5:15 PM and then headed to South Lyon for the monthly SLAARC (ham radio) meeting where I was re-elected as VP for a second year and Linda was elected Treasurer for the coming year.  The program was a presentation on Software Defined Radios (SDR) by Mike Alexander (N8MSA).  When we got home we finished the chocolate cake and raspberry sauce with a glass of Leelanau Cellars Autumn Red wine and then turned in for the night.

 

20141030-1102 Fixing Buses in Indiana

2014/10/30 (R) To Kokomo We Go

Well…sort of.  Our actual destination was Maple Grove Distributors in Galveston, Indiana, which was in the general direction of Kokomo, but not as far.  (It’s pronounced “gal VES ten” with the emphasis on the second syllable.)  The tie rod ball ends that Butch ordered had finally come in and he wanted to get them early this morning so that: 1) We could get back and take advantage of a relatively nice late October day, and 2) He would have them for tomorrow when the weather is forecast to be lousy and thus a good day for inside work such as fabricating ride height linkages.

PS rear corner bedroom cabinet with slot in door for TV/monitor wires.

PS rear corner bedroom cabinet with slot in door for TV/monitor wires.

In spite of the nice weather I spent most of the day working inside my bus, stopping occasionally to help Butch with something.  I don’t have a lot of outside projects at the moment, or at least none that I felt like working on, and I really wanted to get the bedroom TV cabinet taken care of.  As with the front TV cabinet that I worked on for the last couple of days, the bedroom cabinet once housed a 19″ CRT TV set and a VHS tape deck.  I removed those in late 2011 while the bus was at Phoenix Paint and had Jaral Beaty make doors to cover the openings.  Once those doors were installed, I mounted 22″ diagonal, 16:9 aspect ratio, LCD/LED flat panel TV/monitors on each door. The power and signal connections, however, were inside the cabinets, so for the last couple of years the cables have come out of the bottom/rear of the TVs and under the bottom edge of the doors and into the cabinets.  This arrangement prevented the doors from being closed, even though they had spring loaded ball catches, so we have held them closed with a couple of pieces of bright green Frog Tape.  The tape is sticky enough to hold the door closed but does not seem to leave any reside even after being in place for a while.

The wires from the TV/monitor pass through the slot in the door so the dorr can be closed and latched.

The wires from the TV/monitor pass through the slot in the door so the dorr can be closed and latched.

As with the front TV cabinet door, I created a horizontal slot behind the TV, positioned to allow the cables to come down out of the back of the TV and bend gently through to the inside of the cabinet.  I removed some unneeded cable and coiled up other cables and secured them with zip ties that have a mounting tab with a hole for a screw.

My two outside projects were brief.  I got back under the front of the bus between the front tires and unbolted the ride height linkage.  It unbolted from the ride height valve lever arm easily but not from the axle bracket.  Fonda got a can of Cyclo Breakaway and some paper towels for me, but even after spraying the nut and letting it sit it would not come loose.  I am not the strongest guy in the bus yard so I put some more muscle into it and broke the bolt off with the nut still stuck tight to it.  The other half of the bolt then slide out easily.

As long as I had my wrenches out I slide under the rear end of the bus to see if I could free a couple of wires for the auxiliary braking system that were pinched under a mounting pad for the rear bumper fascia.  The stud had a Nylok nut on it that was barely threaded onto the stud.  The reason, I guessed, was the stud was at an angle that made it difficult to get a socket and ratchet on it.  I was able to loosen/tighten it using a universal (swivel) adapter between the socket and the ratchet.  While I was under there I noticed a second stud with a barely threaded Nylok so I tightened it as well.  One of the things you have to watch out for on a used RV is all the work that other people have done ‘just well enough’ to get it ‘out the door’ without something falling off in the parking lot.  These are always things that are hidden and relatively inaccessible, which is why they were not done correctly or completely in the first place, but the assumption is you will never see them.

My other inside project was to separate the load wires for the lighted entrance handle and the patio light and put them on separate switches.  It turned out that the front most switch just inside the entrance door (next to the passenger seat) was supplying 12VDC power to three circuits, the two just mentioned and a third one that, as of this writing, is still a mystery in that I was unable to determine anything that was being controlled by those wires.  The first (front) switch now controls only the lighted entrance handle, the second (middle) switch controls only the patio light, and the third (rear) switch controls…well, I don’t know what it controls but it definitely puts 12VDC power onto a wire that goes somewhere.

I assisted Butch briefly in locating their front fan-coil heat exchanger relative to the bay where the coolant lines will go.  Later in the day I helped him position the front suspension of their coach to the MCI specified spacing for the air springs so he can fabricate the ride height linkage to the correct length.

I needed a few parts for projects I might want to work on tomorrow so I left at 7 PM and drove to the Home Depot in Logansport.  That also gave me a chance to call Linda and chat about cell phone data plans.  I got back to Twelve Mile at 8:30 PM.  Butch and Fonda were already having their dinner so I went to my bus and made a salad.  After I cleaned up the day’s food utensils I installed the 6-outlet surge protected adapter in the AC duplex outlet in the bedroom TV cabinet.  That completed my work for the day and I returned to the house, visited briefly, and retired to my room to check e-mail, offload photo files from my camera, and write this post.

2014/10/31 (F) Boo! Snow (Boo)

After a relatively mild October the weather decided to turn more seasonable just in time for Halloween.  I was originally going to title this post “Foot Pounds and Gigabytes” but decided to acknowledge All Hallows’ Eve instead, along with the dramatic change in the weather.

A couple of days ago I bought a torque wrench from Butch that is adjustable up to 600 foot pounds, which is the kind of torque needed to tighten and loosen the lug nuts on our bus wheels.  It’s a very big torque wrench; over three feet long.  I need to buy a compatible socket to go with it.  Today was also the last day for the Verizon and AT&T double your data plan promotions, so I planned my day to put me in Elkhart, Indiana while one of the corporate stores was still open.

I got up around 8 AM and spent 45 minutes doing some preliminary packing after which I went out to my coach and had breakfast.  We had snow flurries around 9 AM this morning and did not work outside today save the few minutes I spent adjusting the air pressure in the tires of my Honda Element.  Today was mostly about shopping.

I got a cup of coffee from Small Town Brew and then we headed to Logansport where we did most of our usual circuit:  NAPA Auto Parts, O’Reilly’s Auto Parts, Rural King, Aldi’s, and Walmart.  (The only regular place we did not go was Home Depot.)  My only purchase was a 12VDC dual outlet with a mounting flange that I found at O’Reilly’s.  I plan to use it to create power connections for the GPS and TPMS receiver.  (I realized later that I should have bought three of them as I also need to supply power to the DVD camera/recorder up front and the TPMS repeater which I plan to mount in the rear TV cabinet.)

We got back around noon and I spent the next couple of hours straightening up the inside of the bus and packing everything that was going home with me.  Around 2:45 PM I finished packing the stuff I had in the guest bedroom and began loading the car.  I wrote up a list of things we owed each other money for and, as I expected, I owed Butch more than he owed me.  (He tends to order things we need on his accounts and I pay him back.)  I bought a Variac from him, added it to the list, and put it in the car.  Fonda has been working on a wedding dress for their daughter Gene for quite some time and was done except for some trim, so I got to see it before I left, which I did at 3:15 PM.  It was very nice.

I had located a Verizon corporate store on US-33 just south of US-20 which was on my normal route home.  I arrived at that intersection around 4:45 PM and first stopped at the Burger King next door for some French Fries.  The Verizon sales associate, Hector, claimed to know nothing about the double data promotion and insisted there was no such thing available.  I called Linda from their parking lot and we discussed what to do as today was the last day for the promotion.  She had checked our account online last night, and although we could change our monthly data allowance online (for a price, of course) there was no information about the promotion available there either.  Very strange considering how much this has been in the media all month.

Linda was stuck in traffic coming home from the bakery so we chatted while I made my way over US-20 to CR-17 (IN) to I-80/90 (Indiana Tollroad) to the I-69 exit where I had to pay my toll.  Traffic on her end had also loosened up by then so we ended our call.

My entire trip home was in some form of precipitation; mostly rain but occasionally sleet or snow, with very strong and gusty winds from the north that made for somewhat more difficult driving.  It also made it difficult to judge the effect of the adjusted tire pressures on handling although the shimmy seemed to be gone.  I stopped at the Michigan Welcome Center on I-69 and unpacked some of the food I had with me.  I stopped again at M-60 for coffee at McDonald’s and fuel at the TA/Shell station where Regular gasoline was $2.929.  It’s been a long time since we have seen gasoline prices below $3/gallon.  That was my last stop before arriving home at 8:45 PM.  The last few miles were through moderate snow and the strong winds had coated the north facing side of trees and road signs.

Linda helped me unload the car and get everything into the house.  I gave Butch a call to let him know I had arrived home safely and we chatted briefly about bus projects.  I took a shower and went to bed where I finished this post before 11 PM and went to sleep.

2024/11/01 (S) Words

Although we were both very tired we did not sleep well last night.  We awoke early to find a thin covering of snow on our rear deck and over parts of our yard with the temperature in the upper 20s.  We went to our SLAARC ham radio club breakfast this morning anyway, the first time in several weeks for Linda, and there was a good turnout.  Those members who came from east or south of us did not have snow on the ground.

When we got back to our house Linda worked at her desk on our personal finances while I worked at the dining room table on e-mail, websites, and bus project documentation.  Our son and daughter-in-law showed up around 3:30 PM with their daughter.  They had a baby shower to attend in Detroit and Madeline was spending the night with us.

Linda had given me the heads up that Madeline’s vocabulary had increased significantly since I last saw her and that certainly proved to be the case.  She finally had understandable words for many things including the counting words from one to ten.  She is now 22-1/2 months old and is a very active and busy little girl.  We played with lots of different toys, including a new little Thomas The Train locomotive that Grandma Linda bought for her.

We had dinner between 6 and 6:30 PM.  Madeline had mock chicken tenders with broccoli, cauliflower, mandarin orange segments and sliced strawberries.  Linda and I had yummy homemade chili that she had been cooking in the crockpot most of the day.  I played with Madeline after dinner while Linda cleaned up the dishes and then joined the fun.  Nighty-night is her current pre-bedtime game, but by 7:15 PM she was tired enough let Linda get her into her pajamas and then sit quietly while I read a couple of story books to her.  As always, she went to bed without a fuss.

Once Madeline was asleep Linda read and played online word games with friends and relatives and I continued working on my bus projects list, light bulb inventory, and reconciliation of purchases that Butch and I have made for each other.  By 10:45 PM I was tired and ready to do something else so I climbed in bed and worked on this post.

2014/11/02 (N) An Extra Hour

At 2 AM EDT this morning it was suddenly 1 AM EST so when Linda got Madeline out of her porta-crib at 8 AM, according to the clocks in our house, it was officially 7 AM.  We all slept well last night and Madeline woke up well rested and in a pleasant mood.  She enjoys her meals so before any playtime we had breakfast of toast and juice and fresh fruit.  Brendan called around 9 AM to see if we could keep her until after her afternoon nap as he and Shawna had professional work they needed to concentrate on.  I suggested they come for an early dinner and they agreed.  Linda checked her ingredients on hand and then agreed to make her seitan stroganoff served over rice.  This is one of my favorite vegan dishes and a standard ‘go to’ when we are having non-vegan company for dinner.

You cannot have too many bows in your hair, apparently.

You cannot have too many bows in your hair, apparently.

We played with Madeline all morning and she was a very busy girl.  She has understandable words for a few things and a much richer, if somewhat secret, vocabulary that she takes great delight in using.  She knows the names of her basic colors and has started to get the idea of counting.  She enjoys building tall structures with her Lego blocks and is still fascinated with the organ.  Running around the island in our kitchen is another favorite activity; sometimes chasing, sometimes being chased, and sometimes holding someone’s finger.

I got a TXT message from Chuck asking if I was back in town and had time to talk.  Linda let me take a break from playing with Madeline so I could call him back.  He has been working on their bus and wanted to bring me up to date on his projects and get caught up on my projects and timeline.

Our other grand-daughter, Katie, is up in the U. P. with Chris (her dad) and Meghan (our daughter) visiting Northern Michigan University in Marquette.  They visited the Pictured Rocks National Lakeshore yesterday and made it out to Castle Rock.  This evening they had a banquet to attend and tomorrow she has an interview for a scholarship.  Katie is interested in animals and wants to study zoology.  NMU is one of the few universities that offer a true zoology major rather than a biology major with an emphasis in zoology.  It may sound like a distinction without a difference, but it is an important distinction to Katie.  Katie is a serious young lady who has done well in school and will certainly represent herself as such during the interview.  We are excited for her and hope she is successful in obtaining this merit-based financial support.

By 11:30 AM we were anticipating lunch and Madeline requested pizza.  We happened to have an Amy’s Roasted Vegetable pizza in the freezer (our favorite) so Linda preheated the oven and baked it on our pizza stone.  We sat down at noon and enjoyed our pizza accompanied by seedless red grapes.  We were all full by 12:30 and Madeline was showing signs of being ready for her nap so Linda helped her wash her hands and face and then got her settled in her porta-crib.  Madeline enjoys sleeping almost as much as eating and went to bed without any fuss.

The cats, who had retreated to the basement this morning as soon as they heard/saw Madeline, are keenly aware of when she is eating and sleeping.  Once we have her in her high chair at the table we usually open the safety gate at the top of the basement stairs so they can come up.  Both of them did and walked around under the dining room table, apparently aware that she was not mobile.  They eventually went back downstairs but came back up once she was asleep.  We decided to leave the door to the middle/blue bedroom open about six inches to see what the cats might do.  Jasper immediately turned around and went back downstairs but Juniper stuck her head in the room, probably got sensory overload, and also left.

Linda needed a few grocery items and went to Meijer’s in Brighton where she topped up her gas tank for $2.919 a gallon.  If only the price of diesel fuel would pull back to corresponding levels.  It has dropped but not by the same amount.  I stayed home and worked on my bus projects spreadsheet.  When Linda got back with batteries I changed all of the clock batteries and reset the time.

Brendan and Shawna arrived at 3 PM just as Madeline was waking up from her nap.  She was thrilled to see her parents, of course, as they were thrilled to see her.  It was a beautiful, if somewhat chilly, day and they got her coat, hat, and mittens on and played in the yard while Linda started preparing dinner while I cleared the table of my computer and papers and set it for the meal.  We sat down to eat at 4:15 PM and started with a nice salad of chopped greens and cabbage, an Asian dressing, and crispy Asian noodles.  The main course was the seitan stroganoff served over white rice and accompanied by roasted Brussels sprouts and a sliced multi-grain baguette.  The adults had a small glass of the Leelanau Cellars Witch’s Brew, a seasonal mulled (spiced) red wine.

After dinner Brendan and Shawna began the process of getting ready to leave which includes delay tactics on Madeline’s part and their response to them which is always gentle but persistent.  They were out the door at 5:30 PM and by 6 PM we had cleared the table, rinsed the dishes, loaded the dishwasher, and picked up the few toys that were left out in the living room.  Although the clock said 6 it felt like 7.  As hard and as long as I have been working on bus projects, I am surprisingly tired after spending a whole day with Madeline.  I opened the safety gate and Jasper came upstairs right away, eager for our company and attention.  He curled up in my lap while I worked on this post.

We watched Inspector Lewis (streamed), the first TV program I have watched in quite some time.  Part of the PBS Masterpiece Mystery series, it is a really excellent production.  I did some online research on 2m/70cm ham radio antennas and dual (co-phased) CB antennas but did not come to any conclusions about what to get.  The problem remains the same; I cannot put anything tall on the roof of the bus and even if I wanted to I have little-to-no access to the underside of most of the roof.  The fact that the lower roof sections in the front and rear are part of the front and rear fiberglass caps just complicates matters even more as they do not provide a conductive path or ground plane.

 

2014/10/23-29 The Bus Work Continues

2014/10/23 (R) Close Encounter of the 1st Kind

My two main bus projects today were the lighted handle by the entrance door and the Progressive Industries remote display installation.  The lighted handle needed new machine screws and some additional gasketing on the upper securement.  It turned out that all five of the screws that I removed were stripped to a greater or lesser extent.  After trying several different screws I concluded that the threaded holes must be messed up.  Butch loaned me a 10-24 tap and I used it to re-tap all five of the mounting holes.  I cut two additional pieces of the vinyl shower pan liner and trimmed them to fit just inside the upper securement.  That allowed the piece to be reattached to the body using the 10-24 stainless steel screws I bought last night without causing interference with the LED bulb.

Some time ago I bought a remote display kit for our Progressive Industries Energy Management System (EMS).  The kit consists of a second display unit and a selector switch unit.  I mounted the selector switch in the utility bay in place of the display unit, moved the display unit to the left, and connected it to the switch with the short cable provided in the kit.  I routed the long cable from the switch through the bay to the other side by the Aqua-Hot and fed it through a small hole into the electrical bay, which is the next bay going towards the front of the coach.  I temporarily mounted the remote display in the house panel.  I then repeated the work I had done yesterday to relocate the Magnum inverter/charger remote.  This time I used serial cable #1, removed the DB-9 connectors from each end, and connected the wires on each end.  The difference from yesterday is that Progressive Industries wires their cables so that pin 1 of the RJ-11 on one end is wired to pin 1 of the RJ-11 on the other end.  That meant I had to keep the wire colors the same between the two surface-mount phone jacks, i.e., black-to-black, red-to-red, green-to-green, and yellow-to-yellow, rather than cross wiring them like I did yesterday.

ITR Oasis Combi in Butch & Fonda's MC-9.

ITR Oasis Combi in Butch & Fonda’s MC-9.

Butch’s major focus today was the ITR Oasis Combi.  He and Fonda worked for much of the day running new diesel fuel lines.  By late afternoon I was done with my projects and went to work on the fresh water plumbing for the Oasis.  Prior to the last couple of weeks I had not worked with PEX tubing and fittings.  Butch has a crimper that he showed me how to use.  By the time we quit working to have dinner we had the fresh water tank connected to the inlet of the Shur-Flo 4048 pump, the outlet of the pump connected to T-fitting that supplies cold water to the house and to the Oasis Combi inlet, and the outlet of the Combi connected to the line that supplies hot water to the house.

For dinner I fixed a salad, a Thai Kitchen mushroom noodle soup bowl, and a bowl of fresh strawberries for dessert.  I took everything in the house and dined with Butch and Fonda.  After dinner I went back to the coach to try and straighten things up a bit.  I must have opened the cabinet door under the kitchen sink a dozen times to throw away food scraps, product packaging, and paper towels.  I had bundled up the various recyclables and opened the cabinet to remove the trash bag when the mouse jumped out and ran under the passenger side couch.

I say THE mouse because I presume it is the mouse that has obviously been in the coach recently based first on getting into my loaf of bread and then finding a nest where none had been previously.  It was a cute little dark gray field mouse, not more than two inches long (without its tail), but I am going to have to find a way to catch it and remove it.  I will set a live (no kill) trap next week and see if I can find it a nice field to live in somewhere far away from Butch and Fonda’s house and both of our buses.

It was still in the upper 40s and rather pleasant outside so I straightened up the back of my car rather than wait until morning.  After retiring to the guest bedroom I organized most of my clothes.  I should be packed and on the road about an hour after I get out of bed in the morning.

2014/10/24 (F) Around the World in 80 Days

As much as I have been traveling back and forth between Michigan and Indiana I feel as if I could circumnavigate the world in 80 days but today my “journey of a thousand miles” began with a 260 mile trip home.  I was up a little before 8 AM and finished packing all of my stuff in the guest bedroom and loading it into the car.  I gathered up some last minute laundry, foodstuffs, and recyclables and put those in the car as well.  I sat and chatted with Butch and Fonda until 9:10 AM and then said farewell until Sunday evening.  I pulled my car out its normal parking spot at 9:15 AM and headed east on SR-16.  I followed my usual route home from there: US-31 north to US-20 east to CR-17 north to I-80/90 (Indiana Tollroad) east to I-69 north to I-96 east to M-59 east to Hacker Road south and then home.

Hand cut gaskets for upper piece of lighted entrance handle on our coach.

Hand cut gaskets for upper piece of lighted entrance handle on our coach.

Our friend Kate had contacted us yesterday to see if we were available to go to the Meadow Brook Theater to see a live theatrical performance of an adaption of Jules Vern’s Around the World in Eighty Days.  Her cousin is working as an intern at the theater this season and was able to get courtesy tickets.  Linda was feeling well enough to go so we left early and stopped at a Panera on the way over to the theater where we met up with Kate.  The performance was very good and we thoroughly enjoyed it.  We wanted to have coffee together afterwards, but by the time we met her cousin and chatted for a while it was late and everything was closed.  Besides, we had an hour’s drive to get home and Kate probably had at least 90 minutes.

2014/10/25 (S) Here And There

Linda slept in to rest and try to recover from her cold so I went to the SLAARC Ham Radio Club Breakfast by myself.  She was awake by the time I got back and feeling well enough to run errands with me.  We stopped at Recycle Livingston and then picked up our new natural gas fireplace logs from Country Squire in Howell.  We got the business card of the independent technician who does installations for them and gave them a call to set up an appointment.  I left a message and they called us back later.  We stopped at our Bank of America branch enroute to Staples in Brighton in search of a larger size of graph paper, but they did not have the size I wanted.  I need larger paper to draw accurate designs for the custom desk/pantry and printer stand/table that we want to have made for our converted bus.  We fueled up at the Brighton Meijer’s and then bought groceries.  We needed a new coffee maker but decided not to purchase one until we had checked online.

Back home we searched for coffee makers in a white finish rather than black/stainless.  There were only a few choices and one of them was a Mr. Coffee programmable model that was available at Bed, Bath, and Beyond.  As long as we were looking for things online we found a pad of 50 sheets of 17″x22″ graph paper with a 1/4″ grid pattern and added that to our Amazon Prime shopping cart.  We also added a Camco RhinoFLEX RV sewer hose kit and various accessories.

Back side of house systems panel.  Bus conversions are complex.

Back side of house systems panel. Bus conversions are complex.

Linda had arranged for us to meet John and Diane at Camellia’s in Farmington Hills for dinner at 6 PM.  We left the house around 4 PM and stopped at the Brighton Bed, Bath, and Beyond to get the Mr. Coffee coffee maker.  We stopped at the Meijer’s in Wixom and picked up the filters and then stopped at J. C. Penney’s at Twelve Oaks Mall for some necessary clothing items.  We headed into Farmington Hills but were still early for dinner so we drove through our old neighborhood, which is very close to the restaurant.  Our former across-the-street neighbor, Dan, was working on a car in his driveway so we stopped to chat.  While we were there the young man who bought our house arrived home on his motorcycle.  He never removed his helmet before putting the bike in the garage and shutting the door, so we never actually saw him.  Our daughter handled the closing in July 2013 since we were in Wyoming at the time, so we never meet the buyer or his parents.  He has apparently been a very quiet neighbor who keeps to himself.

We got to the restaurant shortly after 6 PM and John and Diane were already seated so we did not have to wait for a table.  We had the veggie fajitas, our standard choice at this particular Mexican restaurant.  While we were dining our friends, Jim and Kristine Gullen, came in and sat in a booth near us.  When we were done with dinner John and Diane headed to their house (nearby) and we lingered for a few minutes to chat with Jim and Kristine before joining them.  Diane had bought some Coconut Bliss Chocolate with Salted Caramel non-dairy “ice cream.”  It was the best vegan ice cream we have had.  By 10 PM we were all having trouble staying awake so we said farewell and headed for home and went quickly to bed.

2014/10/26 (N) Pack and Go

We both slept in this morning, the combined effect of being tired (both of us), sick (Linda), and having taken Tylenol PM last night (both of us, again).  In spite of her cold, Linda wanted to cook something for me before I took off again for Indiana, so she made her wonderful vegan blueberry pancakes for breakfast.  We used the new coffee maker and, as expected, the coffee tasted the same as with the old one.

After breakfast we sorted and folded laundry (we have such exciting lives) and I selected and packed the items I needed for the week ahead.  I had not copied photos from my laptop to the network drives since October 10th so I took care of that.  I also made more careful measurements of the dimensions of our color laser printer to use in refining the design of the printer cabinet for the bus.  Likewise, I took measurements of our Dewalt air compressor as I plan to build a wooden divider for the back of the Honda Element that will secure it on the floor and create space next to it and above it for storing other things.  Obviously the two rear seats will be removed when this insert is in use.

Junction boxes for the ME-ARC remote (bottom) and the PI-EMS-50 (top)in the house systems panel.

Junction boxes for the ME-ARC remote (bottom) and the PI-EMS-50 (top)in the house systems panel.

By 2 PM I was ready to load the car so Linda helped me with that task.  I pulled out of the driveway at 2:16 PM and followed my usual route to Indiana: Hacker Road north to M-59 west to I-96 west to Lansing Road south to I-69 south to I-80/90 (Indiana Tollroad) to CR-17 south to US-20 west to US-31 south.  I exited US-31 at IN-25 (Rochester), topped off my fuel tank and then picked up fresh greens and fruit at the Kroger.  I headed south on IN-25 to Fulton where I took Aitken Road east to Meridian then headed south to SR-16 and finally headed east to Twelve Mile.

Butch and Fonda had their family holiday gathering today.  They had 27 family members in attendance during the day and for dinner but by the time I arrived (7:45 PM) everyone had left except Brittiny and Rock, and they departed while I was unpacking food and storing it in the coach.  I moved all of my clothes and technology into the guest bedroom, like I always do, and then visited with Butch and Fonda for a while before retiring to my room for the evening.  If the weather forecast holds true we have two unseasonably nice days in store on Monday and Tuesday and the rest of the week doesn’t look too bad either. We have a lot to do and could use some favorable weather.

2014/10/27 (M) Heat and Light

We had an unseasonably nice day for working outside.  It was already in the upper 40s when we got up and made it in to the 70s under partly cloudy skies with breezes from the southwest.  I was up before 8 AM and had my usual granola, orange juice, and coffee for breakfast and then got to work.

Butch worked most of the day on assembling the two fan-coil heat exchanger units that will get plumbed into their ITR Oasis Combi diesel-fired hydronic furnace to provide heat to the house portion of their converted bus.  While he worked on that I worked on replacing our patio light.  The ballast on the old one was no longer working and the way the unit was designed it could not be replaced.  Butch happened to have an identical unit, so I used it as the replacement.

Old patio light fixture after being removed from the side of the coach.  Not pretty.

Old patio light fixture after being removed from the side of the coach. Not pretty.

The old unit was not removed from the coach when it was painted.  This was a nice idea at the time as it provided a paint seal on the top and both sides where the unit met the side wall of the bus.  Unfortunately, removing the unit required me to cut the paint seal with a very sharp knife.  The unit was secured with two screws, but it was stuck to the side of the coach with a generous amount of automotive putty.  Most of it came off with the fixture, but not all, so after I cut the two wires and removed the fixture I had to carefully scrape the rest of it off using the thin end of a wood shim.

I checked the voltage at the two wires coming out of the wall and I definitely had 13 VDC controlled by the same switch that turns the lighted entrance handle on and off.  I prepared the back of the new fixture using new automotive putty to create a seal all the way around the back at the outside edges.  I also placed a ring of putty around each of the screw holes in the back and the access hole for the wires.  I attached shielded spade lug disconnects to all four wires, held the fixture in place, and connected them.  I pressed the fixture into position, lined up the screw holes, and secured it.  I put the two F8T5 florescent tubes back in, snapped the cover back in place, and made sure the on/off pushbutton switch on the bottom was in the on position.  I then applied a bead of NAPA RTV Black Silicon Rubber sealant along the top seam and the two sides.  (Sorry Michele, but I had to make sure it was not going to leak.)

The switch that controls this light is one of three in a 3-gang box next to the passenger seat and is the one closest to the entrance door.  I had removed the cover plates last week so today I took another look and it appeared that the other two switches did not have any wires connected to them.  I removed them and that was indeed the case.  I think tomorrow I will re-wire this so the first switch controls only the lighted entrance handle and the second switch controls only the patio light.  If I cannot figure out something to control with the third switch I will probably leave it out and get a new cover plate that has two switch openings and a blank, assuming I can find one.

With the patio light project done Fonda helped me remove the fan belt and the two A-C compressor drive belts from the engine in our bus.  We put the two compressor drive belts (NAPA CG-96) back on but reversed their position.  The inside one seemed loose compared to the outside one last week and we wanted to see if switching them would fix that problem.  We then installed the new fan belt that I ordered/received last week.

I started the main engine and let it run for a while on high idle with the air-conditioning turned on to put some load on it.  The CG-96 that was now on the outside of the pulley still appeared to be looser than the other one, so I think I will order a replacement set.  The new fan belt ran very smoothly.  I turned the A-C off, dropped the idle down, and shut off the engine.  I started to close the rear access hatch but found that it was stiff and made a sound like an elephant trumpeting.  I sprayed some WD-40 on all the hinges and on the piston rods for the air springs.  I then put a small amount of NAPA Syl-Glide on the piston rods, worked them up and down a few times, and wiped off any excess.  The hatch now opens and closes smoothly and quietly with less effort.

Butch pressure washing the radiators for his fan coil heat exchangers.  MC-9 (L) and H3-40 (R).

Butch pressure washing the radiators for his fan coil heat exchangers. MC-9 (L) and H3-40 (R).

While I was lubricating the hatch Butch was using a pressure washer to clean the radiators (heat exchangers) for their fan-coil units.  As long as he had it out, he sprayed around all of our front windshield seals while I looked for leaks inside.  We found three for sure.  One was in the upper inside corner of the lower driver-side windshield between the center pillar and the seal.  The second one was in the lower outside corner of the upper driver-side windshield between the seal and the glass.  We were not able to identify the point(s) of entry for the third one but it appeared to be somewhere above the upper windshields near the center pillar, a least that was where the water was coming in on the inside.  I cannot see the underside of the front cowling in that area and there are lots of places water could come in: five front marker lights, two upper windshield mounts, and perhaps a dozen screws on top of the front roof holding various things down.

Leaks are annoying and potentially destructive so I am still pondering what I want to do.  We have new windshield seals but have had trouble finding someone locally to install them.  For one thing, the bus really needs to be inside for that work and most glass shops, including ones that work on “semi tractors,” do not have overhead doors high enough for the bus.  I may make judicious use of the NAPA RTV Silicone Rubber sealant or I may just use black tape as a temporary fix.

When we were done checking the windshields I used the pressure washer to clean off the coach as best I could.  The last time it was cleaned was right before we left Williston Crossings RV Resort in early April and it had accumulated a few miles, bugs, and dirt in that time.

Because the weather was so nice Butch decided to replace a short section of badly deteriorated coolant hose on their engine rather than risk having it fail on the road.  He shut some valves to isolate the engine from the coolant lines that provide heat to the coach and drained quite a few gallons out of the engine (almost three 5-gallon buckets).  The old hose turned out to be extraordinarily difficult to remove. The new piece was no easier to get in and required modification of two parts.  This was definitely not a job you want to do on the side of the road in any kind of weather.

While Butch and Fonda worked on the coolant hose I tinkered in the dashboard area of my bus.  First I replaced a couple more bulbs in illuminated switches.  I then pulled the CB radio out of the dash to see how the coaxial cable (transmission line) was marked.  That allowed me to identify the other end in the old ceiling-mounted TV cabinet behind the driver’s seat.  I also looked around in that cabinet for the other end of the coaxial cable that was once connected to the antenna for in-dash AM/FM radio/cassette/CD player.  I did not see anything that looked right, so I pulled the radio out of the dash (actually the whole panel along with four switches) to get the identifying marks off of it. Even with that information I was not able to locate the other end of the cable.

Working on the bus and living in the bus are often not compatible.

Working on the bus and living in the bus are often not compatible.

By that point it was 6 PM and we had weather approaching from the southwest.  Clouds had moved in, greatly reducing our natural light, and gave the first indications of the rain that was forecast for the evening hours.  I will look again for the radio antenna cable tomorrow as I have a TuneTrapper antenna that I want to install on the underside of the front roof via the old TV cabinet and I need to plug it into the cable that goes to the radio.

I had a small glass of Moscato while I prepared my dinner.  I fixed a salad of power greens with peanuts, dried cranberries, and fresh diced onions and finished a bottle of Ken’s Sweet Vidalia Onion dressing.  I grabbed a can of Amy’s “No Chicken Noodle” soup, some crackers, my jar of peanut butter, and some ICE brand water and went inside to eat with Butch and Fonda.  I returned to the coach after dinner, cleaned up my dishes from the day, and bagged up my recyclables.  We bought a small container on Saturday that is intended for storing pet food but it has a gasketed lid with a snap latch that I thought would make a nice mouse-proof kitchen trash can.  (I figure the mouse will leave if it cannot get any food.)  Alas, the container does not fit in the base cabinet under the kitchen sink so it will likely end up being used for its intended purpose after all.

2014/10/28 (T) Under the Bus

In corporate life “getting thrown under the bus” is not a good thing, but if you are the owner/builder/maintainer of a converted highway coach, getting under the bus will eventually be a necessity.  Today was finally my day, but not until mid-afternoon.

The forecast for today was for rain in the morning tapering off to zero by noon and then turning sunny; and that is exactly the day we had.  Knowing that the morning would be wet, I took a couple of Tylenol PM last night and slept in a bit later than normal.  After my usual breakfast of granola, orange juice, and coffee, with some spicy V8 thrown in for good measure, I set to work on the interior of the old TV cabinet located above and behind the driver’s seat.

Yesterday I pulled the CB radio and the AM/FM radio out of the dashboard and identified how the coaxial antenna cable for each one was marked.  I located the cable for the CB in the TV cabinet but was not able to find the one for the AM/FM radio.  I got my twin tube florescent worklight and rigged up a couple of zip ties with mounting tabs to hang it from.  I looked again this morning but still could not locate the AM/FM radio antenna cable.  Rather than waste time not finding it I decided to organize the inside of the cabinet which has had an outlet strip, an OTA TV antenna controller, the Wi-Fi Ranger POE adapter, DC power supplies, and a mess of cable that has been lying around in it for a couple of years now.

Using the tab mount zip ties I coiled each cable and secured it to one of the two side walls.  The OTA TV antenna cable (signal and control) was very long, so I wound it around a 5-gallon plastic bucket to make a nice round, large coil.  The outlet strip had mounting slots on the back, so I mounted it to the wall on the lower half of the back of the cabinet.  The upper half of the back is open to the area above the driver and entrance stairs and under the front cap of the roof.

Late in the morning I took a break from the TV cabinet work and helped Butch cut access panels out of a 1/8″ aluminum sheet that will cover the inside of their entrance door.  We tried using a sabre saw but the only blade we had was not sharp enough or was the wrong type.  We used his Ryobi cordless reciprocating saw with a metal cutting blade and it made much quicker, and surprisingly clean, cuts.  I then used Butch’s angle grinder to round the corners of the sheet and remove burrs from all of the cut edges.

I stopped for lunch around 2 PM and enjoyed a hummus and onion sandwich.  By the time I was done the day was as warm and sunny as it was going to get so I decided to scoot under the bus and measure the ride height linkages.  This was the first time I have been under the bus.  Please note that the bus was supported on four stands that Butch made for me out of 1/2″ steel plate and 4″ square steel tube with 1/2″ thick walls.  In other words, the bus was not supported by the tires and air springs so the bus would not move if there was a failure in one of those components.

H3-40 front axle ride height valve and linkage.

H3-40 front axle ride height valve and linkage.

The linkage in the front was easy as I could slide under the bus just in front of the driver side steer tire and then sit up between the front tires with lots of room to work.  The linkage is directly above the center of the front axle and connects the axle to a lever arm on an air valve that determines the amount of air that goes into the front airbags (when in drive mode), and thus sets the suspension at “ride height.”  Butch wanted me to remove the linkage but I chose not to.  As it turned out I should have and will probably slide back under the front tomorrow and remove it.

The rear linkages were much more difficult.  First of all, there are two on them, one for each end of the drive axle.  They are located just inside the body panel directly in front of the outside dual drive tire and are covered by a protective shield.  The shields are bolted on at four points, none of which are easy to reach and one of which ultimately required me to get under the rear end of the bus.  Access is much tighter here because of:  1) The dual drive tires on each end of the drive axle; 2) The drive axle carrier, and; 3) The exhaust pipe for the Aqua-Hot which runs under the bus from the passenger side to the driver side where it ends up next to the exhaust pipe from the generator.  I was able to scoot under the bus from the passenger side just in front of the drive tires, but just barely, and once I was under far enough to sit up there was much less room to work compared to the front.  Because of the difficulty of getting to the linkages to make an accurate measurement of the center-to-center distance between the mounting bolts I went ahead and unbolted them and removed them.

The linkages consist of a length of metal rod approximately 1/4” in diameter with a rubber bushing on each end that looks a bit like and eye-bolt.  The rubber bushings slip over the ends of the metal rods and are secured with band clamps.  They appear surprisingly fragile given the critical nature of their function, and Butch has already had one that was only a couple of year’s old break on their coach.  He ordered metal versions in both left-hand and right-hand threads and is going to assemble replacements using threaded rod and stop nuts.  With a left-hand threaded bushing on one end and a right-hand threaded bushing on the other end we will be able to turn the threaded rod one way to increase the distance between the two mounting bolts and the other way to shorten it, affecting both ends equally in the process.  The stop nuts will lock the bushings relative to the threaded rod so they do not move in operation.  All-in-all this will be a neat little project.

In spite of the lovely weather Butch needed to get to the NAPA store in Logansport before they closed at 5:30 PM.  At 4:30 PM I wrapped up my work with the linkages, put all of my tools away, washed up, and grabbed my wallet, cell phone, and shopping list.  We got to the NAPA store a little after 5 PM and took care of our business there.  We then headed to the O’Reilly’s Auto Parts store for a few other things.  I called Linda and chatted briefly with her and was relieved to hear that she sounded, and was feeling, considerably better.  Butch called Jaral Beatty to see if he had finished cutting the oak valences for the front of their bus.  He had, so we swung by Jaral’s shop to pick them up.

Front flat-panel TV/monitor with cabinet door closed.  Look ma, no wires!

Front flat-panel TV/monitor with cabinet door closed. Look ma, no wires!

While we were at Jaral’s he ripped a nice piece of 3/4″ thick oak for me to just under 3″ wide.  The piece was about 4′ long and he did not charge me for it.  I plan to attach this piece of wood to the center windshield pillar and use it as a mounting plate for a compass, flat panel monitor, PressurePro TPMS receiver, and the mirror that is currently mounted at the intersection of the four windshields.  I have to do this, of course, in such a way that it does not obscure my vision while driving.  From Jaral’s shop we went to Home Depot where I bought a thin (1″ thick), 13″ long, under-cabinet, single-tube florescent, AC powered light fixture.  I also got a blade for my Porter-Cable oscillating saw.

When we got back to Twelve Mile a little after 7 PM Fonda started preparing their dinner and I did the same.  I had a nice salad of power greens with onions, dried cranberries, and roasted peanuts topped with a sweet and sour dressing.  I also had a bowl of Thai Kitchen spring onion soup, some canned pears, and half a piece of pita pocket bread.  After dinner I washed my recyclable containers and went back to the coach for a while where I cleaned and dried a few utensils.  I then mounted the new light fixture in the TV cabinet.  As I expected, it provides very nice illumination for the entire inside of the cabinet.

Depending how the day goes tomorrow I plan to continue working in the front TV cabinet.  I would like to mount the TuneTrapper AM/FM antenna and get it connected to the AM/FM radio.  Butch’s brother, Tom, is coming over sometime during the day to winterize his motorhome.  Butch called and asked him to bring the faceplate from an old Kenwood radio that he had that was very similar to the one in our dashboard.  The backlight illumination bulb is burned out on ours.  I also need to create an access slot in the door for cables to pass between the back of the flat panel TV (which is mounted to the outside of the door) and the inside of the cabinet.  To create this access slot I will have to drill holes centered along a line and then use Butch’s root-zip tool to connect the holes into a slot.  The bushings for the ride height linkages are supposed to be in tomorrow, so we will be making a morning trip towards Kokomo to pick them up.  Butch is also trying to tap into the engine coolant loop that provides OTR heat for their bus as part of the Oasis Combi installation, so it is likely to be a very full day.

2014/10/29 (W) Outside In

My main project today was once again the front TV cabinet only this time the focus was on cutting a horizontal opening in the door behind the flat panel TV that is mounted on the outside of the door.  The approach I used was to drill two 1″ holes, one at either end of a horizontal line, and then use a roto-zip tool as a mini-router to connect the tops of the holes together and the bottoms of the holes together, creating a horizontal slot with rounded ends.  The slot is below the horizontal center line of the TV set and offset to the left (as viewed from the front of the TV) to line up with the area on the back of the set where the power, video, and data cables exit downward.  The position of the slot allows them to gently bend and pass from the outside of the cabinet to the inside of the cabinet where they get connected.  This also allows the cabinet door to be closed and latched with none of the cables visible.  It sounds simple but it took me a good part of the day to get it done.  We have a second flat panel TV in the bedroom mounted on a similar door that covers another old TV cabinet.  Cutting a similar slot in that door is on my task list for tomorrow.

Front TV cabinet; making use of the space where the 10" CRT was mounted.

Front TV cabinet; making use of the space where the 10″ CRT was mounted.

When I wasn’t working on the TV cabinet I spent a few minutes learning how to use an air-powered cutoff tool and giving Butch a break by using it to help cut off a piece of the center tunnel sidewall in their passenger side front bay.  Butch is removing this panel in order to gain access to the engine coolant lines that provide heat for the bus when it is underway.  He needs to tie a stacked-plate heat exchanger into these lines as part of the ITR Oasis Combi hydronic heating system installation.

Butch spent most of his day working on their Suburban installing a Ready-Brake auxiliary braking system and extra rear lights for towing.  I checked in with him from time to time, but he was either in the middle of one-person tasks or had Fonda helping him.  Late in the afternoon we rolled his Ryobi belt sander out of the warehouse and used it to sand his two valence boards and my piece of oak that we picked up yesterday from Jarel.  We had to change the sanding belt and it took us a few tries to get it right, but it did a nice job on the boards once we had a good piece of sandpaper on it.

By the time we finished it was twilight and very cool.  Tom and Tracy showed up about then to winterize their motorhome.  There was a locked cover over the fresh water fill connector and none of Tom’s keys would open it.  I got a long flat-blade screwdriver and was able to slip it up under the cover and pop the lock.  I left the winterizing to Butch and Tom and retreated to my coach to putter and contemplate (and eat) at a lovely 67 degrees F.  The Aqua-Hot has been working very reliably, cycling on and off automatically in response to the space and water heating demands of the coach.

Tom brought an old Kenwood car stereo that he got from Butch a while back.  Although similar in appearance to our Kenwood dashboard radio, it was not similar enough.  The electrical connector on the back of the removable faceplate was in a different location than ours.  I had a Singapore Noodles dish in the coach and then made a salad to take into the house and dine with Butch and Fonda.  It was after 9 PM by the time we were done eating and I turned in for the night shortly thereafter.

 

2014/10/08-15 GLCC and Bus Work

2014/10/08 (W) Rally Ho!

Today was a travel day so I had a light breakfast and went to the Small Town Brew for a cup of coffee rather than create a mess making my own.  I donated $2 for this cup and did not have a refill so the three cups I consumed over the last two days averaged out to $1 each.  I spent most of the morning helping Butch investigate possible routes for the engine preheat plumbing for their new International Thermal Research (ITR) Oasis Combi diesel-fired hydronic heating system.  I also adjusted the front bus tire pressures and all four of the car tire pressures.

As noon approached I switched to departure mode.  I changed out of my work clothes into something cleaner and more comfortable for driving, finished packing all the stuff I had in the guest bedroom, and loaded it into the bus or the car.  I targeted a 1 PM departure.  Butch had to go to town so we said farewell until Friday and he took off.  By the time I started the bus, pulled it across the street, moved the car over, hooked it up for towing, and checked the lights (with Fonda’s help) it was closer to 1:30 PM than 1:00 PM.

The drive to Elkhart was pleasant and uneventful.  The speedometer sat on zero for the first quarter of the trip, bounced around for the second quarter, indicated 85 MPH (max speed) for the third quarter, and settled in to something like the correct speed for the final quarter.  This is the way it had behaved for quite some time before it got unplugged so this confirmed that it did not work correctly and needed to be replaced.

I took SR-16 east to US-31 north to US-20 east to CR-17 north.  CR-17 becomes MI-217, the Michiana Parkway, which ends at US-12.  I took that west to Old M-204 west and followed it past Phoenix Paint back into Indiana where it becomes SR-19 south.  I turned east on CR-4 and a mile later turned into the entrance to Elkhart Campground on the south side of the road.  This route is at least 15 miles longer than necessary.  There is an exit for SR-19 north off of US-20, which is a much more direct route, but requires driving through the heart of Elkhart.  There was major road construction on this stretch of SR-19 the last couple of years, including a bridge, with narrow lanes and weight restrictions.  That work is all completed, and the road is much better now, but it is still a more urban route with stop lights, turns, and traffic.

Our coach (front, right) at the FMCA GLCC Surplus & Salvage Rally, Elkhart CG (Elkhart, IN).

Our coach (front, right) at the FMCA GLCC Surplus & Salvage Rally, Elkhart CG (Elkhart, IN).

I checked in to the campground and then got parked in my assigned site.  I was one of the last coaches to arrive.  I went through my arrival routine and got the coach setup to use before visiting with fellow GLCC chapter members, some of whom I had never met.  I chatted briefly with Michele Henry from Phoenix Paint to confirm her availability to work on a BCM article later in the evening and then went to Martins supermarket to get a salad for dinner.  The Martin’s supermarket on SR-19 at CR-4 has a really nice salad bar and I made a big salad with lots of ingredients, all vegan of course.

I took my salad over to the meeting room at 6 PM and had dinner with the group.  I was expecting Michele at 6:30 PM so I excused myself and went back to my coach.  She showed up a little after 7 PM.  We worked until almost 10 PM and managed to go through the entire article.  I did not have the photos on my new computer so the selection, processing, and captioning of images will occur later.

2014/10/09 (R) GLCC Surplus and Salvage

I went over for coffee around 8 AM without eating breakfast first.  By 9 AM plans had been made for car pools to visit the various RV surplus and salvage businesses in the area.  I went back to the coach and had a grapefruit for breakfast and then spent the morning taking care of e-mail and uploading blog posts starting with September 19th.

By noon I was tired of staring at my computer so I turned my attention to the speedometer.  After removing the dashboard cover I figured out a socket and ratchet combination that allowed me to remove the two Nylok nuts from the back of the instrument.  With the retaining bracket removed the old instrument slipped out the front of the dashboard.

Rear view of new VDO speedometer with custom adaptor cables.

Rear view of new VDO speedometer with custom adaptor cables.

I needed to redo the wiring so I got out my electrical tools.  I also tested to voltage to verify that the lighting circuit was 24VDC.  It was, and the actual instrument runs on either 12 or 24, so it didn’t care.  The existing connectors for the old instrument appeared to be the same 4-pin flat connectors used in personal computers for providing power to hard disk drives, CD drives, and other peripheral components.  I checked online and found that Michiana PC was located behind Menard’s a short distance away on the other side of the toll road.  I got an adapter cable with the proper connectors on it and then stopped at Menard’s for two different spade connectors.  As long as I was out driving around I stopped at Phoenix Paint to pick up coupons for Marco’s Pizza.  Since I had to drive past Martin’s on the way back to the campground I stopped and bought groceries.

The new VDO speedmeter temporarily connected.

The new VDO speedmeter temporarily connected.

Back at the coach I put the groceries away and got back to work on the speedometer project.  I cut leads from the old instrument light wiring as I needed the plug.  I then cut the unneeded end off the computer power cable.  I wired the lighting connector, spade connectors, and jumpers.  I then wired the instrument connector spade lugs to the computer power cable.  When all the wiring preparation was done I attached all of the wires except the two for the signal (#16 & #20) and connected the cables to mating chassis connectors.  I temporarily set the speedometer in dashboard hole, turn the chassis batteries on, and then turned the light switch on for the dashboard lights.  The speedometer lights worked, so I turned the ignition to ‘ON’ without starting the engine.  The gauge needle swept up to max and back to zero and the odo displayed 0.0.

I turned the ignition off and disconnected the chassis batteries.  I then pulled the instrument out of the dashboard and disconnected the two cables.  I got the H3-40 Service Manual out and figured out which wire was the + signal (#16) and which one was the ground (#20).  With the cables protruding through the mounting hole from the rear I pushed the spade terminals fully on and reconnected the cables.  It was getting to be late afternoon by this point and I decided to leave the finally assembly for tomorrow.

The new VDO speedometer (above & right of center).

The new VDO speedometer (above & right of center).

I took a shower and shaved and had plenty of hot water as the Aqua-Hot continued to cycle automatically.  I prepared an Annie’s Kung Pao noodle bowl for dinner and took it over to the meeting room at 6 PM.  I stayed there until 8 PM enjoying bus chat with a small group of chapter members that I know well.

The new VDO speedometer installed in the old hole.

The new VDO speedometer installed in the old hole.

Several members developed problems with their BCM subscriptions over the summer.  Pat Lintner gave me a flash drive so I could provide him with the issues he did not receive.  I took care of that back at the coach and then continued to upload blog posts and respond to e-mails.  I was two days behind on writing blog posts and stayed up until I was caught up which made for a very late night.

2014/10/10 (F) Bus Business

I was up way too late last night catching up on writing drafts of blog posts for the last few days.  Linda sent a text message this morning at 6 AM that I read at 7:30 AM letting me know that she was starting the drive to Elkhart.  I went over to the meeting room at 8 AM to have coffee and Linda showed up at 9 AM.  We visited with the other rally attendees until 10 AM and then went back to our coach to have granola for breakfast.

L-to-R:  GLCC secretary Tami Bruner, Newsletter editor Scott Bruner, and Treasurer Linda Fay.

L-to-R: GLCC secretary Tami Bruner, Newsletter editor Scott Bruner, and Treasurer Linda Fay.

At 10:30 AM we drove to Phoenix Paint to deliver some additional copies of Bus Conversion Magazine to Michele and visited with her and Roxanne for a while.  Josh was supposed to come look at our coach in the afternoon but had to make an unexpected trip to Chicago.  Michele called him and got him rescheduled for tomorrow morning between 9 AM and noon.

Before returning to the campground we stopped at Martin’s supermarket for salad toppings and Radio Shack for a miniature “grain of wheat” light bulb.  Radio Shack did not appear to have the bulb I was looking for, but I learned later in the day from Butch that the bulb I need comes with two bare wire leads that fold over to form the contacts.

GLCC members gathered for the Friday evening dinner and business meeting.

GLCC members gathered for the Friday evening dinner and business meeting.

When we got back to the coach we were going to have lunch but I got busy giving a tour of our bus tour and then touring the late 1990’s MCI 102D Vantare conversion parked next to us.  Butch and Fonda arrived (in their car) while all of that was going on.  We visited for a while and then they took off for Bontrager’s RV Surplus store.

Many of the GLCC members were away shopping for surplus bargains so we hung around our coach where I worked at my computer and Linda read until she got tired and laid down briefly.  I was thinking about lying down too when Pat Lintner stopped by and then Butch/Fonda returned.  Before we knew what had happened to the afternoon it was getting to be dinner time.  Linda made our dinner salads and we went over to the meeting room a little before 6 PM where we enjoyed our salads in the company of our friends.  President Larry Baker conducted a brief business meeting at the conclusion of which Linda was elected to another 2-year term as chapter Treasurer and I was elected to a 2-year term as chapter President.  Dean Chipman was elected chapter Vice-President and Tami Bruner was elected chapter Secretary.  Pat Lintner stayed on as National Director and Frank Griswold as Alternate National Director.

L-to-R: GLCC National Director Pat Lintner talks to newly elected President Bruce Fay and members Charles Martin and Ed Roelle.

L-to-R: GLCC National Director Pat Lintner talks to newly elected President Bruce Fay and members Charles Martin and Ed Roelle.

Butch and Fonda had to get back to their home to tend to their dogs and left shortly after the voting was concluded.  We visited for quite a while with the chapter members before returning to our coach for the evening where we had a glass of wine and went to bed.

2014/10/11 (S) Transfers

The day dawned clear and cold with the morning low temperature in Elkhart at 32 degrees F and frost on the ground and vehicles.  We went over for coffee at 8 AM and chatted with fellow chapter members while they had breakfast.  Josh was supposed to come look at our coach between 9AM and noon but called to see if late afternoon would be OK.  It was fine with me and he agreed to call before he came over.

We returned to our coach and had granola for breakfast.  We spent the morning chatting with folks, including the Thornton’s, who stopped by to pay their dues.  We had transferred some things to Linda’s car yesterday and transferred some more things this morning.  By noon Linda was packed and ready to leave for home.  She texted me later to let me know she had stopped in Ann Arbor to visit family and shop at Whole Foods Market before getting back to our house.

Ed Roelle and Marty Caverly came to our coach to listen to our Aqua-Hot.  Ed agreed that it should not be producing any visible exhaust after initial startup and thought a likely cause was worn bearings in the blower shaft causing reduced rpm which resulted in reduced air flow which resulted in a rich fuel/air mixture.  Ed and Marty both thought the unit sounded normal for a unit with worn bearings.

After looking at the Aqua-Hot I found former chapter President Larry Baker at his coach and we transferred quite a lot of “presidential stuff” to my car.  He had been collecting and transporting this “stuff” for the last six years and was all too eager to be rid of it.

Josh called at 3:45 PM to let me know he would be at my coach around 4:45 PM.  I made a quick run to Radio Shack to check again for the “grain of wheat” 12 VDC bulb, but they did not have it in stock.  Josh arrived a little before 5 PM and we discussed our desired interior renovation for over an hour during which time he also took measurements.  By the time we wrapped up our discussion most of the rally attendees had left for dinner at a local restaurant.  I called Linda and then had dinner in the coach; a simple green salad, a roll with garlic vegan butter spread, and grapes.

I decided to top off our fresh water tank while there was still some daylight rather than doing it in the morning when it was forecast to be cold.  After the tank was full I shut off the water, disconnected and drained the hoses, and stowed them in our fresh water tub.  I removed and stowed the pressure regulator and water softener.  I then turned each of the three Aqua-Hot loops on, one at a time, to see if I could figure out which circuit included the heat exchangers in the water bay and front storage bay.  As best I could determine, the bays are plumbed into the bedroom circuit.  I would have preferred to have them plumbed in with the bathroom as we like the bedroom cool for sleeping but want to be able to keep the bays warm enough to avoid freezing.

Scott Bruner and his dad, Richard, were out so I chatted with them about the Aqua-Hot.  The Marin’s had a propane camp fire going at their rig next to ours so we went over there to talk for a while.  I finally got cold and went in for the night around 9:45 PM.  I uploaded the blog posts for the last three days of September and then went to bed and worked on this one.

2014/10/12 (N) Arduino SBC

I got up around 7 AM, got dressed, and spent an hour packing clothes, computers, and other things that would eventually be transferred to the car for the trip home.  I went to the meeting room at 8 AM to have one cup of coffee and socialize with the GLCC chapter members who had come over for breakfast.  There are special names for breakfast on the last morning of a rally.  The one I like best is “hitch up breakfast.”  Whether you have a motorhome towing a car or a car/truck pulling a trailer, most RVers have something that has to be hitched up for towing before they can depart.  It is also a distant but quaint reference to hitching up a team of horses to a wagon; the original RV having one to six horsepower.

I do not normally have coffee or breakfast on days when I have to drive the bus, but the bus driving portion of my day was only going to be two hours and I would not be pulling out until sometime between 10 and 11 AM.  Those who wanted to eat breakfast were done by 9 AM and a crew of women busied themselves cleaning the kitchen and re-packing the supplies.  Some of those supplies were destined for my car which was already connected to the back of our bus, so everything got loaded into Pat and Vicky Lintner’s car and they brought it over to my site and I transferred it to my vehicle.

I dumped the waste water holding tanks and stowed the drain hose.  By 9:45 AM I was packed and had the bus and car ready to travel except for a few last minute details.  I joined a small group of guys for some final conversation as several coaches pulled out.  I was in a site directly behind Scott and Tami Bruner and although I could have left before them it was going to be a lot easier to wait until they pulled out, which they did shortly after 10 AM.

I went through the final steps of preparing the car to be towed, turned the coach chassis batteries on, turned the shore power off, disconnected the shore power line, and stowed it.  I had opened all the air valves earlier, so I secured all of the bay’s, locked the entrance door (from the inside), and started the engine.  While it was building air pressure for the suspension and brakes I called Linda at 10:29 AM to let her know I would be underway shortly and then called Butch.  I did not get an answer at Butch and Fonda’s house so I called Butch on his cell phone.  He had misunderstood my travel timing and indicated that they might not be home yet when I arrived at their place.

I pulled out of my site at 10:30 AM and reversed the route I had taken on Wednesday, going east on CR-4 (IN) to SR-16 (IN) north, to Old M-204 (MI) eastbound to US-12 (MI) east to M-217 (MI) south (the Michiana Parkway), which became CR-17 (IN) southbound.  I left CR-17 and got on westbound US-20 over to US-31 south which I stayed on all the way to SR-16 west towards Twelve Mile.  I had a call from Pat Lintner while I was driving regarding the dates for the 2015 Surplus and Salvage rally which will be in mid-September.

I arrived in Twelve Mile at 12:15 PM.  I got the car detached and moved it out of the way.  While I was doing that Fonda got home from church.  After tending to their two dogs (Rascal and Daffy) she helped me back the bus across the street into its parking spot next to their bus.  I plugged in the shore power cord to get AC power to the house systems but left the bus systems on temporarily so I could reprogram the new VDO speedometer.

On the drive from Elkhart the speedometer, which had not been calibrated, was indicating just under 8 MPH when I was traveling 60 MPH according to my GPS.  That meant the signal from the Allison ATEC transmission computer was putting out fewer pulses per mile than the default speedometer program.  For some reason I thought the default might be 200,000 PPM so I computed the ratio between actual and indicated speed and divided  200,000 by that number which gave me 26,316.  I programmed that in using the PULSE mode but would not be able to test it until later in the week.  If the indicated speed is in the ballpark I will use the ADJUST mode to manually move the pointer to indicate the same speed as the GPS.  There is also a CALIBRATE mode that counts the pulses over a one mile distance and then programs that into the instrument.  That is the most accurate way to calibrate the speedometer/odometer if you have someplace safe to do it with accurate mile markers.

With that done, I turned off the chassis batteries and the unneeded air circuits in the front bay but left the valve for the engine air accessories turned on.  I typically do this when I leave it with someone in case they have to start it.  I turned the Aqua-Hot electric heating element on and turned on the bedroom thermostat but set the temperature to a cooler setting.  The heat exchangers in the water bay and front storage bay appear to be tied-in with the bedroom heat exchanger.

I transferred stuff from the coach to car the car and by 1:25 PM I was ready to roll, but Butch called and said he was almost back to the house so I waited for him.  He had made progress on the Wiremold in the bus kitchen and wanted me to see it.  He had also bought a 125 A main lug electrical panel so we discussed the mounting and installation, part of which I will probably work on later this week.  He had also received the ITR Oasis Combi unit, so I had to see that too.  Fonda built a 3-D cardboard mockup and Butch had it sitting in the water bay where he plans to install the Combi.  We will probably do more work on their bus than on ours over the next two weeks, but that’s OK; their bus has more/critical projects at this point than ours and he has helped me a lot with our projects.

I pulled out at 2:05 PM and decided to take a slightly different route home:  SR-16 east, US-31 north, US-6 east, I-69 north, M-60 east, I-94 east, M-14 east, US-23 north, M-36 (Nine Mile Road) east, Pontiac Trail north, to Dorothy Street and the SLAARC monthly meeting at the South Lyon Witch’s Hat Depot.  I do not usually take US-6 across Indiana although it is a fine road known as the Grand Army of the Republic Highway.  It is flatter than US-20 with more towns and associated lower speed limits and stop lights, but it was a nice drive with different scenery.

I arrived at the SLAARC meeting at 7 PM.  The business meeting was already concluded and Mike (W8XH) was setting up for his program on the Arduino SBC (single board computer).  He bought the experimenters kit and had been playing with it enough to discuss it with the group.  Larry (K8UT) discussed the four projects he has built using the Raspberry Pi platform and passed around some of the hardware.

It was 9 PM by the time I finally got to our house.  Linda helped me completely unload the car as I had an 8:30 AM service appointment at Brighton Honda and she was leaving before 6 AM for the bakery.  She had fixed some strawberries for me and they made a nice treat after a long day of snacking on vegan junk food while driving.  I worked for a while on this post before turning in for the night.

2014/10/13 (M) Grain Of Wheat

Linda was up early and out the door at 5:45 AM.  I got up a little after 7 AM, started a load of laundry, had a couple of homemade muffins, and got ready to take my car to Brighton Honda for its 90,000 mile service.  I got coffee at the Dunkin Donuts across the street from the dealership first and waited in the lounge working on yesterday’s blog post while they worked on my car.

I forgot to specify synthetic oil so the put in regular oil.  When the car was done I headed to Novi and immediately noticed a front-end shimmy that was not there when I dropped it off.  They had rotated the tires and may not have re-torqued the lug nuts correctly.  It also pulled to left, which might be a tire inflation issue.  I did not have time to take it back so I will see if it settles out on the drive to Indiana tomorrow.  If not, I will need to get at least the front tires/wheels loosened and retightened, and perhaps balanced.  Worst case I will have to get the front end aligned.

I found the FedEx/Kinko’s on Grand River Avenue just east of Novi Road and made 10 copies each of two 24″x36″ electrical diagrams; one for the DDEC I ECM (Engine Control Module) and one for the Allison 700 Series ATEC (Automatic Transmission Electronic Control).  I folded up an ATEC diagram for me and one for Chuck and rolled up the other eight and put them in a tube for safe keeping.  Chuck and I have DDEC II’s controlling our main engines so I rolled the 10 DDEC I diagrams up and put them in a second tube to protect them.  By the time I was done it was 10:45 AM and Chuck was at his shop just up the street so I drove there.

He had installed a dual battery maintainer and wanted me to see it.  He mounted it on the back wall of the small bay above the passenger side drive tire of their bus which got it close enough to the chassis batteries (in a tray above the tag tire) for the built-in charging cables to reach the correct battery terminals.  He was still pondering where to tie in the AC power source so we discussed some alternatives.  He had also put the red covers on the bulbs in his new VDO speedometer so I got to see that.  Ours are white for now but most of the dash lighting is green.  The red makes the speedo stand out, but if I change ours from white it will likely be to green.  Chuck had a supply of spare 12VDC, 1.2W “grain of wheat” light bulbs that are used in our illuminated switches and let me have four.  Our Aqua-Hot switch does not currently light up when it is turned on.

After checking out his projects we went to the Panera at Grand River Avenue and Novi Road for lunch.  We had a good chat and solved all of the world’s problems so he went back to the shop to find some new ones and I went home to take care of chores.  I continued doing laundry and worked on the SLAARC WordPress website setting up user accounts for several new club members.

Linda got home around 5:30 PM and got busy making dinner.  She started with a nice salad featuring a ginger dressing.  Dinner was 45 minutes later; a baked potato with Brussels sprouts on the side, a glass of Leelanau Cellars Winter White with Peach wine, and grapes for dessert.  She worked on something for Butch while the potatoes baked and I worked on e-mail.

We were both tired after dinner but took some time to sort and fold the laundry from which I selected and packed the clothes I will need for the next 10 days.  We were tired and turned in after that.  I had received an e-mail from Butch with seven photos attached of the place we are considering staying in Quartzite, AZ.  It took us a while, but we eventually matched them up with the correct lot on the Google Maps satellite view.  It is not the corner lot as Butch and I previously thought, but the 3rd lot north of Kenoyer on the east side of N Lollipop Lane.  With that issue resolved we turned out the lights and went to sleep.

2014/10/14 (T) A Crowning Achievement

Linda was up at 5:15 AM again and out the door on the way to the bakery at 5:45 AM.  At this hour of the morning she has clear sailing all the way to Hamtramck which is much less stressful than the parking lot that develops on I-96 inbound just a short time later.  I was up at 7:15 AM, showered, and started gathering and organizing all of the stuff that I had to load into the car for the trip back to Indiana.

Keith showed up at 9 AM to cut the grass as I was loading my car.  He was rained out yesterday and today was not looking too good either but he figured he would have a go at it.  I wrote out his check and paid him in advance as I would be gone long before he finished.  I had time for a cup of green tea and pulled out of my driveway at 9:30 AM.

My first destination was Gusfa Dental in Dearborn, Michigan where I had an 11 AM appointment.  Dr. Steve and his assistant, Margaret, installed my new permanent ceramic crown on the upper right tooth that had a root canal procedure in mid-September.  The crown fit almost perfectly and only required a little modification on the surfaces that abut the two teeth immediately adjacent.  The bite was just right.  Gusfa Dental is definitely not the cheapest clinic around, but the work is top notch and they have been our dentists for almost 40 years.

I was done and out the door at 11:20 AM and headed directly for Twelve Mile, Indiana.  The drive was wet but uneventful.  Given my starting point in Dearborn I changed my route yet again, this time taking I-94 west to M-60 southwest to I-69 south to the I-80/90 Indiana Toll Road west to exit 92 at SR-19 (IN) in Elkhart.  From there I headed south on SR-19 and wound my way slowly through Elkhart until I picked up US-20 westbound on the south side of Elkhart.  From US-20 I picked up US-31 south and exited at IN-25 south of Rochester, Indiana where I bought some groceries at the Kroger store.  I texted Linda and then called Butch.  As I was getting ready to head south on IN-25 I got a call from Michele Henry of Phoenix Paint with some questions about the Zip Dee awnings we had installed on our coach after she finished painting it.  I took IN-25 as far south as Fulton and turned east onto a small farm road that took me to Meridian then south to SR-16 and east to Twelve Mile.

While driving down Meridian I saw one of the most intense and perfect rainbows I have ever experienced.  It was deeply colored, very clear, and an entire semicircle was visible.  A second rainbow, fainter and partial, formed above the first one on the right (south) end.  The sky was very dark to the east with bright, low sun from the west.  The trees were blazing with color, intensified by the rains, and white farm houses glistened as if they had just been freshly painted.  It was spectacular but I was not able to get a photo of it.  I arrived in Twelve Mile at 5 PM and immediately unloaded and stored my groceries.  I then brought my clothes and technology items into the house and put them in the guest bedroom where I stay when I am here.

Butch needed some parts for various bus projects so I drove us to Home Depot in Logansport.  One the drive in he got a call from his brother Tom.  He had a problem with his air compressor and wanted Butch to look at it so we went there after our stop at Home Depot, with a stop at the local Mobil station so I could fill the fuel tank in my car.  Butch quickly made a tentative diagnosis of the compressor problem as the starting capacitor and/or switch.  Tom and Butch did some pondering about details of Tom’s project in which he is converting the front half of a Crosley sedan into a trailer.

We visited for a while back at the house and looked up the grain of wheat bulb I needed for the illuminated switches in the H3-40.  Napa Auto Parts shows it in their automotive lighting catalog as a #37, 12 VDC, 1.26 W, wedge based.  Butch looked online and found a place (Bulbtown) that sells them for $0.42 each.  Orders over $50 get free shipping and handling so we discussed doing a bulb inventory of each bus and then pooling our orders.

I spent a few minutes showing Butch how the photos that Joe sent of the lot in Quartzite matched up with the Google Maps/Earth satellite and Streetview images.  By the time we were done with that it was late and we all turned in for the night.

2014/10/15 (W) MC-9 AC Wiring

Cockpit house systems switch panel.

Cockpit house systems switch panel.

Butch bought a brass nipple (NPT) last night to thread into the fitting on his fresh water tank but the fit was still too loose.  He needed the nipple in order to put the fresh water tank back in the bus.  Between that and the really soupy 54 degree F weather it was obvious that today was not going to be an outside work day.  I suggested that we work on the AC wiring on their bus instead—a nice inside project—after breakfast.

House electrical closet in Butch & Fonda's MC-9 before rewiring.

House electrical closet in Butch & Fonda’s MC-9 before rewiring.

I had homemade granola with fresh blueberries and soy milk, a glass of orange juice, and two cups of Seattle Blend 1/2 decaf coffee.  While the coffee was brewing I unscrewed the switch panel with the Aqua-Hot switch and replaced the “grain of wheat” bulbs in the Aqua-Hot switch and the Engine Preheat switch.  We then got to work on the AC (house) wiring for their bus conversion.

New 20-slot AC panel for inverter circuits.

New 20-slot AC panel for inverter circuits.

The bus had three small main lug load centers, with six circuit breakers each, mounted in a future closet in the bedroom.  We ran an extension cord through the passenger side rear slider window to power a work light, disconnected the shoreline, and switched off the inverter.  I then removed the three panels one at a time, labeling each cable as I pulled it out.  With all of the old panels out we mounted the new 20-position panel box for use with the inverter circuit.  I spent the rest of the work day, except for a lunch break, pulling old and new electrical cable into the new box and making the connections to the ground bar, neutral bus, and the GFCI circuit breakers for all of the circuits that will be fed by the inverter.  We tied in the main AC power to the inverter AC input and checked that all of the circuits worked as planned, which they did.  I will mount two of the smaller boxes tomorrow and pull the cables for the shorepower/generator only circuits into those boxes.

We quit working for the day at 7:30 PM and I washed up before making my dinner.  I had a nice salad with “power greens” and various toppings and leftover Koshary.  Yum.  I drew a glass of Moscato, did the dishes, and went back to the house.  I had a text and an e-mail from Linda so I replied to those.  We were all tired and turned in a little after 9 PM.