Category Archives: WFPB

Posts related to our Whole-Foods Plant-Based approach to healthy eating. We became vegetarians in 2000 and transitioned to being vegans in 2011. We discovered the WFPB concept in 2012.

2015/07/29 (W) Drive Shaft

Leave a reply

I had had a 9:30 AM appointment at Brighton Honda to have a drive shaft replaced and suggested that we just continue on to the Brighton Panera a half mile down the road for bagels and coffee.  Linda never refuses to go to Panera so that is what we did.  The Wi-Fi was out of service but we both bought things to read so we did not care.  We sat in the two comfy armchairs by the fireplace, which was turned on, because the temperature inside was very cool, a frequent problem with this particular Panera store.  We each had a bagel and many refills of our coffee cups and stayed long enough that Brighton Honda called to let me know my car was ready to be picked up.  We left at 12:30 PM and Linda dropped me off to retrieve the ca.

Back home we had the leftover couscous with caramelized onions and the rest of the kiwis for lunch.  Linda finalized her grocery list and headed off in search of food.  I spent the rest of the day and most of the evening working on the design/drawings for the built-in sofa.

Through the course of the day I had QSOs with Jim (N8KUE) on the Novi 440 repeater and with Chris (K8VJ), Steve (N8AR), and Mike (W8XH) on the South Lyon 2m repeater. I also installed an updated driver for the NVIDIA GPU in my ASUS laptop, installed updates on the older Sony VAIO workstation (which still has Windows XP Pro), installed updates on the Linux box, and took time out for dinner (a delicious red lentil potato curry) and dessert (very sweet watermelon).

I went back to work in my office and sent an e-mail to Mike (W8XH) concerning Windows 10.  He replied via the South Lyon 2m repeater.  We had a long chat from 10:10 PM to just after 11 PM that was joined briefly by Steve (N8AR).  There was also a group QSO taking place on the Novi 440 repeater that I listened to in the background.  After I turned the radio off and came upstairs Linda said it appeared that my ham radio transmissions were interfering with our OTA TV signals.  The antennas are on the same tower but the OTA TV antenna is mounted below the Diamond X-50N 2m/70cm vertical ham antenna so I was a little surprised that it would be causing interference.  The vertical antenna has an omnidirectional radiation pattern which resembles a donut sitting on a horizontal surface, so the location directly under the base of the antenna should be a region with very little signal.  Apparently that is not the case and I will eventually have to do something to remedy the situation.  For now, however, the solution will be to not use the radio when someone s watching television.

 

2015/07/26 (N) Rearranging

Leave a reply

I was up at 8 AM but did not make coffee as Linda was still asleep and the grinder is fairly noisy.  I put the last load of laundry in the washing machine, cleaned the litter tray (which we keep in the downstairs shower), and then worked in my office.  Jasper (the cat) came down to assist me but mostly ended up supervising.

All three monitors mounted in the ham shack using the ZioTek wall-mounted track system. The Dell is in the middle. There is a mount and room for one more monitor at the right end.

All three monitors mounted in the ham shack using the ZioTek wall-mounted track system. The Dell is in the middle. There is a mount and room for one more monitor at the right end.

I mounted the fourth (last) arm on the wall-mounted rail in our ham shack.  I swung it back against the wall to get it out of the way as I do not have a monitor that I want to install at that position at the moment.  I cleaned up the tools and staged them by the stairs and then moved the coiled coax out of the way and cleared a few things off of the desks so I could move the desks back into position.  I left them farther out from the wall than before so they were appropriately placed relative to the three wall-mounted monitors.  I then put various pieces of ham radio equipment back on the desks.

Monitors obviously need computers.  I removed the Dell Precision laptop from my computer desks, removed the computer from the combination docking station and monitor stand, cleaned all of the pieces, and reassembled it.  I set it at the left edge of the ham desks, slid it under the left monitor, and placed our old Icom IC-706 HF transceiver on the monitor platform, just for appearance sake.  We are not using thus radio at the moment but it fit nicely in that spot.

I placed the GoBox with the Icom IC-7000 HF/VHF/UHF transceiver and 12VDC power supply at the right edge of the desks, put the MFJ-998 Intelli-Tuner to its left (under the right monitor), and put the larger variable voltage DC power supply on top of it.  The time we spent yesterday determining where to mount the rail on the wall was time well spent.  The monitors are at a comfortable height for viewing when seated at the desk, tilted down slightly to avoid glare from the overhead down lights, and the bottom edges are high enough above the desk to permit sizeable equipment to slide under them.  The desks are also far enough out from the wall to make it easy to attach and manage cables.

I rearranged my primary ASUS laptop on my computer desks and checked my e-mail accounts.  I have had a discussion going on this past week with Gary at Bus Conversion Magazine about hats with the BCM logo and responded to a couple more of those communiques.  Around 10:15 AM I heard footsteps and knew that Linda was finally up so I wrapped up the work in my office, transferred the laundry to the dryer, and went upstairs.

Linda was working at her desk and was not hungry but wanted coffee.  She did not sleep well last night so I made a pot of Sumatra Manhelding which is NOT one of our half decaffeinated blends.  I got myself a bowl of granola and had a large glass of orange juice.  We spent the rest of the morning in the living room reading, writing, and menu planning.

The dinette area of our bus with the two fan-coil heat exchangers on the floor. They will go in the bases of the desk when it is installed in this corner.

The dinette area of our bus with the two fan-coil heat exchangers on the floor. They will go in the bases of the desk when it is installed in this corner.

I like to hear the grandfather clock strike 12.   Besides the charming Westminster chimes, it serves to announce that the part of the day has arrived where I am supposed to get some of the physical work on my to-do list accomplished.  Today, however, my #1 priority was to redesign the pull-out pantry so I limited my physical work to gathering up my tools from the basement and moving them to the garage, moving the bus back to its normal parking spot, and taking photos of cabinet details in the bus for Jarel.  I mixed in a little e-mail, a few computer updates, some ham radio, and time for meals, but basically I worked at my drafting board most of the day and evening.

For dinner Linda made a very tasty dish that we had not had before.  The base ingredient was rice and she used basmati even though the recipe called for brown.  I prefer basmati rice to brown rice so it was a good substitution as far as I was concerned.  The other ingredients were garlic, power greens, mushrooms, and blanched fresh green beans.  She sliced and caramelized a large onion and used it as a topping.  This was essentially a “1-pot” dish in that all of the ingredients ended up combined prior to serving.  Linda makes a lot of dishes like this and we both like them. This particular dish had the crunch of the green beans, the chewiness of the rice, and the soft earthy character of the mushrooms held together by the garlic and olive oil and topped with sweet earthiness of the caramelized onions.

At 8 PM local (EDT) I participated in the weekly SLAARC Info Net for the first time in a couple of years and did so from the comfort of our ham shack.  It was a pleasure using our new Yaesu FTM-400DR/DE dual band transceiver with our Diamond X-50N 2m/70cm antenna at a height of 40 feet and connected by good coaxial cables all the way through.  Club president Harvey (AC8NO) served as net control operator and did a nice job.

After the net wrapped up at 8:45 PM Steve (N8AR), Andy (N8DEV), and I chatted for another 20 minutes trying to find some rhyme or reason why our Yaesu FTM-400’s are experiencing random audio dropouts.  We did not get it figured out and wrapped up our QSO so Steve and I could check into the LARK (Livingston Amateur Radio Klub) net that started at 9 PM (EDT).  This was the first time I had checked in to this particular net even though LARK is based in Howell and the repeater is closer to us than the ones in South Lyon or Novi.

The LARK Net was much briefer than the SLAARC net and concluded at 9:16 EDT.  Steve and I went back to the South Lyon repeater where Paul (N8BHT) heard us and joined the conversation.  When we finally wrapped up our testing QSO I went back to work on my pull-out pantry drawings.  I was about to shut everything down at 10:45 PM EDT when Mike (W8XH) announced his presence on the South Lyon repeater.  He was mobile but full-quieting and I did not experience any dropouts during our 25 minute QSO.  I took a few minutes to e-mail Jarel and then called it a night.  I had a few almonds as a snack, got ready for bed, and worked on this bog post for a while.

 

2015/07/24 (F) Open and Shut

Leave a reply

I was up at 7:30 AM and made coffee but I did not see Mara or Linda until after 9 AM.  Around 9 AM I heard a knock at the front library doorwalls and heard someone saying “hello?,  hello?, David?”  I went out the front door and saw the front end of a red Ford Focus parked in front of our bus.  I had never met this guy but he was not unexpected and I knew he was looking for David LaVoisne, who lived here with his wife, Maria, until we bought the house from them in February 2013.  I knew this guy might stop by as he had once before when we were away and chatted briefly with our lawn care guy, Keith.  I also knew that he had worked with David at the Ford Wixom plant before they retired.

We introduced ourselves and had a nice chat.  I explained that David and Maria had sold the house and their Airstream motorhome, bought a newer motorhome, and were now full-time RVers.  (As I recall they bought a used Foretravel.)  Apparently they did not let all of their friends or former colleagues know what they were doing.  I also mentioned that they had moved the few possessions they did not get rid of to their son’s house somewhere in the region and that they probably visited there occasionally.

Mara emerged about the time our visitor left.  Unfortunately I do not recall his name.  We all had breakfast together after which Mara went about her final departure preparations.  She gave Linda a small fir tree and two small herbs.  Linda transferred the herbs to her herb pots and gave Mara’s small pots back.  She needed to top off her fresh water tank so I helped with that.  The lock on the water fill door stuck in the open position so Mara got her can of dry lube and I sprayed a little in the lock by holding the protective cover open with the tip of the key.  That did the trick, another quick fix to a small but potentially annoying problem.

When her rig was basically ready to go Mara made one last use of the shower, got dressed to travel, unplugged the power cord and stowed it away, and pulled in the slides.  After hugs all around she climbed into the pilot’s seat and fired up the engine and Sabra (one of her two cats) climbed up on the dash just in front of the steering wheel.  I guided her as she backed out onto our road.  She drove down to the court, did a three point turn, and a few minutes later drove past our house in the opposite direction, back on the road again after almost two weeks at our place.  It was noon, but she was only going as far as London, Ontario today.  Linda got a text message later letting us know that she had arrived at the Moose Lodge and the border crossing on the Blue Water Bridge from Port Huron, Michigan to Sarnia, Ontario had only taken 30 minutes.

After Mara was out of sight I gathered up the laundry, sorted it, and started a load of warm whites.  I wrote out a list of parts I needed to finish the garage door opener installation and the monitor mounting system in the ham shack and then drove to Lowe’s in Howell.

I was back home by 1:30 PM and we had hummus and chips along with black grapes for lunch.  We started working on the garage door opener installation when my phone signaled that I had a voice message.  It turned out that I had one on the house phone too.  Both messages were from Jarel.  He had a few questions about dimensions on one of desk drawings so I called him back and we sorted that out.  He retrieved the half sheet of walnut veneer plywood from Butch last night and bought 16 board feet of walnut.

In spite of the 85 degree temperature and what felt like high humidity, even though it was only 41%, we worked for about three hours and finished installing the opener on the small garage door.  It was quite an involved process but it worked when we were done.  The new opener has automatic reverse if it encounters an obstruction and an infrared sensor beam about 6″ off the floor.

At 5:30 PM we loaded the old garage door opener into the dump trailer.  We then loaded the old OTA TV antenna pieces.  Brad is picking up the trailer in the morning so we will not fill it but it we put the junk in it that we needed to get out of the garage and a few other things as well.

We took a break around 6 PM to have some water and get off our feet for a while.  At 6:45 PM Linda made salads and cooked up some vegan Italian sausages.  After dinner we planned to work for a while in the ham shack on the installation of the wall-mounted track system but we were too tired to start a project that was going to require decisions and careful attention to detail.  We sat in the living room instead and used our iPads for the usual things.  It was great having Mara here and we look forward to her return someday.  But for now she is off on the next leg of her open-ended adventure and we have a lot of work yet to do to get our bus ready for the 2015-16 winter season.

 

2015/07/23 (R) Wrapping Up Mara

Leave a reply

Mara’s plan was to make this the last full day of her visit.  Our day started without her as we had cinnamon raisin toast, juice, and coffee for breakfast.  I got a call from Jarel with clarifying questions and ideas about the desk and the pull-out pantry.  After a thorough discussion we had better ways to approach a few things.  He also had a better feeling for the estimated cost of the project and I agreed to send him 50% as a deposit.

I typed up a short letter and printed off the graph that Steve made of the return loss for the M-302N V/U lightning arrestor.  I packed the unit for shipping to Morgan Manufacturing and included the letter and graph.  Linda wrote out the check for Jarel and got it in an envelope to mail.  She then went to the library, Post Office, and Humane Society where she donated cat and dog paraphernalia that we had accumulated over the years.

While Linda was gone I worked in the bus for a while and Mara worked on travel preparations.  I started by removing the old 3/4″ plywood floor from the refrigerator alcove.  The original plywood bus floor appeared to mostly be in good condition but I will put a new secondary floor in the alcove to keep the refrigerator legs above the level of the new tile floor.  There are a LOT of wires running along the floor of the alcove at the back wall and I may fashion a cover for them and seal up the holes at either end.

I removed the AC dimmer for the living room lights and the DPDT momentary contact DC switch from the floor-mounted walnut box where they were installed.  The DC switch controlled the passenger side sofa footrest.  I had to remove the wires from both switches to get them out.  The AC dimmer was easy but the DC switch had four different color wires with spade connectors.  I made careful note of which terminal each color went to and then pulled the spade connectors off.  With the switches out I was able to remove the box and its mounting cleats from the floor and wall.  This area will be tiled and the box will not be reused.

Out of curiosity I tested the switch with an Ohm meter to see how the terminals were connected internally.  I also checked the wires with a DC volt meter to see how they were being used.  Two of the wires were +12VDC and DC ground and the other two went to a connector that was originally plugged into the footrest.  The switch applied 12VDC to the two load wires in one position and reversed the polarity in the other position, making the footrest go out or in respectively.

Last year I had removed two blank outlet covers on the walnut panel next to the co-pilot seat so I knew that these two switches were originally installed there and subsequently moved to the floor-mounted box.  I unscrewed the 1/4″ walnut veneered plywood panel from the wall to see what was behind it.  What I found was a LOT of wires and it was not a pretty sight.  I re-installed the two switches in their original locations and re-routed some other wires so they went up over the HVAC chase.

There was still a large bundle of wires running along the floor at the base of the HVAC chase that I needed to re-route but I decided not to mess with those today.  They are connected to four different switches and a doorbell and disconnecting everything was going to require careful attention to detail.  I pondered the refrigerator some more and decided there wasn’t anything else I could do with it for now and that I was done working in the bus for today.

There is too much to do at the moment to just sit around so I decided to install the new garage door opener for the small garage door.  New is relative; it has been sitting in the garage in its original packaging since we moved into the house, supplied by the previous owners.  The old one has not worked correctly since we moved in and the previous owners bought the new one but ran out of time to install it.  It turned out to be rather more complicated than I expected, with very comprehensive assembly and installation instructions.  It also turned out to be a two-person project so Linda worked on it with me.

We were working and Mara had started prepping dinner when a UPS truck showed up with four boxes.  The delivery included:  Mara’s refrigerator vent cover; the Cutco knives and scissors, and; the ZioTek track system for wall-mounting the monitors in the ham shack (2 boxes).  The vent cover was due for delivery today but the knives were not due until tomorrow, so we were really glad to see them as two of them were for Mara.  The monitor mounting system was also due for delivery today but I had temporarily forgotten about it.

The north wall of the ham shack/office. This is where the ZioTek wall-mounted monitor mounting system will go.

The north wall of the ham shack/office. This is where the ZioTek wall-mounted monitor mounting system will go.

Mara was understandably anxious to see if the vent cover fit her base properly.  It was a VentMate and appeared to be identical to the old one.  She climbed up the ladder on the back of her motorhome and I handed parts and tools up to her.  I then climbed up was well.  She removed the old cover and we set the new one in place.  It was a perfect fit!  We put a small amount of putty under each screw head and then ran them down snug and congratulated ourselves on another job completed and well done.

With Linda’s help we put Mara’s kayak back in its custom carrier which fits in the receiver on the back of her motorhome (she does not tow a car).  The carrier was built by a welding shop in Mesa, Arizona to Mara’s specifications and is made from 2″ square tubular steel and powder-coated black.  The carrier holds the kayak diagonally across the back of the motorhome from lower left (driver’s side) to upper right.  The nose of the kayak sits in a pocket near the driver side rear corner of the motorhome and the midpoint is nestled in a much larger cradle.  A strap runs from the nose pocket up to the midpoint on one side and across the kayak to the other side where it is attached to a ratchet and has a hook on the end.  With the hook engaged in a ring the strap is ratcheted tight and the kayak is secure for travel.  Mara runs an anti-theft cable through an eyelet near the nose and attaches a lock for safe keeping.  The tail sticks up higher than the top of the roof-mounted air-conditioner covers but does not extend beyond the passenger side wall.  The tip of the kayak is 13′ 2″ from the ground.

We made good progress on the garage door opener but had to stop at the point where we needed to attach the motor housing to the ceiling as I needed to get some parts (angle iron and lag screws) that did not come with the unit.  The front of the track was attached to the header above the door opening and we left the motor assembly resting on top of a 6 foot stepladder.

The pieces of the ZioTek monitor mounting system laid out on the floor of the ham shack/office.

The pieces of the ZioTek monitor mounting system laid out on the floor of the ham shack/office.

While Mara and Linda prepared dinner I unboxed all of the monitor mounting components.  I was curious to see the parts and wanted to make sure everything was there and undamaged, which was the case.

Dinner was Thai vegan spring rolls in rice flour wrappers.  The prep work was in the cutting of lots of veggies (carrots, zucchini, onions, red and yellow peppers, Chinese cabbage, and mushrooms).  Mara made two dipping sauces, one with ginger, hot peppers, and other things and one based on fish sauce (so we passed on that).  Linda selected our bottle of Malvasia Bianco wine from the Heart of the Desert winery in Alamogordo, NM.  It was white, which we thought would go well with the delicate spring rolls, but very sweet with a slightly thick mouthfeel, like a late harvest Riesling or a Sauternes.  Perhaps not the best choice, but we finished the whole bottle anyway.

We chatted for a while after dinner but like most of our evening meals dinner was a drawn out affair with lots of conversation.  Everyone was tired and the women turned in for the night.  I went to my office and answered e-mails from Gary at BCM that I had seen earlier in the day.  I then went to bed and tried to catch up on blog posts for the last few days but could not stay awake long enough to finish them.

 

2015/07/22 (W) Chucking Junk

Leave a reply

After our usual breakfast and coffee we sat for a while in the living room.  This is part of our morning routine and I often use the time to finish up my blog post from the previous day but the last couple of weeks we have been busy and I have not always had time.  We enjoyed the time until about 9 AM and then got serious about loading our “junk” into the Chuck It Junk Removal dump trailer.

Our bus refrigerator with the doors off in preparation for removing it from the coach.

Our bus refrigerator with the doors off in preparation for removing it from the coach.

Mara checked with Cummins Bridgeway and they told her to bring her motorhome in at 11 AM so she broke camp at 10 AM and backed out of the driveway at 10:15 AM.  Cummins Bridgeway put several technicians and mechanics to work on her rig to re-install the genset, install new shock absorbers, and service the transmission (filter and fluid).  She was out in a few hours and stopped at General RV to return the Camco refrigerator vent cover which did not fit her base on the roof.

The Chuck It Junk Removal dumpster trailer with some of our stuff in it.

The Chuck It Junk Removal dumpster trailer with some of our stuff in it.

We took a break from chucking junk and extracted the old refrigerator from its alcove in the bus, which was a 2-person job.  I got some scraps of 1/2″ plywood to set in front of the elevated alcove base as I did not want to walk or slide the unit across the bus sub-floor, especially with the residual thinset mortar.  First we had to walk it out a few inches which was hard because it only had 3/8″ clearance on each side.  Once it was out far enough we were able to open the doors enough to remove all of the shelves and bins, which Linda took into the house and garage.  I then disconnected the water and electric that ran up into the left (freezer) door at the bottom hinge corner for the ice/water dispenser and light.  With those disconnected and pulled out of the bottom of the case we unscrewed the bottom and top hinges and removed the two doors.  Linda collected all of the small loose parts as we went and put them in a plastic container as we knew we would have to reassemble the unit at some point.

The doors had 1/4″ walnut veneer plywood face panels and we wanted to salvage those to use with the new pull-out pantry.  Normally you just remove the handle trim from the edge of the door and slide the panel out.  The fridge door panel would not budge so we removed the trim from all four edges of the door.  The panel had been stuck in place with strips of double-sided tape so we carefully peeled it loose.  The freezer door had two smaller panels, above and below the ice/water dispenser, and they slide out easily after removing the handle trim.  We carried the doors, trim, and panels to the garage and then walked the case completely out of the alcove.

The shelf I built for one of the storage bays on Mara's Fleetwood Bounder.

The shelf I built for one of the storage bays on Mara’s Fleetwood Bounder.

I spent some time pondering what would be required to disassemble the refrigerator enough to get it out through the door of the bus but decided not to do anything until I had talked to Butch.  Just before dinner I had a long chat with Chuck about the refrigerator swap and he reminded me that DTE Energy (the electric power utility for this region) will pick up old refrigerators and freezers and pay you $50 for them.  Linda checked this out online and learned that they have to be plugged in and operating or they won’t take them, so we have a double incentive for getting it out in one, operating piece.

Our revised plan is still to get the case out in one functioning piece through the side window frame but it won’t be this weekend.  The guy with the sunroom business in the building in front of Chuck’s shop is still in the process of moving to his new place and has trucks, cars, people, and junk all over the place making ingress/egress to Chuck’s shop difficult to impossible.  The business is supposed to be gone by the end of the month so we will wait another week and plan for Saturday August 1st assuming I can get the window frame open.  In the meantime I need to get back to work on the bus floor, so I will have to spend part of next week sanding and start installing the 1/4″ underlayment for the new vinyl tile.

Mara in our home kitchen with her wonderful pizza. This thing was truly good eats.

Mara in our home kitchen with her wonderful pizza. This thing was truly good eats.

Mara and Linda made another pizza for dinner and it was every bit as good as the first one.  Mara has been a wonderful house guest.  We have left the house open to her and she has made herself comfortable in the kitchen and using the hall bathroom and laundry.  It helps that Linda is not possessive about the kitchen.  Whenever we have visitors who want to help in the kitchen Linda welcomes their participation.  It’s been fun for both of them and they have each learned a few knew things and deepened their friendship.

 

 

2015/07/20 (M) Chuck It

Leave a reply

Our morning got busy right away.  We had breakfast and I made coffee while Linda entertained Madeline.  Brad, from Chuck It Junk Removal, dropped off the dumpster trailer at 9 AM.  Keith, from Kish Lawn Care, showed up at 9:30 to cut the grass.  Linda took Madeline to the Mill Pond to use the playscape and Mara started scrapping old caulk and putty from around the base of her refrigerator roof vent.  I tried using another set of tools for removing the stripped screw in the stop block on the bus to no avail.  I even managed to break off two drill bits in the hole I was drilling in the screw.  The more I work on this the worse it gets.

When Linda and Madeline got back Madeline had lunch and then laid down for her nap.  The three adults then had vegan hotdogs for lunch after which I put the finishing touches on my design drawings for the pull-out pantry.  Mara and I then went on an errand run.

Our first stop was the FedEx store in Novi where I made copies of all of the drawings for the desk and the pullout pantry.  We then stopped at General RV to return the refrigerator vent cover as it did not fit the base section on Mara’s roof.  They had a Camco cover that claimed it would work, and looked like it might fit, so she exchanged them and got a small credit.  When we got back at 3:15 PM Brendan and Shawna were already there.  They got Madeline up at 3:20 PM and stayed until about 4 PM.  After they left I got up on Mara’s roof to help with tasks there.

First we checked the refrigerator vent cover.  The mounting holes lined up but the flanges (shields) on the long sides were not wide enough to fit outside the base flanges.  The proper fit requires the upper flanges to be outside the lower flanges by at least 1/4″ so heat can escape and extend below the lower flanges to keep rain from getting into the refrigerator cavity.  I was going to install the 24″ x 24″ piece of thin sheet steel for the magnetic cell phone booster antenna when I discovered that the antenna would stick to the old satellite dish.  We experimented some more with the location of the inside antenna but could not improve on yesterday’s placement.  The performance was as good as with the metal sheet so I decided not to install the metal sheet.  Mara then caulked around the refrigerator vent base and touched up a few other spots around tank vent caps.

Linda grilled a variety of veggies for dinner.  I opened a bottle of Pinot Noir wine and we ate outside.  It was cloudy and 76 degrees F with light winds; very pleasant and bug free.  We had fresh strawberries with the meal and dark chocolate for dessert.  We eventually moved inside to chat but did not stay up late as I needed to be up early in the morning and on my way to Indiana.

 

2015/07/19 (N) Another Buddy Visit

Leave a reply

Linda was up at 6:30 AM to get showered before Madeline woke up at 7 AM.  Once Madeline was up they got busy right away making vegan blueberry pancakes.  I was up at 7:20 AM, got a quick shower, and was dressed and seated at the table just in time for breakfast.  The pancakes cooked especially well this morning although I would like to try them sometime without the blueberries cooked in.  After we were done eating I made coffee while Linda and Madeline prepared vegan sloppy Joe’s in the crock pot for lunch.

Mara has been getting up when she feels like it and eating breakfast by herself.  By 9 AM she was outside emptying the passenger side storage bays on her motorhome.  She spent the rest of the morning going through the stuff she had removed, deciding what to keep, organizing it, and putting it back.  I gathered up our laundry, sorted it, and started a load.

Aunt Meghan (our daughter) and Uncle Chris (her husband) arrived at 10 AM and I brewed another pot of coffee.  This was the second buddy visit of Madeline’s stay (the first was Cousin Katie on Friday).  Meghan provided a lot of child care during Madeline’s first 18 months and Madeline adores her “buddy.”  She took Meghan on a tour of the house showing her where various things, like snacks and kitty cats, were to be found.  It was a sure sign that Madeline is finally feeling very comfortable at our house.

Having other adults around gave Linda a break and some time to finish preparing lunch, although once Madeline realized Grandma Linda was at work in the kitchen she had to help.  I went out around 11:45 AM to fetch Mara.  We all sat down at noon and enjoyed a simple but delicious meal of vegan sloppy Joe’s (based on textured vegetable protein aka TVP), corn on the cob, raw baby carrots, and black grapes.

Madeline had very busy days yesterday and the day before and got up a little tired this morning so by 1 PM she was more than ready for her nap.  Meghan and Chris had things to do and took their leave.  Mara went back to work on her rig and Linda laid down for a nap.  I tended to the laundry and then went out to work on our bus and Mara’s motorhome.

I used the Speedout set to try and remove the screw with the stripped head from the stop block on the passenger side fixed glass frame.  I was not successful with this tool so I switched gears and worked on Mara’s cell phone booster system.  I climbed on the roof and she handed me the 12″ x 18″ thin galvanized sheet steel plate.  I took it to the front of the roof, set it down on the fore-aft centerline, and positioned the 4″ magnetic mount antenna in the center.  I dropped the coax over the edge by the driver’s side window and climbed back down from the roof.

Mara opened the sliding side window and screen by the driver’s seat and I passed the coax in to her.  Inside the rig we positioned the amplifier on the driver’s seat and started experimenting with various positions for the inside antenna.  We found one that worked well and left it for her to try.  I checked the laundry and then laid down for a nap.

I skipped dinner as I had a SLAARC meeting at 6:30 and had to leave before 6 PM which is when Madeline was having her evening meal.  Our ham radio club meetings start with social time from 6:30 to 7:00 PM.  The meeting was called to order at 7 PM by president Harvey (AC8NO) and I agreed to act as recording secretary.  Linda was not able to attend because she was taking care of Madeline so I gave the treasurer’s report in her absence.  The meeting adjourned at 7:10 PM.  We reconfigured the room for the program which was a presentation and debrief of our recent field day activity.  Larry (K8UT) reported on the N1MM Logger Plus networked computer logging software.  Steve (N8AR) reported on the radios and antennas and conducted the debriefing.

I got back home before 9 PM.  Madeline was asleep and the ladies were each enjoying a glass of Pinot Grigio on the back deck.  I poured one for myself and joined them.  The mosquitoes eventually appeared and we retreated indoors.  I reheated the bowtie pasta from the other night and finished it for dinner.  We said “good night” at 10 PM after which I checked e-mail and websites and then headed to bed.  I wrote for a while before turning out the lights.

 

2015/07/18 (S) RV Shopping

Leave a reply

Madeline was awake at 7 AM and Linda got her up shortly after that.  I slept in until 8 AM.  They had already eaten breakfast by then so I made coffee and had cinnamon raisin toast.  Metropolitan Baking Company makes a very tasty cinnamon raisin bread.  We all sat in the living room while Madeline played with various toys and I worked on finishing yesterday’s blog post.

Linda and Madeline left at 10 AM for the Howell Library.  The plan was to let Madeline play in the children’s area, which has a lot interesting things to do for children her age.  After selecting some books and DVDs to bring home they were headed to Meijer’s to do some grocery shopping.

I continued working on my iPad until Mara came in the house.  We had a chat about blogging and I showed her the Feedly app on my iPad.  She has attended workshops put on by The Geeks On Tour and has their training materials.  I think Blogger is probably the right tool for her and Picasa is probably the right way to manage her photos.  They are both Google products so they work well together and they are free to use.  There are downsides to that, especially for professionals, but for most people it’s a great solution.

Mara and I left around 11:45 AM and drove to General RV in Wixom.  This was my first visit to their new facility and it is nice.  The parts department is larger and better stocked than the old one and is bright with natural light from large south and west facing windows.  We were asked several times if we needed assistance but we were never pestered.  They did not have any of the white Dicor self-leveling caulk we were looking for but one of the employees checked their stock and brought out six tubes.  Mara bought four of them along with a new Norcold refrigerator roof vent cover, a small roll of Eternabond tape, and some concentrated RV wash/wax.  I picked up eight brown circular adjustable air vents for the bus.  The ones in there now are black but I think the brown will look better with the new floor tile.  We won’t really know, however, until we install them.

We drove to Lowe’s in Howell where I bought two pieces of 12″ x 18″ thin galvanized steel plate and three rolls of 3M double-sided tape suitable for outdoor use.  The plan is to put one of these on the roof of Mara’s motorhome and possibly put the other on the roof of our bus to allow the use of the magnetic base cell phone antennas that came as part of the weBoost Drive 4G-X cellular booster systems.  Once the steel sheets are affixed to the roof I will caulk around them.  First, however, I will just set the sheets up there and see what sort of difference the system makes.

We stopped at O’Reilly’s auto parts store and Mara bought some 10, 15, and 20 Amp mini fuses.  These fuses have a small LED that glows if the fuse opens.  They were more expensive than the regular ones, but that is a very handy feature and I may stock up on these the next time I need to buy fuses.

Back at the house Linda informed me that when the storm blew in it pulled the sun umbrella out of the table on the deck.  We put the glass top back in the table and re-installed the umbrella.  This has happened a couple of times and we have been lucky that the glass top has not broken.  Mara returned to her rig.  She had left her patio awning out but it was not damaged.

Linda got Madeline up from her nap at 3 PM and read her a story about flying in an airplane.  Madeline then played with her toys for a while.  Around 4 PM Madeline wanted to bake a cake.  Linda was planning on this anyway but it was nice that it was Madeline’s idea.  They got busy in the kitchen and I sneaked off to my office for a while.

Madeline had dinner at 6 PM so I came up from my office while she ate.  Meals are a social time and I was ready for a break anyway.  After dinner Linda helped Madeline get cleaned up.  I slipped back down to my office while they watched an Elmo DVD, but by 7 PM I was done working on the pantry design for the evening and went back upstairs.  Linda was reading the airplane ride book (again), after which Madeline played (with) the organ after which they drew for a while and then played with the Play-Doh.  Madeline is a busy girl.

I was just getting ready to go ask Mara what temperature to preheat the oven when she came to the house with an armful of ingredients for the pizza.  She has a recipe for a wheat-free (gluten-free) pizza dough that she wanted us to try.  It calls for cheese and eggs so to make it vegan Linda had her buy Daiya mozzarella shreds and gave her egg replacer to use.  The other ingredients include almond meal, chickpea flour, golden flaxseed, onion powder, garlic powder, sea salt, olive oil (EVVO), and water.

It took another 25 minutes to get Madeline to bed but once Linda had her tucked in I opened a bottle of Nebiola wine from the St. Clair Winery in Deming, New Mexico.  I often write that I am not a fan of red wines and continue to not like dry wines with lots of tannins.  The Nebbiolo, however, is one of the nicest wines I think I have ever tried.  That probably means it is too sweet for most red wine drinkers, but I did not find it to be sweet; I found it to be smooth and complex.

We ordered a couple of things from Amazon on Wednesday and they showed up yesterday.  When I unboxed the Notier capacitive touch screen precision stylus I was surprised by what I found.  It’s a 2-part housing that unscrews and the cover screws onto the other end of the bottom part, which is needed for comfort and balance.  The stylus tip is small but has a 1/4 in clear plastic disc on the end.  It was on sale for $11 and I decided right away I would not return it.  Besides, I had not actually tried it yet.  So I finally tried it while the pizza was cooking.  It is an amazing little device!  It is, indeed, very precise and works with a delicate touch so I will have to re-calibrate my “typing” style, but it just goes to show that you never know until you try.

I lost track of time but it was somewhere between 9:30 and 10 PM when the pizza was ready to eat.  It was, however, worth the wait and might be the best vegan pizza I have ever had.  The recipe is definitely a keeper.  We each had a chocolate cupcake (with sprinkles) while we finished our wine.  We then adjourned to the living room and talked until almost 11 PM.  It was a very full day for all four of us and everyone was tired but satisfied.  It’s nice having family and friends here.

 

2015/07/16 (R) RV Work

Leave a reply

We were up at 6 AM and by 6:25 Mara had started the engine of her motorhome to pull in the slides.  She disconnected the electrical cord and we helped her back out of the driveway at 6:40.  She was pointed west so she had to drive to the end of our street and use the circle to turn around.  Her destination was Cummins Bridgeway in New Hudson.  When she made the appointment they said the closer to 7 AM she could arrive the better.  They estimated she would be there 3 to 4 hours.

Mara's Fleetwood Bounder parked in our pull-thru driveway.

Mara’s Fleetwood Bounder parked in our pull-thru driveway.  Linda in green jacket, Mara in red.

Linda did not sleep well last night, a common side effect of eating too much too late in the evening, and went back to bed once Mara was safely on her way.  I decided to stay up and clean the coffee maker before making coffee.

I wiped out the upper housing and cleaned the nooks and crannies with Q-tips.  The upper housing is undoubtedly designed the way it is to make it structurally adequate with a minimum of plastic but it was equally obviously not designed with any consideration for being able to clean it.  Like many things, it leaves me wondering if the designers ever use the products they design or what sort of functional specifications they work from and who develops those.  I think the Bauhaus had it right when they declared “form follows function.”  My guess is that commercial equipment, while less “stylish” than consumer goods, has cleanability and serviceability as primary design considerations.

I remembered that we had a one gallon jug of distilled white vinegar in the bus so I got that and ran eight cups of it through the coffee maker.  I added four cups of water to the used vinegar and ran it through again.  I then ran 12 cups of RO water through the coffee maker.  By the time I was done it was approaching 8 AM so I ground up some of the Sumatra Mandheling beans (not decaffeinated) and made seven cups of coffee.  I normally make 8 – 9 cups but this was full-strength stuff.  I’ve been making 11 cups while Mara is here but it turns out that she does not drink much coffee so I will be back to my usual 8 – 9 half-caff servings going forward.

I enjoyed my first cup of coffee while finishing yesterday’s blog post and starting this one.  I enjoyed my second cup while researching hardware for mounting a small table to a wall so that it is essentially cantilevered, which is the table arrangement we need for the bus.  I found a 2-piece aluminum extrusion that might be the solution for attaching the table to the wall.  It is 30″ long and can be cut to length but I do not think it will not be strong enough by itself to support the table.  I found an angle bracket on Rockler that might be the additional piece I need.  It is 12″ x 18″ with a notched corner, made of 1/8″ steel, and powder-coated black.  A pair of them will support 1,000 pounds so one in the center would be more than sufficient.  An alternative would be a wood strut angling back to the wall but we are not willing to have a vertical table leg.  I have not decided whether the table should be removable but I am leaning towards a more permanent installation.

Linda eventually got up but neither of us were hungry so we did not have breakfast.  I went to my office and ordered the ZioTek monitor mounting system from CyberGuys.  I then e-mailed Ewa at AFC Industries and thanked her for the second quote but let her know that the price was way out of my budget.  I finally settled in to work on the custom desk design for the bus and eventually finished it (I think).  Linda left around 12:30 PM for her dermatology appointment.

Now that we have base station antennas cabled to the ham shack I tend to have the new Yaesu FTM-400DR/DE dual band (VHF/UHF) radio on whenever I am working in my office.  It provides a pleasant diversion from my other tasks and is actually useful.  Somewhere mixed in with everything else were a couple of QSOs with ham buddies and an attempt to coordinate with Steve (N8AR) and Mike (W8XH) about testing my two Morgan lightning arrestors at Steve’s QTH.

This toad was sitting on a rock by our front porch.

This toad was sitting on a rock by our front porch.

Our bus had settled in the rear and was clearly out of level.  The reason it had settled was that I forgot to switch the suspension system to Level Low and shut off the air to the engine accessories.  It was of no consequence but it bugged me so I started it, let it air up, re-leveled it, shut it down, and switched off the batteries and engine air accessories.

Mara returned from Cummins Bridgeway around 1 PM and I guided her back into her parking spot.  They did the routine service on her motorhome engine and generator but found several things on the genset that needed to be repaired.  She agreed to have the work done so they removed the genset from her rig and will reinstall it next Wednesday.  They also inspected the motorhome and gave her a list of other things that needed to be fixed, some right away and some eventually.  She did not have them do any of that work as she wanted me to look at the list first.  The added service work means Mara will be visiting with us for at least another week, which pleased us greatly.

I went over the list with her and we discussed the relative importance and urgency of each repair.  One of the items involved the caulking on the roof so we both climbed up there to have a look.  I also wanted to scope out how we might install her weBoost Drive 4G-X cellular booster system.  While we were on the roof I was able to rock the rig side-to-side quite a bit just by shifting my weight.  One of the other items on the diagnostic list was shock absorbers and I indicated that I thought that sounded appropriate, especially given that the back ones reportedly had cracked/broken mounts.  They also noted that the transmission fluid was low and that the filter and fluid should be replaced.  I encouraged her to have these taken care before she left as Cummins Bridgeway is a very good service facility.

The other items were things that could wait but the caulking of the roof was something Mara could do herself.  She likes to take care of as much of her rig as possible and she will be here through at least Wednesday, so she has time.

Linda got back from her out-patient surgical appointment with bandages in seven different places.  We visited for a while and then I left the ladies and returned to my office.  I started on the design of the pull-out pantry for the bus and quickly realized that the very expensive Fulterer heavy-duty pull-out pantry slide I ordered from Rockler was too wide for the space we have available.  I came upstairs and groused about it for a while until Linda and Mara urged me to try canceling the order.  I called Rockler and spoke to someone in customer service.  I won’t know until tomorrow at the earliest, and probably not until Monday, if I was successful in intercepting the order before it shipped.  If not I will have to pay to ship it back and may have to pay a restocking fee.  Although I do not have anywhere else I can use it at the moment, between the restocking charge and the cost of shipping I may just keep it and find a use for it.

Linda made a large salad for dinner and we chatted during and after the meal.  It had been an early, long, hard day for all of us.  Mara returned to her rig before it was dark and Linda headed off to bed shortly thereafter with me not far behind.

 

2015/07/15 (W) Prime Wednesday

Leave a reply

It was brisk when we got up this morning, with the temperature in the upper 40’s (F), light breezes, lower humidity, and clear, blue skies.  When the weather in Michigan is at its best it is near perfect.

After our usual coffee and granola we spent a little time browsing Amazon.com looking at their “Prime Wednesday” sale.  Neither of us are compulsive shoppers or impulse buyers and scrolling through thousands of items on a slow Internet connection looking for something we can’t live without at a price we can’t pass up is not our idea of fun.  I have things I need to order, like the multiple monitor mounting system for the ham shack, but it quickly became obvious that I was not going to find those items for sale as part of Amazon’s special July 15 Prime Sale.

Mara was up and took her garbage to our trash to can and returned to her rig.  Linda then took our garbage out and moved the can to the street.  By 10:30 AM Mara had not yet emerged from her rig, so I went to my basement office and resumed work on the custom desk design for our bus.  I still need to design the pull-out pantry but I finally ordered the Fulterer top/bottom slide mount from Rockler and had it shipped directly to Jarel in Logansport, Indiana.  It is a serious piece of hardware that will support 450 pounds, so it should be more than adequate for the task.

Mara eventually emerged from her rig and the ladies left for 12 Oaks Mall and Mara’s first ever appointment with Renee in the J. C. Penney’s Salon.  They were gone quite a while, tacking on several stops at pet and food stores before returning home.

I received a second quote for a wall-mounted monitor mounting system from AFC Industries.  It included itemized pricing and an offer of a 15% discount but was still way too expensive.  Though more expensive than a desk-mounted pole system I decided I to order the ZioTek wall-mounted monitor mounting system from CyberGuys.  Being wall-mounted it will get my monitors completely off the desks, leaving room for ham radio equipment to slide underneath and all the way to the back edge of the desk (and beyond).  It will also isolate the monitors from the desk so they won’t move if the desks are bumped.  Another bonus is that I can move the desks to get to the cables at the back of the radios without having to move the monitors.

The monitor mounting system is a significant purchase so I wanted to make sure the components would work the way I need them to.  I measured the three monitors that will initially be mounted using the system and then made a scale drawing to see how they would fit.  I added all of the items to the shopping cart and was getting ready to complete the purchase when I noticed that a 5% discount was available if I joined their e-mail club.  I signed up, received an e-mail, and confirmed my intention to join but the 5% discount did not show up in my shopping cart.  I called the 800 number and was told it would take 24 hours for the discount to be available so I cleared all of the items out of the cart and will re-enter them tomorrow.

I finally settled in to my design work but took several breaks to talk to friends on the Novi and South Lyon repeaters.  The Morgan Manufacturing VHF/UHF lightning arrestor was once again degrading my signal to an unusable level/quality so I once again disconnected the antenna and radio coax and joined them together with an N-female to N-female barrel adapter.  Once I did that I was able to transmit and receive to/from both repeaters full-quieting.

I exchanged a couple of e-mail updates with Jarel Beatty, the cabinet maker in Logansport, and finally quit working around 5 PM.  I came upstairs and found that the weBoost cellular booster systems had arrived from Amazon so I unpacked the shipping box and opened them.  I had not realized when we ordered them that they were designed for use in a car with an inside antenna that requires the phone or other cellular device to be 18 – 36 inches away.  That is not very far and it is a fairly small range.  As the name implies, however, it is designed for use while in motion which is what both we and Mara need/want.  I decided to temporarily install one of them in Linda’s car to test it.

Sitting in the driveway in a relatively bad location my phone was in 3G mode with a weak, but usable, signal that hovered around -115 to -118 dBm.  With the booster turned on my phone switched to 4G-LTE and the signal strength improved to anywhere between -103 to -94 dBm.  (The less negative the signal strength in dBm the stronger the signal.)  That may not appear impressive on the surface, and it was certainly not the 50 dBm gain that is claimed for this device, but it was actually a significant improvement.

“dB” is the abbreviation for “decibels” which is a logarithmic scale.  Logarithmic scales are useful for representing quantities that vary over a large range, like cellular signal strengths.  A change of 3 dB represents a factor of two, i.e., a doubling or halving of the quantity.  Thus a change from -118 dBm to -115 dBm (decibels to a millivolt) represents a doubling of the received power.  It is still a weak signal, but it is twice as strong.  Going from -118 to -103 is a change of +15 dBm and is five doublings (-118 to -115 to -112 to -109 to -106 to -103) which is an increase of 2x2x2x2x2 = 32 times.  Continuing from -103 to -94 is another +9 dB change representing three more doublings (-103 to -100 to -97 to -94) for a total gain of 32x2x2x2 = 32×8 = 256 times.  Starting from a signal in the -118 to -127 dBm range that is potentially the difference between useable and not useable.  (BTW:  a change of 10 dB is a factor of 10, so going from -115 dBm to -105 dBm and then to -95 dBm represents an increase of 100 times.)

We had decided at dinner last night that we wanted to go to The Blue Nile restaurant while Mara was here.  The best time to go turned out to be this evening, so Linda made an online reservation for 7:30 PM at the Ann Arbor location (there is also one in Ferndale).  We tested the weBoost Drive 4G-X cellular booster on the drive to/from Ann Arbor and it definitely made a difference in the signal strength we saw on our phones.

It wasn’t until we got part way down Main Street that we realized that today was the opening day of the Ann Arbor Art Fair.  The last place I wanted to be driving, parking, or walking was at the Ann Arbor Art Fair, not because I dislike art (we love art), and not because I dislike art fairs, but because I dislike congested traffic and crowds, which the AAAF has in abundance.  Surprisingly, we were able to park in one of the parking structures a couple of blocks from the restaurant.  After fighting our way through the pedestrian traffic I was even more surprised to find the restaurant essentially empty.  The Blue Nile is slightly outside the portion of Main Street where the AAAF takes place and streets to either side that are closed off to vehicles during the AAAF.  All of the restaurants and the beer/burger joints in and around the AAAF venue were doing a brisk business, especially if they had outside seating (it was a very pleasant evening), but the restaurant was open and the host was very gracious.

The Blue Nile serves Ethiopian cuisine.  Some of the tables are upside down rope baskets with four chairs and two side tables.  We always ask to be seated at one of these because we always order the Vegetarian Feast which is, in fact, vegan.  The Feast comes on a large round tray covered with a layer of Ethiopian sponge bread (made from teff flour) with small piles of the seven different vegetable-based dishes on the menu surrounding a pile of (optional) salad in the center.  Beverages and platters of rolled up sponge bread are placed on the two side tables (we had water and Ethiopian spiced tea).  The meal is eaten by tearing off suitable sized pieces of sponge bread and picking up the eight different selections from the tray.  Before the food was brought to the table we were given hot, moist towels to wash our hands.  Nice touch.

The food was amazing and the experience somewhat more communal than sitting at a standard American table and eating with utensils.  The waitstaff was gracious and attentive and it was a wonderful experience for all three of us.  Mara asked one of the waitstaff to take a picture of the three of us, which they gladly did.  She then uploaded it to her Facebook page along with a brief description of her visit and meal.  One the drive home she already had 12 “likes.”  This is the side of Facebook, and other social media, that is fun.

It was getting dark by the time we got back to the house but we took the time to unload Mara’s kayak from its special mount on the rear of her motorhome that is installed in the tow receiver.  The kayak mounts diagonally from the lower driver side up past the roof on the passenger side and the tip is about 13′ 2″ above the ground.  She was leaving at 6:30 AM the next morning to drive to Cummins Bridgeway to have her main engine and genset serviced and would be traveling south on Hacker Road to Grand River Avenue.  The last time we did this we clipped a branch in the southbound lane on Hacker just north of Bendix Drive not far from Grand River Avenue.  I was concerned that she would catch the same branch and damage her kayak which is why we took it off the rig.

Once the kayak was off the back of her rig and sitting in our yard we said a quick “good night” and all trundled off to bed as 6 AM would come all too soon.  I wrote for a while in bed but was too tired, and full of food, to stay awake.

 

2015/07/14 (T) Red Chili Wine

Leave a reply

Storms moved through the area overnight with more lightning and thunder than rain, or at so it seemed.  The storms were triggered by a cold front, behind which we had a cloudy day with periods of rain.  Linda was up at 7 AM and read quietly until I got up at 8.  I made a full pot of coffee (Cafe Europe half-caff blend from Teeko’s) and then joined her in the living room.

Linda was checking Dr. Michael Gregor’s speaking schedule and saw that he will be at Wayne State University in December and will be one of the keynote speakers for the 2016 Holistic Holiday at Sea vegan cruise.  We have not heard him speak in person, and will not be here in December, so that would be another reason to go on the cruise again.  By 9:45 AM Mara had not emerged from her rig so we went ahead and had breakfast.  Linda then went for a walk and I went to my office and worked on the design of the custom desk for the bus.

Mara finally emerged at 10:30 AM and we chatted for a while until Linda got back.  Our chat was briefly interrupted by a call from Mike (W8XH) on the Novi repeater so Mara got to see ham radio in operation.  My reception was weak and noisy and according to Mike my transmitted signal wasn’t any better.  The only thing that has changed since we tested this late last week is that I got the repaired M-302N VHF/UHF lightning arrestor back from Morgan Manufacturing yesterday and re-installed it.  Mike is going to help me do some more testing, but I am rapidly coming to the conclusion that these units are defective by design and I will have to replace them with something else.  I am disappointed to say the least.

It was another cool, cloudy, rainy day, just the kind of day for staying inside and getting stuff done.  Linda and Mara both had things to do and settled in at the dining room table to work.  Mara has been focused on planning her upcoming travels and spent much of the day making reservations.  Linda worked on the bookkeeping for our GLCC chapter and SLAARC ham radio club (she is treasurer of both).  She also renewed our Coach-Net emergency road service and our Harvest Host membership, which had expired, and probably took care of a lot of other things that I don’t even know about.  Except for an occasional break I worked on the custom desk design until 6:30 PM.  On one of those breaks I needed to measure something in the bus so we gave Mara the inside tour.

When I came upstairs Mara was taking advantage of the unlimited hot water available in our guest bathroom to have a nice long shower.  We know from personal experience what a luxury it is to take such a shower when living in an RV.  Linda had started preparing our dinner so I opened the bottle of Hatch Red Chili wine.  This wine, from St. Claire Winery in Deming, New Mexico is one of the more unusual wines we have ever had but we really like it.  It is a slightly sweet red wine with no tannin, a hint of chili flavor, and heat in the back of the throat on the finish.  We had vegan mock Italian sausages with sautéed onions and red peppers and the wine went well with it.  I had mine on a hotdog bun with mustard.  Mara had another serving of her beef stew, which she is trying to use up, and Linda put out a plate of whole, fresh strawberries.

One of the nice things about having visitors is that meals take longer to eat as we linger at the table in conversation.  Mara returned to her rig around 9 PM to have some quiet time with her cats before going to bed.  Linda decided to watch a couple of TV programs and I went back to work on the desk design.  I called it quits around 10:45 PM and went to bed to work on this post.  The overnight low is forecast to drop into the upper 40’s which should make for excellent sleeping.

 

2015/07/13 (M) weBoost

Leave a reply

Linda got up before I did and went for a long walk.  I was up by the time she got back and made a full pot of the Sumatra Mandheling coffee I just got from Teeko’s.  Mara eventually joined us for coffee and then breakfast.

Mara wanted to get the engine and generator serviced in her Fleetwood Bounder motorhome and asked for recommendations in the area.  There were three relatively convenient options but we had her contact Cummins Bridgeway in New Hudson, in part because she has an Onan (Cummins) generator and in part because we took our Itasca Sunrise motorhome there and were always pleased with the quality of the service.  They said they could take her on Thursday and she set up the appointment.  They estimated three to four hours so she plans to wait for it.

Mara was also interested in a mobile cellular booster for her motorhome, and I have been planning to get one for several years, so we researched the current offerings online.  At one time Wilson Electronics practically owned the mobile booster market.  They have more competition now and their consumer systems have been rebranded “weBoost.”

After scanning what was available we focused in on the weBoost Drive 4G-M and Drive 4G-X.  I downloaded the PDF manuals for each of them and studied the specifications. I don’t care about the marketing hype.  As they used to say on Dragnet “the facts mam, just the facts.”  Both units are 5-band, multi-mode units designed for in-motion use and the specs were very similar, but not identical.  The MSRP on the X model was almost $100 more than the M model so I called Cellular Solutions and talked to Judy.  In practical terms, she said the X model would work with weaker signals.

I was prepared to order two of them but they did not have them in stock at their Sanford, Michigan location.  She thought she could have them to us by Friday but that was not soon enough and we did not want to pay $30 for 2-day shipping on top paying almost $30 in sales tax (for each unit).  So we did what we always do, we checked Amazon.  Amazon had four of the weBoost Drive 4G-X systems so I ordered two of them with Prime 2nd day shipping of $4.99 each and no sales tax.  They are scheduled to arrive on Wednesday July 15 which will give us enough time to get them installed.

The installation on both rigs will require me to attach a steel plate to the roof to act as a base for the small 4″ tall magnetic mount outside antenna.  On our rig I will probably put the antenna up front and screw the plate to the existing aluminum plate, using putty under all the edges and the screw holes, and then caulk around the edge and the heads of the screws.  The cable will come in through the front weatherhead.  On Mara’s rig I will see if I can route the cable through the refrigerator roof vent or the roof-mounted air-conditioner cover.  The route will determine the placement of the steel base plate.

Linda made an appointment for Mara with our hairdresser, Renee, at the J. C. Penney’s salon at 12 Oaks Mall for Wednesday at 1:30 PM.  By the time we had accomplished all of this it was early afternoon and time for a light lunch.  After lunch Linda and Mara went for a long, vigorous walk and I retreated to my office and worked on the custom desk design.  I e-mailed Jarel to see if he would be available on Thursday.  He e-mailed back that any day but Thursday would be OK, so I may go Friday but more likely it will be next Monday.   I thought I could have the design done by Wednesday bedtime, but it would have been a push and I did not want to rush the process and risk making a mistake.  As much as I hate to delay this until next week I may have to.  Mara may leave on Friday, or delay until Saturday or Sunday, and I want to be hear when she leaves.  Meanwhile, Madeline is coming to stay with us on Friday and will be here until Monday.  These are indeed busy times.

I came back upstairs just before 5 PM and found the ladies sitting in the shade at the east end of the deck.  Mara was busy using MapMyPlaces to plan the next leg of her travels from our house to Quebec City, a trip of just under 1,000 miles.  I got a couple of ice cold beers (Linda did not want any) and we sat and talked until Mara returned to her rig at 6:30 PM to tend to her cats and have an hour of quiet time before dinner.

We got back together at 7:30 PM for dinner, which consisted of leftovers plus a simple salad for us.  Dinner led into a long discussion about health and nutrition.  We talked about the Holistic Holiday at Sea vegan cruise, which usually takes place the first week in March, and the vegan summer fest that takes place each July in Pennsylvania.  Mara seemed interested in both and thought she might be able to get her friend, Michael, to go on the cruise with her.

The more we talked the more we thought we might like to go again.  The last time we went, in 2013, we researched places where we could board the cats.  The only place we found that looked any good was in Punta Gorda.  Punta Gorda is quite a drive from Ft. Lauderdale, but it is not that far from Arcadia where we will be parked for January and February.  It would be easy to take the cats there and then drive to the Port of Miami to catch the ship.  However, if Mara goes on the cruise we might have another option.  When she has to leave her rig for a while, such as her recent trip to Belgium, she flies her sister in from California to house and cat sit.  She assured us that “sis” would be happy to take care of our cars as well.  All that would be required would be for us to have our motorhomes at the same RV park.  That could be Big Tree in Arcadia (since we would already be there) or someplace near Miami (if we could both get in).  Adjacent sites would be nice, but not necessary.  I have no idea if we will do this, but it was fun to consider the possibility.

 

2015/07/12 (N) Mara Comes To Visit

Leave a reply

When I shut down the bus yesterday I forgot to shut off the air supply to the engine accessories and turn off the chassis batteries, so I did that as soon as I got up this morning.  I then made coffee and we had our usual juice and homemade granola.  After breakfast Linda went shopping and I went to Lowe’s.  She picked up a lot of fresh vegetables at the Howell Farmers Market and finished up at Meijer’s.  I bought a 4-piece screw extractor set and then stopped at O’Reilly’s and bought two gallons of 50/50 pre-mixed universal antifreeze to top up the Aqua-Hot in our bus.  I stopped at Teeko’s Coffee and Tea and had them roast a pound of Sumatra Mandheling beans.  We have not tried these before but Mary thought we would like them.  They are not decaffeinated, but we try to keep a regular coffee bean on hand for company, after dinner, or when we want (need) the high octane in the morning.

Linda had been in contact with our friend Mara for the last few weeks so we knew that she might stop here on her way to the Canadian Maritime Provinces.  Late last week she confirmed that she would be here on Sunday so after our morning errands we turned our attention to getting ready for her arrival.  She lives/travels in a Fleetwood Bounder (Class A motorhome).  We saw it in Quartzsite, so we knew it was somewhere between 35 and 40 feet in length and that she does not tow a car behind it.  Yesterday we moved our bus so she could park on the level pad with easy access to our 50 Amp electrical hookup.  I cleaned up the coaxial cables that I had spread out all over the rec room floor and Linda vacuumed the carpets and wood floors and cleaned the bathrooms.  We keep a clean house but it is not always tidy as we are involved in a lot of projects at the moment.  But when company is coming we like things to a least start out tidy.

Mara was coming from Michigan City, Indiana so she only had 200 miles to travel.  Most of it would have been on Interstate highways but she decided to detour over to Three Rivers, Michigan to visit a Latvian community located nearby.  She finally arrived at our house around 2:30 PM.  We met her in the street and I directed her into her parking spot.

It’s always exciting, and a bit intense, to meet up with an RV friend and that was certainly the case here.  Mara had enjoyed her stop at the Latvian community even though she found them in church.  We had last seen her in Quartzsite, Arizona in February.  We had all had a lot of RV travel adventures since then, and it was also her first visit to our house, so we had lots to talk about.

Linda made bow-tie pasta with mushrooms, onions, garlic, sun-dried tomatoes, and basil pesto using basil that she grew on our back deck.  We had a simple green salad and Italian bread with the meal and enjoyed 1-1/2 bottles of the 2013 Egri Merlot between the three of us.  We sat on the deck enjoying the last of the wine until it cooled off and we went inside.  By 9 PM we were all tired but we insisted that Mara stay for fresh sweet cherries.  Rejuvenated by the cherries we all got our second wind and had a long conversation about RVs, cellular and Wi-Fi communications while traveling, and a cool routing app that Mara uses (MapMyPlaces).  By 11 PM we were all tired for real and Mara returned to her rig for the night.  It had been a long, but very satisfying, day for all of us.

 

2015/07/11 (S) Impactful Tools

Leave a reply

We had a small crowd for our SLAARC breakfast this morning but good conversation.  After breakfast we drove to Chuck’s house and picked up the manual impact screwdriver.  Barb was up in the thumb visiting her brother-in-law who recently lost his wife (Barb’s sister).  We lingered for a while and then left for home, stopping for gas on the way.

Back at the house I started a load of laundry and then went to work on the stop block screws.  Linda helped steady the ladder and pass tools and parts back and forth.  I got three of the four screws out of the two stop blocks but the head stripped on the forth one so I was only able to remove the aft stop block.  I tried different bits and even tried drilling a small hole in the center of the head to allow the bits to go in farther but it did not work.  The next approach will be a screw extractor, but first I have to go buy one.

We had soy yogurt for lunch with red grapes and I had a few pretzels with roasted red pepper hummus.  I kept trying to get to the basement to work on the desk design but kept getting detoured.  Once I finally reached my office I found that the mouse trap that I had placed under one of my desks was out in front of it.  The food was gone but there was no mouse, only mouse poop.  I realized that the trap was upside down which allowed the door to swing open.  Our best guess is that a mouse was trapped and the cats pulled the trap out from under the desk and accidentally turned it over while pawing at it trying to get the mouse.  Since there was no sign of a mouse having been caught by one of the cats my best guess is that it escaped, for now.

I checked e-mails and found the one with the credentials and instructions for the QTH.com web-hosting of SLAARC.com so I shared those with the other members of the SLAARC website team and then logged in to check out the log file I had created the other day as a test.

I decided to reconnect the Yaesu FTM-400 radio to the Diamond X-50 antenna on the tower so I could monitor the Novi and South Lyon repeaters while I worked in my office.  I had quite a mess on the ham shack desks and decided the best way to deal with it was to install Mike’s Icom IC-2820H in my car in place of our Icom V-8000 2m rig.  At least that would get the 2820 off the desk.  I checked that the mounting brackets and they were identical so I removed the V-8000 but left the mounting bracket installed in the car.

Mike had modified the power cord on his radio by cutting off the T-connector and replacing it with Andersen PowerPoles so I had to modify the power cable in my car to match as I could not modify Mike’s radio.  I removed the fuse from the positive (+12VDC) lead and then cut off the T-connector, leaving about 6″ of wire so I can add PowerPoles and make it into an adapter cable.  I brought my Hakko soldering station up from the basement, set it up on the floor behind the center console, ran an extension cord from the garage, and used it to solder PowerPole contacts to the two wires.  I then inserted them into the black/red housing pair and snapped them in place.

I mounted the IC-2820H, connected the power cable and connected the coax from the antenna.  I reinstalled the fuse in the positive lead, started the engine, and turned the radio on.  A couple of hams were chatting on the Novi repeater, one of whom I knew (Jim, KB8TAV).  When they finished I gave Jim a call and he came back to me, the first time I have been able to use the Novi 440 repeater from my car.  Jim signed off and I switched to the South Lyon 2m repeater and gave a general call.  Steve (N8AR) came back to me and we had a short QSO that verified the radio/antenna was also working on 2m.  As we were wrapping up Linda started fixing dinner.

Linda fixed a simple salad and Dr. Praeger’s vegan hamburgers with Daiya non-dairy cheese.  These patties were also squishy rather than firm and, like the ones at Zingerman’s Roadhouse the other night, where not very satisfying.  They tasted OK, and we ate them because we are not inclined to waste food, but there is a lot more to what makes food satisfying than just taste.  Sight, smell, and texture (mouth feel) are also important.

Linda had several TXT messages from Mara letting us know that she would be arriving tomorrow sometime before 2 PM as she wanted to watch the Wimbledon finals at that time.  Linda and I considered how best to accommodate Mara’s motorhome and finally decided to just pull our bus straight forward until the nose was at the edge of the concrete driveway.  That created more than enough space on the level part of the pull-through driveway for her to park and plug in to our 50 amp service.  The only loads we have in the bus at the moment are battery chargers so we used our 15 amp cord to plug it into a garage outlet.  Since I had to start it to move I switched it to high idle once I had it positioned, leveled it, turned on the OTR air-conditioning to put a load on the engine, and let it run for 30 minutes.

I returned to my office after dinner and work on the desk design for a while but by this point I was tired and not really in the mood.  The last time I updated the BCM page on our website was after the February 2015 issue came out.  I have had articles in the March, April, and May issues and will have articles in the June and July issues.  I captured the covers from March, April, and May and updated the page.

I exchanged e-mails with several people and spent some time looking at dual and triple monitor stands on EBay.  We rarely use EBay and the site made me change our password before it would let me log in.  There was a large selection of products but none of them were exactly what I am looking for.  There wasn’t any rush so I decided to revisit this tomorrow.

 

2015/07/10 (F) Eye of the Beholder

Leave a reply

I was up at 7 AM and made coffee.  This usually wakes Linda up, but not this morning.  After waiting a reasonable amount of time I went ahead and started drinking.  If someone tells you that 7:30 is too early in the morning to be drinking don’t believe it, and if someone tells you that you should never drink alone don’t believe that either.

Linda eventually got up but looked really tired.  Unbeknownst to me she had awoken in the middle of the night and not been able to get back to sleep.  Neither of us were hungry after the large meals we had last night for dinner so we just had a little juice to wash down our little pills (vitamins and an allergy pill for me).

I’ve been looking for a system to wall-mount multiple flat-panel LCD monitors above/behind the desks in the ham radio shack portion of the downstairs office.  Linda was helping search for products and found AFC Industries in New York.  Their website had a large variety of very serious looking products.  The ones that caught my eye were a 72″ wall mount track with four articulated monitor mounts and a 48″ track with three mounts.  They had an 800 number and the website said to call for pricing.  That’s usually a bad sign but they appeared to have exactly what I needed so I decided to call them later.

I had planned to work on the custom desk design all day but Linda had other ideas.  She had become frustrated with the clutter in the library and the inability to really clean that room and decided that today was the day to do something about it.  Point acknowledged.  Some of the clutter (but not all) is artwork and she thought the place for us to start was to get some of it hung on the walls.  Again, point well taken and agreed.  Doing this correctly is a slow process, however, so I knew my plans for the whole day had just changed.  Sometimes you have go along to get along.

We have artwork that is not currently displayed which ranges in size from 8″ x 10″ to 2′ x 5′.  Some of it is framed and ready for hanging and some of it is not.  It is mostly paintings but there is some photography, a few poster prints, and some textile pieces.  We went through every piece looking primarily for oil paintings that we liked and that would fit the spaces we had available to hang them.  Before we were finished with this project for the day we had hung eight paintings.  We also found four paintings that we liked but lacked frames, or ways to hang them, and set them aside for now.  Most of the paintings were done by Ann Metzger, my late great Aunt, but one was done by my late mother.  We had also moved a few items out of the library into the driveway to be donated to the Salvation Army.  I tend to use drywall screws with large fender washers as hangers as they are strong and very secure.  We ran out of stainless steel fender washers so that created a natural stopping point for our task.

For a change of pace I decided to climb the tower to measure the center sleeve inside diameter so I could determine what outside diameter mast to get.  I got out Mike’s climbing harness, set up the step ladder, put on the harness, climbed up onto the roof, connected the waist strap around the tower, and started climbing.  I alternately attached and detached the two safety cables and made good progress until I got to the DB8e OTA TV antenna.  To go higher I would have to move from the west face to the northeast face and then undo the waist strap and reconnect it above the mounting point for the OTA TV antenna.  I did not feel like doing that today.  I was, however, able to reach the bottom of the sleeve by extending my tape measure.  The tip of the tape fit inside the bottom of the sleeve with what appeared to be about a quarter inch to spare.  I then climbed down and got off the roof, got out of the climbing harness, and put it away.

Back in the house the tip of the tape measured approximately 1-1/8″ across thus it appears that the sleeve is sized for a 1-3/8″ outside diameter mast.  I checked Universal Towers website, since they are located in S. E. Michigan, but their selection of aluminum masts did not include this O.D.  OnlineMetals.com has 1-3/8″ O.D. 6061-T6 aluminum tube in five different wall thicknesses and a large variety of lengths so that may be the easiest way to get one.  But first I will check the usual ham radio places.

Next I called AFC Industries and was routed to Ewa who was very curious what I was going to use the multiple monitors for since I was not a company.  I tried to explain why I would need at least three monitors in an amateur (ham) radio shack but she had never heard of ham radio and I don’t think I did a very good job of explaining it.  She was paying attention to what I was describing, however, about where I wanted to position the monitors.  She could not give me pricing on the phone so I gave her my e-mail address to send a quote.  Ewa was prompt in the sending the quote but I did not see it until later as we had the leftover seitan stroganoff for lunch and then left to run errands.

Linda had loaded our donation items in the back of my car while I was on the phone.  I brought seven paintings to the car and we left.  Our first stop was the Salvation Army donation center between Brighton and Howell.  We then went to the Howell Art and Framing Center, a frame shop on the east end of downtown Howell.  The proprietor, Rick, worked with us quite a while as we selected frames for four of the seven pieces and played with his Jack Russell terrier, Rudy.  These four pieces will go in the library when they are done in about three weeks.  Our final stop was Meijer’s where we picked up fender washers, salad greens, and coffee filters.

Back at the house I went to my office to check e-mail and work on the desk design.  The quote was there from Ewa and she had already made a follow up phone call so I opened the e-mail and looked at the quote.  It was almost double what I expected which was already double what I wanted to spend.  I e-mailed her back and asked for a simpler configuration but politely explained that her numbers were way out of my price range.  The interesting thing about such experiences is that the Ziotek products I’ve been looking at on the CyberGuys website suddenly do not seem so expensive.  It’s funny how that works.

While I was working I got a TXT message from Chuck following up on the refrigerator installation.  I texted back that I had not yet checked whether we can open the fixed glass window frame but would do so immediately and call him back.  I moved the 7′ step ladder next to the bus and climbed up to inspect the stop blocks as Linda pushed the window open.  The two stop blocks on that frame were definitely contacting the drip rail immediately above them preventing the frame from opening more than about 8 to 10 inches at the bottom.  The good news was that the Zip Dee patio awning would not interfere with the opening of the window.  The bad news is that I was not able to remove the two Philips head screws that secured each block to the frame.

I called Butch to find out what the tool was that I used at his shop to work on my brakes.  He said it was a manual impact tool.  This nifty little device is a screwdriver that turns through a small angle when you strike the end of it with a hammer.  This has the unique benefit of driving the screwdriver bit into the screw head while turning.  Butch thought that any auto store would have these so I called the local O’Reilly’s but they did not have any in stock in the store.

While I was talking to Butch Linda was researching other places to buy such a tool.  It turned out that Sears would be a good choice but the closest one was at Twelve Oaks Mall over 20 miles away.  I was getting ready to drive there but called Chuck first.  It turned out that he has two of them so I will borrow one tomorrow after our ham radio club breakfast.  I spent the last couple hours of the evening working on the desk design.  I then went to bed and worked on this post.

 

2015/07/09 (R) Graduation Celebration

Leave a reply

My main focus this morning was my dentist appointment at 10:30 AM.  I wanted to leave the house at 9 AM so I had plenty of time to get there and actually left at 9:15.  Once I was on I-96 eastbound and clear of the construction at US-23 I called the South Lyon 2m repeater and Steve (N8AR) came back to my call.  I-96 was very slow as I approached Wixom Road so I exited at Beck Road and dropped down onto Grand River Avenue (GRA).  I got off GRA at M-5 in Farmington Hills and took that to where it ended and rejoined GRA.  I continued to Telegraph Road and headed south.  My QSO with Steve lasted until there by which point there was too much noise and not enough signal for a pleasant conversation.  In spite of the change from my intended route I was still at the dentist’s office by 10:10 AM and they were able to take me in early.

On the way home I called the South Lyon 2m repeater and Mike (W8XH) responded to the call.  As a result of differing weekend plans I decided to head to his QTH and pick up his climbing harness.  While I was there I took a few minutes to look at his reconfigured ham shack and his Canon EOS D7 Mark II DSLR.  To say that I am unhappy about Sony’s failure to release the alpha 99 II FF DSLT would be a gross understatement and I am not alone in the sentiment.

Back at the house we had a light lunch of sourdough pretzel nibblers and roasted red pepper hummus.  I then went to my office to continue working on the custom desk design for our bus.  But first I was taking care of e-mails when Williston Crossings RV Resort called back and said they had a spot for us for December.  We had not heard back from Suncoast Designers regarding an appointment to have a fogged window repaired so I called them.  They said they had replied to my e-mail letting us know that we were scheduled for December 7 but the e-mail had not come through, so I need to check the spam filter.

Linda called back and accepted the spot at Williston starting December 1st.  We will have to leave for one to three days to have the window taken care of and we will depart on the 26th for the Arcadia Bus Rally but the monthly rate will still be cheaper than paying for three weeks at the weekly rate.  Besides, they did not have a two or three week opening.

I did get a couple of hours of work done on the desk design and then had to quit.  A month ago our elder grand-daughter, Katie, missed her high school graduation due to a sudden illness.  Meghan and Chris (Katie’s dad) made reservations at Zingerman’s Roadhouse for 5:45 PM today and we gathered to celebrate this milestone in Katie’s life.  Brendan, Shawna, and Madeline also joined us and we all enjoyed quizzing (and teasing) Katie about her upcoming college experience at Northern Michigan University where she plans to major in Wildlife and Fisheries within the larger biology program.

Linda and I had the black bean burger with fresh, hand-cut fries.  Although it was tasty, and vegan, it did not have any binders and completely fell apart when I tried to assemble it as a sandwich.  We ordered them on sourdough bread as the buns had an egg wash.  Zingerman’s has excellent bread, but it is the rustic style with crusts that are so tough you cannot cut them with a knife (or a chainsaw).  Thus the “burger” was difficult to eat even as an open faced sandwich and was basically a messy pile of “stuff” on my plate.  Linda seemed to enjoy hers but I regretted ordering it even though I ate the whole thing.  I did, however, have a glass of Schramm’s Raspberry Mead made by my friend, and former colleague, Ken Schramm.  It was excellent.  The hand-cut fries were also good and the waitress was delightful, which is always a plus.

Back home I worked for a couple more hours in my office and then worked on this post.  I put my new N.T.I. dental appliance on my lower front teeth just before going to bed.  It obviously felt a little strange but did not keep me from falling asleep.

 

2015/07/07 (T) Field Day Photos

Leave a reply

We did not sleep well last night, were slow to get up this morning, and slower to get going.  A cold front was pushing in from the northwest with the promise of cooler temperatures and sunny, blue skies, but first we were in for a day of overcast conditions and rain, which started around 8:30 AM.  It was a perfect morning to sit quietly in the living room, reading, writing, and drinking our coffee but too warm to turn on the gas fireplace logs.

Yesterday Linda started researching RV parks in southern Florida for this coming winter and we spent some time this morning looking at them online.  There was one in particular, Riverside RV Resort and Campground, which caught our attention.  Located on the Peace River near Port Charlotte and Punta Gorda, it is a short distance southwest of Arcadia where the annual Buss’in rally is held.  We went to the rally two years ago and had a great time so we will go again this year if we decide to winter in Florida, which is our current inclination.

One of the reasons for us to winter in Florida, at least occasionally, is our many contacts there.  Our friends, Steve and Karen, bought a mobile home near Venice; our friends, Chuck and Barbara, bought a lot at Pelican Lake in Naples; our ham radio friends, Bruce and Linda, bought a house on 25 acres near Brooksville; our GLCC fiends, Ed and Janet, bought a place that I think is near Sarasota; our FMCA Freethinker friends, John and Marian, bought a place in Dunnellon; and our other FMCA Freethinker friends, Ed and Betty, bought a place in Bradenton.  In addition to all of those folks quite a few of our RV friends, like Pat and Vicki, spend the winter in Florida, and the state has a lot of things to see and do, including one of the best state park systems in the nation.

Linda left for her appointment with the dermatologist and I got to work at my desk.  I continued to deal with e-mails related to the SLAARC domain transfer and an ongoing conversation with BCM publisher Gary Hatt.  I got a Dropbox link to some Field Day photos from Steve (N8AR) a few days ago and downloaded them.  Last night I got a similar e-mail from Mike (KE8AGY) with a Google Drive link and today I got one from Jim (N8HAM) so I downloaded all of those photos.  I spent most of the rest of the day selecting and processing the photos I took and then processed all of the ones I got from other people.

I took a break to chat with Linda when she got back from her appointment.  I then removed the defective Morgan M-302N VHF/UHF Lightning Arrestor from the cable entry box and boxed it up to ship back to Morgan.  I took another short break for dinner, which was an excellent Farro and kale dish, and then worked until 8:30 PM when we had agreed to watch a movie.  This evening’s choice was The Imitation Game, a film about Alan Touring and the concepts he invented that allowed the British to build a machine that broke the coded messages generated by the German Enigma machine during WWII.  I spent another hour at my desk after the movie before going to bed and finishing this post.  Tomorrow morning I plan to finally upload some blog posts and then get back to work on the design of the custom desk for the bus.

 

2015/07/06 (M) Arrested

Leave a reply

Our morning started with coffee, once we got up, and then granola for breakfast.  We are both in better health, generally, than we were in our 30s, 40s, and early 50s, but having Madeline here requires a different kind of constant energy and attention and we are somewhat tired by the time her parents take her home.  It’s a good tired, of course, but we were still tired this morning and slept in for a while.

I had hoped to get back to work on the bus today but the afternoon highs were forecast for the mid-80’s which would make for less than comfortable working conditions.  The forecast for the rest of the week was for highs in the 70’s so I decided to wait another day.  I really needed to get back to work on the bus but I also had other things to take care of that seemed at least as pressing.

At the top of my list was the SLAARC website.  Scott Neader had successfully copied the SLAARC WordPress website from GoDaddy.com to QTH.com and changed the domain pointers to point to the QTH servers.  He needed me to check that everything was working correctly.  He was also preparing to transfer the domain name registration and needed my involvement for that process.

Part of our home ham radio shack with the new Yaesu FTM-400 2m/70cm mobile radio shown lower left.

Part of our home ham radio shack with the new Yaesu FTM-400 2m/70cm mobile radio shown lower left.

Continuing with the ham radio theme, I needed to resolve how I was going to mount the new Diamond X-300NA 2m/70cm antenna and possibly remount the outside omnidirectional antenna for the cellular booster system.  That meant doing some minor engineering and possibly ordering parts.  I was also preoccupied with the fact that I was unable to participate in the SLAARC info net last night, apparently due to some malfunction in our ham radio system, and it was going to bug me until I figured it out.

Last, but not least, was the fact that I was now one month behind on uploading posts to our blog.  The farther behind I get the more of a chore it is to get caught up.  Like cleaning up my e-mail inboxes, which I also need to do, it finally becomes “the” thing I “have” to take care of before I can concentrate on any other work.  I hate it when that happens, but it is a recurring problem and I have no one to blame except myself.

I often seem to spend the first part of each morning finishing up my blog post (draft) for the previous day and outlining the one for the current day or making notes for future days.  It’s my way of reflecting on what I have done and thinking ahead to what I need/want to do next.  By the time I actually got to work this morning it was after 10 AM and Keith showed up to cut the grass.  It did not rain this past week and he was finally able to cut the grass at the west end of the property, which is low and often wet.

Before going to my office I checked the rebate paperwork which Linda had assembled for the new Yaesu ham radio and got it ready to mail.  I also started filling out the prescription form to send in to Catamaran Home Delivery when I realized the doctor had written the Rx for 30 days instead of 90.  I called the clinic and they said it would (probably) be OK to have Linda bring it to her appointment tomorrow and have the doctor rewrite it.

Our coaxial cable adapter kit.

Our coaxial cable adapter kit.

When I finally got to my office I looked at the SLAARC WordPress website on my computer to make sure everything was working.  The only thing that was not working was an online tool for logging check-ins for the Sunday evening info net.  I e-mailed Scott about that and then logged in as an administrator and updated several plugins.  I logged in to the FMCA-GLCC website and updated it and then did the same for our personal website.  I then created a support ticket at iPower.com regarding the broken FMCA Freethinkers website.  I dealt with SLAARC related e-mails throughout the day.

I spent the rest of the morning editing blog posts for the second half of June and early July and then started selecting and processing photos to use with blog posts, and processed those further.  By the time I quit working I had photos ready for everything except the three days of the ARRL Field Day event.

It was a nice day, if a bit warm, and we had the house opened up including the basement doorwall.  Other than a short break for lunch by 2 PM I had sat long enough and decided to setup the new Diamond X-300 2m/70cm antenna on a temporary pole.  I rummaged around the garage and found the four section pole I had used at the old house.  The pieces were buried under a pile of GLCC related PVC flag pole sections but I was able to slide them out.  I cleaned up the swaged connections and used a light coating of anti-seize compound before assembling them.  I stood it upright on the ground at the NE corner of the deck and zip tied it to the corner post at three points.  I then set up the 7-foot step ladder on the deck and removed the upper two sections.

The new Diamond X-300NA VHF/UHF ham radio antenna is visible atop the pole at the corner of the deck.

The new Diamond X-300NA VHF/UHF ham radio antenna is visible atop the pole at the corner of the deck.

I unbolted the X-300 antenna from its storage place on the side of the 40-foot tower and set the base on the east deck railing.  I then got one of the 35-foot heliac coax cables from the basement and attached it to the feed point of the antenna.  With Linda’s assistance I mounted the antenna to the top of the topmost mast section and zip tied the coax to the mast.  Back up on the ladder I was able to slip the upper mast sections into the lower mast sections and add a couple more zip ties to secure the coax.

I routed the coax over to the cable entry box (CEB) so that it was not visible.  The antenna is shielded from view by our Norway Crimson King Maple tree and the mast is very inconspicuous; not bad for a temporary installation.  I disconnected the X-50 antenna coax from the Morgan UHF/VHF Lightning Arrestor in the CEB and attached the coax from the X-300 in its place.  I went back to the ham shack, turned on the Yaesu radio, and listened.  Nothing.  I tried calling the South Lyon 2m repeater but nothing came back.  I tied the Novi 440 MHz repeater…nothing.  I turned the radio off and moved the coax to our Icom IC-7000 radio and repeated the tests.  Same results.  Something was clearly wrong so I called Mike (W8XH) to see if he could help me figure it out.

Mike was out but on his way back home and called me when he was back at his base station.  We verified the transmit and receive squelch settings on my radios and then tested both antennas on both radios.  Using our cell phones we confirmed that he was not hearing my transmissions and I was not hearing his, either direct (simplex) or through the repeaters.  It was now clear that RF signals were not making it into or out of my system and there was one component that was common to all configurations; the Morgan M-302N VHF/UHF Lightning Arrestor.

I have a coaxial cable adapter kit that allows me to temporarily interconnect most of the connectors used in amateur radio coaxial cables.  At Mike’s suggestion I used the kit to assemble an adapter (barrel connector) with N-female connections on both ends.  I then disconnected the antenna and radio coaxial cables from the lightning arrestor and connected the radio coax directly to the X-300 antenna coax.  Back in the ham shack I tested this configuration with both radios on both repeaters.  I was receiving both repeaters with S7 to S9 signal strength, which is good, and very little noise, which is also good.  Mike reported that my signal was very strong into both repeaters and that he was receiving me full-quieting.  I shut the radios off and then switched the connection in the cable entry box to the X-50 antenna.  We repeated the tests with the same results, confirming that the problem as the lightning arrestor and only the lightning arrestor.

The current status of the cable entry box.

The current status of the cable entry box.

Although I was disappointed that the M-302N was defective I was overjoyed, or at least relieved, that everything else was working perfectly.  Although the new X-300 antenna turned out not to be “necessary” having it on a mast above the tower will give us an even better transmit and receive capability than the current X-50 installation.  I even have some hope of being able to reach repeaters farther away in the Detroit metro area as well as in the Lansing, Flint, Ann Arbor, and Ypsilanti areas, and perhaps much farther beyond.  Windsor (Canada) and Kalamazoo are possible when atmospheric conditions are right for longer range propagation, and the Saginaw, Mt. Pleasant, Fort Wayne (Indiana), and even Cleveland (Ohio) areas are not out of the question.  Once, at the old house, I was on the Spirit of 76 repeater atop the Renaissance Center in Detroit when it picked up a 2m station from Iowa.

Relieved of my concerns, especially about the operation of our new radio, I returned to my computer-based tasks.  The first thing I did was e-mail Chris Perri at KF7P Metalwerks regarding the lightning arrestor, which I purchased from him as part of the cable entry box.  He apparently forwarded my e-mail to Morgan Manufacturing Inc., or at least e-mailed them, as I got an e-mail from Bob at Morgan with instructions on where to return the unit.  It has a lifetime warranty and he indicated they would repair or replace it as needed.

I spent the rest of the afternoon and evening, except for dinner, working on photos.  Dinner was chickpea salad on a bed of greens with steamed baby bok choy dressed in rice vinegar.  It was a perfect meal for a warm summer evening.

The humidity had been up all day and rose as the temperatures dropped at sunset, although they did not drop much.  Linda was watching an episode of Scorpion when I finally came upstairs.  We watched an episode of NCIS Los Angeles after that and then an episode of Two and a Half Men, which I have always enjoyed.  We turned on a small fan but it was a warm, uncomfortable evening for sleeping.  For whatever reason we did not turn on the air-conditioner although in hindsight we should have.

 

2015/07/05 (N) Return to HFM

Leave a reply
Madeline helps Grandma Linda mix the batter for vegan blueberry pancakes.

Madeline helps Grandma Linda mix the batter for vegan blueberry pancakes.

The day started with Grandma Linda’s fabulous, made from scratch, blueberry vegan pancakes for breakfast, which Madeline helped make!  After breakfast we took Madeline to the Howell Farmers Market (HFM).  She had been to this market with us once before and it was a beautiful Michigan summer morning for a return visit.  On the drive over we discussed why it is that you cannot buy a farmer at a farmers market and you cannot buy a garage at a garage sale.  English can be a funny/strange language.

We walked the entire market, which is not really that big, and Linda bought some fresh strawberries.  A couple of the regular vendors were missing.  In particular we wanted to buy some more soap from Marjorie but she was not there.  Madeline enjoyed checking out the child and doll sized wooden furniture that one vendor had for sale.  We kept an eye out for someone selling jelly beans but did not see any so we stopped at the CVS on the way home and got a small bag of them.

We had just gotten home and I was unlocking the front door when Brendan and Shawna arrived.  We had a nice visit and they stayed for a light lunch.  By the end of lunch Madeline was showing signs of being ready for her nap so Brendan transferred the car seat and stroller from Linda’s car to their car, gathered up all of Madeline’s things, and loaded their car.  Madeline left with her parents at 12:30 PM and Linda laid down for a nap shortly thereafter.

I looked at the SLAARC WordPress website on my iPad to make sure it was working.  I checked most of the pages except for the Member Only Area, which requires a login, and they appeared to be OK.  I then went to my office to deal with things that needed to be dealt with from there.

Madeline tries on a child sized rocking chair at the Howell Farmers Market.

Madeline tries on a child sized rocking chair at the Howell Farmers Market.

My first task was to update the roster and financial records for our FMCA Freethinkers Associate Chapter.  I sent e-mails to new members, uploaded the updated roster to our Dropbox, and e-mailed everyone that they were available.  I had received the draft copy of the June 2015 issue of Bus Conversion Magazine on Friday.  I proofread part 3 of my 4-part article on the exterior renovation of our motorcoach and sent corrections to the editor.  I then settled in to edit blog posts.

I took a break for dinner.  Linda cooked Brussels sprouts and heated some vegan riblets.  The barbecue sauce on these riblets is very tasty.  We had vegan chocolate cupcakes for dessert and they were very tasty too.  I then went back to my office and continued editing blog posts.

I took a break just before 8 PM to join the South Lyon 2m Information Net using our new Yaesu FTM-400DR/DE RADIO but I did not hear anything except noise.  I left the radio on for a while and then turned it off.  I switched the coax to the Icom IC-7000 and turned it on but did not hear anything there either.  I turned the IC-7000 off, switched the coax back to the FTM-400, turned it back on, and went back to work at my desk.  Around 8:30 PM the squelch started opening and I heard very faint voices way down in the noise.  After listening carefully I was able to determine that it was Steve (N8AR) running the net but I could not understand most of what was being said.

It was the first time in a long time that I had tried to participate in the net and I was disappointed that the new installation of the antenna on the tower and coax cables to the radios in the basement was not working adequately.  They were working OK when I tested them with Mike (W8XH) so it could have been an unusual band condition but Steve was obviously getting in from farther to the west than our QTH.  I enjoy operating and am looking forward to finally having our larger tower up and some HF antennas in operation but for now I need to concentrate on getting the VHF/UHF stuff working reliably (correctly and consistently).

I exchanged some e-mails with Gary at BCM regarding the magazine and then continued editing blog posts.  I got through the end of June by 11 PM and quit for the night.

2015/07/04 (S) Another Fourth

Leave a reply

Linda was up at 7 AM and grabbed a shower as Madeline is usually awake by 7:15 and up between 7:30 and 7:45.  Madeline tends to wake up hungry so Linda likes to have breakfast ready to go.  I was up by 7:20 and also grabbed a quick shower.  When Madeline was finally ready to get up she let Grandma Linda carry her into the living room and hold her in her arms for a while.  When she was ready to sit up Linda brushed her hair and then Madeline returned the brush to the master bathroom.  Linda got her changed into her day clothes and then we all had breakfast.  Linda and I had our usual coffee, orange juice, and granola with fresh berries plus some vegan sausage links.  Madeline also had the sausage links and berries but her main course was toaster waffles with a little bit of real maple syrup.  Yum.

One of the swans at the Brighton Mill Pond.

One of the swans at the Brighton Mill Pond.

After breakfast Madeline wanted to go look for chickens so she and Grandma Linda went for a walk.  When they got back I learned that they saw three chickens, a duck, some bunnies, and a chipmunk (ground squirrel).  We then read a couple of stories and built a fort in the living room.  We talked about going to the Mill Pond in Brighton to see/feed the ducks but there was some sort of running event this morning, a parade at 10 AM, and then a rubber ducky race at the Mill Pond following the parade.  It is the 4th of July, after all, and most communities have celebratory events going on all day and into the evening, ending with fireworks displays.  That sounded like a crowd to me, with the attendant parking hassle, but we figured the crowd might have thinned sufficiently by 10:30 AM to make the experience a good one and decided to chance a visit.  Linda made PB&J sandwiches and packed some grapes and cookies.

Madeline sitting at a picnic table at the Brighton Mill Pond playscape.

Madeline sitting at a picnic table at the Brighton Mill Pond playscape.

We parked in the lot behind the La Marsa restaurant, which is far away from the Main Street part of the Mill Pond, and walked down the boardwalk to the playscape.  There were a lot of people gathered around the Pond for the rubber ducky race and quite a few children at the playscape with their adult chaperones.  Madeline explored the entire playscape with great enthusiasm.  By the time she was done it was 11:30 AM and she was hungry so we had lunch at one of the picnic tables under the shade of a big tree.

After lunch Grandma Linda stood in line with Madeline to use the bathroom.  We then walked around the Mill Pond and paused to cover our ears while the emergency sirens were tested, this bring the first Saturday of the month.  We had a leisurely stroll back to the car and I had a nice chat with a fellow photographer along the way.  He is a local artist/writer with a deep interest in the Mill Pond and the wildlife that calls it home.  He wrote down his website URL for me: http://Words4It.com.  I checked it out when we got home and it is a valuable resource for anyone interested in the flora and fauna of the Brighton Mill Pond.

The various shades of green with a few orange flowers caught my eye while strolling the boardwalk at the Brighton Mill Pond.

The various shades of green with a few orange flowers caught my eye while strolling the boardwalk at the Brighton Mill Pond.

Back at the house Madeline had some soy yogurt and fresh berries before taking her nap.  I don’t know if she fell asleep and woke up or never completely fell asleep but around 2 PM I heard her fussing.  When I checked on her she said she needed to go to the bathroom.  Linda had fallen asleep but that is a duty she takes care of so I woke her up.  Madeline took care of her business, laid back down, and fell asleep.  Linda stayed awake.

With Madeline asleep I took the opportunity to go to my office and check e-mail.  There was one from Scott at QTH.com indicating that the SLAARC website had been copied to the QTH web servers and was ready for testing.  I think that meant the GoDaddy DNS had been changed to point to the QTH installation but I don’t think the domain name registration had been moved yet.  I will need to clarify that with Scott on Monday.  I also had an e-mail from Gary at Bus Conversion Magazine with the draft of the June 2015 issue attached.  This issue has part 3 of my 4-part article on the 2011-12 exterior renovation of our Prevost H3-40 motorcoach.  I replied that I would proofread it and submit corrections before I go to bed tomorrow night.

Madeline takes the high road and Linda takes the low road on the Brighton Mill Pond boardwalk.

Madeline takes the high road and Linda takes the low road on the Brighton Mill Pond boardwalk.

Although Linda is much more physically active with Madeline than I am I was feeling the need for a nap and laid down at 3 PM.  I heard Madeline get up around 4 PM and I finally got up at 4:15.  Linda enlisted Madeline’s help preparing dinner while I took pictures.  The first task was shucking the whole ears of corn.  Next, Linda let her put them in a large pot of water, add a little bit of sugar, and stir.  While the pot started to heat up on the stove Madeline helped prepare the strawberries by washing them.  Linda then got the vegan burgers ready to grill (inside on our stove top griddle) and prepared the garnishes.  Madeline does not get to help with things that are sharp or hot.  Soon enough it was time for dinner and we all enjoyed our corn-on-the-cob and vegan cheeseburgers. For dessert we had some more of the chocolate cake that we made yesterday with fresh strawberries.

We spotted this young bunny along the boardwalk at the Brighton Mill Pond.

We spotted this young bunny along the boardwalk at the Brighton Mill Pond.

After dinner I cleaned up the dishes and we went out on the deck to sit in the chairs and enjoy a near perfect Michigan summer evening while we watched the bunnies eating grass.  Around 7:15 PM we watched another Sesame Workshop DVD.  This one was on Shapes and Colors.  It was over by 8 PM and Madeline started getting ready for bed which was a very jovial affair.  First the potty, then jammies, then tooth brushing followed by finding blankies, “bebes” (pacifiers), and stuffed animals, all the while laughing and giggling.  Linda finally got her to sit quietly and read her a story which calmed her down enough to go to bed.  If her thoughts drift to her mommy and daddy she will get weepy—it’s part of being two and a half—but we have been successful on this visit keeping her engaged enough to avoid anything more than some occasional brief tears.

Madeline washes the strawberries.

Madeline washes the strawberries.

We split the remainder of a bottle of Leelanau Cellars Winter White wine we had opened some time ago but had vacuum sealed and it was still fine.  Linda finished the dishes and loaded the dishwasher while I filled in the day’s details on this blog post.  Both cats came out of hiding and sought our attention.

We have been hearing fireworks, and/or gunfire, for many weeks now and today was no exception.  Two nights ago someone in the neighborhood was firing off, or shooting, something until well after midnight.  There were more fireworks tonight, as expected, and the activity intensified after 9 PM as dusk gave way to night.  The cats were not completely relaxed about the noise but seemed to tolerate it.  As far as we know Madeline slept through all of it as she is a very sound sleeper.

 

2015/07/03 (F) 4th Anniversary

Leave a reply

Several SLAARC members were gathering at 10:30 AM this morning to unload the Field Day equipment from Steve’s trailer and store it in the South Lyon water tower.  I was going to join them but decided last night to stay home and work on the design for the desk and HVAC chase covers for our motorcoach.  Having played ham radio for much of the last week and a half I needed to refocus my time and attention on the interior remodeling of our bus.  Besides, Brendan was bringing Madeline to our house sometime mid-to-late morning and I wanted to be home when they arrived.  Today was Brendan and Shawna’s 4th wedding anniversary and they asked Linda if we would take care of Madeline for a couple of nights so they could have some time together without the constant demands of child care.  Of course Linda said ‘yes.’

I had a call last night from XPO Delivery Services letting me know the new refrigerator for the bus would be delivered to Chuck Spera’s shop in Novi today between 6 and 8 PM.  That meant I would have to be at the shop by 5 PM just in case they arrived early and could be there past 8 PM if they arrived late.  At 7:45 AM this morning I got a call from the Lowe’s in Howell asking if XPO could deliver the refrigerator in about an hour.  Sure, why not; I was still in bed but about to get up anyway and having the refrigerator delivered early would actually open up my entire day.  I hurried the process along, had Linda get the receipt, grabbed my iPad, and headed for Chuck’s shop in Novi.  Linda was getting ready to go for a walk as I left.

One never knows what the traffic will be like on I-96 headed into the Detroit metro area from the northwest but on this Friday, at the start of a major holiday weekend, the traffic was very light and I was able to get to Novi in the minimum legal time.  Traffic headed westbound actually appeared to be heavier than the inbound traffic.  I stopped at the Tim Horton’s on Beck Road just north of Grand River Avenue and got coffee which I had not taken the time to make at home before I left.

I texted Chuck to let him know that the refrigerator was being delivered this morning.  He called me back to clarify where to have them set it.  This would be a great weekend to do the swap as all of the other businesses around his shop building will be closed for the holiday, making it easy to get our bus in and out.  But his daughter arrived last night from New York and will be visiting for a week so the refrigerator replacement will have to wait, probably until at least next weekend.

By 9:30 AM XPO had not arrived so I called Lowe’s in Howell and talked to Erica in scheduling.  She said she would call the driver and see what was going on.  I texted a status update to Linda and continued to wait.  By 10 AM there was still no truck and no call back from Erica.  At 10:20 I was dialing Lowe’s again when an Enterprise rental truck drove past the building headed east and a few minutes later went by headed west and pulled into a parking lot.  Moments later my phone rang.  It was the XPO truck driver.  I explained where the driveway was and flagged them in.  When I ordered the fridge I gave detailed special instructions on how to find the building but the driver did not bother reading them and did not bother calling me until he had failed to find the delivery location for the second time.

They backed the truck into the area in front of Chuck’s garage door, lowered the refrigerator down on their lift gate, slid a pair of lift straps under it, picked it up, and carried it into the shop.  I looked it over as best I could and then signed for it.  Only later did I notice a small dent towards the bottom of the door.  I had an automated call later asking if I was satisfied with the delivery and indicated ‘no’, noting the arrival delay and the small ding.  The message said I would hear back from someone within an hour but no one ever called.  We do not plan to make an issue of the ding as we will be lucky to get it into the bus and into its alcove with no further damage.  Still, it should have arrived in perfect condition and did not.

I called Linda to let her know the refrigerator had arrived and that I was getting ready to head home.  She said Brendan had just arrived with Madeline.  As I started to back out of my parking spot Chuck arrived so I spent about 30 minutes talking with him about the timing and approach of the refrigerator swap.  I will almost certainly take our bus to his garage on a weekend.  Only later did I find out that Brendan will not be available to help for the next two or three weekends.  Ugh.  Chuck called a friend (golf buddy) who has narrow pallets (24″) to see if he could get a 5’ long section.  With the long forks set close together on his forklift we can slide the pallet over the forks and have a much more secure platform form for raising and lowering refrigerators, probably laying on their backs.

Linda called back and asked me to stop on the way home for some toddler toothpaste and a toddler toothbrush.  I did not know they made such things but I found them at the CVS in Brighton.  Not long after I got home Linda had lunch on the table.  She heated some veggie nuggets and set them out along with baby carrots, grapes, pretzels, hummus, vegan deli slices, bread, lettuce, and onion.  We all had a good lunch with lots of variety.  Brendan got Madeline down for her nap at 1 PM and hung around long enough to make sure she was asleep.  I took a few minutes to show him the new Yaesu radio before he headed back to Ann Arbor.

I was very tired and took a nap on the living room sofa which is especially comfortable for this purpose, better actually than for sitting on.  Madeline slept until almost 4 PM.  When she woke up she wanted her mommy and daddy and was a little weepy but Grandma Linda got her quickly engaged in doing things.  Linda took her for a walk to see the chickens while I went downstairs to check e-mails.  I responded to ones having to do with the transfer of the SLAARC website and domain name registration from GoDaddy.com to QTH.com and made mental note of others.  When they got back from their walk Linda brought Madeline downstairs to see Grandpa Bruce at work in his office and ham radio shack.  We told her we would help her become an amateur radio operator when she was older.

Linda decided that baking a vegan chocolate cake would be an excellent activity to do with Madeline and give us a nice treat for later.  Madeline helped pour and stir ingredients.  She ended up with chocolate cake batter on her face and clothes but it was worth it as she got to lick one of the spoons.  (Without any animal products, especially raw eggs, vegan cake batter is perfectly safe to eat.)  Linda had previously found a small baking set for Madeline that included a small bunt cake pan.  Some of the batter went in there to make a little cake just for Madeline and the rest was used to make 11 cupcakes.

After the cupcakes were cooked and taken out of the oven to cool Linda made dinner.  We had mock chicken strips (vegan), fresh sautéed green beans, vegan refried beans, and fresh berries leftover from earlier.  When the cakes were cool enough Linda got out the powdered sugar and sifter and we dusted them.  Madeline enjoyed the decorating but somehow ended up with powdered sugar in her hair, on her dress, and all over her face.  I took pictures and then Linda cleaned her up while I cleaned the floor.

After dinner and dessert we played and read a bit.  Linda had gotten three Sesame Street Workshop DVDs from the Howell Public Library so we all climbed up into the bed in our bedroom and watched one of them.  We played along with the various activities and games and encouraged Madeline to do the same.  The program ended at 8 PM which is Madeline’s bedtime.  Linda helped her in the bathroom, got her into her pajamas, and helped her brush her teeth.  She laid down without a fuss and drifted off to sleep. We stayed up until the last chime of the grandfather clock at 9:45 PM and then turned in for the night.  We are always satisfyingly tired after a full day of Madeline.

 

2015/07/02 (R) 100,000 Radios

Leave a reply

We were tired and did not get up until almost 8 AM.  Linda prepared a tofu scramble for breakfast, as we were almost out of her homemade granola, and served it with some cinnamon raisin toast and fresh grapefruit.  It’s the closest thing we eat to scrambled eggs and she serves it as an occasional change of pace from our standard granola breakfast.

I had my annual appointment with my dermatologist this morning at 11 AM.  I needed to pick up a cable from Scott (AC8IL) at Adams Electronics, which was on my way to the Henry Ford Health System (HFHS) clinic, so I left the house a little after 9:30 AM.  The drive was fine initially and I had a nice QSO (chat) with Steve (N8AR) on the South Lyon 2m repeater.  As I was approaching Wixom Road, however, all lanes of eastbound I-96 were stopped.  I was able to exit at Wixom Road and headed north a short distance to West Road which I took east over to Beck Road where Scotty’s business is located a little north of West Road.  I had a brief chat with Scott about the antennas on my tower before I left.

Two miles north of Scott’s shop I turned east on Maple Road (15 Mile Road).  The HFHS has many clinics around the greater Metro Detroit area and my dermatologist is located at the intersection of Maple and Farmington Roads in West Bloomfield.  That should have been an easy trip but there was construction on Maple Road that had the road down to one lane with flaggers.  There were signs advising motorists to seek other routes but I did not heed the warning.  I patiently worked my way through and arrived for my appointment about seven minutes ahead of time.  Good thing I left as early as I did.

My exam was fairly routine and Dr. Nydorf wrote out a prescription for Doxycycline.  I will try taking it (again) three times a week and see if it helps.  I headed straight for home after my appointment but took a different route.  Once I was back at the house Linda went for a walk.  While she was walking I removed the license plate from her car, took the protective (anti-theft) cover off, and cleaned everything.  When it was dry I put the new registration sticker in the corner, reassembled the cover, and installed the plate back onto the car.  I then started working with the various pieces of the new Yaesu FTM-400DR/DE mobile radio.  When she got back from her walk she heated up a couple of tofu hotdogs for lunch.  These are such simple fare but so tasty (with mustard, onions, and relish) and so appropriate for a summertime lunch.  They are also a really easy lunch to get on the table.

After lunch Linda took her car to the Howell library to get some books and children’s DVDs and then stop at the Meijer’s supermarket to pick up a few grocery items for Madeline’s visit this weekend.  While she was running errands I assembled our new Diamond X-300NA antenna.  Once it was assembled it was over 10 feet long so I stored it by mounting it to the side of the tower.  I put it up as high as I could reach from the ground to get the three counterpoise (elevated ground plane) rods above eye level.  Moving it to the top of the tower as a replacement for the Diamond X-50NA will have to wait until next week or later.  The exact timing will depend on the weather, Mike’s (W8XH) availability, and whether I have acquired appropriate standoffs by then for the X-300 antenna and/or the cellular booster omnidirectional antenna.

With the antenna taken care of (for now) I disconnected the coaxial cable for the X-50 from the radio side of the lightning arrestor and positioned it so I could pull it back into the sump pump room.  From there I fed it into the ham shack, disconnected it from the radio, and coiled it up.  I uncoiled the new 20′ LMR-400 cable with the N-male connector end positioned so I could feed it through the corner of the ceiling in the ham shack (by the ground wire) and into the sump pump room.  From there I fed it through one of the 2″ conduits into the cable entry box.  Back outside I shaped the cable (LMR-400 cable is double shielded and stiff) and connected it to the radio side of the Morgan VHF/UHF lightning arrestor and closed the lid on the box.

Back in the ham shack I attached the PL-259 connector to the SO-239 socket on the back of the Icom IC-7000 GoBox.  I could have gotten away with a 16′ cable but the 20′ length gives me more flexibility with respect to equipment placement.  I turned on the IC-7000 but did not hear anyone on either the South Lyon 2m or the Novi 70cm repeaters so I turned it off.

I disconnected Mike’s Icom IC-2820H and set it aside to make space for the new Yaesu FTM-400DR/DE dual band mobile transceiver.  I moved the new coax to the new radio, powered it up, spent a few minutes configuring some basic things, and then listened to the South Lyon and Novi repeaters.  I tried calling them but was not triggering them so I knew the PL Tone was not set correctly.  I called Mike for assistance and left him a voice message.

Linda was back by this time so she came down to see the new radio.  We then went out to the bus to make our final decisions about upholstery fabric and window shade materials.  In the end we chose the Lambright Notion Linen fabric for all four chairs and the MCD B50 material for the dark out shades.  We brought all the samples back in the house and I e-mailed our choices to Josh at Coach Supply Direct.

I had an e-mail from Scott Neader (KA9FOX) at QTH.com requesting an admin login for the SLAARC WordPress website so I set that up and e-mailed him back.  I had the new radio on and was listening to a conversation on the Novi repeater.  It had just concluded when Mike returned my call.  He walked me through how to set up the PL Tone and Squelch Tone for both of the repeaters on the FTM-400.  We were then able to verify that the radio was working on both bands.

For dinner Linda made a salad and pan-grilled tofu with caramelized onions and barbecue sauce which she served open-faced on hamburger buns.  We had watermelon for dessert, which we have been doing a lot this summer.  I did not care for watermelon as a child but it has become a favorite summertime treat.  I had dropped a small lock washer while mounting the new antenna to the tower earlier so I went to Lowe’s to get a replacement and some spares.  On the drive there I got a call from XPO Delivery Service letting me know that the new refrigerator for the bus would be delivered to Chuck’s shop in Novi tomorrow between 6 and 8 PM.

At Lowe’s I picked up some 6mm x 1.0 Nylok nuts in addition to the lock washers.  I also got some grass seed patching mix, a few more bags of decorative broken brick pieces, and a hummingbird feeder with a red reservoir so Linda can use sugar water without red food coloring.  When I got home the odometer on my car read 100000 so I took a picture of it with my phone.  I then spread the patching mix over the bare dirt I had used to fill a hole and troughs left by the installation of the natural gas line to our house last September.  The rest of the evening Linda read and I worked on completing drafts of blog posts.

 

 

2015/07/01 (W) Coach Supply Direct

Leave a reply

We were up at 7 AM and left at 7:45 to drive to Coach Supply Direct in Edwardsburg, Michigan.  On the out of town we stopped at Teeko’s Coffee and Tea for coffee and bagels to go.  The coffee was single origin Kenya and was very good.  We drink half-caff at home so I will check with Jeff to see if this also comes in a decaffeinated bean.

We took I-96 west towards Lansing and then took the Lansing Road cutoff to I-69 south.  We exited at M-60 and headed west towards Three Rivers.  Our plan was to drop down M-40 to US-12 for the final run into Edwardsburg but M-60 was closed in Minden and the detour took us south on M-66 towards Sturgis.  We were about half way to Sturgis when the detour turned west back towards Three Rivers so we continued on to Sturgis where we picked up US-12 and continued our westward journey.  We stopped at the McDonald’s in White Pigeon for a second cup of coffee and then finished our trip to Edwardsburg.

Coach Supply Direct is located on Elkhart Road just south of US-12.  It was easy to find and Josh greeted us as we pulled in.  We looked at his Lambright fabric samples again and were just not finding exactly what we wanted so Josh suggested we check out the selection at Pro-Forma (?) on the southeast side of Elkhart.  They are a major supplier of surplus yard goods in the area and he often gets fabric from them for projects.  He offered to go over with us but we did not want to pull him away from his work more than we already had.  He called to let them know we were coming without him.

We took US-12 back east to M-217 and dropped into Indiana where the road becomes County 17.  Just before US-20 we turned west and about 1.5 miles later we turned south onto Hall Road and pulled into Pro-Forma’s parking lot.  Bob (the owner) was out but we found Mike back in the warehouse.  He took us to the room with the sample books and we looked at a sample of every fabric they had but did find anything even close to what we were looking for.  Bob returned from his errand run and we commented that apparently plain off-white upholstery cloth was out of style.  Quite to the contrary, he said it is very much in use and as a result there is very little, if any, surplus coming out of the Elkhart-based RV manufacturers.

I took a different route back to Edwardsburg, driving through Elkhart on some streets I had not driven before.  After talking with Josh some more we had him do a final estimate (quote), sans fabric selections, as follows:

  • Two (2) Flexsteel 529 Class C captain’s chairs with skirts, adjustable arm rests, 8.5″ swivel pedestal with 20″ seatbelt bar, tan seatbelt, and slide tracks.
  • One Flexsteel 591 Class A driver’s captain’s chair with skirt, adjustable arm rests, and power lumbar option.
  • One Flexsteel 591 Class A co-pilot captain’s chair with footrest, skirt, adjustable arm rests, and power lumbar option.
  • 15 yards of additional fabric TBD.
  • Seven (7) MCD Duo Shades with dark out fabric TBD.
  • An estimate of a 2 to 6 hours labor to install everything.

Josh converted the estimate (quote) into an invoice and Linda wrote him a check for the requested 50% deposit.  He then let us select Lambright fabric samples to take with us.  We removed six from the binder rings and also took one of his sets of MCD dark out material samples.  I had planned to stop and visit with Michele Henry at Phoenix Paint but had not told her that we were coming so she was not expecting us.  By the time we left for home it was 3 PM so we waved as we drove past her shop.

Linda had packed food for the trip so she ate her vegan yogurt and got out the grapes for both of us to munch on.  Instead of retracing our route from the morning I stayed on US-12 all the way to Coldwater.  By the time we reached I-69 I was hungry so I pulled into the Walmart.  I ate my yogurt in the car and then we went in to buy Snyder’s sourdough pretzel nibblers, Blue Diamond Wasabi Soy almonds, and some mini-strudels (apple and cherry) that did not contain any animal products (according to the label).  We got on I-69 going north and I exited at M-60 for fuel.

We got home around 6:45 PM.  UPS had delivered the order I placed yesterday with Amateur Electronics Supply so I brought that in from the porch and set it aside for tomorrow.  I opened one of the boxes of Armstrong floor tiles, removed a tile, took it to the bus, and set it on the floor in the kitchen.  We took the Lambright fabric and MCD dark shade samples to the bus and had an initial look at all of them together with the walnut woodwork, floor tile, and existing wallpaper (which is going to get replaced with something).  We left them to look at again tomorrow in better/different light and went in to have dinner.

Linda reheated the potato-kale curry leftovers and served some fresh watermelon.  I checked e-mail and responded to some that related to the SLAARC website.  We relaxed by watching two episodes of “First Peoples” on PBS and then went to sleep.  It was a long, tiring day with somewhere between 350 and 400 miles of driving and 7 to 8 hours of sitting in the car.  We were glad to have the chairs and shades ordered, and to have decided (for now) to go with the custom made sofa cushions, but we were frustrated by still having the fabric and shade materials undecided.  We told Josh we would have a decision by Friday so tomorrow will be final decision day.

 

2015/06/30 (T) Three Score and Five

Leave a reply

Today was a milestone birthday for Linda.  We had our usual leisurely early morning with coffee, fresh fruit, and cinnamon raisin toast (from Metropolitan Baking) for breakfast.  We talked some more about our long-term ham radio plans and decided we would order one (1) of the new Yaesu FTM-400DR/DE dual band mobile radios and a slightly more powerful VHF/UHF base station antenna.  Our daughter called around 9 AM to wish her many happy returns of the day.  My Michigan Public School Employee Retirement System (MPSERS) health insurance shifted her to secondary, with Medicare as primary on June 1st, the first day of the month in which she turned 65.

The temperature was in the low 60’s when we got up at 6:30 AM.  The weather forecast for the afternoon had an increasing chance of rain and the possibility of isolated thunderstorms so Linda went for a mid-morning walk.  I headed to my office to order the radio and a Diamond X-300NA 2m/70cm antenna.  All of the online distributors are selling the radio for the same price.  I decided to buy both products plus the RTSystems programming software, from Amateur Electronic Supply (AES).  Their UPS Ground shipping is “free” and since they are based in Ohio the shipment will be here in 1-2 days rather than 4-5 days.

I took a break and spread three more bags of brick pieces around the base of the tower and in front of the cable entry box.  Back in my office I dealt with some personal e-mail.  I sent an e-mail to Scott (KE9FOX) at QTH.com with additional information he needed to transfer the SLAARC website and domain name registration from GoDaddy to QTH.com.  I then gathered up a load of laundry and put it in the washer.

By the time that was all done it was getting close to lunch time.  Lunch was a big spinach and lettuce salad, baby carrots, a few sourdough pretzel nibblers with roasted red pepper hummus, fresh sweet cherries, and the blueberries/strawberries/raspberries that were left from breakfast.

After lunch I transferred the laundry to the clothes dryer and then got cleaned up.  We left around 3 PM for the U.S. Bar and Grill in Wayne and stopped on the way to get a card.  Today was John Smallwood’s last day at Wayne RESA and there was a gathering from 3-to-6 PM to see him off.  John was the VP of the Wayne County Salaried Staff Federation (WCSSF) and succeeded me as President of the local when I retired.  Now it was John’s turn to enjoy a well-earned and well-deserved retirement.  This was the second gathering for a colleague in the span of just over a month.  Besides wishing John well it was an opportunity to reconnect with other former colleagues.

After a suitable amount of time visiting at John’s party Linda and I drove to the Mongolian Barbecue in Novi for a celebratory birthday dinner.  It is a very noisy restaurant but was not as bad on a Tuesday evening as it was the last time we were here on a Saturday.  I would have preferred a quieter and more relaxing atmosphere, but the Mongolian Barbecues have a lot of ingredients that we can eat and we find the method of preparation very much to our liking.  By the time we had a small bowl of soup, a moderate sized salad, and a good size bowl of ingredients we were full.

I had a brief QSO with Chris (K8VJ) on the drive home.  I stopped at the Shell station and topped off the gas tank in my car so we would be ready to go in the morning.  We finally got home at 8:30 PM.  Linda made some hot tea and we each had a piece of Prickly Pear Cactus Jellied Candy.  I restarted the dryer on Touch Up and checked my e-mail.  We were tucked in by 10 PM as we needed to be on the road by 7:30 AM tomorrow.

 

2015/06/28 (N) Field Day Teardown

Leave a reply

I was up at 7:15 AM and showered.  The rain finally cleared out leaving blue skies but with scattered white clouds still blowing across the region on brisk winds out of the NNE.  Linda was up by 8 and got the fresh fruit ready for our breakfast cereal while I made the coffee, which we enjoyed in the living room to warmth of the natural gas fireplace.  I did not expect to be using the fireplace this time of year but we have the furnace turned off, and are still getting overnight lows in the 50’s, so the fireplace is an effective and charming way to alleviate the slight morning chill in the front of the house.

In spite of the weather the food tent stayed up and open for business.

In spite of the weather the food tent stayed up and open for business.

I finished up the draft of my blog post for yesterday and started on this one while I drank my coffee.  By 9:45 AM I was ready to install the #6 green coated ground wire I bought last night.  I also decided to switch out the coax from the cable entry box (CEB) to the ham shack.  Linda had made a grocery list and left to do the shopping.

Outside I opened the CEB and disconnected the current VHF/UHF coax and let it slide back into the sump pump room (SPR).  Inside I removed the suspended ceiling tile in the northeast corner of the ham shack and routed the ground wire over the wall into the SPR.  I fed it through an existing cable tie on the bottom of one of the floor joists and through the outer wall into the CEB.  I had an unused copper ground lug and used it to connect the ground wire to the lower right mounting stud for the CEB copper backplane.

Back inside I uncoiled a length of 50 ohm coax that I borrowed from Mike (W8XH) and followed the same path as the ground wire.  Outside at the CEB I installed an N-male/SO-239(F) adapter onto the PL-259 connector on the end of the coax and attached it to the N-female socket on the lightning arrestor.  I was finished working in the CEB, closed the cover, and went back to the basement.

I decided to install the 36″ copper ground bar on the wall behind the ham shack desks just below the 120 VAC outlet strip, which required me to move the desks away from the wall.  I attached the end of the ground wire to one of the studs by spreading the strands and placing them under a washer and wing nut.  I need to get another copper lug to do this right.

Steve (N8AR) operating the 6m opening from the radio in his car.

Steve (N8AR) operating the 6m opening from the radio in his car.

I had a five foot length of braided tinned copper strap and used it to connect the ground terminal on the Go Box to the ground bar.  I spread the braid apart to make a small hole near each end, slipped the holes over the studs, and clamped them under washers.  This was a temporary arrangement for testing purposes.  I need to configure a length of #10 copper wire with a ring terminal on one end and a make spade connector on the other but did want to take the time to do that today.

With everything hooked up I called Mike (W8XH) to see if he was available for a quick radio test.  He was still at home and about to leave for the SLAARC Field Day site but gladly delayed his departure long enough to help me test the new configuration.  The result was a better send and receive signal on 2m, both direct and through the South Lyon K8VJ repeater, with an S3 received signal strength with the pre-amplifier turned on.  The direct signal was also a little better on the 440 MHz band but my received signal from the Novi repeater was still weak and noisy and my transmit signal was still not strong enough carry the repeater.

I had planned to leave around 11AM for the SLAARC Field Day site but wanted some lunch before I left.  I had just made a sandwich and was gathering up my equipment when Linda got back from her grocery shopping.  By the time I left it was past noon.

I was interested in our ham radio club’s participation in this year’s ARRL Field Day event but neither Linda nor I had had any need or desire to operate radios.  I worked all day Friday on the setup of the towers and antennas and helped a bit last night with the emergency teardown of the VHF/GOTA canopy.  The 24-hour Field Day operating window closed at 2 PM today but some of the teardown began before that time and I wanted to be there to help.

SLAARC members enjoying lunch outdoors at the Field Day site.

SLAARC members enjoying lunch outdoors at the Field Day site.

Some teardown was already underway when I arrived at the SLAARC Field Day site and lunch was also just being served, so everyone took a break to get something to eat except Steve (N8AR).  He was sitting in his car making contracts on the six meter (6m) band using the mobile radio in his car.  He had connected it to the 6m beam antenna on top of the big tower.  The 6m band is known as “the magic band” because it will suddenly “open” and allow very clear communication over great distances and then just as suddenly close.  It had apparently opened up this morning from the Mississippi River to the East Coast and south into the Caribbean.  One of our members made a contact with someone in the Dominican Republic.  While I was watching and listening I heard calls coming in from South Dakota and New Mexico.

This is the fourth year that Marianne Roney, the wife of one of club member Ed Roney (KD8OSM), has taken care of the Field Day meals, which include lunch and dinner on Saturday and breakfast and lunch on Sunday.  The meals are $5 per person per meal, which is a bargain for the variety and quantity of things she prepares and provides, except that there is typically very little we can eat.  She would make special provisions for us if we asked (she did the first year) but it is extra work for her and we are still left with not being able to eat most of what is available, so we do not purchase meals.

Operating stations are often staffed by two people, one operating the radio (left) and the other logging the contacts (right).

Operating stations are often staffed by two people, one operating the radio (left) and the other logging the contacts (right).

As the operating event was drawing to a close the computer in the 40m tent shut down.  The computers are not used to operate the radios, but are connected to them and are used to log the contacts using the N1MM Logger+ program.  The program reads key information about frequency and mode from the radio so all the logger has to capture are call sign, operating category, and section.  (Club member Larry, K8UT, is a member of the N1MM Logger development team.)  Every radio was paired with a laptop computer running this program, and the computers were all linked together via Wi-Fi.  As a result, the operators/loggers at each station could see all of the contacts that were being made regardless of which station made the contact and each computer contained a complete list of contacts.  The program also flags “dupes” (duplicate contacts).  In a contest situation this allows the operator to see that they have already worked that station on a particular band and mode and not spend time working it again on the same band and mode as duplicate contacts do not contribute to the contest score.

Just as it had started 24 hours earlier, at 2 PM it was all over without any fanfare.  The radios and computers were shut down and then the AC power generator was shut down.  Cords were unplugged, coiled, and staged near the vehicles they would eventually be loaded into.  Radios and computers were carefully disconnected, boxed (in some cases) and carried to the vehicles of their respective owners.  Tarps were pulled from the tents and folded and then the tents were collapsed and folded.  Four of use took down the 40m crossed dipole (inverted V) antenna and then took down the small support tower and disassembled it.  A larger crew eventually lowered the bigger tower, which required a winch, until it was resting in a step ladder.  This was necessary because of the two beam antennas at the top of the tower.  They removed the 6m and then the 20m beam antennas and then lowered the tower to the ground.  Part of the crew disassembled and packed the two beam antennas while the rest of them took the tower apart

A path map from Eric's (K8ERS) cell phone of the early morning 6m band opening.

A path map from Eric’s (K8ERS) cell phone of the early morning 6m band opening.

We were essentially done with the teardown by 4 PM.  The teardown is always much faster than the setup and yet it was very relaxed and went very smoothly.  In spite of weather challenges all day Saturday and overnight into Sunday, and the disappointment of not having all of our stations on the air due to losing tents to the wind, we had a beautiful last day for the event and teardown.  Blue skies, white puffy clouds, cool temperatures, lighter breezes, and low humidity combined with a sufficient number of competent, helping hands, made for easier work for everyone.  The group stood around reflecting on the event and everyone was in a good mode, a sure sign that the 2015 ARRL Field Day had been a success for the South Lyon Area Amateur Radio Club.

I was the last one to pull out, right behind Steve who was towing a fully loaded enclosed trailer with a lot of the club’s equipment in it and on it.  We chatted via the South Lyon repeater on the drive home, our last radio work for the day.  I was home by 5 PM and just relaxed until dinnertime, tired from the sun, fresh air, and work.  For dinner Linda made a potato and spinach curry dish that she found in her Indian cookbook.  She also steamed some asparagus that she bought at the Howell Farmers Market this morning.  We had a quiet evening of reading, writing, and games before turning in at 10 PM.

 

 

2015/06/27 (S) ARRL Field Day

Leave a reply

At 5 AM I was vaguely aware of the sound of rain.  The cats were chasing each other through the house so I got up to make sure nothing was amiss, such as another mouse.  They were just having a bout of morning friskiness.  I added a little food up to their bowls, which drew their attention, and went back to bed.

My Amateur Radio vanity license plate. There were a LOT of these in the parking lot at the SLAARC Field Day site.

My Amateur Radio vanity license plate. There were a LOT of these in the parking lot at the SLAARC Field Day site.

I finally woke up and got up about 8:15 AM and got dressed in a suitable manner for today’s American Radio Relay League (ARRL) Field Day event.  The temperature was in the mid-50s, overcast and raining with blustery winds; not exactly the nice summer day we were all hoping for.  Some of the members of the South Lyon Area Amateur Radio Club (SLAARC) were gathering for breakfast at the usual place (Senate Coney Island) at the usual time (8 AM) but we obviously did not join them today.

I went to my office to retrieve my Sony DSLR and decided to turn on our Icom IC-7000 ham radio.  I had it tuned to the SLAARC (K8VJ) repeater in South Lyon when Keith, KD8YYJ, announced his presence.  He was driving from the west side of Howell to Wixom and seeing what repeaters he could hit.  We chatted for 10 to 15 minutes and I invited him to stop by the SLAARC Field Day site at the South Lyon Township James F. Atchison Memorial Park.

I worked all day yesterday as part of the SLAARC Field Day setup crew.  There was more setup to do starting at 9 AM this morning but the setup mostly involved radios, computers, Wi-Fi networking, and power.  I was not in any humor to rush off into the clammy weather conditions, and Linda was up by this point, so we had breakfast.  She found some Silk brand ‘yogurt’ at Meijer’s last week so we had that.  It was OK.  It is a creamy style yogurt, which is not my preference, but it was tasty enough.  Bananas, cinnamon raisin bread, and juice rounded out the meal.  Linda even made the coffee.  I turned on the natural gas fireplace to ward off the chill in the living room where we lingered and enjoyed our morning brew.

The SLAARC Field Day operating stations use wirelessly networked computers (left) running N1MM Logger+ to record the contacts that are made. HF transceiver to the right.

The SLAARC Field Day operating stations use wirelessly networked computers (left) running N1MM Logger+ to record the contacts that are made. HF transceiver to the right.

I finally left for the Field Day site around 11 AM.  The operating event started at 2 PM but the first of four meals was lunch today at noon and I wanted to capture photos of the rest of the setup and the lunch event.  It was raining lightly when I arrived and continued to rain until I left at 2:15 PM.  In between arrival and departure I took some photos and helped out a little bit, but there were plenty of people there taking care of what needed to be done.

Mike (W8XH) brought his Icom IC-2820H dual band mobile radio and several lengths of 50 ohm coax and we transferred those to my car.  He then walked me through the various menus and functions his new Yaesu FTM-400DR/DE radio, a dual band (VHF/UHF) 50 Watt rig with digital voice capability and a color touch screen display.  A group of SLAARC members recently purchased a Yaesu DR-1X repeater that works with the new Yaesu digital voice and data modes in addition to the traditional FM mode and are testing it as a replacement for the current, and very old, K8VJ repeater.

Mike’s IC-2820H is available for $350 but the FTM-400DR has a $100 rebate through the end of June, bringing the price down to $500.  As much as I would like to have a VHF/UHF radio in my car I am looking at one of these radios to install in the cockpit of the bus so we can use it going down the road.  The long-term plan is to put the Icom IC-7000 HF/VHF/UHF radio in our towed vehicle and get the Hi-Q 80-6 antenna mounted and operational in addition to the Diamond SG-7900 VHF/UHF antenna that is already on the Honda Element.

For base station use I would like to get an Elecraft K3s or Flex SDR rig.  The K3s has become the rig of choice among the members of the SLAARC who are serious about working HF and contesting.  Either of those are radios that could be fairly easily moved from the house to the bus when we travel.  Antenna options in the bus could include running coax to the Hi-Q on the toad and/or a “flagpole” HF vertical that is mounted using the towbar receiver or a base stand that goes under one of the tires.  An antenna switch would allow the use of the VHF/UHF antenna that was already installed for the cockpit radio.  All of these “base station” options would obviously be for stationary use only.

[Photo 3 – HC]

The ARRL FIeld Day event showcases the ability of amateur radio operators to set up equipment in the field on short notice and keep it on the air for 24 hours, no matter what. The weather turned bad for the event. The portable generator is under the tent in the right foreground.

The ARRL FIeld Day event showcases the ability of amateur radio operators to set up equipment in the field on short notice and keep it on the air for 24 hours, no matter what. The weather turned bad for the event. The portable generator is under the tent in the right foreground.

I uncoiled the coax cables that Mike lent me to see how long they were.  There was a 5 foot piece that was too short for what I needed, and a piece that was approximately 40 feet, which was longer than I needed.  The third piece was at least as long as the 40 footer.  I “tagged” his coax with small white cable ties so I could identify them later and return them to him.

I did not want to mess around switching coax cables in the rain so I unboxed Mike’s Icom 2820 and got it set up to use with my existing antenna and transmission lines.  I spent a little time with the manual and then powered it up.  It was already configured from when Mike used it in his ham shack so I did not need to do any setup to use it.  I monitored both the South Lyon 2m and Novi 440 MHz repeaters and was able to “hear” both of them, although the South Lyon signal was much better (stronger, quieter, clearer) than the Novi.  A couple of SLAARC members were on the South Lyon repeater taking care of Field Day business.  I waited a suitable amount of time after they were done and called for Mike (W8XH) and he came back right away.

We repeated the testing we had done last night.  The performance with the 2m South Lyon repeater seemed to be much better but the performance on the 70cm Novi repeater was the same or worse with a fading component to the noise.  I think we were on the air 15 to 20 minutes.  Based on the test results from last night and this afternoon I think I have two separate issues that are probably interacting; the IC-7000 needs to be grounded and the 25 feet of coax from the cable entry box (CEB) to the radio (Go Box) needs to be shorter and much higher quality.  I need to install the ground bar on the wall behind the ham radio desks and then purchase a suitable length of ground wire and run it from the CEB to the copper ground bar.  I will also need to get a 15 foot length of 50 ohm LMR-400 coax from Scott (AC8IL) with an N-male connector on one end and a PL-259 connector on the other end.

Linda prepared our dinner at 5 PM.  She made corn-on-the-cob and “cowgirl steaks,” a new (to us) vegetable protein product she found at Meijer’s.  After dinner we drove back to the SLAARC Field Day site to socialize with club members at dinnertime.  The weather at our house was still rainy with light-to-moderate winds and occasional stronger gusts.  We arrived at the Field Day site to find a flurry of activity and strong, steady winds out of the north with continued sporadic rain.

Jim (KC8WMW) stays dry as he works the GOTA (Get On The Air) station in one of the tents.

Jim (KC8WMW) stays dry as he works the GOTA (Get On The Air) station in one of the tents.

The small red tent that was originally supposed to be the VHF tent was nowhere to be seen and at least eight people were engaged in trying to control and fold up the large canopy that the club purchased yesterday at Costco to serve as the combined VHF and GOTA tent.  We quickly learned that the small tent, which was not being used, had collapsed and the large tent, which was unoccupied but full of radios and computers, had come unstaked and blown over in the wind.  Those who were not helping with the equipment canopy were gathered in the food canopy.  I pitched in on the equipment canopy rescue and Linda took the camera and joined the folks in the food tent.

After gathering up all of the pieces of the canopy and getting them back in the trailer some of the team added extra ropes and stakes to the windward end of the food canopy and both the 20m and 40m tents.  Another part of the team, including me, got Marty’s (KB8JIU) satellite tracking equipment out of the screen room, which had been draped with solid plastic tarps to keep the rain out, and then took the room down, disassembled the legs, folded it up, and stuffed it in the trailer.  The red tent was stuffed under a picnic table that was in the screen room so I grabbed that and put it in the trailer.  The support pole for one end of our off-center-fed dipoles was bending over to the south more than we liked.  Steve, N8AR, tied a rope around the existing rope, which was inline with the antenna and being used to keep it taught.  He slid the second rope up the first one as far as he could get it to go and then pulled it out to the northwest (the antenna was oriented east-west with the tension rope running east off of the east end).  He pulled it out until the support pole was reasonably vertical and I staked it down.

The winds really howled out of the north driving the rain before them. This shelter (from Costco) did not survive along with another tent and a screen room.

The winds really howled out of the north driving the rain before them. This shelter (from Costco) did not survive along with another tent and a screen room.

So the bad news was that some of our Field Day setup had not survived the weather which had not even reached severe conditions.  The good news was that our generator was still producing power, all of our towers and antennas were intact and functional, we had our two key stations on the air, and our food canopy was full of people and hot food.  Not the Field Day everyone had hoped for, but a great opportunity for teamwork and camaraderie and a learning experience to be sure, even if it was not the kind of lesson we wanted to learn.

We left around 7:30 PM and went to the New Hudson Lowe’s, which was very close to our Field Day site, where I bought 18 feet of AWG 6 stranded copper wire with a green sheath.  As soon as the weather improves I plan to run this from the CEB to the ham shack and use it to connect the ground bar in the shack to the copper backplane (ground plane) in the CEB.  I will then connect the ground on our Go Box (Icom IC-7000) to the ground bar and see if it helps with my noise issue.

Back at the house Linda wanted to watch an episode of NCIS Los Angeles, which we can now do thanks to our new OTA TV antenna.  We then watched an episode of Christina Cooks, Christina Perillo’s vegan cooking show from a decade ago.  These are still relevant and useful episodes and we especially enjoy them having seen and met her and her husband Robert on our two Taste of Health Holistic Holiday at Sea vegan cruises.  Linda read and I wrote for a while before lights out and off to sleep.

 

2015/06/26 (F) Field Day Setup

Leave a reply

I was up at 7 AM and ready to leave for breakfast with the other SLAARC members who would be setting up our temporary field site for the ARRL Field Day event.  I called the SLAARC repeater and Steve (N8AR) came back and wanted to know if I had the site use permit from the township?  No, I did not.  Paul, N8BHT, got on the air and said he gave it to Linda so I went back home.  Linda was up but had no recollection of receiving it.  We looked through the materials she got from Paul but could not find it.  I left again for breakfast but after more radio QSO went back a second time to retrieve all of the records and bring them with me to the field day site.  (Our best guess is that he gave the permits to the other Linda (NF8C) who is the club secretary.

SLAARC's Field Day setup begins in earnest when Steve's equipment trailer arrives.

SLAARC’s Field Day setup begins in earnest when Steve’s equipment trailer arrives.

By this time it was too late to make it to breakfast so I stopped for coffee and fueled my car.  Mike (W8XH) also did not go to breakfast with the group in South Lyon so we were the first to arrive at the site.  Another 10 guys showed up shortly thereafter.  John’s Sanitation then arrived and dropped off our rented porta-potty.

We had 12 people for most of the day and 14 total who were there for at least part of the day.  It was a good group and just the right size for the task.  We worked steadily from 9 AM until almost 5 PM except for an early afternoon lunch break.  By the end of the day we had erected two towers and set up six antennas (20m beam and 6m beam co-located on the taller tower, two off-center fed dipoles from the taller tower, a 40m crossed dipole from the shorter tower, and a 40m 1/4 wave vertical with four elevated counterpoise wires).  We also put up three radio tents, a screen room, and the big food tent.

Larry (K8UT) holds the 6m beam while Steve (N8AR) and others attach the 20m beam to the mast of the taller tower.

Larry (K8UT) holds the 6m beam while Steve (N8AR) and others attach the 20m beam to the mast of the taller tower.

The weather was cloudy and dull and not the best for taking photographs but I took pictures anyway.  I had to be deliberate in my shot selections, however, as both of my memory cards were almost full.  All of the work that needed to be done today was finished by 4:30 PM and most of us took off.  Our Field Day chairman, Paul (KD8SNZ), and a new member, Ron, setup their tents as they would be spending the night and keeping an eye on the site.  Steve (N8AR) and Eric (K8ERS) stayed a bit longer to test the antennas using the mobile radio in Steve’s SUV.

Back home I took a nap for an hour before dinner.  Linda grilled Portobello mushrooms and corn on the cob and cut up some fresh strawberries and cantaloupe.  After dinner I went to my office and transferred all of our recent photographs from the Sony alpha 100 DSLR to my computer and then to our older NAS device which we had with us this past winter.  I then started backing up all of the photographs we had taken since December 2014 from the old NAS unit to the new one.  This involved a significant number of images, a lot of gigabytes of data, and took a bit of time.

Rather than sit around waiting for file transfers to finish I decided to turn on the Icom IC-7000 ham radio and see if I could figure out why I could not hear the Novi 440 repeater on Wednesday when we tested the antenna and coax installation.  I checked the Nifty guide for the Icom IC-7000 and, as Mike had suspected, I did not have the Tone Squelch frequency set correctly for the Novi repeater.  I changed the mode on the 440 MHz band from ‘Tone’ to ‘TSQL’ and then caIled Mike (W8XH) on the phone to see if he could help me do a radio check.  We spent about an hour going back and forth between the Novi and South Lyon repeaters.

With the correct settings I was able to work both repeaters although I had a lot of background noise (static).  I played with the noise reduction (NR) and pre-amplifier functions and both seemed to help.  Mike tried various combinations of power and simplex operation and we determined that the basic problem seemed to be a weak signal in both directions.  I am still suspicious of the fact that I do not have the Go Box grounded as I vaguely recall from three years ago having noise problems with this setup until I grounded the box, which is tied to the radio ground.

Field Day is an "all hands on deck (antenna)" event for our SLAARC group.

Field Day is an “all hands on deck (antenna)” event for our SLAARC group.

Mike was suspicious of the coax I used to go from the lightning arrestor to the radio but looked up the specifications on my Diamond X-50N antenna and suggested that an antenna with more gain might be in order.  We also discussed the location where I placed the antenna on the tower.  Although most of the antenna is above the tower it is on the northwest leg.  The two repeaters lie to the southeast so the tower may be ‘blocking’ some of the signal although that does not seem likely to me.  Of more concern to me is that I mounted the base of the antenna so that two of the three counterpoise (ground plane) rods are even with, and parallel to, two of the three topmost crossbars.  If anything is being blocked it is likely those as the crossbars are between the rods and the repeater locations.

Ed (KD8OSM) jumped in briefly to let us know that I also had a ‘hum’ that sounded like the 60 Hz power line frequency only higher pitched.  I have a small fan installed in the back of the Go Box so I hummed the same pitch as it was producing into the microphone and both Ed and Mike confirmed that this was the tone they were hearing.  The fan is audible, but not that loud, and was two feet behind the microphone so I would be surprised if it was picking up the fan noise.  It is possible that the fan is inducing the hum electrically, but I believe it is a DC fan, so that seems unlikely.  I do not have an AC line filter installed on the fan, or anywhere in the box, so that may be a next step.

The larger of the two towers is up and secured. It has a 6m beam antenna on top of 20m beam antenna on a common mast with a rotator. We also attached one end of an off-center-fed dipole to this tower.

At the SLAARC Field Day site atop the Lyon Township Atchison Memorial Park the larger of the two towers is up and secured. It has a 6m beam antenna on top of 20m beam antenna on a common mast with a rotator. We also attached one end of an off-center-fed dipole to this tower.  Tents are being erected to house the various operating stations.  The weather was overcast and forecast to get much worse before Field Day as over on Sunday.

Mike and I wrapped up our QSO and I shut the radio off.  I checked my e-mail and saw that the May 2015 issue of Bus Conversion Magazine was available.  I logged in to the website and downloaded both the standard and high definition versions of the April and May digital editions.  By the time I got to bed it was well after 11PM.  I finished up yesterday’s blog post draft and outlined as much of today’s post as I could before I lost the sequence and details of the day’s events.

 

2015/06/22 (M) Cable Me This

Leave a reply

We turned the air-conditioning off last night and enjoyed the fresh air, pleasant temperature, and lower humidity.  The overnight low was 58 which made for good sleeping.  We awoke to blue skies and what we thought would be a picture perfect Michigan summer day until Linda checked the morning news (iPad).  There was a story about a storm that moved through the upper plains yesterday and had a bead on Michigan for later today and this evening.  What had been a 10% chance of rain for today had been replaced by a forecast for strong-to-severe thunderstorms with the possibility of strong winds, large hail, and tornadoes.  Ahhhh, summer in Michigan.

Not ones to sit around and wait for the apocalypse we did what any sensible couple would do, I made coffee while Linda reheated the last of the Baked French Toast from yesterday’s brunch.  We had breakfast and then sat on the deck enjoying our coffee and contemplating the end of the world, or at least the possible destruction of our brand new roof.  But it’s insured, so “no worries, maan” as they say in Jamaica.  More coffee please.

We have a whole house generator that runs on natural gas so as long as a storm doesn’t damage it we can survive for a very long time without electric utility power.  Losing our AT&T Internet connection, however, would be a genuine hardship as that would require us to use our Verizon Mi-Fi (without the benefit of the new Fusion5s cellular booster which I plan to install on Wednesday) or go to Panera, McDonalds, or one of the libraries to get online.

Keith showed up around 10 AM to cut the grass.  We were hoping he would make it as we have not had too much rain this past week and the last few days in particular have been dry.  I think this is the first time this season he has been able to cut our grass without it being wet.  It looked nice when he was done.

I got a call from Phil Jarrell.  He had been successful in reaching Mike Fearer of Bid Rite Concrete on Mike’s cell phone.  Based on Phil’s description Mike was interested in looking at our tower foundation project and was expecting me to call so I did, using my cell phone, and this time I was able to reach him.  It turned out that the information about his business on the Internet is out of date.  He is no longer in Whitmore Lake but now operates from near M-59 and Latson Road, not far from us.  We agreed that he would stop by tomorrow at the end of the work day to look at our project.

I did not want to do a lot of heavy work today, as I was still a bit tired and sore, but I needed to mount two lightning arrestors in the cable entry box and mount the cellular booster in the sump pump room so I could figure out what coax cable lengths I needed and go get them from Scott Adams (AC8IL) at Adams Electronics in Wixom.  But first I called Mike (W8XH) to let him know I was planning on Wednesday for the tower work, assuming he was still available and the tower was still standing.

Cable entry box showing copper ground plane with Morgan lightning arrestors (lower left), control line arrestor (center top), and cellular and OTA TV arrestors (center).

Cable entry box showing copper ground plane with Morgan lightning arrestors (lower left), control line arrestor (center top), and cellular and OTA TV arrestors (center).

I determined that I needed two coaxial cables and ordered them from Scott by phone rather than take the time today to drive to his place of business.  They will both be LMR-400 with N-connectors on both ends.  One will be 50 feet long, for our 2m/70cm Diamond X50-N VHF/UHF base station antenna, and the other will be 15 feet long, to get from the cellular booster lightning arrestor in the cable entry box to the repeater (amplifier) in the sump pump room.  I will pick them up early Wednesday morning and install them.

One of the lightning arrestors was for the SureCall Fusion5s cellular booster system.  It has N-connectors on both ends, one of which is intended for bulkhead mounting.  It came with an angle bracket that fit over the bulkhead end and I used that to mount it.  I used the 2′ length of LMR-400 that came with the booster installation kit to position the lightning arrestor so the cable from the repeater could exit one of the 2″ conduits and bend around and connect to it.  LMR-400 is a low loss, 50 ohm impedance, coaxial cable that can handle high RF transmit power.  The cellular booster only has a 1 Watt transmitter but is operating at frequencies where energy losses in coax cables become significant.  To do what it does LMR-400 is just under 1/2″ in diameter.  It is fairly stiff and does not make sharp bends so cable runs and connections have to be carefully planned.

The other lightning arrestor was for the Antennas Direct DB8e OTA TV antenna and serves a dual purpose as the power insertion device for the tower mounted amplifier.  The coax cable for OTA TV signals is typically 75 ohm impedance RG-6 with F-connectors.  It is half the diameter of LMR-400 and much more flexible.  It is also typically used to receive low power signals and convey them in one direction; from the antenna to the TV.  Because we are 25 miles from the nearest TV tower and some of the towers are 50+ miles away, I ordered a signal amplifier to go with the antenna.

Ideally you want to amplify an OTA TV signal as soon as it comes out of the antenna and this amplifier does just that.  It will mount on the same tower leg as the antenna about two feet below the antenna feed point.  However, being an active electronic device it needs electrical power to operate.  There are two basic ways that could be done.

One way would be to have power wires, such as +5 VDC and DC Ground that are separate from the coaxial cable that carries the radio frequency (RF) energy.  The two OTA TV antennas on our bus are set up this way with three wires to supply power and control the enclosed rotor.

The other way is to provide DC power through the coaxial cable itself, which is how this amplifier is set up.  The nice thing about this arrangement is that the amplifier only has two connections and they are both coax connectors that can be weather sealed.  To get the DC power into the coax cable, however, requires a special device called a power inserter.  The power inserter, in turn, requires the coax to be split into two segments so there end up being four connections instead of two.  The power inserter for this amplifier very conveniently acts as a lightning arrestor as well, which is why I mounted it to the copper back plane in the cable entrance box.

By boosting what I presume will be weak signals from distant towers the amplified signal should be strong enough to survive the trip through the coax cable to the power inserter, from there to a 1-in/2-out signal splitter, and then through additional lengths of coax to the two TV sets.

After getting the two lightning arrestors mounted in the cable entry box I took a break for lunch and then went to Lowe’s for some supplies.  When I got back home I turned my attention to mounting the SureCall Fusion5s cellular booster (repeater amplifier) in the sump pump room.  The sump pump is in the northeast corner of the basement, which is also the northeast corner of our ham shack and office.  (The ham shack occupies the north wall and my desks occupy the east wall.  Most of the rest of the room is storage.)

I gutted and rebuilt this space, with the help of long-time friend John Rauch, before we moved in and created the large closet (small room) around the sump with insulated walls to contain sounds.  I installed an electrical sub-panel in this room to provide power to the office and ham shack desks and to an RV outlet by the pull-through driveway.  I fed the power for the RV outlet through the bond on the east wall just above the concrete block foundation and ran it underground to the far side of the driveway.  It was my intention from the beginning to mount a cable entrance box next to the power feed and have all of the coax cables and control wires for outside devices enter the sump pump room in the same manner as the power.

The ham shack/office walls are finished with T-111 exterior plywood with 4″ groove spacing and I finished the interior of the closet the same way as I knew I would eventually want to mount things to the walls.  I mounted the SureCall Fusion5s booster on the west wall of the closet about a foot inside the door and just below my eye level so I could see all of the connectors, switches, and indicator lights on the top and front of the unit.  It had four mounting tabs, two top and two bottom, that attached easily to the wall with short wood screws.

There is a duplex AC electrical outlet on that wall and one on the opposite (east) wall.  The power supplies for the cellular booster and OTA TV antennas will plug in to these along with the sump pump and the charger/controller for the battery powered backup sump pump.  One of the things I bought at Lowe’s were two outlet expanders which I installed in these two duplex outlets.  I also bought a switch with a pilot light to replace a single pole Decora switch that will eventually control the light in the closet.  I installed the switch but did not complete the wiring as I have to tie it in to the light fixture which requires me to cut the power to that circuit.   I would also like to replace the bare bulb fixture while I am at it but have not yet purchased a replacement.

Although it was late afternoon I decided to install the inside antenna for the cellular booster system and run the coaxial cable that connects it to the booster.  The antenna is designed to mount to a flat ceiling and provide a hemispherical coverage area below the plane of the ceiling.  I had previously figured out that if I mounted this antenna in the main floor hallway near the midpoint of the house I could connect it to the cellular amplifier using a 50 foot length of coax cable that came with the system.

The desired mounting location was opposite the door to the hall closet and the access to the attic is through the ceiling of that closet, so that was very convenient.  We emptied the closet, removed the clothes rod, and setup our six foot step ladder.  I removed the piece of foam insulation we currently use to seal the attic access opening and climbed up, flashlight in hand to check out what was on the other side of the ceiling.

Our desired location for the antenna was free of problems on the back side so I drilled a 3/4″ hole for the mounting stud and used a piece of rebar to poke a hole through the insulation for the coax cable that came out of the stud.  Linda fed the coax and stud through the hole and I put the retaining nut on the stud from the attic side of the ceiling.  The antenna is shaped like a coffee filter, is about six inches in diameter at the ceiling, and tapers down to about four inches in diameter about four inches from the ceiling.  The housing is white plastic and blends in well with the ceiling paint.

About four feet from where we installed the antenna is a chase that runs from the attic to the furnace room in the basement.  It appears that once upon a time something having to do with the furnace ran through this chase, such as the combustion air intake.  The combustion air is now drawn through the back wall under the deck and the exhaust goes out through the east wall of the basement via a double wall stainless steel flue pipe.  The chase is no longer used for furnace or other utilities although there are electrical cables to switches mounted in the bathroom walls and it still contained a piece of 4″ plastic pipe.

I positioned myself near the chase and guided one end of a 50 foot length of LMR-400 coax down through the pipe and through the hole into the furnace room while Linda held the roll of coax near the top of the ladder and unrolled it.  At one point the coax bunched up and Linda had to go to the furnace room and untangle it.  At another point the 4″ plastic pipe slipped through the bottom hole into the furnace room which caught me by surprise.  Once the cable was mostly fed through I routed it to the location of the antenna, connected it to the pigtail coax from the antenna, wrapped the connection in weather seal tape to keep moisture out, and secured it with a cable tie.

With the antenna installed Linda started preparing dinner while I dealt with the 37 feet of coax in the furnace room.  The furnace room does not have a finished ceiling so I had access to the areas above the suspended ceilings in all of the adjacent rooms.  In particular I was able to feed the free end of the coax above the ceiling in the office and into the sump pump room.  I secured the cable with plastic cable ties at two points in the furnace room to keep it away from the flue and various hot water pipes.  I had about 8 extra feet of cable so I made a large coil with two loops such that the free end came off the loop straight down into the connector on top of the booster.  I hung the coil on the wall above and to the right of the booster making for a very neat installation.

I took a shower to try and get rid of some of the fiberglass itch while Linda finished the dish she was making for dinner.  It was a complex Indian style dish with Basmati rice, garbanzo beans, Swiss chard, onions, and shallots, seasoned with salt, black pepper, cayenne pepper, cumin seeds, garam masala, fresh lemon (zest and juice), and fresh dill that Linda grew herself.  The house was filled with the aromas of all these ingredients for a couple of hours as they were prepared and combined into the final dish.  It tasted as good as it smelled with many flavor layers.

Our beautiful blue sky gave way to high, thin clouds through the morning and then to lower, thicker clouds during the early afternoon.  By 2 PM the clouds to the west were dark as I drove to Lowe’s in Howell and the first, heavy rains came as I got to the parking lot.  I waited a few minutes and they stopped so I got into the store without getting wet.  I had the same good fortune on my way back to the car.  The sustained rains came later in the evening along with a tornado watch.  We went to bed before 10 AM but did not go to sleep.  It took me a long time to write this post and we kept a watchful eye on the weather radar.  Although thunderstorms were forecast as a certainty from 1 to 5 AM with the possibility that they might be severe, we finally turned the lights out around 12:45 AM and tried to get some sleep.

 

2015/06/21 (N) Father’s Day

Leave a reply

Today was Father’s Day and also the summer solstice, which is the official start of the summer season.  Climatologically and culturally, at least in this part of Michigan, summer is more closely aligned with the period from Memorial Day weekend through Labor Day.  The summer solstice is, of course, the day with the most hours of daylight but it is not the day with the earliest sunrise nor the day with latest sunset.  Regardless of that detail, one of the things I like about this time of year is that the evening twilight lasts for a long time and fades to the blackness of night very slowly.  By contrast, the sun seems to set quickly in the winter and it gets dark very quickly after that.

Linda arranged for our son and daughter, and their families, to come over for brunch today.  It was a combination Father’s Day and happy birthday gathering as our daughter was out of town last week on her 34th birthday.  Linda spent last evening cooking, which minimized the amount of work required today.  I requested pie for Father’s Day and she found an excellent recipe for a vegan apple pie with a crumb topping.  She also made a dozen small chocolate birthday cupcakes.  The star of the show, however, was a Baked French Toast made with French bread and topped with streusel of ground pecans, cinnamon, brown sugar, and nutmeg with vegan “butter.”  It soaked overnight and all she had to do this morning was bake it.  She made a large bowl of fresh berries (strawberries, blueberries, and black and red raspberries) and sliced up some cantaloupe.

Company was due at 10 AM so I made a full pot of our Cafe Europe half-caff blend coffee.  We each had a cup and Linda transferred the rest of it to our insulated dispenser.  I was brewing a second pot when Meghan and Chris arrived around 9:45 AM followed by Brendan, Shawna, and Madeline around 10 AM.  Birthday and Father’s Day cards were exchanged but Madeline was the center of attention.  She pulled out her toy box and built a Lego tower with her aunt Meghan.  We walked around outside a bit, looked at the new roof and the cable entrance box, and played hide and seek in the backyard with Madeline doing the seeking, assisted by her mom.  I was hiding behind our gas grill, which had a cover on it.  Madeline saw my reflection in the rear door walls of the library, walked right past me towards the reflected image, turned away from my location, and was walking back towards Shawna before she spotted me.  Reflections are one of those things that we have to learn about.

The French Toast was done baking at 11 AM and we sat down to a fabulous brunch that included Prosecco and orange juice.  The Baked French Toast was outstanding and everyone had more than one piece.  By 12:30 PM no one was hungry for dessert so Linda packaged up four cupcakes for Meghan and Chris and four cupcakes for Brendan, Shawna, and Madeline along with a quarter of the pie for each group.  By 1 PM Madeline was showing signs of being tired, that being her normal nap time, so everyone gathered up their things and made their way to their cars.

After everyone had left we had some pie.  It was also outstanding, as good as any non-vegan pie I have ever had and, frankly, better than most.  Linda went for a walk while I settled in to finish the draft of yesterday’s blog post and start writing this one.  When Linda got back from her walk she read for a little while and then took a well-deserved nap.  By 4 PM I could not keep my eyes open and took a nap that lasted until 6 PM.  I have never been into “Hallmark Holidays” but I like Father’s Day.  🙂

For dinner Linda made a salad and reheated the last of the angel hair pasta and black beans and rice.  We each had one of the vegan cupcakes for dessert.

Today was my dad’s 90th birthday so after dinner I called to wish him a combined happy birthday and Father’s Day.  He did not answer, which is not unusual as without his hearing aids he doesn’t hear the phone ring.  I left him a voice message.

I have been busy enough with things the last two years that I have not read any of the magazines we receive as part of our various organizational memberships.  Tonight I went through the July 2015 issue of QST, the monthly publication of the American Radio Relay League (ARRL).  Although my main focus this summer is the remodeling of the interior of our motorcoach, I am trying to get ham radio antennas up and useable.  We are also trying to get a base built for the 70 foot tower we bought last summer, get the tower assembled and erected, and at least get some sort of HF wire antenna attached to it.

Linda was tired by 10 PM and trundled off to bed.  As a result of my nap I was not sleepy and stayed up using my iPad until well after midnight.

 

2015/06/20 (S) Cable Entry Box

Leave a reply

We had not been to our local ham radio club breakfast the last two Saturdays because of the GLAMARAMA rally and a visit from Linda’s brother, Ron, and his wife, Mary.  The club was conducting VE testing today, rather than the usual 4th Saturday of the month, because the ARRL Field Day event is next weekend.  When we got to breakfast at 8 AM there were already a lot of people there and seven more came in after us.  We did not take a head count but it was somewhere between 25 and 30 people.  We also did not have our usual waitress but the substitute very efficiently got everyone’s order taken and delivered.

The 40 foot tower on the east end of the house with the old OTA TV antenna on top.

The 40 foot tower on the east end of the house with the old OTA TV antenna on top.

I checked with Mike (W8XH) and he is available to help us get the antennas mounted on the small tower on Monday or Wednesday, assuming I have the cable entry box (CEB) installed and all of the necessary coaxial cable on hand.  Getting the CEB mounted was my main goal for today, but not the first thing I had to do.  I called Chuck as we were leaving breakfast at 9:15 AM.  He was at home and suggested we stop by there and pick up a key to his shop.  He was working on landscaping when we arrived so we did not stay long and we were back home by 10 AM.  Linda finalized her shopping list and headed off to gather the things she needed to prepare tomorrow’s brunch.  I changed into my work clothes, gathered up the laundry, put a load in the washer, and got to work on the CEB.

The CEB is designed to mount on the outside of the house, allowing wiring to pass between the inside and outside of the house in a way that is weather tight and animal proof.  Coaxial RF cables and control lines enter through the bottom, connect to lightning arrestors in the CEB that provide a path to ground if/when needed, and then continue through the wall of the house and thence to various devices.  Those devices might include cellular phone signal boosters, Wi-Fi systems, TV sets, satellite receivers, personal weather stations, or amateur radio gear such as radios, remote antenna switches, and antenna rotators.

The general area on the east end of the house at the base of he 40' tower where the CEB will be mounted.

The general area on the east end of the house at the base of he 40′ tower where the CEB will be mounted.

Superficially the installation looked simple.  With the copper back plane removed there were four mounting holes, one near each corner, and two large holes in the back.  All we had to do was hold the box against the wall, mark the locations of the four mounting holes and the big cable entry holes, set the box aside, drill the holes, put the box back up and secure it.  Right.  Sort of, but not exactly.  Mounting the box took seven hours to complete.

The first step was to remove the copper back plane with the three lightning arrestors installed on it.  I took care of that yesterday.  The next issue was that the house has shiplap siding, i.e., the east wall where I needed to mount the CEB was not a flat surface.  I decided to use 1″ square aluminum tube, installed vertically along the back of the box at the outside edges, to span multiple siding boards, ensuring that the CEB would be plumb.  I also decided to leave the tube long enough to go all the way to the ground and use it to support some the weight, in effect creating legs for the CEB.  That was Linda’s idea.  She’s a smart girl and a licensed amateur radio operator.

The back of the CEB with one of the vertical mounting bars.

The back of the CEB with one of the vertical mounting bars.

We had some surplus pavers and garden blocks and I found one that was just wide enough to catch the bottom of the legs.  I also had some left over paver base material, which meant I did not need to make a trip to the store.  The paver base material was from a project long, long ago (in a place far, far away) and I used it to create a base for the foundation paver, which was approximately 18″ x 12″.  I leveled the base side-to-side and pitched it away from the house for drainage.

Yesterday I purchased a 3′ long aluminum tube at Lowe’s and a 4′ long tube at The Home Depot.  Three feet turned out to be a good length, so I cut a foot off of the 4′ tube.  Things then got trickier.  The positioning of the CEB was critical as the two large holes in the back were for adapters for 2″ plastic conduit.  I was going to have to cut 3″ diameter holes through the bond that would come out above the plate on top of the concrete block foundation.  In the chosen mounting location the bottom corner holes in the CEB would be below the siding.  The lower right leg would be at least an inch away from the concrete block foundation and the lower left hole would be in front of a basement window opening so neither of these were going to be screwed into anything.

The CEB in position on the east end of the house with the door open. The copper backplane has been removed.

The CEB in position on the east end of the house with the door open. The copper backplane has been removed.

I wanted the CEB anchored at more than two points so I decided to drill two additional holes in the back, one on each side, approximately half way between the existing top and bottom holes.  I measured the spacing between the top and bottom holes as carefully as I could.  I measured down from the top end of each leg a distance for the top holes that was just sufficient to make sure the door of the CEB was below the 2″ iron gas pipe that runs horizontally along the outside of the house.  I measured down from there for the new middle hole and the bottom hole.  I then drilled the three holes through each leg by drilling opposing sides.  I had to use a powered hand drill for this work as my drill press was stored behind a large pile of RV furniture that we took out of the bus and was inaccessible.

I attached one of the legs to the back of the box using two short bolts through the top and bottom holes.  I then used the middle hole in the leg as a guide and drilled through the back of the CEB.  I repeated this procedure for the other leg.  I drilled the holes in the legs as accurately as I could but they did not quite line up so I had to enlarge them slightly by using the drill bit like a router bit.  Not ideal, to be sure, but aluminum is relatively soft and it worked.

The east end of the house with two 2" holes for the conduit.

The east end of the house with two 2″ holes for the conduit.

I attached each leg to the back of the CEB using 1.5″ 1/4-20 bolts through the bottom corner holes.  I snugged these up but left them loose enough that we could move the legs.  The top and middle holes were located in positions that would allow lag screws to be screwed into the siding and underlying plywood.  We had to tilt the legs to get them under the 2″ iron gas pipe and then straighten them and set them on the foundation paver.  We had to do this multiple times but it was easy once we figured out how to do it the first time.

With the CEB in position I marked the location of the holes for four 3″ 1/4-20 lag screws.  We removed the CEB so I could drill the holes for the lag screws and then put it back in position and screwed it to the wall.  I marked the locations of the two holes for the conduit as best I could and then unscrewed the box and removed it again.  I used our 1/2″ Craftsmen corded drill for the 3″ hole saw.  I bought this drill in 1978, along with a lot of other Craftsmen tools, when we moved into our house in Farmington Hills.  I still have almost all of those tools and they all still work.

The CEB in position with both pieces of conduit through the back.

The CEB in position with both pieces of conduit through the back.

With the conduit holes drilled I cut one of the 18″ lengths of conduit in half, inserted the pieces into the adapters, and placed them in the holes.  We then put the CEB into position, got the adapters through the holes in the back of the CED, and tried to line up the holes in the legs.  The conduit was being forced up as it went through the bond, especially the one on the left, and would not allow the holes in the CEB to line up with the holes in the legs.  We took the retaining rings off of the adapters and removed the CEB, again.

I shortened the conduit pieces to approximately 5″ and checked the fit in the holes.  We wrapped two bands of adhesive backed foam weather-stripping around each piece of conduit and placed them back in the holes.  I then applied a bead of adhesive caulk all the way around each adapter at the wall.  We put the CEB in position for the final time, got the conduit adapters through the holes, snugged up the retaining rings, and put the four lag screws in.  After tightening the four lag screws I tightened the two bolts in the lower corners.  I then tightened the adapter retain rings and put the open end caps on.  The conduit ended up getting pulled back out of the wall a bit so I used the thin end of a 10″‘wood shim to try and force the caulk back into the gap around the conduit adapter.  It did not go back in very well so I will have to figure out something else to seal around the conduit.

The CEB was finally installed and very solidly anchored.  I got the copper base plate and remounted it to the five studs (four corners and one center) using some antioxidant/anti-seize compound on the stud threads.  The last step (for today) was to install the snap in covers for the 16 cable entrance holes in the bottom of CEB.  I also ordered 16 grommets and will remove the caps and replace them with grommets as I install devices and run their cables and wires into the CEB.

The CEB with the copper backplane installed and the three Morgan lightning arrestors mounted (two lower left, one top center).

The CEB with the copper backplane installed and the three Morgan lightning arrestors mounted (two lower left, one top center).

The two pieces of conduit open into the sump pump room (large closet) in the northeast corner of the basement just above the wood plate that sits on top of the concrete block foundation.  I plan to install the SureCall Fusion5s 5-band cellular booster (amplifier) in this room to keep it close to the CEB and because there is AC power available there.  I bought an installation kit for the Fusion5s that includes a lightning arrestor which will get mounted in the CEB.  I also bought an amplifier for the OTA TV antenna that will mount on the tower a few feet below the antenna.  The amplifier will get its power through the coax from a power inserter that doubles as a lightning arrestor and will be installed in the CEB with the AC power supply (wall wart) in the sump pump room.

I did not get these two additional lightning arrestors installed today.  By the time we got the CEB installed we were tired.  The high temperature was OK (near 80?) but the relative humidity was very high.  I was also very sore the whole time, especially my left knee, undoubtedly the lingering after effect of using the power chisel earlier in the week to remove thinset and mastic from the floor of the bus.  Getting down and up at least 50 times during the afternoon did not improve matters, but we got it done.

Even though she was also tired, once we reached a point where I could finish up alone Linda got busy making several food items for tomorrow.  In the midst of all that she heated some Amy’s Lentil Soup and made grilled cheese sandwiches with Diaya cheese or dinner.  Diaya makes an excellent non-dairy cheese that works well cold or cooked into dishes.

After dinner I returned a call from Butch to find out more about their new property and buildings, and discuss bus and ham radio projects.  One of the things Linda made was an apple pie so we stayed up until it was cool enough to wrap up.  That turned out to be 10 PM, by which time we ready to turn in for the night.

 

2015/06/19 (F) Roof Box

Leave a reply

The Apex roofers were back again this morning just before 8 AM and we were up and ready for them.  I made coffee but we deferred breakfast until after we settled the bill with owner Pat Davidson.  By 9 AM he knew what the added costs were over and above the base quote.  The major one was the 32 sheets of plywood they used to repair/replace bad areas of the roof deck.  He left around 10 AM and took half the crew with him to start another job.  The other four guys stayed behind and finished roofing the garage and cleaning up the job site.  The job was pretty much wrapped up by noon.  Sergio (the foreman) did the final walk-around and cleanup and left around 1 PM.  There is very little evidence that they had been here except for an attractive new roof and two skylights in the living room that light up the space in a nice way.

I spent the morning inventorying coaxial cables.  We have quite an assortment of 50 and 75 ohm cables in lengths from 1 to 100 feet.  I need to have all the necessary cables on hand when I climb the tower next week to remove and install antennas.  If we already had appropriate cables I wanted to use those instead of buying new ones.

The custom cable entry box from Chris at KF7P Metalwerks arrived today.  I opened it after lunch, which consisted of fresh apples and leftover black beans and rice.  We both agreed that the beans and rice dish was even better than when it was fresh.  We unpacked all of the parts that were stored inside the cable entry box and checked them off against the spreadsheet I used to order them.  Everything was there but I was initially concerned because the box was turned 90 degrees from what I ordered.  I specified a 16″ wide by 20″ tall box but got a 20″ wide by 16″ tall instead.  I suspect that Chris buys the boxes with the door/hinge already attached but it would have been nice to know that ahead of time.

We took the box outside and held it in place to see if it would be usable.  The lower left corner will hang down in front of the basement window in the sump pump room but that will be OK.  The horizontal orientation of the box will actually make it easier to get coaxial cables through the access holes in the bottom.

There were two a Morgan Lightning arrestors mounted on the copper back plane for amateur radio use; one for HF and one for VHF/UHF.  The UHF arrestor was upside down so I unscrewed it, rotated it 180 degrees, and screwed it back down.  The box also had a Morgan M-348 lightning arrestor.  I ordered an M-348B, which is the 12-wire version, but the installed arrestor had 12 terminals on top (3 strips of 4 each) plus one on each side.  There were no instructions, however, on how to wire it up so I sent Chris an e-mail regarding the anomalies and missing information.

While I was working on that e-mail, and a couple from Josh at Coach Supply Direct, we got a call from Curtis Coleman of RVillage.  The development team had launched some new features and he wanted to walk me through them.  He had just been to Prevost in Nashville for some repairs on his tag axle brakes and was headed back to Cleveland, Ohio.  He thought he might be headed in our general direction after that.

I spent some time thinking about how to mount the cable entry box on the east wall of the house which is sided in a shiplap fashion, i.e., the horizontal siding boards are angled (not plumb) and overlapped.  I needed a hole saw and arbor for my 1/2″ drill to drill the holes for the two 2″ conduits that will pass from the box through the bond into the sump pump room in the basement.  I probably already have one but I cannot get to most of the stuff in the garage and can’t afford to delay getting this box mounted; there are too many other things that need to get done that require this box to be in place first.

I was suffering from a decided lack of patience which is not the proper frame of mind for working on scale drawings of custom furniture so I went to Lowe’s to get a hole saw.  The fitting measured 2-3/4″ OD and I decided to get a 3″ hole saw just to make sure the hole would be big enough.  While I was at the store I considered how I might use different materials to mount the box.  I ended up buying a 36″ length of 1″ square aluminum tube and some stainless steel lag screws, bolts, washers, and Nylok nuts. My plan was to cut the tube into two 18″ pieces and use them in a vertical orientation between the box and the house.  They would span multiple boards, creating a plumb mounting surface, and provide support for the lower left corner which would otherwise be unsupported.

When I got back to the house I took the tube out to see how it would work.  The idea was a good one but the 18″ lengths would be too short.  I bought the only piece of 1″ tube that Lowe’s had so I knew I would have to find another one somewhere else.  Linda suggested that we try the Lowe’s in New Hudson after breakfast tomorrow but I was still feeling impatient about the whole thing.

I had a long chat with Michele Henry from Phoenix Paint.  I then relaxed with a small glass of Moscato, a nice pre-meal wine, while Linda prepared a wonderful dish for dinner of roasted red potatoes with onions, garlic, rosemary, and power greens.  It was a simple dish but so delicious and hearty.

The meal concluded and the table cleared I went to The Home Depot in Howell where I found a 48″ length of 1″ square aluminum tube.  If 24 inches turns out to be long enough to support the box the way I want I will cut the 48″ piece in half and return the 36″ piece to Lowe’s.  I called Chuck on the drive home to follow up on a text message I sent him yesterday regarding the delivery of our new refrigerator to his bus garage in Novi.

Feeling like I had finally accomplished something today we relaxed for an hour and then settled in to watch a movie.  Linda had borrowed the DVD of Wild, starring Reese Witherspoon, from the Howell Library earlier in the week and we reserved this evening as movie night.

My goal for tomorrow is to get the cable entry box installed.  That sets the stage for climbing the tower and installing three antennas once I have the proper coax cables and some rope to temporarily guy the tower.  But those details will wait until Monday as family is coming to brunch on Sunday for Father’s Day and a belated birthday celebration for our daughter.